PERFORCE change 127203 for review
Constantine A. Murenin
cnst at FreeBSD.org
Thu Oct 4 17:04:38 PDT 2007
http://perforce.freebsd.org/chv.cgi?CH=127203
Change 127203 by cnst at dale on 2007/10/05 00:04:20
remove settings that were used for debugging sensorsd and lm on FreeBSD;
reminded by hasso's commit
Affected files ...
.. //depot/projects/soc2007/cnst-sensors/etc/sensorsd.conf#5 edit
Differences ...
==== //depot/projects/soc2007/cnst-sensors/etc/sensorsd.conf#5 (text+ko) ====
@@ -1,4 +1,4 @@
-# $P4: //depot/projects/soc2007/cnst-sensors/etc/sensorsd.conf#4 $
+# $P4: //depot/projects/soc2007/cnst-sensors/etc/sensorsd.conf#5 $
# $FreeBSD$
# $OpenBSD: sensorsd.conf,v 1.8 2007/08/14 19:02:02 cnst Exp $
@@ -6,11 +6,6 @@
# Sample sensorsd.conf file. See sensorsd.conf(5) for details.
#
-#the following three entries are for debugging sensorsd(8) with lm(4)
-temp:low=24C:high=64C
-fan:low=0:high=1024
-volt:low=0V:high=12.6V
-
# +5 voltage (volts)
#hw.sensors.lm0.volt3:low=4.8V:high=5.2V
More information about the p4-projects
mailing list