FreeBSD-stable-14-amd64-test - Build #366 - Still Failing

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-stable-14-amd64-test - Build #367 - Still Failing"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-stable-14-amd64-test - Build #365 - Failure"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Wed, 14 Feb 2024 10:04:37 UTC
FreeBSD-stable-14-amd64-test - Build #366 (a727d8d7f50f06a83b391428b0fa8b6436f0e210) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/366/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/366/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/366/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

7d91a95f825ae79245be5c16acecae254c51d142 by dim:
Merge commit 4a39d0890894 from llvm-project (by Mark Johnston):

6d5c1c562cc58ee31022df56b853d92173e1fbc1 by dim:
Merge libcxxrt master 03c83f5a57be8c5b1a29a68de5638744f17d28ba

e4cfb5981d2bf54a9bf4c676f5177648644d7db6 by kib:
libstdthreads: destroy mutexattr in mtx_init()

a727d8d7f50f06a83b391428b0fa8b6436f0e210 by kib:
Revert "hier.7: add /lib/casper directory"



The end of the build log:

[...truncated 3.92 MiB...]
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [0.169s]
sys/netinet/output:output_raw_flowid_mpath_success  ->  epair0a: Ethernet address: 02:fd:10:0b:4b:0a
epair0b: Ethernet address: 02:fd:10:0b:4b:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:b6:38:13:35:0a
epair1b: Ethernet address: 02:b6:38:13:35:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
[fib_algo] inet.0 (bsearch4#578) rebuild_fd_flm: switching algo to radix4_lockless
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [0.460s]
sys/netinet/output:output_raw_success  ->  epair0a: Ethernet address: 02:20:04:c7:e1:0a
epair0b: Ethernet address: 02:20:04:c7:e1:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.088s]
sys/netinet/output:output_tcp_flowid_mpath_success  ->  epair0a: Ethernet address: 02:c3:f1:d2:15:0a
epair0b: Ethernet address: 02:c3:f1:d2:15:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:55:6e:68:5d:0a
epair1b: Ethernet address: 02:55:6e:68:5d:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
[fib_algo] inet.0 (bsearch4#693) rebuild_fd_flm: switching algo to radix4_lockless
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [1.575s]
sys/netinet/output:output_tcp_setup_success  ->  epair0a: Ethernet address: 02:db:d2:a5:b5:0a
epair0b: Ethernet address: 02:db:d2:a5:b5:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.165s]
sys/netinet/output:output_udp_flowid_mpath_success  ->  epair0a: Ethernet address: 02:42:6a:31:5e:0a
epair0b: Ethernet address: 02:42:6a:31:5e:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:87:f0:8a:f9:0a
epair1b: Ethernet address: 02:87:f0:8a:f9:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
[fib_algo] inet.0 (bsearch4#808) rebuild_fd_flm: switching algo to radix4_lockless
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [8.297s]
sys/netinet/output:output_udp_setup_success  ->  epair0a: Ethernet address: 02:a2:28:28:70:0a
epair0b: Ethernet address: 02:a2:28:28:70:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [1.214s]
sys/netinet/redirect:valid_redirect  ->  epair0a: Ethernet address: 02:fb:53:8d:b3:0a
epair0b: Ethernet address: 02:fb:53:8d:b3:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [0.954s]
sys/netinet/so_reuseport_lb_test:basic_ipv4  ->  passed  [0.514s]
sys/netinet/so_reuseport_lb_test:basic_ipv6  ->  Limiting closed port RST response from 30371 to 198 packets/sec
passed  [0.558s]
sys/netinet/socket_afinet:socket_afinet  ->  passed  [0.002s]
sys/netinet/socket_afinet:socket_afinet_bind_ok  ->  passed  [0.002s]
sys/netinet/socket_afinet:socket_afinet_bind_zero  ->  skipped: doesn't work when mac_portacl(4) loaded (https://bugs.freebsd.org/238781)  [0.002s]
sys/netinet/socket_afinet:socket_afinet_poll_no_rdhup  ->  passed  [0.002s]
sys/netinet/socket_afinet:socket_afinet_poll_rdhup  ->  passed  [0.002s]
sys/netinet/socket_afinet:socket_afinet_stream_reconnect  ->  passed  [0.002s]
sys/netinet/tcp_connect_port_test:basic_ipv4  ->  Limiting closed port RST response from 33589 to 204 packets/sec
Limiting closed port RST response from 33704 to 190 packets/sec
passed  [1.902s]
sys/netinet/tcp_connect_port_test:basic_ipv6  ->  Limiting closed port RST response from 21024 to 200 packets/sec
Limiting closed port RST response from 21187 to 211 packets/sec
passed  [2.919s]
sys/netinet/tcp_md5_getsockopt:tcp_md5_getsockopt_v4  ->  skipped: Test requires the tcpmd5 kernel module to be loaded  [0.002s]
sys/netinet/tcp_md5_getsockopt:tcp_md5_getsockopt_v6  ->  skipped: Test requires the tcpmd5 kernel module to be loaded  [0.002s]
sys/netinet/libalias/1_instance:1_singleinit  ->  passed  [0.004s]
sys/netinet/libalias/1_instance:2_destroynull  ->  pid 15719 (1_instance), jid 0, uid 0: exited on signal 11 (core dumped)
expected_failure: Code expects valid pointer.  [0.013s]
sys/netinet/libalias/1_instance:3_multiinit  ->  passed  [0.008s]
sys/netinet/libalias/1_instance:4_multiinstance  ->  passed  [0.059s]
sys/netinet/libalias/2_natout:1_simplemasq  ->  passed  [0.003s]
sys/netinet/libalias/2_natout:2_unregistered  ->  passed  [0.003s]
sys/netinet/libalias/2_natout:3_cgn  ->  passed  [0.003s]
sys/netinet/libalias/2_natout:4_udp  ->  passed  [0.003s]
sys/netinet/libalias/2_natout:5_sameport  ->  passed  [0.003s]
sys/netinet/libalias/2_natout:6_cleartable  ->  passed  [0.003s]
sys/netinet/libalias/2_natout:7_stress  ->  passed  [0.071s]
sys/netinet/libalias/2_natout:8_portrange  ->  passed  [0.003s]
sys/netinet/libalias/3_natin:1_portforward  ->  passed  [0.003s]
sys/netinet/libalias/3_natin:2_portoverlap  ->  passed  [0.003s]
sys/netinet/libalias/3_natin:3_redirectany  ->  passed  [0.003s]
sys/netinet/libalias/3_natin:4_redirectaddr  ->  passed  [0.003s]
sys/netinet/libalias/3_natin:5_lsnat  ->  passed  [0.003s]
sys/netinet/libalias/3_natin:6_oneshot  ->  passed  [0.003s]
sys/netinet6/divert:ipdivert_ip6_output_remote_success  ->  epair0a: Ethernet address: 02:23:36:12:c5:0a
epair0b: Ethernet address: 02:23:36:12:c5:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.932s]
sys/netinet6/exthdr:exthdr  ->  epair0a: Ethernet address: 02:14:46:a1:d1:0a
epair0b: Ethernet address: 02:14:46:a1:d1:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [100.532s]
sys/netinet6/fibs6:fibs6_ifroutes1_success  ->  epair0a: Ethernet address: 02:bd:60:ba:8c:0a
epair0b: Ethernet address: 02:bd:60:ba:8c:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
WARNING: Adding ifaddrs to all fibs has been turned off by default. Consider tuning net.add_addr_allfibs if needed
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [1.338s]
sys/netinet6/forward6:fwd_ip6_gu_icmp_gw_gu_fast_success  ->  epair0a: Ethernet address: 02:e0:ce:31:e3:0a
epair0b: Ethernet address: 02:e0:ce:31:e3:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.385s]
sys/netinet6/forward6:fwd_ip6_gu_icmp_gw_gu_slow_success  ->  epair0a: Ethernet address: 02:6c:b0:7d:42:0a
epair0b: Ethernet address: 02:6c:b0:7d:42:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [6.978s]
sys/netinet6/forward6:fwd_ip6_gu_icmp_gw_ll_fast_success  ->  epair0a: Ethernet address: 02:a7:e2:62:aa:0a
epair0b: Ethernet address: 02:a7:e2:62:aa:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.160s]
sys/netinet6/forward6:fwd_ip6_gu_icmp_gw_ll_slow_success  ->  epair0a: Ethernet address: 02:b6:59:81:0a:0a
epair0b: Ethernet address: 02:b6:59:81:0a:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.690s]
sys/netinet6/forward6:fwd_ip6_gu_icmp_iface_fast_success  ->  epair0a: Ethernet address: 02:82:2a:17:ed:0a
epair0b: Ethernet address: 02:82:2a:17:ed:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
vm_run error -1, errno 6
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-14-amd64-366' --destroy
vm_open: testvm-14-amd64-366 could not be opened: No such file or directory
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./run.sh
x ./disable-zfs-tests.sh
x ./disable-dtrace-tests.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-14-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-14-amd64-test] $ /bin/sh -xe /tmp/jenkins12122588487621919368.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-14-amd64-test', 'commit': 'a727d8d7f50f06a83b391428b0fa8b6436f0e210', 'branch': 'stable-14', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-14/latest_tested/amd64/amd64 -> ../../a727d8d7f50f06a83b391428b0fa8b6436f0e210/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address