Intel GPU patch 13.5 for stable/9 ([CFT] Xorg Upgrade 7.5.2)

Luca Pizzamiglio l.pizzamiglio at bally-wulff.de
Fri Mar 23 13:43:50 UTC 2012


AFAIK, the vt switch is not yet implemented.

and, when I unload the module I get panic too (I guess is a problem with 
i2c modules).

Best regards,
Luca

On 03/23/12 13:15, lial wrote:
> Hello all:
>      I'v patch  13.5 for stable/9 for my Lenovo x201i Notebook ,I make build
> kernel and Xorg 7.5.2 WITH_KMS=yes WITH_NEW_XORG=yes , the driver of Video
> is xf86-video-intel-2.17.0 .When I start X ,I found:
>     1. I can't switch to other ttys;
>     2. When I quit FVWM2.64  ,the system halted;
> any advice?
>
> #dmesg
> Copyright (c) 1992-2012 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 9.0-STABLE #1: Tue Mar 13 16:20:32 UTC 2012
>      root at lial.lialdomain:/usr/obj/usr/src/stable/9/sys/GENERIC i386
> CPU: Intel(R) Core(TM) i3 CPU       M 350  @ 2.27GHz (2261.06-MHz 686-class
> CPU)
>    Origin = "GenuineIntel"  Id = 0x20655  Family = 6  Model = 25  Stepping =
> 5
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
> Features2=0x9ae3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT>
>    AMD Features=0x28100000<NX,RDTSCP,LM>
>    AMD Features2=0x1<LAHF>
>    TSC: P-state invariant, performance statistics
> real memory  = 2147483648 (2048 MB)
> avail memory = 1942237184 (1852 MB)
> Event timer "LAPIC" quality 600
> ACPI APIC Table:<LENOVO TP-6Q>
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
>   cpu0 (BSP): APIC ID:  0
>   cpu1 (AP): APIC ID:  1
>   cpu2 (AP): APIC ID:  4
>   cpu3 (AP): APIC ID:  5
> ioapic0: Changing APIC ID to 1
> ioapic0<Version 2.0>  irqs 0-23 on motherboard
> kbd1 at kbdmux0
> ctl: CAM Target Layer loaded
> acpi0:<LENOVO TP-6Q>  on motherboard
> acpi_ec0:<Embedded Controller: GPE 0x11, ECDT>  port 0x62,0x66 on acpi0
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, 7bf00000 (3) failed
> cpu0:<ACPI CPU>  on acpi0
> cpu1:<ACPI CPU>  on acpi0
> cpu2:<ACPI CPU>  on acpi0
> cpu3:<ACPI CPU>  on acpi0
> attimer0:<AT timer>  port 0x40-0x43 irq 0 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> hpet0:<High Precision Event Timer>  iomem 0xfed00000-0xfed003ff on acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 950
> Event timer "HPET" frequency 14318180 Hz quality 550
> Event timer "HPET1" frequency 14318180 Hz quality 440
> Event timer "HPET2" frequency 14318180 Hz quality 440
> Event timer "HPET3" frequency 14318180 Hz quality 440
> Event timer "HPET4" frequency 14318180 Hz quality 440
> atrtc0:<AT realtime clock>  port 0x70-0x71 irq 8 on acpi0
> Event timer "RTC" frequency 32768 Hz quality 0
> Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
> acpi_timer0:<24-bit timer at 3.579545MHz>  port 0x1008-0x100b on acpi0
> acpi_lid0:<Control Method Lid Switch>  on acpi0
> acpi_button0:<Sleep Button>  on acpi0
> pcib0:<ACPI Host-PCI bridge>  on acpi0
> pci255:<ACPI PCI bus>  on pcib0
> pcib1:<ACPI Host-PCI bridge>  port 0xcf8-0xcff on acpi0
> pci0:<ACPI PCI bus>  on pcib1
> vgapci0:<VGA-compatible display>  port 0x1800-0x1807 mem
> 0xf2000000-0xf23fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
> agp0:<Intel Ironlake (M) SVGA controller>  on vgapci0
> agp0: aperture size is 256M, detected 32764k stolen memory
> pci0:<simple comms>  at device 22.0 (no driver attached)
> em0:<Intel(R) PRO/1000 Network Connection 7.2.3>  port 0x1820-0x183f mem
> 0xf2500000-0xf251ffff,0xf2525000-0xf2525fff irq 20 at device 25.0 on pci0
> em0: Using an MSI interrupt
> em0: Ethernet address: f0:de:f1:04:06:a6
> ehci0:<Intel PCH USB 2.0 controller USB-B>  mem 0xf2728000-0xf27283ff irq 23
> at device 26.0 on pci0
> usbus0: EHCI version 1.0
> usbus0:<Intel PCH USB 2.0 controller USB-B>  on ehci0
> hdac0:<Intel 5 Series/3400 Series High Definition Audio Controller>  mem
> 0xf2520000-0xf2523fff irq 17 at device 27.0 on pci0
> pcib2:<ACPI PCI-PCI bridge>  irq 20 at device 28.0 on pci0
> pci13:<ACPI PCI bus>  on pcib2
> pcib3:<ACPI PCI-PCI bridge>  irq 23 at device 28.3 on pci0
> pci5:<ACPI PCI bus>  on pcib3
> pcib4:<ACPI PCI-PCI bridge>  irq 20 at device 28.4 on pci0
> pci2:<ACPI PCI bus>  on pcib4
> iwn0:<Intel(R) Centrino(R) Wireless-N 1000>  mem 0xf2400000-0xf2401fff irq
> 16 at device 0.0 on pci2
> ehci1:<Intel PCH USB 2.0 controller USB-A>  mem 0xf2728400-0xf27287ff irq 19
> at device 29.0 on pci0
> usbus1: EHCI version 1.0
> usbus1:<Intel PCH USB 2.0 controller USB-A>  on ehci1
> pcib5:<ACPI PCI-PCI bridge>  at device 30.0 on pci0
> pci14:<ACPI PCI bus>  on pcib5
> isab0:<PCI-ISA bridge>  at device 31.0 on pci0
> isa0:<ISA bus>  on isab0
> ahci0:<Intel 5 Series/3400 Series AHCI SATA controller>  port
> 0x1860-0x1867,0x1814-0x1817,0x1818-0x181f,0x1810-0x1813,0x1840-0x185f mem
> 0xf2727000-0xf27277ff irq 16 at device 31.2 on pci0
> ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported
> ahcich0:<AHCI channel>  at channel 0 on ahci0
> ahcich1:<AHCI channel>  at channel 1 on ahci0
> ahcich4:<AHCI channel>  at channel 4 on ahci0
> ahcich5:<AHCI channel>  at channel 5 on ahci0
> pci0:<serial bus, SMBus>  at device 31.3 (no driver attached)
> pci0:<dasp>  at device 31.6 (no driver attached)
> acpi_tz0:<Thermal Zone>  on acpi0
> atkbdc0:<Keyboard controller (i8042)>  port 0x60,0x64 irq 1 on acpi0
> atkbd0:<AT Keyboard>  irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0:<PS/2 Mouse>  irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0
> battery0:<ACPI Control Method Battery>  on acpi0
> acpi_acad0:<AC Adapter>  on acpi0
> pmtimer0 on isa0
> orm0:<ISA Option ROMs>  at iomem
> 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdd000-0xdffff,0xe0000-0xeffff
> pnpid ORM0000 on isa0
> sc0:<System console>  at flags 0x100 on isa0
> sc0: VGA<16 virtual consoles, flags=0x300>
> vga0:<Generic ISA VGA>  at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ata0:<ATA channel>  at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
> ata1:<ATA channel>  at port 0x170-0x177,0x376 irq 15 on isa0
> ppc0: parallel port not found.
> est0:<Enhanced SpeedStep Frequency Control>  on cpu0
> p4tcc0:<CPU Frequency Thermal Control>  on cpu0
> est1:<Enhanced SpeedStep Frequency Control>  on cpu1
> p4tcc1:<CPU Frequency Thermal Control>  on cpu1
> est2:<Enhanced SpeedStep Frequency Control>  on cpu2
> p4tcc2:<CPU Frequency Thermal Control>  on cpu2
> est3:<Enhanced SpeedStep Frequency Control>  on cpu3
> p4tcc3:<CPU Frequency Thermal Control>  on cpu3
> Timecounters tick every 1.000 msec
> hdac0: HDA Codec #0: Conexant CX20585
> hdac0: HDA Codec #3: Intel Ibex Peak HDMI
> pcm0:<HDA Conexant CX20585 PCM #0 Analog>  at cad 0 nid 1 on hdac0
> pcm1:<HDA Conexant CX20585 PCM #1 Analog>  at cad 0 nid 1 on hdac0
> pcm2:<HDA Intel Ibex Peak HDMI PCM #0 DisplayPort>  at cad 3 nid 1 on hdac0
> usbus0: 480Mbps High Speed USB v2.0
> usbus1: 480Mbps High Speed USB v2.0
> ugen0.1:<Intel>  at usbus0
> uhub0:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>  on usbus0
> ugen1.1:<Intel>  at usbus1
> uhub1:<Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1>  on usbus1
> uhub0: 3 ports with 3 removable, self powered
> uhub1: 3 ports with 3 removable, self powered
> ugen0.2:<vendor 0x8087>  at usbus0
> uhub2:<vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2>  on
> usbus0
> ugen1.2:<vendor 0x8087>  at usbus1
> uhub3:<vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2>  on
> usbus1
> uhub2: 6 ports with 6 removable, self powered
> uhub3: 8 ports with 8 removable, self powered
> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> ada0:<SAMSUNG HM250HI 2AC101C4>  ATA-8 SATA 2.x device
> ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad4
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #2 Launched!
> Trying to mount root from ufs:/dev/ada0s1a [rw]...
> drm0:<Intel IronLake>  on vgapci0
> info: [drm] MSI enabled 1 message(s)
> info: [drm] AGP at 0xd0000000 256MB
> iicbus0:<Philips I2C bus>  on iicbb0 addr 0xc8
> iic0:<I2C generic I/O>  on iicbus0
> iic1:<I2C generic I/O>  on iicbus1
> iicbus2:<Philips I2C bus>  on iicbb1 addr 0x0
> iic2:<I2C generic I/O>  on iicbus2
> iic3:<I2C generic I/O>  on iicbus3
> iicbus4:<Philips I2C bus>  on iicbb2 addr 0x0
> iic4:<I2C generic I/O>  on iicbus4
> iic5:<I2C generic I/O>  on iicbus5
> iicbus6:<Philips I2C bus>  on iicbb3 addr 0x0
> iic6:<I2C generic I/O>  on iicbus6
> iic7:<I2C generic I/O>  on iicbus7
> iicbus8:<Philips I2C bus>  on iicbb4 addr 0x0
> iic8:<I2C generic I/O>  on iicbus8
> iic9:<I2C generic I/O>  on iicbus9
> iicbus10:<Philips I2C bus>  on iicbb5 addr 0x0
> iic10:<I2C generic I/O>  on iicbus10
> iic11:<I2C generic I/O>  on iicbus11
> iicbus12:<Philips I2C bus>  on iicbb6 addr 0x0
> iic12:<I2C generic I/O>  on iicbus12
> iic13:<I2C generic I/O>  on iicbus13
> iicbus14:<Philips I2C bus>  on iicbb7 addr 0x0
> iic14:<I2C generic I/O>  on iicbus14
> iic15:<I2C generic I/O>  on iicbus15
> info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> info: [drm] Driver supports precise vblank timestamp query.
> [drm:KMS:pid2520:intel_detect_pch] Found Ibex Peak PCH
> [drm:KMS:pid2520:init_vbt_defaults] Set default to SSC at 100MHz
> [drm:KMS:pid2520:intel_parse_bios] Using VBT from OpRegion: $VBT
> IRONLAKE-MOBILEd
> [drm:KMS:pid2520:parse_general_features] BDB_GENERAL_FEATURES int_tv_support
> 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 0
> [drm:KMS:pid2520:parse_general_definitions] crt_ddc_bus_pin: 2
> [drm:KMS:pid2520:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
> [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 0 69300
> 1280 1304 1336 1408 800 804 808 820 0x8 0xa
> [drm:KMS:pid2520:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT
> tables:
> [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0
> 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
> [drm:KMS:pid2520:parse_sdvo_device_mapping] No SDVO device info is found in
> VBT
> [drm:KMS:pid2520:intel_modeset_init] 2 display pipes available.
> [drm:KMS:pid2520:intel_modeset_init] plane 0 init failed: -19
> [drm:KMS:pid2520:intel_modeset_init] plane 1 init failed: -19
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 0
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 0
> [drm:KMS:pid2520:intel_crt_init] pch crt adpa set to 0xf40018
> [drm:KMS:pid2520:intel_setup_outputs] HDMIB 0 PCH_DP_B 0 HDMIC 1 HDMID 0
> PCH_DP_C 1 PCH_DP_D 0 LVDS 1
> [drm:KMS:pid2520:intel_dp_i2c_init] i2c_init DPDDC-C
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:intel_dp_i2c_aux_ch] aux_ch failed -60
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:intel_dp_i2c_aux_ch] aux_ch failed -60
> [drm:KMS:pid2520:ironlake_crtc_dpms] crtc 0/0 dpms off
> [drm:KMS:pid2520:intel_update_fbc]
> [drm:KMS:pid2520:ironlake_crtc_dpms] crtc 1/1 dpms off
> [drm:KMS:pid2520:intel_update_fbc]
> [drm:KMS:pid2520:ironlake_init_pch_refclk] has_panel 1 has_lvds 1
> has_pch_edp 0 has_cpu_edp 0 has_ck505 0
> drm0: taking over the fictitious range 0xd0000000-0xe0000000
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:5:LVDS-1]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:5:LVDS-1] probed modes :
> [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 21:"1280x800" 50
> 57790 1280 1304 1336 1408 800 804 808 820 0x40 0x5
> [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 20:"1280x800" 60
> 69300 1280 1304 1336 1408 800 804 808 820 0x48 0x5
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:12:VGA-1]
> [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] trigger hotplug detect
> cycle: adpa=0xf40018
> [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] ironlake hotplug
> adpa=0xf40018, result 0
> [drm:KMS:pid2520:intel_crt_detect] CRT not detected via hotplug
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:12:VGA-1] disconnected
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:15:HDMI-A-1]
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5
> [drm:KMS:pid2520:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc
> port 4
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:15:HDMI-A-1] disconnected
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:18:DP-1]
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:18:DP-1] disconnected
> [drm:KMS:pid2520:drm_setup_crtcs]
> [drm:KMS:pid2520:drm_enable_connectors] connector 5 enabled? yes
> [drm:KMS:pid2520:drm_enable_connectors] connector 12 enabled? no
> [drm:KMS:pid2520:drm_enable_connectors] connector 15 enabled? no
> [drm:KMS:pid2520:drm_enable_connectors] connector 18 enabled? no
> [drm:KMS:pid2520:drm_target_preferred] looking for cmdline mode on connector
> 5
> [drm:KMS:pid2520:drm_target_preferred] looking for preferred mode on
> connector 5
> [drm:KMS:pid2520:drm_target_preferred] found mode 1280x800
> [drm:KMS:pid2520:drm_setup_crtcs] picking CRTCs for 8192x8192 config
> [drm:KMS:pid2520:drm_setup_crtcs] desired mode 1280x800 set on crtc 3
> [drm:KMS:pid2520:intelfb_create] allocated 1280x800 fb: 0x00043000, bo
> 0xc8135b00
> info: [drm] Initialized i915 1.6.0 20080730
> [drm:KMS:pid2520:i915_getparam] Unknown parameter 17
> [drm:KMS:pid2520:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4]
> [drm:KMS:pid2520:drm_mode_getresources] [CRTC:3]
> [drm:KMS:pid2520:drm_mode_getresources] [CRTC:4]
> [drm:KMS:pid2520:drm_mode_getresources] [ENCODER:6:LVDS-6]
> [drm:KMS:pid2520:drm_mode_getresources] [ENCODER:13:DAC-13]
> [drm:KMS:pid2520:drm_mode_getresources] [ENCODER:14:TMDS-14]
> [drm:KMS:pid2520:drm_mode_getresources] [ENCODER:19:TMDS-19]
> [drm:KMS:pid2520:drm_mode_getresources] [CONNECTOR:5:LVDS-1]
> [drm:KMS:pid2520:drm_mode_getresources] [CONNECTOR:12:VGA-1]
> [drm:KMS:pid2520:drm_mode_getresources] [CONNECTOR:15:HDMI-A-1]
> [drm:KMS:pid2520:drm_mode_getresources] [CONNECTOR:18:DP-1]
> [drm:KMS:pid2520:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4]
> [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:5:?]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:5:LVDS-1]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:5:LVDS-1] probed modes :
> [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 20:"1280x800" 60
> 69300 1280 1304 1336 1408 800 804 808 820 0x48 0x5
> [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 21:"1280x800" 50
> 57790 1280 1304 1336 1408 800 804 808 820 0x40 0x5
> [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:5:?]
> [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:12:?]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:12:VGA-1]
> [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] ironlake hotplug
> adpa=0xf40018, result 0
> [drm:KMS:pid2520:intel_crt_detect] CRT not detected via hotplug
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:12:VGA-1] disconnected
> [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:12:?]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:12:VGA-1]
> [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] ironlake hotplug
> adpa=0xf40018, result 0
> [drm:KMS:pid2520:intel_crt_detect] CRT not detected via hotplug
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:12:VGA-1] disconnected
> [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:15:?]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:15:HDMI-A-1]
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5
> [drm:KMS:pid2520:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc
> port 4
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:15:HDMI-A-1] disconnected
> [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:15:?]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:15:HDMI-A-1]
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5
> [drm:KMS:pid2520:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc
> port 4
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:15:HDMI-A-1] disconnected
> [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:18:?]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:18:DP-1]
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:18:DP-1] disconnected
> [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:18:?]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:18:DP-1]
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:18:DP-1] disconnected
> [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:5:?]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:5:LVDS-1]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:5:LVDS-1] probed modes :
> [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 20:"1280x800" 60
> 69300 1280 1304 1336 1408 800 804 808 820 0x48 0x5
> [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 21:"1280x800" 50
> 57790 1280 1304 1336 1408 800 804 808 820 0x40 0x5
> [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:5:?]
> [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:12:?]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:12:VGA-1]
> [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] ironlake hotplug
> adpa=0xf40018, result 0
> [drm:KMS:pid2520:intel_crt_detect] CRT not detected via hotplug
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:12:VGA-1] disconnected
> [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:12:?]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:12:VGA-1]
> [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] ironlake hotplug
> adpa=0xf40018, result 0
> [drm:KMS:pid2520:intel_crt_detect] CRT not detected via hotplug
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:12:VGA-1] disconnected
> [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:15:?]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:15:HDMI-A-1]
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5
> [drm:KMS:pid2520:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc
> port 4
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:15:HDMI-A-1] disconnected
> [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:15:?]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:15:HDMI-A-1]
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5
> [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5
> [drm:KMS:pid2520:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc
> port 4
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:15:HDMI-A-1] disconnected
> [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:18:?]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:18:DP-1]
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:18:DP-1] disconnected
> [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:18:?]
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:18:DP-1]
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid2520:drm_helper_probe_single_connector_modes]
> [CONNECTOR:18:DP-1] disconnected
> [drm:KMS:pid2520:drm_mode_addfb] [FB:22]
> [drm:KMS:pid2520:drm_mode_setcrtc] [CRTC:3]
> [drm:KMS:pid2520:drm_mode_setcrtc] [CONNECTOR:5:LVDS-1]
> [drm:KMS:pid2520:drm_crtc_helper_set_config]
> [drm:KMS:pid2520:drm_crtc_helper_set_config] [CRTC:3] [FB:22] #connectors=1
> (x y) (0 0)
> [drm:KMS:pid2520:drm_crtc_helper_set_config] crtc has no fb, full mode set
> [drm:KMS:pid2520:drm_crtc_helper_set_config] modes are different, full mode
> set
> [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0
> 0 0 0x0 0x0
> [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 23:"1280x800" 0
> 69300 1280 1304 1336 1408 800 804 808 820 0x0 0x5
> [drm:KMS:pid2520:drm_crtc_helper_set_config] encoder changed, full mode
> switch
> [drm:KMS:pid2520:drm_crtc_helper_set_config] crtc changed, full mode switch
> [drm:KMS:pid2520:drm_crtc_helper_set_config] [CONNECTOR:5:LVDS-1] to
> [CRTC:3]
> [drm:KMS:pid2520:drm_crtc_helper_set_config] attempting to set mode from
> userspace
> [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 23:"1280x800" 0
> 69300 1280 1304 1336 1408 800 804 808 820 0x0 0x5
> [drm:KMS:pid2520:drm_crtc_helper_set_mode] [CRTC:3]
> [drm:KMS:pid2520:ironlake_get_refclk] using SSC reference clock of 120 MHz
> [drm:KMS:pid2520:intel_choose_pipe_bpp_dither] clamping display bpc (was -1)
> to LVDS (6)
> [drm:KMS:pid2520:intel_choose_pipe_bpp_dither] setting pipe bpc to 8 (max
> display bpc 6)
> [drm:KMS:pid2520:ironlake_crtc_mode_set] Mode for pipe 0:
> [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 23:"1280x800" 0
> 69300 1280 1304 1336 1408 800 804 808 820 0x0 0x5
> [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out
> [drm:KMS:pid2520:ironlake_update_plane] Writing base 0042B000 00000000 0 0
> 5120
> [drm:KMS:pid2520:intel_update_fbc]
> [drm:KMS:pid2520:ironlake_update_wm] FIFO watermarks For pipe A - plane 6,
> cursor: 6
> [drm:KMS:pid2520:ironlake_check_srwm] watermark 1: display plane 24, fbc
> lines 3, cursor 6
> [drm:KMS:pid2520:ironlake_check_srwm] watermark 2: display plane 76, fbc
> lines 3, cursor 6
> [drm:KMS:pid2520:drm_crtc_helper_set_mode] [ENCODER:6:LVDS-6] set
> [MODE:23:1280x800]
> [drm:KMS:pid2520:ironlake_update_wm] FIFO watermarks For pipe A - plane 6,
> cursor: 6
> [drm:KMS:pid2520:ironlake_check_srwm] watermark 1: display plane 24, fbc
> lines 3, cursor 6
> [drm:KMS:pid2520:ironlake_check_srwm] watermark 2: display plane 76, fbc
> lines 3, cursor 6
> [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out
> [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out
> [drm:KMS:pid2520:ironlake_fdi_link_train] FDI_RX_IIR 0x700
> [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train 1 done.
> [drm:KMS:pid2520:ironlake_fdi_link_train] FDI_RX_IIR 0x600
> [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train 2 done.
> [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train done
> [drm:KMS:pid2520:intel_update_fbc]
> [drm:KMS:pid2520:drm_crtc_helper_set_config] Setting connector DPMS state to
> on
> [drm:KMS:pid2520:drm_crtc_helper_set_config] 	[CONNECTOR:5:LVDS-1] set DPMS
> on
> [drm:KMS:pid2520:intel_crtc_cursor_set]
> [drm:KMS:pid0:intel_ironlake_crt_detect_hotplug] ironlake hotplug
> adpa=0xf40018, result 0
> [drm:KMS:pid0:intel_crt_detect] CRT not detected via hotplug
> [drm:KMS:pid0:output_poll_execute] [CONNECTOR:12:VGA-1] status updated from
> 2 to 2
> [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5
> [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5
> [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5
> [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5
> [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5
> [drm:KMS:pid0:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc
> port 4
> [drm:KMS:pid0:output_poll_execute] [CONNECTOR:15:HDMI-A-1] status updated
> from 2 to 2
> [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e
> [drm:KMS:pid0:output_poll_execute] [CONNECTOR:18:DP-1] status updated from 2
> to 2
> [drm:KMS:pid2520:intel_crtc_cursor_set]
> [drm:KMS:pid2520:intel_crtc_cursor_set] cursor off
> [drm:KMS:pid2520:ironlake_crtc_dpms] crtc 0/0 dpms off
> [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out
> [drm:KMS:pid2520:ironlake_update_wm] FIFO watermarks For pipe A - plane 6,
> cursor: 6
> [drm:KMS:pid2520:ironlake_check_srwm] watermark 1: display plane 24, fbc
> lines 3, cursor 6
> [drm:KMS:pid2520:ironlake_check_srwm] watermark 2: display plane 76, fbc
> lines 3, cursor 6
> [drm:KMS:pid2520:intel_update_fbc]
> [drm:KMS:pid2520:ironlake_crtc_dpms] crtc 0/0 dpms on
> [drm:KMS:pid2520:ironlake_update_wm] FIFO watermarks For pipe A - plane 6,
> cursor: 6
> [drm:KMS:pid2520:ironlake_check_srwm] watermark 1: display plane 24, fbc
> lines 3, cursor 6
> [drm:KMS:pid2520:ironlake_check_srwm] watermark 2: display plane 76, fbc
> lines 3, cursor 6
> [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out
> [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out
> [drm:KMS:pid2520:ironlake_fdi_link_train] FDI_RX_IIR 0x100
> [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train 1 done.
> [drm:KMS:pid2520:ironlake_fdi_link_train] FDI_RX_IIR 0x600
> [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train 2 done.
> [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train done
> [drm:KMS:pid2520:intel_update_fbc]
> [drm:KMS:pid2520:intel_crtc_cursor_set]
> wlan0: link state changed to DOWN
> wlan0: link state changed to UP
> [drm:KMS:pid2520:intel_crtc_cursor_set]
> [drm:KMS:pid2520:intel_crtc_cursor_set] cursor off
> [drm:KMS:pid2520:intel_crtc_cursor_set]
> [drm:KMS:pid2520:intel_crtc_cursor_set]
> [drm:KMS:pid2520:intel_crtc_cursor_set] cursor off
> [drm:KMS:pid2520:intel_crtc_cursor_set]
> [drm:KMS:pid2520:intel_crtc_cursor_set]
> [drm:KMS:pid2520:intel_crtc_cursor_set] cursor off
>
> #cat /var/log/Xorg.0.log
> X.Org X Server 1.10.6
> Release Date: 2012-02-10
> [  7565.306] X Protocol Version 11, Revision 0
> [  7565.306] Build Operating System: FreeBSD 9.0-STABLE i386
> [  7565.306] Current Operating System: FreeBSD lial.lialdomain 9.0-STABLE
> FreeBSD 9.0-STABLE #1: Tue Mar 13 16:20:32 UTC 2012
> root at lial.lialdomain:/usr/obj/usr/src/stable/9/sys/GENERIC i386
> [  7565.306] Build Date: 13 March 2012  09:36:38PM
> [  7565.306]
> [  7565.306] Current version of pixman: 0.24.2
> [  7565.306] 	Before reporting problems, check http://wiki.x.org
> 	to make sure that you have the latest version.
> [  7565.306] Markers: (--) probed, (**) from config file, (==) default
> setting,
> 	(++) from command line, (!!) notice, (II) informational,
> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [  7565.306] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 17:59:08
> 2012
> [  7565.390] (==) Using config file: "/etc/X11/xorg.conf"
> [  7565.412] (==) ServerLayout "X.org Configured"
> [  7565.412] (**) |-->Screen "Screen0" (0)
> [  7565.412] (**) |   |-->Monitor "Monitor0"
> [  7565.412] (**) |   |-->Device "Card0"
> [  7565.412] (**) |-->Input Device "Mouse0"
> [  7565.412] (**) |-->Input Device "Keyboard0"
> [  7565.412] (**) Option "AutoAddDevices" "FALSE"
> [  7565.412] (**) Not automatically adding devices
> [  7565.412] (==) Automatically enabling devices
> [  7565.521] (WW) The directory "/usr/local/lib/X11/fonts/msdos/" does not
> exist.
> [  7565.521] 	Entry deleted from font path.
> [  7565.580] (**) FontPath set to:
> 	/usr/local/lib/X11/fonts/misc/,
> 	/usr/local/lib/X11/fonts/OTF,
> 	/usr/local/lib/X11/fonts/wqy/,
> 	/usr/local/lib/X11/fonts/TTF/,
> 	/usr/local/lib/X11/fonts/Type1/,
> 	/usr/local/lib/X11/fonts/100dpi/,
> 	/usr/local/lib/X11/fonts/75dpi/,
> 	${prefix}/share/fonts/X11/misc/,
> 	${prefix}/share/fonts/X11/TTF/,
> 	${prefix}/share/fonts/X11/OTF/,
> 	${prefix}/share/fonts/X11/Type1/,
> 	${prefix}/share/fonts/X11/100dpi/,
> 	${prefix}/share/fonts/X11/75dpi/
> [  7565.580] (**) ModulePath set to "/usr/local/lib/xorg/modules"
> [  7565.580] (II) Loader magic: 0x81ef100
> [  7565.580] (II) Module ABI versions:
> [  7565.580] 	X.Org ANSI C Emulation: 0.4
> [  7565.580] 	X.Org Video Driver: 10.0
> [  7565.580] 	X.Org XInput driver : 12.2
> [  7565.580] 	X.Org Server Extension : 5.0
> [  7565.580] (--) PCI:*(0:0:2:0) 8086:0046:17aa:215a rev 2, Mem @
> 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8, BIOS @
> 0x????????/65536
> [  7565.580] (II) "extmod" will be loaded. This was enabled by default and
> also specified in the config file.
> [  7565.580] (II) "dbe" will be loaded. This was enabled by default and also
> specified in the config file.
> [  7565.580] (II) "glx" will be loaded. This was enabled by default and also
> specified in the config file.
> [  7565.580] (II) "record" will be loaded. This was enabled by default and
> also specified in the config file.
> [  7565.580] (II) "dri" will be loaded. This was enabled by default and also
> specified in the config file.
> [  7565.580] (II) "dri2" will be loaded. This was enabled by default and
> also specified in the config file.
> [  7565.580] (II) LoadModule: "extmod"
> [  7565.613] (II) Loading
> /usr/local/lib/xorg/modules/extensions/libextmod.so
> [  7565.615] (II) Module extmod: vendor="X.Org Foundation"
> [  7565.615] 	compiled for 1.10.6, module version = 1.0.0
> [  7565.615] 	Module class: X.Org Server Extension
> [  7565.615] 	ABI class: X.Org Server Extension, version 5.0
> [  7565.615] (II) Loading extension MIT-SCREEN-SAVER
> [  7565.615] (II) Loading extension XFree86-VidModeExtension
> [  7565.615] (II) Loading extension XFree86-DGA
> [  7565.615] (II) Loading extension DPMS
> [  7565.615] (II) Loading extension XVideo
> [  7565.615] (II) Loading extension XVideo-MotionCompensation
> [  7565.615] (II) Loading extension X-Resource
> [  7565.615] (II) LoadModule: "record"
> [  7565.615] (II) Loading
> /usr/local/lib/xorg/modules/extensions/librecord.so
> [  7565.617] (II) Module record: vendor="X.Org Foundation"
> [  7565.617] 	compiled for 1.10.6, module version = 1.13.0
> [  7565.617] 	Module class: X.Org Server Extension
> [  7565.617] 	ABI class: X.Org Server Extension, version 5.0
> [  7565.617] (II) Loading extension RECORD
> [  7565.617] (II) LoadModule: "dbe"
> [  7565.618] (II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so
> [  7565.618] (II) Module dbe: vendor="X.Org Foundation"
> [  7565.618] 	compiled for 1.10.6, module version = 1.0.0
> [  7565.618] 	Module class: X.Org Server Extension
> [  7565.618] 	ABI class: X.Org Server Extension, version 5.0
> [  7565.618] (II) Loading extension DOUBLE-BUFFER
> [  7565.618] (II) LoadModule: "glx"
> [  7565.618] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
> [  7565.624] (II) Module glx: vendor="X.Org Foundation"
> [  7565.624] 	compiled for 1.10.6, module version = 1.0.0
> [  7565.624] 	ABI class: X.Org Server Extension, version 5.0
> [  7565.624] (==) AIGLX disabled
> [  7565.624] (II) Loading extension GLX
> [  7565.625] (II) LoadModule: "dri"
> [  7565.625] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so
> [  7565.643] (II) Module dri: vendor="X.Org Foundation"
> [  7565.643] 	compiled for 1.10.6, module version = 1.0.0
> [  7565.643] 	ABI class: X.Org Server Extension, version 5.0
> [  7565.643] (II) Loading extension XFree86-DRI
> [  7565.643] (II) LoadModule: "dri2"
> [  7565.644] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
> [  7565.644] (II) Module dri2: vendor="X.Org Foundation"
> [  7565.644] 	compiled for 1.10.6, module version = 1.2.0
> [  7565.644] 	ABI class: X.Org Server Extension, version 5.0
> [  7565.644] (II) Loading extension DRI2
> [  7565.644] (II) LoadModule: "intel"
> [  7565.660] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
> [  7565.699] (II) Module intel: vendor="X.Org Foundation"
> [  7565.699] 	compiled for 1.10.6, module version = 2.17.0
> [  7565.699] 	Module class: X.Org Video Driver
> [  7565.699] 	ABI class: X.Org Video Driver, version 10.0
> [  7565.699] (II) LoadModule: "mouse"
> [  7565.699] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
> [  7565.700] (II) Module mouse: vendor="X.Org Foundation"
> [  7565.700] 	compiled for 1.10.6, module version = 1.7.1
> [  7565.700] 	Module class: X.Org XInput Driver
> [  7565.700] 	ABI class: X.Org XInput driver, version 12.2
> [  7565.700] (II) LoadModule: "kbd"
> [  7565.700] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
> [  7565.701] (II) Module kbd: vendor="X.Org Foundation"
> [  7565.701] 	compiled for 1.10.6, module version = 1.6.1
> [  7565.701] 	Module class: X.Org XInput Driver
> [  7565.701] 	ABI class: X.Org XInput driver, version 12.2
> [  7565.701] (II) intel: Driver for Intel Integrated Graphics Chipsets:
> i810,
> 	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
> 	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
> 	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
> 	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
> 	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
> 	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
> 	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
> 	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
> 	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
> [  7565.701] (--) Using syscons driver with X support (version 2.0)
> [  7565.701] (--) using VT number 9
>
> [  7565.726] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
> [  7565.726] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card
> support
> [  7565.727] drmOpenDevice: node name is /dev/dri/card0
> [  7565.727] Failed to change owner or group for file /dev/dri! 2: No such
> file or directory
> [  7565.727] Failed to change owner or group for file /dev/dri/card0! 2: No
> such file or directory
> [  7565.727] drmOpenDevice: open result is -1, (No such file or directory)
> [  7565.727] Failed to change owner or group for file /dev/dri/card0! 2: No
> such file or directory
> [  7565.727] drmOpenDevice: open result is -1, (No such file or directory)
> [  7565.727] drmOpenDevice: Open failed
> [  7566.864] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> [  7566.864] drmOpenDevice: node name is /dev/dri/card0
> [  7566.864] drmOpenDevice: open result is 10, (OK)
> [  7566.864] drmOpenByBusid: drmOpenMinor returns 10
> [  7566.864] drmOpenByBusid: Interface 1.4 failed, trying 1.1
> [  7566.864] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> [  7566.864] (==) intel(0): Depth 24, (--) framebuffer bpp 32
> [  7566.864] (==) intel(0): RGB weight 888
> [  7566.864] (==) intel(0): Default visual is TrueColor
> [  7566.864] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
> [  7566.864] (--) intel(0): Chipset: "Arrandale"
> [  7566.865] (**) intel(0): Relaxed fencing enabled
> [  7566.865] (**) intel(0): Wait on SwapBuffers? enabled
> [  7566.865] (**) intel(0): Triple buffering? enabled
> [  7566.865] (**) intel(0): Framebuffer tiled
> [  7566.865] (**) intel(0): Pixmaps tiled
> [  7566.865] (**) intel(0): 3D buffers tiled
> [  7566.865] (**) intel(0): SwapBuffers wait enabled
> [  7566.865] (==) intel(0): video overlay key set to 0x101fe
> [  7566.865] (II) intel(0): Output LVDS1 using monitor section Monitor0
> [  7566.897] (II) intel(0): Output VGA1 has no monitor section
> [  7566.907] (II) intel(0): Output HDMI1 has no monitor section
> [  7566.913] (II) intel(0): Output DP1 has no monitor section
> [  7566.913] (II) intel(0): EDID for output LVDS1
> [  7566.913] (II) intel(0): Manufacturer: LEN  Model: 4011  Serial#: 0
> [  7566.913] (II) intel(0): Year: 2009  Week: 0
> [  7566.913] (II) intel(0): EDID Version: 1.3
> [  7566.913] (II) intel(0): Digital Display Input
> [  7566.913] (II) intel(0): Max Image Size [cm]: horiz.: 26  vert.: 16
> [  7566.914] (II) intel(0): Gamma: 2.20
> [  7566.914] (II) intel(0): DPMS capabilities: StandBy Suspend Off
> [  7566.914] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
> [  7566.914] (II) intel(0): First detailed timing is preferred mode
> [  7566.914] (II) intel(0): redX: 0.592 redY: 0.351   greenX: 0.334 greenY:
> 0.549
> [  7566.914] (II) intel(0): blueX: 0.154 blueY: 0.130   whiteX: 0.313
> whiteY: 0.329
> [  7566.914] (II) intel(0): Manufacturer's mask: 0
> [  7566.914] (II) intel(0): Supported detailed timing:
> [  7566.914] (II) intel(0): clock: 69.3 MHz   Image Size:  261 x 163 mm
> [  7566.914] (II) intel(0): h_active: 1280  h_sync: 1304  h_sync_end 1336
> h_blank_end 1408 h_border: 0
> [  7566.914] (II) intel(0): v_active: 800  v_sync: 804  v_sync_end 808
> v_blanking: 820 v_border: 0
> [  7566.914] (II) intel(0): Supported detailed timing:
> [  7566.914] (II) intel(0): clock: 57.8 MHz   Image Size:  261 x 163 mm
> [  7566.914] (II) intel(0): h_active: 1280  h_sync: 1304  h_sync_end 1336
> h_blank_end 1408 h_border: 0
> [  7566.914] (II) intel(0): v_active: 800  v_sync: 804  v_sync_end 808
> v_blanking: 820 v_border: 0
> [  7566.914] (II) intel(0): Unknown vendor-specific block f
> [  7566.914] (II) intel(0):  LP121WX3-TLC1
> [  7566.914] (II) intel(0): EDID (in hex):
> [  7566.914] (II) intel(0): 	00ffffffffffff0030ae114000000000
> [  7566.914] (II) intel(0): 	00130103801a1078eaba959759558c27
> [  7566.914] (II) intel(0): 	21505400000001010101010101010101
> [  7566.914] (II) intel(0): 	010101010101121b0080502014301820
> [  7566.914] (II) intel(0): 	440005a31000001f9316008050201430
> [  7566.914] (II) intel(0): 	1820440005a31000001f0000000f0081
> [  7566.914] (II) intel(0): 	0a3c810a3216090030e4f001000000fe
> [  7566.914] (II) intel(0): 	004c503132315758332d544c433100ac
> [  7566.914] (II) intel(0): EDID vendor "LEN", prod id 16401
> [  7566.914] (II) intel(0): Printing DDC gathered Modelines:
> [  7566.914] (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1304 1336
> 1408  800 804 808 820 +hsync +vsync (49.2 kHz)
> [  7566.914] (II) intel(0): Modeline "1280x800"x0.0   57.79  1280 1304 1336
> 1408  800 804 808 820 +hsync +vsync (41.0 kHz)
> [  7566.914] (II) intel(0): Not using default mode "320x240" (doublescan
> mode not supported)
> [  7566.914] (II) intel(0): Not using default mode "400x300" (doublescan
> mode not supported)
> [  7566.914] (II) intel(0): Not using default mode "400x300" (doublescan
> mode not supported)
> [  7566.914] (II) intel(0): Not using default mode "512x384" (doublescan
> mode not supported)
> [  7566.914] (II) intel(0): Not using default mode "640x480" (doublescan
> mode not supported)
> [  7566.914] (II) intel(0): Not using default mode "640x512" (doublescan
> mode not supported)
> [  7566.914] (II) intel(0): Not using default mode "800x600" (doublescan
> mode not supported)
> [  7566.914] (II) intel(0): Not using default mode "896x672" (doublescan
> mode not supported)
> [  7566.914] (II) intel(0): Not using default mode "928x696" (doublescan
> mode not supported)
> [  7566.914] (II) intel(0): Not using default mode "960x720" (doublescan
> mode not supported)
> [  7566.914] (II) intel(0): Not using default mode "700x525" (doublescan
> mode not supported)
> [  7566.914] (II) intel(0): Not using default mode "1024x768" (doublescan
> mode not supported)
> [  7566.914] (II) intel(0): Printing probed modes for output LVDS1
> [  7566.914] (II) intel(0): Modeline "1280x800"x60.0   69.30  1280 1304 1336
> 1408  800 804 808 820 +hsync +vsync (49.2 kHz)
> [  7566.914] (II) intel(0): Modeline "1280x800"x50.1   57.79  1280 1304 1336
> 1408  800 804 808 820 +hsync +vsync (41.0 kHz)
> [  7566.914] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184
> 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
> [  7566.914] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968
> 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
> [  7566.914] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896
> 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
> [  7566.914] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800
> 480 490 492 525 -hsync -vsync (31.5 kHz)
> [  7566.914] (II) intel(0): EDID for output VGA1
> [  7566.924] (II) intel(0): EDID for output HDMI1
> [  7566.930] (II) intel(0): EDID for output DP1
> [  7566.930] (II) intel(0): Output LVDS1 connected
> [  7566.930] (II) intel(0): Output VGA1 disconnected
> [  7566.930] (II) intel(0): Output HDMI1 disconnected
> [  7566.930] (II) intel(0): Output DP1 disconnected
> [  7566.930] (II) intel(0): Using exact sizes for initial modes
> [  7566.930] (II) intel(0): Output LVDS1 using initial mode 1280x800
> [  7566.930] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless
> otherwise stated.
> [  7566.930] (II) intel(0): Kernel page flipping support detected, enabling
> [  7566.930] (**) intel(0): Display dimensions: (260, 160) mm
> [  7566.930] (**) intel(0): DPI set to (125, 127)
> [  7566.930] (II) Loading sub module "fb"
> [  7566.930] (II) LoadModule: "fb"
> [  7566.931] (II) Loading /usr/local/lib/xorg/modules/libfb.so
> [  7566.994] (II) Module fb: vendor="X.Org Foundation"
> [  7566.994] 	compiled for 1.10.6, module version = 1.0.0
> [  7566.994] 	ABI class: X.Org ANSI C Emulation, version 0.4
> [  7566.994] (II) Loading sub module "dri2"
> [  7566.994] (II) LoadModule: "dri2"
> [  7566.995] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so
> [  7566.995] (II) Module dri2: vendor="X.Org Foundation"
> [  7566.995] 	compiled for 1.10.6, module version = 1.2.0
> [  7566.995] 	ABI class: X.Org Server Extension, version 5.0
> [  7566.995] (==) Depth 24 pixmap format is 32 bpp
> [  7566.995] (II) intel(0): [DRI2] Setup complete
> [  7566.995] (II) intel(0): [DRI2]   DRI driver: i965
> [  7566.995] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120,
> tiled
> [  7567.098] (II) UXA(0): Driver registered support for the following
> operations:
> [  7567.098] (II)         solid
> [  7567.098] (II)         copy
> [  7567.098] (II)         composite (RENDER acceleration)
> [  7567.098] (II)         put_image
> [  7567.098] (II)         get_image
> [  7567.098] (==) intel(0): Backing store disabled
> [  7567.098] (==) intel(0): Silken mouse enabled
> [  7567.156] (II) intel(0): Initializing HW Cursor
> [  7567.324] (II) intel(0): RandR 1.2 enabled, ignore the following RandR
> disabled message.
> [  7567.347] (==) intel(0): DPMS enabled
> [  7567.347] (==) intel(0): Intel XvMC decoder enabled
> [  7567.348] (II) intel(0): Set up textured video
> [  7567.348] (II) intel(0): [XvMC] xvmc_vld driver initialized.
> [  7567.348] (II) intel(0): direct rendering: DRI2 Enabled
> [  7567.348] (--) RandR disabled
> [  7567.348] (II) Initializing built-in extension Generic Event Extension
> [  7567.348] (II) Initializing built-in extension SHAPE
> [  7567.348] (II) Initializing built-in extension MIT-SHM
> [  7567.348] (II) Initializing built-in extension XInputExtension
> [  7567.348] (II) Initializing built-in extension XTEST
> [  7567.348] (II) Initializing built-in extension BIG-REQUESTS
> [  7567.348] (II) Initializing built-in extension SYNC
> [  7567.348] (II) Initializing built-in extension XKEYBOARD
> [  7567.348] (II) Initializing built-in extension XC-MISC
> [  7567.348] (II) Initializing built-in extension XINERAMA
> [  7567.348] (II) Initializing built-in extension XFIXES
> [  7567.348] (II) Initializing built-in extension RENDER
> [  7567.348] (II) Initializing built-in extension RANDR
> [  7567.348] (II) Initializing built-in extension COMPOSITE
> [  7567.348] (II) Initializing built-in extension DAMAGE
> [  7567.626] (II) AIGLX: Loaded and initialized
> /usr/local/lib/dri/swrast_dri.so
> [  7567.626] (II) GLX: Initialized DRISWRAST GL provider for screen 0
> [  7567.627] (II) intel(0): Setting screen physical size to 338 x 211
> [  7567.796] [dix] Could not init font path element
> ${prefix}/share/fonts/X11/misc/, removing from list!
> [  7567.796] [dix] Could not init font path element
> ${prefix}/share/fonts/X11/TTF/, removing from list!
> [  7567.796] [dix] Could not init font path element
> ${prefix}/share/fonts/X11/OTF/, removing from list!
> [  7567.796] [dix] Could not init font path element
> ${prefix}/share/fonts/X11/Type1/, removing from list!
> [  7567.796] [dix] Could not init font path element
> ${prefix}/share/fonts/X11/100dpi/, removing from list!
> [  7567.796] [dix] Could not init font path element
> ${prefix}/share/fonts/X11/75dpi/, removing from list!
> [  7568.124] (II) Using input driver 'mouse' for 'Mouse0'
> [  7568.124] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so
> [  7568.124] (**) Option "CorePointer"
> [  7568.124] (**) Mouse0: always reports core events
> [  7568.124] (**) Option "Protocol" "auto"
> [  7568.124] (**) Option "Device" "/dev/sysmouse"
> [  7568.124] (**) Mouse0: Protocol: "auto"
> [  7568.124] (**) Mouse0: always reports core events
> [  7568.124] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
> [  7568.124] (**) Option "ZAxisMapping" "4 5 6 7"
> [  7568.124] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
> [  7568.124] (**) Mouse0: Buttons: 11
> [  7568.124] (II) XINPUT: Adding extended input device "Mouse0" (type:
> MOUSE)
> [  7568.124] (**) Mouse0: (accel) keeping acceleration scheme 1
> [  7568.124] (**) Mouse0: (accel) acceleration profile 0
> [  7568.124] (**) Mouse0: (accel) acceleration factor: 2.000
> [  7568.124] (**) Mouse0: (accel) acceleration threshold: 4
> [  7568.124] (II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0
> [  7568.124] (II) Mouse0: SetupAuto: protocol is SysMouse
> [  7568.124] (II) Using input driver 'kbd' for 'Keyboard0'
> [  7568.124] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so
> [  7568.124] (**) Option "CoreKeyboard"
> [  7568.124] (**) Keyboard0: always reports core events
> [  7568.124] (**) Keyboard0: always reports core events
> [  7568.124] (**) Option "Protocol" "standard"
> [  7568.124] (**) Option "XkbRules" "base"
> [  7568.124] (**) Option "XkbModel" "pc105"
> [  7568.124] (**) Option "XkbLayout" "us"
> [  7568.124] (II) XINPUT: Adding extended input device "Keyboard0" (type:
> KEYBOARD)
> [  7568.218] (EE) config/hal: couldn't initialise context: unknown error
> (null)
> [ 12259.213] (II) 3rd Button detected: disabling emulate3Button
>
> #pciconf -lv
> hostb0 at pci0:255:0:0:	class=0x060000 card=0x219617aa chip=0x2c628086 rev=0x02
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = 'Core Processor QuickPath Architecture Generic Non-core
> Registers'
>      class      = bridge
>      subclass   = HOST-PCI
> hostb1 at pci0:255:0:1:	class=0x060000 card=0x219617aa chip=0x2d018086 rev=0x02
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = 'Core Processor QuickPath Architecture System Address
> Decoder'
>      class      = bridge
>      subclass   = HOST-PCI
> hostb2 at pci0:255:2:0:	class=0x060000 card=0x219617aa chip=0x2d108086 rev=0x02
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = 'Core Processor QPI Link 0'
>      class      = bridge
>      subclass   = HOST-PCI
> hostb3 at pci0:255:2:1:	class=0x060000 card=0x219617aa chip=0x2d118086 rev=0x02
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = 'Core Processor QPI Physical 0'
>      class      = bridge
>      subclass   = HOST-PCI
> hostb4 at pci0:255:2:2:	class=0x060000 card=0x219617aa chip=0x2d128086 rev=0x02
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = 'Core Processor Reserved'
>      class      = bridge
>      subclass   = HOST-PCI
> hostb5 at pci0:255:2:3:	class=0x060000 card=0x219617aa chip=0x2d138086 rev=0x02
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = 'Core Processor Reserved'
>      class      = bridge
>      subclass   = HOST-PCI
> hostb6 at pci0:0:0:0:	class=0x060000 card=0x219317aa chip=0x00448086 rev=0x02
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = 'Core Processor DRAM Controller'
>      class      = bridge
>      subclass   = HOST-PCI
> vgapci0 at pci0:0:2:0:	class=0x030000 card=0x215a17aa chip=0x00468086 rev=0x02
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = 'Core Processor Integrated Graphics Controller'
>      class      = display
>      subclass   = VGA
> none0 at pci0:0:22:0:	class=0x078000 card=0x215f17aa chip=0x3b648086 rev=0x06
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = '5 Series/3400 Series Chipset HECI Controller'
>      class      = simple comms
> em0 at pci0:0:25:0:	class=0x020000 card=0x215317aa chip=0x10ea8086 rev=0x06
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = '82577LM Gigabit Network Connection'
>      class      = network
>      subclass   = ethernet
> ehci0 at pci0:0:26:0:	class=0x0c0320 card=0x216317aa chip=0x3b3c8086 rev=0x06
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = '5 Series/3400 Series Chipset USB2 Enhanced Host
> Controller'
>      class      = serial bus
>      subclass   = USB
> hdac0 at pci0:0:27:0:	class=0x040300 card=0x215e17aa chip=0x3b568086 rev=0x06
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = '5 Series/3400 Series Chipset High Definition Audio'
>      class      = multimedia
>      subclass   = HDA
> pcib2 at pci0:0:28:0:	class=0x060400 card=0x216417aa chip=0x3b428086 rev=0x06
> hdr=0x01
>      vendor     = 'Intel Corporation'
>      device     = '5 Series/3400 Series Chipset PCI Express Root Port 1'
>      class      = bridge
>      subclass   = PCI-PCI
> pcib3 at pci0:0:28:3:	class=0x060400 card=0x216417aa chip=0x3b488086 rev=0x06
> hdr=0x01
>      vendor     = 'Intel Corporation'
>      device     = '5 Series/3400 Series Chipset PCI Express Root Port 4'
>      class      = bridge
>      subclass   = PCI-PCI
> pcib4 at pci0:0:28:4:	class=0x060400 card=0x216417aa chip=0x3b4a8086 rev=0x06
> hdr=0x01
>      vendor     = 'Intel Corporation'
>      device     = '5 Series/3400 Series Chipset PCI Express Root Port 5'
>      class      = bridge
>      subclass   = PCI-PCI
> ehci1 at pci0:0:29:0:	class=0x0c0320 card=0x216317aa chip=0x3b348086 rev=0x06
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = '5 Series/3400 Series Chipset USB2 Enhanced Host
> Controller'
>      class      = serial bus
>      subclass   = USB
> pcib5 at pci0:0:30:0:	class=0x060401 card=0x216517aa chip=0x24488086 rev=0xa6
> hdr=0x01
>      vendor     = 'Intel Corporation'
>      device     = '82801 Mobile PCI Bridge'
>      class      = bridge
>      subclass   = PCI-PCI
> isab0 at pci0:0:31:0:	class=0x060100 card=0x216617aa chip=0x3b078086 rev=0x06
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = 'Mobile 5 Series Chipset LPC Interface Controller'
>      class      = bridge
>      subclass   = PCI-ISA
> ahci0 at pci0:0:31:2:	class=0x010601 card=0x216817aa chip=0x3b2f8086 rev=0x06
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = '5 Series/3400 Series Chipset 6 port SATA AHCI Controller'
>      class      = mass storage
>      subclass   = SATA
> none1 at pci0:0:31:3:	class=0x0c0500 card=0x216717aa chip=0x3b308086 rev=0x06
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = '5 Series/3400 Series Chipset SMBus Controller'
>      class      = serial bus
>      subclass   = SMBus
> none2 at pci0:0:31:6:	class=0x118000 card=0x219017aa chip=0x3b328086 rev=0x06
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = '5 Series/3400 Series Chipset Thermal Subsystem'
>      class      = dasp
> iwn0 at pci0:2:0:0:	class=0x028000 card=0x13158086 chip=0x00848086 rev=0x00
> hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = 'Centrino Wireless-N 1000'
>      class      = network
>
>
> --
> View this message in context: http://freebsd.1045724.n5.nabble.com/Intel-GPU-patch-13-5-for-stable-9-CFT-Xorg-Upgrade-7-5-2-tp5589273p5589273.html
> Sent from the freebsd-x11 mailing list archive at Nabble.com.
> _______________________________________________
> freebsd-x11 at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe at freebsd.org"



More information about the freebsd-x11 mailing list