svn commit: r300715 - in head/sys: conf dev/gpio modules/gpio/gpiospi
Adrian Chadd
adrian at FreeBSD.org
Thu May 26 07:20:34 UTC 2016
Author: adrian
Date: Thu May 26 07:20:33 2016
New Revision: 300715
URL: https://svnweb.freebsd.org/changeset/base/300715
Log:
[gpiospi] add initial gpio SPI bit bang driver.
Submitted by: ray
Obtained from: zrouter
Added:
head/sys/dev/gpio/gpiospi.c (contents, props changed)
head/sys/modules/gpio/gpiospi/
head/sys/modules/gpio/gpiospi/Makefile (contents, props changed)
Modified:
head/sys/conf/files
Modified: head/sys/conf/files
==============================================================================
--- head/sys/conf/files Thu May 26 07:09:42 2016 (r300714)
+++ head/sys/conf/files Thu May 26 07:20:33 2016 (r300715)
@@ -1531,6 +1531,7 @@ dev/gpio/gpioc.c optional gpio \
dependency "gpio_if.h"
dev/gpio/gpioiic.c optional gpioiic
dev/gpio/gpioled.c optional gpioled
+dev/gpio/gpiospi.c optional gpiospi
dev/gpio/gpio_if.m optional gpio
dev/gpio/gpiobus_if.m optional gpio
dev/gpio/ofw_gpiobus.c optional fdt gpio
Added: head/sys/dev/gpio/gpiospi.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/dev/gpio/gpiospi.c Thu May 26 07:20:33 2016 (r300715)
@@ -0,0 +1,402 @@
+/*-
+ * Copyright (c) 2011, Aleksandr Rybalko <ray at dlink.ua>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice unmodified, this list of conditions, and the following
+ * disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include "opt_gpio.h"
+
+#include <sys/param.h>
+#include <sys/systm.h>
+
+#include <sys/bus.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/rman.h>
+#include <sys/sysctl.h>
+
+#include <sys/gpio.h>
+#include "gpiobus_if.h"
+
+#include <dev/gpio/gpiobusvar.h>
+
+#include <dev/spibus/spi.h>
+#include <dev/spibus/spibusvar.h>
+#include "spibus_if.h"
+
+#ifdef GPIO_SPI_DEBUG
+#define dprintf printf
+#else
+#define dprintf(x, arg...)
+#endif /* GPIO_SPI_DEBUG */
+
+struct gpio_spi_softc {
+ device_t sc_dev;
+ device_t sc_busdev;
+ int sc_freq;
+ uint8_t sc_sclk;
+ uint8_t sc_miso;
+ uint8_t sc_mosi;
+ uint8_t sc_cs0;
+ uint8_t sc_cs1;
+ uint8_t sc_cs2;
+ uint8_t sc_cs3;
+};
+
+static void gpio_spi_chip_activate(struct gpio_spi_softc *, int);
+static void gpio_spi_chip_deactivate(struct gpio_spi_softc *, int);
+
+static int
+gpio_spi_probe(device_t dev)
+{
+ device_set_desc(dev, "GPIO SPI bit-banging driver");
+ return (0);
+}
+
+static void
+gpio_delay(struct gpio_spi_softc *sc)
+{
+ int d;
+
+ d = sc->sc_freq / 1000000;
+ if (d == 0)
+ d = 1;
+
+ DELAY(d);
+}
+
+static int
+gpio_spi_attach(device_t dev)
+{
+ uint32_t value;
+ struct gpio_spi_softc *sc;
+
+ sc = device_get_softc(dev);
+ sc->sc_dev = dev;
+ sc->sc_busdev = device_get_parent(dev);
+
+ /* Required variables */
+ if (resource_int_value(device_get_name(dev),
+ device_get_unit(dev), "sclk", &value))
+ return (ENXIO);
+ sc->sc_sclk = value & 0xff;
+
+ if (resource_int_value(device_get_name(dev),
+ device_get_unit(dev), "mosi", &value))
+ return (ENXIO);
+ sc->sc_mosi = value & 0xff;
+
+ /* Handle no miso; we just never read back from the device */
+ if (resource_int_value(device_get_name(dev),
+ device_get_unit(dev), "miso", &value))
+ value = 0xff;
+ sc->sc_miso = value & 0xff;
+
+ if (resource_int_value(device_get_name(dev),
+ device_get_unit(dev), "cs0", &value))
+ return (ENXIO);
+ sc->sc_cs0 = value & 0xff;
+
+ /* Optional variables */
+ if (resource_int_value(device_get_name(dev),
+ device_get_unit(dev), "cs1", &value))
+ value = 0xff;
+ sc->sc_cs1 = value & 0xff;
+
+ if (resource_int_value(device_get_name(dev),
+ device_get_unit(dev), "cs2", &value))
+ value = 0xff;
+ sc->sc_cs2 = value & 0xff;
+
+ if (resource_int_value(device_get_name(dev),
+ device_get_unit(dev), "cs3", &value))
+ value = 0xff;
+ sc->sc_cs3 = value & 0xff;
+
+ /* Default to 100KHz */
+ if (resource_int_value(device_get_name(dev),
+ device_get_unit(dev), "freq", &value)) {
+ value = 100000;
+ }
+ sc->sc_freq = value;
+
+ if (bootverbose) {
+ device_printf(dev, "frequency: %d Hz\n",
+ sc->sc_freq);
+ device_printf(dev,
+ "Use GPIO pins: sclk=%d, mosi=%d, miso=%d, "
+ "cs0=%d, cs1=%d, cs2=%d, cs3=%d\n",
+ sc->sc_sclk, sc->sc_mosi, sc->sc_miso,
+ sc->sc_cs0, sc->sc_cs1, sc->sc_cs2, sc->sc_cs3);
+ }
+
+ /* Set directions */
+ GPIOBUS_PIN_SETFLAGS(sc->sc_busdev, sc->sc_dev, sc->sc_sclk,
+ GPIO_PIN_OUTPUT|GPIO_PIN_PULLDOWN);
+ GPIOBUS_PIN_SETFLAGS(sc->sc_busdev, sc->sc_dev, sc->sc_mosi,
+ GPIO_PIN_OUTPUT|GPIO_PIN_PULLDOWN);
+ if (sc->sc_miso != 0xff) {
+ GPIOBUS_PIN_SETFLAGS(sc->sc_busdev, sc->sc_dev, sc->sc_miso,
+ GPIO_PIN_INPUT|GPIO_PIN_PULLDOWN);
+ }
+
+ GPIOBUS_PIN_SETFLAGS(sc->sc_busdev, sc->sc_dev, sc->sc_cs0,
+ GPIO_PIN_OUTPUT|GPIO_PIN_PULLUP);
+
+ if (sc->sc_cs1 != 0xff)
+ GPIOBUS_PIN_SETFLAGS(sc->sc_busdev, sc->sc_dev, sc->sc_cs1,
+ GPIO_PIN_OUTPUT|GPIO_PIN_PULLUP);
+ if (sc->sc_cs2 != 0xff)
+ GPIOBUS_PIN_SETFLAGS(sc->sc_busdev, sc->sc_dev, sc->sc_cs2,
+ GPIO_PIN_OUTPUT|GPIO_PIN_PULLUP);
+ if (sc->sc_cs3 != 0xff)
+ GPIOBUS_PIN_SETFLAGS(sc->sc_busdev, sc->sc_dev, sc->sc_cs3,
+ GPIO_PIN_OUTPUT|GPIO_PIN_PULLUP);
+
+ gpio_spi_chip_deactivate(sc, -1);
+
+ device_add_child(dev, "spibus", -1);
+ return (bus_generic_attach(dev));
+}
+
+static int
+gpio_spi_detach(device_t dev)
+{
+
+ return (0);
+}
+
+static void
+gpio_spi_chip_activate(struct gpio_spi_softc *sc, int cs)
+{
+
+ /* called with locked gpiobus */
+ switch (cs) {
+ case 0:
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_cs0, 0);
+ break;
+ case 1:
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_cs1, 0);
+ break;
+ case 2:
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_cs2, 0);
+ break;
+ case 3:
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_cs3, 0);
+ break;
+ default:
+ device_printf(sc->sc_dev, "don't have CS%d\n", cs);
+ }
+
+ gpio_delay(sc);
+}
+
+static void
+gpio_spi_chip_deactivate(struct gpio_spi_softc *sc, int cs)
+{
+
+ /* called wth locked gpiobus */
+ /*
+ * Put CSx to high
+ */
+ switch (cs) {
+ case -1:
+ /* All CS */
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_cs0, 1);
+ if (sc->sc_cs1 == 0xff) break;
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_cs1, 1);
+ if (sc->sc_cs2 == 0xff) break;
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_cs2, 1);
+ if (sc->sc_cs3 == 0xff) break;
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_cs3, 1);
+ break;
+ case 0:
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_cs0, 1);
+ break;
+ case 1:
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_cs1, 1);
+ break;
+ case 2:
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_cs2, 1);
+ break;
+ case 3:
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_cs3, 1);
+ break;
+ default:
+ device_printf(sc->sc_dev, "don't have CS%d\n", cs);
+ }
+}
+
+static uint8_t
+gpio_spi_txrx(struct gpio_spi_softc *sc, int cs, int mode, uint8_t data)
+{
+ uint32_t mask, out = 0;
+ unsigned int bit;
+
+
+ /* called with locked gpiobus */
+
+ for (mask = 0x80; mask > 0; mask >>= 1) {
+ if ((mode == SPIBUS_MODE_CPOL) ||
+ (mode == SPIBUS_MODE_CPHA)) {
+ /* If mode 1 or 2 */
+
+ /* first step */
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_mosi, (data & mask)?1:0);
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_sclk, 0);
+ gpio_delay(sc);
+ /* second step */
+ if (sc->sc_miso != 0xff) {
+ GPIOBUS_PIN_GET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_miso, &bit);
+ out |= bit?mask:0;
+ }
+ /* Data captured */
+ gpio_delay(sc);
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_sclk, 1);
+ } else {
+ /* If mode 0 or 3 */
+
+ /* first step */
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_mosi, (data & mask)?1:0);
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_sclk, 1);
+ gpio_delay(sc);
+ /* second step */
+ if (sc->sc_miso != 0xff) {
+ GPIOBUS_PIN_GET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_miso, &bit);
+ out |= bit?mask:0;
+ }
+ /* Data captured */
+ gpio_delay(sc);
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_sclk, 0);
+ }
+ }
+
+ return (out & 0xff);
+}
+
+static int
+gpio_spi_transfer(device_t dev, device_t child, struct spi_command *cmd)
+{
+ struct gpio_spi_softc *sc;
+ uint8_t *buf_in, *buf_out;
+ struct spibus_ivar *devi = SPIBUS_IVAR(child);
+ int i;
+
+ sc = device_get_softc(dev);
+
+ KASSERT(cmd->tx_cmd_sz == cmd->rx_cmd_sz,
+ ("TX/RX command sizes should be equal"));
+ KASSERT(cmd->tx_data_sz == cmd->rx_data_sz,
+ ("TX/RX data sizes should be equal"));
+
+ gpio_spi_chip_activate(sc, devi->cs);
+
+ /* Preset pins */
+ if ((devi->mode == SPIBUS_MODE_CPOL) ||
+ (devi->mode == SPIBUS_MODE_CPHA)) {
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_sclk, 1);
+ } else {
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_sclk, 0);
+ }
+
+ /*
+ * Transfer command
+ */
+ buf_out = (uint8_t *)cmd->tx_cmd;
+ buf_in = (uint8_t *)cmd->rx_cmd;
+
+ for (i = 0; i < cmd->tx_cmd_sz; i++)
+ buf_in[i] = gpio_spi_txrx(sc, devi->cs, devi->mode, buf_out[i]);
+
+ /*
+ * Receive/transmit data (depends on command)
+ */
+ buf_out = (uint8_t *)cmd->tx_data;
+ buf_in = (uint8_t *)cmd->rx_data;
+ for (i = 0; i < cmd->tx_data_sz; i++)
+ buf_in[i] = gpio_spi_txrx(sc, devi->cs, devi->mode, buf_out[i]);
+
+ /* Return pins to mode default */
+ if ((devi->mode == SPIBUS_MODE_CPOL) ||
+ (devi->mode == SPIBUS_MODE_CPHA)) {
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_sclk, 1);
+ } else {
+ GPIOBUS_PIN_SET(sc->sc_busdev, sc->sc_dev,
+ sc->sc_sclk, 0);
+ }
+
+ gpio_spi_chip_deactivate(sc, devi->cs);
+
+ return (0);
+}
+
+static device_method_t gpio_spi_methods[] = {
+ /* Device interface */
+ DEVMETHOD(device_probe, gpio_spi_probe),
+ DEVMETHOD(device_attach, gpio_spi_attach),
+ DEVMETHOD(device_detach, gpio_spi_detach),
+
+ DEVMETHOD(spibus_transfer, gpio_spi_transfer),
+
+ {0, 0}
+};
+
+static driver_t gpio_spi_driver = {
+ "gpiospi",
+ gpio_spi_methods,
+ sizeof(struct gpio_spi_softc),
+};
+
+static devclass_t gpio_spi_devclass;
+
+DRIVER_MODULE(gpiospi, gpiobus, gpio_spi_driver, gpio_spi_devclass, 0, 0);
+DRIVER_MODULE(spibus, gpiospi, spibus_driver, spibus_devclass, 0, 0);
+MODULE_DEPEND(spi, gpiospi, 1, 1, 1);
+MODULE_DEPEND(gpiobus, gpiospi, 1, 1, 1);
Added: head/sys/modules/gpio/gpiospi/Makefile
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/modules/gpio/gpiospi/Makefile Thu May 26 07:20:33 2016 (r300715)
@@ -0,0 +1,41 @@
+#
+# Copyright (c) 2016 Adrian Chadd <adrian at FreeBSD.org>.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer,
+# without modification.
+# 2. Redistributions in binary form must reproduce at minimum a disclaimer
+# similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
+# redistribution must be conditioned upon including a substantially
+# similar Disclaimer requirement for further binary redistribution.
+#
+# NO WARRANTY
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
+# AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+# THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
+# OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+# THE POSSIBILITY OF SUCH DAMAGES.
+#
+# $FreeBSD$
+#
+
+.PATH: ${.CURDIR}/../../../dev/gpio/
+
+KMOD= gpiospi
+SRCS= gpiospi.c
+SRCS+= device_if.h bus_if.h gpio_if.h gpiobus_if.h spibus_if.h
+SRCS+= opt_gpio.h
+
+CFLAGS+= -I. -I${.CURDIR}/../../../dev/gpio/
+
+.include <bsd.kmod.mk>
More information about the svn-src-head
mailing list