ports/178670: x11/xorg: X does not refresh upper 1/4 screen in some windows
Anton Shterenlikht
mexas at bris.ac.uk
Thu Jul 11 07:40:01 UTC 2013
The following reply was made to PR ports/178670; it has been noted by GNATS.
From: Anton Shterenlikht <mexas at bris.ac.uk>
To: bug-followup at FreeBSD.org, mexas at bristol.ac.uk, zeising at freebsd.org
Cc:
Subject: Re: ports/178670: x11/xorg: X does not refresh upper 1/4 screen in some windows
Date: Thu, 11 Jul 2013 08:37:26 +0100 (BST)
This PR is likely linked with kern/178671:
http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/178671
vgapci0 at pci0:1:5:0: class=0x030000 card=0x30c2103c chip=0x791f1002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'RS690M [Radeon X1200 Series]'
class = display
subclass = VGA
driver:
xf86-video-ati-6.14.6 x11-drivers/xf86-video-ati
I attach the full pciconf -lv and dmesg below.
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-CURRENT #38 r251758: Tue Jun 18 21:14:59 BST 2013
root at buzi:/usr/obj/usr/src/sys/BUZI amd64
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
WARNING: WITNESS option enabled, expect reduced performance.
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (1994.97-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x60f82 Family = 0xf Model = 0x68 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
real memory = 3221225472 (3072 MB)
avail memory = 2861699072 (2729 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <HP 0944 >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ACPI BIOS Error (bug): 32/64X address mismatch in FADT/Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20130517/tbfadt-489)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HPQOEM SLIC-MPC> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi0: reservation of 0, 8000000 (3) failed
acpi0: reservation of 100000, fff00000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: Length mismatch for 3 range: 11ff000 vs 11fefff
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: failed to allocate initial prefetch window: 0xc0000000-0xc7ffffff
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xc0100000-0xc80fffff,0xd0200000-0xd020ffff,0xd0300000-0xd03fffff irq 19 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci16: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5906 A2, ASIC rev. 0x00c002> mem 0xd0000000-0xd000ffff irq 16 at device 0.0 on pci16
bge0: CHIP ID 0x0000c002; ASIC REV 0x0c; CHIP REV 0xc0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5906 10/100baseTX media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
bge0: Ethernet address: 00:1a:4b:89:4b:4e
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci32: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib4: failed to allocate initial memory window: 0xc8000000-0xc80fffff
pci48: <ACPI PCI bus> on pcib4
siba_bwn0: <Broadcom BCM4312 802.11a/b/g Wireless> mem 0xc8100000-0xc8103fff irq 18 at device 0.0 on pci48
siba_bwn0: unsupported coreid (USB 1.1 Host)
bwn0 on siba_bwn0
bwn0: WLAN (chipid 0x4311 rev 13) PHY (analog 4 type 2 rev 9) RADIO (manuf 0x17f ver 0x2050 rev 2)
bwn0: DMA (64 bits)
bwn0: Using 1 MSI messages
ahci0: <ATI IXP600 AHCI SATA controller> port 0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x5018-0x501b,0x5020-0x502f mem 0xd0409000-0xd04093ff irq 16 at device 18.0 on pci0
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier not supported
ahci0: quirks=0x1000<NOMSI>
ahcich0: <AHCI channel> at channel 0 on ahci0
ohci0: <OHCI (generic) USB controller> mem 0xd0401000-0xd0401fff irq 23 at device 19.0 on pci0
usbus0 on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xd0402000-0xd0402fff irq 17 at device 19.1 on pci0
usbus1 on ohci1
ohci2: <OHCI (generic) USB controller> mem 0xd0403000-0xd0403fff irq 17 at device 19.2 on pci0
usbus2 on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xd0404000-0xd0404fff irq 17 at device 19.3 on pci0
usbus3 on ohci3
ohci4: <OHCI (generic) USB controller> mem 0xd0405000-0xd0405fff irq 17 at device 19.4 on pci0
usbus4 on ohci4
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0406000-0xd04060ff irq 23 at device 19.5 on pci0
ehci0: AMD SB600/700 quirk applied
usbus5: EHCI version 1.0
usbus5 on ehci0
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x5040-0x504f irq 16 at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
hdac0: <ATI SB600 HDA Controller> mem 0xc0000000-0xc0003fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci2: <ACPI PCI bus> on pcib5
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xd0100000-0xd0100fff irq 20 at device 4.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
powernow0: <PowerNow! K8> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
powernow1: <PowerNow! K8> on cpu1
Timecounters tick every 1.000 msec
hdacc0: <Analog Devices AD1981HD HDA CODEC> at cad 0 on hdac0
hdaa0: <Analog Devices AD1981HD Audio Function Group> at nid 1 on hdacc0
pcm0: <Analog Devices AD1981HD (Analog 2.0+HP/2.0)> at nid 5,6 and 8,9 on hdaa0
hdacc1: <Lucent/Agere Systems (0x1040) HDA CODEC> at cad 1 on hdac0
unknown: <Lucent/Agere Systems (0x1040) HDA CODEC Modem Function Group> at nid 1 on hdacc1 (no driver attached)
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen1.1: <ATI> at usbus1
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen0.1: <ATI> at usbus0
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen5.1: <ATI> at usbus5
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen4.1: <ATI> at usbus4
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen3.1: <ATI> at usbus3
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen2.1: <ATI> at usbus2
uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: cd0 at ata0 bus 0 scbus1 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ-861H 1.50> Removable CD-ROM SCSI-0 device
cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
<ST9160821AS 3.BHE> ATA-7 SATA 1.x device
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
uhub5: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
Root mount waiting for: usbus5
Root mount waiting for: usbus5
Root mount waiting for: usbus5
Root mount waiting for: usbus5
Root mount waiting for: usbus5
uhub2: 10 ports with 10 removable, self powered
Trying to mount root from ufs:/dev/ada0s1a [rw]...
ugen0.2: <Broadcom Corp> at usbus0
wlan0: Ethernet address: 00:1a:73:e1:46:79
bwn0: firmware version (rev 410 patch 2160 date 0x751a time 0x7c0a)
bwn0: status of RF switch is changed to OFF
bwn0: please turn on the RF switch
bwn0: need multicast update callback
bwn0: RX decryption attempted (old 0 keyidx 0x1)
bwn0: need multicast update callback
bwn0: need multicast update callback
bwn0: RX decryption attempted (old 0 keyidx 0x1)
hostb0 at pci0:0:0:0: class=0x060000 card=0x30c2103c chip=0x79101002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'RS690 Host Bridge'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:0:1:0: class=0x060400 card=0x30c2103c chip=0x79121002 rev=0x00 hdr=0x01
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'RS690 PCI to PCI Bridge (Internal gfx)'
class = bridge
subclass = PCI-PCI
pcib2 at pci0:0:4:0: class=0x060400 card=0x30c2103c chip=0x79141002 rev=0x00 hdr=0x01
vendor = 'Advanced Micro Devices [AMD] nee ATI'
class = bridge
subclass = PCI-PCI
pcib3 at pci0:0:5:0: class=0x060400 card=0x30c2103c chip=0x79151002 rev=0x00 hdr=0x01
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'RS690 PCI to PCI Bridge (PCI Express Port 1)'
class = bridge
subclass = PCI-PCI
pcib4 at pci0:0:6:0: class=0x060400 card=0x30c2103c chip=0x79161002 rev=0x00 hdr=0x01
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'RS690 PCI to PCI Bridge (PCI Express Port 2)'
class = bridge
subclass = PCI-PCI
ahci0 at pci0:0:18:0: class=0x01018f card=0x43801002 chip=0x43801002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB600 Non-Raid-5 SATA'
class = mass storage
subclass = ATA
ohci0 at pci0:0:19:0: class=0x0c0310 card=0x30c2103c chip=0x43871002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB600 USB (OHCI0)'
class = serial bus
subclass = USB
ohci1 at pci0:0:19:1: class=0x0c0310 card=0x30c2103c chip=0x43881002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB600 USB (OHCI1)'
class = serial bus
subclass = USB
ohci2 at pci0:0:19:2: class=0x0c0310 card=0x30c2103c chip=0x43891002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB600 USB (OHCI2)'
class = serial bus
subclass = USB
ohci3 at pci0:0:19:3: class=0x0c0310 card=0x30c2103c chip=0x438a1002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB600 USB (OHCI3)'
class = serial bus
subclass = USB
ohci4 at pci0:0:19:4: class=0x0c0310 card=0x30c2103c chip=0x438b1002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB600 USB (OHCI4)'
class = serial bus
subclass = USB
ehci0 at pci0:0:19:5: class=0x0c0320 card=0x30c2103c chip=0x43861002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB600 USB Controller (EHCI)'
class = serial bus
subclass = USB
none0 at pci0:0:20:0: class=0x0c0500 card=0x30c2103c chip=0x43851002 rev=0x14 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SBx00 SMBus Controller'
class = serial bus
subclass = SMBus
atapci0 at pci0:0:20:1: class=0x010182 card=0x30c2103c chip=0x438c1002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB600 IDE'
class = mass storage
subclass = ATA
hdac0 at pci0:0:20:2: class=0x040300 card=0x30c2103c chip=0x43831002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SBx00 Azalia (Intel HDA)'
class = multimedia
subclass = HDA
isab0 at pci0:0:20:3: class=0x060100 card=0x30c2103c chip=0x438d1002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SB600 PCI to LPC Bridge'
class = bridge
subclass = PCI-ISA
pcib5 at pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 hdr=0x01
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'SBx00 PCI to PCI Bridge'
class = bridge
subclass = PCI-PCI
hostb1 at pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'
class = bridge
subclass = HOST-PCI
hostb2 at pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'K8 [Athlon64/Opteron] Address Map'
class = bridge
subclass = HOST-PCI
hostb3 at pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'K8 [Athlon64/Opteron] DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb4 at pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD]'
device = 'K8 [Athlon64/Opteron] Miscellaneous Control'
class = bridge
subclass = HOST-PCI
vgapci0 at pci0:1:5:0: class=0x030000 card=0x30c2103c chip=0x791f1002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices [AMD] nee ATI'
device = 'RS690M [Radeon X1200 Series]'
class = display
subclass = VGA
bge0 at pci0:16:0:0: class=0x020000 card=0x30c2103c chip=0x171314e4 rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetLink BCM5906M Fast Ethernet PCI Express'
class = network
subclass = ethernet
siba_bwn0 at pci0:48:0:0: class=0x028000 card=0x1371103c chip=0x431214e4 rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM4311 802.11a/b/g'
class = network
cbb0 at pci0:2:4:0: class=0x060700 card=0x30c2103c chip=0x04761180 rev=0xb6 hdr=0x02
vendor = 'Ricoh Co Ltd'
device = 'RL5c476 II'
class = bridge
subclass = PCI-CardBus
More information about the freebsd-x11
mailing list