FreeBSD-main-amd64-test - Build #21001 - Failure
Date: Wed, 30 Mar 2022 10:59:47 UTC
FreeBSD-main-amd64-test - Build #21001 (d27c9f5bc38eda519145092c13bca2823a9998d8) - Failure
Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/21001/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/21001/changes
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/21001/console
Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
this is a notification to note that these changes have
not been fully tested by the CI system
Change summaries:
(Those commits are likely but not certainly responsible)
9bb06778f822ad6b47d2a825d47e284ca8dd29a1 by kp:
pf: support listing ethernet anchors
514039bb90853473078acd2fbba1b1bfb359aab5 by kp:
libpfct: Return errno from pfctl_add_eth_rule()
81cac0d2f6035e02430fcdfa0ac8a081a9343f8d by kp:
pf: add missing input/error validation for DIOCGETETHRULE
d27c9f5bc38eda519145092c13bca2823a9998d8 by kp:
pf: fixup match rules
The end of the build log:
[...truncated 4.17 MB...]
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [2.271s]
sys/netpfil/pf/ether:captive -> epair0a: Ethernet address: 02:47:12:76:01:0a
epair0b: Ethernet address: 02:47:12:76:01:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:a6:9a:dd:5f:0a
epair1b: Ethernet address: 02:a6:9a:dd:5f:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
lo0: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [0.299s]
sys/netpfil/pf/ether:captive_long -> epair0a: Ethernet address: 02:8f:b0:15:cd:0a
epair0b: Ethernet address: 02:8f:b0:15:cd:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:23:d4:d4:9f:0a
epair1b: Ethernet address: 02:23:d4:d4:9f:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
lo0: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [0.317s]
sys/netpfil/pf/ether:direction -> epair0a: Ethernet address: 02:0c:5f:3d:14:0a
epair0b: Ethernet address: 02:0c:5f:3d:14:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [3.344s]
sys/netpfil/pf/ether:dummynet -> epair0a: Ethernet address: 02:c9:92:fe:fe:0a
epair0b: Ethernet address: 02:c9:92:fe:fe:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [24.788s]
sys/netpfil/pf/ether:ip -> epair0a: Ethernet address: 02:c1:34:a0:7c:0a
epair0b: Ethernet address: 02:c1:34:a0:7c:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [22.280s]
sys/netpfil/pf/ether:mac -> epair0a: Ethernet address: 02:f7:8e:d0:05:0a
epair0b: Ethernet address: 02:f7:8e:d0:05:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
failed: Failed to set PF rules in alcatraz [4.366s]
sys/netpfil/pf/ether:proto -> epair0a: Ethernet address: 02:8d:0d:35:b6:0a
epair0b: Ethernet address: 02:8d:0d:35:b6:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed [2.209s]
sys/netpfil/pf/forward:v4 -> epair0a: Ethernet address: 02:a0:6d:86:f4:0a
epair0b: Ethernet address: 02:a0:6d:86:f4:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:e3:f8:37:0c:0a
epair1b: Ethernet address: 02:e3:f8:37:0c:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair1a: promiscuous mode enabled
epair0a: promiscuous mode enabled
epair0a: promiscuous mode disabled
epair1a: promiscuous mode disabled
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1b: link state changed to DOWN
epair1a: link state changed to DOWN
passed [9.598s]
sys/netpfil/pf/forward:v6 -> skipped: https://bugs.freebsd.org/260460 [0.030s]
sys/netpfil/pf/fragmentation:mtu_diff -> epair0a: Ethernet address: 02:6a:47:84:34:0a
epair0b: Ethernet address: 02:6a:47:84:34:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:4e:a4:df:75:0a
epair1b: Ethernet address: 02:4e:a4:df:75:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed [0.248s]
sys/netpfil/pf/fragmentation:overindex -> epair0a: Ethernet address: 02:36:db:b2:08:0a
epair0b: Ethernet address: 02:36:db:b2:08:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: promiscuous mode enabled
epair0b: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [6.059s]
sys/netpfil/pf/fragmentation:overlimit -> epair0a: Ethernet address: 02:73:22:65:ad:0a
epair0b: Ethernet address: 02:73:22:65:ad:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: promiscuous mode enabled
epair0b: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [11.069s]
sys/netpfil/pf/fragmentation:overreplace -> epair0a: Ethernet address: 02:37:2d:79:05:0a
epair0b: Ethernet address: 02:37:2d:79:05:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: promiscuous mode enabled
epair0b: promiscuous mode disabled
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [3.936s]
sys/netpfil/pf/fragmentation:too_many_fragments -> epair0a: Ethernet address: 02:cb:c7:79:26:0a
epair0b: Ethernet address: 02:cb:c7:79:26:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
nd6_setmtu0: new link MTU on epair0b (200) is too small for IPv6
nd6_setmtu0: new link MTU on epair0a (200) is too small for IPv6
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed [11.299s]
sys/netpfil/pf/fragmentation:v6 -> epair0a: Ethernet address: 02:5a:84:0a:1b:0a
epair0b: Ethernet address: 02:5a:84:0a:1b:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:06:06:20:0e:0a
epair1b: Ethernet address: 02:06:06:20:0e:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
Memory modified after free 0xfffff8008f4b0a00(248) val=deadc0dd @ 0xfffff8008f4b0ac0
panic: Most recently used by pf_ifnet
cpuid = 0
time = 1648637985
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe00cccae230
vpanic() at vpanic+0x17f/frame 0xfffffe00cccae280
panic() at panic+0x43/frame 0xfffffe00cccae2e0
mtrash_ctor() at mtrash_ctor+0x81/frame 0xfffffe00cccae300
item_ctor() at item_ctor+0x2cb/frame 0xfffffe00cccae350
malloc() at malloc+0x86/frame 0xfffffe00cccae390
rn_inithead() at rn_inithead+0x6e/frame 0xfffffe00cccae3d0
lradix6_init() at lradix6_init+0x73/frame 0xfffffe00cccae420
setup_fd_instance() at setup_fd_instance+0x369/frame 0xfffffe00cccae4b0
rebuild_fd_flm() at rebuild_fd_flm+0x98/frame 0xfffffe00cccae4f0
rebuild_fd() at rebuild_fd+0x136/frame 0xfffffe00cccae520
add_route_nhop() at add_route_nhop+0xdb/frame 0xfffffe00cccae560
rib_add_route() at rib_add_route+0x306/frame 0xfffffe00cccae5f0
ifa_maintain_loopback_route() at ifa_maintain_loopback_route+0x185/frame 0xfffffe00cccae730
in6_update_ifa() at in6_update_ifa+0xd5b/frame 0xfffffe00cccae8a0
in6_ifattach() at in6_ifattach+0x5aa/frame 0xfffffe00cccaea20
in6_if_up() at in6_if_up+0x7e/frame 0xfffffe00cccaea60
nd6_ioctl() at nd6_ioctl+0x723/frame 0xfffffe00cccaeae0
in6_control() at in6_control+0xbf3/frame 0xfffffe00cccaebd0
ifioctl() at ifioctl+0x7f4/frame 0xfffffe00cccaecc0
kern_ioctl() at kern_ioctl+0x202/frame 0xfffffe00cccaed30
sys_ioctl() at sys_ioctl+0x126/frame 0xfffffe00cccaee00
amd64_syscall() at amd64_syscall+0x6a6/frame 0xfffffe00cccaef30
fast_syscall_common() at fast_syscall_common+0xf8/frame 0xfffffe00cccaef30
--- syscall (54, FreeBSD ELF64, sys_ioctl), rip = 0x33bd60cc3b6a, rsp = 0x33bd5cb618d8, rbp = 0x33bd5cb61920 ---
KDB: enter: panic
[ thread pid 56138 tid 102224 ]
Stopped at kdb_enter+0x37: movq $0,0x127f1ee(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid = 0
dynamic pcpu = 0x7c31c0
curthread = 0xfffffe00ccf93560: pid 56138 tid 102224 critnest 1 "ifconfig"
curpcb = 0xfffffe00ccf93a70
fpcurthread = 0xfffffe00ccf93560: pid 56138 "ifconfig"
idlethread = 0xfffffe001122f3a0: tid 100003 "idle: cpu0"
self = 0xffffffff82410000
curpmap = 0xfffffe00ccfe2518
tssp = 0xffffffff82410384
rsp0 = 0xfffffe00cccaf000
kcr3 = 0x8000000187ac11f7
ucr3 = 0x800000008f53e9f7
scr3 = 0x8f53e9f7
gs32p = 0xffffffff82410404
ldt = 0xffffffff82410444
tss = 0xffffffff82410434
curvnet = 0xfffff80124174700
spin locks held:
db:0:kdb.enter.panic> reset
+ rc=0
+ echo 'bhyve return code = 0'
bhyve return code = 0
+ sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-21001' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=meta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./auto-shutdown
x ./disable-notyet-tests.sh
x ./disable-zfs-tests.sh
x ./run.sh
x ./disable-dtrace-tests.sh
x ./run-kyua.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory
+ report=test-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins7598169307537355085.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'd27c9f5bc38eda519145092c13bca2823a9998d8', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../d27c9f5bc38eda519145092c13bca2823a9998d8/amd64/amd64\n"
Recording test results
ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address