PERFORCE change 137940 for review
Gabor Pali
pgj at FreeBSD.org
Mon Mar 17 19:21:43 UTC 2008
http://perforce.freebsd.org/chv.cgi?CH=137940
Change 137940 by pgj at disznohal on 2008/03/17 19:20:48
Add initial Hungarian translation of Chapter 25: PPP and SLIP.
Affected files ...
.. //depot/projects/docproj_hu/books/handbook/ppp-and-slip/chapter.sgml#3 edit
Differences ...
==== //depot/projects/docproj_hu/books/handbook/ppp-and-slip/chapter.sgml#3 (text+ko) ====
@@ -4,22 +4,27 @@
$FreeBSD: doc/en_US.ISO8859-1/books/handbook/ppp-and-slip/chapter.sgml,v 1.177 2008/02/03 23:12:02 ceri Exp $
-->
+<!-- The FreeBSD Hungarian Documentation Project
+ Translated by: PALI, Gabor <pgj at FreeBSD.org>
+ Original Revision: 1.177 -->
+
<chapter id="ppp-and-slip">
<chapterinfo>
<authorgroup>
<author>
<firstname>Jim</firstname>
<surname>Mock</surname>
- <contrib>Restructured, reorganized, and updated by </contrib>
- <!-- 1 Mar 2000 -->
+ <contrib>Újjászervezte, újrarendezte
+ és frissítette: </contrib>
</author>
</authorgroup>
</chapterinfo>
- <title>PPP and SLIP</title>
+ <title>A PPP és a SLIP</title>
<sect1 id="ppp-and-slip-synopsis">
- <title>Synopsis</title>
+ <title>Áttekintés</title>
+
<indexterm id="ppp-ppp">
<primary>PPP</primary>
</indexterm>
@@ -27,141 +32,174 @@
<primary>SLIP</primary>
</indexterm>
- <para>FreeBSD has a number of ways to link one computer to
- another. To establish a network or Internet connection through a
- dial-up modem, or to allow others to do so through you, requires
- the use of PPP or SLIP. This chapter describes setting up
- these modem-based communication services in detail.</para>
+ <para>A &os; számos módon képes
+ összekötni két
+ számítógépet. Ha
+ betárcsázós modemmel akarunk
+ hálózati vagy internetes kapcsolatot
+ felépíteni, esetleg azt szeretnénk, hogy
+ mások képesek legyenek minket ilyen módon
+ elérni, akkor ahhoz PPP-t ill. SLIP-et kell
+ használnunk. Ebben a fejezetben a modemes
+ kommunikáció beállításait
+ mutatjuk be részletesebben.</para>
- <para>After reading this chapter, you will know:</para>
+ <para>A fejezet elolvasása során
+ megismerjük:</para>
<itemizedlist>
<listitem>
- <para>How to set up user PPP.</para>
+ <para>hogyan állítsunk be
+ felhasználói PPP-t</para>
</listitem>
<listitem>
- <para>How to set up kernel PPP.</para>
+ <para>hogyan állítsunk be rendszerszintû
+ PPP-t</para>
</listitem>
<listitem>
- <para>How to set up <acronym>PPPoE</acronym> (PPP over
- Ethernet).</para>
+ <para>hogyan állítsunk be egy
+ <acronym>PPPoE</acronym> (PPP over Ethernet, vagyis <quote>PPP
+ Ethernet felett</quote>) kapcsolatot</para>
</listitem>
<listitem>
- <para>How to set up <acronym>PPPoA</acronym> (PPP over
- ATM).</para>
+ <para>hogyan állítsunk be egy
+ <acronym>PPPoA</acronym> (PPP over ATM, vagyis <quote>PPP ATM
+ felett</quote>) kapcsolatot</para>
</listitem>
<listitem>
- <para>How to configure and set up a SLIP client and
- server.</para>
+ <para>hogyan állítsunk be SLIP klienst és
+ szervert</para>
</listitem>
</itemizedlist>
<indexterm id="ppp-ppp-user">
<primary>PPP</primary>
- <secondary>user PPP</secondary>
- </indexterm>
+ <secondary>felhasználói PPP</secondary>
+ </indexterm>
<indexterm id="ppp-ppp-kernel">
<primary>PPP</primary>
- <secondary>kernel PPP</secondary>
- </indexterm>
+ <secondary>rendszer PPP</secondary>
+ </indexterm>
<indexterm id="ppp-ppp-ethernet">
<primary>PPP</primary>
- <secondary>over Ethernet</secondary>
+ <secondary>Ethernet felett</secondary>
</indexterm>
- <para>Before reading this chapter, you should:</para>
+ <para>A fejezet elolvasásához ajánlott:</para>
<itemizedlist>
<listitem>
- <para>Be familiar with basic network terminology.</para>
+ <para>az alapvetõ hálózati
+ technológiák ismerete</para>
</listitem>
<listitem>
- <para>Understand the basics and purpose of a dialup connection
- and PPP and/or SLIP.</para>
+ <para>a betárcsázós kapcsolatok, a PPP
+ és/vagy SLIP alapjainak és céljainak
+ megértése</para>
</listitem>
</itemizedlist>
- <para>You may be wondering what the main difference is between user
- PPP and kernel PPP. The answer is simple: user PPP processes the
- inbound and outbound data in userland rather than in the kernel.
- This is expensive in terms of copying the data between the kernel
- and userland, but allows a far more feature-rich PPP implementation.
- User PPP uses the <devicename>tun</devicename> device to communicate
- with the outside world whereas kernel PPP uses the
- <devicename>ppp</devicename> device.</para>
+ <para>Talán érdekli a kedves olvasót, hogy mi
+ az alapvetõ különbség a
+ felhasználói és a rendszerszintû PPP
+ között. A válasz egyszerû: a
+ felhasználói PPP a beérkezõ és
+ kimenõ adatokat nem a rendszermagban, hanem a
+ felhasználói szinten dolgozza fel. Ez
+ költséges abból a szempontból, hogy
+ emiatt adatokat kell másolgatni a rendszer és a
+ felhasználói szint között, azonban egy
+ sokkal többet tudó PPP implementációnak
+ ad ezzel utat. A felhasználói PPP a
+ <devicename>tun</devicename> eszközön keresztül
+ kommunikál a külvilággal, miközben a
+ rendszermagban található PPP mindezt a
+ <devicename>ppp</devicename> eszközzel
+ valósítja meg.</para>
<note>
- <para>Throughout in this chapter, user PPP will simply be
- referred to as <application>ppp</application> unless a distinction needs to be made between it
- and any other PPP software such as <application>pppd</application>.
- Unless otherwise stated, all of the commands explained in this
- chapter should be executed as <username>root</username>.</para>
+ <para>A fejezetben a felhasználói PPP-t
+ egyszerûen csak <application>ppp</application> néven
+ fogjuk hivatkozni, hacsak nem lesz szükséges
+ különbséget tennünk közte és
+ más PPP szoftverek, mint mondjuk a
+ <application>pppd</application> között. Ha
+ mást nem mondunk, akkor a fejezetben ismertetett
+ összes parancsot <username>root</username>
+ felhasználóként kell kiadni.</para>
</note>
+
</sect1>
<sect1 id="userppp">
<sect1info>
<authorgroup>
- <author>
- <firstname>Tom</firstname>
- <surname>Rhodes</surname>
- <contrib>Updated and enhanced by </contrib>
- </author>
+ <author>
+ <firstname>Tom</firstname>
+ <surname>Rhodes</surname>
+ <contrib>Frissítette és feljavította:
+ </contrib>
+ </author>
</authorgroup>
<authorgroup>
- <author>
- <firstname>Brian</firstname>
- <surname>Somers</surname>
- <contrib>Originally contributed by </contrib>
- </author>
+ <author>
+ <firstname>Brian</firstname>
+ <surname>Somers</surname>
+ <contrib>Eredetileg készítette: </contrib>
+ </author>
</authorgroup>
<authorgroup>
<author>
<firstname>Nik</firstname>
<surname>Clayton</surname>
- <contrib>With input from </contrib>
- </author>
- <author>
+ <contrib>A bemenetet szolgáltatta: </contrib>
+ </author>
+ <author>
<firstname>Dirk</firstname>
- <surname>Frömberg</surname>
- </author>
- <author>
- <firstname>Peter</firstname>
- <surname>Childs</surname>
- </author>
+ <surname>Frömberg</surname>
+ </author>
+ <author>
+ <firstname>Peter</firstname>
+ <surname>Childs</surname>
+ </author>
</authorgroup>
</sect1info>
- <title>Using User PPP</title>
+ <title>A felhasználói PPP alkalmazása</title>
<sect2>
- <title>User PPP</title>
+ <title>A felhasználói PPP</title>
<sect3>
- <title>Assumptions</title>
+ <title>Elõfeltételek</title>
- <para>This document assumes you have the following:</para>
+ <para>A leírás feltételezi, hogy
+ rendelkezünk a következõkkel:</para>
<itemizedlist>
<indexterm id="ppp-isp">
- <primary>ISP</primary>
+ <primary>internet szolgáltató</primary>
</indexterm>
<indexterm id="ppp-ppp2">
- <primary>PPP</primary>
+ <primary>PPP kapcsolat</primary>
</indexterm>
+
<listitem>
- <para>An account with an Internet Service Provider (ISP) which
- you connect to using PPP.</para>
+ <para>olyan internet elõfizetés, ahol PPP-n
+ keresztül csatlakozunk</para>
</listitem>
<listitem>
- <para>You have a modem or
- other device connected to your system and configured
- correctly which allows you to connect to your ISP.</para>
+ <para>egy modem vagy más olyan
+ rendszerünkhöz csatlakozó eszköz, amin
+ keresztül el tudjuk érni az internet
+ szolgáltatónkat</para>
</listitem>
<listitem>
- <para>The dial-up number(s) of your ISP.</para>
+ <para>az internet elõfizetés
+ betárcsázáshoz szükséges
+ telefonszáma(i)</para>
</listitem>
<indexterm id="ppp-pap">
@@ -174,108 +212,161 @@
<primary>UNIX</primary>
</indexterm>
<indexterm id="ppp-login">
- <primary>login name</primary>
+ <primary>bejelentkezési név</primary>
</indexterm>
<indexterm id="ppp-password">
- <primary>password</primary>
+ <primary>jelszó</primary>
</indexterm>
+
<listitem>
- <para>Your login name and password. (Either a
- regular &unix; style login and password pair, or a PAP or CHAP
- login and password pair.)</para>
+ <para>A bejelentkezési nevünk és
+ jelszavunk. (Vagy a megszokott &unix;-os
+ felhasználói név és
+ jelszó páros, vagy egy PAP esetleg CHAP
+ bejelentkezési név és
+ jelszó.)</para>
</listitem>
<indexterm id="ppp-nameserver">
- <primary>nameserver</primary>
+ <primary>névszerver</primary>
</indexterm>
+
<listitem>
- <para>The IP address of one or more name servers.
- Normally, you will be given two IP addresses by your ISP to
- use for this. If they have not given you at least one, then
- you can use the <command>enable dns</command> command in
- <filename>ppp.conf</filename> and
- <application>ppp</application> will set the name servers for
- you. This feature depends on your ISPs PPP implementation
- supporting DNS negotiation.</para>
+ <para>Egy vagy több névszerver IP-címe.
+ Ehhez az internet szolgáltatók
+ általában két IP-címet adnak
+ meg. Ha egyet sem kaptunk, akkor a
+ <filename>ppp.conf</filename> állományban
+ erre a célra használhatjuk a <command>enable
+ dns</command> parancsot, és ekkor a
+ <application>ppp</application> majd automatikusan be fogja
+ állítani nekünk a
+ névszervereket. Ezt a lehetõséget az
+ befolyásolja, hogy az internet
+ szolgáltató oldalán
+ mûködõ PPP implementáció
+ támogatja-e a névfeloldás
+ egyeztetését (DNS negotiation).</para>
</listitem>
</itemizedlist>
- <para>The following information may be supplied by your ISP, but
- is not completely necessary:</para>
+ <para>A következõ információkat is
+ megkaphatjuk az internet elõfizetésünkhöz,
+ de nem feltétlenül szükségesek:</para>
<itemizedlist>
<listitem>
- <para>The IP address of your ISP's gateway. The gateway is
- the machine to which you will connect and will be set up as
- your <emphasis>default route</emphasis>. If you do not have
- this information, we can make one up and your ISP's PPP
- server will tell us the correct value when we connect.</para>
+ <para>Az internet szolgáltató
+ átjárójának IP-címe. Az
+ átjáró az a gép, amin
+ keresztül a gépünk csatlakozik és
+ számára az lesz az
+ <emphasis>alapértelmezett
+ átjáró</emphasis>. Ha nem
+ rendelkezünk ezzel az információval,
+ akkor csak állítsunk be valamit, és
+ majd a csatlakozáskor a szolgáltató
+ PPP szervere felülírja a megfelelõ
+ beállításokkal.</para>
- <para>This IP number is referred to as
- <literal>HISADDR</literal> by
- <application>ppp</application>.</para>
+ <para>Erre a címre a <application>ppp</application>
+ <literal>HISADDR</literal> néven hivatkozik.</para>
</listitem>
<listitem>
- <para>The netmask you should use. If your ISP has not
- provided you with one, you can safely use <hostid
- role="netmask">255.255.255.255</hostid>.</para>
+ <para>A használandó hálózati
+ maszk. Amennyiben a szolgáltató ezt nem adta
+ meg, nyugodtan használjuk erre a <hostid
+ role="netmask">255.255.255.255</hostid>
+ értéket.</para>
</listitem>
<indexterm id="ppp-static-ip">
- <primary>static IP address</primary>
+ <primary>statikus IP-cím</primary>
</indexterm>
+
<listitem>
- <para>If your ISP provides you with a static IP address and
- hostname, you can enter it. Otherwise, we simply let the
- peer assign whatever IP address it sees fit.</para>
+ <para>Ha a szolgáltatónk statikus
+ IP-címet és rögzített
+ hálózati nevet is biztosít nekünk,
+ ezt is megadhatjuk. Minden más esetben
+ egyszerûen csak hagyjuk, hogy a rendszer
+ automatikusan válasszon nekünk egyet.</para>
</listitem>
</itemizedlist>
- <para>If you do not have any of the required information, contact
- your ISP.</para>
+ <para>Ha a szükséges információknak
+ nem vagyunk birtokában, akkor vegyük fel a
+ kapcsolatot az internet szolgáltatókkal.</para>
<note>
- <para>Throughout this section, many of the examples showing
- the contents of configuration files are numbered by line.
- These numbers serve to aid in the presentation and
- discussion only and are not meant to be placed in the actual
- file. Proper indentation with tab and space characters is
- also important.</para>
+ <para>Ebben a szakaszban a példákban
+ szereplõ konfigurációs
+ állományok sorait számozva
+ láthatjuk. Ezek a sorszámok a bemutatás
+ és a tárgyalás
+ megkönnyítése érdekében
+ szerepelnek, és nem az eredeti
+ állományok részei. Mindezek mellett a
+ tabulátorok és szóközök
+ megfelelõ használata is fontos.</para>
</note>
</sect3>
<sect3>
- <title>Automatic <application>PPP</application> Configuration</title>
+ <title>A <application>PPP</application> automatikus
+ beállítása</title>
+
+ <indexterm>
+ <primary>PPP</primary>
+ <secondary>beállítása</secondary>
+ </indexterm>
- <indexterm><primary>PPP</primary><secondary>configuration</secondary></indexterm>
- <para>Both <command>ppp</command> and <command>pppd</command>
- (the kernel level implementation of PPP) use the configuration
- files located in the <filename>/etc/ppp</filename> directory.
- Examples for user ppp can be found in
- <filename>/usr/share/examples/ppp/</filename>.</para>
+ <para>A <command>ppp</command> és a
+ <command>pppd</command> (a PPP rendszerszintû
+ megvalósítása) egyaránt az
+ <filename>/etc/ppp</filename> könyvtárban
+ található konfigurációs
+ állományokat használja. A
+ felhasználói PPP-hez ezen kívül
+ még a <filename>/usr/share/examples/ppp/</filename>
+ könyvtárban vannak példák.</para>
- <para>Configuring <command>ppp</command> requires that you edit a
- number of files, depending on your requirements. What you put
- in them depends to some extent on whether your ISP allocates IP
- addresses statically (i.e., you get given one IP address, and
- always use that one) or dynamically (i.e., your IP address
- changes each time you connect to your ISP).</para>
+ <para>A <command>ppp</command> parancs
+ beállítása az igényeinktõl
+ függõen számos állomány
+ módosítását igényelheti. A
+ tartalmukat nagyban befolyásolja, hogy a
+ szolgáltatónk részérõl a
+ címeket kiosztása statikus (vagyis egy adott
+ címet kapunk és folyamatosan azt
+ használjuk) esetleg dinamikus (vagyis az
+ IP-címünk minden egyes
+ kapcsolódáskor más és
+ más).</para>
<sect4 id="userppp-staticIP">
- <title>PPP and Static IP Addresses</title>
+ <title>PPP statikus IP-címmel</title>
+
+ <indexterm>
+ <primary>PPP</primary>
+ <secondary>statikus IP-címmel</secondary>
+ </indexterm>
- <indexterm><primary>PPP</primary><secondary>with static IP addresses</secondary></indexterm>
- <para>You will need to edit the
- <filename>/etc/ppp/ppp.conf</filename> configuration file. It
- should look similar to the example below.</para>
+ <para>Ebben az esetben az
+ <filename>/etc/ppp/ppp.conf</filename>
+ konfigurációs állományt kell
+ átszerkesztenünk. Tartalma az alábbi
+ példához hasonlítható.</para>
<note>
- <para>Lines that end in a <literal>:</literal> start in
- the first column (beginning of the line)— all other
- lines should be indented as shown using spaces or
- tabs.</para>
+ <para>A <literal>:</literal> karakterrel
+ végzõdõ sorok mindig az elsõ oszlopban
+ kezdõdnek (tehát a sor elején),
+ míg az összes többi sort
+ tabulátorok vagy szóközök
+ használatával bentebb kell raknunk.</para>
</note>
<programlisting>1 default:
@@ -288,10 +379,10 @@
8 set timeout 180
9 enable dns
10
-11 provider:
+11 szolgaltato:
12 set phone "(123) 456 7890"
-13 set authname foo
-14 set authkey bar
+13 set authname ize
+14 set authkey mize
15 set login "TIMEOUT 10 \"\" \"\" gin:--gin: \\U word: \\P col: ppp"
16 set timeout 300
17 set ifaddr <replaceable>x.x.x.x</replaceable> <replaceable>y.y.y.y</replaceable> 255.255.255.255 0.0.0.0
@@ -299,418 +390,607 @@
<variablelist>
<varlistentry>
- <term>Line 1:</term>
+ <term>1. sor:</term>
<listitem>
- <para>Identifies the default entry. Commands in this
- entry are executed automatically when ppp is run.</para>
+ <para>Ez azonosítja be az alapértelmezett
+ bejegyzést. Az itt szereplõ parancsok a ppp
+ minden egyes futásakor magukból
+ végrehajtódnak.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>Line 2:</term>
+ <term>2. sor:</term>
<listitem>
- <para>Enables logging parameters. When the configuration
- is working satisfactorily, this line should be reduced
- to saying
+ <para>Beállítja a naplózás
+ paramétereit. Amikor a
+ beállításaink már
+ kifogástalanul mûködnek, akkor ezt a
+ sort érdemes átírni a
+ következõre:</para>
- <programlisting>set log phase tun</programlisting>
+ <programlisting>set log phase tun</programlisting>
- in order to avoid excessive log file sizes.</para>
+ <para>amivel jelentõs mértékben
+ vissza tudjuk fogni a naplózás
+ mértékét.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>Line 3:</term>
+ <term>3. sor:</term>
<listitem>
- <para>Tells PPP how to identify itself to the peer.
- PPP identifies itself to the peer if it has any trouble
- negotiating and setting up the link, providing information
- that the peers administrator may find useful when
- investigating such problems.</para>
+ <para>Ezzel mondjuk a PPP-nek, hogy a többiek
+ felé miként azonosítsa
+ magát. A PPP akkor azonosítja
+ magát a társak felé, ha valamilyen
+ gondja akad az egyeztetésekkel és a
+ kapcsolat beállításával.
+ Az így továbbított
+ információk a másik oldal
+ rendszergazdái számára
+ nyújthatnak segítséget az ilyen
+ jellegû problémák
+ felderítésében.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>Line 4:</term>
+ <term>4. sor:</term>
<listitem>
- <para>Identifies the device to which the modem is
- connected. <devicename>COM1</devicename> is
- <filename>/dev/cuaa0</filename> and
- <devicename>COM2</devicename> is
+ <para>Itt adjuk meg az eszközt, amire a modem
+ csatlakozik. A <devicename>COM1</devicename> neve
+ <filename>/dev/cuaa0</filename>, a
+ <devicename>COM2</devicename> neve pedig
<filename>/dev/cuaa1</filename>.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>Line 5:</term>
+ <term>5. sor:</term>
<listitem>
- <para>Sets the speed you want to connect at. If 115200
- does not work (it should with any reasonably new modem),
- try 38400 instead.</para>
+ <para>A csatlakozás sebességét
+ adjuk meg. Ha a 115200 érték itt nem
+ mûködne (ami egyébként minden
+ újabb gyártmányú modem
+ esetében elfogadható), akkor helyette
+ használjuk a 38400-as
+ beállítást.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>Line 6 & 7:</term>
+ <term>6. és 7. sorok:</term>
+
+ <indexterm>
+ <primary>PPP</primary>
+ <secondary>felhasználói PPP</secondary>
+ </indexterm>
- <indexterm><primary>PPP</primary><secondary>user PPP</secondary></indexterm>
<listitem>
- <para>The dial string. User PPP uses an expect-send
- syntax similar to the &man.chat.8; program. Refer to
- the manual page for information on the features of this
- language.</para>
+ <para>A híváshoz használt
+ karakterlánc. A felhasználói PPP a
+ &man.chat.8; programhoz hasonló
+ <quote>küldök-várok</quote>
+ típusú szerkesztést alkalmaz. A
+ nyelv lehetõségeirõl a man
+ oldalán olvashatunk
+ részletesebben.</para>
- <para>Note that this command continues onto the next line
- for readability. Any command in
- <filename>ppp.conf</filename> may do this if the last
- character on the line is a ``\'' character.</para>
+ <para>Vegyük észre, hogy az
+ olvashatóság kedvéért a
+ parancs a következõ sorban folytatódik.
+ A <filename>ppp.conf</filename>
+ állományban bármelyik parancs,
+ ahol a <quote>\</quote> karakterrel zárjuk a
+ sort, az ugyanígy folytatható a
+ következõben.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>Line 8:</term>
+ <term>8. sor:</term>
<listitem>
- <para>Sets the idle timeout for the link. 180 seconds
- is the default, so this line is purely cosmetic.</para>
+ <para>A kapcsolathoz tartozó
+ üresjárati idõt állítja
+ be. Ennek értéke alapból 180
+ másodperc, így ez a sor pusztán
+ csak az érthetõséget
+ szolgálja.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>Line 9:</term>
+ <term>9. sor:</term>
<listitem>
- <para>Tells PPP to ask the peer to confirm the local
- resolver settings. If you run a local name server, this
- line should be commented out or removed.</para>
+ <para>Arra utasítja a PPP-t, hogy a
+ többiektõl kérdezze le a helyi
+ névfeloldó
+ beállításait. Ha saját
+ névszervert futtatunk, akkor ezt a sort
+ tegyük megjegyzésbe vagy
+ töröljük ki.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>Line 10:</term>
+ <term>10. sor:</term>
<listitem>
- <para>A blank line for readability. Blank lines are ignored
- by PPP.</para>
+ <para>Ez az üres sor az
+ átláthatóság
+ kedvéért került bele. A PPP az
+ összes üres sort figyelmen kívül
+ hagyja.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>Line 11:</term>
+ <term>11. sor:</term>
<listitem>
- <para>Identifies an entry for a provider called
- <quote>provider</quote>. This could be changed
- to the name of your <acronym>ISP</acronym> so
- that later you can use the <option>load ISP</option>
- to start the connection.</para>
+ <para>Itt kezdõdik a <quote>szolgaltato</quote>
+ nevû szolgáltatóhoz tartozó
+ bejegyzés. Ezt késõbb akár ki
+ is cserélhetjük az internet
+ szolgáltatónk nevére, így
+ a <option>load szolgaltato</option>
+ beállítással tudjuk majd
+ beindítani a kapcsolatot.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>Line 12:</term>
+ <term>12. sor:</term>
<listitem>
- <para>Sets the phone number for this provider. Multiple
- phone numbers may be specified using the colon
- (<literal>:</literal>) or pipe character
- (<literal>|</literal>)as a separator. The difference
- between the two separators is described in &man.ppp.8;.
- To summarize, if you want to rotate through the numbers,
- use a colon. If you want to always attempt to dial the
- first number first and only use the other numbers if the
- first number fails, use the pipe character. Always
- quote the entire set of phone numbers as shown.</para>
-
- <para>You must enclose the phone number in quotation marks
- (<literal>"</literal>) if there is any intention on using
- spaces in the phone number. This can cause a simple, yet
- subtle error.</para>
+ <para>Beállítjuk a
+ szolgáltatóhoz tartozó
+ telefonszámot. A kettõspont
+ (<literal>:</literal>) vagy a csõvezeték
+ (<literal>|</literal>) karakterekkel
+ elválasztva több telefonszámot is
+ meg tudunk adni. A &man.ppp.8; oldalon olvashatunk a
+ két elválasztó közti
+ különbségekrõl. Röviden
+ ezeket úgy foglalhatnánk össze,
+ hogy ha váltogatni akarunk a számok
+ között, akkor használjuk a
+ kettõspontot. Ha mindig az elsõként
+ megadott számot akarjuk hívni és
+ a többit csak akkor, ha ez nem mûködik,
+ akkor a csõvezeték karakterre lesz
+ szükségünk. Ahogy a példa is
+ mutatja, az összes telefonszámot
+ tegyük mindig idézõjelek
+ közé.</para>
+
+ <para>Ha a telefonszámban egyébként
+ is szerepelnek szóközök, akkor is
+ idézõjelek (<literal>"</literal>)
+ közé kell tennünk. Ennek
+ elhagyásával egy egyszerû,
+ ámde kényes hibát
+ ejtünk.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>Line 13 & 14:</term>
+ <term>13. és 14. sor:</term>
<listitem>
- <para>Identifies the user name and password. When
- connecting using a &unix; style login prompt, these
- values are referred to by the <command>set
- login</command> command using the \U and \P
- variables. When connecting using PAP or CHAP, these
- values are used at authentication time.</para>
+ <para>A felhasználói nevet és
+ jelszót tartalmazza. Amikor egy &unix;
+ fajtájú bejelentkezést kapunk,
+ akkor ezekre az értékekre a <command>set
+ login</command> parancsban \U és \P
+ változókkal tudunk hivatkozni. Ha PAP
+ vagy CHAP használatával
+ jelentkezünk be, akkor ezek az
+ értékek a hitelesítéskor
+ kerülnek felhasználásra.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>Line 15:</term>
+ <term>15. sor:</term>
<listitem>
<indexterm><primary>PAP</primary></indexterm>
<indexterm><primary>CHAP</primary></indexterm>
- <para>If you are using PAP or CHAP, there will be no login
- at this point, and this line should be commented out or
- removed. See <link linkend="userppp-PAPnCHAP">PAP and CHAP
- authentication</link> for further details.</para>
+
+ <para>Ha a PAP vagy CHAP protokollok valamelyikét
+ használjuk, akkor nem lesz
+ szükségünk a login
+ változóra, ezért ezt
+ megjegyzésbe is tehetjük, vagy akár
+ ki is törölhetjük. A <link
+ linkend="userppp-PAPnCHAP">PAP és CHAP
+ hitelesítésrõl</link>
+ szóló részben olvashatjuk ennek
+ további részleteit.</para>
- <para>The login string is of the same chat-like syntax as
- the dial string. In this example, the string works for
- a service whose login session looks like this:</para>
+ <para>A bejelentkezéshez használt
+ karakterlánc hasonlít a
+ behíváshoz használt,
+ chat-szerû felépítéssel
+ rendelkezõ karakterlánchoz. A
+ példában látható
+ karakterlánc egy olyan
+ szolgáltatáshoz illeszkedik, ahol a
+ bejelentkezés valahogy így néz
+ ki:</para>
- <screen>J. Random Provider
-login: <replaceable>foo</replaceable>
-password: <replaceable>bar</replaceable>
+ <screen>Csodálatos Véletlen Szolgáltató
+login: <replaceable>ize</replaceable>
+password: <replaceable>mize</replaceable>
protocol: ppp</screen>
- <para>You will need to alter this script to suit your
- own needs. When you write this script for the first
- time, you should ensure that you have enabled
- <quote>chat</quote> logging so you can determine if
- the conversation is going as expected.</para>
+ <para>Ezt a szkriptet alakítsuk a saját
+ igényeinkhez. Ha elõször
+ próbálkozunk ilyen szkript
+ írásával, akkor lehetõleg
+ kapcsoljuk be a rendszerek között
+ lezajló
+ <quote>beszélgetés</quote>
+ naplózását, hogy ellenõrizni
+ tudjuk minden a megfelelõen módon
+ történik-e.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>Line 16:</term>
+ <term>16. sor:</term>
+
+ <indexterm><primary>idõkorlát</primary></indexterm>
- <indexterm><primary>timeout</primary></indexterm>
<listitem>
- <para>Sets the default idle timeout (in seconds) for the
- connection. Here, the connection will be closed
- automatically after 300 seconds of inactivity. If you
- never want to timeout, set this value to zero or use
- the <option>-ddial</option> command line switch.</para>
+ <para>Beállítjuk a kapcsolathoz
+ tartozó alapértelmezett
+ idõkorlátot (másodpercben). Itt a
+ kapcsolat automatikusan lezárul 300
+ másodperc tétlenséget
+ követõen. Ha nem akarunk ilyen
+ korlátot szabni, akkor ezt az
+ értéket állítsuk
+ nullára vagy használjuk a
+ <option>-ddial</option> paranccsori
+ kapcsolót.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>Line 17:</term>
- <indexterm><primary>ISP</primary></indexterm>
+ <term>17. sor:</term>
+ <indexterm><primary>internet
+ szolgáltató</primary></indexterm>
+
<listitem>
- <para>Sets the interface addresses. The string
- <replaceable>x.x.x.x</replaceable> should be
- replaced by the IP address that your provider has
- allocated to you. The string
- <replaceable>y.y.y.y</replaceable> should be
- replaced by the IP address that your ISP indicated
- for their gateway (the machine to which you
- connect). If your ISP has not given you a gateway
- address, use <hostid
- role="netmask">10.0.0.2/0</hostid>. If you need to
- use a <quote>guessed</quote> address, make sure that
- you create an entry in
- <filename>/etc/ppp/ppp.linkup</filename> as per the
- instructions for <link
- linkend="userppp-dynamicIP">PPP and Dynamic IP
- addresses</link>. If this line is omitted,
- <command>ppp</command> cannot run in
- <option>-auto</option> mode.</para>
+ <para>A felülethez tartozó címeket
+ állítja be. A
+ <replaceable>x.x.x.x</replaceable> helyére a
+ szolgáltató által kiosztott
+ IP-címet kell beírnunk. A
+ <replaceable>y.y.y.y</replaceable> helyett pedig a
+ szolgáltató
+ átjárója kerül be
+ (lényegében az a gép, amihez
+ csatlakozunk). Amennyiben az internet
+ szolgáltatónk nem adott meg semmilyen
+ átjárót, erre a célra a
+ <hostid role="netmask">10.0.0.2/0</hostid>
+ címet is használhatjuk. Amikor
+ <quote>ki kell találnunk</quote> ezeket a
+ címeket, akkor ne felejtsünk el
+ létrehozni hozzájuk egy
+ bejegyzést a
+ <filename>/etc/ppp/ppp.linkup</filename>
+ állományban a <link
+ linkend="userppp-dynamicIP">PPP dinamikus
+ IP-címmel </link> szakaszban szereplõek
+ szerint. Ha nem adjuk meg ezt a sort, akkor a
+ <command>ppp</command> parancs nem képes
+ <option>-auto</option> módban
+ mûködni.</para>
</listitem>
</varlistentry>
<varlistentry>
- <term>Line 18:</term>
+ <term>18. sor:</term>
<listitem>
- <para>Adds a default route to your ISP's gateway. The
- special word <literal>HISADDR</literal> is replaced with
- the gateway address specified on line 17. It is
- important that this line appears after line 17,
- otherwise <literal>HISADDR</literal> will not yet be
- initialized.</para>
+ <para>A szolgáltató
+ átjárójához felvesz egy
+ alapértelmezett útvonalat. A
+ <literal>HISADDR</literal> kulcsszót a 17.
+ sorban megadott átjáró
+ címével helyettesítjük.
+ Ezért fontos, hogy ez a 17. sor után
+ szerepeljen, különben a
+ <literal>HISADDR</literal> nem lesz képes
+ inicializálódni.</para>
- <para>If you do not wish to run ppp in <option>-auto</option>,
- this line should be moved to the
- <filename>ppp.linkup</filename> file.</para>
+ <para>Ha a ppp-t nem akarjuk <option>-auto</option>
+ módban futtatni, akkor ezt a sor a
+ <filename>ppp.linkup</filename> állományba
+ is átrakhatjuk.</para>
</listitem>
</varlistentry>
</variablelist>
- <para>It is not necessary to add an entry to
- <filename>ppp.linkup</filename> when you have a static IP
- address and are running ppp in <option>-auto</option> mode as your
- routing table entries are already correct before you connect.
- You may however wish to create an entry to invoke programs after
- connection. This is explained later with the sendmail
- example.</para>
+ <para>Ha statikus IP-címmel rendelkezünk és
+ a ppp <option>-auto</option> módban fut, akkor a
+ <filename>ppp.linkup</filename> állományba
+ egészen addig nem kell semmit sem írnunk,
+ amíg a csatlakozás elõtt az
+ útválasztási
>>> TRUNCATED FOR MAIL (1000 lines) <<<
More information about the p4-projects
mailing list