FreeBSD-main-amd64-test - Build #26220 - Failure

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26221 - Still Failing"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #26219 - Still Unstable"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Mon, 07 Apr 2025 00:39:10 UTC
FreeBSD-main-amd64-test - Build #26220 (8ef6d8ad1a61a17cdaed2f5666d5a6904fd0737c) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26220/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26220/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26220/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

8ef6d8ad1a61a17cdaed2f5666d5a6904fd0737c by kib:
jails: delegate checking PRIV_PROC_MEM_WRITE to priv_check_cred()



The end of the build log:

[...truncated 3.81 MiB...]
Limiting icmp ping response from 250 to 197 packets/sec
Limiting icmp ping response from 260 to 200 packets/sec
Limiting icmp ping response from 253 to 190 packets/sec
Limiting icmp ping response from 249 to 186 packets/sec
Limiting icmp ping response from 263 to 202 packets/sec
Limiting icmp ping response from 263 to 198 packets/sec
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [29.416s]
sys/netpfil/common/dummynet:pf_queue_v6  ->  epair0a: Ethernet address: 02:ea:1b:ea:dd:0a
epair0b: Ethernet address: 02:ea:1b:ea:dd:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [22.251s]
sys/netpfil/common/dummynet:pf_wf2q_heap  ->  epair0a: Ethernet address: 02:71:ac:08:78:0a
epair0b: Ethernet address: 02:71:ac:08:78:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:ff:5d:67:fa:0a
epair1b: Ethernet address: 02:ff:5d:67:fa:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
vlan0: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed  [3.373s]
sys/netpfil/common/forward:ipf_v4  ->  epair0a: Ethernet address: 02:80:e5:58:0a:0a
epair0b: Ethernet address: 02:80:e5:58:0a:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:e6:fa:e3:c6:0a
epair1b: Ethernet address: 02:e6:fa:e3:c6:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed  [9.103s]
sys/netpfil/common/forward:ipfw_v4  ->  epair0a: Ethernet address: 02:ff:db:4c:d6:0a
epair0b: Ethernet address: 02:ff:db:4c:d6:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:46:ea:fc:0d:0a
epair1b: Ethernet address: 02:46:ea:fc:0d:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed  [9.226s]
sys/netpfil/common/forward:pf_v4  ->  epair0a: Ethernet address: 02:d8:2f:50:3b:0a
epair0b: Ethernet address: 02:d8:2f:50:3b:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:ec:64:91:47:0a
epair1b: Ethernet address: 02:ec:64:91:47:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed  [9.213s]
sys/netpfil/common/fragments:ipf_fragments  ->  epair0a: Ethernet address: 02:c1:51:4e:ce:0a
epair0b: Ethernet address: 02:c1:51:4e:ce:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
nd6_setmtu0: new link MTU on epair0b (200) is too small for IPv6
nd6_setmtu0: new link MTU on epair0a (200) is too small for IPv6
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [11.222s]
sys/netpfil/common/fragments:ipfw_fragments  ->  epair0a: Ethernet address: 02:e9:7e:87:cf:0a
epair0b: Ethernet address: 02:e9:7e:87:cf:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
nd6_setmtu0: new link MTU on epair0b (200) is too small for IPv6
nd6_setmtu0: new link MTU on epair0a (200) is too small for IPv6
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [11.234s]
sys/netpfil/common/fragments:pf_fragments  ->  epair0a: Ethernet address: 02:20:fd:7a:09:0a
epair0b: Ethernet address: 02:20:fd:7a:09:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
nd6_setmtu0: new link MTU on epair0b (200) is too small for IPv6
nd6_setmtu0: new link MTU on epair0a (200) is too small for IPv6
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [11.264s]
sys/netpfil/common/nat:ipfnat_basic  ->  epair0a: Ethernet address: 02:ca:ae:7c:93:0a
epair0b: Ethernet address: 02:ca:ae:7c:93:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:6e:a8:4a:52:0a
epair1b: Ethernet address: 02:6e:a8:4a:52:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:98:44:7c:08:0a
epair2b: Ethernet address: 02:98:44:7c:08:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
passed  [2.486s]
sys/netpfil/common/nat:ipfw_basic  ->  epair0a: Ethernet address: 02:e1:98:06:30:0a
epair0b: Ethernet address: 02:e1:98:06:30:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:f1:87:55:e3:0a
epair1b: Ethernet address: 02:f1:87:55:e3:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:21:2d:08:61:0a
epair2b: Ethernet address: 02:21:2d:08:61:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
passed  [2.429s]
sys/netpfil/common/nat:ipfw_cgn  ->  epair0a: Ethernet address: 02:47:3f:8c:ce:0a
epair0b: Ethernet address: 02:47:3f:8c:ce:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:d2:50:9f:aa:0a
epair1b: Ethernet address: 02:d2:50:9f:aa:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:7a:14:cc:48:0a
epair2b: Ethernet address: 02:7a:14:cc:48:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
passed  [2.427s]
sys/netpfil/common/nat:ipfw_portalias  ->  epair0a: Ethernet address: 02:9d:da:88:25:0a
epair0b: Ethernet address: 02:9d:da:88:25:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:81:78:4f:45:0a
epair1b: Ethernet address: 02:81:78:4f:45:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair2a: Ethernet address: 02:57:13:28:e4:0a
epair2b: Ethernet address: 02:57:13:28:e4:0b
epair2a: link state changed to UP
epair2b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
epair2a: link state changed to DOWN
epair2b: link state changed to DOWN
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26220' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./run.sh
x ./run-kyua.sh
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins13900504261809188278.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '8ef6d8ad1a61a17cdaed2f5666d5a6904fd0737c', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../8ef6d8ad1a61a17cdaed2f5666d5a6904fd0737c/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address