PERFORCE change 95244 for review
Marcel Moolenaar
marcel at FreeBSD.org
Fri Apr 14 15:15:24 UTC 2006
http://perforce.freebsd.org/chv.cgi?CH=95244
Change 95244 by marcel at marcel_nfs on 2006/04/14 15:14:56
Remove Quatech comment about the SPAD jumper. It only applies
to sio(4), because sio(4) tests if there's a scratch pad
register in order to distinguish between NS8250 and INS16450.
uart(4) doesn't care and leaves the scratch pad alone.
While here, add an entry for the Quatech SSCLP-100. Note that
the manual states that BAR 1 is being used, which would mean
RID 0x14. Use 0x18 for now. I have a DSC-100 coming in soon
to verify.
Affected files ...
.. //depot/projects/uart/dev/uart/uart_bus_pci.c#15 edit
Differences ...
==== //depot/projects/uart/dev/uart/uart_bus_pci.c#15 (text+ko) ====
@@ -82,13 +82,8 @@
{ 0x131f, 0x2000, 0xffff, 0, "Siig - CyberSerial (1-port) 16550", 0x10 },
{ 0x131f, 0x2001, 0xffff, 0, "Siig - CyberSerial (1-port) 16650", 0x10 },
{ 0x131f, 0x2002, 0xffff, 0, "Siig - CyberSerial (1-port) 16850", 0x10 },
-{ 0x135c, 0x01c0, 0xffff, 0, "Quatech - SSCLP-200/300", 0x18
- /*
- * NB: You must mount the "SPAD" jumper to correctly detect
- * the FIFO on the UART. Set the options on the jumpers,
- * we do not support the extra registers on the Quatech.
- */
-},
+{ 0x135c, 0x0180, 0xffff, 0, "Quatech - SSCLP-100", 0x18 },
+{ 0x135c, 0x01c0, 0xffff, 0, "Quatech - SSCLP-200/300", 0x18 },
{ 0x135e, 0x7101, 0xffff, 0, "Sealevel Systems - Single Port RS-232/422/485/530", 0x18 },
{ 0x1407, 0x0110, 0xffff, 0, "Lava Computer mfg - DSerial-PCI Port A", 0x10 },
{ 0x1407, 0x0111, 0xffff, 0, "Lava Computer mfg - DSerial-PCI Port B", 0x10 },
More information about the p4-projects
mailing list