PERFORCE change 176552 for review
Rene Ladan
rene at FreeBSD.org
Mon Apr 5 21:10:43 UTC 2010
http://p4web.freebsd.org/chv.cgi?CH=176552
Change 176552 by rene at rene_eee on 2010/04/05 21:10:24
IFC
Affected files ...
.. //depot/projects/docproj_nl/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml#54 integrate
.. //depot/projects/docproj_nl/en_US.ISO8859-1/articles/contributors/contrib.committers.sgml#41 integrate
.. //depot/projects/docproj_nl/en_US.ISO8859-1/share/sgml/authors.ent#33 integrate
.. //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/handbook/advanced-networking/chapter.sgml#43 integrate
.. //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/handbook/mirrors/chapter.sgml#46 edit
.. //depot/projects/docproj_nl/share/pgpkeys/jacula.key#1 branch
.. //depot/projects/docproj_nl/share/pgpkeys/pgpkeys-developers.sgml#33 integrate
.. //depot/projects/docproj_nl/share/pgpkeys/pgpkeys.ent#30 integrate
.. //depot/projects/docproj_nl/www/en/developers.sgml#32 integrate
.. //depot/projects/docproj_nl/www/en/donations/wantlist.sgml#17 integrate
.. //depot/projects/docproj_nl/www/en/multimedia/multimedia-input.xml#7 integrate
.. //depot/projects/docproj_nl/www/en/projects/ideas/ideas.xml#10 integrate
.. //depot/projects/docproj_nl/www/en/releases/7.3R/errata.html#3 integrate
.. //depot/projects/docproj_nl/www/en/releases/8.1R/Makefile#1 branch
.. //depot/projects/docproj_nl/www/en/releases/8.1R/docbook.css#1 branch
.. //depot/projects/docproj_nl/www/en/releases/8.1R/schedule.sgml#1 branch
.. //depot/projects/docproj_nl/www/en/releases/Makefile#6 integrate
.. //depot/projects/docproj_nl/www/en/releng/index.sgml#35 integrate
.. //depot/projects/docproj_nl/www/en/security/security.sgml#12 integrate
.. //depot/projects/docproj_nl/www/share/sgml/news.xml#73 integrate
.. //depot/projects/docproj_nl/www/share/sgml/usergroups.xml#11 integrate
Differences ...
==== //depot/projects/docproj_nl/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml#54 (text+ko) ====
@@ -1,4 +1,4 @@
-<!-- $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml,v 1.906 2010/03/25 07:27:28 niels Exp $ -->
+<!-- $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml,v 1.908 2010/04/05 17:09:48 jacula Exp $ -->
<!--
NOTE TO COMMITTERS: Contributors lists are sorted in alphabetical
order by first name.
@@ -1172,11 +1172,6 @@
</listitem>
<listitem>
- <para>Bernhard Froehlich
- <email>decke at bluelife.at</email></para>
- </listitem>
-
- <listitem>
<para>bf
<email>bf2006a at yahoo.com</email></para>
</listitem>
@@ -4008,11 +4003,6 @@
</listitem>
<listitem>
- <para>Jacula Modyun
- <email>jacula at gmail.com</email></para>
- </listitem>
-
- <listitem>
<para>Jagane D Sundar
<email>jagane at netcom.com</email></para>
</listitem>
==== //depot/projects/docproj_nl/en_US.ISO8859-1/articles/contributors/contrib.committers.sgml#41 (text+ko) ====
@@ -1,4 +1,4 @@
-<!-- $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/contrib.committers.sgml,v 1.288 2010/03/07 20:34:00 niels Exp $ -->
+<!-- $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/contrib.committers.sgml,v 1.290 2010/04/05 17:09:49 jacula Exp $ -->
<!--
NOTE TO NEW COMMITTERS: Core and committers lists are sorted in
alphabetical order by last name. Please keep in mind that fact while
@@ -439,6 +439,10 @@
</listitem>
<listitem>
+ <para>&a.decke;</para>
+ </listitem>
+
+ <listitem>
<para>&a.shige;</para>
</listitem>
@@ -1151,6 +1155,10 @@
</listitem>
<listitem>
+ <para>&a.jacula;</para>
+ </listitem>
+
+ <listitem>
<para>&a.piso;</para>
</listitem>
==== //depot/projects/docproj_nl/en_US.ISO8859-1/share/sgml/authors.ent#33 (text+ko) ====
@@ -13,7 +13,7 @@
builds for the other languages, and we will poke fun of you
in public.
- $FreeBSD: doc/en_US.ISO8859-1/share/sgml/authors.ent,v 1.499 2010/03/04 02:08:02 neel Exp $
+ $FreeBSD: doc/en_US.ISO8859-1/share/sgml/authors.ent,v 1.501 2010/04/05 17:09:49 jacula Exp $
-->
<!ENTITY a.aaron "Aaron Dalton <email>aaron at FreeBSD.org</email>">
@@ -264,6 +264,8 @@
<!ENTITY a.dec "David E. Cross <email>dec at FreeBSD.org</email>">
+<!ENTITY a.decke "Bernhard Fröhlich <email>decke at FreeBSD.org</email>">
+
<!ENTITY a.deischen "Daniel Eischen <email>deischen at FreeBSD.org</email>">
<!ENTITY a.delphij "Xin Li <email>delphij at FreeBSD.org</email>">
@@ -466,6 +468,8 @@
<!ENTITY a.iwasaki "Mitsuru IWASAKI <email>iwasaki at FreeBSD.org</email>">
+<!ENTITY a.jacula "Giuseppe Pilichi <email>jacula at FreeBSD.org</email>">
+
<!ENTITY a.jadawin "Philippe Audeoud <email>jadawin at FreeBSD.org</email>">
<!ENTITY a.jake "Jake Burkholder <email>jake at FreeBSD.org</email>">
==== //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/handbook/advanced-networking/chapter.sgml#43 (text+ko) ====
@@ -1,10 +1,10 @@
<!--
The FreeBSD Dutch Documentation Project
- $FreeBSD: doc/nl_NL.ISO8859-1/books/handbook/advanced-networking/chapter.sgml,v 1.18 2010/01/15 18:36:21 rene Exp $
+ $FreeBSD: doc/nl_NL.ISO8859-1/books/handbook/advanced-networking/chapter.sgml,v 1.19 2010/04/03 21:27:04 rene Exp $
%SOURCE% en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml
- %SRCID% 1.426
+ %SRCID% 1.428
-->
<chapter id="advanced-networking">
@@ -917,8 +917,11 @@
<para>In de rest van dit document zal een &man.ath.4; apparaat
gebruikt worden, de naam van het apparaat in de voorbeelden
dient aangepast te worden aan de lokale installatie. Een
- lijst van beschikbare draadloze stuurprogramma's staat aan
- begin van de hulppagina &man.wlan.4;. Indien er geen
+ lijst van beschikbare draadloze stuurprogramma's en ondersteunde
+ adapters staat in de &os; Hardware Notes. Kopieën hiervan
+ voor verschillende uitgaven en architecturen zijn beschikbaar op
+ de <ulink url="http://www.FreeBSD.org/releases/index.html">Uitgave
+ Informatie</ulink> pagina van de &os; website. Indien er geen
origineel stuurprogramma voor het draadloze apparaat
bestaat, is het mogelijk om te proberen om direct het
stuurprogramma van &windows; proberen te gebruiken met
@@ -926,8 +929,8 @@
linkend="config-network-ndis">NDIS</link>.</para>
</note>
- <para>Nadat het apparaatstuurprogramma is ingesteld is het ook
- nodig om de ondersteuning voor 802.11-netwerken waarvan het
+ <para>Nadat het apparaatstuurprogramma is ingesteld onder &os; 7.X
+ is het ook nodig om de ondersteuning voor 802.11-netwerken waarvan het
stuurprogramma gebruik maakt in te stellen. Voor het
stuurprogramma &man.ath.4; zijn dit minimaal de modules
&man.wlan.4;, <literal>wlan_scan_ap</literal> en
@@ -940,12 +943,9 @@
<programlisting>wlan_scan_ap_load="YES"
wlan_scan_sta_load="YES"</programlisting>
- <note>
- <para>Zowel <literal>wlan_scan_ap</literal> en
- <literal>wlan_scan_sta</literal> zijn nodig voor
- &os; 7.X, voor andere versies van &os; zijn ze niet
- nodig.</para>
- </note>
+ <para>Sinds &os; 8.0 zijn deze modules deel van het
+ basisstuurprogramma &man.wlan.4; dat dynamisch met het stuurprogramma
+ voor de adapter wordt geladen.</para>
<para>Daarvoor zijn ook de modules nodig die cryptografische
ondersteuning implementeren voor de te gebruiken
@@ -981,21 +981,22 @@
volgende regels aan het kernelinstellingenbestand toe te
voegen:</para>
- <programlisting>device ath # Atheros IEEE 802.11 stuurprogramma voor draadloze netwerken
-device ath_hal # Atheros Hardware Access Layer
-options AH_SUPPORT_AR5146 # zet AR5146 tx/rx descriptors aan
-device ath_rate_sample # SampleRate verzendsnelheid-controle voor ath
-device wlan # 802.11 ondersteuning
-device wlan_scan_ap # 802.11 AP-modus scannen
-device wlan_scan_sta # 802.11 STA-modus scannen
+ <programlisting>device wlan # 802.11 ondersteuning
device wlan_wep # 802.11 WEP-ondersteuning
device wlan_ccmp # 802.11 CCMP-ondersteuning
-device wlan_tkip # 802.11 TKIP-ondersteuning</programlisting>
+device wlan_tkip # 802.11 TKIP-ondersteuning
+device wlan_amrr # AMRR controle-algoritme voor zendsnelheid
+device ath # Atheros PCI/Cardbus netwerkkaarten
+device ath_hal # Ondersteuning voor PCI/cardbus chips
+options AH_SUPPORT_AR5146 # zet AR5146 tx/rx descriptors aan
+device ath_rate_sample # SampleRate verzendsnelheid-controle voor ath</programlisting>
- <para>Zowel <literal>wlan_scan_ap</literal> en
- <literal>wlan_scan_sta</literal> zijn nodig voor
+ <para>Beide van de volgende regels zijn nodig voor
&os; 7.X, voor andere versies van &os; zijn ze niet
- nodig.</para>
+ nodig:</para>
+
+ <programlisting>device wlan_scan_ap # 802.11 AP mode scanning
+device wlan_scan_sta # 802.11 STA mode scanning</programlisting>
<para>Met deze informatie in het kernelinstellingenbestand kan
de kernel opnieuw gecompileerd en de &os;-computer opnieuw
@@ -1035,10 +1036,11 @@
moet zoeken. Alleen de super-gebruiker kan zo'n scan
opzetten:</para>
- <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> up scan</userinput>
+ <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput>
+&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> up scan</userinput>
SSID BSSID CHAN RATE S:N INT CAPS
-dlinkap 00:13:46:49:41:76 6 54M 29:3 100 EPS WPA WME
-freebsdap 00:11:95:c3:0d:ac 1 54M 22:1 100 EPS WPA</screen>
+dlinkap 00:13:46:49:41:76 11 54M -90:96 100 EPS WPA WME
+freebsdap 00:11:95:c3:0d:ac 1 54M -83:96 100 EPS WPA</screen>
<note>
<para>De interface dient als up te worden gemarkeerd
@@ -1046,6 +1048,20 @@
niet nodig om de interface als up te markeren.</para>
</note>
+ <note>
+ <para>In &os; 7.X wordt de apparaat-adapter, bijvoorbeeld
+ <devicename><replaceable>ath0</replaceable></devicename>,
+ direct gebruikt in plaats van het apparaat
+ <devicename>wlan</devicename>. Hierom is het nodig om beide
+ vorige regels te vervangen door:</para>
+
+ <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> up scan</userinput></screen>
+
+ <para>In de rest van dit document dient de gebruiker van
+ &os; 7.X de opdracht- en instellingregels volgens dat schema
+ aan te passen.</para>
+ </note>
+
<para>De uitvoer van een scanverzoek vermeld elk gevonden
BSS/IBSS-netwerk. Naast de naam van het netwerk,
<literal>SSID</literal>, staat het <literal>BSSID</literal>,
@@ -1117,7 +1133,7 @@
<para>Het is ook mogelijk om de huidige lijst van bekende
netwerken weer te geven met:</para>
- <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> list scan</userinput></screen>
+ <screen>&prompt.root; <userinput>ifconfig <replaceable>scan0</replaceable> list scan</userinput></screen>
<para>Deze informatie kan automatisch bijgewerkt worden door
de adapter of handmatig met een <option>scan</option>
@@ -1151,13 +1167,22 @@
wordt ingesteld door het te noemen in
<filename>/etc/rc.conf</filename>, bijvoorbeeld:</para>
- <programlisting>ifconfig_ath0="DHCP"</programlisting>
+ <programlisting>wlans_ath0="wlan0"
+ifconfig_wlan0="DHCP"</programlisting>
+
+ <note>
+ <para>Zoals eerder vermeld, is voor &os; 7.X alleen een
+ regel nodig voor de apparaat-adapter:</para>
+
+ <programlisting>ifconfig_ath0="DHCP"</programlisting>
+ </note>
<para>Indien er meerdere toegangspunten zijn en het gewenst
is om een specifieke te kiezen, kan dit met het SSID:
</para>
- <programlisting>ifconfig_ath0="ssid <replaceable>uw_ssid_hier</replaceable> DHCP"</programlisting>
+ <programlisting>wlans_ath0="wlan0"
+ifconfig_wlan0="ssid <replaceable>uw_ssid_hier</replaceable> DHCP"</programlisting>
<para>In een omgeving waar meerdere toegangspunten hetzelfde
SSID hebben (vaak gedaan om roamen eenvoudiger te maken)
@@ -1166,7 +1191,8 @@
BSSID van het toegangspunt gespecificeerd worden (het SSID
kan ook weggelaten worden):</para>
- <programlisting>ifconfig_ath0="ssid <replaceable>uw_ssid_hier</replaceable> bssid <replaceable>xx:xx:xx:xx:xx:xx</replaceable> DHCP</programlisting>
+ <programlisting>wlans_ath0="wlan0"
+ifconfig_wlan0="ssid <replaceable>uw_ssid_hier</replaceable> bssid <replaceable>xx:xx:xx:xx:xx:xx</replaceable> DHCP</programlisting>
<para>Er zijn andere manieren om de keuze van een
toegangspunt te beperken zoals het beperken van het aantal
@@ -1176,7 +1202,8 @@
tot een specifieke band te beperken kan de parameter
<option>mode</option> gebruikt worden; bijvoorbeeld:</para>
- <programlisting>ifconfig_ath0="mode <replaceable>11g</replaceable> ssid <replaceable>uw_ssid_hier</replaceable> DHCP"</programlisting>
+ <programlisting>wlans_ath0="wlan0"
+ifconfig_wlan0="mode <replaceable>11g</replaceable> ssid <replaceable>uw_ssid_hier</replaceable> DHCP"</programlisting>
<para>zal de kaart forceren om te werken in 802.11g welke
alleen voor 2,4GHz frequenties is gedefinieerd dus de 5GHz
@@ -1222,7 +1249,8 @@
toegang met zoiets als het volgende worden
ingesteld:</para>
- <programlisting>ifconfig_ath0="authmode shared wepmode on weptxkey <replaceable>1</replaceable> wepkey <replaceable>01234567</replaceable> DHCP"</programlisting>
+ <programlisting>wlans_ath0="wlan0"
+ifconfig_wlan0="authmode shared wepmode on weptxkey <replaceable>1</replaceable> wepkey <replaceable>01234567</replaceable> DHCP"</programlisting>
<para>Over het algemeen dient authenticatie via gedeelde
sleutels worden voorkomen omdat het het materiaal van de
@@ -1250,7 +1278,8 @@
apparaat toegevoegd te worden zoals in de verschillende
bovenstaande voorbeelden is laten zien:</para>
- <programlisting>ifconfig_ath0="DHCP"</programlisting>
+ <programlisting>wlans_ath0="wlan0"
+ifconfig_wlan0="DHCP"</programlisting>
<para>Op dit moment kan de draadloze interface geactiveerd
worden:</para>
@@ -1262,23 +1291,24 @@
van de interface <devicename>ath0</devicename> te
zien:</para>
- <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable></userinput>
-ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
- inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1
- inet 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255
+ <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
+wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:11:95:d5:43:62
- media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/54Mbps)
+ inet 192.168.1.00 netmask 0xffffff00 broadcast 192.168.1.255
+ media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g
status: associated
- ssid dlinkap channel 6 bssid 00:13:46:49:41:76
- authmode OPEN privacy OFF txpowmax 36 protmode CTS bintval 100</screen>
+ ssid dlinkap channel 11 (2462 Mhz 11g) bssid 00:13:46:49:41:76
+ country US ecm authmode OPEN privacy OFF txpower 21.5 bmiss 7
+ scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7
+ roam:rate 5 protmode CTS wme burst</screen>
<para>Het <literal>status: associated</literal> betekent
dat er verbinding is met een draadloos netwerk (in dit
geval met het netwerk <literal>dlinkap</literal>). Het
gedeelte <literal>bssid 00:13:46:49:41:76</literal> is het
- MAC-adres van het toegangspunt; de regel met
+ MAC-adres van het toegangspunt; de gedeelte met
<literal>authmode</literal> vertelt dat de communicatie
- niet versleuteld (<literal>OPEN</literal>) is.</para>
+ niet versleuteld is.</para>
</sect5>
<sect5>
@@ -1292,7 +1322,8 @@
voor het selecteren van een toegangspunt behouden
blijven:</para>
- <programlisting>ifconfig_ath0="ssid <replaceable>uw_ssid_hier</replaceable> inet <replaceable>192.168.1.100</replaceable> netmask <replaceable>255.255.255.0</replaceable>"</programlisting>
+ <programlisting>wlans_ath0="wlan0"
+ifconfig_wlan0="ssid <replaceable>uw_ssid_hier</replaceable> inet <replaceable>192.168.1.100</replaceable> netmask <replaceable>255.255.255.0</replaceable>"</programlisting>
</sect5>
</sect4>
@@ -1372,27 +1403,29 @@
gebeuren en dat het IP-adres met DHCP zal worden
verkregen:</para>
- <programlisting>ifconfig_ath0="WPA DHCP"</programlisting>
+ <programlisting>wlans_ath0="wlan0"
+ifconfig_wlan0="WPA DHCP"</programlisting>
<para>Hierna kan de interface geactiveerd worden:</para>
<screen>&prompt.root; <userinput><filename>/etc/rc.d/netif</filename> start</userinput>
Starting wpa_supplicant.
-DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 5
-DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 6
+DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 5
+DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6
DHCPOFFER from 192.168.0.1
-DHCPREQUEST on ath0 to 255.255.255.255 port 67
+DHCPREQUEST on wlan0 to 255.255.255.255 port 67
DHCPACK from 192.168.0.1
bound to 192.168.0.254 -- renewal in 300 seconds.
-ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
- inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1
+wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
+ ether 00:11:95:d5:43:62
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
- ether 00:11:95:d5:43:62
- media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/36Mbps)
+ media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g
status: associated
- ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac
- authmode WPA privacy ON deftxkey UNDEF TKIP 2:128-bit txpowmax 36
- protmode CTS roaming MANUAL bintval 100</screen>
+ ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
+ country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF
+ AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
+ bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
+ wme burst roaming MANUAL</screen>
<para>Ook kan gepoogd worden dit handmatig in te stellen
door hetzelfde
@@ -1400,34 +1433,36 @@
linkend="network-wireless-wpa-wpa-psk">hierboven</link>
te gebruiken, en dit te draaien:</para>
- <screen>&prompt.root; <userinput>wpa_supplicant -i <replaceable>ath0</replaceable> -c /etc/wpa_supplicant.conf</userinput>
+ <screen>&prompt.root; <userinput>wpa_supplicant -i <replaceable>wlan0</replaceable> -c /etc/wpa_supplicant.conf</userinput>
Trying to associate with 00:11:95:c3:0d:ac (SSID='freebsdap' freq=2412 MHz)
Associated with 00:11:95:c3:0d:ac
-WPA: Key negotiation completed with 00:11:95:c3:0d:ac [PTK=TKIP GTK=TKIP]</screen>
+WPA: Key negotiation completed with 00:11:95:c3:0d:ac [PTK=CCMP GTK=CCMP]
+CTRL-EVENT-CONNECTED - Connection to 00:11:95:c3:0d:ac completed (auth) [id=0 idstr=]</screen>
<para>De volgende stap is het lanceren van het commando
<command>dhclient</command> om een IP-adres van de
DHCP-server te krijgen:</para>
- <screen>&prompt.root; <userinput>dhclient <replaceable>ath0</replaceable></userinput>
-DHCPREQUEST on ath0 to 255.255.255.255 port 67
+ <screen>&prompt.root; <userinput>dhclient <replaceable>wlan0</replaceable></userinput>
+DHCPREQUEST on wlan0 to 255.255.255.255 port 67
DHCPACK from 192.168.0.1
bound to 192.168.0.254 -- renewal in 300 seconds.
-&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable></userinput>
-ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
- inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1
+&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
+wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
+ ether 00:11:95:d5:43:62
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
- ether 00:11:95:d5:43:62
- media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/48Mbps)
+ media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g
status: associated
- ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac
- authmode WPA privacy ON deftxkey UNDEF TKIP 2:128-bit txpowmax 36
- protmode CTS roaming MANUAL bintval 100</screen>
+ ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
+ country US ecm authmode WPA2/802.11i privacy ON defxkey UNDEF
+ AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
+ bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
+ wme burst roaming MANUAL</screen>
<note>
<para>Indien <filename>/etc/rc.conf</filename> is
ingesteld met de regel
- <literal>ifconfig_ath0="DHCP"</literal> is het niet
+ <literal>ifconfig_wlan0="DHCP"</literal> is het niet
nodig om het commando <command>dhclient</command>
handmatig te draaien, <command>dhclient</command> zal
dan gedraaid worden nadat
@@ -1440,18 +1475,18 @@
nadat <command>wpa_supplicant</command> het station heeft
geauthenticeerd:</para>
- <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> inet <replaceable>192.168.0.100</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput>
-&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable></userinput>
-ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
- inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1
+ <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> inet <replaceable>192.168.0.100</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput>
+&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
+wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
+ ether 00:11:95:d5:43:62
inet 192.168.0.100 netmask 0xffffff00 broadcast 192.168.0.255
- ether 00:11:95:d5:43:62
- media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/36Mbps)
+ media: IEEE 802.11 Wireless Ethernet OFDM/36Mbps mode 11g
status: associated
- ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac
- authmode WPA privacy ON deftxkey UNDEF TKIP 2:128-bit txpowmax 36
- protmode CTS roaming MANUAL bintval 100</screen>
-
+ ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
+ country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF
+ AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
+ bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
+ wme burst roaming MANUAL</screen>
<para>Indien DHCP niet wordt gebruikt, dienen ook de
standaard gateway en de naamserver handmatig ingesteld te
worden:</para>
@@ -1562,29 +1597,31 @@
</callout>
</calloutlist>
- <para>Voeg vervolgens de volgende regel toe aan
+ <para>Voeg vervolgens de volgende regels toe aan
<filename>/etc/rc.conf</filename>:</para>
- <programlisting>ifconfig_ath0="WPA DHCP"</programlisting>
+ <programlisting>wlans_ath0="wlan0"
+ifconfig_wlan0="WPA DHCP"</programlisting>
<para>De volgende stap is het activeren van de interface met
behulp van de faciliteit <filename>rc.c</filename>:</para>
<screen>&prompt.root; <userinput>/etc/rc.d/netif start</userinput>
Starting wpa_supplicant.
-DHCPREQUEST on ath0 to 255.255.255.255 port 67
-DHCPREQUEST on ath0 to 255.255.255.255 port 67
+DHCPREQUEST on wlan0 to 255.255.255.255 port 67
+DHCPREQUEST on wlan0 to 255.255.255.255 port 67
DHCPACK from 192.168.0.20
bound to 192.168.0.254 -- renewal in 300 seconds.
-ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
- inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1
+wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
+ ether 00:11:95:d5:43:62
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
- ether 00:11:95:d5:43:62
- media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
+ media: IEEE 802.11 Wireless Ethernet DS/11Mbps mode 11g
status: associated
- ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac
- authmode WPA2/802.11i privacy ON deftxkey UNDEF TKIP 2:128-bit
- txpowmax 36 protmode CTS roaming MANUAL bintval 100</screen>
+ ssid freebsdap channel 1 (2412 Mhz 11g) bssid 00:11:95:c3:0d:ac
+ country US ecm authmode WPA/802.11i privacy ON deftxkey UNDEF
+ AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
+ bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
+ wme burst roaming MANUAL</screen>
<para>Zoals eerder is laten zien, is het ook mogelijk om de
interface handmatig te activeren met zowel de commando's
@@ -1651,29 +1688,31 @@
</callout>
</calloutlist>
- <para>Ook dient de volgende regel toegevoegd te worden aan
+ <para>Ook dienen de volgende regels toegevoegd te worden aan
<filename>/etc/rc.conf</filename>:</para>
- <programlisting>ifconfig_ath0="WPA DHCP"</programlisting>
+ <programlisting>wlans_ath0="wlan0"
+ifconfig_ath0="WPA DHCP"</programlisting>
<para>De volgende stap is het activeren van de interface:</para>
<screen>&prompt.root; <userinput>/etc/rc.d/netif start</userinput>
Starting wpa_supplicant.
-DHCPREQUEST on ath0 to 255.255.255.255 port 67
-DHCPREQUEST on ath0 to 255.255.255.255 port 67
-DHCPREQUEST on ath0 to 255.255.255.255 port 67
+DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 7
+DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 15
+DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 21
DHCPACK from 192.168.0.20
bound to 192.168.0.254 -- renewal in 300 seconds.
-ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
- inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1
+wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
+ ether 00:11:95:d5:43:62
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
- ether 00:11:95:d5:43:62
- media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
+ media: IEEE 802.11 Wireless Ethernet autoselect DS/11Mbps mode 11g
status: associated
- ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac
- authmode WPA2/802.11i privacy ON deftxkey UNDEF TKIP 2:128-bit
- txpowmax 36 protmode CTS roaming MANUAL bintval 100</screen>
+ ssid freebsdap channel 1 (2412 Mhz) bssid 00:11:95:c3:0d:ac
+ country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF
+ AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
+ bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
+ wme burst roaming MANUAL</screen>
</sect5>
<sect5 id="network-wireless-wpa-eap-peap">
@@ -1764,26 +1803,28 @@
<para>Het volgende dient te worden toegevoegd aan
<filename>/etc/rc.conf</filename>:</para>
- <programlisting>ifconfig_ath0="WPA DHCP"</programlisting>
+ <programlisting>wlans_ath0="wlan0"
+ifconfig_wlan0="WPA DHCP"</programlisting>
<para>Hierna kan de interface worden geactiveerd:</para>
<screen>&prompt.root; <userinput>/etc/rc.d/netif start</userinput>
Starting wpa_supplicant.
-DHCPREQUEST on ath0 to 255.255.255.255 port 67
-DHCPREQUEST on ath0 to 255.255.255.255 port 67
-DHCPREQUEST on ath0 to 255.255.255.255 port 67
+DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 7
+DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 15
+DHCPREQUEST on wlan0 to 255.255.255.255 port 67 interval 21
DHCPACK from 192.168.0.20
bound to 192.168.0.254 -- renewal in 300 seconds.
-ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
- inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1
+wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
+ ether 00:11:95:d5:43:62
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
- ether 00:11:95:d5:43:62
- media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)
+ media: IEEE 802.11 Wireless Ethernet autoselect DS/11Mbps mode 11g
status: associated
- ssid freebsdap channel 1 bssid 00:11:95:c3:0d:ac
- authmode WPA2/802.11i privacy ON deftxkey UNDEF TKIP 2:128-bit
- txpowmax 36 protmode CTS roaming MANUAL bintval 100</screen>
+ ssid freebsdap channel 1 (2412 Mhz) bssid 00:11:95:c3:0d:ac
+ country US ecm authmode WPA2/802.11i privacy ON deftxkey UNDEF
+ AES-CCM 3:128-bit txpower 21.5 bmiss 7 scanvalid 450 bgscan
+ bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5 protmode CTS
+ wme burst roaming MANUAL</screen>
</sect5>
</sect4>
@@ -1798,7 +1839,8 @@
<para>WEP kan worden opgezet met
<command>ifconfig</command>:</para>
- <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> ssid mijn_net wepmode on weptxkey 3 wepkey 3:0x3456789012 \
+ <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput>
+&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> ssid mijn_net wepmode on weptxkey 3 wepkey 3:0x3456789012 \
inet <replaceable>192.168.1.100</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput></screen>
<itemizedlist>
@@ -1848,7 +1890,7 @@
<para>Daarna:</para>
- <screen>&prompt.root; <userinput>wpa_supplicant -i <replaceable>ath0</replaceable> -c /etc/wpa_supplicant.conf</userinput>
+ <screen>&prompt.root; <userinput>wpa_supplicant -i <replaceable>wlan0</replaceable> -c /etc/wpa_supplicant.conf</userinput>
Trying to associate with 00:13:46:49:41:76 (SSID='dlinkap' freq=2437 MHz)
Associated with 00:13:46:49:41:76</screen>
</sect4>
@@ -1866,12 +1908,12 @@
<para>Op machine <hostid>A</hostid>:</para>
- <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> ssid <replaceable>freebsdap</replaceable> mediaopt adhoc inet <replaceable>192.168.0.1</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput>
-&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable></userinput>
- ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
+ <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput>
+&prompt.root; <userinput> ifconfig <replaceable>wlan0</replaceable> ssid <replaceable>freebsdap</replaceable> mediaopt adhoc inet <replaceable>192.168.0.1</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput>
+&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
+ wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
+ ether 00:11:95:c3:0d:ac
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
- inet6 fe80::211:95ff:fec3:dac%ath0 prefixlen 64 scopeid 0x4
- ether 00:11:95:c3:0d:ac
media: IEEE 802.11 Wireless Ethernet autoselect <adhoc> (autoselect <adhoc>)
status: associated
ssid freebsdap channel 2 bssid 02:11:95:c3:0d:ac
@@ -1885,19 +1927,19 @@
<screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> up scan</userinput>
SSID BSSID CHAN RATE S:N INT CAPS
- freebsdap 02:11:95:c3:0d:ac 2 54M 19:3 100 IS</screen>
+ freebsdap 02:11:95:c3:0d:ac 2 54M -90:-96 100 IS</screen>
<para>De <literal>I</literal> in de uitvoer bevestigt dat machine
<hostid>A</hostid> in ad-hoc-modus verkeert. Het is slechts
nodig om <hostid>B</hostid> met een ander IP-adres in te
stellen:</para>
- <screen>&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable> ssid <replaceable>freebsdap</replaceable> mediaopt adhoc inet <replaceable>192.168.0.2</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput>
-&prompt.root; <userinput>ifconfig <replaceable>ath0</replaceable></userinput>
- ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
- inet6 fe80::211:95ff:fed5:4362%ath0 prefixlen 64 scopeid 0x1
+ <screen>&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> create wlandev <replaceable>ath0</replaceable></userinput>
+&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable> ssid <replaceable>freebsdap</replaceable> mediaopt adhoc inet <replaceable>192.168.0.2</replaceable> netmask <replaceable>255.255.255.0</replaceable></userinput>
+&prompt.root; <userinput>ifconfig <replaceable>wlan0</replaceable></userinput>
+ wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
+ ether 00:11:95:d5:43:62
inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255
- ether 00:11:95:d5:43:62
media: IEEE 802.11 Wireless Ethernet autoselect <adhoc> (autoselect <adhoc>)
status: associated
ssid freebsdap channel 2 bssid 02:11:95:c3:0d:ac
==== //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/handbook/mirrors/chapter.sgml#46 (text+ko) ====
@@ -1,11 +1,11 @@
<!--
The FreeBSD Dutch Documentation Project
- $FreeBSD: doc/nl_NL.ISO8859-1/books/handbook/mirrors/chapter.sgml,v 1.35 2010/03/24 21:22:17 rene Exp $
+ $FreeBSD: doc/nl_NL.ISO8859-1/books/handbook/mirrors/chapter.sgml,v 1.36 2010/03/30 12:19:50 rene Exp $
Vertaald door: Siebrand Mazeland / Rene Ladan
%SOURCE% en_US.ISO8859-1/books/handbook/mirrors/chapter.sgml
- %SRCID% 1.478
+ %SRCID% 1.479
-->
<appendix id="mirrors">
@@ -945,9 +945,7 @@
de applicatie standaard meegeleverd, oudere versies hebben dit
echter niet, maar deze kunnen simpel de
<filename role="package">net/csup</filename> port installeren
- of een vooraf gecompileerd pakket. Als je echter complete
- repositories wilt schaduwen, is <application>CVSup</application>
- nog steeds noodzakelijk. Als ervoor gekozen is om
+ of een vooraf gecompileerd pakket. Als ervoor gekozen is om
<application>csup</application> te gebruiken, sla dan de
installatie stappen voor <application>CVSup</application> over
en vervang de referenties naar <application>CVSup</application>
==== //depot/projects/docproj_nl/share/pgpkeys/pgpkeys-developers.sgml#33 (text+ko) ====
@@ -1,7 +1,7 @@
<!--
The FreeBSD Documentation Project
- $FreeBSD: doc/share/pgpkeys/pgpkeys-developers.sgml,v 1.118 2010/02/06 18:08:09 bschmidt Exp $
+ $FreeBSD: doc/share/pgpkeys/pgpkeys-developers.sgml,v 1.119 2010/04/05 17:09:49 jacula Exp $
-->
<sect2 id="pgpkey-ariff">
@@ -1056,6 +1056,11 @@
&pgpkey.gerald;
</sect2>
+ <sect2 id="pgpkey-jacula">
+ <title>&a.jacula;</title>
+ &pgpkey.jacula;
+ </sect2>
+
<sect2 id="pgpkey-jdp">
<title>&a.jdp;</title>
&pgpkey.jdp;
==== //depot/projects/docproj_nl/share/pgpkeys/pgpkeys.ent#30 (text+ko) ====
@@ -1,5 +1,5 @@
-<!-- $FreeBSD: doc/share/pgpkeys/pgpkeys.ent,v 1.210 2010/02/06 18:08:09 bschmidt Exp $ -->
+<!-- $FreeBSD: doc/share/pgpkeys/pgpkeys.ent,v 1.211 2010/04/05 17:09:49 jacula Exp $ -->
<!-- PGP keyblocks -->
<!ENTITY pgpkey.aaron SYSTEM "aaron.key">
<!ENTITY pgpkey.ache SYSTEM "ache.key">
@@ -124,6 +124,7 @@
<!ENTITY pgpkey.imp SYSTEM "imp.key">
<!ENTITY pgpkey.itetcu SYSTEM "itetcu.key">
<!ENTITY pgpkey.ivoras SYSTEM "ivoras.key">
+<!ENTITY pgpkey.jacula SYSTEM "jacula.key">
<!ENTITY pgpkey.jadawin SYSTEM "jadawin.key">
<!ENTITY pgpkey.jamie SYSTEM "jamie.key">
<!ENTITY pgpkey.jcamou SYSTEM "jcamou.key">
==== //depot/projects/docproj_nl/www/en/developers.sgml#32 (text+ko) ====
@@ -6,7 +6,7 @@
us to update author names, or the representation of those names (such
as adding email addresses), by just editing a single file.
-$FreeBSD: www/en/developers.sgml,v 1.242 2010/03/04 02:09:47 neel Exp $
+$FreeBSD: www/en/developers.sgml,v 1.244 2010/04/05 17:13:23 jacula Exp $
-->
@@ -134,6 +134,7 @@
<!ENTITY a.dd "Dima Dorfman">
<!ENTITY a.dds "Diomidis D. Spinellis">
<!ENTITY a.dec "David E. Cross">
+<!ENTITY a.decke "Bernhard Fröhlich">
<!ENTITY a.deischen "Daniel Eischen">
<!ENTITY a.delphij "Xin Li">
<!ENTITY a.demon "Dmitry Sivachenko">
@@ -233,6 +234,7 @@
<!ENTITY a.itojun "Jun-ichiro Itoh">
<!ENTITY a.ivoras "Ivan Voras">
<!ENTITY a.iwasaki "Mitsuru IWASAKI">
+<!ENTITY a.jacula "Giuseppe Pilichi">
<!ENTITY a.jadawin "Philippe Audeoud">
<!ENTITY a.jake "Jake Burkholder">
<!ENTITY a.jamie "Jamie Gritton">
==== //depot/projects/docproj_nl/www/en/donations/wantlist.sgml#17 (text+ko) ====
@@ -1,6 +1,6 @@
<!DOCTYPE HTML PUBLIC "-//FreeBSD//DTD HTML 4.01 Transitional-Based Extension//EN" [
<!ENTITY base CDATA "..">
-<!ENTITY date "$FreeBSD: www/en/donations/wantlist.sgml,v 1.482 2010/02/27 23:30:47 linimon Exp $">
+<!ENTITY date "$FreeBSD: www/en/donations/wantlist.sgml,v 1.483 2010/04/01 09:46:38 gahr Exp $">
<!ENTITY title "FreeBSD Developers Want List">
<!ENTITY email 'donations'>
<!ENTITY % navinclude.about "INCLUDE">
@@ -411,15 +411,6 @@
</tr>
<tr>
- <td>thomas</td>
- <td>France</td>
- <td>UDMA controller, ATAPI floppy drive, ATAPI tape drive</td>
- <td>Ensure these ATAPI devices work with ATAPI/CAM with the
- same level of functionality currently available with the
- afd/ast drivers.</td>
- </tr>
-
- <tr>
<td>tabthorpe</td>
<td>Canada</td>
<td>AMD64 machine, minimum 256 M memory, any size hard drive.</td>
==== //depot/projects/docproj_nl/www/en/multimedia/multimedia-input.xml#7 (text+ko) ====
@@ -4678,27 +4678,13 @@
<a href="http://Constantine.SU/">http://Constantine.SU/</a>
]]></desc>
<overview>http://2008.eurobsdcon.org/talks.html</overview>
- <tags>eurobsdcon,eurobsdcon2008,openbsd,hardware sensors,constantine murenin</tags>
+ <tags>eurobsdcon,eurobsdcon2008,presentation,openbsd,hardware sensors,constantine murenin</tags>
<files>
<file>
- <url>http://audiovideocours.u-strasbg.fr/avc/courseaccess?id=2825&type=ogg</url>
- <desc>OGG</desc>
- <size>1 byte</size>
- <length>47 minutes</length>
- <tags>ogg</tags>
- </file>
- <file>
- <url>http://audiovideocours.u-strasbg.fr/avc/courseaccess?id=2825&type=mp3</url>
- <desc>MP3</desc>
- <size>1 byte</size>
- <length>47 minutes</length>
- <tags>mp3</tags>
- </file>
- <file>
- <url>http://audiovideocours.u-strasbg.fr/avc/courseaccess?id=2825&type=pdf</url>
+ <url>http://www.openbsd.org/papers/eurobsdcon2008-sensors.pdf</url>
<desc>PDF</desc>
- <size>1 byte</size>
- <length>n pages</length>
+ <size>539395 bytes</size>
+ <length>38 pages</length>
<tags>pdf</tags>
</file>
</files>
@@ -6055,7 +6041,7 @@
<url>abc2009-P2A-paper.pdf</url>
<size>401 Kb</size>
<length>6 pages</length>
- <desc>OpenBGPD - Bringing full views to OpenBSD since by 2004 Claudio Jeker</desc>
+ <desc>OpenBGPD - Bringing full views to OpenBSD since 2004 by Claudio Jeker</desc>
<tags>pdf,paper,openbgpd,openbsd,claudio jeker</tags>
</file>
<file>
@@ -6077,7 +6063,7 @@
<size>245 Kb</size>
<length>14 pages</length>
<desc>OpenBSD Hardware Sensors Framework by Constantine A. Murenin</desc>
- <tags>pdf,paper,openbsd,hardware sensors framework,constantine murenin</tags>
+ <tags>pdf,paper,openbsd,hardware sensors,constantine murenin</tags>
</file>
<file>
<url>abc2009-P4A-paper.pdf</url>
@@ -9937,7 +9923,7 @@
</p><p>
</p>
]]></desc>
- <tags>bsdcan,bsdcan2009,presentation,bsd,hardware monitors,canstantine murenin</tags>
+ <tags>bsdcan,bsdcan2009,presentation,openbsd,hardware sensors,constantine murenin</tags>
<files>
<file>
<url>http://www.bsdcan.org/2009/schedule/attachments/95_BSDCan2009.cnst-fanctl.slides.pdf</url>
==== //depot/projects/docproj_nl/www/en/projects/ideas/ideas.xml#10 (text+ko) ====
@@ -15,7 +15,7 @@
<ideas>
<cvs:keywords xmlns:cvs="http://www.FreeBSD.org/XML/CVS" version="1.0">
<cvs:keyword name="freebsd">
- $FreeBSD: www/en/projects/ideas/ideas.xml,v 1.160 2010/03/28 16:25:50 rwatson Exp $
+ $FreeBSD: www/en/projects/ideas/ideas.xml,v 1.162 2010/04/02 09:28:32 pav Exp $
</cvs:keyword>
</cvs:keywords>
@@ -1242,31 +1242,6 @@
<category>
<title>Ports</title>
- <idea id="ports-db" class="soc">
- <title>Add .db support to pkg_tools</title>
-
- <desc>
-<p>pkg_create(1) and friends use flat databases (aka ordinary
- files and directories in /var/db/pkg) to maintain their data. This
- makes it cumbersome and/or impossible to do efficient lookups of data
- on installed packages and makes certain operations very slow.
- portupgrade has the right idea of hashing this into a berkeley db
- file, but it uses tools that are not in the base system (ruby).</p>
-<p>A self-contained project would be to add similar (preferably
- compatible) code into pkg_tools directly, possibly also extending
- the data that is stored and allowing for more flexible querying with
- tools like pkg_info (e.g. replicating the pkg_which utility of
- portupgrade). Adding mutual exclusion to protect concurrent
- pkg_add/delete operations from corrupting database state is also
- important.</p>
-<p><strong>Requirements</strong>:</p>
-<ul>
- <li>Knowledge of C.</li>
- <li>Basic understanding of the use of berkeley db.</li>
-</ul>
- </desc>
- </idea>
-
<idea id="ports-pkgtools">
<title>Package tools improvements</title>
@@ -1283,38 +1258,6 @@
</desc>
</idea>
- <idea class="soc" id="ports-parallel">
- <title>Parallelization in the Ports Collection</title>
-
- <desc>
- <p>Add locking of write access to PKG_DBDIR (/var/db/pkg), to allow
- several port builds run in parallel without clobbering the package
- data. Should be done both in makefiles and in C tools like
- pkg_install and pkg_delete. A simple flock(2) approach over the
- whole database comes to mind.</p>
-
- <p>The next step is the parallelization of dependency building. Have
- the port build it's dependencies in parallel, automatically
- depending on number of CPUs in the machine, or manually specified
- by user (make -j3 install clean). Some kind of split screen should
- be devised, so user can easily watch the process and interact with
- it (make config screens, for example). Attention must be paid to
- prevent deadlocks.</p>
-
- <p>Allow for situation when two ports want to build and install
- common dependency. One of the ports have to wait on the other to
- install it before proceeding.</p>
-
- <p><strong>Requirements</strong>:</p>
-
- <ul>
- <li>Strong knowledge of make and shell code.</li>
- <li>Strong knowledge of C code.</li>
- <li>Good understanding of the inner design of the Ports Collection.</li>
- </ul>
- </desc>
- </idea>
-
<idea id="fat-pkgs" class="soc">
<title>Complete (a.k.a. Fat) packages</title>
<desc>
@@ -1654,6 +1597,32 @@
</desc>
</idea>
+ <idea id="privmodel" class="soc">
+ <title>New kernel privilege model</title>
+
+ <desc>
+ <p><strong>Technical contact</strong>: <a
+ href="mailto:rwatson at FreeBSD.org">Robert Watson</a></p>
+
+ <p>FreeBSD uses a largely standard UNIX privilege model, granting
+ special OS rights to processes with an effective uid of 0.
+ Exceptional behavior lies in securelevel (restricting root based
+ on a global or per-jail level), Jail (limiting certain rights to
+ ensure safe containment for a jailed root user), and the ability
+ for the MAC Framework to augment privilege decisions. However,
+ as of FreeBSD 7.0, privilege decisions internal to the kernel
+ have been made with respect to a large set of named privileges
+ (priv.h). This project idea is to create a new privilege model,
+ similar perhaps to POSIX.1e or the Solaris privilege model,
+ allowing masks of privileges to be associated with process
+ credentials and managed with system calls. Of particular
+ interest is supporting the assignment of privileges to users or
+ roles -- such as the right to bind low port numbers, use DTrace,
+ etc.
+ </p>
+ </desc>
+ </idea>
+
</category>
<category>
==== //depot/projects/docproj_nl/www/en/releases/7.3R/errata.html#3 (text+ko) ====
@@ -19,7 +19,7 @@
<p class="COPYRIGHT">Copyright © 2010 The FreeBSD Documentation Project</p>
<p class="PUBDATE">$FreeBSD: stable/7/release/doc/en_US.ISO8859-1/errata/article.sgml
-205521 2010-03-23 18:36:45Z hrs $<br />
+206131 2010-04-03 10:07:10Z hrs $<br />
</p>
<div class="LEGALNOTICE"><a id="TRADEMARKS" name="TRADEMARKS"></a>
@@ -102,10 +102,48 @@
<h2 class="SECT1"><a id="LATE-NEWS" name="LATE-NEWS">4 Late-Breaking News and
Corrections</a></h2>
-<p>[20100323] The FreeBSD 7.3-RELEASE Release Notes incorrectly mentioned that the
-hwpmc(4) driver has been added though this driver has already been added in 7.0-RELEASE.
-The changes in 7.3-RELEASE are that pmcannotate(8) utility and support for Intel Core 2
>>> TRUNCATED FOR MAIL (1000 lines) <<<
More information about the p4-projects
mailing list