PERFORCE change 155680 for review
Remko Lodder
remko at FreeBSD.org
Mon Jan 5 21:27:21 UTC 2009
http://perforce.freebsd.org/chv.cgi?CH=155680
Change 155680 by remko at remko_nakur on 2009/01/05 21:27:08
Import WIP version that I did at the Snow HQ today.
Facilitated by: Snow B.V.
Affected files ...
.. //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/faq/book.sgml#14 edit
Differences ...
==== //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/faq/book.sgml#14 (text+ko) ====
@@ -5,7 +5,7 @@
$FreeBSD$
%SOURCE% en_US.ISO8859-1/books/faq/book.sgml
- %SRCID% 1.1078
+ %SRCID% 1.1104
-->
<!DOCTYPE book PUBLIC "-//FreeBSD//DTD DocBook V4.1-Based Extension//EN" [
@@ -39,6 +39,7 @@
<year>2006</year>
<year>2007</year>
<year>2008</year>
+ <year>2009</year>
<holder>The &os; Dutch Documentation Project</holder>
</copyright>
@@ -372,12 +373,12 @@
<answer>
<para><ulink
- url="&url.books.handbook;/cutting-edge.html#CURRENT">&os.current;</ulink>
+ url="&url.books.handbook;/cutting-stable.html#CURRENT">&os.current;</ulink>
is de ontwikkel versie van het besturingssysteem, welke over
enige tijd de nieuwe &os.stable; tak wordt. Hierdoor is het
eigenlijk alleen interessant voor ontwikkelaars die aan het
systeem werken, en voor die-hard hobbyisten. Ze de <ulink
- url="&url.books.handbook;/cutting-edge.html#CURRENT">relevante sectie</ulink>
+ url="&url.books.handbook;/cutting-stable.html#CURRENT">relevante sectie</ulink>
in het <ulink
url="&url.books.handbook;/index.html">handboek</ulink> voor
details over het draaien van
@@ -663,15 +664,9 @@
<para>Het project produceert een grote verscheidenheid
aan documentatie welke online beschikbaar is via de
volgende link <ulink
- url="http://www.FreeBSD.org/docs.html"></ulink>. Deze
- documenten zijn beschikbaar als pakket, zodat het makkelijk
- geïnstalleerd kan worden op het &os; systeem. Meer
- details over documentatie pakketten kan gevonden worden
- in de volgende paragraven.</para>
-
- <para>Daarnaast refereren <link
- linkend="bibliography">de bibliografie</link> aan het
- eind van deze FAQ en <ulink
+ url="http://www.FreeBSD.org/docs.html"></ulink>. Daarnaast
+ is er <link linkend="bibliography">de bibliografie</link>
+ aan het eind van deze FAQ en <ulink
url="&url.books.handbook;/bibliography.html">de versie in het handbook</ulink>
naar andere aangeraden boeken.</para>
</answer>
@@ -911,17 +906,7 @@
<row>
<entry><literal>rtf</literal></entry>
- <entry>Microsoft's Rich Text Format<footnote>
- <para>Pagina nummers worden niet automatisch
- geupdate wanneer ze worden ingeladen in
- Word. Druk op <keycombo
- action="simul"><keycap>CTRL</keycap><keycap>A</keycap></keycombo>,
- <keycombo
- action="simul"><keycap>CTRL</keycap><keycap>END</keycap></keycombo>,
- <keycap>F9</keycap> nadat het document geladen
- is om de pagina nummering te updaten.</para>
- </footnote>
- </entry>
+ <entry>Microsoft's Rich Text Format</entry>
</row>
<row>
@@ -932,6 +917,16 @@
</tbody>
</tgroup>
</informaltable>
+
+ <note>
+ <para>Page numbers are not automatically updated when
+ loading Rich Text Format into Word. Press <keycombo
+ action="simul"><keycap>Ctrl</keycap><keycap>A</keycap></keycombo>,
+ <keycombo
+ action="simul"><keycap>Ctrl</keycap><keycap>End</keycap></keycombo>,
+ <keycap>F9</keycap> after loading the document, to
+ update the page numbers.</para>
+ </note>
</listitem>
<listitem>
@@ -982,8 +977,8 @@
<row>
<entry><literal>bz2</literal></entry>
- <entry>Het BZip2 formaat. Minder verspreid
- dan Zip, maar levert gemiddeld kleinere
+ <entry>Het <literal>bzip2</literal> formaat. Minder verspreid
+ dan <literal>zip</literal>, maar levert gemiddeld kleinere
betanden. Installeer de <filename
role="package">archivers/bzip2</filename>
port om deze bestanden te
@@ -1174,6 +1169,12 @@
kan meer informatie krijgen op de <ulink
url="http://www.freebsdmall.com/">web site</ulink>.</para>
+ <para>BSD Certification Group, Inc. provides system
+ administration certifications for DragonFly BSD, &os;, NetBSD,
+ OpenBSD. If you are interested in them, visit <ulink
+ url="http://www.BSDCertification.org">their site</ulink>.
+ </para>
+
<para>Elke andere organisatie die training en ondersteuning
aanbied, zou het project moeten informeren om hier ook
vermeld te worden.</para>
@@ -1524,362 +1525,384 @@
laptop &os; niet kan opstarten en waar het mogelijk is
om de BIOS te upgraden of downgraden.</para>
- <para>If you have an earlier BIOS, and upgrading is not an
- option, a workaround is to install &os;, change the partition
- ID &os; uses, and install new boot blocks that can handle
- the different partition ID.</para>
+ <para>Als je een eerdere BIOS hebt, en upgraden is geen
+ optie is er nog een workaround om &os; te installeren,
+ verander het partitie ID dat &os; gebruikt en installeer
+ de nieuwe opstart blokken zodat deze overweg kan met
+ een ander partitie ID.</para>
- <para>First, you will need to restore the machine to a state
- where it can get through its self-test screen. Doing this
- requires powering up the machine without letting it find a
- &os; partition on its primary disk. One way is to remove
- the hard disk and temporarily move it to an older ThinkPad
- (such as a ThinkPad 600) or a desktop PC with an appropriate
- conversion cable. Once it is there, you can delete the &os;
- partition and move the hard disk back. The ThinkPad should
- now be in a bootable state again.</para>
+ <para>Als eerste moet de machine in een staat worden
+ teruggebracht waardoor het door zijn zelf-test scherm
+ heen komt. Om dit te doen moet de machine aangezet worden
+ zonder dat het een &os; parititie kan vinden op de primaire
+ schijf. Één mogelijkheid is om de harde
+ schijf te verwijderen en deze tijdelijk in een oudere
+ ThinkPad (zoals de ThinkPad 600) stoppen of in een
+ desktop PC met een juiste conversie kabel. Zodra deze
+ er is kun je de &os; partitie verwijderen en de harde
+ schijf terugzetten. De ThinkPAd zou nu weer opstartbaar
+ moeten zijn.</para>
- <para>With the machine functional again, you can use the
- workaround procedure described here to get a working &os;
- installation.</para>
+ <para>Als de machine wederom functioneel is, kan de
+ workaround procedure die hier beschreven is gebruikt
+ worden om een werkende &os; installatie te krijgen:</para>
<procedure>
<step>
- <para>Download <filename>boot1</filename> and
- <filename>boot2</filename> from <ulink
+ <para>Download <filename>boot1</filename> en
+ <filename>boot2</filename> van <ulink
url="http://people.FreeBSD.org/~bmah/ThinkPad/"></ulink>.
- Put these files somewhere you will be able to retrieve
- them later.</para>
+ Plaats deze bestanden ergens zodat ze later nog opgehaald
+ kunnen worden.</para>
</step>
<step>
- <para>Install &os; as normal on to the ThinkPad.
- <emphasis>Do not</emphasis> use <literal>Dangerously
- Dedicated</literal> mode. <emphasis>Do not</emphasis>
- reboot when the install has finished.</para>
+ <para>Installeer &os; zoals normaal op de ThinkPad.
+ <emphasis>Maak geen</emphasis> gebruik van de
+ <literal>Dangerously Dedicated</literal> mode.
+ <emphasis>Herstart niet</emphasis> nadat de installatie
+ voltooid is.</para>
</step>
<step>
- <para>Either switch to the <quote>Emergency Holographic
- Shell</quote> (<keycombo
- action="simul"><keycap>Alt</keycap><keycap>F4</keycap></keycombo>)
- or start a <quote>fixit</quote> shell.</para>
+ <para>Wissel of naar de <quote>Emergency Holographic
+ Shell</quote> (<keycombo action="simul">
+ <keycap>Alt</keycap><keycap>F4</keycap></keycombo>)
+ of start een <quote>fixit</quote> shell.</para>
</step>
<step>
- <para>Use &man.fdisk.8; to change the &os; partition ID
- from <literal>165</literal> to <literal>166</literal>
- (this is the type used by OpenBSD).</para>
+ <para>Gebruik &man.fdisk.8; om de &os; parititie ID
+ van <literal>165</literal> naar <literal>166</literal>
+ te wijzigen (dit is het type dat gebruikt wordt door
+ OpenBSD).</para>
</step>
<step>
- <para>Bring the <filename>boot1</filename> and
- <filename>boot2</filename> files to the local file
- system.</para>
+ <para>Haal de <filename>boot1</filename> en
+ <filename>boot2</filename> bestanden naar het lokale
+ bestandssysteem.</para>
</step>
<step>
- <para>Use &man.disklabel.8; to write
- <filename>boot1</filename> and <filename>boot2</filename>
- to your &os; slice.</para>
+ <para>Gebruik &man.disklabel.8; om
+ <filename>boot1</filename> en <filename>boot2</filename>
+ naar de &os; partitie te schrijven.</para>
<screen>&prompt.root; <userinput>disklabel -B -b boot1 -s boot2 ad0s<replaceable>n</replaceable></userinput></screen>
- <para><replaceable>n</replaceable> is the number of the
- slice where you installed &os;.</para>
+ <para><replaceable>n</replaceable> is het nummer van de
+ partitie waarop &os; geïnstalleerd is.</para>
</step>
<step>
- <para>Reboot. At the boot prompt you will be given the
- option of booting <literal>OpenBSD</literal>. This will
- actually boot &os;.</para>
+ <para>Reboot. Op de boot prompt wordt de optie getoond
+ om <literal>OpenBSD</literal> op te starten.
+ Uiteindelijk zal dit &os; opstarten.</para>
</step>
</procedure>
- <para>Getting this to work in the case where you want to dual
- boot OpenBSD and &os; on the same laptop is left as an
- exercise for the reader.</para>
+ <para>Om zowel OpenBSD als &os; op te kunnen starten, zult u
+ zelf één en ander moeten uitzoeken en
+ proberen.</para>
</answer>
</qandaentry>
<qandaentry>
<question id="install-bad-blocks">
- <para>Can I install on a disk with bad blocks?</para>
+ <para>Kan ik een installatie doen op een schijf met
+ <quote>bad blocks</quote>?</para>
</question>
<answer>
- <para>You can, but it is a bad idea.</para>
+ <para>Ja dit kan, maar het is een slecht idee.</para>
- <para>If you are seeing bad block errors with a modern IDE
- drive, chances are the drive is going to die very soon (the
- drive's internal remapping functions are no longer
- sufficient to fix the bad blocks, which means the disk is
- heavily corrupted); we suggest you buy a new hard
- drive.</para>
+ <para>Als je <quote>bad block errors</quote> ziet op een
+ moderne IDE schijf, is de kans groot dat deze spoedig
+ stuk gaat (de interne herstel functies van de schijf zijn
+ niet langer in staat om de bad blocks te repareren wat
+ betekend dat de disk ernstig corrupt is); we raden aan
+ dat u een nieuwe harde schijf koopt.</para>
- <para>If you have a SCSI drive with bad blocks, see <link
- linkend="awre">this answer</link>.</para>
+ <para>Als u een SCSI schijf heeft met bad blocks zie dan
+ <link linkend="awre">dit antwoord</link>.</para>
</answer>
</qandaentry>
<qandaentry>
<question id="boot-floppy-strangeness">
- <para>Strange things happen when I boot the install floppy!
- What is happening?</para>
+ <para>Er gebeuren rare dingen wanneer ik opstart met de
+ installatie floppy. Wat is er aan de hand?</para>
</question>
<answer>
- <para>If you are seeing things like the machine grinding to a
- halt or spontaneously rebooting when you try to boot the
- install floppy, here are three questions to ask
- yourself:</para>
+ <para>Als u dingen ziet zoals dat de machine krakend en
+ piepend tot stilstand komt, of spontaan herstart wanneer
+ u start met de installatie floppy, zijn er drie vragen die
+ u zichzelf moet stellen:</para>
<orderedlist>
<listitem>
- <para>Did you use a new, freshly-formatted, error-free
- floppy (preferably a brand-new one straight out of the
- box, as opposed to the magazine cover disk that has been
- lying under the bed for the last three years)?</para>
+ <para>Heeft u een nieuwe, vers geformatteerde, error-vrije
+ floppy gebruikt (bij voorkeur een hele nieuwe direct uit
+ het doosje, in tegenstelling tot de boekenlegger die al
+ jaren onder bed ligt)?</para>
</listitem>
<listitem>
- <para>Did you download the floppy image in binary (or
- image) mode? (do not be embarrassed, even the best of us
- have accidentally downloaded a binary file in ASCII mode
- at least once!)</para>
+ <para>Heeft u de floppy bestanden gedownload in binary
+ (of image) mode? (Geneer u niet, zelfs de besten van ons
+ hebben per ongeluk een binair bestand gedownload in
+ ASCII mode!)</para>
</listitem>
<listitem>
- <para>If you are using &windows; 95 or
- &windows; 98 did you run <command>fdimage</command>
- or <command>rawrite</command> in pure DOS mode? These
- operating systems can interfere with programs that write
- directly to hardware, which the disk creation program
- does; even running it inside a DOS shell in the GUI can
- cause this problem.</para>
+ <para>Als u gebruik maakt van &windows; 95 of
+ &windows; 98 heeft u dan gebruik gemaakt van
+ <command>fdimage</command> of <command>rawrite</command>
+ in pure DOS mode? Deze besturingssystemen kunnen
+ invloed hebben op programma's die direct schrijven
+ naar de hardware, welke het disk creatie programma
+ gebruikt; zelfs het draaien in een DOS shell vanuit
+ de GUI kan problemen veroorzaken.</para>
</listitem>
</orderedlist>
- <para>There have also been reports of &netscape; causing
- problems when downloading the boot floppy, so it is probably
- best to use a different FTP client if you can.</para>
+ <para>Er zijn ook rapporten van &netscape; welke problemen
+ geeft wanneer de opstart floppy's gedownload worden, dus
+ het is waarschijnlijk slim om een andere FTP cliënt
+ te gebruiken waar mogelijk.</para>
</answer>
</qandaentry>
<qandaentry>
<question id="no-install-cdrom">
- <para>I booted from my ATAPI CD-ROM, but the install program
- says no CD-ROM is found. Where did it go?</para>
+ <para>Ik ben opgestart vanaf mijn ATAPI CD-ROM, maar het
+ installatie programma zegt dat er geen CD-ROM is
+ gevonden. Waar is deze heen?</para>
</question>
<answer>
- <para>The usual cause of this problem is a mis-configured
- CD-ROM drive. Many PCs now ship with the CD-ROM as the slave
- device on the secondary IDE controller, with no master
- device on that controller. This is illegal according to the
- ATAPI specification, but &windows; plays fast and loose with
- the specification, and the BIOS ignores it when booting.
- This is why the BIOS was able to see the CD-ROM to boot from
- it, but why &os; cannot see it to complete the
- install.</para>
+ <para>De meest voorkomende oorzaak van dit probleem is een
+ foutief geconfigureerde CD-ROM drive. De meeste PC's
+ worden nu verscheept met de CD-ROM speler als het slaaf
+ apparaat op de tweede IDE controller zonder master
+ apparaat op de controller. Dit mag eigenlijk niet vanuit de
+ ATAPI specificatie, maar &windows; speelt met deze
+ specificatie, en de BIOS negeert dit wanneer er wordt
+ opgestart. Dit is de reden waarom het BIOS in staat was om
+ de CD-ROM te zien waarvanaf opgestart moest worden, maar
+ ook waarom &os; deze niet kan zien om de installatie af te
+ maken.</para>
- <para>Reconfigure your system so that the CD-ROM is either the
- master device on the IDE controller it is attached to, or
- make sure that it is the slave on an IDE controller that
- also has a master device.</para>
+ <para>Herconfigureer uw systeem dusdanig dat de CD-ROM ofwel
+ het master apparaat is op de IDE controller waaraan hij
+ vast zit, of zorg ervoor dat het d slaaf is op een IDE
+ controller waar ook een master apparaat aan vast zit.</para>
</answer>
</qandaentry>
<qandaentry>
<question id="install-PLIP">
- <para>Can I install on my laptop over PLIP (Parallel Line
- IP)?</para>
+ <para>Kan ik een installatie op mijn laptop doen over PLIP
+ (Parallel Line IP)?</para>
</question>
<answer>
- <para>Yes. Use a standard Laplink cable. If necessary, you
- can check out the <ulink
- url="&url.books.handbook;/network-plip.html">PLIP section of the Handbook</ulink>
- for details on parallel port networking.</para>
+ <para>Ja. Gebruik een standaard Laplink kabel. Indien nodig
+ kunt u de <ulink
+ url="&url.books.handbook;/network-plip.html">PLIP sectie van het handbook</ulink>
+ raadplegen voor meer informatie over paralelle poort netwerken.</para>
</answer>
</qandaentry>
<qandaentry>
<question id="geometry">
- <para>Which geometry should I use for a disk drive?</para>
+ <para>Welke geometrie moet gebruikt worden door een disk drive?</para>
</question>
<answer>
<note>
- <para>By the <quote>geometry</quote> of a disk, we mean
- the number of cylinders, heads and sectors/track on a
- disk. We will refer to this as C/H/S for convenience.
- This is how the PC's BIOS works out which area on a disk
- to read/write from.</para>
+ <para>Met de <quote>geometrie</quote> van een schijf,
+ bedoelen we het aantal cylinders, heads en sectoren/tracks
+ op een disk. We verwijzen hiernaar als C/H/S voor de
+ makkelijkheid. Dit wordt gebruikt door de PC's BIOS
+ om uit te vinden op welk deel van de schijf gelezen of
+ geschreven moet worden.</para>
</note>
- <para>This causes a lot of confusion among new system
- administrators. First of all, the
- <emphasis>physical</emphasis> geometry of a SCSI drive is
- totally irrelevant, as &os; works in term of disk blocks.
- In fact, there is no such thing as <quote>the</quote>
- physical geometry, as the sector density varies across the
- disk. What manufacturers claim is the <quote>physical
- geometry</quote> is usually the geometry that they have
- determined wastes the least space. For IDE disks, &os; does
- work in terms of C/H/S, but all modern drives internally
- convert this into block references.</para>
+ <para>Dit zorgt voor een berg verwarring voor nieuwe systeem
+ beheerders. Als eerste is de <emphasis>fysieke</emphasis>
+ geometrie van een SCSI schijf totaal irrelevant, omdat &os;
+ werkt in termen van disk blokken. In feite s er niet zoiets
+ als <quote>de</quote> fysieke geometrie, omdat de sector
+ dichtheid varieert op de schijf. Wat de leverancier claimt
+ is dat de <quote>fysieke geometrie</quote> meestal geometrie
+ is waarvan ze denken dat het de minste schijfruimte kost.
+ Voor IDE schijven doet &os; dit in termen van C/H/S, maar
+ alle moderne schijven veranderen dit intern in blok
+ referenties.</para>
- <para>All that matters is the <emphasis>logical</emphasis>
- geometry. This is the answer that the BIOS gets when it
- asks the drive <quote>what is your geometry?</quote> It then
- uses this geometry to access the disk. As &os; uses the
- BIOS when booting, it is very important to get this right.
- In particular, if you have more than one operating system on
- a disk, they must all agree on the geometry. Otherwise you
- will have serious problems booting!</para>
+ <para>Alles wat van belang is, is de
+ <emphasis>logische</emphasis> geometrie. Dit is het
+ antwoord dat de BIOS krijgt wanneer het deze de disk
+ vraagt <quote>wat is jouw geometrie?</quote> Daarna
+ wordt deze geometrie gebruikt om de disk te benaderen.
+ Omdat &os; de BIOS gebruikt tijdens het opstarten, is
+ het belangrijk om dit juist te hebben. In het bijzonder
+ als je meer dan één besturingssysteem op
+ een schijf hebt, moeten ze het allemaal eens zijn over
+ de geometrie. Anders zult u serieuze problemen zijn
+ tijdens het opstarten!</para>
- <para>For SCSI disks, the geometry to use depends on whether
- extended translation support is turned on in your controller
- (this is often referred to as <quote>support for DOS disks
- >1GB</quote> or something similar). If it is turned off,
- then use <replaceable>N</replaceable> cylinders, 64 heads
- and 32 sectors/track, where <replaceable>N</replaceable> is
- the capacity of the disk in MB. For example, a 2GB disk
- should pretend to have 2048 cylinders, 64 heads and 32
- sectors/track.</para>
+ <para>Voor SCSI schijven is de geometrie die gebruikt
+ wordt afhankelijk van of <quote>extended translation
+ support</quote> is ingeschakeld in de controller (meestal
+ wordt hiernaar toe verwezen als <quote>support voor DOS
+ schijven >1GB</quote> of iets soortgelijks). Als deze
+ uitstaat, gebruik dan <replaceable>N</replaceable> cylinders,
+ 64 heads en 32 sectoren/tracks, waar
+ <replaceable>N</replaceable> de capaciteit in MB's is.
+ Bijvoorbeeld een 2GB disk zou moeten doen alsof het 2048
+ cylinders heeft, 64 heads en 32 sectoren/tracks.</para>
- <para>If it <emphasis>is</emphasis> turned on (it is often
- supplied this way to get around certain limitations in
- &ms-dos;) and the disk capacity is more than 1 GB, use
- <replaceable>M</replaceable> cylinders, 63 sectors per track
- (<emphasis>not</emphasis> 64), and 255 heads, where
- <replaceable>M</replaceable> is the disk capacity in MB
- divided by 7.844238 (!). So our example 2 GB drive
- would have 261 cylinders, 63 sectors per track and 255
- heads.</para>
+ <para>Als het <emphasis>is</emphasis> ingeschakeld (het wordt
+ meestal gebruikt als manier om bepaalde beperkingen van
+ &ms-dos; te omzeilen), en de capaciteit van de schijf is
+ meer dan 1 GB, gebruik <replaceable>M</replaceable>
+ cylinders, 63 sectoren per track (<emphasis>niet</emphasis>
+ 64) en 255 heads, waar <replaceable>M</replaceable> de disk
+ capaciteit in MB's is gedeeld door 7.844238(!). Dus onze
+ voorbeeld 2 GB schijven zou 261 cylinders, 63 sectoren
+ per track moeten hebben en 255 heads.</para>
- <para>If you are not sure about this, or &os; fails to detect
- the geometry correctly during installation, the simplest way
- around this is usually to create a small DOS partition on
- the disk. The BIOS should then detect the correct geometry,
- and you can always remove the DOS partition in the partition
- editor if you do not want to keep it. You might want to
- leave it around for programming network cards and the like,
- however.</para>
+ <para>Als u niet zeker hierover bent, of als &os; faalt om de
+ geometrie goed te detecteren tijdens de installatie, is de
+ simpelste manier om dit omzeilen door een kleine DOS
+ partitie aan te maken op de schijf. De BIOS zou dan de
+ juiste geometrie moeten detecteren, de DOS parititie kan
+ altijd verwijderd worden in de partitie editor als u deze
+ niet wilt bewaren. U kunt echter overwegen hem te bewaren
+ voor als u uw netwerk kaarten en dergelijke moet
+ inprogrammeren.</para>
- <para>Alternatively, there is a freely available utility
- distributed with &os; called
- <filename>pfdisk.exe</filename>. You can find it in the
- <filename role="directory">tools</filename> subdirectory on
- the &os; CD-ROM or on the various &os; FTP sites. This
- program can be used to work out what geometry the other
- operating systems on the disk are using. You can then enter
- this geometry in the partition editor.</para>
+ <para>Als alternatief is er een vrijelijk beschikbare tool
+ welke geleverd wordt bij &os; genaamd
+ <filename>pfdisk.exe</filename>. U kunt deze vinden in de
+ <filename role="directory">tools</filename> subdirectory op
+ de &os; CD-ROM of op de verschillende FTP servers. Dit
+ programma kan gebruikt worden om te bepalen welke geometrie
+ de andere besturingssystemen gebruiken op de schijven die u
+ gebruikt. Daarna kunt u deze geometrie invoeren in de
+ partitie bewerker.</para>
</answer>
</qandaentry>
<qandaentry>
<question id="disk-divide-restrictions">
- <para>Are there any restrictions on how I divide the disk
- up?</para>
+ <para>Zijn er enige restricties over hoe ik de disk moet
+ indelen?</para>
</question>
<answer>
- <para>Yes. You must make sure that your root partition is
- below 1024 cylinders so the BIOS can boot the kernel from it.
- (Note that this is a limitation in the PC's BIOS, not
- &os;).</para>
+ <para>Ja. U moet ervoor zorgen dat uw root partitie zich
+ onder de 1024 cylinders bevind zodat de BIOS in staat is
+ om de kernel ervanaf te starten (Let op, dit is een
+ limitatie van de BIOS van de PC en niet van &os;).</para>
- <para>For a SCSI drive, this will normally imply that the root
- partition will be in the first 1024 MB (or in the first
- 4096 MB if extended translation is turned on - see
- previous question). For IDE, the corresponding figure is
- 504 MB.</para>
+ <para>Voor een SCSI schijf betekend dit normaal gesproken dat
+ de root partitie in de eerste 1024 MB zit (of in de
+ eerste 4096 MB als extended translation is
+ ingeschakeld - zie de vorige vraag). Voor IDE is het
+ corresponderende plaatje 504 MB.</para>
</answer>
</qandaentry>
<qandaentry>
<question id="disk-manager">
- <para>Is &os; compatible with any disk managers?</para>
+ <para>Is &os; compatible met enige schijf managers?</para>
</question>
<answer>
- <para>&os; recognizes the <application>Ontrack Disk
- Manager</application> and makes allowances for it. Other disk
- managers are not supported.</para>
+ <para>&os; herkent d <application>Ontrack Disk
+ Manager</application> en accepteert deze. Andere schijf
+ managers worden niet ondersteund.</para>
- <para>If you just want to use the disk with &os; you do not
- need a disk manager. Just configure the disk for as much
- space as the BIOS can deal with (usually
- 504 megabytes), and &os; should figure out how much
- space you really have. If you are using an old disk with an
- MFM controller, you may need to explicitly tell &os; how
- many cylinders to use.</para>
+ <para>Als u de schijf alleen wilt gebruiken met &os; heeft
+ u geen schijf manager nodig. Configureer de schijf voor
+ zoveel mogelijk ruimte als de BIOS mee overweg kan (meestal
+ 504 megabytes) waarna &os; in staat is om uit te zoeken
+ hoeveel ruimte u daadwerkelijk heeft. Als u een oude schijf
+ gebruikt met een MFM controller, is het mogelijk dat u &os;
+ moet vertellen hoeveel cylinders u precies heeft.</para>
- <para>If you want to use the disk with &os; and another
- operating system, you may be able to do without a disk
- manager: just make sure the &os; boot partition and the
- slice for the other operating system are in the first 1024
- cylinders. If you are reasonably careful, a
- 20 megabyte boot partition should be plenty.</para>
+ <para>Als u de disk wilt gebruiken met &os; en een ander
+ besturingssysteem, kan dit wellicht gedaan worden zonder
+ schijf manager: zorg er alleen voor dat de &os; opstart
+ partitie en de slice voor het andere besturingssysteem zich
+ in de eerste 1024 cylinders bevind. Als u redelijk
+ voorzichtib bent is een 20 megabyte opstart partitie
+ voldoende.</para>
</answer>
</qandaentry>
<qandaentry>
<question id="missing-os">
- <para>When I boot &os; for the first time after install I get
- <errorname>Missing Operating System</errorname>. What is
- happening?</para>
+ <para>Wanneer ik &os; opstart voor de eerste keer na de
+ installatie krijg ik de melding <errorname>Missing
+ Operating System</errorname>. Wat is er aan de hand?</para>
</question>
<answer>
- <para>This is classically a case of &os; and DOS or some other
- OS conflicting over their ideas of disk <link
- linkend="geometry">geometry</link>. You will have to
- reinstall &os;, but obeying the instructions given above
- will almost always get you going.</para>
+ <para>Dit is een klassiek geval van &os; en DOS of en ander
+ OS die conflicteert met hun ideëen over de schijf <link
+ linkend="geometry">geometrie</link>. U moet &os; opnieuw
+ installeren, maar door het luisteren naar de instructies
+ die hierboven gegeven zijn, krijgt u bijna altijd wat u
+ wilt.</para>
</answer>
</qandaentry>
<qandaentry>
<question id="stop-at-boot-manager">
- <para>Why can I not get past the boot manager's
+ <para>Waarom kom ik niet langs de boot manager's
<prompt>F?</prompt> prompt?</para>
</question>
<answer>
- <para>This is another symptom of the problem described in the
- preceding question. Your BIOS geometry and &os; geometry
- settings do not agree! If your controller or BIOS supports
- cylinder translation (often marked as <quote>>1GB drive
- support</quote>), try toggling its setting and reinstalling
- &os;.</para>
+ <para>Dit is een ander symptoom van het proleem beschreven in
+ voorgaande vraag. Uw BIOS geometrie en &os; geometrie
+ instellingen komen niet overeen! Als uw controller of BIOS
+ cylinder translation ondersteund (veelal gemarkeerd als
+ <quote>>1GB drive support</quote>), probeert u dan de
+ instelling in te schakelen en vervolgens &os; te
+ herinstalleren.</para>
</answer>
</qandaentry>
<qandaentry>
<question id="need-complete-sources">
- <para>Do I need to install the complete sources?</para>
+ <para>Moet ik de complete bronnen installeren?</para>
</question>
<answer>
- <para>In general, no. However, we would strongly recommend
- that you install, at a minimum, the <literal>base</literal>
- source kit, which includes several of the files mentioned
- here, and the <literal>sys</literal> (kernel) source kit,
- which includes sources for the kernel. There is nothing in
- the system which requires the presence of the sources to
- operate, however, except for the kernel-configuration
- program &man.config.8;. With the exception of the kernel
- sources, our build structure is set up so that you can
- read-only mount the sources from elsewhere via NFS and still
- be able to make new binaries (due to the kernel-source
- restriction, we recommend that you not mount this on
- <filename role="directory">/usr/src</filename> directly, but
- rather in some other location with appropriate symbolic
- links to duplicate the top-level structure of the source
- tree).</para>
+ <para>In het algemeen, nee. Echter, we raden u sterk aan dat
+ u minstens de <literal>base</literal> source kit te
+ installeren, welke een aantal van de bestanden die hier
+ genoemd zijn hebben, en de <literal>sys</literal> (kernel)
+ source kit welke de bronnen bevat voor de kernel. Er is
+ niets in het systeem dat vereist dat de broncode aanwezig
+ is om te kunnen draaien, apart van het kernel configuratie
+ programma &man.config.8;. Met de uitzondering van de
+ kernel broncode, is onze bouw structuur dermate opgezet
+ dat u deze alleen-lezen kunt lezen door de broncode via
+ NFS te benaderen, waarbij het nog steeds mogelijk is om
+ nieuwe binaries te maken (door de kernel-broncode
+ restricties, raden we u aan om deze niet te koppelen aan
+ de <filename role="directory">/usr/src</filename> directory,
+ , maar in een andere directory met een symbolische link
+ om de top-level structuur te dupliceren van de broncode
+ boom).</para>
<para>Having the sources on-line and knowing how to build a
system with them will make it much easier for you to upgrade
@@ -2593,9 +2616,9 @@
&man.kbdmux.4; driver type the following commands:</para>
<screen>&prompt.root; <userinput>kbdcontrol -K < /dev/console > /dev/null</userinput>
-<userinput>kbdcontrol -a atkbd0 < /dev/kbdmux0 > /dev/null</userinput>
-<userinput>kbdcontrol -a ukbd1 < /dev/kbdmux0 > /dev/null</userinput>
-<userinput>kbdcontrol -k /dev/kbdmux0 < /dev/console > /dev/null</userinput></screen>
+&prompt.root; <userinput>kbdcontrol -a atkbd0 < /dev/kbdmux0 > /dev/null</userinput>
+&prompt.root; <userinput>kbdcontrol -a ukbd1 < /dev/kbdmux0 > /dev/null</userinput>
+&prompt.root; <userinput>kbdcontrol -k /dev/kbdmux0 < /dev/console > /dev/null</userinput></screen>
<para>See the &man.ukbd.4;, &man.kbdcontrol.1; and
&man.kbdmux.4; manual pages for more information.</para>
@@ -5255,13 +5278,13 @@
tolerate this much risk, do not use Soft Updates on the root
file system!</para>
- <para><filename>/</filename> is traditionally one of the
+ <para><filename class="directory">/</filename> is traditionally one of the
smallest partitions. If you put the
- <filename>/tmp</filename> directory on
- <filename>/</filename> and you have a busy
- <filename>/tmp</filename>, you might see intermittent space
- problems. Symlinking <filename>/tmp</filename> to
- <filename>/var/tmp</filename> will solve this
+ <filename class="directory">/tmp</filename> directory on
+ <filename class="directory">/</filename> and you have a busy
+ <filename class="directory">/tmp</filename>, you might see intermittent space
+ problems. Symlinking <filename class="directory">/tmp</filename> to
+ <filename class="directory">/var/tmp</filename> will solve this
problem.</para>
</answer>
</qandaentry>
@@ -6392,6 +6415,12 @@
<screen>&prompt.root; <userinput>sysctl hw.syscons.kbd_reboot=0</userinput></screen>
+ <note>
+ <para>The above two methods are exclusive: The &man.sysctl.8;
+ does not exist if you compile your kernel with the
+ <literal>SC_DISABLE_REBOOT</literal> option.</para>
+ </note>
+
<para>If you use the &man.pcvt.4; console driver, use the
following kernel configuration line instead and rebuild the
kernel:</para>
@@ -6502,45 +6531,22 @@
</question>
<answer>
- <para>If you have lot of <command>telnet</command>,
- <command>ssh</command>, X, or <command>screen</command> users,
- you will probably run out of pseudoterminals. Here is how
- to add more:</para>
+ <para>If you have a lot of <command>telnet</command>,
+ <command>ssh</command>, X, or <command>screen</command>
+ users, you might run out of pseudoterminals. By default,
+ &os; 6.2 and earlier support 256 pseudoterminals, while
+ &os; 6.3 and later support 512 pseudoterminals.</para>
- <procedure>
- <step>
- <para>Build and install a new kernel with the line in
- the configuration file:</para>
-
- <programlisting>device pty <replaceable>N</replaceable></programlisting>
-
- <para>where <replaceable>N</replaceable> is the number
- of requested pseudoterminals.</para>
- </step>
-
- <step>
- <para>Edit <filename>/etc/ttys</filename> and add lines
- for each of the <replaceable>N</replaceable> terminals.
- They should match the form of the existing entries, i.e.
- they look like this:</para>
-
- <programlisting>ttyqc none network</programlisting>
-
- <para>The order of the letter designations is
- <literal>tty[pqrsPQRSlmnoLMNO][0123456789abcdefghijklmnopqrstuv]</literal>,
- using a regular expression.</para>
- </step>
-
- <step>
- <para>Reboot the system with the new kernel and you are
- ready to go.</para>
- </step>
- </procedure>
-
- <note>
- <para>Using more than 256 (up to 512) &man.pty.4; devices
- requires &os; 6.3 or later.</para>
- </note>
+ <tip>
+ <para>If needed, more pseudoterminals can be added.
+ However, this requires patching the standard C library,
+ the kernel, and <filename>/etc/ttys</filename>. For
+ example, <ulink
+ url="http://www.freebsd.org/~jhb/patches/pty_1152.patch"></ulink>
+ expands the number of pseudoterminals to 1152. Note that
+ the patch will only apply cleanly to &os; 6.3 or
+ later.</para>
+ </tip>
</answer>
</qandaentry>
@@ -7502,49 +7508,10 @@
</question>
<answer>
- <para>&os; have a feature to allow the display of
- <quote>splash</quote> screens during the boot messages. The
- splash screens currently must be a 256 color bitmap
- (<filename>*.BMP</filename>) or ZSoft PCX
- (<filename>*.PCX</filename>) file. In addition, they must
- have a resolution of 320x200 or less to work on standard VGA
- adapters. If you compile VESA support into your kernel,
- then you can use larger bitmaps up to 1024x768. The actual
- VESA support can either be compiled directly into the kernel
- with the <literal>VESA</literal> kernel config option or by
- loading the VESA kld module during bootup.</para>
-
- <para>To use a splash screen, you need to modify the startup
- files that control the boot process for &os;.</para>
-
- <para>You need to create a
- <filename>/boot/loader.rc</filename> file that contains the
- following lines:</para>
-
- <programlisting>include /boot/loader.4th
-start</programlisting>
-
- <para>and a <filename>/boot/loader.conf</filename> that
- contains the following:</para>
-
- <programlisting>splash_bmp_load="YES"
-bitmap_load="YES"</programlisting>
-
- <para>This assumes you are using
- <filename>/boot/splash.bmp</filename> for your splash
- screen. If you would rather use a PCX file, copy it to
- <filename>/boot/splash.pcx</filename>, create a
- <filename>/boot/loader.rc</filename> as instructed above,
- and create a <filename>/boot/loader.conf</filename> that
- contains:</para>
-
- <programlisting>splash_pcx_load="YES"
-bitmap_load="YES"
-bitmap_name="/boot/splash.pcx"</programlisting>
-
- <para>Now all you need is a splash screen. For that you can
- surf on over to the gallery at <ulink
- url="http://www.baldwin.cx/splash/"></ulink>.</para>
+ <para>The detailed answer for this question can be found in
+ the <ulink
+ url="&url.books.handbook;/boot-blocks.html#BOOT-SPLASH">Boot Time Splash Screens</ulink>
+ section of the &os; Handbook.</para>
</answer>
</qandaentry>
More information about the p4-projects
mailing list