PERFORCE change 52133 for review

[Chris Vance]

http://perforce.freebsd.org/chv.cgi?CH=52133

Change 52133 by cvance at cvance_g5 on 2004/05/03 05:55:27

	Begin to update the installation instructions.  I'll probably be 
	reworking the build system, so there will be more changes coming.

Affected files ...

.. //depot/projects/trustedbsd/sedarwin73/bootstrap_instructions.txt#2 edit

Differences ...

==== //depot/projects/trustedbsd/sedarwin73/bootstrap_instructions.txt#2 (text+ko) ====

@@ -1,12 +1,12 @@
-XXX: These are still draft install instructions, and known to be
+These are still draft install instructions, and known to be
 potentially flakey.  Caution advised, especially near the end.
 
-Step 1: Mac OS X Jaguar 10.2.8
+Step 1: Mac OS X Jaguar 10.3.3
 
-  Install Jaguar from your installation medium.  In our environment,
-  we typically install 10.2.7, then use Software Update to slide
-  forward to 10.2.8.  Currently, Panther and older Jaguar releases
-  are not supported.
+  Install Panther from your installation medium.  In our environment,
+  we typically install 10.3.0, then use Software Update to slide
+  forward to 10.3.3.  Currently, older releases are not supported.
+  The 10.3.3 combined updated is included on the SEDarwin source CD.
 
   The instructions assume that / is the root of the system that
   will have SEdarwin installed. Boot into that partition before
@@ -21,7 +21,7 @@
   In our environment, this requires installing and configuring the
   Perforce client, then checking out:
 
-    //projects/trustedbsd/sedarwin/...
+    //projects/trustedbsd/sedarwin73/...
 
   The remaining steps will assume that the current working directory
   at the start of each step is your local checkout of the sedarwin
@@ -33,57 +33,17 @@
   build tools available from the Apple Open Source web page.  These
   tools are:
 
-    bootstrap_cmds-35
+    bootstrap_cmds-44
     Libstreams-23
-    cctools-435.4
+    cctools-495.2
 
-  These may also be checked out and installed from the TrustedBSD
-  Perforce repository using the following paths:
+  These packages are included on the SEDarwin source CD, as well as a
+  tarfile containing binaries.
 
-    //depot/vendor/apple/darwin/apsl/...
+  Extract the tarfile into /usr/local on the build system.
 
-  Build, install bootstrap_cmds using:
-
-    cd bootstrap_cmds
-    make ; sudo make install
-    cd ..
-
-  Copy a header that was left out of the Jaguar header installation:
-
-    sudo cp /usr/include/sys/unistd.h \
-      /System/Library/Frameworks/Kernel.framework/Headers/sys/
-
-  Build, install Libstreams:
-
-    cd Libstreams
-    make ; sudo make install
-    cd ..
-
-  In the next step, selected parts of cctools must be built and installed
-  to allow a Darwin kernel to be built on Mac OS X.  First, you must
-  manually edit cctools/Makefile to replace the COMMON_SUBDIRS
-  definition with:
-
-    COMMON_SUBDIRS=libstuff libmacho misc
-
-  Next, build these components:
-
-    cd cctools
-    make RC_OS=macos
-
-  Next, install seg_hack:
-
-    sudo cp misc/seg_hack.NEW /usr/local/bin/seg_hack
-
-  Next, build and install libkld:
-
-    cd ld
-    make RC_OS=macos kld_build
-    sudo cp static_kld/libkld.a /usr/local/lib
-    sudo ranlib /usr/local/lib/libkld.a
-    cd ../..
-
-  You now have the missing bits of the Darwin kernel build installed.
+    cd /usr/local
+    sudo tar xvzf buildtools_usrlocal.tgz
 
 Step 3: Configure TrustedBSD/SEBSD makefiles