FreeBSD-main-amd64-test - Build #27519 - Failure
Date: Tue, 30 Dec 2025 07:47:39 UTC
FreeBSD-main-amd64-test - Build #27519 (7685aaea8850f5b6995a17740a016019e0956c70) - Failure
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27519/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27519/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/27519/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
efcb109940ca607130af4498e1e33b54c58ba43c by kib:
vm_object_coalesce(): remove commented out code
e7053d9a126a60b3c0b1348b6c5131b5f2025894 by kib:
vm_object_coalesce(): simplify common expression
353ba3bf08fdef69b77e3e565435e50784a51412 by kib:
vm_object_coalesce(): do not account holes twice
7685aaea8850f5b6995a17740a016019e0956c70 by kib:
vm_object_coalesce(): return swap reservation back if overcharged
The end of the build log:
[...truncated 4.30 MiB...]
epair1a: Ethernet address: 6e:f1:05:f3:ce:25
epair1b: Ethernet address: b2:b1:91:3f:83:36
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [22.989s]
sys/netpfil/pf/mbuf:ethernet_in_mbuf_len -> epair0a: Ethernet address: d2:88:67:56:20:60
epair0b: Ethernet address: b6:15:5b:fb:88:7a
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [1.312s]
sys/netpfil/pf/mbuf:inet6_in_mbuf_len -> epair0a: Ethernet address: 0e:bf:78:3e:f4:5e
epair0b: Ethernet address: 06:bb:2e:e3:db:17
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [5.654s]
sys/netpfil/pf/mbuf:inet_in_mbuf_len -> epair0a: Ethernet address: be:4b:29:06:1e:dc
epair0b: Ethernet address: 76:c3:ee:f6:58:7c
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [1.299s]
sys/netpfil/pf/mld.py:TestMLD::test_router_alert -> epair0a: Ethernet address: ce:1f:8d:8d:e5:e7
epair0b: Ethernet address: 8a:ea:e6:4a:88:79
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
lo0: link state changed to UP
epair0a: promiscuous mode enabled
Invalid MLD
epair0a: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [6.873s]
sys/netpfil/pf/modulate:modulate_v4 -> epair0a: Ethernet address: 4a:6b:8d:78:b0:34
epair0b: Ethernet address: 3a:cb:59:03:5a:46
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 1e:86:35:74:c8:28
epair1b: Ethernet address: 72:6c:76:79:2e:ed
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [5.024s]
sys/netpfil/pf/modulate:modulate_v6 -> epair0a: Ethernet address: 3e:e1:91:0c:81:92
epair0b: Ethernet address: 6a:e7:bb:39:9e:ed
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 3a:4c:20:2d:a0:47
epair1b: Ethernet address: 2e:1e:1f:e7:1d:83
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [5.028s]
sys/netpfil/pf/names:group -> epair0a: Ethernet address: fa:2b:6d:c2:5c:5d
epair0b: Ethernet address: f2:af:34:58:c2:a2
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [0.175s]
sys/netpfil/pf/names:names -> epair0a: Ethernet address: 16:40:78:db:df:69
epair0b: Ethernet address: 52:c8:c5:cf:2a:76
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: changing name to 'foo'
epair0b: changing name to 'foo'
foo: link state changed to DOWN
foo: link state changed to DOWN
passed [0.360s]
sys/netpfil/pf/nat:binat_compat -> epair0a: Ethernet address: 7a:25:35:97:f9:0a
epair0b: Ethernet address: 9e:3e:a5:ef:ba:dd
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 9a:a5:a7:17:77:3d
epair1b: Ethernet address: 72:8d:48:a8:2c:da
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode enabled
epair1b: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [2.135s]
sys/netpfil/pf/nat:binat_match -> epair0a: Ethernet address: c2:9c:5c:c5:72:34
epair0b: Ethernet address: 3e:6a:12:30:9a:30
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 82:15:b9:74:38:90
epair1b: Ethernet address: 1a:62:30:0d:00:4f
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode enabled
Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address = 0x30
fault code = supervisor read data, page not present
instruction pointer = 0x20:0xffffffff80cd17d8
stack pointer = 0x28:0xfffffe008be47c80
frame pointer = 0x28:0xfffffe008be47cf0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (epair_task)
rdi: fffffe0082bf6a00 rsi: fffffe008be47c98 rdx: 0000000000000001
rcx: 0000000000000942 r8: 0000000000000002 r9: fffff80169b88880
rax: 0000000000000000 rbx: fffff80167798c00 rbp: fffffe008be47cf0
r10: 0000000000000000 r11: 0000000000000001 r12: fffff800034f6800
r13: fffff800237ba780 r14: fffff801482b5080 r15: 0000000000000000
trap number = 12
panic: page fault
cpuid = 0
time = 1767080857
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008be479b0
vpanic() at vpanic+0x136/frame 0xfffffe008be47ae0
panic() at panic+0x43/frame 0xfffffe008be47b40
trap_pfault() at trap_pfault+0x47c/frame 0xfffffe008be47bb0
calltrap() at calltrap+0x8/frame 0xfffffe008be47bb0
--- trap 0xc, rip = 0xffffffff80cd17d8, rsp = 0xfffffe008be47c80, rbp = 0xfffffe008be47cf0 ---
bpf_mtap() at bpf_mtap+0x98/frame 0xfffffe008be47cf0
ether_nh_input() at ether_nh_input+0x109/frame 0xfffffe008be47d40
netisr_dispatch_src() at netisr_dispatch_src+0xb4/frame 0xfffffe008be47da0
ether_input() at ether_input+0xd5/frame 0xfffffe008be47e00
epair_tx_start_deferred() at epair_tx_start_deferred+0xd4/frame 0xfffffe008be47e40
taskqueue_run_locked() at taskqueue_run_locked+0x1c2/frame 0xfffffe008be47ec0
taskqueue_thread_loop() at taskqueue_thread_loop+0xd3/frame 0xfffffe008be47ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008be47f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008be47f30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 0 tid 100114 ]
Stopped at kdb_enter+0x33: movq $0,0x1213e62(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid = 0
dynamic pcpu = 0xa0b540
curthread = 0xfffff800237ba780: pid 0 tid 100114 critnest 1 "epair_task"
curpcb = 0xfffff800237bacd0
fpcurthread = none
idlethread = 0xfffff8010240c780: tid 100003 "idle: cpu0"
self = 0xffffffff82610000
curpmap = 0xffffffff81d9f4a0
tssp = 0xffffffff82610384
rsp0 = 0xfffffe008be48000
kcr3 = 0x800000000259f002
ucr3 = 0xffffffffffffffff
scr3 = 0x9ebdcd9f
gs32p = 0xffffffff82610404
ldt = 0xffffffff82610444
tss = 0xffffffff82610434
curvnet = 0xfffff80169b88880
spin locks held:
db:0:kdb.enter.panic> reset
Uptime: 1h11m9s
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-27519' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./auto-shutdown
x ./disable-dtrace-tests.sh
x ./run.sh
x ./disable-notyet-tests.sh
x ./run-kyua.sh
x ./disable-zfs-tests.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins2368961234637833731.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '7685aaea8850f5b6995a17740a016019e0956c70', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../7685aaea8850f5b6995a17740a016019e0956c70/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address