dmesg

Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.3-RELEASE-p11 #0: Mon Oct 24 18:49:24 UTC 2016
    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
VT(vga): text 80x25
CPU: Quad-Core AMD Opteron(tm) Processor 8350 HE (2000.13-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x100f23  Family=0x10  Model=0x2  Stepping=3
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x802009<SSE3,MON,CX16,POPCNT>
  AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS>
  SVM: NP,NAsids=64
  TSC: P-state invariant
real memory  = 18253611008 (17408 MB)
avail memory = 16585170944 (15816 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <071409 APIC0955>
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 4 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID: 16
 cpu1 (AP): APIC ID: 17
 cpu2 (AP): APIC ID: 18
 cpu3 (AP): APIC ID: 19
 cpu4 (AP): APIC ID: 20
 cpu5 (AP): APIC ID: 21
 cpu6 (AP): APIC ID: 22
 cpu7 (AP): APIC ID: 23
 cpu8 (AP): APIC ID: 24
 cpu9 (AP): APIC ID: 25
 cpu10 (AP): APIC ID: 26
 cpu11 (AP): APIC ID: 27
 cpu12 (AP): APIC ID: 28
 cpu13 (AP): APIC ID: 29
 cpu14 (AP): APIC ID: 30
 cpu15 (AP): APIC ID: 31
random: <Software, Yarrow> initialized
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-47 on motherboard
module_register_init: MOD_LOAD (vesa, 0xffffffff80dc6510, 0) error 19
kbd1 at kbdmux0
acpi0: <071409 XSDT0955> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
cpu8: <ACPI CPU> on acpi0
cpu9: <ACPI CPU> on acpi0
cpu10: <ACPI CPU> on acpi0
cpu11: <ACPI CPU> on acpi0
cpu12: <ACPI CPU> on acpi0
cpu13: <ACPI CPU> on acpi0
cpu14: <ACPI CPU> on acpi0
cpu15: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed00fff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 950
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0x2f00-0x2f7f at device 1.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <nVidia nForce MCP55 USB Controller> mem 0xdfabf000-0xdfabffff irq 22 at device 2.0 on pci0
usbus0 on ohci0
ehci0: <NVIDIA nForce MCP55 USB 2.0 controller> mem 0xdfabec00-0xdfabecff irq 23 at device 2.1 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
atapci0: <nVidia nForce MCP55 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 4.0 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
atapci1: <nVidia nForce MCP55 SATA300 controller> port 0xabe0-0xabe7,0xa8e0-0xa8e3,0xa880-0xa887,0xa820-0xa823,0xa700-0xa70f mem 0xdfabd000-0xdfabdfff irq 21 at device 5.0 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
atapci2: <nVidia nForce MCP55 SATA300 controller> port 0xa580-0xa587,0xa4c0-0xa4c3,0xa460-0xa467,0xa400-0xa403,0xa280-0xa28f mem 0xdfabc000-0xdfabcfff irq 22 at device 5.1 on pci0
ata4: <ATA channel> at channel 0 on atapci2
ata5: <ATA channel> at channel 1 on atapci2
atapci3: <nVidia nForce MCP55 SATA300 controller> port 0xa100-0xa107,0xa0a0-0xa0a3,0xa040-0xa047,0x9fe0-0x9fe3,0x9ce0-0x9cef mem 0xdfabb000-0xdfabbfff irq 23 at device 5.2 on pci0
ata6: <ATA channel> at channel 0 on atapci3
ata7: <ATA channel> at channel 1 on atapci3
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xbc00-0xbc7f mem 0xd8000000-0xdbffffff,0xdfbc0000-0xdfbfffff at device 4.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mpt0: <LSILogic SAS/SATA Adapter> port 0xc000-0xc0ff mem 0xdfefc000-0xdfefffff,0xdfee0000-0xdfeeffff irq 16 at device 0.0 on pci2
mpt0: MPI Version=1.5.16.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (14 Max)
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xde80-0xde9f mem 0xdffe0000-0xdfffffff,0xdffc0000-0xdffdffff irq 17 at device 0.0 on pci5
em0: Using an MSI interrupt
em0: Ethernet address: 00:e0:81:b4:fa:6e
em1: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xdd00-0xdd1f mem 0xdff80000-0xdff9ffff,0xdff60000-0xdff7ffff irq 18 at device 0.1 on pci5
em1: Using an MSI interrupt
em1: Ethernet address: 00:e0:81:b4:fa:6f
pcib6: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI Host-PCI bridge> on acpi0
pci64: <ACPI PCI bus> on pcib8
pci64: <memory, RAM> at device 0.0 (no driver attached)
pci64: <memory, RAM> at device 1.0 (no driver attached)
pcib9: <ACPI PCI-PCI bridge> at device 10.0 on pci64
pci65: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 11.0 on pci64
pci66: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 12.0 on pci64
pci67: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 13.0 on pci64
pci68: <ACPI PCI bus> on pcib12
pcib13: <PCI-PCI bridge> irq 40 at device 0.0 on pci68
pci69: <PCI bus> on pcib13
pcib14: <ACPI PCI-PCI bridge> at device 14.0 on pci64
pci70: <ACPI PCI bus> on pcib14
pcib15: <ACPI PCI-PCI bridge> at device 15.0 on pci64
pcib15: failed to allocate initial I/O port window: 0xf000-0xffff
pci71: <ACPI PCI bus> on pcib15
vgapci1: <VGA-compatible display> mem 0xc0000000-0xcfffffff,0xd7fc0000-0xd7ffffff irq 41 at device 0.0 on pci71
vgapci1: Boot video device
hdac0: <ATI (0xaab0) HDA Controller> mem 0xd7f9c000-0xd7f9ffff irq 42 at device 0.1 on pci71
hdac0: hdac_get_capabilities: Invalid corb size (0)
device_attach: hdac0 attach returned 6
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
random: unblocking device.
usbus0: 12Mbps Full Speed USB v1.0
Timecounters tick every 1.000 msec
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 10 ports with 10 removable, self powered
uhub1: 10 ports with 10 removable, self powered
cd0 at ata7 bus 0 scbus7 target 0 lun 0
cd0: <TSSTcorp CDDVDW SH-S223F SB03> Removable CD-ROM SCSI device
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: 4414MB (2260272 2048 byte sectors)
da0 at mpt0 bus 0 scbus8 target 0 lun 0
da0: <WD WD4001FYYG-01SL3 VR02> Fixed Direct Access SPC-4 SCSI device
da0: Serial Number         WMC1F0799080
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 3815447MB (7814037168 512 byte sectors)
SMP: AP CPU #4 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #8 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #9 Launched!
SMP: AP CPU #10 Launched!
SMP: AP CPU #11 Launched!
SMP: AP CPU #13 Launched!
SMP: AP CPU #14 Launched!
SMP: AP CPU #15 Launched!
SMP: AP CPU #12 Launched!
Timecounter "TSC" frequency 2000129170 Hz quality 800
ugen0.2: <ROCCAT> at usbus0
ukbd0: <ROCCAT ROCCAT Kone XTD, class 0/0, rev 2.00/1.01, addr 2> on usbus0
kbd2 at ukbd0
ugen1.2: <Generic> at usbus1
umass0: <Bulk> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0xc000
umass0:10:0:-1: Attached to scbus10
da1 at umass-sim0 bus 0 scbus10 target 0 lun 0
da1: <Generic IC1210        CF 1.9C> Removable Direct Access SCSI device
da1: Serial Number 0000001
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da1: quirks=0x2<NO_6_BYTE>
da2 at umass-sim0 bus 0 scbus10 target 0 lun 1
da2: <Generic IC1210        MS 1.9C> Removable Direct Access SCSI device
da2: Serial Number 0000001
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da2: quirks=0x2<NO_6_BYTE>
da3 at umass-sim0 bus 0 scbus10 target 0 lun 2
da3: <Generic IC1210    MMC/SD 1.9C> Removable Direct Access SCSI device
da3: Serial Number 0000001
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da3: quirks=0x2<NO_6_BYTE>
da4 at umass-sim0 bus 0 scbus10 target 0 lun 3
da4: <Generic IC1210        SM 1.9C> Removable Direct Access SCSI device
da4: Serial Number 0000001
da4: 40.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
da4: quirks=0x2<NO_6_BYTE>
Root mount waiting for: usbus1
usb_alloc_device: set address 3 failed (USB_ERR_IOERROR, ignored)
Root mount waiting for: usbus1
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
Root mount waiting for: usbus1
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored)
Root mount waiting for: usbus1
Root mount waiting for: usbus1
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
Root mount waiting for: usbus1
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored)
Root mount waiting for: usbus1
Root mount waiting for: usbus1
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored)
Root mount waiting for: usbus1
Root mount waiting for: usbus1
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
Root mount waiting for: usbus1
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored)
Root mount waiting for: usbus1
Root mount waiting for: usbus1
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_IOERROR
ugen1.3: <Unknown> at usbus1 (disconnected)
uhub_reattach_port: could not allocate new device
Trying to mount root from ufs:/dev/da0p3 [rw]...
em0: link state changed to UP
ums0: <ROCCAT ROCCAT Kone XTD, class 0/0, rev 2.00/1.01, addr 2> on usbus0
ums0: 5 buttons and [XYZT] coordinates ID=1
TCP: [195.42.100.1]:52393 to [195.42.100.10]:80 tcpflags 0x2<SYN>; tcp_input: Connection attempt to closed port
TCP: [195.42.100.1]:46855 to [195.42.100.10]:80 tcpflags 0x2<SYN>; tcp_input: Connection attempt to closed port
info: [drm] Initialized drm 1.1.0 20060810
drmn1: <Radeon HD 8800M Series> on vgapci1
info: [drm] RADEON_IS_PCIE
info: [drm] initializing kernel modesetting (VERDE 0x1002:0x682B 0x174B:0xA00C).
info: [drm] register mmio base: 0xD7FC0000
info: [drm] register mmio size: 262144
vgapci1: 0x100 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff).
error: [drm:pid1000:radeon_device_init] *ERROR* Unable to find PCI I/O BAR
info: [drm] radeon_atrm_get_bios: ===> Try ATRM...
info: [drm] radeon_atrm_get_bios: pci_find_class() found: 0:1:4:0, vendor=18ca, device=0020
info: [drm] radeon_atrm_get_bios: Get ACPI device handle
info: [drm] radeon_acpi_vfct_bios: ===> Try VFCT...
info: [drm] radeon_acpi_vfct_bios: Get "VFCT" ACPI table
info: [drm] radeon_acpi_vfct_bios: Failed to get "VFCT" table: AE_NOT_FOUND
info: [drm] igp_read_bios_from_vram: ===> Try IGP's VRAM...
info: [drm] igp_read_bios_from_vram: VRAM base address: 0xc0000000
info: [drm] igp_read_bios_from_vram: Map address: 0xfffff800c0000000 (262144 bytes)
info: [drm] igp_read_bios_from_vram: Incorrect BIOS signature: 0x2070
info: [drm] radeon_read_bios: ===> Try PCI Expansion ROM...
info: [drm] radeon_read_bios: Map address: 0xfffff800000c0000 (131072 bytes)
error: [drm:pid1000:radeon_atombios_init] *ERROR* Unable to find PCI I/O BAR; using MMIO for ATOM IIO
info: [drm] ATOM BIOS: C44501
drmn1: info: VRAM: 0M 0x0000000000000000 - 0xFFFFFFFFFFFFFFFF (0M used)
drmn1: info: GTT: 512M 0x0000000000000000 - 0x000000001FFFFFFF
info: [drm] Detected VRAM RAM=0M, BAR=256M
info: [drm] RAM width 128bits DDR
[TTM] Zone  kernel: Available graphics memory: 8376064 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
drmn1: error: Fatal error during GPU init
info: [drm] radeon: finishing device.
[TTM] Trying to take down uninitialized memory manager type 1
[TTM] Finalizing pool allocator
[TTM] Zone  kernel: Used memory at exit: 0 kiB
[TTM] Zone   dma32: Used memory at exit: 0 kiB
info: [drm] radeon: ttm finalized
device_attach: drmn1 attach returned 12
