svn commit: r308295 - in head/sys: conf dev/gpio
Oleksandr Tymoshenko
gonzo at FreeBSD.org
Fri Nov 4 16:24:40 UTC 2016
Author: gonzo
Date: Fri Nov 4 16:24:38 2016
New Revision: 308295
URL: https://svnweb.freebsd.org/changeset/base/308295
Log:
[gpio] Add GPIO driver for Intel Bay Trail SoC
Bay Trail has three banks of GPIOs exposed to userland as /dev/gpiocN,
where N is 1, 2, and 3. Pins in each bank are pre-named to match names
on boards schematics: GPIO_S0_SCnn, GPIO_S0_NCnn, and GPIO_S5_nn.
Controller supports edge-triggered and level-triggered interrupts but
current version of the driver does not have interrupts support
Added:
head/sys/dev/gpio/bytgpio.c (contents, props changed)
Modified:
head/sys/conf/files.amd64
head/sys/conf/files.i386
Modified: head/sys/conf/files.amd64
==============================================================================
--- head/sys/conf/files.amd64 Fri Nov 4 15:44:00 2016 (r308294)
+++ head/sys/conf/files.amd64 Fri Nov 4 16:24:38 2016 (r308295)
@@ -270,6 +270,7 @@ dev/fdc/fdc.c optional fdc
dev/fdc/fdc_acpi.c optional fdc
dev/fdc/fdc_isa.c optional fdc isa
dev/fdc/fdc_pccard.c optional fdc pccard
+dev/gpio/bytgpio.c optional bytgpio
dev/hpt27xx/hpt27xx_os_bsd.c optional hpt27xx
dev/hpt27xx/hpt27xx_osm_bsd.c optional hpt27xx
dev/hpt27xx/hpt27xx_config.c optional hpt27xx
Modified: head/sys/conf/files.i386
==============================================================================
--- head/sys/conf/files.i386 Fri Nov 4 15:44:00 2016 (r308294)
+++ head/sys/conf/files.i386 Fri Nov 4 16:24:38 2016 (r308295)
@@ -225,6 +225,7 @@ dev/fe/if_fe_isa.c optional fe isa
dev/glxiic/glxiic.c optional glxiic
dev/glxsb/glxsb.c optional glxsb
dev/glxsb/glxsb_hash.c optional glxsb
+dev/gpio/bytgpio.c optional bytgpio
dev/hpt27xx/hpt27xx_os_bsd.c optional hpt27xx
dev/hpt27xx/hpt27xx_osm_bsd.c optional hpt27xx
dev/hpt27xx/hpt27xx_config.c optional hpt27xx
Added: head/sys/dev/gpio/bytgpio.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/dev/gpio/bytgpio.c Fri Nov 4 16:24:38 2016 (r308295)
@@ -0,0 +1,435 @@
+/*-
+ * Copyright (c) 2016 Oleksandr Tymoshenko <gonzo at FreeBSD.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include "opt_acpi.h"
+
+#include <sys/param.h>
+#include <sys/bus.h>
+#include <sys/gpio.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/proc.h>
+#include <sys/rman.h>
+
+#include <machine/bus.h>
+#include <machine/resource.h>
+
+#include <contrib/dev/acpica/include/acpi.h>
+#include <contrib/dev/acpica/include/accommon.h>
+
+#include <dev/acpica/acpivar.h>
+#include <dev/gpio/gpiobusvar.h>
+
+#include "gpio_if.h"
+
+/**
+ * Macros for driver mutex locking
+ */
+#define BYTGPIO_LOCK(_sc) mtx_lock_spin(&(_sc)->sc_mtx)
+#define BYTGPIO_UNLOCK(_sc) mtx_unlock_spin(&(_sc)->sc_mtx)
+#define BYTGPIO_LOCK_INIT(_sc) \
+ mtx_init(&_sc->sc_mtx, device_get_nameunit((_sc)->sc_dev), \
+ "bytgpio", MTX_SPIN)
+#define BYTGPIO_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->sc_mtx)
+#define BYTGPIO_ASSERT_LOCKED(_sc) mtx_assert(&(_sc)->sc_mtx, MA_OWNED)
+#define BYTGPIO_ASSERT_UNLOCKED(_sc) mtx_assert(&(_sc)->sc_mtx, MA_NOTOWNED)
+
+struct bytgpio_softc {
+ ACPI_HANDLE sc_handle;
+ device_t sc_dev;
+ device_t sc_busdev;
+ struct mtx sc_mtx;
+ int sc_mem_rid;
+ struct resource *sc_mem_res;
+ int sc_npins;
+ const char* sc_bank_prefix;
+ const int *sc_pinpad_map;
+};
+
+static int bytgpio_probe(device_t dev);
+static int bytgpio_attach(device_t dev);
+
+#define SCORE_UID 1
+#define SCORE_BANK_PREFIX "GPIO_S0_SC"
+const int bytgpio_score_pins[] = {
+ 85, 89, 93, 96, 99, 102, 98, 101, 34, 37, 36, 38, 39, 35, 40,
+ 84, 62, 61, 64, 59, 54, 56, 60, 55, 63, 57, 51, 50, 53, 47,
+ 52, 49, 48, 43, 46, 41, 45, 42, 58, 44, 95, 105, 70, 68, 67,
+ 66, 69, 71, 65, 72, 86, 90, 88, 92, 103, 77, 79, 83, 78, 81,
+ 80, 82, 13, 12, 15, 14, 17, 18, 19, 16, 2, 1, 0, 4, 6, 7, 9,
+ 8, 33, 32, 31, 30, 29, 27, 25, 28, 26, 23, 21, 20, 24, 22, 5,
+ 3, 10, 11, 106, 87, 91, 104, 97, 100
+};
+#define SCORE_PINS nitems(bytgpio_score_pins)
+
+#define NCORE_UID 2
+#define NCORE_BANK_PREFIX "GPIO_S0_NC"
+const int bytgpio_ncore_pins[] = {
+ 19, 18, 17, 20, 21, 22, 24, 25, 23, 16, 14, 15, 12, 26, 27,
+ 1, 4, 8, 11, 0, 3, 6, 10, 13, 2, 5, 9, 7
+};
+#define NCORE_PINS nitems(bytgpio_ncore_pins)
+
+#define SUS_UID 3
+#define SUS_BANK_PREFIX "GPIO_S5_"
+const int bytgpio_sus_pins[] = {
+ 29, 33, 30, 31, 32, 34, 36, 35, 38, 37, 18, 7, 11, 20, 17, 1,
+ 8, 10, 19, 12, 0, 2, 23, 39, 28, 27, 22, 21, 24, 25, 26, 51,
+ 56, 54, 49, 55, 48, 57, 50, 58, 52, 53, 59, 40
+};
+#define SUS_PINS nitems(bytgpio_sus_pins)
+
+#define BYGPIO_PIN_REGISTER(sc, pin, reg) ((sc)->sc_pinpad_map[(pin)] * 16 + (reg))
+#define BYTGPIO_PCONF0 0x0000
+#define BYTGPIO_PAD_VAL 0x0008
+#define BYTGPIO_PAD_VAL_LEVEL (1 << 0)
+#define BYTGPIO_PAD_VAL_I_OUTPUT_ENABLED (1 << 1)
+#define BYTGPIO_PAD_VAL_I_INPUT_ENABLED (1 << 2)
+#define BYTGPIO_PAD_VAL_DIR_MASK (3 << 1)
+
+static inline uint32_t
+bytgpio_read_4(struct bytgpio_softc *sc, bus_size_t off)
+{
+ return (bus_read_4(sc->sc_mem_res, off));
+}
+
+static inline void
+bytgpio_write_4(struct bytgpio_softc *sc, bus_size_t off,
+ uint32_t val)
+{
+ bus_write_4(sc->sc_mem_res, off, val);
+}
+
+static device_t
+bytgpio_get_bus(device_t dev)
+{
+ struct bytgpio_softc *sc;
+
+ sc = device_get_softc(dev);
+
+ return (sc->sc_busdev);
+}
+
+static int
+bytgpio_pin_max(device_t dev, int *maxpin)
+{
+ struct bytgpio_softc *sc;
+
+ sc = device_get_softc(dev);
+
+ *maxpin = sc->sc_npins - 1;
+
+ return (0);
+}
+
+static int
+bytgpio_valid_pin(struct bytgpio_softc *sc, int pin)
+{
+
+ if (pin >= sc->sc_npins || sc->sc_mem_res == NULL)
+ return (EINVAL);
+
+ return (0);
+}
+
+static int
+bytgpio_pin_getcaps(device_t dev, uint32_t pin, uint32_t *caps)
+{
+ struct bytgpio_softc *sc;
+
+ sc = device_get_softc(dev);
+ if (bytgpio_valid_pin(sc, pin) != 0)
+ return (EINVAL);
+
+ *caps = GPIO_PIN_INPUT | GPIO_PIN_OUTPUT;
+
+ return (0);
+}
+
+static int
+bytgpio_pin_getflags(device_t dev, uint32_t pin, uint32_t *flags)
+{
+ struct bytgpio_softc *sc;
+ uint32_t reg, val;
+
+ sc = device_get_softc(dev);
+ if (bytgpio_valid_pin(sc, pin) != 0)
+ return (EINVAL);
+
+ /* Get the current pin state */
+ BYTGPIO_LOCK(sc);
+ reg = BYGPIO_PIN_REGISTER(sc, pin, BYTGPIO_PAD_VAL);
+ val = bytgpio_read_4(sc, reg);
+ *flags = 0;
+ if ((val & BYTGPIO_PAD_VAL_I_OUTPUT_ENABLED) == 0)
+ *flags |= GPIO_PIN_OUTPUT;
+ /*
+ * this bit can be cleared to read current output value
+ * sou output bit takes precedense
+ */
+ else if ((val & BYTGPIO_PAD_VAL_I_INPUT_ENABLED) == 0)
+ *flags |= GPIO_PIN_INPUT;
+ BYTGPIO_UNLOCK(sc);
+
+ return (0);
+}
+
+static int
+bytgpio_pin_setflags(device_t dev, uint32_t pin, uint32_t flags)
+{
+ struct bytgpio_softc *sc;
+ uint32_t reg, val;
+ uint32_t allowed;
+
+ sc = device_get_softc(dev);
+ if (bytgpio_valid_pin(sc, pin) != 0)
+ return (EINVAL);
+
+ allowed = GPIO_PIN_INPUT | GPIO_PIN_OUTPUT;
+
+ /*
+ * Only directtion flag allowed
+ */
+ if (flags & ~allowed)
+ return (EINVAL);
+
+ /*
+ * Not both directions simultaneously
+ */
+ if ((flags & allowed) == allowed)
+ return (EINVAL);
+
+ /* Set the GPIO mode and state */
+ BYTGPIO_LOCK(sc);
+ reg = BYGPIO_PIN_REGISTER(sc, pin, BYTGPIO_PAD_VAL);
+ val = bytgpio_read_4(sc, reg);
+ val = val | BYTGPIO_PAD_VAL_DIR_MASK;
+ if (flags & GPIO_PIN_INPUT)
+ val = val & ~BYTGPIO_PAD_VAL_I_INPUT_ENABLED;
+ if (flags & GPIO_PIN_OUTPUT)
+ val = val & ~BYTGPIO_PAD_VAL_I_OUTPUT_ENABLED;
+ bytgpio_write_4(sc, reg, val);
+ BYTGPIO_UNLOCK(sc);
+
+ return (0);
+}
+
+static int
+bytgpio_pin_getname(device_t dev, uint32_t pin, char *name)
+{
+ struct bytgpio_softc *sc;
+
+ sc = device_get_softc(dev);
+ if (bytgpio_valid_pin(sc, pin) != 0)
+ return (EINVAL);
+
+ /* Set a very simple name */
+ snprintf(name, GPIOMAXNAME, "%s%u", sc->sc_bank_prefix, pin);
+ name[GPIOMAXNAME - 1] = '\0';
+
+ return (0);
+}
+
+static int
+bytgpio_pin_set(device_t dev, uint32_t pin, unsigned int value)
+{
+ struct bytgpio_softc *sc;
+ uint32_t reg, val;
+
+ sc = device_get_softc(dev);
+ if (bytgpio_valid_pin(sc, pin) != 0)
+ return (EINVAL);
+
+ BYTGPIO_LOCK(sc);
+ reg = BYGPIO_PIN_REGISTER(sc, pin, BYTGPIO_PAD_VAL);
+ val = bytgpio_read_4(sc, reg);
+ if (value == GPIO_PIN_LOW)
+ val = val & ~BYTGPIO_PAD_VAL_LEVEL;
+ else
+ val = val | BYTGPIO_PAD_VAL_LEVEL;
+ bytgpio_write_4(sc, reg, val);
+ BYTGPIO_UNLOCK(sc);
+
+ return (0);
+}
+
+static int
+bytgpio_pin_get(device_t dev, uint32_t pin, unsigned int *value)
+{
+ struct bytgpio_softc *sc;
+ uint32_t reg, val;
+
+ sc = device_get_softc(dev);
+ if (bytgpio_valid_pin(sc, pin) != 0)
+ return (EINVAL);
+
+ BYTGPIO_LOCK(sc);
+ reg = BYGPIO_PIN_REGISTER(sc, pin, BYTGPIO_PAD_VAL);
+ /*
+ * Enable input to read current value
+ */
+ val = bytgpio_read_4(sc, reg);
+ val = val & ~BYTGPIO_PAD_VAL_I_INPUT_ENABLED;
+ bytgpio_write_4(sc, reg, val);
+ /*
+ * And read actual value
+ */
+ val = bytgpio_read_4(sc, reg);
+ if (val & BYTGPIO_PAD_VAL_LEVEL)
+ *value = GPIO_PIN_HIGH;
+ else
+ *value = GPIO_PIN_LOW;
+ BYTGPIO_UNLOCK(sc);
+
+ return (0);
+}
+
+static int
+bytgpio_pin_toggle(device_t dev, uint32_t pin)
+{
+ struct bytgpio_softc *sc;
+ uint32_t reg, val;
+
+ sc = device_get_softc(dev);
+ if (bytgpio_valid_pin(sc, pin) != 0)
+ return (EINVAL);
+
+ /* Toggle the pin */
+ BYTGPIO_LOCK(sc);
+ reg = BYGPIO_PIN_REGISTER(sc, pin, BYTGPIO_PAD_VAL);
+ val = bytgpio_read_4(sc, reg);
+ val = val ^ BYTGPIO_PAD_VAL_LEVEL;
+ bytgpio_write_4(sc, reg, val);
+ BYTGPIO_UNLOCK(sc);
+
+ return (0);
+}
+
+static int
+bytgpio_probe(device_t dev)
+{
+ static char *gpio_ids[] = { "INT33FC", NULL };
+
+ if (acpi_disabled("gpio") ||
+ ACPI_ID_PROBE(device_get_parent(dev), dev, gpio_ids) == NULL)
+ return (ENXIO);
+
+ device_set_desc(dev, "Intel Baytrail GPIO Controller");
+ return (0);
+}
+
+static int
+bytgpio_attach(device_t dev)
+{
+ struct bytgpio_softc *sc;
+ ACPI_STATUS status;
+ int uid;
+
+ sc = device_get_softc(dev);
+ sc->sc_dev = dev;
+ sc->sc_handle = acpi_get_handle(dev);
+ status = acpi_GetInteger(sc->sc_handle, "_UID", &uid);
+ if (ACPI_FAILURE(status)) {
+ device_printf(dev, "failed to read _UID\n");
+ return (ENXIO);
+ }
+
+ switch (uid) {
+ case SCORE_UID:
+ sc->sc_npins = SCORE_PINS;
+ sc->sc_bank_prefix = SCORE_BANK_PREFIX;
+ sc->sc_pinpad_map = bytgpio_score_pins;
+ break;
+ case NCORE_UID:
+ sc->sc_npins = NCORE_PINS;
+ sc->sc_bank_prefix = NCORE_BANK_PREFIX;
+ sc->sc_pinpad_map = bytgpio_ncore_pins;
+ break;
+ case SUS_UID:
+ sc->sc_npins = SUS_PINS;
+ sc->sc_bank_prefix = SUS_BANK_PREFIX;
+ sc->sc_pinpad_map = bytgpio_sus_pins;
+ break;
+ default:
+ device_printf(dev, "invalid _UID value: %d\n", uid);
+ }
+
+ sc->sc_mem_rid = 0;
+ sc->sc_mem_res = bus_alloc_resource_any(sc->sc_dev,
+ SYS_RES_MEMORY, &sc->sc_mem_rid, RF_ACTIVE);
+ if (sc->sc_mem_res == NULL) {
+ device_printf(dev, "can't allocate resource\n");
+ goto error;
+ }
+
+ BYTGPIO_LOCK_INIT(sc);
+
+ sc->sc_busdev = gpiobus_attach_bus(dev);
+ if (sc->sc_busdev == NULL) {
+ BYTGPIO_LOCK_DESTROY(sc);
+ bus_release_resource(dev, SYS_RES_MEMORY,
+ sc->sc_mem_rid, sc->sc_mem_res);
+ return (ENXIO);
+ }
+
+ return (0);
+
+error:
+ return (ENXIO);
+}
+
+static device_method_t bytgpio_methods[] = {
+ /* Device interface */
+ DEVMETHOD(device_probe, bytgpio_probe),
+ DEVMETHOD(device_attach, bytgpio_attach),
+
+ /* GPIO protocol */
+ DEVMETHOD(gpio_get_bus, bytgpio_get_bus),
+ DEVMETHOD(gpio_pin_max, bytgpio_pin_max),
+ DEVMETHOD(gpio_pin_getname, bytgpio_pin_getname),
+ DEVMETHOD(gpio_pin_getflags, bytgpio_pin_getflags),
+ DEVMETHOD(gpio_pin_getcaps, bytgpio_pin_getcaps),
+ DEVMETHOD(gpio_pin_setflags, bytgpio_pin_setflags),
+ DEVMETHOD(gpio_pin_get, bytgpio_pin_get),
+ DEVMETHOD(gpio_pin_set, bytgpio_pin_set),
+ DEVMETHOD(gpio_pin_toggle, bytgpio_pin_toggle),
+
+ DEVMETHOD_END
+};
+
+static driver_t bytgpio_driver = {
+ "gpio",
+ bytgpio_methods,
+ sizeof(struct bytgpio_softc),
+};
+
+static devclass_t bytgpio_devclass;
+DRIVER_MODULE(bytgpio, acpi, bytgpio_driver, bytgpio_devclass, 0, 0);
+MODULE_DEPEND(bytgpio, acpi, 1, 1, 1);
+MODULE_DEPEND(bytgpio, gpio, 1, 1, 1);
More information about the svn-src-head
mailing list