svn commit: r211923 - head/sys/mips/rmi
Jayachandran C.
jchandra at FreeBSD.org
Sat Aug 28 07:58:11 UTC 2010
Author: jchandra
Date: Sat Aug 28 07:58:10 2010
New Revision: 211923
URL: http://svn.freebsd.org/changeset/base/211923
Log:
Initial code for XLR CompactFlash driver.
Submitted by: Sreekanth M. S. <kanthms at netlogicmicro com>
Added:
head/sys/mips/rmi/xlr_pcmcia.c (contents, props changed)
Modified:
head/sys/mips/rmi/board.c
head/sys/mips/rmi/board.h
head/sys/mips/rmi/files.xlr
head/sys/mips/rmi/iodi.c
Modified: head/sys/mips/rmi/board.c
==============================================================================
--- head/sys/mips/rmi/board.c Sat Aug 28 07:24:45 2010 (r211922)
+++ head/sys/mips/rmi/board.c Sat Aug 28 07:58:10 2010 (r211923)
@@ -88,6 +88,16 @@ struct stn_cc *xls_core_cc_configs[] = {
struct xlr_board_info xlr_board_info;
+static int
+xlr_pcmcia_present(void)
+{
+ xlr_reg_t *mmio = xlr_io_mmio(XLR_IO_GPIO_OFFSET);
+ uint32_t resetconf;
+
+ resetconf = xlr_read_reg(mmio, 21);
+ return ((resetconf & 0x4000) != 0);
+}
+
/*
* All our knowledge of chip and board that cannot be detected by probing
* at run-time goes here
@@ -103,6 +113,7 @@ xlr_board_info_setup()
/* Board version 8 has NAND flash */
xlr_board_info.cfi =
(xlr_boot1_info.board_major_version != RMI_XLR_BOARD_ARIZONA_VIII);
+ xlr_board_info.ata = xlr_pcmcia_present();
xlr_board_info.pci_irq = 0;
xlr_board_info.credit_configs = xls_core_cc_configs;
xlr_board_info.bucket_sizes = &xls_bucket_sizes;
@@ -155,6 +166,7 @@ xlr_board_info_setup()
xlr_board_info.nr_cpus = 32;
xlr_board_info.usb = 0;
xlr_board_info.cfi = 1;
+ xlr_board_info.ata = xlr_pcmcia_present();
xlr_board_info.pci_irq = 0;
xlr_board_info.credit_configs = xlr_core_cc_configs;
xlr_board_info.bucket_sizes = &bucket_sizes;
Modified: head/sys/mips/rmi/board.h
==============================================================================
--- head/sys/mips/rmi/board.h Sat Aug 28 07:24:45 2010 (r211922)
+++ head/sys/mips/rmi/board.h Sat Aug 28 07:58:10 2010 (r211923)
@@ -147,7 +147,8 @@ struct xlr_board_info {
int is_xls;
int nr_cpus;
int usb; /* usb enabled ? */
- int cfi; /* compact flash driver for NOR? */
+ int cfi; /* NOR flash */
+ int ata; /* PCMCIA/compactflash driver */
int pci_irq;
struct stn_cc **credit_configs; /* pointer to Core station credits */
struct bucket_size *bucket_sizes; /* pointer to Core station
Modified: head/sys/mips/rmi/files.xlr
==============================================================================
--- head/sys/mips/rmi/files.xlr Sat Aug 28 07:24:45 2010 (r211922)
+++ head/sys/mips/rmi/files.xlr Sat Aug 28 07:58:10 2010 (r211923)
@@ -14,6 +14,7 @@ mips/rmi/xlr_i2c.c option
mips/rmi/uart_bus_xlr_iodi.c optional uart
mips/rmi/uart_cpu_mips_xlr.c optional uart
mips/rmi/xlr_pci.c optional pci
+mips/rmi/xlr_pcmcia.c optional ata
mips/rmi/xls_ehci.c optional usb ehci
mips/rmi/bus_space_rmi.c standard
mips/rmi/bus_space_rmi_pci.c standard
Modified: head/sys/mips/rmi/iodi.c
==============================================================================
--- head/sys/mips/rmi/iodi.c Sat Aug 28 07:24:45 2010 (r211922)
+++ head/sys/mips/rmi/iodi.c Sat Aug 28 07:58:10 2010 (r211923)
@@ -89,6 +89,20 @@ iodi_setup_intr(device_t, device_t, stru
struct iodi_softc *iodi_softc; /* There can be only one. */
+/*
+ * We will manage the Flash/PCMCIA devices in IODI for now.
+ * The NOR flash, Compact flash etc. which can be connected on
+ * various chip selects on the peripheral IO, should have a
+ * separate bus later.
+ */
+static void
+bridge_pcmcia_ack(int irq)
+{
+ xlr_reg_t *mmio = xlr_io_mmio(XLR_IO_FLASH_OFFSET);
+
+ xlr_write_reg(mmio, 0x60, 0xffffffff);
+}
+
static int
iodi_setup_intr(device_t dev, device_t child,
struct resource *ires, int flags, driver_filter_t * filt,
@@ -112,6 +126,10 @@ iodi_setup_intr(device_t dev, device_t c
cpu_establish_hardintr("ehci", filt, intr, arg, PIC_USB_IRQ, flags,
cookiep);
pic_setup_intr(PIC_USB_IRQ - PIC_IRQ_BASE, PIC_USB_IRQ, 0x1, 0);
+ } else if (strcmp(device_get_name(child), "ata") == 0) {
+ xlr_establish_intr("ata", filt, intr, arg, PIC_PCMCIA_IRQ, flags,
+ cookiep, bridge_pcmcia_ack);
+ pic_setup_intr(PIC_PCMCIA_IRQ - PIC_IRQ_BASE, PIC_PCMCIA_IRQ, 0x1, 0);
}
return (0);
@@ -158,6 +176,9 @@ iodi_alloc_resource(device_t bus, device
} else if (strcmp(device_get_name(child), "cfi") == 0) {
res->r_bushandle = MIPS_PHYS_TO_KSEG1(0x1c000000);
res->r_bustag = 0;
+ } else if (strcmp(device_get_name(child), "ata") == 0) {
+ res->r_bushandle = MIPS_PHYS_TO_KSEG1(0x1d000000);
+ res->r_bustag = rmi_pci_bus_space; /* byte swapping (not really PCI) */
}
/* res->r_start = *rid; */
return (res);
@@ -206,6 +227,9 @@ iodi_attach(device_t dev)
if (xlr_board_info.cfi)
device_add_child(dev, "cfi", 0);
+ if (xlr_board_info.ata)
+ device_add_child(dev, "ata", 0);
+
if (xlr_board_info.gmac_block[0].enabled) {
tmpd = device_add_child(dev, "rge", 0);
device_set_ivars(tmpd, &xlr_board_info.gmac_block[0]);
Added: head/sys/mips/rmi/xlr_pcmcia.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/mips/rmi/xlr_pcmcia.c Sat Aug 28 07:58:10 2010 (r211923)
@@ -0,0 +1,149 @@
+/*-
+ * Copyright (c) 2003-2009 RMI Corporation
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of RMI Corporation, nor the names of its contributors,
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * RMI_BSD */
+/*
+ * ATA driver for the XLR_PCMCIA Host adapter on the RMI XLR/XLS/.
+ */
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/bus.h>
+#include <sys/rman.h>
+#include <vm/uma.h>
+#include <sys/ata.h>
+#include <sys/sema.h>
+#include <sys/taskqueue.h>
+#include <sys/bus_dma.h>
+
+#include <dev/ata/ata-all.h>
+#include <mips/rmi/pic.h>
+#include <mips/rmi/iomap.h>
+#include <mips/include/resource.h>
+#include <mips/rmi/interrupt.h>
+
+#define XLR_PCMCIA_DATA_REG 0x1f0
+#define XLR_PCMCIA_ERROR_REG 0x1f1
+#define XLR_PCMCIA_SECT_CNT_REG 0x1f2
+#define XLR_PCMCIA_SECT_NUM_REG 0x1f3
+#define XLR_PCMCIA_CYLINDER_LOW_REG 0x1f4
+#define XLR_PCMCIA_CYLINDER_HIGH_REG 0x1f5
+#define XLR_PCMCIA_SECT_DRIVE_HEAD_REG 0x1f6
+#define XLR_PCMCIA_CMD_STATUS_REG 0x1f7
+#define XLR_PCMCIA_ALT_STATUS_REG 0x3f6
+#define XLR_PCMCIA_CONTROL_REG 0x3f6
+
+/*
+ * Device methods
+ */
+static int xlr_pcmcia_probe(device_t);
+static int xlr_pcmcia_attach(device_t);
+static int xlr_pcmcia_detach(device_t);
+
+static int
+xlr_pcmcia_probe(device_t dev)
+{
+ struct ata_channel *ch = device_get_softc(dev);
+
+ ch->unit = 0;
+ ch->flags |= ATA_USE_16BIT | ATA_NO_SLAVE ;
+ device_set_desc(dev, "PCMCIA ATA controller");
+
+ return (ata_probe(dev));
+}
+
+/*
+ * We add all the devices which we know about.
+ * The generic attach routine will attach them if they are alive.
+ */
+static int
+xlr_pcmcia_attach(device_t dev)
+{
+ struct ata_channel *ch = device_get_softc(dev);
+ int i;
+ int rid =0;
+ struct resource *mem_res;
+
+
+ mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE);
+ for (i = 0; i < ATA_MAX_RES; i++)
+ ch->r_io[i].res = mem_res;
+
+ /*
+ * CF+ Specification.
+ */
+ ch->r_io[ATA_DATA].offset = XLR_PCMCIA_DATA_REG;
+ ch->r_io[ATA_FEATURE].offset = XLR_PCMCIA_ERROR_REG;
+ ch->r_io[ATA_COUNT].offset = XLR_PCMCIA_SECT_CNT_REG;
+ ch->r_io[ATA_SECTOR].offset = XLR_PCMCIA_SECT_NUM_REG;
+ ch->r_io[ATA_CYL_LSB].offset = XLR_PCMCIA_CYLINDER_LOW_REG;
+ ch->r_io[ATA_CYL_MSB].offset = XLR_PCMCIA_CYLINDER_HIGH_REG;
+ ch->r_io[ATA_DRIVE].offset = XLR_PCMCIA_SECT_DRIVE_HEAD_REG;
+ ch->r_io[ATA_COMMAND].offset = XLR_PCMCIA_CMD_STATUS_REG;
+ ch->r_io[ATA_ERROR].offset = XLR_PCMCIA_ERROR_REG;
+ ch->r_io[ATA_IREASON].offset = XLR_PCMCIA_SECT_CNT_REG;
+ ch->r_io[ATA_STATUS].offset = XLR_PCMCIA_CMD_STATUS_REG;
+ ch->r_io[ATA_ALTSTAT].offset = XLR_PCMCIA_ALT_STATUS_REG;
+ ch->r_io[ATA_CONTROL].offset = XLR_PCMCIA_CONTROL_REG;
+
+ /* Should point at the base of registers. */
+ ch->r_io[ATA_IDX_ADDR].offset = XLR_PCMCIA_DATA_REG;
+
+ ata_generic_hw(dev);
+
+ return (ata_attach(dev));
+}
+
+static int
+xlr_pcmcia_detach(device_t dev)
+{
+ bus_generic_detach(dev);
+
+ return (0);
+}
+
+static device_method_t xlr_pcmcia_methods[] = {
+ /* device interface */
+ DEVMETHOD(device_probe, xlr_pcmcia_probe),
+ DEVMETHOD(device_attach, xlr_pcmcia_attach),
+ DEVMETHOD(device_detach, xlr_pcmcia_detach),
+
+ { 0, 0 }
+};
+
+static driver_t xlr_pcmcia_driver = {
+ "ata",
+ xlr_pcmcia_methods,
+ sizeof(struct ata_channel),
+};
+
+DRIVER_MODULE(ata, iodi, xlr_pcmcia_driver, ata_devclass, 0, 0);
More information about the svn-src-all
mailing list