svn commit: r280906 - head/sys/boot/fdt/dts/arm
Ganbold Tsagaankhuu
ganbold at FreeBSD.org
Tue Mar 31 11:55:58 UTC 2015
Author: ganbold
Date: Tue Mar 31 11:55:56 2015
New Revision: 280906
URL: https://svnweb.freebsd.org/changeset/base/280906
Log:
Add device tree files for Hardkernel Odroid-C1 and Visson ATV-102 devices.
Submitted by: John Wehle
Approved by: stas (mentor)
Added:
head/sys/boot/fdt/dts/arm/odroidc1.dts (contents, props changed)
head/sys/boot/fdt/dts/arm/vsatv102-m6.dts (contents, props changed)
Added: head/sys/boot/fdt/dts/arm/odroidc1.dts
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/boot/fdt/dts/arm/odroidc1.dts Tue Mar 31 11:55:56 2015 (r280906)
@@ -0,0 +1,497 @@
+/*-
+ * Copyright (c) 2015 John Wehle <john at feith.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+
+/*
+ * The ordering of certain devices is significant (e.g. usb depends on
+ * usb-phy which depends on gpio, also the timer should appear early on
+ * to provide a reasonably accurate DELAY implementation).
+ *
+ * Both usb-phys devices must be configured to prevent the usb controller
+ * from hanging during initialization.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x7900000 0x00600000; /* 6MB frame buffer */
+
+/ {
+ model = "hardkernel,odroid-c1";
+ compatible = "hardkernel,odroid-c1", "amlogic,s805";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ aliases {
+ soc = &soc;
+ screen = &screen;
+ uart0 = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <0x0>;
+ };
+
+ cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <0x1>;
+ };
+
+ cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <0x2>;
+ };
+
+ cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a5";
+ reg = <0x3>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB RAM */
+ };
+
+ soc: soc at c0000000 {
+ device_type = "soc";
+ compatible = "simple-bus";
+ bus-frequency = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x0 0xc0000000 0x1a100000>;
+
+ gic: gic at 4301000 {
+ device_type = "interrupt-controller";
+ compatible = "arm,gic";
+ reg = <0x4301000 0x1000>, // distributer registers
+ <0x4300100 0x0100>; // CPU if registers
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ scu: scu at 4300000 {
+ compatible = "arm,cortex-a5-scu";
+ reg = <0x4300000 0x1000>;
+ };
+
+ cpuconfig: cpuconfig at 1901ff80 {
+ compatible = "amlogic,aml8726-cpuconfig";
+ reg = <0x1901ff80 16>;
+ };
+
+ pl310 at 4200000 {
+ compatible = "arm,pl310";
+ reg = <0x4200000 0x1000>;
+ interrupts = <61>;
+ interrupt-parent = <&gic>;
+ };
+
+ ccm at 1104140 {
+ compatible = "amlogic,aml8726-ccm";
+ reg = <0x1104140 20>; /* cbus 0x1050 */
+
+ functions = "ethernet", "i2c", "rng", "sdio", "sdxc",
+ "uart-a", "uart-b", "uart-c",
+ "usb-a", "usb-b";
+ };
+
+ pinctrl at 11080b0 {
+ compatible = "amlogic,aml8726-pinctrl";
+ reg = <0x11080b0 40>, /* mux */
+ <0x11080e8 24>, /* pu/pd */
+ <0x1108120 24>, /* pull enable */
+ <0x8100014 4>, /* ao mux */
+ <0x810002c 4>, /* ao pu/pd */
+ <0x810002c 4>; /* ao pull enable */
+
+ /*
+ * Currently only pin muxing that deviates
+ * from the power on default of gpio is
+ * specified here.
+ */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uartao &pins_ethernet &pins_hdmi>;
+
+ pins_ethernet: ethernet {
+ amlogic,pins = "ref_clk",
+ "tx_clk", "tx_en",
+ "tx_d0", "tx_d1",
+ "tx_d2", "tx_d3",
+ "rx_clk", "rx_dv",
+ "rx_d0", "rx_d1",
+ "rx_d2", "rx_d3",
+ "mdc", "mdio";
+ amlogic,function = "ethernet";
+ };
+
+ pins_hdmi: hdmi {
+ amlogic,pins = "cec", "hpd",
+ "scl", "sda";
+ amlogic,function = "hdmi";
+ };
+
+ pins_sdio_b: sdio_b {
+ amlogic,pins = "clk", "cmd",
+ "d0", "d1",
+ "d2", "d3";
+ amlogic,function = "sdio-b";
+ amlogic,pull = "up";
+ };
+
+ pins_sdxc_b: sdxc_b {
+ amlogic,pins = "clk", "cmd",
+ "d0", "d1",
+ "d2", "d3";
+ amlogic,function = "sdxc-b";
+ amlogic,pull = "up";
+ };
+
+ pins_sdio_c: sdio_c {
+ amlogic,pins = "clk", "cmd",
+ "d0", "d1",
+ "d2", "d3";
+ amlogic,function = "sdio-c";
+ amlogic,pull = "up";
+ };
+
+ pins_sdxc_c: sdxc_c {
+ amlogic,pins = "clk", "cmd",
+ "d0", "d1",
+ "d2", "d3",
+ "d4", "d5",
+ "d6", "d7";
+ amlogic,function = "sdxc-c";
+ amlogic,pull = "up";
+ };
+
+ pins_i2c_a: i2c_a {
+ amlogic,pins = "scl", "sda";
+ amlogic,function = "i2c-a";
+ };
+
+ pins_i2c_b: i2c_b {
+ amlogic,pins = "scl", "sda";
+ amlogic,function = "i2c-b";
+ };
+
+ pins_uarta: uarta {
+ amlogic,pins = "tx", "rx", "cts", "rts";
+ amlogic,function = "uart-a";
+ };
+
+ pins_uartb: uartb {
+
+ /*
+ * gpiox18 appears to have special
+ * meaning to the bootloader making
+ * hardware handshaking unavailable.
+ */
+
+ amlogic,pins = "tx", "rx";
+ amlogic,function = "uart-b";
+ };
+
+ pins_uartc: uartc {
+ amlogic,pins = "tx", "rx", "cts", "rts";
+ amlogic,function = "uart-c";
+ };
+
+ pins_uartao: uartao {
+ amlogic,pins = "tx", "rx";
+ amlogic,function = "uart-ao";
+ };
+ };
+
+ watchdog at 1109900 {
+ compatible = "amlogic,aml8726-wdt";
+ reg = <0x1109900 8>; /* cbus 0x2640 */
+ interrupts = <0>;
+ interrupt-parent = <&gic>;
+ };
+
+ timer at 1109940 {
+ compatible = "amlogic,aml8726-timer";
+ reg = <0x1109940 24>; /* cbus 0x2650 */
+ interrupts = <10 11 6 29>;
+ interrupt-parent = <&gic>;
+ };
+
+ rtc at 8100740 {
+ compatible = "amlogic,aml8726-rtc";
+ reg = <0x8100740 20>; /* aobus 0x1d0 */
+ interrupts = <72>;
+ interrupt-parent = <&gic>;
+
+ init-always = "false";
+ xo-init = <0x180a>;
+ gpo-init = <0x500000>;
+ };
+
+ clkmsr: clkmsr at 1108758 {
+ compatible = "amlogic,aml8726-clkmsr";
+ reg = <0x1108758 16>; /* cbus 0x21d6 */
+ };
+
+ uart0: uart at 81004c0 {
+ /* uart-ao */
+ device_type = "serial";
+ compatible = "amlogic,aml8726-uart";
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg = <0x81004c0 20>; /* aobus 0x130 */
+ interrupts = <90>;
+ interrupt-parent = <&gic>;
+ };
+
+ gpioao: gpio at 8100024 {
+ /* gpio unit 7 */
+ compatible = "amlogic,aml8726-gpio";
+ reg = <0x8100024 4>, /* oen aobus 0x9 */
+ <0x8100024 4>, /* out */
+ <0x8100028 4>; /* in */
+
+ gpio-controller;
+ #gpio-cells = <1>;
+ pin-count = <14>;
+ };
+
+ gpio3: gpio at 1108054 {
+ compatible = "amlogic,aml8726-gpio";
+ reg = <0x1108054 4>, /* oen cbus 0x2015 */
+ <0x1108058 4>, /* out */
+ <0x110805c 4>; /* in */
+
+ gpio-controller;
+ #gpio-cells = <1>;
+ pin-count = <32>;
+ };
+
+ gpio5: gpio at 110806c {
+ compatible = "amlogic,aml8726-gpio";
+ reg = <0x110806c 4>, /* oen cbus 0x201b */
+ <0x1108070 4>, /* out */
+ <0x1108074 4>; /* in */
+
+ gpio-controller;
+ #gpio-cells = <1>;
+ pin-count = <32>;
+ };
+
+ mmc at 1108c20 {
+ compatible = "amlogic,aml8726-mmc";
+ reg = <0x1108c20 32>; /* cbus 0x2308 */
+ interrupts = <28>;
+ interrupt-parent = <&gic>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_sdio_b>;
+
+ /*
+ * Ordering is significant.
+ *
+ * mmc-vselect low sets first voltage
+ * mmc-vselect high sets second voltage
+ *
+ * If mmc-vselect is not present, then
+ * only one voltage should be specified.
+ */
+ mmc-voltages = "3.3", "1.8";
+ mmc-vselect = <&gpioao 3>; /* gpioao_3 */
+
+ mmc-pwr-en = <&gpio5 31 0>; /* card_8 */
+ ins-detect = <&gpio5 29 0>; /* card_6 */
+ };
+
+ sdxc at 1108e00 {
+ compatible = "amlogic,aml8726-sdxc-m8";
+ clock-frequency = <1275000000>;
+ reg = <0x1108e00 60>; /* cbus 0x2380 */
+ interrupts = <78>;
+ interrupt-parent = <&gic>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_sdxc_c>;
+
+ mmc-voltages = "1.8";
+
+ mmc-rst = <&gpio3 9 0>; /* boot_9 emmc-rst */
+ };
+
+ rng at 1108100 {
+ compatible = "amlogic,aml8726-rng";
+ reg = <0x1108100 8>; /* cbus 0x2040 */
+ };
+
+ i2c at 1108500 {
+ /* i2c-a */
+ compatible = "amlogic,aml8726-i2c";
+ reg = <0x1108500 32>; /* cbus 0x2140 */
+ interrupts = <21>;
+ interrupt-parent = <&gic>;
+ };
+
+ i2c at 11087c0 {
+ /* i2c-b */
+ compatible = "amlogic,aml8726-i2c";
+ reg = <0x11087c0 32>; /* cbus 0x21f0 */
+ interrupts = <128>;
+ interrupt-parent = <&gic>;
+ };
+
+ uart at 11084c0 {
+ /* uart-a */
+ device_type = "serial";
+ compatible = "amlogic,aml8726-uart";
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg = <0x11084c0 20>; /* cbus 0x2130 */
+ interrupts = <26>;
+ interrupt-parent = <&gic>;
+ };
+
+ uart at 11084dc {
+ /* uart-b */
+ device_type = "serial";
+ compatible = "amlogic,aml8726-uart";
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg = <0x11084dc 20>; /* cbus 0x2137 */
+ interrupts = <75>;
+ interrupt-parent = <&gic>;
+ };
+
+ uart at 1108700 {
+ /* uart-c */
+ device_type = "serial";
+ compatible = "amlogic,aml8726-uart";
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg = <0x1108700 20>; /* cbus 0x21c0 */
+ interrupts = <93>;
+ interrupt-parent = <&gic>;
+ };
+
+ usb-phy at 1108800 {
+ /* usb-a phy */
+ compatible = "amlogic,aml8726-m8-usb-phy";
+ reg = <0x1108800 32>; /* cbus 0x2200 */
+
+ usb-pwr-en = <&gpioao 5 1>; /* gpioao_5 vbus */
+ };
+
+ usb-phy at 1108820 {
+ /* usb-b phy */
+ compatible = "amlogic,aml8726-m8-usb-phy";
+ reg = <0x1108820 32>; /* cbus 0x2208 */
+
+ force-aca = "true";
+ usb-hub-rst = <&gpioao 4 0>; /* gpioao_4 hub-rst */
+ };
+
+ usb at 9040000 {
+ /* usb-a */
+ compatible = "synopsys,designware-hs-otg2";
+ reg = <0x9040000 0x40000>; /* ahbbus 0x40000*/
+ interrupts = <30>;
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dr_mode = "host";
+ };
+
+ usb at 90c0000 {
+ /* usb-b */
+ compatible = "synopsys,designware-hs-otg2";
+ reg = <0x90c0000 0x40000>; /* ahbbus 0xc0000 */
+ interrupts = <31>;
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dr_mode = "host";
+ };
+
+ eth at 9410000 {
+ /* ethernet */
+ compatible = "snps,dwmac";
+ reg = <0x9410000 0x2000>; /* ahbbus 0x410000 */
+ interrupts = <8>;
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth-phy-rst = <&gpio3 23 0>; /* gpioh_4 phy-rst */
+ };
+
+ screen: fb at 8006020 {
+ device_type = "display";
+ compatible = "amlogic,aml8726-fb";
+ reg = <0x8006048 12>, /* CANVAS */
+ <0x1106800 1024>, /* VIU */
+ <0x1107400 1024>; /* VPP */
+ interrupts = <2 3 12 13>;
+ interrupt-parent = <&gic>;
+
+ address = <0x7900000>; /* match memreserve */
+ width = <720>;
+ height = <480>;
+ depth = <24>;
+ linebytes = <2160>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ sys_led {
+ gpios = <&gpioao 13>; /* gpioao_13 sys_led */
+ label = "sys_led";
+ };
+ };
+
+ chosen {
+ stdin = "uart0";
+ stdout = "uart0";
+ };
+};
Added: head/sys/boot/fdt/dts/arm/vsatv102-m6.dts
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/boot/fdt/dts/arm/vsatv102-m6.dts Tue Mar 31 11:55:56 2015 (r280906)
@@ -0,0 +1,412 @@
+/*-
+ * Copyright (c) 2013-2015 John Wehle <john at feith.com>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+
+/*
+ * The ordering of certain devices is significant (e.g. usb depends on
+ * usb-phy which depends on gpio, also the timer should appear early on
+ * to provide a reasonably accurate DELAY implementation).
+ *
+ * Both usb-phys devices must be configured to prevent the usb controller
+ * from hanging during initialization.
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x84900000 0x00600000; /* 6MB frame buffer */
+
+/ {
+ /*
+ * My development unit visually appears to be a Visson ATV-102
+ * and the specs for both my unit and the Visson ATV-102 say
+ * the SoC is an aml8726-m3. However the uboot prompt says
+ * m6_mbx_v1, the RTC is located on SECBUS2 instead of AOBUS,
+ * and there are two cores so it seems my unit is a newer
+ * version using the later processor.
+ */
+
+ model = "visson,atv-102";
+ compatible = "visson,atv-102", "amlogic,aml8726-m6";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ interrupt-parent = <&gic>;
+
+ aliases {
+ soc = &soc;
+ screen = &screen;
+ uart0 = &uart0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x0>;
+ };
+
+ cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x1>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>; /* 1GB RAM */
+ };
+
+ soc: soc at c0000000 {
+ device_type = "soc";
+ compatible = "simple-bus";
+ bus-frequency = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges = <0x0 0xc0000000 0x1a100000>;
+
+ pic: pic at 1109a40 {
+ device_type = "interrupt-controller";
+ compatible = "amlogic,aml8726-pic";
+ reg = <0x1109a40 128>; /* cbus 0x2690 */
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gic: gic at 4301000 {
+ device_type = "interrupt-controller";
+ compatible = "arm,gic";
+ reg = <0x4301000 0x1000>, /* distributer registers */
+ <0x4300100 0x0100>; /* CPU if registers */
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ scu: scu at 4300000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x4300000 0x1000>;
+ };
+
+ cpuconfig: cpuconfig at 1901ff80 {
+ compatible = "amlogic,aml8726-cpuconfig";
+ reg = <0x1901ff80 8>;
+ };
+
+ pl310 at 4200000 {
+ compatible = "arm,pl310";
+ reg = <0x4200000 0x1000>;
+ interrupts = <61>; /* AM_IRQ1(29) */
+ interrupt-parent = <&gic>;
+ };
+
+ ccm at 1104140 {
+ compatible = "amlogic,aml8726-ccm";
+ reg = <0x1104140 20>; /* cbus 0x1050 */
+
+ functions = "ethernet", "i2c", "rng", "sdio",
+ "uart-a", "uart-b", "uart-c",
+ "usb-a", "usb-b";
+ };
+
+ pinctrl: pinctrl at 11080b0 {
+ compatible = "amlogic,aml8726-pinctrl";
+ reg = <0x11080b0 40>, /* mux */
+ <0x11080e8 24>, /* pu/pd */
+ <0x11080e8 24>, /* pull enable */
+ <0x8100014 4>, /* ao mux */
+ <0x810002c 4>, /* ao pu/pd */
+ <0x810002c 4>; /* ao pull enable */
+
+ /*
+ * Currently only pin muxing that deviates
+ * from the power on default of gpio is
+ * specified here.
+ */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uartao &pins_ethernet &pins_hdmi>;
+
+ pins_ethernet: ethernet {
+ amlogic,pins = "ref_clk_in",
+ "tx_clk", "tx_en",
+ "tx_d0", "tx_d1",
+ "tx_d2", "tx_d3",
+ "rx_clk", "rx_dv",
+ "rx_d0", "rx_d1",
+ "rx_d2", "rx_d3",
+ "mdc", "mdio";
+ amlogic,function = "ethernet";
+ };
+
+ pins_hdmi: hdmi {
+ amlogic,pins = "cec", "hpd",
+ "scl", "sda";
+ amlogic,function = "hdmi";
+ };
+
+ pins_sdio_b: sdio_b {
+ amlogic,pins = "clk", "cmd",
+ "d0", "d1",
+ "d2", "d3";
+ amlogic,function = "sdio-b";
+ };
+
+ pins_uartao: uartao {
+ amlogic,pins = "tx", "rx";
+ amlogic,function = "uart-ao";
+ };
+ };
+
+ watchdog at 1109900 {
+ compatible = "amlogic,aml8726-wdt";
+ reg = <0x1109900 8>; /* cbus 0x2640 */
+ interrupts = <0>; /* AM_IRQ0(0) */
+ interrupt-parent = <&gic>;
+ };
+
+ timer at 1109940 {
+ compatible = "amlogic,aml8726-timer";
+ reg = <0x1109940 24>; /* cbus 0x2650 */
+ interrupts = <10 /* AM_IRQ0(10) */
+ 11 /* AM_IRQ0(11) */
+ 6 /* AM_IRQ0(6) */
+ 29>; /* AM_IRQ0(29) */
+ interrupt-parent = <&gic>;
+ };
+
+ rtc at 1a004340 {
+ compatible = "amlogic,aml8726-rtc";
+ reg = <0x1a004340 20>; /* secbus2 0xd0 */
+ interrupts = <72>; /* AM_IRQ2(8) */
+ interrupt-parent = <&gic>;
+
+ init-always = "false";
+ xo-init = <0x180a>;
+ gpo-init = <0x500000>;
+ };
+
+ clkmsr: clkmsr at 1108758 {
+ compatible = "amlogic,aml8726-clkmsr";
+ reg = <0x1108758 16>; /* cbus 0x21d6 */
+ };
+
+ uart0: uart at 81004c0 {
+ /* uart-ao */
+ device_type = "serial";
+ compatible = "amlogic,aml8726-uart";
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg = <0x81004c0 20>; /* aobus 0x130 */
+ interrupts = <90>; /* AM_IRQ2(26) */
+ interrupt-parent = <&gic>;
+ };
+
+ gpioao: gpio at 8100024 {
+ /* gpio unit 7 */
+ compatible = "amlogic,aml8726-gpio";
+ reg = <0x8100024 4>, /* oen aobus 0x9 */
+ <0x8100024 4>, /* out */
+ <0x8100028 4>; /* in */
+
+ gpio-controller;
+ #gpio-cells = <1>;
+ pin-count = <12>;
+ };
+
+ gpio5: gpio at 110806c {
+ compatible = "amlogic,aml8726-gpio";
+ reg = <0x110806c 4>, /* oen cbus 0x201b */
+ <0x1108070 4>, /* out */
+ <0x1108074 4>; /* in */
+
+ gpio-controller;
+ #gpio-cells = <1>;
+ pin-count = <32>;
+ };
+
+ gpio6: gpio at 1108020 {
+ compatible = "amlogic,aml8726-gpio";
+ reg = <0x1108020 4>, /* oen cbus 0x2008 */
+ <0x1108024 4>, /* out */
+ <0x1108028 4>; /* in */
+
+ gpio-controller;
+ #gpio-cells = <1>;
+ pin-count = <29>;
+ };
+
+ mmc at 1108c20 {
+ compatible = "amlogic,aml8726-mmc";
+ reg = <0x1108c20 32>; /* cbus 0x2308 */
+ interrupts = <28>; /* AM_IRQ0(28) */
+ interrupt-parent = <&gic>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_sdio_b>;
+
+ mmc-voltages = "3.3";
+
+ mmc-pwr-en = <&gpio5 31 0>; /* card_8 */
+ ins-detect = <&gpio5 29 0>; /* card_6 */
+ };
+
+ rng at 1108100 {
+ compatible = "amlogic,aml8726-rng";
+ reg = <0x1108100 8>; /* cbus 0x2040 */
+ };
+
+ i2c at 1108500 {
+ /* i2c-a */
+ compatible = "amlogic,aml8726-i2c";
+ reg = <0x1108500 32>; /* cbus 0x2140 */
+ interrupts = <21>;
+ interrupt-parent = <&gic>;
+ };
+
+ i2c at 11087c0 {
+ /* i2c-b */
+ compatible = "amlogic,aml8726-i2c";
+ reg = <0x11087c0 32>; /* cbus 0x21f0 */
+ interrupts = <128>;
+ interrupt-parent = <&gic>;
+ };
+
+ uart at 11084c0 {
+ /* uart-a */
+ device_type = "serial";
+ compatible = "amlogic,aml8726-uart";
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg = <0x11084c0 20>; /* cbus 0x2130 */
+ interrupts = <26>;
+ interrupt-parent = <&gic>;
+ };
+
+ uart at 11084dc {
+ /* uart-b */
+ device_type = "serial";
+ compatible = "amlogic,aml8726-uart";
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg = <0x11084dc 20>; /* cbus 0x2137 */
+ interrupts = <75>;
+ interrupt-parent = <&gic>;
+ };
+
+ uart at 1108700 {
+ /* uart-c */
+ device_type = "serial";
+ compatible = "amlogic,aml8726-uart";
+ clock-frequency = <0>;
+ current-speed = <115200>;
+ reg = <0x1108700 20>; /* cbus 0x21c0 */
+ interrupts = <93>;
+ interrupt-parent = <&gic>;
+ };
+
+ usb-phy at 1108400 {
+ /* usb-a phy */
+ compatible = "amlogic,aml8726-m6-usb-phy";
+ reg = <0x1108400 32>; /* cbus 0x2100 */
+ };
+
+ usb-phy at 1108420 {
+ /* usb-b phy */
+ compatible = "amlogic,aml8726-m6-usb-phy";
+ reg = <0x1108420 32>; /* cbus 0x2108 */
+
+ usb-pwr-en = <&gpioao 3 1>, /* gpioao_3 vbus */
+ <&gpio6 11 0>; /* gpioe_11 wifi */
+ };
+
+ usb at 9040000 {
+ /* usb-a */
+ compatible = "synopsys,designware-hs-otg2";
+ reg = <0x9040000 0x40000>; /* ahbbus 0x40000*/
+ interrupts = <30>; /* AM_IRQ0(30) */
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ usb at 90c0000 {
+ /* usb-b */
+ compatible = "synopsys,designware-hs-otg2";
+ reg = <0x90c0000 0x40000>; /* ahbbus 0xc0000 */
+ interrupts = <31>; /* AM_IRQ0(31) */
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dr_mode = "host";
+ };
+
+ eth at 9410000 {
+ /* ethernet */
+ compatible = "snps,dwmac";
+ reg = <0x9410000 0x2000>; /* ahbbus 0x410000 */
+ interrupts = <8>; /* AM_IRQ0(8) */
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eth-phy-rst = <&gpio5 15 0>; /* gpioy_15 phy-rst */
+ };
+
+ screen: fb at 8006324 {
+ device_type = "display";
+ compatible = "amlogic,aml8726-fb";
+ reg = <0x8006324 12>, /* CANVAS */
+ <0x1106800 1024>, /* VIU */
+ <0x1107400 1024>; /* VPP */
+ interrupts = <2 /* AM_IRQ0(2) */
+ 3 /* AM_IRQ0(3) */
+ 12 /* AM_IRQ0(12) */
+ 13>; /* AM_IRQ0(13) */
+ interrupt-parent = <&gic>;
+
+ address = <0x84900000>; /* match memreserve */
+ width = <720>;
+ height = <480>;
+ depth = <24>;
+ linebytes = <2160>;
+ };
+ };
+
+ chosen {
+ stdin = "uart0";
+ stdout = "uart0";
+ };
+};
More information about the svn-src-head
mailing list