svn commit: r227508 - head/sys/boot/fdt/dts
Marcel Moolenaar
marcel at FreeBSD.org
Mon Nov 14 19:06:29 UTC 2011
Author: marcel
Date: Mon Nov 14 19:06:28 2011
New Revision: 227508
URL: http://svn.freebsd.org/changeset/base/227508
Log:
Add DTS for the Freescale P1020RDB.
Added:
head/sys/boot/fdt/dts/p1020rdb.dts (contents, props changed)
Added: head/sys/boot/fdt/dts/p1020rdb.dts
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/boot/fdt/dts/p1020rdb.dts Mon Nov 14 19:06:28 2011 (r227508)
@@ -0,0 +1,627 @@
+/*
+ * P1020 RDB Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/* $FreeBSD$ */
+
+/dts-v1/;
+
+/ {
+ model = "fsl,P1020";
+ compatible = "fsl,P1020RDB";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,P1020 at 0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,P1020 at 1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ };
+
+ localbus at ffe05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
+ reg = <0 0xffe05000 0 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ /* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+ ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+ 0x1 0x0 0x0 0xffa00000 0x00040000
+ 0x2 0x0 0x0 0xffb00000 0x00020000>;
+
+ nor at 0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x1000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ partition at 0 {
+ /* This location must not be altered */
+ /* 256KB for Vitesse 7385 Switch firmware */
+ reg = <0x0 0x00040000>;
+ label = "NOR (RO) Vitesse-7385 Firmware";
+ read-only;
+ };
+
+ partition at 40000 {
+ /* 256KB for DTB Image */
+ reg = <0x00040000 0x00040000>;
+ label = "NOR (RO) DTB Image";
+ read-only;
+ };
+
+ partition at 80000 {
+ /* 3.5 MB for Linux Kernel Image */
+ reg = <0x00080000 0x00380000>;
+ label = "NOR (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition at 400000 {
+ /* 11MB for JFFS2 based Root file System */
+ reg = <0x00400000 0x00b00000>;
+ label = "NOR (RW) JFFS2 Root File System";
+ };
+
+ partition at f00000 {
+ /* This location must not be altered */
+ /* 512KB for u-boot Bootloader Image */
+ /* 512KB for u-boot Environment Variables */
+ reg = <0x00f00000 0x00100000>;
+ label = "NOR (RO) U-Boot Image";
+ read-only;
+ };
+ };
+
+ nand at 1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,p1020-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x1 0x0 0x40000>;
+
+ partition at 0 {
+ /* This location must not be altered */
+ /* 1MB for u-boot Bootloader Image */
+ reg = <0x0 0x00100000>;
+ label = "NAND (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition at 100000 {
+ /* 1MB for DTB Image */
+ reg = <0x00100000 0x00100000>;
+ label = "NAND (RO) DTB Image";
+ read-only;
+ };
+
+ partition at 200000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00200000 0x00400000>;
+ label = "NAND (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition at 600000 {
+ /* 4MB for Compressed Root file System Image */
+ reg = <0x00600000 0x00400000>;
+ label = "NAND (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition at a00000 {
+ /* 7MB for JFFS2 based Root file System */
+ reg = <0x00a00000 0x00700000>;
+ label = "NAND (RW) JFFS2 Root File System";
+ };
+
+ partition at 1100000 {
+ /* 15MB for JFFS2 based Root file System */
+ reg = <0x01100000 0x00f00000>;
+ label = "NAND (RW) Writable User area";
+ };
+ };
+
+ L2switch at 2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "vitesse-7385";
+ reg = <0x2 0x0 0x20000>;
+ };
+
+ };
+
+ soc at ffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,p1020-immr", "simple-bus";
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law at 0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm at 1000 {
+ compatible = "fsl,p1020-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <16 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ memory-controller at 2000 {
+ compatible = "fsl,p1020-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ i2c at 3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ rtc at 68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ };
+ };
+
+ i2c at 3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ serial0: serial at 4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial at 4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ interrupts = <42 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ spi at 7000 {
+ cell-index = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,espi";
+ reg = <0x7000 0x1000>;
+ interrupts = <59 0x2>;
+ interrupt-parent = <&mpic>;
+ mode = "cpu";
+
+ fsl_m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,espi-flash";
+ reg = <0>;
+ linux,modalias = "fsl_m25p80";
+ modal = "s25sl128b";
+ spi-max-frequency = <50000000>;
+ mode = <0>;
+
+ partition at 0 {
+ /* 512KB for u-boot Bootloader Image */
+ reg = <0x0 0x00080000>;
+ label = "SPI (RO) U-Boot Image";
+ read-only;
+ };
+
+ partition at 80000 {
+ /* 512KB for DTB Image */
+ reg = <0x00080000 0x00080000>;
+ label = "SPI (RO) DTB Image";
+ read-only;
+ };
+
+ partition at 100000 {
+ /* 4MB for Linux Kernel Image */
+ reg = <0x00100000 0x00400000>;
+ label = "SPI (RO) Linux Kernel Image";
+ read-only;
+ };
+
+ partition at 500000 {
+ /* 4MB for Compressed RFS Image */
+ reg = <0x00500000 0x00400000>;
+ label = "SPI (RO) Compressed RFS Image";
+ read-only;
+ };
+
+ partition at 900000 {
+ /* 7MB for JFFS2 based RFS */
+ reg = <0x00900000 0x00700000>;
+ label = "SPI (RW) JFFS2 RFS";
+ };
+ };
+ };
+
+ gpio: gpio-controller at f000 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8572-gpio";
+ reg = <0xf000 0x100>;
+ interrupts = <47 0x2>;
+ interrupt-parent = <&mpic>;
+ gpio-controller;
+ };
+
+ L2: l2-cache-controller at 20000 {
+ compatible = "fsl,p1020-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x40000>; // L2,256K
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ dma at 21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel at 0 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel at 80 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel at 100 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel at 180 {
+ compatible = "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ mdio at 24000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-mdio";
+ reg = <0x24000 0x1000 0xb0030 0x4>;
+
+ phy0: ethernet-phy at 0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <3 1>;
+ reg = <0x0>;
+ };
+
+ phy1: ethernet-phy at 1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <2 1>;
+ reg = <0x1>;
+ };
+ };
+
+ mdio at 25000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,etsec2-tbi";
+ reg = <0x25000 0x1000 0xb1030 0x4>;
+
+ tbi0: tbi-phy at 11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet0: ethernet at b0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupt-parent = <&mpic>;
+ fixed-link = <1 1 1000 0 0>;
+ phy-connection-type = "rgmii-id";
+
+ queue-group at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb0000 0x1000>;
+ interrupts = <29 2 30 2 34 2>;
+ };
+
+ queue-group at 1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb4000 0x1000>;
+ interrupts = <17 2 18 2 24 2>;
+ };
+ };
+
+ enet1: ethernet at b1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
+ phy-connection-type = "sgmii";
+
+ queue-group at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb1000 0x1000>;
+ interrupts = <35 2 36 2 40 2>;
+ };
+
+ queue-group at 1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb5000 0x1000>;
+ interrupts = <51 2 52 2 67 2>;
+ };
+ };
+
+ enet2: ethernet at b2000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "fsl,etsec2";
+ fsl,num_rx_queues = <0x8>;
+ fsl,num_tx_queues = <0x8>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ queue-group at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb2000 0x1000>;
+ interrupts = <31 2 32 2 33 2>;
+ };
+
+ queue-group at 1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0xb6000 0x1000>;
+ interrupts = <25 2 26 2 27 2>;
+ };
+ };
+
+ usb at 22000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x22000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <28 0x2>;
+ phy_type = "ulpi";
+ };
+
+ /* USB2 is shared with localbus, so it must be disabled
+ by default. We can't put 'status = "disabled";' here
+ since U-Boot doesn't clear the status property when
+ it enables USB2. OTOH, U-Boot does create a new node
+ when there isn't any. So, just comment it out.
+ usb at 23000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl-usb2-dr";
+ reg = <0x23000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <46 0x2>;
+ phy_type = "ulpi";
+ };
+ */
+
+ sdhci at 2e000 {
+ compatible = "fsl,p1020-esdhc", "fsl,esdhc";
+ reg = <0x2e000 0x1000>;
+ interrupts = <72 0x2>;
+ interrupt-parent = <&mpic>;
+ /* Filled in by U-Boot */
+ clock-frequency = <0>;
+ };
+
+ crypto at 30000 {
+ compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+ "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0xbfe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ };
+
+ mpic: pic at 40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ };
+
+ msi at 41600 {
+ compatible = "fsl,p1020-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ global-utilities at e0000 { //global utilities block
+ compatible = "fsl,p1020-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+ };
+
+ pci0: pcie at ffe09000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe09000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc30000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ pcie at 0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+
+ pci1: pcie at ffe0a000 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0 0xffe0a000 0 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ pcie at 0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
More information about the svn-src-head
mailing list