HVM boot fail, BETA-1 and current
Sean Bruno
seanbru at yahoo-inc.com
Sat Jul 30 00:36:45 UTC 2011
Tried to boot up an BETA-1 XENHVM kernel today, apparently CAMATA
doesn't work in this environment. Let me know if you want access to this
VM as its in the cluster and I can trivially get you on the machine.
/boot.config: -Dh
Consoles: internal video/keyboard serial port
BIOS drive C: is disk0
BIOS 639kB/2096128kB available memory
FreeBSD/x86 bootstrap loader, Revision 1.1
(root at farrell.cse.buffalo.edu, Thu Jul 28 16:09:55 UTC 2011)
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0xbb97c0 data=0x1431d0+0x2bc450 syms=[0x8
+0x110da8+0x8+0xf8650]
-
______ ____ _____ _____
| ____| | _ \ / ____| __ \
| |___ _ __ ___ ___ | |_) | (___ | | | |
| ___| '__/ _ \/ _ \| _ < \___ \| | | |
| | | | | __/ __/| |_) |____) | |__| |
| | | | | | || | | |
|_| |_| \___|\___||____/|_____/|_____/ ```
`
s` `.....---.......--.```
-/
�������������Welcome to FreeBSD���������� � +o .--` /y:`
+.
� � yo`:. :o `
+-
� 1. Boot [ENTER] � y/ -/`
-o/
� 2. [Esc]ape to loader prompt � .- ::/sy
+:.
� 3. Reboot � /
`-- /
� �
`: :`
� Options: �
`: :`
� 4. [A]CPI Support: Enabled
� / /
� 5. Boot Safe [M]ode: NO � .-
-.
� 6. Boot [S]ingle User: NO � --
-.
� 7. Boot [V]erbose: NO � `:` `:`
� � .-- `--.
� � .---.....----.
���������������������������������������� �
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000e0000 len=0000000000020000
SMAP type=01 base=0000000000100000 len=000000007ff00000
SMAP type=02 base=00000000fc000000 len=0000000004000000
Table 'FACP' at 0xfc005ee0
Table 'APIC' at 0xfc005fe0
APIC: Found table at 0xfc005fe0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 1: enabled
SMP: Added CPU 2 (AP)
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-BETA1 #0 r224482M: Fri Jul 29 16:42:18 PDT 2011
root at ref9-xen64.freebsd.org:/usr/obj/dumpster/scratch/sbruno-scratch/head/sys/XENHVM amd64
WARNING: WITNESS option enabled, expect reduced performance.
Table 'FACP' at 0xfc005ee0
Table 'APIC' at 0xfc005fe0
ACPI: No SRAT table found
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff815c4000.
Hypervisor: Origin = "XenVMMXenVMM"
Calibrating TSC clock ... TSC clock: 2493823785 Hz
CPU: Intel(R) Xeon(R) CPU L5420 @ 2.50GHz (2493.82-MHz
K8-class CPU)
Origin = "GenuineIntel" Id = 0x10676 Family = 6 Model = 17
Stepping = 6
Features=0x1781fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x80082201<SSE3,SSSE3,CX16,SSE4.1,HV>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
real memory = 2147483648 (2048 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x00000000015f3000 - 0x000000007c38ffff, 2061094912 bytes (503197 pages)
avail memory = 2045038592 (1950 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <Xen HVM>
INTR: Adding local APIC 2 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000
x86bios: SSEG 0x001000-0x001fff at 0xffffff800020d000
x86bios: EBDA 0x09f000-0x09ffff at 0xfffffe000009f000
x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xea020 00024 (v02 Xen)
ACPI: XSDT 0xfc006050 00034 (v01 Xen HVM 00000000 HVML 00000000)
ACPI: FACP 0xfc005ee0 000F4 (v04 Xen HVM 00000000 HVML 00000000)
ACPI: DSDT 0xfc002c40 0321F (v02 Xen HVM 00000000 INTL 20090220)
ACPI: FACS 0xfc002c00 00040
ACPI: APIC 0xfc005fe0 00070 (v02 Xen HVM 00000000 HVML 00000000)
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 1
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 5, irq 5
ioapic0: intpin 5 trigger: level
ioapic0: intpin 5 polarity: low
MADT: Interrupt override: source 10, irq 10
ioapic0: intpin 10 trigger: level
ioapic0: intpin 10 polarity: low
MADT: Interrupt override: source 11, irq 11
ioapic0: intpin 11 trigger: level
ioapic0: intpin 11 polarity: low
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-47 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5
feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
Event-channel device installed.
wlan: <802.11 Link Layer>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <Xen> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
ACPI timer: 1/1 1/0 1/1 1/1 1/0 1/1 1/1 1/0 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x1f48-0x1f4b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 5 10 11
Validation 0 5 N 0 5 10 11
After Disable 0 255 N 0 5 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 5 10 11
Validation 0 10 N 0 5 10 11
After Disable 0 255 N 0 5 10 11
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 5 10 11
Validation 0 11 N 0 5 10 11
After Disable 0 255 N 0 5 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 5 10 11
Validation 0 5 N 0 5 10 11
After Disable 0 255 N 0 5 10 11
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: decoding 4 range 0-0xcf7
pcib0: decoding 4 range 0xd00-0xffff
pcib0: decoding 3 range 0xa0000-0xbffff
pcib0: decoding 3 range 0xf0000000-0xfbffffff
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x8086, dev=0x1237, revid=0x02
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0004, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7000, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7010, revid=0x00
domain=0, bus=0, slot=1, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:1:1
pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:1:1
pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:1:1
pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:1:1
map[20]: type I/O Port, range 32, base 0xc120, size 4, enabled
pcib0: allocated type 4 (0xc120-0xc12f) for rid 20 of pci0:0:1:1
found-> vendor=0x8086, dev=0x7020, revid=0x01
domain=0, bus=0, slot=1, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
map[20]: type I/O Port, range 32, base 0xc100, size 5, enabled
pcib0: allocated type 4 (0xc100-0xc11f) for rid 20 of pci0:0:1:2
pcib0: matched entry for 0.1.INTD
pcib0: slot 1 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x7113, revid=0x01
domain=0, bus=0, slot=1, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0004, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 20
found-> vendor=0x1013, dev=0x00b8, revid=0x00
domain=0, bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type Prefetchable Memory, range 32, base 0xf0000000,
size 25, enabled
pcib0: allocated type 3 (0xf0000000-0xf1ffffff) for rid 10 of pci0:0:2:0
map[14]: type Memory, range 32, base 0xf3000000, size 12,
enabled
pcib0: allocated type 3 (0xf3000000-0xf3000fff) for rid 14 of pci0:0:2:0
found-> vendor=0x5853, dev=0x0001, revid=0x01
domain=0, bus=0, slot=3, func=0
class=ff-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[10]: type I/O Port, range 32, base 0xc000, size 8, enabled
pcib0: allocated type 4 (0xc000-0xc0ff) for rid 10 of pci0:0:3:0
map[14]: type Prefetchable Memory, range 32, base 0xf2000000,
size 24, enabled
pcib0: allocated type 3 (0xf2000000-0xf2ffffff) for rid 14 of pci0:0:3:0
pcib0: matched entry for 0.3.INTA
pcib0: slot 3 INTA hardwired to IRQ 28
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc120-0xc12f at device 1.1 on pci0
ata0: <ATA channel 0> on atapci0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 49
ata1: <ATA channel 1> on atapci0
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 50
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc100-0xc11f irq 23
at device 1.2 on pci0
ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 51
usbus0: controller did not stop
usbus0: <Intel 82371SB (PIIX3) USB controller> on uhci0
usbus0: bpf attached
uhci0: usbpf: Attached
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> mem
0xf0000000-0xf1ffffff,0xf3000000-0xf3000fff at device 2.0 on pci0
xenpci0: <Xen Platform Device> port 0xc000-0xc0ff mem
0xf2000000-0xf2ffffff irq 28 at device 3.0 on pci0
xenpci0: Xen version 3.4.
ioapic0: routing intpin 28 (PCI IRQ 28) to lapic 0 vector 52
xenstore0: <XenStore> on xenpci0
Grant table initialized
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 53
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us,
adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 54
Event timer "RTC" frequency 32768 Hz quality 0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0061
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 55
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0061
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 56
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 57
uart0: fast interrupt
uart0: console (9600,n,8,1)
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 58
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi0: wakeup code va 0xffffff800032f000 pa 0x4000
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 1: ioport 0x1c00 alloc failed
ahc_isa_probe 2: ioport 0x2c00 alloc failed
ahc_isa_probe 3: ioport 0x3c00 alloc failed
ahc_isa_probe 4: ioport 0x4c00 alloc failed
ahc_isa_probe 5: ioport 0x5c00 alloc failed
ahc_isa_probe 6: ioport 0x6c00 alloc failed
ahc_isa_probe 7: ioport 0x7c00 alloc failed
ahc_isa_probe 8: ioport 0x8c00 alloc failed
ahc_isa_probe 9: ioport 0x9c00 alloc failed
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
pcib0: allocated type 4 (0x2f8-0x2ff) for rid 0 of uart1
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 52732026 Hz
Timecounters tick every 10.000 msec
vlan: initialized, using hash tables with chaining
usbus0: 12Mbps Full Speed USB v1.0
lo0: bpf attached
hptrr: no controller detected.
xenbusb_front0: <Xen Frontend Devices> on xenstore0
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ata0: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x0
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0xff msb=0xff
ata1: reset tp2 stat0=00 stat1=00 devices=0x10000
(aprobe0:ata1:0:0:0): SIGNATURE: eb14
cd0 at ata1 bus 0 scbus1 target 0 lun 0
cd0: <QEMU QEMU DVD-ROM 0.10> Removable CD-ROM SCSI-0 device
cd0: Serial Number QM00003
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: cd present [310822 x 2048 byte records]
xn0: <Virtual Network Interface> at device/vif/0 on xenbusb_front0
xn0: bpf attached
xn0: Ethernet address: 00:16:3e:00:00:04
GEOM: new disk cd0
xenbusb_back0: <Xen Backend Devices> on xenstore0
xctrl0: <Xen Control Device> on xenstore0
pass0 at ata1 bus 0 scbus1 target 0 lun 0
pass0: <QEMU QEMU DVD-ROM 0.10> Removable CD-ROM SCSI-0 device
pass0: Serial Number QM00003
pass0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
xbd0: 607MB <Virtual Block Device> at device/vbd/5632 on xenbusb_front0
xbd0: attaching as ad2
xbd1: 10240MB <Virtual Block Device> at device/vbd/768 on xenbusb_front0
xbd1: attaching as ad0
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x02000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
TSC timecounter discards lower 8 bit(s)
Timecounter "TSC-low" frequency 9741499 Hz quality -100
WARNING: WITNESS option enabled, expect reduced performance.
uhub0: 2 ports with 2 removable, self powered
GEOM: new disk ad2
GEOM: new disk ad0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.2: <QEMU 0.10.2> at usbus0
ums0: <Endpoint1 Interrupt Pipe> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
Trying to mount root from ufs:/dev/ada0p2 [rw]...
mountroot: waiting for device /dev/ada0p2 ...
Mounting from ufs:/dev/ada0p2 failed with error 19.
Loader variables:
vfs.root.mountfrom=ufs:/dev/ada0p2
vfs.root.mountfrom.options=rw
Manual root filesystem specification:
<fstype>:<device> [options]
Mount <device> using filesystem <fstype>
and with the specified (optional) option list.
eg. ufs:/dev/da0s1a
zfs:tank
cd9660:/dev/acd0 ro
(which is equivalent to: mount -t cd9660 -o ro /dev/acd0 /)
? List valid disk boot devices
. Yield 1 second (for background tasks)
<empty line> Abort manual input
mountroot>
More information about the freebsd-xen
mailing list