FreeBSD-main-amd64-test - Build #22059 - Failure
Date: Sun, 11 Sep 2022 12:36:01 UTC
FreeBSD-main-amd64-test - Build #22059 (975407b1d8dcceac2b54e2c4df96aadec7dc4c3a) - Failure
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/22059/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/22059/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/22059/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
975407b1d8dcceac2b54e2c4df96aadec7dc4c3a by wulf:
usbhid(4): Increase probe priority to BUS_PROBE_DEFAULT + 1
The end of the build log:
[...truncated 4.23 MB...]
Limiting icmp ping response from 258 to 207 packets/sec
Limiting icmp ping response from 255 to 211 packets/sec
Limiting icmp ping response from 271 to 205 packets/sec
Limiting icmp ping response from 274 to 211 packets/sec
Limiting icmp ping response from 266 to 192 packets/sec
Limiting icmp ping response from 274 to 216 packets/sec
Limiting icmp ping response from 255 to 199 packets/sec
epair51b: link state changed to DOWN
epair51a: link state changed to DOWN
passed [18.538s]
sys/netpfil/common/dummynet:pf_queue_v6 -> epair51a: Ethernet address: 02:e5:d9:a3:fb:0a
epair51b: Ethernet address: 02:e5:d9:a3:fb:0b
epair51a: link state changed to UP
epair51b: link state changed to UP
epair51b: link state changed to DOWN
epair51a: link state changed to DOWN
passed [14.046s]
sys/netpfil/common/forward:ipf_v4 -> epair51a: Ethernet address: 02:91:39:f8:2b:0a
epair51b: Ethernet address: 02:91:39:f8:2b:0b
epair51a: link state changed to UP
epair51b: link state changed to UP
epair52a: Ethernet address: 02:04:32:49:c7:0a
epair52b: Ethernet address: 02:04:32:49:c7:0b
epair52a: link state changed to UP
epair52b: link state changed to UP
epair51a: promiscuous mode enabled
epair52a: promiscuous mode enabled
epair51a: promiscuous mode disabled
epair52a: promiscuous mode disabled
epair51a: promiscuous mode enabled
epair52a: promiscuous mode enabled
epair51a: promiscuous mode disabled
epair52a: promiscuous mode disabled
epair51a: promiscuous mode enabled
epair52a: promiscuous mode enabled
epair51a: promiscuous mode disabled
epair52a: promiscuous mode disabled
epair51b: link state changed to DOWN
epair51a: link state changed to DOWN
epair52b: link state changed to DOWN
epair52a: link state changed to DOWN
passed [35.910s]
sys/netpfil/common/forward:ipfw_v4 -> epair51a: Ethernet address: 02:91:19:ac:3e:0a
epair51b: Ethernet address: 02:91:19:ac:3e:0b
epair51a: link state changed to UP
epair51b: link state changed to UP
epair52a: Ethernet address: 02:52:74:9f:e5:0a
epair52b: Ethernet address: 02:52:74:9f:e5:0b
epair52a: link state changed to UP
epair52b: link state changed to UP
epair51a: promiscuous mode enabled
epair52a: promiscuous mode enabled
epair51a: promiscuous mode disabled
epair52a: promiscuous mode disabled
epair52a: promiscuous mode enabled
epair51a: promiscuous mode enabled
epair51a: promiscuous mode disabled
epair52a: promiscuous mode disabled
epair52a: promiscuous mode enabled
epair51a: promiscuous mode enabled
epair51a: promiscuous mode disabled
epair52a: promiscuous mode disabled
epair51b: link state changed to DOWN
epair51a: link state changed to DOWN
epair52b: link state changed to DOWN
epair52a: link state changed to DOWN
passed [37.118s]
sys/netpfil/common/forward:pf_v4 -> epair51a: Ethernet address: 02:9c:16:71:c1:0a
epair51b: Ethernet address: 02:9c:16:71:c1:0b
epair51a: link state changed to UP
epair51b: link state changed to UP
epair52a: Ethernet address: 02:57:83:e4:ec:0a
epair52b: Ethernet address: 02:57:83:e4:ec:0b
epair52a: link state changed to UP
epair52b: link state changed to UP
epair51a: promiscuous mode enabled
epair52a: promiscuous mode enabled
epair51a: promiscuous mode disabled
epair52a: promiscuous mode disabled
epair52a: promiscuous mode enabled
epair51a: promiscuous mode enabled
epair51a: promiscuous mode disabled
epair52a: promiscuous mode disabled
epair52a: promiscuous mode enabled
epair51a: promiscuous mode enabled
epair51a: promiscuous mode disabled
epair52a: promiscuous mode disabled
epair51b: link state changed to DOWN
epair51a: link state changed to DOWN
epair52b: link state changed to DOWN
epair52a: link state changed to DOWN
passed [35.729s]
sys/netpfil/common/fragments:ipf_fragments -> epair51a: Ethernet address: 02:5e:7e:c6:9e:0a
epair51b: Ethernet address: 02:5e:7e:c6:9e:0b
epair51a: link state changed to UP
epair51b: link state changed to UP
nd6_setmtu0: new link MTU on epair51b (200) is too small for IPv6
nd6_setmtu0: new link MTU on epair51a (200) is too small for IPv6
epair51a: link state changed to DOWN
epair51b: link state changed to DOWN
passed [11.169s]
sys/netpfil/common/fragments:ipfw_fragments -> epair51a: Ethernet address: 02:54:25:f4:84:0a
epair51b: Ethernet address: 02:54:25:f4:84:0b
epair51a: link state changed to UP
epair51b: link state changed to UP
nd6_setmtu0: new link MTU on epair51b (200) is too small for IPv6
nd6_setmtu0: new link MTU on epair51a (200) is too small for IPv6
epair51a: link state changed to DOWN
epair51b: link state changed to DOWN
passed [11.223s]
sys/netpfil/common/fragments:pf_fragments -> epair51a: Ethernet address: 02:ae:9c:1b:1e:0a
epair51b: Ethernet address: 02:ae:9c:1b:1e:0b
epair51a: link state changed to UP
epair51b: link state changed to UP
nd6_setmtu0: new link MTU on epair51b (200) is too small for IPv6
nd6_setmtu0: new link MTU on epair51a (200) is too small for IPv6
epair51a: link state changed to DOWN
epair51b: link state changed to DOWN
passed [11.318s]
sys/netpfil/common/nat:ipfnat_basic -> epair51a: Ethernet address: 02:69:a0:da:8e:0a
epair51b: Ethernet address: 02:69:a0:da:8e:0b
epair51a: link state changed to UP
epair51b: link state changed to UP
epair52a: Ethernet address: 02:bf:8b:1d:a1:0a
epair52b: Ethernet address: 02:bf:8b:1d:a1:0b
epair52a: link state changed to UP
epair52b: link state changed to UP
epair53a: Ethernet address: 02:f4:14:7e:31:0a
epair53b: Ethernet address: 02:f4:14:7e:31:0b
epair53a: link state changed to UP
epair53b: link state changed to UP
epair51b: link state changed to DOWN
epair51a: link state changed to DOWN
epair52a: link state changed to DOWN
epair52b: link state changed to DOWN
epair53a: link state changed to DOWN
epair53b: link state changed to DOWN
passed [2.335s]
sys/netpfil/common/nat:ipfw_basic -> epair51a: Ethernet address: 02:74:7d:8b:eb:0a
epair51b: Ethernet address: 02:74:7d:8b:eb:0b
epair51a: link state changed to UP
epair51b: link state changed to UP
epair52a: Ethernet address: 02:c8:da:99:c4:0a
epair52b: Ethernet address: 02:c8:da:99:c4:0b
epair52a: link state changed to UP
epair52b: link state changed to UP
epair53a: Ethernet address: 02:26:82:30:86:0a
epair53b: Ethernet address: 02:26:82:30:86:0b
epair53a: link state changed to UP
epair53b: link state changed to UP
epair51b: link state changed to DOWN
epair51a: link state changed to DOWN
epair52a: link state changed to DOWN
epair52b: link state changed to DOWN
epair53a: link state changed to DOWN
epair53b: link state changed to DOWN
passed [2.444s]
sys/netpfil/common/nat:ipfw_cgn -> epair51a: Ethernet address: 02:49:20:bd:41:0a
epair51b: Ethernet address: 02:49:20:bd:41:0b
epair51a: link state changed to UP
epair51b: link state changed to UP
epair52a: Ethernet address: 02:09:24:5c:02:0a
epair52b: Ethernet address: 02:09:24:5c:02:0b
epair52a: link state changed to UP
epair52b: link state changed to UP
epair53a: Ethernet address: 02:7f:59:76:d8:0a
epair53b: Ethernet address: 02:7f:59:76:d8:0b
epair53a: link state changed to UP
epair53b: link state changed to UP
panic: ipreass_callout: stray callout on bucket 0xfffffe008fbf3700, 3547 < 3548
cpuid = 1
time = 1662899760
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe000edced10
vpanic() at vpanic+0x151/frame 0xfffffe000edced60
panic() at panic+0x43/frame 0xfffffe000edcedc0
ipreass_callout() at ipreass_callout+0x201/frame 0xfffffe000edcee00
softclock_call_cc() at softclock_call_cc+0x151/frame 0xfffffe000edceec0
softclock_thread() at softclock_thread+0xc6/frame 0xfffffe000edceef0
fork_exit() at fork_exit+0x80/frame 0xfffffe000edcef30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe000edcef30
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
KDB: enter: panic
[ thread pid 2 tid 100029 ]
Stopped at kdb_enter+0x32: movq $0,0x1295053(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid = 1
dynamic pcpu = 0xfffffe008f594e40
curthread = 0xfffffe00112b63a0: pid 2 tid 100029 critnest 1 "clock (0)"
curpcb = 0xfffffe00112b68c0
fpcurthread = none
idlethread = 0xfffffe0011221c80: tid 100004 "idle: cpu1"
self = 0xffffffff82611000
curpmap = 0xffffffff81e81bf0
tssp = 0xffffffff82611384
rsp0 = 0xfffffe000edcf000
kcr3 = 0x8000000002569003
ucr3 = 0xffffffffffffffff
scr3 = 0x31bfcb95
gs32p = 0xffffffff82611404
ldt = 0xffffffff82611444
tss = 0xffffffff82611434
curvnet = 0xfffff800030d3000
spin locks held:
db:0:kdb.enter.panic> reset
cpu_reset: Restarting BSP
cpu_reset_proxy: Stopped CPU 1
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-22059' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./disable-dtrace-tests.sh
x ./disable-zfs-tests.sh
x ./auto-shutdown
x ./run.sh
x ./run-kyua.sh
x ./disable-notyet-tests.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins7528737661231001318.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '975407b1d8dcceac2b54e2c4df96aadec7dc4c3a', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../975407b1d8dcceac2b54e2c4df96aadec7dc4c3a/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address