PERFORCE change 149741 for review
Remko Lodder
remko at FreeBSD.org
Sun Sep 14 08:45:28 UTC 2008
http://perforce.freebsd.org/chv.cgi?CH=149741
Change 149741 by remko at remko_nakur on 2008/09/14 08:44:47
Somewhat more WIP.
Affected files ...
.. //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/handbook/ppp-and-slip/chapter.sgml#6 edit
Differences ...
==== //depot/projects/docproj_nl/nl_NL.ISO8859-1/books/handbook/ppp-and-slip/chapter.sgml#6 (text+ko) ====
@@ -271,7 +271,7 @@
regel. Deze nummers dienen alleen als hulp voor de
presentatie en discussie en zijn niet bedoeld om
daadwerkelijk in het echte bestand geplaatst te worden.
- Juiste identatie met tabs en spaties zijn ook
+ Juiste inspringing met tabs en spaties zijn ook
belangrijk.</para>
</note>
@@ -807,9 +807,9 @@
<primary>PPP shells</primary>
</indexterm>
- <para>Create a file called
- <filename>/etc/ppp/ppp-shell</filename> containing the
- following:</para>
+ <para>Creeër een bestand genaamd
+ <filename>/etc/ppp/ppp-shell</filename> welke de volgende
+ gegevens bevat:</para>
<programlisting>#!/bin/sh
IDENT=`echo $0 | sed -e 's/^.*-\(.*\)$/\1/'`
@@ -825,30 +825,32 @@
exec /usr/sbin/ppp -direct $IDENT</programlisting>
- <para>This script should be executable. Now make a symbolic
- link called <filename>ppp-dialup</filename> to this script
- using the following commands:</para>
+ <para>Dit script moet uitvoerbaar zijn. Ook moet er een
+ symbolische link gemaakt worden naar dit script met de naam
+ <filename>ppp-dialup</filename> door gebruik te maken van
+ de volgende commando's:</para>
<screen>&prompt.root; <userinput>ln -s ppp-shell /etc/ppp/ppp-dialup</userinput></screen>
- <para>You should use this script as the
- <emphasis>shell</emphasis> for all of your dialup users.
- This is an example from <filename>/etc/passwd</filename>
- for a dialup PPP user with username
- <username>pchilds</username> (remember do not directly edit
- the password file, use &man.vipw.8;).</para>
+ <para>U moet dit script gebruiken als de
+ <emphasis>schil</emphasis> voor al uw inbel gebruikers.
+ Dit is een voorbeeld uit <filename>/etc/passwd</filename>
+ voor een inbel PPP gebruiker met de gebrukersnaam
+ <username>pchilds</username> (onthoud dat u niet direct het
+ password bestand mag bewerken, gebruikt u daarom
+ &man.vipw.8;).</para>
<programlisting>pchilds:*:1011:300:Peter Childs PPP:/home/ppp:/etc/ppp/ppp-dialup</programlisting>
- <para>Create a <filename>/home/ppp</filename> directory that
- is world readable containing the following 0 byte
- files:</para>
+ <para>Creeër een <filename>/home/ppp</filename> directory
+ die beschreven kan worden door iedereen gelezen kan worden
+ en de volgende 0 byte grote bestanden bevat:</para>
<screen>-r--r--r-- 1 root wheel 0 May 27 02:23 .hushlogin
-r--r--r-- 1 root wheel 0 May 27 02:22 .rhosts</screen>
- <para>which prevents <filename>/etc/motd</filename> from being
- displayed.</para>
+ <para>wat voorkomt dat <filename>/etc/motd</filename> wordt
+ getoond.</para>
</sect4>
<sect4>
@@ -858,22 +860,24 @@
<primary>PPP shells</primary>
</indexterm>
- <para>Create the <filename>ppp-shell</filename> file as above,
- and for each account with statically assigned IPs create a
- symbolic link to <filename>ppp-shell</filename>.</para>
+ <para>Creeër het <filename>ppp-shell</filename> bestand
+ zoals hierboven, en voor elk account met een statisch
+ aangewezen IP adres creeër een symbolische link naar
+ <filename>ppp-shell</filename>.</para>
- <para>For example, if you have three dialup customers,
- <username>fred</username>, <username>sam</username>, and
- <username>mary</username>, that you route /24 CIDR networks
- for, you would type the following:</para>
+ <para>Als u bijvoorbeeld drie inbel gebruikers hebt genaamd
+ <username>fred</username>, <username>sam</username> en
+ <username>mary</username> waar u /24 CIDR netwerken voor
+ routeert, moet u het volgende typen:</para>
<screen>&prompt.root; <userinput>ln -s /etc/ppp/ppp-shell /etc/ppp/ppp-fred</userinput>
&prompt.root; <userinput>ln -s /etc/ppp/ppp-shell /etc/ppp/ppp-sam</userinput>
&prompt.root; <userinput>ln -s /etc/ppp/ppp-shell /etc/ppp/ppp-mary</userinput></screen>
- <para>Each of these users dialup accounts should have their
- shell set to the symbolic link created above (for example,
- <username>mary</username>'s shell should be
+ <para>Elk van deze inbel gebruiker accounts moet de shell
+ ingesteld hebben op de symbolische link die hierboven
+ is gecreeërd (bijvoorbeeld <username>mary</username>'s
+ shell moet zijn
<filename>/etc/ppp/ppp-mary</filename>).</para>
</sect4>
@@ -881,8 +885,8 @@
<title>Het instellen van <filename>ppp.conf</filename> voor
dynamische IP gebruikers</title>
- <para>The <filename>/etc/ppp/ppp.conf</filename> file should
- contain something along the lines of:</para>
+ <para>Het <filename>/etc/ppp/ppp.conf</filename> bestand moet
+ iets soortgelijks als hieronder bevatten:</para>
<programlisting>default:
set debug phase lcp chat
@@ -897,27 +901,28 @@
enable proxy</programlisting>
<note>
- <para>De indentie is belangrijk.</para>
+ <para>Het inspringen is belangrijk.</para>
</note>
- <para>The <literal>default:</literal> section is loaded for
- each session. For each dialup line enabled in
- <filename>/etc/ttys</filename> create an entry similar to
- the one for <literal>ttyd0:</literal> above. Each line
- should get a unique IP address from your pool of IP
- addresses for dynamic users.</para>
+ <para>De <literal>default:</literal> sectie wordt geladen
+ voor elke sectie. Voor elke inbel lijn die ingeschakeld
+ is in <filename>/etc/ttys</filename> moet een soortgelijke
+ regel worden gemaakt als die voor <literal>ttyd0:</literal>
+ hierboven. Elke regel moet een uniek IP adres krijgen van
+ uw pool van IP adressen voor dynamische gebruikers.</para>
</sect4>
<sect4>
<title>Het instellen van <filename>ppp.conf</filename> voor
statische IP gebruikers.</title>
- <para>Along with the contents of the sample
+ <para>Samen met de inhoud van het voorbeeld
<filename>/usr/share/examples/ppp/ppp.conf</filename>
- above you should add a section for each of the
- statically assigned dialup users. We will continue with
- our <username>fred</username>, <username>sam</username>,
- and <username>mary</username> example.</para>
+ bestand hierboven moet een sectie aangemaakt worden voor
+ elke van de statisch ingestelde inbel gebruikers. We
+ gaan door met ons <username>fred</username>,
+ <username>sam</username> en <username>mary</username>
+ voorbeeld.</para>
<programlisting>fred:
set ifaddr 203.14.100.1 203.14.101.1 255.255.255.255
@@ -928,11 +933,12 @@
mary:
set ifaddr 203.14.100.1 203.14.103.1 255.255.255.255</programlisting>
- <para>The file <filename>/etc/ppp/ppp.linkup</filename>
- should also contain routing information for each static
- IP user if required. The line below would add a route
- for the <hostid role="ipaddr">203.14.101.0/24</hostid>
- network via the client's ppp link.</para>
+ <para>Het <filename>/etc/ppp/ppp.linkup</filename> bestand
+ moet ook routerings informatie bevatten voor elke statische
+ IP gebruiker indien nodig. De regel hieronder zou een
+ routering toevoegen voor het
+ <hostid role="ipaddr">203.14.201.0/24</hostid> netwerk
+ via de gebruiker's ppp link.</para>
<programlisting>fred:
add 203.14.101.0 netmask 255.255.255.0 HISADDR
@@ -959,65 +965,67 @@
<primary>LCP</primary>
</indexterm>
- <para>Configuring and compiling <command>mgetty</command>
- with the <literal>AUTO_PPP</literal> option enabled
- allows <command>mgetty</command> to detect the LCP phase
- of PPP connections and automatically spawn off a ppp
- shell. However, since the default login/password
- sequence does not occur it is necessary to authenticate
- users using either PAP or CHAP.</para>
+ <para>Het configureren en compileren van
+ <command>mgetty</command> met de <literal>AUTO_PPP</literal>
+ optie ingeschakeld stelt <command>mgetty</command> in staat
+ om de LCP fase van PPP connecties te detecteren en daardoor
+ automatisch een ppp shell te creeëren. Echter omdat
+ de standaard login/wachtwoord procedure niet plaatsvind is
+ het nodig om de gebruikers te authenticeren door middel van
+ PAP of CHAP.</para>
- <para>This section assumes the user has successfully
- configured, compiled, and installed a version of
- <command>mgetty</command> with the
- <literal>AUTO_PPP</literal> option (v0.99beta or
- later).</para>
+ <para>Deze sectie gaat ervanuit dat de gebruiker succesvol
+ een versie van <command>mgetty</command> met de
+ <literal>AUTO_PPP</literal> optie (v0.99beta of
+ later) heeft geconfigureerd, gecompileerd en
+ geïnstalleerd.</para>
- <para>Make sure your
+ <para>Zorg ervoor dat uw
<filename>/usr/local/etc/mgetty+sendfax/login.config</filename>
- file has the following in it:</para>
+ bestand de volgende inhoud heeft:</para>
<programlisting>/AutoPPP/ - - /etc/ppp/ppp-pap-dialup</programlisting>
- <para>This will tell <command>mgetty</command> to run the
- <filename>ppp-pap-dialup</filename> script for detected
- PPP connections.</para>
+ <para>Dit verteld <command>mgetty</command> om het
+ <filename>ppp-pap-dialup</filename> script te starten
+ wanneer er PPP connecties gedetecteerd zijn.</para>
- <para>Create a file called
- <filename>/etc/ppp/ppp-pap-dialup</filename> containing the
- following (the file should be executable):</para>
+ <para>Creeër een bestand genaamd
+ <filename>/etc/ppp/ppp-pap-dialup</filename> met de volgende
+ inhoud (het bestand moet uitvoerbaar zijn):</para>
<programlisting>#!/bin/sh
exec /usr/sbin/ppp -direct pap$IDENT</programlisting>
- <para>For each dialup line enabled in
- <filename>/etc/ttys</filename>, create a corresponding entry
- in <filename>/etc/ppp/ppp.conf</filename>. This will
- happily co-exist with the definitions we created
- above.</para>
+ <para>Voor elke inbel regel die ingeschakeld is in
+ <filename>/etc/ttys</filename>, creeër een
+ corresponderende regel in
+ <filename>/etc/ppp/ppp.conf</filename>. Dit gaat goed
+ samen met de definities die hierboven gedaan zijn.</para>
<programlisting>pap:
enable pap
set ifaddr 203.14.100.1 203.14.100.20-203.14.100.40
enable proxy</programlisting>
- <para>Each user logging in with this method will need to have
- a username/password in
- <filename>/etc/ppp/ppp.secret</filename> file, or
- alternatively add the following option to authenticate users
- via PAP from the <filename>/etc/passwd</filename> file.</para>
+ <para>Elke gebruiker die op deze manier inlogged moet een
+ gebruikersnaam en wachtwoord hebben in het
+ <filename>/etc/ppp/ppp.secret</filename> bestand of de
+ volgende optie moet worden toegevoegd om gebruikers te
+ authenticeren via PAP vanuit het
+ <filename>/etc/passwd</filename> betand.</para>
<programlisting>enable passwdauth</programlisting>
- <para>If you wish to assign some users a static IP number,
- you can specify the number as the third argument in
- <filename>/etc/ppp/ppp.secret</filename>. See
+ <para>Als u een aantal gebruikers een statisch IP adres wilt
+ geven, kan dat gespecificeerd worden als het derde argument
+ in <filename>/etc/ppp/ppp.secret</filename>. Zie
<filename>/usr/share/examples/ppp/ppp.secret.sample</filename>
- for examples.</para>
+ voor voorbeelden.</para>
</sect4>
<sect4>
- <title>MS Extensies</title>
+ <title>µsoft; Extensies</title>
<indexterm>
<primary>DNS</primary>
@@ -1029,32 +1037,34 @@
<indexterm>
<primary>PPP</primary>
- <secondary>Microsoft extensions</secondary>
+ <secondary>µsoft; extensies</secondary>
</indexterm>
- <para>It is possible to configure PPP to supply DNS and
- NetBIOS nameserver addresses on demand.</para>
+ <para>Het is mogelijk om PPP dusdanig te configuren dat deze
+ DNS en NetBIOS naamserver adressen meegeeft.</para>
- <para>To enable these extensions with PPP version 1.x, the
- following lines might be added to the relevant section of
- <filename>/etc/ppp/ppp.conf</filename>.</para>
+ <para>Om deze extensies in te schakelen met PPP versie 1.x
+ kunnen de volgende regels toegevoegd worden aan de relevante
+ sectie in <filename>/etc/ppp/ppp.conf</filename>:</para>
<programlisting>enable msext
set ns 203.14.100.1 203.14.100.2
set nbns 203.14.100.5</programlisting>
- <para>And for PPP version 2 and above:</para>
+ <para>en voor PPP versie 2 en hoger:</para>
<programlisting>accept dns
set dns 203.14.100.1 203.14.100.2
set nbns 203.14.100.5</programlisting>
- <para>This will tell the clients the primary and secondary
- name server addresses, and a NetBIOS nameserver host.</para>
+ <para>Dit verteld de cliënt het primaire en secundaire
+ naam server adres, en geeft een NetBIOS naam server
+ adres.</para>
- <para>In version 2 and above, if the
- <literal>set dns</literal> line is omitted, PPP will use the
- values found in <filename>/etc/resolv.conf</filename>.</para>
+ <para>In versie 2 en hoger zal PPP gebruik maken van de
+ waarden die gevonden worden in
+ <filename>/etc/resolv.conf</filename> als de regel
+ <literal>set dns</literal> niet wordt gevonden.</para>
</sect4>
<sect4 id="userppp-PAPnCHAP">
@@ -1064,22 +1074,24 @@
<indexterm><primary>CHAP</primary></indexterm>
- <para>Some ISPs set their system up so that the authentication
- part of your connection is done using either of the PAP or
- CHAP authentication mechanisms. If this is the case, your ISP
- will not give a <prompt>login:</prompt> prompt when you
- connect, but will start talking PPP immediately.</para>
+ <para>Sommige ISP's stellen hun systemen dusdanig op zodat het
+ authenticatie gedeelte van uw verbinding wordt gedaan via
+ het PAP of CHAP authenticatie mechanisme. Als dit het geval
+ is zal uw ISP u geen <prompt>login:</prompt> prompt geven
+ wanneer u verbinding maakt, maar zal deze meteen PPP gaan
+ praten.</para>
- <para>PAP is less secure than CHAP, but security is not normally
- an issue here as passwords, although being sent as plain text
- with PAP, are being transmitted down a serial line only.
- There is not much room for crackers to
- <quote>eavesdrop</quote>.</para>
+ <para>PAP is minder veilig dan CHAP, maar beveiliging is meestal
+ geen probleem omdat wachtwoorden, ook al worden deze in platte
+ tekst verstuurd met PAP, alleen worden verstuurd via een
+ seriële lijn. Hier is maar weinig ruimte voor crackers
+ om stiekem mee te luisteren.</para>
- <para>Referring back to the <link linkend="userppp-staticIP">PPP
- and Static IP addresses</link> or <link
- linkend="userppp-dynamicIP">PPP and Dynamic IP addresses</link>
- sections, the following alterations must be made:</para>
+ <para>Terug verwijzende naar de <link
+ linkend="userppp-staticIP">PPP en statische IP adressen</link>
+ of <link
+ linkend="userppp-dynamicIP">PPP en dynamische IP adressen</link>
+ secties moeten de volgende aanpassingen gedaan worden:</para>
<programlisting>13 set authname <replaceable>MyUserName</replaceable>
14 set authkey <replaceable>MyPassword</replaceable>
@@ -1090,8 +1102,8 @@
<term>Regel 13:</term>
<listitem>
- <para>This line specifies your PAP/CHAP user name. You
- will need to insert the correct value for
+ <para>Deze regel specificeert uw PPP/CHAP gebruikersnaam.
+ U moet de juiste waardes invullen voor
<replaceable>MyUserName</replaceable>.</para>
</listitem>
</varlistentry>
@@ -1102,19 +1114,20 @@
<indexterm><primary>password</primary></indexterm>
<listitem>
- <para>This line specifies your PAP/CHAP password. You
- will need to insert the correct value for
- <replaceable>MyPassword</replaceable>. You may want to
- add an additional line, such as:</para>
+ <para>Deze regel specificeert uw PPP/CHAP wachtwoord.
+ U moet de juiste waarde invullen voor
+ <replaceable>MyPassword</replaceable>. Misschien wilt
+ u een extra regel toevoegen als:</para>
<programlisting>16 accept PAP</programlisting>
- <para>or</para>
+ <para>of</para>
<programlisting>16 accept CHAP</programlisting>
- <para>to make it obvious that this is the intention, but
- PAP and CHAP are both accepted by default.</para>
+ <para>om duidelijk te maken dat dit de intentie is,
+ maar zowel PAP als CHAP worden standaard allebei
+ geaccepteerd.</para>
</listitem>
</varlistentry>
@@ -1122,10 +1135,10 @@
<term>Regel 15:</term>
<listitem>
- <para>Your ISP will not normally require that you log into
- the server if you are using PAP or CHAP. You must
- therefore disable your <quote>set login</quote>
- string.</para>
+ <para>Uw ISP zal normaal gesprokken niet eisen dat u
+ op de server aanlogged als u gebruik maakt van PAP of
+ CHAP. Daarom moet u de <quote>set login</quote> regel
+ uitschakelen.</para>
</listitem>
</varlistentry>
</variablelist>
@@ -1135,23 +1148,24 @@
<title>Het aanpassen van uw <command>ppp</command> configuratie
terwijl deze in gebruik is</title>
- <para>It is possible to talk to the <command>ppp</command>
- program while it is running in the background, but only if a
- suitable diagnostic port has been set up. To do this, add the
- following line to your configuration:</para>
+ <para>Het is mogelijk om tegen het <command>ppp</command>
+ programma te praten terwijl het in gebruik is op de
+ achtergrond, maar alleen als er een geschikte diagnostische
+ poort ingesteld is. Om dit te doen moet de volgende regel
+ worden toegevoegd aan de configuratie:</para>
<programlisting>set server /var/run/ppp-tun<replaceable>%d</replaceable> DiagnosticPassword 0177</programlisting>
- <para>This will tell PPP to listen to the specified
- &unix; domain socket, asking clients for the specified
- password before allowing access. The
- <literal>%d</literal> in the name is replaced with the
- <devicename>tun</devicename> device number that is in
- use.</para>
+ <para>Dit vertelt PPP om te luisteren naar het gespecificeerde
+ &unix; domein socket, waarbij de cliënten gevraagd
+ worden om het gespecificeerde wachtwoord voordat toegang
+ verkregen kan worden. Het <literal>%d</literal> in de
+ naam wordt vervangen door het <devicename>tun</devicename>
+ apparaat nummer dat in gebruik is.</para>
- <para>Once a socket has been set up, the &man.pppctl.8;
- program may be used in scripts that wish to manipulate the
- running program.</para>
+ <para>Zodra een socket ingesteld is kan het &man.pppctl.8;
+ programma gebruikt worden in scripts die het draaiende
+ programma willen manipuleren.</para>
</sect4>
</sect3>
@@ -1164,25 +1178,27 @@
<secondary>NAT</secondary>
</indexterm>
- <para>PPP has ability to use internal NAT without kernel diverting
- capabilities. This functionality may be enabled by the following
- line in <filename>/etc/ppp/ppp.conf</filename>:</para>
+ <para>PPP heeft de mogelijkheid om interne NAT te geruiken zonder
+ dat de kernel hiervoor iets hoeft te doen. Deze functionaliteit
+ kan worden ingeschekd door de volgende regel in
+ <filename>/etc/ppp/ppp.conf</filename>:</para>
<programlisting>nat enable yes</programlisting>
- <para>Alternatively, PPP NAT may be enabled by command-line
- option <literal>-nat</literal>. There is also
- <filename>/etc/rc.conf</filename> knob named
- <literal>ppp_nat</literal>, which is enabled by default.</para>
+ <para>Ook kan PPP NAT ingeschakeld worden door de commando
+ regel optie <literal>-nat</literal>. Er is ook een
+ <filename>/etc/rc.conf</filename> optie genaamd
+ <literal>ppp_nat</literal> welke standaard ingeschakeld
+ is.</para>
- <para>If you use this feature, you may also find useful
- the following <filename>/etc/ppp/ppp.conf</filename> options
- to enable incoming connections forwarding:</para>
+ <para>Als u gebruik wilt maken van deze optie, kunt u de
+ volgende <filename>/etc/ppp/ppp.conf</filename> opties ook
+ nuttig vinden om inkomende connecties door te sturen:</para>
<programlisting>nat port tcp 10.0.0.2:ftp ftp
nat port tcp 10.0.0.2:http http</programlisting>
- <para>or do not trust the outside at all</para>
+ <para>of vertrouw niets vanaf de buitenkant:</para>
<programlisting>nat deny_incoming yes</programlisting>
</sect3>
@@ -1192,49 +1208,53 @@
<indexterm>
<primary>PPP</primary>
- <secondary>configuration</secondary>
+ <secondary>configuratie</secondary>
</indexterm>
- <para>You now have <command>ppp</command> configured, but there
- are a few more things to do before it is ready to work. They
- all involve editing the <filename>/etc/rc.conf</filename>
- file.</para>
+ <para>U heeft nu <command>ppp</command> geconfigurerd maar er
+ moeten nog een aantal dingen gedaan worden voordat het klaar
+ is om te kunnen werken. Deze betekenen allemaal dat het
+ <filename>/etc/rc.conf</filename> bestand bewerkt moet
+ worden.</para>
- <para>Working from the top down in this file, make sure the
- <literal>hostname=</literal> line is set, e.g.:</para>
+ <para>Werkende vanaf de bovenkant naar beneden in dit bestand
+ zorg ervoor dat de <literal>hostname=</literal> regel
+ ingesteld is met bijvoorbeeld:</para>
<programlisting>hostname="foo.example.com"</programlisting>
- <para>If your ISP has supplied you with a static IP address and
- name, it is probably best that you use this name as your host
- name.</para>
+ <para>Als uw ISP u een statisch adres en een naam heeft gegeven
+ is het waarschijnlijk slim dat u deze naam gebruikt als uw
+ host naam.</para>
- <para>Look for the <literal>network_interfaces</literal> variable.
- If you want to configure your system to dial your ISP on demand,
- make sure the <devicename>tun0</devicename> device is added to
- the list, otherwise remove it.</para>
+ <para>Zoek naar de <literal>network_interfaces</literal>
+ variabele. Als u uw systeem wilt configuren om in te bellen
+ bij uw ISP wanneer nodig, zorg er dan voor dat het
+ <devicename>tun0</devicename> apparaat is toegevoegd aan deze
+ lijst. Haal deze anders weg.</para>
<programlisting>network_interfaces="lo0 tun0"
ifconfig_tun0=</programlisting>
<note>
- <para>The <literal>ifconfig_tun0</literal> variable should be
- empty, and a file called
- <filename>/etc/start_if.tun0</filename> should be created.
- This file should contain the line:</para>
+ <para>De <literal>ifconfig_tun0</literal> variabele moet
+ leeg zijn, en een bestand genaamd
+ <filename>/etc/start_if.tun0</filename> moet aangemaakt
+ worden met de volgende inhoud:</para>
<programlisting>ppp -auto mysystem</programlisting>
- <para>This script is executed at network configuration time,
- starting your ppp daemon in automatic mode. If you have a LAN
- for which this machine is a gateway, you may also wish to use
- the <option>-alias</option> switch. Refer to the manual page
- for further details.</para>
+ <para>Dit script wordt uitgevoerd tijdens de netwerk
+ configuratie, waarbij uw ppp daemon wordt gestart in
+ automatische mode. Als u een LAN heeft waarvoor deze
+ machine een gateway is wilt u wellicht ook de
+ <option>-alias</option> meegeven. Bekijk de handleiding
+ voor verdere details.</para>
</note>
- <para>Make sure that the router program is set to
- <literal>NO</literal> with the following line in your
- <filename>/etc/rc.conf</filename>:</para>
+ <para>Zorg ervoor dat het router programma is ingesteld op
+ <literal>NO</literal> door middel van de volgende regel in
+ uw <filename>/etc/rc.conf</filename>:</para>
<programlisting>router_enable="NO"</programlisting>
@@ -1242,16 +1262,17 @@
<primary><application>routed</application></primary>
</indexterm>
- <para>It is important that the <command>routed</command> daemon is
- not started, as <command>routed</command> tends to delete the default
- routing table entries created by <command>ppp</command>.</para>
+ <para>Het is belangrijk dat de <command>routed</command> daemon
+ niet gestart wordt, omdat <command>routed</command> de neiging
+ heeft om de standaard routerings tabel regels die gemaakt
+ worden door <command>ppp</command> te verwijderen.</para>
- <para>It is probably a good idea to ensure that the
- <literal>sendmail_flags</literal> line does not include the
- <option>-q</option> option, otherwise
- <command>sendmail</command> will attempt to do a network lookup
- every now and then, possibly causing your machine to dial out.
- You may try:</para>
+ <para>Het is waarschijnlijk een goed idee om te zorgen dat de
+ <literal>sendmail_flags</literal> regel de <option>-q</option>
+ niet wordt meegenomen, anders zal <command>sendmail</command>
+ een netwerk zoek opdracht doen perdiodiek wat kan zorgen dat
+ uw machine gaat uitbellen. U kunt het volgende
+ proberen:</para>
<programlisting>sendmail_flags="-bd"</programlisting>
@@ -1259,14 +1280,16 @@
<primary><application>sendmail</application></primary>
</indexterm>
- <para>The downside of this is that you must force
- <command>sendmail</command> to re-examine the mail queue
- whenever the ppp link is up by typing:</para>
+ <para>De keerzijde hiervan is dat u <command>sendmail</command>
+ moet forceren om de mail queue periodiek te bekijken zodra
+ de ppp link op is door het typen van:</para>
<screen>&prompt.root; <userinput>/usr/sbin/sendmail -q</userinput></screen>
- <para>You may wish to use the <command>!bg</command> command in
- <filename>ppp.linkup</filename> to do this automatically:</para>
+ <para>U wilt wellicht gebruik maken van het
+ <command>!bg</command> commando in
+ <filename>ppp.linkup</filename> om dit automatisch te
+ doen:</para>
<programlisting>1 provider:
2 delete ALL
@@ -1277,20 +1300,22 @@
<primary>SMTP</primary>
</indexterm>
- <para>If you do not like this, it is possible to set up a
- <quote>dfilter</quote> to block SMTP traffic. Refer to the
- sample files for further details.</para>
+ <para>Als u dit niet wilt doen, is het mogelijk om een
+ <quote>dfiler</quote> in te stellen welke SMTP verkeer
+ blokkeert. Refereer naar de voorbeeld bestanden voor
+ verdere details.</para>
- <para>All that is left is to reboot the machine. After rebooting,
- you can now either type:</para>
+ <para>Alles wat nu nog nodig is, is het herstarten van de
+ machine. Na het herstarten kunt het volgende typen:</para>
<screen>&prompt.root; <userinput>ppp</userinput></screen>
- <para>and then <command>dial provider</command> to start the PPP
- session, or, if you want <command>ppp</command> to establish
- sessions automatically when there is outbound traffic (and
- you have not created the <filename>start_if.tun0</filename>
- script), type:</para>
+ <para>en daarna <command>dial provider</command> om de PPP
+ sessie te starten, of u indien u dat wilt kan
+ <command>ppp</command> automatisch sessies opzetten wanneer
+ er uitgaand verkeer is (en wanneer u geen
+ <filename>start_if.tun0</filename> script heeft aangemaakt,
+ typt u:</para>
<screen>&prompt.root; <userinput>ppp -auto provider</userinput></screen>
</sect3>
@@ -1298,88 +1323,90 @@
<sect3>
<title>Samenvatting</title>
- <para>To recap, the following steps are necessary when setting up
- ppp for the first time:</para>
+ <para>Om samen te vatten, de volgende stappen zijn benodigd om
+ PPP voor de eerste keer in te stellen:</para>
- <para>Client side:</para>
+ <para>Aan de cliënt zijde:</para>
<procedure>
<step>
- <para>Ensure that the <devicename>tun</devicename> device is
- built into your kernel.</para>
+ <para>Zorg ervoor dat het <devicename>tun</devicename>
+ apparaat is ingebakken in uw kernel.</para>
</step>
<step>
- <para>Ensure that the
- <filename>tun<replaceable>N</replaceable></filename> device
- file is available in the <filename>/dev</filename>
- directory.</para>
+ <para>Zorg ervoor dat het
+ <filename>tun<replaceable>N</replaceable></filename>
+ apparaat bestand beschikbaar is in de
+ <filename>/dev</filename> directory.</para>
</step>
<step>
- <para>Create an entry in
- <filename>/etc/ppp/ppp.conf</filename>. The
- <filename>pmdemand</filename> example should suffice for
- most ISPs.</para>
+ <para>Creeër een regel in
+ <filename>/etc/ppp/ppp.conf</filename>. Het
+ <filename>pmdemand</filename> voorbeeld zou moeten
+ volstaand voor de meeste ISPs.</para>
</step>
<step>
- <para>If you have a dynamic IP address, create an entry in
- <filename>/etc/ppp/ppp.linkup</filename>.</para>
+ <para>Als u dynamische IP adressen heeft, creeër een
+ regel in <filename>/etc/ppp/ppp.linkup</filename>.</para>
</step>
<step>
- <para>Update your <filename>/etc/rc.conf</filename>
- file.</para>
+ <para>Update uw <filename>/etc/rc.conf</filename>
+ bestand.</para>
</step>
<step>
- <para>Create a <filename>start_if.tun0</filename> script if
- you require demand dialing.</para>
+ <para>Creeër een <filename>start_if.tun0</filename>
+ script als u ondemand wilt inbellen.</para>
</step>
</procedure>
- <para>Server side:</para>
+ <para>Aan de server zijde:</para>
<procedure>
<step>
- <para>Ensure that the <devicename>tun</devicename> device is
- built into your kernel.</para>
+ <para>Zorg ervoor dat het <devicename>tun</devicename>
+ apparaat is ingebakken in uw kernel.</para>
</step>
<step>
- <para>Ensure that the
- <filename>tun<replaceable>N</replaceable></filename> device
- file is available in the <filename>/dev</filename>
- directory.</para>
+ <para>Zorg ervoor dat het
+ <filename>tun<replaceable>N</replaceable></filename>
+ apparaat bestand beschikbaar is in de
+ <filename>/dev</filename> directory.</para>
</step>
<step>
- <para>Create an entry in <filename>/etc/passwd</filename>
- (using the &man.vipw.8; program).</para>
+ <para>Creeër een regel in
+ <filename>/etc/passwd</filename> (door gebruik te maken
+ van het &man.vipw.8; programma).</para>
</step>
<step>
- <para>Create a profile in this users home directory that runs
- <command>ppp -direct direct-server</command> or
- similar.</para>
+ <para>Creeër een profiel in deze gebruikers' home
+ directory die
+ <command>ppp -direct direct-server</command> start of
+ iets soortgelijks.</para>
</step>
<step>
- <para>Create an entry in
- <filename>/etc/ppp/ppp.conf</filename>. The
- <filename>direct-server</filename> example should
- suffice.</para>
+ <para>Creeër een regel in
+ <filename>/etc/ppp/ppp.conf</filename>. Het
+ <filename>direct-server</filename> voorbeeld zou moeten
+ volstaan.</para>
</step>
<step>
- <para>Create an entry in
+ <para>Creeër een regel in
<filename>/etc/ppp/ppp.linkup</filename>.</para>
</step>
<step>
- <para>Update your <filename>/etc/rc.conf</filename>
- file.</para>
+ <para>Update uw <filename>/etc/rc.conf</filename>
+ bestand.</para>
</step>
</procedure>
</sect3>
@@ -1411,18 +1438,19 @@
<secondary>kernel PPP</secondary>
</indexterm>
- <para>Before you start setting up PPP on your machine, make sure
- that <command>pppd</command> is located in
- <filename>/usr/sbin</filename> and the directory
- <filename>/etc/ppp</filename> exists.</para>
+ <para>Voordat u begint met het opzetten van PPP op uw machine,
+ zorg ervoor dat het <command>pppd</command> commando zich
+ bevind in de <filename>/usr/sbin</filename> directory en dat
+ de directory <filename>/etc/ppp</filename> bestaat.</para>
- <para><command>pppd</command> can work in two modes:</para>
+ <para><command>pppd</command> kan in twee verschillende modes
+ werken:</para>
<orderedlist>
<listitem>
- <para>As a <quote>client</quote> — you want to connect your
- machine to the outside world via a PPP serial connection or
- modem line.</para>
+ <para>Als een <quote>cliënt</quote> — u wilt uw
+ machine verbinden met de buitenwereld via een seriële
+ PPP verbinding of een modem lijn.</para>
</listitem>
<indexterm>
@@ -1431,20 +1459,21 @@
</indexterm>
<listitem>
- <para>As a <quote>server</quote> — your machine is located on
- the network, and is used to connect other computers using
- PPP.</para>
+ <para>Als een <quote>server</quote> — uw machine bevind
+ zich in het netwerk en wordt gebruikt om andere computers
+ te verbinden door middel van PPP.</para>
</listitem>
</orderedlist>
- <para>In both cases you will need to set up an options file
- (<filename>/etc/ppp/options</filename> or
- <filename>~/.ppprc</filename> if you have more than one user on
- your machine that uses PPP).</para>
+ <para>In beide gevallen moet u een bestand met opties instellen
+ (<filename>/etc/ppp/options</filename> of
+ <filename>~/.ppprc</filename> als er meer dan één
+ gebruiker is op uw machine die gebruik maakt van PPP).</para>
- <para>You will also need some modem/serial software (preferably
- <filename role="package">comms/kermit</filename>), so you can dial and
- establish a connection with the remote host.</para>
+ <para>U heeft ook enige modem/seriële software nodig
+ (<filename role="package">comms/kermit</filename> wordt
+ aanbevolen), zodat u de andere kant kunt bellen en een
+ verbinding kunt opzetten.</para>
</sect2>
<sect2>
@@ -1471,26 +1500,29 @@
<primary>Cisco</primary>
</indexterm>
- <para>The following <filename>/etc/ppp/options</filename> might be
- used to connect to a Cisco terminal server PPP line.</para>
+ <para>De volgende <filename>/etc/ppp/options</filename> kan
+ gebruikt worden om met een Cisco terminal server PPP lijn
+ verbinding te maken.</para>
- <programlisting>crtscts # enable hardware flow control
-modem # modem control line
-noipdefault # remote PPP server must supply your IP address
- # if the remote host does not send your IP during IPCP
- # negotiation, remove this option
-passive # wait for LCP packets
-domain ppp.foo.com # put your domain name here
+ <programlisting>crtscts # Schakel hardware flow controle in
+modem # modem controle lijn
+noipdefault # De PPP server aan de andere kant moet uw IP adres
+ # opgeven, als de machine aan de andere kant uw IP
+ # adres niet meegeeft tijdens de IPCP onderhandeling
+ # moet deze optie worden verwijderd
+passive # Wacht op LCP pakketten
+domain ppp.foo.com # Vul uw domein naam hier in
-:<replaceable>remote_ip</replaceable> # put the IP of remote PPP host here
- # it will be used to route packets via PPP link
- # if you didn't specified the noipdefault option
- # change this line to <replaceable>local_ip</replaceable>:<replaceable>remote_ip</replaceable>
+:<replaceable>remote_ip</replaceable> # Vul het IP adres van de PPP server in
+ # deze wordt gebruikt om pakketten te routeren via de
+ # PPP link. Als u de noipdefault optie niet heeft
+ # gespecificeerd verander dan deze regel in
+ # <replaceable>local_ip</replaceable>:<replaceable>remote_ip</replaceable>
-defaultroute # put this if you want that PPP server will be your
- # default router</programlisting>
+defaultroute # Vul dit in als u wilt dat de PPP server de standaard
+ # router wordt</programlisting>
- <para>To connect:</para>
+ <para>Om verbinding te maken:</para>
<indexterm><primary>Kermit</primary></indexterm>
@@ -1498,33 +1530,36 @@
<procedure>
<step>
- <para>Dial to the remote host using
- <application>Kermit</application> (or some other modem
- program), and enter your user name and password (or whatever
- is needed to enable PPP on the remote host).</para>
+ <para>Bel naar de machine aan de andere kant door middel van
+ <application>Kermit</application> (of een ander modem
+ programma), en vul uw gebruikersnaam en wachtwoord in (of
+ wat er ook nodig is om de verbinding op te brengen met de
+ machine aan de andere kant).</para>
</step>
<step>
- <para>Exit <application>Kermit</application> (without
- hanging up the line).</para>
+ <para>Stop <application>Kermit</application> (zonder de lijn
+ op te hangen).</para>
</step>
<step>
- <para>Enter the following:</para>
+ <para>Type het volgende:</para>
<screen>&prompt.root; <userinput>/usr/src/usr.sbin/pppd.new/pppd <replaceable>/dev/tty01</replaceable> <replaceable>19200</replaceable></userinput></screen>
- <para>Be sure to use the appropriate speed and device name.</para>
+ <para>Wees er zeker van dat de juiste snelheid en het juiste
+ apparaat worden aangesproken.</para>
</step>
</procedure>
- <para>Now your computer is connected with PPP. If the connection
- fails, you can add the <option>debug</option> option to the
- <filename>/etc/ppp/options</filename> file, and check console messages
- to track the problem.</para>
+ <para>Uw computer is nu verbonden met PPP. Als de connectie
+ faalt, kan de <option>debug</option> optie worden meegegeven
+ in het <filename>/etc/ppp/options</filename> bestand waarna
+ de console berichten kunnen worden geraadpleegd om het probleem
+ te achterhalen.</para>
- <para>Following <filename>/etc/ppp/pppup</filename> script will make
- all 3 stages automatic:</para>
+ <para>Het volgende <filename>/etc/ppp/pppup</filename> script
+ zal alle 3 de stappen automatisch doen:</para>
<programlisting>#!/bin/sh
pgrep -l pppd
@@ -1550,13 +1585,14 @@
<primary>Kermit</primary>
</indexterm>
- <para><filename>/etc/ppp/kermit.dial</filename> is a
- <application>Kermit</application> script that dials and makes all
- necessary authorization on the remote host (an example of such a
- script is attached to the end of this document).</para>
+ <para><filename>/etc/ppp/kermit.dial</filename> is een
+ <application>Kermit</application> script dat belt en alle
+ benodigde authorizaties doet op de machine aan de andere
+ kant (een voorbeeld van zo'n script is bijgevoegd op het
+ einde van dit document).</para>
- <para>Use the following <filename>/etc/ppp/pppdown</filename> script
- to disconnect the PPP line:</para>
+ <para>Gebruik het volgende <filename>/etc/ppp/pppdown</filename>
+ script om de PPP lijn af te breken:</para>
<programlisting>#!/bin/sh
pid=`pgrep pppd`
@@ -1577,9 +1613,9 @@
kermit -y /etc/ppp/kermit.hup
/etc/ppp/ppptest</programlisting>
- <para>Check to see if <command>pppd</command> is still running by
- executing <filename>/usr/etc/ppp/ppptest</filename>, which should look
- like this:</para>
+ <para>Controleer of <command>pppd</command> nog steeds draait door
+ het uitvoeren van <filename>/usr/etc/ppp/ppptest</filename>,
+ welke er als volgend uitziet:</para>
<programlisting>#!/bin/sh
pid=`pgrep pppd`
@@ -1592,9 +1628,9 @@
netstat -n -I ppp0
ifconfig ppp0</programlisting>
- <para>To hang up the modem, execute
- <filename>/etc/ppp/kermit.hup</filename>, which should
- contain:</para>
+ <para>Om de modem op te hangen, voer het
+ <filename>/etc/ppp/kermit.hup</filename> script uit
+ welke het volgende bevat:</para>
<programlisting>set line /dev/tty01 ; put your modem device here
>>> TRUNCATED FOR MAIL (1000 lines) <<<
More information about the p4-projects
mailing list