svn commit: r198917 - stable/7/sys/dev/fxp
Pyun YongHyeon
yongari at FreeBSD.org
Wed Nov 4 18:20:32 UTC 2009
Author: yongari
Date: Wed Nov 4 18:20:31 2009
New Revision: 198917
URL: http://svn.freebsd.org/changeset/base/198917
Log:
MFC r194573:
Overhaul fxp(4) multicast filter programming. fxp(4) hardwares do
not allow multicast filter programming when controller is busy to
send/receive frames. So it used to mark need_mcsetup bit and defer
multicast filter programming until controller becomes idle state.
To detect when the controller is idle fxp(4) relied on Tx
completion interrupt with NOP command and fxp_start_body and
fxp_intr_body had to see whether pending multicast filter
programming was requested. This resulted in very complex logic and
sometimes it did not work as expected.
Since the controller should be in idle state before any multicast
filter modifications I changed it to reinitialize the controller
whenever multicast filter programming is required. This is the same
way what OpenBSD and NetBSD does. Also I added IFF_DRV_RUNNING
check in ioctl handler so controller would be reinitialized only if
it is absolutely needed.
With this change I guess we can remove fxp(4) DELAY hack in ifioctl
for IPv6 case.
Modified:
stable/7/sys/dev/fxp/if_fxp.c
stable/7/sys/dev/fxp/if_fxpvar.h
Directory Properties:
stable/7/sys/ (props changed)
stable/7/sys/contrib/pf/ (props changed)
Modified: stable/7/sys/dev/fxp/if_fxp.c
==============================================================================
--- stable/7/sys/dev/fxp/if_fxp.c Wed Nov 4 18:18:09 2009 (r198916)
+++ stable/7/sys/dev/fxp/if_fxp.c Wed Nov 4 18:20:31 2009 (r198917)
@@ -1311,14 +1311,6 @@ fxp_start_body(struct ifnet *ifp)
FXP_LOCK_ASSERT(sc, MA_OWNED);
- /*
- * See if we need to suspend xmit until the multicast filter
- * has been reprogrammed (which can only be done at the head
- * of the command chain).
- */
- if (sc->need_mcsetup)
- return;
-
if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
IFF_DRV_RUNNING)
return;
@@ -1762,11 +1754,8 @@ fxp_txeof(struct fxp_softc *sc)
sc->fxp_desc.tx_first = txp;
bus_dmamap_sync(sc->cbl_tag, sc->cbl_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
- if (sc->tx_queued == 0) {
+ if (sc->tx_queued == 0)
sc->watchdog_timer = 0;
- if (sc->need_mcsetup)
- fxp_mc_setup(sc);
- }
}
static void
@@ -2071,7 +2060,8 @@ fxp_tick(void *xsc)
if (sc->rx_idle_secs > FXP_MAX_RX_IDLE) {
sc->rx_idle_secs = 0;
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
- fxp_mc_setup(sc);
+ fxp_init_body(sc);
+ return;
}
/*
* If there is no pending command, start another stats
@@ -2213,7 +2203,6 @@ fxp_init_body(struct fxp_softc *sc)
struct fxp_cb_ias *cb_ias;
struct fxp_cb_tx *tcbp;
struct fxp_tx *txp;
- struct fxp_cb_mcs *mcsp;
int i, prm;
FXP_LOCK_ASSERT(sc, MA_OWNED);
@@ -2256,25 +2245,10 @@ fxp_init_body(struct fxp_softc *sc)
fxp_load_ucode(sc);
/*
- * Initialize the multicast address list.
+ * Set IFF_ALLMULTI status. It's needed in configure action
+ * command.
*/
- if (fxp_mc_addrs(sc)) {
- mcsp = sc->mcsp;
- mcsp->cb_status = 0;
- mcsp->cb_command =
- htole16(FXP_CB_COMMAND_MCAS | FXP_CB_COMMAND_EL);
- mcsp->link_addr = 0xffffffff;
- /*
- * Start the multicast setup command.
- */
- fxp_scb_wait(sc);
- bus_dmamap_sync(sc->mcs_tag, sc->mcs_map,
- BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
- CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->mcs_addr);
- fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START);
- /* ...and wait for it to complete. */
- fxp_dma_wait(sc, &mcsp->cb_status, sc->mcs_tag, sc->mcs_map);
- }
+ fxp_mc_addrs(sc);
/*
* We temporarily use memory that contains the TxCB list to
@@ -2348,7 +2322,7 @@ fxp_init_body(struct fxp_softc *sc)
cbp->force_fdx = 0; /* (don't) force full duplex */
cbp->fdx_pin_en = 1; /* (enable) FDX# pin */
cbp->multi_ia = 0; /* (don't) accept multiple IAs */
- cbp->mc_all = sc->flags & FXP_FLAG_ALL_MCAST ? 1 : 0;
+ cbp->mc_all = ifp->if_flags & IFF_ALLMULTI ? 1 : 0;
cbp->gamla_rx = sc->flags & FXP_FLAG_EXT_RFA ? 1 : 0;
cbp->vlan_strip_en = ((sc->flags & FXP_FLAG_EXT_RFA) != 0 &&
(ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0) ? 1 : 0;
@@ -2404,11 +2378,17 @@ fxp_init_body(struct fxp_softc *sc)
fxp_scb_wait(sc);
bus_dmamap_sync(sc->cbl_tag, sc->cbl_map,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+ CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->fxp_desc.cbl_addr);
fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START);
/* ...and wait for it to complete. */
fxp_dma_wait(sc, &cb_ias->cb_status, sc->cbl_tag, sc->cbl_map);
/*
+ * Initialize the multicast address list.
+ */
+ fxp_mc_setup(sc);
+
+ /*
* Initialize transmit control block (TxCB) list.
*/
txp = sc->fxp_desc.tx_list;
@@ -2439,6 +2419,7 @@ fxp_init_body(struct fxp_softc *sc)
sc->tx_queued = 1;
fxp_scb_wait(sc);
+ CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->fxp_desc.cbl_addr);
fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START);
/*
@@ -2718,11 +2699,6 @@ fxp_ioctl(struct ifnet *ifp, u_long comm
switch (command) {
case SIOCSIFFLAGS:
FXP_LOCK(sc);
- if (ifp->if_flags & IFF_ALLMULTI)
- sc->flags |= FXP_FLAG_ALL_MCAST;
- else
- sc->flags &= ~FXP_FLAG_ALL_MCAST;
-
/*
* If interface is marked up and not running, then start it.
* If it is marked down and running, stop it.
@@ -2730,35 +2706,24 @@ fxp_ioctl(struct ifnet *ifp, u_long comm
* such as IFF_PROMISC are handled.
*/
if (ifp->if_flags & IFF_UP) {
- fxp_init_body(sc);
+ if (((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) &&
+ ((ifp->if_flags ^ sc->if_flags) &
+ (IFF_PROMISC | IFF_ALLMULTI | IFF_LINK0)) != 0)
+ fxp_init_body(sc);
+ else if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
+ fxp_init_body(sc);
} else {
- if (ifp->if_drv_flags & IFF_DRV_RUNNING)
+ if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
fxp_stop(sc);
}
+ sc->if_flags = ifp->if_flags;
FXP_UNLOCK(sc);
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
- FXP_LOCK(sc);
- if (ifp->if_flags & IFF_ALLMULTI)
- sc->flags |= FXP_FLAG_ALL_MCAST;
- else
- sc->flags &= ~FXP_FLAG_ALL_MCAST;
- /*
- * Multicast list has changed; set the hardware filter
- * accordingly.
- */
- if ((sc->flags & FXP_FLAG_ALL_MCAST) == 0)
- fxp_mc_setup(sc);
- /*
- * fxp_mc_setup() can set FXP_FLAG_ALL_MCAST, so check it
- * again rather than else {}.
- */
- if (sc->flags & FXP_FLAG_ALL_MCAST)
- fxp_init_body(sc);
- FXP_UNLOCK(sc);
- error = 0;
+ if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
+ fxp_init(sc);
break;
case SIOCSIFMEDIA:
@@ -2862,13 +2827,13 @@ fxp_mc_addrs(struct fxp_softc *sc)
int nmcasts;
nmcasts = 0;
- if ((sc->flags & FXP_FLAG_ALL_MCAST) == 0) {
+ if ((ifp->if_flags & IFF_ALLMULTI) == 0) {
IF_ADDR_LOCK(ifp);
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
if (nmcasts >= MAXMCADDR) {
- sc->flags |= FXP_FLAG_ALL_MCAST;
+ ifp->if_flags |= IFF_ALLMULTI;
nmcasts = 0;
break;
}
@@ -2893,87 +2858,28 @@ fxp_mc_addrs(struct fxp_softc *sc)
* points to the TxCB ring, but the mcsetup descriptor itself is not part
* of it. We then can do 'CU_START' on the mcsetup descriptor and have it
* lead into the regular TxCB ring when it completes.
- *
- * This function must be called at splimp.
*/
static void
fxp_mc_setup(struct fxp_softc *sc)
{
- struct fxp_cb_mcs *mcsp = sc->mcsp;
- struct fxp_tx *txp;
+ struct fxp_cb_mcs *mcsp;
int count;
FXP_LOCK_ASSERT(sc, MA_OWNED);
- /*
- * If there are queued commands, we must wait until they are all
- * completed. If we are already waiting, then add a NOP command
- * with interrupt option so that we're notified when all commands
- * have been completed - fxp_start() ensures that no additional
- * TX commands will be added when need_mcsetup is true.
- */
- if (sc->tx_queued) {
- /*
- * need_mcsetup will be true if we are already waiting for the
- * NOP command to be completed (see below). In this case, bail.
- */
- if (sc->need_mcsetup)
- return;
- sc->need_mcsetup = 1;
-
- /*
- * Add a NOP command with interrupt so that we are notified
- * when all TX commands have been processed.
- */
- txp = sc->fxp_desc.tx_last->tx_next;
- txp->tx_mbuf = NULL;
- txp->tx_cb->cb_status = 0;
- txp->tx_cb->cb_command = htole16(FXP_CB_COMMAND_NOP |
- FXP_CB_COMMAND_S | FXP_CB_COMMAND_I);
- /*
- * Advance the end of list forward.
- */
- sc->fxp_desc.tx_last->tx_cb->cb_command &=
- htole16(~FXP_CB_COMMAND_S);
- bus_dmamap_sync(sc->cbl_tag, sc->cbl_map, BUS_DMASYNC_PREWRITE);
- sc->fxp_desc.tx_last = txp;
- sc->tx_queued++;
- /*
- * Issue a resume in case the CU has just suspended.
- */
- fxp_scb_wait(sc);
- fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_RESUME);
- /*
- * Set a 5 second timer just in case we don't hear from the
- * card again.
- */
- sc->watchdog_timer = 5;
-
- return;
- }
- sc->need_mcsetup = 0;
- /*
- * Initialize multicast setup descriptor.
- */
+ mcsp = sc->mcsp;
mcsp->cb_status = 0;
- mcsp->cb_command = htole16(FXP_CB_COMMAND_MCAS |
- FXP_CB_COMMAND_S | FXP_CB_COMMAND_I);
- mcsp->link_addr = htole32(sc->fxp_desc.cbl_addr);
- txp = &sc->fxp_desc.mcs_tx;
- txp->tx_mbuf = NULL;
- txp->tx_cb = (struct fxp_cb_tx *)sc->mcsp;
- txp->tx_next = sc->fxp_desc.tx_list;
- (void) fxp_mc_addrs(sc);
- sc->fxp_desc.tx_first = sc->fxp_desc.tx_last = txp;
- sc->tx_queued = 1;
+ mcsp->cb_command = htole16(FXP_CB_COMMAND_MCAS | FXP_CB_COMMAND_EL);
+ mcsp->link_addr = 0xffffffff;
+ fxp_mc_addrs(sc);
/*
- * Wait until command unit is not active. This should never
- * be the case when nothing is queued, but make sure anyway.
+ * Wait until command unit is idle. This should never be the
+ * case when nothing is queued, but make sure anyway.
*/
count = 100;
- while ((CSR_READ_1(sc, FXP_CSR_SCB_RUSCUS) >> 6) ==
- FXP_SCB_CUS_ACTIVE && --count)
+ while ((CSR_READ_1(sc, FXP_CSR_SCB_RUSCUS) >> 6) !=
+ FXP_SCB_CUS_IDLE && --count)
DELAY(10);
if (count == 0) {
device_printf(sc->dev, "command queue timeout\n");
@@ -2988,9 +2894,8 @@ fxp_mc_setup(struct fxp_softc *sc)
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
CSR_WRITE_4(sc, FXP_CSR_SCB_GENERAL, sc->mcs_addr);
fxp_scb_cmd(sc, FXP_SCB_COMMAND_CU_START);
-
- sc->watchdog_timer = 2;
- return;
+ /* ...and wait for it to complete. */
+ fxp_dma_wait(sc, &mcsp->cb_status, sc->mcs_tag, sc->mcs_map);
}
static uint32_t fxp_ucode_d101a[] = D101_A_RCVBUNDLE_UCODE;
Modified: stable/7/sys/dev/fxp/if_fxpvar.h
==============================================================================
--- stable/7/sys/dev/fxp/if_fxpvar.h Wed Nov 4 18:18:09 2009 (r198916)
+++ stable/7/sys/dev/fxp/if_fxpvar.h Wed Nov 4 18:20:31 2009 (r198917)
@@ -165,7 +165,6 @@ struct fxp_softc {
int maxtxseg; /* maximum # of TX segments */
int maxsegsize; /* maximum size of a TX segment */
int tx_queued; /* # of active TxCB's */
- int need_mcsetup; /* multicast filter needs programming */
struct fxp_stats *fxp_stats; /* Pointer to interface stats */
uint32_t stats_addr; /* DMA address of the stats structure */
int rx_idle_secs; /* # of seconds RX has been idle */
@@ -185,6 +184,7 @@ struct fxp_softc {
int cu_resume_bug;
int revision;
int flags;
+ int if_flags;
uint8_t rfa_size;
uint32_t tx_cmd;
};
@@ -195,7 +195,6 @@ struct fxp_softc {
#define FXP_FLAG_EXT_TXCB 0x0008 /* enable use of extended TXCB */
#define FXP_FLAG_SERIAL_MEDIA 0x0010 /* 10Mbps serial interface */
#define FXP_FLAG_LONG_PKT_EN 0x0020 /* enable long packet reception */
-#define FXP_FLAG_ALL_MCAST 0x0040 /* accept all multicast frames */
#define FXP_FLAG_CU_RESUME_BUG 0x0080 /* requires workaround for CU_RESUME */
#define FXP_FLAG_UCODE 0x0100 /* ucode is loaded */
#define FXP_FLAG_DEFERRED_RNR 0x0200 /* DEVICE_POLLING deferred RNR */
More information about the svn-src-stable-7
mailing list