FreeBSD-stable-14-amd64-test - Build #240 - Failure
Date: Sun, 10 Dec 2023 06:48:47 UTC
FreeBSD-stable-14-amd64-test - Build #240 (1ed12844a18610451ffc93155d825e5cfcfd9747) - Failure
Build information: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/240/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/240/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-stable-14-amd64-test/240/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
1ed12844a18610451ffc93155d825e5cfcfd9747 by khng:
termcap.small: Include xterm-256color
The end of the build log:
[...truncated 4.40 MB...]
epair1b: link state changed to DOWN
passed [0.123s]
sys/net/if_bridge_test:span -> epair0a: Ethernet address: 02:4b:07:bb:86:0a
epair0b: Ethernet address: 02:4b:07:bb:86:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:5f:73:c2:32:0a
epair1b: Ethernet address: 02:5f:73:c2:32:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
bridge0: Ethernet address: 58:9c:fc:10:ff:c7
bridge0: link state changed to UP
epair0a: promiscuous mode enabled
epair1b: promiscuous mode enabled
epair0b: promiscuous mode enabled
epair0b: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair1b: promiscuous mode enabled
epair0b: promiscuous mode enabled
epair0b: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0a: promiscuous mode disabled
bridge0: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [5.916s]
sys/net/if_bridge_test:static -> epair0a: Ethernet address: 02:b7:98:83:9d:0a
epair0b: Ethernet address: 02:b7:98:83:9d:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
bridge0: Ethernet address: 58:9c:fc:10:ff:c7
bridge0: link state changed to UP
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
bridge0: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [0.138s]
sys/net/if_bridge_test:stp -> epair0a: Ethernet address: 02:e1:c8:df:12:0a
epair0b: Ethernet address: 02:e1:c8:df:12:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:f3:0f:83:bf:0a
epair1b: Ethernet address: 02:f3:0f:83:bf:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
bridge0: Ethernet address: 58:9c:fc:10:ff:c7
bridge1: Ethernet address: 58:9c:fc:10:ff:b2
bridge0: link state changed to UP
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
bridge1: link state changed to UP
epair0b: promiscuous mode enabled
epair1b: promiscuous mode enabled
epair1a: promiscuous mode disabled
epair0a: promiscuous mode disabled
bridge0: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
bridge1: link state changed to DOWN
passed [5.220s]
sys/net/if_bridge_test:stp_validation -> epair0a: Ethernet address: 02:16:ee:05:51:0a
epair0b: Ethernet address: 02:16:ee:05:51:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:5d:0c:d4:57:0a
epair1b: Ethernet address: 02:5d:0c:d4:57:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
bridge0: Ethernet address: 58:9c:fc:10:ff:c7
bridge0: link state changed to UP
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
epair1b: promiscuous mode enabled
epair0b: promiscuous mode enabled
epair0b: promiscuous mode disabled
epair0b: promiscuous mode enabled
epair0b: promiscuous mode disabled
epair0b: promiscuous mode enabled
epair0b: promiscuous mode disabled
epair0b: promiscuous mode enabled
epair0b: promiscuous mode disabled
epair0b: promiscuous mode enabled
epair0b: promiscuous mode disabled
epair0b: promiscuous mode enabled
epair0b: promiscuous mode disabled
epair1b: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
bridge0: link state changed to DOWN
passed [23.850s]
sys/net/if_bridge_test:stp_vlan -> epair0a: Ethernet address: 02:3b:91:4c:7d:0a
epair0b: Ethernet address: 02:3b:91:4c:7d:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:2a:46:e7:8a:0a
epair1b: Ethernet address: 02:2a:46:e7:8a:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
bridge0: Ethernet address: 58:9c:fc:10:ff:c7
bridge1: Ethernet address: 58:9c:fc:10:ff:b2
bridge0: link state changed to UP
epair0a: promiscuous mode enabled
vlan0: promiscuous mode enabled
epair1a: promiscuous mode enabled
vlan1: promiscuous mode enabled
bridge1: link state changed to UP
epair0b: promiscuous mode enabled
vlan0: promiscuous mode enabled
epair1b: promiscuous mode enabled
vlan1: promiscuous mode enabled
epair1a: promiscuous mode disabled
vlan1: promiscuous mode disabled
epair0a: promiscuous mode disabled
vlan0: promiscuous mode disabled
bridge0: link state changed to DOWN
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
vlan0: link state changed to DOWN
vlan0: link state changed to DOWN
epair0b: promiscuous mode disabled
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
vlan1: link state changed to DOWN
vlan1: link state changed to DOWN
epair1b: promiscuous mode disabled
vlan1: promiscuous mode disabled
vlan0: promiscuous mode disabled
bridge1: link state changed to DOWN
passed [5.277s]
sys/net/if_bridge_test:vlan -> epair0a: Ethernet address: 02:65:86:a6:b1:0a
epair0b: Ethernet address: 02:65:86:a6:b1:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:88:d6:c4:b3:0a
epair1b: Ethernet address: 02:88:d6:c4:b3:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
bridge0: Ethernet address: 58:9c:fc:10:ff:c7
bridge0: link state changed to UP
epair0a: promiscuous mode enabled
epair1a: promiscuous mode enabled
*** /usr/src/contrib/kyua/utils/process/executor.cpp:822: Invariant check failed: PID 44987 already in all_exec_handles; not properly cleaned up or reused too fast
*** Fatal signal 6 received
*** Log file is /.kyua/logs/kyua.20231210-060523.log
*** Please report this problem to kyua-discuss@googlegroups.com detailing what you were doing before the crash happened; if possible, include the log file mentioned above
epair0b: link state changed to DOWN
epair0b.1: link state changed to DOWN
epair0a: link state changed to DOWN
pid 786 (kyua), jid 0, uid 0: exited on signal 6 (core dumped)
Abort trap (core dumped)
+ rc=134
+ set -e
+ [ 134 -ne 0 ]
+ [ 134 -ne 1 ]
+ exit 134
+ tar cvf /dev/vtbd1 -C /meta .
a .
a ./disable-zfs-tests.sh
a ./disable-dtrace-tests.sh
a ./auto-shutdown
a ./run.sh
a ./run-kyua.sh
a ./disable-notyet-tests.sh
+ [ -f /meta/auto-shutdown ]
+ uname -p
+ shutdown -p now
Shutdown NOW!
shutdown: [pid 45011]
+ startmsg .
+ check_startmsgs
+ [ -n yes ]
+ checkyesno rc_startmsgs
+ eval '_value=$rc_startmsgs'
+ _value=YES
+ debug 'checkyesno: rc_startmsgs is set to YES.'
+ return 0
+ echo .
.
+ _return=0
+ umask 0022
+ [ 0 -ne 0 ]
+ return 0
+ _run_rc_postcmd
+ [ -n '' ]
+ return 0
+ return 0
2023-12-10T06:48:38.002152+00:00 - shutdown 45011 - - power-down by root:
System shutdown time has arrived
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop... epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b.1: link state changed to DOWN
bridge0: link state changed to DOWN
Syncing disks, vnodes remaining... 2 0 0 done
All buffers synced.
pid 508 (devd), jid 0, uid 0: exited on signal 11 (no core dump - other error)
Uptime: 43m19s
acpi0: Powering system off
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-14-amd64-240' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-zfs-tests.sh
x ./disable-dtrace-tests.sh
x ./auto-shutdown
x ./run.sh
x ./run-kyua.sh
x ./disable-notyet-tests.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-stable-14-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-stable-14-amd64-test] $ /bin/sh -xe /tmp/jenkins2910913915714289238.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-stable-14-amd64-test', 'commit': '1ed12844a18610451ffc93155d825e5cfcfd9747', 'branch': 'stable-14', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: stable-14/latest_tested/amd64/amd64 -> ../../1ed12844a18610451ffc93155d825e5cfcfd9747/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address