FreeBSD 8.1-RELEASE-p1 DomU vcpus >= 2 issue

[Yuriy Kohut]

Do you know is there any chance that will be fixed nearest future ?
---
Yura

On Oct 25, 2010, at 1:36 PM, Adrian Chadd wrote:

> Xen DomU with vcpu > 1 has not worked in quite a bit of time.
> 
> It's in sore need of attention.
> 
> 
> Adrian
> 
> On 25 October 2010 18:34, Yuriy Kohut <ykohut at onapp.com> wrote:
>> Hello,
>> 
>> 
>> I faced with the following issue while configuring my  FreeBSD 8.1-RELEASE-p1 DomU with  vcpus >= 2. Here kernel and init messages while DomU is booting:
>> ----
>> SMP: Added CPU 0 (BSP)
>> SMP: Added CPU 1 (AP)
>> gdtpfn=85f45 pdptpfn=13537
>> INTR: Adding local APIC 1 as a target
>> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>>  cpu0 (BSP): APIC ID:  0
>>  cpu1 (AP): APIC ID:  1
>> ULE: setup cpu 0
>> ULE: setup cpu 1
>> [XEN] IPI cpu=0 irq=128 vector=RESCHEDULE_VECTOR (0)
>> [XEN] IPI cpu=0 irq=129 vector=CALL_FUNCTION_VECTOR (1)
>> [XEN] IPI cpu=1 irq=130 vector=RESCHEDULE_VECTOR (0)
>> [XEN] IPI cpu=1 irq=131 vector=CALL_FUNCTION_VECTOR (1)
>> 
>> ...
>> 
>> start_init: trying /sbin/init
>> pid 22 (sysctl), uid 0: exited on signal 11
>> Segmentation fault
>> pid 24 (ps), uid 0: exited on signal 11
>> Segmentation fault
>> pid 26 (rcorder), uid 0: exited on signal 11
>> Segmentation fault
>> pid 27 (grep), uid 0: exited on signal 11
>> Segmentation fault
>> pid 28 (rcorder), uid 0: exited on signal 11
>> Segmentation fault
>> 
>> pid 29 (date), uid 0: exited on signal 11
>> Segmentation fault
>> 
>> FreeBSD/i386 (Amnesiac) (xc0)
>> 
>> login: root
>> pid 30 (login), uid 0: exited on signal 11
>> pid 31 (getty), uid 0: exited on signal 11
>> pid 32 (getty), uid 0: exited on signal 11
>> pid 33 (getty), uid 0: exited on signal 11
>> pid 34 (getty), uid 0: exited on signal 11
>> ----
>> 
>> 
>> Everything is ok while vcpus = "1" is set into DomU config file.
>> 
>> 
>> DomU details
>> FreeBSD 8.1-RELEASE-p1 #11
>> kernel config: /usr/src/sys/XEN i386
>> xen config:
>> ----
>> kernel = "/var/lib/xen/images/kernel.tWcH4oyDer8p"
>> memory = "1024"
>> name = "tWcH4oyDer8p"
>> vcpus = "2"
>> vid = "10"
>> 
>> vif = [ 'mac=00:16:3e:68:dd:33, bridge=xenbr0, ip=0.0.0.0, vifname=tWcH4oyDer8p, rate=0Mb/s' ]
>> disk = [ 'phy:/dev/iscsi_0_10,sda,w', 'phy:/dev/iscsi_0_130,sdb,w' ]
>> 
>> extra = "boot_verbose=1"
>> extra += ",vfs.root.mountfrom=ufs:/dev/da0"
>> extra += ",kern.hz=100"
>> ----
>> 
>> 
>> Dom0 details
>> CentOS release 5.4 (Final)
>> Linux vl-radar-box1.slc.westdc.net 2.6.18-164.6.1.el5xen #1 SMP Tue Nov 3 16:48:13 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
>> xen-3.0.3-94.el5_4.2
>> 
>> 
>> Please assist
>> Thank you
>> ---
>> Yura
>> 
>> _______________________________________________
>> freebsd-xen at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-xen
>> To unsubscribe, send any mail to "freebsd-xen-unsubscribe at freebsd.org"
>>