PERFORCE change 125476 for review
Christopher Davis
loafier at FreeBSD.org
Mon Aug 20 18:59:27 PDT 2007
http://perforce.freebsd.org/chv.cgi?CH=125476
Change 125476 by loafier at chrisdsoc on 2007/08/21 01:58:53
integrate
Affected files ...
.. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml#5 integrate
.. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/articles/rc-scripting/article.sgml#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/config/chapter.sgml#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/disks/chapter.sgml#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/install/chapter.sgml#6 integrate
.. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/introduction/chapter.sgml#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/network-servers/chapter.sgml#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/doc/hu_HU.ISO8859-2/articles/Makefile#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/doc/hu_HU.ISO8859-2/articles/explaining-bsd/Makefile#1 branch
.. //depot/projects/soc2007/loafier_busalloc/doc/hu_HU.ISO8859-2/articles/explaining-bsd/article.sgml#1 branch
.. //depot/projects/soc2007/loafier_busalloc/doc/mn_MN.UTF-8/books/handbook/bibliography/chapter.sgml#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/doc/mn_MN.UTF-8/books/handbook/install/chapter.sgml#5 integrate
.. //depot/projects/soc2007/loafier_busalloc/doc/mn_MN.UTF-8/share/sgml/trademarks.ent#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/doc/share/sgml/freebsd.ent#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/doc/share/sgml/man-refs.ent#5 integrate
.. //depot/projects/soc2007/loafier_busalloc/doc/share/sgml/trademarks.ent#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/doc/zh_TW.Big5/books/handbook/install/chapter.sgml#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/ports/MOVED#6 integrate
.. //depot/projects/soc2007/loafier_busalloc/ports/Mk/bsd.sites.mk#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/ports/Tools/scripts/README#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/ports/Tools/scripts/neededlibs.sh#1 branch
.. //depot/projects/soc2007/loafier_busalloc/ports/Tools/scripts/resolveportsfromlibs.sh#1 branch
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/BASE-VER#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/ChangeLog#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/DATESTAMP#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/Makefile.in#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/calls.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/combine.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/arm/arm.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/arm/cirrus.md#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/i386/i386.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/i386/i386.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/i386/i386.md#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/i386/sse.md#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/mips/iris6.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/rs6000/predicates.md#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/rs6000/rs6000.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/double.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/extended.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/floatundidf.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/floatundisf.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/floatunsidf.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/floatunsisf.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/op-2.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/op-4.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/op-common.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/soft-fp/quad.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/config/sparc/sparc.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/ChangeLog#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/call.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/class.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/cp-tree.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/decl.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/decl2.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/init.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/parser.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/pt.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/semantics.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/typeck.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/cp/typeck2.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/doc/cpp.1#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/doc/gcc.1#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/doc/gcov.1#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/dwarf2out.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/except.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/fold-const.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/function.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/gimplify.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/gthr-posix.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/gthr-posix.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/loop-iv.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/objc/ChangeLog#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/omp-low.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/pointer-set.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/pointer-set.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/reload.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/tree-if-conv.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/tree-ssa-loop-niter.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/tree-ssa-operands.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/tree-ssa-structalias.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/tree-vrp.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcc/version.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/include/ChangeLog#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/libcpp/ChangeLog#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/libdecnumber/ChangeLog#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/libgomp/ChangeLog#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/libgomp/config/posix/lock.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/libgomp/sections.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/libiberty/ChangeLog#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/libmudflap/ChangeLog#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/gcclibs/libssp/ChangeLog#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/less/main.c#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/libobjc/ChangeLog#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/ChangeLog#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/acinclude.m4#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/config.h.in#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/configure#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/include/Makefile.am#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/include/Makefile.in#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/include/bits/ostream.tcc#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/include/bits/ostream_insert.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/include/ext/throw_allocator.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/include/std/std_fstream.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/libsupc++/exception#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/libsupc++/new#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/contrib/libstdc++/libsupc++/typeinfo#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/etc/etc.arm/ttys#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/etc/namedb/named.conf#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/etc/rc.d/Makefile#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/etc/rc.d/lockd#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/etc/rc.d/nfslocking#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/etc/rc.d/statd#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/gnu/lib/libgcc/Makefile#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/gnu/lib/libstdc++/Makefile#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/archive_read_support_format_tar.c#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/archive_write_disk.c#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/test/test_read_format_gtar_sparse.c#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/lib/libarchive/test/test_write_disk_perms.c#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/release/Makefile#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/Makefile#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/Makefile#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/hardware/article.sgml#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/hardware/common/artheader.sgml#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/hardware/common/dev.sgml#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/hardware/common/hw.ent#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/hardware/common/intro.sgml#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/Makefile#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/Makefile.inc#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/amd64/Makefile#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/amd64/article.sgml#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/common/abstract.sgml#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/common/artheader.sgml#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/common/install.ent#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/common/install.sgml#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/common/layout.sgml#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/common/trouble.sgml#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/common/upgrade.sgml#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/i386/Makefile#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/i386/article.sgml#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/ia64/Makefile#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/ia64/article.sgml#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/pc98/Makefile#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/pc98/article.sgml#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/powerpc/Makefile#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/powerpc/article.sgml#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/sparc64/Makefile#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/sparc64/article.sgml#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/installation/sparc64/install.sgml#2 delete
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/readme/article.sgml#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/en_US.ISO8859-1/relnotes/article.sgml#6 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/share/examples/Makefile.relnotesng#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/share/misc/dev.archlist.txt#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/release/doc/share/sgml/release.ent#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sbin/atacontrol/atacontrol.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sbin/reboot/boot_i386.8#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sbin/tunefs/tunefs.8#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/share/man/man4/mfi.4#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/share/man/man4/ng_fec.4#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/share/man/man5/Makefile#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/share/man/man5/boot.config.5#1 branch
.. //depot/projects/soc2007/loafier_busalloc/src/share/mk/sys.mk#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/amd64/conf/NOTES#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/amd64/include/specialreg.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/arm/arm/busdma_machdep.c#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/boot/arm/at91/boot2/boot2.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/compat/freebsd32/freebsd32_proto.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/compat/freebsd32/freebsd32_syscall.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/compat/freebsd32/freebsd32_syscalls.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/compat/freebsd32/freebsd32_sysent.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/compat/freebsd32/syscalls.master#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/compat/opensolaris/sys/proc.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/conf/NOTES#5 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/conf/files.amd64#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/conf/files.i386#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/ata/ata-raid.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/coretemp/coretemp.c#1 branch
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/common/cxgb_t3_hw.c#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_adapter.h#4 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_ioctl.h#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_l2t.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_l2t.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_main.c#4 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_offload.c#4 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_offload.h#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/cxgb/cxgb_sge.c#4 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/dcons/dcons_os.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/ichwd/ichwd.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/ichwd/ichwd.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mfi/mfi.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mfi/mfi_disk.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mfi/mfi_pci.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mfi/mfireg.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mfi/mfivar.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mpt/mpt.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mpt/mpt.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/mpt/mpt_cam.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/re/if_re.c#5 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/dev/usb/ehci.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/fs/msdosfs/msdosfs_vfsops.c#4 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/fs/tmpfs/tmpfs_vnops.c#4 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/gnu/fs/ext2fs/ext2_vfsops.c#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/gnu/fs/xfs/FreeBSD/xfs_mountops.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/i386/conf/NOTES#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/i386/include/specialreg.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/init_sysent.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/kern_cpu.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/kern_switch.c#4 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/kern_thr.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/sched_ule.c#5 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/syscalls.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/syscalls.master#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/systrace_args.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/vfs_aio.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/vfs_mount.c#4 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/kern/vfs_subr.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/modules/Makefile#4 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/modules/coretemp/Makefile#1 branch
.. //depot/projects/soc2007/loafier_busalloc/src/sys/modules/netgraph/bluetooth/Makefile#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/net/bridgestp.c#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/netgraph/bluetooth/drivers/h4/TODO#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/netgraph/bluetooth/drivers/h4/ng_h4.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/netgraph/bluetooth/drivers/h4/ng_h4_prse.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/netgraph/bluetooth/drivers/h4/ng_h4_var.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/netgraph/ng_base.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_asconf.c#4 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_input.c#5 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_output.c#4 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_pcb.c#4 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_timer.c#4 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctp_usrreq.c#5 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/sctputil.c#5 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/netinet/tcp_subr.c#4 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/include/intr_machdep.h#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/include/md_var.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/include/openpicvar.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powermac/hrowpic.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powermac/hrowpicvar.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powermac/openpic_macio.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powerpc/autoconf.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powerpc/interrupt.c#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powerpc/intr_machdep.c#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powerpc/nexus.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powerpc/openpic.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/powerpc/pic_if.m#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/powerpc/psim/openpic_iobus.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/sys/ata.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/sys/syscall.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/sys/syscall.mk#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/sys/sysproto.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/sys/thr.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/vm/device_pager.c#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/vm/phys_pager.c#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/vm/vm_map.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/vm/vm_map.h#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/sys/vm/vm_mmap.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/usr.sbin/freebsd-update/freebsd-update.sh#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/usr.sbin/rpc.statd/file.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/src/usr.sbin/sysinstall/menus.c#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/www/en/gnome/news.xml#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/www/en/relnotes.sgml#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/www/ru/Makefile#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/www/share/sgml/commercial.consult.xml#2 integrate
.. //depot/projects/soc2007/loafier_busalloc/www/share/sgml/commercial.isp.xml#3 integrate
.. //depot/projects/soc2007/loafier_busalloc/www/share/sgml/commercial.software.xml#2 integrate
Differences ...
==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml#5 (text+ko) ====
@@ -1,4 +1,4 @@
-<!-- $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml,v 1.720 2007/08/10 14:34:12 cognet Exp $ -->
+<!-- $FreeBSD: doc/en_US.ISO8859-1/articles/contributors/contrib.additional.sgml,v 1.721 2007/08/19 14:58:36 gabor Exp $ -->
<!--
NOTE TO COMMITTERS: Contributors lists are sorted in alphabetical
order by first name.
@@ -7623,6 +7623,11 @@
</listitem>
<listitem>
+ <para>Pontus Stenetorp
+ <email>ninjin at kth.se</email></para>
+ </listitem>
+
+ <listitem>
<para>Powerdog Industries
<email>kevin.ruddy at powerdog.com</email></para>
</listitem>
==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/articles/rc-scripting/article.sgml#2 (text+ko) ====
@@ -25,7 +25,7 @@
<holder>The FreeBSD Project</holder>
</copyright>
- <pubdate>$FreeBSD: doc/en_US.ISO8859-1/articles/rc-scripting/article.sgml,v 1.10 2007/03/04 13:33:06 yar Exp $</pubdate>
+ <pubdate>$FreeBSD: doc/en_US.ISO8859-1/articles/rc-scripting/article.sgml,v 1.13 2007/08/16 13:08:42 yar Exp $</pubdate>
<legalnotice id="trademarks" role="trademarks">
&tm-attrib.freebsd;
@@ -1096,8 +1096,21 @@
</callout>
<callout arearefs="rcng-hookup-keyword">
- <para><anchor id="keywords">There are several keywords used
- in &os;:</para>
+ <para><anchor id="keywords">As we remember from the above text,
+ &man.rcorder.8; keywords can be used to select or leave
+ out some scripts. Namely any &man.rcorder.8; consumer
+ can specify through <option>-k</option> and <option>-s</option>
+ options which keywords are on the <quote>keep list</quote> and
+ <quote>skip list</quote>, respectively. From all the
+ files to be dependency sorted, &man.rcorder.8; will pick
+ only those having a keyword from the keep list (unless empty)
+ and not having a keyword from the skip list.</para>
+
+ <para>In &os;, &man.rcorder.8; is used by
+ <filename>/etc/rc</filename> and
+ <filename>/etc/rc.shutdown</filename>. These two scripts
+ define the standard list of &os; <filename>rc.d</filename>
+ keywords and their meanings as follows:</para>
<variablelist>
<varlistentry>
@@ -1127,10 +1140,43 @@
<term><literal>shutdown</literal></term>
<listitem>
- <para>The script wants to be run during system
- shutdown. Without the keyword listed,
- <filename>/etc/rc.shutdown</filename> would ignore
- it for faster shutdown.</para>
+ <para>This keyword is to be listed
+ <emphasis>explicitly</emphasis> if the service needs
+ to be stopped before system shutdown.</para>
+
+ <note>
+ <para>When the system is going to shut down,
+ <filename>/etc/rc.shutdown</filename> runs. It
+ assumes that most <filename>rc.d</filename> scripts
+ have nothing to do at that time. Therefore
+ <filename>/etc/rc.shutdown</filename>
+ selectively invokes <filename>rc.d</filename>
+ scripts with the <literal>shutdown</literal>
+ keyword, effectively ignoring the
+ rest of the scripts. For even faster shutdown,
+ <filename>/etc/rc.shutdown</filename> passes
+ the <option>faststop</option> command to the scripts
+ it runs so that they skip preliminary checks, e.g.,
+ the pidfile check. As dependent services should be
+ stopped before their prerequisites,
+ <filename>/etc/rc.shutdown</filename> runs the scripts
+ in reverse dependency order.</para>
+
+ <para>If writing a real
+ <filename>rc.d</filename> script, you should
+ consider whether it is relevant at system shutdown
+ time. E.g., if your script does its work in
+ response to the <option>start</option> command
+ only, then you need not include this keyword.
+ However, if your script manages a service, it is
+ probably a good idea to stop it before the system
+ proceeds to the final stage of its shutdown
+ sequence described in &man.halt.8;. In particular,
+ a service should be stopped explicitly if it needs
+ considerable time or special actions to shut down
+ cleanly. A typical example of such a service is
+ a database engine.</para>
+ </note>
</listitem>
</varlistentry>
</variablelist>
==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml#3 (text+ko) ====
@@ -1,7 +1,7 @@
<!--
The FreeBSD Documentation Project
- $FreeBSD: doc/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml,v 1.398 2007/08/02 08:21:53 blackend Exp $
+ $FreeBSD: doc/en_US.ISO8859-1/books/handbook/advanced-networking/chapter.sgml,v 1.399 2007/08/19 18:33:27 blackend Exp $
-->
<chapter id="advanced-networking">
@@ -2771,6 +2771,91 @@
the full <hostid role="netmask">/24</hostid> address range
can be allocated without subnetting.</para>
</sect3>
+
+ <sect3>
+ <title>SNMP Monitoring</title>
+
+ <para>The bridge interface and STP parameters can be monitored
+ via the SNMP daemon which is included in the &os; base
+ system. The exported bridge MIBs conform to the IETF
+ standards so any SNMP client or monitoring package can be
+ used to retrieve the data.</para>
+
+ <para>On the bridge machine uncomment the
+ <literal>begemotSnmpdModulePath."bridge" =
+ "/usr/lib/snmp_bridge.so"</literal> line from
+ <filename>/etc/snmp.config</filename> and start the
+ <application>bsnmpd</application> daemon. Other
+ configuration such as community names and access lists may
+ need to be modified. See &man.bsnmpd.1; and
+ &man.snmp.bridge.3; for more information.</para>
+
+ <para>The following examples use the
+ <application>Net-SNMP</application> software (<filename
+ role="package">net-mgmt/net-snmp</filename>) to query a
+ bridge, the <filename
+ role="package">net-mgmt/bsnmptools</filename> port can also
+ be used. From the SNMP client host add to
+ <filename>$HOME/.snmp/snmp.conf</filename> the following
+ lines to import the bridge MIB definitions in to
+ <application>Net-SNMP</application>:</para>
+
+ <programlisting>mibdirs +/usr/share/snmp/mibs
+mibs +BRIDGE-MIB:RSTP-MIB:BEGEMOT-MIB:BEGEMOT-BRIDGE-MIB</programlisting>
+
+ <para>To monitor a single bridge via the IETF BRIDGE-MIB
+ (RFC4188) do</para>
+
+ <screen>&prompt.user; <userinput>snmpwalk -v 2c -c public bridge1.example.com mib-2.dot1dBridge</userinput>
+BRIDGE-MIB::dot1dBaseBridgeAddress.0 = STRING: 66:fb:9b:6e:5c:44
+BRIDGE-MIB::dot1dBaseNumPorts.0 = INTEGER: 1 ports
+BRIDGE-MIB::dot1dStpTimeSinceTopologyChange.0 = Timeticks: (189959) 0:31:39.59 centi-seconds
+BRIDGE-MIB::dot1dStpTopChanges.0 = Counter32: 2
+BRIDGE-MIB::dot1dStpDesignatedRoot.0 = Hex-STRING: 80 00 00 01 02 4B D4 50
+...
+BRIDGE-MIB::dot1dStpPortState.3 = INTEGER: forwarding(5)
+BRIDGE-MIB::dot1dStpPortEnable.3 = INTEGER: enabled(1)
+BRIDGE-MIB::dot1dStpPortPathCost.3 = INTEGER: 200000
+BRIDGE-MIB::dot1dStpPortDesignatedRoot.3 = Hex-STRING: 80 00 00 01 02 4B D4 50
+BRIDGE-MIB::dot1dStpPortDesignatedCost.3 = INTEGER: 0
+BRIDGE-MIB::dot1dStpPortDesignatedBridge.3 = Hex-STRING: 80 00 00 01 02 4B D4 50
+BRIDGE-MIB::dot1dStpPortDesignatedPort.3 = Hex-STRING: 03 80
+BRIDGE-MIB::dot1dStpPortForwardTransitions.3 = Counter32: 1
+RSTP-MIB::dot1dStpVersion.0 = INTEGER: rstp(2)</screen>
+
+ <para>The <literal>dot1dStpTopChanges.0</literal> value is two
+ which means that the STP bridge topology has changed twice,
+ a topology change means that one or more links in the
+ network have changed or failed and a new tree has been
+ calculated. The
+ <literal>dot1dStpTimeSinceTopologyChange.0</literal> value
+ will show when this happened.</para>
+
+ <para>To monitor multiple bridge interfaces one may use the
+ private BEGEMOT-BRIDGE-MIB:</para>
+
+ <screen>&prompt.user; <userinput>snmpwalk -v 2c -c public bridge1.example.com</userinput>
+enterprises.fokus.begemot.begemotBridge
+BEGEMOT-BRIDGE-MIB::begemotBridgeBaseName."bridge0" = STRING: bridge0
+BEGEMOT-BRIDGE-MIB::begemotBridgeBaseName."bridge2" = STRING: bridge2
+BEGEMOT-BRIDGE-MIB::begemotBridgeBaseAddress."bridge0" = STRING: e:ce:3b:5a:9e:13
+BEGEMOT-BRIDGE-MIB::begemotBridgeBaseAddress."bridge2" = STRING: 12:5e:4d:74:d:fc
+BEGEMOT-BRIDGE-MIB::begemotBridgeBaseNumPorts."bridge0" = INTEGER: 1
+BEGEMOT-BRIDGE-MIB::begemotBridgeBaseNumPorts."bridge2" = INTEGER: 1
+...
+BEGEMOT-BRIDGE-MIB::begemotBridgeStpTimeSinceTopologyChange."bridge0" = Timeticks: (116927) 0:19:29.27 centi-seconds
+BEGEMOT-BRIDGE-MIB::begemotBridgeStpTimeSinceTopologyChange."bridge2" = Timeticks: (82773) 0:13:47.73 centi-seconds
+BEGEMOT-BRIDGE-MIB::begemotBridgeStpTopChanges."bridge0" = Counter32: 1
+BEGEMOT-BRIDGE-MIB::begemotBridgeStpTopChanges."bridge2" = Counter32: 1
+BEGEMOT-BRIDGE-MIB::begemotBridgeStpDesignatedRoot."bridge0" = Hex-STRING: 80 00 00 40 95 30 5E 31
+BEGEMOT-BRIDGE-MIB::begemotBridgeStpDesignatedRoot."bridge2" = Hex-STRING: 80 00 00 50 8B B8 C6 A9</screen>
+
+ <para>To change the bridge interface being monitored via the
+ <literal>mib-2.dot1dBridge</literal> subtree do:</para>
+
+ <screen>&prompt.user; <userinput>snmpset -v 2c -c private bridge1.example.com</userinput>
+BEGEMOT-BRIDGE-MIB::begemotBridgeDefaultBridgeIf.0 s bridge2</screen>
+ </sect3>
</sect2>
</sect1>
==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/config/chapter.sgml#2 (text+ko) ====
@@ -1,7 +1,7 @@
<!--
The FreeBSD Documentation Project
- $FreeBSD: doc/en_US.ISO8859-1/books/handbook/config/chapter.sgml,v 1.226 2007/04/07 20:21:09 njl Exp $
+ $FreeBSD: doc/en_US.ISO8859-1/books/handbook/config/chapter.sgml,v 1.227 2007/08/17 12:54:31 blackend Exp $
-->
<chapter id="config-tuning">
@@ -2391,13 +2391,13 @@
<para>To see the current number of vnodes in use:</para>
- <programlisting>&prompt.root; sysctl vfs.numvnodes
-vfs.numvnodes: 91349</programlisting>
+ <screen>&prompt.root; <userinput>sysctl vfs.numvnodes</userinput>
+vfs.numvnodes: 91349</screen>
<para>To see the maximum vnodes:</para>
- <programlisting>&prompt.root; sysctl kern.maxvnodes
-kern.maxvnodes: 100000</programlisting>
+ <screen>&prompt.root; <userinput>sysctl kern.maxvnodes</userinput>
+kern.maxvnodes: 100000</screen>
<para>If the current vnode usage is near the maximum, increasing
<varname>kern.maxvnodes</varname> by a value of 1,000 is
==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/disks/chapter.sgml#2 (text+ko) ====
@@ -1,7 +1,7 @@
<!--
The FreeBSD Documentation Project
- $FreeBSD: doc/en_US.ISO8859-1/books/handbook/disks/chapter.sgml,v 1.274 2007/06/15 12:41:54 den Exp $
+ $FreeBSD: doc/en_US.ISO8859-1/books/handbook/disks/chapter.sgml,v 1.275 2007/08/20 16:48:01 blackend Exp $
-->
<chapter id="disks">
@@ -3748,8 +3748,8 @@
provided. Arguments for this script can be passed via
&man.rc.conf.5;, for example:</para>
- <screen>gbde_autoattach_all="YES"
-gbde_devices="ad4s1c"</screen>
+ <programlisting>gbde_autoattach_all="YES"
+gbde_devices="ad4s1c"</programlisting>
<para>This will require that the <application>gbde</application>
passphrase be entered at boot time. After typing the correct
@@ -3805,7 +3805,7 @@
<para>A new cryptographic GEOM class is available as of &os; 6.0 -
<command>geli</command>. It is currently being developed by
- &a.pjd;. <command>Geli</command> is different to
+ &a.pjd;. The <command>geli</command> utility is different to
<command>gbde</command>; it offers different features and uses
a different scheme for doing cryptographic work.</para>
@@ -3851,9 +3851,7 @@
<para>The next steps will describe how to enable support for
<command>geli</command> in the &os; kernel and will explain how
- to create a new <command>geli</command> encryption provider. At
- the end it will be demonstrated how to create an encrypted swap
- partition using features provided by <command>geli</command>.</para>
+ to create and use a <command>geli</command> encryption provider.</para>
<para>In order to use <command>geli</command>, you must be running
&os; 6.0-RELEASE or later. Super-user privileges will be
@@ -3861,14 +3859,13 @@
<procedure>
<step>
- <title>Adding <command>geli</command> Support to the Kernel
- Configuration File</title>
+ <title>Adding <command>geli</command> Support to the Kernel</title>
<para>Add the following lines to the kernel configuration
file:</para>
- <screen>options GEOM_ELI
-device crypto</screen>
+ <programlisting>options GEOM_ELI
+device crypto</programlisting>
<para>Rebuild the kernel as described in <xref
linkend="kernelconfig">.</para>
@@ -3877,7 +3874,7 @@
be loaded at boot time. Add the following line to the
<filename>/boot/loader.conf</filename>:</para>
- <para><literal>geom_eli_load="YES"</literal></para>
+ <programlisting>geom_eli_load="YES"</programlisting>
<para>&man.geli.8; should now be supported by the kernel.</para>
</step>
@@ -3943,7 +3940,7 @@
&prompt.root; <userinput>mount /dev/da2.eli /private</userinput></screen>
<para>The encrypted file system should be visible to &man.df.1;
- and be available for use now.</para>
+ and be available for use now:</para>
<screen>&prompt.root; <userinput>df -H</userinput>
Filesystem Size Used Avail Capacity Mounted on
@@ -3981,8 +3978,8 @@
An example of configuring <command>geli</command> through
&man.rc.conf.5; follows:</para>
- <screen>geli_devices="da2"
-geli_da2_flags="-p -k /root/da2.key"</screen>
+ <programlisting>geli_devices="da2"
+geli_da2_flags="-p -k /root/da2.key"</programlisting>
<para>This will configure <filename>/dev/da2</filename> as a
<command>geli</command> provider of which the Master Key file
@@ -4067,10 +4064,10 @@
<literal>.bde</literal> suffix should be added to the device in the
respective <filename>/etc/fstab</filename> swap line:</para>
- <screen>
+ <programlisting>
# Device Mountpoint FStype Options Dump Pass#
/dev/ad0s1b.bde none swap sw 0 0
- </screen>
+ </programlisting>
<para>For systems prior to &os; 6.0-RELEASE, the following line
in <filename>/etc/rc.conf</filename> is also needed:</para>
@@ -4086,10 +4083,10 @@
<literal>.eli</literal> suffix should be added to the device in the
respective <filename>/etc/fstab</filename> swap line:</para>
- <screen>
+ <programlisting>
# Device Mountpoint FStype Options Dump Pass#
/dev/ad0s1b.eli none swap sw 0 0
- </screen>
+ </programlisting>
<para>&man.geli.8; uses the <acronym>AES</acronym> algorithm with
a key length of 256 bit by default.</para>
==== //depot/projects/soc2007/loafier_busalloc/doc/en_US.ISO8859-1/books/handbook/install/chapter.sgml#6 (text+ko) ====
@@ -1,7 +1,7 @@
<!--
The FreeBSD Documentation Project
- $FreeBSD: doc/en_US.ISO8859-1/books/handbook/install/chapter.sgml,v 1.375 2007/08/11 13:59:20 blackend Exp $
+ $FreeBSD: doc/en_US.ISO8859-1/books/handbook/install/chapter.sgml,v 1.380 2007/08/12 13:09:23 blackend Exp $
-->
<chapter id="install">
@@ -104,9 +104,9 @@
linkend="install-floppies">.</para>
<sect3>
- <title>&i386; and pc98 Architectures</title>
+ <title>&os;/&arch.i386; and &os;/&arch.pc98;</title>
- <para>Both &os;/&i386 and &os;/pc98 versions require a 486 or
+ <para>Both &os;/&arch.i386; and &os;/&arch.pc98; require a 486 or
better processor and at least 24 MB of RAM. You will
need at least 150 MB of free hard drive space for the
most minimal installation.</para>
@@ -119,11 +119,11 @@
</sect3>
<sect3>
- <title>Alpha Architecture</title>
+ <title>&os;/&arch.alpha;</title>
<indexterm><primary>Alpha</primary></indexterm>
- <para>To install &os;/alpha, you will need a supported
+ <para>To install &os;/&arch.alpha;, you will need a supported
platform (see <xref linkend="install-hardware-supported">)
and a dedicated disk for &os;. It is not possible to share
a disk with another operating system at this time. This
@@ -140,14 +140,32 @@
AlphaBIOS (or ARC) firmware and SRM. In others it will be
necessary to download new firmware from the vendor's Web
site.</para>
+
+ <note>
+ <para>Support for the Alpha was removed beginning with
+ &os; 7.0. The
+ &os; 6.<replaceable>X</replaceable> series of
+ releases is the last containing support for this
+ architecture.</para>
+ </note>
+
</sect3>
<sect3>
- <title>amd64 Architecture</title>
+ <title>&os;/&arch.amd64; Architecture</title>
+
+ <para>There are two classes of processors capable of running
+ &os;/&arch.amd64;. The first are AMD64 processors,
+ including the &amd.athlon;64,
+ &amd.athlon;64-FX, &amd.opteron; or better
+ processors.</para>
- <para>&os;/amd64 requires an &amd.athlon;64,
- &amd.athlon;64-FX, &amd.opteron; or better processor to
- run.</para>
+ <para>The second class of processors that can use
+ &os;/&arch.amd64; includes those using the &intel; EM64T
+ architecture. Examples of these processors include the
+ &intel; &core; 2 Duo, Quad, and Extreme processor
+ families and the &intel; &xeon; 3000, 5000, and 7000
+ sequences of processors.</para>
<para>If you have a machine based on an nVidia nForce3
Pro-150, you <emphasis>must</emphasis> use the BIOS setup to
@@ -158,13 +176,13 @@
</sect3>
<sect3>
- <title>&sparc64; Architecture</title>
+ <title>&os;/&arch.sparc64;</title>
- <para>To install &os;/&sparc64;, you will need a supported
+ <para>To install &os;/&arch.sparc64;, you will need a supported
platform (see <xref
linkend="install-hardware-supported">).</para>
- <para>You will need a dedicated disk for &os;/&sparc64;. It
+ <para>You will need a dedicated disk for &os;/&arch.sparc64;. It
is not possible to share a disk with another operating
system at this time.</para>
</sect3>
@@ -330,7 +348,7 @@
laid out on the disk, and how this affects you.</para>
<sect3 id="install-where-i386">
- <title>Disk Layouts for the &i386;</title>
+ <title>Disk Layouts for &os;/&arch.i386;</title>
<para>A PC disk can be divided into discrete chunks. These chunks are
called <firstterm>partitions</firstterm>. Since
@@ -686,7 +704,7 @@
with the architecture and the version number
which you want to install, respectively.
For example, the boot floppy images for
- &os; &rel.current;-RELEASE for &i386; are available
+ &os;/&arch.i386; &rel.current;-RELEASE are available
from <ulink url="ftp://ftp.FreeBSD.org/pub/FreeBSD/releases/i386/&rel.current;-RELEASE/floppies/"></ulink>.</para>
<para>The floppy images have a <filename>.flp</filename> extension.
@@ -3143,264 +3161,6 @@
post-installation configuration.</para>
</sect2>
- <sect2 id="network-services">
- <sect2info>
- <authorgroup>
- <author>
- <firstname>Tom</firstname>
- <surname>Rhodes</surname>
- <contrib>Contributed by </contrib>
- </author>
- </authorgroup>
- </sect2info>
- <title>Configure Additional Network Services</title>
-
- <para>Configuring network services can be a daunting
- task for new users if they lack previous
- knowledge in this area. Networking, including the Internet,
- is critical to all modern operating systems including &os;;
- as a result, it is very useful to have some understanding
- &os;'s extensive networking capabilities. Doing this
- during the installation will ensure users have some
- understanding of the various services available to them.</para>
-
- <para>Network services are programs that accept input from
- anywhere on the network. Every effort is made to make sure
- these programs will not do anything <quote>harmful</quote>.
- Unfortunately, programmers are not perfect and through time
- there have been cases where bugs in network services have been
- exploited by attackers to do bad things. It is important that
- you only enable the network services you know that you need. If
- in doubt it is best if you do not enable a network service until
- you find out that you do need it. You can always enable it
- later by re-running <application>sysinstall</application> or by
- using the features provided by the
- <filename>/etc/rc.conf</filename> file.</para>
-
- <para>Selecting the <guimenu>Networking</guimenu> option will display
- a menu similar to the one below:</para>
-
- <figure id="network-configuration">
- <title>Network Configuration Upper-level</title>
-
- <mediaobject>
- <imageobject>
- <imagedata fileref="install/net-config-menu1" format="PNG">
- </imageobject>
- </mediaobject>
- </figure>
-
- <para>The first option, <guimenuitem>Interfaces</guimenuitem>, was previously covered during
- the <xref linkend="inst-network-dev">, thus this option can
- safely be ignored.</para>
-
- <para>Selecting the <guimenuitem>AMD</guimenuitem> option adds
- support for the <acronym>BSD</acronym> automatic mount utility.
- This is usually used in conjunction with the
- <acronym>NFS</acronym> protocol (see below)
- for automatically mounting remote file systems.
- No special configuration is required here.</para>
-
- <para>Next in line is the <guimenuitem>AMD Flags</guimenuitem>
- option. When selected, a menu will pop up for you
- to enter specific <acronym>AMD</acronym> flags.
- The menu already contains a set of default options:</para>
-
- <screen>-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map</screen>
-
- <para>The <option>-a</option> option sets the default mount
- location which is specified here as
- <filename>/.amd_mnt</filename>. The <option>-l</option>
- option specifies the default <filename>log</filename> file;
- however, when <literal>syslogd</literal> is used all log
- activity will be sent to the system log daemon. The
- <filename class="directory">/host</filename> directory is used
- to mount an exported file system from a remote
- host, while <filename class="directory">/net</filename>
- directory is used to mount an exported file system from an
- <acronym>IP</acronym> address. The
- <filename>/etc/amd.map</filename> file defines the default
- options for <acronym>AMD</acronym> exports.</para>
-
- <indexterm>
- <primary>FTP</primary>
- <secondary>anonymous</secondary>
- </indexterm>
-
- <para>The <guimenuitem>Anon FTP</guimenuitem> option permits anonymous
- <acronym>FTP</acronym> connections. Select this option to
- make this machine an anonymous <acronym>FTP</acronym> server.
- Be aware of the security risks involved with this option.
- Another menu will be displayed to explain the security risks
- and configuration in depth.</para>
-
- <para>The <guimenuitem>Gateway</guimenuitem> configuration menu will set
- the machine up to be a gateway as explained previously. This
- can be used to unset the <guimenuitem>Gateway</guimenuitem> option if you accidentally
- selected it during the installation process.</para>
-
- <para>The <guimenuitem>Inetd</guimenuitem> option can be used to configure
- or completely disable the &man.inetd.8; daemon as discussed
- above.</para>
-
- <para>The <guimenuitem>Mail</guimenuitem> option is used to configure the system's
- default <acronym>MTA</acronym> or Mail Transfer Agent.
- Selecting this option will bring up the following menu:</para>
-
- <figure id="mta-selection">
- <title>Select a default MTA</title>
-
- <mediaobject>
- <imageobject>
- <imagedata fileref="install/mta-main" format="PNG">
- </imageobject>
- </mediaobject>
- </figure>
-
- <para>Here you are offered a choice as to which
- <acronym>MTA</acronym> to install
- and set as the default. An <acronym>MTA</acronym> is nothing
- more than a mail server which delivers email to users on the
- system or the Internet.</para>
-
- <para>Selecting <guimenuitem>Sendmail</guimenuitem> will install
- the popular <application>sendmail</application> server which
- is the &os; default. The <guimenuitem>Sendmail local</guimenuitem> option
- will set <application>sendmail</application> to be the default
- <acronym>MTA</acronym>, but disable its ability to receive
- incoming email from the Internet. The other options here,
- <guimenuitem>Postfix</guimenuitem> and
- <guimenuitem>Exim</guimenuitem> act similar to
- <guimenuitem>Sendmail</guimenuitem>. They both deliver
- email; however, some users prefer these alternatives to the
- <application>sendmail</application>
- <acronym>MTA</acronym>.</para>
-
- <para>After selecting an <acronym>MTA</acronym>, or choosing
- not to select an MTA, the network configuration menu will appear
- with the next option being <guimenuitem>NFS client</guimenuitem>.</para>
-
- <para>The <guimenuitem>NFS client</guimenuitem> option will
- configure the system to communicate with a server via
- <acronym>NFS</acronym>. An <acronym>NFS</acronym> server
- makes file systems available to other machines on the
- network via the <acronym>NFS</acronym> protocol. If this is
- a stand-alone machine, this option can remain unselected.
- The system may require more configuration later; see
- <xref linkend="network-nfs"> for more
- information about client and server configuration.</para>
-
- <para>Below that option is the <guimenuitem>NFS server</guimenuitem>
- option, permitting you to set the system up as an
- <acronym>NFS</acronym> server. This adds the required
- information to start up the <acronym>RPC</acronym> remote
- procedure call services. <acronym>RPC</acronym> is used to
- coordinate connections between hosts and programs.</para>
-
- <para>Next in line is the <guimenuitem>Ntpdate</guimenuitem> option,
- which deals with time synchronization. When selected, a menu
- like the one below shows up:</para>
-
- <figure id="Ntpdate-config">
- <title>Ntpdate Configuration</title>
-
- <mediaobject>
- <imageobject>
- <imagedata fileref="install/ntp-config" format="PNG">
- </imageobject>
- </mediaobject>
- </figure>
-
- <para>From this menu, select the server which is the closest
- to your location. Selecting a close one will make the time
- synchronization more accurate as a server further from your
- location may have more connection latency.</para>
-
- <para>The next option is the <acronym>PCNFSD</acronym> selection.
- This option will install the
- <filename role="package">net/pcnfsd</filename> package from
- the Ports Collection. This is a useful utility which provides
- <acronym>NFS</acronym> authentication services for systems which
- are unable to provide their own, such as Microsoft's
- &ms-dos; operating system.</para>
-
- <para>Now you must scroll down a bit to see the other
- options:</para>
-
- <figure id="Network-configuration-cont">
- <title>Network Configuration Lower-level</title>
-
- <mediaobject>
- <imageobject>
- <imagedata fileref="install/net-config-menu2" format="PNG">
- </imageobject>
- </mediaobject>
- </figure>
-
- <para>The &man.rpcbind.8;, &man.rpc.statd.8;, and
- &man.rpc.lockd.8; utilities are all used for Remote Procedure
- Calls (<acronym>RPC</acronym>).
- The <command>rpcbind</command> utility manages communication
- between <acronym>NFS</acronym> servers and clients, and is
- required for <acronym>NFS</acronym> servers to operate
- correctly. The <application>rpc.statd</application> daemon interacts
- with the <application>rpc.statd</application> daemon on other hosts to
- provide status monitoring. The reported status is usually held
- in the <filename>/var/db/statd.status</filename> file. The
- next option listed here is the <guimenuitem>rpc.lockd</guimenuitem>
- option, which, when selected, will provide file locking
- services. This is usually used with
- <application>rpc.statd</application> to monitor what hosts are
- requesting locks and how frequently they request them.
- While these last two options are marvelous for debugging, they
- are not required for <acronym>NFS</acronym> servers and clients
- to operate correctly.</para>
-
- <para>As you progress down the list the next item here is
- <guimenuitem>Routed</guimenuitem>, which is the routing daemon. The
- &man.routed.8; utility manages network routing tables,
- discovers multicast routers, and supplies a copy of the routing
- tables to any physically connected host on the network upon
- request. This is mainly used for machines which act as a
- gateway for the local network. When selected, a menu will be
- presented requesting the default location of the utility.
- The default location is already defined for you and can be
- selected with the <keycap>Enter</keycap> key. You will then
- be presented with yet another menu, this time asking for the
- flags you wish to pass on to <application>routed</application>. The
- default is <option>-q</option> and it should already appear
- on the screen.</para>
-
- <para>Next in line is the <guimenuitem>Rwhod</guimenuitem> option which,
- when selected, will start the &man.rwhod.8; daemon
- during system initialization. The <command>rwhod</command>
- utility broadcasts system messages across the network
- periodically, or collects them when in <quote>consumer</quote>
- mode. More information can be found in the &man.ruptime.1; and
- &man.rwho.1; manual pages.</para>
-
- <para>The next to the last option in the list is for the
- &man.sshd.8; daemon. This is the secure shell server for
- <application>OpenSSH</application> and it is highly recommended
- over the standard <application>telnet</application> and
- <acronym>FTP</acronym> servers. The <application>sshd</application>
- server is used to create a secure connection from one host to
- another by using encrypted connections.</para>
-
- <para>Finally there is the <guimenuitem>TCP Extensions</guimenuitem>
- option. This enables the <acronym>TCP</acronym> Extensions
- defined in <acronym>RFC</acronym> 1323 and
- <acronym>RFC</acronym> 1644. While on many hosts this can
- speed up connections, it can also cause some connections to be
- dropped. It is not recommended for servers, but may be
- beneficial for stand alone machines.</para>
-
- <para>Now that you have configured the network services, you can
- scroll up to the very top item which is <guimenuitem>Exit</guimenuitem>
- and continue on to the next configuration section.</para>
-
- </sect2>
-
>>> TRUNCATED FOR MAIL (1000 lines) <<<
More information about the p4-projects
mailing list