svn commit: r233081 - head/sys/mips/atheros
Adrian Chadd
adrian at FreeBSD.org
Sat Mar 17 07:25:24 UTC 2012
Author: adrian
Date: Sat Mar 17 07:25:23 2012
New Revision: 233081
URL: http://svn.freebsd.org/changeset/base/233081
Log:
Begin fleshing out MII clock rate configuration changes.
These are needed for some particular port configurations where the default
speed isn't suitable for all link speed types. (Ie, changing 10/100/1000MBit
PLL rate requires a similar MII clock rate, rather than a fixed MII rate.)
This is:
* only currently implemented for the ar71xx;
* isn't used anywhere (yet), as the final interface for this hasn't yet
been determined.
Modified:
head/sys/mips/atheros/ar71xx_chip.c
head/sys/mips/atheros/ar71xx_cpudef.h
head/sys/mips/atheros/ar71xxreg.h
head/sys/mips/atheros/ar724x_chip.c
head/sys/mips/atheros/ar91xx_chip.c
Modified: head/sys/mips/atheros/ar71xx_chip.c
==============================================================================
--- head/sys/mips/atheros/ar71xx_chip.c Sat Mar 17 06:54:42 2012 (r233080)
+++ head/sys/mips/atheros/ar71xx_chip.c Sat Mar 17 07:25:23 2012 (r233081)
@@ -136,6 +136,46 @@ ar71xx_chip_device_stopped(uint32_t mask
return ((reg & mask) == mask);
}
+static void
+ar71xx_chip_set_mii_speed(uint32_t unit, uint32_t speed)
+{
+ uint32_t val, reg, ctrl;
+
+ switch (unit) {
+ case 0:
+ reg = AR71XX_MII0_CTRL;
+ break;
+ case 1:
+ reg = AR71XX_MII1_CTRL;
+ break;
+ default:
+ printf("%s: invalid MII unit set for arge unit: %d\n",
+ __func__, unit);
+ return;
+ }
+
+ switch (speed) {
+ case 10:
+ ctrl = MII_CTRL_SPEED_10;
+ break;
+ case 100:
+ ctrl = MII_CTRL_SPEED_100;
+ break;
+ case 1000:
+ ctrl = MII_CTRL_SPEED_1000;
+ break;
+ default:
+ printf("%s: invalid MII speed (%d) set for arge unit: %d\n",
+ __func__, speed, unit);
+ return;
+ }
+
+ val = ATH_READ_REG(reg);
+ val &= ~(MII_CTRL_SPEED_MASK << MII_CTRL_SPEED_SHIFT);
+ val |= (ctrl & MII_CTRL_SPEED_MASK) << MII_CTRL_SPEED_SHIFT;
+ ATH_WRITE_REG(reg, val);
+}
+
/* Speed is either 10, 100 or 1000 */
static void
ar71xx_chip_set_pll_ge(int unit, int speed)
@@ -237,6 +277,7 @@ struct ar71xx_cpu_def ar71xx_chip_def =
&ar71xx_chip_device_start,
&ar71xx_chip_device_stopped,
&ar71xx_chip_set_pll_ge,
+ &ar71xx_chip_set_mii_speed,
&ar71xx_chip_ddr_flush_ge,
&ar71xx_chip_get_eth_pll,
&ar71xx_chip_ddr_flush_ip2,
Modified: head/sys/mips/atheros/ar71xx_cpudef.h
==============================================================================
--- head/sys/mips/atheros/ar71xx_cpudef.h Sat Mar 17 06:54:42 2012 (r233080)
+++ head/sys/mips/atheros/ar71xx_cpudef.h Sat Mar 17 07:25:23 2012 (r233081)
@@ -36,6 +36,7 @@ struct ar71xx_cpu_def {
void (* ar71xx_chip_device_start) (uint32_t);
int (* ar71xx_chip_device_stopped) (uint32_t);
void (* ar71xx_chip_set_pll_ge) (int, int);
+ void (* ar71xx_chip_set_mii_speed) (uint32_t, uint32_t);
void (* ar71xx_chip_ddr_flush_ge) (int);
uint32_t (* ar71xx_chip_get_eth_pll) (unsigned int, int);
@@ -84,6 +85,11 @@ static inline void ar71xx_device_set_pll
ar71xx_cpu_ops->ar71xx_chip_set_pll_ge(unit, speed);
}
+static inline void ar71xx_device_set_mii_speed(int unit, int speed)
+{
+ ar71xx_cpu_ops->ar71xx_chip_set_mii_speed(unit, speed);
+}
+
static inline void ar71xx_device_flush_ddr_ge(int unit)
{
ar71xx_cpu_ops->ar71xx_chip_ddr_flush_ge(unit);
Modified: head/sys/mips/atheros/ar71xxreg.h
==============================================================================
--- head/sys/mips/atheros/ar71xxreg.h Sat Mar 17 06:54:42 2012 (r233080)
+++ head/sys/mips/atheros/ar71xxreg.h Sat Mar 17 07:25:23 2012 (r233081)
@@ -268,6 +268,17 @@
#define AR91XX_REV_ID_REVISION_SHIFT 2
/*
+ * AR71xx MII control region
+ */
+#define AR71XX_MII0_CTRL 0x18070000
+#define AR71XX_MII1_CTRL 0x18070004
+#define MII_CTRL_SPEED_SHIFT 4
+#define MII_CTRL_SPEED_MASK 3
+#define MII_CTRL_SPEED_10 0
+#define MII_CTRL_SPEED_100 1
+#define MII_CTRL_SPEED_1000 2
+
+/*
* GigE adapters region
*/
#define AR71XX_MAC0_BASE 0x19000000
Modified: head/sys/mips/atheros/ar724x_chip.c
==============================================================================
--- head/sys/mips/atheros/ar724x_chip.c Sat Mar 17 06:54:42 2012 (r233080)
+++ head/sys/mips/atheros/ar724x_chip.c Sat Mar 17 07:25:23 2012 (r233081)
@@ -123,6 +123,13 @@ ar724x_chip_device_stopped(uint32_t mask
}
static void
+ar724x_chip_set_mii_speed(uint32_t unit, uint32_t speed)
+{
+ /* XXX TODO */
+ return;
+}
+
+static void
ar724x_chip_set_pll_ge(int unit, int speed)
{
@@ -220,6 +227,7 @@ struct ar71xx_cpu_def ar724x_chip_def =
&ar724x_chip_device_start,
&ar724x_chip_device_stopped,
&ar724x_chip_set_pll_ge,
+ &ar724x_chip_set_mii_speed,
&ar724x_chip_ddr_flush_ge,
&ar724x_chip_get_eth_pll,
&ar724x_chip_ddr_flush_ip2,
Modified: head/sys/mips/atheros/ar91xx_chip.c
==============================================================================
--- head/sys/mips/atheros/ar91xx_chip.c Sat Mar 17 06:54:42 2012 (r233080)
+++ head/sys/mips/atheros/ar91xx_chip.c Sat Mar 17 07:25:23 2012 (r233081)
@@ -111,6 +111,13 @@ ar91xx_chip_device_stopped(uint32_t mask
}
static void
+ar91xx_chip_set_mii_speed(uint32_t unit, uint32_t speed)
+{
+ /* XXX TODO */
+}
+
+
+static void
ar91xx_chip_set_pll_ge(int unit, int speed)
{
uint32_t pll;
@@ -209,6 +216,7 @@ struct ar71xx_cpu_def ar91xx_chip_def =
&ar91xx_chip_device_start,
&ar91xx_chip_device_stopped,
&ar91xx_chip_set_pll_ge,
+ &ar91xx_chip_set_mii_speed,
&ar91xx_chip_ddr_flush_ge,
&ar91xx_chip_get_eth_pll,
&ar91xx_chip_ddr_flush_ip2,
More information about the svn-src-head
mailing list