PERFORCE change 163190 for review
Andrew Thompson
thompsa at FreeBSD.org
Sun May 31 18:43:06 UTC 2009
http://perforce.freebsd.org/chv.cgi?CH=163190
Change 163190 by thompsa at thompsa_burger on 2009/05/31 18:42:57
Rename usb pipes to endpoints as it better represents what they are.
Affected files ...
.. //depot/projects/usb_buf/src/sys/dev/usb/controller/at91dci.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/controller/atmegadci.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/controller/avr32dci.c#5 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/controller/ehci.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/controller/musb_otg.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/controller/ohci.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/controller/uhci.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/controller/uss820dci.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/serial/ugensa.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/serial/umct.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/storage/ustorage_fs.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/usb.h#3 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/usb_compat_linux.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/usb_compat_linux.h#5 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/usb_controller.h#5 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/usb_core.h#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/usb_debug.c#5 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/usb_debug.h#4 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/usb_dev.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/usb_device.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/usb_device.h#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/usb_generic.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/usb_handle_request.c#4 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/usb_hub.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/usb_request.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/usb_transfer.c#6 edit
.. //depot/projects/usb_buf/src/sys/dev/usb/usb_transfer.h#5 edit
Differences ...
==== //depot/projects/usb_buf/src/sys/dev/usb/controller/at91dci.c#6 (text+ko) ====
@@ -687,7 +687,7 @@
done:
sc = AT9100_DCI_BUS2SC(xfer->xroot->bus);
- temp = (xfer->endpoint & UE_ADDR);
+ temp = (xfer->endpointno & UE_ADDR);
/* update FIFO bank flag and multi buffer */
if (td->fifo_bank) {
@@ -864,7 +864,7 @@
uint8_t need_sync;
DPRINTFN(9, "addr=%d endpt=%d sumlen=%d speed=%d\n",
- xfer->address, UE_GET_ADDR(xfer->endpoint),
+ xfer->address, UE_GET_ADDR(xfer->endpointno),
xfer->sumlen, usb2_get_speed(xfer->xroot->udev));
temp.max_frame_size = xfer->max_frame_size;
@@ -882,7 +882,7 @@
temp.did_stall = !xfer->flags_int.control_stall;
sc = AT9100_DCI_BUS2SC(xfer->xroot->bus);
- ep_no = (xfer->endpoint & UE_ADDR);
+ ep_no = (xfer->endpointno & UE_ADDR);
/* check if we should prepend a setup message */
@@ -908,7 +908,7 @@
}
if (x != xfer->nframes) {
- if (xfer->endpoint & UE_DIR_IN) {
+ if (xfer->endpointno & UE_DIR_IN) {
temp.func = &at91dci_data_tx;
need_sync = 1;
} else {
@@ -984,7 +984,7 @@
* Send a DATA1 message and invert the current
* endpoint direction.
*/
- if (xfer->endpoint & UE_DIR_IN) {
+ if (xfer->endpointno & UE_DIR_IN) {
temp.func = &at91dci_data_rx;
need_sync = 0;
} else {
@@ -1034,7 +1034,7 @@
if (at91dci_xfer_do_fifo(xfer)) {
struct at91dci_softc *sc = AT9100_DCI_BUS2SC(xfer->xroot->bus);
- uint8_t ep_no = xfer->endpoint & UE_ADDR;
+ uint8_t ep_no = xfer->endpointno & UE_ADDR;
/*
* Only enable the endpoint interrupt when we are actually
@@ -1139,8 +1139,8 @@
{
usb_error_t err = 0;
- DPRINTFN(13, "xfer=%p pipe=%p transfer done\n",
- xfer, xfer->pipe);
+ DPRINTFN(13, "xfer=%p endpoint=%p transfer done\n",
+ xfer, xfer->endpoint);
/* reset scanner */
@@ -1191,11 +1191,11 @@
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
- DPRINTFN(2, "xfer=%p, pipe=%p, error=%d\n",
- xfer, xfer->pipe, error);
+ DPRINTFN(2, "xfer=%p, endpoint=%p, error=%d\n",
+ xfer, xfer->endpoint, error);
if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
- ep_no = (xfer->endpoint & UE_ADDR);
+ ep_no = (xfer->endpointno & UE_ADDR);
/* disable endpoint interrupt */
AT91_UDP_WRITE_4(sc, AT91_UDP_IDR, AT91_UDP_INT_EP(ep_no));
@@ -1208,7 +1208,7 @@
static void
at91dci_set_stall(struct usb_device *udev, struct usb_xfer *xfer,
- struct usb_pipe *pipe)
+ struct usb_endpoint *ep)
{
struct at91dci_softc *sc;
uint32_t csr_val;
@@ -1216,7 +1216,7 @@
USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
- DPRINTFN(5, "pipe=%p\n", pipe);
+ DPRINTFN(5, "endpoint=%p\n", ep);
if (xfer) {
/* cancel any ongoing transfers */
@@ -1224,7 +1224,7 @@
}
/* set FORCESTALL */
sc = AT9100_DCI_BUS2SC(udev->bus);
- csr_reg = (pipe->edesc->bEndpointAddress & UE_ADDR);
+ csr_reg = (ep->edesc->bEndpointAddress & UE_ADDR);
csr_reg = AT91_UDP_CSR(csr_reg);
csr_val = AT91_UDP_READ_4(sc, csr_reg);
AT91_CSR_ACK(csr_val, AT91_UDP_CSR_FORCESTALL);
@@ -1328,12 +1328,12 @@
}
static void
-at91dci_clear_stall(struct usb_device *udev, struct usb_pipe *pipe)
+at91dci_clear_stall(struct usb_device *udev, struct usb_endpoint *ep)
{
struct at91dci_softc *sc;
struct usb_endpoint_descriptor *ed;
- DPRINTFN(5, "pipe=%p\n", pipe);
+ DPRINTFN(5, "endpoint=%p\n", ep);
USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
@@ -1346,7 +1346,7 @@
sc = AT9100_DCI_BUS2SC(udev->bus);
/* get endpoint descriptor */
- ed = pipe->edesc;
+ ed = ep->edesc;
/* reset endpoint */
at91dci_clear_stall_sub(sc,
@@ -1598,7 +1598,7 @@
uint32_t nframes;
DPRINTFN(6, "xfer=%p next=%d nframes=%d\n",
- xfer, xfer->pipe->isoc_next, xfer->nframes);
+ xfer, xfer->endpoint->isoc_next, xfer->nframes);
/* get the current frame index */
@@ -1608,25 +1608,25 @@
* check if the frame index is within the window where the frames
* will be inserted
*/
- temp = (nframes - xfer->pipe->isoc_next) & AT91_UDP_FRM_MASK;
+ temp = (nframes - xfer->endpoint->isoc_next) & AT91_UDP_FRM_MASK;
- if ((xfer->pipe->is_synced == 0) ||
+ if ((xfer->endpoint->is_synced == 0) ||
(temp < xfer->nframes)) {
/*
- * If there is data underflow or the pipe queue is
+ * If there is data underflow or the endpoint queue is
* empty we schedule the transfer a few frames ahead
* of the current frame position. Else two isochronous
* transfers might overlap.
*/
- xfer->pipe->isoc_next = (nframes + 3) & AT91_UDP_FRM_MASK;
- xfer->pipe->is_synced = 1;
- DPRINTFN(3, "start next=%d\n", xfer->pipe->isoc_next);
+ xfer->endpoint->isoc_next = (nframes + 3) & AT91_UDP_FRM_MASK;
+ xfer->endpoint->is_synced = 1;
+ DPRINTFN(3, "start next=%d\n", xfer->endpoint->isoc_next);
}
/*
* compute how many milliseconds the insertion is ahead of the
* current frame position:
*/
- temp = (xfer->pipe->isoc_next - nframes) & AT91_UDP_FRM_MASK;
+ temp = (xfer->endpoint->isoc_next - nframes) & AT91_UDP_FRM_MASK;
/*
* pre-compute when the isochronous transfer will be finished:
@@ -1636,7 +1636,7 @@
xfer->nframes;
/* compute frame number for next insertion */
- xfer->pipe->isoc_next += xfer->nframes;
+ xfer->endpoint->isoc_next += xfer->nframes;
/* setup TDs */
at91dci_setup_standard_chain(xfer);
@@ -2208,7 +2208,7 @@
*/
if (ntd) {
- ep_no = xfer->endpoint & UE_ADDR;
+ ep_no = xfer->endpointno & UE_ADDR;
at91dci_get_hw_ep_profile(parm->udev, &pf, ep_no);
if (pf == NULL) {
@@ -2259,12 +2259,12 @@
static void
at91dci_pipe_init(struct usb_device *udev, struct usb_endpoint_descriptor *edesc,
- struct usb_pipe *pipe)
+ struct usb_endpoint *ep)
{
struct at91dci_softc *sc = AT9100_DCI_BUS2SC(udev->bus);
- DPRINTFN(2, "pipe=%p, addr=%d, endpt=%d, mode=%d (%d)\n",
- pipe, udev->address,
+ DPRINTFN(2, "endpoint=%p, addr=%d, endpt=%d, mode=%d (%d)\n",
+ ep, udev->address,
edesc->bEndpointAddress, udev->flags.usb_mode,
sc->sc_rt_addr);
@@ -2280,16 +2280,16 @@
}
switch (edesc->bmAttributes & UE_XFERTYPE) {
case UE_CONTROL:
- pipe->methods = &at91dci_device_ctrl_methods;
+ ep->methods = &at91dci_device_ctrl_methods;
break;
case UE_INTERRUPT:
- pipe->methods = &at91dci_device_intr_methods;
+ ep->methods = &at91dci_device_intr_methods;
break;
case UE_ISOCHRONOUS:
- pipe->methods = &at91dci_device_isoc_fs_methods;
+ ep->methods = &at91dci_device_isoc_fs_methods;
break;
case UE_BULK:
- pipe->methods = &at91dci_device_bulk_methods;
+ ep->methods = &at91dci_device_bulk_methods;
break;
default:
/* do nothing */
==== //depot/projects/usb_buf/src/sys/dev/usb/controller/atmegadci.c#6 (text+ko) ====
@@ -767,7 +767,7 @@
uint8_t need_sync;
DPRINTFN(9, "addr=%d endpt=%d sumlen=%d speed=%d\n",
- xfer->address, UE_GET_ADDR(xfer->endpoint),
+ xfer->address, UE_GET_ADDR(xfer->endpointno),
xfer->sumlen, usb2_get_speed(xfer->xroot->udev));
temp.max_frame_size = xfer->max_frame_size;
@@ -785,7 +785,7 @@
temp.did_stall = !xfer->flags_int.control_stall;
sc = ATMEGA_BUS2SC(xfer->xroot->bus);
- ep_no = (xfer->endpoint & UE_ADDR);
+ ep_no = (xfer->endpointno & UE_ADDR);
/* check if we should prepend a setup message */
@@ -811,7 +811,7 @@
}
if (x != xfer->nframes) {
- if (xfer->endpoint & UE_DIR_IN) {
+ if (xfer->endpointno & UE_DIR_IN) {
temp.func = &atmegadci_data_tx;
need_sync = 1;
} else {
@@ -886,7 +886,7 @@
* Send a DATA1 message and invert the current
* endpoint direction.
*/
- if (xfer->endpoint & UE_DIR_IN) {
+ if (xfer->endpointno & UE_DIR_IN) {
temp.func = &atmegadci_data_rx;
need_sync = 0;
} else {
@@ -1022,8 +1022,8 @@
{
usb_error_t err = 0;
- DPRINTFN(13, "xfer=%p pipe=%p transfer done\n",
- xfer, xfer->pipe);
+ DPRINTFN(13, "xfer=%p endpoint=%p transfer done\n",
+ xfer, xfer->endpoint);
/* reset scanner */
@@ -1074,11 +1074,11 @@
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
- DPRINTFN(9, "xfer=%p, pipe=%p, error=%d\n",
- xfer, xfer->pipe, error);
+ DPRINTFN(9, "xfer=%p, endpoint=%p, error=%d\n",
+ xfer, xfer->endpoint, error);
if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
- ep_no = (xfer->endpoint & UE_ADDR);
+ ep_no = (xfer->endpointno & UE_ADDR);
/* select endpoint number */
ATMEGA_WRITE_1(sc, ATMEGA_UENUM, ep_no);
@@ -1094,14 +1094,14 @@
static void
atmegadci_set_stall(struct usb_device *udev, struct usb_xfer *xfer,
- struct usb_pipe *pipe)
+ struct usb_endpoint *ep)
{
struct atmegadci_softc *sc;
uint8_t ep_no;
USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
- DPRINTFN(5, "pipe=%p\n", pipe);
+ DPRINTFN(5, "endpoint=%p\n", ep);
if (xfer) {
/* cancel any ongoing transfers */
@@ -1109,7 +1109,7 @@
}
sc = ATMEGA_BUS2SC(udev->bus);
/* get endpoint number */
- ep_no = (pipe->edesc->bEndpointAddress & UE_ADDR);
+ ep_no = (ep->edesc->bEndpointAddress & UE_ADDR);
/* select endpoint number */
ATMEGA_WRITE_1(sc, ATMEGA_UENUM, ep_no);
/* set stall */
@@ -1178,12 +1178,12 @@
}
static void
-atmegadci_clear_stall(struct usb_device *udev, struct usb_pipe *pipe)
+atmegadci_clear_stall(struct usb_device *udev, struct usb_endpoint *ep)
{
struct atmegadci_softc *sc;
struct usb_endpoint_descriptor *ed;
- DPRINTFN(5, "pipe=%p\n", pipe);
+ DPRINTFN(5, "endpoint=%p\n", ep);
USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
@@ -1196,7 +1196,7 @@
sc = ATMEGA_BUS2SC(udev->bus);
/* get endpoint descriptor */
- ed = pipe->edesc;
+ ed = ep->edesc;
/* reset endpoint */
atmegadci_clear_stall_sub(sc,
@@ -1415,7 +1415,7 @@
uint32_t nframes;
DPRINTFN(6, "xfer=%p next=%d nframes=%d\n",
- xfer, xfer->pipe->isoc_next, xfer->nframes);
+ xfer, xfer->endpoint->isoc_next, xfer->nframes);
/* get the current frame index */
@@ -1429,9 +1429,9 @@
* check if the frame index is within the window where the frames
* will be inserted
*/
- temp = (nframes - xfer->pipe->isoc_next) & ATMEGA_FRAME_MASK;
+ temp = (nframes - xfer->endpoint->isoc_next) & ATMEGA_FRAME_MASK;
- if ((xfer->pipe->is_synced == 0) ||
+ if ((xfer->endpoint->is_synced == 0) ||
(temp < xfer->nframes)) {
/*
* If there is data underflow or the pipe queue is
@@ -1439,15 +1439,15 @@
* of the current frame position. Else two isochronous
* transfers might overlap.
*/
- xfer->pipe->isoc_next = (nframes + 3) & ATMEGA_FRAME_MASK;
- xfer->pipe->is_synced = 1;
- DPRINTFN(3, "start next=%d\n", xfer->pipe->isoc_next);
+ xfer->endpoint->isoc_next = (nframes + 3) & ATMEGA_FRAME_MASK;
+ xfer->endpoint->is_synced = 1;
+ DPRINTFN(3, "start next=%d\n", xfer->endpoint->isoc_next);
}
/*
* compute how many milliseconds the insertion is ahead of the
* current frame position:
*/
- temp = (xfer->pipe->isoc_next - nframes) & ATMEGA_FRAME_MASK;
+ temp = (xfer->endpoint->isoc_next - nframes) & ATMEGA_FRAME_MASK;
/*
* pre-compute when the isochronous transfer will be finished:
@@ -1457,7 +1457,7 @@
xfer->nframes;
/* compute frame number for next insertion */
- xfer->pipe->isoc_next += xfer->nframes;
+ xfer->endpoint->isoc_next += xfer->nframes;
/* setup TDs */
atmegadci_setup_standard_chain(xfer);
@@ -2022,7 +2022,7 @@
/*
* compute maximum number of TDs
*/
- if ((xfer->pipe->edesc->bmAttributes & UE_XFERTYPE) == UE_CONTROL) {
+ if ((xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) == UE_CONTROL) {
ntd = xfer->nframes + 1 /* STATUS */ + 1 /* SYNC 1 */
+ 1 /* SYNC 2 */ ;
@@ -2045,7 +2045,7 @@
/*
* get profile stuff
*/
- ep_no = xfer->endpoint & UE_ADDR;
+ ep_no = xfer->endpointno & UE_ADDR;
atmegadci_get_hw_ep_profile(parm->udev, &pf, ep_no);
if (pf == NULL) {
@@ -2089,12 +2089,12 @@
static void
atmegadci_pipe_init(struct usb_device *udev, struct usb_endpoint_descriptor *edesc,
- struct usb_pipe *pipe)
+ struct usb_endpoint *ep)
{
struct atmegadci_softc *sc = ATMEGA_BUS2SC(udev->bus);
- DPRINTFN(2, "pipe=%p, addr=%d, endpt=%d, mode=%d (%d,%d)\n",
- pipe, udev->address,
+ DPRINTFN(2, "endpoint=%p, addr=%d, endpt=%d, mode=%d (%d,%d)\n",
+ ep, udev->address,
edesc->bEndpointAddress, udev->flags.usb_mode,
sc->sc_rt_addr, udev->device_index);
@@ -2109,9 +2109,9 @@
return;
}
if ((edesc->bmAttributes & UE_XFERTYPE) == UE_ISOCHRONOUS)
- pipe->methods = &atmegadci_device_isoc_fs_methods;
+ ep->methods = &atmegadci_device_isoc_fs_methods;
else
- pipe->methods = &atmegadci_device_non_isoc_methods;
+ ep->methods = &atmegadci_device_non_isoc_methods;
}
}
==== //depot/projects/usb_buf/src/sys/dev/usb/controller/avr32dci.c#5 (text+ko) ====
@@ -1062,7 +1062,7 @@
static void
avr32dci_set_stall(struct usb_device *udev, struct usb_xfer *xfer,
- struct usb_pipe *pipe)
+ struct usb_endpoint *ep)
{
struct avr32dci_softc *sc;
uint8_t ep_no;
@@ -1148,7 +1148,7 @@
}
static void
-avr32dci_clear_stall(struct usb_device *udev, struct usb_pipe *pipe)
+avr32dci_clear_stall(struct usb_device *udev, struct usb_endpoint *ep)
{
struct avr32dci_softc *sc;
struct usb_endpoint_descriptor *ed;
@@ -2026,7 +2026,7 @@
static void
avr32dci_pipe_init(struct usb_device *udev, struct usb_endpoint_descriptor *edesc,
- struct usb_pipe *pipe)
+ struct usb_endpoint *ep)
{
struct avr32dci_softc *sc = AVR32_BUS2SC(udev->bus);
==== //depot/projects/usb_buf/src/sys/dev/usb/controller/ehci.c#6 (text+ko) ====
@@ -1190,14 +1190,14 @@
/* update data toggle */
- xfer->pipe->toggle_next =
+ xfer->endpoint->toggle_next =
(status & EHCI_QTD_TOGGLE_MASK) ? 1 : 0;
#if USB_DEBUG
if (status & EHCI_QTD_STATERRS) {
DPRINTFN(11, "error, addr=%d, endpt=0x%02x, frame=0x%02x"
"status=%s%s%s%s%s%s%s%s\n",
- xfer->address, xfer->endpoint, xfer->aframes,
+ xfer->address, xfer->endpointno, xfer->aframes,
(status & EHCI_QTD_ACTIVE) ? "[ACTIVE]" : "[NOT_ACTIVE]",
(status & EHCI_QTD_HALTED) ? "[HALTED]" : "",
(status & EHCI_QTD_BUFERR) ? "[BUFERR]" : "",
@@ -1218,8 +1218,8 @@
{
usb_error_t err = 0;
- DPRINTFN(13, "xfer=%p pipe=%p transfer done\n",
- xfer, xfer->pipe);
+ DPRINTFN(13, "xfer=%p endpoint=%p transfer done\n",
+ xfer, xfer->endpoint);
#if USB_DEBUG
if (ehcidebug > 10) {
@@ -1274,7 +1274,7 @@
static uint8_t
ehci_check_transfer(struct usb_xfer *xfer)
{
- struct usb_pipe_methods *methods = xfer->pipe->methods;
+ struct usb_pipe_methods *methods = xfer->endpoint->methods;
ehci_softc_t *sc = EHCI_BUS2SC(xfer->xroot->bus);
uint32_t status;
@@ -1716,7 +1716,7 @@
uint32_t x;
DPRINTFN(9, "addr=%d endpt=%d sumlen=%d speed=%d\n",
- xfer->address, UE_GET_ADDR(xfer->endpoint),
+ xfer->address, UE_GET_ADDR(xfer->endpointno),
xfer->sumlen, usb2_get_speed(xfer->xroot->udev));
temp.average = xfer->max_hc_frame_size;
@@ -1739,7 +1739,7 @@
temp.setup_alt_next = xfer->flags_int.short_frames_ok;
if (xfer->flags_int.control_xfr) {
- if (xfer->pipe->toggle_next) {
+ if (xfer->endpoint->toggle_next) {
/* DATA1 is next */
temp.qtd_status |=
htohc32(temp.sc, EHCI_QTD_SET_TOGGLE(1));
@@ -1827,7 +1827,7 @@
/* set endpoint direction */
temp.qtd_status |=
- (UE_GET_DIR(xfer->endpoint) == UE_DIR_IN) ?
+ (UE_GET_DIR(xfer->endpointno) == UE_DIR_IN) ?
htohc32(temp.sc, EHCI_QTD_ACTIVE |
EHCI_QTD_SET_PID(EHCI_QTD_PID_IN)) :
htohc32(temp.sc, EHCI_QTD_ACTIVE |
@@ -1849,7 +1849,7 @@
temp.qtd_status &= htohc32(temp.sc, EHCI_QTD_SET_CERR(3) |
EHCI_QTD_SET_TOGGLE(1));
temp.qtd_status |=
- (UE_GET_DIR(xfer->endpoint) == UE_DIR_OUT) ?
+ (UE_GET_DIR(xfer->endpointno) == UE_DIR_OUT) ?
htohc32(temp.sc, EHCI_QTD_ACTIVE |
EHCI_QTD_SET_PID(EHCI_QTD_PID_IN) |
EHCI_QTD_SET_TOGGLE(1)) :
@@ -1881,13 +1881,13 @@
#if USB_DEBUG
if (ehcidebug > 8) {
DPRINTF("nexttog=%d; data before transfer:\n",
- xfer->pipe->toggle_next);
+ xfer->endpoint->toggle_next);
ehci_dump_sqtds(temp.sc,
xfer->td_transfer_first);
}
#endif
- methods = xfer->pipe->methods;
+ methods = xfer->endpoint->methods;
qh = xfer->qh_start[xfer->flags_int.curr_dma_set];
@@ -1895,7 +1895,7 @@
qh_endp =
(EHCI_QH_SET_ADDR(xfer->address) |
- EHCI_QH_SET_ENDPT(UE_GET_ADDR(xfer->endpoint)) |
+ EHCI_QH_SET_ENDPT(UE_GET_ADDR(xfer->endpointno)) |
EHCI_QH_SET_MPL(xfer->max_packet_size));
if (usb2_get_speed(xfer->xroot->udev) == USB_SPEED_HIGH) {
@@ -1943,7 +1943,7 @@
qh->qh_endp &= htohc32(temp.sc, ~EHCI_QH_DTC);
- if (xfer->pipe->toggle_next) {
+ if (xfer->endpoint->toggle_next) {
/* DATA1 is next */
qh->qh_qtd.qtd_status |=
htohc32(temp.sc, EHCI_QTD_SET_TOGGLE(1));
@@ -1999,8 +1999,8 @@
ehci_sitd_t *td = xfer->td_transfer_first;
ehci_sitd_t **pp_last = &sc->sc_isoc_fs_p_last[xfer->qh_pos];
- DPRINTFN(13, "xfer=%p pipe=%p transfer done\n",
- xfer, xfer->pipe);
+ DPRINTFN(13, "xfer=%p endpoint=%p transfer done\n",
+ xfer, xfer->endpoint);
while (nframes--) {
if (td == NULL) {
@@ -2053,8 +2053,8 @@
ehci_itd_t *td = xfer->td_transfer_first;
ehci_itd_t **pp_last = &sc->sc_isoc_hs_p_last[xfer->qh_pos];
- DPRINTFN(13, "xfer=%p pipe=%p transfer done\n",
- xfer, xfer->pipe);
+ DPRINTFN(13, "xfer=%p endpoint=%p transfer done\n",
+ xfer, xfer->endpoint);
while (nframes--) {
if (td == NULL) {
@@ -2113,20 +2113,20 @@
static void
ehci_device_done(struct usb_xfer *xfer, usb_error_t error)
{
- struct usb_pipe_methods *methods = xfer->pipe->methods;
+ struct usb_pipe_methods *methods = xfer->endpoint->methods;
ehci_softc_t *sc = EHCI_BUS2SC(xfer->xroot->bus);
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
- DPRINTFN(2, "xfer=%p, pipe=%p, error=%d\n",
- xfer, xfer->pipe, error);
+ DPRINTFN(2, "xfer=%p, endpoint=%p, error=%d\n",
+ xfer, xfer->endpoint, error);
if ((methods == &ehci_device_bulk_methods) ||
(methods == &ehci_device_ctrl_methods)) {
#if USB_DEBUG
if (ehcidebug > 8) {
DPRINTF("nexttog=%d; data after transfer:\n",
- xfer->pipe->toggle_next);
+ xfer->endpoint->toggle_next);
ehci_dump_sqtds(sc,
xfer->td_transfer_first);
}
@@ -2358,11 +2358,11 @@
sitd_portaddr =
EHCI_SITD_SET_ADDR(xfer->address) |
- EHCI_SITD_SET_ENDPT(UE_GET_ADDR(xfer->endpoint)) |
+ EHCI_SITD_SET_ENDPT(UE_GET_ADDR(xfer->endpointno)) |
EHCI_SITD_SET_HUBA(xfer->xroot->udev->hs_hub_addr) |
EHCI_SITD_SET_PORT(xfer->xroot->udev->hs_port_no);
- if (UE_GET_DIR(xfer->endpoint) == UE_DIR_IN) {
+ if (UE_GET_DIR(xfer->endpointno) == UE_DIR_IN) {
sitd_portaddr |= EHCI_SITD_SET_DIR_IN;
}
sitd_portaddr = htohc32(sc, sitd_portaddr);
@@ -2422,7 +2422,7 @@
#endif
DPRINTFN(6, "xfer=%p next=%d nframes=%d\n",
- xfer, xfer->pipe->isoc_next, xfer->nframes);
+ xfer, xfer->endpoint->isoc_next, xfer->nframes);
/* get the current frame index */
@@ -2432,10 +2432,10 @@
* check if the frame index is within the window where the frames
* will be inserted
*/
- buf_offset = (nframes - xfer->pipe->isoc_next) &
+ buf_offset = (nframes - xfer->endpoint->isoc_next) &
(EHCI_VIRTUAL_FRAMELIST_COUNT - 1);
- if ((xfer->pipe->is_synced == 0) ||
+ if ((xfer->endpoint->is_synced == 0) ||
(buf_offset < xfer->nframes)) {
/*
* If there is data underflow or the pipe queue is empty we
@@ -2443,16 +2443,16 @@
* frame position. Else two isochronous transfers might
* overlap.
*/
- xfer->pipe->isoc_next = (nframes + 3) &
+ xfer->endpoint->isoc_next = (nframes + 3) &
(EHCI_VIRTUAL_FRAMELIST_COUNT - 1);
- xfer->pipe->is_synced = 1;
- DPRINTFN(3, "start next=%d\n", xfer->pipe->isoc_next);
+ xfer->endpoint->is_synced = 1;
+ DPRINTFN(3, "start next=%d\n", xfer->endpoint->isoc_next);
}
/*
* compute how many milliseconds the insertion is ahead of the
* current frame position:
*/
- buf_offset = (xfer->pipe->isoc_next - nframes) &
+ buf_offset = (xfer->endpoint->isoc_next - nframes) &
(EHCI_VIRTUAL_FRAMELIST_COUNT - 1);
/*
@@ -2478,11 +2478,11 @@
td = xfer->td_start[xfer->flags_int.curr_dma_set];
xfer->td_transfer_first = td;
- pp_last = &sc->sc_isoc_fs_p_last[xfer->pipe->isoc_next];
+ pp_last = &sc->sc_isoc_fs_p_last[xfer->endpoint->isoc_next];
/* store starting position */
- xfer->qh_pos = xfer->pipe->isoc_next;
+ xfer->qh_pos = xfer->endpoint->isoc_next;
fss = fss_start + (xfer->qh_pos % USB_ISOC_TIME_MAX);
@@ -2543,7 +2543,7 @@
temp = 0;
}
- if (UE_GET_DIR(xfer->endpoint) == UE_DIR_OUT) {
+ if (UE_GET_DIR(xfer->endpointno) == UE_DIR_OUT) {
tlen = *plen;
if (tlen <= 188) {
temp |= 1; /* T-count = 1, TP = ALL */
@@ -2609,7 +2609,7 @@
xfer->td_transfer_last = td_last;
/* update isoc_next */
- xfer->pipe->isoc_next = (pp_last - &sc->sc_isoc_fs_p_last[0]) &
+ xfer->endpoint->isoc_next = (pp_last - &sc->sc_isoc_fs_p_last[0]) &
(EHCI_VIRTUAL_FRAMELIST_COUNT - 1);
}
@@ -2658,13 +2658,13 @@
/* set endpoint and address */
td->itd_bp[0] = htohc32(sc,
EHCI_ITD_SET_ADDR(xfer->address) |
- EHCI_ITD_SET_ENDPT(UE_GET_ADDR(xfer->endpoint)));
+ EHCI_ITD_SET_ENDPT(UE_GET_ADDR(xfer->endpointno)));
temp =
EHCI_ITD_SET_MPL(xfer->max_packet_size & 0x7FF);
/* set direction */
- if (UE_GET_DIR(xfer->endpoint) == UE_DIR_IN) {
+ if (UE_GET_DIR(xfer->endpointno) == UE_DIR_IN) {
temp |= EHCI_ITD_SET_DIR_IN;
}
/* set maximum packet size */
@@ -2708,7 +2708,7 @@
#endif
DPRINTFN(6, "xfer=%p next=%d nframes=%d\n",
- xfer, xfer->pipe->isoc_next, xfer->nframes);
+ xfer, xfer->endpoint->isoc_next, xfer->nframes);
/* get the current frame index */
@@ -2718,10 +2718,10 @@
* check if the frame index is within the window where the frames
* will be inserted
*/
- buf_offset = (nframes - xfer->pipe->isoc_next) &
+ buf_offset = (nframes - xfer->endpoint->isoc_next) &
(EHCI_VIRTUAL_FRAMELIST_COUNT - 1);
- if ((xfer->pipe->is_synced == 0) ||
+ if ((xfer->endpoint->is_synced == 0) ||
(buf_offset < ((xfer->nframes + 7) / 8))) {
/*
* If there is data underflow or the pipe queue is empty we
@@ -2729,16 +2729,16 @@
* frame position. Else two isochronous transfers might
* overlap.
*/
- xfer->pipe->isoc_next = (nframes + 3) &
+ xfer->endpoint->isoc_next = (nframes + 3) &
(EHCI_VIRTUAL_FRAMELIST_COUNT - 1);
- xfer->pipe->is_synced = 1;
- DPRINTFN(3, "start next=%d\n", xfer->pipe->isoc_next);
+ xfer->endpoint->is_synced = 1;
+ DPRINTFN(3, "start next=%d\n", xfer->endpoint->isoc_next);
}
/*
* compute how many milliseconds the insertion is ahead of the
* current frame position:
*/
- buf_offset = (xfer->pipe->isoc_next - nframes) &
+ buf_offset = (xfer->endpoint->isoc_next - nframes) &
(EHCI_VIRTUAL_FRAMELIST_COUNT - 1);
/*
@@ -2764,11 +2764,11 @@
td = xfer->td_start[xfer->flags_int.curr_dma_set];
xfer->td_transfer_first = td;
- pp_last = &sc->sc_isoc_hs_p_last[xfer->pipe->isoc_next];
+ pp_last = &sc->sc_isoc_hs_p_last[xfer->endpoint->isoc_next];
/* store starting position */
- xfer->qh_pos = xfer->pipe->isoc_next;
+ xfer->qh_pos = xfer->endpoint->isoc_next;
while (nframes--) {
if (td == NULL) {
@@ -2875,7 +2875,7 @@
xfer->td_transfer_last = td_last;
/* update isoc_next */
- xfer->pipe->isoc_next = (pp_last - &sc->sc_isoc_hs_p_last[0]) &
+ xfer->endpoint->isoc_next = (pp_last - &sc->sc_isoc_hs_p_last[0]) &
(EHCI_VIRTUAL_FRAMELIST_COUNT - 1);
}
@@ -3636,12 +3636,12 @@
static void
ehci_pipe_init(struct usb_device *udev, struct usb_endpoint_descriptor *edesc,
- struct usb_pipe *pipe)
+ struct usb_endpoint *ep)
{
ehci_softc_t *sc = EHCI_BUS2SC(udev->bus);
- DPRINTFN(2, "pipe=%p, addr=%d, endpt=%d, mode=%d (%d)\n",
- pipe, udev->address,
+ DPRINTFN(2, "endpoint=%p, addr=%d, endpt=%d, mode=%d (%d)\n",
+ ep, udev->address,
edesc->bEndpointAddress, udev->flags.usb_mode,
sc->sc_addr);
@@ -3661,21 +3661,21 @@
}
switch (edesc->bmAttributes & UE_XFERTYPE) {
case UE_CONTROL:
- pipe->methods = &ehci_device_ctrl_methods;
+ ep->methods = &ehci_device_ctrl_methods;
break;
case UE_INTERRUPT:
- pipe->methods = &ehci_device_intr_methods;
+ ep->methods = &ehci_device_intr_methods;
break;
case UE_ISOCHRONOUS:
if (udev->speed == USB_SPEED_HIGH) {
- pipe->methods = &ehci_device_isoc_hs_methods;
+ ep->methods = &ehci_device_isoc_hs_methods;
} else if (udev->speed == USB_SPEED_FULL) {
- pipe->methods = &ehci_device_isoc_fs_methods;
+ ep->methods = &ehci_device_isoc_fs_methods;
}
break;
case UE_BULK:
if (udev->speed != USB_SPEED_LOW) {
- pipe->methods = &ehci_device_bulk_methods;
+ ep->methods = &ehci_device_bulk_methods;
}
break;
default:
@@ -3712,7 +3712,7 @@
if (xfer->xroot->udev == udev) {
- methods = xfer->pipe->methods;
+ methods = xfer->endpoint->methods;
if ((methods == &ehci_device_bulk_methods) ||
(methods == &ehci_device_ctrl_methods)) {
@@ -3746,7 +3746,7 @@
if (xfer->xroot->udev == udev) {
- methods = xfer->pipe->methods;
+ methods = xfer->endpoint->methods;
if ((methods == &ehci_device_bulk_methods) ||
(methods == &ehci_device_ctrl_methods)) {
==== //depot/projects/usb_buf/src/sys/dev/usb/controller/musb_otg.c#6 (text+ko) ====
@@ -1114,7 +1114,7 @@
uint8_t ep_no;
DPRINTFN(8, "addr=%d endpt=%d sumlen=%d speed=%d\n",
- xfer->address, UE_GET_ADDR(xfer->endpoint),
+ xfer->address, UE_GET_ADDR(xfer->endpointno),
xfer->sumlen, usb2_get_speed(xfer->xroot->udev));
temp.max_frame_size = xfer->max_frame_size;
@@ -1132,7 +1132,7 @@
temp.did_stall = !xfer->flags_int.control_stall;
sc = MUSBOTG_BUS2SC(xfer->xroot->bus);
- ep_no = (xfer->endpoint & UE_ADDR);
+ ep_no = (xfer->endpointno & UE_ADDR);
/* check if we should prepend a setup message */
@@ -1152,7 +1152,7 @@
}
if (x != xfer->nframes) {
- if (xfer->endpoint & UE_DIR_IN) {
+ if (xfer->endpointno & UE_DIR_IN) {
if (xfer->flags_int.control_xfr)
temp.func = &musbotg_setup_data_tx;
else
@@ -1249,7 +1249,7 @@
{
struct musbotg_softc *sc = MUSBOTG_BUS2SC(xfer->xroot->bus);
uint16_t temp;
- uint8_t ep_no = xfer->endpoint & UE_ADDR;
+ uint8_t ep_no = xfer->endpointno & UE_ADDR;
/*
* Only enable the endpoint interrupt when we are
@@ -1390,8 +1390,8 @@
{
usb_error_t err = 0;
- DPRINTFN(12, "xfer=%p pipe=%p transfer done\n",
- xfer, xfer->pipe);
+ DPRINTFN(12, "xfer=%p endpoint=%p transfer done\n",
+ xfer, xfer->endpoint);
/* reset scanner */
@@ -1439,8 +1439,8 @@
{
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
- DPRINTFN(2, "xfer=%p, pipe=%p, error=%d\n",
- xfer, xfer->pipe, error);
+ DPRINTFN(2, "xfer=%p, endpoint=%p, error=%d\n",
+ xfer, xfer->endpoint, error);
if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
@@ -1454,14 +1454,14 @@
static void
musbotg_set_stall(struct usb_device *udev, struct usb_xfer *xfer,
- struct usb_pipe *pipe)
+ struct usb_endpoint *ep)
{
struct musbotg_softc *sc;
uint8_t ep_no;
USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
- DPRINTFN(4, "pipe=%p\n", pipe);
+ DPRINTFN(4, "endpoint=%p\n", ep);
if (xfer) {
/* cancel any ongoing transfers */
@@ -1470,12 +1470,12 @@
/* set FORCESTALL */
sc = MUSBOTG_BUS2SC(udev->bus);
- ep_no = (pipe->edesc->bEndpointAddress & UE_ADDR);
+ ep_no = (ep->edesc->bEndpointAddress & UE_ADDR);
/* select endpoint */
MUSB2_WRITE_1(sc, MUSB2_REG_EPINDEX, ep_no);
- if (pipe->edesc->bEndpointAddress & UE_DIR_IN) {
+ if (ep->edesc->bEndpointAddress & UE_DIR_IN) {
MUSB2_WRITE_1(sc, MUSB2_REG_TXCSRL,
MUSB2_MASK_CSRL_TXSENDSTALL);
} else {
@@ -1636,12 +1636,12 @@
}
static void
-musbotg_clear_stall(struct usb_device *udev, struct usb_pipe *pipe)
+musbotg_clear_stall(struct usb_device *udev, struct usb_endpoint *ep)
{
struct musbotg_softc *sc;
struct usb_endpoint_descriptor *ed;
- DPRINTFN(4, "pipe=%p\n", pipe);
>>> TRUNCATED FOR MAIL (1000 lines) <<<
More information about the p4-projects
mailing list