svn commit: r44886 - head/en_US.ISO8859-1/books/handbook/bsdinstall
Dru Lavigne
dru at FreeBSD.org
Tue May 20 18:35:23 UTC 2014
Author: dru
Date: Tue May 20 18:35:23 2014
New Revision: 44886
URL: http://svnweb.freebsd.org/changeset/doc/44886
Log:
Finish up the section on starting the installation.
Sponsored by: iXsystems
Modified:
head/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.xml
Modified: head/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.xml
==============================================================================
--- head/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.xml Tue May 20 17:05:14 2014 (r44885)
+++ head/en_US.ISO8859-1/books/handbook/bsdinstall/chapter.xml Tue May 20 18:35:23 2014 (r44886)
@@ -890,192 +890,14 @@ Ethernet address 0:3:ba:b:92:d4, Host ID
<para>After making the needed selections, press
<keycap>1</keycap> or <keycap>Backspace</keycap> to return to
the main boot menu, then press <keycap>Enter</keycap> to
- continue booting into &os;.</para>
-
- <para>The last few hundred lines that have been displayed on
- screen are stored and can be reviewed.</para>
-
- <para>To review the buffer, press <keycap>Scroll Lock</keycap>.
- This turns on scrolling in the display. Use the arrow keys,
- or <keycap>PageUp</keycap> and <keycap>PageDown</keycap>, to
- view the results. Press <keycap>Scroll Lock</keycap> again to
- stop scrolling.</para>
-
- <para>Do this now, to review the text that scrolled off the
- screen when the kernel was carrying out the device probes.
- Text similar to <xref linkend="bsdinstall-dev-probe"/> will be
- displayed, although the precise text will differ depending on
- the devices in the computer.</para>
-
- <figure xml:id="bsdinstall-dev-probe">
- <title>Typical Device Probe Results</title>
-
- <screen>Copyright (c) 1992-2011 The FreeBSD Project.
-Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
-FreeBSD is a registered trademark of The FreeBSD Foundation.
-FreeBSD 9.0-RELEASE #0 r225473M: Sun Sep 11 16:07:30 BST 2011
- root at psi:/usr/obj/usr/src/sys/GENERIC amd64
-CPU: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz (2527.05-MHz K8-class CPU)
- Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17 Stepping = 6
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
- AMD Features=0x20100800<SYSCALL,NX,LM>
- AMD Features2=0x1<LAHF>
- TSC: P-state invariant, performance statistics
-real memory = 3221225472 (3072 MB)
-avail memory = 2926649344 (2791 MB)
-Event timer "LAPIC" quality 400
-ACPI APIC Table: <TOSHIB A0064 >
-FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
-FreeBSD/SMP: 1 package(s) x 2 core(s)
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 1
-ioapic0: Changing APIC ID to 1
-ioapic0 <Version 2.0> irqs 0-23 on motherboard
-kbd1 at kbdmux0
-acpi0: <TOSHIB A0064> on motherboard
-acpi0: Power Button (fixed)
-acpi0: reservation of 0, a0000 (3) failed
-acpi0: reservation of 100000, b6690000 (3) failed
-Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
-acpi_timer0: <24-bit timer at 3.579545MHz> port 0xd808-0xd80b on acpi0
-cpu0: <ACPI CPU> on acpi0
-ACPI Warning: Incorrect checksum in table [ASF!] - 0xFE, should be 0x9A (20110527/tbutils-282)
-cpu1: <ACPI CPU> on acpi0
-pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
-pci0: <ACPI PCI bus> on pcib0
-vgapci0: <VGA-compatible display> port 0xcff8-0xcfff mem 0xff400000-0xff7fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
-agp0: <Intel GM45 SVGA controller> on vgapci0
-agp0: aperture size is 256M, detected 131068k stolen memory
-vgapci1: <VGA-compatible display> mem 0xffc00000-0xffcfffff at device 2.1 on pci0
-pci0: <simple comms> at device 3.0 (no driver attached)
-em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0xcf80-0xcf9f mem 0xff9c0000-0xff9dffff,0xff9fe000-0xff9fefff irq 20 at device 25.0 on pci0
-em0: Using an MSI interrupt
-em0: Ethernet address: 00:1c:7e:6a:ca:b0
-uhci0: <Intel 82801I (ICH9) USB controller> port 0xcf60-0xcf7f irq 16 at device 26.0 on pci0
-usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
-uhci1: <Intel 82801I (ICH9) USB controller> port 0xcf40-0xcf5f irq 21 at device 26.1 on pci0
-usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
-uhci2: <Intel 82801I (ICH9) USB controller> port 0xcf20-0xcf3f irq 19 at device 26.2 on pci0
-usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
-ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xff9ff800-0xff9ffbff irq 19 at device 26.7 on pci0
-usbus3: EHCI version 1.0
-usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
-hdac0: <Intel 82801I High Definition Audio Controller> mem 0xff9f8000-0xff9fbfff irq 22 at device 27.0 on pci0
-pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
-pci1: <ACPI PCI bus> on pcib1
-iwn0: <Intel(R) WiFi Link 5100> mem 0xff8fe000-0xff8fffff irq 16 at device 0.0 on pci1
-pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
-pci2: <ACPI PCI bus> on pcib2
-pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
-pci4: <ACPI PCI bus> on pcib3
-pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
-pci5: <ACPI PCI bus> on pcib4
-cbb0: <RF5C476 PCI-CardBus Bridge> at device 11.0 on pci5
-cardbus0: <CardBus bus> on cbb0
-pccard0: <16-bit PCCard bus> on cbb0
-isab0: <PCI-ISA bridge> at device 31.0 on pci0
-isa0: <ISA bus> on isab0
-ahci0: <Intel ICH9M AHCI SATA controller> port 0x8f58-0x8f5f,0x8f54-0x8f57,0x8f48-0x8f4f,0x8f44-0x8f47,0x8f20-0x8f3f mem 0xff9fd800-0xff9fdfff irq 19 at device 31.2 on pci0
-ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier not supported
-ahcich0: <AHCI channel> at channel 0 on ahci0
-ahcich1: <AHCI channel> at channel 1 on ahci0
-ahcich2: <AHCI channel> at channel 4 on ahci0
-acpi_lid0: <Control Method Lid Switch> on acpi0
-battery0: <ACPI Control Method Battery> on acpi0
-acpi_button0: <Power Button> on acpi0
-acpi_acad0: <AC Adapter> on acpi0
-acpi_toshiba0: <Toshiba HCI Extras> on acpi0
-acpi_tz0: <Thermal Zone> on acpi0
-attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
-Timecounter "i8254" frequency 1193182 Hz quality 0
-Event timer "i8254" frequency 1193182 Hz quality 100
-atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
-atkbd0: <AT Keyboard> irq 1 on atkbdc0
-kbd0 at atkbd0
-atkbd0: [GIANT-LOCKED]
-psm0: <PS/2 Mouse> irq 12 on atkbdc0
-psm0: [GIANT-LOCKED]
-psm0: model GlidePoint, device ID 0
-atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
-Event timer "RTC" frequency 32768 Hz quality 0
-hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
-Timecounter "HPET" frequency 14318180 Hz quality 950
-Event timer "HPET" frequency 14318180 Hz quality 450
-Event timer "HPET1" frequency 14318180 Hz quality 440
-Event timer "HPET2" frequency 14318180 Hz quality 440
-Event timer "HPET3" frequency 14318180 Hz quality 440
-uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
-sc0: <System console> at flags 0x100 on isa0
-sc0: VGA <16 virtual consoles, flags=0x300>
-vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
-ppc0: cannot reserve I/O port range
-est0: <Enhanced SpeedStep Frequency Control> on cpu0
-p4tcc0: <CPU Frequency Thermal Control> on cpu0
-est1: <Enhanced SpeedStep Frequency Control> on cpu1
-p4tcc1: <CPU Frequency Thermal Control> on cpu1
-Timecounters tick every 1.000 msec
-hdac0: HDA Codec #0: Realtek ALC268
-hdac0: HDA Codec #1: Lucent/Agere Systems (Unknown)
-pcm0: <HDA Realtek ALC268 PCM #0 Analog> at cad 0 nid 1 on hdac0
-pcm1: <HDA Realtek ALC268 PCM #1 Analog> at cad 0 nid 1 on hdac0
-usbus0: 12Mbps Full Speed USB v1.0
-usbus1: 12Mbps Full Speed USB v1.0
-usbus2: 12Mbps Full Speed USB v1.0
-usbus3: 480Mbps High Speed USB v2.0
-ugen0.1: <Intel> at usbus0
-uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
-ugen1.1: <Intel> at usbus1
-uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
-ugen2.1: <Intel> at usbus2
-uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
-ugen3.1: <Intel> at usbus3
-uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
-uhub0: 2 ports with 2 removable, self powered
-uhub1: 2 ports with 2 removable, self powered
-uhub2: 2 ports with 2 removable, self powered
-uhub3: 6 ports with 6 removable, self powered
-ugen2.2: <vendor 0x0b97> at usbus2
-uhub8: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> on usbus2
-ugen1.2: <Microsoft> at usbus1
-ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
-ada0: <Hitachi HTS543225L9SA00 FBEOC43C> ATA-8 SATA 1.x device
-ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes)
-ada0: Command Queueing enabled
-ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
-ada0: Previously was known as ad4
-ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEyeTM, class 0/0, rev 1.10/3.00, addr 2> on usbus1
-SMP: AP CPU #1 Launched!
-cd0 at ahcich1 bus 0 scbus2 target 0 lun 0
-cd0: <TEAC DV-W28S-RT 7.0C> Removable CD-ROM SCSI-0 device
-cd0: 150.000MB/s transfers (SATA 1.x, ums0: 3 buttons and [XYZ] coordinates ID=0
-UDMA2, ATAPI 12bytes, PIO 8192bytes)
-cd0: cd present [1 x 2048 byte records]
-ugen0.2: <Microsoft> at usbus0
-ukbd0: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 2> on usbus0
-kbd2 at ukbd0
-uhid0: <Microsoft Natural Ergonomic Keyboard 4000, class 0/0, rev 2.00/1.73, addr 2> on usbus0
-Trying to mount root from cd9660:/dev/iso9660/FREEBSD_INSTALL [ro]...</screen>
- </figure>
-
- <para>Check the probe results carefully to make sure that &os;
- found all the devices. If a device was not found, it will not
- be listed. Refer to <xref
- linkend="kernelconfig-custom-kernel"/> for instructions on
- how to add in support for devices which are not in the
- <filename>GENERIC</filename> kernel.</para>
-
- <para>After the procedure of device probing, the menu shown in
- <xref linkend="bsdinstall-choose-mode"/> will be displayed.
- The install media can be used in three ways: to install &os;,
- as a live <acronym>CD</acronym> as described in <xref
- linkend="using-live-cd"/>, or to access a &os; shell. Use
- the arrow keys to choose an option, and <keycap>Enter</keycap>
- to select.</para>
+ continue booting into &os;. A series of boot messages will
+ appear as &os; carries out its hardware device probes and
+ loads the installation program. Once the boot is complete,
+ the welcome menu shown in
+ <xref linkend="bsdinstall-choose-mode"/> will be displayed.</para>
<figure xml:id="bsdinstall-choose-mode">
- <title>Selecting Installation Media Mode</title>
+ <title>Welcome Menu</title>
<mediaobject>
<imageobject>
@@ -1084,8 +906,27 @@ Trying to mount root from cd9660:/dev/is
</mediaobject>
</figure>
- <para>Selecting <guibutton>[ Install ]</guibutton>
- here will enter the installer.</para>
+ <para>Press <keycap>Enter</keycap> to select the default of
+ <guibutton>[ Install ]</guibutton> to
+ enter the installer. The rest of this chapter describes how
+ to use this installer. Otherwise, use the right or left arrows
+ or the colorized letter to select the desired menu item. The
+ <guibutton>[ Shell ]</guibutton> can be used to
+ access a &os; shell in order to use command line utilities to
+ prepare the disks before installation. The
+ <guibutton>[ Live CD ]</guibutton> option can be
+ used to try out &os; before installing it. The live version
+ is described in <xref linkend="using-live-cd"/>.</para>
+
+ <tip>
+ <para>To review the boot messages, including the hardware device
+ probe, press the upper- or lower-case <keycap>S</keycap> and
+ then <keycap>Enter</keycap> to access a shell. At the shell
+ prompt, type <command>more /var/run/dmesg.boot</command> and
+ use the space bar to scroll through the messages. When
+ finished, type <command>exit</command> to return to the
+ welcome menu.</para>
+ </tip>
</sect2>
</sect1>
More information about the svn-doc-all
mailing list