FreeBSD-main-amd64-test - Build #24326 - Failure
Date: Fri, 03 Nov 2023 12:56:40 UTC
FreeBSD-main-amd64-test - Build #24326 (188fe88ec50eac7c10e1d8350bf1180f8c16e463) - Failure
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/24326/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/24326/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/24326/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
df6e7e11c5f660cbd5381819718e3c947325fa2e by bapt:
pkgbase: set a default set of kernel for when PACKAGE_BUILDING=1
188fe88ec50eac7c10e1d8350bf1180f8c16e463 by bapt:
pkgbase: force OSVERSION
The end of the build log:
[...truncated 4.99 MB...]
epair3a: link state changed to UP
epair3b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair2b: link state changed to DOWN
epair2a: link state changed to DOWN
epair3b: link state changed to DOWN
epair3a: link state changed to DOWN
passed [2.496s]
sys/netpfil/pf/route_to:v4 -> epair0a: Ethernet address: 02:05:e8:48:4a:0a
epair0b: Ethernet address: 02:05:e8:48:4a:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:3a:39:d1:b6:0a
epair1b: Ethernet address: 02:3a:39:d1:b6:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed [3.271s]
sys/netpfil/pf/route_to:v6 -> epair0a: Ethernet address: 02:31:27:13:c5:0a
epair0b: Ethernet address: 02:31:27:13:c5:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:9a:91:3e:e0:0a
epair1b: Ethernet address: 02:9a:91:3e:e0:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed [3.204s]
sys/netpfil/pf/rtable:forward_v4 -> epair0a: Ethernet address: 02:9d:bf:d9:b7:0a
epair0b: Ethernet address: 02:9d:bf:d9:b7:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:f1:ed:b8:a3:0a
epair1b: Ethernet address: 02:f1:ed:b8:a3:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
WARNING: Adding ifaddrs to all fibs has been turned off by default. Consider tuning net.add_addr_allfibs if needed
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [13.803s]
sys/netpfil/pf/rtable:forward_v6 -> epair0a: Ethernet address: 02:6b:5c:87:c6:0a
epair0b: Ethernet address: 02:6b:5c:87:c6:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:d2:59:65:9e:0a
epair1b: Ethernet address: 02:d2:59:65:9e:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
WARNING: Adding ifaddrs to all fibs has been turned off by default. Consider tuning net.add_addr_allfibs if needed
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [13.547s]
sys/netpfil/pf/rules_counter:get_clear -> epair0a: Ethernet address: 02:08:d5:87:03:0a
epair0b: Ethernet address: 02:08:d5:87:03:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [2.237s]
sys/netpfil/pf/rules_counter:keepcounters -> epair0a: Ethernet address: 02:15:64:6e:6a:0a
epair0b: Ethernet address: 02:15:64:6e:6a:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [6.447s]
sys/netpfil/pf/scrub_compat:max_mss_v4 -> epair0a: Ethernet address: 02:4e:c2:b6:d9:0a
epair0b: Ethernet address: 02:4e:c2:b6:d9:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:2f:d6:82:60:0a
epair1b: Ethernet address: 02:2f:d6:82:60:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [2.880s]
sys/netpfil/pf/scrub_compat:max_mss_v6 -> *** /usr/src/contrib/kyua/utils/process/executor.cpp:779: Invariant check failed: PID 7545 already in all_exec_handles; not properly cleaned up or reused too fast
*** Fatal signal 6 received
*** Log file is /.kyua/logs/kyua.20231103-114243.log
*** Please report this problem to kyua-discuss@googlegroups.com detailing what you were doing before the crash happened; if possible, include the log file mentioned above
epair0a: Ethernet address: 02:22:c2:93:8f:0a
epair0b: Ethernet address: 02:22:c2:93:8f:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:e5:c0:b3:95:0a
epair1b: Ethernet address: 02:e5:c0:b3:95:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
pid 758 (kyua), jid 0, uid 0: exited on signal 6 (core dumped)
Abort trap (core dumped)
+ rc=134
+ set -e
+ [ 134 -ne 0 ]
+ [ 134 -ne 1 ]
+ exit 134
+ tar cvf /dev/vtbd1 -C /meta .
a .
a ./run-kyua.sh
a ./auto-shutdown
a ./disable-zfs-tests.sh
a ./disable-notyet-tests.sh
a ./run.sh
a ./disable-dtrace-tests.sh
+ [ -f /meta/auto-shutdown ]
+ uname -p
+ shutdown -p now
Shutdown NOW!
shutdown: [pid 7703]
+ startmsg .
+ check_startmsgs
+ [ -n yes ]
+ checkyesno rc_startmsgs
+ eval '_value=$rc_startmsgs'
+ _value=YES
+ debug 'checkyesno: rc_startmsgs is set to YES.'
+ return 0
+ echo .
.
+ _return=0
+ umask 0022
+ [ 0 -ne 0 ]
+ return 0
+ _run_rc_postcmd
+ [ -n '' ]
+ return 0
+ return 0
2023-11-03T12:56:28.674017+00:00 - shutdown 7703 - - power-down by root:
System shutdown time has arrived
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 2 1 epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
2 epair1b: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1b: promiscuous mode disabled
2 0 0 done
All buffers synced.
lock order reversal:
1st 0xfffff800099e2e70 devfs (devfs, lockmgr) @ /usr/src/sys/kern/vfs_mount.c:2255
2nd 0xfffff800099e2770 fdescfs (fdescfs, lockmgr) @ /usr/src/sys/kern/vfs_subr.c:3296
lock order devfs -> fdescfs attempted at:
#0 0xffffffff80bc337e at witness_checkorder+0xbbe
#1 0xffffffff80b1cd21 at lockmgr_lock_flags+0x181
#2 0xffffffff80c5f153 at _vn_lock+0x53
#3 0xffffffff80c4673d at vget_finish+0x4d
#4 0xffffffff82610262 at fdesc_root+0x22
#5 0xffffffff80c477db at vflush+0x4b
#6 0xffffffff82610211 at fdesc_unmount+0x71
#7 0xffffffff80c3c425 at dounmount+0x7b5
#8 0xffffffff80c48f1a at vfs_unmountall+0x6a
#9 0xffffffff80c1945c at bufshutdown+0x30c
#10 0xffffffff80b4fb83 at kern_reboot+0x703
#11 0xffffffff80b4f429 at sys_reboot+0x3a9
#12 0xffffffff81051dab at amd64_syscall+0x84b
#13 0xffffffff810237db at fast_syscall_common+0xf8
pid 472 (devd), jid 0, uid 0: exited on signal 11 (no core dump - other error)
Uptime: 1h13m52s
Khelp module "ertt" can't unload until its refcount drops from 2 to 0.
acpi0: Powering system off
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-24326' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run-kyua.sh
x ./auto-shutdown
x ./disable-zfs-tests.sh
x ./disable-notyet-tests.sh
x ./run.sh
x ./disable-dtrace-tests.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins2363125559983794261.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '188fe88ec50eac7c10e1d8350bf1180f8c16e463', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../188fe88ec50eac7c10e1d8350bf1180f8c16e463/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address