PERFORCE change 95274 for review
Marcel Moolenaar
marcel at FreeBSD.org
Fri Apr 14 21:30:34 UTC 2006
http://perforce.freebsd.org/chv.cgi?CH=95274
Change 95274 by marcel at marcel_nfs on 2006/04/14 21:30:22
Eliminate the PUC_FASTINTR option. Interrupts will be fast
by default. When there's a subordinate driver that's not
fast, the interrupt will become MPSAFE.
Affected files ...
.. //depot/projects/uart/alpha/conf/DEFAULTS#2 edit
.. //depot/projects/uart/amd64/conf/DEFAULTS#2 edit
.. //depot/projects/uart/conf/NOTES#33 edit
.. //depot/projects/uart/conf/options#27 edit
.. //depot/projects/uart/i386/conf/DEFAULTS#2 edit
.. //depot/projects/uart/ia64/conf/DEFAULTS#2 edit
.. //depot/projects/uart/pc98/conf/DEFAULTS#2 edit
Differences ...
==== //depot/projects/uart/alpha/conf/DEFAULTS#2 (text+ko) ====
@@ -7,5 +7,3 @@
# Pseudo devices.
device mem # Memory and kernel memory devices
-
-options PUC_FASTINTR
==== //depot/projects/uart/amd64/conf/DEFAULTS#2 (text+ko) ====
@@ -11,5 +11,3 @@
# Pseudo devices.
device mem # Memory and kernel memory devices
device io # I/O device
-
-options PUC_FASTINTR
==== //depot/projects/uart/conf/NOTES#33 (text+ko) ====
@@ -1684,15 +1684,8 @@
device scc
# PCI Universal Communications driver
-# Supports various single and multi port PCI serial cards. Maybe later
-# also the parallel ports on combination serial/parallel cards. New cards
-# can be added in src/sys/dev/puc/pucdata.c.
-#
-# If the PUC_FASTINTR option is used the driver will try to use fast
-# interrupts. The card must then be the only user of that interrupt.
-# Interrupts cannot be shared when using PUC_FASTINTR.
+# Supports various multi port PCI I/O cards.
device puc
-options PUC_FASTINTR
#
# Network interfaces:
==== //depot/projects/uart/conf/options#27 (text+ko) ====
@@ -123,7 +123,6 @@
PANIC_REBOOT_WAIT_TIME opt_panic.h
PPS_SYNC opt_ntp.h
PREEMPTION opt_sched.h
-PUC_FASTINTR opt_puc.h
QUOTA
SCHED_4BSD opt_sched.h
SCHED_ULE opt_sched.h
==== //depot/projects/uart/i386/conf/DEFAULTS#2 (text+ko) ====
@@ -14,5 +14,3 @@
# Pseudo devices.
device mem # Memory and kernel memory devices
device io # I/O device
-
-options PUC_FASTINTR
==== //depot/projects/uart/ia64/conf/DEFAULTS#2 (text+ko) ====
@@ -10,5 +10,3 @@
# Pseudo devices.
device mem # Memory and kernel memory devices
-
-options PUC_FASTINTR
==== //depot/projects/uart/pc98/conf/DEFAULTS#2 (text+ko) ====
@@ -15,5 +15,3 @@
# Pseudo devices.
device mem # Memory and kernel memory devices
device io # I/O device
-
-options PUC_FASTINTR
More information about the p4-projects
mailing list