svn commit: r211648 - head/sys/pci

Pyun YongHyeon yongari at FreeBSD.org
Sun Aug 22 21:26:36 UTC 2010


Author: yongari
Date: Sun Aug 22 21:26:35 2010
New Revision: 211648
URL: http://svn.freebsd.org/changeset/base/211648

Log:
  It seems some newer RTL8139 controllers provides only memory space
  register mapping. I'm not sure whether it comes from the fact that
  controllers live behind certain PCI brdge(PLX PCI 6152 33BC) and
  the bridge has some issues in handling I/O space register mapping.
  Unfortunately it's not possible to narrow down to an exact
  controller that shows this issue because RealTek used the same PCI
  device/revision id again. In theory, it's possible to check parent
  PCI bridge device and change rl(4) to use memory space register
  mapping if the parent PCI bridge is PLX PCI 6152. But I didn't try
  to do that and we wouldn't get much benefit with added complexity.
  
  Blindly switching to use memory space register mapping for rl(4)
  may make most old controllers not to work. At least, I don't want
  to take potential risk from such change. So use I/O space register
  mapping by default but give users chance to override it via a
  tunable. The tunable to use memory space register mapping would be
  given by adding the following line to /boot/loader.conf file.
  
  dev.rl.%d.prefer_iomap="0"
  
  This change makes P811B quad-port work with this tunable.
  
  Tested by:	Nikola Kalpazanov ( n.kalpazanov <> gmail dot com )
  MFC after:	1 week

Modified:
  head/sys/pci/if_rl.c

Modified: head/sys/pci/if_rl.c
==============================================================================
--- head/sys/pci/if_rl.c	Sun Aug 22 21:25:21 2010	(r211647)
+++ head/sys/pci/if_rl.c	Sun Aug 22 21:26:35 2010	(r211648)
@@ -125,16 +125,6 @@ MODULE_DEPEND(rl, miibus, 1, 1, 1);
 /* "device miibus" required.  See GENERIC if you get errors here. */
 #include "miibus_if.h"
 
-/*
- * Default to using PIO access for this driver. On SMP systems,
- * there appear to be problems with memory mapped mode: it looks like
- * doing too many memory mapped access back to back in rapid succession
- * can hang the bus. I'm inclined to blame this on crummy design/construction
- * on the part of RealTek. Memory mapped mode does appear to work on
- * uniprocessor systems though.
- */
-#define RL_USEIOSPACE
-
 #include <pci/if_rlreg.h>
 
 /*
@@ -225,14 +215,6 @@ static void rl_watchdog(struct rl_softc 
 static void rl_setwol(struct rl_softc *);
 static void rl_clrwol(struct rl_softc *);
 
-#ifdef RL_USEIOSPACE
-#define RL_RES			SYS_RES_IOPORT
-#define RL_RID			RL_PCI_LOIO
-#else
-#define RL_RES			SYS_RES_MEMORY
-#define RL_RID			RL_PCI_LOMEM
-#endif
-
 static device_method_t rl_methods[] = {
 	/* Device interface */
 	DEVMETHOD(device_probe,		rl_probe),
@@ -806,7 +788,7 @@ rl_attach(device_t dev)
 	struct sysctl_ctx_list	*ctx;
 	struct sysctl_oid_list	*children;
 	int			error = 0, hwrev, i, pmc, rid;
-	int			unit;
+	int			prefer_iomap, unit;
 	uint16_t		rl_did = 0;
 	char			tn[32];
 
@@ -828,10 +810,31 @@ rl_attach(device_t dev)
 
 	pci_enable_busmaster(dev);
 
-	/* Map control/status registers. */
-	rid = RL_RID;
-	sc->rl_res = bus_alloc_resource_any(dev, RL_RES, &rid, RF_ACTIVE);
 
+	/*
+	 * Map control/status registers.
+	 * Default to using PIO access for this driver. On SMP systems,
+	 * there appear to be problems with memory mapped mode: it looks
+	 * like doing too many memory mapped access back to back in rapid
+	 * succession can hang the bus. I'm inclined to blame this on
+	 * crummy design/construction on the part of RealTek. Memory
+	 * mapped mode does appear to work on uniprocessor systems though.
+	 */
+	prefer_iomap = 1;
+	snprintf(tn, sizeof(tn), "dev.rl.%d.prefer_iomap", unit);
+	TUNABLE_INT_FETCH(tn, &prefer_iomap);
+	if (prefer_iomap) {
+		sc->rl_res_id = PCIR_BAR(0);
+		sc->rl_res_type = SYS_RES_IOPORT;
+		sc->rl_res = bus_alloc_resource_any(dev, sc->rl_res_type,
+		    &sc->rl_res_id, RF_ACTIVE);
+	}
+	if (prefer_iomap == 0 || sc->rl_res == NULL) {
+		sc->rl_res_id = PCIR_BAR(1);
+		sc->rl_res_type = SYS_RES_MEMORY;
+		sc->rl_res = bus_alloc_resource_any(dev, sc->rl_res_type,
+		    &sc->rl_res_id, RF_ACTIVE);
+	}
 	if (sc->rl_res == NULL) {
 		device_printf(dev, "couldn't map ports/memory\n");
 		error = ENXIO;
@@ -1029,7 +1032,8 @@ rl_detach(device_t dev)
 	if (sc->rl_irq[0])
 		bus_release_resource(dev, SYS_RES_IRQ, 0, sc->rl_irq[0]);
 	if (sc->rl_res)
-		bus_release_resource(dev, RL_RES, RL_RID, sc->rl_res);
+		bus_release_resource(dev, sc->rl_res_type, sc->rl_res_id,
+		    sc->rl_res);
 
 	if (ifp)
 		if_free(ifp);


More information about the svn-src-all mailing list