svn commit: r264085 - head/sys/mips/conf
Sean Bruno
sbruno at FreeBSD.org
Thu Apr 3 20:12:40 UTC 2014
Author: sbruno
Date: Thu Apr 3 20:12:39 2014
New Revision: 264085
URL: http://svnweb.freebsd.org/changeset/base/264085
Log:
Add support for the Dlink DIR-825C1 74k MIPS router based on Atheros
wireless, bridge and CPU.
Added:
head/sys/mips/conf/DIR-825C1 (contents, props changed)
head/sys/mips/conf/DIR-825C1.hints (contents, props changed)
Added: head/sys/mips/conf/DIR-825C1
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/mips/conf/DIR-825C1 Thu Apr 3 20:12:39 2014 (r264085)
@@ -0,0 +1,66 @@
+# $FreeBSD$
+#
+# Specific board setup for the D-Link DIR-825C1 router.
+#
+# The DIR-825C1 has the following hardware:
+#
+# + AR9344 CPU SoC 74k MIPS
+# + ARxxx 2.4GHz 11n
+# + ARXXX 5GHz 11n
+# + AR8327 Gigabit switch
+# + m25p80 based 16MB flash
+# + 128MB RAM
+# + uboot environment
+
+# Include the default AR934x parameters
+include "AR934X_BASE"
+ident DIR825C1
+
+# Override hints with board values
+hints "DIR-825C1.hints"
+
+# Force the board memory - the base DB120 has 128MB RAM
+options AR71XX_REALMEM=(128*1024*1024)
+
+# i2c GPIO bus
+device gpioiic
+device iicbb
+device iicbus
+device iic
+
+# Options required for miiproxy and mdiobus
+options ARGE_MDIO # Export an MDIO bus separate from arge
+device miiproxy # MDIO bus <-> MII PHY rendezvous
+
+device etherswitch
+device arswitch
+
+# read MSDOS formatted disks - USB
+options MSDOSFS
+
+# Enable the uboot environment stuff rather then the
+# redboot stuff.
+options AR71XX_ENV_UBOOT
+
+# Used for the static uboot partition map
+device geom_map
+
+# uzip - to boot natively from flash
+options GEOM_UNCOMPRESS
+options GEOM_PART_GPT
+
+# yes, this board has a PCI connected atheros device
+device ath_pci
+options AR71XX_ATH_EEPROM
+device firmware # Used by the above
+options ATH_EEPROM_FIRMWARE
+
+# Boot off of the rootfs, as defined in the geom_map setup.
+options ROOTDEVNAME=\"ufs:map/rootfs.uncompress\"
+
+# In order to netboot, you have to build the mfsroot into the kernel
+# 19443712 or 19M is the biggest rootfs via netboot this thing supports
+#options MD_ROOT # md device usable as a potential root device
+#options MD_ROOT_SIZE=19444
+#makeoptions MFS_IMAGE=/tftpboot/mfsroot-dir825c1.img.ulzma
+#options ROOTDEVNAME=\"ufs:md0.uncompress\"
Added: head/sys/mips/conf/DIR-825C1.hints
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/mips/conf/DIR-825C1.hints Thu Apr 3 20:12:39 2014 (r264085)
@@ -0,0 +1,130 @@
+# $FreeBSD$
+
+# This is a placeholder until the hardware support is complete.
+
+# mdiobus0 on arge0
+hint.argemdio.0.at="nexus0"
+hint.argemdio.0.maddr=0x19000000
+hint.argemdio.0.msize=0x1000
+hint.argemdio.0.order=0
+
+# DIR-825C1 GMAC configuration
+# + AR934X_ETH_CFG_RGMII_GMAC0 (1 << 0)
+# Onboard AR9344 10/100 switch is not wired up
+hint.ar934x_gmac.0.gmac_cfg=0x1
+
+# GMAC0 here - connected to an AR8327
+hint.arswitch.0.at="mdio0"
+hint.arswitch.0.is_7240=0
+hint.arswitch.0.is_9340=0 # not the internal switch!
+hint.arswitch.0.numphys=5
+hint.arswitch.0.phy4cpu=0
+hint.arswitch.0.is_rgmii=1
+hint.arswitch.0.is_gmii=0
+
+# Other AR8327 configuration parameters
+
+# AR8327_PAD_MAC_RGMII
+hint.arswitch.0.pad.0.mode=6
+hint.arswitch.0.pad.0.txclk_delay_en=1
+hint.arswitch.0.pad.0.rxclk_delay_en=1
+
+# AR8327_CLK_DELAY_SEL1
+hint.arswitch.0.pad.0.txclk_delay_sel=1
+# AR8327_CLK_DELAY_SEL2
+hint.arswitch.0.pad.0.rxclk_delay_sel=2
+
+# XXX there's no LED management just yet!
+hint.arswitch.0.led.ctrl0=0x00000000
+hint.arswitch.0.led.ctrl1=0xc737c737
+hint.arswitch.0.led.ctrl2=0x00000000
+hint.arswitch.0.led.ctrl3=0x00c30c00
+hint.arswitch.0.led.open_drain=1
+
+# force_link=1 is required for the rest of the parameters
+# to be configured.
+hint.arswitch.0.port.0.force_link=1
+hint.arswitch.0.port.0.speed=1000
+hint.arswitch.0.port.0.duplex=1
+hint.arswitch.0.port.0.txpause=1
+hint.arswitch.0.port.0.rxpause=1
+
+# XXX OpenWRT DB120 BSP doesn't have media/duplex set?
+hint.arge.0.phymask=0x0
+hint.arge.0.media=1000
+hint.arge.0.fduplex=1
+hint.arge.0.miimode=3 # RGMII
+hint.arge.0.pll_1000=0x06000000
+
+# ath0: Where the ART is - last 64k in the flash
+hint.ath.0.eepromaddr=0x1fff0000
+hint.ath.0.eepromsize=16384
+
+# ath1: it's different; it's a PCIe attached device, so
+# we instead need to teach the PCIe bridge code about it
+# (ie, the 'early pci fixup' stuff that programs the PCIe
+# host registers on the NIC) and then we teach ath where
+# to find it.
+
+# ath1 hint - pcie slot 0
+hint.pcib.0.bus.0.0.0.ath_fixup_addr=0x1fff4000
+hint.pcib.0.bus.0.0.0.ath_fixup_size=16384
+
+# ath0 - eeprom comes from here
+hint.ath.1.eeprom_firmware="pcib.0.bus.0.0.0.eeprom_firmware"
+
+# flash layout:
+# m25p80 spi0.0: mx25l12805d (16384 Kbytes)
+#
+# uBoot firmware variables:
+# bootargs=console=ttyS0,115200 root=31:02 rootfstype=jffs2 init=/sbin/init
+# mtdparts=ath-nor0:256k(u-boot),64k(u-boot-env),6336k(rootfs),1408k(uImage),64k(mib0),64k(ART)
+
+# 64KiB u-boot
+hint.map.0.at="flash/spi0"
+hint.map.0.start=0x00000000
+hint.map.0.end= 0x00010000
+hint.map.0.name="u-boot"
+hint.map.0.readonly=1
+
+# 64KiB u-boot-env
+hint.map.1.at="flash/spi0"
+hint.map.1.start=0x00010000
+hint.map.1.end= 0x00020000
+hint.map.1.name="u-boot-env"
+hint.map.1.readonly=1
+
+# 1344KiB kernel
+hint.map.2.at="flash/spi0"
+hint.map.2.start=0x00020000
+hint.map.2.end="search:0x00100000:0x10000:.!/bin/sh"
+hint.map.2.name="kernel"
+hint.map.2.readonly=1
+
+# 14592KiB rootfs
+hint.map.3.at="flash/spi0"
+hint.map.3.start="search:0x00100000:0x10000:.!/bin/sh"
+hint.map.3.end=0x00fb0000
+hint.map.3.name="rootfs"
+hint.map.3.readonly=1
+
+# 192KiB lang -- remapped to cfg
+hint.map.4.at="flash/spi0"
+hint.map.4.start=0x00fb0000
+hint.map.4.end= 0x00fe0000
+hint.map.4.name="cfg"
+hint.map.4.readonly=0
+
+# 64KiB mac
+hint.map.5.at="flash/spi0"
+hint.map.5.start=0x00fe0000
+hint.map.5.end= 0x00ff0000
+hint.map.5.name="mac"
+hint.map.5.readonly=1
+
+# 64KiB art
+hint.map.6.at="flash/spi0"
+hint.map.6.start=0x00ff0000
+hint.map.6.end= 0x01000000
+hint.map.6.name="art"
+hint.map.6.readonly=1
More information about the svn-src-head
mailing list