svn commit: r214363 - head/sys/dev/e1000
Jack F Vogel
jfv at FreeBSD.org
Tue Oct 26 00:07:58 UTC 2010
Author: jfv
Date: Tue Oct 26 00:07:58 2010
New Revision: 214363
URL: http://svn.freebsd.org/changeset/base/214363
Log:
Bug fix delta to the em driver:
- Chasin down bogus watchdogs has led to an improved
design to this handling, the hang decision takes
place in the tx cleanup, with only a simple report
check in local_timer. Our tests have shown no false
watchdogs with this code.
- VLAN fixes from jhb, the shadow vfta should be per
interface, but as global it was not. Thanks John.
- Bug fixes in the support for new PCH2 hardware.
- Thanks for all the help and feedback on the driver,
changes to lem with be coming shortly as well.
Modified:
head/sys/dev/e1000/if_em.c
head/sys/dev/e1000/if_em.h
Modified: head/sys/dev/e1000/if_em.c
==============================================================================
--- head/sys/dev/e1000/if_em.c Mon Oct 25 23:59:56 2010 (r214362)
+++ head/sys/dev/e1000/if_em.c Tue Oct 26 00:07:58 2010 (r214363)
@@ -93,8 +93,7 @@ int em_display_debug_stats = 0;
/*********************************************************************
* Driver version:
*********************************************************************/
-char em_driver_version[] = "7.0.8";
-
+char em_driver_version[] = "7.1.6";
/*********************************************************************
* PCI Device ID Table
@@ -170,6 +169,8 @@ static em_vendor_info_t em_vendor_info_a
{ 0x8086, E1000_DEV_ID_PCH_M_HV_LC, PCI_ANY_ID, PCI_ANY_ID, 0},
{ 0x8086, E1000_DEV_ID_PCH_D_HV_DM, PCI_ANY_ID, PCI_ANY_ID, 0},
{ 0x8086, E1000_DEV_ID_PCH_D_HV_DC, PCI_ANY_ID, PCI_ANY_ID, 0},
+ { 0x8086, E1000_DEV_ID_PCH2_LV_LM, PCI_ANY_ID, PCI_ANY_ID, 0},
+ { 0x8086, E1000_DEV_ID_PCH2_LV_V, PCI_ANY_ID, PCI_ANY_ID, 0},
/* required last entry */
{ 0, 0, 0, 0, 0}
};
@@ -256,6 +257,8 @@ static int em_dma_malloc(struct adapter
static void em_dma_free(struct adapter *, struct em_dma_alloc *);
static int em_sysctl_nvm_info(SYSCTL_HANDLER_ARGS);
static void em_print_nvm_info(struct adapter *);
+static int em_sysctl_debug_info(SYSCTL_HANDLER_ARGS);
+static void em_print_debug_info(struct adapter *);
static int em_is_valid_ether_addr(u8 *);
static int em_sysctl_int_delay(SYSCTL_HANDLER_ARGS);
static void em_add_int_delay_sysctl(struct adapter *, const char *,
@@ -282,6 +285,8 @@ static void em_handle_link(void *context
static void em_add_rx_process_limit(struct adapter *, const char *,
const char *, int *, int);
+static void em_set_flow_cntrl(struct adapter *, const char *,
+ const char *, int *, int);
static __inline void em_rx_discard(struct rx_ring *, int);
@@ -359,14 +364,6 @@ TUNABLE_INT("hw.em.rx_process_limit", &e
static int em_fc_setting = e1000_fc_full;
TUNABLE_INT("hw.em.fc_setting", &em_fc_setting);
-/*
-** Shadow VFTA table, this is needed because
-** the real vlan filter table gets cleared during
-** a soft reset and the driver needs to be able
-** to repopulate it.
-*/
-static u32 em_shadow_vfta[EM_VFTA_SIZE];
-
/* Global used in WOL setup with multiport cards */
static int global_quad_port_a = 0;
@@ -449,6 +446,11 @@ em_attach(device_t dev)
OID_AUTO, "nvm", CTLTYPE_INT|CTLFLAG_RW, adapter, 0,
em_sysctl_nvm_info, "I", "NVM Information");
+ SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
+ SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
+ OID_AUTO, "debug", CTLTYPE_INT|CTLFLAG_RW, adapter, 0,
+ em_sysctl_debug_info, "I", "Debug Information");
+
callout_init_mtx(&adapter->timer, &adapter->core_mtx, 0);
/* Determine hardware and mac info */
@@ -468,9 +470,10 @@ em_attach(device_t dev)
** identified
*/
if ((adapter->hw.mac.type == e1000_ich8lan) ||
- (adapter->hw.mac.type == e1000_pchlan) ||
(adapter->hw.mac.type == e1000_ich9lan) ||
- (adapter->hw.mac.type == e1000_ich10lan)) {
+ (adapter->hw.mac.type == e1000_ich10lan) ||
+ (adapter->hw.mac.type == e1000_pchlan) ||
+ (adapter->hw.mac.type == e1000_pch2lan)) {
int rid = EM_BAR_TYPE_FLASH;
adapter->flash = bus_alloc_resource_any(dev,
SYS_RES_MEMORY, &rid, RF_ACTIVE);
@@ -514,11 +517,16 @@ em_attach(device_t dev)
E1000_REGISTER(&adapter->hw, E1000_TADV),
em_tx_abs_int_delay_dflt);
- /* Sysctls for limiting the amount of work done in the taskqueue */
+ /* Sysctl for limiting the amount of work done in the taskqueue */
em_add_rx_process_limit(adapter, "rx_processing_limit",
"max number of rx packets to process", &adapter->rx_process_limit,
em_rx_process_limit);
+ /* Sysctl for setting the interface flow control */
+ em_set_flow_cntrl(adapter, "flow_control",
+ "max number of rx packets to process",
+ &adapter->fc_setting, em_fc_setting);
+
/*
* Validate number of transmit and receive descriptors. It
* must not exceed hardware maximum, and must be multiple
@@ -581,6 +589,11 @@ em_attach(device_t dev)
goto err_late;
}
+ /* Check SOL/IDER usage */
+ if (e1000_check_reset_block(&adapter->hw))
+ device_printf(dev, "PHY reset is blocked"
+ " due to SOL/IDER session.\n");
+
/*
** Start from a known state, this is
** important in reading the nvm and
@@ -644,11 +657,6 @@ em_attach(device_t dev)
adapter->hw.mac.get_link_status = 1;
em_update_link_status(adapter);
- /* Indicate SOL/IDER usage */
- if (e1000_check_reset_block(&adapter->hw))
- device_printf(dev,
- "PHY reset is blocked due to SOL/IDER session.\n");
-
/* Register for VLAN events */
adapter->vlan_attach = EVENTHANDLER_REGISTER(vlan_config,
em_register_vlan, adapter, EVENTHANDLER_PRI_FIRST);
@@ -857,7 +865,7 @@ em_mq_start_locked(struct ifnet *ifp, st
if (enq > 0) {
/* Set the watchdog */
- txr->watchdog_check = TRUE;
+ txr->queue_status = EM_QUEUE_WORKING;
txr->watchdog_time = ticks;
}
return (err);
@@ -870,14 +878,8 @@ static int
em_mq_start(struct ifnet *ifp, struct mbuf *m)
{
struct adapter *adapter = ifp->if_softc;
- struct tx_ring *txr;
- int i = 0, error = 0;
-
- /* Which queue to use */
- if ((m->m_flags & M_FLOWID) != 0)
- i = m->m_pkthdr.flowid % adapter->num_queues;
-
- txr = &adapter->tx_rings[i];
+ struct tx_ring *txr = adapter->tx_rings;
+ int error;
if (EM_TX_TRYLOCK(txr)) {
error = em_mq_start_locked(ifp, txr, m);
@@ -953,7 +955,7 @@ em_start_locked(struct ifnet *ifp, struc
/* Set timeout in case hardware has problems transmitting. */
txr->watchdog_time = ticks;
- txr->watchdog_check = TRUE;
+ txr->queue_status = EM_QUEUE_WORKING;
}
return;
@@ -1029,6 +1031,7 @@ em_ioctl(struct ifnet *ifp, u_long comma
case e1000_82572:
case e1000_ich9lan:
case e1000_ich10lan:
+ case e1000_pch2lan:
case e1000_82574:
case e1000_80003es2lan: /* 9K Jumbo Frame size */
max_frame_size = 9234;
@@ -1092,6 +1095,11 @@ em_ioctl(struct ifnet *ifp, u_long comma
}
break;
case SIOCSIFMEDIA:
+ /*
+ ** As the speed/duplex settings are being
+ ** changed, we need to reset the PHY.
+ */
+ adapter->hw.phy.reset_disable = FALSE;
/* Check SOL/IDER usage */
EM_CORE_LOCK(adapter);
if (e1000_check_reset_block(&adapter->hw)) {
@@ -1101,6 +1109,7 @@ em_ioctl(struct ifnet *ifp, u_long comma
break;
}
EM_CORE_UNLOCK(adapter);
+ /* falls thru */
case SIOCGIFMEDIA:
IOCTL_DEBUGOUT("ioctl rcv'd: \
SIOCxIFMEDIA (Get/Set Interface Media)");
@@ -1215,13 +1224,16 @@ em_init_locked(struct adapter *adapter)
case e1000_82583:
pba = E1000_PBA_20K; /* 20K for Rx, 20K for Tx */
break;
+ case e1000_ich8lan:
+ pba = E1000_PBA_8K;
+ break;
case e1000_ich9lan:
case e1000_ich10lan:
case e1000_pchlan:
pba = E1000_PBA_10K;
break;
- case e1000_ich8lan:
- pba = E1000_PBA_8K;
+ case e1000_pch2lan:
+ pba = E1000_PBA_26K;
break;
default:
if (adapter->max_frame_size > 8192)
@@ -1259,19 +1271,6 @@ em_init_locked(struct adapter *adapter)
/* Setup VLAN support, basic and offload if available */
E1000_WRITE_REG(&adapter->hw, E1000_VET, ETHERTYPE_VLAN);
- /* Use real VLAN Filter support? */
- if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING) {
- if (ifp->if_capenable & IFCAP_VLAN_HWFILTER)
- /* Use real VLAN Filter support */
- em_setup_vlan_hw_support(adapter);
- else {
- u32 ctrl;
- ctrl = E1000_READ_REG(&adapter->hw, E1000_CTRL);
- ctrl |= E1000_CTRL_VME;
- E1000_WRITE_REG(&adapter->hw, E1000_CTRL, ctrl);
- }
- }
-
/* Set hardware offload abilities */
ifp->if_hwassist = 0;
if (ifp->if_capenable & IFCAP_TXCSUM)
@@ -1289,6 +1288,17 @@ em_init_locked(struct adapter *adapter)
/* Setup Multicast table */
em_set_multi(adapter);
+ /*
+ ** Figure out the desired mbuf
+ ** pool for doing jumbos
+ */
+ if (adapter->max_frame_size <= 2048)
+ adapter->rx_mbuf_sz = MCLBYTES;
+ else if (adapter->max_frame_size <= 4096)
+ adapter->rx_mbuf_sz = MJUMPAGESIZE;
+ else
+ adapter->rx_mbuf_sz = MJUM9BYTES;
+
/* Prepare receive descriptors and buffers */
if (em_setup_receive_structures(adapter)) {
device_printf(dev, "Could not setup receive structures\n");
@@ -1297,6 +1307,19 @@ em_init_locked(struct adapter *adapter)
}
em_initialize_receive_unit(adapter);
+ /* Use real VLAN Filter support? */
+ if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING) {
+ if (ifp->if_capenable & IFCAP_VLAN_HWFILTER)
+ /* Use real VLAN Filter support */
+ em_setup_vlan_hw_support(adapter);
+ else {
+ u32 ctrl;
+ ctrl = E1000_READ_REG(&adapter->hw, E1000_CTRL);
+ ctrl |= E1000_CTRL_VME;
+ E1000_WRITE_REG(&adapter->hw, E1000_CTRL, ctrl);
+ }
+ }
+
/* Don't lose promiscuous settings */
em_set_promisc(adapter);
@@ -1707,11 +1730,6 @@ em_media_change(struct ifnet *ifp)
device_printf(adapter->dev, "Unsupported media type\n");
}
- /* As the speed/duplex settings my have changed we need to
- * reset the PHY.
- */
- adapter->hw.phy.reset_disable = FALSE;
-
em_init_locked(adapter);
EM_CORE_UNLOCK(adapter);
@@ -1929,15 +1947,12 @@ em_xmit(struct tx_ring *txr, struct mbuf
m_head = *m_headp;
/* Do hardware assists */
-#if __FreeBSD_version >= 700000
if (m_head->m_pkthdr.csum_flags & CSUM_TSO) {
- em_tso_setup(txr, m_head, ip_off, ip, tp, &txd_upper,
- &txd_lower);
+ em_tso_setup(txr, m_head, ip_off, ip, tp,
+ &txd_upper, &txd_lower);
/* we need to make a final sentinel transmit desc */
tso_desc = TRUE;
- } else
-#endif
- if (m_head->m_pkthdr.csum_flags & CSUM_OFFLOAD)
+ } else if (m_head->m_pkthdr.csum_flags & CSUM_OFFLOAD)
em_transmit_checksum_setup(txr, m_head,
ip_off, ip, &txd_upper, &txd_lower);
@@ -2164,34 +2179,30 @@ em_local_timer(void *arg)
em_update_stats_counters(adapter);
/* Reset LAA into RAR[0] on 82571 */
- if (e1000_get_laa_state_82571(&adapter->hw) == TRUE)
+ if ((adapter->hw.mac.type == e1000_82571) &&
+ e1000_get_laa_state_82571(&adapter->hw))
e1000_rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
/*
- ** If flow control has paused us since last checking
- ** it invalidates the watchdog timing, so dont run it.
+ ** Don't do TX watchdog check if we've been paused
*/
if (adapter->pause_frames) {
adapter->pause_frames = 0;
goto out;
}
/*
- ** Check for time since any descriptor was cleaned
+ ** Check on the state of the TX queue(s), this
+ ** can be done without the lock because its RO
+ ** and the HUNG state will be static if set.
*/
- for (int i = 0; i < adapter->num_queues; i++, txr++) {
- EM_TX_LOCK(txr);
- if (txr->watchdog_check == FALSE) {
- EM_TX_UNLOCK(txr);
- continue;
- }
- if ((ticks - txr->watchdog_time) > EM_WATCHDOG)
+ for (int i = 0; i < adapter->num_queues; i++, txr++)
+ if (txr->queue_status == EM_QUEUE_HUNG)
goto hung;
- EM_TX_UNLOCK(txr);
- }
out:
callout_reset(&adapter->timer, hz, em_local_timer, adapter);
return;
hung:
+ /* Looks like we're hung */
device_printf(adapter->dev, "Watchdog timeout -- resetting\n");
device_printf(adapter->dev,
"Queue(%d) tdh = %d, hw tdt = %d\n", txr->me,
@@ -2272,7 +2283,7 @@ em_update_link_status(struct adapter *ad
adapter->link_active = 0;
/* Link down, disable watchdog */
for (int i = 0; i < adapter->num_queues; i++, txr++)
- txr->watchdog_check = FALSE;
+ txr->queue_status = EM_QUEUE_IDLE;
if_link_state_change(ifp, LINK_STATE_DOWN);
}
}
@@ -2306,7 +2317,7 @@ em_stop(void *arg)
/* Unarm watchdog timer. */
for (int i = 0; i < adapter->num_queues; i++, txr++) {
EM_TX_LOCK(txr);
- txr->watchdog_check = FALSE;
+ txr->queue_status = EM_QUEUE_IDLE;
EM_TX_UNLOCK(txr);
}
@@ -2571,6 +2582,9 @@ em_free_pci_resources(struct adapter *ad
for (int i = 0; i < adapter->num_queues; i++) {
txr = &adapter->tx_rings[i];
rxr = &adapter->rx_rings[i];
+ /* an early abort? */
+ if ((txr == NULL) || (rxr == NULL))
+ break;
rid = txr->msix +1;
if (txr->tag != NULL) {
bus_teardown_intr(dev, txr->res, txr->tag);
@@ -2689,6 +2703,7 @@ static void
em_reset(struct adapter *adapter)
{
device_t dev = adapter->dev;
+ struct ifnet *ifp = adapter->ifp;
struct e1000_hw *hw = &adapter->hw;
u16 rx_buffer_size;
@@ -2733,15 +2748,25 @@ em_reset(struct adapter *adapter)
hw->fc.send_xon = TRUE;
/* Set Flow control, use the tunable location if sane */
- if ((em_fc_setting >= 0) || (em_fc_setting < 4))
- hw->fc.requested_mode = em_fc_setting;
- else
- hw->fc.requested_mode = e1000_fc_none;
+ hw->fc.requested_mode = adapter->fc_setting;
- /* Override - workaround for PCHLAN issue */
+ /* Workaround: no TX flow ctrl for PCH */
if (hw->mac.type == e1000_pchlan)
hw->fc.requested_mode = e1000_fc_rx_pause;
+ /* Override - settings for PCH2LAN, ya its magic :) */
+ if (hw->mac.type == e1000_pch2lan) {
+ hw->fc.high_water = 0x5C20;
+ hw->fc.low_water = 0x5048;
+ hw->fc.pause_time = 0x0650;
+ hw->fc.refresh_time = 0x0400;
+ /* Jumbos need adjusted PBA */
+ if (ifp->if_mtu > ETHERMTU)
+ E1000_WRITE_REG(hw, E1000_PBA, 12);
+ else
+ E1000_WRITE_REG(hw, E1000_PBA, 26);
+ }
+
/* Issue a global reset */
e1000_reset_hw(hw);
E1000_WRITE_REG(hw, E1000_WUC, 0);
@@ -3173,6 +3198,7 @@ em_setup_transmit_ring(struct tx_ring *t
/* Set number of descriptors available */
txr->tx_avail = adapter->num_tx_desc;
+ txr->queue_status = EM_QUEUE_IDLE;
/* Clear checksum offload context. */
txr->last_hw_offload = 0;
@@ -3233,7 +3259,7 @@ em_initialize_transmit_unit(struct adapt
E1000_READ_REG(&adapter->hw, E1000_TDBAL(i)),
E1000_READ_REG(&adapter->hw, E1000_TDLEN(i)));
- txr->watchdog_check = FALSE;
+ txr->queue_status = EM_QUEUE_IDLE;
}
/* Set the default values for the Tx Inter Packet Gap timer */
@@ -3610,16 +3636,20 @@ static bool
em_txeof(struct tx_ring *txr)
{
struct adapter *adapter = txr->adapter;
- int first, last, done;
+ int first, last, done, processed;
struct em_buffer *tx_buffer;
struct e1000_tx_desc *tx_desc, *eop_desc;
struct ifnet *ifp = adapter->ifp;
EM_TX_LOCK_ASSERT(txr);
- if (txr->tx_avail == adapter->num_tx_desc)
+ /* No work, make sure watchdog is off */
+ if (txr->tx_avail == adapter->num_tx_desc) {
+ txr->queue_status = EM_QUEUE_IDLE;
return (FALSE);
+ }
+ processed = 0;
first = txr->next_to_clean;
tx_desc = &txr->tx_base[first];
tx_buffer = &txr->tx_buffers[first];
@@ -3646,6 +3676,7 @@ em_txeof(struct tx_ring *txr)
tx_desc->lower.data = 0;
tx_desc->buffer_addr = 0;
++txr->tx_avail;
+ ++processed;
if (tx_buffer->m_head) {
bus_dmamap_sync(txr->txtag,
@@ -3681,6 +3712,16 @@ em_txeof(struct tx_ring *txr)
txr->next_to_clean = first;
+ /*
+ ** Watchdog calculation, we know there's
+ ** work outstanding or the first return
+ ** would have been taken, so none processed
+ ** for too long indicates a hang. local timer
+ ** will examine this and do a reset if needed.
+ */
+ if ((!processed) && ((ticks - txr->watchdog_time) > EM_WATCHDOG))
+ txr->queue_status = EM_QUEUE_HUNG;
+
/*
* If we have enough room, clear IFF_DRV_OACTIVE
* to tell the stack that it is OK to send packets.
@@ -3689,7 +3730,7 @@ em_txeof(struct tx_ring *txr)
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
/* Disable watchdog if all clean */
if (txr->tx_avail == adapter->num_tx_desc) {
- txr->watchdog_check = FALSE;
+ txr->queue_status = EM_QUEUE_IDLE;
return (FALSE);
}
}
@@ -3723,7 +3764,8 @@ em_refresh_mbufs(struct rx_ring *rxr, in
*/
if (rxbuf->m_head != NULL)
goto reuse;
- m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
+ m = m_getjcl(M_DONTWAIT, MT_DATA,
+ M_PKTHDR, adapter->rx_mbuf_sz);
/*
** If we have a temporary resource shortage
** that causes a failure, just abort refresh
@@ -3732,10 +3774,7 @@ em_refresh_mbufs(struct rx_ring *rxr, in
*/
if (m == NULL)
goto update;
- m->m_len = m->m_pkthdr.len = MCLBYTES;
-
- if (adapter->max_frame_size <= (MCLBYTES - ETHER_ALIGN))
- m_adj(m, ETHER_ALIGN);
+ m->m_len = m->m_pkthdr.len = adapter->rx_mbuf_sz;
/* Use bus_dma machinery to setup the memory mapping */
error = bus_dmamap_load_mbuf_sg(rxr->rxtag, rxbuf->map,
@@ -3801,9 +3840,9 @@ em_allocate_receive_buffers(struct rx_ri
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
- MCLBYTES, /* maxsize */
+ MJUM9BYTES, /* maxsize */
1, /* nsegments */
- MCLBYTES, /* maxsegsize */
+ MJUM9BYTES, /* maxsegsize */
0, /* flags */
NULL, /* lockfunc */
NULL, /* lockarg */
@@ -3871,12 +3910,13 @@ em_setup_receive_ring(struct rx_ring *rx
for (int j = 0; j != adapter->num_rx_desc; ++j) {
rxbuf = &rxr->rx_buffers[j];
- rxbuf->m_head = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
+ rxbuf->m_head = m_getjcl(M_DONTWAIT, MT_DATA,
+ M_PKTHDR, adapter->rx_mbuf_sz);
if (rxbuf->m_head == NULL)
return (ENOBUFS);
- rxbuf->m_head->m_len = MCLBYTES;
+ rxbuf->m_head->m_len = adapter->rx_mbuf_sz;
rxbuf->m_head->m_flags &= ~M_HASFCS; /* we strip it */
- rxbuf->m_head->m_pkthdr.len = MCLBYTES;
+ rxbuf->m_head->m_pkthdr.len = adapter->rx_mbuf_sz;
/* Get the memory mapping */
error = bus_dmamap_load_mbuf_sg(rxr->rxtag,
@@ -4082,6 +4122,23 @@ em_initialize_receive_unit(struct adapte
E1000_WRITE_REG(hw, E1000_RDT(i), adapter->num_rx_desc - 1);
}
+ /* Set early receive threshold on appropriate hw */
+ if (((adapter->hw.mac.type == e1000_ich9lan) ||
+ (adapter->hw.mac.type == e1000_pch2lan) ||
+ (adapter->hw.mac.type == e1000_ich10lan)) &&
+ (ifp->if_mtu > ETHERMTU)) {
+ u32 rxdctl = E1000_READ_REG(hw, E1000_RXDCTL(0));
+ E1000_WRITE_REG(hw, E1000_RXDCTL(0), rxdctl | 3);
+ E1000_WRITE_REG(hw, E1000_ERT, 0x100 | (1 << 13));
+ }
+
+ if (adapter->hw.mac.type == e1000_pch2lan) {
+ if (ifp->if_mtu > ETHERMTU)
+ e1000_lv_jumbo_workaround_ich8lan(hw, TRUE);
+ else
+ e1000_lv_jumbo_workaround_ich8lan(hw, FALSE);
+ }
+
/* Setup the Receive Control Register */
rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
@@ -4094,7 +4151,14 @@ em_initialize_receive_unit(struct adapte
/* Make sure VLAN Filters are off */
rctl &= ~E1000_RCTL_VFE;
rctl &= ~E1000_RCTL_SBP;
- rctl |= E1000_RCTL_SZ_2048;
+
+ if (adapter->rx_mbuf_sz == MCLBYTES)
+ rctl |= E1000_RCTL_SZ_2048;
+ else if (adapter->rx_mbuf_sz == MJUMPAGESIZE)
+ rctl |= E1000_RCTL_SZ_4096 | E1000_RCTL_BSEX;
+ else if (adapter->rx_mbuf_sz > MJUMPAGESIZE)
+ rctl |= E1000_RCTL_SZ_8192 | E1000_RCTL_BSEX;
+
if (ifp->if_mtu > ETHERMTU)
rctl |= E1000_RCTL_LPE;
else
@@ -4190,7 +4254,7 @@ em_rxeof(struct rx_ring *rxr, int count,
rxr->fmp->m_flags |= M_VLANTAG;
}
#ifdef EM_MULTIQUEUE
- rxr->fmp->m_pkthdr.flowid = curcpu;
+ rxr->fmp->m_pkthdr.flowid = rxr->msix;
rxr->fmp->m_flags |= M_FLOWID;
#endif
#ifndef __NO_STRICT_ALIGNMENT
@@ -4253,6 +4317,7 @@ skip:
static __inline void
em_rx_discard(struct rx_ring *rxr, int i)
{
+ struct adapter *adapter = rxr->adapter;
struct em_buffer *rbuf;
struct mbuf *m;
@@ -4267,7 +4332,7 @@ em_rx_discard(struct rx_ring *rxr, int i
/* Reset state, keep loaded DMA map and reuse */
m = rbuf->m_head;
- m->m_len = m->m_pkthdr.len = MCLBYTES;
+ m->m_len = m->m_pkthdr.len = adapter->rx_mbuf_sz;
m->m_flags |= M_PKTHDR;
m->m_data = m->m_ext.ext_buf;
m->m_next = NULL;
@@ -4378,12 +4443,15 @@ em_register_vlan(void *arg, struct ifnet
if ((vtag == 0) || (vtag > 4095)) /* Invalid ID */
return;
+ EM_CORE_LOCK(adapter);
index = (vtag >> 5) & 0x7F;
bit = vtag & 0x1F;
- em_shadow_vfta[index] |= (1 << bit);
+ adapter->shadow_vfta[index] |= (1 << bit);
++adapter->num_vlans;
/* Re-init to load the changes */
- em_init(adapter);
+ if (ifp->if_capenable & IFCAP_VLAN_HWFILTER)
+ em_init_locked(adapter);
+ EM_CORE_UNLOCK(adapter);
}
/*
@@ -4402,12 +4470,15 @@ em_unregister_vlan(void *arg, struct ifn
if ((vtag == 0) || (vtag > 4095)) /* Invalid */
return;
+ EM_CORE_LOCK(adapter);
index = (vtag >> 5) & 0x7F;
bit = vtag & 0x1F;
- em_shadow_vfta[index] &= ~(1 << bit);
+ adapter->shadow_vfta[index] &= ~(1 << bit);
--adapter->num_vlans;
/* Re-init to load the changes */
- em_init(adapter);
+ if (ifp->if_capenable & IFCAP_VLAN_HWFILTER)
+ em_init_locked(adapter);
+ EM_CORE_UNLOCK(adapter);
}
static void
@@ -4430,9 +4501,9 @@ em_setup_vlan_hw_support(struct adapter
** we need to repopulate it now.
*/
for (int i = 0; i < EM_VFTA_SIZE; i++)
- if (em_shadow_vfta[i] != 0)
+ if (adapter->shadow_vfta[i] != 0)
E1000_WRITE_REG_ARRAY(hw, E1000_VFTA,
- i, em_shadow_vfta[i]);
+ i, adapter->shadow_vfta[i]);
reg = E1000_READ_REG(hw, E1000_CTRL);
reg |= E1000_CTRL_VME;
@@ -4443,10 +4514,6 @@ em_setup_vlan_hw_support(struct adapter
reg &= ~E1000_RCTL_CFIEN;
reg |= E1000_RCTL_VFE;
E1000_WRITE_REG(hw, E1000_RCTL, reg);
-
- /* Update the frame size */
- E1000_WRITE_REG(&adapter->hw, E1000_RLPML,
- adapter->max_frame_size + VLAN_TAG_SIZE);
}
static void
@@ -4615,6 +4682,7 @@ em_get_wakeup(device_t dev)
case e1000_ich9lan:
case e1000_ich10lan:
case e1000_pchlan:
+ case e1000_pch2lan:
apme_mask = E1000_WUC_APME;
adapter->has_amt = TRUE;
eeprom_data = E1000_READ_REG(&adapter->hw, E1000_WUC);
@@ -4706,7 +4774,8 @@ em_enable_wakeup(device_t dev)
E1000_WRITE_REG(&adapter->hw, E1000_RCTL, rctl);
}
- if (adapter->hw.mac.type == e1000_pchlan) {
+ if ((adapter->hw.mac.type == e1000_pchlan) ||
+ (adapter->hw.mac.type == e1000_pch2lan)) {
if (em_enable_phy_wakeup(adapter))
return;
} else {
@@ -4739,16 +4808,7 @@ em_enable_phy_wakeup(struct adapter *ada
u16 preg;
/* copy MAC RARs to PHY RARs */
- for (int i = 0; i < adapter->hw.mac.rar_entry_count; i++) {
- mreg = E1000_READ_REG(hw, E1000_RAL(i));
- e1000_write_phy_reg(hw, BM_RAR_L(i), (u16)(mreg & 0xFFFF));
- e1000_write_phy_reg(hw, BM_RAR_M(i),
- (u16)((mreg >> 16) & 0xFFFF));
- mreg = E1000_READ_REG(hw, E1000_RAH(i));
- e1000_write_phy_reg(hw, BM_RAR_H(i), (u16)(mreg & 0xFFFF));
- e1000_write_phy_reg(hw, BM_RAR_CTRL(i),
- (u16)((mreg >> 16) & 0xFFFF));
- }
+ e1000_copy_rx_addrs_to_phy_ich8lan(hw);
/* copy MAC MTA to PHY MTA */
for (int i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
@@ -5359,4 +5419,70 @@ em_add_rx_process_limit(struct adapter *
OID_AUTO, name, CTLTYPE_INT|CTLFLAG_RW, limit, value, description);
}
+static void
+em_set_flow_cntrl(struct adapter *adapter, const char *name,
+ const char *description, int *limit, int value)
+{
+ *limit = value;
+ SYSCTL_ADD_INT(device_get_sysctl_ctx(adapter->dev),
+ SYSCTL_CHILDREN(device_get_sysctl_tree(adapter->dev)),
+ OID_AUTO, name, CTLTYPE_INT|CTLFLAG_RW, limit, value, description);
+}
+
+static int
+em_sysctl_debug_info(SYSCTL_HANDLER_ARGS)
+{
+ struct adapter *adapter;
+ int error;
+ int result;
+
+ result = -1;
+ error = sysctl_handle_int(oidp, &result, 0, req);
+
+ if (error || !req->newptr)
+ return (error);
+
+ if (result == 1) {
+ adapter = (struct adapter *)arg1;
+ em_print_debug_info(adapter);
+ }
+
+ return (error);
+}
+
+/*
+** This routine is meant to be fluid, add whatever is
+** needed for debugging a problem. -jfv
+*/
+static void
+em_print_debug_info(struct adapter *adapter)
+{
+ device_t dev = adapter->dev;
+ struct tx_ring *txr = adapter->tx_rings;
+ struct rx_ring *rxr = adapter->rx_rings;
+ if (adapter->ifp->if_drv_flags & IFF_DRV_RUNNING)
+ printf("Interface is RUNNING ");
+ else
+ printf("Interface is NOT RUNNING\n");
+ if (adapter->ifp->if_drv_flags & IFF_DRV_OACTIVE)
+ printf("and ACTIVE\n");
+ else
+ printf("and INACTIVE\n");
+
+ device_printf(dev, "hw tdh = %d, hw tdt = %d\n",
+ E1000_READ_REG(&adapter->hw, E1000_TDH(0)),
+ E1000_READ_REG(&adapter->hw, E1000_TDT(0)));
+ device_printf(dev, "hw rdh = %d, hw rdt = %d\n",
+ E1000_READ_REG(&adapter->hw, E1000_RDH(0)),
+ E1000_READ_REG(&adapter->hw, E1000_RDT(0)));
+ device_printf(dev, "Tx Queue Status = %d\n", txr->queue_status);
+ device_printf(dev, "TX descriptors avail = %d\n",
+ txr->tx_avail);
+ device_printf(dev, "Tx Descriptors avail failure = %ld\n",
+ txr->no_desc_avail);
+ device_printf(dev, "RX discarded packets = %ld\n",
+ rxr->rx_discarded);
+ device_printf(dev, "RX Next to Check = %d\n", rxr->next_to_check);
+ device_printf(dev, "RX Next to Refresh = %d\n", rxr->next_to_refresh);
+}
Modified: head/sys/dev/e1000/if_em.h
==============================================================================
--- head/sys/dev/e1000/if_em.h Mon Oct 25 23:59:56 2010 (r214362)
+++ head/sys/dev/e1000/if_em.h Tue Oct 26 00:07:58 2010 (r214363)
@@ -188,6 +188,10 @@
#define EM_EEPROM_APME 0x400;
#define EM_82544_APME 0x0004;
+#define EM_QUEUE_IDLE 0
+#define EM_QUEUE_WORKING 1
+#define EM_QUEUE_HUNG 2
+
/*
* TDBA/RDBA should be aligned on 16 byte boundary. But TDLEN/RDLEN should be
* multiple of 128 bytes. So we align TDBA/RDBA on 128 byte boundary. This will
@@ -272,7 +276,7 @@ struct tx_ring {
u32 me;
u32 msix;
u32 ims;
- bool watchdog_check;
+ int queue_status;
int watchdog_time;
struct em_dma_alloc txdma;
struct e1000_tx_desc *tx_base;
@@ -391,6 +395,7 @@ struct adapter {
struct rx_ring *rx_rings;
int num_rx_desc;
u32 rx_process_limit;
+ u32 rx_mbuf_sz;
/* Management and WOL features */
u32 wol;
@@ -400,11 +405,21 @@ struct adapter {
/* Multicast array memory */
u8 *mta;
- /* Info about the board itself */
- uint8_t link_active;
- uint16_t link_speed;
- uint16_t link_duplex;
- uint32_t smartspeed;
+ /*
+ ** Shadow VFTA table, this is needed because
+ ** the real vlan filter table gets cleared during
+ ** a soft reset and the driver needs to be able
+ ** to repopulate it.
+ */
+ u32 shadow_vfta[EM_VFTA_SIZE];
+
+ /* Info about the interface */
+ u8 link_active;
+ u16 link_speed;
+ u16 link_duplex;
+ u32 smartspeed;
+ u32 fc_setting;
+
struct em_int_delay_info tx_int_delay;
struct em_int_delay_info tx_abs_int_delay;
struct em_int_delay_info rx_int_delay;
More information about the svn-src-head
mailing list