FreeBSD-main-amd64-test - Build #24683 - Failure

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-main-amd64-test - Build #24684 - Fixed"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Wed, 17 Jan 2024 12:54:01 UTC
FreeBSD-main-amd64-test - Build #24683 (f59662030254e1bc4f7f135e7617e94b46385893) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/24683/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/24683/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/24683/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

e0dfe185cbcae48b4c4493ed4c2626c46181eb80 by netchild:
jail(8): add support for ZFS datasets

516b5059705b6b8bbba28821dbe05964c128f9a9 by whu:
mana: Fix TX CQE error handling

f59662030254e1bc4f7f135e7617e94b46385893 by manu:
fwget: Update for Radeon RX 7900 XT (RDNA3) PCI-ID



The end of the build log:

[...truncated 5.02 MB...]
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
bridge0: link state changed to DOWN
passed  [4.257s]
sys/netpfil/common/rdr:pf_basic  ->  epair0a: Ethernet address: 02:52:93:6a:75:0a
epair0b: Ethernet address: 02:52:93:6a:75:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [4.206s]
sys/netpfil/common/rdr:pf_local_redirect  ->  bridge0: Ethernet address: 58:9c:fc:10:ff:7c
epair0a: Ethernet address: 02:6f:b3:e4:b5:0a
epair0b: Ethernet address: 02:6f:b3:e4:b5:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:9d:9e:97:0d:0a
epair1b: Ethernet address: 02:9d:9e:97:0d:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
bridge0: link state changed to UP
epair0a: promiscuous mode enabled
lo0: link state changed to UP
epair1a: promiscuous mode enabled
lo0: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
bridge0: link state changed to DOWN
passed  [4.368s]
sys/netpfil/common/tos:ipfw_tos  ->  epair0a: Ethernet address: 02:03:c6:41:4f:0a
epair0b: Ethernet address: 02:03:c6:41:4f:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:70:60:5a:73:0a
epair1b: Ethernet address: 02:70:60:5a:73:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed  [8.634s]
sys/netpfil/common/tos:pf_tos  ->  epair0a: Ethernet address: 02:15:ac:bb:d9:0a
epair0b: Ethernet address: 02:15:ac:bb:d9:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:25:14:04:23:0a
epair1b: Ethernet address: 02:25:14:04:23:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed  [8.703s]
sys/netpfil/pf/altq:cbq_vlan  ->  skipped: Test requires ALTQ  [0.029s]
sys/netpfil/pf/altq:codel_bridge  ->  skipped: Test requires ALTQ  [0.026s]
sys/netpfil/pf/altq:codel_vlan  ->  skipped: Test requires ALTQ  [0.027s]
sys/netpfil/pf/altq:hfsc  ->  skipped: Test requires ALTQ  [0.024s]
sys/netpfil/pf/altq:match  ->  skipped: Test requires ALTQ  [0.026s]
sys/netpfil/pf/altq:prioritise  ->  skipped: Test requires ALTQ  [0.025s]
sys/netpfil/pf/anchor:nested_anchor  ->  epair0a: Ethernet address: 02:40:18:d2:97:0a
epair0b: Ethernet address: 02:40:18:d2:97:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.179s]
sys/netpfil/pf/anchor:nested_label  ->  passed  [0.161s]
sys/netpfil/pf/anchor:pr183198  ->  epair0a: Ethernet address: 02:b5:dd:63:69:0a
epair0b: Ethernet address: 02:b5:dd:63:69:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [0.191s]
sys/netpfil/pf/anchor:wildcard  ->  epair0a: Ethernet address: 02:64:18:65:5f:0a
epair0b: Ethernet address: 02:64:18:65:5f:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [11.222s]
sys/netpfil/pf/divert-to:ipfwoff_in_div  ->  skipped: This test is for the case when ipfw is not loaded  [0.030s]
sys/netpfil/pf/divert-to:ipfwoff_in_div_in  ->  skipped: This test is for the case when ipfw is not loaded  [0.028s]
sys/netpfil/pf/divert-to:ipfwoff_in_div_in_fwd_out_div_out  ->  skipped: This test is for the case when ipfw is not loaded  [0.029s]
sys/netpfil/pf/divert-to:ipfwoff_in_dn_in_div_in_out_div_out_dn_out  ->  skipped: This test is for the case when ipfw is not loaded  [0.031s]
sys/netpfil/pf/divert-to:ipfwoff_out_div  ->  skipped: This test is for the case when ipfw is not loaded  [0.030s]
sys/netpfil/pf/divert-to:ipfwoff_out_div_out  ->  skipped: This test is for the case when ipfw is not loaded  [0.026s]
sys/netpfil/pf/divert-to:ipfwon_in_div  ->  epair0a: Ethernet address: 02:12:8b:dc:23:0a
epair0b: Ethernet address: 02:12:8b:dc:23:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [14.302s]
sys/netpfil/pf/divert-to:ipfwon_in_div_in  ->  epair0a: Ethernet address: 02:fb:fa:c9:00:0a
epair0b: Ethernet address: 02:fb:fa:c9:00:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
*** /usr/src/contrib/kyua/utils/process/executor.cpp:822: Invariant check failed: PID 41882 already in all_exec_handles; not properly cleaned up or reused too fast
*** Fatal signal 6 received
*** Log file is /.kyua/logs/kyua.20240117-114823.log
*** Please report this problem to kyua-discuss@googlegroups.com detailing what you were doing before the crash happened; if possible, include the log file mentioned above
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
pid 809 (kyua), jid 0, uid 0: exited on signal 6 (core dumped)
Abort trap (core dumped)
+ rc=134
+ set -e
+ [ 134 -ne 0 ]
+ [ 134 -ne 1 ]
+ exit 134
+ tar cvf /dev/vtbd1 -C /meta .
a .
a ./disable-dtrace-tests.sh
a ./run.sh
a ./run-kyua.sh
a ./disable-notyet-tests.sh
a ./auto-shutdown
a ./disable-zfs-tests.sh
+ [ -f /meta/auto-shutdown ]
+ uname -p
+ shutdown -p now
Shutdown NOW!
shutdown: [pid 41911]
+ startmsg .
+ check_startmsgs
+ [ -n yes ]
+ checkyesno rc_startmsgs
+ eval '_value=$rc_startmsgs'
+ _value=YES
+ debug 'checkyesno: rc_startmsgs is set to YES.'
+ return 0
+ echo .
.
+ _return=0
+ umask 0022
+ [ 0 -ne 0 ]
+ return 0
+ _run_rc_postcmd
+ [ -n '' ]
+ return 0
+ return 0
2024-01-17T12:53:52.635748+00:00 - shutdown 41911 - - power-down by root: 

System shutdown time has arrived
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 0 done
All buffers synced.
lock order reversal:
 1st 0xfffff80003ab8930 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:2253
 2nd 0xfffff80003ab8230 fdescfs (fdescfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:3298
lock order devfs -> fdescfs attempted at:
#0 0xffffffff80bc78d3 at witness_checkorder+0xb63
#1 0xffffffff80b1f7f1 at lockmgr_lock_flags+0x181
#2 0xffffffff80c63763 at _vn_lock+0x53
#3 0xffffffff80c4ae1d at vget_finish+0x4d
#4 0xffffffff82610262 at fdesc_root+0x22
#5 0xffffffff80c4be7b at vflush+0x4b
#6 0xffffffff82610211 at fdesc_unmount+0x71
#7 0xffffffff80c40a25 at dounmount+0x7b5
#8 0xffffffff80c4d55a at vfs_unmountall+0x6a
#9 0xffffffff80c1d9bf at bufshutdown+0x31f
#10 0xffffffff80b526f3 at kern_reboot+0x703
#11 0xffffffff80b51f99 at sys_reboot+0x3a9
#12 0xffffffff81058b5c at amd64_syscall+0x85c
#13 0xffffffff8102a41b at fast_syscall_common+0xf8
pid 523 (devd), jid 0, uid 0: exited on signal 11 (no core dump - other error)
Uptime: 1h5m34s
acpi0: Powering system off
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-24683' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./run.sh
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./disable-zfs-tests.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins14623169551125031890.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'f59662030254e1bc4f7f135e7617e94b46385893', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../f59662030254e1bc4f7f135e7617e94b46385893/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address