svn commit: r286477 - in head/sys: arm64/cavium conf
Zbigniew Bodek
zbb at FreeBSD.org
Sat Aug 8 21:32:04 UTC 2015
Author: zbb
Date: Sat Aug 8 21:32:03 2015
New Revision: 286477
URL: https://svnweb.freebsd.org/changeset/base/286477
Log:
Add support for external PCIe (PEM) on Cavium's ThunderX
Reviewed by: jhb
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3257
Added:
head/sys/arm64/cavium/thunder_pcie_pem.c (contents, props changed)
Modified:
head/sys/conf/files.arm64
Added: head/sys/arm64/cavium/thunder_pcie_pem.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/arm64/cavium/thunder_pcie_pem.c Sat Aug 8 21:32:03 2015 (r286477)
@@ -0,0 +1,637 @@
+/*-
+ * Copyright (c) 2015 The FreeBSD Foundation
+ * All rights reserved.
+ *
+ * This software was developed by Semihalf under
+ * the sponsorship of the FreeBSD Foundation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/* PCIe external MAC root complex driver (PEM) for Cavium Thunder SOC */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/bus.h>
+#include <sys/kernel.h>
+#include <sys/malloc.h>
+#include <sys/module.h>
+#include <sys/rman.h>
+#include <sys/endian.h>
+
+#include <dev/pci/pcivar.h>
+#include <dev/pci/pcireg.h>
+
+#include <machine/bus.h>
+#include <machine/resource.h>
+#include <machine/smp.h>
+#include <machine/intr.h>
+
+#include "thunder_pcie_common.h"
+#include "pcib_if.h"
+
+#define THUNDER_PEM_DEVICE_ID 0xa020
+#define THUNDER_PEM_VENDOR_ID 0x177d
+#define THUNDER_PEM_DESC "ThunderX PEM"
+
+/* ThunderX specific defines */
+#define THUNDER_PEMn_REG_BASE(unit) (0x87e0c0000000UL | ((unit) << 24))
+#define PCIERC_CFG002 0x08
+#define PCIERC_CFG006 0x18
+#define PCIERC_CFG032 0x80
+#define PCIERC_CFG006_SEC_BUS(reg) (((reg) >> 8) & 0xFF)
+#define PEM_CFG_RD_REG_ALIGN(reg) ((reg) & ~0x3)
+#define PEM_CFG_RD_REG_DATA(val) (((val) >> 32) & 0xFFFFFFFF)
+#define PEM_CFG_RD 0x30
+#define PEM_CFG_LINK_MASK 0x3
+#define PEM_CFG_LINK_RDY 0x3
+#define PEM_CFG_SLIX_TO_REG(slix) ((slix) << 4)
+#define SBNUM_OFFSET 0x8
+#define SBNUM_MASK 0xFF
+#define PEM_ON_REG 0x420
+#define PEM_CTL_STATUS 0x0
+#define PEM_LINK_ENABLE (1 << 4)
+#define PEM_LINK_DLLA (1 << 29)
+#define PEM_LINK_LT (1 << 27)
+#define PEM_BUS_SHIFT (24)
+#define PEM_SLOT_SHIFT (19)
+#define PEM_FUNC_SHIFT (16)
+#define SLIX_S2M_REGX_ACC 0x874001000000UL
+#define SLIX_S2M_REGX_ACC_SIZE 0x1000
+#define SLIX_S2M_REGX_ACC_SPACING 0x001000000000UL
+#define SLI_BASE 0x880000000000UL
+#define SLI_WINDOW_SPACING 0x004000000000UL
+#define SLI_WINDOW_SIZE 0x0000FF000000UL
+#define SLI_PCI_OFFSET 0x001000000000UL
+#define SLI_NODE_SHIFT (44)
+#define SLI_NODE_MASK (3)
+#define SLI_GROUP_SHIFT (40)
+#define SLI_ID_SHIFT (24)
+#define SLI_ID_MASK (7)
+#define SLI_PEMS_PER_GROUP (3)
+#define SLI_GROUPS_PER_NODE (2)
+#define SLI_PEMS_PER_NODE (SLI_PEMS_PER_GROUP * SLI_GROUPS_PER_NODE)
+#define SLI_ACC_REG_CNT (256)
+
+/*
+ * Each PEM device creates its own bus with
+ * own address translation, so we can adjust bus addresses
+ * as we want. To support 32-bit cards let's assume
+ * PCI window assignment looks as following:
+ *
+ * 0x00000000 - 0x000FFFFF IO
+ * 0x00100000 - 0xFFFFFFFF Memory
+ */
+#define PCI_IO_BASE 0x00000000UL
+#define PCI_IO_SIZE 0x00100000UL
+#define PCI_MEMORY_BASE PCI_IO_SIZE
+#define PCI_MEMORY_SIZE 0xFFF00000UL
+
+struct thunder_pem_softc {
+ device_t dev;
+ struct resource *reg;
+ bus_space_tag_t reg_bst;
+ bus_space_handle_t reg_bsh;
+ struct pcie_range ranges[MAX_RANGES_TUPLES];
+ struct rman mem_rman;
+ struct rman io_rman;
+ bus_space_handle_t pem_sli_base;
+ uint32_t node;
+ uint32_t id;
+ uint32_t sli;
+ uint32_t sli_group;
+ uint64_t sli_window_base;
+};
+
+static struct resource * thunder_pem_alloc_resource(device_t, device_t, int,
+ int *, u_long, u_long, u_long, u_int);
+static int thunder_pem_attach(device_t);
+static int thunder_pem_detach(device_t);
+static uint64_t thunder_pem_config_reg_read(struct thunder_pem_softc *, int);
+static int thunder_pem_link_init(struct thunder_pem_softc *);
+static int thunder_pem_maxslots(device_t);
+static int thunder_pem_probe(device_t);
+static uint32_t thunder_pem_read_config(device_t, u_int, u_int, u_int, u_int,
+ int);
+static int thunder_pem_read_ivar(device_t, device_t, int, uintptr_t *);
+static void thunder_pem_release_all(device_t);
+static int thunder_pem_release_resource(device_t, device_t, int, int,
+ struct resource *);
+static void thunder_pem_slix_s2m_regx_acc_modify(struct thunder_pem_softc *,
+ int, int);
+static void thunder_pem_write_config(device_t, u_int, u_int, u_int, u_int,
+ uint32_t, int);
+static int thunder_pem_write_ivar(device_t, device_t, int, uintptr_t);
+
+/* Global handlers for SLI interface */
+static bus_space_handle_t sli0_s2m_regx_base = 0;
+static bus_space_handle_t sli1_s2m_regx_base = 0;
+
+static device_method_t thunder_pem_methods[] = {
+ /* Device interface */
+ DEVMETHOD(device_probe, thunder_pem_probe),
+ DEVMETHOD(device_attach, thunder_pem_attach),
+ DEVMETHOD(device_detach, thunder_pem_detach),
+ DEVMETHOD(pcib_maxslots, thunder_pem_maxslots),
+ DEVMETHOD(pcib_read_config, thunder_pem_read_config),
+ DEVMETHOD(pcib_write_config, thunder_pem_write_config),
+ DEVMETHOD(bus_read_ivar, thunder_pem_read_ivar),
+ DEVMETHOD(bus_write_ivar, thunder_pem_write_ivar),
+ DEVMETHOD(bus_alloc_resource, thunder_pem_alloc_resource),
+ DEVMETHOD(bus_release_resource, thunder_pem_release_resource),
+ DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
+ DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
+ DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
+ DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
+ DEVMETHOD(pcib_map_msi, thunder_common_map_msi),
+ DEVMETHOD(pcib_alloc_msix, thunder_common_alloc_msix),
+ DEVMETHOD(pcib_release_msix, thunder_common_release_msix),
+ DEVMETHOD(pcib_alloc_msi, thunder_common_alloc_msi),
+ DEVMETHOD(pcib_release_msi, thunder_common_release_msi),
+ DEVMETHOD_END
+};
+
+static driver_t thunder_pem_driver = {
+ "pcib",
+ thunder_pem_methods,
+ sizeof(struct thunder_pem_softc),
+};
+
+static int
+thunder_pem_maxslots(device_t dev)
+{
+
+ /* max slots per bus acc. to standard */
+ return (PCI_SLOTMAX);
+}
+
+static int
+thunder_pem_read_ivar(device_t dev, device_t child, int index,
+ uintptr_t *result)
+{
+ struct thunder_pem_softc *sc;
+ int secondary_bus = 0;
+
+ sc = device_get_softc(dev);
+
+ if (index == PCIB_IVAR_BUS) {
+ secondary_bus = thunder_pem_config_reg_read(sc, PCIERC_CFG006);
+ *result = PCIERC_CFG006_SEC_BUS(secondary_bus);
+ return (0);
+ }
+ if (index == PCIB_IVAR_DOMAIN) {
+ *result = sc->id;
+ return (0);
+ }
+
+ return (ENOENT);
+}
+
+static int
+thunder_pem_write_ivar(device_t dev, device_t child, int index,
+ uintptr_t value)
+{
+
+ return (ENOENT);
+}
+
+static int
+thunder_pem_identify(device_t dev)
+{
+ struct thunder_pem_softc *sc;
+ u_long start;
+
+ sc = device_get_softc(dev);
+ start = rman_get_start(sc->reg);
+
+ /* Calculate PEM designations from its address */
+ sc->node = (start >> SLI_NODE_SHIFT) & SLI_NODE_MASK;
+ sc->id = ((start >> SLI_ID_SHIFT) & SLI_ID_MASK) +
+ (SLI_PEMS_PER_NODE * sc->node);
+ sc->sli = sc->id % SLI_PEMS_PER_GROUP;
+ sc->sli_group = (sc->id / SLI_PEMS_PER_GROUP) % SLI_GROUPS_PER_NODE;
+ sc->sli_window_base = SLI_BASE |
+ (((uint64_t)sc->node) << SLI_NODE_SHIFT) |
+ ((uint64_t)sc->sli_group << SLI_GROUP_SHIFT);
+ sc->sli_window_base += SLI_WINDOW_SPACING * sc->sli;
+
+ return (0);
+}
+
+static void
+thunder_pem_slix_s2m_regx_acc_modify(struct thunder_pem_softc *sc,
+ int sli_group, int slix)
+{
+ uint64_t regval;
+ bus_space_handle_t handle = 0;
+
+ KASSERT(slix >= 0 && slix <= SLI_ACC_REG_CNT, ("Invalid SLI index"));
+
+ if (sli_group == 0)
+ handle = sli0_s2m_regx_base;
+ else if (sli_group == 1)
+ handle = sli1_s2m_regx_base;
+ else
+ device_printf(sc->dev, "SLI group is not correct\n");
+
+ if (handle) {
+ /* Clear lower 32-bits of the SLIx register */
+ regval = bus_space_read_8(sc->reg_bst, handle,
+ PEM_CFG_SLIX_TO_REG(slix));
+ regval &= ~(0xFFFFFFFFUL);
+ bus_space_write_8(sc->reg_bst, handle,
+ PEM_CFG_SLIX_TO_REG(slix), regval);
+ }
+}
+
+static int
+thunder_pem_link_init(struct thunder_pem_softc *sc)
+{
+ uint64_t regval;
+
+ /* check whether PEM is safe to access. */
+ regval = bus_space_read_8(sc->reg_bst, sc->reg_bsh, PEM_ON_REG);
+ if ((regval & PEM_CFG_LINK_MASK) != PEM_CFG_LINK_RDY) {
+ device_printf(sc->dev, "PEM%d is not ON\n", sc->id);
+ return (ENXIO);
+ }
+
+ regval = bus_space_read_8(sc->reg_bst, sc->reg_bsh, PEM_CTL_STATUS);
+ regval |= PEM_LINK_ENABLE;
+ bus_space_write_8(sc->reg_bst, sc->reg_bsh, PEM_CTL_STATUS, regval);
+
+ /* Wait 1ms as per Cavium specification */
+ DELAY(1000);
+
+ regval = thunder_pem_config_reg_read(sc, PCIERC_CFG032);
+
+ if (((regval & PEM_LINK_DLLA) == 0) || ((regval & PEM_LINK_LT) != 0)) {
+ device_printf(sc->dev, "PCIe RC: Port %d Link Timeout\n",
+ sc->id);
+ return (ENXIO);
+ }
+
+ return (0);
+}
+
+static int
+thunder_pem_init(struct thunder_pem_softc *sc)
+{
+ int i, retval = 0;
+
+ retval = thunder_pem_link_init(sc);
+ if (retval) {
+ device_printf(sc->dev, "%s failed\n", __func__);
+ return retval;
+ }
+
+ retval = bus_space_map(sc->reg_bst, sc->sli_window_base,
+ SLI_WINDOW_SIZE, 0, &sc->pem_sli_base);
+ if (retval) {
+ device_printf(sc->dev,
+ "Unable to map RC%d pem_addr base address", sc->id);
+ return (ENOMEM);
+ }
+
+ /* To support 32-bit PCIe devices, set S2M_REGx_ACC[BA]=0x0 */
+ for (i = 0; i < SLI_ACC_REG_CNT; i++) {
+ thunder_pem_slix_s2m_regx_acc_modify(sc, sc->sli_group, i);
+ }
+
+ return (retval);
+}
+
+static uint64_t
+thunder_pem_config_reg_read(struct thunder_pem_softc *sc, int reg)
+{
+ uint64_t data;
+
+ /* Write to ADDR register */
+ bus_space_write_8(sc->reg_bst, sc->reg_bsh, PEM_CFG_RD,
+ PEM_CFG_RD_REG_ALIGN(reg));
+ bus_space_barrier(sc->reg_bst, sc->reg_bsh, PEM_CFG_RD, 8,
+ BUS_SPACE_BARRIER_READ | BUS_SPACE_BARRIER_WRITE);
+ /* Read from DATA register */
+ data = PEM_CFG_RD_REG_DATA(bus_space_read_8(sc->reg_bst, sc->reg_bsh,
+ PEM_CFG_RD));
+
+ return (data);
+}
+
+static uint32_t
+thunder_pem_read_config(device_t dev, u_int bus, u_int slot,
+ u_int func, u_int reg, int bytes)
+{
+ uint64_t offset;
+ uint32_t data;
+ struct thunder_pem_softc *sc;
+ bus_space_tag_t t;
+ bus_space_handle_t h;
+
+ if ((bus > PCI_BUSMAX) || (slot > PCI_SLOTMAX) ||
+ (func > PCI_FUNCMAX) || (reg > PCIE_REGMAX))
+ return (~0U);
+
+ sc = device_get_softc(dev);
+
+ /* Calculate offset */
+ offset = (bus << PEM_BUS_SHIFT) | (slot << PEM_SLOT_SHIFT) |
+ (func << PEM_FUNC_SHIFT) | reg;
+ t = sc->reg_bst;
+ h = sc->pem_sli_base;
+
+ switch (bytes) {
+ case 1:
+ data = bus_space_read_1(t, h, offset);
+ break;
+ case 2:
+ data = le16toh(bus_space_read_2(t, h, offset));
+ break;
+ case 4:
+ data = le32toh(bus_space_read_4(t, h, offset));
+ break;
+ default:
+ return (~0U);
+ }
+
+ return (data);
+}
+
+static void
+thunder_pem_write_config(device_t dev, u_int bus, u_int slot,
+ u_int func, u_int reg, uint32_t val, int bytes)
+{
+ uint64_t offset;
+ struct thunder_pem_softc *sc;
+ bus_space_tag_t t;
+ bus_space_handle_t h;
+
+ if ((bus > PCI_BUSMAX) || (slot > PCI_SLOTMAX) ||
+ (func > PCI_FUNCMAX) || (reg > PCIE_REGMAX))
+ return;
+
+ sc = device_get_softc(dev);
+
+ /* Calculate offset */
+ offset = (bus << PEM_BUS_SHIFT) | (slot << PEM_SLOT_SHIFT) |
+ (func << PEM_FUNC_SHIFT) | reg;
+ t = sc->reg_bst;
+ h = sc->pem_sli_base;
+
+ switch (bytes) {
+ case 1:
+ bus_space_write_1(t, h, offset, val);
+ break;
+ case 2:
+ bus_space_write_2(t, h, offset, htole16(val));
+ break;
+ case 4:
+ bus_space_write_4(t, h, offset, htole32(val));
+ break;
+ default:
+ return;
+ }
+}
+
+static struct resource *
+thunder_pem_alloc_resource(device_t dev, device_t child, int type, int *rid,
+ u_long start, u_long end, u_long count, u_int flags)
+{
+ struct thunder_pem_softc *sc = device_get_softc(dev);
+ struct rman *rm = NULL;
+ struct resource *res;
+ device_t parent_dev;
+
+ switch (type) {
+ case SYS_RES_IOPORT:
+ rm = &sc->io_rman;
+ break;
+ case SYS_RES_MEMORY:
+ rm = &sc->mem_rman;
+ break;
+ default:
+ /* Find parent device. On ThunderX we know an exact path. */
+ parent_dev = device_get_parent(device_get_parent(dev));
+ return (BUS_ALLOC_RESOURCE(parent_dev, dev, type, rid, start,
+ end, count, flags));
+ };
+
+ if ((start == 0UL) && (end == ~0UL)) {
+ device_printf(dev,
+ "Cannot allocate resource with unspecified range\n");
+ goto fail;
+ }
+
+ /* Translate PCI address to host PHYS */
+ if (range_addr_is_pci(sc->ranges, start, count) == 0)
+ goto fail;
+ start = range_addr_pci_to_phys(sc->ranges, start);
+ end = start + count - 1;
+
+ if (bootverbose) {
+ device_printf(dev,
+ "rman_reserve_resource: start=%#lx, end=%#lx, count=%#lx\n",
+ start, end, count);
+ }
+
+ res = rman_reserve_resource(rm, start, end, count, flags, child);
+ if (res == NULL)
+ goto fail;
+
+ rman_set_rid(res, *rid);
+
+ if (flags & RF_ACTIVE)
+ if (bus_activate_resource(child, type, *rid, res)) {
+ rman_release_resource(res);
+ goto fail;
+ }
+
+ return (res);
+
+fail:
+ if (bootverbose) {
+ device_printf(dev, "%s FAIL: type=%d, rid=%d, "
+ "start=%016lx, end=%016lx, count=%016lx, flags=%x\n",
+ __func__, type, *rid, start, end, count, flags);
+ }
+
+ return (NULL);
+}
+
+static int
+thunder_pem_release_resource(device_t dev, device_t child, int type, int rid,
+ struct resource *res)
+{
+ device_t parent_dev;
+
+ /* Find parent device. On ThunderX we know an exact path. */
+ parent_dev = device_get_parent(device_get_parent(dev));
+
+ if ((type != SYS_RES_MEMORY) && (type != SYS_RES_IOPORT))
+ return (BUS_RELEASE_RESOURCE(parent_dev, child,
+ type, rid, res));
+
+ return (rman_release_resource(res));
+}
+
+static int
+thunder_pem_probe(device_t dev)
+{
+ uint16_t pci_vendor_id;
+ uint16_t pci_device_id;
+
+ pci_vendor_id = pci_get_vendor(dev);
+ pci_device_id = pci_get_device(dev);
+
+ if ((pci_vendor_id == THUNDER_PEM_VENDOR_ID) &&
+ (pci_device_id == THUNDER_PEM_DEVICE_ID)) {
+ device_set_desc_copy(dev, THUNDER_PEM_DESC);
+ return (0);
+ }
+
+ return (ENXIO);
+}
+
+static int
+thunder_pem_attach(device_t dev)
+{
+ struct thunder_pem_softc *sc;
+ int error;
+ int rid;
+
+ sc = device_get_softc(dev);
+ sc->dev = dev;
+
+ /* Allocate memory for BAR(0) */
+ rid = PCIR_BAR(0);
+ sc->reg = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
+ &rid, RF_ACTIVE);
+ if (sc->reg == NULL) {
+ device_printf(dev, "Failed to allocate resource\n");
+ return (ENXIO);
+ }
+ sc->reg_bst = rman_get_bustag(sc->reg);
+ sc->reg_bsh = rman_get_bushandle(sc->reg);
+
+ /* Map SLI, do it only once */
+ if (!sli0_s2m_regx_base) {
+ bus_space_map(sc->reg_bst, SLIX_S2M_REGX_ACC,
+ SLIX_S2M_REGX_ACC_SIZE, 0, &sli0_s2m_regx_base);
+ }
+ if (!sli1_s2m_regx_base) {
+ bus_space_map(sc->reg_bst, SLIX_S2M_REGX_ACC +
+ SLIX_S2M_REGX_ACC_SPACING, SLIX_S2M_REGX_ACC_SIZE, 0,
+ &sli1_s2m_regx_base);
+ }
+
+ if ((sli0_s2m_regx_base == 0) || (sli1_s2m_regx_base == 0)) {
+ device_printf(dev,
+ "bus_space_map failed to map slix_s2m_regx_base\n");
+ goto fail;
+ }
+
+ /* Identify PEM */
+ if (thunder_pem_identify(dev) != 0)
+ goto fail;
+
+ /* Initialize rman and allocate regions */
+ sc->mem_rman.rm_type = RMAN_ARRAY;
+ sc->mem_rman.rm_descr = "PEM PCIe Memory";
+ error = rman_init(&sc->mem_rman);
+ if (error != 0) {
+ device_printf(dev, "memory rman_init() failed. error = %d\n",
+ error);
+ goto fail;
+ }
+ sc->io_rman.rm_type = RMAN_ARRAY;
+ sc->io_rman.rm_descr = "PEM PCIe IO";
+ error = rman_init(&sc->io_rman);
+ if (error != 0) {
+ device_printf(dev, "IO rman_init() failed. error = %d\n",
+ error);
+ goto fail_mem;
+ }
+
+ /* Fill memory window */
+ sc->ranges[0].pci_base = PCI_MEMORY_BASE;
+ sc->ranges[0].size = PCI_MEMORY_SIZE;
+ sc->ranges[0].phys_base = sc->sli_window_base + SLI_PCI_OFFSET +
+ sc->ranges[0].pci_base;
+ rman_manage_region(&sc->mem_rman, sc->ranges[0].phys_base,
+ sc->ranges[0].phys_base + sc->ranges[0].size - 1);
+
+ /* Fill IO window */
+ sc->ranges[1].pci_base = PCI_IO_BASE;
+ sc->ranges[1].size = PCI_IO_SIZE;
+ sc->ranges[1].phys_base = sc->sli_window_base + SLI_PCI_OFFSET +
+ sc->ranges[1].pci_base;
+ rman_manage_region(&sc->io_rman, sc->ranges[1].phys_base,
+ sc->ranges[1].phys_base + sc->ranges[1].size - 1);
+
+ if (thunder_pem_init(sc)) {
+ device_printf(dev, "Failure during PEM init\n");
+ goto fail_io;
+ }
+
+ device_add_child(dev, "pci", -1);
+
+ return (bus_generic_attach(dev));
+
+fail_io:
+ rman_fini(&sc->io_rman);
+fail_mem:
+ rman_fini(&sc->mem_rman);
+fail:
+ bus_free_resource(dev, SYS_RES_MEMORY, sc->reg);
+ return (ENXIO);
+}
+
+static void
+thunder_pem_release_all(device_t dev)
+{
+ struct thunder_pem_softc *sc;
+
+ sc = device_get_softc(dev);
+
+ rman_fini(&sc->io_rman);
+ rman_fini(&sc->mem_rman);
+
+ if (sc->reg != NULL)
+ bus_free_resource(dev, SYS_RES_MEMORY, sc->reg);
+}
+
+static int
+thunder_pem_detach(device_t dev)
+{
+
+ thunder_pem_release_all(dev);
+
+ return (0);
+}
+
+static devclass_t thunder_pem_devclass;
+
+DRIVER_MODULE(thunder_pem, pci, thunder_pem_driver, thunder_pem_devclass, 0, 0);
+MODULE_DEPEND(thunder_pem, pci, 1, 1, 1);
Modified: head/sys/conf/files.arm64
==============================================================================
--- head/sys/conf/files.arm64 Sat Aug 8 21:09:41 2015 (r286476)
+++ head/sys/conf/files.arm64 Sat Aug 8 21:32:03 2015 (r286477)
@@ -51,6 +51,7 @@ arm64/arm64/unwind.c optional ddb | kdt
arm64/arm64/vfp.c standard
arm64/arm64/vm_machdep.c standard
arm64/cavium/thunder_pcie.c optional thunder_pci fdt
+arm64/cavium/thunder_pcie_pem.c optional thunder_pci
arm64/cavium/thunder_pcie_common.c optional thunder_pci
crypto/blowfish/bf_enc.c optional crypto | ipsec
crypto/des/des_enc.c optional crypto | ipsec | netsmb
More information about the svn-src-head
mailing list