svn commit: r197263 - head/sys/dev/ciss

Scott Long scottl at FreeBSD.org
Wed Sep 16 23:27:15 UTC 2009


Author: scottl
Date: Wed Sep 16 23:27:14 2009
New Revision: 197263
URL: http://svn.freebsd.org/changeset/base/197263

Log:
  Sync driver with Yahoo:
  
  - Implement MSI support (MSIX support was already there)
  - Use a table to drive MSI/MSIX exceptions
  - Pre-calculate the command address instead of wasting cycles doing the
    calculation on every i/o.

Modified:
  head/sys/dev/ciss/ciss.c
  head/sys/dev/ciss/cissreg.h
  head/sys/dev/ciss/cissvar.h

Modified: head/sys/dev/ciss/ciss.c
==============================================================================
--- head/sys/dev/ciss/ciss.c	Wed Sep 16 23:17:22 2009	(r197262)
+++ head/sys/dev/ciss/ciss.c	Wed Sep 16 23:27:14 2009	(r197263)
@@ -279,8 +279,10 @@ TUNABLE_INT("hw.ciss.force_interrupt", &
  * stick with matching against subvendor/subdevice, and thus have to
  * be updated for every new CISS adapter that appears.
  */
-#define CISS_BOARD_SA5	(1<<0)
-#define CISS_BOARD_SA5B	(1<<1)
+#define CISS_BOARD_UNKNWON	0
+#define CISS_BOARD_SA5		1
+#define CISS_BOARD_SA5B		2
+#define CISS_BOARD_NOMSI	(1<<4)
 
 static struct
 {
@@ -289,10 +291,10 @@ static struct
     int		flags;
     char	*desc;
 } ciss_vendor_data[] = {
-    { 0x0e11, 0x4070, CISS_BOARD_SA5,	"Compaq Smart Array 5300" },
-    { 0x0e11, 0x4080, CISS_BOARD_SA5B,	"Compaq Smart Array 5i" },
-    { 0x0e11, 0x4082, CISS_BOARD_SA5B,	"Compaq Smart Array 532" },
-    { 0x0e11, 0x4083, CISS_BOARD_SA5B,	"HP Smart Array 5312" },
+    { 0x0e11, 0x4070, CISS_BOARD_SA5|CISS_BOARD_NOMSI,	"Compaq Smart Array 5300" },
+    { 0x0e11, 0x4080, CISS_BOARD_SA5B|CISS_BOARD_NOMSI,	"Compaq Smart Array 5i" },
+    { 0x0e11, 0x4082, CISS_BOARD_SA5B|CISS_BOARD_NOMSI,	"Compaq Smart Array 532" },
+    { 0x0e11, 0x4083, CISS_BOARD_SA5B|CISS_BOARD_NOMSI,	"HP Smart Array 5312" },
     { 0x0e11, 0x4091, CISS_BOARD_SA5,	"HP Smart Array 6i" },
     { 0x0e11, 0x409A, CISS_BOARD_SA5,	"HP Smart Array 641" },
     { 0x0e11, 0x409B, CISS_BOARD_SA5,	"HP Smart Array 642" },
@@ -661,7 +663,6 @@ ciss_init_pci(struct ciss_softc *sc)
 	(CISS_TRANSPORT_METHOD_SIMPLE | CISS_TRANSPORT_METHOD_PERF))) {
 	ciss_printf(sc, "No supported transport layers: 0x%x\n",
 	    sc->ciss_cfg->supported_methods);
-	return(ENXIO);
     }
 
     switch (ciss_force_transport) {
@@ -677,7 +678,7 @@ ciss_init_pci(struct ciss_softc *sc)
     }
 
 setup:
-    if (supported_methods & CISS_TRANSPORT_METHOD_PERF) {
+    if ((supported_methods & CISS_TRANSPORT_METHOD_PERF) != 0) {
 	method = CISS_TRANSPORT_METHOD_PERF;
 	sc->ciss_perf = (struct ciss_perf_config *)(cbase + cofs +
 	    sc->ciss_cfg->transport_offset);
@@ -744,7 +745,7 @@ setup:
 	 * controller.  Hopefully enabling this bit universally will work OK.
 	 * It seems to work fine for SA6i controllers.
 	 */
-        sc->ciss_interrupt_mask = CISS_TL_PERF_INTR_OPQ | CISS_TL_PERF_INTR_MSI;
+	sc->ciss_interrupt_mask = CISS_TL_PERF_INTR_OPQ | CISS_TL_PERF_INTR_MSI;
 
     } else {
 	ciss_printf(sc, "SIMPLE Transport\n");
@@ -792,7 +793,7 @@ setup:
 			   BUS_SPACE_MAXADDR, 		/* highaddr */
 			   NULL, NULL, 			/* filter, filterarg */
 			   BUS_SPACE_MAXSIZE_32BIT,	/* maxsize */
-			   CISS_COMMAND_SG_LENGTH,	/* nsegments */
+			   CISS_MAX_SG_ELEMENTS,	/* nsegments */
 			   BUS_SPACE_MAXSIZE_32BIT,	/* maxsegsize */
 			   0,				/* flags */
 			   NULL, NULL,			/* lockfunc, lockarg */
@@ -810,7 +811,7 @@ setup:
 			   BUS_SPACE_MAXADDR,		/* lowaddr */
 			   BUS_SPACE_MAXADDR, 		/* highaddr */
 			   NULL, NULL, 			/* filter, filterarg */
-			   MAXBSIZE, CISS_COMMAND_SG_LENGTH,	/* maxsize, nsegments */
+			   MAXBSIZE, CISS_MAX_SG_ELEMENTS,	/* maxsize, nsegments */
 			   BUS_SPACE_MAXSIZE_32BIT,	/* maxsegsize */
 			   BUS_DMA_ALLOCNOW,		/* flags */
 			   busdma_lock_mutex, &sc->ciss_mtx,	/* lockfunc, lockarg */
@@ -823,32 +824,42 @@ setup:
 
 /************************************************************************
  * Setup MSI/MSIX operation (Performant only)
- * Four interrupts are available, but we only use 1 right now.
+ * Four interrupts are available, but we only use 1 right now.  If MSI-X
+ * isn't avaialble, try using MSI instead.
  */
 static int
 ciss_setup_msix(struct ciss_softc *sc)
 {
-    uint32_t id;
     int val, i;
 
     /* Weed out devices that don't actually support MSI */
-    id = (pci_get_subvendor(sc->ciss_dev) << 16) |
-	pci_get_subdevice(sc->ciss_dev);
-    if ((id == 0x0e114070) || (id == 0x0e114080) || (id == 0x0e114082) ||
-	(id == 0x0e114083))
+    i = ciss_lookup(sc->ciss_dev);
+    if (ciss_vendor_data[i].flags & CISS_BOARD_NOMSI)
 	return (EINVAL);
 
+    /*
+     * Only need to use the minimum number of MSI vectors, as the driver
+     * doesn't support directed MSIX interrupts.
+     */
     val = pci_msix_count(sc->ciss_dev);
-    if (val < CISS_MSI_COUNT)
-	return (EINVAL);
+    if (val < CISS_MSI_COUNT) {
+	val = pci_msi_count(sc->ciss_dev);
+	device_printf(sc->ciss_dev, "got %d MSI messages]\n", val);
+	if (val < CISS_MSI_COUNT)
+	    return (EINVAL);
+    }
     val = MIN(val, CISS_MSI_COUNT);
-    if (pci_alloc_msix(sc->ciss_dev, &val) != 0)
-	return (EINVAL);
+    if (pci_alloc_msix(sc->ciss_dev, &val) != 0) {
+	if (pci_alloc_msi(sc->ciss_dev, &val) != 0)
+	    return (EINVAL);
+    }
 
     sc->ciss_msi = val;
-    ciss_printf(sc, "Using MSIX interrupt\n");
+    if (bootverbose)
+	ciss_printf(sc, "Using %d MSIX interrupt%s\n", val,
+	    (val != 1) ? "s" : "");
 
-    for (i = 0; i < CISS_MSI_COUNT; i++)
+    for (i = 0; i < val; i++)
 	sc->ciss_irq_rid[i] = i + 1;
 
     return (0);
@@ -1031,7 +1042,7 @@ ciss_soft_reset(struct ciss_softc *sc)
 					   NULL, 0)) != 0)
 	    break;
 
-	cc = CISS_FIND_COMMAND(cr);
+	cc = cr->cr_cc;
 	cc->header.address = sc->ciss_controllers[i];
 
 	if ((error = ciss_synch_request(cr, 60 * 1000)) != 0)
@@ -1104,6 +1115,9 @@ ciss_init_requests(struct ciss_softc *sc
 	cr = &sc->ciss_request[i];
 	cr->cr_sc = sc;
 	cr->cr_tag = i;
+	cr->cr_cc = (struct ciss_command *)((uintptr_t)sc->ciss_command +
+	    CISS_COMMAND_ALLOC_SIZE * i);
+	cr->cr_ccphys = sc->ciss_command_phys + CISS_COMMAND_ALLOC_SIZE * i;
 	bus_dmamap_create(sc->ciss_buffer_dmat, 0, &cr->cr_datamap);
 	ciss_enqueue_free(cr);
     }
@@ -1257,7 +1271,7 @@ ciss_report_luns(struct ciss_softc *sc, 
     /*
      * Build the Report Logical/Physical LUNs command.
      */
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
     cr->cr_data = cll;
     cr->cr_length = report_size;
     cr->cr_flags = CISS_REQ_DATAIN;
@@ -1582,7 +1596,7 @@ ciss_inquiry_logical(struct ciss_softc *
     if ((error = ciss_get_request(sc, &cr)) != 0)
 	goto out;
 
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
     cr->cr_data = &ld->cl_geometry;
     cr->cr_length = sizeof(ld->cl_geometry);
     cr->cr_flags = CISS_REQ_DATAIN;
@@ -1646,7 +1660,7 @@ ciss_identify_logical(struct ciss_softc 
 				       (void **)&ld->cl_ldrive,
 				       sizeof(*ld->cl_ldrive))) != 0)
 	goto out;
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
     cc->header.address = *ld->cl_controller;	/* target controller */
     cbc = (struct ciss_bmic_cdb *)&(cc->cdb.cdb[0]);
     cbc->log_drive = CISS_LUN_TO_TARGET(ld->cl_address.logical.lun);
@@ -1742,7 +1756,7 @@ ciss_get_ldrive_status(struct ciss_softc
 				       (void **)&ld->cl_lstatus,
 				       sizeof(*ld->cl_lstatus))) != 0)
 	goto out;
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
     cc->header.address = *ld->cl_controller;	/* target controller */
     cbc = (struct ciss_bmic_cdb *)&(cc->cdb.cdb[0]);
     cbc->log_drive = CISS_LUN_TO_TARGET(ld->cl_address.logical.lun);
@@ -1832,7 +1846,7 @@ ciss_accept_media(struct ciss_softc *sc,
     if ((error = ciss_get_bmic_request(sc, &cr, CISS_BMIC_ACCEPT_MEDIA,
 				       NULL, 0)) != 0)
 	goto out;
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
     cc->header.address = *ld->cl_controller;	/* target controller */
     cbc = (struct ciss_bmic_cdb *)&(cc->cdb.cdb[0]);
     cbc->log_drive = ldrive;
@@ -2000,7 +2014,7 @@ ciss_start(struct ciss_request *cr)
     struct ciss_command	*cc;	/* XXX debugging only */
     int			error;
 
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
     debug(2, "post command %d tag %d ", cr->cr_tag, cc->header.host_tag);
 
     /*
@@ -2056,7 +2070,7 @@ ciss_done(struct ciss_softc *sc, cr_qhea
 	    continue;
 	}
 	cr = &(sc->ciss_request[index]);
-	cc = CISS_FIND_COMMAND(cr);
+	cc = cr->cr_cc;
 	cc->header.host_tag = tag;	/* not updated by adapter */
 	ciss_enqueue_complete(cr, qh);
     }
@@ -2085,7 +2099,7 @@ ciss_perf_done(struct ciss_softc *sc, cr
 	      (tag & CISS_HDR_HOST_TAG_ERROR) ? " with error" : "");
 	if (index < sc->ciss_max_requests) {
 	    cr = &(sc->ciss_request[index]);
-	    cc = CISS_FIND_COMMAND(cr);
+	    cc = cr->cr_cc;
 	    cc->header.host_tag = tag;	/* not updated by adapter */
 	    ciss_enqueue_complete(cr, qh);
 	} else {
@@ -2222,7 +2236,7 @@ _ciss_report_request(struct ciss_request
 
     debug_called(2);
 
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
     ce = (struct ciss_error_info *)&(cc->sg[0]);
 
     /*
@@ -2369,7 +2383,7 @@ ciss_abort_request(struct ciss_request *
 	return(error);
 
     /* build the abort command */
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
     cc->header.address.mode.mode = CISS_HDR_ADDRESS_MODE_PERIPHERAL;	/* addressing? */
     cc->header.address.physical.target = 0;
     cc->header.address.physical.bus = 0;
@@ -2438,12 +2452,12 @@ ciss_preen_command(struct ciss_request *
      * Note that we set up the error_info structure here, since the
      * length can be overwritten by any command.
      */
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
     cc->header.sg_in_list = 0;		/* kinda inefficient this way */
     cc->header.sg_total = 0;
     cc->header.host_tag = cr->cr_tag << 2;
     cc->header.host_tag_zeroes = 0;
-    cmdphys = CISS_FIND_COMMANDPHYS(cr);
+    cmdphys = cr->cr_ccphys;
     cc->error_info.error_info_address = cmdphys + sizeof(struct ciss_command);
     cc->error_info.error_info_length = CISS_COMMAND_ALLOC_SIZE - sizeof(struct ciss_command);
 }
@@ -2514,7 +2528,7 @@ ciss_get_bmic_request(struct ciss_softc 
     if (!dataout)
 	cr->cr_flags = CISS_REQ_DATAIN;
 
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
     cc->header.address.physical.mode = CISS_HDR_ADDRESS_MODE_PERIPHERAL;
     cc->header.address.physical.bus = 0;
     cc->header.address.physical.target = 0;
@@ -2562,7 +2576,7 @@ ciss_user_command(struct ciss_softc *sc,
      */
     while (ciss_get_request(sc, &cr) != 0)
 	msleep(sc, &sc->ciss_mtx, PPAUSE, "cissREQ", hz);
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
 
     /*
      * Allocate an in-kernel databuffer if required, copy in user data.
@@ -2667,7 +2681,7 @@ ciss_map_request(struct ciss_request *cr
 	if (sc->ciss_perf)
 	    CISS_TL_PERF_POST_CMD(sc, cr);
 	else
-	    CISS_TL_SIMPLE_POST_CMD(sc, CISS_FIND_COMMANDPHYS(cr));
+	    CISS_TL_SIMPLE_POST_CMD(sc, cr->cr_ccphys);
     }
 
     return(0);
@@ -2685,7 +2699,7 @@ ciss_request_map_helper(void *arg, bus_d
 
     cr = (struct ciss_request *)arg;
     sc = cr->cr_sc;
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
 
     for (i = 0; i < nseg; i++) {
 	cc->sg[i].address = segs[i].ds_addr;
@@ -2725,7 +2739,7 @@ ciss_request_map_helper(void *arg, bus_d
     if (sc->ciss_perf)
 	CISS_TL_PERF_POST_CMD(sc, cr);
     else
-	CISS_TL_SIMPLE_POST_CMD(sc, CISS_FIND_COMMANDPHYS(cr));
+	CISS_TL_SIMPLE_POST_CMD(sc, cr->cr_ccphys);
 }
 
 /************************************************************************
@@ -3091,7 +3105,7 @@ ciss_cam_action_io(struct cam_sim *sim, 
     /*
      * Build the command.
      */
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
     cr->cr_data = csio->data_ptr;
     cr->cr_length = csio->dxfer_len;
     cr->cr_complete = ciss_cam_complete;
@@ -3235,7 +3249,7 @@ ciss_cam_complete(struct ciss_request *c
     debug_called(2);
 
     sc = cr->cr_sc;
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
     ce = (struct ciss_error_info *)&(cc->sg[0]);
     csio = (struct ccb_scsiio *)cr->cr_private;
 
@@ -3414,7 +3428,7 @@ ciss_periodic(void *arg)
      * Send the NOP message and wait for a response.
      */
     if (ciss_nop_message_heartbeat != 0 && (error = ciss_get_request(sc, &cr)) == 0) {
-	cc = CISS_FIND_COMMAND(cr);
+	cc = cr->cr_cc;
 	cr->cr_complete = ciss_nop_complete;
 	cc->cdb.cdb_length = 1;
 	cc->cdb.type = CISS_CDB_TYPE_MESSAGE;
@@ -3484,7 +3498,7 @@ ciss_disable_adapter(struct ciss_softc *
 	if ((cr->cr_flags & CISS_REQ_BUSY) == 0)
 	    continue;
 
-	cc = CISS_FIND_COMMAND(cr);
+	cc = cr->cr_cc;
 	ce = (struct ciss_error_info *)&(cc->sg[0]);
 	ce->command_status = CISS_CMD_STATUS_HARDWARE_ERROR;
 	ciss_enqueue_complete(cr, &qh);
@@ -3561,7 +3575,7 @@ ciss_notify_event(struct ciss_softc *sc)
     ciss_preen_command(cr);
 
     /* (re)build the notify event command */
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
     cc->header.address.physical.mode = CISS_HDR_ADDRESS_MODE_PERIPHERAL;
     cc->header.address.physical.bus = 0;
     cc->header.address.physical.target = 0;
@@ -3615,7 +3629,7 @@ ciss_notify_complete(struct ciss_request
     int			command_status;
     debug_called(1);
 
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
     cn = (struct ciss_notify *)cr->cr_data;
     sc = cr->cr_sc;
 
@@ -3715,7 +3729,7 @@ ciss_notify_abort(struct ciss_softc *sc)
     cr->cr_length = CISS_NOTIFY_DATA_SIZE;
 
     /* build the CDB */
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
     cc->header.address.physical.mode = CISS_HDR_ADDRESS_MODE_PERIPHERAL;
     cc->header.address.physical.bus = 0;
     cc->header.address.physical.target = 0;
@@ -4174,7 +4188,7 @@ ciss_print_request(struct ciss_request *
     int			i;
 
     sc = cr->cr_sc;
-    cc = CISS_FIND_COMMAND(cr);
+    cc = cr->cr_cc;
 
     ciss_printf(sc, "REQUEST @ %p\n", cr);
     ciss_printf(sc, "  data %p/%d  tag %d  flags %b\n",

Modified: head/sys/dev/ciss/cissreg.h
==============================================================================
--- head/sys/dev/ciss/cissreg.h	Wed Sep 16 23:17:22 2009	(r197262)
+++ head/sys/dev/ciss/cissreg.h	Wed Sep 16 23:27:14 2009	(r197263)
@@ -731,7 +731,7 @@ struct ciss_bmic_flush_cache {
 #define CISS_TL_PERF_INTR_OPQ	(CISS_TL_SIMPLE_INTR_OPQ_SA5 | CISS_TL_SIMPLE_INTR_OPQ_SA5B)
 #define CISS_TL_PERF_INTR_MSI	0x01
 
-#define CISS_TL_PERF_POST_CMD(sc, cr)		CISS_TL_SIMPLE_WRITE(sc, CISS_TL_SIMPLE_IPQ, CISS_FIND_COMMANDPHYS(cr) | (cr)->cr_sg_tag)
+#define CISS_TL_PERF_POST_CMD(sc, cr)		CISS_TL_SIMPLE_WRITE(sc, CISS_TL_SIMPLE_IPQ, cr->cr_ccphys | (cr)->cr_sg_tag)
 #define CISS_TL_PERF_FLUSH_INT(sc)		CISS_TL_SIMPLE_READ(sc, CISS_TL_SIMPLE_OSR)
 #define CISS_TL_PERF_CLEAR_INT(sc)		CISS_TL_SIMPLE_WRITE(sc, CISS_TL_SIMPLE_ODC, CISS_TL_SIMPLE_ODC_CLEAR)
 #define CISS_CYCLE_MASK		0x00000001
@@ -747,4 +747,5 @@ struct ciss_bmic_flush_cache {
 			     CISS_TL_SIMPLE_READ(sc, CISS_TL_SIMPLE_IMR) & ~(sc)->ciss_interrupt_mask)
 
 
+
 #endif /* _KERNEL */

Modified: head/sys/dev/ciss/cissvar.h
==============================================================================
--- head/sys/dev/ciss/cissvar.h	Wed Sep 16 23:17:22 2009	(r197262)
+++ head/sys/dev/ciss/cissvar.h	Wed Sep 16 23:27:14 2009	(r197263)
@@ -103,6 +103,8 @@ struct ciss_request
     void			*cr_data;	/* data buffer */
     u_int32_t			cr_length;	/* data length */
     bus_dmamap_t		cr_datamap;	/* DMA map for data */
+    struct ciss_command		*cr_cc;
+    uint32_t			cr_ccphys;
     int				cr_tag;
     int				cr_flags;
 #define CISS_REQ_MAPPED		(1<<0)		/* data mapped */
@@ -131,18 +133,16 @@ struct ciss_request
  * scatter-gather list, and we also want to avoid having commands
  * cross page boundaries.
  *
- * Note that 512 bytes yields 28 scatter/gather entries, or the
- * ability to map (26 * PAGE_SIZE) + 2 bytes of data.  On x86, this is
- * 104kB.  256 bytes would only yield 12 entries, giving a mere 40kB,
- * too small.
+ * The size of the ciss_command is 52 bytes.  65 s/g elements are reserved
+ * to allow a max i/o size of 256k.  This gives a total command size of
+ * 1120 bytes, including the 32 byte alignment padding.  Modern controllers
+ * seem to saturate nicely at this value.
  */
 
-#define CISS_COMMAND_ALLOC_SIZE		512	/* XXX tune to get sensible s/g list length */
-#define CISS_COMMAND_SG_LENGTH	((CISS_COMMAND_ALLOC_SIZE - sizeof(struct ciss_command)) \
-				 / sizeof(struct ciss_sg_entry))
-
-/* XXX Prep for increasing max i/o */
-#define CISS_MAX_SG_ELEMENTS   17
+#define CISS_MAX_SG_ELEMENTS	65
+#define CISS_COMMAND_ALIGN	32
+#define CISS_COMMAND_SG_LENGTH	(sizeof(struct ciss_sg_entry) * CISS_MAX_SG_ELEMENTS)
+#define CISS_COMMAND_ALLOC_SIZE		(roundup2(sizeof(struct ciss_command) + CISS_COMMAND_SG_LENGTH, CISS_COMMAND_ALIGN))
 
 /*
  * Per-logical-drive data.
@@ -259,20 +259,6 @@ struct ciss_softc
     struct ciss_qstat		ciss_qstat[CISSQ_COUNT];	/* queue statistics */
 };
 
-/*
- * Given a request tag, find the corresponding command in virtual or
- * physical space.
- *
- * The arithmetic here is due to the allocation of ciss_command structures
- * inside CISS_COMMAND_ALLOC_SIZE blocks.  See the comment at the definition
- * of CISS_COMMAND_ALLOC_SIZE above.
- */
-#define CISS_FIND_COMMAND(cr)							\
-	(struct ciss_command *)((u_int8_t *)(cr)->cr_sc->ciss_command +		\
-				((cr)->cr_tag * CISS_COMMAND_ALLOC_SIZE))
-#define CISS_FIND_COMMANDPHYS(cr)	((cr)->cr_sc->ciss_command_phys + \
-					 ((cr)->cr_tag * CISS_COMMAND_ALLOC_SIZE))
-
 /************************************************************************
  * Debugging/diagnostic output.
  */


More information about the svn-src-head mailing list