FreeBSD-main-amd64-test - Build #24551 - Failure

From: <jenkins-admin_at_FreeBSD.org>
Date: Wed, 20 Dec 2023 14:54:31 UTC
FreeBSD-main-amd64-test - Build #24551 (fa826f64e1b7167dde2c3cb8cfc4df0d3e503542) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/24551/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/24551/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/24551/console

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

a4a9d2a64a4ded0adf27cbc1af82669112c41887 by yuripv:
locale: regenerate SJIS charmap from CLDR

7d413ee805224ff5e93e9ef117207f19b70d0522 by yuripv:
Revert "locale: regenerate SJIS charmap from CLDR"

fa826f64e1b7167dde2c3cb8cfc4df0d3e503542 by gbe:
rtnetlink.4: Fix a typo in the manual pag



The end of the build log:

[...truncated 3.89 MB...]
epair8b: link state changed to UP
broken: Test case body timed out  [300.005s]
sys/netinet/fibs_test:arpresolve_checks_interface_fib  ->  skipped: firewalls interfere with this test  [0.034s]
sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet  ->  tap0: Ethernet address: 58:9c:fc:10:b3:13
tap1: Ethernet address: 58:9c:fc:10:ff:a5
passed  [0.053s]
sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet_inet6  ->  tap0: Ethernet address: 58:9c:fc:10:b3:13
tap1: Ethernet address: 58:9c:fc:10:ff:a5
passed  [0.053s]
sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib  ->  tap0: Ethernet address: 58:9c:fc:10:b3:13
passed  [0.040s]
sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib_inet6  ->  tap0: Ethernet address: 58:9c:fc:10:b3:13
passed  [0.049s]
sys/netinet/fibs_test:same_ip_multiple_ifaces  ->  tap0: Ethernet address: 58:9c:fc:10:b3:13
tap1: Ethernet address: 58:9c:fc:10:ff:a5
tap2: Ethernet address: 58:9c:fc:00:40:13
tap3: Ethernet address: 58:9c:fc:10:61:7e
expected_failure: kern/189088 Assigning the same IP to multiple interfaces in different FIBs creates a host route for only one: atf-check failed; see the output of the test for details  [0.062s]
sys/netinet/fibs_test:same_ip_multiple_ifaces_fib0  ->  tap0: Ethernet address: 58:9c:fc:10:b3:13
tap1: Ethernet address: 58:9c:fc:10:ff:a5
tap2: Ethernet address: 58:9c:fc:00:40:13
tap3: Ethernet address: 58:9c:fc:10:61:7e
passed  [0.043s]
sys/netinet/fibs_test:same_ip_multiple_ifaces_inet6  ->  tap0: Ethernet address: 58:9c:fc:10:b3:13
tap1: Ethernet address: 58:9c:fc:10:ff:a5
tap0: Ethernet address: 58:9c:fc:10:b3:13
tap1: Ethernet address: 58:9c:fc:10:ff:a5
passed  [0.097s]
sys/netinet/fibs_test:slaac_on_nondefault_fib6  ->  skipped: firewalls interfere with this test  [0.036s]
sys/netinet/fibs_test:subnet_route_with_multiple_fibs_on_same_subnet  ->  tap0: Ethernet address: 58:9c:fc:10:b3:13
tap1: Ethernet address: 58:9c:fc:10:ff:a5
passed  [0.056s]
sys/netinet/fibs_test:subnet_route_with_multiple_fibs_on_same_subnet_inet6  ->  tap0: Ethernet address: 58:9c:fc:10:b3:13
tap1: Ethernet address: 58:9c:fc:10:ff:a5
passed  [0.048s]
sys/netinet/fibs_test:udp_dontroute  ->  tap0: Ethernet address: 58:9c:fc:10:b3:13
tap1: Ethernet address: 58:9c:fc:10:ff:a5
tap0: link state changed to UP
tap0: link state changed to DOWN
tap0: Ethernet address: 58:9c:fc:10:b3:13
tap1: Ethernet address: 58:9c:fc:10:ff:a5
tap1: link state changed to UP
tap1: link state changed to DOWN
passed  [0.092s]
sys/netinet/fibs_test:udp_dontroute6  ->  skipped: https://bugs.freebsd.org/244172  [0.025s]
sys/netinet/forward:fwd_ip_icmp_gw_fast_success  ->  epair9a: Ethernet address: 02:d7:1a:59:a2:0a
epair9b: Ethernet address: 02:d7:1a:59:a2:0b
epair9a: link state changed to UP
epair9b: link state changed to UP
broken: Test case body timed out  [300.009s]
sys/netinet/forward:fwd_ip_icmp_gw_slow_success  ->  epair10a: Ethernet address: 02:9c:88:15:fd:0a
epair10b: Ethernet address: 02:9c:88:15:fd:0b
epair10a: link state changed to UP
epair10b: link state changed to UP
broken: Test case body timed out  [300.004s]
sys/netinet/forward:fwd_ip_icmp_iface_fast_success  ->  epair11a: Ethernet address: 02:47:58:11:9d:0a
epair11b: Ethernet address: 02:47:58:11:9d:0b
epair11a: link state changed to UP
epair11b: link state changed to UP
broken: Test case body timed out  [300.005s]
sys/netinet/forward:fwd_ip_icmp_iface_slow_success  ->  epair12a: Ethernet address: 02:b4:16:f8:e7:0a
epair12b: Ethernet address: 02:b4:16:f8:e7:0b
epair12a: link state changed to UP
epair12b: link state changed to UP
broken: Test case body timed out  [300.005s]
sys/netinet/igmp.py:__test_cases_list__  ->  broken: Test case list timed out  [0.003s]
sys/netinet/ip6_v4mapped_test:tcp_v4mapped_bind  ->  passed  [0.005s]
sys/netinet/ip6_v4mapped_test:udp_v4mapped_sendto  ->  passed  [0.004s]
sys/netinet/ip_reass_test:ip_reass__large_fragment  ->  passed  [0.016s]
sys/netinet/ip_reass_test:ip_reass__multiple_last_fragments  ->  passed  [0.033s]
sys/netinet/ip_reass_test:ip_reass__zero_length_fragment  ->  passed  [0.017s]
sys/netinet/lpm:lpm_test1_success  ->  epair13a: Ethernet address: 02:d2:1e:02:e1:0a
epair13b: Ethernet address: 02:d2:1e:02:e1:0b
epair13a: link state changed to UP
epair13b: link state changed to UP
epair14a: Ethernet address: 02:93:67:b8:82:0a
epair14b: Ethernet address: 02:93:67:b8:82:0b
epair14a: link state changed to UP
epair14b: link state changed to UP
broken: Test case body timed out  [300.002s]
sys/netinet/lpm:lpm_test2_success  ->  epair15a: Ethernet address: 02:c0:ed:62:71:0a
epair15b: Ethernet address: 02:c0:ed:62:71:0b
epair15a: link state changed to UP
epair15b: link state changed to UP
epair16a: Ethernet address: 02:2b:ee:93:5f:0a
epair16b: Ethernet address: 02:2b:ee:93:5f:0b
epair16a: link state changed to UP
epair16b: link state changed to UP
broken: Test case body timed out  [300.005s]
sys/netinet/output:output_raw_flowid_mpath_success  ->  epair17a: Ethernet address: 02:17:b5:a6:3a:0a
epair17b: Ethernet address: 02:17:b5:a6:3a:0b
epair17a: link state changed to UP
epair17b: link state changed to UP
epair18a: Ethernet address: 02:e1:c6:1f:95:0a
epair18b: Ethernet address: 02:e1:c6:1f:95:0b
epair18a: link state changed to UP
epair18b: link state changed to UP
broken: Test case body timed out  [300.010s]
sys/netinet/output:output_raw_success  ->  epair19a: Ethernet address: 02:ef:b1:e1:e8:0a
epair19b: Ethernet address: 02:ef:b1:e1:e8:0b
epair19a: link state changed to UP
epair19b: link state changed to UP
broken: Test case body timed out  [300.005s]
sys/netinet/output:output_tcp_flowid_mpath_success  ->  epair20a: Ethernet address: 02:14:2b:30:9c:0a
epair20b: Ethernet address: 02:14:2b:30:9c:0b
epair20a: link state changed to UP
epair20b: link state changed to UP
epair21a: Ethernet address: 02:20:b6:97:04:0a
epair21b: Ethernet address: 02:20:b6:97:04:0b
epair21a: link state changed to UP
epair21b: link state changed to UP
broken: Test case body timed out  [300.006s]
sys/netinet/output:output_tcp_setup_success  ->  epair22a: Ethernet address: 02:8a:d4:76:7f:0a
epair22b: Ethernet address: 02:8a:d4:76:7f:0b
epair22a: link state changed to UP
epair22b: link state changed to UP
broken: Test case body timed out  [300.002s]
sys/netinet/output:output_udp_flowid_mpath_success  ->  epair23a: Ethernet address: 02:b2:40:bb:7d:0a
epair23b: Ethernet address: 02:b2:40:bb:7d:0b
epair23a: link state changed to UP
epair23b: link state changed to UP
epair24a: Ethernet address: 02:1c:90:7a:cf:0a
epair24b: Ethernet address: 02:1c:90:7a:cf:0b
epair24a: link state changed to UP
epair24b: link state changed to UP
broken: Test case body timed out  [300.004s]
sys/netinet/output:output_udp_setup_success  ->  epair25a: Ethernet address: 02:77:47:7f:fb:0a
epair25b: Ethernet address: 02:77:47:7f:fb:0b
epair25a: link state changed to UP
epair25b: link state changed to UP
broken: Test case body timed out  [300.006s]
sys/netinet/redirect:valid_redirect  ->  epair26a: Ethernet address: 02:22:29:f4:48:0a
epair26b: Ethernet address: 02:22:29:f4:48:0b
epair26a: link state changed to UP
epair26b: link state changed to UP
broken: Test case body timed out  [300.005s]
sys/netinet/so_reuseport_lb_test:basic_ipv4  ->  Limiting closed port RST response from 12437 to 192 packets/sec
passed  [1.301s]
sys/netinet/so_reuseport_lb_test:basic_ipv6  ->  Limiting closed port RST response from 11918 to 213 packets/sec
passed  [1.316s]
sys/netinet/socket_afinet:socket_afinet  ->  passed  [0.004s]
sys/netinet/socket_afinet:socket_afinet_bind_ok  ->  passed  [0.004s]
sys/netinet/socket_afinet:socket_afinet_bind_zero  ->  skipped: doesn't work when mac_portacl(4) loaded (https://bugs.freebsd.org/238781)  [0.004s]
sys/netinet/socket_afinet:socket_afinet_poll_no_rdhup  ->  passed  [0.004s]
sys/netinet/socket_afinet:socket_afinet_poll_rdhup  ->  passed  [0.004s]
sys/netinet/socket_afinet:socket_afinet_stream_reconnect  ->  passed  [0.004s]
sys/netinet/tcp_connect_port_test:basic_ipv4  ->  Limiting closed port RST response from 12112 to 184 packets/sec
Limiting closed port RST response from 16268 to 202 packets/sec
Limiting closed port RST response from 17490 to 213 packets/sec
Limiting closed port RST response from 12983 to 196 packets/sec
Limiting closed port RST response from 13027 to 199 packets/sec
passed  [4.324s]
sys/netinet/tcp_connect_port_test:basic_ipv6  ->  Limiting closed port RST response from 13796 to 211 packets/sec
Limiting closed port RST response from 12379 to 194 packets/sec
Limiting closed port RST response from 12400 to 191 packets/sec
Limiting closed port RST response from 12310 to 190 packets/sec
Limiting closed port RST response from 12272 to 196 packets/sec
passed  [5.145s]
sys/netinet/tcp_md5_getsockopt:tcp_md5_getsockopt_v4  ->  skipped: Test requires the tcpmd5 kernel module to be loaded  [0.004s]
sys/netinet/tcp_md5_getsockopt:tcp_md5_getsockopt_v6  ->  skipped: Test requires the tcpmd5 kernel module to be loaded  [0.004s]
sys/netinet/libalias/1_instance:1_singleinit  ->  passed  [0.007s]
sys/netinet/libalias/1_instance:2_destroynull  ->  pid 20013 (1_instance), jid 0, uid 0: exited on signal 11 (core dumped)
expected_failure: Code expects valid pointer.  [0.017s]
sys/netinet/libalias/1_instance:3_multiinit  ->  passed  [0.013s]
sys/netinet/libalias/1_instance:4_multiinstance  ->  passed  [0.087s]
sys/netinet/libalias/2_natout:1_simplemasq  ->  passed  [0.004s]
sys/netinet/libalias/2_natout:2_unregistered  ->  passed  [0.004s]
sys/netinet/libalias/2_natout:3_cgn  ->  passed  [0.004s]
sys/netinet/libalias/2_natout:4_udp  ->  passed  [0.005s]
sys/netinet/libalias/2_natout:5_sameport  ->  passed  [0.004s]
sys/netinet/libalias/2_natout:6_cleartable  ->  passed  [0.004s]
sys/netinet/libalias/2_natout:7_stress  ->  passed  [0.089s]
sys/netinet/libalias/2_natout:8_portrange  ->  passed  [0.004s]
sys/netinet/libalias/3_natin:1_portforward  ->  passed  [0.004s]
sys/netinet/libalias/3_natin:2_portoverlap  ->  passed  [0.004s]
sys/netinet/libalias/3_natin:3_redirectany  ->  passed  [0.004s]
sys/netinet/libalias/3_natin:4_redirectaddr  ->  passed  [0.004s]
sys/netinet/libalias/3_natin:5_lsnat  ->  passed  [0.004s]
sys/netinet/libalias/3_natin:6_oneshot  ->  passed  [0.004s]
sys/netinet6/divert:ipdivert_ip6_output_remote_success  ->  epair27a: Ethernet address: 02:a0:3b:af:21:0a
epair27b: Ethernet address: 02:a0:3b:af:21:0b
epair27a: link state changed to UP
epair27b: link state changed to UP
broken: Test case body timed out  [300.011s]
sys/netinet6/exthdr:exthdr  ->  epair28a: Ethernet address: 02:7d:60:69:6f:0a
epair28b: Ethernet address: 02:7d:60:69:6f:0b
epair28a: link state changed to UP
epair28b: link state changed to UP
broken: Test case body timed out  [300.004s]
sys/netinet6/fibs6:fibs6_ifroutes1_success  ->  epair29a: Ethernet address: 02:8b:94:7d:3c:0a
epair29b: Ethernet address: 02:8b:94:7d:3c:0b
epair29a: link state changed to UP
epair29b: link state changed to UP
broken: Test case body timed out  [300.010s]
sys/netinet6/forward6:fwd_ip6_gu_icmp_gw_gu_fast_success  ->  epair30a: Ethernet address: 02:63:3e:8b:c8:0a
epair30b: Ethernet address: 02:63:3e:8b:c8:0b
epair30a: link state changed to UP
epair30b: link state changed to UP
broken: Test case body timed out  [300.006s]
sys/netinet6/forward6:fwd_ip6_gu_icmp_gw_gu_slow_success  ->  epair31a: Ethernet address: 02:1e:17:44:2c:0a
epair31b: Ethernet address: 02:1e:17:44:2c:0b
epair31a: link state changed to UP
epair31b: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... 
Syncing disks, vnodes remaining... 0 0 done
All buffers synced.
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-24551' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./run-kyua.sh
x ./disable-notyet-tests.sh
x ./auto-shutdown
x ./disable-zfs-tests.sh
x ./run.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins2057905866912170402.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'fa826f64e1b7167dde2c3cb8cfc4df0d3e503542', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../fa826f64e1b7167dde2c3cb8cfc4df0d3e503542/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address