svn commit: r424857 - in head/www/py-octoprint: . files

[Jan Beich]

Author: jbeich
Date: Fri Oct 28 14:58:53 2016
New Revision: 424857
URL: https://svnweb.freebsd.org/changeset/ports/424857

Log:
  www/py-octoprint: unblock newer py-serial and py-flask-login
  
  - Require py-serial at least 3.2 for arbitrary baud rate support
    on *BSDs, allowing OctoPrint to operate at the natural 250k baud rate
    that a lot of 3D printer firmware defaults to.
  
  PR:		213842
  Submitted by:	Kyle Evans (maintainer)

Modified:
  head/www/py-octoprint/Makefile   (contents, props changed)
  head/www/py-octoprint/files/patch-setup.py   (contents, props changed)

Modified: head/www/py-octoprint/Makefile
==============================================================================
--- head/www/py-octoprint/Makefile	Fri Oct 28 14:58:40 2016	(r424856)
+++ head/www/py-octoprint/Makefile	Fri Oct 28 14:58:53 2016	(r424857)
@@ -2,6 +2,7 @@
 
 PORTNAME=	octoprint
 PORTVERSION=	1.3.0.a
+PORTREVISION=	1
 CATEGORIES=	www python
 PKGNAMEPREFIX=	${PYTHON_PKGNAMEPREFIX}
 
@@ -21,7 +22,7 @@ RUN_DEPENDS=	${PYTHON_PKGNAMEPREFIX}Flas
 		${PYTHON_PKGNAMEPREFIX}Flask-Babel>=0.11.1:devel/py-flask-babel \
 		${PYTHON_PKGNAMEPREFIX}Flask-Assets>=0.12:www/py-flask-assets \
 		${PYTHON_PKGNAMEPREFIX}markdown>=2.6.4:textproc/py-markdown \
-		${PYTHON_PKGNAMEPREFIX}serial>=2.7:comms/py-serial \
+		${PYTHON_PKGNAMEPREFIX}serial>=3.2:comms/py-serial \
 		${PYTHON_PKGNAMEPREFIX}netaddr>=0.7.17:net/py-netaddr \
 		${PYTHON_PKGNAMEPREFIX}watchdog>=0.8.2:devel/py-watchdog \
 		${PYTHON_PKGNAMEPREFIX}sarge>=0.1.4:devel/py-sarge \

Modified: head/www/py-octoprint/files/patch-setup.py
==============================================================================
--- head/www/py-octoprint/files/patch-setup.py	Fri Oct 28 14:58:40 2016	(r424856)
+++ head/www/py-octoprint/files/patch-setup.py	Fri Oct 28 14:58:53 2016	(r424857)
@@ -6,13 +6,14 @@
  	"sockjs-tornado>=1.0.2,<1.1",
 -	"PyYAML>=3.12,<3.13",
 +	"PyYAML>=3.11,<3.13",
- 	"Flask-Login>=0.3,<0.4",
+-	"Flask-Login>=0.3,<0.4",
++	"Flask-Login>=0.3",
  	"Flask-Principal>=0.4,<0.5",
  	"Flask-Babel>=0.11,<0.12",
 @@ -26,15 +26,15 @@ INSTALL_REQUIRES = [
  	"markdown>=2.6.4,<2.7",
 -	"pyserial>=3.1.1,<3.2",
-+	"pyserial>=2.7,<3.2",
++	"pyserial>=3.2",
  	"netaddr>=0.7.17,<0.8",
 -	"watchdog>=0.8.3,<0.9",
 +	"watchdog>=0.8.2,<0.9",