svn commit: r184824 - in head/sys/dev/usb2: controller core
serial storage
Andrew Thompson
thompsa at FreeBSD.org
Sat Nov 22 13:02:38 PST 2008
On Wed, Nov 19, 2008 at 12:58:52AM -0800, Alfred Perlstein wrote:
> Cool, thank you, sorry I've been slow to pick up these deltas.
>
> I think we may be at a point where we can take some more of
> those changes you have.
>
> Can you resend them? I think you had two deltas?
I have updated them now for the below commit.
http://people.freebsd.org/~thompsa/usb_func2.diff
http://people.freebsd.org/~thompsa/usb_return2.diff
> * Andrew Thompson <thompsa at FreeBSD.org> [081110 12:54] wrote:
> > Author: thompsa
> > Date: Mon Nov 10 20:54:31 2008
> > New Revision: 184824
> > URL: http://svn.freebsd.org/changeset/base/184824
> >
> > Log:
> > Convert the two main locking areas into macros to make it clear on what we are
> > grabbing and why. These are now:
> >
> > USB_BUS_LOCK/USB_BUS_UNLOCK
> > USB_XFER_LOCK/USB_XFER_UNLOCK
> >
> > Reviewed by: alfred
> >
> > Modified:
> > head/sys/dev/usb2/controller/at91dci.c
> > head/sys/dev/usb2/controller/at91dci_atmelarm.c
> > head/sys/dev/usb2/controller/ehci2.c
> > head/sys/dev/usb2/controller/ehci2_pci.c
> > head/sys/dev/usb2/controller/musb2_otg.c
> > head/sys/dev/usb2/controller/musb2_otg_atmelarm.c
> > head/sys/dev/usb2/controller/ohci2.c
> > head/sys/dev/usb2/controller/ohci2_atmelarm.c
> > head/sys/dev/usb2/controller/ohci2_pci.c
> > head/sys/dev/usb2/controller/uhci2.c
> > head/sys/dev/usb2/controller/uhci2_pci.c
> > head/sys/dev/usb2/controller/usb2_bus.h
> > head/sys/dev/usb2/controller/usb2_controller.c
> > head/sys/dev/usb2/controller/uss820dci.c
> > head/sys/dev/usb2/controller/uss820dci_atmelarm.c
> > head/sys/dev/usb2/controller/uss820dci_pccard.c
> > head/sys/dev/usb2/core/usb2_busdma.c
> > head/sys/dev/usb2/core/usb2_core.h
> > head/sys/dev/usb2/core/usb2_device.c
> > head/sys/dev/usb2/core/usb2_handle_request.c
> > head/sys/dev/usb2/core/usb2_hub.c
> > head/sys/dev/usb2/core/usb2_request.c
> > head/sys/dev/usb2/core/usb2_sw_transfer.c
> > head/sys/dev/usb2/core/usb2_transfer.c
> > head/sys/dev/usb2/core/usb2_transfer.h
> > head/sys/dev/usb2/serial/uvscom2.c
> > head/sys/dev/usb2/storage/ata-usb2.c
> >
> > Modified: head/sys/dev/usb2/controller/at91dci.c
> > ==============================================================================
> > --- head/sys/dev/usb2/controller/at91dci.c Mon Nov 10 18:24:11 2008 (r184823)
> > +++ head/sys/dev/usb2/controller/at91dci.c Mon Nov 10 20:54:31 2008 (r184824)
> > @@ -291,7 +291,7 @@ at91dci_rem_wakeup_set(struct usb2_devic
> >
> > DPRINTFN(5, "is_on=%u\n", is_on);
> >
> > - mtx_assert(&udev->bus->mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
> >
> > sc = AT9100_DCI_BUS2SC(udev->bus);
> >
> > @@ -766,7 +766,7 @@ at91dci_vbus_interrupt(struct usb2_bus *
> >
> > DPRINTFN(5, "vbus = %u\n", is_on);
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> > if (is_on) {
> > if (!sc->sc_flags.status_vbus) {
> > sc->sc_flags.status_vbus = 1;
> > @@ -791,7 +791,7 @@ at91dci_vbus_interrupt(struct usb2_bus *
> > }
> > }
> >
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > return;
> > }
> > @@ -801,13 +801,13 @@ at91dci_interrupt(struct at91dci_softc *
> > {
> > uint32_t status;
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > status = AT91_UDP_READ_4(sc, AT91_UDP_ISR);
> > status &= AT91_UDP_INT_DEFAULT;
> >
> > if (!status) {
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> > return;
> > }
> > /* acknowledge interrupts */
> > @@ -879,7 +879,7 @@ at91dci_interrupt(struct at91dci_softc *
> >
> > at91dci_interrupt_poll(sc);
> > }
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > return;
> > }
> > @@ -1065,12 +1065,12 @@ at91dci_timeout(void *arg)
> >
> > DPRINTF("xfer=%p\n", xfer);
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > /* transfer is transferred */
> > at91dci_device_done(xfer, USB_ERR_TIMEOUT);
> >
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > return;
> > }
> > @@ -1115,7 +1115,7 @@ at91dci_root_intr_done(struct usb2_xfer
> >
> > DPRINTFN(9, "\n");
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > if (std->state != USB_SW_TR_PRE_DATA) {
> > if (std->state == USB_SW_TR_PRE_CALLBACK) {
> > @@ -1255,7 +1255,7 @@ at91dci_device_done(struct usb2_xfer *xf
> > struct at91dci_softc *sc = xfer->usb2_sc;
> > uint8_t ep_no;
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > DPRINTFN(2, "xfer=%p, pipe=%p, error=%d\n",
> > xfer, xfer->pipe, error);
> > @@ -1281,7 +1281,7 @@ at91dci_set_stall(struct usb2_device *ud
> > uint32_t csr_val;
> > uint8_t csr_reg;
> >
> > - mtx_assert(&udev->bus->mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
> >
> > DPRINTFN(5, "pipe=%p\n", pipe);
> >
> > @@ -1405,7 +1405,7 @@ at91dci_clear_stall(struct usb2_device *
> >
> > DPRINTFN(5, "pipe=%p\n", pipe);
> >
> > - mtx_assert(&udev->bus->mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
> >
> > /* check mode */
> > if (udev->flags.usb2_mode != USB_MODE_DEVICE) {
> > @@ -1438,7 +1438,7 @@ at91dci_init(struct at91dci_softc *sc)
> > sc->sc_bus.usbrev = USB_REV_1_1;
> > sc->sc_bus.methods = &at91dci_bus_methods;
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > /* turn on clocks */
> >
> > @@ -1446,7 +1446,7 @@ at91dci_init(struct at91dci_softc *sc)
> > (sc->sc_clocks_on) (sc->sc_clocks_arg);
> > }
> > /* wait a little for things to stabilise */
> > - usb2_pause_mtx(&sc->sc_bus.mtx, 1);
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx, 1);
> >
> > /* disable and clear all interrupts */
> >
> > @@ -1483,7 +1483,7 @@ at91dci_init(struct at91dci_softc *sc)
> >
> > at91dci_clocks_off(sc);
> >
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > /* catch any lost interrupts */
> >
> > @@ -1495,7 +1495,7 @@ at91dci_init(struct at91dci_softc *sc)
> > void
> > at91dci_uninit(struct at91dci_softc *sc)
> > {
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > /* disable and clear all interrupts */
> > AT91_UDP_WRITE_4(sc, AT91_UDP_IDR, 0xFFFFFFFF);
> > @@ -1510,7 +1510,7 @@ at91dci_uninit(struct at91dci_softc *sc)
> >
> > at91dci_pull_down(sc);
> > at91dci_clocks_off(sc);
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > return;
> > }
> > @@ -1532,10 +1532,10 @@ at91dci_do_poll(struct usb2_bus *bus)
> > {
> > struct at91dci_softc *sc = AT9100_DCI_BUS2SC(bus);
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> > at91dci_interrupt_poll(sc);
> > at91dci_root_ctrl_poll(sc);
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> > return;
> > }
> >
> > @@ -1897,7 +1897,7 @@ at91dci_root_ctrl_done(struct usb2_xfer
> > uint16_t index;
> > uint8_t use_polling;
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > if (std->state != USB_SW_TR_SETUP) {
> > if (std->state == USB_SW_TR_PRE_CALLBACK) {
> > @@ -1913,7 +1913,7 @@ at91dci_root_ctrl_done(struct usb2_xfer
> > value = UGETW(std->req.wValue);
> > index = UGETW(std->req.wIndex);
> >
> > - use_polling = mtx_owned(xfer->priv_mtx) ? 1 : 0;
> > + use_polling = mtx_owned(xfer->xfer_mtx) ? 1 : 0;
> >
> > /* demultiplex the control request */
> >
> >
> > Modified: head/sys/dev/usb2/controller/at91dci_atmelarm.c
> > ==============================================================================
> > --- head/sys/dev/usb2/controller/at91dci_atmelarm.c Mon Nov 10 18:24:11 2008 (r184823)
> > +++ head/sys/dev/usb2/controller/at91dci_atmelarm.c Mon Nov 10 20:54:31 2008 (r184824)
> > @@ -210,7 +210,7 @@ at91_udp_attach(device_t dev)
> > device_set_ivars(sc->sc_dci.sc_bus.bdev, &sc->sc_dci.sc_bus);
> >
> > err = usb2_config_td_setup(&sc->sc_dci.sc_config_td, sc,
> > - &sc->sc_dci.sc_bus.mtx, NULL, 0, 4);
> > + &sc->sc_dci.sc_bus.bus_mtx, NULL, 0, 4);
> > if (err) {
> > device_printf(dev, "could not setup config thread!\n");
> > goto error;
> >
> > Modified: head/sys/dev/usb2/controller/ehci2.c
> > ==============================================================================
> > --- head/sys/dev/usb2/controller/ehci2.c Mon Nov 10 18:24:11 2008 (r184823)
> > +++ head/sys/dev/usb2/controller/ehci2.c Mon Nov 10 20:54:31 2008 (r184824)
> > @@ -164,7 +164,7 @@ ehci_hc_reset(ehci_softc_t *sc)
> > EOWRITE4(sc, EHCI_USBCMD, 0); /* Halt controller */
> >
> > for (n = 0; n != 100; n++) {
> > - usb2_pause_mtx(&sc->sc_bus.mtx, 1);
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx, 1);
> > hcr = EOREAD4(sc, EHCI_USBSTS);
> > if (hcr & EHCI_STS_HCH) {
> > hcr = 0;
> > @@ -180,7 +180,7 @@ ehci_hc_reset(ehci_softc_t *sc)
> >
> > EOWRITE4(sc, EHCI_USBCMD, EHCI_CMD_HCRESET);
> > for (n = 0; n != 100; n++) {
> > - usb2_pause_mtx(&sc->sc_bus.mtx, 1);
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx, 1);
> > hcr = EOREAD4(sc, EHCI_USBCMD);
> > if (!(hcr & EHCI_CMD_HCRESET)) {
> > hcr = 0;
> > @@ -208,11 +208,11 @@ ehci_init(ehci_softc_t *sc)
> > uint16_t bit;
> > usb2_error_t err = 0;
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > DPRINTF("start\n");
> >
> > - usb2_callout_init_mtx(&sc->sc_tmo_pcd, &sc->sc_bus.mtx,
> > + usb2_callout_init_mtx(&sc->sc_tmo_pcd, &sc->sc_bus.bus_mtx,
> > CALLOUT_RETURNUNLOCKED);
> >
> > #if USB_DEBUG
> > @@ -465,7 +465,7 @@ ehci_init(ehci_softc_t *sc)
> > EOWRITE4(sc, EHCI_CONFIGFLAG, EHCI_CONF_CF);
> >
> > for (i = 0; i < 100; i++) {
> > - usb2_pause_mtx(&sc->sc_bus.mtx, 1);
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx, 1);
> > hcr = EOREAD4(sc, EHCI_USBSTS) & EHCI_STS_HCH;
> > if (!hcr) {
> > break;
> > @@ -477,7 +477,7 @@ ehci_init(ehci_softc_t *sc)
> > goto done;
> > }
> > done:
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > if (!err) {
> > /* catch any lost interrupts */
> > @@ -492,7 +492,7 @@ done:
> > void
> > ehci_detach(struct ehci_softc *sc)
> > {
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > usb2_callout_stop(&sc->sc_tmo_pcd);
> >
> > @@ -502,9 +502,9 @@ ehci_detach(struct ehci_softc *sc)
> > DPRINTF("reset failed!\n");
> > }
> > /* XXX let stray task complete */
> > - usb2_pause_mtx(&sc->sc_bus.mtx, 50);
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx, 50);
> >
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > usb2_callout_drain(&sc->sc_tmo_pcd);
> >
> > @@ -518,7 +518,7 @@ ehci_suspend(struct ehci_softc *sc)
> > uint32_t hcr;
> > uint8_t i;
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > for (i = 1; i <= sc->sc_noport; i++) {
> > cmd = EOREAD4(sc, EHCI_PORTSC(i));
> > @@ -541,7 +541,7 @@ ehci_suspend(struct ehci_softc *sc)
> > if (hcr == 0) {
> > break;
> > }
> > - usb2_pause_mtx(&sc->sc_bus.mtx, 1);
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx, 1);
> > }
> >
> > if (hcr != 0) {
> > @@ -555,14 +555,14 @@ ehci_suspend(struct ehci_softc *sc)
> > if (hcr == EHCI_STS_HCH) {
> > break;
> > }
> > - usb2_pause_mtx(&sc->sc_bus.mtx, 1);
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx, 1);
> > }
> >
> > if (hcr != EHCI_STS_HCH) {
> > device_printf(sc->sc_bus.bdev,
> > "config timeout\n");
> > }
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> > return;
> > }
> >
> > @@ -574,7 +574,7 @@ ehci_resume(struct ehci_softc *sc)
> > uint32_t hcr;
> > uint8_t i;
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > /* restore things in case the bios doesn't */
> > EOWRITE4(sc, EHCI_CTRLDSSEGMENT, 0);
> > @@ -599,7 +599,7 @@ ehci_resume(struct ehci_softc *sc)
> > }
> >
> > if (hcr) {
> > - usb2_pause_mtx(&sc->sc_bus.mtx,
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx,
> > USB_RESUME_WAIT);
> >
> > for (i = 1; i <= sc->sc_noport; i++) {
> > @@ -618,15 +618,15 @@ ehci_resume(struct ehci_softc *sc)
> > if (hcr != EHCI_STS_HCH) {
> > break;
> > }
> > - usb2_pause_mtx(&sc->sc_bus.mtx, 1);
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx, 1);
> > }
> > if (hcr == EHCI_STS_HCH) {
> > device_printf(sc->sc_bus.bdev, "config timeout\n");
> > }
> > - usb2_pause_mtx(&sc->sc_bus.mtx,
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx,
> > USB_RESUME_WAIT);
> >
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > /* catch any lost interrupts */
> > ehci_do_poll(&sc->sc_bus);
> > @@ -639,12 +639,12 @@ ehci_shutdown(ehci_softc_t *sc)
> > {
> > DPRINTF("stopping the HC\n");
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > if (ehci_hc_reset(sc)) {
> > DPRINTF("reset failed!\n");
> > }
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> > }
> >
> > #if USB_DEBUG
> > @@ -1415,7 +1415,7 @@ transferred:
> > static void
> > ehci_pcd_enable(ehci_softc_t *sc)
> > {
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > sc->sc_eintrs |= EHCI_STS_PCD;
> > EOWRITE4(sc, EHCI_USBINTR, sc->sc_eintrs);
> > @@ -1426,7 +1426,7 @@ ehci_pcd_enable(ehci_softc_t *sc)
> > usb2_sw_transfer(&sc->sc_root_intr,
> > &ehci_root_intr_done);
> >
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> > return;
> > }
> >
> > @@ -1460,7 +1460,7 @@ ehci_interrupt(ehci_softc_t *sc)
> > {
> > uint32_t status;
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > DPRINTFN(16, "real interrupt\n");
> >
> > @@ -1517,7 +1517,7 @@ ehci_interrupt(ehci_softc_t *sc)
> > ehci_interrupt_poll(sc);
> >
> > done:
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> > return;
> > }
> >
> > @@ -1532,12 +1532,12 @@ ehci_timeout(void *arg)
> >
> > DPRINTF("xfer=%p\n", xfer);
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > /* transfer is transferred */
> > ehci_device_done(xfer, USB_ERR_TIMEOUT);
> >
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > return;
> > }
> > @@ -1547,10 +1547,10 @@ ehci_do_poll(struct usb2_bus *bus)
> > {
> > struct ehci_softc *sc = EHCI_BUS2SC(bus);
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> > ehci_interrupt_poll(sc);
> > ehci_root_ctrl_poll(sc);
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> > return;
> > }
> >
> > @@ -1965,7 +1965,7 @@ ehci_root_intr_done(struct usb2_xfer *xf
> > uint16_t i;
> > uint16_t m;
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > if (std->state != USB_SW_TR_PRE_DATA) {
> > if (std->state == USB_SW_TR_PRE_CALLBACK) {
> > @@ -2124,7 +2124,7 @@ ehci_device_done(struct usb2_xfer *xfer,
> > struct usb2_pipe_methods *methods = xfer->pipe->methods;
> > ehci_softc_t *sc = xfer->usb2_sc;
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > DPRINTFN(2, "xfer=%p, pipe=%p, error=%d\n",
> > xfer, xfer->pipe, error);
> > @@ -3076,7 +3076,7 @@ ehci_root_ctrl_done(struct usb2_xfer *xf
> > uint8_t l;
> > uint8_t use_polling;
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > if (std->state != USB_SW_TR_SETUP) {
> > if (std->state == USB_SW_TR_PRE_CALLBACK) {
> > @@ -3092,7 +3092,7 @@ ehci_root_ctrl_done(struct usb2_xfer *xf
> > value = UGETW(std->req.wValue);
> > index = UGETW(std->req.wIndex);
> >
> > - use_polling = mtx_owned(xfer->priv_mtx) ? 1 : 0;
> > + use_polling = mtx_owned(xfer->xfer_mtx) ? 1 : 0;
> >
> > DPRINTFN(3, "type=0x%02x request=0x%02x wLen=0x%04x "
> > "wValue=0x%04x wIndex=0x%04x\n",
> > @@ -3373,7 +3373,7 @@ ehci_root_ctrl_done(struct usb2_xfer *xf
> > DELAY(USB_PORT_ROOT_RESET_DELAY * 1000);
> > } else {
> > /* Wait for reset to complete. */
> > - usb2_pause_mtx(&sc->sc_bus.mtx,
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx,
> > USB_PORT_ROOT_RESET_DELAY);
> > }
> >
> > @@ -3385,7 +3385,7 @@ ehci_root_ctrl_done(struct usb2_xfer *xf
> > DELAY(EHCI_PORT_RESET_COMPLETE * 1000);
> > } else {
> > /* Wait for HC to complete reset. */
> > - usb2_pause_mtx(&sc->sc_bus.mtx,
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx,
> > EHCI_PORT_RESET_COMPLETE);
> > }
> >
> >
> > Modified: head/sys/dev/usb2/controller/ehci2_pci.c
> > ==============================================================================
> > --- head/sys/dev/usb2/controller/ehci2_pci.c Mon Nov 10 18:24:11 2008 (r184823)
> > +++ head/sys/dev/usb2/controller/ehci2_pci.c Mon Nov 10 20:54:31 2008 (r184824)
> > @@ -337,7 +337,7 @@ ehci_pci_attach(device_t self)
> > sprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self));
> > }
> >
> > - err = usb2_config_td_setup(&sc->sc_config_td, sc, &sc->sc_bus.mtx,
> > + err = usb2_config_td_setup(&sc->sc_config_td, sc, &sc->sc_bus.bus_mtx,
> > NULL, 0, 4);
> > if (err) {
> > device_printf(self, "could not setup config thread!\n");
> >
> > Modified: head/sys/dev/usb2/controller/musb2_otg.c
> > ==============================================================================
> > --- head/sys/dev/usb2/controller/musb2_otg.c Mon Nov 10 18:24:11 2008 (r184823)
> > +++ head/sys/dev/usb2/controller/musb2_otg.c Mon Nov 10 20:54:31 2008 (r184824)
> > @@ -221,7 +221,7 @@ musbotg_wakeup_peer(struct usb2_xfer *xf
> > if (!(sc->sc_flags.status_suspend)) {
> > return;
> > }
> > - use_polling = mtx_owned(xfer->priv_mtx) ? 1 : 0;
> > + use_polling = mtx_owned(xfer->xfer_mtx) ? 1 : 0;
> >
> > temp = MUSB2_READ_1(sc, MUSB2_REG_POWER);
> > temp |= MUSB2_MASK_RESUME;
> > @@ -233,7 +233,7 @@ musbotg_wakeup_peer(struct usb2_xfer *xf
> > DELAY(8000);
> > } else {
> > /* Wait for reset to complete. */
> > - usb2_pause_mtx(&sc->sc_bus.mtx, 8);
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx, 8);
> > }
> >
> > temp = MUSB2_READ_1(sc, MUSB2_REG_POWER);
> > @@ -982,7 +982,7 @@ musbotg_vbus_interrupt(struct usb2_bus *
> >
> > DPRINTFN(4, "vbus = %u\n", is_on);
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> > if (is_on) {
> > if (!sc->sc_flags.status_vbus) {
> > sc->sc_flags.status_vbus = 1;
> > @@ -1007,7 +1007,7 @@ musbotg_vbus_interrupt(struct usb2_bus *
> > }
> > }
> >
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > return;
> > }
> > @@ -1021,7 +1021,7 @@ musbotg_interrupt(struct musbotg_softc *
> > uint8_t temp;
> > uint8_t to = 2;
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > repeat:
> >
> > @@ -1116,7 +1116,7 @@ repeat:
> > if (--to)
> > goto repeat;
> >
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > return;
> > }
> > @@ -1273,12 +1273,12 @@ musbotg_timeout(void *arg)
> >
> > DPRINTFN(1, "xfer=%p\n", xfer);
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > /* transfer is transferred */
> > musbotg_device_done(xfer, USB_ERR_TIMEOUT);
> >
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > return;
> > }
> > @@ -1356,7 +1356,7 @@ musbotg_root_intr_done(struct usb2_xfer
> >
> > DPRINTFN(8, "\n");
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > if (std->state != USB_SW_TR_PRE_DATA) {
> > if (std->state == USB_SW_TR_PRE_CALLBACK) {
> > @@ -1516,7 +1516,7 @@ musbotg_set_stall(struct usb2_device *ud
> > struct musbotg_softc *sc;
> > uint8_t ep_no;
> >
> > - mtx_assert(&udev->bus->mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
> >
> > DPRINTFN(4, "pipe=%p\n", pipe);
> >
> > @@ -1702,7 +1702,7 @@ musbotg_clear_stall(struct usb2_device *
> >
> > DPRINTFN(4, "pipe=%p\n", pipe);
> >
> > - mtx_assert(&udev->bus->mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
> >
> > /* check mode */
> > if (udev->flags.usb2_mode != USB_MODE_DEVICE) {
> > @@ -1741,7 +1741,7 @@ musbotg_init(struct musbotg_softc *sc)
> > sc->sc_bus.usbrev = USB_REV_2_0;
> > sc->sc_bus.methods = &musbotg_bus_methods;
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > /* turn on clocks */
> >
> > @@ -1749,7 +1749,7 @@ musbotg_init(struct musbotg_softc *sc)
> > (sc->sc_clocks_on) (sc->sc_clocks_arg);
> > }
> > /* wait a little for things to stabilise */
> > - usb2_pause_mtx(&sc->sc_bus.mtx, 1);
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx, 1);
> >
> > /* disable all interrupts */
> >
> > @@ -1762,7 +1762,7 @@ musbotg_init(struct musbotg_softc *sc)
> > musbotg_pull_common(sc, 0);
> >
> > /* wait a little bit (10ms) */
> > - usb2_pause_mtx(&sc->sc_bus.mtx, 10);
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx, 10);
> >
> > /* disable double packet buffering */
> > MUSB2_WRITE_2(sc, MUSB2_REG_RXDBDIS, 0xFFFF);
> > @@ -1871,7 +1871,7 @@ musbotg_init(struct musbotg_softc *sc)
> >
> > musbotg_clocks_off(sc);
> >
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > /* catch any lost interrupts */
> >
> > @@ -1883,7 +1883,7 @@ musbotg_init(struct musbotg_softc *sc)
> > void
> > musbotg_uninit(struct musbotg_softc *sc)
> > {
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > /* disable all interrupts */
> > MUSB2_WRITE_1(sc, MUSB2_REG_INTUSBE, 0);
> > @@ -1899,7 +1899,7 @@ musbotg_uninit(struct musbotg_softc *sc)
> >
> > musbotg_pull_down(sc);
> > musbotg_clocks_off(sc);
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > return;
> > }
> > @@ -1921,10 +1921,10 @@ musbotg_do_poll(struct usb2_bus *bus)
> > {
> > struct musbotg_softc *sc = MUSBOTG_BUS2SC(bus);
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> > musbotg_interrupt_poll(sc);
> > musbotg_root_ctrl_poll(sc);
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> > return;
> > }
> >
> > @@ -2293,7 +2293,7 @@ musbotg_root_ctrl_done(struct usb2_xfer
> > uint16_t index;
> > uint8_t use_polling;
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > if (std->state != USB_SW_TR_SETUP) {
> > if (std->state == USB_SW_TR_PRE_CALLBACK) {
> > @@ -2309,7 +2309,7 @@ musbotg_root_ctrl_done(struct usb2_xfer
> > value = UGETW(std->req.wValue);
> > index = UGETW(std->req.wIndex);
> >
> > - use_polling = mtx_owned(xfer->priv_mtx) ? 1 : 0;
> > + use_polling = mtx_owned(xfer->xfer_mtx) ? 1 : 0;
> >
> > /* demultiplex the control request */
> >
> >
> > Modified: head/sys/dev/usb2/controller/musb2_otg_atmelarm.c
> > ==============================================================================
> > --- head/sys/dev/usb2/controller/musb2_otg_atmelarm.c Mon Nov 10 18:24:11 2008 (r184823)
> > +++ head/sys/dev/usb2/controller/musb2_otg_atmelarm.c Mon Nov 10 20:54:31 2008 (r184824)
> > @@ -138,7 +138,7 @@ musbotg_attach(device_t dev)
> > device_set_ivars(sc->sc_otg.sc_bus.bdev, &sc->sc_otg.sc_bus);
> >
> > err = usb2_config_td_setup(&sc->sc_otg.sc_config_td, sc,
> > - &sc->sc_otg.sc_bus.mtx, NULL, 0, 4);
> > + &sc->sc_otg.sc_bus.bus_mtx, NULL, 0, 4);
> > if (err) {
> > device_printf(dev, "could not setup config thread!\n");
> > goto error;
> >
> > Modified: head/sys/dev/usb2/controller/ohci2.c
> > ==============================================================================
> > --- head/sys/dev/usb2/controller/ohci2.c Mon Nov 10 18:24:11 2008 (r184823)
> > +++ head/sys/dev/usb2/controller/ohci2.c Mon Nov 10 20:54:31 2008 (r184824)
> > @@ -173,7 +173,7 @@ ohci_controller_init(ohci_softc_t *sc)
> > DPRINTF("SMM active, request owner change\n");
> > OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_OCR);
> > for (i = 0; (i < 100) && (ctl & OHCI_IR); i++) {
> > - usb2_pause_mtx(&sc->sc_bus.mtx, 1);
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx, 1);
> > ctl = OREAD4(sc, OHCI_CONTROL);
> > }
> > if (ctl & OHCI_IR) {
> > @@ -186,7 +186,7 @@ ohci_controller_init(ohci_softc_t *sc)
> > DPRINTF("cold started\n");
> > reset:
> > /* controller was cold started */
> > - usb2_pause_mtx(&sc->sc_bus.mtx,
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx,
> > USB_BUS_RESET_DELAY);
> > }
> >
> > @@ -197,7 +197,7 @@ reset:
> > DPRINTF("%s: resetting\n", device_get_nameunit(sc->sc_bus.bdev));
> > OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET);
> >
> > - usb2_pause_mtx(&sc->sc_bus.mtx,
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx,
> > USB_BUS_RESET_DELAY);
> >
> > /* we now own the host controller and the bus has been reset */
> > @@ -260,7 +260,7 @@ reset:
> > desca = OREAD4(sc, OHCI_RH_DESCRIPTOR_A);
> > OWRITE4(sc, OHCI_RH_DESCRIPTOR_A, desca | OHCI_NOCP);
> > OWRITE4(sc, OHCI_RH_STATUS, OHCI_LPSC); /* Enable port power */
> > - usb2_pause_mtx(&sc->sc_bus.mtx,
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx,
> > OHCI_ENABLE_POWER_DELAY);
> > OWRITE4(sc, OHCI_RH_DESCRIPTOR_A, desca);
> >
> > @@ -270,7 +270,7 @@ reset:
> > */
> > sc->sc_noport = 0;
> > for (i = 0; (i < 10) && (sc->sc_noport == 0); i++) {
> > - usb2_pause_mtx(&sc->sc_bus.mtx,
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx,
> > OHCI_READ_DESC_DELAY);
> > sc->sc_noport = OHCI_GET_NDP(OREAD4(sc, OHCI_RH_DESCRIPTOR_A));
> > }
> > @@ -309,7 +309,7 @@ ohci_init(ohci_softc_t *sc)
> > uint16_t x;
> > uint16_t y;
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > DPRINTF("start\n");
> >
> > @@ -391,7 +391,7 @@ ohci_init(ohci_softc_t *sc)
> > /* set up the bus struct */
> > sc->sc_bus.methods = &ohci_bus_methods;
> >
> > - usb2_callout_init_mtx(&sc->sc_tmo_rhsc, &sc->sc_bus.mtx,
> > + usb2_callout_init_mtx(&sc->sc_tmo_rhsc, &sc->sc_bus.bus_mtx,
> > CALLOUT_RETURNUNLOCKED);
> >
> > #if USB_DEBUG
> > @@ -408,10 +408,10 @@ ohci_init(ohci_softc_t *sc)
> > sc->sc_bus.usbrev = USB_REV_1_0;
> >
> > if (ohci_controller_init(sc)) {
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> > return (USB_ERR_INVAL);
> > } else {
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> > /* catch any lost interrupts */
> > ohci_do_poll(&sc->sc_bus);
> > return (USB_ERR_NORMAL_COMPLETION);
> > @@ -424,7 +424,7 @@ ohci_init(ohci_softc_t *sc)
> > void
> > ohci_detach(struct ohci_softc *sc)
> > {
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > usb2_callout_stop(&sc->sc_tmo_rhsc);
> >
> > @@ -432,9 +432,9 @@ ohci_detach(struct ohci_softc *sc)
> > OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET);
> >
> > /* XXX let stray task complete */
> > - usb2_pause_mtx(&sc->sc_bus.mtx, 50);
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx, 50);
> >
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > usb2_callout_drain(&sc->sc_tmo_rhsc);
> >
> > @@ -449,7 +449,7 @@ ohci_suspend(ohci_softc_t *sc)
> > {
> > uint32_t ctl;
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > #if USB_DEBUG
> > DPRINTF("\n");
> > @@ -470,10 +470,10 @@ ohci_suspend(ohci_softc_t *sc)
> > ctl |= OHCI_HCFS_SUSPEND;
> > OWRITE4(sc, OHCI_CONTROL, ctl);
> >
> > - usb2_pause_mtx(&sc->sc_bus.mtx,
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx,
> > USB_RESUME_WAIT);
> >
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> > return;
> > }
> >
> > @@ -482,7 +482,7 @@ ohci_resume(ohci_softc_t *sc)
> > {
> > uint32_t ctl;
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > #if USB_DEBUG
> > DPRINTF("\n");
> > @@ -503,13 +503,13 @@ ohci_resume(ohci_softc_t *sc)
> > ctl = OREAD4(sc, OHCI_CONTROL);
> > ctl |= OHCI_HCFS_RESUME;
> > OWRITE4(sc, OHCI_CONTROL, ctl);
> > - usb2_pause_mtx(&sc->sc_bus.mtx, USB_RESUME_DELAY);
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx, USB_RESUME_DELAY);
> > ctl = (ctl & ~OHCI_HCFS_MASK) | OHCI_HCFS_OPERATIONAL;
> > OWRITE4(sc, OHCI_CONTROL, ctl);
> > - usb2_pause_mtx(&sc->sc_bus.mtx, USB_RESUME_RECOVERY);
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx, USB_RESUME_RECOVERY);
> > sc->sc_control = sc->sc_intre = 0;
> >
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > /* catch any lost interrupts */
> > ohci_do_poll(&sc->sc_bus);
> > @@ -699,7 +699,7 @@ _ohci_append_qh(ohci_ed_t *sed, uint32_t
> > {
> > DPRINTFN(11, "%p to %p\n", sed, last);
> >
> > - /* (sc->sc_bus.mtx) must be locked */
> > + /* (sc->sc_bus.bus_mtx) must be locked */
> >
> > sed->next = last->next;
> > sed->ed_next = last->ed_next;
> > @@ -728,7 +728,7 @@ _ohci_remove_qh(ohci_ed_t *sed, ohci_ed_
> > {
> > DPRINTFN(11, "%p from %p\n", sed, last);
> >
> > - /* (sc->sc_bus.mtx) must be locked */
> > + /* (sc->sc_bus.bus_mtx) must be locked */
> >
> > /* only remove if not removed from a queue */
> > if (sed->prev) {
> > @@ -1099,7 +1099,7 @@ ohci_rhsc_enable(ohci_softc_t *sc)
> > {
> > DPRINTFN(5, "\n");
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > sc->sc_eintrs |= OHCI_RHSC;
> > OWRITE4(sc, OHCI_INTERRUPT_ENABLE, OHCI_RHSC);
> > @@ -1110,7 +1110,7 @@ ohci_rhsc_enable(ohci_softc_t *sc)
> > usb2_sw_transfer(&sc->sc_root_intr,
> > &ohci_root_intr_done);
> >
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> > return;
> > }
> >
> > @@ -1146,7 +1146,7 @@ ohci_interrupt(ohci_softc_t *sc)
> > uint32_t status;
> > uint32_t done;
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> >
> > hcca = ohci_get_hcca(sc);
> >
> > @@ -1246,7 +1246,7 @@ ohci_interrupt(ohci_softc_t *sc)
> > ohci_interrupt_poll(sc);
> >
> > done:
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> > return;
> > }
> >
> > @@ -1261,12 +1261,12 @@ ohci_timeout(void *arg)
> >
> > DPRINTF("xfer=%p\n", xfer);
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > /* transfer is transferred */
> > ohci_device_done(xfer, USB_ERR_TIMEOUT);
> >
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> >
> > return;
> > }
> > @@ -1276,10 +1276,10 @@ ohci_do_poll(struct usb2_bus *bus)
> > {
> > struct ohci_softc *sc = OHCI_BUS2SC(bus);
> >
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> > ohci_interrupt_poll(sc);
> > ohci_root_ctrl_poll(sc);
> > - mtx_unlock(&sc->sc_bus.mtx);
> > + USB_BUS_UNLOCK(&sc->sc_bus);
> > return;
> > }
> >
> > @@ -1617,7 +1617,7 @@ ohci_root_intr_done(struct usb2_xfer *xf
> > uint16_t i;
> > uint16_t m;
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > if (std->state != USB_SW_TR_PRE_DATA) {
> > if (std->state == USB_SW_TR_PRE_CALLBACK) {
> > @@ -1663,7 +1663,7 @@ ohci_device_done(struct usb2_xfer *xfer,
> > ohci_softc_t *sc = xfer->usb2_sc;
> > ohci_ed_t *ed;
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> >
> > DPRINTFN(2, "xfer=%p, pipe=%p, error=%d\n",
> > @@ -2198,7 +2198,7 @@ ohci_root_ctrl_done(struct usb2_xfer *xf
> > uint8_t l;
> > uint8_t use_polling;
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > if (std->state != USB_SW_TR_SETUP) {
> > if (std->state == USB_SW_TR_PRE_CALLBACK) {
> > @@ -2214,7 +2214,7 @@ ohci_root_ctrl_done(struct usb2_xfer *xf
> > value = UGETW(std->req.wValue);
> > index = UGETW(std->req.wIndex);
> >
> > - use_polling = mtx_owned(xfer->priv_mtx) ? 1 : 0;
> > + use_polling = mtx_owned(xfer->xfer_mtx) ? 1 : 0;
> >
> > DPRINTFN(3, "type=0x%02x request=0x%02x wLen=0x%04x "
> > "wValue=0x%04x wIndex=0x%04x\n",
> > @@ -2375,7 +2375,7 @@ ohci_root_ctrl_done(struct usb2_xfer *xf
> > /* enable RHSC interrupt if condition is cleared. */
> > if ((OREAD4(sc, port) >> 16) == 0) {
> > ohci_rhsc_enable(sc);
> > - mtx_lock(&sc->sc_bus.mtx);
> > + USB_BUS_LOCK(&sc->sc_bus);
> > }
> > break;
> > default:
> > @@ -2456,7 +2456,7 @@ ohci_root_ctrl_done(struct usb2_xfer *xf
> > /* polling */
> > DELAY(USB_PORT_ROOT_RESET_DELAY * 1000);
> > } else {
> > - usb2_pause_mtx(&sc->sc_bus.mtx,
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx,
> > USB_PORT_ROOT_RESET_DELAY);
> > }
> >
> >
> > Modified: head/sys/dev/usb2/controller/ohci2_atmelarm.c
> > ==============================================================================
> > --- head/sys/dev/usb2/controller/ohci2_atmelarm.c Mon Nov 10 18:24:11 2008 (r184823)
> > +++ head/sys/dev/usb2/controller/ohci2_atmelarm.c Mon Nov 10 20:54:31 2008 (r184824)
> > @@ -111,7 +111,7 @@ ohci_atmelarm_attach(device_t dev)
> > strlcpy(sc->sc_ohci.sc_vendor, "Atmel", sizeof(sc->sc_ohci.sc_vendor));
> >
> > err = usb2_config_td_setup(&sc->sc_ohci.sc_config_td, sc,
> > - &sc->sc_ohci.sc_bus.mtx, NULL, 0, 4);
> > + &sc->sc_ohci.sc_bus.bus_mtx, NULL, 0, 4);
> > if (err) {
> > device_printf(dev, "could not setup config thread!\n");
> > goto error;
> >
> > Modified: head/sys/dev/usb2/controller/ohci2_pci.c
> > ==============================================================================
> > --- head/sys/dev/usb2/controller/ohci2_pci.c Mon Nov 10 18:24:11 2008 (r184823)
> > +++ head/sys/dev/usb2/controller/ohci2_pci.c Mon Nov 10 20:54:31 2008 (r184824)
> > @@ -280,7 +280,7 @@ ohci_pci_attach(device_t self)
> > sprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self));
> > }
> >
> > - err = usb2_config_td_setup(&sc->sc_config_td, sc, &sc->sc_bus.mtx,
> > + err = usb2_config_td_setup(&sc->sc_config_td, sc, &sc->sc_bus.bus_mtx,
> > NULL, 0, 4);
> > if (err) {
> > device_printf(self, "could not setup config thread!\n");
> >
> > Modified: head/sys/dev/usb2/controller/uhci2.c
> > ==============================================================================
> > --- head/sys/dev/usb2/controller/uhci2.c Mon Nov 10 18:24:11 2008 (r184823)
> > +++ head/sys/dev/usb2/controller/uhci2.c Mon Nov 10 20:54:31 2008 (r184824)
> > @@ -265,7 +265,7 @@ uhci_reset(uhci_softc_t *sc)
> > struct usb2_page_search buf_res;
> > uint16_t n;
> >
> > - mtx_assert(&sc->sc_bus.mtx, MA_OWNED);
> > + USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
> >
> > DPRINTF("resetting the HC\n");
> >
> > @@ -279,7 +279,7 @@ uhci_reset(uhci_softc_t *sc)
> >
> > /* wait */
> >
> > - usb2_pause_mtx(&sc->sc_bus.mtx,
> > + usb2_pause_mtx(&sc->sc_bus.bus_mtx,
> > USB_BUS_RESET_DELAY);
> >
> > /* terminate all transfers */
> >
> > *** DIFF OUTPUT TRUNCATED AT 1000 LINES ***
>
> --
> - Alfred Perlstein
More information about the svn-src-head
mailing list