svn commit: r213340 - head/sys/mips/conf
Juli Mallett
jmallett at FreeBSD.org
Sat Oct 2 01:24:21 UTC 2010
Author: jmallett
Date: Sat Oct 2 01:24:20 2010
New Revision: 213340
URL: http://svn.freebsd.org/changeset/base/213340
Log:
Make the OCTEON1 configuration look like a normal GENERIC configuration. In
particular, add PCI and USB buses and most devices. Also move to using ULE,
adding INET6, turning on WITNESS by default, etc.
Modified:
head/sys/mips/conf/OCTEON1
Modified: head/sys/mips/conf/OCTEON1
==============================================================================
--- head/sys/mips/conf/OCTEON1 Sat Oct 2 00:57:41 2010 (r213339)
+++ head/sys/mips/conf/OCTEON1 Sat Oct 2 01:24:20 2010 (r213340)
@@ -1,7 +1,8 @@
-# OCTEON1 -- Configuration kernel for all Octeon1 SoCs from Cavium Networks
#
-# For more information on this file, please read the handbook section on
-# Kernel Configuration Files:
+# OCTEON1 -- Generic kernel configuration file for FreeBSD/MIPS on Cavium Octeon
+#
+# For more information on this file, please read the config(5) manual page,
+# and/or the handbook section on Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
@@ -11,19 +12,12 @@
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
-# device lines is also present in the ../../conf/NOTES and NOTES files.
-# If you are in doubt as to the purpose or necessity of a line, check first
+# device lines is also present in the ../../conf/NOTES and NOTES files.
+# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD$
-##############################################################################
-### ###
-### PLEASE NOTE: This file is the experimental 64-bit kernel. If you want ###
-### a stable kernel, please use the 32-bit OCTEON1-32 instead. ###
-### ###
-##############################################################################
-
machine mips
cpu CPU_CNMIPS
ident OCTEON1
@@ -42,61 +36,261 @@ hints "OCTEON1.hints" #Default places
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
-#XXXimp: Need to make work with 64-bit too
-options ISA_MIPS64
-
-options DDB
-options KDB
-
-options SCHED_4BSD #4BSD scheduler
-options INET #InterNETworking
-options NFSCLIENT #Network Filesystem Client
-#options NFS_ROOT #NFS usable as /, requires NFSCLIENT
-options PSEUDOFS #Pseudo-filesystem framework
-options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
-#options ROOTDEVNAME=\"ufs:ad0s1a\" # Original
-options NO_SWAPPING
-
-
-options FFS #Berkeley Fast Filesystem
-options SOFTUPDATES #Enable FFS soft updates support
-options UFS_ACL #Support for access control lists
-options UFS_DIRHASH #Improve performance on big directories
-
-
-# Debugging for use in -current
-#options DEADLKRES #Enable the deadlock resolver
-options INVARIANTS #Enable calls of extra sanity checking
-options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
-#options WITNESS #Enable checks to detect deadlocks and cycles
-#options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
-
-options SMP
-
# Board-specific support that cannot be auto-detected at runtime.
#options OCTEON_VENDOR_LANNER # Support for Lanner boards.
#options OCTEON_BOARD_CAPK_0100ND # Support for CAPK-0100nd.
-device loop
-device ether
-device md
-device uart
-nodevice uart_ns8250
-device miibus
-device octe
-#options VERBOSE_SYSINIT
-
-device bpf
-device random
-
-#
-# Use the following for Compact Flash file-system
-device cf
-options ROOTDEVNAME=\"ufs:cf0s2a\" # Unmask if compact flash is needed as RFS
+# XXX This option is very nearly irrelevant.
+options ISA_MIPS64
-#
-# Use the following for RFS in mem-device
-#options MD_ROOT
-#options ROOTDEVNAME=\"ufs:md0\"
+options SCHED_ULE # ULE scheduler
+options PREEMPTION # Enable kernel thread preemption
+options INET # InterNETworking
+options INET6 # IPv6 communications protocols
+options SCTP # Stream Control Transmission Protocol
+options FFS # Berkeley Fast Filesystem
+options SOFTUPDATES # Enable FFS soft updates support
+options UFS_ACL # Support for access control lists
+options UFS_DIRHASH # Improve performance on big directories
+options UFS_GJOURNAL # Enable gjournal-based UFS journaling
+options MD_ROOT # MD is a potential root device
+options NFSCLIENT # Network Filesystem Client
+options NFSSERVER # Network Filesystem Server
+options NFSLOCKD # Network Lock Manager
+options NFS_ROOT # NFS usable as /, requires NFSCLIENT
+options MSDOSFS # MSDOS Filesystem
+options CD9660 # ISO 9660 Filesystem
+options PROCFS # Process filesystem (requires PSEUDOFS)
+options PSEUDOFS # Pseudo-filesystem framework
+options GEOM_PART_GPT # GUID Partition Tables.
+options GEOM_LABEL # Provides labelization
+#options COMPAT_FREEBSD32 # Compatible with o32 binaries (not yet)
+options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
+options KTRACE # ktrace(1) support
+options STACK # stack(9) support
+options SYSVSHM # SYSV-style shared memory
+options SYSVMSG # SYSV-style message queues
+options SYSVSEM # SYSV-style semaphores
+options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
+options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed.
+options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
+options AUDIT # Security event auditing
+options MAC # TrustedBSD MAC Framework
+options FLOWTABLE # per-cpu routing cache
+#options KDTRACE_FRAME # Ensure frames are compiled in
+#options KDTRACE_HOOKS # Kernel DTrace hooks
+options INCLUDE_CONFIG_FILE # Include this file in kernel
+options NO_SWAPPING # Disable support for paging
-#options MD_ROOT_SIZE=21264
+# Debugging for use in -current
+options KDB # Enable kernel debugger support.
+options DDB # Support DDB.
+options GDB # Support remote GDB.
+options DEADLKRES # Enable the deadlock resolver
+options INVARIANTS # Enable calls of extra sanity checking
+options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
+options WITNESS # Enable checks to detect deadlocks and cycles
+options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
+options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones
+
+# Make an SMP-capable kernel by default
+options SMP # Symmetric MultiProcessor Kernel
+
+# Bus support.
+device pci
+
+# ATA and ATAPI devices
+device ata
+device atadisk # ATA disk drives
+device ataraid # ATA RAID drives
+device atapicd # ATAPI CDROM drives
+device atapifd # ATAPI floppy drives
+device atapist # ATAPI tape drives
+options ATA_STATIC_ID # Static device numbering
+
+# On-board Compact Flash driver.
+device cf
+options ROOTDEVNAME=\"ufs:cf0s2a\" # Default root filesystem.
+
+# SCSI Controllers
+device ahc # AHA2940 and onboard AIC7xxx devices
+options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
+ # output. Adds ~128k to driver.
+device ahd # AHA39320/29320 and onboard AIC79xx devices
+options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
+ # output. Adds ~215k to driver.
+device amd # AMD 53C974 (Tekram DC-390(T))
+device hptiop # Highpoint RocketRaid 3xxx series
+device isp # Qlogic family
+#device ispfw # Firmware for QLogic HBAs- normally a module
+device mpt # LSI-Logic MPT-Fusion
+device mps # LSI-Logic MPT-Fusion 2
+#device ncr # NCR/Symbios Logic
+device trm # Tekram DC395U/UW/F DC315U adapters
+
+device adv # Advansys SCSI adapters
+device adw # Advansys wide SCSI adapters
+device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
+device bt # Buslogic/Mylex MultiMaster SCSI adapters
+
+# SCSI peripherals
+device scbus # SCSI bus (required for SCSI)
+device ch # SCSI media changers
+device da # Direct Access (disks)
+device sa # Sequential Access (tape etc)
+device cd # CD
+device pass # Passthrough device (direct SCSI access)
+device ses # SCSI Environmental Services (and SAF-TE)
+
+# RAID controllers interfaced to the SCSI subsystem
+device amr # AMI MegaRAID
+#XXX it is not 64-bit clean, -scottl
+#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
+device ciss # Compaq Smart RAID 5*
+device dpt # DPT Smartcache III, IV - See NOTES for options
+device iir # Intel Integrated RAID
+device ips # IBM (Adaptec) ServeRAID
+device mly # Mylex AcceleRAID/eXtremeRAID
+
+# RAID controllers
+device aac # Adaptec FSA RAID
+device aacp # SCSI passthrough for aac (requires CAM)
+device ida # Compaq Smart RAID
+device mfi # LSI MegaRAID SAS
+device mlx # Mylex DAC960 family
+#XXX pointer/int warnings
+#device pst # Promise Supertrak SX6000
+device twe # 3ware ATA RAID
+
+# PCCARD (PCMCIA) support
+# PCMCIA and cardbus bridge support
+device cbb # cardbus (yenta) bridge
+device pccard # PC Card (16-bit) bus
+device cardbus # CardBus (32-bit) bus
+
+# Serial (COM) ports
+device uart # Generic UART driver
+
+# If you've got a "dumb" serial or parallel PCI card that is
+# supported by the puc(4) glue driver, uncomment the following
+# line to enable it (connects to sio, uart and/or ppc drivers):
+#device puc
+
+# On-board Cavium Octeon Ethernet.
+# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
+device octe
+
+# PCI Ethernet NICs.
+device de # DEC/Intel DC21x4x (``Tulip'')
+device em # Intel PRO/1000 Gigabit Ethernet Family
+device igb # Intel PRO/1000 PCIE Server Gigabit Family
+device ixgbe # Intel PRO/10GbE PCIE Ethernet Family
+device le # AMD Am7900 LANCE and Am79C9xx PCnet
+device ti # Alteon Networks Tigon I/II gigabit Ethernet
+device txp # 3Com 3cR990 (``Typhoon'')
+device vx # 3Com 3c590, 3c595 (``Vortex'')
+
+# PCI Ethernet NICs that use the common MII bus controller code.
+# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
+device miibus # MII bus support
+device ae # Attansic/Atheros L2 FastEthernet
+device age # Attansic/Atheros L1 Gigabit Ethernet
+device alc # Atheros AR8131/AR8132 Ethernet
+device ale # Atheros AR8121/AR8113/AR8114 Ethernet
+device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
+device bfe # Broadcom BCM440x 10/100 Ethernet
+device bge # Broadcom BCM570xx Gigabit Ethernet
+device dc # DEC/Intel 21143 and various workalikes
+device et # Agere ET1310 10/100/Gigabit Ethernet
+device fxp # Intel EtherExpress PRO/100B (82557, 82558)
+device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
+device lge # Level 1 LXT1001 gigabit Ethernet
+device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
+device nge # NatSemi DP83820 gigabit Ethernet
+#device nve # nVidia nForce MCP on-board Ethernet Networking
+device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le')
+device re # RealTek 8139C+/8169/8169S/8110S
+device rl # RealTek 8129/8139
+device sf # Adaptec AIC-6915 (``Starfire'')
+device sge # Silicon Integrated Systems SiS190/191
+device sis # Silicon Integrated Systems SiS 900/SiS 7016
+device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
+device ste # Sundance ST201 (D-Link DFE-550TX)
+device stge # Sundance/Tamarack TC9021 gigabit Ethernet
+device tl # Texas Instruments ThunderLAN
+device tx # SMC EtherPower II (83c170 ``EPIC'')
+device vge # VIA VT612x gigabit Ethernet
+device vr # VIA Rhine, Rhine II
+device wb # Winbond W89C840F
+device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
+
+# Wireless NIC cards
+device wlan # 802.11 support
+options IEEE80211_DEBUG # enable debug msgs
+options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
+options IEEE80211_SUPPORT_MESH # enable 802.11s draft support
+device wlan_wep # 802.11 WEP support
+device wlan_ccmp # 802.11 CCMP support
+device wlan_tkip # 802.11 TKIP support
+device wlan_amrr # AMRR transmit rate control algorithm
+device an # Aironet 4500/4800 802.11 wireless NICs.
+device ath # Atheros pci/cardbus NIC's
+device ath_hal # pci/cardbus chip support
+options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors
+device ath_rate_sample # SampleRate tx rate control for ath
+device ral # Ralink Technology RT2500 wireless NICs.
+device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
+
+# Pseudo devices.
+device loop # Network loopback
+device random # Entropy device
+device ether # Ethernet support
+device vlan # 802.1Q VLAN support
+device tun # Packet tunnel.
+device pty # BSD-style compatibility pseudo ttys
+device md # Memory "disks"
+device gif # IPv6 and IPv4 tunneling
+device faith # IPv6-to-IPv4 relaying (translation)
+device firmware # firmware assist module
+
+# The `bpf' device enables the Berkeley Packet Filter.
+# Be aware of the administrative consequences of enabling this!
+# Note that 'bpf' is required for DHCP.
+device bpf # Berkeley packet filter
+
+# USB support
+options USB_DEBUG # enable debug msgs
+device octusb # Cavium Octeon on-board USB interface (USB 2.0)
+device uhci # UHCI PCI->USB interface
+device ohci # OHCI PCI->USB interface
+device ehci # EHCI PCI->USB interface (USB 2.0)
+device usb # USB Bus (required)
+#device udbp # USB Double Bulk Pipe devices
+device uhid # "Human Interface Devices"
+device ulpt # Printer
+device umass # Disks/Mass storage - Requires scbus and da
+device ums # Mouse
+device urio # Diamond Rio 500 MP3 player
+# USB Serial devices
+device u3g # USB-based 3G modems (Option, Huawei, Sierra)
+device uark # Technologies ARK3116 based serial adapters
+device ubsa # Belkin F5U103 and compatible serial adapters
+device uftdi # For FTDI usb serial adapters
+device uipaq # Some WinCE based devices
+device uplcom # Prolific PL-2303 serial adapters
+device uslcom # SI Labs CP2101/CP2102 serial adapters
+device uvisor # Visor and Palm devices
+device uvscom # USB serial support for DDI pocket's PHS
+# USB Ethernet, requires miibus
+device aue # ADMtek USB Ethernet
+device axe # ASIX Electronics USB Ethernet
+device cdce # Generic USB over Ethernet
+device cue # CATC USB Ethernet
+device kue # Kawasaki LSI USB Ethernet
+device rue # RealTek RTL8150 USB Ethernet
+device udav # Davicom DM9601E USB
+# USB Wireless
+device rum # Ralink Technology RT2501USB wireless NICs
+device uath # Atheros AR5523 wireless NICs
+device ural # Ralink Technology RT2500USB wireless NICs
+device zyd # ZyDAS zb1211/zb1211b wireless NICs
More information about the svn-src-all
mailing list