PERFORCE change 128693 for review

[Juli Mallett]

Great work you're doing!

* Oleksandr Tymoshenko <gonzo at FreeBSD.org> [ 2007-11-05 ]
	[ PERFORCE change 128693 for review ]
> http://perforce.freebsd.org/chv.cgi?CH=128693
> 
> Change 128693 by gonzo at gonzo_jeeves on 2007/11/05 19:09:07
> 
> 	o Try bootp on vr0
> 	o Add and comment out options for ath(4)
> 	o Enable uart
> 
> Affected files ...
> 
> .. //depot/projects/mips2/src/sys/mips/conf/IDT#3 edit
> 
> Differences ...
> 
> ==== //depot/projects/mips2/src/sys/mips/conf/IDT#3 (text+ko) ====
> 
> @@ -26,10 +26,10 @@
>  options		BOOTP
>  options		BOOTP_NFSROOT
>  options		BOOTP_NFSV3
> -options		BOOTP_WIRED_TO=admsw0
> +options		BOOTP_WIRED_TO=vr0
>  options		BOOTP_COMPAT
>  
> -options		ROOTDEVNAME=\"nfs:10.0.0.1:/mnt/bsd\"
> +options		ROOTDEVNAME=\"nfs:192.168.0.52:/mnt/bsd\"
>  
>  
>  # Debugging for use in -current
> @@ -42,3 +42,15 @@
>  device		ether
>  device		miibus
>  device		vr
> +device		uart
> +device		uart_ns8250
> +
> +# Wireless NIC cards
> +#device          wlan            # 802.11 support
> +#device         wlan_wep        # 802.11 WEP support
> +#device         wlan_ccmp       # 802.11 CCMP support
> +#device         wlan_tkip       # 802.11 TKIP support
> +#device          ath             # Atheros pci/cardbus NIC's
> +#device          ath_hal         # Atheros HAL (Hardware Access Layer)
> +#device          ath_rate_sample # SampleRate tx rate control for ath
> +#options         ATH_DEBUG