svn commit: r235661 - head/sys/mips/conf
Adrian Chadd
adrian at FreeBSD.org
Sat May 19 20:11:19 UTC 2012
Author: adrian
Date: Sat May 19 20:11:18 2012
New Revision: 235661
URL: http://svn.freebsd.org/changeset/base/235661
Log:
Enable the AR8316 switch on the routerstation pro board.
The configuration is:
* RGMII, both ports
* arge0 - connected to PHY4 as a dedicated port (CPU port)
* arge1 - connected to the switch ports
I've verified this on my routerstation pro board.
Modified:
head/sys/mips/conf/RSPRO
head/sys/mips/conf/RSPRO.hints
Modified: head/sys/mips/conf/RSPRO
==============================================================================
--- head/sys/mips/conf/RSPRO Sat May 19 20:05:27 2012 (r235660)
+++ head/sys/mips/conf/RSPRO Sat May 19 20:11:18 2012 (r235661)
@@ -21,6 +21,12 @@ options GEOM_PART_BSD
options GEOM_PART_MBR
options MSDOSFS
+# For etherswitch support
+options ARGE_MDIO
+device miiproxy
+device etherswitch
+device arswitch
+
# Boot off of flash
options ROOTDEVNAME=\"ufs:redboot/rootfs.uzip\"
Modified: head/sys/mips/conf/RSPRO.hints
==============================================================================
--- head/sys/mips/conf/RSPRO.hints Sat May 19 20:05:27 2012 (r235660)
+++ head/sys/mips/conf/RSPRO.hints Sat May 19 20:11:18 2012 (r235661)
@@ -1,10 +1,27 @@
# $FreeBSD$
-hint.arge.0.phymask=0x10
-
-hint.arge.1.media=1000
-hint.arge.1.fduplex=1
-hint.arge.1.phymask=0x0e
+# arge0 mdio bus
+hint.argemdio.0.at="nexus0"
+hint.argemdio.0.maddr=0x19000000
+hint.argemdio.0.msize=0x1000
+hint.argemdio.0.order=0
+
+# arge0: dedicated switch port
+hint.arge.0.phymask=0x10 # PHY4
+hint.arge.0.miimode=3 # RGMII
+hint.arge.0.mdio=mdioproxy1 # .. off of the switch mdiobus
+
+# arge1: nail to 1000/full, RGMII - connected to the switch
+hint.arge.1.media=1000 # Map to 1000/full
+hint.arge.1.fduplex=1 #
+hint.arge.1.phymask=0x0 # no directly mapped PHYs
+hint.arge.1.miimode=3 # RGMII
+
+hint.arswitch.0.is_7240=0
+hint.arswitch.0.numphys=4
+hint.arswitch.0.phy4cpu=1
+hint.arswitch.0.is_rgmii=1
+hint.arswitch.0.is_gmii=0
# Don't flip on anything that isn't already enabled.
# This includes leaving the SPI CS1/CS2 pins as GPIO pins as they're
More information about the svn-src-all
mailing list