FreeBSD-stable-15-amd64-test - Build #29 - Failure
Date: Wed, 08 Oct 2025 04:24:34 UTC
FreeBSD-stable-15-amd64-test - Build #29 (9fd3b28d4e0d634d82b5233fbd5b1f6c7741141a) - Failure
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/29/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/29/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-15-amd64-test/29/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
9fd3b28d4e0d634d82b5233fbd5b1f6c7741141a by rmacklem:
heimdal-kadmin: Add support for the -f dump option
The end of the build log:
[...truncated 4.33 MiB...]
epair0b: Ethernet address: ca:42:91:09:5a:d7
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 9e:1d:e1:d1:88:95
epair1b: Ethernet address: 16:33:25:0c:ac:c6
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.170s]
sys/netpfil/pf/nat64:tcp_in_floating -> epair0a: Ethernet address: be:c4:2a:78:3f:07
epair0b: Ethernet address: 5e:04:1d:6c:a6:70
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 3a:60:14:04:58:18
epair1b: Ethernet address: 1a:f4:00:93:5e:96
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.161s]
sys/netpfil/pf/nat64:tcp_in_if_bound -> epair0a: Ethernet address: 26:24:78:2c:d9:98
epair0b: Ethernet address: 36:aa:d6:a4:3e:cb
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: aa:08:c0:68:8d:a7
epair1b: Ethernet address: ee:f4:fd:b8:86:41
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.165s]
sys/netpfil/pf/nat64:tcp_out_floating -> epair0a: Ethernet address: f6:93:a7:cd:8f:25
epair0b: Ethernet address: ee:aa:67:88:bc:2f
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:ba:cd:f9:da:f3
epair1b: Ethernet address: 1a:e1:75:1d:92:6b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.161s]
sys/netpfil/pf/nat64:tcp_out_if_bound -> epair0a: Ethernet address: 0e:22:bf:58:38:c7
epair0b: Ethernet address: a2:5c:c5:ab:09:ff
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 3e:9c:46:4c:50:ea
epair1b: Ethernet address: ce:76:ce:62:6d:13
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.160s]
sys/netpfil/pf/nat64:tos -> epair0a: Ethernet address: ea:d6:37:b0:79:f7
epair0b: Ethernet address: ca:e6:7a:06:8d:34
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: ae:b5:ae:cf:e2:af
epair1b: Ethernet address: ba:44:07:e6:f1:8f
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.177s]
sys/netpfil/pf/nat64:udp_in -> epair0a: Ethernet address: 9a:2e:28:ae:2b:07
epair0b: Ethernet address: a2:4a:d6:fe:98:ef
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 06:a8:50:58:86:e9
epair1b: Ethernet address: 56:e5:d1:0a:e0:71
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.159s]
sys/netpfil/pf/nat64:udp_out -> epair0a: Ethernet address: 66:91:da:c5:88:dc
epair0b: Ethernet address: 7e:b7:65:0e:a0:b3
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 4e:18:86:51:5a:08
epair1b: Ethernet address: 12:80:24:23:69:79
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.177s]
sys/netpfil/pf/nat64:v6_gateway -> epair0a: Ethernet address: 42:e3:52:6a:51:12
epair0b: Ethernet address: 4a:53:38:5e:e6:99
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 26:3a:92:a9:d8:00
epair1b: Ethernet address: 2e:b4:ad:87:d0:d8
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: fa:b7:07:f9:70:ca
epair2b: Ethernet address: 86:15:80:6d:64:f6
epair2a: link state changed to UP
epair2b: link state changed to UP
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
failed: atf-check failed; see the output of the test for details [0.257s]
sys/netpfil/pf/nat64.py:TestNAT64::test_address_unreachable -> epair0a: Ethernet address: da:8c:3f:2b:02:70
epair0b: Ethernet address: ca:99:aa:8c:5e:2a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: b2:72:af:da:0b:83
epair1b: Ethernet address: 32:b7:1b:38:65:90
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 86:7e:c8:5a:80:69
epair2b: Ethernet address: 1e:68:e9:ef:53:2c
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
lo0: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
failed: /usr/tests/sys/netpfil/pf/nat64.py:173: AttributeError [5.791s]
sys/netpfil/pf/nat64.py:TestNAT64::test_bad_len -> epair0a: Ethernet address: 7e:e4:2d:8d:df:3a
epair0b: Ethernet address: a2:ef:4c:30:cd:43
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 16:79:73:40:e9:9f
epair1b: Ethernet address: 0e:35:b0:66:60:ac
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 42:7a:5a:42:5e:cc
epair2b: Ethernet address: e2:c3:f6:94:b8:00
epair2a: link state changed to UP
epair2b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
lo0: promiscuous mode enabled
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x18
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80c0f132
stack pointer = 0x28:0xfffffe008aef2980
frame pointer = 0x28:0xfffffe008aef29c0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1: netisr 0)
rdi: fffffe008aef29d8 rsi: fffff8010b2cf896 rdx: 00000000ffffffff
rcx: 0000000000008466 r8: fffffe008aef2900 r9: 0000000000000003
rax: 0000000000000000 rbx: 0000000000000000 rbp: fffffe008aef29c0
r10: 0000000000000001 r11: 0000000000000000 r12: 0000000000000000
r13: 000000000000000b r14: 000000000000000b r15: 00000000000001f5
trap number = 12
panic: page fault
cpuid = 1
time = 1759897446
KDB: stack backtrace:
#0 0xffffffff80bc033d at kdb_backtrace+0x5d
#1 0xffffffff80b73726 at vpanic+0x136
#2 0xffffffff80b735e3 at panic+0x43
#3 0xffffffff8107bf69 at trap_pfault+0x3c9
#4 0xffffffff81051a88 at calltrap+0x8
#5 0xffffffff80d84b19 at in6_cksum_partial_l2+0x109
#6 0xffffffff8295cab5 at fr_cksum+0xa5
#7 0xffffffff829621dd at ipf_checkl4sum+0xbd
#8 0xffffffff829586f6 at ipf_checkv6sum+0x56
#9 0xffffffff8295a601 at ipf_makefrip+0x1691
#10 0xffffffff8295b6de at ipf_check+0x15e
#11 0xffffffff82958c28 at ipf_check_wrapper6+0x58
#12 0xffffffff80cc3438 at pfil_mbuf_in+0x38
#13 0xffffffff80d92b94 at ip6_input+0x484
#14 0xffffffff80cc0c98 at swi_net+0x128
#15 0xffffffff80b2d359 at ithread_loop+0x239
#16 0xffffffff80b298eb at fork_exit+0x7b
#17 0xffffffff81052aae at fork_trampoline+0xe
Uptime: 1h44m14s
Automatic reboot in 15 seconds - press a key on the console to abort
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-15-amd64-29' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
x ./run.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-15-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-15-amd64-test] $ /bin/sh -xe /tmp/jenkins6666357500026690348.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-15-amd64-test', 'commit': '9fd3b28d4e0d634d82b5233fbd5b1f6c7741141a', 'branch': 'stable-15', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-15/latest_tested/amd64/amd64 -> ../../9fd3b28d4e0d634d82b5233fbd5b1f6c7741141a/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address