PERFORCE change 96727 for review
soc-andrew
soc-andrew at FreeBSD.org
Sat May 6 06:24:29 UTC 2006
http://perforce.freebsd.org/chv.cgi?CH=96727
Change 96727 by soc-andrew at soc-andrew_serv on 2006/05/06 06:23:42
IFC
Affected files ...
.. //depot/projects/soc2005/bsdinstaller/src/release/Makefile#46 integrate
.. //depot/projects/soc2005/bsdinstaller/src/release/doc/en_US.ISO8859-1/hardware/common/dev.sgml#8 integrate
.. //depot/projects/soc2005/bsdinstaller/src/release/doc/en_US.ISO8859-1/relnotes/common/new.sgml#12 integrate
.. //depot/projects/soc2005/bsdinstaller/src/release/doc/share/misc/dev.archlist.txt#11 integrate
.. //depot/projects/soc2005/bsdinstaller/src/release/doc/zh_CN.GB2312/hardware/common/dev.sgml#6 integrate
.. //depot/projects/soc2005/bsdinstaller/src/release/doc/zh_CN.GB2312/relnotes/common/new.sgml#6 integrate
Differences ...
==== //depot/projects/soc2005/bsdinstaller/src/release/Makefile#46 (text+ko) ====
@@ -1,4 +1,4 @@
-# $FreeBSD: src/release/Makefile,v 1.908 2006/03/23 07:48:58 ru Exp $
+# $FreeBSD: src/release/Makefile,v 1.909 2006/04/29 14:03:17 nyan Exp $
#
# make release [BUILDNAME=somename] CHROOTDIR=/some/dir CVSROOT=/cvs/dir \
# [RELEASETAG=tag]
@@ -1378,7 +1378,7 @@
IMAGEDIR= ${RD}/image.${FSIMAGE}
BOOTDIR= ${RD}/trees/base/boot
HINTSFILE= ${BOOTDIR}/device.hints
-ACPI_KO= ${BOOTDIR}/kernel/acpi.ko
+ACPI_KO= ${RD}/kernels/GENERIC/acpi.ko
IMAGEFILE= ${RD}/floppies/${FSIMAGE}.flp
.if defined(FDSIZE) && ${FDSIZE} == "SMALL"
FLPSIZE= ${SMALLFLOPPYSIZE}
==== //depot/projects/soc2005/bsdinstaller/src/release/doc/en_US.ISO8859-1/hardware/common/dev.sgml#8 (text+ko) ====
@@ -29,7 +29,7 @@
<sect1 id="support">
<sect1info>
- <pubdate>$FreeBSD: src/release/doc/en_US.ISO8859-1/hardware/common/dev.sgml,v 1.299 2006/04/10 20:14:40 brueffer Exp $</pubdate>
+ <pubdate>$FreeBSD: src/release/doc/en_US.ISO8859-1/hardware/common/dev.sgml,v 1.300 2006/04/28 10:45:27 brueffer Exp $</pubdate>
</sect1info>
<title>Supported Devices</title>
@@ -143,6 +143,8 @@
&hwlist.pst;
+ &hwlist.rr232x;
+
&hwlist.stg;
&hwlist.sym;
==== //depot/projects/soc2005/bsdinstaller/src/release/doc/en_US.ISO8859-1/relnotes/common/new.sgml#12 (text+ko) ====
@@ -3,7 +3,7 @@
<corpauthor>The &os; Project</corpauthor>
- <pubdate>$FreeBSD: src/release/doc/en_US.ISO8859-1/relnotes/common/new.sgml,v 1.911 2006/04/10 20:30:35 brueffer Exp $</pubdate>
+ <pubdate>$FreeBSD: src/release/doc/en_US.ISO8859-1/relnotes/common/new.sgml,v 1.918 2006/04/30 05:22:43 hrs Exp $</pubdate>
<copyright>
<year>2000</year>
@@ -151,39 +151,47 @@
For more details see security advisory <ulink
url="ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/advisories/FreeBSD-SA-06:07.pf.asc">FreeBSD-SA-06:07.pf</ulink>. &merged;</para>
+ <para arch="i386,amd64">An information disclosure issue found in the
+ &os; kernel running on 7th- and 8th-generation AMD processors
+ has been fixed. For more details see security advisory <ulink
+ url="ftp://ftp.FreeBSD.org/pub/FreeBSD/CERT/advisories/FreeBSD-SA-06:14.fpu.asc">FreeBSD-SA-06:14.fpu</ulink>. &merged;</para>
+
</sect2>
<sect2 id="kernel">
<title>Kernel Changes</title>
- <para>&man.acpi.4; now has basic support for HPET time counter.</para>
+ <para>&man.acpi.4; now has basic support for the HPET time counter.</para>
- <para>&man.acpi.ibm.4; driver now supports for setting the fan control
+ <para>The &man.acpi.ibm.4; driver now supports setting the fan control
mode to manual or automatic, and adjusting the fan speed if the
- fan control mode is manual. Note that manual control of the fan speed
- needs to set a sysctl variable
- <varname>dev.acpi_ibm.<replaceable>0</replaceable>.fan</varname>
- to zero (manual) with extreme precaution.
- This is because disabling automatic fan control might
+ fan control mode is manual. To enable manual control of the fan speed,
+ the sysctl variable <varname>dev.acpi_ibm.<replaceable>0</replaceable>.fan</varname>
+ needs to be set to zero (manual). This should only be used with
+ extreme precaution, as disabling automatic fan control might
overheat the hardware and lead to permanent damage.</para>
- <para>The &man.ddb.4; now supports <literal>show lock</literal>
+ <para>The &man.ddb.4; debugger now provides the <literal>show lock</literal>
command. If the argument has a valid lock class,
this displays various information about the lock and calls a
new function pointer in lock_class (lc_ddb_show) to dump class-specific
information about the lock as well (such as the owner of a mutex or
- xlock'ed sx lock).</para>
+ xlock'ed sx lock). &merged;</para>
- <para>The &man.ddb.4; now supports <literal>show sleepq</literal>
+ <para>The &man.ddb.4; debugger now provides the <literal>show sleepq</literal>
command. This takes a wait channel as an argument and looks
for a sleep queue associated with that wait channel.</para>
+ <para><filename>DEFAULTS</filename> kernel configuration files
+ for each platform have been added. &merged;</para>
+
<para>A bug in file descriptor handling such that simple
- <literal>close(0); dup(fd)</literal> does not return
+ <literal>close(0); dup(fd)</literal> sequence does not return
descriptor <literal>0</literal> in some cases, has been fixed.</para>
<para>The &man.firmware.9; subsystem has been added. This allows
- to load binary data into the kernel via a specially crafted module.</para>
+ to load binary data into the kernel via a specially crafted module.
+ &merged;</para>
<para>The &man.gdb.1; remote debugging interface now supports
copying console messages to a remote debugger instance.
@@ -200,17 +208,24 @@
&man.pmcstat.8; can now log over a network socket
to a remote host.</para>
- <para>The &man.random.4; entropy device driver is now MPSAFE.</para>
+ <para>The &man.random.4; entropy device driver is now MPSAFE.
+ &merged;</para>
<para>The <literal>SIGCHLD</literal> signal queuing has been
added. For each child process whose status has been changed,
- a SIGCHLD instance is queued, if the signal is stilling pending,
- and process changed status several times, signal information
- is updated to reflect latest process status.
+ a SIGCHLD instance is queued. If the signal is still pending,
+ and the process changed status several times, the signal information
+ is updated to reflect the latest process status.
There is a loader tunable <varname>kern.sigqueue.queue_sigchild</varname>
which can control the behavior, setting it to zero disables the
<literal>SIGCHLD</literal> queuing feature.</para>
+ <para arch="amd64,i386">Instead of dumping the whole physical
+ memory, the kernel now defaults to dump only pages that are
+ actively mapped into kvm. A new sysctl variable
+ <varname>debug.minidump</varname>
+ can be used to turn off this behavior when set to zero.</para>
+
<para>A new sysctl variable <varname>kern.malloc_stats</varname>
has been added. This allows to export kernel malloc
statistics via a binary structure stream.</para>
@@ -224,27 +239,28 @@
<para>A new sysctl variable <varname>kern.elf[32|64].can_exec_dyn</varname>
has been removed. Instead the <varname>brandinfo</varname>
- structure has been extended to be able to have
+ structure has been extended to be able to provide the
<literal>BI_CAN_EXEC_DYN</literal> flag for all brands that usually
allow executing ELF dynamic binaries.</para>
<para>A new sysctl variable <varname>kern.forcesigexit</varname>
has been added. This forces a process
- to sigexit if a trap signal is being hold by current thread or
- ignored by current process and is enabled by default.</para>
+ to sigexit if a trap signal is being held by the current thread or
+ ignored by the current process and is enabled by default.</para>
- <para>RedZone, a buffer corruption protection for kernel's &man.malloc.9;
- has been implemented. This detects both of buffer underflows and
+ <para>RedZone, a buffer corruption protection for kernel &man.malloc.9;
+ facility has been implemented. This detects both of buffer underflows and
buffer overflows bugs at runtime on &man.free.9; and &man.realloc.9;,
and prints backtraces from where memory was allocated and from where
- it was freed. For more details, see &man.redzone.9; manual page.</para>
+ it was freed. For more details, see the &man.redzone.9; manual page.</para>
<para>A new sysctl variable <varname>security.mac.biba.interfaces_equal</varname>
which makes all network interfaces be created with the label
<literal>biba/equal(equal-equal)</literal>, has been added.
This is useful where programs such as &man.dhclient.8; and &man.ppp.8;.
which initialize network interfaces do not have any labeling support.
- This variable is set as <literal>0</literal>(disabled) by default.</para>
+ This variable is set as <literal>0</literal>(disabled) by default.
+ &merged;</para>
<para>A new sysctl variable <varname>vm.zone_stats</varname>
has been added. This allows to export &man.uma.9; allocator
@@ -276,9 +292,6 @@
has been added. For details of the latest development,
see <ulink url="http://xbox-bsd.nl"></ulink>.</para>
- <para><filename>DEFAULTS</filename> kernel configuration files
- for each platform have been added.</para>
-
<sect3 id="boot">
<title>Boot Loader Changes</title>
@@ -295,7 +308,7 @@
then the default speed is determined from the current serial port
speed, and otherwise it is set to 9600 or the value of
the kernel option <literal>BOOT_COMCONSOLE_SPEED</literal>
- at compile time.</para>
+ at compile time. &merged;</para>
<!-- Above this line, order boot loader changes by keyword-->
@@ -305,13 +318,14 @@
<title>Hardware Support</title>
<para>The &man.acpi.thermal.4; driver now supports
- passive cooling.</para>
+ passive cooling. &merged;</para>
<para>The &man.cardbus.4; driver now supports
<filename>/dev/cardbus<replaceable>%d</replaceable>.cis</filename>.</para>
- <para>The &man.ce.4; driver, which supports Cronyx Tau-PCI/32 adapters,
- has been added.</para>
+ <para arch="i386,pc98">The &man.ce.4; driver,
+ which supports Cronyx Tau-PCI/32 adapters, has been added.
+ &merged;</para>
<para>Support for the PadLock Security Co-processor in VIA C3
processors has been added to the &man.crypto.9; subsystem.
@@ -326,24 +340,28 @@
standard designed to enable remote monitoring and control of server,
networking and telecommunication platforms.</para>
- <para>The &man.kbdmux.4; has been integrated into &man.syscons.4; and
- <devicename>kbd</devicename> device driver.
+ <para>The &man.kbdmux.4; driver has been integrated into &man.syscons.4; and
+ the <devicename>kbd</devicename> device driver.
By default &man.syscons.4; will look for the &man.kbdmux.4;
keyboard first, and then, if not found, look for any keyboard.
- Switch to &man.kbdmux.4; can be done at boot time by loading
- <literal>kbdmux</literal> kernel module via &man.loader.8;,
+ Switching to &man.kbdmux.4; can be done at boot time by loading
+ the <literal>kbdmux</literal> kernel module via &man.loader.8;,
or at runtime via &man.kldload.8; and releasing the active
- keyboard.</para>
+ keyboard. &merged;</para>
- <para arch="amd64,i386">The &man.kbdmux.4; has been included in the
+ <para arch="amd64,i386">The &man.kbdmux.4; driver has been included in the
<filename>GENERIC</filename> kernel by default.
Also, the <quote>Boot FreeBSD with USB keyboard</quote>
menu item in the boot loader menu has been removed
- since this fixes USB keyboard probing problems.</para>
+ since this fixes USB keyboard probing problems.
+ &merged;</para>
<para arch="ia64">The loader tunable <varname>debug.mpsafevfs</varname>
is set to <literal>1</literal> by default.</para>
+ <para>The &man.sab.4; driver has been removed (it has been
+ superceded by the &man.scc.4; driver).</para>
+
<para>The &man.scc.4; driver has been added.
This provides generic support for serial communications
controllers and delegates the control over each channel
@@ -370,32 +388,42 @@
to need this even though all of the pins in the 8259A's are masked.
The default is still to mask the ExtINT pin.</para>
+ <para arch="i386">Support has been improved for
+ so-called <quote>legacy-free</quote> hardware, in particular,
+ i386 systems without AT-style keyboard controllers such as the
+ Macbook Pro.</para>
+
<sect4 id="mm">
<title>Multimedia Support</title>
- <para>The &man.agp.4; driver now supports ATI IGP chipsets.</para>
+ <para>The &man.agp.4; driver now supports ATI IGP chipsets.
+ &merged;</para>
<para>The &man.sound.4; driver now supports
wider range sampling rate, multiple precisions choice,
- and 24/32 bit PCM format conversion.</para>
+ and 24/32 bit PCM format conversion. &merged;</para>
- <para>The &man.snd.als4000.4; driver is now MPSAFE.</para>
+ <para>The &man.snd.als4000.4; driver is now MPSAFE. &merged;</para>
<para>The &man.snd.atiixp.4; driver has been added.
- This supports ATI IXP 200/300/400 series audio controllers.</para>
+ This supports ATI IXP 200/300/400 series audio controllers. &merged;</para>
<para>The &man.snd.atiixp.4; driver now supports
suspend and resume features.</para>
<para>The &man.snd.cmi.4; driver is now MPSAFE.</para>
- <para>The &man.snd.solo.4; driver is now MPSAFE.</para>
+ <para>The &man.snd.es137x.4; driver is now MPSAFE. &merged;</para>
+
+ <para>The &man.snd.ich.4; driver is now MPSAFE. &merged;</para>
+
+ <para>The &man.snd.solo.4; driver is now MPSAFE. &merged;</para>
- <para>The &man.snd.via8233.4; driver is now MPSAFE.</para>
+ <para>The &man.snd.via8233.4; driver is now MPSAFE. &merged;</para>
- <para>The &man.snd.via82c686.4; driver is now MPSAFE.</para>
+ <para>The &man.snd.via82c686.4; driver is now MPSAFE. &merged;</para>
- <para arch="amd64">The &man.speaker.4; driver now supports &os;/amd64.</para>
+ <para arch="amd64">The &man.speaker.4; driver now supports &os;/amd64. &merged;</para>
<para>The &man.uaudio.4; driver now supports 24/32 bit audio
formats and conversion.</para>
@@ -405,17 +433,23 @@
<title>Network Interface Support</title>
<para>The &man.ath.4; driver has been updated to
- version 0.9.16.16.</para>
+ version 0.9.16.16. &merged;</para>
<para arch="i386,amd64">The &man.bce.4; driver, which supports Broadcom
NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet controllers,
- has been added. For more details, see &man.bce.4;.</para>
+ has been added. For more details, see &man.bce.4;. &merged;</para>
+
+ <para>A bug which prevents the &man.bfe.4; driver from working
+ on a system with over 1GB RAM has been fixed. &merged;</para>
<para>The &man.bge.4; driver's Jumbo frame support is now MPSAFE.</para>
<para>The &man.bge.4; driver now supports big-endian
architectures such as sparc64.</para>
+ <para>The &man.bge.4; driver now supports &man.polling.4; mode.
+ &merged;</para>
+
<para>The &man.dc.4; driver is now MPSAFE. &merged;</para>
<para>The &man.de.4; driver has been converted to the &man.bus.dma.9;
@@ -426,7 +460,7 @@
<para>The &man.el.4; driver has been removed.</para>
<para>The &man.em.4; driver now supports big-endian
- architectures such as sparc64.</para>
+ architectures such as sparc64. &merged;</para>
<para>The &man.em.4; driver has been updated to
version 3.2.18 from Intel, and now supports
@@ -445,11 +479,13 @@
architectures such as sparc64.</para>
<para>The &man.le.4; driver, which supports AMD Am7900 LANCE
- and Am79C9xx PCnet NICs and is based on NetBSD's implementation
- has been added. While the &man.lnc.4; driver also support these
+ and Am79C9xx PCnet NICs and is based on NetBSD's implementation,
+ has been added. While the &man.lnc.4; driver also supports these
NICs, this driver has several advantages over it such as
MPSAFE, ALTQ, VLAN_MTU, ifmedia, and 32-bit DMA for PCI
- variants.</para>
+ variants. &merged;</para>
+
+ <para>The &man.lge.4; driver is now MPSAFE. &merged;</para>
<para>The &man.my.4; driver is now MPSAFE. &merged;</para>
@@ -468,6 +504,8 @@
<para>The &man.sf.4; driver is now MPSAFE. &merged;</para>
+ <para>The &man.sk.4; driver is now MPSAFE.</para>
+
<para>The &man.ste.4; driver is now MPSAFE.</para>
<para>The &man.ti.4; driver now supports big-endian
@@ -497,12 +535,12 @@
suppression, while there is demand for such ARP entry.
Due to this change, a sysctl variable
<varname>net.link.ether.inet.host_down_time</varname>
- has been removed.</para>
+ has been removed. &merged;</para>
<para>The &man.arp.8; now supports a sysctl variable
<varname>net.link.ether.inet.log_arp_permanent_modify</varname>
to suppress logging of attempts to modify
- permanent ARP entries.</para>
+ permanent ARP entries. &merged;</para>
<para>The &man.arp.8; utility now allows <option>-i</option>
option with <option>-d</option> and <option>-a</option> options
@@ -520,34 +558,35 @@
<para>The &man.if.bridge.4; bridge driver now supports
creating span ports, which transmit a copy of every frame
received by the bridge. This feature can be enabled
- by using &man.ifconfig.8;.</para>
+ by using &man.ifconfig.8;. &merged;</para>
<para>The &man.if.bridge.4; bridge driver now supports
RFC 3378 EtherIP. This change makes it possible to
add &man.gif.4; interfaces to bridges, which will then
send and receive IP protocol 97 packets.
- Packets are Ethernet frames with an EtherIP header prepended.</para>
+ Packets are Ethernet frames with an EtherIP header prepended.
+ &merged;</para>
<para>The path MTU discovery for multicast packets in the &os;
&man.ip6.4; stack has been disabled by default because
notifying path MTU by a lot of routers in multicast
can be a kind of distributed Denial-of-Service attack to a router.
- This feature can be enabled by using a new sysctl variable
- <varname>net.inet6.ip6.mcast_pmtu</varname>.</para>
+ This feature can be re-enabled by using a new sysctl variable
+ <varname>net.inet6.ip6.mcast_pmtu</varname>. &merged;</para>
- <para>The &man.ipfw.4;, IP packet filter now supports IPv6.
- The &man.ip6fw.8; is deprecated and will be removed
- in the future releases.</para>
+ <para>The &man.ipfw.4; IP packet filter now supports IPv6.
+ The &man.ip6fw.8; packet filter is deprecated and will be removed
+ in the future releases. &merged;</para>
<para>The &man.ipfw.4; now supports substitution of the action
argument with the value obtained from table lookup,
- which allows to optimize the rulesets.
+ which allows some optimization of rulesets.
This is now applicable only to <literal>pipe</literal>,
<literal>queue</literal>,
<literal>divert</literal>,
<literal>tee</literal>,
<literal>netgraph</literal>,
- and <literal>ngtee</literal> rules.
+ and <literal>ngtee</literal> rules. &merged;
For example, the following rules will throw different
packets to different pipes:</para>
@@ -564,9 +603,12 @@
to <varname>net.bpf_jitter.enable</varname> and this controls
both &man.bpf.4; and &man.ng.bpf.4; now.</para>
- <para>A bug where a connection of NFS over TCP would not reconnect
- when the server sent FIN. This problem had occurred
- with Solaris NFS servers.</para>
+ <para>The &man.ng.iface.4; Netgraph node now supports &man.altq.4;.
+ &merged;</para>
+
+ <para>A bug has been fixed in which NFS over TCP would not reconnect
+ when the server sent a FIN. This problem had occurred
+ with Solaris NFS servers. &merged;</para>
<para>The sysctl variable <varname>net.inet.ip.portrange.reservedhigh</varname>
and <varname>net.inet.ip.portrange.reservedlow</varname>
@@ -620,7 +662,7 @@
tick granularity. A new sysctl variable
<varname>net.inet.tcp.inflight.rttthresh</varname> specifies
the threshold in milliseconds below which this feature
- will disengage. It defaults to 10ms.</para>
+ will disengage. It defaults to 10ms. &merged;</para>
</sect3>
<sect3 id="disks">
@@ -633,23 +675,28 @@
and now supports full 64-bit DMA. While this feature is
enabled by default, this can be forced off by setting the
<varname>hw.amr.force_sg32</varname> loader tunable for
- debugging purpose.</para>
+ debugging purpose.
+ &merged;</para>
<para>The &man.amr.4; driver now supports &man.ioctl.2; requests
necessary for Linux LSI MegaRaid tools on &os;'s Linux emulation
- environment.</para>
+ environment.
+ &merged;</para>
<para>The &man.ata.4; driver now supports a workaround
for some controllers whose DMA does not work properly
in 48bit mode. For the suspicious controllers
- the PIO mode will be used for access to over 137GB areas.</para>
+ the PIO mode will be used for access to over 137GB areas.
+ &merged;</para>
<para>The &man.ata.4; driver now supports the ITE IT8211F IDE controller,
and Promise PDC40718 and PDC40719 chip found in Promise
- Fasttrak TX4300.</para>
+ Fasttrak TX4300.
+ &merged;</para>
<para>The &man.ata.4; driver now supports DMA for kernel crash dump
- and crash dumping to &man.ataraid.4; device.</para>
+ and crash dumping to &man.ataraid.4; device.
+ &merged;</para>
<para>The &man.ata.4; driver now supports USB mass storage class
devices. To enable it, a line <literal>device atausb</literal>
@@ -659,10 +706,14 @@
each other.</para>
<para>The &man.ataraid.4; driver now supports
- JMicron ATA RAID metadata.</para>
+ JMicron ATA RAID metadata. &merged;</para>
+
+ <para>The <literal>GEOM_LABEL</literal> class now supports
+ Ext2FS, NTFS, and ReiserFS. &merged;</para>
<para>The <literal>GEOM_MIRROR</literal> class now supports
- kernel crash dump to the GEOM providers.</para>
+ kernel crash dump to the GEOM providers.
+ &merged;</para>
<para>The <literal>GEOM_MIRROR</literal> and <literal>GEOM_RAID3</literal>
classes now support sysctl variables
@@ -674,11 +725,12 @@
behavior, and if it is set to <literal>0</literal> such components
are not disconnected and the kernel will try to still use them
(only first error will be logged).
- This is helpful when we have two broken components, but in
- different places, so actually all data is available.
+ This is helpful for the case of multiple broken components (in
+ different places), so actually all data is available.
The broken components will be visible in <command>gmirror list</command>
or <command>graid3 list</command> output with flag
- <literal>BROKEN</literal>.</para>
+ <literal>BROKEN</literal>.
+ &merged;</para>
<para>The <literal>GEOM_MIRROR</literal> and <literal>GEOM_RAID3</literal>
classes now use parallel I/O request for synchronization
@@ -691,18 +743,17 @@
<varname>kern.geom.mirror.syncs_per_sec</varname>,
<varname>kern.geom.raid3.reqs_per_sync</varname>, and
<varname>kern.geom.raid3.syncs_per_sec</varname>
- are deprecated and have been removed.</para>
+ are deprecated and have been removed.
+ &merged;</para>
<para>A new GEOM class <literal>GEOM_ZERO</literal> has been added.
It creates very huge provider (41PB) <filename>/dev/gzero</filename>
and mainly for performance testing.
On <literal>BIO_READ</literal> request it zero-fills
<varname>bio_data</varname> and on <literal>BIO_WRITE</literal>
- it does nothing.</para>
+ it does nothing.
+ &merged;</para>
- <para>The <literal>GEOM_LABEL</literal> class now supports
- Ext2FS and ReiserFS.</para>
-
<para>The GEOM class kernel module <filename>g_md.ko</filename>
has been renamed to <filename>geom_md.ko</filename>
for consistency.</para>
@@ -711,7 +762,8 @@
amd64 as well as PAE.</para>
<para>The &man.mfi.4; driver, which supports
- LSI MegaRAID SAS controller family has been added.</para>
+ the LSI MegaRAID SAS controller family, has been added.
+ &merged;</para>
<para>The &man.mpt.4; driver has been updated to support
various new features such as RAID volume and RAID member
@@ -723,8 +775,8 @@
<para>The &man.mpt.4; driver now supports SAS HBA (partially),
64-bit PCI, and large data transfer.</para>
- <para>The &man.twa.4; has been updated to the 9.3.0.1
- release on the 3ware website.</para>
+ <para>The &man.twa.4; driver has been updated to the 9.3.0.1
+ release on the 3ware Web site. &merged;</para>
<para>A new GEOM-based disk encryption facility, GEOM_ELI, has been
added. It uses the &man.crypto.9; framework for hardware acceleration
@@ -732,7 +784,8 @@
more information. &merged;</para>
<para>The &man.geli.8; now supports loading keyfiles before root
- file system is mounted. For example, the following entries
+ file system is mounted. &merged;
+ For example, the following entries
can be used in <filename>/boot/loader.conf</filename> to enable
it:</para>
@@ -776,7 +829,7 @@
has been updated to 20051021.</para>
<para><application>DRM</application> has
- been updated to a snapshot from DRI CVS as of 20051202.</para>
+ been updated to a snapshot from DRI CVS as of 20051202. &merged;</para>
<para>TrustedBSD <application>OpenBSM</application> distribution,
version 1.0 alpha 5, an implementation of the documented Sun Basic
@@ -811,22 +864,24 @@
applying binary patches.</para>
<para>The &man.bsnmpd.1; utility now supports the Host Resources
- MIB described in RFC 2790.</para>
+ MIB described in RFC 2790. &merged;</para>
<para>The &man.cmp.1; utility now supports an <option>-h</option>
flag to compare the symbolic link itself rather than the
file that the link points to.</para>
- <para>The &man.config.8; utility now supports <literal>nocpu</literal>
- directive.</para>
+ <para>The &man.config.8; utility now supports the <literal>nocpu</literal>
+ directive, which cancels the effect of a
+ previous <literal>cpu</literal> directive. &merged;</para>
<para>The &man.config.8; utility now reads <filename>DEFAULTS</filename>
kernel configuration file if it exists in the current directory
- before the specified configuration file.</para>
+ before the specified configuration file. &merged;</para>
<para>The &man.csh.1; utility now supports NLS catalog.
Note that this requires installing
- <filename role="package">shells/tcsh_nls</filename>.</para>
+ the <filename role="package">shells/tcsh_nls</filename> port.
+ &merged;</para>
<para>The csup(1) utility has been imported.
This is an implementation of CVSup-compatible client written
@@ -834,11 +889,11 @@
only.</para>
<para>The &man.devd.8; utility now supports a <option>-f</option> option
- to specify a configuration file.</para>
+ to specify a configuration file. &merged;</para>
<para>The &man.ftpd.8; utility now creates a PID file
<filename>/var/run/ftpd.pid</filename> even when
- no <option>-p</option> option is specified.</para>
+ no <option>-p</option> option is specified. &merged;</para>
<para>The &man.gbde.8; utility now supports
<option>-k</option> and <option>-K</option> options
@@ -846,13 +901,14 @@
<para>The &man.getfacl.1; utility now supports
a <option>-q</option> flag to suppress the per-file header
- comment listing the file name, owner, and group.</para>
+ comment listing the file name, owner, and group.
+ &merged;</para>
<para>The &man.gpt.8; utility now supports setting GPT partition labels.</para>
<para>The &man.gvinum.8; utility now supports commands
to rename objects and to move a subdisk from
- one drive to another.</para>
+ one drive to another. &merged;</para>
<para>The &man.gvinum.8; utility now supports
<command>resetconfig</command> sub-command.</para>
@@ -882,14 +938,14 @@
<replaceable>jid_file</replaceable></option> option to
write out a JidFile, similar to a PidFile, containing
the jailid, path, hostname, IP and the command used to start
- the jail.</para>
+ the jail. &merged;</para>
- <para>The &man.kdump.1; now supports a <option>-H</option>
+ <para>The &man.kdump.1; utility now supports a <option>-H</option>
flag, which causes kdump to print an additional field holding
- the threadid.</para>
+ the threadid. &merged;</para>
- <para>The &man.kdump.1; now supports a <option>-s</option>
- flag to suppress the display of I/O data.</para>
+ <para>The &man.kdump.1; program now supports a <option>-s</option>
+ flag to suppress the display of I/O data. &merged;</para>
<para>The &man.kenv.1; utility now supports a <option>-q</option>
flag to suppress warnings.</para>
@@ -922,15 +978,17 @@
<para>The &man.ln.1; utility now supports
an <option>-F</option> flag which allows to delete existing
- empty directories, when creating symbolic links.</para>
+ empty directories, when creating symbolic links.
+ &merged;</para>
<para>The &man.locate.1; utility now supports
a <option>-0</option> flag to make this utility
- interoperable with &man.xargs.1;'s <option>-0</option> flag.</para>
+ interoperable with &man.xargs.1;'s <option>-0</option> flag.
+ &merged;</para>
<para>The &man.ls.1; utility now supports
an <option>-I</option> flag to disable the automatic
- <option>-A</option> flag for the superuser.</para>
+ <option>-A</option> flag for the superuser. &merged;</para>
<para>The &man.ls.1; utility now supports
an <option>-U</option> flag to use the file creation
@@ -960,16 +1018,18 @@
<para>The &man.mergemaster.8; utility now supports
an <option>-A</option> option to explicitly specify
- an architecture to pass through to the underlying makefiles.</para>
+ an architecture to pass through to the underlying makefiles.
+ &merged;</para>
<para>The &man.mount.8; <literal>nodev</literal> option has
been removed.</para>
<para>The &man.mount.8; now supports &man.mqueuefs.5;.</para>
- <para>The &man.moused.8; now supports an <option>-H</option> flag
+ <para>The &man.moused.8; daemon now supports an <option>-H</option> flag
to enable horizontal virtual scrolling similar to a
- <option>-V</option> flag for vertical virtual scrolling.</para>
+ <option>-V</option> flag for vertical virtual scrolling.
+ &merged;</para>
<para>The &man.netstat.1; utility now supports an
<option>-h</option> flag for interface stats mode,
@@ -981,16 +1041,16 @@
rather than the KAME IPSEC stack.
Note that the output of <command>netstat -s -p ipsec</command>
differs depending on which stack is compiled into
- the kernel since they each keep different stats.</para>
+ the kernel since they each keep different statistics. &merged;</para>
<para>The &man.periodic.8; daily script now supports
- to show the status of &man.gmirror.8;, &man.graid3.8;,
+ display of the status of &man.gmirror.8;, &man.graid3.8;,
&man.gstripe.8;, and &man.gconcat.8; devices.
- Note that these are disabled by default.</para>
+ Note that these are disabled by default. &merged;</para>
- <para>A new functions, &man.pidfile.3;, which allow reliable
- pidfiles handling have been implemented in
- <filename>libutil</filename>.</para>
+ <para>A new function, &man.pidfile.3;, which provides reliable
+ pidfiles handling, has been implemented in
+ <filename>libutil</filename>. &merged;</para>
<para>The &man.ping.8; utility now supports <quote>a sweeping
ping</quote> in which &man.icmp.4; payload of
@@ -1020,7 +1080,7 @@
<para>The &man.rfcomm.sppd.1; now supports service name
in addition to <option>-c</option> option with channel number.
The supported names are: DUN (Dial-Up Networking), FAX (Fax),
- LAN (LAN Access Using PPP), and SP (Serial Port).</para>
+ LAN (LAN Access Using PPP), and SP (Serial Port). &merged;</para>
<para>The &man.rpcgen.1; utility now generates headers and stub files
which can be used with ANSI C compilers by default.</para>
@@ -1036,9 +1096,12 @@
<para>The &man.sh.1; utility now supports <literal>times</literal>
built-in command.</para>
+ <para>The &man.snapinfo.8; utility, which shows snapshot locations
+ on UFS filesystems, has been added. &merged;</para>
+
<para>The &man.strtonum.3; library function has been implemented
based on OpenBSD's implementation. This is an improved version of
- &man.strtoll.3;.</para>
+ &man.strtoll.3;. &merged;</para>
<para>The &man.sysctl.8; utility now supports a <option>-q</option>
flag to suppress a limited set of warnings and errors.</para>
@@ -1055,7 +1118,7 @@
<para>The &man.xargs.1; utility now supports a <option>-r</option>
flag which makes the command execution when the standard input
- does not contain any non-whitespace-characters.</para>
+ does not contain any non-whitespace-characters. &merged;</para>
<para>The shared library version number of all libraries have
been updated due to some possible ABI changes. The libraries
@@ -1089,7 +1152,7 @@
<filename>/etc/bluetooth/<replaceable>$device</replaceable>.conf</filename>
(where <replaceable>$device</replaceable> is <devicename>ubt0</devicename>,
<devicename>btcc0</devicename>, and so on.)
- For more details, see &man.bluetooth.conf.5;.</para>
+ For more details, see &man.bluetooth.conf.5;. &merged;</para>
<para>The <filename>ftpd</filename> script for
stand-alone &man.ftpd.8; has been added.</para>
@@ -1114,15 +1177,16 @@
are attached to the system, but both daemons depend on
Bluetooth socket layer and thus disabled by default.
Bluetooth sockets layer must be either loaded
- as a module or compiled into kernel before the daemons can run.</para>
+ as a module or compiled into kernel before the daemons can run.
+ &merged;</para>
<para>The <filename>hostapd</filename> script for
- &man.hostapd.8; has been added.</para>
+ &man.hostapd.8; has been added. &merged;</para>
<para>The <filename>netif</filename> script now supports
<varname>ipv4_addrs_<replaceable>ifn</replaceable></varname>,
which adds one or more IPv4 address from a ranged list in
- CIRD notation. For example:</para>
+ CIRD notation. &merged; For example:</para>
<programlisting>ipv4_addrs_ed0="192.168.0.1/24 192.168.1.1-5/28"</programlisting>
@@ -1139,7 +1203,7 @@
since OLDCARD is deprecated.</para>
<para>The <filename>ppp-user</filename> script has been renamed to
- <filename>ppp</filename>.</para>
+ <filename>ppp</filename>. &merged;</para>
<para>The <varname>removable_interfaces</varname> variable
has been removed.</para>
@@ -1166,6 +1230,10 @@
<para><application>GNU Readline library</application>
has been updated from 5.0 to 5.1.</para>
+ <para><application>GNU Troff</application>
+ has been updated from version 1.19 to version 1.19.2.
+ &merged;</para>
+
<para><application>IPFilter</application> has been updated from
4.1.8 to 4.1.10.</para>
@@ -1173,7 +1241,8 @@
4.2p1 to 4.3p1.</para>
<para><application>hostapd</application>
- has been updated from version 0.3.9 to version 0.4.8.</para>
+ has been updated from version 0.3.9 to version 0.4.8.
+ &merged;</para>
<para><application>sendmail</application> has been updated from
8.13.4 to 8.13.6. &merged;</para>
@@ -1183,7 +1252,8 @@
<application>tzdata2005r</application> release. &merged;</para>
<para><application>WPA Supplicant</application>
- has been updated from version 0.3.9 to version 0.4.8.</para>
+ has been updated from version 0.3.9 to version 0.4.8.
+ &merged;</para>
<para><application>zlib</application>
has been updated from version 1.2.2 to version 1.2.3.</para>
@@ -1196,36 +1266,38 @@
flag to disable checking whether the same package is already
installed or not.</para>
- <para>The &man.pkg.add.1; now supports an <option>-P</option>
+ <para>The &man.pkg.add.1; program now supports an <option>-P</option>
flag, which is the same as the <option>-p</option> flag
except that the given prefix is also used recursively for the
- dependency packages if any.</para>
+ dependency packages if any. &merged;</para>
- <para>The &man.pkg.add.1; and &man.pkg.create.1; now supports
+ <para>The &man.pkg.add.1; and &man.pkg.create.1; utilities now support
a <option>-K</option> flag to save packages to the current directory
- (or <varname>PKGDIR</varname> if defined) by default.</para>
+ (or <varname>PKGDIR</varname> if defined) by default.
+ &merged;</para>
- <para>The &man.pkg.create.1; now supports an <option>-x</option>
+ <para>The &man.pkg.create.1; program now supports an <option>-x</option>
flag to support basic regular expressions for package name,
an <option>-E</option> flag for extended regular
- expressions, and a <option>-G</option> for exact matching.</para>
+ expressions, and a <option>-G</option> for exact matching. &merged;</para>
- <para>The &man.pkg.version.1; now supports an <option>-o</option>
+ <para>The &man.pkg.version.1; utility now supports an <option>-o</option>
flag to show the origin recorded on package generation
instead of the package name, and an <option>-O</option> flag
- to list packages whose registered origin is origin only.</para>
+ to list packages whose registered origin is origin only.
+ &merged;</para>
<para>The &man.portsnap.8; utility (<filename>sysutils/portsnap</filename>)
has been added into the &os; base system. This is a secure,
easy to use, fast, lightweight, and generally good way for
- users to keep their ports trees up to date.</para>
+ users to keep their ports trees up to date. &merged;</para>
<para>A incorrect handling of <varname>HTTP_PROXY_AUTH</varname>
- in the &man.portsnap.8; utility has been fixed.</para>
+ in the &man.portsnap.8; utility has been fixed. &merged;</para>
<para>The startup scripts from the <varname>local_startup</varname>
directory now evaluated by using &man.rcorder.8; with scripts
- in the base system.</para>
+ in the base system. &merged;</para>
<para>The suffix of startup scripts from the Ports Collection
has been removed. This means <filename>foo.sh</filename>
@@ -1234,19 +1306,20 @@
<filename>foo.ORG</filename> will also be invoked.
You are recommended to reinstall packages which install
such scripts and remove extra files in the
- <varname>local_startup</varname> directory.</para>
+ <varname>local_startup</varname> directory. &merged;</para>
<para>New <filename>rc.conf</filename> variables,
<varname>ldconfig_local_dirs</varname> and
<varname>ldconfig_local32_dirs</varname> have been added.
- These hold lists of local &man.ldconfig.8; directories.</para>
+ These hold lists of local &man.ldconfig.8; directories.
+ &merged;</para>
<para>The <command>@cwd</command> command in
<filename>pkg-plist</filename> now allows
no directory argument. If no
directory argument is given, it will set current
working directory to the first prefix given by the
- <command>@cwd</command> command.</para>
+ <command>@cwd</command> command. &merged;</para>
</sect2>
<sect2 id="releng">
==== //depot/projects/soc2005/bsdinstaller/src/release/doc/share/misc/dev.archlist.txt#11 (text+ko) ====
@@ -23,7 +23,7 @@
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
-# $FreeBSD: src/release/doc/share/misc/dev.archlist.txt,v 1.81 2006/04/10 20:14:40 brueffer Exp $
+# $FreeBSD: src/release/doc/share/misc/dev.archlist.txt,v 1.83 2006/04/28 10:45:28 brueffer Exp $
#
#
@@ -99,12 +99,13 @@
pcn i386,pc98,alpha,ia64,amd64
pst i386
rc i386
+rr232x i386,amd64
rue i386,pc98,amd64
safe i386,pc98,amd64
sbp i386,sparc64,ia64,amd64
sf i386,pc98,alpha,ia64,amd64
sis i386,pc98,alpha,ia64,amd64
-sk i386,pc98,alpha,amd64
+sk i386,sparc64,pc98,alpha,amd64
sn i386,amd64
snc pc98
snd_ad1816 i386,amd64
==== //depot/projects/soc2005/bsdinstaller/src/release/doc/zh_CN.GB2312/hardware/common/dev.sgml#6 (text+ko) ====
@@ -1,7 +1,7 @@
<!--
The FreeBSD Simplified Chinese Project
- Original Revision: 1.296
+ Original Revision: 1.299
-->
<!--
@@ -35,7 +35,7 @@
<sect1 id="support">
<sect1info>
- <pubdate>$FreeBSD: src/release/doc/zh_CN.GB2312/hardware/common/dev.sgml,v 1.7 2006/03/05 15:07:55 delphij Exp $</pubdate>
+ <pubdate>$FreeBSD: src/release/doc/zh_CN.GB2312/hardware/common/dev.sgml,v 1.8 2006/04/15 05:32:12 delphij Exp $</pubdate>
</sect1info>
<title>Ö§³ÖµÄÓ²¼þ</title>
@@ -116,6 +116,8 @@
&hwlist.isp;
+ &hwlist.mfi;
+
&hwlist.mlx;
<note>
@@ -197,6 +199,8 @@
&hwlist.axe;
+ &hwlist.bce;
+
<para arch="i386,amd64">»ùÓÚ Broadcom BCM4401 µÄ¸ßËÙÒÔÌ«ÍøÊÊÅäÆ÷
(&man.bfe.4; Çý¶¯³ÌÐò)</para>
@@ -473,6 +477,8 @@
&hwlist.uart;
+ &hwlist.scc;
+
<para arch="i386,alpha,amd64">ʹÓù²Ïí IRQ µÄ AST 4 ¿Ú´®¿Ú¿¨</para>
<para arch="i386">ARNET ´®¿Ú¿¨ (&man.ar.4; Çý¶¯³ÌÐò)
==== //depot/projects/soc2005/bsdinstaller/src/release/doc/zh_CN.GB2312/relnotes/common/new.sgml#6 (text+ko) ====
@@ -1,14 +1,14 @@
<!--
The FreeBSD Simplified Chinese Project
- Original revision: 1.910
+ Original revision: 1.914
-->
<articleinfo>
<title>&os;/&arch; &release.current; ·¢ÐÐ˵Ã÷</title>
>>> TRUNCATED FOR MAIL (1000 lines) <<<
More information about the p4-projects
mailing list