svn commit: r215000 - stable/7/sys/dev/bge

Pyun YongHyeon yongari at FreeBSD.org
Mon Nov 8 19:54:45 UTC 2010


Author: yongari
Date: Mon Nov  8 19:54:44 2010
New Revision: 215000
URL: http://svn.freebsd.org/changeset/base/215000

Log:
  MFC r214428:
    Add initial BCM5718 family support. The BCM5718 family includes
    the dual port BCM5717 and BCM5718 devices which are intended for
    mainstream workstation and entry-level server designs and
    represents the twelfth generation of NetXtreme Ethernet controllers.
    This family is the successor to the BCM5714/BCM5715 family and
    supports IPv4/IPv6 checksum offloading, TSO, VLAN hardware tagging,
    jumbo frames, MSI/MSIX, IOV, RSS and TSS.
  
    This change set supports all hardware features except IOV and
    RSS/TSS. Unlike its predecessors, only extended RX buffer
    descriptors can be posted to the jumbo producer ring. Single RX
    buffer descriptors for jumbo frame are not supported. RSS requires
    a more substantial set of changes and will apply to a larger set
    of NetXtreme devices so RSS/TSS multi-queue support will be
    implemented in a future releases.
  
    Special thanks to Broadcom who kindly sent a sample board to me
    and to davidch who gave provided the initial support code.
  
    Submitted by:	davidch (initial version)
    HW donated by:	Broadcom

Modified:
  stable/7/sys/dev/bge/if_bge.c
  stable/7/sys/dev/bge/if_bgereg.h
Directory Properties:
  stable/7/sys/   (props changed)
  stable/7/sys/cddl/contrib/opensolaris/   (props changed)
  stable/7/sys/contrib/dev/acpica/   (props changed)
  stable/7/sys/contrib/pf/   (props changed)

Modified: stable/7/sys/dev/bge/if_bge.c
==============================================================================
--- stable/7/sys/dev/bge/if_bge.c	Mon Nov  8 19:53:16 2010	(r214999)
+++ stable/7/sys/dev/bge/if_bge.c	Mon Nov  8 19:54:44 2010	(r215000)
@@ -169,6 +169,8 @@ static const struct bge_type {
 	{ BCOM_VENDORID,	BCOM_DEVICEID_BCM5714S },
 	{ BCOM_VENDORID,	BCOM_DEVICEID_BCM5715 },
 	{ BCOM_VENDORID,	BCOM_DEVICEID_BCM5715S },
+	{ BCOM_VENDORID,	BCOM_DEVICEID_BCM5717 },
+	{ BCOM_VENDORID,	BCOM_DEVICEID_BCM5718 },
 	{ BCOM_VENDORID,	BCOM_DEVICEID_BCM5720 },
 	{ BCOM_VENDORID,	BCOM_DEVICEID_BCM5721 },
 	{ BCOM_VENDORID,	BCOM_DEVICEID_BCM5722 },
@@ -289,6 +291,8 @@ static const struct bge_revision {
 	{ BGE_CHIPID_BCM5715_A0,	"BCM5715 A0" },
 	{ BGE_CHIPID_BCM5715_A1,	"BCM5715 A1" },
 	{ BGE_CHIPID_BCM5715_A3,	"BCM5715 A3" },
+	{ BGE_CHIPID_BCM5717_A0,	"BCM5717 A0" },
+	{ BGE_CHIPID_BCM5717_B0,	"BCM5717 B0" },
 	{ BGE_CHIPID_BCM5755_A0,	"BCM5755 A0" },
 	{ BGE_CHIPID_BCM5755_A1,	"BCM5755 A1" },
 	{ BGE_CHIPID_BCM5755_A2,	"BCM5755 A2" },
@@ -332,6 +336,7 @@ static const struct bge_revision bge_maj
 	{ BGE_ASICREV_BCM5787,		"unknown BCM5754/5787" },
 	{ BGE_ASICREV_BCM5906,		"unknown BCM5906" },
 	{ BGE_ASICREV_BCM57780,		"unknown BCM57780" },
+	{ BGE_ASICREV_BCM5717,		"unknown BCM5717" },
 
 	{ 0, NULL }
 };
@@ -342,6 +347,7 @@ static const struct bge_revision bge_maj
 #define	BGE_IS_5714_FAMILY(sc)		((sc)->bge_flags & BGE_FLAG_5714_FAMILY)
 #define	BGE_IS_575X_PLUS(sc)		((sc)->bge_flags & BGE_FLAG_575X_PLUS)
 #define	BGE_IS_5755_PLUS(sc)		((sc)->bge_flags & BGE_FLAG_5755_PLUS)
+#define	BGE_IS_5717_PLUS(sc)		((sc)->bge_flags & BGE_FLAG_5717_PLUS)
 
 const struct bge_revision * bge_lookup_rev(uint32_t);
 const struct bge_vendor * bge_lookup_vendor(uint16_t);
@@ -367,6 +373,7 @@ static int bge_get_eaddr_eeprom(struct b
 static int bge_get_eaddr(struct bge_softc *, uint8_t[]);
 
 static void bge_txeof(struct bge_softc *, uint16_t);
+static void bge_rxcsum(struct bge_softc *, struct bge_rx_bd *, struct mbuf *);
 static void bge_rxeof(struct bge_softc *, uint16_t, int);
 
 static void bge_asf_driver_up (struct bge_softc *);
@@ -376,7 +383,7 @@ static void bge_stats_update(struct bge_
 static void bge_stats_update_regs(struct bge_softc *);
 static struct mbuf *bge_check_short_dma(struct mbuf *);
 static struct mbuf *bge_setup_tso(struct bge_softc *, struct mbuf *,
-    uint16_t *);
+    uint16_t *, uint16_t *);
 static int bge_encap(struct bge_softc *, struct mbuf **, uint32_t *);
 
 static void bge_intr(void *);
@@ -1349,12 +1356,15 @@ bge_stop_fw(struct bge_softc *sc)
 static int
 bge_chipinit(struct bge_softc *sc)
 {
-	uint32_t dma_rw_ctl;
+	uint32_t dma_rw_ctl, misc_ctl;
 	uint16_t val;
 	int i;
 
 	/* Set endianness before we access any non-PCI registers. */
-	pci_write_config(sc->bge_dev, BGE_PCI_MISC_CTL, BGE_INIT, 4);
+	misc_ctl = BGE_INIT;
+	if (sc->bge_flags & BGE_FLAG_TAGGED_STATUS)
+		misc_ctl |= BGE_PCIMISCCTL_TAGGED_STATUS;
+	pci_write_config(sc->bge_dev, BGE_PCI_MISC_CTL, misc_ctl, 4);
 
 	/* Clear the MAC control register */
 	CSR_WRITE_4(sc, BGE_MAC_MODE, 0);
@@ -1446,6 +1456,8 @@ bge_chipinit(struct bge_softc *sc)
 	if (sc->bge_asicrev == BGE_ASICREV_BCM5703 ||
 	    sc->bge_asicrev == BGE_ASICREV_BCM5704)
 		dma_rw_ctl &= ~BGE_PCIDMARWCTL_MINDMA;
+	if (BGE_IS_5717_PLUS(sc))
+		dma_rw_ctl &= ~BGE_PCIDMARWCTL_DIS_CACHE_ALIGNMENT;
 	pci_write_config(sc->bge_dev, BGE_PCI_DMA_RW_CTL, dma_rw_ctl, 4);
 
 	/*
@@ -1529,7 +1541,16 @@ bge_blockinit(struct bge_softc *sc)
 	}
 
 	/* Configure mbuf pool watermarks */
-	if (!BGE_IS_5705_PLUS(sc)) {
+	if (sc->bge_asicrev == BGE_ASICREV_BCM5717) {
+		CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x0);
+		if (sc->bge_ifp->if_mtu > ETHERMTU) {
+			CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x7e);
+			CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0xea);
+		} else {
+			CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x2a);
+			CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0xa0);
+		}
+	} else if (!BGE_IS_5705_PLUS(sc)) {
 		CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_READDMA_LOWAT, 0x50);
 		CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_MACRX_LOWAT, 0x20);
 		CSR_WRITE_4(sc, BGE_BMAN_MBUFPOOL_HIWAT, 0x60);
@@ -1621,7 +1642,16 @@ bge_blockinit(struct bge_softc *sc)
 	    BGE_ADDR_HI(sc->bge_ldata.bge_rx_std_ring_paddr);
 	bus_dmamap_sync(sc->bge_cdata.bge_rx_std_ring_tag,
 	    sc->bge_cdata.bge_rx_std_ring_map, BUS_DMASYNC_PREREAD);
-	if (BGE_IS_5705_PLUS(sc)) {
+	if (BGE_IS_5717_PLUS(sc)) {
+		/*
+		 * Bits 31-16: Programmable ring size (2048, 1024, 512, .., 32)
+		 * Bits 15-2 : Maximum RX frame size
+		 * Bit 1     : 1 = Ring Disabled, 0 = Ring ENabled
+		 * Bit 0     : Reserved
+		 */
+		rcb->bge_maxlen_flags =
+		    BGE_RCB_MAXLEN_FLAGS(512, BGE_MAX_FRAMELEN << 2);
+	} else if (BGE_IS_5705_PLUS(sc)) {
 		/*
 		 * Bits 31-16: Programmable ring size (512, 256, 128, 64, 32)
 		 * Bits 15-2 : Reserved (should be 0)
@@ -1640,7 +1670,10 @@ bge_blockinit(struct bge_softc *sc)
 		rcb->bge_maxlen_flags =
 		    BGE_RCB_MAXLEN_FLAGS(BGE_MAX_FRAMELEN, 0);
 	}
-	rcb->bge_nicaddr = BGE_STD_RX_RINGS;
+	if (sc->bge_asicrev == BGE_ASICREV_BCM5717)
+		rcb->bge_nicaddr = BGE_STD_RX_RINGS_5717;
+	else
+		rcb->bge_nicaddr = BGE_STD_RX_RINGS;
 	/* Write the standard receive producer ring control block. */
 	CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_HI, rcb->bge_hostaddr.bge_addr_hi);
 	CSR_WRITE_4(sc, BGE_RX_STD_RCB_HADDR_LO, rcb->bge_hostaddr.bge_addr_lo);
@@ -1669,7 +1702,10 @@ bge_blockinit(struct bge_softc *sc)
 		    BUS_DMASYNC_PREREAD);
 		rcb->bge_maxlen_flags = BGE_RCB_MAXLEN_FLAGS(0,
 		    BGE_RCB_FLAG_USE_EXT_RX_BD | BGE_RCB_FLAG_RING_DISABLED);
-		rcb->bge_nicaddr = BGE_JUMBO_RX_RINGS;
+		if (sc->bge_asicrev == BGE_ASICREV_BCM5717)
+			rcb->bge_nicaddr = BGE_JUMBO_RX_RINGS_5717;
+		else
+			rcb->bge_nicaddr = BGE_JUMBO_RX_RINGS;
 		CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_HI,
 		    rcb->bge_hostaddr.bge_addr_hi);
 		CSR_WRITE_4(sc, BGE_RX_JUMBO_RCB_HADDR_LO,
@@ -1726,6 +1762,10 @@ bge_blockinit(struct bge_softc *sc)
 	if (BGE_IS_JUMBO_CAPABLE(sc))
 		CSR_WRITE_4(sc, BGE_RBDI_JUMBO_REPL_THRESH,
 		    BGE_JUMBO_RX_RING_CNT/8);
+	if (BGE_IS_5717_PLUS(sc)) {
+		CSR_WRITE_4(sc, BGE_STD_REPLENISH_LWM, 32);
+		CSR_WRITE_4(sc, BGE_JMB_REPLENISH_LWM, 16);
+	}
 
 	/*
 	 * Disable all send rings by setting the 'ring disabled' bit
@@ -1750,8 +1790,11 @@ bge_blockinit(struct bge_softc *sc)
 	BGE_HOSTADDR(taddr, sc->bge_ldata.bge_tx_ring_paddr);
 	RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_hi, taddr.bge_addr_hi);
 	RCB_WRITE_4(sc, vrcb, bge_hostaddr.bge_addr_lo, taddr.bge_addr_lo);
-	RCB_WRITE_4(sc, vrcb, bge_nicaddr,
-	    BGE_NIC_TXRING_ADDR(0, BGE_TX_RING_CNT));
+	if (sc->bge_asicrev == BGE_ASICREV_BCM5717)
+		RCB_WRITE_4(sc, vrcb, bge_nicaddr, BGE_SEND_RING_5717);
+	else
+		RCB_WRITE_4(sc, vrcb, bge_nicaddr,
+		    BGE_NIC_TXRING_ADDR(0, BGE_TX_RING_CNT));
 	RCB_WRITE_4(sc, vrcb, bge_maxlen_flags,
 	    BGE_RCB_MAXLEN_FLAGS(BGE_TX_RING_CNT, 0));
 
@@ -1760,7 +1803,10 @@ bge_blockinit(struct bge_softc *sc)
 	 * 'ring diabled' bit in the flags field of all the receive
 	 * return ring control blocks, located in NIC memory.
 	 */
-	if (!BGE_IS_5705_PLUS(sc))
+	if (sc->bge_asicrev == BGE_ASICREV_BCM5717) {
+		/* Should be 17, use 16 until we get an SRAM map. */
+		limit = 16;
+	} else if (!BGE_IS_5705_PLUS(sc))
 		limit = BGE_RX_RINGS_MAX;
 	else if (sc->bge_asicrev == BGE_ASICREV_BCM5755)
 		limit = 4;
@@ -1936,6 +1982,10 @@ bge_blockinit(struct bge_softc *sc)
 
 	/* Turn on read DMA state machine */
 	val = BGE_RDMAMODE_ENABLE | BGE_RDMAMODE_ALL_ATTNS;
+
+	if (sc->bge_asicrev == BGE_ASICREV_BCM5717)
+		val |= BGE_RDMAMODE_MULT_DMA_RD_DIS;
+
 	if (sc->bge_asicrev == BGE_ASICREV_BCM5784 ||
 	    sc->bge_asicrev == BGE_ASICREV_BCM5785 ||
 	    sc->bge_asicrev == BGE_ASICREV_BCM57780)
@@ -1944,16 +1994,18 @@ bge_blockinit(struct bge_softc *sc)
 		    BGE_RDMAMODE_MBUF_SBD_CRPT_ATTN;
 	if (sc->bge_flags & BGE_FLAG_PCIE)
 		val |= BGE_RDMAMODE_FIFO_LONG_BURST;
-	if (sc->bge_flags & BGE_FLAG_TSO) {
+	if (sc->bge_flags & (BGE_FLAG_TSO | BGE_FLAG_TSO3)) {
 		val |= BGE_RDMAMODE_TSO4_ENABLE;
-		if (sc->bge_asicrev == BGE_ASICREV_BCM5785 ||
+		if (sc->bge_flags & BGE_FLAG_TSO3 ||
+		    sc->bge_asicrev == BGE_ASICREV_BCM5785 ||
 		    sc->bge_asicrev == BGE_ASICREV_BCM57780)
 			val |= BGE_RDMAMODE_TSO6_ENABLE;
 	}
 	if (sc->bge_asicrev == BGE_ASICREV_BCM5761 ||
 	    sc->bge_asicrev == BGE_ASICREV_BCM5784 ||
 	    sc->bge_asicrev == BGE_ASICREV_BCM5785 ||
-	    sc->bge_asicrev == BGE_ASICREV_BCM57780) {
+	    sc->bge_asicrev == BGE_ASICREV_BCM57780 ||
+	    BGE_IS_5717_PLUS(sc)) {
 		/*
 		 * Enable fix for read DMA FIFO overruns.
 		 * The fix is to limit the number of RX BDs
@@ -1989,8 +2041,9 @@ bge_blockinit(struct bge_softc *sc)
 	CSR_WRITE_4(sc, BGE_SDC_MODE, val);
 
 	/* Turn on send data initiator state machine */
-	if (sc->bge_flags & BGE_FLAG_TSO)
-		CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE | 0x08);
+	if (sc->bge_flags & (BGE_FLAG_TSO | BGE_FLAG_TSO3))
+		CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE |
+		    BGE_SDIMODE_HW_LSO_PRE_DMA);
 	else
 		CSR_WRITE_4(sc, BGE_SDI_MODE, BGE_SDIMODE_ENABLE);
 
@@ -2104,9 +2157,22 @@ bge_probe(device_t dev)
 
 			id = pci_read_config(dev, BGE_PCI_MISC_CTL, 4) >>
 			    BGE_PCIMISCCTL_ASICREV_SHIFT;
-			if (BGE_ASICREV(id) == BGE_ASICREV_USE_PRODID_REG)
-				id = pci_read_config(dev,
-				    BGE_PCI_PRODID_ASICREV, 4);
+			if (BGE_ASICREV(id) == BGE_ASICREV_USE_PRODID_REG) {
+				/*
+				 * Find the ASCI revision.  Different chips
+				 * use different registers.
+				 */
+				switch (pci_get_device(dev)) {
+				case BCOM_DEVICEID_BCM5717:
+				case BCOM_DEVICEID_BCM5718:
+					id = pci_read_config(dev,
+					    BGE_PCI_GEN2_PRODID_ASICREV, 4);
+					break;
+				default:
+					id = pci_read_config(dev,
+					    BGE_PCI_PRODID_ASICREV, 4);
+				}
+			}
 			br = bge_lookup_rev(id);
 			v = bge_lookup_vendor(vid);
 			{
@@ -2423,7 +2489,7 @@ bge_dma_alloc(struct bge_softc *sc)
 		return (ENOMEM);
 	}
 	/* Create tag for Tx mbufs. */
-	if (sc->bge_flags & BGE_FLAG_TSO) {
+	if (sc->bge_flags & (BGE_FLAG_TSO | BGE_FLAG_TSO3)) {
 		txsegsz = BGE_TSOSEG_SZ;
 		txmaxsegsz = 65535 + sizeof(struct ether_vlan_header);
 	} else {
@@ -2539,6 +2605,10 @@ bge_can_use_msi(struct bge_softc *sc)
 {
 	int can_use_msi = 0;
 
+	/* Disable MSI for polling(4). */
+#ifdef DEVICE_POLLING
+	return (0);
+#endif
 	switch (sc->bge_asicrev) {
 	case BGE_ASICREV_BCM5714_A0:
 	case BGE_ASICREV_BCM5714:
@@ -2568,7 +2638,7 @@ bge_attach(device_t dev)
 	struct bge_softc *sc;
 	uint32_t hwcfg = 0, misccfg;
 	u_char eaddr[ETHER_ADDR_LEN];
-	int error, msicount, phy_addr, reg, rid, trys;
+	int error, f, msicount, phy_addr, reg, rid, trys;
 
 	sc = device_get_softc(dev);
 	sc->bge_dev = dev;
@@ -2594,14 +2664,55 @@ bge_attach(device_t dev)
 	sc->bge_chipid =
 	    pci_read_config(dev, BGE_PCI_MISC_CTL, 4) >>
 	    BGE_PCIMISCCTL_ASICREV_SHIFT;
-	if (BGE_ASICREV(sc->bge_chipid) == BGE_ASICREV_USE_PRODID_REG)
-		sc->bge_chipid = pci_read_config(dev, BGE_PCI_PRODID_ASICREV,
-		    4);
+	if (BGE_ASICREV(sc->bge_chipid) == BGE_ASICREV_USE_PRODID_REG) {
+		/*
+		 * Find the ASCI revision.  Different chips use different
+		 * registers.
+		 */
+		switch (pci_get_device(dev)) {
+		case BCOM_DEVICEID_BCM5717:
+		case BCOM_DEVICEID_BCM5718:
+			sc->bge_chipid = pci_read_config(dev,
+			    BGE_PCI_GEN2_PRODID_ASICREV, 4);
+			break;
+		default:
+			sc->bge_chipid = pci_read_config(dev,
+			    BGE_PCI_PRODID_ASICREV, 4);
+		}
+	}
 	sc->bge_asicrev = BGE_ASICREV(sc->bge_chipid);
 	sc->bge_chiprev = BGE_CHIPREV(sc->bge_chipid);
 
 	/* Set default PHY address. */
 	phy_addr = 1;
+	 /*
+	  * PHY address mapping for various devices.
+	  *
+	  *          | F0 Cu | F0 Sr | F1 Cu | F1 Sr |
+	  * ---------+-------+-------+-------+-------+
+	  * BCM57XX  |   1   |   X   |   X   |   X   |
+	  * BCM5704  |   1   |   X   |   1   |   X   |
+	  * BCM5717  |   1   |   8   |   2   |   9   |
+	  *
+	  * Other addresses may respond but they are not
+	  * IEEE compliant PHYs and should be ignored.
+	  */
+	if (sc->bge_asicrev == BGE_ASICREV_BCM5717) {
+		f = pci_get_function(dev);
+		if (sc->bge_chipid == BGE_CHIPID_BCM5717_A0) {
+			if (CSR_READ_4(sc, BGE_SGDIG_STS) &
+			    BGE_SGDIGSTS_IS_SERDES)
+				phy_addr = f + 8;
+			else
+				phy_addr = f + 1;
+		} else if (sc->bge_chipid == BGE_CHIPID_BCM5717_B0) {
+			if (CSR_READ_4(sc, BGE_CPMU_PHY_STRAP) &
+			    BGE_CPMU_PHY_STRAP_IS_SERDES)
+				phy_addr = f + 8;
+			else
+				phy_addr = f + 1;
+		}
+	}
 
 	/*
 	 * Don't enable Ethernet at WireSpeed for the 5700, 5906, or the
@@ -2610,7 +2721,8 @@ bge_attach(device_t dev)
 	if (sc->bge_asicrev != BGE_ASICREV_BCM5700 &&
 	    sc->bge_asicrev != BGE_ASICREV_BCM5906 &&
 	    sc->bge_chipid != BGE_CHIPID_BCM5705_A0 &&
-	    sc->bge_chipid != BGE_CHIPID_BCM5705_A1)
+	    sc->bge_chipid != BGE_CHIPID_BCM5705_A1 &&
+	    !BGE_IS_5717_PLUS(sc))
 		sc->bge_phy_flags |= BGE_PHY_WIRESPEED;
 
 	if (bge_has_eaddr(sc))
@@ -2618,6 +2730,11 @@ bge_attach(device_t dev)
 
 	/* Save chipset family. */
 	switch (sc->bge_asicrev) {
+	case BGE_ASICREV_BCM5717:
+		sc->bge_flags |= BGE_FLAG_5717_PLUS | BGE_FLAG_5755_PLUS |
+		    BGE_FLAG_575X_PLUS | BGE_FLAG_5705_PLUS | BGE_FLAG_JUMBO |
+		    BGE_FLAG_SHORT_DMA_BUG | BGE_FLAG_JUMBO_FRAME;
+		break;
 	case BGE_ASICREV_BCM5755:
 	case BGE_ASICREV_BCM5761:
 	case BGE_ASICREV_BCM5784:
@@ -2663,6 +2780,7 @@ bge_attach(device_t dev)
 		sc->bge_phy_flags |= BGE_PHY_NO_3LED;
 	if ((BGE_IS_5705_PLUS(sc)) &&
 	    sc->bge_asicrev != BGE_ASICREV_BCM5906 &&
+	    sc->bge_asicrev != BGE_ASICREV_BCM5717 &&
 	    sc->bge_asicrev != BGE_ASICREV_BCM5785 &&
 	    sc->bge_asicrev != BGE_ASICREV_BCM57780) {
 		if (sc->bge_asicrev == BGE_ASICREV_BCM5755 ||
@@ -2679,7 +2797,8 @@ bge_attach(device_t dev)
 	}
 
 	/* Identify the chips that use an CPMU. */
-	if (sc->bge_asicrev == BGE_ASICREV_BCM5784 ||
+	if (BGE_IS_5717_PLUS(sc) ||
+	    sc->bge_asicrev == BGE_ASICREV_BCM5784 ||
 	    sc->bge_asicrev == BGE_ASICREV_BCM5761 ||
 	    sc->bge_asicrev == BGE_ASICREV_BCM5785 ||
 	    sc->bge_asicrev == BGE_ASICREV_BCM57780)
@@ -2722,7 +2841,10 @@ bge_attach(device_t dev)
 	 * the TSO to the controllers that are not affected TSO issues
 	 * (e.g. 5755 or higher).
 	 */
-	if (BGE_IS_5755_PLUS(sc)) {
+	if (BGE_IS_5717_PLUS(sc)) {
+		/* BCM5717 requires different TSO configuration. */
+		sc->bge_flags |= BGE_FLAG_TSO3;
+	} else if (BGE_IS_5755_PLUS(sc)) {
 		/*
 		 * BCM5754 and BCM5787 shares the same ASIC id so
 		 * explicit device id check is required.
@@ -2785,6 +2907,16 @@ bge_attach(device_t dev)
 		}
 	}
 
+	/*
+	 * All controllers except BCM5700 supports tagged status but
+	 * we use tagged status only for MSI case on BCM5717. Otherwise
+	 * MSI on BCM5717 does not work.
+	 */
+#ifndef DEVICE_POLLING
+	if (sc->bge_flags & BGE_FLAG_MSI && BGE_IS_5717_PLUS(sc))
+		sc->bge_flags |= BGE_FLAG_TAGGED_STATUS;
+#endif
+
 	sc->bge_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
 	    RF_SHAREABLE | RF_ACTIVE);
 
@@ -2848,7 +2980,9 @@ bge_attach(device_t dev)
 	}
 
 	/* 5705 limits RX return ring to 512 entries. */
-	if (BGE_IS_5705_PLUS(sc))
+	if (BGE_IS_5717_PLUS(sc))
+		sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT;
+	else if (BGE_IS_5705_PLUS(sc))
 		sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT_5705;
 	else
 		sc->bge_return_ring_cnt = BGE_RETURN_RING_CNT;
@@ -2893,7 +3027,7 @@ bge_attach(device_t dev)
 	ifp->if_hwassist = sc->bge_csum_features;
 	ifp->if_capabilities = IFCAP_HWCSUM | IFCAP_VLAN_HWTAGGING |
 	    IFCAP_VLAN_MTU;
-	if ((sc->bge_flags & BGE_FLAG_TSO) != 0) {
+	if ((sc->bge_flags & (BGE_FLAG_TSO | BGE_FLAG_TSO3)) != 0) {
 		ifp->if_hwassist |= CSUM_TSO;
 		ifp->if_capabilities |= IFCAP_TSO4 | IFCAP_VLAN_HWTSO;
 	}
@@ -3340,6 +3474,7 @@ bge_reset(struct bge_softc *sc)
 
 	/* XXX: Broadcom Linux driver. */
 	if (sc->bge_flags & BGE_FLAG_PCIE &&
+	    sc->bge_asicrev != BGE_ASICREV_BCM5717 &&
 	    sc->bge_chipid != BGE_CHIPID_BCM5750_A0 &&
 	    sc->bge_asicrev != BGE_ASICREV_BCM5785) {
 		/* Enable Data FIFO protection. */
@@ -3480,20 +3615,8 @@ bge_rxeof(struct bge_softc *sc, uint16_t
 		m->m_pkthdr.len = m->m_len = cur_rx->bge_len - ETHER_CRC_LEN;
 		m->m_pkthdr.rcvif = ifp;
 
-		if (ifp->if_capenable & IFCAP_RXCSUM) {
-			if (cur_rx->bge_flags & BGE_RXBDFLAG_IP_CSUM) {
-				m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
-				if ((cur_rx->bge_ip_csum ^ 0xFFFF) == 0)
-					m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
-			}
-			if (cur_rx->bge_flags & BGE_RXBDFLAG_TCP_UDP_CSUM &&
-			    m->m_pkthdr.len >= ETHER_MIN_NOPAD) {
-				m->m_pkthdr.csum_data =
-				    cur_rx->bge_tcp_udp_csum;
-				m->m_pkthdr.csum_flags |=
-				    CSUM_DATA_VALID | CSUM_PSEUDO_HDR;
-			}
-		}
+		if (ifp->if_capenable & IFCAP_RXCSUM)
+			bge_rxcsum(sc, cur_rx, m);
 
 		/*
 		 * If we received a packet with a vlan tag,
@@ -3550,6 +3673,41 @@ bge_rxeof(struct bge_softc *sc, uint16_t
 }
 
 static void
+bge_rxcsum(struct bge_softc *sc, struct bge_rx_bd *cur_rx, struct mbuf *m)
+{
+
+	if (BGE_IS_5717_PLUS(sc)) {
+		if ((cur_rx->bge_flags & BGE_RXBDFLAG_IPV6) == 0) {
+			if (cur_rx->bge_flags & BGE_RXBDFLAG_IP_CSUM) {
+				m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
+				if ((cur_rx->bge_error_flag &
+				    BGE_RXERRFLAG_IP_CSUM_NOK) == 0)
+					m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
+			}
+			if (cur_rx->bge_flags & BGE_RXBDFLAG_TCP_UDP_CSUM) {
+				m->m_pkthdr.csum_data =
+				    cur_rx->bge_tcp_udp_csum;
+				m->m_pkthdr.csum_flags |= CSUM_DATA_VALID |
+				    CSUM_PSEUDO_HDR;
+			}
+		}
+	} else {
+		if (cur_rx->bge_flags & BGE_RXBDFLAG_IP_CSUM) {
+			m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
+			if ((cur_rx->bge_ip_csum ^ 0xFFFF) == 0)
+				m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
+		}
+		if (cur_rx->bge_flags & BGE_RXBDFLAG_TCP_UDP_CSUM &&
+		    m->m_pkthdr.len >= ETHER_MIN_NOPAD) {
+			m->m_pkthdr.csum_data =
+			    cur_rx->bge_tcp_udp_csum;
+			m->m_pkthdr.csum_flags |= CSUM_DATA_VALID |
+			    CSUM_PSEUDO_HDR;
+		}
+	}
+}
+
+static void
 bge_txeof(struct bge_softc *sc, uint16_t tx_cons)
 {
 	struct bge_tx_bd *cur_tx;
@@ -3664,7 +3822,7 @@ bge_intr_task(void *arg, int pending)
 {
 	struct bge_softc *sc;
 	struct ifnet *ifp;
-	uint32_t status;
+	uint32_t status, status_tag;
 	uint16_t rx_prod, tx_cons;
 
 	sc = (struct bge_softc *)arg;
@@ -3685,16 +3843,19 @@ bge_intr_task(void *arg, int pending)
 	rx_prod = sc->bge_ldata.bge_status_block->bge_idx[0].bge_rx_prod_idx;
 	tx_cons = sc->bge_ldata.bge_status_block->bge_idx[0].bge_tx_cons_idx;
 	status = sc->bge_ldata.bge_status_block->bge_status;
+	status_tag = sc->bge_ldata.bge_status_block->bge_status_tag << 24;
 	sc->bge_ldata.bge_status_block->bge_status = 0;
 	bus_dmamap_sync(sc->bge_cdata.bge_status_tag,
 	    sc->bge_cdata.bge_status_map,
 	    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+	if ((sc->bge_flags & BGE_FLAG_TAGGED_STATUS) == 0)
+		status_tag = 0;
 
 	if ((status & BGE_STATFLAG_LINKSTATE_CHANGED) != 0)
 		bge_link_upd(sc);
 
 	/* Let controller work. */
-	bge_writembx(sc, BGE_MBX_IRQ0_LO, 0);
+	bge_writembx(sc, BGE_MBX_IRQ0_LO, status_tag);
 
 	if (ifp->if_drv_flags & IFF_DRV_RUNNING &&
 	    sc->bge_rx_saved_considx != rx_prod) {
@@ -4100,7 +4261,8 @@ bge_check_short_dma(struct mbuf *m)
 }
 
 static struct mbuf *
-bge_setup_tso(struct bge_softc *sc, struct mbuf *m, uint16_t *mss)
+bge_setup_tso(struct bge_softc *sc, struct mbuf *m, uint16_t *mss,
+    uint16_t *flags)
 {
 	struct ip *ip;
 	struct tcphdr *tcp;
@@ -4143,14 +4305,30 @@ bge_setup_tso(struct bge_softc *sc, stru
 	 * Broadcom controllers uses different descriptor format for
 	 * TSO depending on ASIC revision. Due to TSO-capable firmware
 	 * license issue and lower performance of firmware based TSO
-	 * we only support hardware based TSO which is applicable for
-	 * BCM5755 or newer controllers. Hardware based TSO uses 11
-	 * bits to store MSS and upper 5 bits are used to store IP/TCP
-	 * header length(including IP/TCP options). The header length
-	 * is expressed as 32 bits unit.
+	 * we only support hardware based TSO.
 	 */
+	/* Calculate header length, incl. TCP/IP options, in 32 bit units. */
 	hlen = ((ip->ip_hl << 2) + (tcp->th_off << 2)) >> 2;
-	*mss |= (hlen << 11);
+	if (sc->bge_flags & BGE_FLAG_TSO3) {
+		/*
+		 * For BCM5717 and newer controllers, hardware based TSO
+		 * uses the 14 lower bits of the bge_mss field to store the
+		 * MSS and the upper 2 bits to store the lowest 2 bits of
+		 * the IP/TCP header length.  The upper 6 bits of the header
+		 * length are stored in the bge_flags[14:10,4] field.  Jumbo
+		 * frames are supported.
+		 */
+		*mss |= ((hlen & 0x3) << 14);
+		*flags |= ((hlen & 0xF8) << 7) | ((hlen & 0x4) << 2);
+	} else {
+		/*
+		 * For BCM5755 and newer controllers, hardware based TSO uses
+		 * the lower 11	bits to store the MSS and the upper 5 bits to
+		 * store the IP/TCP header length. Jumbo frames are not
+		 * supported.
+		 */
+		*mss |= (hlen << 11);
+	}
 	return (m);
 }
 
@@ -4180,7 +4358,7 @@ bge_encap(struct bge_softc *sc, struct m
 		m = *m_head;
 	}
 	if ((m->m_pkthdr.csum_flags & CSUM_TSO) != 0) {
-		*m_head = m = bge_setup_tso(sc, m, &mss);
+		*m_head = m = bge_setup_tso(sc, m, &mss, &csum_flags);
 		if (*m_head == NULL)
 			return (ENOBUFS);
 		csum_flags |= BGE_TXBDFLAG_CPU_PRE_DMA |
@@ -4203,21 +4381,26 @@ bge_encap(struct bge_softc *sc, struct m
 			csum_flags |= BGE_TXBDFLAG_IP_FRAG;
 	}
 
-	if ((m->m_pkthdr.csum_flags & CSUM_TSO) == 0 &&
-	    sc->bge_forced_collapse > 0 &&
-	    (sc->bge_flags & BGE_FLAG_PCIE) != 0 && m->m_next != NULL) {
-		/*
-		 * Forcedly collapse mbuf chains to overcome hardware
-		 * limitation which only support a single outstanding
-		 * DMA read operation.
-		 */
-		if (sc->bge_forced_collapse == 1)
-			m = m_defrag(m, M_DONTWAIT);
-		else
-			m = m_collapse(m, M_DONTWAIT, sc->bge_forced_collapse);
-		if (m == NULL)
-			m = *m_head;
-		*m_head = m;
+	if ((m->m_pkthdr.csum_flags & CSUM_TSO) == 0) {
+		if (sc->bge_flags & BGE_FLAG_JUMBO_FRAME &&
+		    m->m_pkthdr.len > ETHER_MAX_LEN)
+			csum_flags |= BGE_TXBDFLAG_JUMBO_FRAME;
+		if (sc->bge_forced_collapse > 0 &&
+		    (sc->bge_flags & BGE_FLAG_PCIE) != 0 && m->m_next != NULL) {
+			/*
+			 * Forcedly collapse mbuf chains to overcome hardware
+			 * limitation which only support a single outstanding
+			 * DMA read operation.
+			 */
+			if (sc->bge_forced_collapse == 1)
+				m = m_defrag(m, M_DONTWAIT);
+			else
+				m = m_collapse(m, M_DONTWAIT,
+				    sc->bge_forced_collapse);
+			if (m == NULL)
+				m = *m_head;
+			*m_head = m;
+		}
 	}
 
 	map = sc->bge_cdata.bge_tx_dmamap[idx];

Modified: stable/7/sys/dev/bge/if_bgereg.h
==============================================================================
--- stable/7/sys/dev/bge/if_bgereg.h	Mon Nov  8 19:53:16 2010	(r214999)
+++ stable/7/sys/dev/bge/if_bgereg.h	Mon Nov  8 19:54:44 2010	(r215000)
@@ -82,6 +82,7 @@
 #define	BGE_UNMAPPED_END		0x00001FFF
 #define	BGE_DMA_DESCRIPTORS		0x00002000
 #define	BGE_DMA_DESCRIPTORS_END		0x00003FFF
+#define	BGE_SEND_RING_5717		0x00004000
 #define	BGE_SEND_RING_1_TO_4		0x00004000
 #define	BGE_SEND_RING_1_TO_4_END	0x00005FFF
 
@@ -100,6 +101,8 @@
 #define	BGE_BUFFPOOL_2_END		0x00017FFF
 #define	BGE_BUFFPOOL_3			0x00018000 /* or expansion ROM */
 #define	BGE_BUFFPOOL_3_END		0x0001FFFF
+#define	BGE_STD_RX_RINGS_5717		0x00040000
+#define	BGE_JUMBO_RX_RINGS_5717		0x00044400
 
 /* Mappings for external SSRAM configurations */
 #define	BGE_SEND_RING_5_TO_6		0x00006000
@@ -219,6 +222,7 @@
 #define	BGE_PCI_ISR_MBX_HI		0xB0
 #define	BGE_PCI_ISR_MBX_LO		0xB4
 #define	BGE_PCI_PRODID_ASICREV		0xBC
+#define	BGE_PCI_GEN2_PRODID_ASICREV	0xF4
 
 /* PCI Misc. Host control register */
 #define	BGE_PCIMISCCTL_CLEAR_INTA	0x00000001
@@ -229,6 +233,7 @@
 #define	BGE_PCIMISCCTL_CLOCKCTL_RW	0x00000020
 #define	BGE_PCIMISCCTL_REG_WORDSWAP	0x00000040
 #define	BGE_PCIMISCCTL_INDIRECT_ACCESS	0x00000080
+#define	BGE_PCIMISCCTL_TAGGED_STATUS	0x00000200
 #define	BGE_PCIMISCCTL_ASICREV		0xFFFF0000
 #define	BGE_PCIMISCCTL_ASICREV_SHIFT	16
 
@@ -311,6 +316,8 @@
 #define	BGE_CHIPID_BCM5906_A2		0xc002
 #define	BGE_CHIPID_BCM57780_A0		0x57780000
 #define	BGE_CHIPID_BCM57780_A1		0x57780001
+#define	BGE_CHIPID_BCM5717_A0		0x05717000
+#define	BGE_CHIPID_BCM5717_B0		0x05717100
 
 /* shorthand one */
 #define	BGE_ASICREV(x)			((x) >> 12)
@@ -331,6 +338,7 @@
 /* Should consult BGE_PCI_PRODID_ASICREV for ChipID */
 #define	BGE_ASICREV_USE_PRODID_REG	0x0f
 /* BGE_PCI_PRODID_ASICREV ASIC rev. identifiers. */
+#define	BGE_ASICREV_BCM5717		0x5717
 #define	BGE_ASICREV_BCM5761		0x5761
 #define	BGE_ASICREV_BCM5784		0x5784
 #define	BGE_ASICREV_BCM5785		0x5785
@@ -348,11 +356,14 @@
 #define	BGE_CHIPREV_5750_AX		0x40
 #define	BGE_CHIPREV_5750_BX		0x41
 /* BGE_PCI_PRODID_ASICREV chip rev. identifiers. */
+#define	BGE_CHIPREV_5717_AX		0x57170
+#define	BGE_CHIPREV_5717_BX		0x57171
 #define	BGE_CHIPREV_5761_AX		0x57611
 #define	BGE_CHIPREV_5784_AX		0x57841
 
 /* PCI DMA Read/Write Control register */
 #define	BGE_PCIDMARWCTL_MINDMA		0x000000FF
+#define	BGE_PCIDMARWCTL_DIS_CACHE_ALIGNMENT	0x00000001
 #define	BGE_PCIDMARWCTL_RDADRR_BNDRY	0x00000700
 #define	BGE_PCIDMARWCTL_WRADDR_BNDRY	0x00003800
 #define	BGE_PCIDMARWCTL_ONEDMA_ATONCE	0x0000C000
@@ -566,6 +577,7 @@
 #define	BGE_TX_RINGS_MAX		4
 #define	BGE_TX_RINGS_EXTSSRAM_MAX	16
 #define	BGE_RX_RINGS_MAX		16
+#define	BGE_RX_RINGS_MAX_5717		17
 
 /* Ethernet MAC control registers */
 #define	BGE_MAC_MODE			0x0400
@@ -843,9 +855,10 @@
 #define	BGE_SGDIGCFG_AUTO		0x80000000
 
 /* SGDIG status (not documented) */
+#define	BGE_SGDIGSTS_DONE		0x00000002
+#define	BGE_SGDIGSTS_IS_SERDES		0x00000100
 #define	BGE_SGDIGSTS_PAUSE_CAP		0x00080000
 #define	BGE_SGDIGSTS_ASYM_PAUSE		0x00100000
-#define	BGE_SGDIGSTS_DONE		0x00000002
 
 
 /* MI communication register */
@@ -911,6 +924,7 @@
 #define	BGE_SDIMODE_RESET		0x00000001
 #define	BGE_SDIMODE_ENABLE		0x00000002
 #define	BGE_SDIMODE_STATS_OFLOW_ATTN	0x00000004
+#define	BGE_SDIMODE_HW_LSO_PRE_DMA	0x00000008
 
 /* Send Data Initiator stats register */
 #define	BGE_SDISTAT_STATS_OFLOW_ATTN	0x00000004
@@ -1188,6 +1202,9 @@
 #define	BGE_RBDI_STD_REPL_THRESH	0x2C18
 #define	BGE_RBDI_JUMBO_REPL_THRESH	0x2C1C
 
+#define	BGE_STD_REPLENISH_LWM		0x2D00
+#define	BGE_JMB_REPLENISH_LWM		0x2D04
+
 /* Receive BD Initiator Mode register */
 #define	BGE_RBDIMODE_RESET		0x00000001
 #define	BGE_RBDIMODE_ENABLE		0x00000002
@@ -1501,6 +1518,7 @@
 #define	BGE_RDMAMODE_MBUF_SBD_CRPT_ATTN	0x00002000
 #define	BGE_RDMAMODE_FIFO_SIZE_128	0x00020000
 #define	BGE_RDMAMODE_FIFO_LONG_BURST	0x00030000
+#define	BGE_RDMAMODE_MULT_DMA_RD_DIS	0x01000000
 #define	BGE_RDMAMODE_TSO4_ENABLE	0x08000000
 #define	BGE_RDMAMODE_TSO6_ENABLE	0x10000000
 
@@ -2068,15 +2086,27 @@ struct bge_tx_bd {
 #define	BGE_TXBDFLAG_IP_CSUM		0x0002
 #define	BGE_TXBDFLAG_END		0x0004
 #define	BGE_TXBDFLAG_IP_FRAG		0x0008
+#define	BGE_TXBDFLAG_JUMBO_FRAME	0x0008	/* 5717 */
 #define	BGE_TXBDFLAG_IP_FRAG_END	0x0010
+#define	BGE_TXBDFLAG_HDRLEN_BIT2	0x0010	/* 5717 */
+#define	BGE_TXBDFLAG_SNAP		0x0020	/* 5717 */
 #define	BGE_TXBDFLAG_VLAN_TAG		0x0040
 #define	BGE_TXBDFLAG_COAL_NOW		0x0080
 #define	BGE_TXBDFLAG_CPU_PRE_DMA	0x0100
 #define	BGE_TXBDFLAG_CPU_POST_DMA	0x0200
+#define	BGE_TXBDFLAG_HDRLEN_BIT3	0x0400	/* 5717 */
+#define	BGE_TXBDFLAG_HDRLEN_BIT4	0x0800	/* 5717 */
 #define	BGE_TXBDFLAG_INSERT_SRC_ADDR	0x1000
+#define	BGE_TXBDFLAG_HDRLEN_BIT5	0x1000	/* 5717 */
+#define	BGE_TXBDFLAG_HDRLEN_BIT6	0x2000	/* 5717 */
+#define	BGE_TXBDFLAG_HDRLEN_BIT7	0x4000	/* 5717 */
 #define	BGE_TXBDFLAG_CHOOSE_SRC_ADDR	0x6000
 #define	BGE_TXBDFLAG_NO_CRC		0x8000
 
+#define	BGE_TXBDFLAG_MSS_SIZE_MASK	0x3FFF	/* 5717 */
+/* Bits [1:0] of the MSS header length. */
+#define	BGE_TXBDFLAG_MSS_HDRLEN_MASK	0xC000	/* 5717 */
+
 #define	BGE_NIC_TXRING_ADDR(ringno, size)	\
 	BGE_SEND_RING_1_TO_4 +			\
 	((ringno * sizeof(struct bge_tx_bd) * size) / 4)
@@ -2153,6 +2183,7 @@ struct bge_extrx_bd {
 #define	BGE_RXBDFLAG_IP_CSUM		0x1000
 #define	BGE_RXBDFLAG_TCP_UDP_CSUM	0x2000
 #define	BGE_RXBDFLAG_TCP_UDP_IS_TCP	0x4000
+#define	BGE_RXBDFLAG_IPV6		0x8000
 
 #define	BGE_RXERRFLAG_BAD_CRC		0x0001
 #define	BGE_RXERRFLAG_COLL_DETECT	0x0002
@@ -2162,6 +2193,7 @@ struct bge_extrx_bd {
 #define	BGE_RXERRFLAG_RUNT		0x0020
 #define	BGE_RXERRFLAG_TRUNC_NO_RSRCS	0x0040
 #define	BGE_RXERRFLAG_GIANT		0x0080
+#define	BGE_RXERRFLAG_IP_CSUM_NOK	0x1000	/* 5717 */
 
 struct bge_sts_idx {
 #if BYTE_ORDER == LITTLE_ENDIAN
@@ -2175,7 +2207,7 @@ struct bge_sts_idx {
 
 struct bge_status_block {
 	uint32_t		bge_status;
-	uint32_t		bge_rsvd0;
+	uint32_t		bge_status_tag;
 #if BYTE_ORDER == LITTLE_ENDIAN
 	uint16_t		bge_rx_jumbo_cons_idx;
 	uint16_t		bge_rx_std_cons_idx;
@@ -2221,6 +2253,8 @@ struct bge_status_block {
 #define	BCOM_DEVICEID_BCM5714S		0x1669
 #define	BCOM_DEVICEID_BCM5715		0x1678
 #define	BCOM_DEVICEID_BCM5715S		0x1679
+#define	BCOM_DEVICEID_BCM5717		0x1655
+#define	BCOM_DEVICEID_BCM5718		0x1656
 #define	BCOM_DEVICEID_BCM5720		0x1658
 #define	BCOM_DEVICEID_BCM5721		0x1659
 #define	BCOM_DEVICEID_BCM5722		0x165A
@@ -2717,16 +2751,20 @@ struct bge_softc {
 #define	BGE_FLAG_EADDR		0x00000008
 #define	BGE_FLAG_MII_SERDES	0x00000010
 #define	BGE_FLAG_CPMU_PRESENT	0x00000020
+#define	BGE_FLAG_TAGGED_STATUS	0x00000040
 #define	BGE_FLAG_MSI		0x00000100
 #define	BGE_FLAG_PCIX		0x00000200
 #define	BGE_FLAG_PCIE		0x00000400
 #define	BGE_FLAG_TSO		0x00000800
+#define	BGE_FLAG_TSO3		0x00001000
+#define	BGE_FLAG_JUMBO_FRAME	0x00002000
 #define	BGE_FLAG_5700_FAMILY	0x00010000
 #define	BGE_FLAG_5705_PLUS	0x00020000
 #define	BGE_FLAG_5714_FAMILY	0x00040000
 #define	BGE_FLAG_575X_PLUS	0x00080000
 #define	BGE_FLAG_5755_PLUS	0x00100000
 #define	BGE_FLAG_5788		0x00200000
+#define	BGE_FLAG_5717_PLUS	0x00400000
 #define	BGE_FLAG_40BIT_BUG	0x01000000
 #define	BGE_FLAG_4G_BNDRY_BUG	0x02000000
 #define	BGE_FLAG_RX_ALIGNBUG	0x04000000


More information about the svn-src-all mailing list