svn commit: r237317 - in stable/9: share/man/man4 sys/cam sys/cam/scsi sys/conf

Alexander Motin mav at FreeBSD.org
Wed Jun 20 14:36:10 UTC 2012


Author: mav
Date: Wed Jun 20 14:36:09 2012
New Revision: 237317
URL: http://svn.freebsd.org/changeset/base/237317

Log:
  MFC r236712:
  To make CAM debugging easier, compile in some debug flags (CAM_DEBUG_INFO,
  CAM_DEBUG_CDB, CAM_DEBUG_PERIPH and CAM_DEBUG_PROBE) by default.
  List of these flags can be modified with CAM_DEBUG_COMPILE kernel option.
  CAMDEBUG kernel option still enables all possible debug, if not overriden.
  
  Additional 50KB of kernel size is a good price for the ability to debug
  problems without rebuilding the kernel. In case where size is important,
  debugging can be compiled out by setting CAM_DEBUG_COMPILE option to 0.

Modified:
  stable/9/share/man/man4/scsi.4
  stable/9/sys/cam/cam_debug.h
  stable/9/sys/cam/cam_xpt.c
  stable/9/sys/cam/cam_xpt.h
  stable/9/sys/cam/scsi/scsi_sa.c
  stable/9/sys/cam/scsi/scsi_target.c
  stable/9/sys/conf/NOTES
  stable/9/sys/conf/options
Directory Properties:
  stable/9/share/man/man4/   (props changed)
  stable/9/sys/   (props changed)
  stable/9/sys/conf/   (props changed)

Modified: stable/9/share/man/man4/scsi.4
==============================================================================
--- stable/9/share/man/man4/scsi.4	Wed Jun 20 14:29:01 2012	(r237316)
+++ stable/9/share/man/man4/scsi.4	Wed Jun 20 14:36:09 2012	(r237317)
@@ -24,7 +24,7 @@
 .\" SUCH DAMAGE.
 .\"
 .\" $FreeBSD$
-.Dd March 4, 2010
+.Dd June 7, 2012
 .Dt CAM 4
 .Os
 .Sh NAME
@@ -43,6 +43,7 @@
 .Cd "options CAM_DEBUG_BUS=-1"
 .Cd "options CAM_DEBUG_TARGET=-1"
 .Cd "options CAM_DEBUG_LUN=-1"
+.Cd "options CAM_DEBUG_COMPILE=CAM_DEBUG_INFO|CAM_DEBUG_CDB|CAM_DEBUG_PROBE"
 .Cd "options CAM_DEBUG_FLAGS=CAM_DEBUG_INFO|CAM_DEBUG_CDB"
 .Cd "options CAM_MAX_HIGHPOWER=4"
 .Cd "options SCSI_NO_SENSE_STRINGS"
@@ -72,12 +73,11 @@ There are a number of generic kernel con
 subsystem:
 .Bl -tag -width SCSI_NO_SENSE_STRINGS
 .It Dv CAMDEBUG
-This option enables the
+This option compiles in all the
 .Nm
 debugging printf code.
 This will not actually
 cause any debugging information to be printed out when included by itself.
-Enabling printouts requires additional configuration.
 See below for details.
 .It Dv "CAM_MAX_HIGHPOWER=4"
 This sets the maximum allowable number of concurrent "high power" commands.
@@ -248,54 +248,53 @@ see other
 .Nm
 device entries.
 .Sh DIAGNOSTICS
-When the kernel is compiled with options CAMDEBUG, an XPT_DEBUG CCB can be
-used to enable various amounts of tracing information on any
-specific device.
-Devices not being traced will not produce trace information.
-There are currently four debugging flags that may be turned on:
+An XPT_DEBUG CCB can be used to enable various amounts of tracing information
+on any specific bus/device from the list of options compiled into the kernel.
+There are currently seven debugging flags that may be compiled in and used:
 .Bl -tag -width CAM_DEBUG_SUBTRACE
 .It Dv CAM_DEBUG_INFO
-This debugging flag enables general informational printfs for the device
+This flag enables general informational printfs for the device
 or devices in question.
 .It Dv CAM_DEBUG_TRACE
-This debugging flag enables function-level command flow tracing.
+This flag enables function-level command flow tracing.
 i.e.\&
 kernel printfs will happen at the entrance and exit of various functions.
 .It Dv CAM_DEBUG_SUBTRACE
-This debugging flag enables debugging output internal to various functions.
+This flag enables debugging output internal to various functions.
 .It Dv CAM_DEBUG_CDB
-This debugging flag will cause the kernel to print out all
+This flag will cause the kernel to print out all
+.Tn ATA
+and
 .Tn SCSI
 commands sent to a particular device or devices.
+.It Dv CAM_DEBUG_XPT
+This flag will enable command scheduler tracing.
+.It Dv CAM_DEBUG_PERIPH
+This flag will enable peripheral drivers messages.
+.It Dv CAM_DEBUG_PROBE
+This flag will enable devices probe process tracing.
 .El
 .Pp
 Some of these flags, most notably
 .Dv CAM_DEBUG_TRACE
 and
-.Dv CAM_DEBUG_SUBTRACE
-will produce kernel printfs in EXTREME numbers,
-and because of that, they are not especially useful.
-There are not many things logged at the
-.Dv CAM_DEBUG_INFO
-level, so it is not especially useful.
-The most useful debugging flag is the
-.Dv CAM_DEBUG_CDB
-flag.
+.Dv CAM_DEBUG_SUBTRACE ,
+will produce kernel printfs in EXTREME numbers.
+.Pp
 Users can enable debugging from their kernel config file, by using
 the following kernel config options:
-.Bl -tag -width CAM_DEBUG_TARGET
+.Bl -tag -width CAM_DEBUG_COMPILE
 .It Dv CAMDEBUG
-This enables
+This builds into the kernel all possible
 .Nm
 debugging.
-Without this option, users will not even be able
-to turn on debugging from userland via
-.Xr camcontrol 8 .
-.It Dv CAM_DEBUG_FLAGS
-This allows the user to set the various debugging flags described above
-in a kernel config file.
+.It Dv CAM_DEBUG_COMPILE
+This allows to specify support for which debugging flags described above
+should be built into the kernel.
 Flags may be ORed together if the user wishes to
 see printfs for multiple debugging levels.
+.It Dv CAM_DEBUG_FLAGS
+This allows to set the various debugging flags from a kernel config file.
 .It Dv CAM_DEBUG_BUS
 Specify a bus to debug.
 To debug all busses, set this to -1.
@@ -307,17 +306,9 @@ Specify a lun to debug.
 To debug all luns, set this to -1.
 .El
 .Pp
-When specifying a bus, target or lun to debug, you
-.Em MUST
-specify all three bus/target/lun options above.
-Using wildcards, you
-should be able to enable debugging on most anything.
-.Pp
-Users may also enable debugging printfs on the fly, if the
-.Dv CAMDEBUG
-option is their config file, by using the
+Users may also enable debugging on the fly by using the
 .Xr camcontrol 8
-utility.
+utility, if wanted options built into the kernel.
 See
 .Xr camcontrol 8
 for details.

Modified: stable/9/sys/cam/cam_debug.h
==============================================================================
--- stable/9/sys/cam/cam_debug.h	Wed Jun 20 14:29:01 2012	(r237316)
+++ stable/9/sys/cam/cam_debug.h	Wed Jun 20 14:36:09 2012	(r237317)
@@ -44,7 +44,35 @@ typedef enum {
 	CAM_DEBUG_PROBE		= 0x40  /* print out probe actions */
 } cam_debug_flags;
 
-#if defined(CAMDEBUG) && defined(_KERNEL)
+#if defined(_KERNEL)
+
+#ifndef CAM_DEBUG_FLAGS
+#define CAM_DEBUG_FLAGS		CAM_DEBUG_NONE
+#endif
+
+#ifndef CAM_DEBUG_COMPILE
+#ifdef CAMDEBUG
+#define CAM_DEBUG_COMPILE	(-1)
+#else
+#define CAM_DEBUG_COMPILE	(CAM_DEBUG_INFO | CAM_DEBUG_CDB | \
+				 CAM_DEBUG_PERIPH | CAM_DEBUG_PROBE | \
+				 CAM_DEBUG_FLAGS)
+#endif
+#endif
+
+#ifndef CAM_DEBUG_BUS
+#define CAM_DEBUG_BUS		(-1)
+#endif
+#ifndef CAM_DEBUG_TARGET
+#define CAM_DEBUG_TARGET	(-1)
+#endif
+#ifndef CAM_DEBUG_LUN
+#define CAM_DEBUG_LUN		(-1)
+#endif
+
+#ifndef CAM_DEBUG_DELAY
+#define CAM_DEBUG_DELAY		0
+#endif
 
 /* Path we want to debug */
 extern struct cam_path *cam_dpath;
@@ -52,48 +80,48 @@ extern struct cam_path *cam_dpath;
 extern u_int32_t cam_dflags;
 /* Printf delay value (to prevent scrolling) */
 extern u_int32_t cam_debug_delay;
- 
+
 /* Debugging macros. */
 #define	CAM_DEBUGGED(path, flag)			\
-	((cam_dflags & (flag))				\
+	(((flag) & (CAM_DEBUG_COMPILE) & cam_dflags)	\
 	 && (cam_dpath != NULL)				\
 	 && (xpt_path_comp(cam_dpath, path) >= 0)	\
 	 && (xpt_path_comp(cam_dpath, path) < 2))
 
 #define	CAM_DEBUG(path, flag, printfargs)		\
-	if ((cam_dflags & (flag))			\
+	if (((flag) & (CAM_DEBUG_COMPILE) & cam_dflags)	\
 	 && (cam_dpath != NULL)				\
 	 && (xpt_path_comp(cam_dpath, path) >= 0)	\
 	 && (xpt_path_comp(cam_dpath, path) < 2)) {	\
 		xpt_print_path(path);			\
- 		printf printfargs;			\
+		printf printfargs;			\
 		if (cam_debug_delay != 0)		\
 			DELAY(cam_debug_delay);		\
 	}
 
 #define	CAM_DEBUG_PRINT(flag, printfargs)		\
-	if (cam_dflags & (flag)) {			\
+	if (((flag) & (CAM_DEBUG_COMPILE) & cam_dflags)) {	\
 		printf("cam_debug: ");			\
- 		printf printfargs;			\
+		printf printfargs;			\
 		if (cam_debug_delay != 0)		\
 			DELAY(cam_debug_delay);		\
 	}
 
 #define	CAM_DEBUG_PATH_PRINT(flag, path, printfargs)	\
-	if (cam_dflags & (flag)) {			\
+	if (((flag) & (CAM_DEBUG_COMPILE) & cam_dflags)) {	\
 		xpt_print(path, "cam_debug: ");		\
- 		printf printfargs;			\
+		printf printfargs;			\
 		if (cam_debug_delay != 0)		\
 			DELAY(cam_debug_delay);		\
 	}
 
-#else /* !CAMDEBUG || !_KERNEL */
+#else /* !_KERNEL */
 
 #define	CAM_DEBUGGED(A, B)	0
 #define	CAM_DEBUG(A, B, C)
 #define	CAM_DEBUG_PRINT(A, B)
 #define	CAM_DEBUG_PATH_PRINT(A, B, C)
 
-#endif /* CAMDEBUG && _KERNEL */
+#endif /* _KERNEL */
 
 #endif /* _CAM_CAM_DEBUG_H */

Modified: stable/9/sys/cam/cam_xpt.c
==============================================================================
--- stable/9/sys/cam/cam_xpt.c	Wed Jun 20 14:29:01 2012	(r237316)
+++ stable/9/sys/cam/cam_xpt.c	Wed Jun 20 14:36:09 2012	(r237317)
@@ -188,21 +188,15 @@ static struct cdevsw xpt_cdevsw = {
 };
 
 /* Storage for debugging datastructures */
-#ifdef	CAMDEBUG
 struct cam_path *cam_dpath;
-#ifdef	CAM_DEBUG_FLAGS
 u_int32_t cam_dflags = CAM_DEBUG_FLAGS;
-#else
-u_int32_t cam_dflags = CAM_DEBUG_NONE;
-#endif
 TUNABLE_INT("kern.cam.dflags", &cam_dflags);
 SYSCTL_UINT(_kern_cam, OID_AUTO, dflags, CTLFLAG_RW,
-	&cam_dflags, 0, "Cam Debug Flags");
-u_int32_t cam_debug_delay;
+	&cam_dflags, 0, "Enabled debug flags");
+u_int32_t cam_debug_delay = CAM_DEBUG_DELAY;
 TUNABLE_INT("kern.cam.debug_delay", &cam_debug_delay);
 SYSCTL_UINT(_kern_cam, OID_AUTO, debug_delay, CTLFLAG_RW,
-	&cam_debug_delay, 0, "Cam Debug Flags");
-#endif
+	&cam_debug_delay, 0, "Delay in us after each debug message");
 
 /* Our boot-time initialization hook */
 static int cam_module_event_handler(module_t, int /*modeventtype_t*/, void *);
@@ -2472,9 +2466,7 @@ xpt_action(union ccb *start_ccb)
 void
 xpt_action_default(union ccb *start_ccb)
 {
-#ifdef CAMDEBUG
 	char cdb_str[(SCSI_MAX_CDBLEN * 3) + 1];
-#endif
 	struct cam_path *path;
 
 	path = start_ccb->ccb_h.path;
@@ -2980,16 +2972,17 @@ xpt_action_default(union ccb *start_ccb)
 		break;
 	}
 	case XPT_DEBUG: {
-#ifdef CAMDEBUG
-#ifdef CAM_DEBUG_DELAY
-		cam_debug_delay = CAM_DEBUG_DELAY;
-#endif
+		/* Check that all request bits are supported. */
+		if (start_ccb->cdbg.flags & ~CAM_DEBUG_COMPILE) {
+			start_ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
+			break;
+		}
+
 		cam_dflags = start_ccb->cdbg.flags;
 		if (cam_dpath != NULL) {
 			xpt_free_path(cam_dpath);
 			cam_dpath = NULL;
 		}
-
 		if (cam_dflags != CAM_DEBUG_NONE) {
 			if (xpt_create_path(&cam_dpath, xpt_periph,
 					    start_ccb->ccb_h.path_id,
@@ -3007,9 +3000,6 @@ xpt_action_default(union ccb *start_ccb)
 			cam_dpath = NULL;
 			start_ccb->ccb_h.status = CAM_REQ_CMP;
 		}
-#else /* !CAMDEBUG */
-		start_ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
-#endif /* CAMDEBUG */
 		break;
 	}
 	case XPT_FREEZE_QUEUE:
@@ -4749,9 +4739,7 @@ xpt_config(void *arg)
 	 * Now that interrupts are enabled, go find our devices
 	 */
 
-#ifdef CAMDEBUG
-	/* Setup debugging flags and path */
-#ifdef CAM_DEBUG_BUS
+	/* Setup debugging path */
 	if (cam_dflags != CAM_DEBUG_NONE) {
 		/*
 		 * Locking is specifically omitted here.  No SIMs have
@@ -4768,10 +4756,6 @@ xpt_config(void *arg)
 		}
 	} else
 		cam_dpath = NULL;
-#else /* !CAM_DEBUG_BUS */
-	cam_dpath = NULL;
-#endif /* CAM_DEBUG_BUS */
-#endif /* CAMDEBUG */
 
 	periphdriver_init(1);
 	xpt_hold_boot();

Modified: stable/9/sys/cam/cam_xpt.h
==============================================================================
--- stable/9/sys/cam/cam_xpt.h	Wed Jun 20 14:29:01 2012	(r237316)
+++ stable/9/sys/cam/cam_xpt.h	Wed Jun 20 14:36:09 2012	(r237317)
@@ -63,28 +63,6 @@ struct async_node {
 SLIST_HEAD(async_list, async_node);
 SLIST_HEAD(periph_list, cam_periph);
 
-#if defined(CAM_DEBUG_FLAGS) && !defined(CAMDEBUG)
-#error "You must have options CAMDEBUG to use options CAM_DEBUG_FLAGS"
-#endif
-
-/*
- * In order to enable the CAM_DEBUG_* options, the user must have CAMDEBUG
- * enabled.  Also, the user must have either none, or all of CAM_DEBUG_BUS,
- * CAM_DEBUG_TARGET, and CAM_DEBUG_LUN specified.
- */
-#if defined(CAM_DEBUG_BUS) || defined(CAM_DEBUG_TARGET) \
-    || defined(CAM_DEBUG_LUN)
-#ifdef CAMDEBUG
-#if !defined(CAM_DEBUG_BUS) || !defined(CAM_DEBUG_TARGET) \
-    || !defined(CAM_DEBUG_LUN)
-#error "You must define all or none of CAM_DEBUG_BUS, CAM_DEBUG_TARGET \
-        and CAM_DEBUG_LUN"
-#endif /* !CAM_DEBUG_BUS || !CAM_DEBUG_TARGET || !CAM_DEBUG_LUN */
-#else /* !CAMDEBUG */
-#error "You must use options CAMDEBUG if you use the CAM_DEBUG_* options"
-#endif /* CAMDEBUG */
-#endif /* CAM_DEBUG_BUS || CAM_DEBUG_TARGET || CAM_DEBUG_LUN */
-
 void			xpt_action(union ccb *new_ccb);
 void			xpt_action_default(union ccb *new_ccb);
 union ccb		*xpt_alloc_ccb(void);

Modified: stable/9/sys/cam/scsi/scsi_sa.c
==============================================================================
--- stable/9/sys/cam/scsi/scsi_sa.c	Wed Jun 20 14:29:01 2012	(r237316)
+++ stable/9/sys/cam/scsi/scsi_sa.c	Wed Jun 20 14:36:09 2012	(r237317)
@@ -1482,10 +1482,6 @@ saregister(struct cam_periph *periph, vo
 		softc->quirks = ((struct sa_quirk_entry *)match)->quirks;
 		softc->last_media_blksize =
 		    ((struct sa_quirk_entry *)match)->prefblk;
-#ifdef	CAMDEBUG
-		xpt_print(periph->path, "found quirk entry %d\n",
-		    (int) (((struct sa_quirk_entry *) match) - sa_quirk_table));
-#endif
 	} else
 		softc->quirks = SA_QUIRK_NONE;
 
@@ -1798,13 +1794,11 @@ sadone(struct cam_periph *periph, union 
 		 */
 		if (error || (softc->flags & SA_FLAG_ERR_PENDING))
 			cam_release_devq(done_ccb->ccb_h.path, 0, 0, 0, 0);
-#ifdef	CAMDEBUG
 		if (error || bp->bio_resid) {
 			CAM_DEBUG(periph->path, CAM_DEBUG_INFO,
 			    	  ("error %d resid %ld count %ld\n", error,
 				  bp->bio_resid, bp->bio_bcount));
 		}
-#endif
 		biofinish(bp, softc->device_stats, 0);
 		break;
 	}

Modified: stable/9/sys/cam/scsi/scsi_target.c
==============================================================================
--- stable/9/sys/cam/scsi/scsi_target.c	Wed Jun 20 14:29:01 2012	(r237316)
+++ stable/9/sys/cam/scsi/scsi_target.c	Wed Jun 20 14:36:09 2012	(r237317)
@@ -305,7 +305,6 @@ targioctl(struct cdev *dev, u_long cmd, 
 		break;
 	case TARGIOCDEBUG:
 	{
-#ifdef	CAMDEBUG
 		struct ccb_debug cdbg;
 
 		/* If no periph available, disallow debugging changes */
@@ -326,9 +325,6 @@ targioctl(struct cdev *dev, u_long cmd, 
 		xpt_action((union ccb *)&cdbg);
 		cam_periph_unlock(softc->periph);
 		status = cdbg.ccb_h.status & CAM_STATUS_MASK;
-#else
-		status = CAM_FUNC_NOTAVAIL;
-#endif
 		break;
 	}
 	default:

Modified: stable/9/sys/conf/NOTES
==============================================================================
--- stable/9/sys/conf/NOTES	Wed Jun 20 14:29:01 2012	(r237316)
+++ stable/9/sys/conf/NOTES	Wed Jun 20 14:36:09 2012	(r237317)
@@ -1291,14 +1291,13 @@ device		ctl		#CAM Target Layer
 
 # CAM OPTIONS:
 # debugging options:
-# -- NOTE --  If you specify one of the bus/target/lun options, you must
-#             specify them all!
-# CAMDEBUG: When defined enables debugging macros
-# CAM_DEBUG_BUS:  Debug the given bus.  Use -1 to debug all busses.
-# CAM_DEBUG_TARGET:  Debug the given target.  Use -1 to debug all targets.
-# CAM_DEBUG_LUN:  Debug the given lun.  Use -1 to debug all luns.
-# CAM_DEBUG_FLAGS:  OR together CAM_DEBUG_INFO, CAM_DEBUG_TRACE,
-#                   CAM_DEBUG_SUBTRACE, and CAM_DEBUG_CDB
+# CAMDEBUG		Compile in all possible debugging.
+# CAM_DEBUG_COMPILE	Debug levels to compile in.
+# CAM_DEBUG_FLAGS	Debug levels to enable on boot.
+# CAM_DEBUG_BUS		Limit debugging to the given bus.
+# CAM_DEBUG_TARGET	Limit debugging to the given target.
+# CAM_DEBUG_LUN		Limit debugging to the given lun.
+# CAM_DEBUG_DELAY	Delay in us after printing each debug line.
 #
 # CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds
 # SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions
@@ -1309,10 +1308,12 @@ device		ctl		#CAM Target Layer
 #             can be changed at boot and runtime with the
 #             kern.cam.scsi_delay tunable/sysctl.
 options 	CAMDEBUG
+options 	CAM_DEBUG_COMPILE=-1
+options 	CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_PROBE|CAM_DEBUG_PERIPH)
 options 	CAM_DEBUG_BUS=-1
 options 	CAM_DEBUG_TARGET=-1
 options 	CAM_DEBUG_LUN=-1
-options 	CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB)
+options 	CAM_DEBUG_DELAY=1
 options 	CAM_MAX_HIGHPOWER=4
 options 	SCSI_NO_SENSE_STRINGS
 options 	SCSI_NO_OP_STRINGS

Modified: stable/9/sys/conf/options
==============================================================================
--- stable/9/sys/conf/options	Wed Jun 20 14:29:01 2012	(r237316)
+++ stable/9/sys/conf/options	Wed Jun 20 14:36:09 2012	(r237317)
@@ -302,6 +302,7 @@ MAXSSIZ		opt_param.h
 # Generic SCSI options.
 CAM_MAX_HIGHPOWER	opt_cam.h
 CAMDEBUG		opt_cam.h
+CAM_DEBUG_COMPILE	opt_cam.h
 CAM_DEBUG_DELAY		opt_cam.h
 CAM_DEBUG_BUS		opt_cam.h
 CAM_DEBUG_TARGET	opt_cam.h


More information about the svn-src-stable-9 mailing list