svn commit: r194845 - in head/sys/arm: conf mv mv/discovery
mv/kirkwood mv/orion
Rafal Jaworowski
raj at FreeBSD.org
Wed Jun 24 15:41:19 UTC 2009
Author: raj
Date: Wed Jun 24 15:41:18 2009
New Revision: 194845
URL: http://svn.freebsd.org/changeset/base/194845
Log:
Introduce ata(4) support for Marvell integrated SATA controllers (found on
88F5xxx, 88F6xxx and MV78xxx system on chip devices).
Reviewed by: stas
Obtained from: Semihalf
Added:
head/sys/arm/mv/mv_sata.c (contents, props changed)
Modified:
head/sys/arm/conf/DB-78XXX
head/sys/arm/conf/DB-88F5XXX
head/sys/arm/conf/DB-88F6XXX
head/sys/arm/mv/discovery/discovery.c
head/sys/arm/mv/files.mv
head/sys/arm/mv/kirkwood/kirkwood.c
head/sys/arm/mv/mvreg.h
head/sys/arm/mv/orion/orion.c
Modified: head/sys/arm/conf/DB-78XXX
==============================================================================
--- head/sys/arm/conf/DB-78XXX Wed Jun 24 15:38:17 2009 (r194844)
+++ head/sys/arm/conf/DB-78XXX Wed Jun 24 15:41:18 2009 (r194845)
@@ -77,3 +77,7 @@ device da
device iic
device iicbus
device ds133x
+
+# SATA
+device ata
+device atadisk
Modified: head/sys/arm/conf/DB-88F5XXX
==============================================================================
--- head/sys/arm/conf/DB-88F5XXX Wed Jun 24 15:38:17 2009 (r194844)
+++ head/sys/arm/conf/DB-88F5XXX Wed Jun 24 15:41:18 2009 (r194845)
@@ -79,3 +79,7 @@ device umass
device scbus
device pass
device da
+
+# SATA
+device ata
+device atadisk
Modified: head/sys/arm/conf/DB-88F6XXX
==============================================================================
--- head/sys/arm/conf/DB-88F6XXX Wed Jun 24 15:38:17 2009 (r194844)
+++ head/sys/arm/conf/DB-88F6XXX Wed Jun 24 15:41:18 2009 (r194845)
@@ -76,3 +76,7 @@ device da
# I2C (TWSI)
device iic
device iicbus
+
+# SATA
+device ata
+device atadisk
Modified: head/sys/arm/mv/discovery/discovery.c
==============================================================================
--- head/sys/arm/mv/discovery/discovery.c Wed Jun 24 15:38:17 2009 (r194844)
+++ head/sys/arm/mv/discovery/discovery.c Wed Jun 24 15:41:18 2009 (r194845)
@@ -130,6 +130,11 @@ struct obio_device obio_devices[] = {
{ -1 }, { -1 },
CPU_PM_CTRL_NONE
},
+ { "sata", MV_SATAHC_BASE, MV_SATAHC_SIZE,
+ { MV_INT_SATA, -1 },
+ { -1 },
+ CPU_PM_CTRL_SATA0 | CPU_PM_CTRL_SATA1
+ },
{ NULL, 0, 0, { 0 }, { 0 }, 0 }
};
Modified: head/sys/arm/mv/files.mv
==============================================================================
--- head/sys/arm/mv/files.mv Wed Jun 24 15:38:17 2009 (r194844)
+++ head/sys/arm/mv/files.mv Wed Jun 24 15:41:18 2009 (r194845)
@@ -24,6 +24,7 @@ arm/mv/gpio.c standard
arm/mv/ic.c standard
arm/mv/mv_machdep.c standard
arm/mv/mv_pci.c optional pci
+arm/mv/mv_sata.c optional ata | atamvsata
arm/mv/obio.c standard
arm/mv/timer.c standard
arm/mv/twsi.c optional iicbus
Modified: head/sys/arm/mv/kirkwood/kirkwood.c
==============================================================================
--- head/sys/arm/mv/kirkwood/kirkwood.c Wed Jun 24 15:38:17 2009 (r194844)
+++ head/sys/arm/mv/kirkwood/kirkwood.c Wed Jun 24 15:41:18 2009 (r194845)
@@ -99,6 +99,11 @@ struct obio_device obio_devices[] = {
{ -1 }, { -1 },
CPU_PM_CTRL_NONE
},
+ { "sata", MV_SATAHC_BASE, MV_SATAHC_SIZE,
+ { MV_INT_SATA, -1 },
+ { -1 },
+ CPU_PM_CTRL_SATA0 | CPU_PM_CTRL_SATA1
+ },
{ NULL, 0, 0, { 0 }, { 0 }, 0 }
};
Added: head/sys/arm/mv/mv_sata.c
==============================================================================
--- /dev/null 00:00:00 1970 (empty, because file is newly added)
+++ head/sys/arm/mv/mv_sata.c Wed Jun 24 15:41:18 2009 (r194845)
@@ -0,0 +1,862 @@
+/*-
+ * Copyright (C) 2008-2009 Semihalf
+ * All rights reserved.
+ *
+ * Initial version developed by Ilya Bakulin. Full functionality and bringup
+ * by Piotr Ziecik.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+#include <sys/param.h>
+#include <sys/bus.h>
+#include <sys/lock.h>
+#include <sys/resource.h>
+#include <sys/systm.h>
+#include <sys/rman.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/mutex.h>
+#include <sys/endian.h>
+#include <sys/sema.h>
+#include <sys/taskqueue.h>
+#include <vm/uma.h>
+#include <machine/bus.h>
+#include <machine/resource.h>
+
+#include <sys/ata.h>
+#include <dev/ata/ata-all.h>
+
+#include "ata_if.h"
+
+#include "mvreg.h"
+#include "mvvar.h"
+
+/* Useful macros */
+#define EDMA_TIMEOUT 100000 /* 100 ms */
+#define SATA_INL(sc, reg) ATA_INL((sc)->sc_mem_res, reg)
+#define SATA_OUTL(sc, reg, val) ATA_OUTL((sc)->sc_mem_res, reg, val)
+
+/* HW-related data structures */
+struct sata_prdentry {
+ uint32_t prd_addrlo;
+ uint32_t prd_count;
+ uint32_t prd_addrhi;
+ uint32_t prd_reserved;
+};
+
+struct sata_crqb {
+ uint32_t crqb_prdlo;
+ uint32_t crqb_prdhi;
+ uint32_t crqb_flags;
+ uint16_t crqb_count;
+ uint16_t crqb_reserved1[2];
+ uint8_t crqb_ata_command;
+ uint8_t crqb_ata_feature;
+ uint8_t crqb_ata_lba_low;
+ uint8_t crqb_ata_lba_mid;
+ uint8_t crqb_ata_lba_high;
+ uint8_t crqb_ata_device;
+ uint8_t crqb_ata_lba_low_p;
+ uint8_t crqb_ata_lba_mid_p;
+ uint8_t crqb_ata_lba_high_p;
+ uint8_t crqb_ata_feature_p;
+ uint8_t crqb_ata_count;
+ uint8_t crqb_ata_count_p;
+ uint16_t crqb_reserved2;
+};
+
+struct sata_crpb {
+ uint8_t crpb_tag;
+ uint8_t crpb_reserved;
+ uint8_t crpb_edma_status;
+ uint8_t crpb_dev_status;
+ uint32_t crpb_timestamp;
+};
+
+/* Identification section. */
+struct sata_softc {
+ device_t sc_dev;
+ unsigned int sc_version;
+ unsigned int sc_edma_qlen;
+ uint32_t sc_edma_reqis_mask;
+ uint32_t sc_edma_resos_mask;
+ struct resource *sc_mem_res;
+ bus_space_tag_t sc_mem_res_bustag;
+ bus_space_handle_t sc_mem_res_bushdl;
+ struct resource *sc_irq_res;
+ void *sc_irq_cookiep;
+ struct {
+ void (*function)(void *);
+ void *argument;
+ } sc_interrupt[SATA_CHAN_NUM];
+};
+
+/* Controller functions */
+static int sata_probe(device_t dev);
+static int sata_attach(device_t dev);
+static int sata_detach(device_t dev);
+static void sata_intr(void*);
+static struct resource * sata_alloc_resource(device_t dev, device_t child,
+ int type, int *rid, u_long start, u_long end, u_long count, u_int flags);
+static int sata_release_resource(device_t dev, device_t child, int type,
+ int rid, struct resource *r);
+static int sata_setup_intr(device_t dev, device_t child,
+ struct resource *irq, int flags, driver_filter_t *filt,
+ driver_intr_t *function, void *argument, void **cookiep);
+static int sata_teardown_intr(device_t dev, device_t child,
+ struct resource *irq, void *cookie);
+
+/* Channel functions */
+static int sata_channel_probe(device_t dev);
+static int sata_channel_attach(device_t dev);
+static int sata_channel_detach(device_t dev);
+static int sata_channel_begin_transaction(struct ata_request *request);
+static int sata_channel_end_transaction(struct ata_request *request);
+static int sata_channel_status(device_t dev);
+static void sata_channel_setmode(device_t parent, device_t dev);
+static void sata_channel_reset(device_t dev);
+static void sata_channel_dmasetprd(void *xsc, bus_dma_segment_t *segs,
+ int nsegs, int error);
+
+/* EDMA functions */
+static int sata_edma_ctrl(device_t dev, int on);
+static int sata_edma_is_running(device_t);
+
+static device_method_t sata_methods[] = {
+ /* Device method */
+ DEVMETHOD(device_probe, sata_probe),
+ DEVMETHOD(device_attach, sata_attach),
+ DEVMETHOD(device_detach, sata_detach),
+ DEVMETHOD(device_shutdown, bus_generic_shutdown),
+ DEVMETHOD(device_suspend, bus_generic_suspend),
+ DEVMETHOD(device_resume, bus_generic_resume),
+
+ /* ATA bus methods. */
+ DEVMETHOD(bus_alloc_resource, sata_alloc_resource),
+ DEVMETHOD(bus_release_resource, sata_release_resource),
+ DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
+ DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
+ DEVMETHOD(bus_setup_intr, sata_setup_intr),
+ DEVMETHOD(bus_teardown_intr, sata_teardown_intr),
+ { 0, 0 },
+};
+
+static driver_t sata_driver = {
+ "sata",
+ sata_methods,
+ sizeof(struct sata_softc),
+};
+
+devclass_t sata_devclass;
+
+DRIVER_MODULE(sata, mbus, sata_driver, sata_devclass, 0, 0);
+MODULE_VERSION(sata, 1);
+MODULE_DEPEND(sata, ata, 1, 1, 1);
+
+static int
+sata_probe(device_t dev)
+{
+ struct sata_softc *sc;
+ uint32_t d, r;
+
+ soc_id(&d, &r);
+ sc = device_get_softc(dev);
+
+ /* No SATA controller on the 88F5281 SoC */
+ if (d == MV_DEV_88F5281)
+ return (ENXIO);
+
+ switch(d) {
+ case MV_DEV_88F5182:
+ sc->sc_version = 1;
+ sc->sc_edma_qlen = 128;
+ break;
+ case MV_DEV_88F6281:
+ case MV_DEV_MV78100:
+ case MV_DEV_MV78100_Z0:
+ sc->sc_version = 2;
+ sc->sc_edma_qlen = 32;
+ break;
+ default:
+ device_printf(dev, "unsupported SoC (ID: 0x%08X)!\n", d);
+ return (ENXIO);
+ }
+
+ sc->sc_edma_reqis_mask = (sc->sc_edma_qlen - 1) << SATA_EDMA_REQIS_OFS;
+ sc->sc_edma_resos_mask = (sc->sc_edma_qlen - 1) << SATA_EDMA_RESOS_OFS;
+
+ device_set_desc(dev, "Marvell Integrated SATA Controller");
+ return (0);
+}
+
+static int
+sata_attach(device_t dev)
+{
+ struct sata_softc *sc;
+ int mem_id, irq_id, error, i;
+ device_t ata_chan;
+ uint32_t reg;
+
+ sc = device_get_softc(dev);
+ sc->sc_dev = dev;
+ mem_id = 0;
+ irq_id = 0;
+
+ /* Allocate resources */
+ sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
+ &mem_id, RF_ACTIVE);
+ if (sc->sc_mem_res == NULL) {
+ device_printf(dev, "could not allocate memory.\n");
+ return (ENOMEM);
+ }
+
+ sc->sc_mem_res_bustag = rman_get_bustag(sc->sc_mem_res);
+ sc->sc_mem_res_bushdl = rman_get_bushandle(sc->sc_mem_res);
+ KASSERT(sc->sc_mem_res_bustag && sc->sc_mem_res_bushdl,
+ ("cannot get bus handle or tag."));
+
+ sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &irq_id,
+ RF_ACTIVE);
+ if (sc->sc_irq_res == NULL) {
+ device_printf(dev, "could not allocate IRQ.\n");
+ error = ENOMEM;
+ goto err;
+ }
+
+ error = bus_setup_intr(dev, sc->sc_irq_res,
+ INTR_TYPE_BIO | INTR_MPSAFE | INTR_ENTROPY,
+ NULL, sata_intr, sc, &sc->sc_irq_cookiep);
+ if (error != 0) {
+ device_printf(dev, "could not setup interrupt.\n");
+ goto err;
+ }
+
+ /* Attach channels */
+ for (i = 0; i < SATA_CHAN_NUM; i++) {
+ ata_chan = device_add_child(dev, "ata",
+ devclass_find_free_unit(ata_devclass, 0));
+
+ if (!ata_chan) {
+ device_printf(dev, "cannot add channel %d.\n", i);
+ error = ENOMEM;
+ goto err;
+ }
+ }
+
+ /* Disable interrupt coalescing */
+ reg = SATA_INL(sc, SATA_CR);
+ for (i = 0; i < SATA_CHAN_NUM; i++)
+ reg |= SATA_CR_COALDIS(i);
+
+ /* Disable DMA byte swapping */
+ if (sc->sc_version == 2)
+ reg |= SATA_CR_NODMABS | SATA_CR_NOEDMABS |
+ SATA_CR_NOPRDPBS;
+
+ SATA_OUTL(sc, SATA_CR, reg);
+
+ /* Clear and mask all interrupts */
+ SATA_OUTL(sc, SATA_ICR, 0);
+ SATA_OUTL(sc, SATA_MIMR, 0);
+
+ return(bus_generic_attach(dev));
+
+err:
+ sata_detach(dev);
+ return (error);
+}
+
+static int
+sata_detach(device_t dev)
+{
+ struct sata_softc *sc;
+
+ sc = device_get_softc(dev);
+
+ if (device_is_attached(dev))
+ bus_generic_detach(dev);
+
+ if (sc->sc_mem_res != NULL) {
+ bus_release_resource(dev, SYS_RES_MEMORY,
+ rman_get_rid(sc->sc_mem_res), sc->sc_mem_res);
+ sc->sc_mem_res = NULL;
+ }
+
+ if (sc->sc_irq_res != NULL) {
+ bus_teardown_intr(dev, sc->sc_irq_res, sc->sc_irq_cookiep);
+ bus_release_resource(dev, SYS_RES_IRQ,
+ rman_get_rid(sc->sc_irq_res), sc->sc_irq_res);
+ sc->sc_irq_res = NULL;
+ }
+
+ return (0);
+}
+
+static struct resource *
+sata_alloc_resource(device_t dev, device_t child, int type, int *rid,
+ u_long start, u_long end, u_long count, u_int flags)
+{
+ struct sata_softc *sc;
+
+ sc = device_get_softc(dev);
+
+ KASSERT(type == SYS_RES_IRQ && *rid == ATA_IRQ_RID,
+ ("illegal resource request (type %u, rid %u).",
+ type, *rid));
+
+ return (sc->sc_irq_res);
+}
+
+static int
+sata_release_resource(device_t dev, device_t child, int type, int rid,
+ struct resource *r)
+{
+
+ KASSERT(type == SYS_RES_IRQ && rid == ATA_IRQ_RID,
+ ("strange type %u and/or rid %u while releasing resource.", type,
+ rid));
+
+ return (0);
+}
+
+static int
+sata_setup_intr(device_t dev, device_t child, struct resource *irq, int flags,
+ driver_filter_t *filt, driver_intr_t *function, void *argument,
+ void **cookiep)
+{
+ struct sata_softc *sc;
+ struct ata_channel *ch;
+
+ sc = device_get_softc(dev);
+ ch = device_get_softc(child);
+
+ if (filt != NULL) {
+ device_printf(dev, "filter interrupts are not supported.\n");
+ return (EINVAL);
+ }
+
+ sc->sc_interrupt[ch->unit].function = function;
+ sc->sc_interrupt[ch->unit].argument = argument;
+ *cookiep = sc;
+
+ return (0);
+}
+
+static int
+sata_teardown_intr(device_t dev, device_t child, struct resource *irq,
+ void *cookie)
+{
+ struct sata_softc *sc;
+ struct ata_channel *ch;
+
+ sc = device_get_softc(dev);
+ ch = device_get_softc(child);
+
+ sc->sc_interrupt[ch->unit].function = NULL;
+ sc->sc_interrupt[ch->unit].argument = NULL;
+
+ return (0);
+}
+
+static void
+sata_intr(void *xsc)
+{
+ struct sata_softc *sc;
+ int unit;
+
+ sc = xsc;
+
+ /*
+ * Behave like ata_generic_intr() for PCI controllers.
+ * Simply invoke ISRs on all channels.
+ */
+ for (unit = 0; unit < SATA_CHAN_NUM; unit++)
+ if (sc->sc_interrupt[unit].function != NULL)
+ sc->sc_interrupt[unit].function(
+ sc->sc_interrupt[unit].argument);
+}
+
+static int
+sata_channel_probe(device_t dev)
+{
+
+ device_set_desc(dev, "Marvell Integrated SATA Channel");
+ return (ata_probe(dev));
+}
+
+static int
+sata_channel_attach(device_t dev)
+{
+ struct sata_softc *sc;
+ struct ata_channel *ch;
+ uint64_t work;
+ int error, i;
+
+ sc = device_get_softc(device_get_parent(dev));
+ ch = device_get_softc(dev);
+
+ if (ch->attached)
+ return (0);
+
+ ch->dev = dev;
+ ch->unit = device_get_unit(dev);
+ ch->flags |= ATA_USE_16BIT | ATA_NO_SLAVE;
+
+ /* Set legacy ATA resources. */
+ for (i = ATA_DATA; i <= ATA_COMMAND; i++) {
+ ch->r_io[i].res = sc->sc_mem_res;
+ ch->r_io[i].offset = SATA_SHADOWR_BASE(ch->unit) + (i << 2);
+ }
+
+ ch->r_io[ATA_CONTROL].res = sc->sc_mem_res;
+ ch->r_io[ATA_CONTROL].offset = SATA_SHADOWR_CONTROL(ch->unit);
+
+ ch->r_io[ATA_IDX_ADDR].res = sc->sc_mem_res;
+ ata_default_registers(dev);
+
+ /* Set SATA resources. */
+ ch->r_io[ATA_SSTATUS].res = sc->sc_mem_res;
+ ch->r_io[ATA_SSTATUS].offset = SATA_SATA_SSTATUS(ch->unit);
+ ch->r_io[ATA_SERROR].res = sc->sc_mem_res;
+ ch->r_io[ATA_SERROR].offset = SATA_SATA_SERROR(ch->unit);
+ ch->r_io[ATA_SCONTROL].res = sc->sc_mem_res;
+ ch->r_io[ATA_SCONTROL].offset = SATA_SATA_SCONTROL(ch->unit);
+ ata_generic_hw(dev);
+
+ ch->hw.begin_transaction = sata_channel_begin_transaction;
+ ch->hw.end_transaction = sata_channel_end_transaction;
+ ch->hw.status = sata_channel_status;
+
+ /* Set DMA resources */
+ ata_dmainit(dev);
+ ch->dma.setprd = sata_channel_dmasetprd;
+
+ /* Clear work area */
+ KASSERT(sc->sc_edma_qlen * (sizeof(struct sata_crqb) +
+ sizeof(struct sata_crpb)) <= ch->dma.max_iosize,
+ ("insufficient DMA memory for request/response queues.\n"));
+ bzero(ch->dma.work, sc->sc_edma_qlen * (sizeof(struct sata_crqb) +
+ sizeof(struct sata_crpb)));
+ bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
+ BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+
+ /* Turn off EDMA engine */
+ error = sata_edma_ctrl(dev, 0);
+ if (error) {
+ ata_dmafini(dev);
+ return (error);
+ }
+
+ /*
+ * Initialize EDMA engine:
+ * - Native Command Queuing off,
+ * - Non-Queued operation,
+ * - Host Queue Cache enabled.
+ */
+ SATA_OUTL(sc, SATA_EDMA_CFG(ch->unit), SATA_EDMA_CFG_HQCACHE |
+ (sc->sc_version == 1) ? SATA_EDMA_CFG_QL128 : 0);
+
+ /* Set request queue pointers */
+ work = ch->dma.work_bus;
+ SATA_OUTL(sc, SATA_EDMA_REQBAHR(ch->unit), work >> 32);
+ SATA_OUTL(sc, SATA_EDMA_REQIPR(ch->unit), work & 0xFFFFFFFF);
+ SATA_OUTL(sc, SATA_EDMA_REQOPR(ch->unit), work & 0xFFFFFFFF);
+
+ /* Set response queue pointers */
+ work += sc->sc_edma_qlen * sizeof(struct sata_crqb);
+ SATA_OUTL(sc, SATA_EDMA_RESBAHR(ch->unit), work >> 32);
+ SATA_OUTL(sc, SATA_EDMA_RESIPR(ch->unit), work & 0xFFFFFFFF);
+ SATA_OUTL(sc, SATA_EDMA_RESOPR(ch->unit), work & 0xFFFFFFFF);
+
+ /* Clear any outstanding interrupts */
+ ATA_IDX_OUTL(ch, ATA_SERROR, ATA_IDX_INL(ch, ATA_SERROR));
+ SATA_OUTL(sc, SATA_SATA_FISICR(ch->unit), 0);
+ SATA_OUTL(sc, SATA_EDMA_IECR(ch->unit), 0);
+ SATA_OUTL(sc, SATA_ICR,
+ ~(SATA_ICR_DEV(ch->unit) | SATA_ICR_DMADONE(ch->unit)));
+
+ /* Umask channel interrupts */
+ SATA_OUTL(sc, SATA_EDMA_IEMR(ch->unit), 0xFFFFFFFF);
+ SATA_OUTL(sc, SATA_MIMR, SATA_INL(sc, SATA_MIMR) |
+ SATA_MICR_DONE(ch->unit) | SATA_MICR_DMADONE(ch->unit) |
+ SATA_MICR_ERR(ch->unit));
+
+ ch->attached = 1;
+
+ return (ata_attach(dev));
+}
+
+static int
+sata_channel_detach(device_t dev)
+{
+ struct sata_softc *sc;
+ struct ata_channel *ch;
+ int error;
+
+ sc = device_get_softc(device_get_parent(dev));
+ ch = device_get_softc(dev);
+
+ if (!ch->attached)
+ return (0);
+
+ /* Turn off EDMA engine */
+ sata_edma_ctrl(dev, 0);
+
+ /* Mask chanel interrupts */
+ SATA_OUTL(sc, SATA_EDMA_IEMR(ch->unit), 0);
+ SATA_OUTL(sc, SATA_MIMR, SATA_INL(sc, SATA_MIMR) & ~(
+ SATA_MICR_DONE(ch->unit) | SATA_MICR_DMADONE(ch->unit) |
+ SATA_MICR_ERR(ch->unit)));
+
+ error = ata_detach(dev);
+ ata_dmafini(dev);
+
+ ch->attached = 0;
+
+ return (error);
+}
+
+static int
+sata_channel_begin_transaction(struct ata_request *request)
+{
+ struct sata_softc *sc;
+ struct ata_channel *ch;
+ struct sata_crqb *crqb;
+ uint32_t req_in;
+ int error, slot;
+
+ sc = device_get_softc(GRANDPARENT(request->dev));
+ ch = device_get_softc(request->parent);
+
+ mtx_assert(&ch->state_mtx, MA_OWNED);
+
+ /* Only DMA R/W goes through the EDMA machine. */
+ if (request->u.ata.command != ATA_READ_DMA &&
+ request->u.ata.command != ATA_WRITE_DMA) {
+
+ /* Disable EDMA before accessing legacy registers */
+ if (sata_edma_is_running(request->parent)) {
+ error = sata_edma_ctrl(request->parent, 0);
+ if (error) {
+ request->result = error;
+ return (ATA_OP_FINISHED);
+ }
+ }
+
+ return (ata_begin_transaction(request));
+ }
+
+ /* Check for 48 bit access and convert if needed */
+ ata_modify_if_48bit(request);
+
+ /* Prepare data for DMA */
+ if ((error = ch->dma.load(request, NULL, NULL))) {
+ device_printf(request->dev, "setting up DMA failed!\n");
+ request->result = error;
+ return ATA_OP_FINISHED;
+ }
+
+ /* Get next free queue slot */
+ req_in = SATA_INL(sc, SATA_EDMA_REQIPR(ch->unit));
+ slot = (req_in & sc->sc_edma_reqis_mask) >> SATA_EDMA_REQIS_OFS;
+ crqb = (struct sata_crqb *)(ch->dma.work +
+ (slot << SATA_EDMA_REQIS_OFS));
+
+ /* Fill in request */
+ bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
+ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
+
+ crqb->crqb_prdlo = htole32((uint64_t)request->dma->sg_bus & 0xFFFFFFFF);
+ crqb->crqb_prdhi = htole32((uint64_t)request->dma->sg_bus >> 32);
+ crqb->crqb_flags = htole32((request->flags & ATA_R_READ ? 0x01 : 0x00) |
+ (request->tag << 1));
+
+ crqb->crqb_ata_command = request->u.ata.command;
+ crqb->crqb_ata_feature = request->u.ata.feature;
+ crqb->crqb_ata_lba_low = request->u.ata.lba;
+ crqb->crqb_ata_lba_mid = request->u.ata.lba >> 8;
+ crqb->crqb_ata_lba_high = request->u.ata.lba >> 16;
+ crqb->crqb_ata_device = ((request->u.ata.lba >> 24) & 0x0F) | (1 << 6);
+ crqb->crqb_ata_count = request->u.ata.count;
+
+ bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
+ BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+
+ /* Enable EDMA if disabled */
+ if (!sata_edma_is_running(request->parent)) {
+ error = sata_edma_ctrl(request->parent, 1);
+ if (error) {
+ ch->dma.unload(request);
+ request->result = error;
+ return (ATA_OP_FINISHED);
+ }
+ }
+
+ /* Tell EDMA about new request */
+ req_in = (req_in & ~sc->sc_edma_reqis_mask) | (((slot + 1) <<
+ SATA_EDMA_REQIS_OFS) & sc->sc_edma_reqis_mask);
+
+ SATA_OUTL(sc, SATA_EDMA_REQIPR(ch->unit), req_in);
+
+ return (ATA_OP_CONTINUES);
+}
+
+static int
+sata_channel_end_transaction(struct ata_request *request)
+{
+ struct sata_softc *sc;
+ struct ata_channel *ch;
+ struct sata_crpb *crpb;
+ uint32_t res_in, res_out, icr;
+ int slot;
+
+ sc = device_get_softc(GRANDPARENT(request->dev));
+ ch = device_get_softc(request->parent);
+
+ mtx_assert(&ch->state_mtx, MA_OWNED);
+
+ icr = SATA_INL(sc, SATA_ICR);
+ if (icr & SATA_ICR_DMADONE(ch->unit)) {
+ /* Get current response slot */
+ res_out = SATA_INL(sc, SATA_EDMA_RESOPR(ch->unit));
+ slot = (res_out & sc->sc_edma_resos_mask) >>
+ SATA_EDMA_RESOS_OFS;
+ crpb = (struct sata_crpb *)(ch->dma.work +
+ (sc->sc_edma_qlen * sizeof(struct sata_crqb)) +
+ (slot << SATA_EDMA_RESOS_OFS));
+
+ /* Record this request status */
+ bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
+ BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
+
+ request->status = crpb->crpb_dev_status;
+ request->error = 0;
+
+ bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
+ BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+
+ /* Update response queue pointer */
+ res_out = (res_out & ~sc->sc_edma_resos_mask) | (((slot + 1) <<
+ SATA_EDMA_RESOS_OFS) & sc->sc_edma_resos_mask);
+
+ SATA_OUTL(sc, SATA_EDMA_RESOPR(ch->unit), res_out);
+
+ /* Ack DMA interrupt if there is nothing more to do */
+ res_in = SATA_INL(sc, SATA_EDMA_RESIPR(ch->unit));
+ res_in &= sc->sc_edma_resos_mask;
+ res_out &= sc->sc_edma_resos_mask;
+
+ if (res_in == res_out)
+ SATA_OUTL(sc, SATA_ICR,
+ ~SATA_ICR_DMADONE(ch->unit));
+
+ /* Update progress */
+ if (!(request->status & ATA_S_ERROR) &&
+ !(request->flags & ATA_R_TIMEOUT))
+ request->donecount = request->bytecount;
+
+ /* Unload DMA data */
+ ch->dma.unload(request);
+
+ return(ATA_OP_FINISHED);
+ }
+
+ /* Legacy ATA interrupt */
+ return (ata_end_transaction(request));
+}
+
+static int
+sata_channel_status(device_t dev)
+{
+ struct sata_softc *sc;
+ struct ata_channel *ch;
+ uint32_t icr, iecr;
+
+ sc = device_get_softc(device_get_parent(dev));
+ ch = device_get_softc(dev);
+
+ icr = SATA_INL(sc, SATA_ICR);
+ iecr = SATA_INL(sc, SATA_EDMA_IECR(ch->unit));
+
+ if ((icr & SATA_ICR_DEV(ch->unit)) || iecr) {
+ /* Disable EDMA before accessing SATA registers */
+ sata_edma_ctrl(dev, 0);
+ ata_sata_phy_check_events(dev);
+
+ /* Ack device and error interrupt */
+ SATA_OUTL(sc, SATA_ICR, ~SATA_ICR_DEV(ch->unit));
+ SATA_OUTL(sc, SATA_EDMA_IECR(ch->unit), 0);
+ }
+
+ icr &= SATA_ICR_DEV(ch->unit) | SATA_ICR_DMADONE(ch->unit);
+ return (icr);
+}
+
+static void
+sata_channel_reset(device_t dev)
+{
+ struct sata_softc *sc;
+ struct ata_channel *ch;
+
+ sc = device_get_softc(device_get_parent(dev));
+ ch = device_get_softc(dev);
+
+ /* Disable EDMA before using legacy registers */
+ sata_edma_ctrl(dev, 0);
+
+ /* Mask all EDMA interrups */
+ SATA_OUTL(sc, SATA_EDMA_IEMR(ch->unit), 0);
+
+ /* Reset EDMA */
+ SATA_OUTL(sc, SATA_EDMA_CMD(ch->unit), SATA_EDMA_CMD_RESET);
+ DELAY(25);
+ SATA_OUTL(sc, SATA_EDMA_CMD(ch->unit), 0);
+
+ /* Reset PHY and device */
+ if (ata_sata_phy_reset(dev, -1, 1))
+ ata_generic_reset(dev);
+ else
+ ch->devices = 0;
+
+ /* Clear EDMA errors */
+ SATA_OUTL(sc, SATA_SATA_FISICR(ch->unit), 0);
+ SATA_OUTL(sc, SATA_EDMA_IECR(ch->unit), 0);
+
+ /* Unmask all EDMA interrups */
+ SATA_OUTL(sc, SATA_EDMA_IEMR(ch->unit), 0xFFFFFFFF);
+}
+
+static void
+sata_channel_setmode(device_t parent, device_t dev)
+{
+ struct ata_device *atadev;
+
+ atadev = device_get_softc(dev);
+
+ /* Disable EDMA before using legacy registers */
+ sata_edma_ctrl(parent, 0);
+
+ ata_sata_setmode(dev, ATA_PIO_MAX);
+ if (atadev->mode >= ATA_DMA)
+ ata_sata_setmode(dev, atadev->mode);
+}
+
+static void
+sata_channel_dmasetprd(void *xsc, bus_dma_segment_t *segs, int nsegs,
+ int error)
+{
+ struct ata_dmasetprd_args *args;
+ struct sata_prdentry *prd;
+ int i;
+
+ args = xsc;
+ prd = args->dmatab;
+
+ if ((args->error = error))
+ return;
+
+ for (i = 0; i < nsegs; i++) {
+ prd[i].prd_addrlo = htole32(segs[i].ds_addr);
+ prd[i].prd_addrhi = htole32((uint64_t)segs[i].ds_addr >> 32);
+ prd[i].prd_count = htole32(segs[i].ds_len);
+ }
+
+ prd[i - 1].prd_count |= htole32(ATA_DMA_EOT);
+ KASSERT(nsegs <= ATA_DMA_ENTRIES, ("too many DMA segment entries.\n"));
+ args->nsegs = nsegs;
+}
+
+static int
+sata_edma_ctrl(device_t dev, int on)
+{
+ struct sata_softc *sc;
+ struct ata_channel *ch;
+ int bit, timeout;
+ uint32_t reg;
+
+ sc = device_get_softc(device_get_parent(dev));
+ ch = device_get_softc(dev);
+ bit = on ? SATA_EDMA_CMD_ENABLE : SATA_EDMA_CMD_DISABLE;
+ timeout = EDMA_TIMEOUT;
+
+ SATA_OUTL(sc, SATA_EDMA_CMD(ch->unit), bit);
+
+ while (1) {
+ DELAY(1);
+
+ reg = SATA_INL(sc, SATA_EDMA_CMD(ch->unit));
+
+ /* Enable bit will be 1 after disable command completion */
+ if (on && (reg & SATA_EDMA_CMD_ENABLE))
+ break;
+
+ /* Disable bit will be 0 after disable command completion */
+ if (!on && !(reg & SATA_EDMA_CMD_DISABLE))
+ break;
+
+ if (timeout-- <= 0) {
+ device_printf(dev, "EDMA command timeout!\n");
+ return (ETIMEDOUT);
+ }
+ }
+
+ return (0);
+}
+
+static int
+sata_edma_is_running(device_t dev)
+{
+ struct sata_softc *sc;
+ struct ata_channel *ch;
+
+ sc = device_get_softc(device_get_parent(dev));
+ ch = device_get_softc(dev);
+
+ return (SATA_INL(sc, SATA_EDMA_CMD(ch->unit)) & SATA_EDMA_CMD_ENABLE);
+}
+
+static device_method_t sata_channel_methods[] = {
+ /* Device interface. */
+ DEVMETHOD(device_probe, sata_channel_probe),
+ DEVMETHOD(device_attach, sata_channel_attach),
+ DEVMETHOD(device_detach, sata_channel_detach),
+ DEVMETHOD(device_shutdown, bus_generic_shutdown),
+ DEVMETHOD(device_suspend, ata_suspend),
+ DEVMETHOD(device_resume, ata_resume),
+
+ /* ATA channel interface */
+ DEVMETHOD(ata_reset, sata_channel_reset),
+ DEVMETHOD(ata_setmode, sata_channel_setmode),
+ { 0, 0 }
+};
+
+driver_t sata_channel_driver = {
+ "ata",
+ sata_channel_methods,
+ sizeof(struct ata_channel),
+};
+
+DRIVER_MODULE(ata, sata, sata_channel_driver, ata_devclass, 0, 0);
Modified: head/sys/arm/mv/mvreg.h
==============================================================================
--- head/sys/arm/mv/mvreg.h Wed Jun 24 15:38:17 2009 (r194844)
+++ head/sys/arm/mv/mvreg.h Wed Jun 24 15:41:18 2009 (r194845)
@@ -274,6 +274,75 @@
#define CPU_TIMER0 0x14
/*
+ * SATA
+ */
+#define SATA_CHAN_NUM 2
+
+#define EDMA_REGISTERS_OFFSET 0x2000
+#define EDMA_REGISTERS_SIZE 0x2000
+#define SATA_EDMA_BASE(ch) (EDMA_REGISTERS_OFFSET + \
+ ((ch) * EDMA_REGISTERS_SIZE))
+
+/* SATAHC registers */
+#define SATA_CR 0x000 /* Configuration Reg. */
+#define SATA_CR_NODMABS (1 << 8)
+#define SATA_CR_NOEDMABS (1 << 9)
+#define SATA_CR_NOPRDPBS (1 << 10)
+#define SATA_CR_COALDIS(ch) (1 << (24 + ch))
+
+#define SATA_ICR 0x014 /* Interrupt Cause Reg. */
+#define SATA_ICR_DMADONE(ch) (1 << (ch))
+#define SATA_ICR_COAL (1 << 4)
+#define SATA_ICR_DEV(ch) (1 << (8 + ch))
+
+#define SATA_MICR 0x020 /* Main Interrupt Cause Reg. */
+#define SATA_MICR_ERR(ch) (1 << (2 * ch))
+#define SATA_MICR_DONE(ch) (1 << ((2 * ch) + 1))
+#define SATA_MICR_DMADONE(ch) (1 << (4 + ch))
+#define SATA_MICR_COAL (1 << 8)
+
+#define SATA_MIMR 0x024 /* Main Interrupt Mask Reg. */
+
+/* Shadow registers */
+#define SATA_SHADOWR_BASE(ch) (SATA_EDMA_BASE(ch) + 0x100)
+#define SATA_SHADOWR_CONTROL(ch) (SATA_EDMA_BASE(ch) + 0x120)
+
+/* SATA registers */
+#define SATA_SATA_SSTATUS(ch) (SATA_EDMA_BASE(ch) + 0x300)
+#define SATA_SATA_SERROR(ch) (SATA_EDMA_BASE(ch) + 0x304)
+#define SATA_SATA_SCONTROL(ch) (SATA_EDMA_BASE(ch) + 0x308)
+#define SATA_SATA_FISICR(ch) (SATA_EDMA_BASE(ch) + 0x364)
+
+/* EDMA registers */
+#define SATA_EDMA_CFG(ch) (SATA_EDMA_BASE(ch) + 0x000)
+#define SATA_EDMA_CFG_QL128 (1 << 19)
+#define SATA_EDMA_CFG_HQCACHE (1 << 22)
+
+#define SATA_EDMA_IECR(ch) (SATA_EDMA_BASE(ch) + 0x008)
+
+#define SATA_EDMA_IEMR(ch) (SATA_EDMA_BASE(ch) + 0x00C)
+#define SATA_EDMA_REQBAHR(ch) (SATA_EDMA_BASE(ch) + 0x010)
+#define SATA_EDMA_REQIPR(ch) (SATA_EDMA_BASE(ch) + 0x014)
+#define SATA_EDMA_REQOPR(ch) (SATA_EDMA_BASE(ch) + 0x018)
+#define SATA_EDMA_RESBAHR(ch) (SATA_EDMA_BASE(ch) + 0x01C)
+#define SATA_EDMA_RESIPR(ch) (SATA_EDMA_BASE(ch) + 0x020)
+#define SATA_EDMA_RESOPR(ch) (SATA_EDMA_BASE(ch) + 0x024)
+
+#define SATA_EDMA_CMD(ch) (SATA_EDMA_BASE(ch) + 0x028)
+#define SATA_EDMA_CMD_ENABLE (1 << 0)
+#define SATA_EDMA_CMD_DISABLE (1 << 1)
+#define SATA_EDMA_CMD_RESET (1 << 2)
+
+#define SATA_EDMA_STATUS(ch) (SATA_EDMA_BASE(ch) + 0x030)
+#define SATA_EDMA_STATUS_IDLE (1 << 7)
*** DIFF OUTPUT TRUNCATED AT 1000 LINES ***
More information about the svn-src-all
mailing list