FreeBSD-stable-14-amd64-test - Build #26 - Still Failing

Reply: jenkins-admin_a_FreeBSD.org: "FreeBSD-stable-14-amd64-test - Build #27 - Still unstable"
In reply to: jenkins-admin_a_FreeBSD.org: "FreeBSD-stable-14-amd64-test - Build #25 - Failure"
Go to: [ bottom of page ] [ top of archives ] [ this month ]
From: <jenkins-admin_at_FreeBSD.org>
Date: Wed, 13 Sep 2023 11:06:05 UTC
FreeBSD-stable-14-amd64-test - Build #26 (c265e6217951b8bf71dbf59832e06d9f2c0b0325) - Still Failing

Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/26/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/26/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/26/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

c265e6217951b8bf71dbf59832e06d9f2c0b0325 by markj:
qat: Intel 4xxx Series driver API extension



The end of the build log:

[...truncated 4.14 MB...]
passed  [0.088s]
sys/netinet/output:output_tcp_flowid_mpath_success  ->  epair0a: Ethernet address: 02:c0:e4:87:ed:0a
epair0b: Ethernet address: 02:c0:e4:87:ed:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:42:70:1c:13:0a
epair1b: Ethernet address: 02:42:70:1c:13:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
[fib_algo] inet.0 (bsearch4#693) rebuild_fd_flm: switching algo to radix4_lockless
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [1.625s]
sys/netinet/output:output_tcp_setup_success  ->  epair0a: Ethernet address: 02:a0:91:1f:89:0a
epair0b: Ethernet address: 02:a0:91:1f:89:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.154s]
sys/netinet/output:output_udp_flowid_mpath_success  ->  epair0a: Ethernet address: 02:ee:56:94:a1:0a
epair0b: Ethernet address: 02:ee:56:94:a1:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:35:2c:96:c5:0a
epair1b: Ethernet address: 02:35:2c:96:c5:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
lo2: link state changed to UP
[fib_algo] inet.0 (bsearch4#808) rebuild_fd_flm: switching algo to radix4_lockless
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [8.207s]
sys/netinet/output:output_udp_setup_success  ->  epair0a: Ethernet address: 02:01:0a:99:66:0a
epair0b: Ethernet address: 02:01:0a:99:66:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [1.245s]
sys/netinet/redirect:valid_redirect  ->  epair0a: Ethernet address: 02:a8:7c:9a:74:0a
epair0b: Ethernet address: 02:a8:7c:9a:74:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [0.963s]
sys/netinet/so_reuseport_lb_test:basic_ipv4  ->  passed  [0.507s]
sys/netinet/so_reuseport_lb_test:basic_ipv6  ->  Limiting closed port RST response from 30035 to 216 packets/sec
passed  [0.630s]
sys/netinet/socket_afinet:socket_afinet  ->  passed  [0.003s]
sys/netinet/socket_afinet:socket_afinet_bind_ok  ->  passed  [0.003s]
sys/netinet/socket_afinet:socket_afinet_bind_zero  ->  skipped: doesn't work when mac_portacl(4) loaded (https://bugs.freebsd.org/238781)  [0.003s]
sys/netinet/socket_afinet:socket_afinet_poll_no_rdhup  ->  passed  [0.003s]
sys/netinet/socket_afinet:socket_afinet_poll_rdhup  ->  passed  [0.003s]
sys/netinet/socket_afinet:socket_afinet_stream_reconnect  ->  passed  [0.003s]
sys/netinet/tcp_connect_port_test:basic_ipv4  ->  Limiting closed port RST response from 31393 to 187 packets/sec
Limiting closed port RST response from 29088 to 205 packets/sec
passed  [2.151s]
sys/netinet/tcp_connect_port_test:basic_ipv6  ->  Limiting closed port RST response from 21355 to 206 packets/sec
Limiting closed port RST response from 21079 to 212 packets/sec
Limiting closed port RST response from 20357 to 209 packets/sec
passed  [3.145s]
sys/netinet/tcp_md5_getsockopt:tcp_md5_getsockopt_v4  ->  skipped: Test requires the tcpmd5 kernel module to be loaded  [0.003s]
sys/netinet/tcp_md5_getsockopt:tcp_md5_getsockopt_v6  ->  skipped: Test requires the tcpmd5 kernel module to be loaded  [0.003s]
sys/netinet/libalias/1_instance:1_singleinit  ->  passed  [0.011s]
sys/netinet/libalias/1_instance:2_destroynull  ->  pid 41449 (1_instance), jid 0, uid 0: exited on signal 11 (core dumped)
expected_failure: Code expects valid pointer.  [0.011s]
sys/netinet/libalias/1_instance:3_multiinit  ->  passed  [0.009s]
sys/netinet/libalias/1_instance:4_multiinstance  ->  passed  [0.059s]
sys/netinet/libalias/2_natout:1_simplemasq  ->  passed  [0.003s]
sys/netinet/libalias/2_natout:2_unregistered  ->  passed  [0.003s]
sys/netinet/libalias/2_natout:3_cgn  ->  passed  [0.003s]
sys/netinet/libalias/2_natout:4_udp  ->  passed  [0.003s]
sys/netinet/libalias/2_natout:5_sameport  ->  passed  [0.003s]
sys/netinet/libalias/2_natout:6_cleartable  ->  passed  [0.003s]
sys/netinet/libalias/2_natout:7_stress  ->  passed  [0.068s]
sys/netinet/libalias/2_natout:8_portrange  ->  passed  [0.003s]
sys/netinet/libalias/3_natin:1_portforward  ->  passed  [0.003s]
sys/netinet/libalias/3_natin:2_portoverlap  ->  passed  [0.003s]
sys/netinet/libalias/3_natin:3_redirectany  ->  passed  [0.003s]
sys/netinet/libalias/3_natin:4_redirectaddr  ->  passed  [0.003s]
sys/netinet/libalias/3_natin:5_lsnat  ->  passed  [0.003s]
sys/netinet/libalias/3_natin:6_oneshot  ->  passed  [0.003s]
sys/netinet6/divert:ipdivert_ip6_output_remote_success  ->  epair0a: Ethernet address: 02:dc:d1:f6:74:0a
epair0b: Ethernet address: 02:dc:d1:f6:74:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [2.901s]
sys/netinet6/exthdr:exthdr  ->  epair0a: Ethernet address: 02:d4:75:67:9b:0a
epair0b: Ethernet address: 02:d4:75:67:9b:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [4.219s]
sys/netinet6/fibs6:fibs6_ifroutes1_success  ->  epair0a: Ethernet address: 02:91:77:31:1b:0a
epair0b: Ethernet address: 02:91:77:31:1b:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
WARNING: Adding ifaddrs to all fibs has been turned off by default. Consider tuning net.add_addr_allfibs if needed
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [1.636s]
sys/netinet6/forward6:fwd_ip6_gu_icmp_gw_gu_fast_success  ->  epair0a: Ethernet address: 02:22:24:18:3b:0a
epair0b: Ethernet address: 02:22:24:18:3b:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [2.468s]
sys/netinet6/forward6:fwd_ip6_gu_icmp_gw_gu_slow_success  ->  epair0a: Ethernet address: 02:62:31:e1:2c:0a
epair0b: Ethernet address: 02:62:31:e1:2c:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [2.235s]
sys/netinet6/forward6:fwd_ip6_gu_icmp_gw_ll_fast_success  ->  epair0a: Ethernet address: 02:e3:bf:a2:9b:0a
epair0b: Ethernet address: 02:e3:bf:a2:9b:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [4.020s]
sys/netinet6/forward6:fwd_ip6_gu_icmp_gw_ll_slow_success  ->  epair0a: Ethernet address: 02:b5:f4:a2:a9:0a
epair0b: Ethernet address: 02:b5:f4:a2:a9:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [5.348s]
sys/netinet6/forward6:fwd_ip6_gu_icmp_iface_fast_success  ->  epair0a: Ethernet address: 02:43:66:c2:6d:0a
epair0b: Ethernet address: 02:43:66:c2:6d:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [2.714s]
sys/netinet6/forward6:fwd_ip6_gu_icmp_iface_slow_success  ->  epair0a: Ethernet address: 02:91:b9:2d:37:0a
epair0b: Ethernet address: 02:91:b9:2d:37:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: atf-check failed; see the output of the test for details  [2.645s]
sys/netinet6/lpm6:lpm6_test1_success  ->  epair0a: Ethernet address: 02:d8:dc:61:6a:0a
epair0b: Ethernet address: 02:d8:dc:61:6a:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:ac:83:61:9d:0a
epair1b: Ethernet address: 02:ac:83:61:9d:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [2.202s]
sys/netinet6/lpm6:lpm6_test2_success  ->  epair0a: Ethernet address: 02:9c:32:9c:de:0a
epair0b: Ethernet address: 02:9c:32:9c:de:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:b1:3a:b4:d2:0a
epair1b: Ethernet address: 02:b1:3a:b4:d2:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
lo1: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [2.058s]
sys/netinet6/mld:mldraw01  ->  epair0a: Ethernet address: 02:9d:69:79:28:0a
epair0b: Ethernet address: 02:9d:69:79:28:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
vm_run error -1, errno 6
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-14-amd64-26' --destroy
vm_open: testvm-14-amd64-26 could not be opened: No such file or directory
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./run.sh
x ./disable-notyet-tests.sh
x ./disable-zfs-tests.sh
x ./auto-shutdown
x ./run-kyua.sh
+ rm -f 'test-report.*'
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-14-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-14-amd64-test] $ /bin/sh -xe /tmp/jenkins5139775261822829441.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-14-amd64-test', 'commit': 'c265e6217951b8bf71dbf59832e06d9f2c0b0325', 'branch': 'stable-14', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-14/latest_tested/amd64/amd64 -> ../../c265e6217951b8bf71dbf59832e06d9f2c0b0325/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address