From jimmiejaz at gmail.com  Sat May  2 20:14:24 2009
From: jimmiejaz at gmail.com (Jimmie James)
Date: Sat May  2 20:14:43 2009
Subject: Repeatable X lockups
Message-ID: <49FCA302.4020606@gmail.com>

When using the xv output driver for vlc or mplayer, X will lockup, crash 
instantly, trashing the screen and forcing a reboot
Image of screen corruption: 
http://img.photobucket.com/albums/v287/jimmiejaz/xcrash.jpg

This just started manifesting in the past week or so.

HW/SW details
All that's printed to Xorg.0.log
(II) intel(0): EDID vendor "NEC", prod id 17450
Memory heap 0x2867e260:
   Offset:0002a000, Size:00100000, F.

Free list:
  FREE Offset:0002a000, Size:00100000, F.
End of memory blocks

pciconf -lv
vgapci0@pci0:0:2:0:     class=0x030000 card=0x25821043 chip=0x25828086 
rev=0x04 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82915G/GV/GL, 82910GL Integrated Graphics Device'
     class      = display
     subclass   = VGA
vgapci1@pci0:0:2:1:     class=0x038000 card=0x25821043 chip=0x27828086 
rev=0x04 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82915G Graphics device: 82915G/GV/910GL Express 
Chipset Family'
     class      = display


display bits from dmesg:
vgapci0: <VGA-compatible display> port 0x6800-0x6807 mem 
0xcfd80000-0xcfdfffff,0xd0000000-0xdfffffff,0xcfe80000-0xcfebffff at 
device 2.0 on pci0
agp0: <Intel 82915G (915G GMCH) SVGA controller> on vgapci0
drm0: <Intel i915G> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
vgapci1: <VGA-compatible display> mem 0xcfe00000-0xcfe7ffff at device 
2.1 on pci0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
drm0: <Intel i915G> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
drm0: [ITHREAD]


dmesg:
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-PRERELEASE #0: Sat Mar 21 22:34:18 EDT 2009
     jimmie@jimmiejaz.org:/usr/obj/usr/src/sys/FORTYTWO
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.02-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0x441d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,xTPR>
   AMD Features=0x100000<NX>
   Logical CPUs per core: 2
real memory  = 1065091072 (1015 MB)
avail memory = 1032073216 (984 MB)
ACPI APIC Table: <A M I  OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 3f700000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x6800-0x6807 mem 
0xcfd80000-0xcfdfffff,0xd0000000-0xdfffffff,0xcfe80000-0xcfebffff at 
device 2.0 on pci0
agp0: <Intel 82915G (915G GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
drm0: <Intel i915G> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
vgapci1: <VGA-compatible display> mem 0xcfe00000-0xcfe7ffff at device 
2.1 on pci0
hdac0: <Intel 82801F High Definition Audio Controller> mem 
0xcfef8000-0xcfefbfff irq 16 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20090316_0130
hdac0: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib4
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 
0x7000-0x701f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 
0x7400-0x741f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 
0x7800-0x781f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 
0x8000-0x801f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 
0xcfeffc00-0xcfefffff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib5
fxp0: <Intel 82562EZ (ICH6)> port 0xa000-0xa03f mem 
0xcfffe000-0xcfffefff irq 20 at device 8.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:11:d8:11:b7:4e
fxp0: [ITHREAD]
rl0: <Accton MPX 5030/5038 10/100BaseTX> port 0xa400-0xa4ff mem 
0xcffff800-0xcffff8ff irq 22 at device 10.0 on pci1
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:e0:29:51:c7:61
rl0: [ITHREAD]
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xa800-0xa87f mem 
0xcffffc00-0xcffffc7f irq 21 at device 11.0 on pci1
miibus2: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus2
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:75:c7:27:da
xl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <Intel ICH6 SATA150 controller> port 
0x9800-0x9807,0x9400-0x9403,0x9000-0x9007,0x8800-0x8803,0x8400-0x840f 
irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ichsmb0: <Intel 82801FB (ICH6) SMBus controller> port 0x400-0x41f irq 19 
at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
ichsmb0: [ITHREAD]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on 
acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xca800-0xcafff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
ukbd0: <Microsoft Natural\M-. Ergonomic Keyboard 4000, class 0/0, rev 
2.00/1.73, addr 2> on uhub0
kbd2 at ukbd0
uhid0: <Microsoft Natural\M-. Ergonomic Keyboard 4000, class 0/0, rev 
2.00/1.73, addr 2> on uhub0
ums0: <B16_b_02 USB-PS/2 Optical Mouse, class 0/0, rev 2.00/98.02, addr 
3> on uhub0
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based 
forwarding enabled, default to accept, logging limited to 5 
packets/entry by default
ad0: 114473MB <WDC WD1200BB-00CAA0 16.06V16> at ata0-master UDMA100
acd0: DVDROM <SAMSUNG DVD-ROM SD-816B/H000> at ata0-slave UDMA33
hdac0: HDA Codec #0: Realtek ALC880
pcm0: <HDA Realtek ALC880 PCM #0 Digital> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC880 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA Realtek ALC880 PCM #2 Analog> at cad 0 nid 1 on hdac0
pcm3: <HDA Realtek ALC880 PCM #3 Analog> at cad 0 nid 1 on hdac0
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s1a
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe0:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata0:0:1:0): CAM Status: SCSI Status Error
(probe0:ata0:0:1:0): SCSI Status: Check Condition
(probe0:ata0:0:1:0): NOT READY asc:3a,0
(probe0:ata0:0:1:0): Medium not present
(probe0:ata0:0:1:0): Unretryable error
cd0 at ata0 bus 0 target 1 lun 0
cd0: <SAMSUNG DVD-ROM SD-816B H000> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
fxp0: link state changed to UP
xl0: link state changed to UP
rl0: link state changed to UP
rl0: link state changed to DOWN
rl0: link state changed to UP
drm0: [ITHREAD]

Xorg.0.log


X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.2-PRERELEASE i386
Current Operating System: FreeBSD jimmiejaz.org 7.2-PRERELEASE FreeBSD 
7.2-PRERELEASE #0: Sat Mar 21 22:34:18 EDT 2009 
jimmie@jimmiejaz.org:/usr/obj/usr/src/sys/FORTYTWO i386
Build Date: 06 April 2009  01:21:41AM

         Before reporting problems, check http://wiki.x.org
         to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May  2 14:28:43 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "monitor0"
(**) |   |-->Device "i810"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AIGLX" "true"
(**) Option "AllowEmptyInput" "OFF"
(**) Option "AutoAddDevices" "OFF"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
         /usr/local/lib/X11/fonts/local/,
         /usr/local/lib/X11/fonts/misc/,
         /usr/local/lib/X11/fonts/75dpi/:unscaled,
         /usr/local/lib/X11/fonts/100dpi/:unscaled,
         /usr/local/lib/X11/fonts/Type1/,
         /usr/local/lib/X11/fonts/75dpi/,
         /usr/local/lib/X11/fonts/100dpi/,
         /usr/local/lib/X11/fonts/TTF/,
         /usr/local/lib/X11/fonts/artwiz-fonts/,
         /usr/local/lib/X11/fonts/webfonts/,
         /usr/local/lib/X11/fonts/URW/,
         /usr/local/lib/X11/fonts/jmk,
         /usr/local/lib/X11/fonts/terminus-font,
         /usr/local/lib/X11/fonts/artwiz-fonts,
         /usr/local/lib/X11/fonts/misc/,
         /usr/local/lib/X11/fonts/TTF/,
         /usr/local/lib/X11/fonts/OTF,
         /usr/local/lib/X11/fonts/Type1/,
         /usr/local/lib/X11/fonts/100dpi/,
         /usr/local/lib/X11/fonts/75dpi/,
         built-ins
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(II) Loader magic: 0x6a0
(II) Module ABI versions:
         X.Org ANSI C Emulation: 0.4
         X.Org Video Driver: 5.0
         X.Org XInput driver : 4.0
         X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(--) PCI:*(0@0:2:0) Intel Corporation 82915G/GV/910GL Integrated 
Graphics Controller rev 4, Mem @ 0xcfd80000/524288, 
0xd0000000/268435456, 0xcfe80000/262144, I/O @ 0x00006800/8, BIOS @ 
0x????????/65536
(--) PCI: (0@0:2:1) Intel Corporation 82915G Integrated Graphics 
Controller rev 4, Mem @ 0xcfe00000/524288
(II) System resource ranges:
         [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
         [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
         [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
         [3] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
         [4] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also 
specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also 
specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.0.0
         ABI class: X.Org Server Extension, version 2.0
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.0.0
         ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "vbe"
(II) Loading /usr/local/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.1.0
         ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.0.0
         ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.0.0
         Module class: X.Org Server Extension
         ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.0.0
         Module class: X.Org Server Extension
         ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.13.0
         Module class: X.Org Server Extension
         ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.0.0
         ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 2.6.3
         Module class: X.Org Video Driver
         ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.4.0
         Module class: X.Org XInput Driver
         ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.3.2
         Module class: X.Org XInput Driver
         ABI class: X.Org XInput driver, version 4.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
         i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
         E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
         965GM, 965GME/GLE, G33, Q35, Q33,
         Mobile Intel<C2><AE> GM45 Express Chipset,
         Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
         [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
         [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
         [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
         [3] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
         [4] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
(II) resource ranges after probing:
         [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
         [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
         [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
         [3] 0   0       0x000a0000 - 0x000affff (0x10000) MS[B]
         [4] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[B]
         [5] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[B]
         [6] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
         [7] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
         [8] 0   0       0x000003b0 - 0x000003bb (0xc) IS[B]
         [9] 0   0       0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/local/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 0.1.0
         ABI class: X.Org Video Driver, version 5.0
(**) intel(0): Depth 16, (--) framebuffer bpp 16
(==) intel(0): RGB weight 565
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 915G
(--) intel(0): Chipset: "915G"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xCFD80000
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section monitor0
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered 
at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "NEC", prod id 17450
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1600x1200"x0.0  175.50  1600 1664 1856 2160 
1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 
605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 
603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 
484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 
492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 
486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 
492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   35.50  720 738 846 900  400 421 
423 449 -hsync -vsync (39.4 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 
414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688 
1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 
769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 
771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 
771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "1024x768"x0.0   44.90  1024 1032 1208 1264  768 
768 772 817 interlace +hsync +vsync (35.5 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 
628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 
604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 
643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 
865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 
484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 
604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 
769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 
961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688 
1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1600x1200"x0.0  175.50  1600 1664 1856 2160 
1200 1201 1204 1250 +hsync +vsync (81.2 kHz)
(II) intel(0): EDID vendor "NEC", prod id 17450
(II) intel(0): Output VGA connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA using initial mode 1600x1200
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x83e
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (320, 240) mm
(**) intel(0): DPI set to (127, 169)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 1.0.0
         ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/local/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
         compiled for 1.6.0, module version = 2.4.0
         ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
         [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
         [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
         [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
         [3] 0   0       0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
         [4] 0   0       0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
         [5] 0   0       0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
         [6] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
         [7] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
         [8] 0   0       0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
         [9] 0   0       0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 241152 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 964608 kB available
(WW) intel(0): DRI2 requires UXA
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xcfd80000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] mapped front buffer at 0xd0800000, handle = 0xd0800000
(II) intel(0): [drm] mapped back buffer at 0xd2800000, handle = 0xd2800000
(II) intel(0): [drm] mapped depth buffer at 0xd3000000, handle = 0xd3000000
(II) intel(0): [drm] mapped classic textures at 0xd3800000, handle = 
0xd3800000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 
0x0000
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) EXA(0): Offscreen pixmap area of 19660800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00800000 (pgoffset 2048)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02800000 (pgoffset 10240)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x03000000 (pgoffset 12288)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x03800000 (pgoffset 14336)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB, 
0x000000003f820000 physical
)
(II) intel(0): 0x0002a000-0x00129fff: fake bufmgr (1024 kB)
(II) intel(0): 0x0012a000-0x0012afff: overlay registers (4 kB, 
0x000000003f92a000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB)
(II) intel(0): 0x01000000-0x022bffff: exa offscreen (19200 kB)
(II) intel(0): 0x02800000-0x02ffffff: back buffer (8192 kB)
(II) intel(0): 0x03000000-0x037fffff: depth buffer (8192 kB)
(II) intel(0): 0x03800000-0x057fffff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is off
(II) intel(0):   Display plane B is now disabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled 
message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 306 x 230
(**) Option "Protocol" "AUTO"
(**) Mouse1: Device: "/dev/sysmouse"
(**) Mouse1: Protocol: "AUTO"
(**) Option "CorePointer"
(**) Mouse1: always reports core events
(**) Option "Device" "/dev/sysmouse"
(**) Option "Buttons" "10"
(**) Option "Emulate3Buttons" "no"
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Option "ButtonMapping" "1 2 3 6 7 8 9 10 4 5"
(**) Mouse1: Buttons: 10
(**) Mouse1: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(**) Mouse1: (accel) keeping acceleration scheme 1
(**) Mouse1: (accel) filter chain progression: 2.00
(**) Mouse1: (accel) filter stage 0: 20.00 ms
(**) Mouse1: (accel) set acceleration profile 0
(II) Mouse1: SetupAuto: hw.iftype is 4, hw.model is 0
(II) Mouse1: SetupAuto: protocol is SysMouse
(**) Option "CoreKeyboard"
(**) Keyboard1: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) config/hal: Adding input device USB-PS/2 Optical Mouse
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Natural? Ergonomic Keyboard 4000
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device AT Keyboard
(EE) config/hal: NewInputDeviceRequest failed (8)
exaCopyDirty: Pending damage region empty!


xorg.conf:
Section "ServerLayout"
         Identifier     "Simple Layout"
         Screen         "Screen 1" 0 0
         InputDevice    "Mouse1" "CorePointer"
         InputDevice    "Keyboard1" "CoreKeyboard"
         Option          "AllowEmptyInput" "OFF"
         Option          "AutoAddDevices" "OFF"
EndSection

Section "Files"
#       RgbPath      "/usr/local/share/X11/rgb" #*REMOVED* UPDATING 
20090123:
         ModulePath   "/usr/local/lib/xorg/modules"
         FontPath     "/usr/local/lib/X11/fonts/local/"
         FontPath     "/usr/local/lib/X11/fonts/misc/"
         FontPath     "/usr/local/lib/X11/fonts/75dpi/:unscaled"
         FontPath     "/usr/local/lib/X11/fonts/100dpi/:unscaled"
         FontPath     "/usr/local/lib/X11/fonts/Type1/"
         FontPath     "/usr/local/lib/X11/fonts/75dpi/"
         FontPath     "/usr/local/lib/X11/fonts/100dpi/"
         FontPath     "/usr/local/lib/X11/fonts/TTF/"
         FontPath     "/usr/local/lib/X11/fonts/artwiz-fonts/"
         FontPath     "/usr/local/lib/X11/fonts/webfonts/"
         FontPath     "/usr/local/lib/X11/fonts/URW/"
         FontPath     "/usr/local/lib/X11/fonts/jmk"
         FontPath     "/usr/local/lib/X11/fonts/terminus-font"
         FontPath     "/usr/local/lib/X11/fonts/artwiz-fonts"
EndSection

Section "ServerFlags"
Option "AIGLX" "true"
EndSection

Section "Module"
         Load  "GLcore"
         Load  "glx"
         Load  "dri"
         Load  "drm"
         Load  "vbe"
        Load  "int10"
EndSection

Section "InputDevice"
         Identifier  "Keyboard1"
         Driver      "kbd"
         Option      "pc101"
EndSection

Section "InputDevice"
         Identifier  "Mouse1"
         Driver      "mouse"
         Option      "Protocol" "AUTO"
         Option      "Device" "/dev/sysmouse"
         Option      "Buttons" "10"
         Option      "ZAxisMapping" "4 5"
         Option      "ButtonMapping" "1 2 3 6 7 8 9 10 4 5"
         Option      "Emulate3Buttons" "no"
EndSection

Section "Monitor"
         Identifier   "monitor0"
EndSection

Section "Device"

         Identifier  "i810"
         Driver      "intel"
         VendorName  "Intel"
         BoardName   "82915G/GV/910GL Express Chipset Family Graphics 
Controller"
         BusID       "PCI:0:2:0"

EndSection

Section "Screen"
         Identifier "Screen 1"
         Device     "i810"
         Monitor    "monitor0"
         DefaultDepth     16
         Subsection "Display"
                Modes     "1400x1050" "1280x1024" "1024x768"
         Depth 16
         EndSubSection
EndSection

Section "DRI"
         Mode         0666
EndSection

xrandr:

Screen 0: minimum 320 x 200, current 1600 x 1200, maximum 1600 x 1600
VGA connected 1600x1200+0+0 (normal left inverted right x axis y axis) 
306mm x 230mm
    1600x1200      65.0*
    1280x1024      75.0
    1280x960       60.0
    1152x864       75.0
    1024x768       85.0     75.0     70.1     60.0     43.5
    832x624        74.6
    800x600        85.1     72.2     75.0     60.3     56.2
    640x480        85.0     75.0     72.8     66.7     59.9
    720x400        87.8     70.1



-- 
Over the years I've come to regard you as people I've met.

From linimon at FreeBSD.org  Sat May  2 21:51:58 2009
From: linimon at FreeBSD.org (linimon@FreeBSD.org)
Date: Sat May  2 21:52:05 2009
Subject: ports/134132: x11-servers/xorg-server: Intel i845 - xorg.conf
	with UXA - error: [drm:pid1104:i915_irq_emit] *ERROR*
	i915_irq_emit called without lock held
Message-ID: <200905022151.n42Lpwhi048340@freefall.freebsd.org>

Old Synopsis: [video] Intel i845 - xorg.conf with UXA - error: [drm:pid1104:i915_irq_emit] *ERROR* i915_irq_emit called without lock held
New Synopsis: x11-servers/xorg-server: Intel i845 - xorg.conf with UXA - error: [drm:pid1104:i915_irq_emit] *ERROR* i915_irq_emit called without lock held

Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-x11
Responsible-Changed-By: linimon
Responsible-Changed-When: Sat May 2 21:50:46 UTC 2009
Responsible-Changed-Why: 
Over to maintainer(s).

http://www.freebsd.org/cgi/query-pr.cgi?pr=134132
From ghostp at dzsy.org  Sun May  3 12:56:34 2009
From: ghostp at dzsy.org (=?ISO-8859-1?Q?Sz=E9kv=F6lgyi_P=E9ter?=)
Date: Sun May  3 12:57:11 2009
Subject: XOrg freeze with intel driver
Message-ID: <49FD8F2A.6090400@dzsy.org>

Hi,

I have a Acer Extensa 5620 laptop with FreeBSD az XOrg. Few days ago i 
change my
system from 7-STABLE to 7.2-RELEASE and upgraded all ports.

My video controller is:
vgapci0@pci0:0:2:0:     class=0x030000 card=0x011f1025 chip=0x2a028086 
rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile 965 Express Integrated Graphics Controller'
    class      = display
    subclass   = VGA
vgapci1@pci0:0:2:1:     class=0x038000 card=0x011f1025 chip=0x2a038086 
rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile 965 Express Integrated Graphics Controller'
    class      = display

After upgrade the intel driver is:
xf86-video-intel-2.6.3

If i want to play HD 720p ( mkv ) file with mplayer X freeze and i 
didn't access the console.
I tested lots of xorg.conf change or without xorg.conf. Any time a see 
in Xorg.log:

exaCopyDirty: Pending damage region empty!
Memory heap 0x28666340:
Offset:0002a000, Size:00001000, ..
Offset:0002b000, Size:00001000, ..
Offset:0002c000, Size:000fe000, F.

Free list:
FREE Offset:0002c000, Size:000fe000, F.
End of memory blocks

After i downgrade xf86-video-intel port to xf86-video-intel-2.5.1 the 
display works fine and
i can play any 720p mkv file with mplayer.

Best regards,
Peter

From edwin at FreeBSD.org  Sun May  3 20:10:15 2009
From: edwin at FreeBSD.org (edwin@FreeBSD.org)
Date: Sun May  3 20:10:26 2009
Subject: ports/134194: graphics/dri fail on 7.2-RELEASE amd64
Message-ID: <200905032010.n43KAFK9079877@freefall.freebsd.org>

Synopsis: graphics/dri fail on 7.2-RELEASE amd64

Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-x11
Responsible-Changed-By: edwin
Responsible-Changed-When: Sun May 3 20:10:14 UTC 2009
Responsible-Changed-Why: 
Over to maintainer (via the GNATS Auto Assign Tool)

http://www.freebsd.org/cgi/query-pr.cgi?pr=134194
From markocpc at gmail.com  Mon May  4 07:10:02 2009
From: markocpc at gmail.com (Lagrange Marc)
Date: Mon May  4 07:10:09 2009
Subject: ports/134194: graphics/dri fail on 7.2-RELEASE amd64
Message-ID: <200905040710.n447A2f3074070@freefall.freebsd.org>

The following reply was made to PR ports/134194; it has been noted by GNATS.

From: Lagrange Marc <markocpc@gmail.com>
To: bug-followup@FreeBSD.org, markocpc@gmail.com
Cc:  
Subject: Re: ports/134194: graphics/dri fail on 7.2-RELEASE amd64
Date: Mon, 4 May 2009 09:03:16 +0200

 mmmm, it's finally a problem with the configure script that doesn't
 verifying if the time is good ...
 
 and after verifying/setting the clock to the right date.. it work...
From bugmaster at FreeBSD.org  Mon May  4 11:08:12 2009
From: bugmaster at FreeBSD.org (FreeBSD bugmaster)
Date: Mon May  4 11:10:22 2009
Subject: Current problem reports assigned to freebsd-x11@FreeBSD.org
Message-ID: <200905041108.n44B8BYW098965@freefall.freebsd.org>

Note: to view an individual PR, use:
  http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.


S Tracker      Resp.      Description
--------------------------------------------------------------------------------
o ports/134194 x11        graphics/dri fail on 7.2-RELEASE amd64
o ports/134132 x11        x11-servers/xorg-server: Intel i845 - xorg.conf with U
o ports/134082 x11        x11/xdriinfo: xdriinfo-1.0.2 build fail
o ports/134008 x11        [patch] x11-drivers/xf86-video-radeonhd: add glproto a
o ports/133946 x11        x11-servers/xorg-server [patch] X crashes in xinerama 
o ports/133837 x11        [patch] graphics/libdrm: update to 2.4.9
o ports/133609 x11        x11/xorg crashes with vlc, intel video driver
o ports/133482 x11        x11/libXext "Generic Event Extension not available" er
o ports/133465 x11        x11/xorg: X crashes with mplayer -vo xv with xf86-vide
o ports/133419 x11        Unable to build x11-drivers/xf86-video-nsc
o ports/133175 x11        [patch] x11/pixman: enable SSE2 support autodetection
o ports/133025 x11        [patch] graphics/libGL: mark Mesa ports as MAKE_JOBS_S
o ports/132621 x11        x11/xorg tries to install event when deselected
o ports/132403 x11        x11/xorg with Radeon X600 (R370): cannot re-initialize
o ports/132100 x11        x11/xorg: Xorg server forgets pointer map after xlock
o ports/132041 x11        x11/xorg: Broken Intel video driver
o ports/131930 x11        [PATCH] x11-servers/xorg-server coredumps on exit
o ports/131726 x11        x11-servers/xorg-server: xorg server messes with my eh
o ports/131696 x11        x11-servers/xorg-server: hald core dumps make X11 unus
o ports/131644 x11        x11-servers/xorg-server: Xinerama mouse event (focus f
f ports/131124 x11        x11/xorg - New xorg 7.4 hangs until mouse is moved whe
o ports/131016 x11        x11/xorg - xorg-7.4 renders system unusable!
f ports/126812 x11        x11-drivers/xf86-video-ati - System freeze when exitin
o ports/125883 x11        x11-fonts/xorg-fonts-cyrillic is installed, but fonts 
f ports/123137 x11        x11/libX11: missing ru_RU.UTF-8 locale
o ports/122830 x11        x11/xorg: Error in I830WaitLpRing()
f ports/119037 x11        x11: Can't type _ (Underscore) under X (gnome)
f ports/118645 x11        Xorg need realtime priority for mouse work nice
s ports/117907 x11        x11-servers/mga_hal broken on 7.0-BETA (GLIBC error)
f ports/117766 x11        x11-servers/xorg-server (7.3) crashes under heavy load
f ports/117195 x11        ix11/Xorg 7.3 dumps core at exit (sig 11)
o ports/116443 x11        x11-drivers/xf86-input-keyboard patch for USB jp106 ke

32 problems total.

From korvus at comcast.net  Mon May  4 17:56:20 2009
From: korvus at comcast.net (Steve Polyack)
Date: Mon May  4 17:56:26 2009
Subject: Radeon 9250 DRM in 7.2-RELEASE
Message-ID: <49FF28BC.5080304@comcast.net>

I upgraded my workstation (via source) to 7.2-RELEASE from 7.1-RELEASE 
about a day ago.  After the upgrade procedure, I'm having no luck with 
using DRM in X11.  It worked fine before and gave reasonable 
performance.  Now when I start up X with DRI enabled, both of my screens 
display garbage.  The mouse pointer is also not visible.

I'm using a PCI Radeon 9250.  I can get more details if necessary.  I 
can also try to revert the kernel DRM module code to 7.1.

 From dmesg:
drm2: <ATI Radeon RV280 9250> on vgapci2
vgapci2: child drm2 requested pci_enable_busmaster
info: [drm] Initialized radeon 1.29.0 20080528
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R200 Microcode
info: [drm] writeback test succeeded in 2 usecs
drm2: [ITHREAD]

Any ideas or suggestions would be appreciated.  Thanks.

From rnoland at FreeBSD.org  Mon May  4 18:13:58 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Mon May  4 18:14:04 2009
Subject: Radeon 9250 DRM in 7.2-RELEASE
In-Reply-To: <49FF28BC.5080304@comcast.net>
References: <49FF28BC.5080304@comcast.net>
Message-ID: <1241460816.1788.22.camel@balrog.2hip.net>

On Mon, 2009-05-04 at 13:41 -0400, Steve Polyack wrote:
> I upgraded my workstation (via source) to 7.2-RELEASE from 7.1-RELEASE 
> about a day ago.  After the upgrade procedure, I'm having no luck with 
> using DRM in X11.  It worked fine before and gave reasonable 
> performance.  Now when I start up X with DRI enabled, both of my screens 
> display garbage.  The mouse pointer is also not visible.
> 
> I'm using a PCI Radeon 9250.  I can get more details if necessary.  I 
> can also try to revert the kernel DRM module code to 7.1.
> 
>  From dmesg:
> drm2: <ATI Radeon RV280 9250> on vgapci2

Why is this drm2?  Is this a multicard setup?  Multicard doesn't work
right now.  If you aren't using more than one card, can you disable
whatever else drm is attaching to?

robert.

> vgapci2: child drm2 requested pci_enable_busmaster
> info: [drm] Initialized radeon 1.29.0 20080528
> info: [drm] Setting GART location based on new memory map
> info: [drm] Loading R200 Microcode
> info: [drm] writeback test succeeded in 2 usecs
> drm2: [ITHREAD]
> 
> Any ideas or suggestions would be appreciated.  Thanks.
> 
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090504/0fdde433/attachment.pgp
From korvus at comcast.net  Mon May  4 18:43:19 2009
From: korvus at comcast.net (Steve Polyack)
Date: Mon May  4 18:43:25 2009
Subject: Radeon 9250 DRM in 7.2-RELEASE
In-Reply-To: <57B64585162157F0FE51E05F@utd65257.utdallas.edu>
References: <49FF28BC.5080304@comcast.net>
	<57B64585162157F0FE51E05F@utd65257.utdallas.edu>
Message-ID: <49FF3744.1000908@comcast.net>

Paul Schmehl wrote:
>
> Read /usr/portsUPDATING wrt xorg.  There were major changes in the 
> config file and peripheral detection between 7.1 and 7.2
>
> You need to make sure that both dbus and hald are running.  Remove the 
> mouse and keyboard sections from your xorg.conf file.  They are no 
> longer needed. Make sure to remove any line that references RgbPath.
>
> This may help to get the mouse working (ignore the DontZap line):
>
> Section "ServerFlags"
>        Option "DontZap" "No"
>        Option "AllowEmptyInput" "No"
> EndSection
>
> This should get DRI working:
>
> Section "DRI"
>        Group 0
>        Mode  0660
> EndSection
>
I tackled the above when I upgraded Xorg to 7.4 months ago, 
independently of any FreeBSD release updates.

From pauls at utdallas.edu  Mon May  4 18:45:48 2009
From: pauls at utdallas.edu (Paul Schmehl)
Date: Mon May  4 18:45:57 2009
Subject: Radeon 9250 DRM in 7.2-RELEASE
In-Reply-To: <49FF28BC.5080304@comcast.net>
References: <49FF28BC.5080304@comcast.net>
Message-ID: <57B64585162157F0FE51E05F@utd65257.utdallas.edu>

--On Monday, May 04, 2009 12:41:16 -0500 Steve Polyack <korvus@comcast.net> 
wrote:

>
> I upgraded my workstation (via source) to 7.2-RELEASE from 7.1-RELEASE
> about a day ago.  After the upgrade procedure, I'm having no luck with
> using DRM in X11.  It worked fine before and gave reasonable
> performance.  Now when I start up X with DRI enabled, both of my screens
> display garbage.  The mouse pointer is also not visible.
>
> I'm using a PCI Radeon 9250.  I can get more details if necessary.  I
> can also try to revert the kernel DRM module code to 7.1.
>
>  From dmesg:
> drm2: <ATI Radeon RV280 9250> on vgapci2
> vgapci2: child drm2 requested pci_enable_busmaster
> info: [drm] Initialized radeon 1.29.0 20080528
> info: [drm] Setting GART location based on new memory map
> info: [drm] Loading R200 Microcode
> info: [drm] writeback test succeeded in 2 usecs
> drm2: [ITHREAD]
>
> Any ideas or suggestions would be appreciated.  Thanks.
>

Read /usr/portsUPDATING wrt xorg.  There were major changes in the config file 
and peripheral detection between 7.1 and 7.2

You need to make sure that both dbus and hald are running.  Remove the mouse 
and keyboard sections from your xorg.conf file.  They are no longer needed. 
Make sure to remove any line that references RgbPath.

This may help to get the mouse working (ignore the DontZap line):

Section "ServerFlags"
        Option "DontZap" "No"
        Option "AllowEmptyInput" "No"
EndSection

This should get DRI working:

Section "DRI"
        Group 0
        Mode  0660
EndSection

-- 
Paul Schmehl (pauls@utdallas.edu)
Senior Information Security Analyst
The University of Texas at Dallas
http://www.utdallas.edu/ir/security/
From korvus at comcast.net  Mon May  4 18:48:34 2009
From: korvus at comcast.net (Steve Polyack)
Date: Mon May  4 18:48:40 2009
Subject: Radeon 9250 DRM in 7.2-RELEASE
In-Reply-To: <1241460816.1788.22.camel@balrog.2hip.net>
References: <49FF28BC.5080304@comcast.net>
	<1241460816.1788.22.camel@balrog.2hip.net>
Message-ID: <49FF387F.1080203@comcast.net>

Robert Noland wrote:
>
> Why is this drm2?  Is this a multicard setup?  Multicard doesn't work
> right now.  If you aren't using more than one card, can you disable
> whatever else drm is attaching to?
>
> robert.
>
>   

This is something funny I had to deal with initially.  There is *no* 
drm0 or drm1 being probed.  Consequently, there is only one entry in 
/dev/dri/, card2.  As a result, Xorg doesn't even recognize card2 as a 
source for DRM (probably due to what you said).  In the past, I have 
symlinked /dev/dri/card2 to /dev/dri/card0 and Xorg would work 
correctly, utilizing DRM.

I have an onboard Intel VGA device, but as far as I know it is 
disabled.  I can double check, but as I've noted things have worked fine 
with the above tweak until upgrading to 7.2-RELEASE.

Thanks,

From rnoland at FreeBSD.org  Mon May  4 19:07:53 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Mon May  4 19:08:06 2009
Subject: Radeon 9250 DRM in 7.2-RELEASE
In-Reply-To: <49FF387F.1080203@comcast.net>
References: <49FF28BC.5080304@comcast.net>
	<1241460816.1788.22.camel@balrog.2hip.net>
	<49FF387F.1080203@comcast.net>
Message-ID: <1241464053.1788.32.camel@balrog.2hip.net>

On Mon, 2009-05-04 at 14:48 -0400, Steve Polyack wrote:
> Robert Noland wrote:
> >
> > Why is this drm2?  Is this a multicard setup?  Multicard doesn't work
> > right now.  If you aren't using more than one card, can you disable
> > whatever else drm is attaching to?
> >
> > robert.
> >
> >   
> 
> This is something funny I had to deal with initially.  There is *no* 
> drm0 or drm1 being probed.  Consequently, there is only one entry in 
> /dev/dri/, card2.  As a result, Xorg doesn't even recognize card2 as a 
> source for DRM (probably due to what you said).  In the past, I have 
> symlinked /dev/dri/card2 to /dev/dri/card0 and Xorg would work 
> correctly, utilizing DRM.
> 
> I have an onboard Intel VGA device, but as far as I know it is 
> disabled.  I can double check, but as I've noted things have worked fine 
> with the above tweak until upgrading to 7.2-RELEASE.

Can you send me a "pciconf -lvb"

robert.

> Thanks,
> 
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090504/bed54fd1/attachment.pgp
From korvus at comcast.net  Mon May  4 19:56:09 2009
From: korvus at comcast.net (Steve Polyack)
Date: Mon May  4 19:56:16 2009
Subject: Radeon 9250 DRM in 7.2-RELEASE
In-Reply-To: <1241464053.1788.32.camel@balrog.2hip.net>
References: <49FF28BC.5080304@comcast.net>	
	<1241460816.1788.22.camel@balrog.2hip.net>
	<49FF387F.1080203@comcast.net>
	<1241464053.1788.32.camel@balrog.2hip.net>
Message-ID: <49FF4857.4070904@comcast.net>

Robert Noland wrote:
> On Mon, 2009-05-04 at 14:48 -0400, Steve Polyack wrote:
>   
>> This is something funny I had to deal with initially.  There is *no* 
>> drm0 or drm1 being probed.  Consequently, there is only one entry in 
>> /dev/dri/, card2.  As a result, Xorg doesn't even recognize card2 as a 
>> source for DRM (probably due to what you said).  In the past, I have 
>> symlinked /dev/dri/card2 to /dev/dri/card0 and Xorg would work 
>> correctly, utilizing DRM.
>>
>> I have an onboard Intel VGA device, but as far as I know it is 
>> disabled.  I can double check, but as I've noted things have worked fine 
>> with the above tweak until upgrading to 7.2-RELEASE.
>>     
>
> Can you send me a "pciconf -lvb"
>
> robert.
>
>   

$ pciconf -lvb
hostb0@pci0:0:0:0:    class=0x060000 card=0x01ad1028 chip=0x27708086 
rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82945G/GZ/P/PL Host Bridge/DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
pcib1@pci0:0:1:0:    class=0x060400 card=0x00008086 chip=0x27718086 
rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82945G/GZ/P/PL Host to PCI Express Bridge'
    class      = bridge
    subclass   = PCI-PCI
vgapci0@pci0:0:2:0:    class=0x038000 card=0x01ad1028 chip=0x27728086 
rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82945G Integrated Graphics Controller'
    class      = display
    bar   [10] = type Memory, range 32, base 0xfeb00000, size 524288, 
enabled
    bar   [14] = type I/O Port, range 32, base 0xe898, size  8, enabled
    bar   [18] = type Prefetchable Memory, range 32, base 0xd0000000, 
size 268435456, enabled
    bar   [1c] = type Memory, range 32, base 0xfeac0000, size 262144, 
enabled
vgapci1@pci0:0:2:1:    class=0x038000 card=0x01ad1028 chip=0x27768086 
rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82945G Integrated Graphics Controller'
    class      = display
    bar   [10] = type Memory, range 32, base 0xfeb80000, size 524288, 
enabled
pcib2@pci0:0:28:0:    class=0x060400 card=0x00000000 chip=0x27d08086 
rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) PCIe Root Port'
    class      = bridge
    subclass   = PCI-PCI
pcib3@pci0:0:28:1:    class=0x060400 card=0x00000000 chip=0x27d28086 
rev=0x01 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) PCIe Root Port'
    class      = bridge
    subclass   = PCI-PCI
uhci0@pci0:0:29:0:    class=0x0c0300 card=0x01ad1028 chip=0x27c88086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xff80, size 32, enabled
uhci1@pci0:0:29:1:    class=0x0c0300 card=0x01ad1028 chip=0x27c98086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xff60, size 32, enabled
uhci2@pci0:0:29:2:    class=0x0c0300 card=0x01ad1028 chip=0x27ca8086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xff40, size 32, enabled
uhci3@pci0:0:29:3:    class=0x0c0300 card=0x01ad1028 chip=0x27cb8086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB Universal Host Controller'
    class      = serial bus
    subclass   = USB
    bar   [20] = type I/O Port, range 32, base 0xff20, size 32, enabled
ehci0@pci0:0:29:7:    class=0x0c0320 card=0x01ad1028 chip=0x27cc8086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
    class      = serial bus
    subclass   = USB
    bar   [10] = type Memory, range 32, base 0xffa80800, size 1024, enabled
pcib4@pci0:0:30:0:    class=0x060401 card=0x00000000 chip=0x244e8086 
rev=0xe1 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Family (ICH2/3/4/4/5/5/6/7/8/9,63xxESB) Hub 
Interface to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
pcm0@pci0:0:30:2:    class=0x040100 card=0x01ad1028 chip=0x27de8086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801GB I/O Controller Hub AC'97 Audio'
    class      = multimedia
    subclass   = audio
    bar   [10] = type I/O Port, range 32, base 0xec00, size 256, enabled
    bar   [14] = type I/O Port, range 32, base 0xe8c0, size 64, enabled
    bar   [18] = type Memory, range 32, base 0xfeabfa00, size 512, enabled
    bar   [1c] = type Memory, range 32, base 0xfeabf900, size 256, enabled
isab0@pci0:0:31:0:    class=0x060100 card=0x00000000 chip=0x27b88086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '945GL Intel 82801GB/GR (ICH7 Family) LPC Interface 
Controller - 27B8'
    class      = bridge
    subclass   = PCI-ISA
atapci0@pci0:0:31:1:    class=0x01018a card=0x01ad1028 chip=0x27df8086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) Ultra ATA Storage Controller'
    class      = mass storage
    subclass   = ATA
    bar   [10] = type I/O Port, range 32, base 0x1f0, size  8, enabled
    bar   [14] = type I/O Port, range 32, base 0x3f4, size  1, enabled
    bar   [18] = type I/O Port, range 32, base 0x170, size  8, enabled
    bar   [1c] = type I/O Port, range 32, base 0x374, size  1, enabled
    bar   [20] = type I/O Port, range 32, base 0xffa0, size 16, enabled
atapci1@pci0:0:31:2:    class=0x01018f card=0x01ad1028 chip=0x27c08086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller'
    class      = mass storage
    subclass   = ATA
    bar   [10] = type I/O Port, range 32, base 0xfe00, size  8, enabled
    bar   [14] = type I/O Port, range 32, base 0xfe10, size  4, enabled
    bar   [18] = type I/O Port, range 32, base 0xfe20, size  8, enabled
    bar   [1c] = type I/O Port, range 32, base 0xfe30, size  4, enabled
    bar   [20] = type I/O Port, range 32, base 0xfea0, size 16, enabled
none0@pci0:0:31:3:    class=0x0c0500 card=0x01ad1028 chip=0x27da8086 
rev=0x01 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801G (ICH7 Family) SMBus Controller'
    class      = serial bus
    subclass   = SMBus
    bar   [20] = type I/O Port, range 32, base 0xe8a0, size 32, enabled
bge0@pci0:2:0:0:    class=0x020000 card=0x01ad1028 chip=0x167714e4 
rev=0x01 hdr=0x00
    vendor     = 'Broadcom Corporation'
    device     = 'BCM5750A1 NetXtreme Gigabit Ethernet PCI Express'
    class      = network
    subclass   = ethernet
    bar   [10] = type Memory, range 64, base 0xfe8f0000, size 65536, enabled
vgapci2@pci0:4:0:0:    class=0x030000 card=0x0250174b chip=0x59601002 
rev=0x01 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'RV280 Radeon 9200 Pro'
    class      = display
    subclass   = VGA
    bar   [10] = type Prefetchable Memory, range 32, base 0xe8000000, 
size 134217728, enabled
    bar   [14] = type I/O Port, range 32, base 0xdc00, size 256, enabled
    bar   [18] = type Memory, range 32, base 0xfe5e0000, size 65536, enabled
vgapci3@pci0:4:0:1:    class=0x038000 card=0x0251174b chip=0x59401002 
rev=0x01 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'RV280 Radeon 9200 Pro - Secondary'
    class      = display
    bar   [10] = type Prefetchable Memory, range 32, base 0xe0000000, 
size 134217728, enabled
    bar   [14] = type Memory, range 32, base 0xfe5f0000, size 65536, enabled

From rnoland at FreeBSD.org  Mon May  4 20:10:48 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Mon May  4 20:11:00 2009
Subject: Radeon 9250 DRM in 7.2-RELEASE
In-Reply-To: <49FF4857.4070904@comcast.net>
References: <49FF28BC.5080304@comcast.net>
	<1241460816.1788.22.camel@balrog.2hip.net>
	<49FF387F.1080203@comcast.net>
	<1241464053.1788.32.camel@balrog.2hip.net>
	<49FF4857.4070904@comcast.net>
Message-ID: <1241467827.1788.43.camel@balrog.2hip.net>

Skipped content of type multipart/mixed-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090504/7edac251/attachment.pgp
From korvus at comcast.net  Mon May  4 20:36:14 2009
From: korvus at comcast.net (Steve Polyack)
Date: Mon May  4 20:36:24 2009
Subject: Radeon 9250 DRM in 7.2-RELEASE
In-Reply-To: <1241467827.1788.43.camel@balrog.2hip.net>
References: <49FF28BC.5080304@comcast.net>	
	<1241460816.1788.22.camel@balrog.2hip.net>
	<49FF387F.1080203@comcast.net>	
	<1241464053.1788.32.camel@balrog.2hip.net>
	<49FF4857.4070904@comcast.net>
	<1241467827.1788.43.camel@balrog.2hip.net>
Message-ID: <49FF51BC.5050104@comcast.net>

Robert Noland wrote:
> Ok, they are at least partially disabled...  I wonder if a BIOS update
> would help.
>
> Anyway, the garbled screen issue is usually associated with the caching
> method used on the PCI GART.  On IGP chips we force the GART to be
> uncacheable.  On PCI chips they are supposed to be able to snoop the bus
> and DTRT.  All of the fixes for memory caching should be in 7.
>
> Please try the attached patch and see if that makes a difference.
>
> robert.
>
>   

Unfortunately, this didn't help.  I should also clarify what I'm seeing, 
as it's not complete garbage as I thought.  I have a dual monitor setup, 
side-by-side using xrandr.  When I start X (xfce4) with drm available, 
the left monitor (primary) is a sold light shade of blue, except for a 
black corner which is maybe 10pix square.  The right monitor displays my 
typical background image with another black box over part of it.  If it 
shift back to the console and then back into X, I can see the outlines 
of my startup windows, but they contain garbage and the outlines are 
fuzzed with green and magenta garbage.

From rnoland at FreeBSD.org  Mon May  4 20:49:48 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Mon May  4 20:50:00 2009
Subject: Radeon 9250 DRM in 7.2-RELEASE
In-Reply-To: <49FF51BC.5050104@comcast.net>
References: <49FF28BC.5080304@comcast.net>
	<1241460816.1788.22.camel@balrog.2hip.net>
	<49FF387F.1080203@comcast.net>
	<1241464053.1788.32.camel@balrog.2hip.net>
	<49FF4857.4070904@comcast.net>
	<1241467827.1788.43.camel@balrog.2hip.net>
	<49FF51BC.5050104@comcast.net>
Message-ID: <1241470167.1788.45.camel@balrog.2hip.net>

Skipped content of type multipart/mixed-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090504/c377963e/attachment.pgp
From korvus at comcast.net  Mon May  4 21:41:15 2009
From: korvus at comcast.net (Steve Polyack)
Date: Mon May  4 21:41:21 2009
Subject: Radeon 9250 DRM in 7.2-RELEASE
In-Reply-To: <1241470167.1788.45.camel@balrog.2hip.net>
References: <49FF28BC.5080304@comcast.net>	
	<1241460816.1788.22.camel@balrog.2hip.net>
	<49FF387F.1080203@comcast.net>	
	<1241464053.1788.32.camel@balrog.2hip.net>
	<49FF4857.4070904@comcast.net>	
	<1241467827.1788.43.camel@balrog.2hip.net>
	<49FF51BC.5050104@comcast.net>
	<1241470167.1788.45.camel@balrog.2hip.net>
Message-ID: <49FF60F9.6010303@comcast.net>

Robert Noland wrote:
> ok, how about this one... If this doesn't do it, then we need to start
> digging...
>
> robert.
>
>   

No change when using this patch either.  I've also updated to the latest 
BIOS and have ensured that the onboard Intel adapter is as disabled as 
it can get.  I can provide you some photos of the screen behavior if you 
think it may help.  Thanks again so far!

From rnoland at FreeBSD.org  Mon May  4 21:53:24 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Mon May  4 21:53:30 2009
Subject: Radeon 9250 DRM in 7.2-RELEASE
In-Reply-To: <49FF60F9.6010303@comcast.net>
References: <49FF28BC.5080304@comcast.net>
	<1241460816.1788.22.camel@balrog.2hip.net>
	<49FF387F.1080203@comcast.net>
	<1241464053.1788.32.camel@balrog.2hip.net>
	<49FF4857.4070904@comcast.net>
	<1241467827.1788.43.camel@balrog.2hip.net>
	<49FF51BC.5050104@comcast.net>
	<1241470167.1788.45.camel@balrog.2hip.net>
	<49FF60F9.6010303@comcast.net>
Message-ID: <1241473983.1788.48.camel@balrog.2hip.net>

On Mon, 2009-05-04 at 17:41 -0400, Steve Polyack wrote:
> Robert Noland wrote:
> > ok, how about this one... If this doesn't do it, then we need to start
> > digging...
> >
> > robert.
> >
> >   
> 
> No change when using this patch either.  I've also updated to the latest 
> BIOS and have ensured that the onboard Intel adapter is as disabled as 
> it can get.  I can provide you some photos of the screen behavior if you 
> think it may help.  Thanks again so far!

Ok, so to start with, we need an xorg log and conf.  If you kldload
radeon.ko before starting X then you can set hw.dri.0.debug=1 which will
dump a bunch of drm debugging into /var/log/messages.  That would be
useful.  Also having a look at "memcontrol list" might be a good idea.

robert.

> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090504/0542896b/attachment.pgp
From swehack at gmail.com  Tue May  5 07:07:08 2009
From: swehack at gmail.com (nocturnal)
Date: Tue May  5 07:07:15 2009
Subject: Swedish Macbook keyboard with Xorg
Message-ID: <9aed80930905042344w3146e7g667b3d4e20e874f2@mail.gmail.com>

I just recently installed FreeBSD 7.1 on my Macbook and installed whatever
Xorg distrobution was in packages.

I've tried using macbook79 and pc104 as keyboard layout in Xorg but none of
them seem to have support for the right alt key. I've also tried various
options for the right alt key in xorg.conf that i've found online.

Is it possible to xmodmap the right alt key so it can be used as an option
key for my special chartacters such as \ and |, these characters on a
swedish keyboard require you to press alt+shift+7 or alt+7.

I've been told xmodmap should be able to do this and will look into the
manual today while at work but i can't do anything until i get home. All
i've done so far in xmodmap is disable caps lock, but if it's in the manual
then i'll just read that.

Thank you in advance for any information.

-- 


Med v?nliga h?lsningar

Stefan Midjich aka nocturnal
[SWEHACK] http://swehack.se
From swehack at gmail.com  Tue May  5 07:27:31 2009
From: swehack at gmail.com (nocturnal)
Date: Tue May  5 07:27:36 2009
Subject: Swedish Macbook keyboard with Xorg
Message-ID: <9aed80930905050027q5cd0daaas80e61446564351ec@mail.gmail.com>

I just found this very helpful bit of xmodmap configuration and it makes me
believe it can be done.



! Get \, |, @, ", ~, ` as advertised.
keycode 51 = backslash bar
keycode 11 = 2 at EuroSign
keycode 48 = apostrophe quotedbl
keycode 12 = 3 sterling numbersign
keycode 13 = 4 dollar cent
keycode 49 = grave asciitilde


-- 


Med v?nliga h?lsningar

Stefan Midjich aka nocturnal
[SWEHACK] http://swehack.se
From pj at smo.de  Tue May  5 20:08:08 2009
From: pj at smo.de (Philipp Ost)
Date: Tue May  5 20:08:14 2009
Subject: Radeon 9250 DRM in 7.2-RELEASE
In-Reply-To: <49FF28BC.5080304@comcast.net>
References: <49FF28BC.5080304@comcast.net>
Message-ID: <49FF4E49.4000902@smo.de>

Steve Polyack wrote:
> I upgraded my workstation (via source) to 7.2-RELEASE from 7.1-RELEASE 
> about a day ago.  After the upgrade procedure, I'm having no luck with 
> using DRM in X11.  It worked fine before and gave reasonable 
> performance.  Now when I start up X with DRI enabled, both of my screens 
> display garbage.  The mouse pointer is also not visible.
> 
> I'm using a PCI Radeon 9250.  I can get more details if necessary.  I 
> can also try to revert the kernel DRM module code to 7.1.
> 
>  From dmesg:
> drm2: <ATI Radeon RV280 9250> on vgapci2
> vgapci2: child drm2 requested pci_enable_busmaster
> info: [drm] Initialized radeon 1.29.0 20080528
> info: [drm] Setting GART location based on new memory map
> info: [drm] Loading R200 Microcode
> info: [drm] writeback test succeeded in 2 usecs
> drm2: [ITHREAD]
> 
> Any ideas or suggestions would be appreciated.  Thanks.

I'm using a AGP Radeon 9250. Ever since I enabled direct rendering I get 
similar notifications in dmesg:
info: [drm] Setting GART location based on new memory map
info: [drm] Loading R200 Microcode
info: [drm] writeback test succeeded in 1 usecs
drm0: [ITHREAD]

$ glxinfo | grep rendering
direct rendering: Yes
$

I'm running 7.2-Prerelease (i386) from May, 1.

BTW: hald is not running here, I tweaked my xorg.conf as per the entry 
20090123 in ports/UPDATING.

HTH,
Philipp
From remko at FreeBSD.org  Wed May  6 04:47:49 2009
From: remko at FreeBSD.org (remko@FreeBSD.org)
Date: Wed May  6 04:47:54 2009
Subject: ports/134244: x11: "intel" driver for Xorg is very broken
Message-ID: <200905060447.n464lmlM007550@freefall.freebsd.org>

Old Synopsis: "intel" driver for Xorg is very broken
New Synopsis: x11: "intel" driver for Xorg is very broken

Responsible-Changed-From-To: freebsd-i386->freebsd-x11
Responsible-Changed-By: remko
Responsible-Changed-When: Wed May 6 04:47:23 UTC 2009
Responsible-Changed-Why: 
reassign to X11 team

http://www.freebsd.org/cgi/query-pr.cgi?pr=134244
From markir at paradise.net.nz  Wed May  6 09:13:20 2009
From: markir at paradise.net.nz (Mark Kirkwood)
Date: Wed May  6 09:13:26 2009
Subject: New DPMS behavior in 7.4
Message-ID: <4A015128.9080602@paradise.net.nz>

I've recently upgraded to Xorg 7.4 and Gnome 2.26. I notice that when 
the monitor screen in blanked that the power lamp stays green always - 
never goes to orange (it used to with Xorg 7.3 + Gnome 2.24). Is this 
expected?

System is RELENG_7 from 2009-04-20 with Xorg 7.4 and Gnome 2.26 from ports.

Hardware is ASUS A8VX plus ATI 9600 PRO. I'm using the radeon driver 
with an xrg.conf generated by X -configure. Hopefully relevant sections are:


Section "Module"
    Load  "extmod"
    Load  "record"
    Load  "dbe"
    Load  "glx"
    Load  "dri"
    Load  "dri2"
EndSection

Section "Monitor"
    #DisplaySize      430   270 # mm
    Identifier   "Monitor0"
    VendorName   "HWP"
    ModelName    "HP L2045w"
    HorizSync    24.0 - 93.0
    VertRefresh  50.0 - 76.0
    Option      "DPMS"
EndSection

Section "Device"
    Identifier  "Card0"
    Driver      "radeon"
    VendorName  "ATI Technologies Inc"
    BoardName   "RV350 AP [Radeon 9600]"
    BusID       "PCI:1:0:0"
EndSection




Cheers

Mark
From web at umich.edu  Wed May  6 16:14:53 2009
From: web at umich.edu (William Bulley)
Date: Wed May  6 16:15:00 2009
Subject: Repeatable X lockups
Message-ID: <20090506155612.GA99732@dell1>

According to Jimmie James <jimmiejaz@gmail.com> on Sat, 05/02/09 at 15:46:
>
> When using the xv output driver for vlc or mplayer, X will lockup, crash 
> instantly, trashing the screen and forcing a reboot
> Image of screen corruption: 
> http://img.photobucket.com/albums/v287/jimmiejaz/xcrash.jpg
> 
> This just started manifesting in the past week or so.

I have experienced the same problem, but I didn't see any suggestions
or answers to your posting.  Have you had any success yet with this?
Have you tried any other output drivers?  This is something I plan to
try in the next few days.

My system is i386 with Intel 915 graphics on the motherboard.  Xorg 7.4
runs fine.  When I run mplayer from the command line, in an xterm under
open-motif, the X Windows session dies and I am tossed back to the vty.

When I similarly run vlc from the command line, the screen is locked in
an even worse state than your above URL.  I am forced to ssh(1) in from
another FreeBSD workstation to reboot.  Before the reboot, ps(1) reports
no processes running xorg or any of its child processes, it seems as if
my video hardware has been left in some ugly, locked-up, unusable state.

What is interesting to me is that the same flash file that causes vlc
and mplayer to crash runs just fine in ffplay(1) (part of ffmpeg port).
Yet at least vlc uses ffmpeg, while it doesn't look like mplayer does.

This is 7.2-PRERELEASE built on 24 Apr 2009 with the ports of mplayer
and vlc built on 2 May 2009 following a csup(1) of complete ports tree
on either 24 Apr or 25 Apr - so approximately the same timeframe as you.

Regards,

web...

--
William Bulley                     Email: web@umich.edu

The information contained in this message may be CONFIDENTIAL
and is for the intended addressee only.  Any unauthorized use,
dissemination of the information, or copying of this message
is prohibited.  If you are not the intended addressee, please
notify the sender immediately, and delete this message.

From A.J.Caines at halplant.com  Thu May  7 00:59:55 2009
From: A.J.Caines at halplant.com (Andrew J. Caines)
Date: Thu May  7 01:00:03 2009
Subject: New DPMS behavior in 7.4
In-Reply-To: <4A015128.9080602@paradise.net.nz>
References: <4A015128.9080602@paradise.net.nz>
Message-ID: <4A022E7F.70606@halplant.com>

Mark,

> I've recently upgraded to Xorg 7.4 and Gnome 2.26. I notice that when
> the monitor screen in blanked that the power lamp stays green always -
> never goes to orange (it used to with Xorg 7.3 + Gnome 2.24). Is this
> expected?

I don't know, but you can check the blanking and DPMS and times for
Standby, Suspend and Off with "xset -q", e.g.

#  xset -q
...
Screen Saver:
  prefer blanking:  yes    allow exposures:  yes
  timeout:  600    cycle:  600
...
DPMS (Energy Star):
  Standby: 900    Suspend: 0    Off: 0
  DPMS is Enabled
  Monitor is On

This fits with what I explicitly configure in xorg.conf.

Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        Option         "blank time" "10"
        Option         "standby time" "15"
        Option         "suspend time" "0"
        Option         "off time" "0"
        Option         "AllowEmptyInput" "off"
EndSection

Make sure you have the green_saver kernel module loaded.

# kldstat | fgrep green
32    1 0xc614f000 2000     green_saver.ko

If you don't, then add saver="green" to your rc.conf and "kldload
green_saver".


-- 
-Andrew J. Caines-   Unix Systems Engineer   A.J.Caines@halplant.com
FreeBSD/Linux/Solaris, Web/Mail/Proxy/...   http://halplant.com:2001/
  "Machines take me by surprise with great frequency" - Alan Turing
From jb000003 at mr-happy.com  Thu May  7 16:14:28 2009
From: jb000003 at mr-happy.com (Jeff Blank)
Date: Thu May  7 16:14:34 2009
Subject: loss of X bell with xorg-7.4
Message-ID: <20090507161425.GA8150@mr-happy.com>

Hi,

I've recently upgraded two machines to FreeBSD 7.2-STABLE and
xorg-7.4_1./xorg-server-1.6.0,1, both compiled from ports.  On both
machines, I have no X bell.  There's no problem on a console VTY, only
when in X.  I've been through google, this list's archives, and xorg
man pages, but I can't find any reference to a bell-related setting.
I normally run an 'xset b' command in my .xsession to get the pitch
and volume to my liking--I've tried different values, and I've tried
killing the X server and logging in with no 'xset b' command, but no
luck.  Even just running 'Xorg' from a console VTY, escaping back to
the console, and running 'DISPLAY=:0 xterm' produces no bell, so it
doesn't appear to be anything specific to my user-level X
configuration.

System-wide configuration and log are at http://web.mr-happy.com/xorg/ .

A couple other notes, in case any of this is relevant:
- I don't use KDE, Gnome, or any other "environment", just a .xsession
  and fvwm2.
- I run xdm from /etc/ttys to start my X sessions.
- Xorg is compiled without HAL support (which doesn't seem like it
  should be related, but I guess you never know).
- The two machines are completely unrelated: one is a year-old Dell
  Optiplex, and the other is a 3-year-old component-build thing.

Has anyone else run into this?  Any ideas on what I can check or try?

thanks,
Jeff
From rnoland at FreeBSD.org  Thu May  7 19:33:06 2009
From: rnoland at FreeBSD.org (rnoland@FreeBSD.org)
Date: Thu May  7 19:33:12 2009
Subject: ports/133837: [patch] graphics/libdrm: update to 2.4.9
Message-ID: <200905071933.n47JX5wi029862@freefall.freebsd.org>

Synopsis: [patch] graphics/libdrm: update to 2.4.9

State-Changed-From-To: open->closed
State-Changed-By: rnoland
State-Changed-When: Thu May 7 19:33:05 UTC 2009
State-Changed-Why: 
Committed. Thanks!

http://www.freebsd.org/cgi/query-pr.cgi?pr=133837
From dickey at radix.net  Thu May  7 19:48:06 2009
From: dickey at radix.net (Thomas Dickey)
Date: Thu May  7 19:48:13 2009
Subject: loss of X bell with xorg-7.4
In-Reply-To: <20090507161425.GA8150@mr-happy.com>
References: <20090507161425.GA8150@mr-happy.com>
Message-ID: <20090507193720.GA23324@saltmine.radix.net>

On Thu, May 07, 2009 at 12:14:25PM -0400, Jeff Blank wrote:
> Hi,
> 
> I've recently upgraded two machines to FreeBSD 7.2-STABLE and
> xorg-7.4_1./xorg-server-1.6.0,1, both compiled from ports.  On both
> machines, I have no X bell.  There's no problem on a console VTY, only

If that's using xterm, patch #242 had an error fixed in #243:

Patch #243 - 2009/3/28
     * remove  check  on bell-percentage added in [249]patch #242, which
            disallowed zero/negative values (Redhat Bugzilla #487829).

> when in X.  I've been through google, this list's archives, and xorg
> man pages, but I can't find any reference to a bell-related setting.
> I normally run an 'xset b' command in my .xsession to get the pitch
> and volume to my liking--I've tried different values, and I've tried
> killing the X server and logging in with no 'xset b' command, but no
> luck.  Even just running 'Xorg' from a console VTY, escaping back to
> the console, and running 'DISPLAY=:0 xterm' produces no bell, so it
> doesn't appear to be anything specific to my user-level X
> configuration.
> 
> System-wide configuration and log are at http://web.mr-happy.com/xorg/ .
> 
> A couple other notes, in case any of this is relevant:
> - I don't use KDE, Gnome, or any other "environment", just a .xsession
>   and fvwm2.
> - I run xdm from /etc/ttys to start my X sessions.
> - Xorg is compiled without HAL support (which doesn't seem like it
>   should be related, but I guess you never know).
> - The two machines are completely unrelated: one is a year-old Dell
>   Optiplex, and the other is a 3-year-old component-build thing.
> 
> Has anyone else run into this?  Any ideas on what I can check or try?
> 
> thanks,
> Jeff
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"

-- 
Thomas E. Dickey
http://invisible-island.net
ftp://invisible-island.net
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090507/c26cb134/attachment.pgp
From jb000003 at mr-happy.com  Thu May  7 20:10:48 2009
From: jb000003 at mr-happy.com (Jeff Blank)
Date: Thu May  7 20:10:55 2009
Subject: loss of X bell with xorg-7.4
In-Reply-To: <20090507193720.GA23324@saltmine.radix.net>
References: <20090507161425.GA8150@mr-happy.com>
	<20090507193720.GA23324@saltmine.radix.net>
Message-ID: <20090507201043.GB81980@mr-happy.com>

On Thu, May 07, 2009 at 03:37:20PM -0400, Thomas Dickey wrote:
> > machines, I have no X bell.  There's no problem on a console VTY, only
> 
> If that's using xterm, patch #242 had an error fixed in #243:
> 
> Patch #243 - 2009/3/28
>      * remove  check  on bell-percentage added in [249]patch #242, which
>             disallowed zero/negative values (Redhat Bugzilla #487829).

Wow, I didn't even notice it was just xterm.  I guess that's about the
only thing that beeps at me any more, so when it's quiet, "everything"
is quiet.  Thank you for the pointer.

Jeff
From QAT at FreeBSD.org  Thu May  7 20:23:17 2009
From: QAT at FreeBSD.org (QAT@FreeBSD.org)
Date: Thu May  7 20:23:31 2009
Subject: cvs commit: ports/x11-drivers/xf86-input-joystick Makefile
	distinfo pkg-plist
In-Reply-To: <200905071944.n47Jis7N076761@repoman.freebsd.org>
References: <200905071944.n47Jis7N076761@repoman.freebsd.org>
Message-ID: <20090507200504.6A8958FC4E@release.ixsystems.com>

The Restless Daemon identified a mtree error while trying to build:
 xf86-input-joystick-1.4.1 maintained by x11@FreeBSD.org
 Makefile ident: $FreeBSD: ports/x11-drivers/xf86-input-joystick/Makefile,v 1.6 2009/05/07 19:44:54 rnoland Exp $

Excerpt from http://QAT.TecNik93.com/logs/7-STABLE-FPT-NPD/xf86-input-joystick-1.4.1.log :

   /usr/local/lib/xorg/modules/input

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
Making install in man
test -z "/usr/local/man/man4" || .././install-sh -c -d "/usr/local/man/man4"
 install  -o root -g wheel -m 444 'joystick.4x' '/usr/local/man/man4/joystick.4x'
Making install in config
Making install in include
test -z "/usr/local/include/xorg" || .././install-sh -c -d "/usr/local/include/xorg"
 install  -o root -g wheel -m 444 'joystick-properties.h' '/usr/local/include/xorg/joystick-properties.h'
test -z "/usr/local/libdata/pkgconfig" || ./install-sh -c -d "/usr/local/libdata/pkgconfig"
 install  -o root -g wheel -m 444 'xorg-joystick.pc' '/usr/local/libdata/pkgconfig/xorg-joystick.pc'
===>   Compressing manual pages for xf86-input-joystick-1.4.1
===>   Registering installation for xf86-input-joystick-1.4.1
================================================================
====================<phase 7: make package>====================
===>  Building package for xf86-input-joystick-1.4.1
Creating package /tmp/packages/All/xf86-input-joystick-1.4.1.tbz
Registering depends: xorg-server-1.6.1,1 hal-0.5.11_23 consolekit-0.3.0_8 policykit-0.9_4 dbus-glib-0.80 dbus-1.2.4.4 libxml2-2.7.3 gio-fam-backend-2.20.1 gamin-0.1.10_2 glib-2.20.1 xkeyboard-config-1.5_1 gettext-0.17_1 libiconv-1.11_1 libpciaccess-0.10.6 libGL-7.4.1_1 dri-7.4.1_1,2 libdrm-2.4.9 libXdamage-1.1.1 libXfixes-4.0.3_1 libXxf86vm-1.0.2 libXxf86misc-1.0.1 libXaw-1.0.5_1,1 libXpm-3.5.7 libXp-1.0.0,1 libXmu-1.0.4,1 libXinerama-1.0.3,1 libXi-1.2.1,1 libXext-1.0.5,1 libxkbui-1.0.2_1 libxkbfile-1.0.5 libXt-1.0.5_1 libX11-1.2.1,1 libxcb-1.2_1 libpthread-stubs-0.1 libvolume_id-0.81.1 pcre-7.9 libXdmcp-1.0.2_1 libXau-1.0.4 libSM-1.1.0_1,1 libICE-1.0.4_1,1 libXfont-1.3.4,1 libfontenc-1.0.4 xproto-7.0.15 freetype2-2.3.9_1 pixman-0.15.2 pkg-config-0.23_1 perl-5.8.9_2 xcb-proto-1.4 python25-2.5.4_1 pciids-20090224 dmidecode-2.10 gnome_subr-1.0 expat-2.0.1 fontsproto-2.0.2 damageproto-1.1.0_2 dri2proto-2.0 fixesproto-4.0 inputproto-1.5.0 kbproto-1.0.3 printproto-1.0.4 xextproto-
 7.0.5 xf86miscproto-0.9.2 xf86vidmodeproto-2.2.2 xineramaproto-1.1.2.
Creating bzip'd tar ball in '/tmp/packages/All/xf86-input-joystick-1.4.1.tbz'
Deleting xf86-input-joystick-1.4.1
================================================================

=== Checking filesystem state
list of extra files and directories in / (not present before this port was installed but present after it was deinstalled)
31326117       12 -r--r--r--    1 root             wheel                4928 May  7 20:05 usr/local/include/xorg/joystick-properties.h
================================================================
build of /usr/ports/x11-drivers/xf86-input-joystick ended at Thu May  7 20:05:02 UTC 2009

The tarballed WRKDIR can be found here:
http://QAT.TecNik93.com/wrkdirs/7-STABLE-FPT-NPD/xf86-input-joystick-1.4.1.tbz

PortsMon page for the port:
http://portsmon.freebsd.org/portoverview.py?category=x11-drivers&portname=xf86-input-joystick

The build which triggered this BotMail was done under
tinderbox-devel-3.2_2; dsversion: 3.2 on RELENG_7 on amd64, kern.smp.cpus: 4
with tinderd_flags="-nullfs -plistcheck -onceonly" and ccache support, with the
"official" up-to-date Ports Tree, with the following vars set:
NOPORTDOCS=yes,  NOPORTEXAMPLES=yes, NOPORTDATA=yes, FORCE_PACKAGE=yes.

A description of the testing process can be found here:
http://T32.TecNik93.com/FreeBSD/QA-Tindy/


Thanks for your work on making FreeBSD better,

--
QAT - your friendly neighborhood Daemon,
preparing  a heck of an error trapping system:
 - "HMC and EOI?"
 - "Halt, Melt and Catch fire or Execute Operator Immediately."

From dickey at radix.net  Thu May  7 21:13:15 2009
From: dickey at radix.net (Thomas Dickey)
Date: Thu May  7 21:13:22 2009
Subject: loss of X bell with xorg-7.4
In-Reply-To: <20090507201043.GB81980@mr-happy.com>
References: <20090507161425.GA8150@mr-happy.com>
	<20090507193720.GA23324@saltmine.radix.net>
	<20090507201043.GB81980@mr-happy.com>
Message-ID: <20090507211312.GA14931@saltmine.radix.net>

On Thu, May 07, 2009 at 04:10:43PM -0400, Jeff Blank wrote:
> On Thu, May 07, 2009 at 03:37:20PM -0400, Thomas Dickey wrote:
> > > machines, I have no X bell.  There's no problem on a console VTY, only
> > 
> > If that's using xterm, patch #242 had an error fixed in #243:
> > 
> > Patch #243 - 2009/3/28
> >      * remove  check  on bell-percentage added in [249]patch #242, which
> >             disallowed zero/negative values (Redhat Bugzilla #487829).
> 
> Wow, I didn't even notice it was just xterm.  I guess that's about the
> only thing that beeps at me any more, so when it's quiet, "everything"
> is quiet.  Thank you for the pointer.

no problem (report bugs)

-- 
Thomas E. Dickey
http://invisible-island.net
ftp://invisible-island.net
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090507/f2d042d0/attachment.pgp
From loftin at tmo.blackberry.net  Fri May  8 00:05:11 2009
From: loftin at tmo.blackberry.net (Loftin Graham)
Date: Fri May  8 00:05:18 2009
Subject: Script configure failed unexpectedly
Message-ID: <144585849-1241739390-cardhu_decombobulator_blackberry.rim.net-664359315-@bxe1168.bisx.prod.on.blackberry>

Here's the relevant info (attached).
Please let me know what can be done to get around this problem.

Thanks,
Lg
Sent via BlackBerry from T-Mobile
-------------- next part --------------
A non-text attachment was scrubbed...
Name: =?utf-8?B?Y29uZmlnLmxvZw==?=
Type: application/octet-stream
Size: 20147 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090508/9daab3da/utf-8BY29uZmlnLmxvZw.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: =?utf-8?B?cGtnc19pbnN0YWxsZWQ=?=
Type: application/octet-stream
Size: 2205 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090508/9daab3da/utf-8BcGtnc19pbnN0YWxsZWQ.obj
From jhein at timing.com  Fri May  8 00:47:40 2009
From: jhein at timing.com (John Hein)
Date: Fri May  8 00:47:46 2009
Subject: Script configure failed unexpectedly
In-Reply-To: <144585849-1241739390-cardhu_decombobulator_blackberry.rim.net-664359315-@bxe1168.bisx.prod.on.blackberry>
References: <144585849-1241739390-cardhu_decombobulator_blackberry.rim.net-664359315-@bxe1168.bisx.prod.on.blackberry>
Message-ID: <18947.32384.540724.276410@gromit.timing.com>

Loftin Graham wrote at 23:36 +0000 on May  7, 2009:
 > Here's the relevant info (attached).
 > Please let me know what can be done to get around this problem.
   .
   .
 > Requested 'randrproto >= 1.3' but version of RandrProto is 1.2.1

The config.log output above says you have randrproto 1.2.1

But your 'ls /var/db/pkg' output shows randrproto-1.3.0

Something doesn't seem to fit.

These may help you find your problem...

cat /usr/local/libdata/pkgconfig/randrproto.pc
pkg_info -g -x randrproto
pkg-config --debug --variable=prefix --modversion randrproto
printenv PKG_CONFIG_PATH
ls -ld /usr/X11R6
From rnoland at FreeBSD.org  Fri May  8 02:47:42 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Fri May  8 02:47:48 2009
Subject: Script configure failed unexpectedly
In-Reply-To: <144585849-1241739390-cardhu_decombobulator_blackberry.rim.net-664359315-@bxe1168.bisx.prod.on.blackberry>
References: <144585849-1241739390-cardhu_decombobulator_blackberry.rim.net-664359315-@bxe1168.bisx.prod.on.blackberry>
Message-ID: <1241750835.1733.0.camel@balrog.2hip.net>

On Thu, 2009-05-07 at 23:36 +0000, Loftin Graham wrote:
> Requested 'randrproto >= 1.3' but version of RandrProto is 1.2.1

What was unclear about this?

robert.

-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090508/3ecb2890/attachment.pgp
From dsh at wizard.volgograd.ru  Fri May  8 14:10:40 2009
From: dsh at wizard.volgograd.ru (Denis Shaposhnikov)
Date: Fri May  8 14:10:47 2009
Subject: Xorg crash with xf86-video-intel-2.7.0
Message-ID: <20090508181017.04d44e4b@wizard.volgograd.ru>

Hello,

Today, after portupgrade I've got Xorg crash trying to switch from Xv
window (mplayer) to xterm window. Here is the bt:

Core was generated by `Xorg'.
Program terminated with signal 6, Aborted.
Reading symbols from /usr/local/lib/libpciaccess.so.0...(no debugging
symbols found)...done. Loaded symbols
for /usr/local/lib/libpciaccess.so.0 Reading symbols
from /usr/local/lib/libXfont.so.1...(no debugging symbols
found)...done. Loaded symbols for /usr/local/lib/libXfont.so.1 Reading
symbols from /usr/local/lib/libfreetype.so.9...(no debugging symbols
found)...done. Loaded symbols for /usr/local/lib/libfreetype.so.9
Reading symbols from /usr/local/lib/libXau.so.6...(no debugging symbols
found)...done. Loaded symbols for /usr/local/lib/libXau.so.6 Reading
symbols from /usr/local/lib/libfontenc.so.1...(no debugging symbols
found)...done. Loaded symbols for /usr/local/lib/libfontenc.so.1
Reading symbols from /lib/libz.so.4...(no debugging symbols
found)...done. Loaded symbols for /lib/libz.so.4 Reading symbols
from /usr/local/lib/libpixman-1.so.9...(no debugging symbols
found)...done.
Loaded symbols for /usr/local/lib/libpixman-1.so.9
Reading symbols from /usr/local/lib/libXdmcp.so.6...(no debugging
symbols found)...done. Loaded symbols for /usr/local/lib/libXdmcp.so.6
Reading symbols from /lib/libcrypto.so.5...(no debugging symbols
found)...done. Loaded symbols for /lib/libcrypto.so.5
Reading symbols from /usr/lib/librpcsvc.so.4...(no debugging symbols
found)...done. Loaded symbols for /usr/lib/librpcsvc.so.4
Reading symbols from /lib/libm.so.5...(no debugging symbols
found)...done. Loaded symbols for /lib/libm.so.5
Reading symbols from /lib/libgcc_s.so.1...(no debugging symbols
found)...done. Loaded symbols for /lib/libgcc_s.so.1
Reading symbols from /lib/libc.so.7...(no debugging symbols
found)...done. Loaded symbols for /lib/libc.so.7
Reading symbols
from /usr/local/lib/xorg/modules/extensions//libdbe.so...(no debugging
symbols found)...done. Loaded symbols
for /usr/local/lib/xorg/modules/extensions//libdbe.so Reading symbols
from /usr/local/lib/xorg/modules/extensions//libextmod.so...(no
debugging symbols found)...done.
Loaded symbols for /usr/local/lib/xorg/modules/extensions//libextmod.so
Reading symbols
from /usr/local/lib/xorg/modules/extensions//libglx.so...(no debugging
symbols found)...done. Loaded symbols
for /usr/local/lib/xorg/modules/extensions//libglx.so Reading symbols
from /usr/local/lib/xorg/modules/extensions//librecord.so...(no
debugging symbols found)...done. Loaded symbols
for /usr/local/lib/xorg/modules/extensions//librecord.so Reading
symbols from /usr/local/lib/xorg/modules/extensions//libdri.so...(no
debugging symbols found)...done. Loaded symbols
for /usr/local/lib/xorg/modules/extensions//libdri.so Reading symbols
from /usr/local/lib/libdrm.so.2...(no debugging symbols found)...done.
Loaded symbols for /usr/local/lib/libdrm.so.2 Reading symbols
from /usr/local/lib/xorg/modules/extensions//libdri2.so...(no debugging
symbols found)...done. Loaded symbols
for /usr/local/lib/xorg/modules/extensions//libdri2.so Reading symbols
from /usr/local/lib/xorg/modules/drivers//intel_drv.so...(no debugging
symbols found)...done. Loaded symbols
for /usr/local/lib/xorg/modules/drivers//intel_drv.so Reading symbols
from /usr/local/lib/libdrm_intel.so.1...(no debugging symbols
found)...done.
Loaded symbols for /usr/local/lib/libdrm_intel.so.1
Reading symbols
from /usr/local/lib/xorg/modules/input//mouse_drv.so...(no debugging
symbols found)...done. Loaded symbols
for /usr/local/lib/xorg/modules/input//mouse_drv.so Reading symbols
from /usr/local/lib/xorg/modules/input//kbd_drv.so...(no debugging
symbols found)...done. Loaded symbols
for /usr/local/lib/xorg/modules/input//kbd_drv.so Reading symbols
from /usr/local/lib/xorg/modules//libvgahw.so...(no debugging symbols
found)...done. Loaded symbols
for /usr/local/lib/xorg/modules//libvgahw.so Reading symbols
from /usr/local/lib/xorg/modules//libfb.so...(no debugging symbols
found)...done. Loaded symbols for /usr/local/lib/xorg/modules//libfb.so
Reading symbols from /usr/local/lib/xorg/modules//libexa.so...(no
debugging symbols found)...done. Loaded symbols
for /usr/local/lib/xorg/modules//libexa.so Reading symbols
from /libexec/ld-elf.so.1...(no debugging symbols found)...done. Loaded
symbols for /libexec/ld-elf.so.1 #0  0x2858fea7 in kill ()
from /lib/libc.so.7 (gdb) bt
#0  0x2858fea7 in kill () from /lib/libc.so.7
#1  0x2858fe06 in raise () from /lib/libc.so.7
#2  0x2858ea1a in abort () from /lib/libc.so.7
#3  0x285f21eb in _fence_emit_internal ()
from /usr/local/lib/libdrm_intel.so.1 #4  0x285f25ce in
drm_intel_bufmgr_fake_wait_idle () from /usr/local/lib/libdrm_intel.so.1
#5  0x285f2882 in drm_intel_bufmgr_fake_evict_all ()
   from /usr/local/lib/libdrm_intel.so.1
#6  0x287795bb in I830LeaveVT ()
   from /usr/local/lib/xorg/modules/drivers//intel_drv.so
#7  0x080a35a8 in AbortDDX ()
#8  0x0812b5dd in AbortServer ()
#9  0x0812bbbf in FatalError ()
#10 0x2876aa6f in I830WaitLpRing ()
   from /usr/local/lib/xorg/modules/drivers//intel_drv.so
#11 0x2877935a in i830_stop_ring ()
   from /usr/local/lib/xorg/modules/drivers//intel_drv.so
#12 0x2877a577 in I830EnterVT ()
   from /usr/local/lib/xorg/modules/drivers//intel_drv.so
#13 0x2877b927 in I830ScreenInit ()
   from /usr/local/lib/xorg/modules/drivers//intel_drv.so
#14 0x0806ab8b in AddScreen ()
#15 0x080a3e7c in InitOutput ()
---Type <return> to continue, or q <return> to quit---
#16 0x0806b25b in main ()
(gdb) 

So I've downgraded back to 2.5.1 which is most stable version of
xf86-video-intel.


From rnoland at FreeBSD.org  Fri May  8 15:20:37 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Fri May  8 15:20:43 2009
Subject: Xorg crash with xf86-video-intel-2.7.0
In-Reply-To: <20090508181017.04d44e4b@wizard.volgograd.ru>
References: <20090508181017.04d44e4b@wizard.volgograd.ru>
Message-ID: <1241796005.1733.19.camel@balrog.2hip.net>

On Fri, 2009-05-08 at 18:10 +0400, Denis Shaposhnikov wrote:
> #3  0x285f21eb in _fence_emit_internal ()

Whatever your configuration is, it is trying to use UXA and DRI, which
won't work.  You need to set Option "AccelMethod" "EXA".

You *should* be able to use UXA without DRI and in the testing I've
done, it is faster for at least some workloads.  You won't get hardware
3d though.  I know that I tested UXA without DRI on git master, I don't
recall if it works quite right in 2.7.0.

On Intel, DRI2 requires UXA and the combination also means that it
requires GEM, which we don't have.  It really should reject this
configuration or fallback more gracefully than crashing X.  It attempts
to use the fake buffer manager from libdrm and currently I don't see any
way that this can work.

So, valid configurations for Intel are:

Option "AccelMethod" "EXA"
Option "DRI"

or

Option "AccelMethod" "UXA"
Option "DRI" "off"

robert.

-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090508/f2982092/attachment.pgp
From onemda at gmail.com  Fri May  8 15:48:58 2009
From: onemda at gmail.com (Paul B. Mahol)
Date: Fri May  8 15:49:04 2009
Subject: Xorg crash with xf86-video-intel-2.7.0
In-Reply-To: <1241796005.1733.19.camel@balrog.2hip.net>
References: <20090508181017.04d44e4b@wizard.volgograd.ru>
	<1241796005.1733.19.camel@balrog.2hip.net>
Message-ID: <3a142e750905080848k374b4c53k247a15471bf408be@mail.gmail.com>

On 5/8/09, Robert Noland <rnoland@freebsd.org> wrote:
> On Intel, DRI2 requires UXA and the combination also means that it
> requires GEM, which we don't have.

>From Xorg mailing list my assumption was that UXA should work
without GEM but not without KMS.(just DRI1 here with EXA)

-- 
Paul
From rnoland at FreeBSD.org  Fri May  8 15:55:17 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Fri May  8 15:55:24 2009
Subject: Xorg crash with xf86-video-intel-2.7.0
In-Reply-To: <3a142e750905080848k374b4c53k247a15471bf408be@mail.gmail.com>
References: <20090508181017.04d44e4b@wizard.volgograd.ru>
	<1241796005.1733.19.camel@balrog.2hip.net>
	<3a142e750905080848k374b4c53k247a15471bf408be@mail.gmail.com>
Message-ID: <1241798091.1733.30.camel@balrog.2hip.net>

On Fri, 2009-05-08 at 17:48 +0200, Paul B. Mahol wrote:
> On 5/8/09, Robert Noland <rnoland@freebsd.org> wrote:
> > On Intel, DRI2 requires UXA and the combination also means that it
> > requires GEM, which we don't have.
> 
> From Xorg mailing list my assumption was that UXA should work
> without GEM but not without KMS.(just DRI1 here with EXA)

My reading of keithp's response was that it should work, but it just
can't.  libdrm using the fake buffer manager tries to use emit/wait irq
for fencing which expects to have the shared lock held.  In DRI2 there
is no shared lock.  I've tried removing the requirement to have the lock
held in drm, only to have X consume 100% cpu and wedge.  I think that
keithp's comment is misleading.

robert.

-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090508/7450f95f/attachment.pgp
From gorshkov.pavel at gmail.com  Fri May  8 20:57:41 2009
From: gorshkov.pavel at gmail.com (Pavel Gorshkov)
Date: Fri May  8 20:57:48 2009
Subject: no luck with Xorg + Mobility Radeon HD 3470
Message-ID: <20090508204455.GA5549@localhost>

The problem is in some ways similar to what is being discussed in
this thread:
http://lists.freebsd.org/mailman/htdig/freebsd-x11/2009-May/008342.html

However my configuration is different: fresh install of FreeBSD
7.2/amd64 on a brand new Fujitsu Lifebook A6210, Xorg built from
today's ports tree (with all the latest updates from rnoland@).

Using `Driver "radeon"' results in a hard hang, while with
`Driver "radeonhd"' (1.2.5 or git), there's nothing but garbage on
the screen, however I can still switch back to VT0 and hit Ctrl-C.


Robert, could you please have a look at the following logs?

pciconf -lvb:
vgapci0@pci0:1:0:0:     class=0x030000 card=0x14b010cf chip=0x95c41002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    class      = display
    subclass   = VGA
    bar   [10] = type Prefetchable Memory, range 32, base 0xf0000000, size 134217728, enabled
    bar   [14] = type I/O Port, range 32, base 0x2000, size 256, enabled
    bar   [18] = type Memory, range 32, base 0xfa000000, size 65536, enabled

xorg.conf (autogenerated by `X -configure', with a few minor
tweaks, so nothing special there):
http://pastebin.com/m7114722

Xorg.0.log
http://pastebin.com/m58e83310

messages generated by hw.dri.0.debug=1
http://pastebin.com/m24308c77

memcontrol list
http://pastebin.com/m616d6f9f


Thanks in advance,
Pavel Gorshkov
From rnoland at FreeBSD.org  Fri May  8 21:21:05 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Fri May  8 21:21:11 2009
Subject: no luck with Xorg + Mobility Radeon HD 3470
In-Reply-To: <20090508204455.GA5549@localhost>
References: <20090508204455.GA5549@localhost>
Message-ID: <1241817638.1733.41.camel@balrog.2hip.net>

On Sat, 2009-05-09 at 00:44 +0400, Pavel Gorshkov wrote:
> The problem is in some ways similar to what is being discussed in
> this thread:
> http://lists.freebsd.org/mailman/htdig/freebsd-x11/2009-May/008342.html
> 
> However my configuration is different: fresh install of FreeBSD
> 7.2/amd64 on a brand new Fujitsu Lifebook A6210, Xorg built from
> today's ports tree (with all the latest updates from rnoland@).
> 
> Using `Driver "radeon"' results in a hard hang, while with
> `Driver "radeonhd"' (1.2.5 or git), there's nothing but garbage on
> the screen, however I can still switch back to VT0 and hit Ctrl-C.
> 
> 
> Robert, could you please have a look at the following logs?
> 
> pciconf -lvb:
> vgapci0@pci0:1:0:0:     class=0x030000 card=0x14b010cf chip=0x95c41002 rev=0x00 hdr=0x00
>     vendor     = 'ATI Technologies Inc'
>     class      = display
>     subclass   = VGA
>     bar   [10] = type Prefetchable Memory, range 32, base 0xf0000000, size 134217728, enabled
>     bar   [14] = type I/O Port, range 32, base 0x2000, size 256, enabled
>     bar   [18] = type Memory, range 32, base 0xfa000000, size 65536, enabled
> 
> xorg.conf (autogenerated by `X -configure', with a few minor
> tweaks, so nothing special there):
> http://pastebin.com/m7114722
> 
> Xorg.0.log
> http://pastebin.com/m58e83310

Please set Option "AccelMethod" "EXA" in your device section.  Either
driver *should* work.  Note that if you card has HDMI that I've recently
discoved that mplayer/totem appear to try and sync video to the audio
and if the HDMI port is the default codec then the video will play way
too fast.  The solutions that I have found at the moment are to use the
radeonhd driver with the "Audio" option enabled.  Or to set
hw.snd.default_unit=X, where X is the proper system codec.

robert.

> messages generated by hw.dri.0.debug=1
> http://pastebin.com/m24308c77
> 
> memcontrol list
> http://pastebin.com/m616d6f9f
> 
> 
> Thanks in advance,
> Pavel Gorshkov
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090508/f39bd9f7/attachment.pgp
From dsh at wizard.volgograd.ru  Fri May  8 22:07:28 2009
From: dsh at wizard.volgograd.ru (Denis Shaposhnikov)
Date: Fri May  8 22:07:35 2009
Subject: Xorg crash with xf86-video-intel-2.7.0
In-Reply-To: <1241796005.1733.19.camel@balrog.2hip.net>
References: <20090508181017.04d44e4b@wizard.volgograd.ru>
	<1241796005.1733.19.camel@balrog.2hip.net>
Message-ID: <20090509020720.349a00d6@wizard.volgograd.ru>

Hello,

On Fri, 08 May 2009 10:20:05 -0500
Robert Noland <rnoland@FreeBSD.org> wrote:

> So, valid configurations for Intel are:

Thanks for your help, but it didn't help. I'm having Xorg crash with any
config.

> Option "AccelMethod" "EXA"
> Option "DRI"

Here "bt" with EXA:

(gdb) bt
#0  0x288b9930 in ?? ()
#1  0x285e6859 in drmIoctl () from /usr/local/lib/libdrm.so.2
#2  0x285e6d5a in drmCtlUninstHandler () from /usr/local/lib/libdrm.so.2
#3  0x287798c6 in i830WaitSync ()
   from /usr/local/lib/xorg/modules/drivers//intel_drv.so
#4  0x080a35a8 in AbortDDX ()
#5  0x0812b5dd in AbortServer ()
#6  0x0812bbbf in FatalError ()
#7  0x080ba2b3 in xf86SigHandler ()
#8  <signal handler called>
#9  0x288b5320 in ?? ()
#10 0x285913a4 in pthread_mutex_lock () from /lib/libc.so.7
#11 0x285f201b in drm_intel_fake_bo_unmap ()
   from /usr/local/lib/libdrm_intel.so.1
#12 0x285f13f2 in drm_intel_bo_unmap ()
from /usr/local/lib/libdrm_intel.so.1 #13 0x2876c3b0 in i830_crt_detect
() from /usr/local/lib/xorg/modules/drivers//intel_drv.so
#14 0x2876bb3f in i830_crt_mode_set ()
   from /usr/local/lib/xorg/modules/drivers//intel_drv.so
#15 0x287796f6 in I830CloseScreen ()
   from /usr/local/lib/xorg/modules/drivers//intel_drv.so
#16 0x28779b68 in IntelEmitInvarientState ()
   from /usr/local/lib/xorg/modules/drivers//intel_drv.so
---Type <return> to continue, or q <return> to quit---
#17 0x0814baee in RRExtensionInit ()
#18 0x080c120e in xf86ChangeGammaRamp ()
#19 0x080b9dc4 in xf86DPMSInit ()
#20 0x285c8ff4 in XvCloseScreen ()
   from /usr/local/lib/xorg/modules/extensions//libextmod.so
#21 0x080d0bfc in xf86XvMCCreateAdaptorRec ()
#22 0x285ce09d in XvMCCloseScreen ()
   from /usr/local/lib/xorg/modules/extensions//libextmod.so
#23 0x080bddc1 in VidModeExtensionInit ()
#24 0x081370e5 in XFixesCursorInit ()
#25 0x081659cc in AnimCurInit ()
#26 0x0813105b in CompositeExtensionInit ()
#27 0x287396da in glxCloseScreen ()
   from /usr/local/lib/xorg/modules/extensions//libglx.so
#28 0x0806b4b5 in main ()
(gdb) 

> Option "AccelMethod" "UXA"
> Option "DRI" "off"

and here "bt" with UXA:

(gdb) bt
#0  0x288ae320 in ?? ()
#1  0x285913a4 in pthread_mutex_lock () from /lib/libc.so.7
#2  0x285f201b in drm_intel_fake_bo_unmap ()
   from /usr/local/lib/libdrm_intel.so.1
#3  0x285f13f2 in drm_intel_bo_unmap ()
from /usr/local/lib/libdrm_intel.so.1 #4  0x2876b2f0 in
intel_batch_flush ()
from /usr/local/lib/xorg/modules/drivers//intel_drv.so #5  0x2876ab24
in I830Sync () from /usr/local/lib/xorg/modules/drivers//intel_drv.so
#6  0x28779410 in I830LeaveVT ()
   from /usr/local/lib/xorg/modules/drivers//intel_drv.so
#7  0x080a35a8 in AbortDDX ()
#8  0x0812b5dd in AbortServer ()
#9  0x0812bbbf in FatalError ()
#10 0x080ba2b3 in xf86SigHandler ()
#11 <signal handler called>
#12 0x288ae320 in ?? ()
#13 0x285913a4 in pthread_mutex_lock () from /lib/libc.so.7
#14 0x285f201b in drm_intel_fake_bo_unmap ()
   from /usr/local/lib/libdrm_intel.so.1
#15 0x285f13f2 in drm_intel_bo_unmap ()
from /usr/local/lib/libdrm_intel.so.1 #16 0x2876b2f0 in
intel_batch_flush ()
from /usr/local/lib/xorg/modules/drivers//intel_drv.so
---Type <return> to continue, or q <return> to quit---
#17 0x2876ab24 in I830Sync ()
   from /usr/local/lib/xorg/modules/drivers//intel_drv.so
#18 0x28779410 in I830LeaveVT ()
   from /usr/local/lib/xorg/modules/drivers//intel_drv.so
#19 0x287798a3 in I830CloseScreen ()
   from /usr/local/lib/xorg/modules/drivers//intel_drv.so
#20 0x0814baee in RRExtensionInit ()
#21 0x080c120e in xf86ChangeGammaRamp ()
#22 0x080b9dc4 in xf86DPMSInit ()
#23 0x285c8ff4 in XvCloseScreen ()
   from /usr/local/lib/xorg/modules/extensions//libextmod.so
#24 0x080bddc1 in VidModeExtensionInit ()
#25 0x081370e5 in XFixesCursorInit ()
#26 0x081659cc in AnimCurInit ()
#27 0x0813105b in CompositeExtensionInit ()
#28 0x287396da in glxCloseScreen ()
   from /usr/local/lib/xorg/modules/extensions//libglx.so
#29 0x0806b4b5 in main ()
(gdb) 
From rnoland at FreeBSD.org  Fri May  8 22:38:46 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Fri May  8 22:38:52 2009
Subject: Xorg crash with xf86-video-intel-2.7.0
In-Reply-To: <20090509020720.349a00d6@wizard.volgograd.ru>
References: <20090508181017.04d44e4b@wizard.volgograd.ru>
	<1241796005.1733.19.camel@balrog.2hip.net>
	<20090509020720.349a00d6@wizard.volgograd.ru>
Message-ID: <1241822299.1733.54.camel@balrog.2hip.net>

On Sat, 2009-05-09 at 02:07 +0400, Denis Shaposhnikov wrote:
> Hello,
> 
> On Fri, 08 May 2009 10:20:05 -0500
> Robert Noland <rnoland@FreeBSD.org> wrote:
> 
> > So, valid configurations for Intel are:
> 
> Thanks for your help, but it didn't help. I'm having Xorg crash with any
> config.
> 
> > Option "AccelMethod" "EXA"
> > Option "DRI"
> 
> Here "bt" with EXA:
> 
> (gdb) bt
> #0  0x288b9930 in ?? ()
> #1  0x285e6859 in drmIoctl () from /usr/local/lib/libdrm.so.2
> #2  0x285e6d5a in drmCtlUninstHandler () from /usr/local/lib/libdrm.so.2
> #3  0x287798c6 in i830WaitSync ()
>    from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> #4  0x080a35a8 in AbortDDX ()
> #5  0x0812b5dd in AbortServer ()
> #6  0x0812bbbf in FatalError ()
> #7  0x080ba2b3 in xf86SigHandler ()
> #8  <signal handler called>
> #9  0x288b5320 in ?? ()
> #10 0x285913a4 in pthread_mutex_lock () from /lib/libc.so.7
> #11 0x285f201b in drm_intel_fake_bo_unmap ()
>    from /usr/local/lib/libdrm_intel.so.1
> #12 0x285f13f2 in drm_intel_bo_unmap ()
> from /usr/local/lib/libdrm_intel.so.1 #13 0x2876c3b0 in i830_crt_detect
> () from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> #14 0x2876bb3f in i830_crt_mode_set ()
>    from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> #15 0x287796f6 in I830CloseScreen ()
>    from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> #16 0x28779b68 in IntelEmitInvarientState ()
>    from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> ---Type <return> to continue, or q <return> to quit---
> #17 0x0814baee in RRExtensionInit ()
> #18 0x080c120e in xf86ChangeGammaRamp ()
> #19 0x080b9dc4 in xf86DPMSInit ()
> #20 0x285c8ff4 in XvCloseScreen ()
>    from /usr/local/lib/xorg/modules/extensions//libextmod.so
> #21 0x080d0bfc in xf86XvMCCreateAdaptorRec ()
> #22 0x285ce09d in XvMCCloseScreen ()
>    from /usr/local/lib/xorg/modules/extensions//libextmod.so
> #23 0x080bddc1 in VidModeExtensionInit ()
> #24 0x081370e5 in XFixesCursorInit ()
> #25 0x081659cc in AnimCurInit ()
> #26 0x0813105b in CompositeExtensionInit ()
> #27 0x287396da in glxCloseScreen ()
>    from /usr/local/lib/xorg/modules/extensions//libglx.so
> #28 0x0806b4b5 in main ()
> (gdb) 

Can you send me both your xorg.conf and xorg.log... With EXA and DRI.

robert.

> > Option "AccelMethod" "UXA"
> > Option "DRI" "off"
> 
> and here "bt" with UXA:
> 
> (gdb) bt
> #0  0x288ae320 in ?? ()
> #1  0x285913a4 in pthread_mutex_lock () from /lib/libc.so.7
> #2  0x285f201b in drm_intel_fake_bo_unmap ()
>    from /usr/local/lib/libdrm_intel.so.1
> #3  0x285f13f2 in drm_intel_bo_unmap ()
> from /usr/local/lib/libdrm_intel.so.1 #4  0x2876b2f0 in
> intel_batch_flush ()
> from /usr/local/lib/xorg/modules/drivers//intel_drv.so #5  0x2876ab24
> in I830Sync () from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> #6  0x28779410 in I830LeaveVT ()
>    from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> #7  0x080a35a8 in AbortDDX ()
> #8  0x0812b5dd in AbortServer ()
> #9  0x0812bbbf in FatalError ()
> #10 0x080ba2b3 in xf86SigHandler ()
> #11 <signal handler called>
> #12 0x288ae320 in ?? ()
> #13 0x285913a4 in pthread_mutex_lock () from /lib/libc.so.7
> #14 0x285f201b in drm_intel_fake_bo_unmap ()
>    from /usr/local/lib/libdrm_intel.so.1
> #15 0x285f13f2 in drm_intel_bo_unmap ()
> from /usr/local/lib/libdrm_intel.so.1 #16 0x2876b2f0 in
> intel_batch_flush ()
> from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> ---Type <return> to continue, or q <return> to quit---
> #17 0x2876ab24 in I830Sync ()
>    from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> #18 0x28779410 in I830LeaveVT ()
>    from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> #19 0x287798a3 in I830CloseScreen ()
>    from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> #20 0x0814baee in RRExtensionInit ()
> #21 0x080c120e in xf86ChangeGammaRamp ()
> #22 0x080b9dc4 in xf86DPMSInit ()
> #23 0x285c8ff4 in XvCloseScreen ()
>    from /usr/local/lib/xorg/modules/extensions//libextmod.so
> #24 0x080bddc1 in VidModeExtensionInit ()
> #25 0x081370e5 in XFixesCursorInit ()
> #26 0x081659cc in AnimCurInit ()
> #27 0x0813105b in CompositeExtensionInit ()
> #28 0x287396da in glxCloseScreen ()
>    from /usr/local/lib/xorg/modules/extensions//libglx.so
> #29 0x0806b4b5 in main ()
> (gdb) 
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090508/41afe274/attachment.pgp
From rnoland at FreeBSD.org  Fri May  8 22:58:54 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Fri May  8 22:59:01 2009
Subject: Xorg crash with xf86-video-intel-2.7.0
In-Reply-To: <1241822299.1733.54.camel@balrog.2hip.net>
References: <20090508181017.04d44e4b@wizard.volgograd.ru>
	<1241796005.1733.19.camel@balrog.2hip.net>
	<20090509020720.349a00d6@wizard.volgograd.ru>
	<1241822299.1733.54.camel@balrog.2hip.net>
Message-ID: <1241823505.1733.56.camel@balrog.2hip.net>

On Fri, 2009-05-08 at 17:38 -0500, Robert Noland wrote:
> On Sat, 2009-05-09 at 02:07 +0400, Denis Shaposhnikov wrote:
> > Hello,
> > 
> > On Fri, 08 May 2009 10:20:05 -0500
> > Robert Noland <rnoland@FreeBSD.org> wrote:
> > 
> > > So, valid configurations for Intel are:
> > 
> > Thanks for your help, but it didn't help. I'm having Xorg crash with any
> > config.
> > 
> > > Option "AccelMethod" "EXA"
> > > Option "DRI"
> > 
> > Here "bt" with EXA:
> > 
> > (gdb) bt
> > #0  0x288b9930 in ?? ()
> > #1  0x285e6859 in drmIoctl () from /usr/local/lib/libdrm.so.2
> > #2  0x285e6d5a in drmCtlUninstHandler () from /usr/local/lib/libdrm.so.2
> > #3  0x287798c6 in i830WaitSync ()
> >    from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> > #4  0x080a35a8 in AbortDDX ()
> > #5  0x0812b5dd in AbortServer ()
> > #6  0x0812bbbf in FatalError ()
> > #7  0x080ba2b3 in xf86SigHandler ()
> > #8  <signal handler called>
> > #9  0x288b5320 in ?? ()
> > #10 0x285913a4 in pthread_mutex_lock () from /lib/libc.so.7
> > #11 0x285f201b in drm_intel_fake_bo_unmap ()
> >    from /usr/local/lib/libdrm_intel.so.1
> > #12 0x285f13f2 in drm_intel_bo_unmap ()
> > from /usr/local/lib/libdrm_intel.so.1 #13 0x2876c3b0 in i830_crt_detect
> > () from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> > #14 0x2876bb3f in i830_crt_mode_set ()
> >    from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> > #15 0x287796f6 in I830CloseScreen ()
> >    from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> > #16 0x28779b68 in IntelEmitInvarientState ()
> >    from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> > ---Type <return> to continue, or q <return> to quit---
> > #17 0x0814baee in RRExtensionInit ()
> > #18 0x080c120e in xf86ChangeGammaRamp ()
> > #19 0x080b9dc4 in xf86DPMSInit ()
> > #20 0x285c8ff4 in XvCloseScreen ()
> >    from /usr/local/lib/xorg/modules/extensions//libextmod.so
> > #21 0x080d0bfc in xf86XvMCCreateAdaptorRec ()
> > #22 0x285ce09d in XvMCCloseScreen ()
> >    from /usr/local/lib/xorg/modules/extensions//libextmod.so
> > #23 0x080bddc1 in VidModeExtensionInit ()
> > #24 0x081370e5 in XFixesCursorInit ()
> > #25 0x081659cc in AnimCurInit ()
> > #26 0x0813105b in CompositeExtensionInit ()
> > #27 0x287396da in glxCloseScreen ()
> >    from /usr/local/lib/xorg/modules/extensions//libglx.so
> > #28 0x0806b4b5 in main ()
> > (gdb) 
> 
> Can you send me both your xorg.conf and xorg.log... With EXA and DRI.

Was this only an issue with Xv?  I think there may be a fix for Xv with
large textures in the 2.7 branch of Intel git.

robert.

> robert.
> 
> > > Option "AccelMethod" "UXA"
> > > Option "DRI" "off"
> > 
> > and here "bt" with UXA:
> > 
> > (gdb) bt
> > #0  0x288ae320 in ?? ()
> > #1  0x285913a4 in pthread_mutex_lock () from /lib/libc.so.7
> > #2  0x285f201b in drm_intel_fake_bo_unmap ()
> >    from /usr/local/lib/libdrm_intel.so.1
> > #3  0x285f13f2 in drm_intel_bo_unmap ()
> > from /usr/local/lib/libdrm_intel.so.1 #4  0x2876b2f0 in
> > intel_batch_flush ()
> > from /usr/local/lib/xorg/modules/drivers//intel_drv.so #5  0x2876ab24
> > in I830Sync () from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> > #6  0x28779410 in I830LeaveVT ()
> >    from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> > #7  0x080a35a8 in AbortDDX ()
> > #8  0x0812b5dd in AbortServer ()
> > #9  0x0812bbbf in FatalError ()
> > #10 0x080ba2b3 in xf86SigHandler ()
> > #11 <signal handler called>
> > #12 0x288ae320 in ?? ()
> > #13 0x285913a4 in pthread_mutex_lock () from /lib/libc.so.7
> > #14 0x285f201b in drm_intel_fake_bo_unmap ()
> >    from /usr/local/lib/libdrm_intel.so.1
> > #15 0x285f13f2 in drm_intel_bo_unmap ()
> > from /usr/local/lib/libdrm_intel.so.1 #16 0x2876b2f0 in
> > intel_batch_flush ()
> > from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> > ---Type <return> to continue, or q <return> to quit---
> > #17 0x2876ab24 in I830Sync ()
> >    from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> > #18 0x28779410 in I830LeaveVT ()
> >    from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> > #19 0x287798a3 in I830CloseScreen ()
> >    from /usr/local/lib/xorg/modules/drivers//intel_drv.so
> > #20 0x0814baee in RRExtensionInit ()
> > #21 0x080c120e in xf86ChangeGammaRamp ()
> > #22 0x080b9dc4 in xf86DPMSInit ()
> > #23 0x285c8ff4 in XvCloseScreen ()
> >    from /usr/local/lib/xorg/modules/extensions//libextmod.so
> > #24 0x080bddc1 in VidModeExtensionInit ()
> > #25 0x081370e5 in XFixesCursorInit ()
> > #26 0x081659cc in AnimCurInit ()
> > #27 0x0813105b in CompositeExtensionInit ()
> > #28 0x287396da in glxCloseScreen ()
> >    from /usr/local/lib/xorg/modules/extensions//libglx.so
> > #29 0x0806b4b5 in main ()
> > (gdb) 
> > _______________________________________________
> > freebsd-x11@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> > To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090508/ed2a562d/attachment.pgp
From gorshkov.pavel at gmail.com  Fri May  8 23:08:34 2009
From: gorshkov.pavel at gmail.com (Pavel Gorshkov)
Date: Fri May  8 23:08:40 2009
Subject: no luck with Xorg + Mobility Radeon HD 3470
In-Reply-To: <1241817638.1733.41.camel@balrog.2hip.net>
References: <20090508204455.GA5549@localhost>
	<1241817638.1733.41.camel@balrog.2hip.net>
Message-ID: <20090508230828.GA6916@localhost>

On Fri, May 08, 2009 at 04:20:38PM -0500, Robert Noland wrote:
> Please set Option "AccelMethod" "EXA" in your device section.  Either
> driver *should* work.  Note that if you card has HDMI that I've recently
> discoved that mplayer/totem appear to try and sync video to the audio
> and if the HDMI port is the default codec then the video will play way
> too fast.  The solutions that I have found at the moment are to use the
> radeonhd driver with the "Audio" option enabled.  Or to set
> hw.snd.default_unit=X, where X is the proper system codec.

It worked!  Thank you very much Robert, sorry to have bothered you
with such a trivial matter.
From alex.wilkinson at dsto.defence.gov.au  Sat May  9 03:14:16 2009
From: alex.wilkinson at dsto.defence.gov.au (Wilkinson, Alex)
Date: Sat May  9 03:14:24 2009
Subject: Xorg crash with xf86-video-intel-2.7.0
In-Reply-To: <1241796005.1733.19.camel@balrog.2hip.net>
References: <20090508181017.04d44e4b@wizard.volgograd.ru> 
	<1241796005.1733.19.camel@balrog.2hip.net>
Message-ID: <20090509025016.GX23429@stlux503.dsto.defence.gov.au>


    0n Fri, May 08, 2009 at 10:20:05AM -0500, Robert Noland wrote: 

    >On Fri, 2009-05-08 at 18:10 +0400, Denis Shaposhnikov wrote:
    >> #3  0x285f21eb in _fence_emit_internal ()
    >
    >Whatever your configuration is, it is trying to use UXA and DRI, which
    >won't work.  You need to set Option "AccelMethod" "EXA".

OK, what is the difference between UXA and EXA ?

  -aW

IMPORTANT: This email remains the property of the Australian Defence Organisation and is subject to the jurisdiction of section 70 of the CRIMES ACT 1914.  If you have received this email in error, you are requested to contact the sender and delete the email.

From markocpc at gmail.com  Sat May  9 07:59:05 2009
From: markocpc at gmail.com (Lagrange Marc)
Date: Sat May  9 07:59:11 2009
Subject: Dual ATI card doesn't work - RADEON HD 3650 and RADEON 7000
Message-ID: <1b5ab4050905090032s7ce486d2x5c75e1589db2cfd9@mail.gmail.com>

Hi,

I'm trying to setting an dual ATI cards multi-head with a RADEON HD
3650 and a RADEON 7000:

vgapci1@pci0:2:0:0:	class=0x030000 card=0xe410174b chip=0x95981002
rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    class      = display
    subclass   = VGA
    bar   [10] = type Prefetchable Memory, range 64, base 0xd0000000,
size 268435456, enabled
    bar   [18] = type Memory, range 64, base 0xfd7f0000, size 65536, enabled
    bar   [20] = type I/O Port, range 32, base 0xd000, size 256, enabled
vgapci0@pci0:1:8:0:	class=0x030000 card=0x0020174b chip=0x51591002
rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'RV100 Radeon 7000 / Radeon VE'
    class      = display
    subclass   = VGA
    bar   [10] = type Prefetchable Memory, range 32, base 0xc8000000,
size 134217728, enabled
    bar   [14] = type I/O Port, range 32, base 0xc000, size 256, enabled
    bar   [18] = type Memory, range 32, base 0xfd6f0000, size 65536, enabled

But i can't get both working, with 'radeonhd' for both cards, get X
started but can't get the radeon 7000 working, wth 'radeon' for both
blinking cursor -> no X, and 'radeonhd' for HD 3650 and 'radeon' for
the radeon 7000, blinking cursor too...

My Xorg.conf:
  http://banane.rhaamo.li/problem_ati/xorg.conf

The Xorg.log.0 (with 'radeonhd' for both):
  http://banane.rhaamo.li/problem_ati/Xorg.0.log

The 'xrandr' output when 'radeonhd' for both:
  http://banane.rhaamo.li/problem_ati/xrandr

The Xorg.log.0 when setting 'radeon' for both:
  http://banane.rhaamo.li/problem_ati/xorg.log.radeon_both

If somebody can help me to get this working it will be great :)
From rnoland at FreeBSD.org  Sat May  9 12:37:51 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Sat May  9 12:37:58 2009
Subject: Xorg crash with xf86-video-intel-2.7.0
In-Reply-To: <20090509025016.GX23429@stlux503.dsto.defence.gov.au>
References: <20090508181017.04d44e4b@wizard.volgograd.ru>
	<1241796005.1733.19.camel@balrog.2hip.net>
	<20090509025016.GX23429@stlux503.dsto.defence.gov.au>
Message-ID: <1241872633.1733.66.camel@balrog.2hip.net>

On Sat, 2009-05-09 at 10:50 +0800, Wilkinson, Alex wrote:
> 0n Fri, May 08, 2009 at 10:20:05AM -0500, Robert Noland wrote: 
> 
>     >On Fri, 2009-05-08 at 18:10 +0400, Denis Shaposhnikov wrote:
>     >> #3  0x285f21eb in _fence_emit_internal ()
>     >
>     >Whatever your configuration is, it is trying to use UXA and DRI, which
>     >won't work.  You need to set Option "AccelMethod" "EXA".
> 
> OK, what is the difference between UXA and EXA ?

UXA is EXA modified by Intel to be more friendly to their architecture.
i.e. UMA architecture not having real memory, but instead using system
memory.  It is only applicable to Intel, but it is the only supported
AccelMethod beyond the 2.7.x driver series.

robert.

>   -aW
> 
> IMPORTANT: This email remains the property of the Australian Defence Organisation and is subject to the jurisdiction of section 70 of the CRIMES ACT 1914.  If you have received this email in error, you are requested to contact the sender and delete the email.
> 
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090509/8c13ced5/attachment.pgp
From dsh at wizard.volgograd.ru  Sat May  9 19:28:51 2009
From: dsh at wizard.volgograd.ru (Denis Shaposhnikov)
Date: Sat May  9 19:28:58 2009
Subject: Xorg crash with xf86-video-intel-2.7.0
In-Reply-To: <1241823505.1733.56.camel@balrog.2hip.net>
References: <20090508181017.04d44e4b@wizard.volgograd.ru>
	<1241796005.1733.19.camel@balrog.2hip.net>
	<20090509020720.349a00d6@wizard.volgograd.ru>
	<1241822299.1733.54.camel@balrog.2hip.net>
	<1241823505.1733.56.camel@balrog.2hip.net>
Message-ID: <20090509232845.01736d0e@wizard.volgograd.ru>

Hello,

On Fri, 08 May 2009 17:58:25 -0500
Robert Noland <rnoland@FreeBSD.org> wrote:

> Was this only an issue with Xv?  I think there may be a fix for Xv
> with large textures in the 2.7 branch of Intel git.

Yes, Xv only affected. Right now I'm using 2.7.0.901 from the git and it
seems work fine. I've tried switching from a Xv window to an xterm one
and Xorg still alive. It's like my problem was fixed.
From rnoland at FreeBSD.org  Sat May  9 20:04:47 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Sat May  9 20:04:54 2009
Subject: Xorg crash with xf86-video-intel-2.7.0
In-Reply-To: <20090509232845.01736d0e@wizard.volgograd.ru>
References: <20090508181017.04d44e4b@wizard.volgograd.ru>
	<1241796005.1733.19.camel@balrog.2hip.net>
	<20090509020720.349a00d6@wizard.volgograd.ru>
	<1241822299.1733.54.camel@balrog.2hip.net>
	<1241823505.1733.56.camel@balrog.2hip.net>
	<20090509232845.01736d0e@wizard.volgograd.ru>
Message-ID: <1241899457.1779.1.camel@balrog.2hip.net>

On Sat, 2009-05-09 at 23:28 +0400, Denis Shaposhnikov wrote:
> Hello,
> 
> On Fri, 08 May 2009 17:58:25 -0500
> Robert Noland <rnoland@FreeBSD.org> wrote:
> 
> > Was this only an issue with Xv?  I think there may be a fix for Xv
> > with large textures in the 2.7 branch of Intel git.
> 
> Yes, Xv only affected. Right now I'm using 2.7.0.901 from the git and it
> seems work fine. I've tried switching from a Xv window to an xterm one
> and Xorg still alive. It's like my problem was fixed.

Yes, there was a commit or two dealing with Xv and large virtual
buffers.  2.7.1 should be released fairly soon.

robert.

-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090509/5296b04c/attachment.pgp
From vinnix.bsd at gmail.com  Sun May 10 03:55:33 2009
From: vinnix.bsd at gmail.com (Vinicius Abrahao)
Date: Sun May 10 03:55:39 2009
Subject: please help me to solve the problem
In-Reply-To: <1e31c7980905092047i3daa0695rb78f98eccbf9d884@mail.gmail.com>
References: <d2025ed50903292057p598003ck71e50fea360432c3@mail.gmail.com>
	<1e31c7980905092047i3daa0695rb78f98eccbf9d884@mail.gmail.com>
Message-ID: <1e31c7980905092048x189f084fh530ddaf1cf4b4788@mail.gmail.com>

On Mon, Mar 30, 2009 at 12:57 AM, Caleb <caleb@ms59.url.com.tw> wrote:

> hi,
>   I am a newer for FreeBSD, and I try to install KDE4.2.1, but got
> some problem, (the error cord like the attpachment), would you mind
> tell me where I and find out the solution, or how to solve them ? I
> reinstall the FreeBSD 7.1, xorg and kde4 several times, but not
> succeeded. please help. thank you very much.
> Best Regards.
> caleb
>
>
Please Caleb,

Send this file too: /usr/ports/graphics/dri/work/Mesa-7.3/config.log

Thanks,
Vinicius Abrahao
From vinnix.bsd at gmail.com  Sun May 10 04:03:09 2009
From: vinnix.bsd at gmail.com (Vinicius Abrahao)
Date: Sun May 10 04:03:15 2009
Subject: Problem when updating xorg-drivers: "xf86-input-calcomp-1.1.2_1 
	Unmaintained upstream"
Message-ID: <1e31c7980905092041y58a759e1o7f6079e61a8748a1@mail.gmail.com>

# pkg_version -vIL=
xorg-drivers-7.4_1                  <   needs updating (index has 7.4_2)

#portupgrade xorg-drivers

===>   xorg-drivers-7.4_2 depends on file:
/usr/local/lib/xorg/modules/input/calcomp_drv.so - not found
===>    Verifying reinstall for
/usr/local/lib/xorg/modules/input/calcomp_drv.so in
/usr/ports/x11-drivers/xf86-input-calcomp
===>  xf86-input-calcomp-1.1.2_1 Unmaintained upstream. Notify
x11@FreeBSD.org if you have this device..
*** Error code 1

Stop in /usr/ports/x11-drivers/xf86-input-calcomp.
*** Error code 1

Stop in /usr/ports/x11-drivers/xorg-drivers.
*** Error code 1

Stop in /usr/ports/x11-drivers/xorg-drivers.
*** Error code 1

Stop in /usr/ports/x11-drivers/xorg-drivers.
** Command failed [exit code 1]: /usr/bin/script -qa
/tmp/portupgrade20090510-63398-mmm9ti-0 env UPGRADE_TOOL=portupgrade
UPGRADE_PORT=xorg-drivers-7.4_1 UPGRADE_PORT_VER=7.4_1 make reinstall
--->  Restoring the old version
** Fix the installation problem and try again.
[Updating the pkgdb <format:bdb_btree> in /var/db/pkg ... - 829 packages
found (-0 +1) . done]
** Listing the failed packages (-:ignored / *:skipped / !:failed)
        ! x11-drivers/xorg-drivers (xorg-drivers-7.4_1) (install error)

# cd /usr/ports/x11-drivers/xf86-input-calcomp/
# make install clean
===>  xf86-input-calcomp-1.1.2_1 Unmaintained upstream. Notify
x11@FreeBSD.org if you have this device..
*** Error code 1


I don't have this device by the way. But I can't update my xorg-drivers
port. Why xorg-drivers depends on xf86-input-calcomp if this
is a "Unmaintained upstream"? And most important, how I can't fix it?

Thanks,
Vinicius Schmidt
From markir at paradise.net.nz  Mon May 11 03:51:16 2009
From: markir at paradise.net.nz (Mark Kirkwood)
Date: Mon May 11 03:51:23 2009
Subject: New DPMS behavior in 7.4
In-Reply-To: <4A022E7F.70606@halplant.com>
References: <4A015128.9080602@paradise.net.nz> <4A022E7F.70606@halplant.com>
Message-ID: <4A07A0A8.3020002@paradise.net.nz>

Andrew J. Caines wrote:
> Mark,
>
>   
>> I've recently upgraded to Xorg 7.4 and Gnome 2.26. I notice that when
>> the monitor screen in blanked that the power lamp stays green always -
>> never goes to orange (it used to with Xorg 7.3 + Gnome 2.24). Is this
>> expected?
>>     
>
> I don't know, but you can check the blanking and DPMS and times for
> Standby, Suspend and Off with "xset -q", e.g.
>
> #  xset -q
> ...
> Screen Saver:
>   prefer blanking:  yes    allow exposures:  yes
>   timeout:  600    cycle:  600
> ...
> DPMS (Energy Star):
>   Standby: 900    Suspend: 0    Off: 0
>   DPMS is Enabled
>   Monitor is On
>
> This fits with what I explicitly configure in xorg.conf.
>
> Section "ServerLayout"
>         Identifier     "X.org Configured"
>         Screen      0  "Screen0" 0 0
>         Option         "blank time" "10"
>         Option         "standby time" "15"
>         Option         "suspend time" "0"
>         Option         "off time" "0"
>         Option         "AllowEmptyInput" "off"
> EndSection
>
> Make sure you have the green_saver kernel module loaded.
>
> # kldstat | fgrep green
> 32    1 0xc614f000 2000     green_saver.ko
>
> If you don't, then add saver="green" to your rc.conf and "kldload
> green_saver".
>
>   
Thanks Andrew,

Adding similar lines into xorg.conf results in an encouraging entry in 
X11.0.log:

(**) Option "BlankTime" "10"
(**) Option "StandbyTime" "15"
(**) Option "SuspendTime" "0"
(**) Option "OffTime" "30"


However xset does not pick 'em up:

DPMS (Energy Star):
  Standby: 0    Suspend: 0    Off: 0
  DPMS is Enabled
  Monitor is On


... and sure enough, monitor light stays green, even after 30 minutes. I 
have the 'green_saver' module loaded:

$ kldstat |grep green
 7    1 0xc5cbf000 2000     green_saver.ko

Any ideas? Thanks

Mark



From A.J.Caines at halplant.com  Mon May 11 05:04:11 2009
From: A.J.Caines at halplant.com (Andrew J. Caines)
Date: Mon May 11 05:23:10 2009
Subject: New DPMS behavior in 7.4
In-Reply-To: <4A07A0A8.3020002@paradise.net.nz>
References: <4A015128.9080602@paradise.net.nz> <4A022E7F.70606@halplant.com>
	<4A07A0A8.3020002@paradise.net.nz>
Message-ID: <4A07B1C8.7040200@halplant.com>

Mark

> Adding similar lines into xorg.conf results in an encouraging entry in
> X11.0.log:
> (**) Option "BlankTime" "10"
> (**) Option "StandbyTime" "15"
> (**) Option "SuspendTime" "0"
> (**) Option "OffTime" "30"
> However xset does not pick 'em up:
> DPMS (Energy Star):
>  Standby: 0    Suspend: 0    Off: 0

Looks like something which starts after the X server is applying
different settings. That something is very likely a desktop manager -
Gnome, KDE, XFCE, etc.

If you are running one of these, then look at the settings relating to
screensavers, power settings or wherever it hides these settings.


-- 
-Andrew J. Caines-   Unix Systems Engineer   A.J.Caines@halplant.com
FreeBSD/Linux/Solaris, Web/Mail/Proxy/...   http://halplant.com:2001/
  "Machines take me by surprise with great frequency" - Alan Turing
From bugmaster at FreeBSD.org  Mon May 11 11:07:08 2009
From: bugmaster at FreeBSD.org (FreeBSD bugmaster)
Date: Mon May 11 11:09:50 2009
Subject: Current problem reports assigned to freebsd-x11@FreeBSD.org
Message-ID: <200905111107.n4BB77Ff086158@freefall.freebsd.org>

Note: to view an individual PR, use:
  http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.


S Tracker      Resp.      Description
--------------------------------------------------------------------------------
o ports/134244 x11        x11/xorg: "intel" driver for Xorg is very broken
o ports/134194 x11        graphics/dri fail on 7.2-RELEASE amd64
o ports/134132 x11        x11-servers/xorg-server: Intel i845 - xorg.conf with U
o ports/134082 x11        x11/xdriinfo: xdriinfo-1.0.2 build fail
o ports/134008 x11        [patch] x11-drivers/xf86-video-radeonhd: add glproto a
o ports/133946 x11        x11-servers/xorg-server [patch] X crashes in xinerama 
o ports/133609 x11        x11/xorg crashes with vlc, intel video driver
o ports/133482 x11        x11/libXext "Generic Event Extension not available" er
o ports/133465 x11        x11/xorg: X crashes with mplayer -vo xv with xf86-vide
o ports/133419 x11        Unable to build x11-drivers/xf86-video-nsc
o ports/133175 x11        [patch] x11/pixman: enable SSE2 support autodetection
o ports/133025 x11        [patch] graphics/libGL: mark Mesa ports as MAKE_JOBS_S
o ports/132621 x11        x11/xorg tries to install event when deselected
o ports/132403 x11        x11/xorg with Radeon X600 (R370): cannot re-initialize
o ports/132100 x11        x11/xorg: Xorg server forgets pointer map after xlock
o ports/132041 x11        x11/xorg: Broken Intel video driver
o ports/131930 x11        [PATCH] x11-servers/xorg-server coredumps on exit
o ports/131726 x11        x11-servers/xorg-server: xorg server messes with my eh
o ports/131696 x11        x11-servers/xorg-server: hald core dumps make X11 unus
o ports/131644 x11        x11-servers/xorg-server: Xinerama mouse event (focus f
f ports/131124 x11        x11/xorg - New xorg 7.4 hangs until mouse is moved whe
o ports/131016 x11        x11/xorg - xorg-7.4 renders system unusable!
f ports/126812 x11        x11-drivers/xf86-video-ati - System freeze when exitin
o ports/125883 x11        x11-fonts/xorg-fonts-cyrillic is installed, but fonts 
f ports/123137 x11        x11/libX11: missing ru_RU.UTF-8 locale
o ports/122830 x11        x11/xorg: Error in I830WaitLpRing()
f ports/119037 x11        x11: Can't type _ (Underscore) under X (gnome)
f ports/118645 x11        Xorg need realtime priority for mouse work nice
s ports/117907 x11        x11-servers/mga_hal broken on 7.0-BETA (GLIBC error)
f ports/117766 x11        x11-servers/xorg-server (7.3) crashes under heavy load
f ports/117195 x11        ix11/Xorg 7.3 dumps core at exit (sig 11)
o ports/116443 x11        x11-drivers/xf86-input-keyboard patch for USB jp106 ke

32 problems total.

From pav at FreeBSD.org  Mon May 11 15:23:55 2009
From: pav at FreeBSD.org (pav@FreeBSD.org)
Date: Mon May 11 15:24:02 2009
Subject: ports/131644: x11-servers/xorg-server: Xinerama mouse event
	(focus freeze) problem
Message-ID: <200905111523.n4BFNrLO043815@freefall.freebsd.org>

Synopsis: x11-servers/xorg-server: Xinerama mouse event (focus freeze) problem

State-Changed-From-To: open->closed
State-Changed-By: pav
State-Changed-When: Mon May 11 15:23:45 UTC 2009
State-Changed-Why: 
Already included in xorg-server-1.6.1

http://www.freebsd.org/cgi/query-pr.cgi?pr=131644
From pav at FreeBSD.org  Mon May 11 15:24:36 2009
From: pav at FreeBSD.org (pav@FreeBSD.org)
Date: Mon May 11 15:24:43 2009
Subject: ports/117195: ix11/Xorg 7.3 dumps core at exit (sig 11)
Message-ID: <200905111524.n4BFOauG043904@freefall.freebsd.org>

Synopsis: ix11/Xorg 7.3 dumps core at exit (sig 11)

State-Changed-From-To: feedback->closed
State-Changed-By: pav
State-Changed-When: Mon May 11 15:24:24 UTC 2009
State-Changed-Why: 
Feedback timeout

http://www.freebsd.org/cgi/query-pr.cgi?pr=117195
From pav at FreeBSD.org  Mon May 11 15:24:52 2009
From: pav at FreeBSD.org (pav@FreeBSD.org)
Date: Mon May 11 15:24:59 2009
Subject: ports/117766: x11-servers/xorg-server (7.3) crashes under heavy
	load
Message-ID: <200905111524.n4BFOp0N043970@freefall.freebsd.org>

Synopsis: x11-servers/xorg-server (7.3) crashes under heavy load

State-Changed-From-To: feedback->closed
State-Changed-By: pav
State-Changed-When: Mon May 11 15:24:42 UTC 2009
State-Changed-Why: 
Feedback timeout

http://www.freebsd.org/cgi/query-pr.cgi?pr=117766
From pav at FreeBSD.org  Mon May 11 15:25:08 2009
From: pav at FreeBSD.org (pav@FreeBSD.org)
Date: Mon May 11 15:25:14 2009
Subject: ports/118645: Xorg need realtime priority for mouse work nice
Message-ID: <200905111525.n4BFP7Zr044051@freefall.freebsd.org>

Synopsis: Xorg need realtime priority for mouse work nice

State-Changed-From-To: feedback->closed
State-Changed-By: pav
State-Changed-When: Mon May 11 15:24:58 UTC 2009
State-Changed-Why: 
Feedback timeout

http://www.freebsd.org/cgi/query-pr.cgi?pr=118645
From pav at FreeBSD.org  Mon May 11 15:25:22 2009
From: pav at FreeBSD.org (pav@FreeBSD.org)
Date: Mon May 11 15:25:29 2009
Subject: ports/131124: x11/xorg - New xorg 7.4 hangs until mouse is
	moved when AllowEmptyInput turned off
Message-ID: <200905111525.n4BFPLom044123@freefall.freebsd.org>

Synopsis: x11/xorg - New xorg 7.4 hangs until mouse is moved when AllowEmptyInput turned off

State-Changed-From-To: feedback->closed
State-Changed-By: pav
State-Changed-When: Mon May 11 15:25:13 UTC 2009
State-Changed-Why: 
Feedback timeout

http://www.freebsd.org/cgi/query-pr.cgi?pr=131124
From curtis at occnc.com  Tue May 12 06:55:09 2009
From: curtis at occnc.com (Curtis Villamizar)
Date: Tue May 12 06:55:18 2009
Subject: 0000:f826: 00 ILLEGAL EXTENDED X86 OPCODE
Message-ID: <200905120623.n4C6Nlio022939@harbor.orleans.occnc.com>

I have a HP Mini Laptop with VIA graphics card.  It was briefly
running FreeBSD 6.2 with Xorg port xorg-7.2 that I copied to flash
from another machine (an 11 year old laptop that is dying).  It was
using the vesa driver but would work best with 1024x768 and not at all
with its native resolution of 1280x768.  It came with Linux SLED works
fine and its set up for dual boot (I've tried moving parts for that
xorg.cof but no luck - it uses the via driver and xorg 6.9).

I'm now running FreeBSD 7.2 with xorg-7.4_2 and X no longer works.  I
just upgraded the x11-* ports after some changes this weekend and no
luck.  It is now using the openchrome driver, but vesa fails too.

I tried to force it to native resolution and to the resolution that
previously worked.  I've also tried shutting things off like PM,
AIGLX, GlxVisuals, MTRR.  I've commented out load module lines and
tried both vesa and openchrome.  No real improvement.

Some relevant files attached.

The screen clears once or twice and then goes blank with a blinking
cursor.  Sometime Ctl-Alt-F2 gets be back to a virtual console.  While
experimenting I run Xorg from the backdoor (slogin over the ethernet)
so I still have access and cortrol.  I can SIGQUIT and get a core dump
but I don't know that it would help.

Can anyone shed any light on this or suggest where to look next?
Is there anything else I could provide in the way of information?
Is there a reason why the via driver was abandoned in favor of
openchrome?

Curtis


-------------- next part --------------

flash# Xorg

X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.2-STABLE i386 
Current Operating System: FreeBSD flash.brookfield.occnc.com
7.2-STABLE FreeBSD 7.2-STABLE #0: Fri May  8 01:46:52 PDT 2009
root@flash.brookfield.occnc.com:/usr/src/RELENG_7/obj/usr/src/RELENG_7/src/sys/GENERIC
i386
Build Date: 09 May 2009  07:12:17PM
 
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May 11 20:03:06 2009
(==) Using config file: "/etc/X11/xorg.conf"
0000:f826: 00 ILLEGAL EXTENDED X86 OPCODE!

-------------- next part --------------

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	Option		"DontZap" "False"
	Option		"NoPM" "true"
	Option		"AIGLX" "false"
	Option		"GlxVisuals" "false"
EndSection

Section "Files"
	ModulePath   "/usr/local/lib/xorg/modules"
	FontPath     "/usr/local/lib/X11/fonts/misc/"
	FontPath     "/usr/local/lib/X11/fonts/TTF/"
	FontPath     "/usr/local/lib/X11/fonts/OTF"
	FontPath     "/usr/local/lib/X11/fonts/Type1/"
	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
	Load  "extmod"
	Load  "record"
	Load  "dbe"
	Load  "glx"
	Load  "dri"
	Load  "dri2"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/sysmouse"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
	Option		"DPMS" "false"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "DefaultRefresh"     	# [<bool>]
        #Option     "ModeSetClearScreen" 	# [<bool>]
	Identifier  "Card0"
	Driver      "vesa"
	VendorName  "Unknown Vendor"
	BoardName   "Unknown Board"
	BusID       "PCI:1:0:0"
#	Identifier  "Card0"
#	Driver      "openchrome"
#	VendorName  "VIA Technologies, Inc."
#	BoardName   "CN896/VN896/P4M900 [Chrome 9 HC]"
#	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	Option     "NoMTRR" "True"
	SubSection "Display"
		Virtual   1024 768
		Modes	"1024x768"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Virtual   1024 768
		Modes	"1024x768"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Virtual   1024 768
		Modes	"1024x768"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Virtual   1024 768
		Modes	"1024x768"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Virtual   1024 768
		Modes	"1024x768"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Virtual   1024 768
		Modes	"1024x768"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

-------------- next part --------------


X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.2-STABLE i386 
Current Operating System: FreeBSD flash.brookfield.occnc.com 7.2-STABLE FreeBSD 7.2-STABLE #0: Fri May  8 01:46:52 PDT 2009     root@flash.brookfield.occnc.com:/usr/src/RELENG_7/obj/usr/src/RELENG_7/src/sys/GENERIC i386
Build Date: 09 May 2009  07:12:17PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May 11 20:56:37 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "False"
(**) Option "NoPM" "true"
(**) Option "AIGLX" "false"
(**) Option "GlxVisuals" "false"
(==) Not automatically adding devices
(==) Not automatically enabling devices
(WW) Unknown GlxVisuals option
(**) FontPath set to:
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	built-ins
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(II) Loader magic: 0x6a0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 5

(--) PCI:*(0@1:0:0) VIA Technologies, Inc. CN896/VN896/P4M900 [Chrome 9 HC] rev 1, Mem @ 0xd0000000/134217728, 0xfc000000/16777216, BIOS @ 0x????????/65536
(II) System resource ranges:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(**) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "vesa"
(II) Loading /usr/local/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 2.1.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.4.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.3.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after probing:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/local/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): VESA VBE Version 3.0
(II) VESA(0): VESA VBE Total Mem: 32768 kB
(II) VESA(0): VESA VBE OEM: VIA N3364

(II) VESA(0): VESA VBE OEM Software Rev: 1.0
(II) VESA(0): VESA VBE OEM Vendor: 
(II) VESA(0): VESA VBE OEM Product: 
(II) VESA(0): VESA VBE OEM Product Rev: 
(==) VESA(0): Depth 24, (--) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): VESA VBE DDC Level 2
(II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
(II) VESA(0): VESA VBE DDC read failed
(II) VESA(0): Searching for matching VESA mode(s):
Mode: 101 (640x480)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 640
	XResolution: 640
	YResolution: 480
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 101
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 640
	BnkNumberOfImagePages: 101
	LinNumberOfImagePages: 101
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 111 (640x480)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1280
	XResolution: 640
	YResolution: 480
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 50
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1280
	BnkNumberOfImagePages: 50
	LinNumberOfImagePages: 50
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 112 (640x480)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 2560
	XResolution: 640
	YResolution: 480
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 25
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 2560
	BnkNumberOfImagePages: 25
	LinNumberOfImagePages: 25
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 171 (720x480)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 736
	XResolution: 720
	YResolution: 480
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 84
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 736
	BnkNumberOfImagePages: 84
	LinNumberOfImagePages: 84
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 173 (720x480)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1440
	XResolution: 720
	YResolution: 480
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 45
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1440
	BnkNumberOfImagePages: 45
	LinNumberOfImagePages: 45
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 175 (720x480)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 2880
	XResolution: 720
	YResolution: 480
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 22
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 2880
	BnkNumberOfImagePages: 22
	LinNumberOfImagePages: 22
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 1b9 (720x540)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 736
	XResolution: 720
	YResolution: 540
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 72
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 736
	BnkNumberOfImagePages: 72
	LinNumberOfImagePages: 72
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 1ba (720x540)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1440
	XResolution: 720
	YResolution: 540
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 41
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1440
	BnkNumberOfImagePages: 41
	LinNumberOfImagePages: 41
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 1bb (720x540)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 2880
	XResolution: 720
	YResolution: 540
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 20
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 2880
	BnkNumberOfImagePages: 20
	LinNumberOfImagePages: 20
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 17c (720x576)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 736
	XResolution: 720
	YResolution: 576
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 72
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 736
	BnkNumberOfImagePages: 72
	LinNumberOfImagePages: 72
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 17e (720x576)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1440
	XResolution: 720
	YResolution: 576
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 38
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1440
	BnkNumberOfImagePages: 38
	LinNumberOfImagePages: 38
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 17f (720x576)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 2880
	XResolution: 720
	YResolution: 576
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 18
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 2880
	BnkNumberOfImagePages: 18
	LinNumberOfImagePages: 18
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 22e (800x480)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 800
	XResolution: 800
	YResolution: 480
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 84
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 800
	BnkNumberOfImagePages: 84
	LinNumberOfImagePages: 84
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 22f (800x480)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1600
	XResolution: 800
	YResolution: 480
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 41
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1600
	BnkNumberOfImagePages: 41
	LinNumberOfImagePages: 41
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 230 (800x480)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 3200
	XResolution: 800
	YResolution: 480
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 20
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 3200
	BnkNumberOfImagePages: 20
	LinNumberOfImagePages: 20
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 103 (800x600)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 800
	XResolution: 800
	YResolution: 600
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 63
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 800
	BnkNumberOfImagePages: 63
	LinNumberOfImagePages: 63
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 114 (800x600)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1600
	XResolution: 800
	YResolution: 600
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 33
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1600
	BnkNumberOfImagePages: 33
	LinNumberOfImagePages: 33
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 115 (800x600)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 3200
	XResolution: 800
	YResolution: 600
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 16
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 3200
	BnkNumberOfImagePages: 16
	LinNumberOfImagePages: 16
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 222 (852x480)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 864
	XResolution: 852
	YResolution: 480
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 72
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 864
	BnkNumberOfImagePages: 72
	LinNumberOfImagePages: 72
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 223 (852x480)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1728
	XResolution: 852
	YResolution: 480
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 38
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1728
	BnkNumberOfImagePages: 38
	LinNumberOfImagePages: 38
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 224 (852x480)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 3424
	XResolution: 852
	YResolution: 480
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 18
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 3424
	BnkNumberOfImagePages: 18
	LinNumberOfImagePages: 18
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 200 (1024x600)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1024
	XResolution: 1024
	YResolution: 600
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 50
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1024
	BnkNumberOfImagePages: 50
	LinNumberOfImagePages: 50
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 201 (1024x600)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 2048
	XResolution: 1024
	YResolution: 600
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 25
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 2048
	BnkNumberOfImagePages: 25
	LinNumberOfImagePages: 25
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 203 (1024x600)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 4096
	XResolution: 1024
	YResolution: 600
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 12
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 4096
	BnkNumberOfImagePages: 12
	LinNumberOfImagePages: 12
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 105 (1024x768)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1024
	XResolution: 1024
	YResolution: 768
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 41
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1024
	BnkNumberOfImagePages: 41
	LinNumberOfImagePages: 41
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 117 (1024x768)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 2048
	XResolution: 1024
	YResolution: 768
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 20
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 2048
	BnkNumberOfImagePages: 20
	LinNumberOfImagePages: 20
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 118 (1024x768)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 4096
	XResolution: 1024
	YResolution: 768
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 9
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 4096
	BnkNumberOfImagePages: 9
	LinNumberOfImagePages: 9
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 125 (1280x720)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1280
	XResolution: 1280
	YResolution: 720
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 33
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1280
	BnkNumberOfImagePages: 33
	LinNumberOfImagePages: 33
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 126 (1280x720)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 2560
	XResolution: 1280
	YResolution: 720
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 16
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 2560
	BnkNumberOfImagePages: 16
	LinNumberOfImagePages: 16
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 127 (1280x720)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 5120
	XResolution: 1280
	YResolution: 720
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 7
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 5120
	BnkNumberOfImagePages: 7
	LinNumberOfImagePages: 7
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
(II) VESA(0): Not using mode "1280x720" (width too large for virtual size)
Mode: 179 (1280x768)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1280
	XResolution: 1280
	YResolution: 768
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 33
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1280
	BnkNumberOfImagePages: 33
	LinNumberOfImagePages: 33
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 17a (1280x768)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 2560
	XResolution: 1280
	YResolution: 768
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 16
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 2560
	BnkNumberOfImagePages: 16
	LinNumberOfImagePages: 16
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 17b (1280x768)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 5120
	XResolution: 1280
	YResolution: 768
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 7
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 5120
	BnkNumberOfImagePages: 7
	LinNumberOfImagePages: 7
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
(II) VESA(0): Not using mode "1280x768" (width too large for virtual size)
Mode: 1b6 (1280x800)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1280
	XResolution: 1280
	YResolution: 800
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 31
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1280
	BnkNumberOfImagePages: 31
	LinNumberOfImagePages: 31
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 1b7 (1280x800)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 2560
	XResolution: 1280
	YResolution: 800
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 15
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 2560
	BnkNumberOfImagePages: 15
	LinNumberOfImagePages: 15
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 1b8 (1280x800)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 5120
	XResolution: 1280
	YResolution: 800
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 7
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 5120
	BnkNumberOfImagePages: 7
	LinNumberOfImagePages: 7
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
(II) VESA(0): Not using mode "1280x800" (height too large for virtual size)
Mode: 13f (1280x960)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1280
	XResolution: 1280
	YResolution: 960
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 25
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1280
	BnkNumberOfImagePages: 25
	LinNumberOfImagePages: 25
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 14f (1280x960)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 2560
	XResolution: 1280
	YResolution: 960
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 12
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 2560
	BnkNumberOfImagePages: 12
	LinNumberOfImagePages: 12
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 16a (1280x960)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 5120
	XResolution: 1280
	YResolution: 960
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 5
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 5120
	BnkNumberOfImagePages: 5
	LinNumberOfImagePages: 5
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
(II) VESA(0): Not using mode "1280x960" (height too large for virtual size)
Mode: 107 (1280x1024)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1280
	XResolution: 1280
	YResolution: 1024
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 24
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1280
	BnkNumberOfImagePages: 24
	LinNumberOfImagePages: 24
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 11a (1280x1024)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 2560
	XResolution: 1280
	YResolution: 1024
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 11
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 2560
	BnkNumberOfImagePages: 11
	LinNumberOfImagePages: 11
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 11b (1280x1024)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 5120
	XResolution: 1280
	YResolution: 1024
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 5
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 5120
	BnkNumberOfImagePages: 5
	LinNumberOfImagePages: 5
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
(II) VESA(0): Not using mode "1280x1024" (height too large for virtual size)
Mode: 183 (1366x768)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1376
	XResolution: 1366
	YResolution: 768
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 29
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1376
	BnkNumberOfImagePages: 29
	LinNumberOfImagePages: 29
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 184 (1366x768)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 2752
	XResolution: 1366
	YResolution: 768
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 14
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 2752
	BnkNumberOfImagePages: 14
	LinNumberOfImagePages: 14
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 185 (1366x768)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 5472
	XResolution: 1366
	YResolution: 768
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 6
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 5472
	BnkNumberOfImagePages: 6
	LinNumberOfImagePages: 6
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
(II) VESA(0): Not using mode "1366x768" (width too large for virtual size)
Mode: 13b (1400x1050)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1408
	XResolution: 1400
	YResolution: 1050
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 21
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1408
	BnkNumberOfImagePages: 21
	LinNumberOfImagePages: 21
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 13c (1400x1050)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 2816
	XResolution: 1400
	YResolution: 1050
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 10
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 2816
	BnkNumberOfImagePages: 10
	LinNumberOfImagePages: 10
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 13e (1400x1050)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 5600
	XResolution: 1400
	YResolution: 1050
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 4
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 5600
	BnkNumberOfImagePages: 4
	LinNumberOfImagePages: 4
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
(II) VESA(0): Not using mode "1400x1050" (height too large for virtual size)
Mode: 211 (1440x900)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1440
	XResolution: 1440
	YResolution: 900
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 24
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1440
	BnkNumberOfImagePages: 24
	LinNumberOfImagePages: 24
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 212 (1440x900)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 2880
	XResolution: 1440
	YResolution: 900
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 11
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 2880
	BnkNumberOfImagePages: 11
	LinNumberOfImagePages: 11
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 213 (1440x900)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 5760
	XResolution: 1440
	YResolution: 900
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 5
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 5760
	BnkNumberOfImagePages: 5
	LinNumberOfImagePages: 5
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
(II) VESA(0): Not using mode "1440x900" (height too large for virtual size)
Mode: 120 (1600x1200)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1600
	XResolution: 1600
	YResolution: 1200
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 16
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1600
	BnkNumberOfImagePages: 16
	LinNumberOfImagePages: 16
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 122 (1600x1200)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 3200
	XResolution: 1600
	YResolution: 1200
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 7
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 3200
	BnkNumberOfImagePages: 7
	LinNumberOfImagePages: 7
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 124 (1600x1200)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 6400
	XResolution: 1600
	YResolution: 1200
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 3
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 6400
	BnkNumberOfImagePages: 3
	LinNumberOfImagePages: 3
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
(II) VESA(0): Not using mode "1600x1200" (height too large for virtual size)
Mode: 12b (1680x1050)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1696
	XResolution: 1680
	YResolution: 1050
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 17
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1696
	BnkNumberOfImagePages: 17
	LinNumberOfImagePages: 17
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 12c (1680x1050)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 3360
	XResolution: 1680
	YResolution: 1050
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 8
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 3360
	BnkNumberOfImagePages: 8
	LinNumberOfImagePages: 8
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 12d (1680x1050)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 6720
	XResolution: 1680
	YResolution: 1050
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 3
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 6720
	BnkNumberOfImagePages: 3
	LinNumberOfImagePages: 3
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
(II) VESA(0): Not using mode "1680x1050" (height too large for virtual size)
Mode: 166 (1920x1080)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1920
	XResolution: 1920
	YResolution: 1080
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 15
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1920
	BnkNumberOfImagePages: 15
	LinNumberOfImagePages: 15
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 167 (1920x1080)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 3840
	XResolution: 1920
	YResolution: 1080
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 7
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 3840
	BnkNumberOfImagePages: 7
	LinNumberOfImagePages: 7
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 168 (1920x1080)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 7680
	XResolution: 1920
	YResolution: 1080
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 3
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 7680
	BnkNumberOfImagePages: 3
	LinNumberOfImagePages: 3
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
(II) VESA(0): Not using mode "1920x1080" (height too large for virtual size)
Mode: 146 (1920x1200)
	ModeAttributes: 0x9f
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 1920
	XResolution: 1920
	YResolution: 1200
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 8
	NumberOfBanks: 1
	MemoryModel: 4
	BankSize: 0
	NumberOfImages: 13
	RedMaskSize: 0
	RedFieldPosition: 0
	GreenMaskSize: 0
	GreenFieldPosition: 0
	BlueMaskSize: 0
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 1920
	BnkNumberOfImagePages: 13
	LinNumberOfImagePages: 13
	LinRedMaskSize: 0
	LinRedFieldPosition: 0
	LinGreenMaskSize: 0
	LinGreenFieldPosition: 0
	LinBlueMaskSize: 0
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
Mode: 148 (1920x1200)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 3840
	XResolution: 1920
	YResolution: 1200
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 16
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 6
	RedMaskSize: 5
	RedFieldPosition: 11
	GreenMaskSize: 6
	GreenFieldPosition: 5
	BlueMaskSize: 5
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 3840
	BnkNumberOfImagePages: 6
	LinNumberOfImagePages: 6
	LinRedMaskSize: 5
	LinRedFieldPosition: 11
	LinGreenMaskSize: 6
	LinGreenFieldPosition: 5
	LinBlueMaskSize: 5
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
*Mode: 149 (1920x1200)
	ModeAttributes: 0x9b
	WinAAttributes: 0x7
	WinBAttributes: 0x0
	WinGranularity: 64
	WinSize: 64
	WinASegment: 0xa000
	WinBSegment: 0xa000
	WinFuncPtr: 0xc00080c7
	BytesPerScanline: 7680
	XResolution: 1920
	YResolution: 1200
	XCharSize: 8
	YCharSize: 16
	NumberOfPlanes: 1
	BitsPerPixel: 32
	NumberOfBanks: 1
	MemoryModel: 6
	BankSize: 0
	NumberOfImages: 2
	RedMaskSize: 8
	RedFieldPosition: 16
	GreenMaskSize: 8
	GreenFieldPosition: 8
	BlueMaskSize: 8
	BlueFieldPosition: 0
	RsvdMaskSize: 0
	RsvdFieldPosition: 0
	DirectColorModeInfo: 2
	PhysBasePtr: 0xd0000000
	LinBytesPerScanLine: 7680
	BnkNumberOfImagePages: 2
	LinNumberOfImagePages: 2
	LinRedMaskSize: 8
	LinRedFieldPosition: 16
	LinGreenMaskSize: 8
	LinGreenFieldPosition: 8
	LinBlueMaskSize: 8
	LinBlueFieldPosition: 0
	LinRsvdMaskSize: 0
	LinRsvdFieldPosition: 0
	MaxPixelClock: 0
(II) VESA(0): Not using mode "1920x1200" (height too large for virtual size)

(II) VESA(0): Total Memory: 512 64KB banks (32768kB)
(II) VESA(0): Monitor0: Using default hsync range of 31.50-37.90 kHz
(II) VESA(0): Monitor0: Using default vrefresh range of 50.00-70.00 Hz
(II) VESA(0): Not using built-in mode "1024x768" (no mode of this name)
(II) VESA(0): Not using built-in mode "1024x600" (no mode of this name)
(II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
(II) VESA(0): Not using built-in mode "720x576" (no mode of this name)
(II) VESA(0): Not using built-in mode "852x480" (no mode of this name)
(II) VESA(0): Not using built-in mode "720x540" (no mode of this name)
(II) VESA(0): Not using built-in mode "800x480" (no mode of this name)
(II) VESA(0): Not using built-in mode "720x480" (no mode of this name)
(II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
(WW) VESA(0): No valid modes left.  Trying less strict filter...
(II) VESA(0): Monitor0: Using hsync range of 31.50-37.90 kHz
(II) VESA(0): Monitor0: Using vrefresh range of 50.00-70.00 Hz
(II) VESA(0): Not using built-in mode "1024x768" (hsync out of range)
(**) VESA(0): Virtual size is 1024x768 (pitch 1024)
(**) VESA(0):  Built-in mode "1024x600"
(**) VESA(0):  Built-in mode "800x600"
(**) VESA(0):  Built-in mode "720x576"
(**) VESA(0):  Built-in mode "852x480"
(**) VESA(0):  Built-in mode "720x540"
(**) VESA(0):  Built-in mode "800x480"
(**) VESA(0):  Built-in mode "720x480"
(**) VESA(0):  Built-in mode "640x480"
(==) VESA(0): DPI set to (96, 96)
(II) VESA(0): Attempting to use 60Hz refresh for mode "800x600" (115)
(**) VESA(0): Option "Nomtrr" "True"
(II) VESA(0): Attempting to use 60Hz refresh for mode "640x480" (112)
From rnoland at FreeBSD.org  Tue May 12 15:20:49 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Tue May 12 15:20:55 2009
Subject: Problem when updating xorg-drivers:
 "xf86-input-calcomp-1.1.2_1 Unmaintained upstream"
In-Reply-To: <1e31c7980905092041y58a759e1o7f6079e61a8748a1@mail.gmail.com>
References: <1e31c7980905092041y58a759e1o7f6079e61a8748a1@mail.gmail.com>
Message-ID: <1242141616.1755.13.camel@balrog.2hip.net>

On Sun, 2009-05-10 at 00:41 -0300, Vinicius Abrahao wrote:
> # pkg_version -vIL=
> xorg-drivers-7.4_1                  <   needs updating (index has 7.4_2)
> 
> #portupgrade xorg-drivers
> 
> ===>   xorg-drivers-7.4_2 depends on file:
> /usr/local/lib/xorg/modules/input/calcomp_drv.so - not found
> ===>    Verifying reinstall for
> /usr/local/lib/xorg/modules/input/calcomp_drv.so in
> /usr/ports/x11-drivers/xf86-input-calcomp
> ===>  xf86-input-calcomp-1.1.2_1 Unmaintained upstream. Notify
> x11@FreeBSD.org if you have this device..
> *** Error code 1
> 
> Stop in /usr/ports/x11-drivers/xf86-input-calcomp.
> *** Error code 1
> 
> Stop in /usr/ports/x11-drivers/xorg-drivers.
> *** Error code 1
> 
> Stop in /usr/ports/x11-drivers/xorg-drivers.
> *** Error code 1
> 
> Stop in /usr/ports/x11-drivers/xorg-drivers.
> ** Command failed [exit code 1]: /usr/bin/script -qa
> /tmp/portupgrade20090510-63398-mmm9ti-0 env UPGRADE_TOOL=portupgrade
> UPGRADE_PORT=xorg-drivers-7.4_1 UPGRADE_PORT_VER=7.4_1 make reinstall
> --->  Restoring the old version
> ** Fix the installation problem and try again.
> [Updating the pkgdb <format:bdb_btree> in /var/db/pkg ... - 829 packages
> found (-0 +1) . done]
> ** Listing the failed packages (-:ignored / *:skipped / !:failed)
>         ! x11-drivers/xorg-drivers (xorg-drivers-7.4_1) (install error)
> 
> # cd /usr/ports/x11-drivers/xf86-input-calcomp/
> # make install clean
> ===>  xf86-input-calcomp-1.1.2_1 Unmaintained upstream. Notify
> x11@FreeBSD.org if you have this device..
> *** Error code 1
> 
> 
> I don't have this device by the way. But I can't update my xorg-drivers
> port. Why xorg-drivers depends on xf86-input-calcomp if this
> is a "Unmaintained upstream"? And most important, how I can't fix it?

It looks like you have an old option set which depends on it... Do a
make config in x11-drivers/xorg-drivers and unselect drivers which you
don't need.

robert.

> Thanks,
> Vinicius Schmidt
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090512/6d5b12b6/attachment.pgp
From jimmiejaz at gmail.com  Wed May 13 17:02:14 2009
From: jimmiejaz at gmail.com (Jimmie James)
Date: Wed May 13 17:02:21 2009
Subject: Repeatable X lockups
Message-ID: <4A0AFD10.5020402@gmail.com>

Jimmie James wrote:
>> When using the xv output driver for vlc or mplayer, X will lockup, crash 
>> instantly, trashing the screen and forcing a reboot
>> Image of screen corruption: 
>> http://img.photobucket.com/albums/v287/jimmiejaz/xcrash.jpg

William Bulley wrote:
>I have experienced the same problem, but I didn't see any suggestions
>or answers to your posting.  Have you had any success yet with this?
>Have you tried any other output drivers?  This is something I plan to
>try in the next few days.

>My system is i386 with Intel 915 graphics on the motherboard.  Xorg 7.4
>runs fine.  When I run mplayer from the command line, in an xterm under
>open-motif, the X Windows session dies and I am tossed back to the vty.



Halp?  The x11 output driver sucks when trying to watch something full 
screen.

With the latest (in ports) xf86-video-intel-2.7.1, first time with xv it 
was fine, flipped to a console then back to X, and ran mplayer with xv, 
lockup/Xcrash,
ssh'd into my box, and for the hell of it, ran startx, and it worked, I 
was back in X, but the console was still buggered as the picture in the 
link above shows.
I could kill X, but the console was buggered, locked, ssh would allow me 
to restart X as many times as I wished.

All that's in /var/log/messages is  May 13 11:19:35 jimmiejaz kernel: 
pid 65663 (Xorg), uid 0: exited on signal 6
Unfortunatly, Xorg log doesn't have anything, as I restarted X over ssh 
several times, the only thing there, is when trying to startx a lot of 
times, the first attempt can't find any screens with a usable 
configuration, ^c then startx again works just fine.

(WW) intel(0): drmDropMaster failed: Unknown error: -1
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xc5819000 at 0x2884f000
(II) intel(0): [drm] Closed DRM master.



xrandr
Screen 0: minimum 320 x 200, current 1600 x 1200, maximum 1600 x 1600
VGA connected 1600x1200+0+0 (normal left inverted right x axis y axis) 
306mm x 230mm
    1600x1200      65.0*

vgapci0@pci0:0:2:0:     class=0x030000 card=0x25821043 chip=0x25828086 
rev=0x04 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82915G/GV/GL, 82910GL Integrated Graphics Device'
     class      = display
     subclass   = VGA

grep vga /var/run/dmesg.boot
vgapci0: <VGA-compatible display> port 0x6800-0x6807 mem 
0xcfd80000-0xcfdfffff,0xd0000000-0xdfffffff,0xcfe80000-0xcfebffff at 
device 2.0 on pci0
agp0: <Intel 82915G (915G GMCH) SVGA controller> on vgapci0
drm0: <Intel i915G> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
vgapci1: <VGA-compatible display> mem 0xcfe00000-0xcfe7ffff at device 
2.1 on pci0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vgapci0: <VGA-compatible display> port 0x6800-0x6807 mem 
0xcfd80000-0xcfdfffff,0xd0000000-0xdfffffff,0xcfe80000-0xcfebffff at 
device 2.0 on pci0
agp0: <Intel 82915G (915G GMCH) SVGA controller> on vgapci0
drm0: <Intel i915G> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
vgapci1: <VGA-compatible display> mem 0xcfe00000-0xcfe7ffff at device 
2.1 on pci0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0



-- 
Over the years I've come to regard you as people I've met.

From oliver at FreeBSD.org  Wed May 13 18:31:31 2009
From: oliver at FreeBSD.org (Oliver Lehmann)
Date: Wed May 13 18:31:46 2009
Subject: Problem with OpenGL and ATI HD3850
In-Reply-To: <20090430173416.042e03a8.oliver@FreeBSD.org>
References: <20090429164113.f0b48048.lehmann@ans-netz.de>
	<20090429163843.GB370@slackbox.xs4all.nl>
	<18936.36210.823588.838523@gromit.timing.com>
	<20090430063454.969303d0.lehmann@ans-netz.de>
	<1241092672.3294.6.camel@localhost>
	<20090430122155.6643.qmail@avocado.salatschuessel.net>
	<18937.44531.88172.177326@gromit.timing.com>
	<20090430173416.042e03a8.oliver@FreeBSD.org>
Message-ID: <20090513203129.fb21a669.oliver@FreeBSD.org>

Oliver Lehmann wrote:

> A guy in the ogre forum told me that Ogre cannot be run with a Software 
> Rasterizer - that might be the case but I still wonder why glGetString
> isn't returning anything....

Ok,

I found out, that the glContext is getting somehow created wrong.
It is created with

glxContext = glXCreateContextWithConfigSGIX(mGLDisplay, fbConfig,
renderType, shareList, direct);

having direct alwasy be True and renderType GLX_RGBA_TYPE.
Changing direct to False it gets a bit further and glGetString returns
the requested information. (Then it still crashes with some framebuffer
related message which I haven't looked at yet).

Can someone explain to me what the last parameter of
glXCreateContextWithConfigSGIX is for and why True is not working here?
glxContext is not NULL when True was specified.

-- 
 Oliver Lehmann
  http://www.pofo.de/
  http://wishlist.ans-netz.de/
From onemda at gmail.com  Wed May 13 19:01:47 2009
From: onemda at gmail.com (Paul B. Mahol)
Date: Wed May 13 19:01:53 2009
Subject: Repeatable X lockups
In-Reply-To: <4A0AFD10.5020402@gmail.com>
References: <4A0AFD10.5020402@gmail.com>
Message-ID: <3a142e750905131201u40a0bf62of627649efed0535@mail.gmail.com>

On 5/13/09, Jimmie James <jimmiejaz@gmail.com> wrote:
> Jimmie James wrote:
>>> When using the xv output driver for vlc or mplayer, X will lockup, crash
>>> instantly, trashing the screen and forcing a reboot
>>> Image of screen corruption:
>>> http://img.photobucket.com/albums/v287/jimmiejaz/xcrash.jpg
>
> William Bulley wrote:
>>I have experienced the same problem, but I didn't see any suggestions
>>or answers to your posting.  Have you had any success yet with this?
>>Have you tried any other output drivers?  This is something I plan to
>>try in the next few days.
>
>>My system is i386 with Intel 915 graphics on the motherboard.  Xorg 7.4
>>runs fine.  When I run mplayer from the command line, in an xterm under
>>open-motif, the X Windows session dies and I am tossed back to the vty.
>
>
>
> Halp?  The x11 output driver sucks when trying to watch something full
> screen.
>
> With the latest (in ports) xf86-video-intel-2.7.1, first time with xv it
> was fine, flipped to a console then back to X, and ran mplayer with xv,
> lockup/Xcrash,
> ssh'd into my box, and for the hell of it, ran startx, and it worked, I
> was back in X, but the console was still buggered as the picture in the
> link above shows.
> I could kill X, but the console was buggered, locked, ssh would allow me
> to restart X as many times as I wished.

One thing to note, I dont switch to console while DRI is active
otherwise panic could happen(last time when I tested it with 915GM).

> All that's in /var/log/messages is  May 13 11:19:35 jimmiejaz kernel:
> pid 65663 (Xorg), uid 0: exited on signal 6
> Unfortunatly, Xorg log doesn't have anything, as I restarted X over ssh
> several times, the only thing there, is when trying to startx a lot of
> times, the first attempt can't find any screens with a usable
> configuration, ^c then startx again works just fine.
>
> (WW) intel(0): drmDropMaster failed: Unknown error: -1
> (II) intel(0): [drm] removed 1 reserved context for kernel
> (II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xc5819000 at 0x2884f000
> (II) intel(0): [drm] Closed DRM master.

>
>
> xrandr
> Screen 0: minimum 320 x 200, current 1600 x 1200, maximum 1600 x 1600
> VGA connected 1600x1200+0+0 (normal left inverted right x axis y axis)
> 306mm x 230mm
>     1600x1200      65.0*
>
> vgapci0@pci0:0:2:0:     class=0x030000 card=0x25821043 chip=0x25828086
> rev=0x04 hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = '82915G/GV/GL, 82910GL Integrated Graphics Device'
>      class      = display
>      subclass   = VGA
>
> grep vga /var/run/dmesg.boot
> vgapci0: <VGA-compatible display> port 0x6800-0x6807 mem
> 0xcfd80000-0xcfdfffff,0xd0000000-0xdfffffff,0xcfe80000-0xcfebffff at
> device 2.0 on pci0
> agp0: <Intel 82915G (915G GMCH) SVGA controller> on vgapci0
> drm0: <Intel i915G> on vgapci0
> vgapci0: child drm0 requested pci_enable_busmaster
> vgapci1: <VGA-compatible display> mem 0xcfe00000-0xcfe7ffff at device
> 2.1 on pci0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> vgapci0: <VGA-compatible display> port 0x6800-0x6807 mem
> 0xcfd80000-0xcfdfffff,0xd0000000-0xdfffffff,0xcfe80000-0xcfebffff at
> device 2.0 on pci0
> agp0: <Intel 82915G (915G GMCH) SVGA controller> on vgapci0
> drm0: <Intel i915G> on vgapci0
> vgapci0: child drm0 requested pci_enable_busmaster
> vgapci1: <VGA-compatible display> mem 0xcfe00000-0xcfe7ffff at device
> 2.1 on pci0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>
>
>
> --
> Over the years I've come to regard you as people I've met.
>
> _______________________________________________
> freebsd-multimedia@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
> To unsubscribe, send any mail to
> "freebsd-multimedia-unsubscribe@freebsd.org"
>

That is same corrupted screen output I was experiencing with older server and
mesa. And only when zapping Xorg.

Somehow small change somewhere "fixed" that problem for me, actually
everything points to some timeing issue.

It's hard to say if this is FreeBSD DRM issue or X11(mesa or server) problem.

I could put console into somehow not perfect but still usable conditon
if I started X11 again using vesa driver.

-- 
Paul
From bsam at FreeBSD.org  Thu May 14 05:47:25 2009
From: bsam at FreeBSD.org (bsam@FreeBSD.org)
Date: Thu May 14 05:47:32 2009
Subject: ports/134008: [patch] x11-drivers/xf86-video-radeonhd: add
	glproto as a build dependency to enable DRI support at compile time
Message-ID: <200905140547.n4E5lOc8081338@freefall.freebsd.org>

Synopsis: [patch] x11-drivers/xf86-video-radeonhd: add glproto as a build dependency to enable DRI support at compile time

State-Changed-From-To: open->closed
State-Changed-By: bsam
State-Changed-When: Thu May 14 05:47:13 UTC 2009
State-Changed-Why: 
Committed, thanks! ;-)

http://www.freebsd.org/cgi/query-pr.cgi?pr=134008
From dfilter at FreeBSD.ORG  Thu May 14 05:50:04 2009
From: dfilter at FreeBSD.ORG (dfilter service)
Date: Thu May 14 05:50:15 2009
Subject: ports/134008: commit references a PR
Message-ID: <200905140550.n4E5o3Vq081430@freefall.freebsd.org>

The following reply was made to PR ports/134008; it has been noted by GNATS.

From: dfilter@FreeBSD.ORG (dfilter service)
To: bug-followup@FreeBSD.org
Cc:  
Subject: Re: ports/134008: commit references a PR
Date: Thu, 14 May 2009 05:40:56 +0000 (UTC)

 bsam        2009-05-14 05:40:45 UTC
 
   FreeBSD ports repository
 
   Modified files:
     x11-drivers/xf86-video-radeonhd Makefile 
   Log:
   . add glproto as a dependency, so packages are got compiled without DRI support;
   . bump PORTREVISION.
   
   PR:             ports/134008
   Submitted by:   bsam (me)
   Approved by:    x11@ (maintainer timeout, 19 days)
   
   Revision  Changes    Path
   1.13      +2 -2      ports/x11-drivers/xf86-video-radeonhd/Makefile
 _______________________________________________
 cvs-all@freebsd.org mailing list
 http://lists.freebsd.org/mailman/listinfo/cvs-all
 To unsubscribe, send any mail to "cvs-all-unsubscribe@freebsd.org"
 
From g.veniamin at googlemail.com  Thu May 14 08:07:38 2009
From: g.veniamin at googlemail.com (zloidemon)
Date: Thu May 14 08:07:47 2009
Subject: xorg-server stop(with using anti-aliasing fonts)
Message-ID: <4A0BCB4C.70408@gmail.com>

Hello,

when anti-aliasing fonts the X server is apply. X server stop! this 
problem apperead after deleted xf86-video-i810 driver.
i described the problem in February this year, but was told to correct 
the next version of xorg-server. has already passed the 2 release, and 
the problem persists. i use the latest version of the ports. put in the 
letter: gdb log, X.log, messages log, dmesg, xorg.conf, drirc, glxinfo, 
pciconf and kldstat.

uname -a
FreeBSD ss.su 8.0-CURRENT FreeBSD 8.0-CURRENT #2: Sun May 10 19:22:12 
KRAST 2009     root@ss.su:/usr/obj/usr/src/sys/zl0_M10  i386

ss# gdb Xorg 1617                    
GNU gdb 6.1.1 [FreeBSD]              
Copyright 2004 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain 
conditions.
Type "show copying" to see the 
conditions.                                  
There is absolutely no warranty for GDB.  Type "show warranty" for 
details. 
This GDB was configured as 
"i386-marcel-freebsd"...                         
Attaching to program: /usr/local/bin/Xorg, process 
1617                     
Reading symbols from 
/usr/local/lib/libpciaccess.so.0...done.               
Loaded symbols for 
/usr/local/lib/libpciaccess.so.0                         
Reading symbols from 
/usr/local/lib/libXfont.so.1...done.                   
Loaded symbols for 
/usr/local/lib/libXfont.so.1                             
Reading symbols from 
/usr/local/lib/libfreetype.so.9...done.                
Loaded symbols for 
/usr/local/lib/libfreetype.so.9                          
Reading symbols from 
/usr/local/lib/libXau.so.6...done.                     
Loaded symbols for 
/usr/local/lib/libXau.so.6                               
Reading symbols from 
/usr/local/lib/libfontenc.so.1...done.                 
Loaded symbols for 
/usr/local/lib/libfontenc.so.1                           
Reading symbols from 
/lib/libz.so.4...done.                                 
Loaded symbols for 
/lib/libz.so.4                                           
Reading symbols from 
/usr/local/lib/libpixman-1.so.9...done.                
Loaded symbols for 
/usr/local/lib/libpixman-1.so.9                          
Reading symbols from 
/usr/local/lib/libXdmcp.so.6...done.                   
Loaded symbols for 
/usr/local/lib/libXdmcp.so.6                             
Reading symbols from 
/lib/libcrypto.so.5...done.                            
Loaded symbols for 
/lib/libcrypto.so.5                                      
Reading symbols from 
/usr/lib/librpcsvc.so.4...done.                        
Loaded symbols for 
/usr/lib/librpcsvc.so.4                                  
Reading symbols from 
/lib/libm.so.5...done.                                 
Loaded symbols for 
/lib/libm.so.5                                           
Reading symbols from 
/lib/libgcc_s.so.1...done.                             
Loaded symbols for 
/lib/libgcc_s.so.1                                       
Reading symbols from 
/lib/libc.so.7...done.                                 
Loaded symbols for 
/lib/libc.so.7                                           
Reading symbols from 
/usr/local/lib/xorg/modules/extensions//libglx.so...done.
Loaded symbols for 
/usr/local/lib/xorg/modules/extensions//libglx.so         
Reading symbols from 
/usr/local/lib/xorg/modules/extensions//libdri2.so...done.
Loaded symbols for 
/usr/local/lib/xorg/modules/extensions//libdri2.so         
Reading symbols from 
/usr/local/lib/libdrm.so.2...done.                       
Loaded symbols for 
/usr/local/lib/libdrm.so.2                                 
Reading symbols from 
/usr/local/lib/xorg/modules/extensions//libdri.so...done.
Loaded symbols for 
/usr/local/lib/xorg/modules/extensions//libdri.so          
Reading symbols from 
/usr/local/lib/xorg/modules//libvbe.so...done.           
Loaded symbols for 
/usr/local/lib/xorg/modules//libvbe.so                     
Reading symbols from 
/usr/local/lib/xorg/modules//libint10.so...done.         
Loaded symbols for 
/usr/local/lib/xorg/modules//libint10.so                   
Reading symbols from 
/usr/local/lib/xorg/modules/extensions//librecord.so...done.
Loaded symbols for 
/usr/local/lib/xorg/modules/extensions//librecord.so         
Reading symbols from 
/usr/local/lib/xorg/modules/extensions//libdbe.so...done.  
Loaded symbols for 
/usr/local/lib/xorg/modules/extensions//libdbe.so            
Reading symbols from 
/usr/local/lib/xorg/modules/extensions//libextmod.so...done.
Loaded symbols for 
/usr/local/lib/xorg/modules/extensions//libextmod.so         
Reading symbols from 
/usr/local/lib/xorg/modules/drivers//intel_drv.so...done.  
Loaded symbols for 
/usr/local/lib/xorg/modules/drivers//intel_drv.so            
Reading symbols from 
/usr/local/lib/libdrm_intel.so.1...done.                   
Loaded symbols for 
/usr/local/lib/libdrm_intel.so.1                             
Reading symbols from 
/usr/local/lib/xorg/modules/input//mouse_drv.so...done.    
Loaded symbols for 
/usr/local/lib/xorg/modules/input//mouse_drv.so              
Reading symbols from 
/usr/local/lib/xorg/modules/input//kbd_drv.so...done.      
Loaded symbols for 
/usr/local/lib/xorg/modules/input//kbd_drv.so                
Reading symbols from 
/usr/local/lib/xorg/modules//libvgahw.so...done.           
Loaded symbols for 
/usr/local/lib/xorg/modules//libvgahw.so                     
Reading symbols from 
/usr/local/lib/xorg/modules/drivers//sil164.so...done.     
Loaded symbols for 
/usr/local/lib/xorg/modules/drivers//sil164.so               
Reading symbols from 
/usr/local/lib/xorg/modules/drivers//ch7xxx.so...done.     
Loaded symbols for 
/usr/local/lib/xorg/modules/drivers//ch7xxx.so               
Reading symbols from 
/usr/local/lib/xorg/modules/drivers//ivch.so...done.       
Loaded symbols for 
/usr/local/lib/xorg/modules/drivers//ivch.so                 
Reading symbols from 
/usr/local/lib/xorg/modules/drivers//tfp410.so...done.     
Loaded symbols for 
/usr/local/lib/xorg/modules/drivers//tfp410.so               
Reading symbols from 
/usr/local/lib/xorg/modules/drivers//ch7017.so...done.     
Loaded symbols for 
/usr/local/lib/xorg/modules/drivers//ch7017.so               
Reading symbols from 
/usr/local/lib/xorg/modules//libfb.so...done.              
Loaded symbols for 
/usr/local/lib/xorg/modules//libfb.so                        
Reading symbols from 
/usr/local/lib/xorg/modules//libexa.so...done.             
Loaded symbols for 
/usr/local/lib/xorg/modules//libexa.so                       
Reading symbols from 
/usr/local/lib/dri/i915_dri.so...done.                     
Loaded symbols for 
/usr/local/lib/dri/i915_dri.so                               
Reading symbols from 
/usr/local/lib/libexpat.so.6...done.                       
Loaded symbols for 
/usr/local/lib/libexpat.so.6                                 
Reading symbols from 
/lib/libthr.so.3...done.                                   
[New Thread 343763c0 (LWP 
100130)]                                              
Loaded symbols for 
/lib/libthr.so.3                                             
Reading symbols from 
/libexec/ld-elf.so.1...done.                               
Loaded symbols for 
/libexec/ld-elf.so.1                                         
[Switching to Thread 343763c0 (LWP 
100130)]                                     
0x34219991 in ioctl () from 
/lib/libc.so.7                                      
(gdb) bt 
0x34219991                                                             
#0  0x34219991 in ioctl () from 
/lib/libc.so.7                                  
#1  0x342ba7fb in drmIoctl (fd=10, request=2147771461, arg=0x7fbfe910) 
at xf86drm.c:187
#2  0x342be708 in drmCommandWrite (fd=10, drmCommandIndex=5, 
data=0x7fbfe910, size=4) at 
xf86drm.c:2371                                                                                         

#3  0x342e5b99 in _fence_wait_internal (bufmgr_fake=0x34316c00, 
seq=317908) at 
intel_bufmgr_fake.c:373                                                                                          

#4  0x342e6a16 in drm_intel_bufmgr_fake_wait_idle 
(bufmgr_fake=0x34316c00) at 
intel_bufmgr_fake.c:715                                                                                           

#5  0x342e78f5 in drm_intel_fake_bo_validate (bo=0x34312740) at 
intel_bufmgr_fake.c:1128       
#6  0x342e7f21 in drm_intel_fake_reloc_and_validate_buffer 
(bo=0x34312740) at 
intel_bufmgr_fake.c:1297                                                                                          

#7  0x342e8103 in drm_intel_fake_bo_exec (bo=0x34312740, used=13576, 
cliprects=0x3f749d10, num_cliprects=1, 
DR4=0)                                                                              

    at 
intel_bufmgr_fake.c:1359                                                                 

#8  0x342e5743 in drm_intel_bo_exec (bo=0x34312740, used=13576, 
cliprects=0x3f749d10, num_cliprects=1, 
DR4=0)                                                                                   

    at 
intel_bufmgr.c:143                                                                       

#9  0x3c835583 in do_flush_locked (batch=0x407d16a0, used=13576, 
allow_unlock=0 '\0') at intel_batchbuffer.c:159
#10 0x3c835820 in _intel_batchbuffer_flush (batch=0x407d16a0, 
file=0x3ca8a3c9 "intel_context.c", line=532)
    at intel_batchbuffer.c:249
#11 0x3c854fb7 in intel_flush (ctx=0x409e9000, needs_mi_flush=1 '\001') 
at intel_context.c:532
#12 0x3c8552a9 in intel_glFlush (ctx=0x409e9000) at intel_context.c:564
#13 0x3c89fa0f in _mesa_Flush () at main/context.c:1808
#14 0x3429e8d6 in __glXDRIenterServer (rendering=1 '\001') at glxdri.c:172
#15 0x34292920 in __glXenterServer (rendering=1 '\001') at glxext.c:485
#16 0x34292a95 in __glXDispatch (client=0x404f7580) at glxext.c:543
#17 0x08084f71 in Dispatch () at dispatch.c:437
#18 0x0806af29 in main (argc=8, argv=0x7fbfecb0, envp=0x7fbfecd4) at 
main.c:397
(gdb)

This appears in messages wgen I include 'sysctl hw.dri.0.debug=1'

[drm:pid1617:drm_ioctl]     returning 4
[drm:pid1617:drm_ioctl] pid=1617, cmd=0x80046445, nr=0x45, dev 
0x85084a80, auth=1
[drm:pid1617:i915_wait_irq] irq_nr=317908 breadcrumb=317905
[drm:pid1617:i915_user_irq_get]
[drm:pid1617:drm_ioctl]     returning 4
[drm:pid1617:drm_ioctl] pid=1617, cmd=0x80046445, nr=0x45, dev 
0x85084a80, auth=1
[drm:pid1617:i915_wait_irq] irq_nr=317908 breadcrumb=317905
[drm:pid1617:i915_user_irq_get]
[drm:pid1617:drm_ioctl]     returning 4
[drm:pid1617:drm_ioctl] pid=1617, cmd=0x80046445, nr=0x45, dev 
0x85084a80, auth=1
[drm:pid1617:i915_wait_irq] irq_nr=317908 breadcrumb=317905
[drm:pid1617:i915_user_irq_get]

X.log

X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 8.0-CURRENT i386
Current Operating System: FreeBSD ss.su 8.0-CURRENT FreeBSD 8.0-CURRENT 
#2: Sun May 10 19:22:12 KRAST 2009     
root@ss.su:/usr/obj/usr/src/sys/zl0_M10 
i386                                    
Build Date: 14 May 2009  
12:57:19PM                                                            
                                                                                                

        Before reporting problems, check 
http://wiki.x.org                                     
        to make sure that you have the latest 
version.                                         
Markers: (--) probed, (**) from config file, (==) default 
setting,                             
        (++) from command line, (!!) notice, (II) 
informational,                               
        (WW) warning, (EE) error, (NI) not implemented, (??) 
unknown.                          
(==) Log file: "/var/log/Xorg.0.log", Time: Thu May 14 14:55:32 
2009                           
(==) Using config file: 
"/etc/X11/xorg.conf"                                                   
(==) ServerLayout "X.org 
Configured"                                                           
(**) |-->Screen "Screen0" 
(0)                                                                  
(**) |   |-->Monitor 
"Monitor0"                                                                
(**) |   |-->Device 
"Card0"                                                                    
(**) |-->Input Device 
"Mouse0"                                                                 
(**) |-->Input Device 
"Keyboard0"                                                              
(**) Option "AIGLX" 
"true"                                                                     
(**) Option "AllowEmptyInput" 
"OFF"                                                            
(**) Option "AutoAddDevices" 
"OFF"                                                             
(**) Not automatically adding 
devices                                                          
(==) Not automatically enabling 
devices                                                        
(**) FontPath set 
to:                                                                           

        
/usr/local/lib/X11/fonts/misc/,                                                         

        
/usr/local/lib/X11/fonts/TTF/,                                                          

        
/usr/local/lib/X11/fonts/OTF,                                                           

        
/usr/local/lib/X11/fonts/Type1/,                                                        

        
/usr/local/lib/X11/fonts/100dpi/,                                                       

        
/usr/local/lib/X11/fonts/75dpi/,                                                        

        
/usr/local/lib/X11/fonts/cyrillic,                                                      

        
/usr/local/lib/X11/fonts/webfonts,                                                      

        
/usr/local/lib/X11/fonts/misc/,                                                         

        
/usr/local/lib/X11/fonts/TTF/,                                                          

        
/usr/local/lib/X11/fonts/OTF,                                                           

        
/usr/local/lib/X11/fonts/Type1/,                                                        

        
/usr/local/lib/X11/fonts/100dpi/,                                                       

        
/usr/local/lib/X11/fonts/75dpi/,                                                        

        
built-ins                                                                               

(**) ModulePath set to 
"/usr/local/lib/xorg/modules"                                           
(**) Extension "Composite" is 
enabled                                                          
(II) Loader magic: 
0xba0                                                                        

(II) Module ABI 
versions:                                                                       

        X.Org ANSI C Emulation: 
0.4                                                            
        X.Org Video Driver: 
5.0                                                                
        X.Org XInput driver : 
4.0                                                              
        X.Org Server Extension : 
2.0                                                           
(II) Loader running on 
freebsd                                                                 
(--) Using syscons driver with X support (version 
2.0)                                         
(--) using VT number 
9                                                                         

(--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics 
Device rev 2, Mem @ 0xe8000000/134217728, 0xe0000000/524288, I/O @ 
0x00001800/8, BIOS @ 0x????????/65536                 
(--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics 
Device rev 2, Mem @ 0xf0000000/134217728, 
0xe0080000/524288                                                               

(II) System resource 
ranges:                                                                   
        [0] -1  0       0x000f0000 - 0x000fffff (0x10000) 
MX[B]                                
        [1] -1  0       0x000c0000 - 0x000effff (0x30000) 
MX[B]                                
        [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) 
MX[B]                                
        [3] -1  0       0x0000ffff - 0x0000ffff (0x1) 
IX[B]                                    
        [4] -1  0       0x00000000 - 0x000000ff (0x100) 
IX[B]                                  
(II) "extmod" will be loaded. This was enabled by default and also 
specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also 
specified in the config file.  
(II) "glx" will be loaded. This was enabled by default and also 
specified in the config file.  
(II) "record" will be loaded. This was enabled by default and also 
specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also 
specified in the config file.  
(II) "dri2" will be loaded. This was enabled by default and also 
specified in the config file. 
(II) LoadModule: 
"glx"                                                                          

(II) Loading 
/usr/local/lib/xorg/modules/extensions//libglx.so                                  

(II) Module glx: vendor="X.Org 
Foundation"                                                     
        compiled for 1.6.1, module version = 
1.0.0                                             
        ABI class: X.Org Server Extension, version 
2.0                                         
(**) AIGLX 
enabled                                                                              

(II) Loading extension 
GLX                                                                     
(II) LoadModule: 
"dri2"                                                                         

(II) Loading 
/usr/local/lib/xorg/modules/extensions//libdri2.so                                 

(II) Module dri2: vendor="X.Org 
Foundation"                                                    
        compiled for 1.6.1, module version = 
1.0.0                                             
        ABI class: X.Org Server Extension, version 
2.0                                         
(II) Loading extension 
DRI2                                                                    
(II) LoadModule: 
"dri"                                                                          

(II) Loading 
/usr/local/lib/xorg/modules/extensions//libdri.so                                  

(II) Module dri: vendor="X.Org 
Foundation"                                                     
        compiled for 1.6.1, module version = 
1.0.0                                             
        ABI class: X.Org Server Extension, version 
2.0                                         
(II) Loading extension 
XFree86-DRI                                                             
(II) LoadModule: 
"vbe"                                                                          

(II) Loading 
/usr/local/lib/xorg/modules//libvbe.so                                             

(II) Module vbe: vendor="X.Org 
Foundation"                                                     
        compiled for 1.6.1, module version = 
1.1.0                                             
        ABI class: X.Org Video Driver, version 
5.0                                             
(II) LoadModule: 
"int10"                                                                        

(II) Loading 
/usr/local/lib/xorg/modules//libint10.so                                           

(II) Module int10: vendor="X.Org 
Foundation"                                                   
        compiled for 1.6.1, module version = 
1.0.0                                             
        ABI class: X.Org Video Driver, version 
5.0                                             
(II) LoadModule: 
"record"                                                                       

(II) Loading 
/usr/local/lib/xorg/modules/extensions//librecord.so                               

(II) Module record: vendor="X.Org 
Foundation"                                                  
        compiled for 1.6.1, module version = 
1.13.0                                            
        Module class: X.Org Server 
Extension                                                   
        ABI class: X.Org Server Extension, version 
2.0                                         
(II) Loading extension 
RECORD                                                                  
(II) LoadModule: 
"dbe"                                                                          

(II) Loading 
/usr/local/lib/xorg/modules/extensions//libdbe.so                                  

(II) Module dbe: vendor="X.Org 
Foundation"                                                     
        compiled for 1.6.1, module version = 
1.0.0                                             
        Module class: X.Org Server 
Extension                                                   
        ABI class: X.Org Server Extension, version 
2.0                                         
(II) Loading extension 
DOUBLE-BUFFER                                                           
(II) LoadModule: 
"extmod"                                                                       

(II) Loading 
/usr/local/lib/xorg/modules/extensions//libextmod.so                               

(II) Module extmod: vendor="X.Org 
Foundation"                                                  
        compiled for 1.6.1, module version = 
1.0.0                                             
        Module class: X.Org Server 
Extension                                                   
        ABI class: X.Org Server Extension, version 
2.0                                         
(II) Loading extension 
MIT-SCREEN-SAVER                                                        
(II) Loading extension 
XFree86-VidModeExtension                                                
(II) Loading extension 
XFree86-DGA                                                             
(II) Loading extension 
DPMS                                                                    
(II) Loading extension 
XVideo                                                                  
(II) Loading extension 
XVideo-MotionCompensation                                               
(II) Loading extension 
X-Resource                                                              
(II) LoadModule: 
"freetype"                                                                     

(WW) Warning, couldn't open module 
freetype                                                    
(II) UnloadModule: 
"freetype"                                                                   

(EE) Failed to load module "freetype" (module does not exist, 
0)                               
(II) LoadModule: 
"type1"                                                                        

(WW) Warning, couldn't open module 
type1                                                       
(II) UnloadModule: 
"type1"                                                                      

(EE) Failed to load module "type1" (module does not exist, 
0)                                  
(II) LoadModule: 
"intel"                                                                        

(II) Loading 
/usr/local/lib/xorg/modules/drivers//intel_drv.so                                  

(II) Module intel: vendor="X.Org 
Foundation"                                                   
        compiled for 1.6.1, module version = 
2.7.1                                             
        Module class: X.Org Video 
Driver                                                       
        ABI class: X.Org Video Driver, version 
5.0                                             
(II) LoadModule: 
"mouse"                                                                        

(II) Loading 
/usr/local/lib/xorg/modules/input//mouse_drv.so                                    

(II) Module mouse: vendor="X.Org 
Foundation"                                                   
        compiled for 1.6.1, module version = 
1.4.0                                             
        Module class: X.Org XInput 
Driver                                                      
        ABI class: X.Org XInput driver, version 
4.0                                            
(II) LoadModule: 
"kbd"                                                                          

(II) Loading 
/usr/local/lib/xorg/modules/input//kbd_drv.so                                      

(II) Module kbd: vendor="X.Org 
Foundation"                                                     
        compiled for 1.6.1, module version = 
1.3.2                                             
        Module class: X.Org XInput 
Driver                                                      
        ABI class: X.Org XInput driver, version 
4.0                                            
(II) intel: Driver for Intel Integrated Graphics Chipsets: 
i810,                               
        i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 
915G,                         
        E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, 
G35,                    
        965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, 
Q33,                                         
        Mobile Intel? GM45 Express 
Chipset,                                                    
        Intel Integrated Graphics Device, G45/G43, Q45/Q43, 
G41                                
(II) Primary Device is: PCI 
00@00:02:0                                                         
(II) resource ranges after xf86ClaimFixedResources() 
call:                                     
        [0] -1  0       0x000f0000 - 0x000fffff (0x10000) 
MX[B]                                
        [1] -1  0       0x000c0000 - 0x000effff (0x30000) 
MX[B]                                
        [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) 
MX[B]                                
        [3] -1  0       0x0000ffff - 0x0000ffff (0x1) 
IX[B]                                    
        [4] -1  0       0x00000000 - 0x000000ff (0x100) 
IX[B]                                  
(II) resource ranges after 
probing:                                                            
        [0] -1  0       0x000f0000 - 0x000fffff (0x10000) 
MX[B]                                
        [1] -1  0       0x000c0000 - 0x000effff (0x30000) 
MX[B]                                
        [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) 
MX[B]                                
        [3] 0   0       0x000a0000 - 0x000affff (0x10000) 
MS[B]                                
        [4] 0   0       0x000b0000 - 0x000b7fff (0x8000) 
MS[B]                                 
        [5] 0   0       0x000b8000 - 0x000bffff (0x8000) 
MS[B]                                 
        [6] -1  0       0x0000ffff - 0x0000ffff (0x1) 
IX[B]                                    
        [7] -1  0       0x00000000 - 0x000000ff (0x100) 
IX[B]                                  
        [8] 0   0       0x000003b0 - 0x000003bb (0xc) 
IS[B]                                    
        [9] 0   0       0x000003c0 - 0x000003df (0x20) 
IS[B]                                   
(II) Loading sub module 
"vgahw"                                                                
(II) LoadModule: 
"vgahw"                                                                        

(II) Loading 
/usr/local/lib/xorg/modules//libvgahw.so                                           

(II) Module vgahw: vendor="X.Org 
Foundation"                                                   
        compiled for 1.6.1, module version = 
0.1.0                                             
        ABI class: X.Org Video Driver, version 
5.0                                             
(II) Loading sub module 
"ramdac"                                                               
(II) LoadModule: 
"ramdac"                                                                       

(II) Module "ramdac" already 
built-in                                                          
(==) intel(0): Depth 24, (--) framebuffer bpp 
32                                               
(==) intel(0): RGB weight 
888                                                                  
(==) intel(0): Default visual is 
TrueColor                                                     
(**) intel(0): Option "AccelMethod" 
"EXA"                                                      
(**) intel(0): Option "Tiling" 
"off"                                                           
(II) intel(0): Integrated Graphics Chipset: Intel(R) 
855GM                                     
(--) intel(0): Chipset: 
"852GM/855GM"                                                          
(--) intel(0): Linear framebuffer at 
0xE8000000                                                
(--) intel(0): IO registers at addr 
0xE0000000                                                 
(**) intel(0): Using EXA for 
acceleration                                                      
(II) intel(0): 2 display pipes 
available.                                                      
(II) Loading sub module 
"ddc"                                                                  
(II) LoadModule: 
"ddc"                                                                          

(II) Module "ddc" already 
built-in                                                             
(II) Loading sub module 
"i2c"                                                                  
(II) LoadModule: 
"i2c"                                                                          

(II) Module "i2c" already 
built-in                                                             
(II) intel(0): Output VGA using monitor section 
Monitor0                                       
(II) intel(0): Output LVDS has no monitor 
section                                              
(II) intel(0): I2C bus "LVDSDDC_C" 
initialized.                                                
(II) intel(0): Attempting to determine panel fixed 
mode.                                       
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered 
at address 0x60.      
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 
0xA0.                         
(II) intel(0): EDID vendor "SEC", prod id 
22082                                                
(II) intel(0): I2C bus "DVODDC_D" 
initialized.                                                 
(II) Loading sub module 
"sil164"                                                               
(II) LoadModule: 
"sil164"                                                                       

(II) Loading 
/usr/local/lib/xorg/modules/drivers//sil164.so                                     

(II) Module sil164: vendor="X.Org 
Foundation"                                                  
        compiled for 1.6.1, module version = 
1.0.0                                             
        ABI class: X.Org Video Driver, version 
5.0                                             
(II) intel(0): I2C bus "DVOI2C_E" 
initialized.                                                 
(II) Loading sub module 
"ch7xxx"                                                               
(II) LoadModule: 
"ch7xxx"                                                                       

(II) Loading 
/usr/local/lib/xorg/modules/drivers//ch7xxx.so                                     

(II) Module ch7xxx: vendor="X.Org 
Foundation"                                                  
        compiled for 1.6.1, module version = 
1.0.0                                             
        ABI class: X.Org Video Driver, version 
5.0                                             
(II) intel(0): I2C bus "DVOI2C_E" 
removed.                                                     
(II) intel(0): I2C bus "DVOI2C_E" 
initialized.                                                 
(II) Loading sub module 
"ivch"                                                                 
(II) LoadModule: 
"ivch"                                                                         

(II) Loading 
/usr/local/lib/xorg/modules/drivers//ivch.so                                       

(II) Module ivch: vendor="X.Org 
Foundation"                                                    
        compiled for 1.6.1, module version = 
1.0.0                                             
        ABI class: X.Org Video Driver, version 
5.0                                             
(II) intel(0): I2C bus "DVOI2C_E" 
removed.                                                     
(II) intel(0): I2C bus "DVOI2C_B" 
initialized.                                                 
(II) Loading sub module 
"tfp410"                                                               
(II) LoadModule: 
"tfp410"                                                                       

(II) Loading 
/usr/local/lib/xorg/modules/drivers//tfp410.so                                     

(II) Module tfp410: vendor="X.Org 
Foundation"                                                  
        compiled for 1.6.1, module version = 
1.0.0                                             
        ABI class: X.Org Video Driver, version 
5.0                                             
(II) intel(0): I2C bus "DVOI2C_B" 
removed.                                                     
(II) intel(0): I2C bus "DVOI2C_E" 
initialized.                                                 
(II) Loading sub module 
"ch7017"                                                               
(II) LoadModule: 
"ch7017"                                                                       

(II) Loading 
/usr/local/lib/xorg/modules/drivers//ch7017.so                                     

(II) Module ch7017: vendor="X.Org 
Foundation"                                                  
        compiled for 1.6.1, module version = 
1.0.0                                             
        ABI class: X.Org Video Driver, version 
5.0                                             
(II) intel(0): I2C bus "DVOI2C_E" 
removed.                                                     
(II) intel(0): I2C bus "DVOI2C_E" 
initialized.                                                 
(EE) intel(0): ch701x not detected, got 29: from DVOI2C_E Slave 
234.                           
(II) intel(0): I2C bus "DVOI2C_E" 
removed.                                                     
(II) intel(0): I2C bus "DVODDC_D" 
removed.                                                     
(==) intel(0): Write-combining range (0xa0000,0x10000) was already 
clear                       
(II) intel(0): Resizable framebuffer: not available (1 
3)                                      
(II) intel(0): I2C bus "CRTDDC_A" 
initialized.                                                 
(II) intel(0): I2C bus "CRTDDC_A" 
removed.                                                     
(II) intel(0): EDID vendor "SEC", prod id 
22082                                                
(II) intel(0): Output VGA 
disconnected                                                         
(II) intel(0): Output LVDS 
connected                                                           
(II) intel(0): Using exact sizes for initial 
modes                                             
(II) intel(0): Output LVDS using initial mode 
1280x768                                         
(==) intel(0): Write-combining range (0xa0000,0x10000) was already 
clear                       
(II) intel(0): detected 128 kB 
GTT.                                                            
(II) intel(0): detected 32636 kB stolen 
memory.                                                
(==) intel(0): video overlay key set to 
0x101fe                                                
(==) intel(0): Using gamma correction (1.0, 1.0, 
1.0)                                          
(==) intel(0): DPI set to (96, 
96)                                                             
(II) Loading sub module 
"fb"                                                                   
(II) LoadModule: 
"fb"                                                                           

(II) Loading 
/usr/local/lib/xorg/modules//libfb.so                                              

(II) Module fb: vendor="X.Org 
Foundation"                                                      
        compiled for 1.6.1, module version = 
1.0.0                                             
        ABI class: X.Org ANSI C Emulation, version 
0.4                                         
(II) Loading sub module 
"exa"                                                                  
(II) LoadModule: 
"exa"                                                                          

(II) Loading 
/usr/local/lib/xorg/modules//libexa.so                                             

(II) Module exa: vendor="X.Org 
Foundation"                                                     
        compiled for 1.6.1, module version = 
2.4.0                                             
        ABI class: X.Org Video Driver, version 
5.0                                             
(II) intel(0): Comparing regs from server start up to After 
PreInit                            
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 
0xd0000009              
(WW) intel(0): PP_STATUS before: on, ready, sequencing 
idle                                    
(WW) intel(0): PP_STATUS after: on, ready, sequencing 
on                                       
(==) Depth 24 pixmap format is 32 
bpp                                                          
(II) do I need RAC?  No, I 
don't.                                                              
(II) resource ranges after 
preInit:                                                            
        [0] -1  0       0x000f0000 - 0x000fffff (0x10000) 
MX[B]                                
        [1] -1  0       0x000c0000 - 0x000effff (0x30000) 
MX[B]                                
        [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) 
MX[B]                                
        [3] 0   0       0x000a0000 - 0x000affff (0x10000) 
MS[B](OprD)                          
        [4] 0   0       0x000b0000 - 0x000b7fff (0x8000) 
MS[B](OprD)                           
        [5] 0   0       0x000b8000 - 0x000bffff (0x8000) 
MS[B](OprD)                           
        [6] -1  0       0x0000ffff - 0x0000ffff (0x1) 
IX[B]                                    
        [7] -1  0       0x00000000 - 0x000000ff (0x100) 
IX[B]                                  
        [8] 0   0       0x000003b0 - 0x000003bb (0xc) 
IS[B](OprU)                              
        [9] 0   0       0x000003c0 - 0x000003df (0x20) 
IS[B](OprU)                             
(II) intel(0): Kernel reported 491520 total, 0 
used                                            
(II) intel(0): I830CheckAvailableMemory: 1966080 kB 
available                                  
(WW) intel(0): DRI2 requires 
UXA                                                               
drmOpenDevice: node name is 
/dev/dri/card0                                                     
drmOpenDevice: open result is 9, 
(OK)                                                          
drmOpenDevice: node name is 
/dev/dri/card0                                                     
drmOpenDevice: open result is 9, 
(OK)                                                          
drmOpenByBusid: Searching for BusID 
pci:0000:00:02.0                                           
drmOpenDevice: node name is 
/dev/dri/card0                                                     
drmOpenDevice: open result is 9, 
(OK)                                                          
drmOpenByBusid: drmOpenMinor returns 
9                                                         
drmOpenByBusid: drmGetBusid reports 
pci:0000:00:02.0                                           
(II) [drm] DRM interface version 
1.2                                                           
(II) [drm] DRM open master 
succeeded.                                                          
(II) intel(0): [drm] Using the DRM lock SAREA also for 
drawables.                              
(II) intel(0): [drm] framebuffer mapped by ddx 
driver                                          
(II) intel(0): [drm] added 1 reserved context for 
kernel                                       
(II) intel(0): X context handle = 
0x1                                                          
(II) intel(0): [drm] installed DRM signal 
handler                                              
(**) intel(0): Framebuffer compression 
disabled                                                
(**) intel(0): Tiling 
disabled                                                                 
(==) intel(0): VideoRam: 131072 
KB                                                             
(II) intel(0): Attempting memory allocation with untiled 
buffers.                              
(II) intel(0): Untiled allocation 
successful.                                                  
(II) intel(0): [drm] Registers = 
0xe0000000                                                    
(II) intel(0): [drm] ring buffer = 
0xe8000000                                                  
(II) intel(0): [drm] mapped front buffer at 0xe8820000, handle = 
0xe8820000                    
(II) intel(0): [drm] mapped back buffer at 0xe8e60000, handle = 
0xe8e60000                     
(II) intel(0): [drm] mapped depth buffer at 0xe94a0000, handle = 
0xe94a0000                    
(II) intel(0): [drm] mapped classic textures at 0xeb2aa000, handle = 
0xeb2aa000                
(II) intel(0): [drm] Initialized kernel agp heap manager, 
33554432                             
(II) intel(0): [dri] visual configs 
initialized                                                
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 
0x0000                 
(==) intel(0): Write-combining range (0xa0000,0x10000) was already 
clear                       
(II) EXA(0): Offscreen pixmap area of 19660800 
bytes                                           
(II) EXA(0): Driver registered support for the following 
operations:                           
(II)         
Solid                                                                              

(II)         
Copy                                                                               

(II)         Composite (RENDER 
acceleration)                                                   
(==) intel(0): Backing store 
disabled                                                          
(==) intel(0): Silken mouse 
enabled                                                            
(II) intel(0): Initializing HW 
Cursor                                                          
(II) intel(0): [DRI] installation 
complete                                                     
(WW) intel(0): drmDropMaster failed: Unknown error: 
-1                                         
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01fdf000 (pgoffset 
8159)                    
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01fe9000 (pgoffset 
8169)                    
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01fea000 (pgoffset 
8170)                    
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x032aa000 (pgoffset 
12970)                   
(II) intel(0): Fixed memory allocation 
layout:                                                 
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 
kB)                                     
(II) intel(0): 0x00020000-0x0081ffff: fake bufmgr (8192 
kB)                                    
(II) intel(0): 0x00820000-0x00e5ffff: front buffer (6400 
kB)                                   
(II) intel(0): 0x00e60000-0x0149ffff: back buffer (6400 
kB)                                    
(II) intel(0): 0x014a0000-0x01adffff: depth buffer (6400 
kB)                                   
(II) intel(0): 0x01fdf000:            end of stolen 
memory                                     
(II) intel(0): 0x01fdf000-0x01fe8fff: HW cursors (40 kB, 
0x0000000019a00000 physical           
)                                                                                               

(II) intel(0): 0x01fe9000-0x01fe9fff: overlay registers (4 kB, 
0x0000000019a0a000 physical     
)                                                                                               

(II) intel(0): 0x01fea000-0x032a9fff: exa offscreen (19200 
kB)                                 
(II) intel(0): 0x032aa000-0x052a9fff: classic textures (32768 
kB)                              
(II) intel(0): 0x08000000:            end of 
aperture                                          
(II) intel(0): using SSC reference clock of 66 
MHz                                             
(II) intel(0): Selecting standard 18 bit TMDS pixel 
format.                                    
(II) intel(0): Output 
configuration:                                                           
(II) intel(0):   Pipe A is 
off                                                                 
(II) intel(0):   Display plane A is now disabled and connected to pipe 
A.                      
(WW) intel(0):   Hardware claims pipe A is on while software believes it 
is off                
(II) intel(0):   Pipe B is 
on                                                                  
(II) intel(0):   Display plane B is now enabled and connected to pipe 
B.                       
(II) intel(0):   Output VGA is connected to pipe 
none                                          
(II) intel(0):   Output LVDS is connected to pipe 
B                                            
(II) intel(0): [drm] dma control initialized, using IRQ 
16                                     
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled 
message.                 
(II) intel(0): DPMS 
enabled                                                                    
(==) intel(0): Intel XvMC decoder 
disabled                                                     
(II) intel(0): Set up overlay 
video                                                            
(II) intel(0): direct rendering: XF86DRI 
Enabled                                               
(WW) intel(0): Option "DRI2" is not 
used                                                       
(--) RandR 
disabled                                                                             

(II) Initializing built-in extension Generic Event 
Extension                                   
(II) Initializing built-in extension 
SHAPE                                                     
(II) Initializing built-in extension 
MIT-SHM                                                   
(II) Initializing built-in extension 
XInputExtension                                           
(II) Initializing built-in extension 
XTEST                                                     
(II) Initializing built-in extension 
BIG-REQUESTS                                              
(II) Initializing built-in extension 
SYNC                                                      
(II) Initializing built-in extension 
XKEYBOARD                                                 
(II) Initializing built-in extension 
XC-MISC                                                   
(II) Initializing built-in extension 
XINERAMA                                                  
(II) Initializing built-in extension 
XFIXES                                                    
(II) Initializing built-in extension 
RENDER                                                    
(II) Initializing built-in extension 
RANDR                                                     
(II) Initializing built-in extension 
COMPOSITE                                                 
(II) Initializing built-in extension 
DAMAGE                                                    
(II) AIGLX: Screen 0 is not DRI2 
capable                                                       
drmOpenDevice: node name is 
/dev/dri/card0                                                     
drmOpenDevice: open result is 10, 
(OK)                                                         
drmOpenByBusid: Searching for BusID 
pci:0000:00:02.0                                           
drmOpenDevice: node name is 
/dev/dri/card0                                                     
drmOpenDevice: open result is 10, 
(OK)                                                         
drmOpenByBusid: drmOpenMinor returns 
10                                                        
drmOpenByBusid: drmGetBusid reports 
pci:0000:00:02.0                                           
(II) AIGLX: enabled 
GLX_SGI_make_current_read                                                  
(II) AIGLX: enabled 
GLX_MESA_copy_sub_buffer                                                   
(II) AIGLX: enabled GLX_SGI_swap_control and 
GLX_MESA_swap_control                             
(II) AIGLX: enabled GLX_texture_from_pixmap with driver 
support                                
(II) AIGLX: Loaded and initialized 
/usr/local/lib/dri/i915_dri.so                              
(II) GLX: Initialized DRI GL provider for screen 
0                                             
(II) intel(0): Setting screen physical size to 305 x 
183                                       
(**) Option "Protocol" 
"auto"                                                                  
(**) Mouse0: Device: 
"/dev/psm0"                                                               
(**) Mouse0: Protocol: 
"auto"                                                                  
(**) Option 
"CorePointer"                                                                       

(**) Mouse0: always reports core 
events                                                        
(**) Option "Device" 
"/dev/psm0"                                                               
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 
50                                              
(**) Option "ZAxisMapping" "4 5 6 
7"                                                           
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 
7                                               
(**) Mouse0: Buttons: 
11                                                                       
(**) Mouse0: Sensitivity: 
1                                                                    
(II) XINPUT: Adding extended input device "Mouse0" (type: 
MOUSE)                               
(**) Mouse0: (accel) keeping acceleration scheme 
1                                             
(**) Mouse0: (accel) filter chain progression: 
2.00                                            
(**) Mouse0: (accel) filter stage 0: 20.00 
ms                                                  
(**) Mouse0: (accel) set acceleration profile 
0                                                
(II) Mouse0: SetupAuto: hw.iftype is 3, hw.model is 
4                                          
(II) Mouse0: SetupAuto: protocol is 
IMPS/2                                                     
(II) Mouse0: ps2EnableDataReporting: 
succeeded                                                 
(**) Option 
"CoreKeyboard"                                                                      

(**) Keyboard0: always reports core 
events                                                     
(**) Option "Protocol" 
"standard"                                                              
(**) Keyboard0: Protocol: 
standard                                                             
(**) Option "AutoRepeat" "500 
30"                                                              
(**) Option "XkbRules" 
"xorg"                                                                  
(**) Keyboard0: XkbRules: 
"xorg"                                                               
(**) Option "XkbModel" 
"pc105"                                                                 
(**) Keyboard0: XkbModel: 
"pc105"                                                              
(**) Option "XkbLayout" 
"us,ru(winkeys)"                                                       
(**) Keyboard0: XkbLayout: 
"us,ru(winkeys)"                                                    
(**) Option "XkbOptions" 
"grp:alt_shift_toggle"                                                
(**) Keyboard0: XkbOptions: 
"grp:alt_shift_toggle"                                             
(**) Option "CustomKeycodes" 
"off"                                                             
(**) Keyboard0: CustomKeycodes 
disabled                                                        
(II) XINPUT: Adding extended input device "Keyboard0" (type: 
KEYBOARD)                         
(II) intel(0): [drm] mapped front buffer at 0xe8820000, handle = 
0xe8820000                    
(II) intel(0): I2C bus "CRTDDC_A" 
initialized.                                                 
(II) intel(0): I2C bus "CRTDDC_A" 
removed.                                                     
(II) intel(0): EDID vendor "SEC", prod id 
22082                                                
(II) intel(0): Using EDID range info for horizontal 
sync                                       
(II) intel(0): Using EDID range info for vertical 
refresh                                      
(II) intel(0): Printing DDC gathered 
Modelines:                                                
(II) intel(0): Modeline "1280x768"x0.0   68.93  1280 1296 1344 1408  768 
771 777 816 -hsync -vsync (49.0 
kHz)                                                                                   

(II) intel(0): EDID vendor "SEC", prod id 
22082                                                
(II) intel(0): I2C bus "CRTDDC_A" 
initialized.                                                 
(II) intel(0): I2C bus "CRTDDC_A" 
removed.                                                     
(II) intel(0): EDID vendor "SEC", prod id 
22082                                                
(II) intel(0): Using hsync ranges from config 
file                                             
(II) intel(0): Using vrefresh ranges from config 
file                                          
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x768"x0.0   68.93  1280 1296 1344 1408  768 
771 777 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 22082
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SEC", prod id 22082
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x768"x0.0   68.93  1280 1296 1344 1408  768 
771 777 816 -hsync -vsync (49.0 kHz)
(II) intel(0): EDID vendor "SEC", prod id 22082
FreeType: couldn't find encoding 'microsoft-cp1251' for 
'/usr/local/lib/X11/fonts/webfonts/trebuc.ttf'
FreeType: couldn't find encoding 'microsoft-cp1251' for 
'/usr/local/lib/X11/fonts/webfonts/trebuc.ttf'
FreeType: couldn't find encoding 'microsoft-cp1251' for 
'/usr/local/lib/X11/fonts/webfonts/georgiab.ttf'
(II) UnloadModule: "mouse"
(II) UnloadModule: "kbd"
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(WW) intel(0): drmDropMaster failed: Unknown error: -1
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0x86e1c000 at 0x344fd000
(II) intel(0): [drm] Closed DRM master.

glxinfo

name of display: 
:0.0                                                                          

Failed to initialize GEM.  Falling back to 
classic.                                           
display: :0  screen: 
0                                                                        
direct rendering: 
Yes                                                                          

server glx vendor string: 
SGI                                                                 
server glx version string: 
1.2                                                                
server glx 
extensions:                                                                         

    GLX_ARB_multisample, GLX_EXT_import_context, 
GLX_EXT_texture_from_pixmap,                 
    GLX_EXT_visual_info, GLX_EXT_visual_rating, 
GLX_MESA_copy_sub_buffer,                     
    GLX_OML_swap_method, GLX_SGI_make_current_read, 
GLX_SGI_swap_control,                     
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, 
GLX_SGIX_visual_select_group                     
client glx vendor string: 
SGI                                                                 
client glx version string: 
1.4                                                                
client glx 
extensions:                                                                         

    GLX_ARB_get_proc_address, GLX_ARB_multisample, 
GLX_EXT_import_context,                    
    GLX_EXT_visual_info, GLX_EXT_visual_rating, 
GLX_MESA_allocate_memory,                     
    GLX_MESA_copy_sub_buffer, 
GLX_MESA_swap_control,                                          
    GLX_MESA_swap_frame_usage, GLX_OML_swap_method, 
GLX_OML_sync_control,                     
    GLX_SGI_make_current_read, GLX_SGI_swap_control, 
GLX_SGI_video_sync,                      
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, 
GLX_SGIX_pbuffer,                                
    GLX_SGIX_visual_select_group, 
GLX_EXT_texture_from_pixmap                                 
GLX version: 
1.2                                                                               

GLX 
extensions:                                                                                

    GLX_ARB_get_proc_address, GLX_ARB_multisample, 
GLX_EXT_import_context,                    
    GLX_EXT_visual_info, GLX_EXT_visual_rating, 
GLX_MESA_copy_sub_buffer,                     
    GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, 
GLX_OML_swap_method,                    
    GLX_SGI_make_current_read, GLX_SGI_swap_control, 
GLX_SGI_video_sync,                      
    GLX_SGIS_multisample, GLX_SGIX_fbconfig, 
GLX_SGIX_visual_select_group                     
OpenGL vendor string: Tungsten Graphics, 
Inc                                                  
OpenGL renderer string: Mesa DRI Intel(R) 852GM/855GM 20090418 2009Q1 
x86/MMX/SSE2            
OpenGL version string: 1.3 Mesa 
7.4.1                                                         
OpenGL 
extensions:                                                                             

    GL_ARB_multisample, GL_ARB_multitexture, 
GL_ARB_point_parameters,                         
    GL_ARB_texture_border_clamp, 
GL_ARB_texture_compression,                                  
    GL_ARB_texture_cube_map, 
GL_ARB_texture_env_add,                                          
    GL_ARB_texture_env_combine, 
GL_ARB_texture_env_crossbar,                                  
    GL_ARB_texture_env_dot3, 
GL_ARB_texture_mirrored_repeat,                                  
    GL_ARB_texture_rectangle, 
GL_ARB_transpose_matrix,                                        
    GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, 
GL_ARB_window_pos,                    
    GL_EXT_abgr, GL_EXT_bgra, 
GL_EXT_blend_color,                                             
    GL_EXT_blend_equation_separate, 
GL_EXT_blend_func_separate,                               
    GL_EXT_blend_logic_op, GL_EXT_blend_minmax, 
GL_EXT_blend_subtract,                        
    GL_EXT_clip_volume_hint, GL_EXT_cull_vertex, 
GL_EXT_compiled_vertex_array,                
    GL_EXT_copy_texture, GL_EXT_draw_range_elements, 
GL_EXT_fog_coord,                        
    GL_EXT_multi_draw_arrays, 
GL_EXT_packed_depth_stencil,                                    
    GL_EXT_packed_pixels, GL_EXT_point_parameters, 
GL_EXT_polygon_offset,                     
    GL_EXT_rescale_normal, 
GL_EXT_secondary_color,                                            
    GL_EXT_separate_specular_color, GL_EXT_stencil_wrap, 
GL_EXT_subtexture,                   
    GL_EXT_texture, GL_EXT_texture3D, 
GL_EXT_texture_edge_clamp,                              
    GL_EXT_texture_env_add, 
GL_EXT_texture_env_combine,                                       
    GL_EXT_texture_env_dot3, 
GL_EXT_texture_filter_anisotropic,                               
    GL_EXT_texture_lod_bias, GL_EXT_texture_object, 
GL_EXT_texture_rectangle,                 
    GL_EXT_vertex_array, 
GL_3DFX_texture_compression_FXT1,                                    
    GL_APPLE_client_storage, 
GL_APPLE_packed_pixels,                                          
    GL_ATI_blend_equation_separate, 
GL_IBM_rasterpos_clip,                                    
    GL_IBM_texture_mirrored_repeat, 
GL_INGR_blend_func_separate,                              
    GL_MESA_pack_invert, GL_MESA_ycbcr_texture, 
GL_MESA_window_pos,                           
    GL_NV_blend_square, GL_NV_light_max_exponent, 
GL_NV_point_sprite,                         
    GL_NV_texture_rectangle, GL_NV_texgen_reflection, 
GL_NV_vertex_program,                   
    GL_NV_vertex_program1_1, GL_OES_read_format, 
GL_SGIS_generate_mipmap,                     
    GL_SGIS_texture_border_clamp, 
GL_SGIS_texture_edge_clamp,                                 
    GL_SGIS_texture_lod, 
GL_SUN_multi_draw_arrays                                             

36 GLX Visuals
   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x21 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x22 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x78 24 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x79 24 tc  0 32  0 r  .  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x7a 24 tc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x7b 24 tc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x7c 24 tc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x7d 24 tc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x7e 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x7f 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x80 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x81 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x82 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x83 24 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x84 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x85 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x86 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x87 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x88 24 dc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x89 24 dc  0 32  0 r  .  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x8a 24 dc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x8b 24 dc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x8c 24 dc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x8d 24 dc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x8e 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x8f 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x90 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x91 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x92 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x93 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x94 24 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x95 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x96 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x97 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x98 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x53 32 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None

36 GLXFBConfigs:
   visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
 id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------
0x54  0 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x55  0 tc  0 32  0 r  .  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x56  0 tc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x57  0 tc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x58  0 tc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x59  0 tc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x5a  0 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x5b  0 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x5c  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x5d  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x5e  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x5f  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x60  0 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x61  0 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x62  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x63  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x64  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x65  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x66  0 dc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x67  0 dc  0 32  0 r  .  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x68  0 dc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x69  0 dc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x6a  0 dc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
0x6b  0 dc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
0x6c  0 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x6d  0 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x6e  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x6f  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x70  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x71  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x72  0 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x73  0 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x74  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x75  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
0x76  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
0x77  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow

dmesg

Copyright (c) 1992-2009 The FreeBSD 
Project.                                                  
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 
1994                      
        The Regents of the University of California. All rights 
reserved.                     
FreeBSD is a registered trademark of The FreeBSD 
Foundation.                                  
FreeBSD 8.0-CURRENT #2: Sun May 10 19:22:12 KRAST 
2009                                        
    
root@ss.su:/usr/obj/usr/src/sys/zl0_M10                                                    

Timecounter "i8254" frequency 1193182 Hz quality 
0                                            
CPU: Intel(R) Pentium(R) M processor 1.50GHz (1496.26-MHz 686-class 
CPU)                      
  Origin = "GenuineIntel"  Id = 0x6d8  Stepping = 
8                                           
  
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>                                                           

  
Features2=0x180<EST,TM2>                                                                      

real memory  = 2147483648 (2048 
MB)                                                            
avail memory = 2056859648 (1961 
MB)                                                            
ACPI APIC Table: <HP     09B8    
 >                                                             
This module (opensolaris) contains code covered by 
the                                         
Common Development and Distribution License 
(CDDL)                                             
see 
http://opensolaris.org/os/licensing/opensolaris_license/                                    

ioapic0 <Version 2.0> irqs 0-23 on 
motherboard                                                 
kbd1 at 
kbdmux0                                                                                 

cryptosoft0: <software crypto> on 
motherboard                                                  
acpi0: <HP 09B8> on 
motherboard                                                                
acpi0: 
[ITHREAD]                                                                                

acpi0: Power Button 
(fixed)                                                                    
Timecounter "ACPI-fast" frequency 3579545 Hz quality 
1000                                      
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on 
acpi0                         
acpi_ec0: <Embedded Controller: GPE 0x1d> port 0x62,0x66 on 
acpi0                              
acpi_hpet0: <High Precision Event Timer> iomem 0-0x3ff on 
acpi0                                
device_attach: acpi_hpet0 attach returned 
12                                                   
acpi_acad0: <AC Adapter> on 
acpi0                                                              
battery0: <ACPI Control Method Battery> on 
acpi0                                               
acpi_lid0: <Control Method Lid Switch> on 
acpi0                                                
acpi_button0: <Sleep Button> on 
acpi0                                                          
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on 
acpi0                                        
pci0: <ACPI PCI bus> on 
pcib0                                                                  
pci0: <base peripheral> at device 0.1 (no driver 
attached)                                     
pci0: <base peripheral> at device 0.3 (no driver 
attached)                                     
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 
0xe8000000-0xefffffff,0xe0000000-0xe007ffff irq 16 at device 2.0 on 
pci0                                                              
agp0: <Intel 8285xM (85xGM GMCH) SVGA controller> on 
vgapci0                                   
agp0: detected 32636k stolen 
memory                                                            
agp0: aperture size is 
128M                                                                    
drm0: <Intel i852GM/i855GM GMCH> on 
vgapci0                                                    
vgapci0: child drm0 requested 
pci_enable_busmaster                                             
info: [drm] AGP at 0xe8000000 
128MB                                                            
info: [drm] Initialized i915 1.6.0 
20080730                                                    
vgapci1: <VGA-compatible display> mem 
0xf0000000-0xf7ffffff,0xe0080000-0xe00fffff at device 2.1 on 
pci0                                                                                         

uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f 
irq 16 at device 29.0 on 
pci0                                                                                             

uhci0: 
[ITHREAD]                                                                                

uhci0: LegSup = 
0x003b                                                                          

usbus0: <Intel 82801DB (ICH4) USB controller USB-A> on 
uhci0                                   
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f 
irq 19 at device 29.1 on 
pci0                                                                                             

uhci1: 
[ITHREAD]                                                                                

uhci1: LegSup = 
0x0010                                                                          

usbus1: <Intel 82801DB (ICH4) USB controller USB-B> on 
uhci1                                   
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f 
irq 18 at device 29.2 on 
pci0                                                                                             

uhci2: 
[ITHREAD]                                                                                

uhci2: LegSup = 
0x0010                                                                          

usbus2: <Intel 82801DB (ICH4) USB controller USB-C> on 
uhci2                                   
ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 
0xe0100000-0xe01003ff irq 23 at device 29.7 on 
pci0                                                                                    

ehci0: 
[ITHREAD]                                                                                

usbus3: EHCI version 
1.0                                                                       
usbus3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on 
ehci0                                 
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on 
pci0                                            
pci2: <ACPI PCI bus> on 
pcib1                                                                  
rl0: <RealTek 8139 10/100BaseTX> port 0x3000-0x30ff mem 
0xe0207800-0xe02078ff irq 16 at device 0.0 on 
pci2                                                                                      

miibus0: <MII bus> on 
rl0                                                                      
rlphy0: <RealTek internal media interface> PHY 0 on 
miibus0                                    
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 
auto                                  
rl0: Ethernet address: 
00:c0:9f:6b:7b:da                                                       
rl0: 
[ITHREAD]                                                                                  

iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xe0206000-0xe0206fff irq 18 at 
device 6.0 on pci2    
iwi0: 
[ITHREAD]                                                                                 

cbb0: <TI6411 PCI-CardBus Bridge> at device 9.0 on 
pci2                                        
cardbus0: <CardBus bus> on 
cbb0                                                                
pccard0: <16-bit PCCard bus> on 
cbb0                                                           
cbb0: 
[FILTER]                                                                                  

fwohci0: <1394 Open Host Controller Interface> mem 
0xe0207000-0xe02077ff,0xe0200000-0xe0203fff irq 22 at device 9.2 on 
pci2                                                                    
fwohci0: 
[ITHREAD]                                                                              

fwohci0: OHCI version 1.10 
(ROM=1)                                                             
fwohci0: No. of Isochronous channels is 
4.                                                     
fwohci0: EUI64 
00:c0:9f:00:00:32:ac:0c                                                          

fwohci0: Phy 1394a available S400, 2 
ports.                                                    
fwohci0: Link S400, max_rec 2048 
bytes.                                                        
firewire0: <IEEE1394(FireWire) bus> on 
fwohci0                                                 
fwe0: <Ethernet over FireWire> on 
firewire0                                                    
if_fwe0: Fake Ethernet address: 
02:c0:9f:32:ac:0c                                              
fwe0: Ethernet address: 
02:c0:9f:32:ac:0c                                                      
fwip0: <IP over FireWire> on 
firewire0                                                         
fwip0: Firewire address: 00:c0:9f:00:00:32:ac:0c @ 0xfffe00000000, S400, 
maxrec 2048           
sbp0: <SBP-2/SCSI over FireWire> on 
firewire0                                                  
dcons_crom0: <dcons configuration ROM> on 
firewire0                                            
dcons_crom0: bus_addr 
0x11fc000                                                                
fwohci0: Initiate bus 
reset                                                                    
fwohci0: fwohci_intr_core: BUS 
reset                                                           
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=2, 
CYCLEMASTER mode                
pci2: <mass storage> at device 9.3 (no driver 
attached)                                        
pci2: <base peripheral, SD host controller> at device 9.4 (no driver 
attached)                 
isab0: <PCI-ISA bridge> at device 31.0 on 
pci0                                                 
isa0: <ISA bus> on 
isab0                                                                        

atapci0: <Intel ICH4 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on 
pci0                                                                          

ata0: <ATA channel 0> on 
atapci0                                                               
ata0: 
[ITHREAD]                                                                                 

ata1: <ATA channel 1> on 
atapci0                                                               
ata1: 
[ITHREAD]                                                                                 

ichsmb0: <Intel 82801DC (ICH4) SMBus controller> port 0x1880-0x189f irq 
17 at device 31.3 on 
pci0                                                                                               

ichsmb0: 
[ITHREAD]                                                                              

smbus0: <System Management Bus> on 
ichsmb0                                                     
smb0: <SMBus generic I/O> on 
smbus0                                                            
pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem 
0xe0100c00-0xe0100dff,0xe0100800-0xe01008ff irq 17 at device 31.5 on 
pci0                                                    
pcm0: 
[ITHREAD]                                                                                 

pcm0: <Conexant CX20468-21 AC97 
Codec>                                                         
pci0: <simple comms, generic modem> at device 31.6 (no driver 
attached)                        
acpi_tz0: <Thermal Zone> on 
acpi0                                                              
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on 
acpi0                                      
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on 
acpi0                           
atkbd0: <AT Keyboard> irq 1 on 
atkbdc0                                                         
kbd0 at 
atkbd0                                                                                  

atkbd0: 
[GIANT-LOCKED]                                                                          

atkbd0: 
[ITHREAD]                                                                               

psm0: <PS/2 Mouse> irq 12 on 
atkbdc0                                                           
psm0: 
[GIANT-LOCKED]                                                                            

psm0: 
[ITHREAD]                                                                                 

psm0: model IntelliMouse, device ID 
3                                                          
cpu0: <ACPI CPU> on 
acpi0                                                                      
est0: <Enhanced SpeedStep Frequency Control> on 
cpu0                                           
p4tcc0: <CPU Frequency Thermal Control> on 
cpu0                                                
acpi_hpet0: <High Precision Event Timer> iomem 0-0x3ff on 
acpi0                                
device_attach: acpi_hpet0 attach returned 
12                                                   
pmtimer0 on 
isa0                                                                                

orm0: <ISA Option ROMs> at iomem 
0xcd000-0xcdfff,0xdf000-0xdffff,0xe0000-0xe3fff pnpid ORM0000 on 
isa0                                                                                          

sc0: <System console> at flags 0x100 on 
isa0                                                   
sc0: VGA <16 virtual consoles, 
flags=0x300>                                                    
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on 
isa0                      
WARNING: ZFS is considered to be an experimental feature in 
FreeBSD.                           
Timecounter "TSC" frequency 1496255455 Hz quality 
800                                          
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me)
firewire0: bus manager 0
fwohci0: phy int
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
ZFS filesystem version 13
ZFS storage pool version 13
ad0: 114473MB <WDC WD1200BEVE-00UYT0 01.04A01> at ata0-master UDMA100
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
acd0: DVDR <NEC DVD+/-RW ND-6450A/2.36> at ata1-master PIO4
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 6 ports with 6 removable, self powered
Trying to mount root from zfs:h
ts_to_ct(1242284390.426544117) = [2009-05-14 06:59:50]
drm0: [MPSAFE]
drm0: [ITHREAD]

pciconf -lv

vgapci0@pci0:0:2:0:     class=0x030000 card=0x3080103c chip=0x35828086 
rev=0x02 hdr=0x00      
    vendor     = 'Intel 
Corporation'                                                          
    device     = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated 
Graphics Device'           
    class      = 
display                                                                       

    subclass   = 
VGA                                                                           

vgapci1@pci0:0:2:1:     class=0x038000 card=0x3080103c chip=0x35828086 
rev=0x02 hdr=0x00      
    vendor     = 'Intel 
Corporation'                                                          
    device     = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated 
Graphics Device'           
    class      = display    

/etc/drirc

<driconf>
        <device screen="0" driver="i915">
                <application name="Default">
                        <option name="vblank_mode" value="0" />
                </application>
        </device>
</driconf>

xorg.conf

Section 
"ServerLayout"                                                                         

        Identifier     "X.org 
Configured"                                                     
        Screen      0  "Screen0" 0 
0                                                          
        InputDevice    "Mouse0" 
"CorePointer"                                                 
        InputDevice    "Keyboard0" 
"CoreKeyboard"                                             
        Option         "AllowEmptyInput" 
"OFF"                                                
        Option         "AutoAddDevices"  
"OFF"                                                
EndSection                                                                                     


Section "Files"
        ModulePath   "/usr/local/lib/xorg/modules"
        FontPath     "/usr/local/lib/X11/fonts/misc/"
        FontPath     "/usr/local/lib/X11/fonts/TTF/"
        FontPath     "/usr/local/lib/X11/fonts/OTF" 
        FontPath     "/usr/local/lib/X11/fonts/Type1/"
        FontPath     "/usr/local/lib/X11/fonts/100dpi/"
        FontPath     "/usr/local/lib/X11/fonts/75dpi/"
        FontPath     "/usr/local/lib/X11/fonts/cyrillic"
        FontPath     "/usr/local/lib/X11/fonts/webfonts"
EndSection                                             

Section "ServerFlags"
        Option "AIGLX" "true"
EndSection                  

Section "Module"
        Load  "glx"
        Load  "dri2"
        Load  "dri"
        Load  "drm"
        Load  "vbe"
        Load  "GLcore"
        Load  "int10"
        Load  "record"
        Load  "dbe"  
        Load  "extmod"
        Load  "freetype"
        Load  "type1"  
EndSection             

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"     
        Option      "XkbRules" "xorg"
        Option      "XkbLayout" "us,ru(winkeys)"
        Option      "XkbOptions" "grp:alt_shift_toggle"
EndSection                                            

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/psm0"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection                                 

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection                          

Section "Monitor"
        Identifier   "Monitor1"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection                          

Section "Device"
        Option     "DRI2"                       # [<bool>]
        Option     "AccelMethod" "EXA"                   
        Identifier  "Card0"                              
        Option     "Tiling" "off"                        
        Driver      "intel"                              
        VendorName  "Intel Corporation"                  
        BoardName   "82852/855GM Integrated Graphics Device"
        BusID       "PCI:0:2:0"                            
#       Option      "NoAccel" "false"                      

EndSection

Section "Device"
        Option     "DRI2"                       # [<bool>]
        Option     "AccelMethod" "EXA"                   
        Option     "Tiling" "off"                        
        Identifier  "Card1"                              
        Driver      "intel"                              
        VendorName  "Intel Corporation"                  
        BoardName   "82852/855GM Integrated Graphics Device"
        BusID       "PCI:0:2:1"                            
#       Option      "NoAccel" "false"                      
EndSection                                                 

Section "Screen"
        Identifier "Screen0"
        Device     "Card0" 
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     1  
        EndSubSection        
        SubSection "Display" 
                Viewport   0 0
                Depth     4  
        EndSubSection        
        SubSection "Display" 
                Viewport   0 0
                Depth     8  
        EndSubSection        
        SubSection "Display" 
                Viewport   0 0
                Depth     15 
        EndSubSection        
        SubSection "Display" 
                Viewport   0 0
                Depth     16 
        EndSubSection        
        SubSection "Display" 
                Viewport   0 0
                Depth     24 
        EndSubSection        
EndSection                   

Section "Screen"
        Identifier "Screen1"
        Device     "Card1" 
        Monitor    "Monitor1"
        SubSection "Display"
                Viewport   0 0
                Depth     1  
        EndSubSection        
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Section "DRI"
        Mode 0666
EndSection

Section "Extensions"
        Option "Composite" "Enable"
EndSection

kldstat
Id Refs Address    Size     Name
 1   14 0x80400000 84cb24   kernel
 2    1 0x80c4d000 13eb44   zfs.ko
 3    2 0x80d8c000 3c68     opensolaris.ko
 4    1 0x80d90000 a470     i915.ko
 5    2 0x80d9b000 16e8c    drm.ko

-- 
Veniamin Gvozdikov
------------------------------------------
XMMP: zloidemon@jabber.ru

From oliver at FreeBSD.org  Thu May 14 15:26:58 2009
From: oliver at FreeBSD.org (Oliver Lehmann)
Date: Thu May 14 15:27:03 2009
Subject: Problem with OpenGL and ATI HD3850
In-Reply-To: <20090513203129.fb21a669.oliver@FreeBSD.org>
References: <20090429164113.f0b48048.lehmann@ans-netz.de>
	<20090429163843.GB370@slackbox.xs4all.nl>
	<18936.36210.823588.838523@gromit.timing.com>
	<20090430063454.969303d0.lehmann@ans-netz.de>
	<1241092672.3294.6.camel@localhost>
	<20090430122155.6643.qmail@avocado.salatschuessel.net>
	<18937.44531.88172.177326@gromit.timing.com>
	<20090430173416.042e03a8.oliver@FreeBSD.org>
	<20090513203129.fb21a669.oliver@FreeBSD.org>
Message-ID: <20090514172656.18fb4350.oliver@FreeBSD.org>

Hi,

talking with the ogre guy (I opened a bug report about that) He told me,
that True is hardcoded here when calling glXCreatecontextwithConfigSGIX
is set because:

"The implementation should know whether it can do direct rendering or
not, and fall back on X rendering if not, so True should always be a safe
option. The only reason to pass False is if you need to share the context
between processes. So this looks like an error in some part of your
installed software."

So if this is true, and regarding to

http://techpubs.sgi.com/library/tpl/cgi-bin/getdoc.cgi?db=man&fname=/usr/share/catman/g_man/cat3/OpenGL/glxcreatecontextwithconfigsgix.z

it looks like that, I wonder why the context returned by the function
when having no 3d support is not working. What is wrong with either the
drm for ATI, opengl or the glXCreatecontextwithConfigSGIX call?

Oliver Lehmann wrote:

> Oliver Lehmann wrote:
> 
> > A guy in the ogre forum told me that Ogre cannot be run with a Software 
> > Rasterizer - that might be the case but I still wonder why glGetString
> > isn't returning anything....
> 
> Ok,
> 
> I found out, that the glContext is getting somehow created wrong.
> It is created with
> 
> glxContext = glXCreateContextWithConfigSGIX(mGLDisplay, fbConfig,
> renderType, shareList, direct);
> 
> having direct alwasy be True and renderType GLX_RGBA_TYPE.
> Changing direct to False it gets a bit further and glGetString returns
> the requested information. (Then it still crashes with some framebuffer
> related message which I haven't looked at yet).
> 
> Can someone explain to me what the last parameter of
> glXCreateContextWithConfigSGIX is for and why True is not working here?
> glxContext is not NULL when True was specified.

-- 
 Oliver Lehmann
  http://www.pofo.de/
  http://wishlist.ans-netz.de/
From amdmi3 at amdmi3.ru  Thu May 14 16:17:32 2009
From: amdmi3 at amdmi3.ru (Dmitry Marakasov)
Date: Thu May 14 16:17:39 2009
Subject: xorg input (hald/AllowEmptyInput) confusion among users
Message-ID: <20090514154452.GA72873@hades.panopticon>

Hi!

After 7.2 release, I'm seeng a huge flow of new users trying FreeBSD.
This is great, but also I see a lot of questions regarding input
device configuring in xorg - I believe that really sploils first
FreeBSD experience for many users.

So, I've got a litte idea on how to improve the situation.

As I understand, currently user is required to do one of following:
- Make sure hald is running (if xorg is compiled with it)
- Add AllowEmptyInput "0" to xorg config otherwise

Thus, extra action is ALWAYS required from user.

The idea is to eliminate those.

The second case can be easily fixed by patching xorg to generate config
already with AllowEmptyInput included, in case it's built without
HAL support.

The first case is more complicated and only things I can come with are
hacks. For example, something like that:

xorg-server/Makefile:
	pre-isntall:
		${GREP} -q 'hald_enable.*[yY][eE][sS]' /etc/rc.conf || ( ${ECHO_CMD} "You should ..."; ${FALSE} )

xorg-server/pkg-install:
	/usr/local/etc/rc.d/hald start >/dev/null 2>&1

	if ! ps auxww | grep -v grep | grep -q hald; then
		echo "hald is not running..., you should"
	fi

Another solution is to make xorg server just run hald itself.

Any comments?

-- 
Dmitry Marakasov   .   55B5 0596 FF1E 8D84 5F56  9510 D35A 80DD F9D2 F77D
amdmi3@amdmi3.ru  ..:  jabber: amdmi3@jabber.ru    http://www.amdmi3.ru
From newsham at lava.net  Thu May 14 16:58:40 2009
From: newsham at lava.net (Tim Newsham)
Date: Thu May 14 16:58:47 2009
Subject: Error updating x11 port
Message-ID: <Pine.BSI.4.64.0905140655410.3133@malasada.lava.net>

I'm trying to update my ports and have had numerous errors surrounding
the update of the xorg package.  I was able to work through most of
them (I think), following comments in UPDATING and online, but I
still have an issue when it tries to remove the current version
(xorg-7.2) and install the new version:

# portupgrade -a
--->  Upgrading 'xorg-7.2' to 'xorg-7.4_2' (x11/xorg)
--->  Building '/usr/ports/x11/xorg'
===>  Cleaning for xorg-7.4_2
This is a meta-port, meaning that it just depends on its subparts of the 
port.
It won't build and install all the parts until you have typed make install
This port does not ensure things are upgraded; use portupgrade if you want 
to
upgrade X.Org.  If you simply type 'make install' it may use over 2GB to 
build
all of the subports.  You can install the ports singly if you are low on 
space.
===>  Extracting for xorg-7.4_2
===>  Patching for xorg-7.4_2
===>  Configuring for xorg-7.4_2
--->  Backing up the old version
tar: nil@comment ORIGIN:x11/xorg: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors.
pkg_create: make_dist: tar command failed with code 256
--->  Uninstalling the old version
--->  Deinstalling 'xorg-7.2'
pkg_delete: package 'xorg-7.2' doesn't have a prefix
** Listing the failed packages (-:ignored / *:skipped / !:failed)
         ! xorg-7.2      (pkg_delete failed)
** Listing the failed packages (-:ignored / *:skipped / !:failed)
         ! x11/xorg (xorg-7.2)   (uninstall error)


trying to uninstall with pkg_delete directly also fails:

# pkg_delete xorg-7.2
pkg_delete: package 'xorg-7.2' doesn't have a prefix


(I had earlier touched a few files in the pkg db directory for
+COMMENT and such to get past other "tar" errors in portupgrade,
but other than that, this is mostly "normal" port stuff.  I installed
with ports, I updated with ports, etc).

Tim Newsham
http://www.thenewsh.com/~newsham/
From alvest at brakiri.com  Thu May 14 23:03:57 2009
From: alvest at brakiri.com (Albert Vest)
Date: Thu May 14 23:04:03 2009
Subject: Repeatable X lockups
In-Reply-To: <3a142e750905131201u40a0bf62of627649efed0535@mail.gmail.com>
References: <4A0AFD10.5020402@gmail.com>
	<3a142e750905131201u40a0bf62of627649efed0535@mail.gmail.com>
Message-ID: <4A0C9D1A.8080405@brakiri.com>

Paul B. Mahol wrote:
> On 5/13/09, Jimmie James <jimmiejaz@gmail.com> wrote:

> One thing to note, I dont switch to console while DRI is active
> otherwise panic could happen(last time when I tested it with 915GM).

I've been experiencing something similar, not a panic but, whenever I 
switch to console (ctrl-f1?) and come back to X (ctrl-f9), my session 
goes away and a new XDM screen presents itself for a fresh login.

Might it have to do with my hardware?  I started using one of those 
"wide screen" displays (1440 x 900), about the same time my updates 
started showing "7.2-PRERELEASE" as version number, and it still happens 
with "7.2-STABLE".  All ports current (except OOO 3.0.0).

Still using the same Radeon 9100 "IGP" forced to PCI mode, if that might 
matter.

-- 
Albert Vest, Al Vest at Brakiri dot com
From andy.lavr at reactor-xg.kiev.ua  Fri May 15 06:40:34 2009
From: andy.lavr at reactor-xg.kiev.ua (Andrei V. Lavreniyuk)
Date: Fri May 15 06:40:46 2009
Subject: Patch add "Sapphire Radeon HD 4870 512MB DDR5" to radeonhd drivers
Message-ID: <4A0D0A26.9040503@reactor-xg.kiev.ua>

Hi!


View attached file - patch-rhd_id.c



Best regards, Andrei Lavreniyuk
-------------- next part --------------
--- rhd_id.c.orig	2009-04-03 12:51:50.000000000 +0300
+++ rhd_id.c	2009-05-15 09:19:43.286013717 +0300
@@ -853,6 +853,7 @@
     /* 0x958E : RV630 : ATI Radeon HD 2600 LE  */
     { 0x95c5, 0x1787, 0x2252, "PowerColor HD 3450", RHD_CARD_FLAG_HPDOFF, ID_CONNECTORINFO_EMPTY, DEVINFO_EMPTY },
     { 0x9610, 0x105B, 0x0E0F, "Foxconn A7GM-S (RS780)", RHD_CARD_FLAG_HPDOFF, ID_CONNECTORINFO_EMPTY, DEVINFO_EMPTY },
+    { 0x9440, 0x174B, 0x0502, "Sapphire Radeon HD 4870 512MB DDR5", RHD_CARD_FLAG_NONE, ID_CONNECTORINFO_EMPTY, DEVINFO_EMPTY },
     { 0, 0, 0, NULL, 0, ID_CONNECTORINFO_EMPTY, DEVINFO_EMPTY } /* KEEP THIS: End marker. */
 };
 
From andy.lavr at reactor-xg.kiev.ua  Fri May 15 06:40:35 2009
From: andy.lavr at reactor-xg.kiev.ua (Andrei V. Lavreniyuk)
Date: Fri May 15 06:40:46 2009
Subject: Part 2: Patch add "Sapphire Radeon HD 4870 512MB DDR5" to radeonhd
 drivers
Message-ID: <4A0D0B14.6010309@reactor-xg.kiev.ua>

Hi!


View attached file - patch-rhd_id.c


--- skip Xorg.0.log ---

(II) Setting vga for screen 0.
(**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Selected ShadowFB.
(--) RADEONHD(0): Detected an RV770 on a Sapphire Radeon HD 4870 512MB DDR5
(II) RADEONHD(0): Mapped IO @ 0xfbde0000 to 0x8006bd000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
         SubsystemVendorID: 0x174b SubsystemID: 0x0502
         IOBaseAddress: 0xc000
         Filename: 85nssc2.bin
         BIOS Bootup Message:
Wekiva RV770 B50701 Board


--- end skip ---




Best regards, Andrei Lavreniyuk
-------------- next part --------------
--- rhd_id.c.orig	2009-04-03 12:51:50.000000000 +0300
+++ rhd_id.c	2009-05-15 09:19:43.286013717 +0300
@@ -853,6 +853,7 @@
     /* 0x958E : RV630 : ATI Radeon HD 2600 LE  */
     { 0x95c5, 0x1787, 0x2252, "PowerColor HD 3450", RHD_CARD_FLAG_HPDOFF, ID_CONNECTORINFO_EMPTY, DEVINFO_EMPTY },
     { 0x9610, 0x105B, 0x0E0F, "Foxconn A7GM-S (RS780)", RHD_CARD_FLAG_HPDOFF, ID_CONNECTORINFO_EMPTY, DEVINFO_EMPTY },
+    { 0x9440, 0x174B, 0x0502, "Sapphire Radeon HD 4870 512MB DDR5", RHD_CARD_FLAG_NONE, ID_CONNECTORINFO_EMPTY, DEVINFO_EMPTY },
     { 0, 0, 0, NULL, 0, ID_CONNECTORINFO_EMPTY, DEVINFO_EMPTY } /* KEEP THIS: End marker. */
 };
 
From avg at icyb.net.ua  Fri May 15 13:21:07 2009
From: avg at icyb.net.ua (Andriy Gapon)
Date: Fri May 15 13:21:14 2009
Subject: stable/7, intel: troubles after vt swicth
Message-ID: <4A0D6C3D.8020400@icyb.net.ua>


This is amd64 stable/7 system from latest sources as of yesterday.
Hardware is integrated G33 on DG33TL motherboard.
Ports:
xorg-server-1.6.1,1
xf86-video-intel-2.7.0
Mesa/DRI ports are at 7.4.1_1

I have DRI, AIGLX, EXA enabled in xorg.conf.

Symptoms:
X works fine initially.
After vt-switching to console and back I see the following:
X becomes subjectively less responsive.
The most visible regression is rendering of text in konsole.
There seems to be zero interrupts generated for drm/vgapci driver, interrupt count
stays the same in vmstat -i output.
Moving mouse seems to speed up text rendering in konsole - strange but true.

I see the following in X log after the switch:
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) intel(0): xf86UnbindGARTMemory: unbind key 4
(II) intel(0): xf86UnbindGARTMemory: unbind key 6
(II) intel(0): xf86UnbindGARTMemory: unbind key 7
(II) intel(0): xf86UnbindGARTMemory: unbind key 8
(WW) intel(0): drmDropMaster failed: Unknown error: -1
(II) AIGLX: Resuming AIGLX clients after VT switch
(WW) intel(0): drmDropMaster failed: Unknown error: -1
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x006ff000 (pgoffset 1791)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x0082a000 (pgoffset 2090)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x0082b000 (pgoffset 2091)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 7 at 0x06000000 (pgoffset 24576)
(II) intel(0): xf86BindGARTMemory: bind key 8 at 0x07000000 (pgoffset 28672)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB)
(II) intel(0): 0x006ff000:            end of stolen memory
(II) intel(0): 0x0082a000-0x0082afff: overlay registers (4 kB)
(II) intel(0): 0x0082b000-0x0082bfff: HW status (4 kB)
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
(II) intel(0): 0x02000000-0x0475ffff: exa offscreen (40320 kB)
(II) intel(0): 0x05000000-0x05ffffff: back buffer (16384 kB) X tiled
(II) intel(0): 0x06000000-0x06ffffff: depth buffer (16384 kB) X tiled
(II) intel(0): 0x07000000-0x08ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(WW) intel(0): ESR is 0x00000011, page table error, instruction error
(WW) intel(0): PGTBL_ER is 0x00000003, host gtt pte, host pte data
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): [drm] mapped front buffer at 0xd1000000, handle = 0xd1000000
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is off
(II) intel(0):   Display plane B is now disabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output TMDS-1 is connected to pipe A
(II) intel(0): [drm] dma control initialized, using IRQ 256

Here's some output that I got from setting hw.dri.0.debug=1 for 0.3 seconds:
[drm:pid1932:drm_ioctl] pid=1932, cmd=0xc0086444, nr=0x44, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_emit_irq]
[drm:pid1932:drm_ioctl] pid=1932, cmd=0x80046445, nr=0x45, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_wait_irq] irq_nr=29161896 breadcrumb=29161896
[drm:pid1932:drm_ioctl] pid=1932, cmd=0x80206443, nr=0x43, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_batchbuffer] i915 batchbuffer, start 2e000 used 16280 cliprects 0
[drm:pid1932:drm_ioctl] pid=1932, cmd=0xc0086444, nr=0x44, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_emit_irq]
[drm:pid1932:drm_ioctl] pid=1932, cmd=0xc0086444, nr=0x44, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_emit_irq]
[drm:pid1932:drm_ioctl] pid=1932, cmd=0x80046445, nr=0x45, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_wait_irq] irq_nr=29161899 breadcrumb=29161899
[drm:pid1932:drm_ioctl] pid=1932, cmd=0x80206443, nr=0x43, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_batchbuffer] i915 batchbuffer, start 2a000 used 16256 cliprects 0
[drm:pid1932:drm_ioctl] pid=1932, cmd=0xc0086444, nr=0x44, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_emit_irq]
[drm:pid1932:drm_ioctl] pid=1932, cmd=0xc0086444, nr=0x44, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_emit_irq]
[drm:pid1932:drm_ioctl] pid=1932, cmd=0x80046445, nr=0x45, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_wait_irq] irq_nr=29161902 breadcrumb=29161902
[drm:pid1932:drm_ioctl] pid=1932, cmd=0x80206443, nr=0x43, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_batchbuffer] i915 batchbuffer, start 2e000 used 16232 cliprects 0
[drm:pid1932:drm_ioctl] pid=1932, cmd=0xc0086444, nr=0x44, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_emit_irq]
[drm:pid1932:drm_ioctl] pid=1932, cmd=0xc0086444, nr=0x44, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_emit_irq]
[drm:pid1932:drm_ioctl] pid=1932, cmd=0x80046445, nr=0x45, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_wait_irq] irq_nr=29161905 breadcrumb=29161905
[drm:pid1932:drm_ioctl] pid=1932, cmd=0x80206443, nr=0x43, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_batchbuffer] i915 batchbuffer, start 2a000 used 16280 cliprects 0
[drm:pid1932:drm_ioctl] pid=1932, cmd=0xc0086444, nr=0x44, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_emit_irq]
[drm:pid1932:drm_ioctl] pid=1932, cmd=0xc0086444, nr=0x44, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_emit_irq]
[drm:pid1932:drm_ioctl] pid=1932, cmd=0x80046445, nr=0x45, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_wait_irq] irq_nr=29161908 breadcrumb=29161908
[drm:pid1932:drm_ioctl] pid=1932, cmd=0x80206443, nr=0x43, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_batchbuffer] i915 batchbuffer, start 2e000 used 16304 cliprects 0
[drm:pid1932:drm_ioctl] pid=1932, cmd=0xc0086444, nr=0x44, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_emit_irq]
[drm:pid1932:drm_ioctl] pid=1932, cmd=0xc0086444, nr=0x44, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_emit_irq]
[drm:pid1932:drm_ioctl] pid=1932, cmd=0x80046445, nr=0x45, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_wait_irq] irq_nr=29161911 breadcrumb=29161911
[drm:pid1932:drm_ioctl] pid=1932, cmd=0x80206443, nr=0x43, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_batchbuffer] i915 batchbuffer, start 2a000 used 16304 cliprects 0
[drm:pid1932:drm_ioctl] pid=1932, cmd=0xc0086444, nr=0x44, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_emit_irq]
[drm:pid1932:drm_ioctl] pid=1932, cmd=0xc0086444, nr=0x44, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_emit_irq]
[drm:pid1932:drm_ioctl] pid=1932, cmd=0x80046445, nr=0x45, dev 0xffffff0001507800,
auth=1
[drm:pid1932:i915_wait_irq] irq_nr=29161914 breadcrumb=29161911
[drm:pid1932:i915_user_irq_get]
[drm:pid1932:i915_enable_irq] irq_enable_reg = 0xffffffaf, mask = 0x00000002


-- 
Andriy Gapon
From rnoland at FreeBSD.org  Fri May 15 13:27:39 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Fri May 15 13:27:45 2009
Subject: xorg input (hald/AllowEmptyInput) confusion among users
In-Reply-To: <20090514154452.GA72873@hades.panopticon>
References: <20090514154452.GA72873@hades.panopticon>
Message-ID: <1242393993.1755.77.camel@balrog.2hip.net>

On Thu, 2009-05-14 at 19:44 +0400, Dmitry Marakasov wrote:
> Hi!
> 
> After 7.2 release, I'm seeng a huge flow of new users trying FreeBSD.
> This is great, but also I see a lot of questions regarding input
> device configuring in xorg - I believe that really sploils first
> FreeBSD experience for many users.
> 
> So, I've got a litte idea on how to improve the situation.
> 
> As I understand, currently user is required to do one of following:
> - Make sure hald is running (if xorg is compiled with it)
> - Add AllowEmptyInput "0" to xorg config otherwise

If xorg-server is built without HAL support then the default is swapped
and you don't need to set this.  I also have come to prefer Option
"AutoAddDevices" "off" to AllowEmptyInput.  That disables all
hot-plugging.  I use gnome normally, so I generally just run moused and
let hald do it's thing.

> Thus, extra action is ALWAYS required from user.
> 
> The idea is to eliminate those.
> 
> The second case can be easily fixed by patching xorg to generate config
> already with AllowEmptyInput included, in case it's built without
> HAL support.

As stated above... If you de-select the HAL option on the port, the
default should get flipped.

> The first case is more complicated and only things I can come with are
> hacks. For example, something like that:
> 
> xorg-server/Makefile:
> 	pre-isntall:
> 		${GREP} -q 'hald_enable.*[yY][eE][sS]' /etc/rc.conf || ( ${ECHO_CMD} "You should ..."; ${FALSE} )

Something like this might be reasonable, patches welcome...

> xorg-server/pkg-install:
> 	/usr/local/etc/rc.d/hald start >/dev/null 2>&1
> 
> 	if ! ps auxww | grep -v grep | grep -q hald; then
> 		echo "hald is not running..., you should"
> 	fi

This might be overkill.  I don't like the idea of the port trying to
start other daemons... The message is fine though.

> Another solution is to make xorg server just run hald itself.

People start X in all sorts of ways... via startx, gdm using the rc
system, xdm or kdm from /etc/ttys.  So the only place to do this would
be in the xorg-server code, which isn't going to happen...

robert.

> Any comments?

-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090515/ffa2059c/attachment.pgp
From rnoland at FreeBSD.org  Fri May 15 13:54:22 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Fri May 15 13:54:28 2009
Subject: Repeatable X lockups
In-Reply-To: <4A0C9D1A.8080405@brakiri.com>
References: <4A0AFD10.5020402@gmail.com>
	<3a142e750905131201u40a0bf62of627649efed0535@mail.gmail.com>
	<4A0C9D1A.8080405@brakiri.com>
Message-ID: <1242395604.1755.82.camel@balrog.2hip.net>

On Thu, 2009-05-14 at 18:37 -0400, Albert Vest wrote:
> Paul B. Mahol wrote:
> > On 5/13/09, Jimmie James <jimmiejaz@gmail.com> wrote:
> 
> > One thing to note, I dont switch to console while DRI is active
> > otherwise panic could happen(last time when I tested it with 915GM).
> 
> I've been experiencing something similar, not a panic but, whenever I 
> switch to console (ctrl-f1?) and come back to X (ctrl-f9), my session 
> goes away and a new XDM screen presents itself for a fresh login.

This sounds like the xserver is crashing.

> Might it have to do with my hardware?  I started using one of those 
> "wide screen" displays (1440 x 900), about the same time my updates 
> started showing "7.2-PRERELEASE" as version number, and it still happens 
> with "7.2-STABLE".  All ports current (except OOO 3.0.0).
> 
> Still using the same Radeon 9100 "IGP" forced to PCI mode, if that might 
> matter.

Does it detect as AGP natively?

robert.

-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090515/67449405/attachment.pgp
From tevans.uk at googlemail.com  Fri May 15 19:42:17 2009
From: tevans.uk at googlemail.com (Tom Evans)
Date: Fri May 15 19:42:24 2009
Subject: Xorg 1.6.0 uses 100% CPU in gnome+gdm
Message-ID: <1242416473.14085.5.camel@localhost>

Hi all

I upgraded kernel, world and ports from ~7.1 RELEASE to RELENG_7 of
yesterday, and now Xorg constantly chews CPU. I'm running:

FreeBSD jacob.nubtek.com 7.2-STABLE FreeBSD 7.2-STABLE #2: Thu May 14
20:37:49 BST 2009
root@jacob.nubtek.com:/usr/obj/usr/data/FreeBSD/RELENG_7/src/sys/LOST
i386

I've double checked that all ports are up to date, and was going to
blame some bug in the nvidia binary driver, but it also exhibits it if I
use the 'nv' or 'vesa' driver as well - I've not tested nouveau. The
nvidia.ko module was loaded whilst running with nv and vesa, would that
matter?

I tried disabling any/all of the extensions (damage, composite etc - see
xorg.conf for full list) but this had no effect. I also checked to see
if there what difference there was between a full gnome session, just
gdm, and just twm. There was no difference between a full gnome session
and just gdm, it still used 100% CPU, but just running 'Xorg
-config /etc/X11/xorg.conf', without running any wm at all, used
virtually no CPU.

I'm running hald and dbus.

All relevant logs/conf files/pkg lists can be got at here [1]. Any
hints/ideas, as the sound of my fan whirling constantly is driving me
nuts!

Please keep me cc'ed, I'm not on freebsd-gnome@

Cheers

Tom

[1] http://freebsd.nubtek.com/files/xorg/

From kstewart at owt.com  Fri May 15 20:34:04 2009
From: kstewart at owt.com (Kent Stewart)
Date: Fri May 15 20:34:10 2009
Subject: Xorg 1.6.0 uses 100% CPU in gnome+gdm
In-Reply-To: <1242416473.14085.5.camel@localhost>
References: <1242416473.14085.5.camel@localhost>
Message-ID: <200905151314.01390.kstewart@owt.com>

On Friday 15 May 2009 12:41:13 pm Tom Evans wrote:
> Hi all
>
> I upgraded kernel, world and ports from ~7.1 RELEASE to RELENG_7 of
> yesterday, and now Xorg constantly chews CPU. I'm running:
>
> FreeBSD jacob.nubtek.com 7.2-STABLE FreeBSD 7.2-STABLE #2: Thu May 14
> 20:37:49 BST 2009
> root@jacob.nubtek.com:/usr/obj/usr/data/FreeBSD/RELENG_7/src/sys/LOST
> i386
>
> I've double checked that all ports are up to date, and was going to
> blame some bug in the nvidia binary driver, but it also exhibits it if I
> use the 'nv' or 'vesa' driver as well - I've not tested nouveau. The
> nvidia.ko module was loaded whilst running with nv and vesa, would that
> matter?
>

I have had this happen several times. It always went away after I force built 
xorg and its dependancies. My personal opinion is that something was built 
out of order and while your ports may be current, something used an old 
linkage.

Kent

-- 
Kent Stewart
Richland, WA

http://users.owt.com/kstewart/index.html

From tevans.uk at googlemail.com  Fri May 15 20:38:34 2009
From: tevans.uk at googlemail.com (Tom Evans)
Date: Fri May 15 20:39:46 2009
Subject: Xorg 1.6.0 uses 100% CPU in gnome+gdm
In-Reply-To: <200905151314.01390.kstewart@owt.com>
References: <1242416473.14085.5.camel@localhost>
	<200905151314.01390.kstewart@owt.com>
Message-ID: <1242419844.14339.1.camel@localhost>

On Fri, 2009-05-15 at 13:14 -0700, Kent Stewart wrote:
> On Friday 15 May 2009 12:41:13 pm Tom Evans wrote:
> > Hi all
> >
> > I upgraded kernel, world and ports from ~7.1 RELEASE to RELENG_7 of
> > yesterday, and now Xorg constantly chews CPU. I'm running:
> >
> > FreeBSD jacob.nubtek.com 7.2-STABLE FreeBSD 7.2-STABLE #2: Thu May 14
> > 20:37:49 BST 2009
> > root@jacob.nubtek.com:/usr/obj/usr/data/FreeBSD/RELENG_7/src/sys/LOST
> > i386
> >
> > I've double checked that all ports are up to date, and was going to
> > blame some bug in the nvidia binary driver, but it also exhibits it if I
> > use the 'nv' or 'vesa' driver as well - I've not tested nouveau. The
> > nvidia.ko module was loaded whilst running with nv and vesa, would that
> > matter?
> >
> 
> I have had this happen several times. It always went away after I force built 
> xorg and its dependancies. My personal opinion is that something was built 
> out of order and while your ports may be current, something used an old 
> linkage.
> 
> Kent
> 

meh - ok, another `portupgrade -Rf '*xorg*'` kicked off.

Thanks for the tip.

Cheers

tom

From peterjeremy at optushome.com.au  Fri May 15 23:23:54 2009
From: peterjeremy at optushome.com.au (Peter Jeremy)
Date: Fri May 15 23:24:02 2009
Subject: Whither X?
Message-ID: <20090515232350.GH57001@server.vk2pj.dyndns.org>

Am I the only person who thinks the X.Org Project has lost its way (or
at least lost sight of its user community)?  Ever since X.org 6.9,
successive releases of X.org have provided regressions and POLA
violations.

Whilst the X.Org Project has been adding native support for newer
GPUs, it has been doing so at the cost of basic functionality: If you
happen to be one of the lucky ones who gets the incantations and
sacrifices right then you might have accelerated 3D on your new
graphics card.  More likely, it will hang your system if you try to
use it, or you won't be able to use X at all - even on cards that used
to work.

The transition from X.org 6.9 to X.org 7.0 added no new functionality.
It just split X into several hundred pieces and massively increased
the build time.  The justification was that bugs in one component
could be corrected by just rebuilding that component.  The reality has
been that the concepts of regression testing and integration testing
have gone out the door and new versions of arbitrary components (which
may or may not be API/ABI compatible with previous versions) are just
dumped on the user community.

The biggest regression in 7.0 was the switch from imake to GNU
configure.  Whilst GNU configure is promoted as a portability aid,
anyone who attempts to port code to (eg) FreeBSD or Solaris will
quickly discover that the reality is completely the opposite - the
input language is so arcane it needs two levels of pre-processing by
custom tools before it can be handled by standard tools and it
generally provides a long-term, distributed memory for disinformation
(eg "the native object format for FreeBSD is a.out and objformat can
be used to check for ELF").  The appallingly bad performance of
configure (for some X components, configure takes 4-5 times as long to
run as the actual compilation), combined with the massive increase in
the number of pieces caused a massive increase in compilation time.
The FreeBSD performance was further worsened by the (known) poor
scaling of the packaging tools to large numbers of ports and
dependencies (stock xorg currently has ~250 build dependencies and
over 200 run dependencies).

X.org 7.1 was never commited into the ports tree and I don't have
any record of specific problems with X.org 7.2.

X.org 7.3 introduced another major set of regressions:
- hard-wired modelines that can't be disabled without patching the
  source code (though this may be been broken earlier than 7.3).
- xdm config files installed into the wrong directory
- Broken files installed into /usr/local/lib/X11/xdm
- Corrupt xdm/Xresources file installed
- Display corruption when VTY/X11 switching on an ATI Radeon XPRESS 200M
- system clock occasionally loses a second during a VTY/X11 switch
- DPMS display off/on can corrupt display on ATI X200M.
- Use-after-free error causes Xserver to consistently abort() on exit
- Keyboard LEDs stopped working
- Scroll wheel stopped working
- HW cursor and DPMS broken on MGA G550
- excessive gettimeofday() calls due to a configure bug

Many of them were subsequently fixed and some were problems in the
FreeBSD ports rather than the underlying X.org but it is unfortunate
that the code was committed to the ports tree before being fixed.

Somewhat after X.org 7.3 was committed, having followed the pain felt
by many others as well as having experienced problems myself, I wrote:
"Having followed X within FreeBSD from XFree86 3.1.2 through to X.org
7.3, I can safely say that X.org 7.3 is by far the worst version as
far as POLA violations and regressions are concerned."

Well, that was before X.org 7.4 was released - which set a new record
for brokenness.

So far, X.org 7.x releases have focused on the server.  X.org 7.4 adds
new client side functionality - with a new "Generic Event Extension".
Unfortunately, this was done before server support was ready - leading
to a stream of warnings that can't be suppressed.  (I had a look at the
code and it is carefully crafted to make suppression almost impossible).

Another new misfeature in X.org 7.4 is the use of dbus/hal.  I have
yet to find any rationale for using hal in an Xserver - hot-plugging
both keyboards and mice "just works" in FreeBSD and I've yet to see
any equipment that allows hot-plugging graphics cards.

Whilst trying to rebuild just parts of X, I've also discovered that
the dependency checks are wrong - eg, I can uninstall libxcb and all
its dependencies.  When I then try to build xorg-server, it dies
inside the graphics/dri configure script reporting that x11-xcb is
missing.  This shouldn't happen.

There were the usual POLA violations:
- xdm, xconsole, xload, xlsfonts, xmag (and others) were silently
  dropped from x11-apps
- The "DontZap" default was quietly reversed, meaning Ctrl-Alt-BS no
  longer works by default.
- Only one graphics card is supported.

But the worst problem is that for many people, including myself, the
Xserver just doesn't work at all.  For the first time since at least
FreeBSD 2.x, FreeBSD 7.2 has shipped with an Xserver that won't work
for a significant number of people (as the mailing lists are beginning
to reveal).

The most common failure modes I've seen is that the Xserver just
presents a completely blank screen - and all you can do is kill the
Xserver.  On occasion, I have managed to make the Xserver crash with
unresolved symbols (this appears to be the result of incorrect and/or
inadequate dynamic linkage information in some modules resulting in
required shared objects not being loaded in some cases).

And this occurs across a variety of hardware - i945, ATI X200M, ATI
Radeon HD2400, with both FreeBSD 7.2-stable and recent 8-current on
both i386 and amd64.  I've tried building xorg from scratch both with
and without HAL.  I've tried installing the Xorg packages that shipped
with FreeBSD 7.2 - and none of it works for me.

So far, the only thing I've found that works is to revert the
xorg-server and x11-drivers ports to 2009-Apr-01.  (Though this leaves
me without DRI on my HD2400).

As I stated when the xorg 7.3 debacle was foisted on users: "Maybe the
Xorg sub-project needs to get some input from the Gnome and KDE
sub-projects.  Both these groups manage to upgrade their ports without
regularly breaking everything."  Unfortunately, nothing has been done
and xorg is now worse than ever.

-- 
Peter Jeremy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090515/78ce7c95/attachment.pgp
From rnoland at FreeBSD.org  Sat May 16 00:29:26 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Sat May 16 00:29:45 2009
Subject: Whither X?
In-Reply-To: <20090515232350.GH57001@server.vk2pj.dyndns.org>
References: <20090515232350.GH57001@server.vk2pj.dyndns.org>
Message-ID: <1242433708.5638.26.camel@balrog.2hip.net>

On Sat, 2009-05-16 at 09:23 +1000, Peter Jeremy wrote:
> Am I the only person who thinks the X.Org Project has lost its way (or
> at least lost sight of its user community)?  Ever since X.org 6.9,
> successive releases of X.org have provided regressions and POLA
> violations.
> 
> Whilst the X.Org Project has been adding native support for newer
> GPUs, it has been doing so at the cost of basic functionality: If you
> happen to be one of the lucky ones who gets the incantations and
> sacrifices right then you might have accelerated 3D on your new
> graphics card.  More likely, it will hang your system if you try to
> use it, or you won't be able to use X at all - even on cards that used
> to work.
> 
> The transition from X.org 6.9 to X.org 7.0 added no new functionality.
> It just split X into several hundred pieces and massively increased
> the build time.  The justification was that bugs in one component
> could be corrected by just rebuilding that component.  The reality has
> been that the concepts of regression testing and integration testing
> have gone out the door and new versions of arbitrary components (which
> may or may not be API/ABI compatible with previous versions) are just
> dumped on the user community.
> 
> The biggest regression in 7.0 was the switch from imake to GNU
> configure.  Whilst GNU configure is promoted as a portability aid,
> anyone who attempts to port code to (eg) FreeBSD or Solaris will
> quickly discover that the reality is completely the opposite - the
> input language is so arcane it needs two levels of pre-processing by
> custom tools before it can be handled by standard tools and it
> generally provides a long-term, distributed memory for disinformation
> (eg "the native object format for FreeBSD is a.out and objformat can
> be used to check for ELF").  The appallingly bad performance of
> configure (for some X components, configure takes 4-5 times as long to
> run as the actual compilation), combined with the massive increase in
> the number of pieces caused a massive increase in compilation time.
> The FreeBSD performance was further worsened by the (known) poor
> scaling of the packaging tools to large numbers of ports and
> dependencies (stock xorg currently has ~250 build dependencies and
> over 200 run dependencies).
> 
> X.org 7.1 was never commited into the ports tree and I don't have
> any record of specific problems with X.org 7.2.
> 
> X.org 7.3 introduced another major set of regressions:
> - hard-wired modelines that can't be disabled without patching the
>   source code (though this may be been broken earlier than 7.3).
> - xdm config files installed into the wrong directory
> - Broken files installed into /usr/local/lib/X11/xdm
> - Corrupt xdm/Xresources file installed
> - Display corruption when VTY/X11 switching on an ATI Radeon XPRESS 200M
> - system clock occasionally loses a second during a VTY/X11 switch
> - DPMS display off/on can corrupt display on ATI X200M.
> - Use-after-free error causes Xserver to consistently abort() on exit
> - Keyboard LEDs stopped working
> - Scroll wheel stopped working
> - HW cursor and DPMS broken on MGA G550
> - excessive gettimeofday() calls due to a configure bug
> 
> Many of them were subsequently fixed and some were problems in the
> FreeBSD ports rather than the underlying X.org but it is unfortunate
> that the code was committed to the ports tree before being fixed.
> 
> Somewhat after X.org 7.3 was committed, having followed the pain felt
> by many others as well as having experienced problems myself, I wrote:
> "Having followed X within FreeBSD from XFree86 3.1.2 through to X.org
> 7.3, I can safely say that X.org 7.3 is by far the worst version as
> far as POLA violations and regressions are concerned."
> 
> Well, that was before X.org 7.4 was released - which set a new record
> for brokenness.
> 
> So far, X.org 7.x releases have focused on the server.  X.org 7.4 adds
> new client side functionality - with a new "Generic Event Extension".
> Unfortunately, this was done before server support was ready - leading
> to a stream of warnings that can't be suppressed.  (I had a look at the
> code and it is carefully crafted to make suppression almost impossible).
> 
> Another new misfeature in X.org 7.4 is the use of dbus/hal.  I have
> yet to find any rationale for using hal in an Xserver - hot-plugging
> both keyboards and mice "just works" in FreeBSD and I've yet to see
> any equipment that allows hot-plugging graphics cards.
> 
> Whilst trying to rebuild just parts of X, I've also discovered that
> the dependency checks are wrong - eg, I can uninstall libxcb and all
> its dependencies.  When I then try to build xorg-server, it dies
> inside the graphics/dri configure script reporting that x11-xcb is
> missing.  This shouldn't happen.
> 
> There were the usual POLA violations:
> - xdm, xconsole, xload, xlsfonts, xmag (and others) were silently
>   dropped from x11-apps
> - The "DontZap" default was quietly reversed, meaning Ctrl-Alt-BS no
>   longer works by default.
> - Only one graphics card is supported.
> 
> But the worst problem is that for many people, including myself, the
> Xserver just doesn't work at all.  For the first time since at least
> FreeBSD 2.x, FreeBSD 7.2 has shipped with an Xserver that won't work
> for a significant number of people (as the mailing lists are beginning
> to reveal).
> 
> The most common failure modes I've seen is that the Xserver just
> presents a completely blank screen - and all you can do is kill the
> Xserver.  On occasion, I have managed to make the Xserver crash with
> unresolved symbols (this appears to be the result of incorrect and/or
> inadequate dynamic linkage information in some modules resulting in
> required shared objects not being loaded in some cases).
> 
> And this occurs across a variety of hardware - i945, ATI X200M, ATI
> Radeon HD2400, with both FreeBSD 7.2-stable and recent 8-current on
> both i386 and amd64.  I've tried building xorg from scratch both with
> and without HAL.  I've tried installing the Xorg packages that shipped
> with FreeBSD 7.2 - and none of it works for me.
> 
> So far, the only thing I've found that works is to revert the
> xorg-server and x11-drivers ports to 2009-Apr-01.  (Though this leaves
> me without DRI on my HD2400).
> 
> As I stated when the xorg 7.3 debacle was foisted on users: "Maybe the
> Xorg sub-project needs to get some input from the Gnome and KDE
> sub-projects.  Both these groups manage to upgrade their ports without
> regularly breaking everything."  Unfortunately, nothing has been done
> and xorg is now worse than ever.

You failed to mention that I am essentially the only person maintaining
Xorg, drm, Mesa (libGL, dri, etc...) and at least some subset of agp.
Even with my hardware arsenal having improved dramatically in recent
months, I am only one person...  Some of the issues that you raise are
Xorg in general, while some are porting issues.  Since I don't see
patches attached, I have to assume that you are ok with that.  On the
one hand you want drm/dri support for the HD2400, yet you don't seem to
want any code changes.  Intel is on the brink of just not working at all
if I don't get at least GEM ported.  I can not and will not try to do a
full regression test on every card/driver that exists.  Many drivers for
older hardware are simply unmaintained and it's lucky if they still
compile.  Issues may be addressed with these drivers if they are raised,
but if bugs aren't filed on freedesktop.org, then they just bitrot and
die.

While we do experience some pain, I think that stating that "X just
doesn't work for a significant number of users" is a bit dramatic.  Most
issues that I run across are pilot error and while I agree that work
could be done to help improve that situation either with documentation
or additional work on the ports.  I just simply can't do more than I'm
doing now...

Some of the POLA issues that you raise have been discussed on Xorg lists
and have valid reasons for the changes, for at least some value of
valid.  The change to libpciaccess is what broke multi-card setups, but
would you argue that the xserver should be doing os specific frobbing of
the pci bus?  While this particular issue is being worked on again
lately, the overall number of users that it effects is relatively small.

While FreeBSD does support hot-plugging of mice via moused, it doesn't
support any other types of input devices.  It also doesn't allow for the
individual input devices to have different properties or be managed
independently for different screens or servers.  The same goes for
kbdmux.

robert.

-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090516/71b2d65b/attachment.pgp
From peterjeremy at optushome.com.au  Sat May 16 11:09:42 2009
From: peterjeremy at optushome.com.au (Peter Jeremy)
Date: Sat May 16 11:09:49 2009
Subject: Whither X?
In-Reply-To: <1242433708.5638.26.camel@balrog.2hip.net>
References: <20090515232350.GH57001@server.vk2pj.dyndns.org>
	<1242433708.5638.26.camel@balrog.2hip.net>
Message-ID: <20090516110938.GA16230@server.vk2pj.dyndns.org>

On 2009-May-15 19:28:28 -0500, Robert Noland <rnoland@FreeBSD.org> wrote:
>> The most common failure modes I've seen is that the Xserver just
>> presents a completely blank screen - and all you can do is kill the
>> Xserver.

It turns out this is another POLA violation, rather than a broken X
server.  It seems that a totally blank/black screen is the new (poorly
documented) standard and you need to use the '-retro' option to get
anything to display by default.

>You failed to mention that I am essentially the only person maintaining
>Xorg, drm, Mesa (libGL, dri, etc...) and at least some subset of agp.

Possibly because I wasn't aware.  Given how important X is to desktop
users, it's unreasonable to expect one person to carry the load
(though, having said that, I can't offer to help because I've already
over-committed my free time to other areas).  I agree that you do an
excellent job.  My mail was written in frustration (and I know I'm not
the only person who is frustrated with Xorg) at making no progress for
more than a month.

>months, I am only one person...  Some of the issues that you raise are
>Xorg in general, while some are porting issues.

The most aggravating issue is the lack of documentation - the commit
to xorg-apps made no mention of the removal of a large number of
clients and neither did UPDATING.  There has been no mention of the
changes in X.org 7.4 (other than dribs and drabs here).  It appears
that the X11 Configuration chapter of the handbook was updated to
cover Xorg 7.4 a couple of weeks ago but that wasn't mentioned here
until today.

>  Since I don't see
>patches attached, I have to assume that you are ok with that.

I have previously provided patches to correct an Xserver bug (the PR
is still open) and will continue to provide patches as I get time.  I
have also tested patches supplied by others where relevant and have
previously requested that you circulate patchsets for testing major
Xorg upgrades before committing them.  I am happy to run experimental
code and find/fix bugs when I know it's experimental.  I'm not happy
when I run what is supposed to be production code and it doesn't work
as expected for no obvious reason.  Unfortunately, my free time is
limited and having wasted at least a week tracking down the latest
POLA violation means I have lost a week of work that I could have used
to write patches on Xorg or other projects I am trying to work on.

>  On the
>one hand you want drm/dri support for the HD2400, yet you don't seem to
>want any code changes.

I am not saying that.  I am saying that the Xorg project needs to stop
breaking existing functionality and unnecessarily changing existing
behaviour.  Things like inverting the sense of "DontZap" or making the
default screen blank with no cursor have no benefit and just waste
people's time.

>  Intel is on the brink of just not working at all
>if I don't get at least GEM ported.

I've seen references to GEM (and messages about it not existing) but
don't know anything about it.  What is it and what is involved in
porting it?

>  I can not and will not try to do a
>full regression test on every card/driver that exists.

I'm not expecting you to do this.  It would be nice if the Xorg
project did some regression testing though

>  Many drivers for
>older hardware are simply unmaintained and it's lucky if they still
>compile.

I've not even tried using Xorg 7.4 on "older hardware" yet - my concern
is that Xorg appear to be unnecessarily changing things (and this will
obviously increase the risk of bitrot).

>While we do experience some pain, I think that stating that "X just
>doesn't work for a significant number of users" is a bit dramatic.  Most
>issues that I run across are pilot error

It seems that Xorg 7.4 has made a number of radical changes to a large
number of different areas - resulting in configuration options
interacting in ways that are people aren't expecting.  Whilst it could
be called "pilot error", the lack of documentation doesn't help.  I
know I reported "blank screen on startup" and asked for help a month
ago - whilst you did respond, you didn't actually mention that this
was now the expected behaviour.

> and while I agree that work
>could be done to help improve that situation either with documentation

I am not blaming you.  XFree86 was fairly well documented.
Unfortunately, most of the Xorg documentation was inherited from
XFree86 and doesn't seem to have been touched since.  An excellent
example is the Xorg 7.4 page - http://www.x.org/wiki/Releases/7.4 -
it contains a link to 'ChangeLog' but the target page doesn't exist.
It talks about per-module changelogs but provides no indication as
to how to find them.

>  The change to libpciaccess is what broke multi-card setups, but
>would you argue that the xserver should be doing os specific frobbing of
>the pci bus?

This is a classic example of an unnecessary regression - the existing
code worked but was replaced with new code that isn't ready yet.  I
agree that libpciaccess appears to be the way to go but it shouldn't
be the default in a 'stable'/'production' release of Xorg until it
provides at least equivalent functionality.

>While FreeBSD does support hot-plugging of mice via moused, it doesn't
>support any other types of input devices.

Actually, hot-plugging keyboards _is_ supported and works according
to some testing last night.

>  It also doesn't allow for the
>individual input devices to have different properties or be managed
>independently for different screens or servers.

Well, due to the libpciaccess bungle, you can't have multiple servers
any longer so that just leaves different screens.  And I would suggest
that the number of people who use input devices other than mouse or
keyboard (note that these are the only devices installed by the xorg
meta-port) and/or want them to have different properties for different
screens is vanishingly small.

-- 
Peter Jeremy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090516/cbe72a50/attachment.pgp
From adamk at voicenet.com  Sat May 16 11:30:19 2009
From: adamk at voicenet.com (Adam K Kirchhoff)
Date: Sat May 16 11:30:26 2009
Subject: Whither X?
In-Reply-To: <20090516110938.GA16230@server.vk2pj.dyndns.org>
References: <20090515232350.GH57001@server.vk2pj.dyndns.org>
	<1242433708.5638.26.camel@balrog.2hip.net>
	<20090516110938.GA16230@server.vk2pj.dyndns.org>
Message-ID: <20090516073016.414a683b@sorrow.ashke.com>

On Sat, 16 May 2009 21:09:38 +1000
Peter Jeremy <peterjeremy@optushome.com.au> wrote:

<snip>

> I am not saying that.  I am saying that the Xorg project needs to stop
> breaking existing functionality and unnecessarily changing existing
> behaviour.  Things like inverting the sense of "DontZap" or making the
> default screen blank with no cursor have no benefit and just waste
> people's time.

That hs been discussed a number of times on various mailing lists and
forums.  You should really politely take up that decision up with the
Xorg folks.  Complaining on here isn't going to do any good (though,
very likely, complaining on the Xorg mailing list won't either, but at
least that's a more applicable place).

<snip>
> I'm not expecting you to do this.  It would be nice if the Xorg
> project did some regression testing though

They do.  Probably much more than you realize.  Bear in mind one
important thing, though...  For the most part, they are all using
Linux, not FreeBSD.  They either use Linux because they want to or, for
quite a few developers, because hardware vendors pay them to.  AMD and
Intel pay open source developers to write Linux drivers and to improve
the Xorg stack for their linux users.  Thankfully we have someone like
Robert who is working so hard on trying to maintain a level playing
field.

Adam
From james at mansionfamily.plus.com  Sat May 16 12:00:49 2009
From: james at mansionfamily.plus.com (James Mansion)
Date: Sat May 16 12:00:56 2009
Subject: Whither X?
In-Reply-To: <1242433708.5638.26.camel@balrog.2hip.net>
References: <20090515232350.GH57001@server.vk2pj.dyndns.org>
	<1242433708.5638.26.camel@balrog.2hip.net>
Message-ID: <4A0EA410.5020909@mansionfamily.plus.com>

Robert Noland wrote:
> Xorg in general, while some are porting issues.  Since I don't see
> patches attached, I have to assume that you are ok with that.  On the
>   
I thought in general people had grown out of 'send me the patches' but 
clearly not.  Is it
not OK to be just a user, and to complain when the system regresses?

> Some of the POLA issues that you raise have been discussed on Xorg lists
> and have valid reasons for the changes, for at least some value of
> valid.  The change to libpciaccess is what broke multi-card setups, but
> would you argue that the xserver should be doing os specific frobbing of
> the pci bus?  While this particular issue is being worked on again
> lately, the overall number of users that it effects is relatively small.
>
>   
 From the point of view of a dispassionate observer, it does seem that 
X.org has moved slowly
but significantly from an attempt to keep all its user communities happy 
to focussing greatly
on Linux and caring little if *BSD and *Solaris lack the resources to 
keep up trying to emulate
design decisions that are Linux-centric, then that's just tough.  Or so 
it seems.

I don't think anyone can blame you for being a bit defensive Robert.  
The problem is
with X.org.  Upstream need to be honest with everyone about how much 
they care about
some of their users.

Maybe we will all come to regret that no-one seemed interested in taking 
the old Scitech
SNAP product further when they gave up on it.

(http://www.scitechsoft.com/news/press/sale_of_snap.html)


Perhaps the answer is to step back and consider whether something akin 
to the emulation
that allows Windows NDIS drivers to run could be fashioned to allow 
Windows graphics
drivers to run - perhaps using recent virtualisation advances to limit 
the damage they can
do.  While politically painful on some levels, it does provide for a 
functional binary
compatibility abstraction.  Pretty soon most of us will have desktop 
devices that handle the
new x86 virtualization features and it becomes increasingly pointless to 
hang onto old
X terms when you can get hardware like an Aspire Revo for peanuts.

I've not looked at building X recently, but if the new build system is 
so bad, then why
not replace it?  waf seems handy to me.  Its a lot faster than scons, 
handy to script in
Python, and can handle configuration tasks etc.

James

From romain at blogreen.org  Sat May 16 12:02:33 2009
From: romain at blogreen.org (Romain =?iso-8859-1?Q?Tarti=E8re?=)
Date: Sat May 16 12:02:40 2009
Subject: Whither X?
In-Reply-To: <20090516110938.GA16230@server.vk2pj.dyndns.org>
References: <20090515232350.GH57001@server.vk2pj.dyndns.org>
	<1242433708.5638.26.camel@balrog.2hip.net>
	<20090516110938.GA16230@server.vk2pj.dyndns.org>
Message-ID: <20090516120213.GA54128@blogreen.org>

Hi

On Sat, May 16, 2009 at 09:09:38PM +1000, Peter Jeremy wrote:
> On 2009-May-15 19:28:28 -0500, Robert Noland <rnoland@FreeBSD.org> wrote:
> > Intel is on the brink of just not working at all if I don't get at
> > least GEM ported.
> 
> I've seen references to GEM (and messages about it not existing) but
> don't know anything about it.  What is it and what is involved in
> porting it?

I read this article just a few days ago:
http://www.freesoftwaremagazine.com/columns/the_new_xorg_features
It gives general information about GEM (I did not know anything about it
before).

Some pointers are also available on wikipedia:
http://en.wikipedia.org/wiki/Graphics_Execution_Manager

This may help you to figure out what is GEM.  For your second questions
however, I have no answer to provide.

Regards,
Romain

-- 
Romain Tarti?re <romain@blogreen.org>        http://romain.blogreen.org/
pgp: 8DAB A124 0DA4 7024 F82A  E748 D8E9 A33F FF56 FF43 (ID: 0xFF56FF43)
(plain text =non-HTML= PGP/GPG encrypted/signed e-mail much appreciated)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090516/86b25c1b/attachment.pgp
From edwin at FreeBSD.org  Sat May 16 12:40:14 2009
From: edwin at FreeBSD.org (edwin@FreeBSD.org)
Date: Sat May 16 12:40:30 2009
Subject: ports/134576: [patch] x11-drivers/xf86-video-nouveau: update to
	recent snapshot, 20090514.9656762
Message-ID: <200905161240.n4GCeD8c017164@freefall.freebsd.org>

Synopsis: [patch] x11-drivers/xf86-video-nouveau: update to recent snapshot, 20090514.9656762

Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-x11
Responsible-Changed-By: edwin
Responsible-Changed-When: Sat May 16 12:40:13 UTC 2009
Responsible-Changed-Why: 
Over to maintainer (via the GNATS Auto Assign Tool)

http://www.freebsd.org/cgi/query-pr.cgi?pr=134576
From me at janh.de  Sat May 16 12:45:17 2009
From: me at janh.de (Jan Henrik Sylvester)
Date: Sat May 16 12:45:23 2009
Subject: Whither X?
References: 20090516110938.GA16230@server.vk2pj.dyndns.org
Message-ID: <4A0EB261.5060707@janh.de>

Peter Jeremy wrote:
> On 2009-May-15 19:28:28 -0500, Robert Noland <rnoland at FreeBSD.org> wrote:
>>While FreeBSD does support hot-plugging of mice via moused, it doesn't
>>support any other types of input devices.
> 
> Actually, hot-plugging keyboards _is_ supported and works according
> to some testing last night.

There are other common input devices than keyboards and plain mice. I 
guess I am not the only laptop user with a Synaptics Touchpad that has 
so much more functionality with the xorg driver than with the one of 
FreeBSD. At the same time I would like to be able to attach and remove 
my usb mouse at any time.

The way the configuration has to be setup for this to work changed a 
couple of times from xorg 6.9 to the current version -- it was sometimes 
pretty hard to get the information. Anyhow, considering how difficult 
such a common setup was (and still is) to make work, I think xorg is 
going in the right direction overall. (I have not been able to change 
from the classic configuration with the devices configured in xorg.conf 
to the new order in a way that is satisfying, but that is not the point.)

Yes, xorg gave me some pain, but just now I am very satisfied: My intel 
945GME based Eee PC can switch VTY/X11 for the very first time without 
the screen blanking after the upgrade to 7.2-RELEASE (thanks so much for 
the DRM updates!) and does not crash anymore on playing video after the 
latest driver update -- which happened independently of an server 
release. My rather old radeon r200 based laptop does 2D and 3D with less 
problems than ever before. Another nvidia based laptop works fine with 
the closed driver -- I hope an open one will replace it one day, but it 
works with composite and 3D at the same time now.

Some less xorg related breakage would be nice, but xorg makes progress 
that is obviously needed for new cards to be supported with good 2D and 
3D and at the same time eliminating the archaic xorg.conf that is a pain 
for multiple input devices, multiple screens, and so on. Each time this 
progress hits me, I swear, too, but overall it seems to be necessary.

Robert does incredible work porting all this to FreeBSD following all 
Intel, ATI, and Nvidia with their obviously very different development 
styles.

Cheers,
Jan Henrik
From bsam at ipt.ru  Sat May 16 13:04:47 2009
From: bsam at ipt.ru (Boris Samorodov)
Date: Sat May 16 13:04:54 2009
Subject: Whither X?
In-Reply-To: <4A0EB261.5060707@janh.de> (Jan Henrik Sylvester's message of
	"Sat\, 16 May 2009 14\:32\:33 +0200")
References: <4A0EB261.5060707@janh.de>
Message-ID: <88970259@bb.ipt.ru>

On Sat, 16 May 2009 14:32:33 +0200 Jan Henrik Sylvester wrote:

> Yes, xorg gave me some pain, but just now I am very satisfied: My
> intel 945GME based Eee PC can switch VTY/X11 for the very first time
> without the screen blanking after the upgrade to 7.2-RELEASE (thanks
> so much for the DRM updates!) and does not crash anymore on playing
> video after the latest driver update -- which happened independently
> of an server release. My rather old radeon r200 based laptop does 2D
> and 3D with less problems than ever before.

For me 7.4 was the first release which gave me a possibility to
use my ATI r300 card -- I could use it only at vesa modes.

And big thanks to Robert too!


WBR
-- 
Boris Samorodov (bsam)
Research Engineer, http://www.ipt.ru Telephone & Internet SP
FreeBSD Committer, http://www.FreeBSD.org The Power To Serve
From miwi at FreeBSD.org  Sat May 16 14:01:42 2009
From: miwi at FreeBSD.org (miwi@FreeBSD.org)
Date: Sat May 16 14:01:52 2009
Subject: ports/134576: [patch] x11-drivers/xf86-video-nouveau: update to
	recent snapshot, 20090514.9656762
Message-ID: <200905161401.n4GE1gsV031894@freefall.freebsd.org>

Synopsis: [patch] x11-drivers/xf86-video-nouveau: update to recent snapshot, 20090514.9656762

State-Changed-From-To: open->closed
State-Changed-By: miwi
State-Changed-When: Sat May 16 14:01:41 UTC 2009
State-Changed-Why: 
Committed. Thanks!

http://www.freebsd.org/cgi/query-pr.cgi?pr=134576
From jimmiejaz at gmail.com  Sat May 16 14:05:30 2009
From: jimmiejaz at gmail.com (Jimmie James)
Date: Sat May 16 14:05:37 2009
Subject: Repeatable X lockups
Message-ID: <4A0EC825.7010102@gmail.com>

On Fri, 15 May 2009 08:53:24 -0500 Robert Noland said:

>On Thu, 2009-05-14 at 18:37 -0400, Albert Vest wrote:
>> Paul B. Mahol wrote:
>> > On 5/13/09, Jimmie James <jimmiejaz@gmail.com> wrote:
>=20
> >> One thing to note, I dont switch to console while DRI is active
> >> otherwise panic could happen(last time when I tested it with 915GM).
>>=20
>> I've been experiencing something similar, not a panic but, whenever I=20
>> switch to console (ctrl-f1?) and come back to X (ctrl-f9), my session=20
>> goes away and a new XDM screen presents itself for a fresh login.

>This sounds like the xserver is crashing.

This is a crash of the xserver, usually a sig.6 in /var/log/messages is
pid 65663 (Xorg), uid 0: exited on signal 6,
(WW) intel(0): drmDropMaster failed: Unknown error: -1
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xc5819000 at 0x2884f000
(II) intel(0): [drm] Closed DRM master.

leaving the console looking like 
http://img.photobucket.com/albums/v287/jimmiejaz/xcrash.jpg .
While you can ssh in, restart X, the console stays corrupted like that.
Memory heap 0x2867e260:
   Offset:0002a000, Size:00100000, F.
Free list:
  FREE Offset:0002a000, Size:00100000, F.
End of memory blocks

(WW) intel(0): drmDropMaster failed: Unknown error: -1
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xc5819000 at 0x2884f000
(II) intel(0): [drm] Closed DRM master.
http://docs.freebsd.org/cgi/getmsg.cgi?fetch=291042+0+archive/2009/freebsd-x11/20090503.freebsd-x11


>> Might it have to do with my hardware?  I started using one of those=20
>> "wide screen" displays (1440 x 900), about the same time my updates=20
>> started showing "7.2-PRERELEASE" as version number, and it still happens=20
>> with "7.2-STABLE".  All ports current (except OOO 3.0.0).
>=20
>> Still using the same Radeon 9100 "IGP" forced to PCI mode, if that might=20
>> matter.

>Does it detect as AGP natively?
display bits from dmesg:
vgapci0: <VGA-compatible display> port 0x6800-0x6807 mem
0xcfd80000-0xcfdfffff,0xd0000000-0xdfffffff,0xcfe80000-0xcfebffff at
device 2.0 on pci0
agp0: <Intel 82915G (915G GMCH) SVGA controller> on vgapci0
drm0: <Intel i915G> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
vgapci1: <VGA-compatible display> mem 0xcfe00000-0xcfe7ffff at device
2.1 on pci0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
drm0: <Intel i915G> on vgapci0
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xd0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
drm0: [ITHREAD]
agp0: <Intel 82915G (915G GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
info: [drm] AGP at 0xd0000000 256MB


-- 
Over the years I've come to regard you as people I've met.

From dfilter at FreeBSD.ORG  Sat May 16 14:10:04 2009
From: dfilter at FreeBSD.ORG (dfilter service)
Date: Sat May 16 14:10:09 2009
Subject: ports/134576: commit references a PR
Message-ID: <200905161410.n4GEA37F035535@freefall.freebsd.org>

The following reply was made to PR ports/134576; it has been noted by GNATS.

From: dfilter@FreeBSD.ORG (dfilter service)
To: bug-followup@FreeBSD.org
Cc:  
Subject: Re: ports/134576: commit references a PR
Date: Sat, 16 May 2009 14:01:50 +0000 (UTC)

 miwi        2009-05-16 14:01:34 UTC
 
   FreeBSD ports repository
 
   Modified files:
     x11-drivers/xf86-video-nouveau Makefile distinfo 
   Log:
   - Update to 20090514.9656762 to reflect libdrm update
   
   PR:             134576
   Submitted by:   Anonymous <swell.k@gmail.com>
   
   Revision  Changes    Path
   1.6       +5 -6      ports/x11-drivers/xf86-video-nouveau/Makefile
   1.3       +3 -3      ports/x11-drivers/xf86-video-nouveau/distinfo
 _______________________________________________
 cvs-all@freebsd.org mailing list
 http://lists.freebsd.org/mailman/listinfo/cvs-all
 To unsubscribe, send any mail to "cvs-all-unsubscribe@freebsd.org"
 
From jimmiejaz at gmail.com  Sat May 16 14:25:47 2009
From: jimmiejaz at gmail.com (Jimmie James)
Date: Sat May 16 14:25:54 2009
Subject: Whither X?
Message-ID: <4A0ECCE1.8030007@gmail.com>

ON Fri, 15 May 2009 19:28:28 -0500
Robert Noland said:

>You failed to mention that I am essentially the only person maintaining
>Xorg, drm, Mesa (libGL, dri, etc...) and at least some subset of agp.

I for one, thank you for all of your hard work, time and dedication. For 
one person to handle such a mess is, impressive, to say the least.
I personally feel there's not enough thanks and praise for all your work.

>Intel is on the brink of just not working at all if I don't get at least GEM ported.

I'm very sad to hear this, as for now I'm stuck with a
vgapci0@pci0:0:2:0:     class=0x030000 card=0x25821043 chip=0x25828086 
rev=0x04 hdr=0x00
     vendor     = 'Intel Corporation'
     device     = '82915G/GV/GL, 82910GL Integrated Graphics Device'
I also have a box with an i810 in it.

I can't code/port to save a drowning kitten's life, but if you need a 
tester, I'd be willing, as long as rolling back to the "working" Xorg is 
possible, and there's no damage done to the hardware, though I may need 
a bit of handholding.

Robert, feel free to contact me on/off-list (not subscribed, but read 
daily) if there's anything I can do to help.


Thank again for all your work.
-- 
Over the years I've come to regard you as people I've met.

From rnoland at FreeBSD.org  Sat May 16 15:45:13 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Sat May 16 15:45:19 2009
Subject: Whither X?
In-Reply-To: <20090516110938.GA16230@server.vk2pj.dyndns.org>
References: <20090515232350.GH57001@server.vk2pj.dyndns.org>
	<1242433708.5638.26.camel@balrog.2hip.net>
	<20090516110938.GA16230@server.vk2pj.dyndns.org>
Message-ID: <1242488669.5638.35.camel@balrog.2hip.net>

On Sat, 2009-05-16 at 21:09 +1000, Peter Jeremy wrote:
> >  Intel is on the brink of just not working at all
> >if I don't get at least GEM ported.
> 
> I've seen references to GEM (and messages about it not existing) but
> don't know anything about it.  What is it and what is involved in
> porting it?

GEM is one of two kernel memory managers.  The other is TTM which was
the first attempt.  TTM is also now being redeveloped based on the
experience gained from the first attempt.  GEM is Intel's solution and
the 2.7.x series driver will be the last driver to work without
UXA/DRI2/GEM and possibly KMS (Kernel Mode Setting).  The radeon and
nouveau drivers are expected to use a TTM backend while providing a GEM
API to userland.  Last I heard, the openchrome driver will be TTM, but
I'm not as tuned in to that development as I still don't have via
hardware.

robert.

-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090516/9912a9e7/attachment.pgp
From rnoland at FreeBSD.org  Sat May 16 16:03:41 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Sat May 16 16:03:47 2009
Subject: Whither X?
In-Reply-To: <4A0EA410.5020909@mansionfamily.plus.com>
References: <20090515232350.GH57001@server.vk2pj.dyndns.org>
	<1242433708.5638.26.camel@balrog.2hip.net>
	<4A0EA410.5020909@mansionfamily.plus.com>
Message-ID: <1242489777.5638.53.camel@balrog.2hip.net>

On Sat, 2009-05-16 at 12:31 +0100, James Mansion wrote:
> Robert Noland wrote:
> > Xorg in general, while some are porting issues.  Since I don't see
> > patches attached, I have to assume that you are ok with that.  On the
> >   
> I thought in general people had grown out of 'send me the patches' but 
> clearly not.  Is it
> not OK to be just a user, and to complain when the system regresses?

Yes, it is fine to be just a user and I try to address any issues
brought to my attention.  I am just overloaded and at the very least
need good debugging info.  In general, I just need other folks to take
an interest in helping with X and all the bits and pieces that go along
with it.  Whether that is trying to help with documentation or porting
or just trying to help answer other users questions when you can.

> > Some of the POLA issues that you raise have been discussed on Xorg lists
> > and have valid reasons for the changes, for at least some value of
> > valid.  The change to libpciaccess is what broke multi-card setups, but
> > would you argue that the xserver should be doing os specific frobbing of
> > the pci bus?  While this particular issue is being worked on again
> > lately, the overall number of users that it effects is relatively small.
> >
> >   
>  From the point of view of a dispassionate observer, it does seem that 
> X.org has moved slowly
> but significantly from an attempt to keep all its user communities happy 
> to focussing greatly
> on Linux and caring little if *BSD and *Solaris lack the resources to 
> keep up trying to emulate
> design decisions that are Linux-centric, then that's just tough.  Or so 
> it seems.

Well, Intel is trying to drive a lot of development and are only focused
on linux.  While they aren't actively trying impede our progress, they
aren't really concerned with providing us much help.  Other driver
developers are more kind in general, AMD has been really good to work
with both from the aspect of providing me with hardware and trying to
produce code that doesn't require massive changes to work on FreeBSD or
linux.  The Nouveau developers are also quite happy to work with us.
Almost all development is done on linux though.

> I don't think anyone can blame you for being a bit defensive Robert.  
> The problem is
> with X.org.  Upstream need to be honest with everyone about how much 
> they care about
> some of their users.

> Maybe we will all come to regret that no-one seemed interested in taking 
> the old Scitech
> SNAP product further when they gave up on it.
> 
> (http://www.scitechsoft.com/news/press/sale_of_snap.html)
> 
> 
> Perhaps the answer is to step back and consider whether something akin 
> to the emulation
> that allows Windows NDIS drivers to run could be fashioned to allow 
> Windows graphics
> drivers to run - perhaps using recent virtualisation advances to limit 
> the damage they can
> do.  While politically painful on some levels, it does provide for a 
> functional binary
> compatibility abstraction.  Pretty soon most of us will have desktop 
> devices that handle the
> new x86 virtualization features and it becomes increasingly pointless to 
> hang onto old
> X terms when you can get hardware like an Aspire Revo for peanuts.

I really don't think that is is at all feasible... At least not if you
expect any sort of performance.

> I've not looked at building X recently, but if the new build system is 
> so bad, then why
> not replace it?  waf seems handy to me.  Its a lot faster than scons, 
> handy to script in
> Python, and can handle configuration tasks etc.

Well, I really don't have a big problem with the build system.  Sure
maybe it could be more efficient or faster, but even I don't build
everything that often and building X is pretty fast, when compared to
building gnome or kde.

robert.

> James
> 
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090516/653803b0/attachment.pgp
From rnoland at FreeBSD.org  Sat May 16 16:17:26 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Sat May 16 16:17:32 2009
Subject: Whither X?
In-Reply-To: <4A0ECCE1.8030007@gmail.com>
References: <4A0ECCE1.8030007@gmail.com>
Message-ID: <1242490602.5638.64.camel@balrog.2hip.net>

On Sat, 2009-05-16 at 10:25 -0400, Jimmie James wrote:
> ON Fri, 15 May 2009 19:28:28 -0500
> Robert Noland said:
> 
> >You failed to mention that I am essentially the only person maintaining
> >Xorg, drm, Mesa (libGL, dri, etc...) and at least some subset of agp.
> 
> I for one, thank you for all of your hard work, time and dedication. For 
> one person to handle such a mess is, impressive, to say the least.
> I personally feel there's not enough thanks and praise for all your work.
> 
> >Intel is on the brink of just not working at all if I don't get at least GEM ported.
> 
> I'm very sad to hear this, as for now I'm stuck with a
> vgapci0@pci0:0:2:0:     class=0x030000 card=0x25821043 chip=0x25828086 
> rev=0x04 hdr=0x00
>      vendor     = 'Intel Corporation'
>      device     = '82915G/GV/GL, 82910GL Integrated Graphics Device'
> I also have a box with an i810 in it.

Ok, perhaps I over-stated just a bit... The 2.7 series driver an beyond
*should* work with UXA and no drm.

robert.

> I can't code/port to save a drowning kitten's life, but if you need a 
> tester, I'd be willing, as long as rolling back to the "working" Xorg is 
> possible, and there's no damage done to the hardware, though I may need 
> a bit of handholding.
> 
> Robert, feel free to contact me on/off-list (not subscribed, but read 
> daily) if there's anything I can do to help.

Thanks, One of my biggest issues right now is being so overwhelmed that
I'm only occasionally able to focus on a single aspect.

robert.

> 
> Thank again for all your work.
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090516/e4063051/attachment.pgp
From rnoland at FreeBSD.org  Sat May 16 16:21:56 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Sat May 16 16:22:03 2009
Subject: Repeatable X lockups
In-Reply-To: <4A0EC825.7010102@gmail.com>
References: <4A0EC825.7010102@gmail.com>
Message-ID: <1242490872.5638.68.camel@balrog.2hip.net>

On Sat, 2009-05-16 at 10:05 -0400, Jimmie James wrote:
> On Fri, 15 May 2009 08:53:24 -0500 Robert Noland said:
> 
> >On Thu, 2009-05-14 at 18:37 -0400, Albert Vest wrote:
> >> Paul B. Mahol wrote:
> >> > On 5/13/09, Jimmie James <jimmiejaz@gmail.com> wrote:
> >=20
> > >> One thing to note, I dont switch to console while DRI is active
> > >> otherwise panic could happen(last time when I tested it with 915GM).
> >>=20
> >> I've been experiencing something similar, not a panic but, whenever I=20
> >> switch to console (ctrl-f1?) and come back to X (ctrl-f9), my session=20
> >> goes away and a new XDM screen presents itself for a fresh login.
> 
> >This sounds like the xserver is crashing.
> 
> This is a crash of the xserver, usually a sig.6 in /var/log/messages is
> pid 65663 (Xorg), uid 0: exited on signal 6,
> (WW) intel(0): drmDropMaster failed: Unknown error: -1
> (II) intel(0): [drm] removed 1 reserved context for kernel
> (II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xc5819000 at 0x2884f000
> (II) intel(0): [drm] Closed DRM master.

One thing that we discovered yesterday, (and it would be awesome if
someone fixed it) is that if you build the xserver without HAL support,
it doesn't get linked with -pthread.  This is causing some xserver
crashes with at least the intel driver.

robert.

> leaving the console looking like 
> http://img.photobucket.com/albums/v287/jimmiejaz/xcrash.jpg .
> While you can ssh in, restart X, the console stays corrupted like that.
> Memory heap 0x2867e260:
>    Offset:0002a000, Size:00100000, F.
> Free list:
>   FREE Offset:0002a000, Size:00100000, F.
> End of memory blocks
> 
> (WW) intel(0): drmDropMaster failed: Unknown error: -1
> (II) intel(0): [drm] removed 1 reserved context for kernel
> (II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xc5819000 at 0x2884f000
> (II) intel(0): [drm] Closed DRM master.
> http://docs.freebsd.org/cgi/getmsg.cgi?fetch=291042+0+archive/2009/freebsd-x11/20090503.freebsd-x11
> 
> 
> >> Might it have to do with my hardware?  I started using one of those=20
> >> "wide screen" displays (1440 x 900), about the same time my updates=20
> >> started showing "7.2-PRERELEASE" as version number, and it still happens=20
> >> with "7.2-STABLE".  All ports current (except OOO 3.0.0).
> >=20
> >> Still using the same Radeon 9100 "IGP" forced to PCI mode, if that might=20
> >> matter.
> 
> >Does it detect as AGP natively?
> display bits from dmesg:
> vgapci0: <VGA-compatible display> port 0x6800-0x6807 mem
> 0xcfd80000-0xcfdfffff,0xd0000000-0xdfffffff,0xcfe80000-0xcfebffff at
> device 2.0 on pci0
> agp0: <Intel 82915G (915G GMCH) SVGA controller> on vgapci0
> drm0: <Intel i915G> on vgapci0
> vgapci0: child drm0 requested pci_enable_busmaster
> vgapci1: <VGA-compatible display> mem 0xcfe00000-0xcfe7ffff at device
> 2.1 on pci0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> drm0: <Intel i915G> on vgapci0
> vgapci0: child drm0 requested pci_enable_busmaster
> info: [drm] AGP at 0xd0000000 256MB
> info: [drm] Initialized i915 1.6.0 20080730
> drm0: [ITHREAD]
> agp0: <Intel 82915G (915G GMCH) SVGA controller> on vgapci0
> agp0: detected 7932k stolen memory
> agp0: aperture size is 256M
> info: [drm] AGP at 0xd0000000 256MB
> 
> 
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090516/ab9e2e3b/attachment.pgp
From romain at blogreen.org  Sat May 16 17:32:48 2009
From: romain at blogreen.org (Romain =?iso-8859-1?Q?Tarti=E8re?=)
Date: Sat May 16 17:32:54 2009
Subject: How to stay up-to-date with Nouveau?
Message-ID: <20090516173246.GA76116@blogreen.org>

Hi!

I am happily using Nouveau from a while now and have always updated my
ports according to the following scheme:
  1. Update the system "as usual";
  2. Update and install drm from git;
  3. Update and install xf86-video-nouveau from git.

I have been doing this since I have patched my src tree (I continued to
update my system using subversion so the patches are still merged in
it).


However, I can see ports update for xf86-video-nouveau so I am wondering
if I could just continue to use drm and xf86-video-nouveau from the
ports instead of the ones in git? I think that patches in the system are
still required, are they?


Thank you!
Romain

-- 
Romain Tarti?re <romain@blogreen.org>        http://romain.blogreen.org/
pgp: 8DAB A124 0DA4 7024 F82A  E748 D8E9 A33F FF56 FF43 (ID: 0xFF56FF43)
(plain text =non-HTML= PGP/GPG encrypted/signed e-mail much appreciated)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090516/2b9cf875/attachment.pgp
From tevans.uk at googlemail.com  Sat May 16 17:43:36 2009
From: tevans.uk at googlemail.com (Tom Evans)
Date: Sat May 16 17:43:47 2009
Subject: Xorg 1.6.0 uses 100% CPU in gnome+gdm
In-Reply-To: <200905151314.01390.kstewart@owt.com>
References: <1242416473.14085.5.camel@localhost>
	<200905151314.01390.kstewart@owt.com>
Message-ID: <1242495750.1617.1.camel@localhost>

On Fri, 2009-05-15 at 13:14 -0700, Kent Stewart wrote:
> On Friday 15 May 2009 12:41:13 pm Tom Evans wrote:
> > Hi all
> >
> > I upgraded kernel, world and ports from ~7.1 RELEASE to RELENG_7 of
> > yesterday, and now Xorg constantly chews CPU. I'm running:
> >
> > FreeBSD jacob.nubtek.com 7.2-STABLE FreeBSD 7.2-STABLE #2: Thu May 14
> > 20:37:49 BST 2009
> > root@jacob.nubtek.com:/usr/obj/usr/data/FreeBSD/RELENG_7/src/sys/LOST
> > i386
> >
> > I've double checked that all ports are up to date, and was going to
> > blame some bug in the nvidia binary driver, but it also exhibits it if I
> > use the 'nv' or 'vesa' driver as well - I've not tested nouveau. The
> > nvidia.ko module was loaded whilst running with nv and vesa, would that
> > matter?
> >
> 
> I have had this happen several times. It always went away after I force built 
> xorg and its dependancies. My personal opinion is that something was built 
> out of order and while your ports may be current, something used an old 
> linkage.
> 
> Kent
> 

Sorry for the noise, I didn't notice until this morning that I had
checked out x11-servers/xorg-server with a sticky date from CVS.
Reverting that, rebuilding xorg-server and all dependant ports made the
problem go away.

Cheers

Tom

From rnoland at FreeBSD.org  Sat May 16 18:05:11 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Sat May 16 18:05:17 2009
Subject: How to stay up-to-date with Nouveau?
In-Reply-To: <20090516173246.GA76116@blogreen.org>
References: <20090516173246.GA76116@blogreen.org>
Message-ID: <1242497053.5638.70.camel@balrog.2hip.net>

On Sat, 2009-05-16 at 19:32 +0200, Romain Tarti?re wrote:
> Hi!
> 
> I am happily using Nouveau from a while now and have always updated my
> ports according to the following scheme:
>   1. Update the system "as usual";
>   2. Update and install drm from git;
>   3. Update and install xf86-video-nouveau from git.
> 
> I have been doing this since I have patched my src tree (I continued to
> update my system using subversion so the patches are still merged in
> it).
> 
> 
> However, I can see ports update for xf86-video-nouveau so I am wondering
> if I could just continue to use drm and xf86-video-nouveau from the
> ports instead of the ones in git? I think that patches in the system are
> still required, are they?

You still need my kernel patch until it eventually gets committed.  The
current libdrm and xf86-video-nouveau ports should be fine now though.

robert.

> 
> Thank you!
> Romain

-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090516/211abe6b/attachment.pgp
From romain at blogreen.org  Sat May 16 18:42:49 2009
From: romain at blogreen.org (Romain =?iso-8859-1?Q?Tarti=E8re?=)
Date: Sat May 16 18:42:57 2009
Subject: How to stay up-to-date with Nouveau?
In-Reply-To: <1242497053.5638.70.camel@balrog.2hip.net>
References: <20090516173246.GA76116@blogreen.org>
	<1242497053.5638.70.camel@balrog.2hip.net>
Message-ID: <20090516184248.GA51870@blogreen.org>

On Sat, May 16, 2009 at 01:04:13PM -0500, Robert Noland wrote:
> You still need my kernel patch until it eventually gets committed.  The
> current libdrm and xf86-video-nouveau ports should be fine now though.
Cool! This will ease updates :-)

Thanks,
Romain

-- 
Romain Tarti?re <romain@blogreen.org>        http://romain.blogreen.org/
pgp: 8DAB A124 0DA4 7024 F82A  E748 D8E9 A33F FF56 FF43 (ID: 0xFF56FF43)
(plain text =non-HTML= PGP/GPG encrypted/signed e-mail much appreciated)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090516/daf2da10/attachment.pgp
From miwi at FreeBSD.org  Sat May 16 23:51:26 2009
From: miwi at FreeBSD.org (miwi@FreeBSD.org)
Date: Sat May 16 23:51:33 2009
Subject: ports/119037: x11: Can't type _ (Underscore) under X (gnome)
Message-ID: <200905162351.n4GNpQew025792@freefall.freebsd.org>

Synopsis: x11: Can't type _ (Underscore) under X (gnome)

State-Changed-From-To: feedback->closed
State-Changed-By: miwi
State-Changed-When: Sat May 16 23:51:25 UTC 2009
State-Changed-Why: 
feedback timeout.

http://www.freebsd.org/cgi/query-pr.cgi?pr=119037
From miwi at FreeBSD.org  Sun May 17 00:04:16 2009
From: miwi at FreeBSD.org (miwi@FreeBSD.org)
Date: Sun May 17 00:04:23 2009
Subject: ports/133025: [patch] graphics/libGL: mark Mesa ports as
	MAKE_JOBS_SAFE
Message-ID: <200905170004.n4H04FTY045133@freefall.freebsd.org>

Synopsis: [patch] graphics/libGL: mark Mesa ports as MAKE_JOBS_SAFE

State-Changed-From-To: open->closed
State-Changed-By: miwi
State-Changed-When: Sun May 17 00:04:15 UTC 2009
State-Changed-Why: 
Committed. Thanks!

http://www.freebsd.org/cgi/query-pr.cgi?pr=133025
From dfilter at FreeBSD.ORG  Sun May 17 00:10:04 2009
From: dfilter at FreeBSD.ORG (dfilter service)
Date: Sun May 17 00:10:16 2009
Subject: ports/133025: commit references a PR
Message-ID: <200905170010.n4H0A3Qs045347@freefall.freebsd.org>

The following reply was made to PR ports/133025; it has been noted by GNATS.

From: dfilter@FreeBSD.ORG (dfilter service)
To: bug-followup@FreeBSD.org
Cc:  
Subject: Re: ports/133025: commit references a PR
Date: Sun, 17 May 2009 00:04:14 +0000 (UTC)

 miwi        2009-05-17 00:04:04 UTC
 
   FreeBSD ports repository
 
   Modified files:
     graphics/libGL       bsd.mesalib.mk 
   Log:
   - Make following ports MAKE_JOBS_SAFE:
   
   graphics/dri
   graphics/libGL
   graphics/libGLU
   graphics/libGLw
   graphics/libglut
   graphics/mesa-demos
   
   PR:             133025
   Submitted by:   Anonymous <swell.k@gmail.com>
   Oked:           rnoland
   
   Revision  Changes    Path
   1.12      +2 -1      ports/graphics/libGL/bsd.mesalib.mk
 _______________________________________________
 cvs-all@freebsd.org mailing list
 http://lists.freebsd.org/mailman/listinfo/cvs-all
 To unsubscribe, send any mail to "cvs-all-unsubscribe@freebsd.org"
 
From peterjeremy at optushome.com.au  Sun May 17 00:18:51 2009
From: peterjeremy at optushome.com.au (Peter Jeremy)
Date: Sun May 17 00:18:59 2009
Subject: Further Xorg regressions
In-Reply-To: <20090415090751.GD1390@server.vk2pj.dyndns.org>
References: <20090415090751.GD1390@server.vk2pj.dyndns.org>
Message-ID: <20090517001847.GA41954@server.vk2pj.dyndns.org>

On 2009-Apr-15 19:07:51 +1000, Peter Jeremy <peter@server.vk2pj.dyndns.org> wrote:
>I have just finished upgrading my amd64 to a fairly recent -current
>(from Sunday), together with a completely up-to-date ports tree and
>X.org has now "improved" to the point where it doesn't work at all.
>
>The video card is a Radeon HD 2400 Pro (RV610).
>
>With the radeonhd driver, Xorg starts and just displays a totally blank
>(though active) screen.  I can switch to/from VTY screens without
>problem and Ctrl-Alt-BS works properly (after enabling it).  Output
>from X is:
>server# X -nolisten inet6 -config /etc/X11/xorg.conf.rhd

For the archives, this particular brokenness is now "normal".  In order to
get anything displayed, you need to add '-retro' to the Xserver invocation.

-- 
Peter Jeremy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090517/dd4eef79/attachment.pgp
From peterjeremy at optushome.com.au  Sun May 17 00:36:19 2009
From: peterjeremy at optushome.com.au (Peter Jeremy)
Date: Sun May 17 00:36:25 2009
Subject: non working DRI on *i386* RADEONX1650+FreeBSD7-stable+Xorg7.4
In-Reply-To: <20090404.210812.48524346.chat95@mac.com>
References: <20090207.071848.193785503.chat95@mac.com>
	<20090207.072411.71183618.chat95@mac.com>
	<1234026184.1562.47.camel@ferret.2hip.net>
	<20090404.210812.48524346.chat95@mac.com>
Message-ID: <20090517003614.GA69450@server.vk2pj.dyndns.org>

On 2009-Apr-04 21:08:12 +0900, Maho NAKATA <chat95@mac.com> wrote:
>Still DRI on *i386* RADEONX1650+FreeBSD7-stable+Xorg7.4 doesn't work.
>I updated FBSD userland, kernel and ports...and there is a progress,
>no garbled screen ;) but still I cannot use DRI; PCI failed to initialize.
>Disabling the DRI.
>
>Helps are really appreciated.
>
>Here is the logs.
>
>* grep EE /var/log/Xorg.0.log
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>(II) Loading extension MIT-SCREEN-SAVER
>(EE) RADEON(0): [pci] Out of memory (-12)
>(EE) RADEON(0): [pci] PCI failed to initialize. Disabling the DRI.

As a further datapoint for the archives, I just bumped into this on a
ATI Radeon XPRESS 200M 5955 (PCIE) with up-to-date ports
(dri-7.4.2_1,2, xf86-video-ati-6.12.2_1 and xorg-server-1.6.1,1) and
EXA acceleration.  It seems that the newer DRI needs a larger aperture
than the older DRI - when I doubled the aperture size in the BIOS (from
32MB to 64MB), the problem went away and DRI appears to work.

-- 
Peter Jeremy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090517/2294c645/attachment.pgp
From bennett at cs.niu.edu  Sun May 17 11:47:06 2009
From: bennett at cs.niu.edu (Scott Bennett)
Date: Sun May 17 11:47:13 2009
Subject: X questions before installing FreeBSD 7.2
Message-ID: <200905171047.n4HAlaC7013024@mp.cs.niu.edu>

     I've been running FreeBSD 6.3+ (i.e., -STABLE, but stuck at a time last
year when kernel updates for the Radeon driver made the system fail) with my
ports tree frozen at the point of the freeze before the X.org 6.9 - 7.2 switch.
Later today I hope to shut it down, install FreeBSD 7.2-RELEASE, and start
configuring things and installing ports to get things more or less the way
the way I've had them.  But, having attempted to upgrade X.org 6.9 to 7.3
several months ago and failing to get a usable X out of it (e.g., the first
click on a Firefox window crashed X and left the whole system inaccessible,
necessitating a power off and reboot), I'm leary of what the version of X.org
distributed in FreeBSD 7.2-RELEASE is going to do.  Restoring the old system
could be done, but it's so old that that isn't really a good option, and it
takes a horribly long time to do.
     Here are relevant excerpts from the dmesg(8) output and the Xorg.0.log
file from the currently running system, which is a Dell Inspiron XPS built
in November 2004.

------------------------dmesg(8) output excerpt---------------------

Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.3-STABLE #187: Wed Aug 13 03:10:56 CDT 2008
    bennett@hellas:/usr/src/sys/i386/compile/SMP-hellas
ACPI APIC Table: <DELL   CPi R  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.40GHz (3391.52-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,xTPR>
  Logical CPUs per core: 2
real memory  = 2147131392 (2047 MB)
avail memory = 2091757568 (1994 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL CPi R  > on motherboard
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
drm0: <ATI Radeon JN R420 Mobility M18> port 0xc000-0xc0ff mem 0xe0000000-0xefffffff,0xfcff0000-0xfcffffff irq 16 at device 0.0 on pci1
info: [drm] AGP at 0xf0000000 128MB
info: [drm] Initialized radeon 1.25.0 20060524


---------------------------Xorg.0.log excerpts-------------------------

X Window System Version 6.9.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 6.9
Build Operating System: FreeBSD 6.1 i386 [ELF] 
Current Operating System: FreeBSD hellas 6.3-STABLE FreeBSD 6.3-STABLE #187: Wed Aug 13 03:10:56 CDT 2008     bennett@hellas:/usr/src/sys/i386/compile/SMP-hellas i386
Build Date: 09 December 2006
.
.
.
(II) ATI: ATI driver (version 6.5.7) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
.
.
.
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
.
.
.
	ATI Radeon Mobility 9800 (M18) JN (AGP),
.
.
.
(II) Primary Device is: PCI 01:00:0
(--) Chipset ATI Radeon Mobility 9800 (M18) JN (AGP) found
.
.
.
(II) Loading /usr/X11R6/lib/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
	compiled for 6.9.0, module version = 1.2.0
	ABI class: X.Org Video Driver, version 0.8
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 0
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0): 
(II) RADEON(0): Primary:
 Monitor   -- LVDS
 Connector -- DVI-I
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- Internal
 DDC Type  -- DVI_DDC
(II) RADEON(0): Secondary:
 Monitor   -- NONE
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=35000; xclk=29925
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Panel ID string: Y5703
(II) RADEON(0): Panel Size from BIOS: 1920x1200
(II) RADEON(0): BIOS provided dividers will be used.
(II) RADEON(0): Total number of valid DDC mode(s) found: 0
(II) RADEON(0): No valid mode specified, force to native mode
(II) RADEON(0): Total number of valid FP mode(s) found: 1
(--) RADEON(0): Virtual size is 1920x1200 (pitch 1920)
(**) RADEON(0): *Mode "1920x1200": 161.8 MHz (scaled from 0.0 MHz), 74.1 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1920x1200"  161.75  1920 2016 2048 2184  1200 1202 1208 1235
(**) RADEON(0):  Default mode "640x350": 161.8 MHz (scaled from 0.0 MHz), 74.1 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x350"  161.75  640 2016 2048 2184  350 1202 1208 1235
(**) RADEON(0):  Default mode "640x400": 161.8 MHz (scaled from 0.0 MHz), 74.1 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x400"  161.75  640 2016 2048 2184  400 1202 1208 1235
(**) RADEON(0):  Default mode "720x400": 161.8 MHz (scaled from 0.0 MHz), 74.1 kHz, 60.0 Hz
(II) RADEON(0): Modeline "720x400"  161.75  720 2016 2048 2184  400 1202 1208 1235
(**) RADEON(0):  Default mode "640x480": 161.8 MHz (scaled from 0.0 MHz), 74.1 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480"  161.75  640 2016 2048 2184  480 1202 1208 1235
(**) RADEON(0):  Default mode "800x600": 161.8 MHz (scaled from 0.0 MHz), 74.1 kHz, 60.0 Hz
(II) RADEON(0): Modeline "800x600"  161.75  800 2016 2048 2184  600 1202 1208 1235
(**) RADEON(0):  Default mode "1024x768": 161.8 MHz (scaled from 0.0 MHz), 74.1 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768"  161.75  1024 2016 2048 2184  768 1202 1208 1235
(**) RADEON(0):  Default mode "1152x864": 161.8 MHz (scaled from 0.0 MHz), 74.1 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1152x864"  161.75  1152 2016 2048 2184  864 1202 1208 1235
(**) RADEON(0):  Default mode "1280x960": 161.8 MHz (scaled from 0.0 MHz), 74.1 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x960"  161.75  1280 2016 2048 2184  960 1202 1208 1235
(**) RADEON(0):  Default mode "1280x1024": 161.8 MHz (scaled from 0.0 MHz), 74.1 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x1024"  161.75  1280 2016 2048 2184  1024 1202 1208 1235
(**) RADEON(0):  Default mode "1600x1200": 161.8 MHz (scaled from 0.0 MHz), 74.1 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1600x1200"  161.75  1600 2016 2048 2184  1200 1202 1208 1235
(**) RADEON(0):  Default mode "832x624": 161.8 MHz (scaled from 0.0 MHz), 74.1 kHz, 60.0 Hz
(II) RADEON(0): Modeline "832x624"  161.75  832 2016 2048 2184  624 1202 1208 1235
(**) RADEON(0):  Default mode "1152x768": 161.8 MHz (scaled from 0.0 MHz), 74.1 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1152x768"  161.75  1152 2016 2048 2184  768 1202 1208 1235
(**) RADEON(0):  Default mode "1400x1050": 161.8 MHz (scaled from 0.0 MHz), 74.1 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1400x1050"  161.75  1400 2016 2048 2184  1050 1202 1208 1235
(**) RADEON(0):  Default mode "1600x1024": 161.8 MHz (scaled from 0.0 MHz), 74.1 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1600x1024"  161.75  1600 2016 2048 2184  1024 1202 1208 1235
(==) RADEON(0): DPI set to (75, 75)


     My questions before getting started later today run like this.

	a) What exactly is supported in the version of X.org distributed with
	   FreeBSD 7.2-RELEASE for this Mobility Radeon 9800 card, given the
	   chip set(s), the screen capabilities, 256 MB on the card, and
	   anything else you happen to notice in the excerpts above?

	b) What sort of DPMS stuff works and what doesn't?  Under 6.9.0, the
	   xscreenserver-demo can be told to shut the screen off after a
	   specified period of disuse, and it will do so.  Unfortunately, it
	   doesn't offer any method of turning the screen back on again, so
	   one has to reboot to get it to work again.  Working with a dead
	   screen pretty much means shutting the system off (i.e., crashing
	   it) and then powering up again.

	c) What other problems are known to occur with this hardware under
	   FreeBSD 7.2-RELEASE and its pre-installed X.org software?

Any other possibly relevant information is also welcome.
     Thanks much for any information I get in response to this.  I'm truly
fed up with having been stuck with old software so long and can hardly wait
to get to something better and, even more importantly, updateable.


                                  Scott Bennett, Comm. ASMELG, CFIAG
**********************************************************************
* Internet:       bennett at cs.niu.edu                              *
*--------------------------------------------------------------------*
* "A well regulated and disciplined militia, is at all times a good  *
* objection to the introduction of that bane of all free governments *
* -- a standing army."                                               *
*    -- Gov. John Hancock, New York Journal, 28 January 1790         *
**********************************************************************
From david at usermode.org  Sun May 17 16:50:47 2009
From: david at usermode.org (David Johnson)
Date: Sun May 17 16:50:54 2009
Subject: X questions before installing FreeBSD 7.2
In-Reply-To: <200905171047.n4HAlaC7013024@mp.cs.niu.edu>
References: <200905171047.n4HAlaC7013024@mp.cs.niu.edu>
Message-ID: <49214.66.245.217.55.1242578332.squirrel@webmail.meer.net>

>      My questions before getting started later today run like this.
>
> 	a) What exactly is supported in the version of X.org distributed with
> 	   FreeBSD 7.2-RELEASE for this Mobility Radeon 9800 card, given the
> 	   chip set(s), the screen capabilities, 256 MB on the card, and
> 	   anything else you happen to notice in the excerpts above?

You only had excerpts from Xorg.log, but xorg-7.4 with Radeon 9800 (using
radeon driver) should have hardware acceleration, OpenGL and compositing.
You just need to configure your xorg.conf file correctly. The driver for
the r300 chipset should be very stable.

> 	b) What sort of DPMS stuff works and what doesn't?  Under 6.9.0, the
> 	   xscreenserver-demo can be told to shut the screen off after a
> 	   specified period of disuse, and it will do so.  Unfortunately, it
> 	   doesn't offer any method of turning the screen back on again, so
> 	   one has to reboot to get it to work again.  Working with a dead
> 	   screen pretty much means shutting the system off (i.e., crashing
> 	   it) and then powering up again.

I haven't seen that at all. I just jiggle the mouse or tab a key, and the
screen comes back in about five seconds.

> 	c) What other problems are known to occur with this hardware under
> 	   FreeBSD 7.2-RELEASE and its pre-installed X.org software?

I have a tiny problem with my Radeon X1550, but it only happens with
regards to AIGLX and I'm fairly sure it only affects certain r500 chipset
cards.

David
From lwindschuh at googlemail.com  Sun May 17 17:27:40 2009
From: lwindschuh at googlemail.com (Lucius Windschuh)
Date: Sun May 17 17:27:46 2009
Subject: xf86-video-intel: Crashes when switching VTs
Message-ID: <90a5caac0905171000xd0629bbl3f3baa5fe7d0f565@mail.gmail.com>

Hi.
I updated my ports, including xf86-video-intel to 2.7.1and the other
X-related ports.
The chipset is an Mobile Intel GM45 Express.

The server is mostly stable. But moving large videos around different
screens is still crashing the servers, I think (but don't dare to
test).

Another issue is more enerving: Switching with Ctrl+Alt+F1 from the X
server to ttyv0 causes an assertion to fail.
Backtrace from gdb:

#0  0x285e75e7 in kill () from /lib/libc.so.7
[New Thread 28701140 (LWP 100239)]
#1  0x284f8337 in raise () from /lib/libthr.so.3
#2  0x285e616a in abort () from /lib/libc.so.7
#3  0x285cc696 in __assert () from /lib/libc.so.7
#4  0x28817951 in I830EmitFlush (pScrn=0x28706c00) at i830_batchbuffer.h:78
78          assert(pI830->batch_ptr != NULL);
#5  0x28817bfc in I830Sync (pScrn=0x28706c00) at i830_accel.c:191
191        I830EmitFlush(pScrn);
#6  0x288257c6 in I830LeaveVT (scrnIndex=0, flags=0) at i830_driver.c:3428
3428       I830Sync(pScrn);
#7  0x080a56a8 in AbortDDX ()
#8  0x0812d1dd in AbortServer ()
#9  0x0812d7bf in FatalError ()
#10 0x080bc3b3 in xf86SigHandler ()
#11 <signal handler called>
#12 0x286a0754 in free_block () from /usr/local/lib/libdrm_intel.so.1
#13 0x286a098b in drm_intel_fake_bo_unreference_locked ()
   from /usr/local/lib/libdrm_intel.so.1
#14 0x286a0a82 in drm_intel_fake_bo_unreference ()
   from /usr/local/lib/libdrm_intel.so.1
#15 0x2869f3b6 in drm_intel_bo_unreference ()
   from /usr/local/lib/libdrm_intel.so.1
#16 0x28858574 in gen4_render_state_cleanup (pScrn=0x28706c00)
    at i965_render.c:1725
1725        drm_intel_bo_unreference(render_state->vs_state_bo);
#17 0x28825948 in I830LeaveVT (scrnIndex=0, flags=0) at i830_driver.c:3465
3465          gen4_render_state_cleanup(pScrn);
#18 0x28825c38 in I830CloseScreen (scrnIndex=0, pScreen=0x28720a80)
    at i830_driver.c:3677
3677          I830LeaveVT(scrnIndex, 0);
#19 0x0814d6fe in RRExtensionInit ()
#20 0x080c330e in xf86ChangeGammaRamp ()
#21 0x080bbec4 in xf86DPMSInit ()
#22 0x2861dff4 in XvCloseScreen ()
   from /usr/local/lib/xorg/modules/extensions//libextmod.so
#23 0x080d2d0c in xf86XvMCCreateAdaptorRec ()
#24 0x2862309d in XvMCCloseScreen ()
   from /usr/local/lib/xorg/modules/extensions//libextmod.so
#25 0x080bfec1 in VidModeExtensionInit ()
#26 0x08138cf5 in XFixesCursorInit ()
#27 0x081675ec in AnimCurInit ()
#28 0x08132c6b in CompositeExtensionInit ()
#29 0x286676da in glxCloseScreen ()
   from /usr/local/lib/xorg/modules/extensions//libglx.so
#30 0x0806bfb5 in main ()

Does anybody have a workaround other than downgrading to 2.5.1?
BTW: Disabling the assertion and executing the block in I830EmitFlush
only when batch_ptr != NULL does not help... ;-)

Regards

Lucius
From jguojun at gmail.com  Sun May 17 17:37:27 2009
From: jguojun at gmail.com (Jin Guojun[VFF])
Date: Sun May 17 17:37:34 2009
Subject: kdb and mouse are disabled on HP Pavilion dv5210us by X.org 7.4.1
 (7.2-R)
Message-ID: <4A104825.8060509@gmail.com>

When installed FreeBSD 7.2 release with xorg-7.4.1, the X server does 
not work on
HP Pavilion dv5210us laptop due to the key board and mouse are disabled 
somehow.
Some Hot keys (Ctrl-Altr-F#) are working but mouse is not movable and 
cannot type in a Xterm.

(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 
'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0

Does anyone hasve an idea how to fix this problem?
Both Xorg.0.log and xorg.conf are attached.

Thanks,
-Jin
-------------- next part --------------

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.2-PRERELEASE i386 
Current Operating System: FreeBSD mobile32.Belkin 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May  1 08:49:13 UTC 2009     root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Build Date: 22 April 2009  02:40:51PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 17 10:02:22 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	built-ins
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x6a0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(--) PCI:*(0@1:5:0) ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE) rev 0, Mem @ 0xc8000000/134217728, 0xc0100000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/65536
(II) System resource ranges:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "radeon"
(II) Loading /usr/local/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 6.12.2
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
	ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
	ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
	ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
	ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
	ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
	ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
	ATI Mobility RADEON M98, ATI Radeon 4800 Series,
	ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
	ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
	ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
	ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
	ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
	ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
	ATI Mobility Radeon 4500 Series, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
	ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
	ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
	ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
	ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
	ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
	ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
	ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
	ATI Radeon HD Graphics, ATI Radeon Graphics,
	ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
	ATI Radeon Graphics
(II) Primary Device is: PCI 01@00:05:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[4] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[5] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[9] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000c0100000
(II) RADEON(0): MMIO registers at 0x00000000c0100000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/local/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon XPRESS 200M 5955 (PCIE)" (ChipID = 0x5955)
(--) RADEON(0): Linear framebuffer at 0x00000000c8000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(==) RADEON(0): Write-combining range (0xa0000,0x20000) was already clear
(==) RADEON(0): Write-combining range (0xc0000,0x40000) was already clear
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(==) RADEON(0): Write-combining range (0x0,0x1000) was already clear
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(II) RADEON(0): Direct rendering experimental on RS400/Xpress 200 enabled
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 100, max_in_pll: 1350, xclk: 25000, sclk: 300.000000, mclk: 250.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=6 min=20000 max=40000; xclk=25000
(II) RADEON(0): Panel ID string: LPL                     
(II) RADEON(0): Panel Size from BIOS: 1280x800
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 71250
HBlank: 160, HOverPlus: 48, HSyncWidth: 32
VBlank: 23, VOverPlus: 2, VSyncWidth: 6
(WW) RADEON(0): LCD DDC Info Table found!
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL PAL-M 
(II) RADEON(0): Port0:
  XRANDR name: VGA-0
  Connector: VGA
  CRT1: INTERNAL_DAC2
  DDC reg: 0x68
(II) RADEON(0): Port1:
  XRANDR name: LVDS
  Connector: LVDS
  LCD1: INTERNAL_LVDS
  DDC reg: 0x1a0
(II) RADEON(0): Port2:
  XRANDR name: S-video
  Connector: S-video
  TV1: INTERNAL_DAC2
  DDC reg: 0x0
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LPL  Model: 2a00  Serial#: 0
(II) RADEON(0): Year: 2005  Week: 0
(II) RADEON(0): EDID Version: 1.2
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.344   greenX: 0.323 greenY: 0.534
(II) RADEON(0): blueX: 0.156 blueY: 0.138   whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.2 MHz   Image Size:  330 x 210 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800  v_sync: 802  v_sync_end 808 v_blanking: 823 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block 0
(II) RADEON(0):  LGPhilipsLCD
(II) RADEON(0):  LP154W01-TLAE
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff00320c002a00000000
(II) RADEON(0): 	000f0102802115780a0f109758528828
(II) RADEON(0): 	23505400000001010101010101010101
(II) RADEON(0): 	010101010101d51b00a0502017303020
(II) RADEON(0): 	26002115100000190000000000000000
(II) RADEON(0): 	00000000000000000000000000fe004c
(II) RADEON(0): 	475068696c6970734c43440a000000fe
(II) RADEON(0): 	004c503135345730312d544c414500cb
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LPL  Model: 2a00  Serial#: 0
(II) RADEON(0): Year: 2005  Week: 0
(II) RADEON(0): EDID Version: 1.2
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.344   greenX: 0.323 greenY: 0.534
(II) RADEON(0): blueX: 0.156 blueY: 0.138   whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.2 MHz   Image Size:  330 x 210 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800  v_sync: 802  v_sync_end 808 v_blanking: 823 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block 0
(II) RADEON(0):  LGPhilipsLCD
(II) RADEON(0):  LP154W01-TLAE
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff00320c002a00000000
(II) RADEON(0): 	000f0102802115780a0f109758528828
(II) RADEON(0): 	23505400000001010101010101010101
(II) RADEON(0): 	010101010101d51b00a0502017303020
(II) RADEON(0): 	26002115100000190000000000000000
(II) RADEON(0): 	00000000000000000000000000fe004c
(II) RADEON(0): 	475068696c6970734c43440a000000fe
(II) RADEON(0): 	004c503135345730312d544c414500cb
(II) RADEON(0): EDID vendor "LPL", prod id 10752
(II) RADEON(0):     EDID quirk: Detailed timings give sizes in cm.
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/local/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.2.1
	ABI class: X.Org Video Driver, version 5.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(==) RADEON(0): Write-combining range (0x0,0x1000) was already clear
(!!) RADEON(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[4] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[5] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[9] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) RADEON(0): RADEONScreenInit c8000000 0 0
(==) RADEON(0): Write-combining range (0xa0000,0x10000) was already clear
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable LVDS
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x08000000
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1280,1202)
(II) RADEON(0): Largest offscreen area available: 1280 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1838000
(II) RADEON(0): Will use depth buffer at offset 0x1e14000
(II) RADEON(0): Will use 94208 kb for textures at offset 0x23f0000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xc8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xd18ca000
(II) RADEON(0): [pci] ring handle = 0xd18ca000
(II) RADEON(0): [pci] Ring mapped at 0x28a50000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xd19cb000
(II) RADEON(0): [pci] Ring read ptr mapped at 0x286e1000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xd19cc000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x30c00000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xd1bcc000
(II) RADEON(0): [pci] GART Texture map mapped at 0x30fcc000
(II) RADEON(0): [drm] register handle = 0xc0100000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 17
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0x1fff1800 is: 0x1fff1800
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0x21ff2000
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x21ff2000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 3
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x005de800
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x005e3800
(II) RADEON(0): Largest offscreen area available: 1280 x 6981
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/local/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
disable TVDAC
disable LVDS
disable TV
disable LVDS
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x21ff2000
restore common
restore crtc1
restore pll1
set RMX
set LVDS
enable LVDS
disable TVDAC
disable TV
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 330 x 210
disable LVDS
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
(==) RADEON(0): Write-combining range (0xa0000,0x10000) was already clear
(II) RADEON(0): Dynamic Clock Scaling Disabled
disable TVDAC
disable LVDS
disable TV
disable LVDS
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x21ff2000
restore common
restore crtc1
restore pll1
set RMX
set LVDS
enable LVDS
disable TVDAC
disable TV
(II) RADEON(0): [RESUME] Attempting to re-init Radeon hardware.
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0x1fff1800 is: 0x1fff1800
(WW) RADEON(0):   MC_AGP_LOCATION was: 0x21ff2000 is: 0x21ff2000
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x21ff2000
disable LVDS
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
(==) RADEON(0): Write-combining range (0xa0000,0x10000) was already clear
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xc301c000 at 0x286df000
(II) RADEON(0): [drm] Closed DRM master.
-------------- next part --------------
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/local/lib/xorg/modules"
	FontPath     "/usr/local/lib/X11/fonts/misc/"
	FontPath     "/usr/local/lib/X11/fonts/TTF/"
	FontPath     "/usr/local/lib/X11/fonts/OTF"
	FontPath     "/usr/local/lib/X11/fonts/Type1/"
	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "dri2"
	Load  "extmod"
	Load  "glx"
	Load  "record"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/sysmouse"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	#DisplaySize	  330   210	# mm
	Identifier   "Monitor0"
	VendorName   "LPL"
	ModelName    "2a00"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "FBTexPercent"       	# <i>
        #Option     "DepthBits"          	# <i>
        #Option     "PCIAPERSize"        	# <i>
        #Option     "AccelDFS"           	# [<bool>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "RageTheatreCrystal" 	# <i>
        #Option     "RageTheatreTunerPort" 	# <i>
        #Option     "RageTheatreCompositePort" 	# <i>
        #Option     "RageTheatreSVideoPort" 	# <i>
        #Option     "TunerType"          	# <i>
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# <i>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "DynamicClocks"      	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ConnectorTable"     	# <str>
        #Option     "DefaultConnectorTable" 	# [<bool>]
        #Option     "DefaultTMDSPLL"     	# [<bool>]
        #Option     "TVDACLoadDetect"    	# [<bool>]
        #Option     "ForceTVOut"         	# [<bool>]
        #Option     "TVStandard"         	# <str>
        #Option     "IgnoreLidStatus"    	# [<bool>]
        #Option     "DefaultTVDACAdj"    	# [<bool>]
        #Option     "Int10"              	# [<bool>]
        #Option     "EXAVSync"           	# [<bool>]
        #Option     "ATOMTVOut"          	# [<bool>]
        #Option     "R4xxATOM"           	# [<bool>]
	Identifier  "Card0"
	Driver      "radeon"
	VendorName  "ATI Technologies Inc"
	BoardName   "Radeon XPRESS 200M 5955 (PCIE)"
	BusID       "PCI:1:5:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

From chuckop at gmail.com  Sun May 17 23:35:50 2009
From: chuckop at gmail.com (Charles Oppermann)
Date: Sun May 17 23:35:56 2009
Subject: kdb and mouse are disabled on HP Pavilion dv5210us by X.org
 7.4.1 (7.2-R)
In-Reply-To: <4A104825.8060509@gmail.com>
References: <4A104825.8060509@gmail.com>
Message-ID: <4A10984E.6070103@gmail.com>

Jin Guojun[VFF] wrote:
> When installed FreeBSD 7.2 release with xorg-7.4.1, the X server does 
> not work on
> HP Pavilion dv5210us laptop due to the key board and mouse are disabled 
> somehow.
> Some Hot keys (Ctrl-Altr-F#) are working but mouse is not movable and 
> cannot type in a Xterm.

A quick search should indicate the solution.  Xorg prefers using HALD 
for hardware access.  If the Hal Daemon isn't running, regular 
keyboard/mouse input won't work.

You can add the following to /etc/rc.conf to automatically start the HAL 
and DBus daemons:

dbus_enable="YES"
hald_enable="YES"

After adding, use the following commands to start the services:

/usr/local/etc/rc.d/dbus start
/user/local/etc/rc.d/hald start

Alternatively, you can add the following line to the ServerLayout 
section of your /etc/X11/xorg.conf file:

Option "AllowEmptyInput" "false"

Hope this helps.

From snasonov at bcc.ru  Mon May 18 07:24:59 2009
From: snasonov at bcc.ru (Sergey G Nasonov)
Date: Mon May 18 07:25:07 2009
Subject: xf86-video-intel: Crashes when switching VTs
In-Reply-To: <90a5caac0905171000xd0629bbl3f3baa5fe7d0f565@mail.gmail.com>
References: <90a5caac0905171000xd0629bbl3f3baa5fe7d0f565@mail.gmail.com>
Message-ID: <200905181055.43431.snasonov@bcc.ru>

On Sunday 17 May 2009 21:00:33 Lucius Windschuh wrote:
> Hi.
> I updated my ports, including xf86-video-intel to 2.7.1and the other
> X-related ports.
> The chipset is an Mobile Intel GM45 Express.
>
> The server is mostly stable. But moving large videos around different
> screens is still crashing the servers, I think (but don't dare to
> test).
>
> Another issue is more enerving: Switching with Ctrl+Alt+F1 from the X
> server to ttyv0 causes an assertion to fail.
> Backtrace from gdb:
>
> #0  0x285e75e7 in kill () from /lib/libc.so.7
> [New Thread 28701140 (LWP 100239)]
> #1  0x284f8337 in raise () from /lib/libthr.so.3
> #2  0x285e616a in abort () from /lib/libc.so.7
> #3  0x285cc696 in __assert () from /lib/libc.so.7
> #4  0x28817951 in I830EmitFlush (pScrn=0x28706c00) at i830_batchbuffer.h:78
> 78          assert(pI830->batch_ptr != NULL);
> #5  0x28817bfc in I830Sync (pScrn=0x28706c00) at i830_accel.c:191
> 191        I830EmitFlush(pScrn);
> #6  0x288257c6 in I830LeaveVT (scrnIndex=0, flags=0) at i830_driver.c:3428
> 3428       I830Sync(pScrn);
> #7  0x080a56a8 in AbortDDX ()
> #8  0x0812d1dd in AbortServer ()
> #9  0x0812d7bf in FatalError ()
> #10 0x080bc3b3 in xf86SigHandler ()
> #11 <signal handler called>
> #12 0x286a0754 in free_block () from /usr/local/lib/libdrm_intel.so.1
> #13 0x286a098b in drm_intel_fake_bo_unreference_locked ()
>    from /usr/local/lib/libdrm_intel.so.1
> #14 0x286a0a82 in drm_intel_fake_bo_unreference ()
>    from /usr/local/lib/libdrm_intel.so.1
> #15 0x2869f3b6 in drm_intel_bo_unreference ()
>    from /usr/local/lib/libdrm_intel.so.1
> #16 0x28858574 in gen4_render_state_cleanup (pScrn=0x28706c00)
>     at i965_render.c:1725
> 1725        drm_intel_bo_unreference(render_state->vs_state_bo);
> #17 0x28825948 in I830LeaveVT (scrnIndex=0, flags=0) at i830_driver.c:3465
> 3465          gen4_render_state_cleanup(pScrn);
> #18 0x28825c38 in I830CloseScreen (scrnIndex=0, pScreen=0x28720a80)
>     at i830_driver.c:3677
> 3677          I830LeaveVT(scrnIndex, 0);
> #19 0x0814d6fe in RRExtensionInit ()
> #20 0x080c330e in xf86ChangeGammaRamp ()
> #21 0x080bbec4 in xf86DPMSInit ()
> #22 0x2861dff4 in XvCloseScreen ()
>    from /usr/local/lib/xorg/modules/extensions//libextmod.so
> #23 0x080d2d0c in xf86XvMCCreateAdaptorRec ()
> #24 0x2862309d in XvMCCloseScreen ()
>    from /usr/local/lib/xorg/modules/extensions//libextmod.so
> #25 0x080bfec1 in VidModeExtensionInit ()
> #26 0x08138cf5 in XFixesCursorInit ()
> #27 0x081675ec in AnimCurInit ()
> #28 0x08132c6b in CompositeExtensionInit ()
> #29 0x286676da in glxCloseScreen ()
>    from /usr/local/lib/xorg/modules/extensions//libglx.so
> #30 0x0806bfb5 in main ()
>
> Does anybody have a workaround other than downgrading to 2.5.1?
> BTW: Disabling the assertion and executing the block in I830EmitFlush
> only when batch_ptr != NULL does not help... ;-)

I had this problem also.  After switching to VT from X session the server 
crushed with the error:
Assertion failed: (pI830->batch_ptr != NULL), function intel_batch_emit_dword, 
file i830_batchbuffer.h, line 78.

For me the problem was resolved with update ports tree (include new version of 
Mesa 7.4.2) and portupgrade -Rf xorg-server. But I don`t know what exactly 
resolve the problem, new mesa or some ports inconsistency.

Thanks,
Sergey.
>
> Regards
>
> Lucius
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"


From edwin at FreeBSD.org  Mon May 18 10:50:12 2009
From: edwin at FreeBSD.org (edwin@FreeBSD.org)
Date: Mon May 18 10:50:24 2009
Subject: ports/134643: [patch] x11-servers/xorg-server - Unbreak Xorg
	7.4 server
Message-ID: <200905181050.n4IAoBg8049189@freefall.freebsd.org>

Synopsis: [patch] x11-servers/xorg-server - Unbreak Xorg 7.4 server

Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-x11
Responsible-Changed-By: edwin
Responsible-Changed-When: Mon May 18 10:50:11 UTC 2009
Responsible-Changed-Why: 
Over to maintainer (via the GNATS Auto Assign Tool)

http://www.freebsd.org/cgi/query-pr.cgi?pr=134643
From bugmaster at FreeBSD.org  Mon May 18 11:07:04 2009
From: bugmaster at FreeBSD.org (FreeBSD bugmaster)
Date: Mon May 18 11:09:57 2009
Subject: Current problem reports assigned to freebsd-x11@FreeBSD.org
Message-ID: <200905181107.n4IB73XJ075858@freefall.freebsd.org>

Note: to view an individual PR, use:
  http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.


S Tracker      Resp.      Description
--------------------------------------------------------------------------------
o ports/134643 x11        [patch] x11-servers/xorg-server - Unbreak Xorg 7.4 ser
o ports/134244 x11        x11/xorg: "intel" driver for Xorg is very broken
o ports/134194 x11        graphics/dri fail on 7.2-RELEASE amd64
o ports/134132 x11        x11-servers/xorg-server: Intel i845 - xorg.conf with U
o ports/134082 x11        x11/xdriinfo: xdriinfo-1.0.2 build fail
o ports/133946 x11        x11-servers/xorg-server [patch] X crashes in xinerama 
o ports/133609 x11        x11/xorg crashes with vlc, intel video driver
o ports/133482 x11        x11/libXext "Generic Event Extension not available" er
o ports/133465 x11        x11/xorg: X crashes with mplayer -vo xv with xf86-vide
o ports/133419 x11        Unable to build x11-drivers/xf86-video-nsc
o ports/133175 x11        [patch] x11/pixman: enable SSE2 support autodetection
o ports/132621 x11        x11/xorg tries to install event when deselected
o ports/132403 x11        x11/xorg with Radeon X600 (R370): cannot re-initialize
o ports/132100 x11        x11/xorg: Xorg server forgets pointer map after xlock
o ports/132041 x11        x11/xorg: Broken Intel video driver
o ports/131930 x11        [PATCH] x11-servers/xorg-server coredumps on exit
o ports/131726 x11        x11-servers/xorg-server: xorg server messes with my eh
o ports/131696 x11        x11-servers/xorg-server: hald core dumps make X11 unus
o ports/131016 x11        x11/xorg - xorg-7.4 renders system unusable!
f ports/126812 x11        x11-drivers/xf86-video-ati - System freeze when exitin
o ports/125883 x11        x11-fonts/xorg-fonts-cyrillic is installed, but fonts 
f ports/123137 x11        x11/libX11: missing ru_RU.UTF-8 locale
o ports/122830 x11        x11/xorg: Error in I830WaitLpRing()
s ports/117907 x11        x11-servers/mga_hal broken on 7.0-BETA (GLIBC error)
o ports/116443 x11        x11-drivers/xf86-input-keyboard patch for USB jp106 ke

25 problems total.

From peterjeremy at optushome.com.au  Mon May 18 11:30:06 2009
From: peterjeremy at optushome.com.au (Peter Jeremy)
Date: Mon May 18 11:30:19 2009
Subject: ports/131930: [PATCH] x11-servers/xorg-server coredumps on exit
Message-ID: <200905181130.n4IBU63F006685@freefall.freebsd.org>

The following reply was made to PR ports/131930; it has been noted by GNATS.

From: Peter Jeremy <peterjeremy@optushome.com.au>
To: FreeBSD-gnats-submit@freebsd.org, freebsd-ports-bugs@freebsd.org
Cc:  
Subject: Re: ports/131930: [PATCH] x11-servers/xorg-server coredumps on exit
Date: Mon, 18 May 2009 21:26:43 +1000

 --6TrnltStXW4iwmi0
 Content-Type: text/plain; charset=us-ascii
 Content-Disposition: inline
 Content-Transfer-Encoding: quoted-printable
 
 I am no longer able to reproduce the core-dump on a stock
 xorg-server-1.6.1,1 so I believe the problem has been resolved
 upstream (though in a different fashion to my patch).
 
 --=20
 Peter Jeremy
 
 --6TrnltStXW4iwmi0
 Content-Type: application/pgp-signature
 Content-Disposition: inline
 
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.11 (FreeBSD)
 
 iEYEARECAAYFAkoRRfMACgkQ/opHv/APuIeRVgCgp36uMOHLZYssQyMsgYch3kyJ
 KgYAoK3ZXksgsJNt8e1FnDNhqlmg+pT6
 =lMce
 -----END PGP SIGNATURE-----
 
 --6TrnltStXW4iwmi0--
From jguojun at gmail.com  Mon May 18 13:07:41 2009
From: jguojun at gmail.com (Jin Guojun[VFF])
Date: Mon May 18 13:08:13 2009
Subject: kdb and mouse are disabled on HP Pavilion dv5210us by X.org 7.4.1
 (7.2-R)
Message-ID: <4A104825.8060509@gmail.com>

When installed FreeBSD 7.2 release with xorg-7.4.1, the X server does 
not work on
HP Pavilion dv5210us laptop due to the key board and mouse are disabled 
somehow.
Some Hot keys (Ctrl-Altr-F#) are working but mouse is not movable and 
cannot type in a Xterm.

(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 
'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0

Does anyone hasve an idea how to fix this problem?
Both Xorg.0.log and xorg.conf are attached.

Thanks,
-Jin
-------------- next part --------------

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.2-PRERELEASE i386 
Current Operating System: FreeBSD mobile32.Belkin 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May  1 08:49:13 UTC 2009     root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Build Date: 22 April 2009  02:40:51PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 17 10:02:22 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	built-ins
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x6a0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(--) PCI:*(0@1:5:0) ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE) rev 0, Mem @ 0xc8000000/134217728, 0xc0100000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/65536
(II) System resource ranges:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "radeon"
(II) Loading /usr/local/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 6.12.2
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
	ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
	ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
	ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
	ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
	ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
	ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
	ATI Mobility RADEON M98, ATI Radeon 4800 Series,
	ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
	ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
	ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
	ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
	ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
	ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
	ATI Mobility Radeon 4500 Series, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
	ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
	ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
	ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
	ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
	ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
	ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
	ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
	ATI Radeon HD Graphics, ATI Radeon Graphics,
	ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
	ATI Radeon Graphics
(II) Primary Device is: PCI 01@00:05:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[4] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[5] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[9] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000c0100000
(II) RADEON(0): MMIO registers at 0x00000000c0100000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/local/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon XPRESS 200M 5955 (PCIE)" (ChipID = 0x5955)
(--) RADEON(0): Linear framebuffer at 0x00000000c8000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(==) RADEON(0): Write-combining range (0xa0000,0x20000) was already clear
(==) RADEON(0): Write-combining range (0xc0000,0x40000) was already clear
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(==) RADEON(0): Write-combining range (0x0,0x1000) was already clear
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(II) RADEON(0): Direct rendering experimental on RS400/Xpress 200 enabled
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 100, max_in_pll: 1350, xclk: 25000, sclk: 300.000000, mclk: 250.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=6 min=20000 max=40000; xclk=25000
(II) RADEON(0): Panel ID string: LPL                     
(II) RADEON(0): Panel Size from BIOS: 1280x800
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 71250
HBlank: 160, HOverPlus: 48, HSyncWidth: 32
VBlank: 23, VOverPlus: 2, VSyncWidth: 6
(WW) RADEON(0): LCD DDC Info Table found!
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL PAL-M 
(II) RADEON(0): Port0:
  XRANDR name: VGA-0
  Connector: VGA
  CRT1: INTERNAL_DAC2
  DDC reg: 0x68
(II) RADEON(0): Port1:
  XRANDR name: LVDS
  Connector: LVDS
  LCD1: INTERNAL_LVDS
  DDC reg: 0x1a0
(II) RADEON(0): Port2:
  XRANDR name: S-video
  Connector: S-video
  TV1: INTERNAL_DAC2
  DDC reg: 0x0
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LPL  Model: 2a00  Serial#: 0
(II) RADEON(0): Year: 2005  Week: 0
(II) RADEON(0): EDID Version: 1.2
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.344   greenX: 0.323 greenY: 0.534
(II) RADEON(0): blueX: 0.156 blueY: 0.138   whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.2 MHz   Image Size:  330 x 210 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800  v_sync: 802  v_sync_end 808 v_blanking: 823 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block 0
(II) RADEON(0):  LGPhilipsLCD
(II) RADEON(0):  LP154W01-TLAE
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff00320c002a00000000
(II) RADEON(0): 	000f0102802115780a0f109758528828
(II) RADEON(0): 	23505400000001010101010101010101
(II) RADEON(0): 	010101010101d51b00a0502017303020
(II) RADEON(0): 	26002115100000190000000000000000
(II) RADEON(0): 	00000000000000000000000000fe004c
(II) RADEON(0): 	475068696c6970734c43440a000000fe
(II) RADEON(0): 	004c503135345730312d544c414500cb
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LPL  Model: 2a00  Serial#: 0
(II) RADEON(0): Year: 2005  Week: 0
(II) RADEON(0): EDID Version: 1.2
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.344   greenX: 0.323 greenY: 0.534
(II) RADEON(0): blueX: 0.156 blueY: 0.138   whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.2 MHz   Image Size:  330 x 210 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800  v_sync: 802  v_sync_end 808 v_blanking: 823 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block 0
(II) RADEON(0):  LGPhilipsLCD
(II) RADEON(0):  LP154W01-TLAE
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff00320c002a00000000
(II) RADEON(0): 	000f0102802115780a0f109758528828
(II) RADEON(0): 	23505400000001010101010101010101
(II) RADEON(0): 	010101010101d51b00a0502017303020
(II) RADEON(0): 	26002115100000190000000000000000
(II) RADEON(0): 	00000000000000000000000000fe004c
(II) RADEON(0): 	475068696c6970734c43440a000000fe
(II) RADEON(0): 	004c503135345730312d544c414500cb
(II) RADEON(0): EDID vendor "LPL", prod id 10752
(II) RADEON(0):     EDID quirk: Detailed timings give sizes in cm.
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/local/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.2.1
	ABI class: X.Org Video Driver, version 5.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(==) RADEON(0): Write-combining range (0x0,0x1000) was already clear
(!!) RADEON(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[4] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[5] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[9] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) RADEON(0): RADEONScreenInit c8000000 0 0
(==) RADEON(0): Write-combining range (0xa0000,0x10000) was already clear
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable LVDS
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x08000000
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1280,1202)
(II) RADEON(0): Largest offscreen area available: 1280 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1838000
(II) RADEON(0): Will use depth buffer at offset 0x1e14000
(II) RADEON(0): Will use 94208 kb for textures at offset 0x23f0000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xc8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xd18ca000
(II) RADEON(0): [pci] ring handle = 0xd18ca000
(II) RADEON(0): [pci] Ring mapped at 0x28a50000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xd19cb000
(II) RADEON(0): [pci] Ring read ptr mapped at 0x286e1000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xd19cc000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x30c00000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xd1bcc000
(II) RADEON(0): [pci] GART Texture map mapped at 0x30fcc000
(II) RADEON(0): [drm] register handle = 0xc0100000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 17
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0x1fff1800 is: 0x1fff1800
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0x21ff2000
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x21ff2000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 3
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x005de800
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x005e3800
(II) RADEON(0): Largest offscreen area available: 1280 x 6981
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/local/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
disable TVDAC
disable LVDS
disable TV
disable LVDS
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x21ff2000
restore common
restore crtc1
restore pll1
set RMX
set LVDS
enable LVDS
disable TVDAC
disable TV
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 330 x 210
disable LVDS
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
(==) RADEON(0): Write-combining range (0xa0000,0x10000) was already clear
(II) RADEON(0): Dynamic Clock Scaling Disabled
disable TVDAC
disable LVDS
disable TV
disable LVDS
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x21ff2000
restore common
restore crtc1
restore pll1
set RMX
set LVDS
enable LVDS
disable TVDAC
disable TV
(II) RADEON(0): [RESUME] Attempting to re-init Radeon hardware.
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0x1fff1800 is: 0x1fff1800
(WW) RADEON(0):   MC_AGP_LOCATION was: 0x21ff2000 is: 0x21ff2000
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x21ff2000
disable LVDS
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
(==) RADEON(0): Write-combining range (0xa0000,0x10000) was already clear
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xc301c000 at 0x286df000
(II) RADEON(0): [drm] Closed DRM master.
-------------- next part --------------
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/local/lib/xorg/modules"
	FontPath     "/usr/local/lib/X11/fonts/misc/"
	FontPath     "/usr/local/lib/X11/fonts/TTF/"
	FontPath     "/usr/local/lib/X11/fonts/OTF"
	FontPath     "/usr/local/lib/X11/fonts/Type1/"
	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "dri2"
	Load  "extmod"
	Load  "glx"
	Load  "record"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/sysmouse"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	#DisplaySize	  330   210	# mm
	Identifier   "Monitor0"
	VendorName   "LPL"
	ModelName    "2a00"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "FBTexPercent"       	# <i>
        #Option     "DepthBits"          	# <i>
        #Option     "PCIAPERSize"        	# <i>
        #Option     "AccelDFS"           	# [<bool>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "RageTheatreCrystal" 	# <i>
        #Option     "RageTheatreTunerPort" 	# <i>
        #Option     "RageTheatreCompositePort" 	# <i>
        #Option     "RageTheatreSVideoPort" 	# <i>
        #Option     "TunerType"          	# <i>
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# <i>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "DynamicClocks"      	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ConnectorTable"     	# <str>
        #Option     "DefaultConnectorTable" 	# [<bool>]
        #Option     "DefaultTMDSPLL"     	# [<bool>]
        #Option     "TVDACLoadDetect"    	# [<bool>]
        #Option     "ForceTVOut"         	# [<bool>]
        #Option     "TVStandard"         	# <str>
        #Option     "IgnoreLidStatus"    	# [<bool>]
        #Option     "DefaultTVDACAdj"    	# [<bool>]
        #Option     "Int10"              	# [<bool>]
        #Option     "EXAVSync"           	# [<bool>]
        #Option     "ATOMTVOut"          	# [<bool>]
        #Option     "R4xxATOM"           	# [<bool>]
	Identifier  "Card0"
	Driver      "radeon"
	VendorName  "ATI Technologies Inc"
	BoardName   "Radeon XPRESS 200M 5955 (PCIE)"
	BusID       "PCI:1:5:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

-------------- next part --------------
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
From chuckop at gmail.com  Mon May 18 13:07:47 2009
From: chuckop at gmail.com (Charles Oppermann)
Date: Mon May 18 13:09:20 2009
Subject: kdb and mouse are disabled on HP Pavilion dv5210us by X.org
 7.4.1 (7.2-R)
In-Reply-To: <4A104825.8060509@gmail.com>
References: <4A104825.8060509@gmail.com>
Message-ID: <4A10984E.6070103@gmail.com>

Jin Guojun[VFF] wrote:
> When installed FreeBSD 7.2 release with xorg-7.4.1, the X server does 
> not work on
> HP Pavilion dv5210us laptop due to the key board and mouse are disabled 
> somehow.
> Some Hot keys (Ctrl-Altr-F#) are working but mouse is not movable and 
> cannot type in a Xterm.

A quick search should indicate the solution.  Xorg prefers using HALD 
for hardware access.  If the Hal Daemon isn't running, regular 
keyboard/mouse input won't work.

You can add the following to /etc/rc.conf to automatically start the HAL 
and DBus daemons:

dbus_enable="YES"
hald_enable="YES"

After adding, use the following commands to start the services:

/usr/local/etc/rc.d/dbus start
/user/local/etc/rc.d/hald start

Alternatively, you can add the following line to the ServerLayout 
section of your /etc/X11/xorg.conf file:

Option "AllowEmptyInput" "false"

Hope this helps.

_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"

From jguojun at gmail.com  Mon May 18 13:07:54 2009
From: jguojun at gmail.com (Jin Guojun[VFF])
Date: Mon May 18 13:10:10 2009
Subject: kdb and mouse are disabled on HP Pavilion dv5210us by X.org 7.4.1
 (7.2-R)
Message-ID: <4A104825.8060509@gmail.com>

When installed FreeBSD 7.2 release with xorg-7.4.1, the X server does 
not work on
HP Pavilion dv5210us laptop due to the key board and mouse are disabled 
somehow.
Some Hot keys (Ctrl-Altr-F#) are working but mouse is not movable and 
cannot type in a Xterm.

(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 
'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0

Does anyone hasve an idea how to fix this problem?
Both Xorg.0.log and xorg.conf are attached.

Thanks,
-Jin
-------------- next part --------------

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.2-PRERELEASE i386 
Current Operating System: FreeBSD mobile32.Belkin 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May  1 08:49:13 UTC 2009     root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
Build Date: 22 April 2009  02:40:51PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 17 10:02:22 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	built-ins
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x6a0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(--) PCI:*(0@1:5:0) ATI Technologies Inc Radeon XPRESS 200M 5955 (PCIE) rev 0, Mem @ 0xc8000000/134217728, 0xc0100000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/65536
(II) System resource ranges:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "radeon"
(II) Loading /usr/local/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 6.12.2
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
	ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
	ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
	ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
	ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
	ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
	ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
	ATI Mobility RADEON M98, ATI Radeon 4800 Series,
	ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
	ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
	ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
	ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
	ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
	ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
	ATI Mobility Radeon 4500 Series, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
	ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
	ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
	ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
	ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
	ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
	ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
	ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
	ATI Radeon HD Graphics, ATI Radeon Graphics,
	ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
	ATI Radeon Graphics
(II) Primary Device is: PCI 01@00:05:0
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[4] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[5] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[9] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000c0100000
(II) RADEON(0): MMIO registers at 0x00000000c0100000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/local/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon XPRESS 200M 5955 (PCIE)" (ChipID = 0x5955)
(--) RADEON(0): Linear framebuffer at 0x00000000c8000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(==) RADEON(0): Write-combining range (0xa0000,0x20000) was already clear
(==) RADEON(0): Write-combining range (0xc0000,0x40000) was already clear
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(==) RADEON(0): Write-combining range (0x0,0x1000) was already clear
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(II) RADEON(0): Direct rendering experimental on RS400/Xpress 200 enabled
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1200
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 100, max_in_pll: 1350, xclk: 25000, sclk: 300.000000, mclk: 250.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=6 min=20000 max=40000; xclk=25000
(II) RADEON(0): Panel ID string: LPL                     
(II) RADEON(0): Panel Size from BIOS: 1280x800
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 71250
HBlank: 160, HOverPlus: 48, HSyncWidth: 32
VBlank: 23, VOverPlus: 2, VSyncWidth: 6
(WW) RADEON(0): LCD DDC Info Table found!
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL PAL-M 
(II) RADEON(0): Port0:
  XRANDR name: VGA-0
  Connector: VGA
  CRT1: INTERNAL_DAC2
  DDC reg: 0x68
(II) RADEON(0): Port1:
  XRANDR name: LVDS
  Connector: LVDS
  LCD1: INTERNAL_LVDS
  DDC reg: 0x1a0
(II) RADEON(0): Port2:
  XRANDR name: S-video
  Connector: S-video
  TV1: INTERNAL_DAC2
  DDC reg: 0x0
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LPL  Model: 2a00  Serial#: 0
(II) RADEON(0): Year: 2005  Week: 0
(II) RADEON(0): EDID Version: 1.2
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.344   greenX: 0.323 greenY: 0.534
(II) RADEON(0): blueX: 0.156 blueY: 0.138   whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.2 MHz   Image Size:  330 x 210 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800  v_sync: 802  v_sync_end 808 v_blanking: 823 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block 0
(II) RADEON(0):  LGPhilipsLCD
(II) RADEON(0):  LP154W01-TLAE
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff00320c002a00000000
(II) RADEON(0): 	000f0102802115780a0f109758528828
(II) RADEON(0): 	23505400000001010101010101010101
(II) RADEON(0): 	010101010101d51b00a0502017303020
(II) RADEON(0): 	26002115100000190000000000000000
(II) RADEON(0): 	00000000000000000000000000fe004c
(II) RADEON(0): 	475068696c6970734c43440a000000fe
(II) RADEON(0): 	004c503135345730312d544c414500cb
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: LPL  Model: 2a00  Serial#: 0
(II) RADEON(0): Year: 2005  Week: 0
(II) RADEON(0): EDID Version: 1.2
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33  vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.344   greenX: 0.323 greenY: 0.534
(II) RADEON(0): blueX: 0.156 blueY: 0.138   whiteX: 0.312 whiteY: 0.328
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 71.2 MHz   Image Size:  330 x 210 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) RADEON(0): v_active: 800  v_sync: 802  v_sync_end 808 v_blanking: 823 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block 0
(II) RADEON(0):  LGPhilipsLCD
(II) RADEON(0):  LP154W01-TLAE
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff00320c002a00000000
(II) RADEON(0): 	000f0102802115780a0f109758528828
(II) RADEON(0): 	23505400000001010101010101010101
(II) RADEON(0): 	010101010101d51b00a0502017303020
(II) RADEON(0): 	26002115100000190000000000000000
(II) RADEON(0): 	00000000000000000000000000fe004c
(II) RADEON(0): 	475068696c6970734c43440a000000fe
(II) RADEON(0): 	004c503135345730312d544c414500cb
(II) RADEON(0): EDID vendor "LPL", prod id 10752
(II) RADEON(0):     EDID quirk: Detailed timings give sizes in cm.
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/local/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.2.1
	ABI class: X.Org Video Driver, version 5.0
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(==) RADEON(0): Write-combining range (0x0,0x1000) was already clear
(!!) RADEON(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[4] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[5] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[6] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[7] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[8] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[9] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) RADEON(0): RADEONScreenInit c8000000 0 0
(==) RADEON(0): Write-combining range (0xa0000,0x10000) was already clear
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable LVDS
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() : 
(II) RADEON(0):   mem_size         : 0x08000000
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1200) to (1280,1202)
(II) RADEON(0): Largest offscreen area available: 1280 x 6989
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1838000
(II) RADEON(0): Will use depth buffer at offset 0x1e14000
(II) RADEON(0): Will use 94208 kb for textures at offset 0x23f0000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xc8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xd18ca000
(II) RADEON(0): [pci] ring handle = 0xd18ca000
(II) RADEON(0): [pci] Ring mapped at 0x28a50000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xd19cb000
(II) RADEON(0): [pci] Ring read ptr mapped at 0x286e1000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xd19cc000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x30c00000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xd1bcc000
(II) RADEON(0): [pci] GART Texture map mapped at 0x30fcc000
(II) RADEON(0): [drm] register handle = 0xc0100000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 17
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0x1fff1800 is: 0x1fff1800
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0x21ff2000
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x21ff2000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 3
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x005de800
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x005e3800
(II) RADEON(0): Largest offscreen area available: 1280 x 6981
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/local/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
disable TVDAC
disable LVDS
disable TV
disable LVDS
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x21ff2000
restore common
restore crtc1
restore pll1
set RMX
set LVDS
enable LVDS
disable TVDAC
disable TV
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 330 x 210
disable LVDS
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
(==) RADEON(0): Write-combining range (0xa0000,0x10000) was already clear
(II) RADEON(0): Dynamic Clock Scaling Disabled
disable TVDAC
disable LVDS
disable TV
disable LVDS
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x21ff2000
restore common
restore crtc1
restore pll1
set RMX
set LVDS
enable LVDS
disable TVDAC
disable TV
(II) RADEON(0): [RESUME] Attempting to re-init Radeon hardware.
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0x1fff1800 is: 0x1fff1800
(WW) RADEON(0):   MC_AGP_LOCATION was: 0x21ff2000 is: 0x21ff2000
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x21ff2000
disable LVDS
(II) RADEON(0): RADEONRestoreMemMapRegisters() : 
(II) RADEON(0):   MC_FB_LOCATION   : 0x1fff1800 0x1fff1800
(II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
(==) RADEON(0): Write-combining range (0xa0000,0x10000) was already clear
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xc301c000 at 0x286df000
(II) RADEON(0): [drm] Closed DRM master.
-------------- next part --------------
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/local/lib/xorg/modules"
	FontPath     "/usr/local/lib/X11/fonts/misc/"
	FontPath     "/usr/local/lib/X11/fonts/TTF/"
	FontPath     "/usr/local/lib/X11/fonts/OTF"
	FontPath     "/usr/local/lib/X11/fonts/Type1/"
	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "dri2"
	Load  "extmod"
	Load  "glx"
	Load  "record"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/sysmouse"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	#DisplaySize	  330   210	# mm
	Identifier   "Monitor0"
	VendorName   "LPL"
	ModelName    "2a00"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# <i>
        #Option     "AGPMode"            	# <i>
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# <i>
        #Option     "GARTSize"           	# <i>
        #Option     "RingSize"           	# <i>
        #Option     "BufferSize"         	# <i>
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "FBTexPercent"       	# <i>
        #Option     "DepthBits"          	# <i>
        #Option     "PCIAPERSize"        	# <i>
        #Option     "AccelDFS"           	# [<bool>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# <i>
        #Option     "RageTheatreCrystal" 	# <i>
        #Option     "RageTheatreTunerPort" 	# <i>
        #Option     "RageTheatreCompositePort" 	# <i>
        #Option     "RageTheatreSVideoPort" 	# <i>
        #Option     "TunerType"          	# <i>
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# <i>
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "DynamicClocks"      	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ConnectorTable"     	# <str>
        #Option     "DefaultConnectorTable" 	# [<bool>]
        #Option     "DefaultTMDSPLL"     	# [<bool>]
        #Option     "TVDACLoadDetect"    	# [<bool>]
        #Option     "ForceTVOut"         	# [<bool>]
        #Option     "TVStandard"         	# <str>
        #Option     "IgnoreLidStatus"    	# [<bool>]
        #Option     "DefaultTVDACAdj"    	# [<bool>]
        #Option     "Int10"              	# [<bool>]
        #Option     "EXAVSync"           	# [<bool>]
        #Option     "ATOMTVOut"          	# [<bool>]
        #Option     "R4xxATOM"           	# [<bool>]
	Identifier  "Card0"
	Driver      "radeon"
	VendorName  "ATI Technologies Inc"
	BoardName   "Radeon XPRESS 200M 5955 (PCIE)"
	BusID       "PCI:1:5:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

-------------- next part --------------
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
From bennett at cs.niu.edu  Mon May 18 13:58:21 2009
From: bennett at cs.niu.edu (Scott Bennett)
Date: Mon May 18 13:58:28 2009
Subject: X questions before installing FreeBSD 7.2
Message-ID: <200905181358.n4IDwIVa024836@mp.cs.niu.edu>

     On Sun, 17 May 2009 09:38:52 -0700 (PDT) "David Johnson"
<david@usermode.org> wrote:
>>      My questions before getting started later today run like this.
>>
>> 	a) What exactly is supported in the version of X.org distributed with
>> 	   FreeBSD 7.2-RELEASE for this Mobility Radeon 9800 card, given the
>> 	   chip set(s), the screen capabilities, 256 MB on the card, and
>> 	   anything else you happen to notice in the excerpts above?
>
>You only had excerpts from Xorg.log, but xorg-7.4 with Radeon 9800 (using
>radeon driver) should have hardware acceleration, OpenGL and compositing.
>You just need to configure your xorg.conf file correctly. The driver for
>the r300 chipset should be very stable.

     So the r300 driver is the one that supports the R420 chip and its mobile
equivalent, the M18 chip?
>
>> 	b) What sort of DPMS stuff works and what doesn't?  Under 6.9.0, the
>> 	   xscreenserver-demo can be told to shut the screen off after a
>> 	   specified period of disuse, and it will do so.  Unfortunately, it
>> 	   doesn't offer any method of turning the screen back on again, so
>> 	   one has to reboot to get it to work again.  Working with a dead
>> 	   screen pretty much means shutting the system off (i.e., crashing
>> 	   it) and then powering up again.
>
>I haven't seen that at all. I just jiggle the mouse or tab a key, and the
>screen comes back in about five seconds.

     Oh, good.  I had the LCD screen replaced several months ago because the
CCFL had gotten rather dim, still usable but not optimal.  I'd like to slow
the similar aging of the replacement screen if possible because since the
replacement occurred, the service contract expired, so further replacements
would be very pricey. :-}
>
>> 	c) What other problems are known to occur with this hardware under
>> 	   FreeBSD 7.2-RELEASE and its pre-installed X.org software?
>
>I have a tiny problem with my Radeon X1550, but it only happens with
>regards to AIGLX and I'm fairly sure it only affects certain r500 chipset
>cards.
>
     Okay.  Thanks very much for your reply.  It was the only one so far.
I delayed the installation while waiting to see any replies, but I'll probably
proceed with it tonight or tomorrow.


                                  Scott Bennett, Comm. ASMELG, CFIAG
**********************************************************************
* Internet:       bennett at cs.niu.edu                              *
*--------------------------------------------------------------------*
* "A well regulated and disciplined militia, is at all times a good  *
* objection to the introduction of that bane of all free governments *
* -- a standing army."                                               *
*    -- Gov. John Hancock, New York Journal, 28 January 1790         *
**********************************************************************
From saifi.khan at twincling.org  Mon May 18 15:37:14 2009
From: saifi.khan at twincling.org (Saifi Khan)
Date: Mon May 18 15:37:26 2009
Subject: kdb and mouse are disabled on HP Pavilion dv5210us by X.org
 7.4.1 (7.2-R)
In-Reply-To: <4A104825.8060509@gmail.com>
References: <4A104825.8060509@gmail.com>
Message-ID: <Pine.LNX.4.64.0905182037290.20487@localhost>

On Sun, 17 May 2009, Jin Guojun[VFF] wrote:

> When installed FreeBSD 7.2 release with xorg-7.4.1, the X server does not work
> on
> HP Pavilion dv5210us laptop due to the key board and mouse are disabled
> somehow.
> Some Hot keys (Ctrl-Altr-F#) are working but mouse is not movable and cannot
> type in a Xterm.
> 
> (**) ModulePath set to "/usr/local/lib/xorg/modules"
> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse'
> will be disabled.
> (WW) Disabling Mouse0
> (WW) Disabling Keyboard0
> 
> Does anyone hasve an idea how to fix this problem?
> Both Xorg.0.log and xorg.conf are attached.
> 
> Thanks,
> -Jin
> 

Hi Jin:

You need to add an additional line to your 'ServerLayout' or
'ServerFlags'.

	Option	"AllowEmptyInput" "false"

Please see the sample xorg.conf file that i'm running on my
Compaq laptop.


Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Keyboard0" "CoreKeyboard"
	InputDevice    "Mouse0" "CorePointer"
#	InputDevice    "Mouse1" "SendCoreEvents"
EndSection

Section "ServerFlags"
	Option	"DontZap" "Off"
	Option	"AllowEmptyInput" "false"
	Option	"AllowEmptyInput" "false"
#	Option	"AllowMouseOpenFail"	"on"
EndSection

Section "Files"
	FontPath	"unix/:7101"
	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
	FontPath     "/usr/local/lib/X11/fonts/OTF"
	FontPath     "/usr/local/lib/X11/fonts/TTF/"
	FontPath     "/usr/local/lib/X11/fonts/Type1/"
	FontPath     "/usr/local/lib/X11/fonts/URW/"
	FontPath     "/usr/local/lib/X11/fonts/bistream-vera/"
	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
	FontPath     "/usr/local/lib/X11/fonts/dejavu/"
	FontPath     "/usr/local/lib/X11/fonts/freefont/"
	FontPath     "/usr/local/lib/X11/fonts/local/"
	FontPath     "/usr/local/lib/X11/fonts/misc/"
	FontPath     "/usr/local/lib/X11/fonts/terminus-font/"
	FontPath     "/usr/local/lib/X11/fonts/urwfonts-ttf/"
	FontPath     "/usr/local/lib/X11/fonts/util/"
	FontPath     "/usr/local/lib/X11/fonts/webfonts/"
	FontPath     "/usr/local/share/ghostscript/fonts/"
	FontPath 	 "/usr/local/lib/X11/fonts/sharefont/"
	FontPath 	 "/usr/local/lib/X11/fonts/texcm-ttf/"
	FontPath 	 "/usr/local/lib/X11/fonts/local/sgi/"
	FontPath 	 "/usr/local/lib/X11/fonts/ppantsfonts/"
	ModulePath   "/usr/local/lib/xorg/modules"
EndSection


Section "Module"
	Load  "extmod"
	Load  "record"
	Load  "dbe"
	Load  "glx"
	Load  "dri"
	Load  "dri2"
	Load	"freetype"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	"Protocol"	"Standard"
	Option	"XkbLayout"	"us"
	Option	"XkbModel"	"pc104"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/sysmouse"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "InputDevice"
	Identifier  "Mouse1"
	Driver      "synaptics"
	Option	    "Device" "/dev/sysmouse"
	Option	"Emulate3Buttons"	"on"
	Option	"SHMConfig"	"on"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
	HorizSync    30-62
	VertRefresh  50-60
	Option       "DPMS"
EndSection

Section "Device"
	Identifier  "Card0"
	Driver      "intel"
	VendorName  "Intel Corporation"
	BoardName   "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
	BusID       "PCI:0:2:0"
	Option		"FramebufferCompression"	"false"
	Option		"AccelMethod"	"XAA"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	DefaultDepth 24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes     "1280x800" "1024x768" "800x600"
	EndSubSection
EndSection

#Section "DRI"
#	Group	"video"
#	Mode	0660
#EndSection

Additionally, it is required that you place the following
configurations in the /etc/rc.conf file

 hald_enable="YES"
 dbus_enable="YES"


thanks
Saifi.
From david at usermode.org  Mon May 18 16:13:07 2009
From: david at usermode.org (David Johnson)
Date: Mon May 18 16:13:13 2009
Subject: X questions before installing FreeBSD 7.2
In-Reply-To: <200905181358.n4IDwIVa024836@mp.cs.niu.edu>
References: <200905181358.n4IDwIVa024836@mp.cs.niu.edu>
Message-ID: <200905180909.39578.david@usermode.org>

On Monday 18 May 2009 06:58:18 am Scott Bennett wrote:
>      On Sun, 17 May 2009 09:38:52 -0700 (PDT) "David Johnson"
> >You only had excerpts from Xorg.log, but xorg-7.4 with Radeon 9800 (using
> >radeon driver) should have hardware acceleration, OpenGL and compositing.
> >You just need to configure your xorg.conf file correctly. The driver for
> >the r300 chipset should be very stable.
>
>      So the r300 driver is the one that supports the R420 chip and its
> mobile equivalent, the M18 chip?

According to the man page, the Radeon 9800 has a chipset in the R300 series. 
But regardless, both should be well supported. 

-- 
David Johnson
From wblock at wonkity.com  Mon May 18 18:14:21 2009
From: wblock at wonkity.com (Warren Block)
Date: Mon May 18 18:14:27 2009
Subject: X questions before installing FreeBSD 7.2
In-Reply-To: <200905181358.n4IDwIVa024836@mp.cs.niu.edu>
References: <200905181358.n4IDwIVa024836@mp.cs.niu.edu>
Message-ID: <alpine.BSF.2.00.0905181208260.80739@wonkity.com>

On Mon, 18 May 2009, Scott Bennett wrote:

>     On Sun, 17 May 2009 09:38:52 -0700 (PDT) "David Johnson"
> <david@usermode.org> wrote:
>>>      My questions before getting started later today run like this.
>>>
>>> 	a) What exactly is supported in the version of X.org distributed with
>>> 	   FreeBSD 7.2-RELEASE for this Mobility Radeon 9800 card, given the
>>> 	   chip set(s), the screen capabilities, 256 MB on the card, and
>>> 	   anything else you happen to notice in the excerpts above?
>>
>> You only had excerpts from Xorg.log, but xorg-7.4 with Radeon 9800 (using
>> radeon driver) should have hardware acceleration, OpenGL and compositing.
>> You just need to configure your xorg.conf file correctly. The driver for
>> the r300 chipset should be very stable.
>
>     So the r300 driver is the one that supports the R420 chip and its mobile
> equivalent, the M18 chip?

M18 is not mentioned in the radeon man page. 
http://dri.freedesktop.org/wiki/ATIRadeon shows the R420/M18 as 
equivalent, but says they are Radeon X800, not 9800.

-Warren Block * Rapid City, South Dakota USA
From david at usermode.org  Mon May 18 19:01:17 2009
From: david at usermode.org (David Johnson)
Date: Mon May 18 19:01:25 2009
Subject: X questions before installing FreeBSD 7.2
In-Reply-To: <alpine.BSF.2.00.0905181208260.80739@wonkity.com>
References: <200905181358.n4IDwIVa024836@mp.cs.niu.edu>
	<alpine.BSF.2.00.0905181208260.80739@wonkity.com>
Message-ID: <200905181158.33008.david@usermode.org>

On Monday 18 May 2009 11:14:05 am Warren Block wrote:
> M18 is not mentioned in the radeon man page.
> http://dri.freedesktop.org/wiki/ATIRadeon shows the R420/M18 as
> equivalent, but says they are Radeon X800, not 9800.

So 9800 is r300 and Radeon Mobility 9800 is r400? The end result should be the 
same though. Both are supported.

-- 
David Johnson
From rnoland at FreeBSD.org  Mon May 18 19:48:47 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Mon May 18 19:48:54 2009
Subject: X questions before installing FreeBSD 7.2
In-Reply-To: <200905181158.33008.david@usermode.org>
References: <200905181358.n4IDwIVa024836@mp.cs.niu.edu>
	<alpine.BSF.2.00.0905181208260.80739@wonkity.com>
	<200905181158.33008.david@usermode.org>
Message-ID: <1242676072.1752.1.camel@balrog.2hip.net>

On Mon, 2009-05-18 at 11:58 -0700, David Johnson wrote:
> On Monday 18 May 2009 11:14:05 am Warren Block wrote:
> > M18 is not mentioned in the radeon man page.
> > http://dri.freedesktop.org/wiki/ATIRadeon shows the R420/M18 as
> > equivalent, but says they are Radeon X800, not 9800.
> 
> So 9800 is r300 and Radeon Mobility 9800 is r400? The end result should be the 
> same though. Both are supported.

All of the 9800 variants that I see are treated as R350.

robert.

-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090518/3ff1f7ef/attachment.pgp
From lwindschuh at googlemail.com  Mon May 18 20:38:45 2009
From: lwindschuh at googlemail.com (Lucius Windschuh)
Date: Mon May 18 20:38:52 2009
Subject: xf86-video-intel: Crashes when switching VTs
In-Reply-To: <200905181055.43431.snasonov@bcc.ru>
References: <90a5caac0905171000xd0629bbl3f3baa5fe7d0f565@mail.gmail.com>
	<200905181055.43431.snasonov@bcc.ru>
Message-ID: <90a5caac0905181338t63ffa59ct9bc2a5886bdc6bcd@mail.gmail.com>

2009/5/18 Sergey G Nasonov <snasonov@bcc.ru>:
> I had this problem also. After switching to VT from X session the server
> crushed with the error:
> Assertion failed: (pI830->batch_ptr != NULL), function
> intel_batch_emit_dword, file i830_batchbuffer.h, line 78.
>
> For me the problem was resolved with update ports tree (include new version
> of Mesa 7.4.2) and portupgrade -Rf xorg-server. But I don`t know what
> exactly resolve the problem, new mesa or some ports inconsistency.

portupgrade -Rf xorg-server did it. Thanks.

Lucius
From peter at vk2pj.dyndns.org  Tue May 19 02:28:23 2009
From: peter at vk2pj.dyndns.org (Peter Jeremy)
Date: Tue May 19 02:28:30 2009
Subject: Whither X?
In-Reply-To: <20090516073016.414a683b@sorrow.ashke.com>
References: <20090515232350.GH57001@server.vk2pj.dyndns.org>
	<1242433708.5638.26.camel@balrog.2hip.net>
	<20090516110938.GA16230@server.vk2pj.dyndns.org>
	<20090516073016.414a683b@sorrow.ashke.com>
Message-ID: <20090519022817.GB97109@server.vk2pj.dyndns.org>

On 2009-May-16 07:30:16 -0400, Adam K Kirchhoff <adamk@voicenet.com> wrote:
>On Sat, 16 May 2009 21:09:38 +1000
>Peter Jeremy <peterjeremy@optushome.com.au> wrote:
>> I am not saying that.  I am saying that the Xorg project needs to stop
>> breaking existing functionality and unnecessarily changing existing
>> behaviour.  Things like inverting the sense of "DontZap" or making the
>> default screen blank with no cursor have no benefit and just waste
>> people's time.
>
>That hs been discussed a number of times on various mailing lists and
>forums.

But, AFAIR, not on any relevant FreeBSD lists.  As someone who wants
to _use_ X11 on FreeBSD, I should not need to follow the Xorg mailing
lists to learn about what has been broken in the latest release.
There are limits to how many different mailing lists I can follow...

>> project did some regression testing though
>
>They do.  Probably much more than you realize.

As an Xorg user, all I can say is that it doesn't show.  As I have
previously said, the sort of basic problems that are showing up with
X.org 7.3 and 7.4 were not apparent with XFree86 or Xorg 6.x.

-- 
Peter Jeremy
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090519/419fa2bf/attachment-0001.pgp
From bennett at cs.niu.edu  Tue May 19 03:46:45 2009
From: bennett at cs.niu.edu (Scott Bennett)
Date: Tue May 19 03:46:52 2009
Subject: X questions before installing FreeBSD 7.2
Message-ID: <200905190345.n4J3j32t004783@mp.cs.niu.edu>

     On Mon, 18 May 2009 14:47:52 -0500 Robert Noland <rnoland@FreeBSD.org>
wrote:
>On Mon, 2009-05-18 at 11:58 -0700, David Johnson wrote:
>> On Monday 18 May 2009 11:14:05 am Warren Block wrote:
>> > M18 is not mentioned in the radeon man page.
>> > http://dri.freedesktop.org/wiki/ATIRadeon shows the R420/M18 as
>> > equivalent, but says they are Radeon X800, not 9800.
>>=20
>> So 9800 is r300 and Radeon Mobility 9800 is r400? The end result should b=
>e the=20
>> same though. Both are supported.

     This sort of confusion is exactly what I had hoped to avoid by including
in my original posting the following lines from kernel initialization and the
xorg.0.log file.


pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
drm0: <ATI Radeon JN R420 Mobility M18> port 0xc000-0xc0ff mem 0xe0000000-0xefffffff,0xfcff0000-0xfcffffff irq 16 at device 0.0 on pci1
info: [drm] AGP at 0xf0000000 128MB
info: [drm] Initialized radeon 1.25.0 20060524


(II) Primary Device is: PCI 01:00:0
(--) Chipset ATI Radeon Mobility 9800 (M18) JN (AGP) found
>
>All of the 9800 variants that I see are treated as R350.
>
     Okay, that's good.  I am completely clueless as to what the differences
might be between an R350 and an R420/M18, nor do I have any idea of the
significance of "JN" in the above identification messages.  If the R350 code
in the r300 driver will work right, that's good enough for now, even if it
might not take full advantage of the differences between the different chip
models.
     Thanks again to all who have replied.  I'll give it a go.


                                  Scott Bennett, Comm. ASMELG, CFIAG
**********************************************************************
* Internet:       bennett at cs.niu.edu                              *
*--------------------------------------------------------------------*
* "A well regulated and disciplined militia, is at all times a good  *
* objection to the introduction of that bane of all free governments *
* -- a standing army."                                               *
*    -- Gov. John Hancock, New York Journal, 28 January 1790         *
**********************************************************************
From jguojun at gmail.com  Tue May 19 05:54:32 2009
From: jguojun at gmail.com (Jin Guojun[VFF])
Date: Tue May 19 05:54:45 2009
Subject: kdb and mouse are disabled on HP Pavilion dv5210us by X.org
 7.4.1 (7.2-R)
In-Reply-To: <Pine.LNX.4.64.0905182037290.20487@localhost>
References: <4A104825.8060509@gmail.com>
	<Pine.LNX.4.64.0905182037290.20487@localhost>
Message-ID: <4A124990.8070707@gmail.com>

Hi Saifi,

Xorg 7.4_1 seems having some issues with dbus and hald.
The --	Option	"AllowEmptyInput" "false" -- is the must, but dbus and hald can cause system useless.

On this laptop, I only run dbus and hald once. Then I disabled both of them and X window works well.

On a couple of Desktop machines (4-core Phenom and Intel P4+506) with GeForce graphic cards, without
dbus and halt, X Window run fine except no F-key works. Enable and run dbus and hald, All F-key work,
but output device is almost dead.

Top shows system is completely idle, but typing will not show on any xterm till the mouse is moving.

For example, run TOP on a xterm, the entire window system has no thing change. The clock of on the upper right
corner of the "TOP" xterm is stopped (actually is running, but no output to display). Once mouse is moving,
the clock and top section are updated. Once mouse stops moving, then no thing is change (no output anywhere).

Similar to the typing. Typing a command will not show on the Xterm still mouse is moved. About less than 5%
of time, I can type and see the output right way. Without dbus and hald running, there is no such problem.

Has anyone encountered the same problem?

The other main difference between this xorg.conf and previous on is the "Module" section.
This xorg.conf, generated by X -configure, has -- Load  "dri2" where previous one has -- Load  "GLcore". 
I am not sure if this is an issue.

-Jin


Saifi Khan wrote:

>On Sun, 17 May 2009, Jin Guojun[VFF] wrote:
>
>  
>
>>When installed FreeBSD 7.2 release with xorg-7.4.1, the X server does not work
>>on
>>HP Pavilion dv5210us laptop due to the key board and mouse are disabled
>>somehow.
>>Some Hot keys (Ctrl-Altr-F#) are working but mouse is not movable and cannot
>>type in a Xterm.
>>
>>(**) ModulePath set to "/usr/local/lib/xorg/modules"
>>(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse'
>>will be disabled.
>>(WW) Disabling Mouse0
>>(WW) Disabling Keyboard0
>>
>>Does anyone hasve an idea how to fix this problem?
>>Both Xorg.0.log and xorg.conf are attached.
>>
>>Thanks,
>>-Jin
>>
>>    
>>
>
>Hi Jin:
>
>You need to add an additional line to your 'ServerLayout' or
>'ServerFlags'.
>
>	Option	"AllowEmptyInput" "false"
>
>Please see the sample xorg.conf file that i'm running on my
>Compaq laptop.
>
>
>Section "ServerLayout"
>	Identifier     "X.org Configured"
>	Screen      0  "Screen0" 0 0
>	InputDevice    "Keyboard0" "CoreKeyboard"
>	InputDevice    "Mouse0" "CorePointer"
>#	InputDevice    "Mouse1" "SendCoreEvents"
>EndSection
>
>Section "ServerFlags"
>	Option	"DontZap" "Off"
>	Option	"AllowEmptyInput" "false"
>	Option	"AllowEmptyInput" "false"
>#	Option	"AllowMouseOpenFail"	"on"
>EndSection
>
>Section "Files"
>	FontPath	"unix/:7101"
>	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
>	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
>	FontPath     "/usr/local/lib/X11/fonts/OTF"
>	FontPath     "/usr/local/lib/X11/fonts/TTF/"
>	FontPath     "/usr/local/lib/X11/fonts/Type1/"
>	FontPath     "/usr/local/lib/X11/fonts/URW/"
>	FontPath     "/usr/local/lib/X11/fonts/bistream-vera/"
>	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
>	FontPath     "/usr/local/lib/X11/fonts/dejavu/"
>	FontPath     "/usr/local/lib/X11/fonts/freefont/"
>	FontPath     "/usr/local/lib/X11/fonts/local/"
>	FontPath     "/usr/local/lib/X11/fonts/misc/"
>	FontPath     "/usr/local/lib/X11/fonts/terminus-font/"
>	FontPath     "/usr/local/lib/X11/fonts/urwfonts-ttf/"
>	FontPath     "/usr/local/lib/X11/fonts/util/"
>	FontPath     "/usr/local/lib/X11/fonts/webfonts/"
>	FontPath     "/usr/local/share/ghostscript/fonts/"
>	FontPath 	 "/usr/local/lib/X11/fonts/sharefont/"
>	FontPath 	 "/usr/local/lib/X11/fonts/texcm-ttf/"
>	FontPath 	 "/usr/local/lib/X11/fonts/local/sgi/"
>	FontPath 	 "/usr/local/lib/X11/fonts/ppantsfonts/"
>	ModulePath   "/usr/local/lib/xorg/modules"
>EndSection
>
>
>Section "Module"
>	Load  "extmod"
>	Load  "record"
>	Load  "dbe"
>	Load  "glx"
>	Load  "dri"
>	Load  "dri2"
>	Load	"freetype"
>EndSection
>
>Section "InputDevice"
>	Identifier  "Keyboard0"
>	Driver      "kbd"
>	Option	"Protocol"	"Standard"
>	Option	"XkbLayout"	"us"
>	Option	"XkbModel"	"pc104"
>EndSection
>
>Section "InputDevice"
>	Identifier  "Mouse0"
>	Driver      "mouse"
>	Option	    "Protocol" "auto"
>	Option	    "Device" "/dev/sysmouse"
>	Option	    "ZAxisMapping" "4 5 6 7"
>EndSection
>
>Section "InputDevice"
>	Identifier  "Mouse1"
>	Driver      "synaptics"
>	Option	    "Device" "/dev/sysmouse"
>	Option	"Emulate3Buttons"	"on"
>	Option	"SHMConfig"	"on"
>	Option	    "ZAxisMapping" "4 5"
>EndSection
>
>Section "Monitor"
>	Identifier   "Monitor0"
>	VendorName   "Monitor Vendor"
>	ModelName    "Monitor Model"
>	HorizSync    30-62
>	VertRefresh  50-60
>	Option       "DPMS"
>EndSection
>
>Section "Device"
>	Identifier  "Card0"
>	Driver      "intel"
>	VendorName  "Intel Corporation"
>	BoardName   "Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller"
>	BusID       "PCI:0:2:0"
>	Option		"FramebufferCompression"	"false"
>	Option		"AccelMethod"	"XAA"
>EndSection
>
>Section "Screen"
>	Identifier "Screen0"
>	Device     "Card0"
>	Monitor    "Monitor0"
>	DefaultDepth 24
>	SubSection "Display"
>		Viewport   0 0
>		Depth     24
>		Modes     "1280x800" "1024x768" "800x600"
>	EndSubSection
>EndSection
>
>#Section "DRI"
>#	Group	"video"
>#	Mode	0660
>#EndSection
>
>Additionally, it is required that you place the following
>configurations in the /etc/rc.conf file
>
> hald_enable="YES"
> dbus_enable="YES"
>
>
>thanks
>Saifi.
>  
>


From saifi.khan at twincling.org  Tue May 19 06:03:02 2009
From: saifi.khan at twincling.org (Saifi Khan)
Date: Tue May 19 06:03:08 2009
Subject: kdb and mouse are disabled on HP Pavilion dv5210us by X.org
 7.4.1 (7.2-R)
In-Reply-To: <4A124990.8070707@gmail.com>
References: <4A104825.8060509@gmail.com>
	<Pine.LNX.4.64.0905182037290.20487@localhost>
	<4A124990.8070707@gmail.com>
Message-ID: <Pine.LNX.4.64.0905191130330.1566@localhost>

On Mon, 18 May 2009, Jin Guojun[VFF] wrote:

> Hi Saifi,
> 
> Xorg 7.4_1 seems having some issues with dbus and hald.
> The --	Option	"AllowEmptyInput" "false" -- is the must, but dbus and hald
> can cause system useless.
> 
> On this laptop, I only run dbus and hald once. Then I disabled both of them
> and X window works well.
> 
> On a couple of Desktop machines (4-core Phenom and Intel P4+506) with GeForce
> graphic cards, without
> dbus and halt, X Window run fine except no F-key works. Enable and run dbus
> and hald, All F-key work,
> but output device is almost dead.
> 
> Top shows system is completely idle, but typing will not show on any xterm
> till the mouse is moving.
> 
> For example, run TOP on a xterm, the entire window system has no thing change.
> The clock of on the upper right
> corner of the "TOP" xterm is stopped (actually is running, but no output to
> display). Once mouse is moving,
> the clock and top section are updated. Once mouse stops moving, then no thing
> is change (no output anywhere).
> 
> Similar to the typing. Typing a command will not show on the Xterm still mouse
> is moved. About less than 5%
> of time, I can type and see the output right way. Without dbus and hald
> running, there is no such problem.
> 
> Has anyone encountered the same problem?
> 
> The other main difference between this xorg.conf and previous on is the
> "Module" section.
> This xorg.conf, generated by X -configure, has -- Load  "dri2" where previous
> one has -- Load  "GLcore". I am not sure if this is an issue.
> 
> -Jin
> 

Hi Jin:

Yes, i've encountered the same symptom on both my servers:
 . Intel P4 + ATI Radeon
 . AMD64X2  + nVidia

So, what i do is move the mouse once and then get to the typing
of code/mail etc.

But once i use rich X based application like browser, krita, it
is very difficult and exasperating to use the app. Currently, i
just switch to my Gentoo laptop to access web browser /
graphics editing.

Thanks for sharing the observation or else this conversation
wouldn't have got started.

thanks
Saifi.
From ejk at iki.fi  Tue May 19 19:30:51 2009
From: ejk at iki.fi (Esa Karkkainen)
Date: Tue May 19 19:30:58 2009
Subject: kdb and mouse are disabled on HP Pavilion dv5210us by X.org
	7.4.1 (7.2-R)
In-Reply-To: <Pine.LNX.4.64.0905191130330.1566@localhost>
References: <4A104825.8060509@gmail.com>
	<Pine.LNX.4.64.0905182037290.20487@localhost>
	<4A124990.8070707@gmail.com>
	<Pine.LNX.4.64.0905191130330.1566@localhost>
Message-ID: <20090519190008.GA2075@pp.htv.fi>

On Tue, May 19, 2009 at 11:35:40AM +0000, Saifi Khan wrote:
> On Mon, 18 May 2009, Jin Guojun[VFF] wrote:
> > Similar to the typing. Typing a command will not show on the Xterm still mouse
> > is moved. About less than 5%
> > of time, I can type and see the output right way. Without dbus and hald
> > running, there is no such problem.
> > 
> > Has anyone encountered the same problem?
> Yes, i've encountered the same symptom on both my servers:
>  . Intel P4 + ATI Radeon
>  . AMD64X2  + nVidia

Me too. I experienced the same when running 7.1-R on ThinkPad W500,
VMWare Workstation 6.5.X for Windows combo.

The X screen update slowness was eliminated when I returned to
"traditional" X config.

-- 
"In the beginning the Universe was created. This has made a lot of
people very angry and been widely regarded as a bad move."
        -- Douglas Adams 1952 - 2001
From patfbsd at davenulle.org  Wed May 20 20:19:40 2009
From: patfbsd at davenulle.org (Patrick =?ISO-8859-15?Q?Lamaizi=E8re?=)
Date: Wed May 20 20:19:47 2009
Subject: SUCCESS: xorg, hal and international keyboard
In-Reply-To: <34088967@bb.ipt.ru>
References: <34088967@bb.ipt.ru>
Message-ID: <20090520220137.177697b8@baby-jane.lamaiziere.net>

Le Fri, 10 Apr 2009 13:10:48 +0400,
Boris Samorodov <bsam@ipt.ru>:

> Hello List,

Hello,

> I didn't find any full information on how to configure hal to use
> international keyboard with new xorg versions. That's my success
> story.
> 
> When hal is used (it's a default for new xorg) the keyboard is
> configured according to
> LOCALBASE/share/hal/fdi/policy/10osvendor/10-x11-input.fdi

IMHO you can use a local configuration file
in /usr/local/etc/hal/fdi/policy instead to patch this file.

Can not try, Xorg+Hal does not work here.

Regards.
From matthew.seaman at thebunker.net  Thu May 21 08:41:58 2009
From: matthew.seaman at thebunker.net (Matthew Seaman)
Date: Thu May 21 08:42:05 2009
Subject: xf86-video-intel-2.7.1 -- a subtly different problem
Message-ID: <4A150FD7.6040008@thebunker.net>


Hi all,

I've been following the recent discussions on this list about the state
of the Intel video driver with interest, since I have a Dell Latitude
D630 laptop with this video card:

vgapci0@pci0:0:2:0:     class=0x030000 card=0x01f91028 chip=0x2a028086
rev=0x0c hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile 965 Express Integrated Graphics Controller'
    class      = display
    subclass   = VGA
vgapci1@pci0:0:2:1:     class=0x038000 card=0x01f91028 chip=0x2a038086
rev=0x0c hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile 965 Express Integrated Graphics Controller'
    class      = display

(--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated
Graphics Controller rev 12, Mem @ 0xf6e00000/1048576,
0xe0000000/268435456, I/O @ 0x0000eff0/8, BIOS @ 0x????????/65536
(--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated
Graphics Controller rev 12, Mem @ 0xf6f00000/1048576
(II) System resource ranges:
        [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
        [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
        [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [3] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
        [4] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]

This is under recent (Thurs 14th) RELENG_7 with all ports up to date.
I'm relying on dbus and hal for detecting the mouse and keyboard, and in
general everything works swimmingly.  It drives my 1920x1200 external
screen via the docking station very happily. But only for about a day
immediately after the system is rebooted.

It seems that if I leave the machine quiescent overnight, so the video
powers itself down, then the following day I get the annoying effect
that certain X events don't seem to be processed and the screen update
blocks until the mouse is moved.  Killing and restarting xdm and the X
server has no effect. Disabling hal and adding the AllowEmptyInput and
AutoAddDevices stuff in xorg.conf ServerOptions section just makes the
effect worse.  Rebooting returns everything to normality for the rest of
the day.

The only errors in Xorg.0.log are occasional sets of 3 lines like this:

(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.

but I get those even when everything is working perfectly well.

Very rarely I have seen the system crash and reboot when I log out of X,
but this might occur perhaps once a month.  I haven't tracked it down
yet but I suspect a bad reaction to some sort of multimedia / flash /
whatever on the web.

	Cheers,

	Matthew

-- 
Dr Matthew Seaman                        The Bunker, Ash Radar Station
PGP: 0x60AE908C on servers               Marshborough Rd
Tel: +44 1304 814890                     Sandwich
Fax: +44 1304 814899                     Kent, CT13 0PL, UK

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 259 bytes
Desc: OpenPGP digital signature
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090521/b844f316/signature.pgp
From rnoland at FreeBSD.org  Thu May 21 15:43:54 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Thu May 21 15:44:01 2009
Subject: xf86-video-intel-2.7.1 -- a subtly different problem
In-Reply-To: <4A150FD7.6040008@thebunker.net>
References: <4A150FD7.6040008@thebunker.net>
Message-ID: <1242920581.1892.3.camel@balrog.2hip.net>

On Thu, 2009-05-21 at 09:24 +0100, Matthew Seaman wrote:
> Hi all,
> 
> I've been following the recent discussions on this list about the state
> of the Intel video driver with interest, since I have a Dell Latitude
> D630 laptop with this video card:
> 
> vgapci0@pci0:0:2:0:     class=0x030000 card=0x01f91028 chip=0x2a028086
> rev=0x0c hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Mobile 965 Express Integrated Graphics Controller'
>     class      = display
>     subclass   = VGA
> vgapci1@pci0:0:2:1:     class=0x038000 card=0x01f91028 chip=0x2a038086
> rev=0x0c hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Mobile 965 Express Integrated Graphics Controller'
>     class      = display
> 
> (--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated
> Graphics Controller rev 12, Mem @ 0xf6e00000/1048576,
> 0xe0000000/268435456, I/O @ 0x0000eff0/8, BIOS @ 0x????????/65536
> (--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated
> Graphics Controller rev 12, Mem @ 0xf6f00000/1048576
> (II) System resource ranges:
>         [0] -1  0       0x000f0000 - 0x000fffff (0x10000) MX[B]
>         [1] -1  0       0x000c0000 - 0x000effff (0x30000) MX[B]
>         [2] -1  0       0x00000000 - 0x0009ffff (0xa0000) MX[B]
>         [3] -1  0       0x0000ffff - 0x0000ffff (0x1) IX[B]
>         [4] -1  0       0x00000000 - 0x000000ff (0x100) IX[B]
> 
> This is under recent (Thurs 14th) RELENG_7 with all ports up to date.
> I'm relying on dbus and hal for detecting the mouse and keyboard, and in
> general everything works swimmingly.  It drives my 1920x1200 external
> screen via the docking station very happily. But only for about a day
> immediately after the system is rebooted.
> 
> It seems that if I leave the machine quiescent overnight, so the video
> powers itself down, then the following day I get the annoying effect
> that certain X events don't seem to be processed and the screen update
> blocks until the mouse is moved.  Killing and restarting xdm and the X
> server has no effect. Disabling hal and adding the AllowEmptyInput and
> AutoAddDevices stuff in xorg.conf ServerOptions section just makes the
> effect worse.  Rebooting returns everything to normality for the rest of
> the day.

So, I think that your issue is that interrupts are vaporizing.  I have a
patch that re-works interrupt handling, but I don't think that it will
apply directly to -STABLE right now and it is currently only safe to use
on Intel.

robert.

> The only errors in Xorg.0.log are occasional sets of 3 lines like this:
> 
> (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
> (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
> (EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
> 
> but I get those even when everything is working perfectly well.
> 
> Very rarely I have seen the system crash and reboot when I log out of X,
> but this might occur perhaps once a month.  I haven't tracked it down
> yet but I suspect a bad reaction to some sort of multimedia / flash /
> whatever on the web.
> 
> 	Cheers,
> 
> 	Matthew

-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090521/f955136f/attachment.pgp
From perryh at pluto.rain.com  Fri May 22 06:49:22 2009
From: perryh at pluto.rain.com (perryh@pluto.rain.com)
Date: Fri May 22 06:49:28 2009
Subject: re-probing DDC/EDID
Message-ID: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>

Is there any way to re-probe the monitor's DDC/EDID while the
X server is running?

I don't expect the server to change the settings it is _using_
without restarting, but would like to get the list of supported
Modelines for a newly-connected monitor -- as would be generated
in the course of "Xorg -configure" -- while the server continues
to run using its old settings.  Of course there would be no need
to re-probe anything but the monitor, since all other hardware
remains the same.

The motivation is to simplify a monitor upgrade from:

* Log out of X session (restarts X).
* Disable xdm in /etc/ttys (shuts down X).
* Xorg -configure.
* Merge the Modelines from the "Xorg -configure" output into
  the existing xorg.conf -- using the text-mode console (or
  restart X with the old settings just to do this merge).
* Re-enable xdm in /etc/ttys (restarts X).
* Log in/start new X session.

to

* Re-probe monitor.
* Merge the new Modelines into xorg.conf.
* Log out / log in (restarts X session using new settings).
From rnoland at FreeBSD.org  Fri May 22 18:00:41 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Fri May 22 18:00:46 2009
Subject: re-probing DDC/EDID
In-Reply-To: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
References: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
Message-ID: <1243015185.63754.104.camel@balrog.2hip.net>

On Thu, 2009-05-21 at 23:38 -0700, perryh@pluto.rain.com wrote:
> Is there any way to re-probe the monitor's DDC/EDID while the
> X server is running?
> 
> I don't expect the server to change the settings it is _using_
> without restarting, but would like to get the list of supported
> Modelines for a newly-connected monitor -- as would be generated
> in the course of "Xorg -configure" -- while the server continues
> to run using its old settings.  Of course there would be no need
> to re-probe anything but the monitor, since all other hardware
> remains the same.
> 
> The motivation is to simplify a monitor upgrade from:
> 
> * Log out of X session (restarts X).
> * Disable xdm in /etc/ttys (shuts down X).
> * Xorg -configure.
> * Merge the Modelines from the "Xorg -configure" output into
>   the existing xorg.conf -- using the text-mode console (or
>   restart X with the old settings just to do this merge).
> * Re-enable xdm in /etc/ttys (restarts X).
> * Log in/start new X session.
> 
> to
> 
> * Re-probe monitor.
> * Merge the new Modelines into xorg.conf.
> * Log out / log in (restarts X session using new settings).

xrandr?

robert.

> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090522/c7b1b118/attachment.pgp
From perryh at pluto.rain.com  Fri May 22 22:24:41 2009
From: perryh at pluto.rain.com (perryh@pluto.rain.com)
Date: Fri May 22 22:24:47 2009
Subject: re-probing DDC/EDID
In-Reply-To: <1243015185.63754.104.camel@balrog.2hip.net>
References: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
	<1243015185.63754.104.camel@balrog.2hip.net>
Message-ID: <4a1724c4.OuQCIyZ462E1cHYx%perryh@pluto.rain.com>

Robert Noland <rnoland@FreeBSD.org> wrote:
> On Thu, 2009-05-21 at 23:38 -0700, perryh@pluto.rain.com wrote:
> > Is there any way to re-probe the monitor's DDC/EDID while the
> > X server is running?
...
> xrandr?

That seems to return the set of resolutions probed at startup
(i.e. those of the old monitor):

$ xrandr -q
   SZ:    Pixels          Physical       Refresh
  *0   1280 x 1024   ( 342mm x 271mm )  *60  
   1   1024 x 768    ( 342mm x 271mm )   60  
   2    800 x 600    ( 342mm x 271mm )   60  
   3    640 x 480    ( 342mm x 271mm )   60  
   4   1280 x 960    ( 342mm x 271mm )   60  
   5   1152 x 864    ( 342mm x 271mm )   75  
   6   1152 x 768    ( 342mm x 271mm )   55  
   7    832 x 624    ( 342mm x 271mm )   75  
   8    700 x 525    ( 342mm x 271mm )   75   60  
   9    640 x 512    ( 342mm x 271mm )   75   60  
   10   576 x 432    ( 342mm x 271mm )   75  
   11   576 x 384    ( 342mm x 271mm )   55  
   12   512 x 384    ( 342mm x 271mm )   75   70   60  
   13   416 x 312    ( 342mm x 271mm )   75  
   14   400 x 300    ( 342mm x 271mm )   75   72   60   56  
   15   320 x 240    ( 342mm x 271mm )   75   73   60  
  Current rotation - normal
  Current reflection - none
  Rotations possible - normal 
  Reflections possible - none

If the list were for the new monitor it would include 1920x1200.

Also, I'm looking for the whole collection of settings to include in
at least the highest-resolution modeline for the new monitor, such
as this entry (which was probed with the old monitor connected -- it
works on the new one, but doesn't utilize the higher resolution that
should now be available):

  Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync

Based on the new monitor's manual, it should support:

  #   resolution  H KHz  V Hz

  1   640 x  350   31.4  70.0
  2   720 x  400   31.4  70.0
  3   640 x  480   31.4  59.9
  4   640 x  480   37.5  75.0
  5   800 x  600   35.1  56.2
  6   800 x  600   37.8  60.3
  7   800 x  600   46.8  75.0
  8   832 x  624   49.7  74.5
  9  1024 x  768   48.3  60.0
 10  1024 x  768   56.4  70.0
 11  1024 x  768   60.0  75.0
 12  1152 x  864   67.5  60.0
 13  1152 x  870   68.6  75.0
 14  1280 x  960   60.0  60.0
 15  1280 x 1024   63.9  60.0
 16  1280 x 1024   79.9  75.0
 17  1440 x  900   55.9  60.0
 18  1680 x 1050   64.7  60.0
 19  1600 x 1200   75.0  60.0
 20  1920 x 1200   74.0  59.9

but that doesn't give me the dot-clock frequencies, the 2nd-4th
horizontal and vertical counts, nor the sync polarities.
From rfalang.bob at gmail.com  Sat May 23 01:34:13 2009
From: rfalang.bob at gmail.com (Bob Falanga)
Date: Sat May 23 01:34:20 2009
Subject: Why is it that KDE4 will not install
Message-ID: <58d1e8d30905221812n7d91022eqf9c69fb4c301bdb8@mail.gmail.com>

This is the end of the console readings involving the install, attached is
the installed packages and the config.log

Thank you for your help,
Bob Falanga


Alternatively, you may set the environment variables LIBDRM_CFLAGS
and LIBDRM_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.

===>  Script "configure" failed unexpectedly.
Please report the problem to x11@FreeBSD.org [maintainer] and attach the
"/usr/ports/graphics/libglut/work/Mesa-7.4/config.log" including the output
of the failure of your make command. Also, it might be a good idea to
provide
an overview of all packages installed on your system (e.g. an `ls
/var/db/pkg`).
*** Error code 1

Stop in /usr/ports/graphics/libglut.
*** Error code 1

Stop in /usr/ports/graphics/gle.
*** Error code 1

Stop in /usr/ports/x11/xscreensaver.
*** Error code 1

Stop in /usr/ports/x11/xscreensaver.
*** Error code 1

Stop in /usr/ports/x11-themes/kdeartwork4.
*** Error code 1

Stop in /usr/ports/x11-themes/kdeartwork4.
*** Error code 1

Stop in /usr/ports/x11/kde4.
*** Error code 1

Stop in /usr/ports/x11/kde4.
[root@bob /usr/ports/x11/kde4]#
From jakub_lach at mailplus.pl  Sat May 23 09:52:53 2009
From: jakub_lach at mailplus.pl (=?UTF-8?Q?Jakub_Lach?=)
Date: Sat May 23 09:53:01 2009
Subject: recent OpenArena/ iquake3 problems 
Message-ID: <27ea150d.5f516301.4a17c103.d5c99@o2.pl>

Hello.

After recent (~16May) mesa/drm update OpenArena 
and ioquake3 are hanging when exiting/changing texture 
quality.

log:

Started tty console (use +set ttycon 0 to disable)
----- CL_Shutdown -----
RE_Shutdown( 1 )
Render thread terminating
Assertion failed: ((run->regs_mask[elm] & (1U << bit)) == 0), function
arena_ru
_reg_dalloc, file /usr/src/lib/libc/stdlib/malloc.c, line 2543.
error: [drm:pid1071:gm45_get_vblank_counter] *ERROR* trying to get vblank
count
for disabled pipe 0 
Dropping master

I'm using FreeBSD 8.0-CURRENT #0  r192601M amd64 
with ports up to date. (xf86-video-intel 2.7.1 @ X4500). 
I'm under impression that support for GM45 is official 
as of FreeBSD 7.2.

After update to xorg-server 1.6 OpenArena and ioquake3 
were missing some textures (OA and Quake III logo in menu 
respectively + models in player settings not showing up), 
but those problems were not major, as they were not
impairing ability to play those games :)

Now after recent updates those problems are not occuring 
anymore, but 

Assertion failed: ((run->regs_mask[elm] & (1U << bit)) == 0), function
arena_ru
_reg_dalloc, file /usr/src/lib/libc/stdlib/malloc.c, line 2543.

is more annoying.


-best regards, 
Jakub Lach


From patfbsd at davenulle.org  Sat May 23 10:19:43 2009
From: patfbsd at davenulle.org (Patrick =?ISO-8859-15?Q?Lamaizi=E8re?=)
Date: Sat May 23 10:19:50 2009
Subject: Libglut does not build (was Why is it that KDE4 will not
 install)
In-Reply-To: <58d1e8d30905221812n7d91022eqf9c69fb4c301bdb8@mail.gmail.com>
References: <58d1e8d30905221812n7d91022eqf9c69fb4c301bdb8@mail.gmail.com>
Message-ID: <20090523120242.478f1521@baby-jane.lamaiziere.net>

Le Fri, 22 May 2009 21:12:52 -0400,
Bob Falanga <rfalang.bob@gmail.com>:

Hello,

> This is the end of the console readings involving the install,
> attached is the installed packages and the config.log

Attached files are lost, could you put them somewhere on the web?
Anyway the problem is not in kde 4 but in libglut:

> Stop in /usr/ports/graphics/libglut.
> *** Error code 1
From rnoland at FreeBSD.org  Sat May 23 14:36:29 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Sat May 23 14:36:42 2009
Subject: re-probing DDC/EDID
In-Reply-To: <4a1724c4.OuQCIyZ462E1cHYx%perryh@pluto.rain.com>
References: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
	<1243015185.63754.104.camel@balrog.2hip.net>
	<4a1724c4.OuQCIyZ462E1cHYx%perryh@pluto.rain.com>
Message-ID: <1243089327.63754.1345.camel@balrog.2hip.net>

On Fri, 2009-05-22 at 15:18 -0700, perryh@pluto.rain.com wrote:
> Robert Noland <rnoland@FreeBSD.org> wrote:
> > On Thu, 2009-05-21 at 23:38 -0700, perryh@pluto.rain.com wrote:
> > > Is there any way to re-probe the monitor's DDC/EDID while the
> > > X server is running?
> ...
> > xrandr?
> 
> That seems to return the set of resolutions probed at startup
> (i.e. those of the old monitor):

what driver are you using?  Radeon or Intel *should* detect a changed
display I think.  You really shouldn't need to set modelines anymore.
Do keep in mind that since the front buffer is created at startup time
and can't currently be re-sized on the fly that you need to set the
virtual screen size to the maximum that you intend to use or that will
be the highest mode used (and displayed by xrandr).  I suspect that is
what is happening here.

robert.

> $ xrandr -q
>    SZ:    Pixels          Physical       Refresh
>   *0   1280 x 1024   ( 342mm x 271mm )  *60  
>    1   1024 x 768    ( 342mm x 271mm )   60  
>    2    800 x 600    ( 342mm x 271mm )   60  
>    3    640 x 480    ( 342mm x 271mm )   60  
>    4   1280 x 960    ( 342mm x 271mm )   60  
>    5   1152 x 864    ( 342mm x 271mm )   75  
>    6   1152 x 768    ( 342mm x 271mm )   55  
>    7    832 x 624    ( 342mm x 271mm )   75  
>    8    700 x 525    ( 342mm x 271mm )   75   60  
>    9    640 x 512    ( 342mm x 271mm )   75   60  
>    10   576 x 432    ( 342mm x 271mm )   75  
>    11   576 x 384    ( 342mm x 271mm )   55  
>    12   512 x 384    ( 342mm x 271mm )   75   70   60  
>    13   416 x 312    ( 342mm x 271mm )   75  
>    14   400 x 300    ( 342mm x 271mm )   75   72   60   56  
>    15   320 x 240    ( 342mm x 271mm )   75   73   60  
>   Current rotation - normal
>   Current reflection - none
>   Rotations possible - normal 
>   Reflections possible - none
> 
> If the list were for the new monitor it would include 1920x1200.
> 
> Also, I'm looking for the whole collection of settings to include in
> at least the highest-resolution modeline for the new monitor, such
> as this entry (which was probed with the old monitor connected -- it
> works on the new one, but doesn't utilize the higher resolution that
> should now be available):
> 
>   Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
> 
> Based on the new monitor's manual, it should support:
> 
>   #   resolution  H KHz  V Hz
> 
>   1   640 x  350   31.4  70.0
>   2   720 x  400   31.4  70.0
>   3   640 x  480   31.4  59.9
>   4   640 x  480   37.5  75.0
>   5   800 x  600   35.1  56.2
>   6   800 x  600   37.8  60.3
>   7   800 x  600   46.8  75.0
>   8   832 x  624   49.7  74.5
>   9  1024 x  768   48.3  60.0
>  10  1024 x  768   56.4  70.0
>  11  1024 x  768   60.0  75.0
>  12  1152 x  864   67.5  60.0
>  13  1152 x  870   68.6  75.0
>  14  1280 x  960   60.0  60.0
>  15  1280 x 1024   63.9  60.0
>  16  1280 x 1024   79.9  75.0
>  17  1440 x  900   55.9  60.0
>  18  1680 x 1050   64.7  60.0
>  19  1600 x 1200   75.0  60.0
>  20  1920 x 1200   74.0  59.9
> 
> but that doesn't give me the dot-clock frequencies, the 2nd-4th
> horizontal and vertical counts, nor the sync polarities.
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090523/a55edb80/attachment.pgp
From rnoland at FreeBSD.org  Sat May 23 14:49:13 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Sat May 23 14:49:20 2009
Subject: recent OpenArena/ iquake3 problems
In-Reply-To: <27ea150d.5f516301.4a17c103.d5c99@o2.pl>
References: <27ea150d.5f516301.4a17c103.d5c99@o2.pl>
Message-ID: <1243090097.63754.1369.camel@balrog.2hip.net>

On Sat, 2009-05-23 at 11:25 +0200, Jakub Lach wrote:
> Hello.
> 
> After recent (~16May) mesa/drm update OpenArena 
> and ioquake3 are hanging when exiting/changing texture 
> quality.

I think this is a known issue in mesa 7.4.2.  See
http://bugs.freedesktop.org/show_bug.cgi?id=21756 I am expecting a 7.4.3
or 7.5 release very shortly.

robert.

> log:
> 
> Started tty console (use +set ttycon 0 to disable)
> ----- CL_Shutdown -----
> RE_Shutdown( 1 )
> Render thread terminating
> Assertion failed: ((run->regs_mask[elm] & (1U << bit)) == 0), function
> arena_ru
> _reg_dalloc, file /usr/src/lib/libc/stdlib/malloc.c, line 2543.
> error: [drm:pid1071:gm45_get_vblank_counter] *ERROR* trying to get vblank
> count
> for disabled pipe 0 
> Dropping master
> 
> I'm using FreeBSD 8.0-CURRENT #0  r192601M amd64 
> with ports up to date. (xf86-video-intel 2.7.1 @ X4500). 
> I'm under impression that support for GM45 is official 
> as of FreeBSD 7.2.
> 
> After update to xorg-server 1.6 OpenArena and ioquake3 
> were missing some textures (OA and Quake III logo in menu 
> respectively + models in player settings not showing up), 
> but those problems were not major, as they were not
> impairing ability to play those games :)
> 
> Now after recent updates those problems are not occuring 
> anymore, but 
> 
> Assertion failed: ((run->regs_mask[elm] & (1U << bit)) == 0), function
> arena_ru
> _reg_dalloc, file /usr/src/lib/libc/stdlib/malloc.c, line 2543.
> 
> is more annoying.
> 
> 
> -best regards, 
> Jakub Lach
> 
> 
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090523/3a7bc190/attachment.pgp
From rbgarga at gmail.com  Sat May 23 18:20:45 2009
From: rbgarga at gmail.com (Renato Botelho)
Date: Sat May 23 18:20:52 2009
Subject: SUCCESS: xorg, hal and international keyboard
In-Reply-To: <34088967@bb.ipt.ru>
References: <34088967@bb.ipt.ru>
Message-ID: <747dc8f30905231049t1f5047d9h966e5ebd31af5cf@mail.gmail.com>

On Fri, Apr 10, 2009 at 6:10 AM, Boris Samorodov <bsam@ipt.ru> wrote:
> Hello List,
>
>
> I didn't find any full information on how to configure hal to use
> international keyboard with new xorg versions. That's my success
> story.
>
> When hal is used (it's a default for new xorg) the keyboard is
> configured according to
> LOCALBASE/share/hal/fdi/policy/10osvendor/10-x11-input.fdi
> My previous xorg.conf has defined keyboard as:
> -----
> Section "InputDevice"
> ? ? ? ?Identifier ?"Keyboard0"
> ? ? ? ?Driver ? ? ?"kbd"
> ? ? ? ?Option ? ? ?"XkbModel" "pc105"
> ? ? ? ?Option ? ? ?"XkbLayout" "us,ru(winkeys)"
> ? ? ? ?Option ? ? ?"XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll,altwin:menu"
> EndSection
> -----
>
> The last two options should be moved to 10-x11-input.fdi. Beware
> that Option "XkbLayout" "us,ru(winkeys)" is equal to
> -----
> Option ? ? ?"XkbLayout" "us,ru"
> Option ? ? ?"XkbVariant" ",winkeys"
> -----
>
> One more change should be done at 10-x11-input.fdi: a match key
> for "linux" should be changed to "FreeBSD". ;-)
>
> So, for my keyboard the diff is (well, I've changed a comment
> also):
> -----
> --- 10-x11-input.fdi.orig ? ? ? 2009-04-10 10:35:51.000000000 +0400
> +++ 10-x11-input.fdi ? ?2009-04-10 13:06:49.000000000 +0400
> @@ -2,12 +2,13 @@
> ?<deviceinfo version="0.2">
> ? <device>
> ? ? <match key="info.capabilities" contains="input.keyboard">
> - ? ? ?<!-- If we're using Linux, we use evdev by default (falling back to
> - ? ? ? ? ? keyboard otherwise). -->
> + ? ? ?<!-- If we're using FreeBSD, we use kbd by default -->
> ? ? ? <merge key="input.x11_driver" type="string">kbd</merge>
> ? ? ? <match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
> - ? ? ? ? ? ? string="Linux">
> - ? ? ? ?<merge key="input.x11_driver" type="string">evdev</merge>
> + ? ? ? ? ? ? string="FreeBSD">
> + ? ? ?<merge key="input.xkb.layout" type="string">us,ru</merge>
> + ? ? ?<merge key="input.xkb.variant" type="string">,winkeys</merge>
> + ? ? ?<merge key="input.xkb.options" type="string">grp:ctrl_shift_toggle,grp_led:scroll,altwin:menu</merge>
> ? ? ? </match>
> ? ? </match>
> ? </device>
> -----
>
> If nothing helps you may wish to restart hald. ;-)
>
>
> HTH & WBR
> --
> Boris Samorodov (bsam)
> Research Engineer, http://www.ipt.ru Telephone & Internet SP
> FreeBSD Committer, http://www.FreeBSD.org The Power To Serve
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
>

Hello Boris,

You don't need to patch this file, just create your own one
and save it as /usr/local/etc/hal/fdi/policy/keyboard.fdi and
restar hal.

Here is my example, not international, but a Sun Type 7

garga@botelhor:~> cat /usr/local/etc/hal/fdi/policy/keyboard.fdi
<?xml version="1.0" encoding="UTF-8"?>
<deviceinfo version="0.2">
        <device>
                <match key="info.capabilities" contains="input.keyboard">
                <match key="info.product" contains="Type 7 USB keyboard">
                        <merge key="input.x11_driver" type="string">kbd</merge>
                        <merge key="input.x11_options.XkbLayout"
type="string">pc(pc105)+sun_vndr/usb(sun_usb)+pc(pc105)+us(intl)</merge>
                </match>
                </match>
        </device>
</deviceinfo>

-- 
Renato Botelho
From andriy at irbisnet.com  Sat May 23 21:42:49 2009
From: andriy at irbisnet.com (Andriy Bakay)
Date: Sat May 23 21:42:54 2009
Subject: Nouveau kernel module
Message-ID: <4A186796.6030201@irbisnet.com>

Hi X11 Team,

Could you, please, provide the link (or any related information), where 
I can get kernel module 'nouveau.ko' for FreeBSD 7.x amd64?

Thanks,
Andriy
From ivoras at freebsd.org  Sun May 24 01:01:22 2009
From: ivoras at freebsd.org (Ivan Voras)
Date: Sun May 24 01:01:28 2009
Subject: Radeon performance and AIGLX problem
Message-ID: <gva68l$lse$1@ger.gmane.org>

Hi,

I'm trying to configure a desktop with Radeon 3650, RV635 chip.

Using both the radeon and the radeonhd driver I see slow drawing, 
occasional display corruption when moving windows, an unsettling
"reset" of the whole screen when a video is played.

Enabling AIGLX with "radeonhd" makes X.Org freeze with a blank screen 
(ctrl-backspace doesn't work but system responds to network and 
crtl-alt-del) on start, and the following message in X.Org with the 
"radeon" driver:

(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:07:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:07:00.0
(EE) AIGLX error: Calling driver entry point failed(EE) AIGLX: reverting 
to software rendering
(II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0

glxinfo then shows:

name of display: :0.0
display: :0  screen: 0
direct rendering: Yes

and OpenGL is always software rendered.

My entire xorg.conf is:

----
Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    Option       "AIGLX" "On"
EndSection

Section "Device"
     Identifier     "Device0"
     Driver         "radeon"
     VendorName     "AMDATI"
     BoardName      "RadeonHD"
     Option      "DRI"           "on"
#    Option     "AccelMethod"   "exa"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
EndSection

Section "Extensions"
         Option  "Composite"     "On"
EndSection

Section "Module"
         Load    "bitmap"
         Load    "ddc"
         Load    "extmod"
         Load    "freetype"

         Load    "dri"
         Load    "glx"
         Load    "dbe"
EndSection
----


Any suggestions?

From npapke at acm.org  Sun May 24 03:35:09 2009
From: npapke at acm.org (Norbert Papke)
Date: Sun May 24 03:35:17 2009
Subject: Radeon performance and AIGLX problem
In-Reply-To: <gva68l$lse$1@ger.gmane.org>
References: <gva68l$lse$1@ger.gmane.org>
Message-ID: <200905232035.07912.npapke@acm.org>

On May 23, 2009, Ivan Voras wrote:
> Hi,
>
> I'm trying to configure a desktop with Radeon 3650, RV635 chip.
>
> Using both the radeon and the radeonhd driver I see slow drawing,
> occasional display corruption when moving windows, an unsettling
> "reset" of the whole screen when a video is played.

I am using a card with a 3650 part.  For me, the xf86-video-radeonhd-devel 
driver works well for 2D acceleration.  My device section:

Section "Device"
        Identifier      "Card0"
        Driver          "radeonhd"
        VendorName      "ATI"
        BoardName       "ASUS 3650 HD"
        Option          "AccelMethod"   "exa"
        Option          "DRI"           "on"
        Option          "ForceLowPowerMode" "on"
EndSection


> Enabling AIGLX with "radeonhd" makes X.Org freeze with a blank screen
> (ctrl-backspace doesn't work but system responds to network and
> crtl-alt-del) on start, and the following message in X.Org with the
> "radeon" driver:

There is no 3D acceleration available for this card yet.  I suggest you turn 
off AIGLX.  To make ctrl-alt-backspace work, you need 

        Option          "DontZap" "false"

in your ServerFlags section.

Cheers,

-- Norbert Papke.
   npapke@acm.org
From rnoland at FreeBSD.org  Sun May 24 14:27:48 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Sun May 24 14:27:54 2009
Subject: Radeon performance and AIGLX problem
In-Reply-To: <gva68l$lse$1@ger.gmane.org>
References: <gva68l$lse$1@ger.gmane.org>
Message-ID: <1243175212.63754.2801.camel@balrog.2hip.net>

On Sun, 2009-05-24 at 03:01 +0200, Ivan Voras wrote:
> Hi,
> 
> I'm trying to configure a desktop with Radeon 3650, RV635 chip.
> 
> Using both the radeon and the radeonhd driver I see slow drawing, 
> occasional display corruption when moving windows, an unsettling
> "reset" of the whole screen when a video is played.

This we may need to look at... You are using EXA right?

> Enabling AIGLX with "radeonhd" makes X.Org freeze with a blank screen 
> (ctrl-backspace doesn't work but system responds to network and 
> crtl-alt-del) on start, and the following message in X.Org with the 
> "radeon" driver:
> 
> (II) AIGLX: Screen 0 is not DRI2 capable
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:07:00.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: drmOpenMinor returns 11
> drmOpenByBusid: drmGetBusid reports pci:0000:07:00.0
> (EE) AIGLX error: Calling driver entry point failed(EE) AIGLX: reverting 
> to software rendering
> (II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so
> (II) GLX: Initialized DRISWRAST GL provider for screen 0

There is no hardware support for 3d on this chip yet.  (Well, I've been
working with early code, but it isn't ready to release yet.)

> glxinfo then shows:
> 
> name of display: :0.0
> display: :0  screen: 0
> direct rendering: Yes

Yes, this is odd, but correct... You have a "direct rendered" software
driver (swrast).

> and OpenGL is always software rendered.
> 
> My entire xorg.conf is:
> 
> ----
> Section "ServerLayout"
>     Identifier     "Layout0"
>     Screen      0  "Screen0" 0 0
>     Option       "AIGLX" "On"
> EndSection
> 
> Section "Device"
>      Identifier     "Device0"
>      Driver         "radeon"
>      VendorName     "AMDATI"
>      BoardName      "RadeonHD"
>      Option      "DRI"           "on"
> #    Option     "AccelMethod"   "exa"

Trying to use XAA on these chips is doomed to failure.

robert.

> EndSection
> 
> Section "Screen"
>     Identifier     "Screen0"
>     Device         "Device0"
> EndSection
> 
> Section "Extensions"
>          Option  "Composite"     "On"
> EndSection
> 
> Section "Module"
>          Load    "bitmap"
>          Load    "ddc"
>          Load    "extmod"
>          Load    "freetype"
> 
>          Load    "dri"
>          Load    "glx"
>          Load    "dbe"
> EndSection
> ----
> 
> 
> Any suggestions?
> 
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090524/2dc27317/attachment.pgp
From bsam at ipt.ru  Sun May 24 15:02:01 2009
From: bsam at ipt.ru (Boris Samorodov)
Date: Sun May 24 15:02:08 2009
Subject: SUCCESS: xorg, hal and international keyboard
In-Reply-To: <20090520220137.177697b8@baby-jane.lamaiziere.net> ("Patrick
	=?utf-8?Q?Lamaizi=C3=A8re=22's?= message of "Wed\,
	20 May 2009 22\:01\:37 +0200")
References: <34088967@bb.ipt.ru>
	<20090520220137.177697b8@baby-jane.lamaiziere.net>
Message-ID: <78143248@ipt.ru>

Patrick Lamaizi?re <patfbsd@davenulle.org> writes:
> Le Fri, 10 Apr 2009 13:10:48 +0400,
> Boris Samorodov <bsam@ipt.ru>:
>
>> I didn't find any full information on how to configure hal to use
>> international keyboard with new xorg versions. That's my success
>> story.
>> 
>> When hal is used (it's a default for new xorg) the keyboard is
>> configured according to
>> LOCALBASE/share/hal/fdi/policy/10osvendor/10-x11-input.fdi
>
> IMHO you can use a local configuration file
> in /usr/local/etc/hal/fdi/policy instead to patch this file.
>
> Can not try, Xorg+Hal does not work here.

Confirmed, it works. Thanks!


WBR
-- 
bsam
From bsam at ipt.ru  Sun May 24 15:03:49 2009
From: bsam at ipt.ru (Boris Samorodov)
Date: Sun May 24 15:04:05 2009
Subject: SUCCESS: xorg, hal and international keyboard
In-Reply-To: <747dc8f30905231049t1f5047d9h966e5ebd31af5cf@mail.gmail.com>
	(Renato Botelho's message of "Sat\, 23 May 2009 14\:49\:57 -0300")
References: <34088967@bb.ipt.ru>
	<747dc8f30905231049t1f5047d9h966e5ebd31af5cf@mail.gmail.com>
Message-ID: <12063144@ipt.ru>

Renato Botelho <rbgarga@gmail.com> writes:
> On Fri, Apr 10, 2009 at 6:10 AM, Boris Samorodov <bsam@ipt.ru> wrote:
>>
>> I didn't find any full information on how to configure hal to use
>> international keyboard with new xorg versions. That's my success
>> story.
>>
>> When hal is used (it's a default for new xorg) the keyboard is
>> configured according to
>> LOCALBASE/share/hal/fdi/policy/10osvendor/10-x11-input.fdi
>> My previous xorg.conf has defined keyboard as:
>> -----
>> Section "InputDevice"
>> ? ? ? ?Identifier ?"Keyboard0"
>> ? ? ? ?Driver ? ? ?"kbd"
>> ? ? ? ?Option ? ? ?"XkbModel" "pc105"
>> ? ? ? ?Option ? ? ?"XkbLayout" "us,ru(winkeys)"
>> ? ? ? ?Option ? ? ?"XkbOptions" "grp:ctrl_shift_toggle,grp_led:scroll,altwin:menu"
>> EndSection
>> -----
>>
>> The last two options should be moved to 10-x11-input.fdi. Beware
>> that Option "XkbLayout" "us,ru(winkeys)" is equal to
>> -----
>> Option ? ? ?"XkbLayout" "us,ru"
>> Option ? ? ?"XkbVariant" ",winkeys"
>> -----
>>
>> One more change should be done at 10-x11-input.fdi: a match key
>> for "linux" should be changed to "FreeBSD". ;-)
>>
>> So, for my keyboard the diff is (well, I've changed a comment
>> also):
>> -----
>> --- 10-x11-input.fdi.orig ? ? ? 2009-04-10 10:35:51.000000000 +0400
>> +++ 10-x11-input.fdi ? ?2009-04-10 13:06:49.000000000 +0400
>> @@ -2,12 +2,13 @@
>> ?<deviceinfo version="0.2">
>> ? <device>
>> ? ? <match key="info.capabilities" contains="input.keyboard">
>> - ? ? ?<!-- If we're using Linux, we use evdev by default (falling back to
>> - ? ? ? ? ? keyboard otherwise). -->
>> + ? ? ?<!-- If we're using FreeBSD, we use kbd by default -->
>> ? ? ? <merge key="input.x11_driver" type="string">kbd</merge>
>> ? ? ? <match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
>> - ? ? ? ? ? ? string="Linux">
>> - ? ? ? ?<merge key="input.x11_driver" type="string">evdev</merge>
>> + ? ? ? ? ? ? string="FreeBSD">
>> + ? ? ?<merge key="input.xkb.layout" type="string">us,ru</merge>
>> + ? ? ?<merge key="input.xkb.variant" type="string">,winkeys</merge>
>> + ? ? ?<merge key="input.xkb.options" type="string">grp:ctrl_shift_toggle,grp_led:scroll,altwin:menu</merge>
>> ? ? ? </match>
>> ? ? </match>
>> ? </device>
>> -----
>>
>> If nothing helps you may wish to restart hald. ;-)

> Hello Boris,
>
> You don't need to patch this file, just create your own one
> and save it as /usr/local/etc/hal/fdi/policy/keyboard.fdi and
> restar hal.
>
> Here is my example, not international, but a Sun Type 7
>
> garga@botelhor:~> cat /usr/local/etc/hal/fdi/policy/keyboard.fdi
> <?xml version="1.0" encoding="UTF-8"?>
> <deviceinfo version="0.2">
>         <device>
>                 <match key="info.capabilities" contains="input.keyboard">
>                 <match key="info.product" contains="Type 7 USB keyboard">
>                         <merge key="input.x11_driver" type="string">kbd</merge>
>                         <merge key="input.x11_options.XkbLayout"
> type="string">pc(pc105)+sun_vndr/usb(sun_usb)+pc(pc105)+us(intl)</merge>
>                 </match>
>                 </match>
>         </device>
> </deviceinfo>

Yes, this works just fine and is a better solution. Thanks!


WBR
-- 
bsa
From perryh at pluto.rain.com  Mon May 25 05:12:57 2009
From: perryh at pluto.rain.com (perryh@pluto.rain.com)
Date: Mon May 25 05:13:04 2009
Subject: re-probing DDC/EDID
In-Reply-To: <1243089327.63754.1345.camel@balrog.2hip.net>
References: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
	<1243015185.63754.104.camel@balrog.2hip.net>
	<4a1724c4.OuQCIyZ462E1cHYx%perryh@pluto.rain.com>
	<1243089327.63754.1345.camel@balrog.2hip.net>
Message-ID: <4a1a288f.Z0ZX9ngtqKNukKbL%perryh@pluto.rain.com>

Robert Noland <rnoland@FreeBSD.org> wrote:
> On Fri, 2009-05-22 at 15:18 -0700, perryh@pluto.rain.com wrote:
> > Robert Noland <rnoland@FreeBSD.org> wrote:
> > > On Thu, 2009-05-21 at 23:38 -0700, perryh@pluto.rain.com wrote:
> > > > Is there any way to re-probe the monitor's DDC/EDID while the
> > > > X server is running?
> > ...
> > > xrandr?
> >
> > That seems to return the set of resolutions probed at startup
> > (i.e. those of the old monitor):
>
> what driver are you using?

ATI, I think.  I'll append xorg.conf (with comments deleted,
to reduce its size a bit).

> Radeon or Intel *should* detect a changed display I think.
> You really shouldn't need to set modelines anymore.

When setting up the previous monitor -- and the one before that --
it seemed necessary to remove unusable modelines from xorg.conf,
else CtrlAlt+ and CtrlAlt- would set modes that produced a messed-
up display or a blank screen.  (The monitors' DDC reports -- or
-configure's interpretation of them -- apparently included modes
that would not actually work.)

> Do keep in mind that since the front buffer is created at startup
> time and can't currently be re-sized on the fly that you need to
> set the virtual screen size to the maximum that you intend to use
> or that will be the highest mode used (and displayed by xrandr).

I had expected something along those lines, which is why I didn't
expect to be able to _use_ 1920x1200 without restarting, but I'd
still expect to be able to rerun the probe of the monitor and get
the new report -- including the modelines that would have been
generated if I had been running that probe "for real".

============================ xorg.conf ============================

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/X11R6/lib/X11/rgb"
	ModulePath   "/usr/X11R6/lib/modules"
	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
	FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
	FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
	Load  "dbe"
	Load  "dri"
	Load  "extmod"
	Load  "glx"
	Load  "record"
	Load  "xtrap"
	Load  "freetype"
	Load  "type1"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/psm0"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "BTC"
	ModelName    "LM-1702"
	Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
	Modeline "1024x768"    65.00  1024 1048 1184 1344   768  771  777  806 -hsync -vsync
	Modeline  "800x600"    40.00   800  840  968 1056   600  601  605  628 +hsync +vsync
	Modeline  "640x480"    25.20   640  656  752  800   480  490  492  525 -hsync -vsync
	Option	    "DPMS"
EndSection

Section "Device"
	Identifier  "Card0"
	Driver      "ati"
	VendorName  "ATI"
	BoardName   "3D Rage Pro AGP 1X/2X"
	ChipSet     "ati"
	ChipId      0x4742
	ChipRev     0x5c
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
		Modes "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
		Modes "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
		Modes "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
		Modes "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection
From hill at hotbox.ru  Mon May 25 09:05:35 2009
From: hill at hotbox.ru (Basil Hill)
Date: Mon May 25 09:05:43 2009
Subject: report the problem
Message-ID: <12432353925411.80612108.hill@hotbox.ru>

Please report the problem to x11@FreeBSD.org [maintainer] and attach the
"/usr/ports/x11/libXrandr/work/libXrandr-1.3.0/config.log" including the
output of the failure of your make command. Also, it might be a good idea to
provide an overview of all packages installed on your system (e.g. an `ls
/var/db/pkg`).

Br,
Vasiliy




-------------- next part --------------
A non-text attachment was scrubbed...
Name: ls_pkg
Type: application/octet-stream
Size: 907 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090525/0d0c63e5/ls_pkg.obj
From bugmaster at FreeBSD.org  Mon May 25 11:07:06 2009
From: bugmaster at FreeBSD.org (FreeBSD bugmaster)
Date: Mon May 25 11:10:35 2009
Subject: Current problem reports assigned to freebsd-x11@FreeBSD.org
Message-ID: <200905251107.n4PB73re093014@freefall.freebsd.org>

Note: to view an individual PR, use:
  http://www.freebsd.org/cgi/query-pr.cgi?pr=(number).

The following is a listing of current problems submitted by FreeBSD users.
These represent problem reports covering all versions including
experimental development code and obsolete releases.


S Tracker      Resp.      Description
--------------------------------------------------------------------------------
o ports/134643 x11        [patch] x11-servers/xorg-server - Unbreak Xorg 7.4 ser
o ports/134244 x11        x11/xorg: "intel" driver for Xorg is very broken
o ports/134194 x11        graphics/dri fail on 7.2-RELEASE amd64
o ports/134132 x11        x11-servers/xorg-server: Intel i845 - xorg.conf with U
o ports/134082 x11        x11/xdriinfo: xdriinfo-1.0.2 build fail
o ports/133946 x11        x11-servers/xorg-server [patch] X crashes in xinerama 
o ports/133609 x11        x11/xorg crashes with vlc, intel video driver
o ports/133482 x11        x11/libXext "Generic Event Extension not available" er
o ports/133465 x11        x11/xorg: X crashes with mplayer -vo xv with xf86-vide
o ports/133419 x11        Unable to build x11-drivers/xf86-video-nsc
o ports/133175 x11        [patch] x11/pixman: enable SSE2 support autodetection
o ports/132621 x11        x11/xorg tries to install event when deselected
o ports/132403 x11        x11/xorg with Radeon X600 (R370): cannot re-initialize
o ports/132100 x11        x11/xorg: Xorg server forgets pointer map after xlock
o ports/132041 x11        x11/xorg: Broken Intel video driver
o ports/131930 x11        [PATCH] x11-servers/xorg-server coredumps on exit
o ports/131726 x11        x11-servers/xorg-server: xorg server messes with my eh
o ports/131696 x11        x11-servers/xorg-server: hald core dumps make X11 unus
o ports/131016 x11        x11/xorg - xorg-7.4 renders system unusable!
f ports/126812 x11        x11-drivers/xf86-video-ati - System freeze when exitin
o ports/125883 x11        x11-fonts/xorg-fonts-cyrillic is installed, but fonts 
f ports/123137 x11        x11/libX11: missing ru_RU.UTF-8 locale
o ports/122830 x11        x11/xorg: Error in I830WaitLpRing()
s ports/117907 x11        x11-servers/mga_hal broken on 7.0-BETA (GLIBC error)
o ports/116443 x11        x11-drivers/xf86-input-keyboard patch for USB jp106 ke

25 problems total.

From rnoland at FreeBSD.org  Mon May 25 13:52:41 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Mon May 25 13:53:12 2009
Subject: re-probing DDC/EDID
In-Reply-To: <4a1a288f.Z0ZX9ngtqKNukKbL%perryh@pluto.rain.com>
References: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
	<1243015185.63754.104.camel@balrog.2hip.net>
	<4a1724c4.OuQCIyZ462E1cHYx%perryh@pluto.rain.com>
	<1243089327.63754.1345.camel@balrog.2hip.net>
	<4a1a288f.Z0ZX9ngtqKNukKbL%perryh@pluto.rain.com>
Message-ID: <1243259500.1787.986.camel@balrog.2hip.net>

On Sun, 2009-05-24 at 22:11 -0700, perryh@pluto.rain.com wrote:
> Robert Noland <rnoland@FreeBSD.org> wrote:
> > On Fri, 2009-05-22 at 15:18 -0700, perryh@pluto.rain.com wrote:
> > > Robert Noland <rnoland@FreeBSD.org> wrote:
> > > > On Thu, 2009-05-21 at 23:38 -0700, perryh@pluto.rain.com wrote:
> > > > > Is there any way to re-probe the monitor's DDC/EDID while the
> > > > > X server is running?
> > > ...
> > > > xrandr?
> > >
> > > That seems to return the set of resolutions probed at startup
> > > (i.e. those of the old monitor):
> >
> > what driver are you using?
> 
> ATI, I think.  I'll append xorg.conf (with comments deleted,
> to reduce its size a bit).
> 
> > Radeon or Intel *should* detect a changed display I think.
> > You really shouldn't need to set modelines anymore.
> 
> When setting up the previous monitor -- and the one before that --
> it seemed necessary to remove unusable modelines from xorg.conf,
> else CtrlAlt+ and CtrlAlt- would set modes that produced a messed-
> up display or a blank screen.  (The monitors' DDC reports -- or
> -configure's interpretation of them -- apparently included modes
> that would not actually work.)
> 
> > Do keep in mind that since the front buffer is created at startup
> > time and can't currently be re-sized on the fly that you need to
> > set the virtual screen size to the maximum that you intend to use
> > or that will be the highest mode used (and displayed by xrandr).
> 
> I had expected something along those lines, which is why I didn't
> expect to be able to _use_ 1920x1200 without restarting, but I'd
> still expect to be able to rerun the probe of the monitor and get
> the new report -- including the modelines that would have been
> generated if I had been running that probe "for real".

Ok, I still think that you are going about this the wrong way in a randr
based world...  If you look at your xorg log, you should see the modes
that are probed and calculated for the display.  I think that you should
remove all the modelines from the Monitor section.  The Modes listed in
the screen section I think is ok, but I'm not sure how useful it really
is.  If you add a Virtual 1920 1200 line to the Display section, then
your initial front buffer will be sized large enough to use the new
mode.  (You are probably only using Depth 24)  See man xorg.conf.

If randr is producing invalid modes, then either the display is quirky
and not giving the right data to the ddx driver or it's a bug that needs
to be looked at upstream.

robert.

> 
> ============================ xorg.conf ============================
> 
> Section "ServerLayout"
> 	Identifier     "X.org Configured"
> 	Screen      0  "Screen0" 0 0
> 	InputDevice    "Mouse0" "CorePointer"
> 	InputDevice    "Keyboard0" "CoreKeyboard"
> EndSection
> 
> Section "Files"
> 	RgbPath      "/usr/X11R6/lib/X11/rgb"
> 	ModulePath   "/usr/X11R6/lib/modules"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
> 	FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
> EndSection
> 
> Section "Module"
> 	Load  "dbe"
> 	Load  "dri"
> 	Load  "extmod"
> 	Load  "glx"
> 	Load  "record"
> 	Load  "xtrap"
> 	Load  "freetype"
> 	Load  "type1"
> EndSection
> 
> Section "InputDevice"
> 	Identifier  "Keyboard0"
> 	Driver      "kbd"
> EndSection
> 
> Section "InputDevice"
> 	Identifier  "Mouse0"
> 	Driver      "mouse"
> 	Option	    "Protocol" "auto"
> 	Option	    "Device" "/dev/psm0"
> 	Option	    "ZAxisMapping" "4 5 6 7"
> EndSection
> 
> Section "Monitor"
> 	Identifier   "Monitor0"
> 	VendorName   "BTC"
> 	ModelName    "LM-1702"
> 	Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync
> 	Modeline "1024x768"    65.00  1024 1048 1184 1344   768  771  777  806 -hsync -vsync
> 	Modeline  "800x600"    40.00   800  840  968 1056   600  601  605  628 +hsync +vsync
> 	Modeline  "640x480"    25.20   640  656  752  800   480  490  492  525 -hsync -vsync
> 	Option	    "DPMS"
> EndSection
> 
> Section "Device"
> 	Identifier  "Card0"
> 	Driver      "ati"
> 	VendorName  "ATI"
> 	BoardName   "3D Rage Pro AGP 1X/2X"
> 	ChipSet     "ati"
> 	ChipId      0x4742
> 	ChipRev     0x5c
> 	BusID       "PCI:1:0:0"
> EndSection
> 
> Section "Screen"
> 	Identifier "Screen0"
> 	Device     "Card0"
> 	Monitor    "Monitor0"
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     1
> 		Modes "1280x1024" "1024x768" "800x600" "640x480"
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     4
> 		Modes "1280x1024" "1024x768" "800x600" "640x480"
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     8
> 		Modes "1280x1024" "1024x768" "800x600" "640x480"
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     15
> 		Modes "1280x1024" "1024x768" "800x600" "640x480"
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     16
> 		Modes "1280x1024" "1024x768" "800x600" "640x480"
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     24
> 		Modes "1280x1024" "1024x768" "800x600" "640x480"
> 	EndSubSection
> EndSection
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090525/dc98d0dc/attachment.pgp
From perryh at pluto.rain.com  Mon May 25 21:13:27 2009
From: perryh at pluto.rain.com (perryh@pluto.rain.com)
Date: Mon May 25 21:14:48 2009
Subject: re-probing DDC/EDID
In-Reply-To: <1243259500.1787.986.camel@balrog.2hip.net>
References: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
	<1243015185.63754.104.camel@balrog.2hip.net>
	<4a1724c4.OuQCIyZ462E1cHYx%perryh@pluto.rain.com>
	<1243089327.63754.1345.camel@balrog.2hip.net>
	<4a1a288f.Z0ZX9ngtqKNukKbL%perryh@pluto.rain.com>
	<1243259500.1787.986.camel@balrog.2hip.net>
Message-ID: <4a1b09b3.ewnqp2rizVfsYpk5%perryh@pluto.rain.com>

Robert Noland <rnoland@FreeBSD.org!rnoland@agora.rdrop.com> wrote:

> If you look at your xorg log, you should see the modes
> that are probed and calculated for the display.

Indeed, but only during startup AFAIK.  What I am looking for is a
way to repeat the probing and calculation, _without_ restarting X.
And yes, I recognize that -- since X is not being restarted -- such
an operation will not affect what is being displayed:  it will only
produce a report.

The question is, is this possible?
From rnoland at FreeBSD.org  Mon May 25 23:18:16 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Mon May 25 23:18:34 2009
Subject: re-probing DDC/EDID
In-Reply-To: <4a1b09b3.ewnqp2rizVfsYpk5%perryh@pluto.rain.com>
References: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
	<1243015185.63754.104.camel@balrog.2hip.net>
	<4a1724c4.OuQCIyZ462E1cHYx%perryh@pluto.rain.com>
	<1243089327.63754.1345.camel@balrog.2hip.net>
	<4a1a288f.Z0ZX9ngtqKNukKbL%perryh@pluto.rain.com>
	<1243259500.1787.986.camel@balrog.2hip.net>
	<4a1b09b3.ewnqp2rizVfsYpk5%perryh@pluto.rain.com>
Message-ID: <1243293431.1704.387.camel@balrog.2hip.net>

On Mon, 2009-05-25 at 14:12 -0700, perryh@pluto.rain.com wrote:
> Robert Noland <rnoland@FreeBSD.org!rnoland@agora.rdrop.com> wrote:
> 
> > If you look at your xorg log, you should see the modes
> > that are probed and calculated for the display.
> 
> Indeed, but only during startup AFAIK.  What I am looking for is a
> way to repeat the probing and calculation, _without_ restarting X.
> And yes, I recognize that -- since X is not being restarted -- such
> an operation will not affect what is being displayed:  it will only
> produce a report.
> 
> The question is, is this possible?

I am fairly certain that this happens when you do an "xrandr -q"  Have
you actually tried any of the things that I've suggested?

robert.

-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090525/d2caf713/attachment.pgp
From perryh at pluto.rain.com  Tue May 26 09:11:25 2009
From: perryh at pluto.rain.com (perryh@pluto.rain.com)
Date: Tue May 26 09:11:32 2009
Subject: re-probing DDC/EDID
In-Reply-To: <1243293431.1704.387.camel@balrog.2hip.net>
References: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
	<1243015185.63754.104.camel@balrog.2hip.net>
	<4a1724c4.OuQCIyZ462E1cHYx%perryh@pluto.rain.com>
	<1243089327.63754.1345.camel@balrog.2hip.net>
	<4a1a288f.Z0ZX9ngtqKNukKbL%perryh@pluto.rain.com>
	<1243259500.1787.986.camel@balrog.2hip.net>
	<4a1b09b3.ewnqp2rizVfsYpk5%perryh@pluto.rain.com>
	<1243293431.1704.387.camel@balrog.2hip.net>
Message-ID: <4a1baf8e.Lz5OEp/BR3fkQ+QO%perryh@pluto.rain.com>

Robert Noland <rnoland@FreeBSD.org> wrote:

> On Mon, 2009-05-25 at 14:12 -0700, perryh@pluto.rain.com wrote:
> > Robert Noland <rnoland@FreeBSD.org!rnoland@agora.rdrop.com> wrote:
> > 
> > > If you look at your xorg log, you should see the modes
> > > that are probed and calculated for the display.
> > 
> > Indeed, but only during startup AFAIK.  What I am looking for
> > is a way to repeat the probing and calculation, _without_
> > restarting X.  And yes, I recognize that -- since X is not
> > being restarted -- such an operation will not affect what is
> > being displayed:  it will only produce a report.
> > 
> > The question is, is this possible?
>
> I am fairly certain that this happens when you do an "xrandr -q"
> Have you actually tried any of the things that I've suggested?

Yes.  You suggested:

* Running "xrandr -q".  I previously provided the output from having
  done so, noting that it appeared to be reporting the monitor info
  pertaining to the older monitor -- thus presumably cached at
  startup -- rather than anything which might have been produced
  by rerunning the probe after I had switched to the new monitor.
  There are at least three resolutions provided by the new monitor
  which are not in the "xrandr -q" report, and two of them (720x400
  and 640x350) are smaller than the old maximum of 1280x1024 and thus
  presumably should not have been suppressed based on being too large
  to be usable by the currently-running server.  Furthermore, the
  342mm x 271mm screen dimensions reported by "xrandr -q" are those
  of the old monitor; the new one is about 517mm x 324mm.

* Finding out which display driver is being used.  I replied that,
  based on the xorg.conf produced by -configure, it appeared to be
  ATI.  (If there is a better way to find out, I don't know about it.)

* Removing the modelines from xorg.conf.  I have not tried that, but
  I have observed that "xrandr -q" does not seem to cause xorg.conf
  to be reread, unless it is somehow able to do it without updating
  any of the inode's three timestamps.  (I'd expect it to update the
  access time, or perhaps the inode-change time instead if it were
  going to the trouble of explicitly setting the access time to its
  prior value.)  Thus I don't suppose that any change to xorg.conf
  would become effective until a restart of X.

* Looking in the xorg log file, after running "xrandr -q", for a new
  probe report.  "xrandr -q" does not seem to have appended anything
  to the xorg log file, nor does its manpage indicate that it should.
From adamk at voicenet.com  Tue May 26 09:19:59 2009
From: adamk at voicenet.com (Adam K Kirchhoff)
Date: Tue May 26 09:20:06 2009
Subject: re-probing DDC/EDID
In-Reply-To: <4a1baf8e.Lz5OEp/BR3fkQ+QO%perryh@pluto.rain.com>
References: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
	<1243015185.63754.104.camel@balrog.2hip.net>
	<4a1724c4.OuQCIyZ462E1cHYx%perryh@pluto.rain.com>
	<1243089327.63754.1345.camel@balrog.2hip.net>
	<4a1a288f.Z0ZX9ngtqKNukKbL%perryh@pluto.rain.com>
	<1243259500.1787.986.camel@balrog.2hip.net>
	<4a1b09b3.ewnqp2rizVfsYpk5%perryh@pluto.rain.com>
	<1243293431.1704.387.camel@balrog.2hip.net>
	<4a1baf8e.Lz5OEp/BR3fkQ+QO%perryh@pluto.rain.com>
Message-ID: <20090526051955.2c73ba62@sorrow.ashke.com>

On Tue, 26 May 2009 01:59:58 -0700
perryh@pluto.rain.com wrote:

> Yes.  You suggested:
> 
> * Running "xrandr -q".  I previously provided the output from having
>   done so, noting that it appeared to be reporting the monitor info
>   pertaining to the older monitor -- thus presumably cached at
>   startup -- rather than anything which might have been produced
>   by rerunning the probe after I had switched to the new monitor.
>   There are at least three resolutions provided by the new monitor
>   which are not in the "xrandr -q" report, and two of them (720x400
>   and 640x350) are smaller than the old maximum of 1280x1024 and thus
>   presumably should not have been suppressed based on being too large
>   to be usable by the currently-running server.  Furthermore, the
>   342mm x 271mm screen dimensions reported by "xrandr -q" are those
>   of the old monitor; the new one is about 517mm x 324mm.
> 
> * Finding out which display driver is being used.  I replied that,
>   based on the xorg.conf produced by -configure, it appeared to be
>   ATI.  (If there is a better way to find out, I don't know about it.)
> 
> * Removing the modelines from xorg.conf.  I have not tried that, but
>   I have observed that "xrandr -q" does not seem to cause xorg.conf
>   to be reread, unless it is somehow able to do it without updating
>   any of the inode's three timestamps.  (I'd expect it to update the
>   access time, or perhaps the inode-change time instead if it were
>   going to the trouble of explicitly setting the access time to its
>   prior value.)  Thus I don't suppose that any change to xorg.conf
>   would become effective until a restart of X.
> 
> * Looking in the xorg log file, after running "xrandr -q", for a new
>   probe report.  "xrandr -q" does not seem to have appended anything
>   to the xorg log file, nor does its manpage indicate that it should.

'xrandr -q' should definitey query your monitors and dump the new
information to /var/log/Xorg.0.log if you are using a driver that
supports xrandr 1.2.  If your /var/log/Xorg.0.log file shows that you
are using the radeon driver (do you have hundreds of lines starting
with "(II) RADEON"?) and it isn't working as expected, either your Xorg
installation is broken, out-of-date, or you have run into a bug that
needs to be reported upstream.

What version of Xorg do you have installed?

Adam
From rnoland at FreeBSD.org  Tue May 26 18:45:44 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Tue May 26 18:45:53 2009
Subject: re-probing DDC/EDID
In-Reply-To: <4a1baf8e.Lz5OEp/BR3fkQ+QO%perryh@pluto.rain.com>
References: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
	<1243015185.63754.104.camel@balrog.2hip.net>
	<4a1724c4.OuQCIyZ462E1cHYx%perryh@pluto.rain.com>
	<1243089327.63754.1345.camel@balrog.2hip.net>
	<4a1a288f.Z0ZX9ngtqKNukKbL%perryh@pluto.rain.com>
	<1243259500.1787.986.camel@balrog.2hip.net>
	<4a1b09b3.ewnqp2rizVfsYpk5%perryh@pluto.rain.com>
	<1243293431.1704.387.camel@balrog.2hip.net>
	<4a1baf8e.Lz5OEp/BR3fkQ+QO%perryh@pluto.rain.com>
Message-ID: <1243363479.2926.1082.camel@balrog.2hip.net>

On Tue, 2009-05-26 at 01:59 -0700, perryh@pluto.rain.com wrote:
> Robert Noland <rnoland@FreeBSD.org> wrote:
> 
> > On Mon, 2009-05-25 at 14:12 -0700, perryh@pluto.rain.com wrote:
> > > Robert Noland <rnoland@FreeBSD.org!rnoland@agora.rdrop.com> wrote:
> > > 
> > > > If you look at your xorg log, you should see the modes
> > > > that are probed and calculated for the display.
> > > 
> > > Indeed, but only during startup AFAIK.  What I am looking for
> > > is a way to repeat the probing and calculation, _without_
> > > restarting X.  And yes, I recognize that -- since X is not
> > > being restarted -- such an operation will not affect what is
> > > being displayed:  it will only produce a report.
> > > 
> > > The question is, is this possible?
> >
> > I am fairly certain that this happens when you do an "xrandr -q"
> > Have you actually tried any of the things that I've suggested?
> 
> Yes.  You suggested:
> 
> * Running "xrandr -q".  I previously provided the output from having
>   done so, noting that it appeared to be reporting the monitor info
>   pertaining to the older monitor -- thus presumably cached at
>   startup -- rather than anything which might have been produced
>   by rerunning the probe after I had switched to the new monitor.
>   There are at least three resolutions provided by the new monitor
>   which are not in the "xrandr -q" report, and two of them (720x400
>   and 640x350) are smaller than the old maximum of 1280x1024 and thus
>   presumably should not have been suppressed based on being too large
>   to be usable by the currently-running server.  Furthermore, the
>   342mm x 271mm screen dimensions reported by "xrandr -q" are those
>   of the old monitor; the new one is about 517mm x 324mm.

Watch xorg.log while running xrandr -q.  If you have a virtual set large
enough to display the new larger mode then it will show up...

robert.

> * Finding out which display driver is being used.  I replied that,
>   based on the xorg.conf produced by -configure, it appeared to be
>   ATI.  (If there is a better way to find out, I don't know about it.)
> 
> * Removing the modelines from xorg.conf.  I have not tried that, but
>   I have observed that "xrandr -q" does not seem to cause xorg.conf
>   to be reread, unless it is somehow able to do it without updating
>   any of the inode's three timestamps.  (I'd expect it to update the
>   access time, or perhaps the inode-change time instead if it were
>   going to the trouble of explicitly setting the access time to its
>   prior value.)  Thus I don't suppose that any change to xorg.conf
>   would become effective until a restart of X.
> 
> * Looking in the xorg log file, after running "xrandr -q", for a new
>   probe report.  "xrandr -q" does not seem to have appended anything
>   to the xorg log file, nor does its manpage indicate that it should.
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090526/3c62326f/attachment.pgp
From bf2006a at yahoo.com  Tue May 26 18:52:58 2009
From: bf2006a at yahoo.com (bf)
Date: Tue May 26 18:53:03 2009
Subject: Nouveau kernel module
Message-ID: <319473.38825.qm@web39107.mail.mud.yahoo.com>


I don't know if anyone has answered your question
privately. In case they have not:

To get the kernel module nouveau.ko, you must
download Robert Noland's experimental patch:

http://people.freebsd.org/~rnoland/drm-nouveau-043009.patch

(or a later version, if it exists) and rebuild
your system after applying the patch to the latest
7-STABLE or -CURRENT sources.

See the thread from the freebsd-x11 mailing list
archives for March 2009 entitled:

[PREVIEW] Nouveau on FreeBSD (Take 2)

Remember that this module is experimental!
You can give feedback to the list, and to
rnoland@FreeBSD.org.

Good luck,
b.


      
From vidget755 at list.ru  Tue May 26 19:28:16 2009
From: vidget755 at list.ru (=?UTF-8?B?0JDQu9C10LrRgdCw0L3QtNGAINCQ0L3QtNGA0LXQtdCy0LjRhw==?=)
Date: Tue May 26 19:28:25 2009
Subject: A problem with X11 on amd64 machine.
Message-ID: <4A1C3A17.2040103@list.ru>

cant install open office:

[root@pcbsd /usr/ports/editors/openoffice.org-3]# make install
...........................
checking dependency style of cc... (cached) gcc3
CWARNFLAGS+= -Wold-style-definition -Wdeclaration-after-statement: not found
checking for cpp... /usr/bin/cpp
checking if /usr/bin/cpp requires -undef... yes
checking if /usr/bin/cpp requires -traditional... yes
checking whether to use XCB... (cached) yes
./configure: 21141: Syntax error: word unexpected (expecting ")")
===>  Script "configure" failed unexpectedly.
Please report the problem to x11@FreeBSD.org [maintainer] and attach the
"/usr/ports/x11/libX11/work/libX11-1.2/config.log" including the output of
the failure of your make command. Also, it might be a good idea to provide
an overview of all packages installed on your system (e.g. an `ls
/var/db/pkg`).
*** Error code 1

Stop in /usr/ports/x11/libX11.
*** Error code 1

Stop in /usr/ports/x11/libdmx.
*** Error code 1

Stop in /usr/ports/x11/xorg-libraries.
*** Error code 1

instaled pkg
9e-1.0                     gio-fam-backend-2.18.4     
p5-IO-Compress-Base-2.015
advancecomp-1.15           glib-2.18.4                
p5-IO-Compress-Zlib-2.015
aolserver-4.5.1_1          gperf-3.0.3                p5-PathTools-3.2900
aolserver-nszlib-1.1_2     imake-1.0.2_4,1            patch-2.5.4
arc-5.21o_1                inputproto-1.5.0           pcre-7.8
arj-3.10.22_1              javavmwrapper-2.3.2        perl-5.8.9_2
autoconf-2.62              kbproto-1.0.3              png-1.2.35
autoconf-wrapper-20071109  libXau-1.0.4               python25-2.5.4_1
automake-1.10.1            libXdmcp-1.0.2_1           tcl-8.5.6_3
automake-1.9.6_3           libcheck-0.9.6             tcl-modules-8.5.6
automake-wrapper-20071109  libiconv-1.11_1            tcl-threads-8.5.6_3
bicom-1.01                 libpthread-stubs-0.1       unrar-3.80,5
bigreqsproto-1.0.2         libslang2-2.1.4_1          unzip-5.52_5
bsd-ar-20080302            libtool-1.5.26             xcb-proto-1.4
bzip-0.21                  libxcb-1.2                 xcmiscproto-1.1.2
bzip2-1.0.5                m4-1.4.12,1                xextproto-7.0.5
cabextract-1.2             makedepend-1.0.1,1         xf86bigfontproto-1.1.2
coreutils-6.9_3            mc-4.6.2                   xineramaproto-1.1.2
cvsup-without-gui-16.1h_4  mpd-3.18_5                 xorg-cf-files-1.0.2_3
dmxproto-2.2.2             p5-Archive-Zip-1.26        xorg-macros-1.2.1
ezm3-1.1_2                 p5-Compress-Raw-Zlib-2.015 xproto-7.0.15
gamin-0.1.10               p5-Compress-Zlib-2.015     xtrans-1.2.3
gccmakedep-1.0.2           p5-File-Temp-0.21
gettext-0.17_1             p5-File-Which-0.05








-------------- next part --------------
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

It was created by libX11 configure 1.2, which was
generated by GNU Autoconf 2.62.  Invocation command line was

  $ ./configure --datadir=/usr/local/lib --with-xcb=yes --enable-malloc0returnsnull --x-libraries=/usr/local/lib --x-includes=/usr/local/include --prefix=/usr/local --mandir=/usr/local/man --infodir=/usr/local/info/ --build=amd64-portbld-freebsd7.2

## --------- ##
## Platform. ##
## --------- ##

hostname = pcbsd
uname -m = amd64
uname -r = 7.2-PRERELEASE
uname -s = FreeBSD
uname -v = FreeBSD 7.2-PRERELEASE #7: Fri Apr 17 15:35:07 EDT 2009     root@pcbsd7-x64.local:/usr/obj/pcbsd-build71/cvs/7.1-src/sys/PCBSD 

/usr/bin/uname -p = amd64
/bin/uname -X     = unknown

/bin/arch              = unknown
/usr/bin/arch -k       = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo      = unknown
/bin/machine           = unknown
/usr/bin/oslevel       = unknown
/bin/universe          = unknown

PATH: /sbin
PATH: /bin
PATH: /usr/sbin
PATH: /usr/bin
PATH: /usr/games
PATH: /Programs/bin
PATH: /PCBSD/local/bin
PATH: /PCBSD/local/sbin
PATH: /PCBSD/local/kde4/bin
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/local/kde4/bin
PATH: /root/bin


## ----------- ##
## Core tests. ##
## ----------- ##

configure:2208: checking for a BSD-compatible install
configure:2276: result: /usr/bin/install -c -o root -g wheel
configure:2287: checking whether build environment is sane
configure:2330: result: yes
configure:2355: checking for a thread-safe mkdir -p
configure:2394: result: /usr/local/bin/gmkdir -p
configure:2407: checking for gawk
configure:2423: found /PCBSD/local/bin/gawk
configure:2434: result: gawk
configure:2445: checking whether make sets $(MAKE)
configure:2467: result: yes
configure:2656: checking whether to enable maintainer-specific portions of Makefiles
configure:2665: result: no
configure:2690: checking if xorg-macros used to generate configure is at least 1.2
configure:2705: result: yes, 1.2.1
configure:2788: checking build system type
configure:2806: result: amd64-portbld-freebsd7.2
configure:2828: checking host system type
configure:2843: result: amd64-portbld-freebsd7.2
configure:2877: checking for style of include used by make
configure:2905: result: GNU
configure:2975: checking for gcc
configure:3002: result: cc
configure:3240: checking for C compiler version
configure:3248: cc --version >&5
cc (GCC) 4.2.1 20070719  [FreeBSD]
Copyright (C) 2007 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:3252: $? = 0
configure:3259: cc -v >&5
Using built-in specs.
Target: amd64-undermydesk-freebsd
Configured with: FreeBSD/amd64 system compiler
Thread model: posix
gcc version 4.2.1 20070719  [FreeBSD]
configure:3263: $? = 0
configure:3270: cc -V >&5
cc: '-V' option must have argument
configure:3274: $? = 1
configure:3297: checking for C compiler default output file name
configure:3319: cc -O2 -fno-strict-aliasing -pipe   conftest.c  >&5
configure:3323: $? = 0
configure:3361: result: a.out
configure:3378: checking whether the C compiler works
configure:3388: ./a.out
configure:3392: $? = 0
configure:3409: result: yes
configure:3416: checking whether we are cross compiling
configure:3418: result: no
configure:3421: checking for suffix of executables
configure:3428: cc -o conftest -O2 -fno-strict-aliasing -pipe   conftest.c  >&5
configure:3432: $? = 0
configure:3456: result: 
configure:3462: checking for suffix of object files
configure:3488: cc -c -O2 -fno-strict-aliasing -pipe  conftest.c >&5
configure:3492: $? = 0
configure:3515: result: o
configure:3519: checking whether we are using the GNU C compiler
configure:3548: cc -c -O2 -fno-strict-aliasing -pipe  conftest.c >&5
configure:3555: $? = 0
configure:3572: result: yes
configure:3581: checking whether cc accepts -g
configure:3611: cc -c -g  conftest.c >&5
configure:3618: $? = 0
configure:3719: result: yes
configure:3736: checking for cc option to accept ISO C89
configure:3810: cc  -c -O2 -fno-strict-aliasing -pipe  conftest.c >&5
configure:3817: $? = 0
configure:3840: result: none needed
configure:3860: checking dependency style of cc
configure:3951: result: gcc3
configure:3966: checking for a sed that does not truncate output
configure:4022: result: /usr/bin/sed
configure:4025: checking for grep that handles long lines and -e
configure:4085: result: /usr/bin/grep
configure:4090: checking for egrep
configure:4154: result: /usr/bin/grep -E
configure:4170: checking for ld used by cc
configure:4237: result: /usr/bin/ld
configure:4246: checking if the linker (/usr/bin/ld) is GNU ld
configure:4261: result: yes
configure:4266: checking for /usr/bin/ld option to reload object files
configure:4273: result: -r
configure:4291: checking for BSD-compatible nm
configure:4340: result: /usr/bin/nm -B
configure:4344: checking whether ln -s works
configure:4348: result: yes
configure:4355: checking how to recognize dependent libraries
configure:4541: result: pass_all
configure:4790: checking how to run the C preprocessor
configure:4830: cc -E  conftest.c
configure:4837: $? = 0
configure:4868: cc -E  conftest.c
conftest.c:10:28: error: ac_nonexistent.h: No such file or directory
configure:4875: $? = 1
configure: failed program was:
| /* confdefs.h.  */
| #define PACKAGE_NAME "libX11"
| #define PACKAGE_TARNAME "libX11"
| #define PACKAGE_VERSION "1.2"
| #define PACKAGE_STRING "libX11 1.2"
| #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg"
| #define PACKAGE "libX11"
| #define VERSION "1.2"
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:4908: result: cc -E
configure:4937: cc -E  conftest.c
configure:4944: $? = 0
configure:4975: cc -E  conftest.c
conftest.c:10:28: error: ac_nonexistent.h: No such file or directory
configure:4982: $? = 1
configure: failed program was:
| /* confdefs.h.  */
| #define PACKAGE_NAME "libX11"
| #define PACKAGE_TARNAME "libX11"
| #define PACKAGE_VERSION "1.2"
| #define PACKAGE_STRING "libX11 1.2"
| #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg"
| #define PACKAGE "libX11"
| #define VERSION "1.2"
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:5020: checking for ANSI C header files
configure:5050: cc -c -O2 -fno-strict-aliasing -pipe  conftest.c >&5
configure:5057: $? = 0
configure:5156: cc -o conftest -O2 -fno-strict-aliasing -pipe   conftest.c  >&5
configure:5160: $? = 0
configure:5166: ./conftest
configure:5170: $? = 0
configure:5188: result: yes
configure:5212: checking for sys/types.h
configure:5233: cc -c -O2 -fno-strict-aliasing -pipe  conftest.c >&5
configure:5240: $? = 0
configure:5257: result: yes
configure:5212: checking for sys/stat.h
configure:5233: cc -c -O2 -fno-strict-aliasing -pipe  conftest.c >&5
configure:5240: $? = 0
configure:5257: result: yes
configure:5212: checking for stdlib.h
configure:5233: cc -c -O2 -fno-strict-aliasing -pipe  conftest.c >&5
configure:5240: $? = 0
configure:5257: result: yes
configure:5212: checking for string.h
configure:5233: cc -c -O2 -fno-strict-aliasing -pipe  conftest.c >&5
configure:5240: $? = 0
configure:5257: result: yes
configure:5212: checking for memory.h
configure:5233: cc -c -O2 -fno-strict-aliasing -pipe  conftest.c >&5
configure:5240: $? = 0
configure:5257: result: yes
configure:5212: checking for strings.h
configure:5233: cc -c -O2 -fno-strict-aliasing -pipe  conftest.c >&5
configure:5240: $? = 0
configure:5257: result: yes
configure:5212: checking for inttypes.h
configure:5233: cc -c -O2 -fno-strict-aliasing -pipe  conftest.c >&5
configure:5240: $? = 0
configure:5257: result: yes
configure:5212: checking for stdint.h
configure:5233: cc -c -O2 -fno-strict-aliasing -pipe  conftest.c >&5
configure:5240: $? = 0
configure:5257: result: yes
configure:5212: checking for unistd.h
configure:5233: cc -c -O2 -fno-strict-aliasing -pipe  conftest.c >&5
configure:5240: $? = 0
configure:5257: result: yes
configure:5286: checking dlfcn.h usability
configure:5303: cc -c -O2 -fno-strict-aliasing -pipe  conftest.c >&5
configure:5310: $? = 0
configure:5324: result: yes
configure:5328: checking dlfcn.h presence
configure:5343: cc -E  conftest.c
configure:5350: $? = 0
configure:5364: result: yes
configure:5397: checking for dlfcn.h
configure:5406: result: yes
configure:5536: checking for C++ compiler version
configure:5544: c++ --version >&5
c++ (GCC) 4.2.1 20070719  [FreeBSD]
Copyright (C) 2007 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:5548: $? = 0
configure:5555: c++ -v >&5
Using built-in specs.
Target: amd64-undermydesk-freebsd
Configured with: FreeBSD/amd64 system compiler
Thread model: posix
gcc version 4.2.1 20070719  [FreeBSD]
configure:5559: $? = 0
configure:5566: c++ -V >&5
c++: '-V' option must have argument
configure:5570: $? = 1
configure:5573: checking whether we are using the GNU C++ compiler
configure:5602: c++ -c -O2 -fno-strict-aliasing -pipe  conftest.cpp >&5
configure:5609: $? = 0
configure:5626: result: yes
configure:5635: checking whether c++ accepts -g
configure:5665: c++ -c -g  conftest.cpp >&5
configure:5672: $? = 0
configure:5773: result: yes
configure:5798: checking dependency style of c++
configure:5889: result: gcc3
configure:5914: checking how to run the C++ preprocessor
configure:5950: c++ -E  conftest.cpp
configure:5957: $? = 0
configure:5988: c++ -E  conftest.cpp
conftest.cpp:21:28: error: ac_nonexistent.h: No such file or directory
configure:5995: $? = 1
configure: failed program was:
| /* confdefs.h.  */
| #define PACKAGE_NAME "libX11"
| #define PACKAGE_TARNAME "libX11"
| #define PACKAGE_VERSION "1.2"
| #define PACKAGE_STRING "libX11 1.2"
| #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg"
| #define PACKAGE "libX11"
| #define VERSION "1.2"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:6028: result: c++ -E
configure:6057: c++ -E  conftest.cpp
configure:6064: $? = 0
configure:6095: c++ -E  conftest.cpp
conftest.cpp:21:28: error: ac_nonexistent.h: No such file or directory
configure:6102: $? = 1
configure: failed program was:
| /* confdefs.h.  */
| #define PACKAGE_NAME "libX11"
| #define PACKAGE_TARNAME "libX11"
| #define PACKAGE_VERSION "1.2"
| #define PACKAGE_STRING "libX11 1.2"
| #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg"
| #define PACKAGE "libX11"
| #define VERSION "1.2"
| #define STDC_HEADERS 1
| #define HAVE_SYS_TYPES_H 1
| #define HAVE_SYS_STAT_H 1
| #define HAVE_STDLIB_H 1
| #define HAVE_STRING_H 1
| #define HAVE_MEMORY_H 1
| #define HAVE_STRINGS_H 1
| #define HAVE_INTTYPES_H 1
| #define HAVE_STDINT_H 1
| #define HAVE_UNISTD_H 1
| #define HAVE_DLFCN_H 1
| /* end confdefs.h.  */
| #include <ac_nonexistent.h>
configure:6195: checking for g77
configure:6225: result: no
configure:6195: checking for xlf
configure:6225: result: no
configure:6195: checking for f77
configure:6225: result: no
configure:6195: checking for frt
configure:6225: result: no
configure:6195: checking for pgf77
configure:6225: result: no
configure:6195: checking for cf77
configure:6225: result: no
configure:6195: checking for fort77
configure:6225: result: no
configure:6195: checking for fl32
configure:6225: result: no
configure:6195: checking for af77
configure:6225: result: no
configure:6195: checking for xlf90
configure:6225: result: no
configure:6195: checking for f90
configure:6225: result: no
configure:6195: checking for pgf90
configure:6225: result: no
configure:6195: checking for pghpf
configure:6225: result: no
configure:6195: checking for epcf90
configure:6225: result: no
configure:6195: checking for gfortran
configure:6225: result: no
configure:6195: checking for g95
configure:6225: result: no
configure:6195: checking for xlf95
configure:6225: result: no
configure:6195: checking for f95
configure:6225: result: no
configure:6195: checking for fort
configure:6225: result: no
configure:6195: checking for ifort
configure:6225: result: no
configure:6195: checking for ifc
configure:6225: result: no
configure:6195: checking for efc
configure:6225: result: no
configure:6195: checking for pgf95
configure:6225: result: no
configure:6195: checking for lf95
configure:6225: result: no
configure:6195: checking for ftn
configure:6225: result: no
configure:6252: checking for Fortran 77 compiler version
configure:6260:  --version >&5
--version: not found
configure:6264: $? = 127
configure:6271:  -v >&5
-v: not found
configure:6275: $? = 127
configure:6282:  -V >&5
-V: not found
configure:6286: $? = 127
configure:6294: checking whether we are using the GNU Fortran 77 compiler
configure:6313:  -c  conftest.F >&5
-c: not found
configure:6320: $? = 127
configure: failed program was:
|       program main
| #ifndef __GNUC__
|        choke me
| #endif
| 
|       end
configure:6337: result: no
configure:6343: checking whether  accepts -g
configure:6360:  -c -g conftest.f >&5
-c: not found
configure:6367: $? = 127
configure: failed program was:
|       program main
| 
|       end
configure:6383: result: no
configure:6416: checking the maximum length of command line arguments
configure:6528: result: 262144
configure:6540: checking command to parse /usr/bin/nm -B output from cc object
configure:6645: cc -c -O2 -fno-strict-aliasing -pipe  conftest.c >&5
configure:6648: $? = 0
configure:6652: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ 	]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ 	][ 	]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' \> conftest.nm
configure:6655: $? = 0
configure:6707: cc -o conftest -O2 -fno-strict-aliasing -pipe   conftest.c conftstm.o >&5
configure:6710: $? = 0
configure:6748: result: ok
configure:6752: checking for objdir
configure:6767: result: .libs
configure:6859: checking for ar
configure:6875: found /usr/bin/ar
configure:6886: result: ar
configure:6955: checking for ranlib
configure:6971: found /usr/bin/ranlib
configure:6982: result: ranlib
configure:7051: checking for strip
configure:7067: found /usr/bin/strip
configure:7078: result: strip
configure:7680: checking if cc supports -fno-rtti -fno-exceptions
configure:7698: cc -c -O2 -fno-strict-aliasing -pipe  -fno-rtti -fno-exceptions conftest.c >&5
cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C
configure:7702: $? = 0
configure:7715: result: no
configure:7730: checking for cc option to produce PIC
configure:7962: result: -fPIC
configure:7970: checking if cc PIC flag -fPIC works
configure:7988: cc -c -O2 -fno-strict-aliasing -pipe  -fPIC -DPIC conftest.c >&5
configure:7992: $? = 0
configure:8005: result: yes
configure:8033: checking if cc static flag -static works
configure:8061: result: yes
configure:8071: checking if cc supports -c -o file.o
configure:8092: cc -c -O2 -fno-strict-aliasing -pipe  -o out/conftest2.o conftest.c >&5
configure:8096: $? = 0
configure:8118: result: yes
configure:8144: checking whether the cc linker (/usr/bin/ld) supports shared libraries
configure:9132: result: yes
configure:9153: checking whether -lc should be explicitly linked in
configure:9158: cc -c -O2 -fno-strict-aliasing -pipe  conftest.c >&5
configure:9161: $? = 0
configure:9176: cc -shared conftest.o  -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep  -lc  \>/dev/null 2\>\&1
configure:9179: $? = 0
configure:9191: result: no
configure:9199: checking dynamic linker characteristics
configure:9801: result: freebsd7.2 ld.so
configure:9825: checking how to hardcode library paths into programs
configure:9850: result: immediate
configure:9864: checking whether stripping libraries is possible
configure:9869: result: yes
configure:10699: checking if libtool supports shared libraries
configure:10701: result: yes
configure:10704: checking whether to build shared libraries
configure:10725: result: yes
configure:10728: checking whether to build static libraries
configure:10732: result: yes
configure:10826: creating libtool
configure:11419: checking for ld used by c++
configure:11486: result: /usr/bin/ld
configure:11495: checking if the linker (/usr/bin/ld) is GNU ld
configure:11510: result: yes
configure:11561: checking whether the c++ linker (/usr/bin/ld) supports shared libraries
configure:12515: result: yes
configure:12532: c++ -c -O2 -fno-strict-aliasing -pipe  conftest.cpp >&5
configure:12535: $? = 0
configure:12691: checking for c++ option to produce PIC
configure:12975: result: -fPIC
configure:12983: checking if c++ PIC flag -fPIC works
configure:13001: c++ -c -O2 -fno-strict-aliasing -pipe  -fPIC -DPIC conftest.cpp >&5
configure:13005: $? = 0
configure:13018: result: yes
configure:13046: checking if c++ static flag -static works
configure:13074: result: yes
configure:13084: checking if c++ supports -c -o file.o
configure:13105: c++ -c -O2 -fno-strict-aliasing -pipe  -o out/conftest2.o conftest.cpp >&5
configure:13109: $? = 0
configure:13131: result: yes
configure:13157: checking whether the c++ linker (/usr/bin/ld) supports shared libraries
configure:13183: result: yes
configure:13250: checking dynamic linker characteristics
configure:13800: result: freebsd7.2 ld.so
configure:13824: checking how to hardcode library paths into programs
configure:13849: result: immediate
configure:20134: checking for gcc
configure:20161: result: cc
configure:20399: checking for C compiler version
configure:20407: cc --version >&5
cc (GCC) 4.2.1 20070719  [FreeBSD]
Copyright (C) 2007 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:20411: $? = 0
configure:20418: cc -v >&5
Using built-in specs.
Target: amd64-undermydesk-freebsd
Configured with: FreeBSD/amd64 system compiler
Thread model: posix
gcc version 4.2.1 20070719  [FreeBSD]
configure:20422: $? = 0
configure:20429: cc -V >&5
cc: '-V' option must have argument
configure:20433: $? = 1
configure:20436: checking whether we are using the GNU C compiler
configure:20489: result: yes
configure:20498: checking whether cc accepts -g
configure:20636: result: yes
configure:20653: checking for cc option to accept ISO C89
configure:20757: result: none needed
configure:20777: checking dependency style of cc
configure:20868: result: gcc3
configure:21017: checking for cpp
configure:21036: found /usr/bin/cpp
configure:21048: result: /usr/bin/cpp
configure:21064: checking if /usr/bin/cpp requires -undef
configure:21075: result: yes
configure:21090: checking if /usr/bin/cpp requires -traditional
configure:21101: result: yes
configure:21122: checking whether to use XCB
configure:21129: result: yes

## ---------------- ##
## Cache variables. ##
## ---------------- ##

ac_cv_build=amd64-portbld-freebsd7.2
ac_cv_c_compiler_gnu=yes
ac_cv_cxx_compiler_gnu=yes
ac_cv_env_CCC_set=''
ac_cv_env_CCC_value=''
ac_cv_env_CC_set=set
ac_cv_env_CC_value=cc
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-O2 -fno-strict-aliasing -pipe'
ac_cv_env_CPPFLAGS_set=''
ac_cv_env_CPPFLAGS_value=''
ac_cv_env_CPP_set=''
ac_cv_env_CPP_value=''
ac_cv_env_CXXCPP_set=''
ac_cv_env_CXXCPP_value=''
ac_cv_env_CXXFLAGS_set=set
ac_cv_env_CXXFLAGS_value='-O2 -fno-strict-aliasing -pipe'
ac_cv_env_CXX_set=set
ac_cv_env_CXX_value=c++
ac_cv_env_F77_set=''
ac_cv_env_F77_value=''
ac_cv_env_FFLAGS_set=''
ac_cv_env_FFLAGS_value=''
ac_cv_env_LDFLAGS_set=''
ac_cv_env_LDFLAGS_value=''
ac_cv_env_LIBS_set=''
ac_cv_env_LIBS_value=''
ac_cv_env_build_alias_set=set
ac_cv_env_build_alias_value=amd64-portbld-freebsd7.2
ac_cv_env_host_alias_set=''
ac_cv_env_host_alias_value=''
ac_cv_env_target_alias_set=''
ac_cv_env_target_alias_value=''
ac_cv_f77_compiler_gnu=no
ac_cv_header_dlfcn_h=yes
ac_cv_header_inttypes_h=yes
ac_cv_header_memory_h=yes
ac_cv_header_stdc=yes
ac_cv_header_stdint_h=yes
ac_cv_header_stdlib_h=yes
ac_cv_header_string_h=yes
ac_cv_header_strings_h=yes
ac_cv_header_sys_stat_h=yes
ac_cv_header_sys_types_h=yes
ac_cv_header_unistd_h=yes
ac_cv_host=amd64-portbld-freebsd7.2
ac_cv_objext=o
ac_cv_path_EGREP='/usr/bin/grep -E'
ac_cv_path_GREP=/usr/bin/grep
ac_cv_path_RAWCPP=/usr/bin/cpp
ac_cv_path_mkdir=/usr/local/bin/gmkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_CPP='cc -E'
ac_cv_prog_CXXCPP='c++ -E'
ac_cv_prog_ac_ct_AR=ar
ac_cv_prog_ac_ct_CC=cc
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_prog_cc_c89=''
ac_cv_prog_cc_g=yes
ac_cv_prog_cxx_g=yes
ac_cv_prog_f77_g=no
ac_cv_prog_make_make_set=yes
ac_cv_use_xcb=yes
am_cv_CC_dependencies_compiler_type=gcc3
am_cv_CXX_dependencies_compiler_type=gcc3
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=''
lt_cv_ld_reload_flag=-r
lt_cv_objdir=.libs
lt_cv_path_LD=/usr/bin/ld
lt_cv_path_LDCXX=/usr/bin/ld
lt_cv_path_NM='/usr/bin/nm -B'
lt_cv_path_SED=/usr/bin/sed
lt_cv_prog_compiler_c_o=yes
lt_cv_prog_compiler_c_o_CXX=yes
lt_cv_prog_compiler_pic_works=yes
lt_cv_prog_compiler_pic_works_CXX=yes
lt_cv_prog_compiler_rtti_exceptions=no
lt_cv_prog_compiler_static_works=yes
lt_cv_prog_compiler_static_works_CXX=yes
lt_cv_prog_gnu_ld=yes
lt_cv_prog_gnu_ldcxx=yes
lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ 	]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ 	][ 	]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\'''
lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/  {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/  {"\2", (lt_ptr) \&\2},/p'\'''
lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern int \1;/p'\'''
lt_cv_sys_lib_dlsearch_path_spec='/lib /usr/lib'
lt_cv_sys_lib_search_path_spec=/usr/lib
lt_cv_sys_max_cmd_len=262144
lt_lt_cv_prog_compiler_c_o='"yes"'
lt_lt_cv_prog_compiler_c_o_CXX='"yes"'
lt_lt_cv_sys_global_symbol_pipe='"sed -n -e '\''s/^.*[ 	]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[ 	][ 	]*\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2 \\2/p'\''"'
lt_lt_cv_sys_global_symbol_to_c_name_address='"sed -n -e '\''s/^: \\([^ ]*\\) \$/  {\\\"\\1\\\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/  {\"\\2\", (lt_ptr) \\&\\2},/p'\''"'
lt_lt_cv_sys_global_symbol_to_cdecl='"sed -n -e '\''s/^. .* \\(.*\\)\$/extern int \\1;/p'\''"'

## ----------------- ##
## Output variables. ##
## ----------------- ##

ACLOCAL='/usr/local/bin/aclocal-1.10'
ADMIN_MAN_DIR=''
ADMIN_MAN_SUFFIX=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='${SHELL} /usr/ports/x11/libX11/work/libX11-1.2/missing --run tar'
APP_MAN_DIR=''
APP_MAN_SUFFIX=''
AR='ar'
AUTOCONF='/usr/local/bin/autoconf-2.62'
AUTOHEADER='/usr/local/bin/autoheader-2.62'
AUTOMAKE='/usr/local/bin/automake-1.10'
AWK='gawk'
BIGFONT_CFLAGS=''
BIGFONT_LIBS=''
CC='cc'
CCDEPMODE='depmode=gcc3'
CC_FOR_BUILD='cc'
CFLAGS='-O2 -fno-strict-aliasing -pipe'
CHANGELOG_CMD=''
CPP='cc -E'
CPPFLAGS=''
CWARNFLAGS='-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -Wbad-function-cast'
CXX='c++'
CXXCPP='c++ -E'
CXXDEPMODE='depmode=gcc3'
CXXFLAGS='-O2 -fno-strict-aliasing -pipe'
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DRIVER_MAN_DIR=''
DRIVER_MAN_SUFFIX=''
DSYMUTIL=''
ECHO='echo'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/usr/bin/grep -E'
EXEEXT=''
F77=''
FFLAGS=''
FILE_MAN_DIR=''
FILE_MAN_SUFFIX=''
GREP='/usr/bin/grep'
I18N_MODULE_LIBS=''
INSTALL_DATA='install  -o root -g wheel -m 444'
INSTALL_PROGRAM='install  -s -o root -g wheel -m 555'
INSTALL_SCRIPT='install  -o root -g wheel -m 555'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
KEYSYMDEF=''
LAUNCHD=''
LDFLAGS=''
LIBOBJS=''
LIBS=''
LIBTOOL='$(SHELL) /usr/local/bin/libtool'
LIB_MAN_DIR=''
LIB_MAN_SUFFIX=''
LINT=''
LINTLIB=''
LINT_FALSE=''
LINT_FLAGS=''
LINT_TRUE=''
LN_S='ln -s'
LTLIBOBJS=''
MAINT='#'
MAINTAINER_MODE_FALSE=''
MAINTAINER_MODE_TRUE='#'
MAKEINFO='${SHELL} /usr/ports/x11/libX11/work/libX11-1.2/missing --run makeinfo'
MAKE_LINT_LIB_FALSE=''
MAKE_LINT_LIB_TRUE=''
MALLOC_ZERO_CFLAGS=''
MANPAGES_FALSE=''
MANPAGES_TRUE=''
MISC_MAN_DIR=''
MISC_MAN_SUFFIX=''
MKDIR_P='/usr/local/bin/gmkdir -p'
NMEDIT=''
OBJEXT='o'
OS2_FALSE=''
OS2_TRUE=''
PACKAGE='libX11'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg'
PACKAGE_NAME='libX11'
PACKAGE_STRING='libX11 1.2'
PACKAGE_TARNAME='libX11'
PACKAGE_VERSION='1.2'
PATH_SEPARATOR=':'
RANLIB='ranlib'
RAWCPP='/usr/bin/cpp'
RAWCPPFLAGS='-undef -traditional'
SED='/usr/bin/sed'
SET_MAKE=''
SHELL='/bin/sh'
STRIP='strip'
THRSTUBS_FALSE=''
THRSTUBS_TRUE=''
UDC_FALSE=''
UDC_TRUE=''
VERSION='1.2'
WCHAR32=''
X11_CFLAGS=''
X11_DATADIR=''
X11_EXTRA_DEPS=''
X11_LIBDIR=''
X11_LIBS=''
X11_LOCALEDATADIR=''
X11_LOCALEDIR=''
X11_LOCALELIBDIR=''
XCB_FALSE='#'
XCB_TRUE=''
XCMS_FALSE=''
XCMS_TRUE=''
XDMCP_CFLAGS=''
XDMCP_LIBS=''
XERRORDB=''
XKBPROTO_REQUIRES=''
XKB_FALSE=''
XKB_TRUE=''
XKEYSYMDB=''
XLIB_LOADABLE_I18N_FALSE=''
XLIB_LOADABLE_I18N_TRUE=''
XLOCALEDATADIR=''
XLOCALEDIR=''
XLOCALELIBDIR=''
XLOCALE_FALSE=''
XLOCALE_TRUE=''
XMALLOC_ZERO_CFLAGS=''
XPROTO_CFLAGS=''
XTHREADLIB=''
XTHREAD_CFLAGS=''
XTMALLOC_ZERO_CFLAGS=''
ac_ct_CC='cc'
ac_ct_CXX=''
ac_ct_F77=''
am__fastdepCC_FALSE='#'
am__fastdepCC_TRUE=''
am__fastdepCXX_FALSE='#'
am__fastdepCXX_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__quote=''
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build='amd64-portbld-freebsd7.2'
build_alias='amd64-portbld-freebsd7.2'
build_cpu='amd64'
build_os='freebsd7.2'
build_vendor='portbld'
datadir='/usr/local/lib'
datarootdir='${prefix}/share'
distcleancheck_listfiles=''
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host='amd64-portbld-freebsd7.2'
host_alias=''
host_cpu='amd64'
host_os='freebsd7.2'
host_vendor='portbld'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='/usr/local/info'
install_sh='$(SHELL) /usr/ports/x11/libX11/work/libX11-1.2/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='/usr/local/man'
mkdir_p='/usr/local/bin/gmkdir -p'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr/local'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''

## ----------- ##
## confdefs.h. ##
## ----------- ##

#define PACKAGE_NAME "libX11"
#define PACKAGE_TARNAME "libX11"
#define PACKAGE_VERSION "1.2"
#define PACKAGE_STRING "libX11 1.2"
#define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg"
#define PACKAGE "libX11"
#define VERSION "1.2"
#define STDC_HEADERS 1
#define HAVE_SYS_TYPES_H 1
#define HAVE_SYS_STAT_H 1
#define HAVE_STDLIB_H 1
#define HAVE_STRING_H 1
#define HAVE_MEMORY_H 1
#define HAVE_STRINGS_H 1
#define HAVE_INTTYPES_H 1
#define HAVE_STDINT_H 1
#define HAVE_UNISTD_H 1
#define HAVE_DLFCN_H 1

configure: exit 2
From perryh at pluto.rain.com  Wed May 27 09:41:32 2009
From: perryh at pluto.rain.com (perryh@pluto.rain.com)
Date: Wed May 27 09:41:44 2009
Subject: re-probing DDC/EDID
In-Reply-To: <20090526051955.2c73ba62@sorrow.ashke.com>
References: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
	<1243015185.63754.104.camel@balrog.2hip.net>
	<4a1724c4.OuQCIyZ462E1cHYx%perryh@pluto.rain.com>
	<1243089327.63754.1345.camel@balrog.2hip.net>
	<4a1a288f.Z0ZX9ngtqKNukKbL%perryh@pluto.rain.com>
	<1243259500.1787.986.camel@balrog.2hip.net>
	<4a1b09b3.ewnqp2rizVfsYpk5%perryh@pluto.rain.com>
	<1243293431.1704.387.camel@balrog.2hip.net>
	<4a1baf8e.Lz5OEp/BR3fkQ+QO%perryh@pluto.rain.com>
	<20090526051955.2c73ba62@sorrow.ashke.com>
Message-ID: <4a1d0812.wF4v52gYoURjHyHb%perryh@pluto.rain.com>

Adam K Kirchhoff <adamk@voicenet.com> wrote:

> 'xrandr -q' should definitey query your monitors and dump the new
> information to /var/log/Xorg.0.log if you are using a driver that
> supports xrandr 1.2.

That may be the problem:

  $ xrandr --version
  Server reports RandR version 1.1

> If your /var/log/Xorg.0.log file shows that you are using the
> radeon driver (do you have hundreds of lines starting with
> "(II) RADEON"?)

I have one such line:

  (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),

followed by about a hundred more listing additional ATI chipsets
(but no more with the "(II) RADEON" prefix).

...

> What version of Xorg do you have installed?

  $ Xorg -version

  X Window System Version 6.9.0
  Release Date: 21 December 2005
  X Protocol Version 11, Revision 0, Release 6.9
  Build Operating System: FreeBSD 6.1 i386 [ELF] 
  Current Operating System: FreeBSD fbsd61 6.1-RELEASE FreeBSD 6.1-RELEASE #30: Mon Jan  1 23:01:34 PST 2007     perryh@fbsd61:/usr/src/sys/i386/compile/GENERIC i386
  Build Date: 24 March 2006
          Before reporting problems, check http://wiki.X.Org
          to make sure that you have the latest version.
  Module Loader present
From perryh at pluto.rain.com  Wed May 27 09:41:33 2009
From: perryh at pluto.rain.com (perryh@pluto.rain.com)
Date: Wed May 27 09:41:44 2009
Subject: re-probing DDC/EDID
In-Reply-To: <1243363479.2926.1082.camel@balrog.2hip.net>
References: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
	<1243015185.63754.104.camel@balrog.2hip.net>
	<4a1724c4.OuQCIyZ462E1cHYx%perryh@pluto.rain.com>
	<1243089327.63754.1345.camel@balrog.2hip.net>
	<4a1a288f.Z0ZX9ngtqKNukKbL%perryh@pluto.rain.com>
	<1243259500.1787.986.camel@balrog.2hip.net>
	<4a1b09b3.ewnqp2rizVfsYpk5%perryh@pluto.rain.com>
	<1243293431.1704.387.camel@balrog.2hip.net>
	<4a1baf8e.Lz5OEp/BR3fkQ+QO%perryh@pluto.rain.com>
	<1243363479.2926.1082.camel@balrog.2hip.net>
Message-ID: <4a1d0841.aRu1EXJEUJCmcy7w%perryh@pluto.rain.com>

Robert Noland <rnoland@FreeBSD.org> wrote:

> > * Running "xrandr -q".  I previously provided the output from having
> >   done so, noting that it appeared to be reporting the monitor info
> >   pertaining to the older monitor -- thus presumably cached at
> >   startup -- rather than anything which might have been produced
> >   by rerunning the probe after I had switched to the new monitor.
> >   There are at least three resolutions provided by the new monitor
> >   which are not in the "xrandr -q" report, and two of them (720x400
> >   and 640x350) are smaller than the old maximum of 1280x1024 and thus
> >   presumably should not have been suppressed based on being too large
> >   to be usable by the currently-running server.  Furthermore, the
> >   342mm x 271mm screen dimensions reported by "xrandr -q" are those
> >   of the old monitor; the new one is about 517mm x 324mm.
>
> Watch xorg.log while running xrandr -q.  If you have a virtual set
> large enough to display the new larger mode then it will show up...

A "tail -f" on /var/log/Xorg.0.log showed nothing while running
"xrandr -q" in a different xterm.
From adamk at voicenet.com  Wed May 27 10:39:19 2009
From: adamk at voicenet.com (Adam K Kirchhoff)
Date: Wed May 27 10:39:26 2009
Subject: re-probing DDC/EDID
In-Reply-To: <4a1d0812.wF4v52gYoURjHyHb%perryh@pluto.rain.com>
References: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
	<1243015185.63754.104.camel@balrog.2hip.net>
	<4a1724c4.OuQCIyZ462E1cHYx%perryh@pluto.rain.com>
	<1243089327.63754.1345.camel@balrog.2hip.net>
	<4a1a288f.Z0ZX9ngtqKNukKbL%perryh@pluto.rain.com>
	<1243259500.1787.986.camel@balrog.2hip.net>
	<4a1b09b3.ewnqp2rizVfsYpk5%perryh@pluto.rain.com>
	<1243293431.1704.387.camel@balrog.2hip.net>
	<4a1baf8e.Lz5OEp/BR3fkQ+QO%perryh@pluto.rain.com>
	<20090526051955.2c73ba62@sorrow.ashke.com>
	<4a1d0812.wF4v52gYoURjHyHb%perryh@pluto.rain.com>
Message-ID: <20090527062539.081a21ab@voicenet.com>

On Wed, 27 May 2009 02:29:54 -0700
perryh@pluto.rain.com wrote:

> Adam K Kirchhoff <adamk@voicenet.com> wrote:
> 
> > 'xrandr -q' should definitey query your monitors and dump the new
> > information to /var/log/Xorg.0.log if you are using a driver that
> > supports xrandr 1.2.
> 
> That may be the problem:
> 
>   $ xrandr --version
>   Server reports RandR version 1.1
> 
> > If your /var/log/Xorg.0.log file shows that you are using the
> > radeon driver (do you have hundreds of lines starting with
> > "(II) RADEON"?)
> 
> I have one such line:
> 
>   (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
> 
> followed by about a hundred more listing additional ATI chipsets
> (but no more with the "(II) RADEON" prefix).
> 
> ...
> 
> > What version of Xorg do you have installed?
> 
>   $ Xorg -version
> 
>   X Window System Version 6.9.0
>   Release Date: 21 December 2005
>   X Protocol Version 11, Revision 0, Release 6.9
>   Build Operating System: FreeBSD 6.1 i386 [ELF] 
>   Current Operating System: FreeBSD fbsd61 6.1-RELEASE FreeBSD 6.1-RELEASE #30: Mon Jan  1 23:01:34 PST 2007     perryh@fbsd61:/usr/src/sys/i386/compile/GENERIC i386
>   Build Date: 24 March 2006
>           Before reporting problems, check http://wiki.X.Org
>           to make sure that you have the latest version.
>   Module Loader present
> 

You are using a very old version of Xorg there.  I'm not sure how to do
what you want without xrandr 1.2 (perhaps someone else does), and to get
xrandr 1.2 you will definitely need to upgrade.

Adam
From invalid.pointer at gmail.com  Wed May 27 13:09:08 2009
From: invalid.pointer at gmail.com (Manish Jain)
Date: Wed May 27 13:09:14 2009
Subject: Support for nVidia GeForce 7025/7050PV/nForce 630a graphics
Message-ID: <4A1D348F.8090504@gmail.com>


Hello,

I am thinking of going in for an AMD solution for my new home PC.

Does FreeBSD work easily with Asus M2N68-AM (nvidia GeForce 7025/nForce 
630a graphics as per Asus; nvidia GeForce 7050PV/nForce 630a graphics as 
per CNET/other sites). I would probably be using this along with Athlon 
Dual-Core 5200+

FreeBSD-7.1's drm directory in src does NOT seem to have a listing for 
GeForce 7025/GeForce 7050/nForce 630a. And xorgconfigurator just lists 
one (generic) driver nv for nvidia. So would DRI work ?

I ask this because I currently have an i810-based motherboard for which 
there is no DRI support in FreeBSD and I need to make sure I don't end 
up without DRI again.

-- 
Regards
Manish Jain
invalid.pointer@gmail.com
+91-96500-10329

Laast year I kudn't spell Software Engineer. Now I are won.
From rnoland at FreeBSD.org  Wed May 27 13:33:28 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Wed May 27 13:33:35 2009
Subject: re-probing DDC/EDID
In-Reply-To: <4a1d0841.aRu1EXJEUJCmcy7w%perryh@pluto.rain.com>
References: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
	<1243015185.63754.104.camel@balrog.2hip.net>
	<4a1724c4.OuQCIyZ462E1cHYx%perryh@pluto.rain.com>
	<1243089327.63754.1345.camel@balrog.2hip.net>
	<4a1a288f.Z0ZX9ngtqKNukKbL%perryh@pluto.rain.com>
	<1243259500.1787.986.camel@balrog.2hip.net>
	<4a1b09b3.ewnqp2rizVfsYpk5%perryh@pluto.rain.com>
	<1243293431.1704.387.camel@balrog.2hip.net>
	<4a1baf8e.Lz5OEp/BR3fkQ+QO%perryh@pluto.rain.com>
	<1243363479.2926.1082.camel@balrog.2hip.net>
	<4a1d0841.aRu1EXJEUJCmcy7w%perryh@pluto.rain.com>
Message-ID: <1243431141.2926.2230.camel@balrog.2hip.net>

On Wed, 2009-05-27 at 02:30 -0700, perryh@pluto.rain.com wrote:
> Robert Noland <rnoland@FreeBSD.org> wrote:
> 
> > > * Running "xrandr -q".  I previously provided the output from having
> > >   done so, noting that it appeared to be reporting the monitor info
> > >   pertaining to the older monitor -- thus presumably cached at
> > >   startup -- rather than anything which might have been produced
> > >   by rerunning the probe after I had switched to the new monitor.
> > >   There are at least three resolutions provided by the new monitor
> > >   which are not in the "xrandr -q" report, and two of them (720x400
> > >   and 640x350) are smaller than the old maximum of 1280x1024 and thus
> > >   presumably should not have been suppressed based on being too large
> > >   to be usable by the currently-running server.  Furthermore, the
> > >   342mm x 271mm screen dimensions reported by "xrandr -q" are those
> > >   of the old monitor; the new one is about 517mm x 324mm.
> >
> > Watch xorg.log while running xrandr -q.  If you have a virtual set
> > large enough to display the new larger mode then it will show up...
> 
> A "tail -f" on /var/log/Xorg.0.log showed nothing while running
> "xrandr -q" in a different xterm.

Hrm, it does with the nouveau driver that I'm running right now... I'll
have to pop in a radeon and see, but that would be the "right" way to
handle this.  As I said, as long as your front buffer is large enough to
cover the new size it should show up and work.

robert.

-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090527/a483939c/attachment.pgp
From rnoland at FreeBSD.org  Wed May 27 13:54:15 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Wed May 27 13:54:21 2009
Subject: re-probing DDC/EDID
In-Reply-To: <4a1d0812.wF4v52gYoURjHyHb%perryh@pluto.rain.com>
References: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
	<1243015185.63754.104.camel@balrog.2hip.net>
	<4a1724c4.OuQCIyZ462E1cHYx%perryh@pluto.rain.com>
	<1243089327.63754.1345.camel@balrog.2hip.net>
	<4a1a288f.Z0ZX9ngtqKNukKbL%perryh@pluto.rain.com>
	<1243259500.1787.986.camel@balrog.2hip.net>
	<4a1b09b3.ewnqp2rizVfsYpk5%perryh@pluto.rain.com>
	<1243293431.1704.387.camel@balrog.2hip.net>
	<4a1baf8e.Lz5OEp/BR3fkQ+QO%perryh@pluto.rain.com>
	<20090526051955.2c73ba62@sorrow.ashke.com>
	<4a1d0812.wF4v52gYoURjHyHb%perryh@pluto.rain.com>
Message-ID: <1243432390.2926.2253.camel@balrog.2hip.net>

On Wed, 2009-05-27 at 02:29 -0700, perryh@pluto.rain.com wrote:
> Adam K Kirchhoff <adamk@voicenet.com> wrote:
> 
> > 'xrandr -q' should definitey query your monitors and dump the new
> > information to /var/log/Xorg.0.log if you are using a driver that
> > supports xrandr 1.2.
> 
> That may be the problem:
> 
>   $ xrandr --version
>   Server reports RandR version 1.1
> 
> > If your /var/log/Xorg.0.log file shows that you are using the
> > radeon driver (do you have hundreds of lines starting with
> > "(II) RADEON"?)
> 
> I have one such line:
> 
>   (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
> 
> followed by about a hundred more listing additional ATI chipsets
> (but no more with the "(II) RADEON" prefix).
> 
> ...
> 
> > What version of Xorg do you have installed?
> 
>   $ Xorg -version
> 
>   X Window System Version 6.9.0
>   Release Date: 21 December 2005
>   X Protocol Version 11, Revision 0, Release 6.9
>   Build Operating System: FreeBSD 6.1 i386 [ELF] 
>   Current Operating System: FreeBSD fbsd61 6.1-RELEASE FreeBSD 6.1-RELEASE #30: Mon Jan  1 23:01:34 PST 2007     perryh@fbsd61:/usr/src/sys/i386/compile/GENERIC i386
>   Build Date: 24 March 2006
>           Before reporting problems, check http://wiki.X.Org
>           to make sure that you have the latest version.
>   Module Loader present

So Adam just pointed out that you are still running 6.9...  You really
should update your installed ports to something more recent.  I was
assuming that you were running relatively current ports.

robert.

> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090527/01879620/attachment.pgp
From rnoland at FreeBSD.org  Wed May 27 14:08:32 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Wed May 27 14:08:38 2009
Subject: Support for nVidia GeForce 7025/7050PV/nForce 630a graphics
In-Reply-To: <4A1D348F.8090504@gmail.com>
References: <4A1D348F.8090504@gmail.com>
Message-ID: <1243433247.2926.2277.camel@balrog.2hip.net>

On Wed, 2009-05-27 at 18:09 +0530, Manish Jain wrote:
> Hello,
> 
> I am thinking of going in for an AMD solution for my new home PC.
> 
> Does FreeBSD work easily with Asus M2N68-AM (nvidia GeForce 7025/nForce 
> 630a graphics as per Asus; nvidia GeForce 7050PV/nForce 630a graphics as 
> per CNET/other sites). I would probably be using this along with Athlon 
> Dual-Core 5200+
> 
> FreeBSD-7.1's drm directory in src does NOT seem to have a listing for 
> GeForce 7025/GeForce 7050/nForce 630a. And xorgconfigurator just lists 
> one (generic) driver nv for nvidia. So would DRI work ?

There are three possible drivers, nv (kindof old and crusty), nouveau
(in current ports), and the binary blob from Nvidia (currently i386
only).  For nv, there is no drm.  For nouveau, I have patches for drm
support that I may go ahead and commit to -CURRENT over the next couple
of days.  The current patch also applies to -STABLE.  With the patch you
should get accelerated EXA and Xv, but not 3d yet.  I have gotten the 3d
driver to sort of work, but generally it isn't in a user ready state (on
linux either).

The binary blob does whatever it does and I'll let others give you
details on that.

robert.

> I ask this because I currently have an i810-based motherboard for which 
> there is no DRI support in FreeBSD and I need to make sure I don't end 
> up without DRI again.

-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090527/6284defc/attachment.pgp
From andriy at irbisnet.com  Wed May 27 15:44:35 2009
From: andriy at irbisnet.com (Andriy Bakay)
Date: Wed May 27 15:44:42 2009
Subject: Problems with libpciaccess-0.10.6
Message-ID: <4A1D5FDD.9050306@irbisnet.com>

Hi X11 Team,

Recently I tried to upgrade to 'libpciaccess-0.10.6' port on my laptop: 
ThinkPad T61, FreeBSD 7.1 amd64, nVidia Quadro NVS 140M. And my X 
(xorg-server-1.6.0,1) server crashed during startup (see attached logs). 
I tried 'xorg-server-1.6.1' and two different nVidia drivers 'nv' and 
'nouveau' same crash, but with different log entries. After I downgrade 
to 'libpciaccess-0.10.5_6' port both drivers working fine. I attached 
the X server logs and configs for both nVidia drivers:

nv:      Xorg.0.nv.log, xorg.nv.conf
nouveau: Xorg.0.nouveau.log, xorg.nouveau.conf

Please, advise.

Thanks,
Andriy
-------------- next part --------------

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.0-RELEASE amd64 
Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4 FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
Build Date: 12 April 2009  03:12:50PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 23 21:47:12 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Synaptics_Touchpad"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "Off"
(**) Option "AIGLX" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	/usr/local/lib/X11/fonts/URW/,
	/usr/local/lib/X11/fonts/freefont/,
	/usr/local/lib/X11/fonts/TrueType/,
	/usr/local/lib/X11/fonts/bitstream-vera/,
	/usr/local/lib/X11/fonts/cyrillic/,
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	built-ins
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(**) Extension "Composite" is enabled
(**) Extension "XVideo" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(II) Loader magic: 0xb20
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @ 0x????????/65536
(II) System resource ranges:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "synaptics"
(II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.99.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "nouveau"
(II) Loading /usr/local/lib/xorg/modules/drivers//nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.0.10
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
(II) NOUVEAU driver 20090514.9656762
(II) NOUVEAU driver for NVIDIA chipset families :
	RIVA TNT    (NV04)
	RIVA TNT2   (NV05)
	GeForce 256 (NV10)
	GeForce 2   (NV11, NV15)
	GeForce 4MX (NV17, NV18)
	GeForce 3   (NV20)
	GeForce 4Ti (NV25, NV28)
	GeForce FX  (NV3x)
	GeForce 6   (NV4x)
	GeForce 7   (G7x)
	GeForce 8   (G8x)
(II) Primary Device is: PCI 01@00:00:0

Fatal server error:
Caught signal 11.  Server aborting


Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

-------------- next part --------------
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
#	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Synaptics_Touchpad" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	Option         "DontZap" "Off"
	Option         "AIGLX" "true"
EndSection

Section "Extensions"
	Option       "Composite" "Enable"
	Option       "XVideo" "Enable"
EndSection

Section "Files"
	ModulePath   "/usr/local/lib/xorg/modules"
	FontPath     "/usr/local/lib/X11/fonts/misc/"
	FontPath     "/usr/local/lib/X11/fonts/TTF/"
	FontPath     "/usr/local/lib/X11/fonts/OTF"
	FontPath     "/usr/local/lib/X11/fonts/Type1/"
	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
	FontPath     "/usr/local/lib/X11/fonts/URW/"
	FontPath     "/usr/local/lib/X11/fonts/freefont/"
	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
EndSection

Section "Module"
	Load  "extmod"
	Load  "record"
	Load  "dbe"
	Load  "glx"
	Load  "dri"
	Load  "dri2"
	Load  "synaptics"
EndSection

#Section "ServerFlags"
#	Option      "AllowEmptyInput"
#EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

#Section "InputDevice"
#	Identifier  "Mouse0"
#	Driver      "mouse"
#	Option	    "Protocol" "auto"
#	Option	    "Device" "/dev/sysmouse"
#	Option	    "ZAxisMapping" "4 5 6 7"
#EndSection

Section "InputDevice"
	Identifier  "Synaptics_Touchpad"
	Driver      "synaptics"

	Option      "Device"                "/dev/psm0"
	Option      "Protocol"              "psm"

	Option      "LeftEdge"              "1400"
	Option      "RightEdge"             "5600"
	Option      "TopEdge"               "1400"
	Option      "BottomEdge"            "4700"

	Option      "FingerLow"             "25"
	Option      "FingerHigh"            "30"

	Option      "MaxTapTime"            "180"
	Option      "MaxTapMove"            "220"

	Option      "VertScrollDelta"       "100"
	Option      "HorizScrollDelta"      "100"

	Option      "MinSpeed"              "0.1"
	Option      "MaxSpeed"              "0.25"
	Option      "AccelFactor"           "0.0010"
	Option      "FastTaps"              "off"

	Option      "ScrollButtonRepeat"    "100"
	Option      "UpDownScrolling"       "on"
	Option      "UpDownRepeat"          "on"
	Option      "LeftRightScrolling"    "on"
	Option      "LeftRightRepeat"       "on"

	Option      "TapButton1"            "0"
	Option      "TapButton2"            "0"
	Option      "TapButton3"            "0"

	# "SHMConfig on" seems good works with synclient(1).  But this
	# options is insecure.  I recommended "off" as default.
	Option      "SHMConfig"             "on"

	# If you use circular touchpad, uncomment them.
	#Option          "CircularPad"           "on"
	#Option          "CircularScrolling"     "on"
	#Option          "CircScrollDelta"       "0.5"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
	Option       "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"           	# [<bool>]
        #Option     "HWcursor"           	# [<bool>]
        #Option     "NoAccel"            	# [<bool>]
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "Rotate"             	# [<str>]
        #Option     "VideoKey"           	# <i>
        #Option     "FlatPanel"          	# [<bool>]
        #Option     "FPDither"           	# [<bool>]
        #Option     "CrtcNumber"         	# <i>
        #Option     "FPScale"            	# [<bool>]
        #Option     "FPTweak"            	# <i>
        #Option     "DualHead"           	# [<bool>]
	Option      "UseEdidDpi" "false"
	Option      "DPI" "96 x 96"
	Identifier  "Card0"
	Driver      "nv"
	VendorName  "nVidia Corporation"
	BoardName   "Quadro NVS 140M"
	BusID       "PCI:1:0:0"
EndSection

Section "DRI"
	Mode 0666
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes     "1440x900"
	EndSubSection
EndSection

-------------- next part --------------
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
#	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Synaptics_Touchpad" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	Option         "DontZap" "Off"
	Option         "AIGLX" "true"
EndSection

Section "Extensions"
	Option       "Composite" "Enable"
	Option       "XVideo" "Enable"
EndSection

Section "Files"
	ModulePath   "/usr/local/lib/xorg/modules"
	FontPath     "/usr/local/lib/X11/fonts/misc/"
	FontPath     "/usr/local/lib/X11/fonts/TTF/"
	FontPath     "/usr/local/lib/X11/fonts/OTF"
	FontPath     "/usr/local/lib/X11/fonts/Type1/"
	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
	FontPath     "/usr/local/lib/X11/fonts/URW/"
	FontPath     "/usr/local/lib/X11/fonts/freefont/"
	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
EndSection

Section "Module"
	Load  "extmod"
	Load  "record"
	Load  "dbe"
	Load  "glx"
	Load  "dri"
	Load  "dri2"
	Load  "synaptics"
EndSection

#Section "ServerFlags"
#	Option      "AllowEmptyInput"
#EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

#Section "InputDevice"
#	Identifier  "Mouse0"
#	Driver      "mouse"
#	Option	    "Protocol" "auto"
#	Option	    "Device" "/dev/sysmouse"
#	Option	    "ZAxisMapping" "4 5 6 7"
#EndSection

Section "InputDevice"
	Identifier  "Synaptics_Touchpad"
	Driver      "synaptics"

	Option      "Device"                "/dev/psm0"
	Option      "Protocol"              "psm"

	Option      "LeftEdge"              "1400"
	Option      "RightEdge"             "5600"
	Option      "TopEdge"               "1400"
	Option      "BottomEdge"            "4700"

	Option      "FingerLow"             "25"
	Option      "FingerHigh"            "30"

	Option      "MaxTapTime"            "180"
	Option      "MaxTapMove"            "220"

	Option      "VertScrollDelta"       "100"
	Option      "HorizScrollDelta"      "100"

	Option      "MinSpeed"              "0.25"
	Option      "MaxSpeed"              "0.5"
	Option      "AccelFactor"           "0.0010"
	Option      "FastTaps"              "off"

	Option      "ScrollButtonRepeat"    "100"
	Option      "UpDownScrolling"       "on"
	Option      "UpDownRepeat"          "on"
	Option      "LeftRightScrolling"    "on"
	Option      "LeftRightRepeat"       "on"

	Option      "TapButton1"            "0"
	Option      "TapButton2"            "0"
	Option      "TapButton3"            "0"

	# "SHMConfig on" seems good works with synclient(1).  But this
	# options is insecure.  I recommended "off" as default.
	Option      "SHMConfig"             "on"

	# If you use circular touchpad, uncomment them.
	#Option          "CircularPad"           "on"
	#Option          "CircularScrolling"     "on"
	#Option          "CircScrollDelta"       "0.5"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
	Option       "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"           	# [<bool>]
        #Option     "HWcursor"           	# [<bool>]
        #Option     "NoAccel"            	# [<bool>]
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "Rotate"             	# [<str>]
        #Option     "VideoKey"           	# <i>
        #Option     "FlatPanel"          	# [<bool>]
        #Option     "FPDither"           	# [<bool>]
        #Option     "CrtcNumber"         	# <i>
        #Option     "FPScale"            	# [<bool>]
        #Option     "FPTweak"            	# <i>
        #Option     "DualHead"           	# [<bool>]
	Option      "UseEdidDpi" "false"
	Option      "DPI" "96 x 96"
	Identifier  "Card0"
	Driver      "nouveau"
	VendorName  "nVidia Corporation"
	BoardName   "Quadro NVS 140M"
	BusID       "PCI:1:0:0"
	Option      "AccelMethod" "EXA"
	Option      "EXANoComposite" "false"
	Option      "FBTexPercent" "50"
	Option      "MigrationHeuristic" "greedy"
	Option      "DRI" "true
EndSection

Section "DRI"
	Mode 0666
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes     "1440x900"
	EndSubSection
EndSection

-------------- next part --------------

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.1-RELEASE-p4 amd64 
Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4 FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
Build Date: 17 May 2009  09:21:33PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 17 21:37:41 2009
(++) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Synaptics_Touchpad"
(**) |-->Input Device "Keyboard0"
(**) Option "AllowEmptyInput"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	/usr/local/lib/X11/fonts/URW/,
	/usr/local/lib/X11/fonts/freefont/,
	/usr/local/lib/X11/fonts/TrueType/,
	/usr/local/lib/X11/fonts/bitstream-vera/,
	/usr/local/lib/X11/fonts/cyrillic/,
	/usr/local/lib/X11/fonts/encodings/,
	/usr/local/lib/X11/fonts/local/,
	/usr/local/lib/X11/fonts/util/,
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	built-ins
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(II) Loader magic: 0x3b20
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @ 0x????????/65536
(II) System resource ranges:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "synaptics"
(II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.1.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nv"
(II) Loading /usr/local/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 2.1.13
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
	GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
	Quadro FX 540, GeForce 6200, GeForce 6500,
	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
	GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
	GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
	GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
	GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
	GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
	GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
	GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
	Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
	GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
	GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
	Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
	Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
	GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
	GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
	GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
	GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
	GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
	Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
	GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
	GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
	GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
	GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
	GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
	GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
	GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
	GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
	GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro FX 3600M,
	GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
	GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
	GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
	GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS,
	GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M
(II) Primary Device is: PCI 01@00:00:0
(--) NV: Found NVIDIA Quadro NVS 140M at 01@00:00:0
(II) resource ranges after probing:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) NV(0): Initializing int10
(==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
(==) NV(0): Write-combining range (0xc0000,0x40000) was already clear
(II) NV(0): Primary V_BIOS segment is: 0xc000
(==) NV(0): Write-combining range (0x0,0x1000) was already clear
(--) NV(0): Console is VGA mode 0x3
(==) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(==) NV(0): Using hardware cursor
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(EE) NV(0): Failed to map MMIO registers: No such file or directory
(==) NV(0): Write-combining range (0x0,0x1000) was already clear
(II) UnloadModule: "nv"
(II) UnloadModule: "int10"
(II) Unloading /usr/local/lib/xorg/modules//libint10.so
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

From rnoland at FreeBSD.org  Wed May 27 15:56:12 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Wed May 27 15:56:31 2009
Subject: Problems with libpciaccess-0.10.6
In-Reply-To: <4A1D5FDD.9050306@irbisnet.com>
References: <4A1D5FDD.9050306@irbisnet.com>
Message-ID: <1243439705.2926.2387.camel@balrog.2hip.net>

On Wed, 2009-05-27 at 11:44 -0400, Andriy Bakay wrote:
> Hi X11 Team,
> 
> Recently I tried to upgrade to 'libpciaccess-0.10.6' port on my laptop: 
> ThinkPad T61, FreeBSD 7.1 amd64, nVidia Quadro NVS 140M. And my X 
> (xorg-server-1.6.0,1) server crashed during startup (see attached logs). 
> I tried 'xorg-server-1.6.1' and two different nVidia drivers 'nv' and 
> 'nouveau' same crash, but with different log entries. After I downgrade 
> to 'libpciaccess-0.10.5_6' port both drivers working fine. I attached 
> the X server logs and configs for both nVidia drivers:

Hrm, I really didn't think that much changed with 0.10.6.  Any chance
you can get a backtrace from the X server?

robert.

> nv:      Xorg.0.nv.log, xorg.nv.conf
> nouveau: Xorg.0.nouveau.log, xorg.nouveau.conf
> 
> Please, advise.
> 
> Thanks,
> Andriy
> plain text document attachment (Xorg.0.nouveau.log)
> X.Org X Server 1.6.0
> Release Date: 2009-2-25
> X Protocol Version 11, Revision 0
> Build Operating System: FreeBSD 7.0-RELEASE amd64 
> Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4 FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
> Build Date: 12 April 2009  03:12:50PM
>  
> 	Before reporting problems, check http://wiki.x.org
> 	to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> 	(++) from command line, (!!) notice, (II) informational,
> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 23 21:47:12 2009
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "X.org Configured"
> (**) |-->Screen "Screen0" (0)
> (**) |   |-->Monitor "Monitor0"
> (**) |   |-->Device "Card0"
> (**) |-->Input Device "Synaptics_Touchpad"
> (**) |-->Input Device "Keyboard0"
> (**) Option "DontZap" "Off"
> (**) Option "AIGLX" "true"
> (==) Automatically adding devices
> (==) Automatically enabling devices
> (**) FontPath set to:
> 	/usr/local/lib/X11/fonts/misc/,
> 	/usr/local/lib/X11/fonts/TTF/,
> 	/usr/local/lib/X11/fonts/OTF,
> 	/usr/local/lib/X11/fonts/Type1/,
> 	/usr/local/lib/X11/fonts/100dpi/,
> 	/usr/local/lib/X11/fonts/75dpi/,
> 	/usr/local/lib/X11/fonts/URW/,
> 	/usr/local/lib/X11/fonts/freefont/,
> 	/usr/local/lib/X11/fonts/TrueType/,
> 	/usr/local/lib/X11/fonts/bitstream-vera/,
> 	/usr/local/lib/X11/fonts/cyrillic/,
> 	/usr/local/lib/X11/fonts/misc/,
> 	/usr/local/lib/X11/fonts/TTF/,
> 	/usr/local/lib/X11/fonts/OTF,
> 	/usr/local/lib/X11/fonts/Type1/,
> 	/usr/local/lib/X11/fonts/100dpi/,
> 	/usr/local/lib/X11/fonts/75dpi/,
> 	built-ins
> (**) ModulePath set to "/usr/local/lib/xorg/modules"
> (**) Extension "Composite" is enabled
> (**) Extension "XVideo" is enabled
> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
> (WW) Disabling Keyboard0
> (II) Loader magic: 0xb20
> (II) Module ABI versions:
> 	X.Org ANSI C Emulation: 0.4
> 	X.Org Video Driver: 5.0
> 	X.Org XInput driver : 4.0
> 	X.Org Server Extension : 2.0
> (II) Loader running on freebsd
> (--) Using syscons driver with X support (version 2.0)
> (--) using VT number 9
> 
> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @ 0x????????/65536
> (II) System resource ranges:
> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
> (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
> (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
> (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
> (II) "record" will be loaded. This was enabled by default and also specified in the config file.
> (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
> (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
> (II) LoadModule: "extmod"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	Module class: X.Org Server Extension
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "record"
> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
> (II) Module record: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.13.0
> 	Module class: X.Org Server Extension
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension RECORD
> (II) LoadModule: "dbe"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	Module class: X.Org Server Extension
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "glx"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
> (II) Module glx: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	ABI class: X.Org Server Extension, version 2.0
> (**) AIGLX enabled
> (II) Loading extension GLX
> (II) LoadModule: "dri"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
> (II) Module dri: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "dri2"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
> (II) Module dri2: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DRI2
> (II) LoadModule: "synaptics"
> (II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
> (II) Module synaptics: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 0.99.3
> 	Module class: X.Org XInput Driver
> 	ABI class: X.Org XInput driver, version 4.0
> (II) LoadModule: "nouveau"
> (II) Loading /usr/local/lib/xorg/modules/drivers//nouveau_drv.so
> (II) Module nouveau: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 0.0.10
> 	Module class: X.Org Video Driver
> 	ABI class: X.Org Video Driver, version 5.0
> (II) LoadModule: "synaptics"
> (II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
> (II) NOUVEAU driver 20090514.9656762
> (II) NOUVEAU driver for NVIDIA chipset families :
> 	RIVA TNT    (NV04)
> 	RIVA TNT2   (NV05)
> 	GeForce 256 (NV10)
> 	GeForce 2   (NV11, NV15)
> 	GeForce 4MX (NV17, NV18)
> 	GeForce 3   (NV20)
> 	GeForce 4Ti (NV25, NV28)
> 	GeForce FX  (NV3x)
> 	GeForce 6   (NV4x)
> 	GeForce 7   (G7x)
> 	GeForce 8   (G8x)
> (II) Primary Device is: PCI 01@00:00:0
> 
> Fatal server error:
> Caught signal 11.  Server aborting
> 
> 
> Please consult the The X.Org Foundation support 
> 	 at http://wiki.x.org
>  for help. 
> Please also check the log file at "/var/log/Xorg.0.log" for additional information.
> 
> plain text document attachment (xorg.nv.conf)
> Section "ServerLayout"
> 	Identifier     "X.org Configured"
> 	Screen      0  "Screen0" 0 0
> #	InputDevice    "Mouse0" "CorePointer"
> 	InputDevice    "Synaptics_Touchpad" "CorePointer"
> 	InputDevice    "Keyboard0" "CoreKeyboard"
> 	Option         "DontZap" "Off"
> 	Option         "AIGLX" "true"
> EndSection
> 
> Section "Extensions"
> 	Option       "Composite" "Enable"
> 	Option       "XVideo" "Enable"
> EndSection
> 
> Section "Files"
> 	ModulePath   "/usr/local/lib/xorg/modules"
> 	FontPath     "/usr/local/lib/X11/fonts/misc/"
> 	FontPath     "/usr/local/lib/X11/fonts/TTF/"
> 	FontPath     "/usr/local/lib/X11/fonts/OTF"
> 	FontPath     "/usr/local/lib/X11/fonts/Type1/"
> 	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
> 	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
> 	FontPath     "/usr/local/lib/X11/fonts/URW/"
> 	FontPath     "/usr/local/lib/X11/fonts/freefont/"
> 	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
> 	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
> 	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
> EndSection
> 
> Section "Module"
> 	Load  "extmod"
> 	Load  "record"
> 	Load  "dbe"
> 	Load  "glx"
> 	Load  "dri"
> 	Load  "dri2"
> 	Load  "synaptics"
> EndSection
> 
> #Section "ServerFlags"
> #	Option      "AllowEmptyInput"
> #EndSection
> 
> Section "InputDevice"
> 	Identifier  "Keyboard0"
> 	Driver      "kbd"
> EndSection
> 
> #Section "InputDevice"
> #	Identifier  "Mouse0"
> #	Driver      "mouse"
> #	Option	    "Protocol" "auto"
> #	Option	    "Device" "/dev/sysmouse"
> #	Option	    "ZAxisMapping" "4 5 6 7"
> #EndSection
> 
> Section "InputDevice"
> 	Identifier  "Synaptics_Touchpad"
> 	Driver      "synaptics"
> 
> 	Option      "Device"                "/dev/psm0"
> 	Option      "Protocol"              "psm"
> 
> 	Option      "LeftEdge"              "1400"
> 	Option      "RightEdge"             "5600"
> 	Option      "TopEdge"               "1400"
> 	Option      "BottomEdge"            "4700"
> 
> 	Option      "FingerLow"             "25"
> 	Option      "FingerHigh"            "30"
> 
> 	Option      "MaxTapTime"            "180"
> 	Option      "MaxTapMove"            "220"
> 
> 	Option      "VertScrollDelta"       "100"
> 	Option      "HorizScrollDelta"      "100"
> 
> 	Option      "MinSpeed"              "0.1"
> 	Option      "MaxSpeed"              "0.25"
> 	Option      "AccelFactor"           "0.0010"
> 	Option      "FastTaps"              "off"
> 
> 	Option      "ScrollButtonRepeat"    "100"
> 	Option      "UpDownScrolling"       "on"
> 	Option      "UpDownRepeat"          "on"
> 	Option      "LeftRightScrolling"    "on"
> 	Option      "LeftRightRepeat"       "on"
> 
> 	Option      "TapButton1"            "0"
> 	Option      "TapButton2"            "0"
> 	Option      "TapButton3"            "0"
> 
> 	# "SHMConfig on" seems good works with synclient(1).  But this
> 	# options is insecure.  I recommended "off" as default.
> 	Option      "SHMConfig"             "on"
> 
> 	# If you use circular touchpad, uncomment them.
> 	#Option          "CircularPad"           "on"
> 	#Option          "CircularScrolling"     "on"
> 	#Option          "CircScrollDelta"       "0.5"
> EndSection
> 
> Section "Monitor"
> 	Identifier   "Monitor0"
> 	VendorName   "Monitor Vendor"
> 	ModelName    "Monitor Model"
> 	Option       "DPMS"
> EndSection
> 
> Section "Device"
>         ### Available Driver options are:-
>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>         ### [arg]: arg optional
>         #Option     "SWcursor"           	# [<bool>]
>         #Option     "HWcursor"           	# [<bool>]
>         #Option     "NoAccel"            	# [<bool>]
>         #Option     "ShadowFB"           	# [<bool>]
>         #Option     "UseFBDev"           	# [<bool>]
>         #Option     "Rotate"             	# [<str>]
>         #Option     "VideoKey"           	# <i>
>         #Option     "FlatPanel"          	# [<bool>]
>         #Option     "FPDither"           	# [<bool>]
>         #Option     "CrtcNumber"         	# <i>
>         #Option     "FPScale"            	# [<bool>]
>         #Option     "FPTweak"            	# <i>
>         #Option     "DualHead"           	# [<bool>]
> 	Option      "UseEdidDpi" "false"
> 	Option      "DPI" "96 x 96"
> 	Identifier  "Card0"
> 	Driver      "nv"
> 	VendorName  "nVidia Corporation"
> 	BoardName   "Quadro NVS 140M"
> 	BusID       "PCI:1:0:0"
> EndSection
> 
> Section "DRI"
> 	Mode 0666
> EndSection
> 
> Section "Screen"
> 	Identifier "Screen0"
> 	Device     "Card0"
> 	Monitor    "Monitor0"
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     1
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     4
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     8
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     15
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     16
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     24
> 		Modes     "1440x900"
> 	EndSubSection
> EndSection
> 
> plain text document attachment (xorg.nouveau.conf)
> Section "ServerLayout"
> 	Identifier     "X.org Configured"
> 	Screen      0  "Screen0" 0 0
> #	InputDevice    "Mouse0" "CorePointer"
> 	InputDevice    "Synaptics_Touchpad" "CorePointer"
> 	InputDevice    "Keyboard0" "CoreKeyboard"
> 	Option         "DontZap" "Off"
> 	Option         "AIGLX" "true"
> EndSection
> 
> Section "Extensions"
> 	Option       "Composite" "Enable"
> 	Option       "XVideo" "Enable"
> EndSection
> 
> Section "Files"
> 	ModulePath   "/usr/local/lib/xorg/modules"
> 	FontPath     "/usr/local/lib/X11/fonts/misc/"
> 	FontPath     "/usr/local/lib/X11/fonts/TTF/"
> 	FontPath     "/usr/local/lib/X11/fonts/OTF"
> 	FontPath     "/usr/local/lib/X11/fonts/Type1/"
> 	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
> 	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
> 	FontPath     "/usr/local/lib/X11/fonts/URW/"
> 	FontPath     "/usr/local/lib/X11/fonts/freefont/"
> 	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
> 	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
> 	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
> EndSection
> 
> Section "Module"
> 	Load  "extmod"
> 	Load  "record"
> 	Load  "dbe"
> 	Load  "glx"
> 	Load  "dri"
> 	Load  "dri2"
> 	Load  "synaptics"
> EndSection
> 
> #Section "ServerFlags"
> #	Option      "AllowEmptyInput"
> #EndSection
> 
> Section "InputDevice"
> 	Identifier  "Keyboard0"
> 	Driver      "kbd"
> EndSection
> 
> #Section "InputDevice"
> #	Identifier  "Mouse0"
> #	Driver      "mouse"
> #	Option	    "Protocol" "auto"
> #	Option	    "Device" "/dev/sysmouse"
> #	Option	    "ZAxisMapping" "4 5 6 7"
> #EndSection
> 
> Section "InputDevice"
> 	Identifier  "Synaptics_Touchpad"
> 	Driver      "synaptics"
> 
> 	Option      "Device"                "/dev/psm0"
> 	Option      "Protocol"              "psm"
> 
> 	Option      "LeftEdge"              "1400"
> 	Option      "RightEdge"             "5600"
> 	Option      "TopEdge"               "1400"
> 	Option      "BottomEdge"            "4700"
> 
> 	Option      "FingerLow"             "25"
> 	Option      "FingerHigh"            "30"
> 
> 	Option      "MaxTapTime"            "180"
> 	Option      "MaxTapMove"            "220"
> 
> 	Option      "VertScrollDelta"       "100"
> 	Option      "HorizScrollDelta"      "100"
> 
> 	Option      "MinSpeed"              "0.25"
> 	Option      "MaxSpeed"              "0.5"
> 	Option      "AccelFactor"           "0.0010"
> 	Option      "FastTaps"              "off"
> 
> 	Option      "ScrollButtonRepeat"    "100"
> 	Option      "UpDownScrolling"       "on"
> 	Option      "UpDownRepeat"          "on"
> 	Option      "LeftRightScrolling"    "on"
> 	Option      "LeftRightRepeat"       "on"
> 
> 	Option      "TapButton1"            "0"
> 	Option      "TapButton2"            "0"
> 	Option      "TapButton3"            "0"
> 
> 	# "SHMConfig on" seems good works with synclient(1).  But this
> 	# options is insecure.  I recommended "off" as default.
> 	Option      "SHMConfig"             "on"
> 
> 	# If you use circular touchpad, uncomment them.
> 	#Option          "CircularPad"           "on"
> 	#Option          "CircularScrolling"     "on"
> 	#Option          "CircScrollDelta"       "0.5"
> EndSection
> 
> Section "Monitor"
> 	Identifier   "Monitor0"
> 	VendorName   "Monitor Vendor"
> 	ModelName    "Monitor Model"
> 	Option       "DPMS"
> EndSection
> 
> Section "Device"
>         ### Available Driver options are:-
>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>         ### [arg]: arg optional
>         #Option     "SWcursor"           	# [<bool>]
>         #Option     "HWcursor"           	# [<bool>]
>         #Option     "NoAccel"            	# [<bool>]
>         #Option     "ShadowFB"           	# [<bool>]
>         #Option     "UseFBDev"           	# [<bool>]
>         #Option     "Rotate"             	# [<str>]
>         #Option     "VideoKey"           	# <i>
>         #Option     "FlatPanel"          	# [<bool>]
>         #Option     "FPDither"           	# [<bool>]
>         #Option     "CrtcNumber"         	# <i>
>         #Option     "FPScale"            	# [<bool>]
>         #Option     "FPTweak"            	# <i>
>         #Option     "DualHead"           	# [<bool>]
> 	Option      "UseEdidDpi" "false"
> 	Option      "DPI" "96 x 96"
> 	Identifier  "Card0"
> 	Driver      "nouveau"
> 	VendorName  "nVidia Corporation"
> 	BoardName   "Quadro NVS 140M"
> 	BusID       "PCI:1:0:0"
> 	Option      "AccelMethod" "EXA"
> 	Option      "EXANoComposite" "false"
> 	Option      "FBTexPercent" "50"
> 	Option      "MigrationHeuristic" "greedy"
> 	Option      "DRI" "true
> EndSection
> 
> Section "DRI"
> 	Mode 0666
> EndSection
> 
> Section "Screen"
> 	Identifier "Screen0"
> 	Device     "Card0"
> 	Monitor    "Monitor0"
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     1
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     4
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     8
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     15
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     16
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     24
> 		Modes     "1440x900"
> 	EndSubSection
> EndSection
> 
> plain text document attachment (Xorg.0.nv.log)
> X.Org X Server 1.6.0
> Release Date: 2009-2-25
> X Protocol Version 11, Revision 0
> Build Operating System: FreeBSD 7.1-RELEASE-p4 amd64 
> Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4 FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
> Build Date: 17 May 2009  09:21:33PM
>  
> 	Before reporting problems, check http://wiki.x.org
> 	to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> 	(++) from command line, (!!) notice, (II) informational,
> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 17 21:37:41 2009
> (++) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "X.org Configured"
> (**) |-->Screen "Screen0" (0)
> (**) |   |-->Monitor "Monitor0"
> (**) |   |-->Device "Card0"
> (**) |-->Input Device "Synaptics_Touchpad"
> (**) |-->Input Device "Keyboard0"
> (**) Option "AllowEmptyInput"
> (==) Automatically adding devices
> (==) Automatically enabling devices
> (**) FontPath set to:
> 	/usr/local/lib/X11/fonts/misc/,
> 	/usr/local/lib/X11/fonts/TTF/,
> 	/usr/local/lib/X11/fonts/OTF,
> 	/usr/local/lib/X11/fonts/Type1/,
> 	/usr/local/lib/X11/fonts/100dpi/,
> 	/usr/local/lib/X11/fonts/75dpi/,
> 	/usr/local/lib/X11/fonts/URW/,
> 	/usr/local/lib/X11/fonts/freefont/,
> 	/usr/local/lib/X11/fonts/TrueType/,
> 	/usr/local/lib/X11/fonts/bitstream-vera/,
> 	/usr/local/lib/X11/fonts/cyrillic/,
> 	/usr/local/lib/X11/fonts/encodings/,
> 	/usr/local/lib/X11/fonts/local/,
> 	/usr/local/lib/X11/fonts/util/,
> 	/usr/local/lib/X11/fonts/misc/,
> 	/usr/local/lib/X11/fonts/TTF/,
> 	/usr/local/lib/X11/fonts/OTF,
> 	/usr/local/lib/X11/fonts/Type1/,
> 	/usr/local/lib/X11/fonts/100dpi/,
> 	/usr/local/lib/X11/fonts/75dpi/,
> 	built-ins
> (**) ModulePath set to "/usr/local/lib/xorg/modules"
> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
> (WW) Disabling Keyboard0
> (II) Loader magic: 0x3b20
> (II) Module ABI versions:
> 	X.Org ANSI C Emulation: 0.4
> 	X.Org Video Driver: 5.0
> 	X.Org XInput driver : 4.0
> 	X.Org Server Extension : 2.0
> (II) Loader running on freebsd
> (--) Using syscons driver with X support (version 2.0)
> (--) using VT number 9
> 
> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @ 0x????????/65536
> (II) System resource ranges:
> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
> (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
> (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
> (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
> (II) "record" will be loaded. This was enabled by default and also specified in the config file.
> (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
> (II) "dri2" will be loaded by default.
> (II) LoadModule: "extmod"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	Module class: X.Org Server Extension
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "record"
> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
> (II) Module record: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.13.0
> 	Module class: X.Org Server Extension
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension RECORD
> (II) LoadModule: "dbe"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	Module class: X.Org Server Extension
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "glx"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
> (II) Module glx: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	ABI class: X.Org Server Extension, version 2.0
> (==) AIGLX disabled
> (II) Loading extension GLX
> (II) LoadModule: "xtrap"
> (WW) Warning, couldn't open module xtrap
> (II) UnloadModule: "xtrap"
> (EE) Failed to load module "xtrap" (module does not exist, 0)
> (II) LoadModule: "dri"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
> (II) Module dri: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "freetype"
> (WW) Warning, couldn't open module freetype
> (II) UnloadModule: "freetype"
> (EE) Failed to load module "freetype" (module does not exist, 0)
> (II) LoadModule: "type1"
> (WW) Warning, couldn't open module type1
> (II) UnloadModule: "type1"
> (EE) Failed to load module "type1" (module does not exist, 0)
> (II) LoadModule: "synaptics"
> (II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
> (II) Module synaptics: vendor="X.Org Foundation"
> 	compiled for 1.6.1, module version = 1.1.0
> 	Module class: X.Org XInput Driver
> 	ABI class: X.Org XInput driver, version 4.0
> (II) LoadModule: "dri2"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
> (II) Module dri2: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DRI2
> (II) LoadModule: "nv"
> (II) Loading /usr/local/lib/xorg/modules/drivers//nv_drv.so
> (II) Module nv: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 2.1.13
> 	Module class: X.Org Video Driver
> 	ABI class: X.Org Video Driver, version 5.0
> (II) LoadModule: "synaptics"
> (II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
> (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
> 	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
> 	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
> 	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
> 	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
> 	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
> 	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
> 	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
> 	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
> 	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
> 	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
> 	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
> 	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
> 	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
> 	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
> 	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
> 	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
> 	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
> 	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
> 	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
> 	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
> 	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
> 	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
> 	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
> 	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
> 	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
> 	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
> 	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
> 	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
> 	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
> 	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
> 	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
> 	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
> 	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
> 	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
> 	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
> 	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
> 	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
> 	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
> 	GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
> 	Quadro FX 540, GeForce 6200, GeForce 6500,
> 	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
> 	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
> 	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
> 	GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
> 	GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
> 	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
> 	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
> 	GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
> 	GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
> 	GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
> 	GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
> 	GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
> 	Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
> 	GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
> 	GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
> 	Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
> 	Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
> 	GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
> 	GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
> 	GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
> 	GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
> 	GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
> 	Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
> 	GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
> 	GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
> 	GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
> 	GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
> 	GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
> 	GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
> 	GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
> 	GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
> 	GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro FX 3600M,
> 	GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
> 	GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
> 	GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
> 	GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS,
> 	GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M
> (II) Primary Device is: PCI 01@00:00:0
> (--) NV: Found NVIDIA Quadro NVS 140M at 01@00:00:0
> (II) resource ranges after probing:
> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Loading /usr/local/lib/xorg/modules//libint10.so
> (II) Module int10: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	ABI class: X.Org Video Driver, version 5.0
> (II) NV(0): Initializing int10
> (==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
> (==) NV(0): Write-combining range (0xc0000,0x40000) was already clear
> (II) NV(0): Primary V_BIOS segment is: 0xc000
> (==) NV(0): Write-combining range (0x0,0x1000) was already clear
> (--) NV(0): Console is VGA mode 0x3
> (==) NV(0): Depth 24, (--) framebuffer bpp 32
> (==) NV(0): RGB weight 888
> (==) NV(0): Default visual is TrueColor
> (==) NV(0): Using hardware cursor
> (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
> (EE) NV(0): Failed to map MMIO registers: No such file or directory
> (==) NV(0): Write-combining range (0x0,0x1000) was already clear
> (II) UnloadModule: "nv"
> (II) UnloadModule: "int10"
> (II) Unloading /usr/local/lib/xorg/modules//libint10.so
> (EE) Screen(s) found, but none have a usable configuration.
> 
> Fatal server error:
> no screens found
> 
> Please consult the The X.Org Foundation support 
> 	 at http://wiki.x.org
>  for help. 
> Please also check the log file at "/var/log/Xorg.0.log" for additional information.
> 
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090527/84b62f97/attachment.pgp
From rnoland at FreeBSD.org  Wed May 27 15:56:12 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Wed May 27 15:56:32 2009
Subject: Problems with libpciaccess-0.10.6
In-Reply-To: <4A1D5FDD.9050306@irbisnet.com>
References: <4A1D5FDD.9050306@irbisnet.com>
Message-ID: <1243439705.2926.2387.camel@balrog.2hip.net>

On Wed, 2009-05-27 at 11:44 -0400, Andriy Bakay wrote:
> Hi X11 Team,
> 
> Recently I tried to upgrade to 'libpciaccess-0.10.6' port on my laptop: 
> ThinkPad T61, FreeBSD 7.1 amd64, nVidia Quadro NVS 140M. And my X 
> (xorg-server-1.6.0,1) server crashed during startup (see attached logs). 
> I tried 'xorg-server-1.6.1' and two different nVidia drivers 'nv' and 
> 'nouveau' same crash, but with different log entries. After I downgrade 
> to 'libpciaccess-0.10.5_6' port both drivers working fine. I attached 
> the X server logs and configs for both nVidia drivers:

Hrm, I really didn't think that much changed with 0.10.6.  Any chance
you can get a backtrace from the X server?

robert.

> nv:      Xorg.0.nv.log, xorg.nv.conf
> nouveau: Xorg.0.nouveau.log, xorg.nouveau.conf
> 
> Please, advise.
> 
> Thanks,
> Andriy
> plain text document attachment (Xorg.0.nouveau.log)
> X.Org X Server 1.6.0
> Release Date: 2009-2-25
> X Protocol Version 11, Revision 0
> Build Operating System: FreeBSD 7.0-RELEASE amd64 
> Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4 FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
> Build Date: 12 April 2009  03:12:50PM
>  
> 	Before reporting problems, check http://wiki.x.org
> 	to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> 	(++) from command line, (!!) notice, (II) informational,
> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 23 21:47:12 2009
> (==) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "X.org Configured"
> (**) |-->Screen "Screen0" (0)
> (**) |   |-->Monitor "Monitor0"
> (**) |   |-->Device "Card0"
> (**) |-->Input Device "Synaptics_Touchpad"
> (**) |-->Input Device "Keyboard0"
> (**) Option "DontZap" "Off"
> (**) Option "AIGLX" "true"
> (==) Automatically adding devices
> (==) Automatically enabling devices
> (**) FontPath set to:
> 	/usr/local/lib/X11/fonts/misc/,
> 	/usr/local/lib/X11/fonts/TTF/,
> 	/usr/local/lib/X11/fonts/OTF,
> 	/usr/local/lib/X11/fonts/Type1/,
> 	/usr/local/lib/X11/fonts/100dpi/,
> 	/usr/local/lib/X11/fonts/75dpi/,
> 	/usr/local/lib/X11/fonts/URW/,
> 	/usr/local/lib/X11/fonts/freefont/,
> 	/usr/local/lib/X11/fonts/TrueType/,
> 	/usr/local/lib/X11/fonts/bitstream-vera/,
> 	/usr/local/lib/X11/fonts/cyrillic/,
> 	/usr/local/lib/X11/fonts/misc/,
> 	/usr/local/lib/X11/fonts/TTF/,
> 	/usr/local/lib/X11/fonts/OTF,
> 	/usr/local/lib/X11/fonts/Type1/,
> 	/usr/local/lib/X11/fonts/100dpi/,
> 	/usr/local/lib/X11/fonts/75dpi/,
> 	built-ins
> (**) ModulePath set to "/usr/local/lib/xorg/modules"
> (**) Extension "Composite" is enabled
> (**) Extension "XVideo" is enabled
> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
> (WW) Disabling Keyboard0
> (II) Loader magic: 0xb20
> (II) Module ABI versions:
> 	X.Org ANSI C Emulation: 0.4
> 	X.Org Video Driver: 5.0
> 	X.Org XInput driver : 4.0
> 	X.Org Server Extension : 2.0
> (II) Loader running on freebsd
> (--) Using syscons driver with X support (version 2.0)
> (--) using VT number 9
> 
> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @ 0x????????/65536
> (II) System resource ranges:
> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
> (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
> (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
> (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
> (II) "record" will be loaded. This was enabled by default and also specified in the config file.
> (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
> (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
> (II) LoadModule: "extmod"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	Module class: X.Org Server Extension
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "record"
> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
> (II) Module record: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.13.0
> 	Module class: X.Org Server Extension
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension RECORD
> (II) LoadModule: "dbe"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	Module class: X.Org Server Extension
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "glx"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
> (II) Module glx: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	ABI class: X.Org Server Extension, version 2.0
> (**) AIGLX enabled
> (II) Loading extension GLX
> (II) LoadModule: "dri"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
> (II) Module dri: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "dri2"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
> (II) Module dri2: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DRI2
> (II) LoadModule: "synaptics"
> (II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
> (II) Module synaptics: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 0.99.3
> 	Module class: X.Org XInput Driver
> 	ABI class: X.Org XInput driver, version 4.0
> (II) LoadModule: "nouveau"
> (II) Loading /usr/local/lib/xorg/modules/drivers//nouveau_drv.so
> (II) Module nouveau: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 0.0.10
> 	Module class: X.Org Video Driver
> 	ABI class: X.Org Video Driver, version 5.0
> (II) LoadModule: "synaptics"
> (II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
> (II) NOUVEAU driver 20090514.9656762
> (II) NOUVEAU driver for NVIDIA chipset families :
> 	RIVA TNT    (NV04)
> 	RIVA TNT2   (NV05)
> 	GeForce 256 (NV10)
> 	GeForce 2   (NV11, NV15)
> 	GeForce 4MX (NV17, NV18)
> 	GeForce 3   (NV20)
> 	GeForce 4Ti (NV25, NV28)
> 	GeForce FX  (NV3x)
> 	GeForce 6   (NV4x)
> 	GeForce 7   (G7x)
> 	GeForce 8   (G8x)
> (II) Primary Device is: PCI 01@00:00:0
> 
> Fatal server error:
> Caught signal 11.  Server aborting
> 
> 
> Please consult the The X.Org Foundation support 
> 	 at http://wiki.x.org
>  for help. 
> Please also check the log file at "/var/log/Xorg.0.log" for additional information.
> 
> plain text document attachment (xorg.nv.conf)
> Section "ServerLayout"
> 	Identifier     "X.org Configured"
> 	Screen      0  "Screen0" 0 0
> #	InputDevice    "Mouse0" "CorePointer"
> 	InputDevice    "Synaptics_Touchpad" "CorePointer"
> 	InputDevice    "Keyboard0" "CoreKeyboard"
> 	Option         "DontZap" "Off"
> 	Option         "AIGLX" "true"
> EndSection
> 
> Section "Extensions"
> 	Option       "Composite" "Enable"
> 	Option       "XVideo" "Enable"
> EndSection
> 
> Section "Files"
> 	ModulePath   "/usr/local/lib/xorg/modules"
> 	FontPath     "/usr/local/lib/X11/fonts/misc/"
> 	FontPath     "/usr/local/lib/X11/fonts/TTF/"
> 	FontPath     "/usr/local/lib/X11/fonts/OTF"
> 	FontPath     "/usr/local/lib/X11/fonts/Type1/"
> 	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
> 	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
> 	FontPath     "/usr/local/lib/X11/fonts/URW/"
> 	FontPath     "/usr/local/lib/X11/fonts/freefont/"
> 	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
> 	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
> 	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
> EndSection
> 
> Section "Module"
> 	Load  "extmod"
> 	Load  "record"
> 	Load  "dbe"
> 	Load  "glx"
> 	Load  "dri"
> 	Load  "dri2"
> 	Load  "synaptics"
> EndSection
> 
> #Section "ServerFlags"
> #	Option      "AllowEmptyInput"
> #EndSection
> 
> Section "InputDevice"
> 	Identifier  "Keyboard0"
> 	Driver      "kbd"
> EndSection
> 
> #Section "InputDevice"
> #	Identifier  "Mouse0"
> #	Driver      "mouse"
> #	Option	    "Protocol" "auto"
> #	Option	    "Device" "/dev/sysmouse"
> #	Option	    "ZAxisMapping" "4 5 6 7"
> #EndSection
> 
> Section "InputDevice"
> 	Identifier  "Synaptics_Touchpad"
> 	Driver      "synaptics"
> 
> 	Option      "Device"                "/dev/psm0"
> 	Option      "Protocol"              "psm"
> 
> 	Option      "LeftEdge"              "1400"
> 	Option      "RightEdge"             "5600"
> 	Option      "TopEdge"               "1400"
> 	Option      "BottomEdge"            "4700"
> 
> 	Option      "FingerLow"             "25"
> 	Option      "FingerHigh"            "30"
> 
> 	Option      "MaxTapTime"            "180"
> 	Option      "MaxTapMove"            "220"
> 
> 	Option      "VertScrollDelta"       "100"
> 	Option      "HorizScrollDelta"      "100"
> 
> 	Option      "MinSpeed"              "0.1"
> 	Option      "MaxSpeed"              "0.25"
> 	Option      "AccelFactor"           "0.0010"
> 	Option      "FastTaps"              "off"
> 
> 	Option      "ScrollButtonRepeat"    "100"
> 	Option      "UpDownScrolling"       "on"
> 	Option      "UpDownRepeat"          "on"
> 	Option      "LeftRightScrolling"    "on"
> 	Option      "LeftRightRepeat"       "on"
> 
> 	Option      "TapButton1"            "0"
> 	Option      "TapButton2"            "0"
> 	Option      "TapButton3"            "0"
> 
> 	# "SHMConfig on" seems good works with synclient(1).  But this
> 	# options is insecure.  I recommended "off" as default.
> 	Option      "SHMConfig"             "on"
> 
> 	# If you use circular touchpad, uncomment them.
> 	#Option          "CircularPad"           "on"
> 	#Option          "CircularScrolling"     "on"
> 	#Option          "CircScrollDelta"       "0.5"
> EndSection
> 
> Section "Monitor"
> 	Identifier   "Monitor0"
> 	VendorName   "Monitor Vendor"
> 	ModelName    "Monitor Model"
> 	Option       "DPMS"
> EndSection
> 
> Section "Device"
>         ### Available Driver options are:-
>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>         ### [arg]: arg optional
>         #Option     "SWcursor"           	# [<bool>]
>         #Option     "HWcursor"           	# [<bool>]
>         #Option     "NoAccel"            	# [<bool>]
>         #Option     "ShadowFB"           	# [<bool>]
>         #Option     "UseFBDev"           	# [<bool>]
>         #Option     "Rotate"             	# [<str>]
>         #Option     "VideoKey"           	# <i>
>         #Option     "FlatPanel"          	# [<bool>]
>         #Option     "FPDither"           	# [<bool>]
>         #Option     "CrtcNumber"         	# <i>
>         #Option     "FPScale"            	# [<bool>]
>         #Option     "FPTweak"            	# <i>
>         #Option     "DualHead"           	# [<bool>]
> 	Option      "UseEdidDpi" "false"
> 	Option      "DPI" "96 x 96"
> 	Identifier  "Card0"
> 	Driver      "nv"
> 	VendorName  "nVidia Corporation"
> 	BoardName   "Quadro NVS 140M"
> 	BusID       "PCI:1:0:0"
> EndSection
> 
> Section "DRI"
> 	Mode 0666
> EndSection
> 
> Section "Screen"
> 	Identifier "Screen0"
> 	Device     "Card0"
> 	Monitor    "Monitor0"
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     1
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     4
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     8
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     15
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     16
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     24
> 		Modes     "1440x900"
> 	EndSubSection
> EndSection
> 
> plain text document attachment (xorg.nouveau.conf)
> Section "ServerLayout"
> 	Identifier     "X.org Configured"
> 	Screen      0  "Screen0" 0 0
> #	InputDevice    "Mouse0" "CorePointer"
> 	InputDevice    "Synaptics_Touchpad" "CorePointer"
> 	InputDevice    "Keyboard0" "CoreKeyboard"
> 	Option         "DontZap" "Off"
> 	Option         "AIGLX" "true"
> EndSection
> 
> Section "Extensions"
> 	Option       "Composite" "Enable"
> 	Option       "XVideo" "Enable"
> EndSection
> 
> Section "Files"
> 	ModulePath   "/usr/local/lib/xorg/modules"
> 	FontPath     "/usr/local/lib/X11/fonts/misc/"
> 	FontPath     "/usr/local/lib/X11/fonts/TTF/"
> 	FontPath     "/usr/local/lib/X11/fonts/OTF"
> 	FontPath     "/usr/local/lib/X11/fonts/Type1/"
> 	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
> 	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
> 	FontPath     "/usr/local/lib/X11/fonts/URW/"
> 	FontPath     "/usr/local/lib/X11/fonts/freefont/"
> 	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
> 	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
> 	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
> EndSection
> 
> Section "Module"
> 	Load  "extmod"
> 	Load  "record"
> 	Load  "dbe"
> 	Load  "glx"
> 	Load  "dri"
> 	Load  "dri2"
> 	Load  "synaptics"
> EndSection
> 
> #Section "ServerFlags"
> #	Option      "AllowEmptyInput"
> #EndSection
> 
> Section "InputDevice"
> 	Identifier  "Keyboard0"
> 	Driver      "kbd"
> EndSection
> 
> #Section "InputDevice"
> #	Identifier  "Mouse0"
> #	Driver      "mouse"
> #	Option	    "Protocol" "auto"
> #	Option	    "Device" "/dev/sysmouse"
> #	Option	    "ZAxisMapping" "4 5 6 7"
> #EndSection
> 
> Section "InputDevice"
> 	Identifier  "Synaptics_Touchpad"
> 	Driver      "synaptics"
> 
> 	Option      "Device"                "/dev/psm0"
> 	Option      "Protocol"              "psm"
> 
> 	Option      "LeftEdge"              "1400"
> 	Option      "RightEdge"             "5600"
> 	Option      "TopEdge"               "1400"
> 	Option      "BottomEdge"            "4700"
> 
> 	Option      "FingerLow"             "25"
> 	Option      "FingerHigh"            "30"
> 
> 	Option      "MaxTapTime"            "180"
> 	Option      "MaxTapMove"            "220"
> 
> 	Option      "VertScrollDelta"       "100"
> 	Option      "HorizScrollDelta"      "100"
> 
> 	Option      "MinSpeed"              "0.25"
> 	Option      "MaxSpeed"              "0.5"
> 	Option      "AccelFactor"           "0.0010"
> 	Option      "FastTaps"              "off"
> 
> 	Option      "ScrollButtonRepeat"    "100"
> 	Option      "UpDownScrolling"       "on"
> 	Option      "UpDownRepeat"          "on"
> 	Option      "LeftRightScrolling"    "on"
> 	Option      "LeftRightRepeat"       "on"
> 
> 	Option      "TapButton1"            "0"
> 	Option      "TapButton2"            "0"
> 	Option      "TapButton3"            "0"
> 
> 	# "SHMConfig on" seems good works with synclient(1).  But this
> 	# options is insecure.  I recommended "off" as default.
> 	Option      "SHMConfig"             "on"
> 
> 	# If you use circular touchpad, uncomment them.
> 	#Option          "CircularPad"           "on"
> 	#Option          "CircularScrolling"     "on"
> 	#Option          "CircScrollDelta"       "0.5"
> EndSection
> 
> Section "Monitor"
> 	Identifier   "Monitor0"
> 	VendorName   "Monitor Vendor"
> 	ModelName    "Monitor Model"
> 	Option       "DPMS"
> EndSection
> 
> Section "Device"
>         ### Available Driver options are:-
>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>         ### [arg]: arg optional
>         #Option     "SWcursor"           	# [<bool>]
>         #Option     "HWcursor"           	# [<bool>]
>         #Option     "NoAccel"            	# [<bool>]
>         #Option     "ShadowFB"           	# [<bool>]
>         #Option     "UseFBDev"           	# [<bool>]
>         #Option     "Rotate"             	# [<str>]
>         #Option     "VideoKey"           	# <i>
>         #Option     "FlatPanel"          	# [<bool>]
>         #Option     "FPDither"           	# [<bool>]
>         #Option     "CrtcNumber"         	# <i>
>         #Option     "FPScale"            	# [<bool>]
>         #Option     "FPTweak"            	# <i>
>         #Option     "DualHead"           	# [<bool>]
> 	Option      "UseEdidDpi" "false"
> 	Option      "DPI" "96 x 96"
> 	Identifier  "Card0"
> 	Driver      "nouveau"
> 	VendorName  "nVidia Corporation"
> 	BoardName   "Quadro NVS 140M"
> 	BusID       "PCI:1:0:0"
> 	Option      "AccelMethod" "EXA"
> 	Option      "EXANoComposite" "false"
> 	Option      "FBTexPercent" "50"
> 	Option      "MigrationHeuristic" "greedy"
> 	Option      "DRI" "true
> EndSection
> 
> Section "DRI"
> 	Mode 0666
> EndSection
> 
> Section "Screen"
> 	Identifier "Screen0"
> 	Device     "Card0"
> 	Monitor    "Monitor0"
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     1
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     4
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     8
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     15
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     16
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     24
> 		Modes     "1440x900"
> 	EndSubSection
> EndSection
> 
> plain text document attachment (Xorg.0.nv.log)
> X.Org X Server 1.6.0
> Release Date: 2009-2-25
> X Protocol Version 11, Revision 0
> Build Operating System: FreeBSD 7.1-RELEASE-p4 amd64 
> Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4 FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
> Build Date: 17 May 2009  09:21:33PM
>  
> 	Before reporting problems, check http://wiki.x.org
> 	to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> 	(++) from command line, (!!) notice, (II) informational,
> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 17 21:37:41 2009
> (++) Using config file: "/etc/X11/xorg.conf"
> (==) ServerLayout "X.org Configured"
> (**) |-->Screen "Screen0" (0)
> (**) |   |-->Monitor "Monitor0"
> (**) |   |-->Device "Card0"
> (**) |-->Input Device "Synaptics_Touchpad"
> (**) |-->Input Device "Keyboard0"
> (**) Option "AllowEmptyInput"
> (==) Automatically adding devices
> (==) Automatically enabling devices
> (**) FontPath set to:
> 	/usr/local/lib/X11/fonts/misc/,
> 	/usr/local/lib/X11/fonts/TTF/,
> 	/usr/local/lib/X11/fonts/OTF,
> 	/usr/local/lib/X11/fonts/Type1/,
> 	/usr/local/lib/X11/fonts/100dpi/,
> 	/usr/local/lib/X11/fonts/75dpi/,
> 	/usr/local/lib/X11/fonts/URW/,
> 	/usr/local/lib/X11/fonts/freefont/,
> 	/usr/local/lib/X11/fonts/TrueType/,
> 	/usr/local/lib/X11/fonts/bitstream-vera/,
> 	/usr/local/lib/X11/fonts/cyrillic/,
> 	/usr/local/lib/X11/fonts/encodings/,
> 	/usr/local/lib/X11/fonts/local/,
> 	/usr/local/lib/X11/fonts/util/,
> 	/usr/local/lib/X11/fonts/misc/,
> 	/usr/local/lib/X11/fonts/TTF/,
> 	/usr/local/lib/X11/fonts/OTF,
> 	/usr/local/lib/X11/fonts/Type1/,
> 	/usr/local/lib/X11/fonts/100dpi/,
> 	/usr/local/lib/X11/fonts/75dpi/,
> 	built-ins
> (**) ModulePath set to "/usr/local/lib/xorg/modules"
> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
> (WW) Disabling Keyboard0
> (II) Loader magic: 0x3b20
> (II) Module ABI versions:
> 	X.Org ANSI C Emulation: 0.4
> 	X.Org Video Driver: 5.0
> 	X.Org XInput driver : 4.0
> 	X.Org Server Extension : 2.0
> (II) Loader running on freebsd
> (--) Using syscons driver with X support (version 2.0)
> (--) using VT number 9
> 
> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @ 0x????????/65536
> (II) System resource ranges:
> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
> (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
> (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
> (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
> (II) "record" will be loaded. This was enabled by default and also specified in the config file.
> (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
> (II) "dri2" will be loaded by default.
> (II) LoadModule: "extmod"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	Module class: X.Org Server Extension
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "record"
> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
> (II) Module record: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.13.0
> 	Module class: X.Org Server Extension
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension RECORD
> (II) LoadModule: "dbe"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	Module class: X.Org Server Extension
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "glx"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
> (II) Module glx: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	ABI class: X.Org Server Extension, version 2.0
> (==) AIGLX disabled
> (II) Loading extension GLX
> (II) LoadModule: "xtrap"
> (WW) Warning, couldn't open module xtrap
> (II) UnloadModule: "xtrap"
> (EE) Failed to load module "xtrap" (module does not exist, 0)
> (II) LoadModule: "dri"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
> (II) Module dri: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "freetype"
> (WW) Warning, couldn't open module freetype
> (II) UnloadModule: "freetype"
> (EE) Failed to load module "freetype" (module does not exist, 0)
> (II) LoadModule: "type1"
> (WW) Warning, couldn't open module type1
> (II) UnloadModule: "type1"
> (EE) Failed to load module "type1" (module does not exist, 0)
> (II) LoadModule: "synaptics"
> (II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
> (II) Module synaptics: vendor="X.Org Foundation"
> 	compiled for 1.6.1, module version = 1.1.0
> 	Module class: X.Org XInput Driver
> 	ABI class: X.Org XInput driver, version 4.0
> (II) LoadModule: "dri2"
> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
> (II) Module dri2: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	ABI class: X.Org Server Extension, version 2.0
> (II) Loading extension DRI2
> (II) LoadModule: "nv"
> (II) Loading /usr/local/lib/xorg/modules/drivers//nv_drv.so
> (II) Module nv: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 2.1.13
> 	Module class: X.Org Video Driver
> 	ABI class: X.Org Video Driver, version 5.0
> (II) LoadModule: "synaptics"
> (II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
> (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
> 	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
> 	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
> 	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
> 	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
> 	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
> 	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
> 	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
> 	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
> 	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
> 	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
> 	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
> 	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
> 	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
> 	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
> 	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
> 	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
> 	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
> 	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
> 	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
> 	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
> 	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
> 	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
> 	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
> 	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
> 	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
> 	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
> 	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
> 	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
> 	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
> 	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
> 	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
> 	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
> 	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
> 	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
> 	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
> 	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
> 	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
> 	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
> 	GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
> 	Quadro FX 540, GeForce 6200, GeForce 6500,
> 	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
> 	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
> 	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
> 	GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
> 	GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
> 	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
> 	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
> 	GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
> 	GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
> 	GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
> 	GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
> 	GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
> 	Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
> 	GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
> 	GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
> 	Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
> 	Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
> 	GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
> 	GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
> 	GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
> 	GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
> 	GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
> 	Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
> 	GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
> 	GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
> 	GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
> 	GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
> 	GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
> 	GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
> 	GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
> 	GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
> 	GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro FX 3600M,
> 	GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
> 	GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
> 	GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
> 	GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS,
> 	GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M
> (II) Primary Device is: PCI 01@00:00:0
> (--) NV: Found NVIDIA Quadro NVS 140M at 01@00:00:0
> (II) resource ranges after probing:
> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
> (II) Loading sub module "int10"
> (II) LoadModule: "int10"
> (II) Loading /usr/local/lib/xorg/modules//libint10.so
> (II) Module int10: vendor="X.Org Foundation"
> 	compiled for 1.6.0, module version = 1.0.0
> 	ABI class: X.Org Video Driver, version 5.0
> (II) NV(0): Initializing int10
> (==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
> (==) NV(0): Write-combining range (0xc0000,0x40000) was already clear
> (II) NV(0): Primary V_BIOS segment is: 0xc000
> (==) NV(0): Write-combining range (0x0,0x1000) was already clear
> (--) NV(0): Console is VGA mode 0x3
> (==) NV(0): Depth 24, (--) framebuffer bpp 32
> (==) NV(0): RGB weight 888
> (==) NV(0): Default visual is TrueColor
> (==) NV(0): Using hardware cursor
> (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
> (EE) NV(0): Failed to map MMIO registers: No such file or directory
> (==) NV(0): Write-combining range (0x0,0x1000) was already clear
> (II) UnloadModule: "nv"
> (II) UnloadModule: "int10"
> (II) Unloading /usr/local/lib/xorg/modules//libint10.so
> (EE) Screen(s) found, but none have a usable configuration.
> 
> Fatal server error:
> no screens found
> 
> Please consult the The X.Org Foundation support 
> 	 at http://wiki.x.org
>  for help. 
> Please also check the log file at "/var/log/Xorg.0.log" for additional information.
> 
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090527/84b62f97/attachment-0001.pgp
From andriy at irbisnet.com  Wed May 27 16:03:22 2009
From: andriy at irbisnet.com (Andriy Bakay)
Date: Wed May 27 16:03:36 2009
Subject: Problems with libpciaccess-0.10.6
In-Reply-To: <1243439705.2926.2387.camel@balrog.2hip.net>
References: <4A1D5FDD.9050306@irbisnet.com>
	<1243439705.2926.2387.camel@balrog.2hip.net>
Message-ID: <4A1D6445.1080707@irbisnet.com>

Unfortunately, X server did not store core dump. If you give me options 
which will force X server to make core dump then I can try to reproduce 
it again.

Robert Noland wrote:
> On Wed, 2009-05-27 at 11:44 -0400, Andriy Bakay wrote:
>> Hi X11 Team,
>>
>> Recently I tried to upgrade to 'libpciaccess-0.10.6' port on my laptop: 
>> ThinkPad T61, FreeBSD 7.1 amd64, nVidia Quadro NVS 140M. And my X 
>> (xorg-server-1.6.0,1) server crashed during startup (see attached logs). 
>> I tried 'xorg-server-1.6.1' and two different nVidia drivers 'nv' and 
>> 'nouveau' same crash, but with different log entries. After I downgrade 
>> to 'libpciaccess-0.10.5_6' port both drivers working fine. I attached 
>> the X server logs and configs for both nVidia drivers:
> 
> Hrm, I really didn't think that much changed with 0.10.6.  Any chance
> you can get a backtrace from the X server?
> 
> robert.
> 
>> nv:      Xorg.0.nv.log, xorg.nv.conf
>> nouveau: Xorg.0.nouveau.log, xorg.nouveau.conf
>>
>> Please, advise.
>>
>> Thanks,
>> Andriy
>> plain text document attachment (Xorg.0.nouveau.log)
>> X.Org X Server 1.6.0
>> Release Date: 2009-2-25
>> X Protocol Version 11, Revision 0
>> Build Operating System: FreeBSD 7.0-RELEASE amd64 
>> Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4 FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>> Build Date: 12 April 2009  03:12:50PM
>>  
>> 	Before reporting problems, check http://wiki.x.org
>> 	to make sure that you have the latest version.
>> Markers: (--) probed, (**) from config file, (==) default setting,
>> 	(++) from command line, (!!) notice, (II) informational,
>> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 23 21:47:12 2009
>> (==) Using config file: "/etc/X11/xorg.conf"
>> (==) ServerLayout "X.org Configured"
>> (**) |-->Screen "Screen0" (0)
>> (**) |   |-->Monitor "Monitor0"
>> (**) |   |-->Device "Card0"
>> (**) |-->Input Device "Synaptics_Touchpad"
>> (**) |-->Input Device "Keyboard0"
>> (**) Option "DontZap" "Off"
>> (**) Option "AIGLX" "true"
>> (==) Automatically adding devices
>> (==) Automatically enabling devices
>> (**) FontPath set to:
>> 	/usr/local/lib/X11/fonts/misc/,
>> 	/usr/local/lib/X11/fonts/TTF/,
>> 	/usr/local/lib/X11/fonts/OTF,
>> 	/usr/local/lib/X11/fonts/Type1/,
>> 	/usr/local/lib/X11/fonts/100dpi/,
>> 	/usr/local/lib/X11/fonts/75dpi/,
>> 	/usr/local/lib/X11/fonts/URW/,
>> 	/usr/local/lib/X11/fonts/freefont/,
>> 	/usr/local/lib/X11/fonts/TrueType/,
>> 	/usr/local/lib/X11/fonts/bitstream-vera/,
>> 	/usr/local/lib/X11/fonts/cyrillic/,
>> 	/usr/local/lib/X11/fonts/misc/,
>> 	/usr/local/lib/X11/fonts/TTF/,
>> 	/usr/local/lib/X11/fonts/OTF,
>> 	/usr/local/lib/X11/fonts/Type1/,
>> 	/usr/local/lib/X11/fonts/100dpi/,
>> 	/usr/local/lib/X11/fonts/75dpi/,
>> 	built-ins
>> (**) ModulePath set to "/usr/local/lib/xorg/modules"
>> (**) Extension "Composite" is enabled
>> (**) Extension "XVideo" is enabled
>> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
>> (WW) Disabling Keyboard0
>> (II) Loader magic: 0xb20
>> (II) Module ABI versions:
>> 	X.Org ANSI C Emulation: 0.4
>> 	X.Org Video Driver: 5.0
>> 	X.Org XInput driver : 4.0
>> 	X.Org Server Extension : 2.0
>> (II) Loader running on freebsd
>> (--) Using syscons driver with X support (version 2.0)
>> (--) using VT number 9
>>
>> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @ 0x????????/65536
>> (II) System resource ranges:
>> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>> (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "record" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
>> (II) LoadModule: "extmod"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
>> (II) Module extmod: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	Module class: X.Org Server Extension
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension MIT-SCREEN-SAVER
>> (II) Loading extension XFree86-VidModeExtension
>> (II) Loading extension XFree86-DGA
>> (II) Loading extension DPMS
>> (II) Loading extension XVideo
>> (II) Loading extension XVideo-MotionCompensation
>> (II) Loading extension X-Resource
>> (II) LoadModule: "record"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
>> (II) Module record: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.13.0
>> 	Module class: X.Org Server Extension
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension RECORD
>> (II) LoadModule: "dbe"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
>> (II) Module dbe: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	Module class: X.Org Server Extension
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension DOUBLE-BUFFER
>> (II) LoadModule: "glx"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
>> (II) Module glx: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	ABI class: X.Org Server Extension, version 2.0
>> (**) AIGLX enabled
>> (II) Loading extension GLX
>> (II) LoadModule: "dri"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
>> (II) Module dri: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension XFree86-DRI
>> (II) LoadModule: "dri2"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
>> (II) Module dri2: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension DRI2
>> (II) LoadModule: "synaptics"
>> (II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
>> (II) Module synaptics: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 0.99.3
>> 	Module class: X.Org XInput Driver
>> 	ABI class: X.Org XInput driver, version 4.0
>> (II) LoadModule: "nouveau"
>> (II) Loading /usr/local/lib/xorg/modules/drivers//nouveau_drv.so
>> (II) Module nouveau: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 0.0.10
>> 	Module class: X.Org Video Driver
>> 	ABI class: X.Org Video Driver, version 5.0
>> (II) LoadModule: "synaptics"
>> (II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
>> (II) NOUVEAU driver 20090514.9656762
>> (II) NOUVEAU driver for NVIDIA chipset families :
>> 	RIVA TNT    (NV04)
>> 	RIVA TNT2   (NV05)
>> 	GeForce 256 (NV10)
>> 	GeForce 2   (NV11, NV15)
>> 	GeForce 4MX (NV17, NV18)
>> 	GeForce 3   (NV20)
>> 	GeForce 4Ti (NV25, NV28)
>> 	GeForce FX  (NV3x)
>> 	GeForce 6   (NV4x)
>> 	GeForce 7   (G7x)
>> 	GeForce 8   (G8x)
>> (II) Primary Device is: PCI 01@00:00:0
>>
>> Fatal server error:
>> Caught signal 11.  Server aborting
>>
>>
>> Please consult the The X.Org Foundation support 
>> 	 at http://wiki.x.org
>>  for help. 
>> Please also check the log file at "/var/log/Xorg.0.log" for additional information.
>>
>> plain text document attachment (xorg.nv.conf)
>> Section "ServerLayout"
>> 	Identifier     "X.org Configured"
>> 	Screen      0  "Screen0" 0 0
>> #	InputDevice    "Mouse0" "CorePointer"
>> 	InputDevice    "Synaptics_Touchpad" "CorePointer"
>> 	InputDevice    "Keyboard0" "CoreKeyboard"
>> 	Option         "DontZap" "Off"
>> 	Option         "AIGLX" "true"
>> EndSection
>>
>> Section "Extensions"
>> 	Option       "Composite" "Enable"
>> 	Option       "XVideo" "Enable"
>> EndSection
>>
>> Section "Files"
>> 	ModulePath   "/usr/local/lib/xorg/modules"
>> 	FontPath     "/usr/local/lib/X11/fonts/misc/"
>> 	FontPath     "/usr/local/lib/X11/fonts/TTF/"
>> 	FontPath     "/usr/local/lib/X11/fonts/OTF"
>> 	FontPath     "/usr/local/lib/X11/fonts/Type1/"
>> 	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
>> 	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
>> 	FontPath     "/usr/local/lib/X11/fonts/URW/"
>> 	FontPath     "/usr/local/lib/X11/fonts/freefont/"
>> 	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
>> 	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
>> 	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
>> EndSection
>>
>> Section "Module"
>> 	Load  "extmod"
>> 	Load  "record"
>> 	Load  "dbe"
>> 	Load  "glx"
>> 	Load  "dri"
>> 	Load  "dri2"
>> 	Load  "synaptics"
>> EndSection
>>
>> #Section "ServerFlags"
>> #	Option      "AllowEmptyInput"
>> #EndSection
>>
>> Section "InputDevice"
>> 	Identifier  "Keyboard0"
>> 	Driver      "kbd"
>> EndSection
>>
>> #Section "InputDevice"
>> #	Identifier  "Mouse0"
>> #	Driver      "mouse"
>> #	Option	    "Protocol" "auto"
>> #	Option	    "Device" "/dev/sysmouse"
>> #	Option	    "ZAxisMapping" "4 5 6 7"
>> #EndSection
>>
>> Section "InputDevice"
>> 	Identifier  "Synaptics_Touchpad"
>> 	Driver      "synaptics"
>>
>> 	Option      "Device"                "/dev/psm0"
>> 	Option      "Protocol"              "psm"
>>
>> 	Option      "LeftEdge"              "1400"
>> 	Option      "RightEdge"             "5600"
>> 	Option      "TopEdge"               "1400"
>> 	Option      "BottomEdge"            "4700"
>>
>> 	Option      "FingerLow"             "25"
>> 	Option      "FingerHigh"            "30"
>>
>> 	Option      "MaxTapTime"            "180"
>> 	Option      "MaxTapMove"            "220"
>>
>> 	Option      "VertScrollDelta"       "100"
>> 	Option      "HorizScrollDelta"      "100"
>>
>> 	Option      "MinSpeed"              "0.1"
>> 	Option      "MaxSpeed"              "0.25"
>> 	Option      "AccelFactor"           "0.0010"
>> 	Option      "FastTaps"              "off"
>>
>> 	Option      "ScrollButtonRepeat"    "100"
>> 	Option      "UpDownScrolling"       "on"
>> 	Option      "UpDownRepeat"          "on"
>> 	Option      "LeftRightScrolling"    "on"
>> 	Option      "LeftRightRepeat"       "on"
>>
>> 	Option      "TapButton1"            "0"
>> 	Option      "TapButton2"            "0"
>> 	Option      "TapButton3"            "0"
>>
>> 	# "SHMConfig on" seems good works with synclient(1).  But this
>> 	# options is insecure.  I recommended "off" as default.
>> 	Option      "SHMConfig"             "on"
>>
>> 	# If you use circular touchpad, uncomment them.
>> 	#Option          "CircularPad"           "on"
>> 	#Option          "CircularScrolling"     "on"
>> 	#Option          "CircScrollDelta"       "0.5"
>> EndSection
>>
>> Section "Monitor"
>> 	Identifier   "Monitor0"
>> 	VendorName   "Monitor Vendor"
>> 	ModelName    "Monitor Model"
>> 	Option       "DPMS"
>> EndSection
>>
>> Section "Device"
>>         ### Available Driver options are:-
>>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>>         ### [arg]: arg optional
>>         #Option     "SWcursor"           	# [<bool>]
>>         #Option     "HWcursor"           	# [<bool>]
>>         #Option     "NoAccel"            	# [<bool>]
>>         #Option     "ShadowFB"           	# [<bool>]
>>         #Option     "UseFBDev"           	# [<bool>]
>>         #Option     "Rotate"             	# [<str>]
>>         #Option     "VideoKey"           	# <i>
>>         #Option     "FlatPanel"          	# [<bool>]
>>         #Option     "FPDither"           	# [<bool>]
>>         #Option     "CrtcNumber"         	# <i>
>>         #Option     "FPScale"            	# [<bool>]
>>         #Option     "FPTweak"            	# <i>
>>         #Option     "DualHead"           	# [<bool>]
>> 	Option      "UseEdidDpi" "false"
>> 	Option      "DPI" "96 x 96"
>> 	Identifier  "Card0"
>> 	Driver      "nv"
>> 	VendorName  "nVidia Corporation"
>> 	BoardName   "Quadro NVS 140M"
>> 	BusID       "PCI:1:0:0"
>> EndSection
>>
>> Section "DRI"
>> 	Mode 0666
>> EndSection
>>
>> Section "Screen"
>> 	Identifier "Screen0"
>> 	Device     "Card0"
>> 	Monitor    "Monitor0"
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     1
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     4
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     8
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     15
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     16
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     24
>> 		Modes     "1440x900"
>> 	EndSubSection
>> EndSection
>>
>> plain text document attachment (xorg.nouveau.conf)
>> Section "ServerLayout"
>> 	Identifier     "X.org Configured"
>> 	Screen      0  "Screen0" 0 0
>> #	InputDevice    "Mouse0" "CorePointer"
>> 	InputDevice    "Synaptics_Touchpad" "CorePointer"
>> 	InputDevice    "Keyboard0" "CoreKeyboard"
>> 	Option         "DontZap" "Off"
>> 	Option         "AIGLX" "true"
>> EndSection
>>
>> Section "Extensions"
>> 	Option       "Composite" "Enable"
>> 	Option       "XVideo" "Enable"
>> EndSection
>>
>> Section "Files"
>> 	ModulePath   "/usr/local/lib/xorg/modules"
>> 	FontPath     "/usr/local/lib/X11/fonts/misc/"
>> 	FontPath     "/usr/local/lib/X11/fonts/TTF/"
>> 	FontPath     "/usr/local/lib/X11/fonts/OTF"
>> 	FontPath     "/usr/local/lib/X11/fonts/Type1/"
>> 	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
>> 	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
>> 	FontPath     "/usr/local/lib/X11/fonts/URW/"
>> 	FontPath     "/usr/local/lib/X11/fonts/freefont/"
>> 	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
>> 	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
>> 	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
>> EndSection
>>
>> Section "Module"
>> 	Load  "extmod"
>> 	Load  "record"
>> 	Load  "dbe"
>> 	Load  "glx"
>> 	Load  "dri"
>> 	Load  "dri2"
>> 	Load  "synaptics"
>> EndSection
>>
>> #Section "ServerFlags"
>> #	Option      "AllowEmptyInput"
>> #EndSection
>>
>> Section "InputDevice"
>> 	Identifier  "Keyboard0"
>> 	Driver      "kbd"
>> EndSection
>>
>> #Section "InputDevice"
>> #	Identifier  "Mouse0"
>> #	Driver      "mouse"
>> #	Option	    "Protocol" "auto"
>> #	Option	    "Device" "/dev/sysmouse"
>> #	Option	    "ZAxisMapping" "4 5 6 7"
>> #EndSection
>>
>> Section "InputDevice"
>> 	Identifier  "Synaptics_Touchpad"
>> 	Driver      "synaptics"
>>
>> 	Option      "Device"                "/dev/psm0"
>> 	Option      "Protocol"              "psm"
>>
>> 	Option      "LeftEdge"              "1400"
>> 	Option      "RightEdge"             "5600"
>> 	Option      "TopEdge"               "1400"
>> 	Option      "BottomEdge"            "4700"
>>
>> 	Option      "FingerLow"             "25"
>> 	Option      "FingerHigh"            "30"
>>
>> 	Option      "MaxTapTime"            "180"
>> 	Option      "MaxTapMove"            "220"
>>
>> 	Option      "VertScrollDelta"       "100"
>> 	Option      "HorizScrollDelta"      "100"
>>
>> 	Option      "MinSpeed"              "0.25"
>> 	Option      "MaxSpeed"              "0.5"
>> 	Option      "AccelFactor"           "0.0010"
>> 	Option      "FastTaps"              "off"
>>
>> 	Option      "ScrollButtonRepeat"    "100"
>> 	Option      "UpDownScrolling"       "on"
>> 	Option      "UpDownRepeat"          "on"
>> 	Option      "LeftRightScrolling"    "on"
>> 	Option      "LeftRightRepeat"       "on"
>>
>> 	Option      "TapButton1"            "0"
>> 	Option      "TapButton2"            "0"
>> 	Option      "TapButton3"            "0"
>>
>> 	# "SHMConfig on" seems good works with synclient(1).  But this
>> 	# options is insecure.  I recommended "off" as default.
>> 	Option      "SHMConfig"             "on"
>>
>> 	# If you use circular touchpad, uncomment them.
>> 	#Option          "CircularPad"           "on"
>> 	#Option          "CircularScrolling"     "on"
>> 	#Option          "CircScrollDelta"       "0.5"
>> EndSection
>>
>> Section "Monitor"
>> 	Identifier   "Monitor0"
>> 	VendorName   "Monitor Vendor"
>> 	ModelName    "Monitor Model"
>> 	Option       "DPMS"
>> EndSection
>>
>> Section "Device"
>>         ### Available Driver options are:-
>>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>>         ### [arg]: arg optional
>>         #Option     "SWcursor"           	# [<bool>]
>>         #Option     "HWcursor"           	# [<bool>]
>>         #Option     "NoAccel"            	# [<bool>]
>>         #Option     "ShadowFB"           	# [<bool>]
>>         #Option     "UseFBDev"           	# [<bool>]
>>         #Option     "Rotate"             	# [<str>]
>>         #Option     "VideoKey"           	# <i>
>>         #Option     "FlatPanel"          	# [<bool>]
>>         #Option     "FPDither"           	# [<bool>]
>>         #Option     "CrtcNumber"         	# <i>
>>         #Option     "FPScale"            	# [<bool>]
>>         #Option     "FPTweak"            	# <i>
>>         #Option     "DualHead"           	# [<bool>]
>> 	Option      "UseEdidDpi" "false"
>> 	Option      "DPI" "96 x 96"
>> 	Identifier  "Card0"
>> 	Driver      "nouveau"
>> 	VendorName  "nVidia Corporation"
>> 	BoardName   "Quadro NVS 140M"
>> 	BusID       "PCI:1:0:0"
>> 	Option      "AccelMethod" "EXA"
>> 	Option      "EXANoComposite" "false"
>> 	Option      "FBTexPercent" "50"
>> 	Option      "MigrationHeuristic" "greedy"
>> 	Option      "DRI" "true
>> EndSection
>>
>> Section "DRI"
>> 	Mode 0666
>> EndSection
>>
>> Section "Screen"
>> 	Identifier "Screen0"
>> 	Device     "Card0"
>> 	Monitor    "Monitor0"
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     1
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     4
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     8
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     15
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     16
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     24
>> 		Modes     "1440x900"
>> 	EndSubSection
>> EndSection
>>
>> plain text document attachment (Xorg.0.nv.log)
>> X.Org X Server 1.6.0
>> Release Date: 2009-2-25
>> X Protocol Version 11, Revision 0
>> Build Operating System: FreeBSD 7.1-RELEASE-p4 amd64 
>> Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4 FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>> Build Date: 17 May 2009  09:21:33PM
>>  
>> 	Before reporting problems, check http://wiki.x.org
>> 	to make sure that you have the latest version.
>> Markers: (--) probed, (**) from config file, (==) default setting,
>> 	(++) from command line, (!!) notice, (II) informational,
>> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 17 21:37:41 2009
>> (++) Using config file: "/etc/X11/xorg.conf"
>> (==) ServerLayout "X.org Configured"
>> (**) |-->Screen "Screen0" (0)
>> (**) |   |-->Monitor "Monitor0"
>> (**) |   |-->Device "Card0"
>> (**) |-->Input Device "Synaptics_Touchpad"
>> (**) |-->Input Device "Keyboard0"
>> (**) Option "AllowEmptyInput"
>> (==) Automatically adding devices
>> (==) Automatically enabling devices
>> (**) FontPath set to:
>> 	/usr/local/lib/X11/fonts/misc/,
>> 	/usr/local/lib/X11/fonts/TTF/,
>> 	/usr/local/lib/X11/fonts/OTF,
>> 	/usr/local/lib/X11/fonts/Type1/,
>> 	/usr/local/lib/X11/fonts/100dpi/,
>> 	/usr/local/lib/X11/fonts/75dpi/,
>> 	/usr/local/lib/X11/fonts/URW/,
>> 	/usr/local/lib/X11/fonts/freefont/,
>> 	/usr/local/lib/X11/fonts/TrueType/,
>> 	/usr/local/lib/X11/fonts/bitstream-vera/,
>> 	/usr/local/lib/X11/fonts/cyrillic/,
>> 	/usr/local/lib/X11/fonts/encodings/,
>> 	/usr/local/lib/X11/fonts/local/,
>> 	/usr/local/lib/X11/fonts/util/,
>> 	/usr/local/lib/X11/fonts/misc/,
>> 	/usr/local/lib/X11/fonts/TTF/,
>> 	/usr/local/lib/X11/fonts/OTF,
>> 	/usr/local/lib/X11/fonts/Type1/,
>> 	/usr/local/lib/X11/fonts/100dpi/,
>> 	/usr/local/lib/X11/fonts/75dpi/,
>> 	built-ins
>> (**) ModulePath set to "/usr/local/lib/xorg/modules"
>> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
>> (WW) Disabling Keyboard0
>> (II) Loader magic: 0x3b20
>> (II) Module ABI versions:
>> 	X.Org ANSI C Emulation: 0.4
>> 	X.Org Video Driver: 5.0
>> 	X.Org XInput driver : 4.0
>> 	X.Org Server Extension : 2.0
>> (II) Loader running on freebsd
>> (--) Using syscons driver with X support (version 2.0)
>> (--) using VT number 9
>>
>> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @ 0x????????/65536
>> (II) System resource ranges:
>> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>> (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "record" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "dri2" will be loaded by default.
>> (II) LoadModule: "extmod"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
>> (II) Module extmod: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	Module class: X.Org Server Extension
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension MIT-SCREEN-SAVER
>> (II) Loading extension XFree86-VidModeExtension
>> (II) Loading extension XFree86-DGA
>> (II) Loading extension DPMS
>> (II) Loading extension XVideo
>> (II) Loading extension XVideo-MotionCompensation
>> (II) Loading extension X-Resource
>> (II) LoadModule: "record"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
>> (II) Module record: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.13.0
>> 	Module class: X.Org Server Extension
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension RECORD
>> (II) LoadModule: "dbe"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
>> (II) Module dbe: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	Module class: X.Org Server Extension
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension DOUBLE-BUFFER
>> (II) LoadModule: "glx"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
>> (II) Module glx: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	ABI class: X.Org Server Extension, version 2.0
>> (==) AIGLX disabled
>> (II) Loading extension GLX
>> (II) LoadModule: "xtrap"
>> (WW) Warning, couldn't open module xtrap
>> (II) UnloadModule: "xtrap"
>> (EE) Failed to load module "xtrap" (module does not exist, 0)
>> (II) LoadModule: "dri"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
>> (II) Module dri: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension XFree86-DRI
>> (II) LoadModule: "freetype"
>> (WW) Warning, couldn't open module freetype
>> (II) UnloadModule: "freetype"
>> (EE) Failed to load module "freetype" (module does not exist, 0)
>> (II) LoadModule: "type1"
>> (WW) Warning, couldn't open module type1
>> (II) UnloadModule: "type1"
>> (EE) Failed to load module "type1" (module does not exist, 0)
>> (II) LoadModule: "synaptics"
>> (II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
>> (II) Module synaptics: vendor="X.Org Foundation"
>> 	compiled for 1.6.1, module version = 1.1.0
>> 	Module class: X.Org XInput Driver
>> 	ABI class: X.Org XInput driver, version 4.0
>> (II) LoadModule: "dri2"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
>> (II) Module dri2: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension DRI2
>> (II) LoadModule: "nv"
>> (II) Loading /usr/local/lib/xorg/modules/drivers//nv_drv.so
>> (II) Module nv: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 2.1.13
>> 	Module class: X.Org Video Driver
>> 	ABI class: X.Org Video Driver, version 5.0
>> (II) LoadModule: "synaptics"
>> (II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
>> (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
>> 	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
>> 	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
>> 	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
>> 	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
>> 	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
>> 	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
>> 	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
>> 	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
>> 	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
>> 	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
>> 	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
>> 	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
>> 	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
>> 	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
>> 	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
>> 	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
>> 	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
>> 	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
>> 	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
>> 	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
>> 	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
>> 	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
>> 	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
>> 	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
>> 	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
>> 	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
>> 	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
>> 	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
>> 	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
>> 	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
>> 	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
>> 	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
>> 	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
>> 	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
>> 	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
>> 	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
>> 	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
>> 	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
>> 	GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
>> 	Quadro FX 540, GeForce 6200, GeForce 6500,
>> 	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
>> 	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
>> 	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
>> 	GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
>> 	GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
>> 	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
>> 	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
>> 	GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
>> 	GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
>> 	GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
>> 	GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
>> 	GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
>> 	Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
>> 	GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
>> 	GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
>> 	Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
>> 	Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
>> 	GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
>> 	GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
>> 	GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
>> 	GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
>> 	GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
>> 	Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
>> 	GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
>> 	GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
>> 	GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
>> 	GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
>> 	GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
>> 	GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
>> 	GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
>> 	GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
>> 	GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro FX 3600M,
>> 	GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
>> 	GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
>> 	GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
>> 	GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS,
>> 	GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M
>> (II) Primary Device is: PCI 01@00:00:0
>> (--) NV: Found NVIDIA Quadro NVS 140M at 01@00:00:0
>> (II) resource ranges after probing:
>> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>> (II) Loading sub module "int10"
>> (II) LoadModule: "int10"
>> (II) Loading /usr/local/lib/xorg/modules//libint10.so
>> (II) Module int10: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	ABI class: X.Org Video Driver, version 5.0
>> (II) NV(0): Initializing int10
>> (==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
>> (==) NV(0): Write-combining range (0xc0000,0x40000) was already clear
>> (II) NV(0): Primary V_BIOS segment is: 0xc000
>> (==) NV(0): Write-combining range (0x0,0x1000) was already clear
>> (--) NV(0): Console is VGA mode 0x3
>> (==) NV(0): Depth 24, (--) framebuffer bpp 32
>> (==) NV(0): RGB weight 888
>> (==) NV(0): Default visual is TrueColor
>> (==) NV(0): Using hardware cursor
>> (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
>> (EE) NV(0): Failed to map MMIO registers: No such file or directory
>> (==) NV(0): Write-combining range (0x0,0x1000) was already clear
>> (II) UnloadModule: "nv"
>> (II) UnloadModule: "int10"
>> (II) Unloading /usr/local/lib/xorg/modules//libint10.so
>> (EE) Screen(s) found, but none have a usable configuration.
>>
>> Fatal server error:
>> no screens found
>>
>> Please consult the The X.Org Foundation support 
>> 	 at http://wiki.x.org
>>  for help. 
>> Please also check the log file at "/var/log/Xorg.0.log" for additional information.
>>
>> _______________________________________________
>> freebsd-x11@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
>> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
From andriy at irbisnet.com  Wed May 27 16:03:23 2009
From: andriy at irbisnet.com (Andriy Bakay)
Date: Wed May 27 16:03:37 2009
Subject: Problems with libpciaccess-0.10.6
In-Reply-To: <1243439705.2926.2387.camel@balrog.2hip.net>
References: <4A1D5FDD.9050306@irbisnet.com>
	<1243439705.2926.2387.camel@balrog.2hip.net>
Message-ID: <4A1D6445.1080707@irbisnet.com>

Unfortunately, X server did not store core dump. If you give me options 
which will force X server to make core dump then I can try to reproduce 
it again.

Robert Noland wrote:
> On Wed, 2009-05-27 at 11:44 -0400, Andriy Bakay wrote:
>> Hi X11 Team,
>>
>> Recently I tried to upgrade to 'libpciaccess-0.10.6' port on my laptop: 
>> ThinkPad T61, FreeBSD 7.1 amd64, nVidia Quadro NVS 140M. And my X 
>> (xorg-server-1.6.0,1) server crashed during startup (see attached logs). 
>> I tried 'xorg-server-1.6.1' and two different nVidia drivers 'nv' and 
>> 'nouveau' same crash, but with different log entries. After I downgrade 
>> to 'libpciaccess-0.10.5_6' port both drivers working fine. I attached 
>> the X server logs and configs for both nVidia drivers:
> 
> Hrm, I really didn't think that much changed with 0.10.6.  Any chance
> you can get a backtrace from the X server?
> 
> robert.
> 
>> nv:      Xorg.0.nv.log, xorg.nv.conf
>> nouveau: Xorg.0.nouveau.log, xorg.nouveau.conf
>>
>> Please, advise.
>>
>> Thanks,
>> Andriy
>> plain text document attachment (Xorg.0.nouveau.log)
>> X.Org X Server 1.6.0
>> Release Date: 2009-2-25
>> X Protocol Version 11, Revision 0
>> Build Operating System: FreeBSD 7.0-RELEASE amd64 
>> Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4 FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>> Build Date: 12 April 2009  03:12:50PM
>>  
>> 	Before reporting problems, check http://wiki.x.org
>> 	to make sure that you have the latest version.
>> Markers: (--) probed, (**) from config file, (==) default setting,
>> 	(++) from command line, (!!) notice, (II) informational,
>> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 23 21:47:12 2009
>> (==) Using config file: "/etc/X11/xorg.conf"
>> (==) ServerLayout "X.org Configured"
>> (**) |-->Screen "Screen0" (0)
>> (**) |   |-->Monitor "Monitor0"
>> (**) |   |-->Device "Card0"
>> (**) |-->Input Device "Synaptics_Touchpad"
>> (**) |-->Input Device "Keyboard0"
>> (**) Option "DontZap" "Off"
>> (**) Option "AIGLX" "true"
>> (==) Automatically adding devices
>> (==) Automatically enabling devices
>> (**) FontPath set to:
>> 	/usr/local/lib/X11/fonts/misc/,
>> 	/usr/local/lib/X11/fonts/TTF/,
>> 	/usr/local/lib/X11/fonts/OTF,
>> 	/usr/local/lib/X11/fonts/Type1/,
>> 	/usr/local/lib/X11/fonts/100dpi/,
>> 	/usr/local/lib/X11/fonts/75dpi/,
>> 	/usr/local/lib/X11/fonts/URW/,
>> 	/usr/local/lib/X11/fonts/freefont/,
>> 	/usr/local/lib/X11/fonts/TrueType/,
>> 	/usr/local/lib/X11/fonts/bitstream-vera/,
>> 	/usr/local/lib/X11/fonts/cyrillic/,
>> 	/usr/local/lib/X11/fonts/misc/,
>> 	/usr/local/lib/X11/fonts/TTF/,
>> 	/usr/local/lib/X11/fonts/OTF,
>> 	/usr/local/lib/X11/fonts/Type1/,
>> 	/usr/local/lib/X11/fonts/100dpi/,
>> 	/usr/local/lib/X11/fonts/75dpi/,
>> 	built-ins
>> (**) ModulePath set to "/usr/local/lib/xorg/modules"
>> (**) Extension "Composite" is enabled
>> (**) Extension "XVideo" is enabled
>> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
>> (WW) Disabling Keyboard0
>> (II) Loader magic: 0xb20
>> (II) Module ABI versions:
>> 	X.Org ANSI C Emulation: 0.4
>> 	X.Org Video Driver: 5.0
>> 	X.Org XInput driver : 4.0
>> 	X.Org Server Extension : 2.0
>> (II) Loader running on freebsd
>> (--) Using syscons driver with X support (version 2.0)
>> (--) using VT number 9
>>
>> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @ 0x????????/65536
>> (II) System resource ranges:
>> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>> (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "record" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
>> (II) LoadModule: "extmod"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
>> (II) Module extmod: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	Module class: X.Org Server Extension
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension MIT-SCREEN-SAVER
>> (II) Loading extension XFree86-VidModeExtension
>> (II) Loading extension XFree86-DGA
>> (II) Loading extension DPMS
>> (II) Loading extension XVideo
>> (II) Loading extension XVideo-MotionCompensation
>> (II) Loading extension X-Resource
>> (II) LoadModule: "record"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
>> (II) Module record: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.13.0
>> 	Module class: X.Org Server Extension
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension RECORD
>> (II) LoadModule: "dbe"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
>> (II) Module dbe: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	Module class: X.Org Server Extension
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension DOUBLE-BUFFER
>> (II) LoadModule: "glx"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
>> (II) Module glx: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	ABI class: X.Org Server Extension, version 2.0
>> (**) AIGLX enabled
>> (II) Loading extension GLX
>> (II) LoadModule: "dri"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
>> (II) Module dri: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension XFree86-DRI
>> (II) LoadModule: "dri2"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
>> (II) Module dri2: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension DRI2
>> (II) LoadModule: "synaptics"
>> (II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
>> (II) Module synaptics: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 0.99.3
>> 	Module class: X.Org XInput Driver
>> 	ABI class: X.Org XInput driver, version 4.0
>> (II) LoadModule: "nouveau"
>> (II) Loading /usr/local/lib/xorg/modules/drivers//nouveau_drv.so
>> (II) Module nouveau: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 0.0.10
>> 	Module class: X.Org Video Driver
>> 	ABI class: X.Org Video Driver, version 5.0
>> (II) LoadModule: "synaptics"
>> (II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
>> (II) NOUVEAU driver 20090514.9656762
>> (II) NOUVEAU driver for NVIDIA chipset families :
>> 	RIVA TNT    (NV04)
>> 	RIVA TNT2   (NV05)
>> 	GeForce 256 (NV10)
>> 	GeForce 2   (NV11, NV15)
>> 	GeForce 4MX (NV17, NV18)
>> 	GeForce 3   (NV20)
>> 	GeForce 4Ti (NV25, NV28)
>> 	GeForce FX  (NV3x)
>> 	GeForce 6   (NV4x)
>> 	GeForce 7   (G7x)
>> 	GeForce 8   (G8x)
>> (II) Primary Device is: PCI 01@00:00:0
>>
>> Fatal server error:
>> Caught signal 11.  Server aborting
>>
>>
>> Please consult the The X.Org Foundation support 
>> 	 at http://wiki.x.org
>>  for help. 
>> Please also check the log file at "/var/log/Xorg.0.log" for additional information.
>>
>> plain text document attachment (xorg.nv.conf)
>> Section "ServerLayout"
>> 	Identifier     "X.org Configured"
>> 	Screen      0  "Screen0" 0 0
>> #	InputDevice    "Mouse0" "CorePointer"
>> 	InputDevice    "Synaptics_Touchpad" "CorePointer"
>> 	InputDevice    "Keyboard0" "CoreKeyboard"
>> 	Option         "DontZap" "Off"
>> 	Option         "AIGLX" "true"
>> EndSection
>>
>> Section "Extensions"
>> 	Option       "Composite" "Enable"
>> 	Option       "XVideo" "Enable"
>> EndSection
>>
>> Section "Files"
>> 	ModulePath   "/usr/local/lib/xorg/modules"
>> 	FontPath     "/usr/local/lib/X11/fonts/misc/"
>> 	FontPath     "/usr/local/lib/X11/fonts/TTF/"
>> 	FontPath     "/usr/local/lib/X11/fonts/OTF"
>> 	FontPath     "/usr/local/lib/X11/fonts/Type1/"
>> 	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
>> 	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
>> 	FontPath     "/usr/local/lib/X11/fonts/URW/"
>> 	FontPath     "/usr/local/lib/X11/fonts/freefont/"
>> 	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
>> 	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
>> 	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
>> EndSection
>>
>> Section "Module"
>> 	Load  "extmod"
>> 	Load  "record"
>> 	Load  "dbe"
>> 	Load  "glx"
>> 	Load  "dri"
>> 	Load  "dri2"
>> 	Load  "synaptics"
>> EndSection
>>
>> #Section "ServerFlags"
>> #	Option      "AllowEmptyInput"
>> #EndSection
>>
>> Section "InputDevice"
>> 	Identifier  "Keyboard0"
>> 	Driver      "kbd"
>> EndSection
>>
>> #Section "InputDevice"
>> #	Identifier  "Mouse0"
>> #	Driver      "mouse"
>> #	Option	    "Protocol" "auto"
>> #	Option	    "Device" "/dev/sysmouse"
>> #	Option	    "ZAxisMapping" "4 5 6 7"
>> #EndSection
>>
>> Section "InputDevice"
>> 	Identifier  "Synaptics_Touchpad"
>> 	Driver      "synaptics"
>>
>> 	Option      "Device"                "/dev/psm0"
>> 	Option      "Protocol"              "psm"
>>
>> 	Option      "LeftEdge"              "1400"
>> 	Option      "RightEdge"             "5600"
>> 	Option      "TopEdge"               "1400"
>> 	Option      "BottomEdge"            "4700"
>>
>> 	Option      "FingerLow"             "25"
>> 	Option      "FingerHigh"            "30"
>>
>> 	Option      "MaxTapTime"            "180"
>> 	Option      "MaxTapMove"            "220"
>>
>> 	Option      "VertScrollDelta"       "100"
>> 	Option      "HorizScrollDelta"      "100"
>>
>> 	Option      "MinSpeed"              "0.1"
>> 	Option      "MaxSpeed"              "0.25"
>> 	Option      "AccelFactor"           "0.0010"
>> 	Option      "FastTaps"              "off"
>>
>> 	Option      "ScrollButtonRepeat"    "100"
>> 	Option      "UpDownScrolling"       "on"
>> 	Option      "UpDownRepeat"          "on"
>> 	Option      "LeftRightScrolling"    "on"
>> 	Option      "LeftRightRepeat"       "on"
>>
>> 	Option      "TapButton1"            "0"
>> 	Option      "TapButton2"            "0"
>> 	Option      "TapButton3"            "0"
>>
>> 	# "SHMConfig on" seems good works with synclient(1).  But this
>> 	# options is insecure.  I recommended "off" as default.
>> 	Option      "SHMConfig"             "on"
>>
>> 	# If you use circular touchpad, uncomment them.
>> 	#Option          "CircularPad"           "on"
>> 	#Option          "CircularScrolling"     "on"
>> 	#Option          "CircScrollDelta"       "0.5"
>> EndSection
>>
>> Section "Monitor"
>> 	Identifier   "Monitor0"
>> 	VendorName   "Monitor Vendor"
>> 	ModelName    "Monitor Model"
>> 	Option       "DPMS"
>> EndSection
>>
>> Section "Device"
>>         ### Available Driver options are:-
>>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>>         ### [arg]: arg optional
>>         #Option     "SWcursor"           	# [<bool>]
>>         #Option     "HWcursor"           	# [<bool>]
>>         #Option     "NoAccel"            	# [<bool>]
>>         #Option     "ShadowFB"           	# [<bool>]
>>         #Option     "UseFBDev"           	# [<bool>]
>>         #Option     "Rotate"             	# [<str>]
>>         #Option     "VideoKey"           	# <i>
>>         #Option     "FlatPanel"          	# [<bool>]
>>         #Option     "FPDither"           	# [<bool>]
>>         #Option     "CrtcNumber"         	# <i>
>>         #Option     "FPScale"            	# [<bool>]
>>         #Option     "FPTweak"            	# <i>
>>         #Option     "DualHead"           	# [<bool>]
>> 	Option      "UseEdidDpi" "false"
>> 	Option      "DPI" "96 x 96"
>> 	Identifier  "Card0"
>> 	Driver      "nv"
>> 	VendorName  "nVidia Corporation"
>> 	BoardName   "Quadro NVS 140M"
>> 	BusID       "PCI:1:0:0"
>> EndSection
>>
>> Section "DRI"
>> 	Mode 0666
>> EndSection
>>
>> Section "Screen"
>> 	Identifier "Screen0"
>> 	Device     "Card0"
>> 	Monitor    "Monitor0"
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     1
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     4
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     8
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     15
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     16
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     24
>> 		Modes     "1440x900"
>> 	EndSubSection
>> EndSection
>>
>> plain text document attachment (xorg.nouveau.conf)
>> Section "ServerLayout"
>> 	Identifier     "X.org Configured"
>> 	Screen      0  "Screen0" 0 0
>> #	InputDevice    "Mouse0" "CorePointer"
>> 	InputDevice    "Synaptics_Touchpad" "CorePointer"
>> 	InputDevice    "Keyboard0" "CoreKeyboard"
>> 	Option         "DontZap" "Off"
>> 	Option         "AIGLX" "true"
>> EndSection
>>
>> Section "Extensions"
>> 	Option       "Composite" "Enable"
>> 	Option       "XVideo" "Enable"
>> EndSection
>>
>> Section "Files"
>> 	ModulePath   "/usr/local/lib/xorg/modules"
>> 	FontPath     "/usr/local/lib/X11/fonts/misc/"
>> 	FontPath     "/usr/local/lib/X11/fonts/TTF/"
>> 	FontPath     "/usr/local/lib/X11/fonts/OTF"
>> 	FontPath     "/usr/local/lib/X11/fonts/Type1/"
>> 	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
>> 	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
>> 	FontPath     "/usr/local/lib/X11/fonts/URW/"
>> 	FontPath     "/usr/local/lib/X11/fonts/freefont/"
>> 	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
>> 	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
>> 	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
>> EndSection
>>
>> Section "Module"
>> 	Load  "extmod"
>> 	Load  "record"
>> 	Load  "dbe"
>> 	Load  "glx"
>> 	Load  "dri"
>> 	Load  "dri2"
>> 	Load  "synaptics"
>> EndSection
>>
>> #Section "ServerFlags"
>> #	Option      "AllowEmptyInput"
>> #EndSection
>>
>> Section "InputDevice"
>> 	Identifier  "Keyboard0"
>> 	Driver      "kbd"
>> EndSection
>>
>> #Section "InputDevice"
>> #	Identifier  "Mouse0"
>> #	Driver      "mouse"
>> #	Option	    "Protocol" "auto"
>> #	Option	    "Device" "/dev/sysmouse"
>> #	Option	    "ZAxisMapping" "4 5 6 7"
>> #EndSection
>>
>> Section "InputDevice"
>> 	Identifier  "Synaptics_Touchpad"
>> 	Driver      "synaptics"
>>
>> 	Option      "Device"                "/dev/psm0"
>> 	Option      "Protocol"              "psm"
>>
>> 	Option      "LeftEdge"              "1400"
>> 	Option      "RightEdge"             "5600"
>> 	Option      "TopEdge"               "1400"
>> 	Option      "BottomEdge"            "4700"
>>
>> 	Option      "FingerLow"             "25"
>> 	Option      "FingerHigh"            "30"
>>
>> 	Option      "MaxTapTime"            "180"
>> 	Option      "MaxTapMove"            "220"
>>
>> 	Option      "VertScrollDelta"       "100"
>> 	Option      "HorizScrollDelta"      "100"
>>
>> 	Option      "MinSpeed"              "0.25"
>> 	Option      "MaxSpeed"              "0.5"
>> 	Option      "AccelFactor"           "0.0010"
>> 	Option      "FastTaps"              "off"
>>
>> 	Option      "ScrollButtonRepeat"    "100"
>> 	Option      "UpDownScrolling"       "on"
>> 	Option      "UpDownRepeat"          "on"
>> 	Option      "LeftRightScrolling"    "on"
>> 	Option      "LeftRightRepeat"       "on"
>>
>> 	Option      "TapButton1"            "0"
>> 	Option      "TapButton2"            "0"
>> 	Option      "TapButton3"            "0"
>>
>> 	# "SHMConfig on" seems good works with synclient(1).  But this
>> 	# options is insecure.  I recommended "off" as default.
>> 	Option      "SHMConfig"             "on"
>>
>> 	# If you use circular touchpad, uncomment them.
>> 	#Option          "CircularPad"           "on"
>> 	#Option          "CircularScrolling"     "on"
>> 	#Option          "CircScrollDelta"       "0.5"
>> EndSection
>>
>> Section "Monitor"
>> 	Identifier   "Monitor0"
>> 	VendorName   "Monitor Vendor"
>> 	ModelName    "Monitor Model"
>> 	Option       "DPMS"
>> EndSection
>>
>> Section "Device"
>>         ### Available Driver options are:-
>>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>>         ### [arg]: arg optional
>>         #Option     "SWcursor"           	# [<bool>]
>>         #Option     "HWcursor"           	# [<bool>]
>>         #Option     "NoAccel"            	# [<bool>]
>>         #Option     "ShadowFB"           	# [<bool>]
>>         #Option     "UseFBDev"           	# [<bool>]
>>         #Option     "Rotate"             	# [<str>]
>>         #Option     "VideoKey"           	# <i>
>>         #Option     "FlatPanel"          	# [<bool>]
>>         #Option     "FPDither"           	# [<bool>]
>>         #Option     "CrtcNumber"         	# <i>
>>         #Option     "FPScale"            	# [<bool>]
>>         #Option     "FPTweak"            	# <i>
>>         #Option     "DualHead"           	# [<bool>]
>> 	Option      "UseEdidDpi" "false"
>> 	Option      "DPI" "96 x 96"
>> 	Identifier  "Card0"
>> 	Driver      "nouveau"
>> 	VendorName  "nVidia Corporation"
>> 	BoardName   "Quadro NVS 140M"
>> 	BusID       "PCI:1:0:0"
>> 	Option      "AccelMethod" "EXA"
>> 	Option      "EXANoComposite" "false"
>> 	Option      "FBTexPercent" "50"
>> 	Option      "MigrationHeuristic" "greedy"
>> 	Option      "DRI" "true
>> EndSection
>>
>> Section "DRI"
>> 	Mode 0666
>> EndSection
>>
>> Section "Screen"
>> 	Identifier "Screen0"
>> 	Device     "Card0"
>> 	Monitor    "Monitor0"
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     1
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     4
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     8
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     15
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     16
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     24
>> 		Modes     "1440x900"
>> 	EndSubSection
>> EndSection
>>
>> plain text document attachment (Xorg.0.nv.log)
>> X.Org X Server 1.6.0
>> Release Date: 2009-2-25
>> X Protocol Version 11, Revision 0
>> Build Operating System: FreeBSD 7.1-RELEASE-p4 amd64 
>> Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4 FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>> Build Date: 17 May 2009  09:21:33PM
>>  
>> 	Before reporting problems, check http://wiki.x.org
>> 	to make sure that you have the latest version.
>> Markers: (--) probed, (**) from config file, (==) default setting,
>> 	(++) from command line, (!!) notice, (II) informational,
>> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 17 21:37:41 2009
>> (++) Using config file: "/etc/X11/xorg.conf"
>> (==) ServerLayout "X.org Configured"
>> (**) |-->Screen "Screen0" (0)
>> (**) |   |-->Monitor "Monitor0"
>> (**) |   |-->Device "Card0"
>> (**) |-->Input Device "Synaptics_Touchpad"
>> (**) |-->Input Device "Keyboard0"
>> (**) Option "AllowEmptyInput"
>> (==) Automatically adding devices
>> (==) Automatically enabling devices
>> (**) FontPath set to:
>> 	/usr/local/lib/X11/fonts/misc/,
>> 	/usr/local/lib/X11/fonts/TTF/,
>> 	/usr/local/lib/X11/fonts/OTF,
>> 	/usr/local/lib/X11/fonts/Type1/,
>> 	/usr/local/lib/X11/fonts/100dpi/,
>> 	/usr/local/lib/X11/fonts/75dpi/,
>> 	/usr/local/lib/X11/fonts/URW/,
>> 	/usr/local/lib/X11/fonts/freefont/,
>> 	/usr/local/lib/X11/fonts/TrueType/,
>> 	/usr/local/lib/X11/fonts/bitstream-vera/,
>> 	/usr/local/lib/X11/fonts/cyrillic/,
>> 	/usr/local/lib/X11/fonts/encodings/,
>> 	/usr/local/lib/X11/fonts/local/,
>> 	/usr/local/lib/X11/fonts/util/,
>> 	/usr/local/lib/X11/fonts/misc/,
>> 	/usr/local/lib/X11/fonts/TTF/,
>> 	/usr/local/lib/X11/fonts/OTF,
>> 	/usr/local/lib/X11/fonts/Type1/,
>> 	/usr/local/lib/X11/fonts/100dpi/,
>> 	/usr/local/lib/X11/fonts/75dpi/,
>> 	built-ins
>> (**) ModulePath set to "/usr/local/lib/xorg/modules"
>> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
>> (WW) Disabling Keyboard0
>> (II) Loader magic: 0x3b20
>> (II) Module ABI versions:
>> 	X.Org ANSI C Emulation: 0.4
>> 	X.Org Video Driver: 5.0
>> 	X.Org XInput driver : 4.0
>> 	X.Org Server Extension : 2.0
>> (II) Loader running on freebsd
>> (--) Using syscons driver with X support (version 2.0)
>> (--) using VT number 9
>>
>> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @ 0x????????/65536
>> (II) System resource ranges:
>> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>> (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "record" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
>> (II) "dri2" will be loaded by default.
>> (II) LoadModule: "extmod"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
>> (II) Module extmod: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	Module class: X.Org Server Extension
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension MIT-SCREEN-SAVER
>> (II) Loading extension XFree86-VidModeExtension
>> (II) Loading extension XFree86-DGA
>> (II) Loading extension DPMS
>> (II) Loading extension XVideo
>> (II) Loading extension XVideo-MotionCompensation
>> (II) Loading extension X-Resource
>> (II) LoadModule: "record"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
>> (II) Module record: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.13.0
>> 	Module class: X.Org Server Extension
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension RECORD
>> (II) LoadModule: "dbe"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
>> (II) Module dbe: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	Module class: X.Org Server Extension
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension DOUBLE-BUFFER
>> (II) LoadModule: "glx"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
>> (II) Module glx: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	ABI class: X.Org Server Extension, version 2.0
>> (==) AIGLX disabled
>> (II) Loading extension GLX
>> (II) LoadModule: "xtrap"
>> (WW) Warning, couldn't open module xtrap
>> (II) UnloadModule: "xtrap"
>> (EE) Failed to load module "xtrap" (module does not exist, 0)
>> (II) LoadModule: "dri"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
>> (II) Module dri: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension XFree86-DRI
>> (II) LoadModule: "freetype"
>> (WW) Warning, couldn't open module freetype
>> (II) UnloadModule: "freetype"
>> (EE) Failed to load module "freetype" (module does not exist, 0)
>> (II) LoadModule: "type1"
>> (WW) Warning, couldn't open module type1
>> (II) UnloadModule: "type1"
>> (EE) Failed to load module "type1" (module does not exist, 0)
>> (II) LoadModule: "synaptics"
>> (II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
>> (II) Module synaptics: vendor="X.Org Foundation"
>> 	compiled for 1.6.1, module version = 1.1.0
>> 	Module class: X.Org XInput Driver
>> 	ABI class: X.Org XInput driver, version 4.0
>> (II) LoadModule: "dri2"
>> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
>> (II) Module dri2: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	ABI class: X.Org Server Extension, version 2.0
>> (II) Loading extension DRI2
>> (II) LoadModule: "nv"
>> (II) Loading /usr/local/lib/xorg/modules/drivers//nv_drv.so
>> (II) Module nv: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 2.1.13
>> 	Module class: X.Org Video Driver
>> 	ABI class: X.Org Video Driver, version 5.0
>> (II) LoadModule: "synaptics"
>> (II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
>> (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
>> 	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
>> 	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
>> 	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
>> 	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
>> 	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
>> 	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
>> 	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
>> 	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
>> 	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
>> 	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
>> 	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
>> 	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
>> 	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
>> 	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
>> 	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
>> 	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
>> 	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
>> 	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
>> 	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
>> 	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
>> 	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
>> 	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
>> 	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
>> 	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
>> 	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
>> 	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
>> 	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
>> 	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
>> 	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
>> 	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
>> 	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
>> 	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
>> 	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
>> 	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
>> 	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
>> 	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
>> 	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
>> 	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
>> 	GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
>> 	Quadro FX 540, GeForce 6200, GeForce 6500,
>> 	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
>> 	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
>> 	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
>> 	GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
>> 	GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
>> 	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
>> 	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
>> 	GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
>> 	GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
>> 	GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
>> 	GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
>> 	GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
>> 	Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
>> 	GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
>> 	GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
>> 	Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
>> 	Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
>> 	GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
>> 	GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
>> 	GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
>> 	GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
>> 	GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
>> 	Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
>> 	GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
>> 	GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
>> 	GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
>> 	GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
>> 	GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
>> 	GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
>> 	GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
>> 	GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
>> 	GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro FX 3600M,
>> 	GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
>> 	GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
>> 	GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
>> 	GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS,
>> 	GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M
>> (II) Primary Device is: PCI 01@00:00:0
>> (--) NV: Found NVIDIA Quadro NVS 140M at 01@00:00:0
>> (II) resource ranges after probing:
>> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>> (II) Loading sub module "int10"
>> (II) LoadModule: "int10"
>> (II) Loading /usr/local/lib/xorg/modules//libint10.so
>> (II) Module int10: vendor="X.Org Foundation"
>> 	compiled for 1.6.0, module version = 1.0.0
>> 	ABI class: X.Org Video Driver, version 5.0
>> (II) NV(0): Initializing int10
>> (==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
>> (==) NV(0): Write-combining range (0xc0000,0x40000) was already clear
>> (II) NV(0): Primary V_BIOS segment is: 0xc000
>> (==) NV(0): Write-combining range (0x0,0x1000) was already clear
>> (--) NV(0): Console is VGA mode 0x3
>> (==) NV(0): Depth 24, (--) framebuffer bpp 32
>> (==) NV(0): RGB weight 888
>> (==) NV(0): Default visual is TrueColor
>> (==) NV(0): Using hardware cursor
>> (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
>> (EE) NV(0): Failed to map MMIO registers: No such file or directory
>> (==) NV(0): Write-combining range (0x0,0x1000) was already clear
>> (II) UnloadModule: "nv"
>> (II) UnloadModule: "int10"
>> (II) Unloading /usr/local/lib/xorg/modules//libint10.so
>> (EE) Screen(s) found, but none have a usable configuration.
>>
>> Fatal server error:
>> no screens found
>>
>> Please consult the The X.Org Foundation support 
>> 	 at http://wiki.x.org
>>  for help. 
>> Please also check the log file at "/var/log/Xorg.0.log" for additional information.
>>
>> _______________________________________________
>> freebsd-x11@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
>> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
From rnoland at FreeBSD.org  Wed May 27 16:10:50 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Wed May 27 16:11:03 2009
Subject: Problems with libpciaccess-0.10.6
In-Reply-To: <4A1D6445.1080707@irbisnet.com>
References: <4A1D5FDD.9050306@irbisnet.com>
	<1243439705.2926.2387.camel@balrog.2hip.net>
	<4A1D6445.1080707@irbisnet.com>
Message-ID: <1243440584.2926.2403.camel@balrog.2hip.net>

On Wed, 2009-05-27 at 12:03 -0400, Andriy Bakay wrote:
> Unfortunately, X server did not store core dump. If you give me options 
> which will force X server to make core dump then I can try to reproduce 
> it again.

       Option "NoTrapSignals"  "boolean"
              This prevents the Xorg server from trapping  a  range  of
unex-
              pected  fatal  signals  and  exiting cleanly.  Instead,
the Xorg
              server will die and drop core where  the  fault  occurred.
The
              default  behaviour  is  for the Xorg server to exit
cleanly, but
              still drop a core file.  In general you never want to  use
this
              option  unless you are debugging an Xorg server problem
and know
              how to deal with the consequences.

robert.

> Robert Noland wrote:
> > On Wed, 2009-05-27 at 11:44 -0400, Andriy Bakay wrote:
> >> Hi X11 Team,
> >>
> >> Recently I tried to upgrade to 'libpciaccess-0.10.6' port on my laptop: 
> >> ThinkPad T61, FreeBSD 7.1 amd64, nVidia Quadro NVS 140M. And my X 
> >> (xorg-server-1.6.0,1) server crashed during startup (see attached logs). 
> >> I tried 'xorg-server-1.6.1' and two different nVidia drivers 'nv' and 
> >> 'nouveau' same crash, but with different log entries. After I downgrade 
> >> to 'libpciaccess-0.10.5_6' port both drivers working fine. I attached 
> >> the X server logs and configs for both nVidia drivers:
> > 
> > Hrm, I really didn't think that much changed with 0.10.6.  Any chance
> > you can get a backtrace from the X server?
> > 
> > robert.
> > 
> >> nv:      Xorg.0.nv.log, xorg.nv.conf
> >> nouveau: Xorg.0.nouveau.log, xorg.nouveau.conf
> >>
> >> Please, advise.
> >>
> >> Thanks,
> >> Andriy
> >> plain text document attachment (Xorg.0.nouveau.log)
> >> X.Org X Server 1.6.0
> >> Release Date: 2009-2-25
> >> X Protocol Version 11, Revision 0
> >> Build Operating System: FreeBSD 7.0-RELEASE amd64 
> >> Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4 FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
> >> Build Date: 12 April 2009  03:12:50PM
> >>  
> >> 	Before reporting problems, check http://wiki.x.org
> >> 	to make sure that you have the latest version.
> >> Markers: (--) probed, (**) from config file, (==) default setting,
> >> 	(++) from command line, (!!) notice, (II) informational,
> >> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> >> (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 23 21:47:12 2009
> >> (==) Using config file: "/etc/X11/xorg.conf"
> >> (==) ServerLayout "X.org Configured"
> >> (**) |-->Screen "Screen0" (0)
> >> (**) |   |-->Monitor "Monitor0"
> >> (**) |   |-->Device "Card0"
> >> (**) |-->Input Device "Synaptics_Touchpad"
> >> (**) |-->Input Device "Keyboard0"
> >> (**) Option "DontZap" "Off"
> >> (**) Option "AIGLX" "true"
> >> (==) Automatically adding devices
> >> (==) Automatically enabling devices
> >> (**) FontPath set to:
> >> 	/usr/local/lib/X11/fonts/misc/,
> >> 	/usr/local/lib/X11/fonts/TTF/,
> >> 	/usr/local/lib/X11/fonts/OTF,
> >> 	/usr/local/lib/X11/fonts/Type1/,
> >> 	/usr/local/lib/X11/fonts/100dpi/,
> >> 	/usr/local/lib/X11/fonts/75dpi/,
> >> 	/usr/local/lib/X11/fonts/URW/,
> >> 	/usr/local/lib/X11/fonts/freefont/,
> >> 	/usr/local/lib/X11/fonts/TrueType/,
> >> 	/usr/local/lib/X11/fonts/bitstream-vera/,
> >> 	/usr/local/lib/X11/fonts/cyrillic/,
> >> 	/usr/local/lib/X11/fonts/misc/,
> >> 	/usr/local/lib/X11/fonts/TTF/,
> >> 	/usr/local/lib/X11/fonts/OTF,
> >> 	/usr/local/lib/X11/fonts/Type1/,
> >> 	/usr/local/lib/X11/fonts/100dpi/,
> >> 	/usr/local/lib/X11/fonts/75dpi/,
> >> 	built-ins
> >> (**) ModulePath set to "/usr/local/lib/xorg/modules"
> >> (**) Extension "Composite" is enabled
> >> (**) Extension "XVideo" is enabled
> >> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
> >> (WW) Disabling Keyboard0
> >> (II) Loader magic: 0xb20
> >> (II) Module ABI versions:
> >> 	X.Org ANSI C Emulation: 0.4
> >> 	X.Org Video Driver: 5.0
> >> 	X.Org XInput driver : 4.0
> >> 	X.Org Server Extension : 2.0
> >> (II) Loader running on freebsd
> >> (--) Using syscons driver with X support (version 2.0)
> >> (--) using VT number 9
> >>
> >> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @ 0x????????/65536
> >> (II) System resource ranges:
> >> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> >> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
> >> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> >> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> >> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
> >> (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "record" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) LoadModule: "extmod"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
> >> (II) Module extmod: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	Module class: X.Org Server Extension
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension MIT-SCREEN-SAVER
> >> (II) Loading extension XFree86-VidModeExtension
> >> (II) Loading extension XFree86-DGA
> >> (II) Loading extension DPMS
> >> (II) Loading extension XVideo
> >> (II) Loading extension XVideo-MotionCompensation
> >> (II) Loading extension X-Resource
> >> (II) LoadModule: "record"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
> >> (II) Module record: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.13.0
> >> 	Module class: X.Org Server Extension
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension RECORD
> >> (II) LoadModule: "dbe"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
> >> (II) Module dbe: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	Module class: X.Org Server Extension
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension DOUBLE-BUFFER
> >> (II) LoadModule: "glx"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
> >> (II) Module glx: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (**) AIGLX enabled
> >> (II) Loading extension GLX
> >> (II) LoadModule: "dri"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
> >> (II) Module dri: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension XFree86-DRI
> >> (II) LoadModule: "dri2"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
> >> (II) Module dri2: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension DRI2
> >> (II) LoadModule: "synaptics"
> >> (II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
> >> (II) Module synaptics: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 0.99.3
> >> 	Module class: X.Org XInput Driver
> >> 	ABI class: X.Org XInput driver, version 4.0
> >> (II) LoadModule: "nouveau"
> >> (II) Loading /usr/local/lib/xorg/modules/drivers//nouveau_drv.so
> >> (II) Module nouveau: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 0.0.10
> >> 	Module class: X.Org Video Driver
> >> 	ABI class: X.Org Video Driver, version 5.0
> >> (II) LoadModule: "synaptics"
> >> (II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
> >> (II) NOUVEAU driver 20090514.9656762
> >> (II) NOUVEAU driver for NVIDIA chipset families :
> >> 	RIVA TNT    (NV04)
> >> 	RIVA TNT2   (NV05)
> >> 	GeForce 256 (NV10)
> >> 	GeForce 2   (NV11, NV15)
> >> 	GeForce 4MX (NV17, NV18)
> >> 	GeForce 3   (NV20)
> >> 	GeForce 4Ti (NV25, NV28)
> >> 	GeForce FX  (NV3x)
> >> 	GeForce 6   (NV4x)
> >> 	GeForce 7   (G7x)
> >> 	GeForce 8   (G8x)
> >> (II) Primary Device is: PCI 01@00:00:0
> >>
> >> Fatal server error:
> >> Caught signal 11.  Server aborting
> >>
> >>
> >> Please consult the The X.Org Foundation support 
> >> 	 at http://wiki.x.org
> >>  for help. 
> >> Please also check the log file at "/var/log/Xorg.0.log" for additional information.
> >>
> >> plain text document attachment (xorg.nv.conf)
> >> Section "ServerLayout"
> >> 	Identifier     "X.org Configured"
> >> 	Screen      0  "Screen0" 0 0
> >> #	InputDevice    "Mouse0" "CorePointer"
> >> 	InputDevice    "Synaptics_Touchpad" "CorePointer"
> >> 	InputDevice    "Keyboard0" "CoreKeyboard"
> >> 	Option         "DontZap" "Off"
> >> 	Option         "AIGLX" "true"
> >> EndSection
> >>
> >> Section "Extensions"
> >> 	Option       "Composite" "Enable"
> >> 	Option       "XVideo" "Enable"
> >> EndSection
> >>
> >> Section "Files"
> >> 	ModulePath   "/usr/local/lib/xorg/modules"
> >> 	FontPath     "/usr/local/lib/X11/fonts/misc/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/TTF/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/OTF"
> >> 	FontPath     "/usr/local/lib/X11/fonts/Type1/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/URW/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/freefont/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
> >> EndSection
> >>
> >> Section "Module"
> >> 	Load  "extmod"
> >> 	Load  "record"
> >> 	Load  "dbe"
> >> 	Load  "glx"
> >> 	Load  "dri"
> >> 	Load  "dri2"
> >> 	Load  "synaptics"
> >> EndSection
> >>
> >> #Section "ServerFlags"
> >> #	Option      "AllowEmptyInput"
> >> #EndSection
> >>
> >> Section "InputDevice"
> >> 	Identifier  "Keyboard0"
> >> 	Driver      "kbd"
> >> EndSection
> >>
> >> #Section "InputDevice"
> >> #	Identifier  "Mouse0"
> >> #	Driver      "mouse"
> >> #	Option	    "Protocol" "auto"
> >> #	Option	    "Device" "/dev/sysmouse"
> >> #	Option	    "ZAxisMapping" "4 5 6 7"
> >> #EndSection
> >>
> >> Section "InputDevice"
> >> 	Identifier  "Synaptics_Touchpad"
> >> 	Driver      "synaptics"
> >>
> >> 	Option      "Device"                "/dev/psm0"
> >> 	Option      "Protocol"              "psm"
> >>
> >> 	Option      "LeftEdge"              "1400"
> >> 	Option      "RightEdge"             "5600"
> >> 	Option      "TopEdge"               "1400"
> >> 	Option      "BottomEdge"            "4700"
> >>
> >> 	Option      "FingerLow"             "25"
> >> 	Option      "FingerHigh"            "30"
> >>
> >> 	Option      "MaxTapTime"            "180"
> >> 	Option      "MaxTapMove"            "220"
> >>
> >> 	Option      "VertScrollDelta"       "100"
> >> 	Option      "HorizScrollDelta"      "100"
> >>
> >> 	Option      "MinSpeed"              "0.1"
> >> 	Option      "MaxSpeed"              "0.25"
> >> 	Option      "AccelFactor"           "0.0010"
> >> 	Option      "FastTaps"              "off"
> >>
> >> 	Option      "ScrollButtonRepeat"    "100"
> >> 	Option      "UpDownScrolling"       "on"
> >> 	Option      "UpDownRepeat"          "on"
> >> 	Option      "LeftRightScrolling"    "on"
> >> 	Option      "LeftRightRepeat"       "on"
> >>
> >> 	Option      "TapButton1"            "0"
> >> 	Option      "TapButton2"            "0"
> >> 	Option      "TapButton3"            "0"
> >>
> >> 	# "SHMConfig on" seems good works with synclient(1).  But this
> >> 	# options is insecure.  I recommended "off" as default.
> >> 	Option      "SHMConfig"             "on"
> >>
> >> 	# If you use circular touchpad, uncomment them.
> >> 	#Option          "CircularPad"           "on"
> >> 	#Option          "CircularScrolling"     "on"
> >> 	#Option          "CircScrollDelta"       "0.5"
> >> EndSection
> >>
> >> Section "Monitor"
> >> 	Identifier   "Monitor0"
> >> 	VendorName   "Monitor Vendor"
> >> 	ModelName    "Monitor Model"
> >> 	Option       "DPMS"
> >> EndSection
> >>
> >> Section "Device"
> >>         ### Available Driver options are:-
> >>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> >>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> >>         ### [arg]: arg optional
> >>         #Option     "SWcursor"           	# [<bool>]
> >>         #Option     "HWcursor"           	# [<bool>]
> >>         #Option     "NoAccel"            	# [<bool>]
> >>         #Option     "ShadowFB"           	# [<bool>]
> >>         #Option     "UseFBDev"           	# [<bool>]
> >>         #Option     "Rotate"             	# [<str>]
> >>         #Option     "VideoKey"           	# <i>
> >>         #Option     "FlatPanel"          	# [<bool>]
> >>         #Option     "FPDither"           	# [<bool>]
> >>         #Option     "CrtcNumber"         	# <i>
> >>         #Option     "FPScale"            	# [<bool>]
> >>         #Option     "FPTweak"            	# <i>
> >>         #Option     "DualHead"           	# [<bool>]
> >> 	Option      "UseEdidDpi" "false"
> >> 	Option      "DPI" "96 x 96"
> >> 	Identifier  "Card0"
> >> 	Driver      "nv"
> >> 	VendorName  "nVidia Corporation"
> >> 	BoardName   "Quadro NVS 140M"
> >> 	BusID       "PCI:1:0:0"
> >> EndSection
> >>
> >> Section "DRI"
> >> 	Mode 0666
> >> EndSection
> >>
> >> Section "Screen"
> >> 	Identifier "Screen0"
> >> 	Device     "Card0"
> >> 	Monitor    "Monitor0"
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     1
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     4
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     8
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     15
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     16
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     24
> >> 		Modes     "1440x900"
> >> 	EndSubSection
> >> EndSection
> >>
> >> plain text document attachment (xorg.nouveau.conf)
> >> Section "ServerLayout"
> >> 	Identifier     "X.org Configured"
> >> 	Screen      0  "Screen0" 0 0
> >> #	InputDevice    "Mouse0" "CorePointer"
> >> 	InputDevice    "Synaptics_Touchpad" "CorePointer"
> >> 	InputDevice    "Keyboard0" "CoreKeyboard"
> >> 	Option         "DontZap" "Off"
> >> 	Option         "AIGLX" "true"
> >> EndSection
> >>
> >> Section "Extensions"
> >> 	Option       "Composite" "Enable"
> >> 	Option       "XVideo" "Enable"
> >> EndSection
> >>
> >> Section "Files"
> >> 	ModulePath   "/usr/local/lib/xorg/modules"
> >> 	FontPath     "/usr/local/lib/X11/fonts/misc/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/TTF/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/OTF"
> >> 	FontPath     "/usr/local/lib/X11/fonts/Type1/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/URW/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/freefont/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
> >> EndSection
> >>
> >> Section "Module"
> >> 	Load  "extmod"
> >> 	Load  "record"
> >> 	Load  "dbe"
> >> 	Load  "glx"
> >> 	Load  "dri"
> >> 	Load  "dri2"
> >> 	Load  "synaptics"
> >> EndSection
> >>
> >> #Section "ServerFlags"
> >> #	Option      "AllowEmptyInput"
> >> #EndSection
> >>
> >> Section "InputDevice"
> >> 	Identifier  "Keyboard0"
> >> 	Driver      "kbd"
> >> EndSection
> >>
> >> #Section "InputDevice"
> >> #	Identifier  "Mouse0"
> >> #	Driver      "mouse"
> >> #	Option	    "Protocol" "auto"
> >> #	Option	    "Device" "/dev/sysmouse"
> >> #	Option	    "ZAxisMapping" "4 5 6 7"
> >> #EndSection
> >>
> >> Section "InputDevice"
> >> 	Identifier  "Synaptics_Touchpad"
> >> 	Driver      "synaptics"
> >>
> >> 	Option      "Device"                "/dev/psm0"
> >> 	Option      "Protocol"              "psm"
> >>
> >> 	Option      "LeftEdge"              "1400"
> >> 	Option      "RightEdge"             "5600"
> >> 	Option      "TopEdge"               "1400"
> >> 	Option      "BottomEdge"            "4700"
> >>
> >> 	Option      "FingerLow"             "25"
> >> 	Option      "FingerHigh"            "30"
> >>
> >> 	Option      "MaxTapTime"            "180"
> >> 	Option      "MaxTapMove"            "220"
> >>
> >> 	Option      "VertScrollDelta"       "100"
> >> 	Option      "HorizScrollDelta"      "100"
> >>
> >> 	Option      "MinSpeed"              "0.25"
> >> 	Option      "MaxSpeed"              "0.5"
> >> 	Option      "AccelFactor"           "0.0010"
> >> 	Option      "FastTaps"              "off"
> >>
> >> 	Option      "ScrollButtonRepeat"    "100"
> >> 	Option      "UpDownScrolling"       "on"
> >> 	Option      "UpDownRepeat"          "on"
> >> 	Option      "LeftRightScrolling"    "on"
> >> 	Option      "LeftRightRepeat"       "on"
> >>
> >> 	Option      "TapButton1"            "0"
> >> 	Option      "TapButton2"            "0"
> >> 	Option      "TapButton3"            "0"
> >>
> >> 	# "SHMConfig on" seems good works with synclient(1).  But this
> >> 	# options is insecure.  I recommended "off" as default.
> >> 	Option      "SHMConfig"             "on"
> >>
> >> 	# If you use circular touchpad, uncomment them.
> >> 	#Option          "CircularPad"           "on"
> >> 	#Option          "CircularScrolling"     "on"
> >> 	#Option          "CircScrollDelta"       "0.5"
> >> EndSection
> >>
> >> Section "Monitor"
> >> 	Identifier   "Monitor0"
> >> 	VendorName   "Monitor Vendor"
> >> 	ModelName    "Monitor Model"
> >> 	Option       "DPMS"
> >> EndSection
> >>
> >> Section "Device"
> >>         ### Available Driver options are:-
> >>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> >>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> >>         ### [arg]: arg optional
> >>         #Option     "SWcursor"           	# [<bool>]
> >>         #Option     "HWcursor"           	# [<bool>]
> >>         #Option     "NoAccel"            	# [<bool>]
> >>         #Option     "ShadowFB"           	# [<bool>]
> >>         #Option     "UseFBDev"           	# [<bool>]
> >>         #Option     "Rotate"             	# [<str>]
> >>         #Option     "VideoKey"           	# <i>
> >>         #Option     "FlatPanel"          	# [<bool>]
> >>         #Option     "FPDither"           	# [<bool>]
> >>         #Option     "CrtcNumber"         	# <i>
> >>         #Option     "FPScale"            	# [<bool>]
> >>         #Option     "FPTweak"            	# <i>
> >>         #Option     "DualHead"           	# [<bool>]
> >> 	Option      "UseEdidDpi" "false"
> >> 	Option      "DPI" "96 x 96"
> >> 	Identifier  "Card0"
> >> 	Driver      "nouveau"
> >> 	VendorName  "nVidia Corporation"
> >> 	BoardName   "Quadro NVS 140M"
> >> 	BusID       "PCI:1:0:0"
> >> 	Option      "AccelMethod" "EXA"
> >> 	Option      "EXANoComposite" "false"
> >> 	Option      "FBTexPercent" "50"
> >> 	Option      "MigrationHeuristic" "greedy"
> >> 	Option      "DRI" "true
> >> EndSection
> >>
> >> Section "DRI"
> >> 	Mode 0666
> >> EndSection
> >>
> >> Section "Screen"
> >> 	Identifier "Screen0"
> >> 	Device     "Card0"
> >> 	Monitor    "Monitor0"
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     1
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     4
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     8
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     15
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     16
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     24
> >> 		Modes     "1440x900"
> >> 	EndSubSection
> >> EndSection
> >>
> >> plain text document attachment (Xorg.0.nv.log)
> >> X.Org X Server 1.6.0
> >> Release Date: 2009-2-25
> >> X Protocol Version 11, Revision 0
> >> Build Operating System: FreeBSD 7.1-RELEASE-p4 amd64 
> >> Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4 FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
> >> Build Date: 17 May 2009  09:21:33PM
> >>  
> >> 	Before reporting problems, check http://wiki.x.org
> >> 	to make sure that you have the latest version.
> >> Markers: (--) probed, (**) from config file, (==) default setting,
> >> 	(++) from command line, (!!) notice, (II) informational,
> >> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> >> (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 17 21:37:41 2009
> >> (++) Using config file: "/etc/X11/xorg.conf"
> >> (==) ServerLayout "X.org Configured"
> >> (**) |-->Screen "Screen0" (0)
> >> (**) |   |-->Monitor "Monitor0"
> >> (**) |   |-->Device "Card0"
> >> (**) |-->Input Device "Synaptics_Touchpad"
> >> (**) |-->Input Device "Keyboard0"
> >> (**) Option "AllowEmptyInput"
> >> (==) Automatically adding devices
> >> (==) Automatically enabling devices
> >> (**) FontPath set to:
> >> 	/usr/local/lib/X11/fonts/misc/,
> >> 	/usr/local/lib/X11/fonts/TTF/,
> >> 	/usr/local/lib/X11/fonts/OTF,
> >> 	/usr/local/lib/X11/fonts/Type1/,
> >> 	/usr/local/lib/X11/fonts/100dpi/,
> >> 	/usr/local/lib/X11/fonts/75dpi/,
> >> 	/usr/local/lib/X11/fonts/URW/,
> >> 	/usr/local/lib/X11/fonts/freefont/,
> >> 	/usr/local/lib/X11/fonts/TrueType/,
> >> 	/usr/local/lib/X11/fonts/bitstream-vera/,
> >> 	/usr/local/lib/X11/fonts/cyrillic/,
> >> 	/usr/local/lib/X11/fonts/encodings/,
> >> 	/usr/local/lib/X11/fonts/local/,
> >> 	/usr/local/lib/X11/fonts/util/,
> >> 	/usr/local/lib/X11/fonts/misc/,
> >> 	/usr/local/lib/X11/fonts/TTF/,
> >> 	/usr/local/lib/X11/fonts/OTF,
> >> 	/usr/local/lib/X11/fonts/Type1/,
> >> 	/usr/local/lib/X11/fonts/100dpi/,
> >> 	/usr/local/lib/X11/fonts/75dpi/,
> >> 	built-ins
> >> (**) ModulePath set to "/usr/local/lib/xorg/modules"
> >> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
> >> (WW) Disabling Keyboard0
> >> (II) Loader magic: 0x3b20
> >> (II) Module ABI versions:
> >> 	X.Org ANSI C Emulation: 0.4
> >> 	X.Org Video Driver: 5.0
> >> 	X.Org XInput driver : 4.0
> >> 	X.Org Server Extension : 2.0
> >> (II) Loader running on freebsd
> >> (--) Using syscons driver with X support (version 2.0)
> >> (--) using VT number 9
> >>
> >> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @ 0x????????/65536
> >> (II) System resource ranges:
> >> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> >> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
> >> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> >> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> >> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
> >> (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "record" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "dri2" will be loaded by default.
> >> (II) LoadModule: "extmod"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
> >> (II) Module extmod: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	Module class: X.Org Server Extension
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension MIT-SCREEN-SAVER
> >> (II) Loading extension XFree86-VidModeExtension
> >> (II) Loading extension XFree86-DGA
> >> (II) Loading extension DPMS
> >> (II) Loading extension XVideo
> >> (II) Loading extension XVideo-MotionCompensation
> >> (II) Loading extension X-Resource
> >> (II) LoadModule: "record"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
> >> (II) Module record: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.13.0
> >> 	Module class: X.Org Server Extension
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension RECORD
> >> (II) LoadModule: "dbe"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
> >> (II) Module dbe: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	Module class: X.Org Server Extension
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension DOUBLE-BUFFER
> >> (II) LoadModule: "glx"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
> >> (II) Module glx: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (==) AIGLX disabled
> >> (II) Loading extension GLX
> >> (II) LoadModule: "xtrap"
> >> (WW) Warning, couldn't open module xtrap
> >> (II) UnloadModule: "xtrap"
> >> (EE) Failed to load module "xtrap" (module does not exist, 0)
> >> (II) LoadModule: "dri"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
> >> (II) Module dri: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension XFree86-DRI
> >> (II) LoadModule: "freetype"
> >> (WW) Warning, couldn't open module freetype
> >> (II) UnloadModule: "freetype"
> >> (EE) Failed to load module "freetype" (module does not exist, 0)
> >> (II) LoadModule: "type1"
> >> (WW) Warning, couldn't open module type1
> >> (II) UnloadModule: "type1"
> >> (EE) Failed to load module "type1" (module does not exist, 0)
> >> (II) LoadModule: "synaptics"
> >> (II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
> >> (II) Module synaptics: vendor="X.Org Foundation"
> >> 	compiled for 1.6.1, module version = 1.1.0
> >> 	Module class: X.Org XInput Driver
> >> 	ABI class: X.Org XInput driver, version 4.0
> >> (II) LoadModule: "dri2"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
> >> (II) Module dri2: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension DRI2
> >> (II) LoadModule: "nv"
> >> (II) Loading /usr/local/lib/xorg/modules/drivers//nv_drv.so
> >> (II) Module nv: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 2.1.13
> >> 	Module class: X.Org Video Driver
> >> 	ABI class: X.Org Video Driver, version 5.0
> >> (II) LoadModule: "synaptics"
> >> (II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
> >> (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
> >> 	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
> >> 	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
> >> 	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
> >> 	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
> >> 	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
> >> 	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
> >> 	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
> >> 	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
> >> 	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
> >> 	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
> >> 	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
> >> 	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
> >> 	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
> >> 	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
> >> 	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
> >> 	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
> >> 	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
> >> 	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
> >> 	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
> >> 	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
> >> 	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
> >> 	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
> >> 	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
> >> 	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
> >> 	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
> >> 	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
> >> 	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
> >> 	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
> >> 	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
> >> 	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
> >> 	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
> >> 	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
> >> 	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
> >> 	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
> >> 	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
> >> 	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
> >> 	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
> >> 	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
> >> 	GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
> >> 	Quadro FX 540, GeForce 6200, GeForce 6500,
> >> 	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
> >> 	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
> >> 	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
> >> 	GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
> >> 	GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
> >> 	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
> >> 	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
> >> 	GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
> >> 	GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
> >> 	GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
> >> 	GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
> >> 	GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
> >> 	Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
> >> 	GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
> >> 	GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
> >> 	Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
> >> 	Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
> >> 	GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
> >> 	GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
> >> 	GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
> >> 	GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
> >> 	GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
> >> 	Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
> >> 	GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
> >> 	GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
> >> 	GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
> >> 	GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
> >> 	GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
> >> 	GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
> >> 	GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
> >> 	GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
> >> 	GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro FX 3600M,
> >> 	GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
> >> 	GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
> >> 	GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
> >> 	GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS,
> >> 	GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M
> >> (II) Primary Device is: PCI 01@00:00:0
> >> (--) NV: Found NVIDIA Quadro NVS 140M at 01@00:00:0
> >> (II) resource ranges after probing:
> >> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> >> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
> >> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> >> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> >> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
> >> (II) Loading sub module "int10"
> >> (II) LoadModule: "int10"
> >> (II) Loading /usr/local/lib/xorg/modules//libint10.so
> >> (II) Module int10: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	ABI class: X.Org Video Driver, version 5.0
> >> (II) NV(0): Initializing int10
> >> (==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
> >> (==) NV(0): Write-combining range (0xc0000,0x40000) was already clear
> >> (II) NV(0): Primary V_BIOS segment is: 0xc000
> >> (==) NV(0): Write-combining range (0x0,0x1000) was already clear
> >> (--) NV(0): Console is VGA mode 0x3
> >> (==) NV(0): Depth 24, (--) framebuffer bpp 32
> >> (==) NV(0): RGB weight 888
> >> (==) NV(0): Default visual is TrueColor
> >> (==) NV(0): Using hardware cursor
> >> (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
> >> (EE) NV(0): Failed to map MMIO registers: No such file or directory
> >> (==) NV(0): Write-combining range (0x0,0x1000) was already clear
> >> (II) UnloadModule: "nv"
> >> (II) UnloadModule: "int10"
> >> (II) Unloading /usr/local/lib/xorg/modules//libint10.so
> >> (EE) Screen(s) found, but none have a usable configuration.
> >>
> >> Fatal server error:
> >> no screens found
> >>
> >> Please consult the The X.Org Foundation support 
> >> 	 at http://wiki.x.org
> >>  for help. 
> >> Please also check the log file at "/var/log/Xorg.0.log" for additional information.
> >>
> >> _______________________________________________
> >> freebsd-x11@freebsd.org mailing list
> >> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> >> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090527/6ebed481/attachment.pgp
From rnoland at FreeBSD.org  Wed May 27 16:10:50 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Wed May 27 16:11:04 2009
Subject: Problems with libpciaccess-0.10.6
In-Reply-To: <4A1D6445.1080707@irbisnet.com>
References: <4A1D5FDD.9050306@irbisnet.com>
	<1243439705.2926.2387.camel@balrog.2hip.net>
	<4A1D6445.1080707@irbisnet.com>
Message-ID: <1243440584.2926.2403.camel@balrog.2hip.net>

On Wed, 2009-05-27 at 12:03 -0400, Andriy Bakay wrote:
> Unfortunately, X server did not store core dump. If you give me options 
> which will force X server to make core dump then I can try to reproduce 
> it again.

       Option "NoTrapSignals"  "boolean"
              This prevents the Xorg server from trapping  a  range  of
unex-
              pected  fatal  signals  and  exiting cleanly.  Instead,
the Xorg
              server will die and drop core where  the  fault  occurred.
The
              default  behaviour  is  for the Xorg server to exit
cleanly, but
              still drop a core file.  In general you never want to  use
this
              option  unless you are debugging an Xorg server problem
and know
              how to deal with the consequences.

robert.

> Robert Noland wrote:
> > On Wed, 2009-05-27 at 11:44 -0400, Andriy Bakay wrote:
> >> Hi X11 Team,
> >>
> >> Recently I tried to upgrade to 'libpciaccess-0.10.6' port on my laptop: 
> >> ThinkPad T61, FreeBSD 7.1 amd64, nVidia Quadro NVS 140M. And my X 
> >> (xorg-server-1.6.0,1) server crashed during startup (see attached logs). 
> >> I tried 'xorg-server-1.6.1' and two different nVidia drivers 'nv' and 
> >> 'nouveau' same crash, but with different log entries. After I downgrade 
> >> to 'libpciaccess-0.10.5_6' port both drivers working fine. I attached 
> >> the X server logs and configs for both nVidia drivers:
> > 
> > Hrm, I really didn't think that much changed with 0.10.6.  Any chance
> > you can get a backtrace from the X server?
> > 
> > robert.
> > 
> >> nv:      Xorg.0.nv.log, xorg.nv.conf
> >> nouveau: Xorg.0.nouveau.log, xorg.nouveau.conf
> >>
> >> Please, advise.
> >>
> >> Thanks,
> >> Andriy
> >> plain text document attachment (Xorg.0.nouveau.log)
> >> X.Org X Server 1.6.0
> >> Release Date: 2009-2-25
> >> X Protocol Version 11, Revision 0
> >> Build Operating System: FreeBSD 7.0-RELEASE amd64 
> >> Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4 FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
> >> Build Date: 12 April 2009  03:12:50PM
> >>  
> >> 	Before reporting problems, check http://wiki.x.org
> >> 	to make sure that you have the latest version.
> >> Markers: (--) probed, (**) from config file, (==) default setting,
> >> 	(++) from command line, (!!) notice, (II) informational,
> >> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> >> (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 23 21:47:12 2009
> >> (==) Using config file: "/etc/X11/xorg.conf"
> >> (==) ServerLayout "X.org Configured"
> >> (**) |-->Screen "Screen0" (0)
> >> (**) |   |-->Monitor "Monitor0"
> >> (**) |   |-->Device "Card0"
> >> (**) |-->Input Device "Synaptics_Touchpad"
> >> (**) |-->Input Device "Keyboard0"
> >> (**) Option "DontZap" "Off"
> >> (**) Option "AIGLX" "true"
> >> (==) Automatically adding devices
> >> (==) Automatically enabling devices
> >> (**) FontPath set to:
> >> 	/usr/local/lib/X11/fonts/misc/,
> >> 	/usr/local/lib/X11/fonts/TTF/,
> >> 	/usr/local/lib/X11/fonts/OTF,
> >> 	/usr/local/lib/X11/fonts/Type1/,
> >> 	/usr/local/lib/X11/fonts/100dpi/,
> >> 	/usr/local/lib/X11/fonts/75dpi/,
> >> 	/usr/local/lib/X11/fonts/URW/,
> >> 	/usr/local/lib/X11/fonts/freefont/,
> >> 	/usr/local/lib/X11/fonts/TrueType/,
> >> 	/usr/local/lib/X11/fonts/bitstream-vera/,
> >> 	/usr/local/lib/X11/fonts/cyrillic/,
> >> 	/usr/local/lib/X11/fonts/misc/,
> >> 	/usr/local/lib/X11/fonts/TTF/,
> >> 	/usr/local/lib/X11/fonts/OTF,
> >> 	/usr/local/lib/X11/fonts/Type1/,
> >> 	/usr/local/lib/X11/fonts/100dpi/,
> >> 	/usr/local/lib/X11/fonts/75dpi/,
> >> 	built-ins
> >> (**) ModulePath set to "/usr/local/lib/xorg/modules"
> >> (**) Extension "Composite" is enabled
> >> (**) Extension "XVideo" is enabled
> >> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
> >> (WW) Disabling Keyboard0
> >> (II) Loader magic: 0xb20
> >> (II) Module ABI versions:
> >> 	X.Org ANSI C Emulation: 0.4
> >> 	X.Org Video Driver: 5.0
> >> 	X.Org XInput driver : 4.0
> >> 	X.Org Server Extension : 2.0
> >> (II) Loader running on freebsd
> >> (--) Using syscons driver with X support (version 2.0)
> >> (--) using VT number 9
> >>
> >> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @ 0x????????/65536
> >> (II) System resource ranges:
> >> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> >> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
> >> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> >> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> >> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
> >> (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "record" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) LoadModule: "extmod"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
> >> (II) Module extmod: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	Module class: X.Org Server Extension
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension MIT-SCREEN-SAVER
> >> (II) Loading extension XFree86-VidModeExtension
> >> (II) Loading extension XFree86-DGA
> >> (II) Loading extension DPMS
> >> (II) Loading extension XVideo
> >> (II) Loading extension XVideo-MotionCompensation
> >> (II) Loading extension X-Resource
> >> (II) LoadModule: "record"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
> >> (II) Module record: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.13.0
> >> 	Module class: X.Org Server Extension
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension RECORD
> >> (II) LoadModule: "dbe"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
> >> (II) Module dbe: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	Module class: X.Org Server Extension
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension DOUBLE-BUFFER
> >> (II) LoadModule: "glx"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
> >> (II) Module glx: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (**) AIGLX enabled
> >> (II) Loading extension GLX
> >> (II) LoadModule: "dri"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
> >> (II) Module dri: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension XFree86-DRI
> >> (II) LoadModule: "dri2"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
> >> (II) Module dri2: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension DRI2
> >> (II) LoadModule: "synaptics"
> >> (II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
> >> (II) Module synaptics: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 0.99.3
> >> 	Module class: X.Org XInput Driver
> >> 	ABI class: X.Org XInput driver, version 4.0
> >> (II) LoadModule: "nouveau"
> >> (II) Loading /usr/local/lib/xorg/modules/drivers//nouveau_drv.so
> >> (II) Module nouveau: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 0.0.10
> >> 	Module class: X.Org Video Driver
> >> 	ABI class: X.Org Video Driver, version 5.0
> >> (II) LoadModule: "synaptics"
> >> (II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
> >> (II) NOUVEAU driver 20090514.9656762
> >> (II) NOUVEAU driver for NVIDIA chipset families :
> >> 	RIVA TNT    (NV04)
> >> 	RIVA TNT2   (NV05)
> >> 	GeForce 256 (NV10)
> >> 	GeForce 2   (NV11, NV15)
> >> 	GeForce 4MX (NV17, NV18)
> >> 	GeForce 3   (NV20)
> >> 	GeForce 4Ti (NV25, NV28)
> >> 	GeForce FX  (NV3x)
> >> 	GeForce 6   (NV4x)
> >> 	GeForce 7   (G7x)
> >> 	GeForce 8   (G8x)
> >> (II) Primary Device is: PCI 01@00:00:0
> >>
> >> Fatal server error:
> >> Caught signal 11.  Server aborting
> >>
> >>
> >> Please consult the The X.Org Foundation support 
> >> 	 at http://wiki.x.org
> >>  for help. 
> >> Please also check the log file at "/var/log/Xorg.0.log" for additional information.
> >>
> >> plain text document attachment (xorg.nv.conf)
> >> Section "ServerLayout"
> >> 	Identifier     "X.org Configured"
> >> 	Screen      0  "Screen0" 0 0
> >> #	InputDevice    "Mouse0" "CorePointer"
> >> 	InputDevice    "Synaptics_Touchpad" "CorePointer"
> >> 	InputDevice    "Keyboard0" "CoreKeyboard"
> >> 	Option         "DontZap" "Off"
> >> 	Option         "AIGLX" "true"
> >> EndSection
> >>
> >> Section "Extensions"
> >> 	Option       "Composite" "Enable"
> >> 	Option       "XVideo" "Enable"
> >> EndSection
> >>
> >> Section "Files"
> >> 	ModulePath   "/usr/local/lib/xorg/modules"
> >> 	FontPath     "/usr/local/lib/X11/fonts/misc/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/TTF/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/OTF"
> >> 	FontPath     "/usr/local/lib/X11/fonts/Type1/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/URW/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/freefont/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
> >> EndSection
> >>
> >> Section "Module"
> >> 	Load  "extmod"
> >> 	Load  "record"
> >> 	Load  "dbe"
> >> 	Load  "glx"
> >> 	Load  "dri"
> >> 	Load  "dri2"
> >> 	Load  "synaptics"
> >> EndSection
> >>
> >> #Section "ServerFlags"
> >> #	Option      "AllowEmptyInput"
> >> #EndSection
> >>
> >> Section "InputDevice"
> >> 	Identifier  "Keyboard0"
> >> 	Driver      "kbd"
> >> EndSection
> >>
> >> #Section "InputDevice"
> >> #	Identifier  "Mouse0"
> >> #	Driver      "mouse"
> >> #	Option	    "Protocol" "auto"
> >> #	Option	    "Device" "/dev/sysmouse"
> >> #	Option	    "ZAxisMapping" "4 5 6 7"
> >> #EndSection
> >>
> >> Section "InputDevice"
> >> 	Identifier  "Synaptics_Touchpad"
> >> 	Driver      "synaptics"
> >>
> >> 	Option      "Device"                "/dev/psm0"
> >> 	Option      "Protocol"              "psm"
> >>
> >> 	Option      "LeftEdge"              "1400"
> >> 	Option      "RightEdge"             "5600"
> >> 	Option      "TopEdge"               "1400"
> >> 	Option      "BottomEdge"            "4700"
> >>
> >> 	Option      "FingerLow"             "25"
> >> 	Option      "FingerHigh"            "30"
> >>
> >> 	Option      "MaxTapTime"            "180"
> >> 	Option      "MaxTapMove"            "220"
> >>
> >> 	Option      "VertScrollDelta"       "100"
> >> 	Option      "HorizScrollDelta"      "100"
> >>
> >> 	Option      "MinSpeed"              "0.1"
> >> 	Option      "MaxSpeed"              "0.25"
> >> 	Option      "AccelFactor"           "0.0010"
> >> 	Option      "FastTaps"              "off"
> >>
> >> 	Option      "ScrollButtonRepeat"    "100"
> >> 	Option      "UpDownScrolling"       "on"
> >> 	Option      "UpDownRepeat"          "on"
> >> 	Option      "LeftRightScrolling"    "on"
> >> 	Option      "LeftRightRepeat"       "on"
> >>
> >> 	Option      "TapButton1"            "0"
> >> 	Option      "TapButton2"            "0"
> >> 	Option      "TapButton3"            "0"
> >>
> >> 	# "SHMConfig on" seems good works with synclient(1).  But this
> >> 	# options is insecure.  I recommended "off" as default.
> >> 	Option      "SHMConfig"             "on"
> >>
> >> 	# If you use circular touchpad, uncomment them.
> >> 	#Option          "CircularPad"           "on"
> >> 	#Option          "CircularScrolling"     "on"
> >> 	#Option          "CircScrollDelta"       "0.5"
> >> EndSection
> >>
> >> Section "Monitor"
> >> 	Identifier   "Monitor0"
> >> 	VendorName   "Monitor Vendor"
> >> 	ModelName    "Monitor Model"
> >> 	Option       "DPMS"
> >> EndSection
> >>
> >> Section "Device"
> >>         ### Available Driver options are:-
> >>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> >>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> >>         ### [arg]: arg optional
> >>         #Option     "SWcursor"           	# [<bool>]
> >>         #Option     "HWcursor"           	# [<bool>]
> >>         #Option     "NoAccel"            	# [<bool>]
> >>         #Option     "ShadowFB"           	# [<bool>]
> >>         #Option     "UseFBDev"           	# [<bool>]
> >>         #Option     "Rotate"             	# [<str>]
> >>         #Option     "VideoKey"           	# <i>
> >>         #Option     "FlatPanel"          	# [<bool>]
> >>         #Option     "FPDither"           	# [<bool>]
> >>         #Option     "CrtcNumber"         	# <i>
> >>         #Option     "FPScale"            	# [<bool>]
> >>         #Option     "FPTweak"            	# <i>
> >>         #Option     "DualHead"           	# [<bool>]
> >> 	Option      "UseEdidDpi" "false"
> >> 	Option      "DPI" "96 x 96"
> >> 	Identifier  "Card0"
> >> 	Driver      "nv"
> >> 	VendorName  "nVidia Corporation"
> >> 	BoardName   "Quadro NVS 140M"
> >> 	BusID       "PCI:1:0:0"
> >> EndSection
> >>
> >> Section "DRI"
> >> 	Mode 0666
> >> EndSection
> >>
> >> Section "Screen"
> >> 	Identifier "Screen0"
> >> 	Device     "Card0"
> >> 	Monitor    "Monitor0"
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     1
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     4
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     8
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     15
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     16
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     24
> >> 		Modes     "1440x900"
> >> 	EndSubSection
> >> EndSection
> >>
> >> plain text document attachment (xorg.nouveau.conf)
> >> Section "ServerLayout"
> >> 	Identifier     "X.org Configured"
> >> 	Screen      0  "Screen0" 0 0
> >> #	InputDevice    "Mouse0" "CorePointer"
> >> 	InputDevice    "Synaptics_Touchpad" "CorePointer"
> >> 	InputDevice    "Keyboard0" "CoreKeyboard"
> >> 	Option         "DontZap" "Off"
> >> 	Option         "AIGLX" "true"
> >> EndSection
> >>
> >> Section "Extensions"
> >> 	Option       "Composite" "Enable"
> >> 	Option       "XVideo" "Enable"
> >> EndSection
> >>
> >> Section "Files"
> >> 	ModulePath   "/usr/local/lib/xorg/modules"
> >> 	FontPath     "/usr/local/lib/X11/fonts/misc/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/TTF/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/OTF"
> >> 	FontPath     "/usr/local/lib/X11/fonts/Type1/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/URW/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/freefont/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
> >> 	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
> >> EndSection
> >>
> >> Section "Module"
> >> 	Load  "extmod"
> >> 	Load  "record"
> >> 	Load  "dbe"
> >> 	Load  "glx"
> >> 	Load  "dri"
> >> 	Load  "dri2"
> >> 	Load  "synaptics"
> >> EndSection
> >>
> >> #Section "ServerFlags"
> >> #	Option      "AllowEmptyInput"
> >> #EndSection
> >>
> >> Section "InputDevice"
> >> 	Identifier  "Keyboard0"
> >> 	Driver      "kbd"
> >> EndSection
> >>
> >> #Section "InputDevice"
> >> #	Identifier  "Mouse0"
> >> #	Driver      "mouse"
> >> #	Option	    "Protocol" "auto"
> >> #	Option	    "Device" "/dev/sysmouse"
> >> #	Option	    "ZAxisMapping" "4 5 6 7"
> >> #EndSection
> >>
> >> Section "InputDevice"
> >> 	Identifier  "Synaptics_Touchpad"
> >> 	Driver      "synaptics"
> >>
> >> 	Option      "Device"                "/dev/psm0"
> >> 	Option      "Protocol"              "psm"
> >>
> >> 	Option      "LeftEdge"              "1400"
> >> 	Option      "RightEdge"             "5600"
> >> 	Option      "TopEdge"               "1400"
> >> 	Option      "BottomEdge"            "4700"
> >>
> >> 	Option      "FingerLow"             "25"
> >> 	Option      "FingerHigh"            "30"
> >>
> >> 	Option      "MaxTapTime"            "180"
> >> 	Option      "MaxTapMove"            "220"
> >>
> >> 	Option      "VertScrollDelta"       "100"
> >> 	Option      "HorizScrollDelta"      "100"
> >>
> >> 	Option      "MinSpeed"              "0.25"
> >> 	Option      "MaxSpeed"              "0.5"
> >> 	Option      "AccelFactor"           "0.0010"
> >> 	Option      "FastTaps"              "off"
> >>
> >> 	Option      "ScrollButtonRepeat"    "100"
> >> 	Option      "UpDownScrolling"       "on"
> >> 	Option      "UpDownRepeat"          "on"
> >> 	Option      "LeftRightScrolling"    "on"
> >> 	Option      "LeftRightRepeat"       "on"
> >>
> >> 	Option      "TapButton1"            "0"
> >> 	Option      "TapButton2"            "0"
> >> 	Option      "TapButton3"            "0"
> >>
> >> 	# "SHMConfig on" seems good works with synclient(1).  But this
> >> 	# options is insecure.  I recommended "off" as default.
> >> 	Option      "SHMConfig"             "on"
> >>
> >> 	# If you use circular touchpad, uncomment them.
> >> 	#Option          "CircularPad"           "on"
> >> 	#Option          "CircularScrolling"     "on"
> >> 	#Option          "CircScrollDelta"       "0.5"
> >> EndSection
> >>
> >> Section "Monitor"
> >> 	Identifier   "Monitor0"
> >> 	VendorName   "Monitor Vendor"
> >> 	ModelName    "Monitor Model"
> >> 	Option       "DPMS"
> >> EndSection
> >>
> >> Section "Device"
> >>         ### Available Driver options are:-
> >>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> >>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> >>         ### [arg]: arg optional
> >>         #Option     "SWcursor"           	# [<bool>]
> >>         #Option     "HWcursor"           	# [<bool>]
> >>         #Option     "NoAccel"            	# [<bool>]
> >>         #Option     "ShadowFB"           	# [<bool>]
> >>         #Option     "UseFBDev"           	# [<bool>]
> >>         #Option     "Rotate"             	# [<str>]
> >>         #Option     "VideoKey"           	# <i>
> >>         #Option     "FlatPanel"          	# [<bool>]
> >>         #Option     "FPDither"           	# [<bool>]
> >>         #Option     "CrtcNumber"         	# <i>
> >>         #Option     "FPScale"            	# [<bool>]
> >>         #Option     "FPTweak"            	# <i>
> >>         #Option     "DualHead"           	# [<bool>]
> >> 	Option      "UseEdidDpi" "false"
> >> 	Option      "DPI" "96 x 96"
> >> 	Identifier  "Card0"
> >> 	Driver      "nouveau"
> >> 	VendorName  "nVidia Corporation"
> >> 	BoardName   "Quadro NVS 140M"
> >> 	BusID       "PCI:1:0:0"
> >> 	Option      "AccelMethod" "EXA"
> >> 	Option      "EXANoComposite" "false"
> >> 	Option      "FBTexPercent" "50"
> >> 	Option      "MigrationHeuristic" "greedy"
> >> 	Option      "DRI" "true
> >> EndSection
> >>
> >> Section "DRI"
> >> 	Mode 0666
> >> EndSection
> >>
> >> Section "Screen"
> >> 	Identifier "Screen0"
> >> 	Device     "Card0"
> >> 	Monitor    "Monitor0"
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     1
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     4
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     8
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     15
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     16
> >> 	EndSubSection
> >> 	SubSection "Display"
> >> 		Viewport   0 0
> >> 		Depth     24
> >> 		Modes     "1440x900"
> >> 	EndSubSection
> >> EndSection
> >>
> >> plain text document attachment (Xorg.0.nv.log)
> >> X.Org X Server 1.6.0
> >> Release Date: 2009-2-25
> >> X Protocol Version 11, Revision 0
> >> Build Operating System: FreeBSD 7.1-RELEASE-p4 amd64 
> >> Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4 FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
> >> Build Date: 17 May 2009  09:21:33PM
> >>  
> >> 	Before reporting problems, check http://wiki.x.org
> >> 	to make sure that you have the latest version.
> >> Markers: (--) probed, (**) from config file, (==) default setting,
> >> 	(++) from command line, (!!) notice, (II) informational,
> >> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> >> (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 17 21:37:41 2009
> >> (++) Using config file: "/etc/X11/xorg.conf"
> >> (==) ServerLayout "X.org Configured"
> >> (**) |-->Screen "Screen0" (0)
> >> (**) |   |-->Monitor "Monitor0"
> >> (**) |   |-->Device "Card0"
> >> (**) |-->Input Device "Synaptics_Touchpad"
> >> (**) |-->Input Device "Keyboard0"
> >> (**) Option "AllowEmptyInput"
> >> (==) Automatically adding devices
> >> (==) Automatically enabling devices
> >> (**) FontPath set to:
> >> 	/usr/local/lib/X11/fonts/misc/,
> >> 	/usr/local/lib/X11/fonts/TTF/,
> >> 	/usr/local/lib/X11/fonts/OTF,
> >> 	/usr/local/lib/X11/fonts/Type1/,
> >> 	/usr/local/lib/X11/fonts/100dpi/,
> >> 	/usr/local/lib/X11/fonts/75dpi/,
> >> 	/usr/local/lib/X11/fonts/URW/,
> >> 	/usr/local/lib/X11/fonts/freefont/,
> >> 	/usr/local/lib/X11/fonts/TrueType/,
> >> 	/usr/local/lib/X11/fonts/bitstream-vera/,
> >> 	/usr/local/lib/X11/fonts/cyrillic/,
> >> 	/usr/local/lib/X11/fonts/encodings/,
> >> 	/usr/local/lib/X11/fonts/local/,
> >> 	/usr/local/lib/X11/fonts/util/,
> >> 	/usr/local/lib/X11/fonts/misc/,
> >> 	/usr/local/lib/X11/fonts/TTF/,
> >> 	/usr/local/lib/X11/fonts/OTF,
> >> 	/usr/local/lib/X11/fonts/Type1/,
> >> 	/usr/local/lib/X11/fonts/100dpi/,
> >> 	/usr/local/lib/X11/fonts/75dpi/,
> >> 	built-ins
> >> (**) ModulePath set to "/usr/local/lib/xorg/modules"
> >> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
> >> (WW) Disabling Keyboard0
> >> (II) Loader magic: 0x3b20
> >> (II) Module ABI versions:
> >> 	X.Org ANSI C Emulation: 0.4
> >> 	X.Org Video Driver: 5.0
> >> 	X.Org XInput driver : 4.0
> >> 	X.Org Server Extension : 2.0
> >> (II) Loader running on freebsd
> >> (--) Using syscons driver with X support (version 2.0)
> >> (--) using VT number 9
> >>
> >> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @ 0x????????/65536
> >> (II) System resource ranges:
> >> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> >> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
> >> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> >> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> >> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
> >> (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "record" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
> >> (II) "dri2" will be loaded by default.
> >> (II) LoadModule: "extmod"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
> >> (II) Module extmod: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	Module class: X.Org Server Extension
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension MIT-SCREEN-SAVER
> >> (II) Loading extension XFree86-VidModeExtension
> >> (II) Loading extension XFree86-DGA
> >> (II) Loading extension DPMS
> >> (II) Loading extension XVideo
> >> (II) Loading extension XVideo-MotionCompensation
> >> (II) Loading extension X-Resource
> >> (II) LoadModule: "record"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
> >> (II) Module record: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.13.0
> >> 	Module class: X.Org Server Extension
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension RECORD
> >> (II) LoadModule: "dbe"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
> >> (II) Module dbe: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	Module class: X.Org Server Extension
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension DOUBLE-BUFFER
> >> (II) LoadModule: "glx"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
> >> (II) Module glx: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (==) AIGLX disabled
> >> (II) Loading extension GLX
> >> (II) LoadModule: "xtrap"
> >> (WW) Warning, couldn't open module xtrap
> >> (II) UnloadModule: "xtrap"
> >> (EE) Failed to load module "xtrap" (module does not exist, 0)
> >> (II) LoadModule: "dri"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
> >> (II) Module dri: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension XFree86-DRI
> >> (II) LoadModule: "freetype"
> >> (WW) Warning, couldn't open module freetype
> >> (II) UnloadModule: "freetype"
> >> (EE) Failed to load module "freetype" (module does not exist, 0)
> >> (II) LoadModule: "type1"
> >> (WW) Warning, couldn't open module type1
> >> (II) UnloadModule: "type1"
> >> (EE) Failed to load module "type1" (module does not exist, 0)
> >> (II) LoadModule: "synaptics"
> >> (II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
> >> (II) Module synaptics: vendor="X.Org Foundation"
> >> 	compiled for 1.6.1, module version = 1.1.0
> >> 	Module class: X.Org XInput Driver
> >> 	ABI class: X.Org XInput driver, version 4.0
> >> (II) LoadModule: "dri2"
> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
> >> (II) Module dri2: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	ABI class: X.Org Server Extension, version 2.0
> >> (II) Loading extension DRI2
> >> (II) LoadModule: "nv"
> >> (II) Loading /usr/local/lib/xorg/modules/drivers//nv_drv.so
> >> (II) Module nv: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 2.1.13
> >> 	Module class: X.Org Video Driver
> >> 	ABI class: X.Org Video Driver, version 5.0
> >> (II) LoadModule: "synaptics"
> >> (II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
> >> (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
> >> 	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
> >> 	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
> >> 	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
> >> 	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
> >> 	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
> >> 	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
> >> 	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
> >> 	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
> >> 	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
> >> 	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
> >> 	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
> >> 	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
> >> 	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
> >> 	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
> >> 	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
> >> 	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
> >> 	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
> >> 	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
> >> 	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
> >> 	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
> >> 	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
> >> 	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
> >> 	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
> >> 	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
> >> 	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
> >> 	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
> >> 	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
> >> 	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
> >> 	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
> >> 	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
> >> 	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
> >> 	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
> >> 	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
> >> 	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
> >> 	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
> >> 	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
> >> 	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
> >> 	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
> >> 	GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
> >> 	Quadro FX 540, GeForce 6200, GeForce 6500,
> >> 	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
> >> 	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
> >> 	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
> >> 	GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
> >> 	GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
> >> 	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
> >> 	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
> >> 	GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
> >> 	GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
> >> 	GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
> >> 	GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
> >> 	GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
> >> 	Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
> >> 	GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
> >> 	GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
> >> 	Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
> >> 	Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
> >> 	GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
> >> 	GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
> >> 	GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
> >> 	GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
> >> 	GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
> >> 	Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
> >> 	GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
> >> 	GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
> >> 	GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
> >> 	GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
> >> 	GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
> >> 	GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
> >> 	GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
> >> 	GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
> >> 	GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro FX 3600M,
> >> 	GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
> >> 	GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
> >> 	GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
> >> 	GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS,
> >> 	GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M
> >> (II) Primary Device is: PCI 01@00:00:0
> >> (--) NV: Found NVIDIA Quadro NVS 140M at 01@00:00:0
> >> (II) resource ranges after probing:
> >> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
> >> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
> >> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
> >> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
> >> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
> >> (II) Loading sub module "int10"
> >> (II) LoadModule: "int10"
> >> (II) Loading /usr/local/lib/xorg/modules//libint10.so
> >> (II) Module int10: vendor="X.Org Foundation"
> >> 	compiled for 1.6.0, module version = 1.0.0
> >> 	ABI class: X.Org Video Driver, version 5.0
> >> (II) NV(0): Initializing int10
> >> (==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
> >> (==) NV(0): Write-combining range (0xc0000,0x40000) was already clear
> >> (II) NV(0): Primary V_BIOS segment is: 0xc000
> >> (==) NV(0): Write-combining range (0x0,0x1000) was already clear
> >> (--) NV(0): Console is VGA mode 0x3
> >> (==) NV(0): Depth 24, (--) framebuffer bpp 32
> >> (==) NV(0): RGB weight 888
> >> (==) NV(0): Default visual is TrueColor
> >> (==) NV(0): Using hardware cursor
> >> (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
> >> (EE) NV(0): Failed to map MMIO registers: No such file or directory
> >> (==) NV(0): Write-combining range (0x0,0x1000) was already clear
> >> (II) UnloadModule: "nv"
> >> (II) UnloadModule: "int10"
> >> (II) Unloading /usr/local/lib/xorg/modules//libint10.so
> >> (EE) Screen(s) found, but none have a usable configuration.
> >>
> >> Fatal server error:
> >> no screens found
> >>
> >> Please consult the The X.Org Foundation support 
> >> 	 at http://wiki.x.org
> >>  for help. 
> >> Please also check the log file at "/var/log/Xorg.0.log" for additional information.
> >>
> >> _______________________________________________
> >> freebsd-x11@freebsd.org mailing list
> >> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> >> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090527/6ebed481/attachment-0001.pgp
From andriy at irbisnet.com  Wed May 27 16:11:14 2009
From: andriy at irbisnet.com (Andriy Bakay)
Date: Wed May 27 16:11:28 2009
Subject: Problems with libpciaccess-0.10.6
Message-ID: <4A1D5FDD.9050306@irbisnet.com>

Hi X11 Team,

Recently I tried to upgrade to 'libpciaccess-0.10.6' port on my laptop: 
ThinkPad T61, FreeBSD 7.1 amd64, nVidia Quadro NVS 140M. And my X 
(xorg-server-1.6.0,1) server crashed during startup (see attached logs). 
I tried 'xorg-server-1.6.1' and two different nVidia drivers 'nv' and 
'nouveau' same crash, but with different log entries. After I downgrade 
to 'libpciaccess-0.10.5_6' port both drivers working fine. I attached 
the X server logs and configs for both nVidia drivers:

nv:      Xorg.0.nv.log, xorg.nv.conf
nouveau: Xorg.0.nouveau.log, xorg.nouveau.conf

Please, advise.

Thanks,
Andriy
-------------- next part --------------

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.0-RELEASE amd64 
Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4 FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
Build Date: 12 April 2009  03:12:50PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat May 23 21:47:12 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Synaptics_Touchpad"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "Off"
(**) Option "AIGLX" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	/usr/local/lib/X11/fonts/URW/,
	/usr/local/lib/X11/fonts/freefont/,
	/usr/local/lib/X11/fonts/TrueType/,
	/usr/local/lib/X11/fonts/bitstream-vera/,
	/usr/local/lib/X11/fonts/cyrillic/,
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	built-ins
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(**) Extension "Composite" is enabled
(**) Extension "XVideo" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(II) Loader magic: 0xb20
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @ 0x????????/65536
(II) System resource ranges:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "synaptics"
(II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.99.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "nouveau"
(II) Loading /usr/local/lib/xorg/modules/drivers//nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 0.0.10
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
(II) NOUVEAU driver 20090514.9656762
(II) NOUVEAU driver for NVIDIA chipset families :
	RIVA TNT    (NV04)
	RIVA TNT2   (NV05)
	GeForce 256 (NV10)
	GeForce 2   (NV11, NV15)
	GeForce 4MX (NV17, NV18)
	GeForce 3   (NV20)
	GeForce 4Ti (NV25, NV28)
	GeForce FX  (NV3x)
	GeForce 6   (NV4x)
	GeForce 7   (G7x)
	GeForce 8   (G8x)
(II) Primary Device is: PCI 01@00:00:0

Fatal server error:
Caught signal 11.  Server aborting


Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

-------------- next part --------------
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
#	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Synaptics_Touchpad" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	Option         "DontZap" "Off"
	Option         "AIGLX" "true"
EndSection

Section "Extensions"
	Option       "Composite" "Enable"
	Option       "XVideo" "Enable"
EndSection

Section "Files"
	ModulePath   "/usr/local/lib/xorg/modules"
	FontPath     "/usr/local/lib/X11/fonts/misc/"
	FontPath     "/usr/local/lib/X11/fonts/TTF/"
	FontPath     "/usr/local/lib/X11/fonts/OTF"
	FontPath     "/usr/local/lib/X11/fonts/Type1/"
	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
	FontPath     "/usr/local/lib/X11/fonts/URW/"
	FontPath     "/usr/local/lib/X11/fonts/freefont/"
	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
EndSection

Section "Module"
	Load  "extmod"
	Load  "record"
	Load  "dbe"
	Load  "glx"
	Load  "dri"
	Load  "dri2"
	Load  "synaptics"
EndSection

#Section "ServerFlags"
#	Option      "AllowEmptyInput"
#EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

#Section "InputDevice"
#	Identifier  "Mouse0"
#	Driver      "mouse"
#	Option	    "Protocol" "auto"
#	Option	    "Device" "/dev/sysmouse"
#	Option	    "ZAxisMapping" "4 5 6 7"
#EndSection

Section "InputDevice"
	Identifier  "Synaptics_Touchpad"
	Driver      "synaptics"

	Option      "Device"                "/dev/psm0"
	Option      "Protocol"              "psm"

	Option      "LeftEdge"              "1400"
	Option      "RightEdge"             "5600"
	Option      "TopEdge"               "1400"
	Option      "BottomEdge"            "4700"

	Option      "FingerLow"             "25"
	Option      "FingerHigh"            "30"

	Option      "MaxTapTime"            "180"
	Option      "MaxTapMove"            "220"

	Option      "VertScrollDelta"       "100"
	Option      "HorizScrollDelta"      "100"

	Option      "MinSpeed"              "0.1"
	Option      "MaxSpeed"              "0.25"
	Option      "AccelFactor"           "0.0010"
	Option      "FastTaps"              "off"

	Option      "ScrollButtonRepeat"    "100"
	Option      "UpDownScrolling"       "on"
	Option      "UpDownRepeat"          "on"
	Option      "LeftRightScrolling"    "on"
	Option      "LeftRightRepeat"       "on"

	Option      "TapButton1"            "0"
	Option      "TapButton2"            "0"
	Option      "TapButton3"            "0"

	# "SHMConfig on" seems good works with synclient(1).  But this
	# options is insecure.  I recommended "off" as default.
	Option      "SHMConfig"             "on"

	# If you use circular touchpad, uncomment them.
	#Option          "CircularPad"           "on"
	#Option          "CircularScrolling"     "on"
	#Option          "CircScrollDelta"       "0.5"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
	Option       "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"           	# [<bool>]
        #Option     "HWcursor"           	# [<bool>]
        #Option     "NoAccel"            	# [<bool>]
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "Rotate"             	# [<str>]
        #Option     "VideoKey"           	# <i>
        #Option     "FlatPanel"          	# [<bool>]
        #Option     "FPDither"           	# [<bool>]
        #Option     "CrtcNumber"         	# <i>
        #Option     "FPScale"            	# [<bool>]
        #Option     "FPTweak"            	# <i>
        #Option     "DualHead"           	# [<bool>]
	Option      "UseEdidDpi" "false"
	Option      "DPI" "96 x 96"
	Identifier  "Card0"
	Driver      "nv"
	VendorName  "nVidia Corporation"
	BoardName   "Quadro NVS 140M"
	BusID       "PCI:1:0:0"
EndSection

Section "DRI"
	Mode 0666
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes     "1440x900"
	EndSubSection
EndSection

-------------- next part --------------
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
#	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Synaptics_Touchpad" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	Option         "DontZap" "Off"
	Option         "AIGLX" "true"
EndSection

Section "Extensions"
	Option       "Composite" "Enable"
	Option       "XVideo" "Enable"
EndSection

Section "Files"
	ModulePath   "/usr/local/lib/xorg/modules"
	FontPath     "/usr/local/lib/X11/fonts/misc/"
	FontPath     "/usr/local/lib/X11/fonts/TTF/"
	FontPath     "/usr/local/lib/X11/fonts/OTF"
	FontPath     "/usr/local/lib/X11/fonts/Type1/"
	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
	FontPath     "/usr/local/lib/X11/fonts/URW/"
	FontPath     "/usr/local/lib/X11/fonts/freefont/"
	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
EndSection

Section "Module"
	Load  "extmod"
	Load  "record"
	Load  "dbe"
	Load  "glx"
	Load  "dri"
	Load  "dri2"
	Load  "synaptics"
EndSection

#Section "ServerFlags"
#	Option      "AllowEmptyInput"
#EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

#Section "InputDevice"
#	Identifier  "Mouse0"
#	Driver      "mouse"
#	Option	    "Protocol" "auto"
#	Option	    "Device" "/dev/sysmouse"
#	Option	    "ZAxisMapping" "4 5 6 7"
#EndSection

Section "InputDevice"
	Identifier  "Synaptics_Touchpad"
	Driver      "synaptics"

	Option      "Device"                "/dev/psm0"
	Option      "Protocol"              "psm"

	Option      "LeftEdge"              "1400"
	Option      "RightEdge"             "5600"
	Option      "TopEdge"               "1400"
	Option      "BottomEdge"            "4700"

	Option      "FingerLow"             "25"
	Option      "FingerHigh"            "30"

	Option      "MaxTapTime"            "180"
	Option      "MaxTapMove"            "220"

	Option      "VertScrollDelta"       "100"
	Option      "HorizScrollDelta"      "100"

	Option      "MinSpeed"              "0.25"
	Option      "MaxSpeed"              "0.5"
	Option      "AccelFactor"           "0.0010"
	Option      "FastTaps"              "off"

	Option      "ScrollButtonRepeat"    "100"
	Option      "UpDownScrolling"       "on"
	Option      "UpDownRepeat"          "on"
	Option      "LeftRightScrolling"    "on"
	Option      "LeftRightRepeat"       "on"

	Option      "TapButton1"            "0"
	Option      "TapButton2"            "0"
	Option      "TapButton3"            "0"

	# "SHMConfig on" seems good works with synclient(1).  But this
	# options is insecure.  I recommended "off" as default.
	Option      "SHMConfig"             "on"

	# If you use circular touchpad, uncomment them.
	#Option          "CircularPad"           "on"
	#Option          "CircularScrolling"     "on"
	#Option          "CircScrollDelta"       "0.5"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
	Option       "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"           	# [<bool>]
        #Option     "HWcursor"           	# [<bool>]
        #Option     "NoAccel"            	# [<bool>]
        #Option     "ShadowFB"           	# [<bool>]
        #Option     "UseFBDev"           	# [<bool>]
        #Option     "Rotate"             	# [<str>]
        #Option     "VideoKey"           	# <i>
        #Option     "FlatPanel"          	# [<bool>]
        #Option     "FPDither"           	# [<bool>]
        #Option     "CrtcNumber"         	# <i>
        #Option     "FPScale"            	# [<bool>]
        #Option     "FPTweak"            	# <i>
        #Option     "DualHead"           	# [<bool>]
	Option      "UseEdidDpi" "false"
	Option      "DPI" "96 x 96"
	Identifier  "Card0"
	Driver      "nouveau"
	VendorName  "nVidia Corporation"
	BoardName   "Quadro NVS 140M"
	BusID       "PCI:1:0:0"
	Option      "AccelMethod" "EXA"
	Option      "EXANoComposite" "false"
	Option      "FBTexPercent" "50"
	Option      "MigrationHeuristic" "greedy"
	Option      "DRI" "true
EndSection

Section "DRI"
	Mode 0666
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes     "1440x900"
	EndSubSection
EndSection

-------------- next part --------------

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: FreeBSD 7.1-RELEASE-p4 amd64 
Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4 FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009     root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
Build Date: 17 May 2009  09:21:33PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 17 21:37:41 2009
(++) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Synaptics_Touchpad"
(**) |-->Input Device "Keyboard0"
(**) Option "AllowEmptyInput"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	/usr/local/lib/X11/fonts/URW/,
	/usr/local/lib/X11/fonts/freefont/,
	/usr/local/lib/X11/fonts/TrueType/,
	/usr/local/lib/X11/fonts/bitstream-vera/,
	/usr/local/lib/X11/fonts/cyrillic/,
	/usr/local/lib/X11/fonts/encodings/,
	/usr/local/lib/X11/fonts/local/,
	/usr/local/lib/X11/fonts/util/,
	/usr/local/lib/X11/fonts/misc/,
	/usr/local/lib/X11/fonts/TTF/,
	/usr/local/lib/X11/fonts/OTF,
	/usr/local/lib/X11/fonts/Type1/,
	/usr/local/lib/X11/fonts/100dpi/,
	/usr/local/lib/X11/fonts/75dpi/,
	built-ins
(**) ModulePath set to "/usr/local/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(II) Loader magic: 0x3b20
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on freebsd
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9

(--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @ 0x????????/65536
(II) System resource ranges:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX disabled
(II) Loading extension GLX
(II) LoadModule: "xtrap"
(WW) Warning, couldn't open module xtrap
(II) UnloadModule: "xtrap"
(EE) Failed to load module "xtrap" (module does not exist, 0)
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "synaptics"
(II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.6.1, module version = 1.1.0
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "dri2"
(II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nv"
(II) Loading /usr/local/lib/xorg/modules/drivers//nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 2.1.13
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
	GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
	Quadro FX 540, GeForce 6200, GeForce 6500,
	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
	GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
	GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
	GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
	GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
	GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
	GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
	GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
	Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
	GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
	GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
	Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
	Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
	GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
	GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
	GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
	GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
	GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
	Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
	GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
	GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
	GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
	GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
	GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
	GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
	GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
	GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
	GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro FX 3600M,
	GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
	GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
	GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
	GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS,
	GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M
(II) Primary Device is: PCI 01@00:00:0
(--) NV: Found NVIDIA Quadro NVS 140M at 01@00:00:0
(II) resource ranges after probing:
	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 5.0
(II) NV(0): Initializing int10
(==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
(==) NV(0): Write-combining range (0xc0000,0x40000) was already clear
(II) NV(0): Primary V_BIOS segment is: 0xc000
(==) NV(0): Write-combining range (0x0,0x1000) was already clear
(--) NV(0): Console is VGA mode 0x3
(==) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(==) NV(0): Using hardware cursor
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(EE) NV(0): Failed to map MMIO registers: No such file or directory
(==) NV(0): Write-combining range (0x0,0x1000) was already clear
(II) UnloadModule: "nv"
(II) UnloadModule: "int10"
(II) Unloading /usr/local/lib/xorg/modules//libint10.so
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

From invalid.pointer at gmail.com  Wed May 27 16:46:35 2009
From: invalid.pointer at gmail.com (Manish Jain)
Date: Wed May 27 16:46:41 2009
Subject: Support for nVidia GeForce 7025/7050PV/nForce 630a graphics
In-Reply-To: <1243433247.2926.2277.camel@balrog.2hip.net>
References: <4A1D348F.8090504@gmail.com>
	<1243433247.2926.2277.camel@balrog.2hip.net>
Message-ID: <4A1D6E6A.8060702@gmail.com>

Robert Noland wrote:
> On Wed, 2009-05-27 at 18:09 +0530, Manish Jain wrote:
>> Hello,
>>
>> I am thinking of going in for an AMD solution for my new home PC.
>>
>> Does FreeBSD work easily with Asus M2N68-AM (nvidia GeForce 7025/nForce 
>> 630a graphics as per Asus; nvidia GeForce 7050PV/nForce 630a graphics as 
>> per CNET/other sites). I would probably be using this along with Athlon 
>> Dual-Core 5200+
>>
>> FreeBSD-7.1's drm directory in src does NOT seem to have a listing for 
>> GeForce 7025/GeForce 7050/nForce 630a. And xorgconfigurator just lists 
>> one (generic) driver nv for nvidia. So would DRI work ?
> 
> There are three possible drivers, nv (kindof old and crusty), nouveau
> (in current ports), and the binary blob from Nvidia (currently i386
> only).  For nv, there is no drm.  For nouveau, I have patches for drm
> support that I may go ahead and commit to -CURRENT over the next couple
> of days.  The current patch also applies to -STABLE.  With the patch you
> should get accelerated EXA and Xv, but not 3d yet.  I have gotten the 3d
> driver to sort of work, but generally it isn't in a user ready state (on
> linux either).
> 
> The binary blob does whatever it does and I'll let others give you
> details on that.
> 
> robert.
> 
>> I ask this because I currently have an i810-based motherboard for which 
>> there is no DRI support in FreeBSD and I need to make sure I don't end 
>> up without DRI again.
> 


Hello Roland,

Thanks for your reply. One final question.

> With the patch you should get accelerated EXA and Xv, but not 3d yet.

I am only interested in playing DVD's, not games. Are EXA and Xv 
sufficient for that ? If 3d is required too, then I have to dump this 
idea altogether and try something else.

-- 
Regards
Manish Jain
invalid.pointer@gmail.com
+91-96500-10329

Laast year I kudn't spell Software Engineer. Now I are won.
From rnoland at FreeBSD.org  Wed May 27 17:14:39 2009
From: rnoland at FreeBSD.org (Robert Noland)
Date: Wed May 27 17:14:46 2009
Subject: Support for nVidia GeForce 7025/7050PV/nForce 630a graphics
In-Reply-To: <4A1D6E6A.8060702@gmail.com>
References: <4A1D348F.8090504@gmail.com>
	<1243433247.2926.2277.camel@balrog.2hip.net>
	<4A1D6E6A.8060702@gmail.com>
Message-ID: <1243444413.2926.2472.camel@balrog.2hip.net>

On Wed, 2009-05-27 at 22:16 +0530, Manish Jain wrote:
> Robert Noland wrote:
> > On Wed, 2009-05-27 at 18:09 +0530, Manish Jain wrote:
> >> Hello,
> >>
> >> I am thinking of going in for an AMD solution for my new home PC.
> >>
> >> Does FreeBSD work easily with Asus M2N68-AM (nvidia GeForce 7025/nForce 
> >> 630a graphics as per Asus; nvidia GeForce 7050PV/nForce 630a graphics as 
> >> per CNET/other sites). I would probably be using this along with Athlon 
> >> Dual-Core 5200+
> >>
> >> FreeBSD-7.1's drm directory in src does NOT seem to have a listing for 
> >> GeForce 7025/GeForce 7050/nForce 630a. And xorgconfigurator just lists 
> >> one (generic) driver nv for nvidia. So would DRI work ?
> > 
> > There are three possible drivers, nv (kindof old and crusty), nouveau
> > (in current ports), and the binary blob from Nvidia (currently i386
> > only).  For nv, there is no drm.  For nouveau, I have patches for drm
> > support that I may go ahead and commit to -CURRENT over the next couple
> > of days.  The current patch also applies to -STABLE.  With the patch you
> > should get accelerated EXA and Xv, but not 3d yet.  I have gotten the 3d
> > driver to sort of work, but generally it isn't in a user ready state (on
> > linux either).
> > 
> > The binary blob does whatever it does and I'll let others give you
> > details on that.
> > 
> > robert.
> > 
> >> I ask this because I currently have an i810-based motherboard for which 
> >> there is no DRI support in FreeBSD and I need to make sure I don't end 
> >> up without DRI again.
> > 
> 
> 
> Hello Roland,
> 
> Thanks for your reply. One final question.
> 
> > With the patch you should get accelerated EXA and Xv, but not 3d yet.
> 
> I am only interested in playing DVD's, not games. Are EXA and Xv 
> sufficient for that ? If 3d is required too, then I have to dump this 
> idea altogether and try something else.

Xv is normally what is used for video, so I think you should be ok.  I
don't have this particular card/chip though...

robert.

-- 
Robert Noland <rnoland@FreeBSD.org>
FreeBSD
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 196 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090527/9bdbff2d/attachment.pgp
From onemda at gmail.com  Wed May 27 22:10:32 2009
From: onemda at gmail.com (Paul B. Mahol)
Date: Wed May 27 22:10:40 2009
Subject: Problems with libpciaccess-0.10.6
In-Reply-To: <1243440584.2926.2403.camel@balrog.2hip.net>
References: <4A1D5FDD.9050306@irbisnet.com>
	<1243439705.2926.2387.camel@balrog.2hip.net>
	<4A1D6445.1080707@irbisnet.com>
	<1243440584.2926.2403.camel@balrog.2hip.net>
Message-ID: <3a142e750905271510s787d3572r9b0b25fea6510c66@mail.gmail.com>

On 5/27/09, Robert Noland <rnoland@freebsd.org> wrote:
> On Wed, 2009-05-27 at 12:03 -0400, Andriy Bakay wrote:
>> Unfortunately, X server did not store core dump. If you give me options
>> which will force X server to make core dump then I can try to reproduce
>> it again.
>
>        Option "NoTrapSignals"  "boolean"
>               This prevents the Xorg server from trapping  a  range  of
> unex-
>               pected  fatal  signals  and  exiting cleanly.  Instead,
> the Xorg
>               server will die and drop core where  the  fault  occurred.
> The
>               default  behaviour  is  for the Xorg server to exit
> cleanly, but
>               still drop a core file.  In general you never want to  use
> this
>               option  unless you are debugging an Xorg server problem
> and know
>               how to deal with the consequences.
>
> robert.

And kern.sugid_coredump=1 sysctl, if Xorg is installed with setuid bit.
>
>> Robert Noland wrote:
>> > On Wed, 2009-05-27 at 11:44 -0400, Andriy Bakay wrote:
>> >> Hi X11 Team,
>> >>
>> >> Recently I tried to upgrade to 'libpciaccess-0.10.6' port on my laptop:
>> >>
>> >> ThinkPad T61, FreeBSD 7.1 amd64, nVidia Quadro NVS 140M. And my X
>> >> (xorg-server-1.6.0,1) server crashed during startup (see attached
>> >> logs).
>> >> I tried 'xorg-server-1.6.1' and two different nVidia drivers 'nv' and
>> >> 'nouveau' same crash, but with different log entries. After I downgrade
>> >>
>> >> to 'libpciaccess-0.10.5_6' port both drivers working fine. I attached
>> >> the X server logs and configs for both nVidia drivers:
>> >
>> > Hrm, I really didn't think that much changed with 0.10.6.  Any chance
>> > you can get a backtrace from the X server?
>> >
>> > robert.
>> >
>> >> nv:      Xorg.0.nv.log, xorg.nv.conf
>> >> nouveau: Xorg.0.nouveau.log, xorg.nouveau.conf
>> >>
>> >> Please, advise.
>> >>
>> >> Thanks,
>> >> Andriy
>> >> plain text document attachment (Xorg.0.nouveau.log)
>> >> X.Org X Server 1.6.0
>> >> Release Date: 2009-2-25
>> >> X Protocol Version 11, Revision 0
>> >> Build Operating System: FreeBSD 7.0-RELEASE amd64
>> >> Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4
>> >> FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009
>> >> root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>> >> Build Date: 12 April 2009  03:12:50PM
>> >>
>> >> 	Before reporting problems, check http://wiki.x.org
>> >> 	to make sure that you have the latest version.
>> >> Markers: (--) probed, (**) from config file, (==) default setting,
>> >> 	(++) from command line, (!!) notice, (II) informational,
>> >> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> >> (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 23 21:47:12 2009
>> >> (==) Using config file: "/etc/X11/xorg.conf"
>> >> (==) ServerLayout "X.org Configured"
>> >> (**) |-->Screen "Screen0" (0)
>> >> (**) |   |-->Monitor "Monitor0"
>> >> (**) |   |-->Device "Card0"
>> >> (**) |-->Input Device "Synaptics_Touchpad"
>> >> (**) |-->Input Device "Keyboard0"
>> >> (**) Option "DontZap" "Off"
>> >> (**) Option "AIGLX" "true"
>> >> (==) Automatically adding devices
>> >> (==) Automatically enabling devices
>> >> (**) FontPath set to:
>> >> 	/usr/local/lib/X11/fonts/misc/,
>> >> 	/usr/local/lib/X11/fonts/TTF/,
>> >> 	/usr/local/lib/X11/fonts/OTF,
>> >> 	/usr/local/lib/X11/fonts/Type1/,
>> >> 	/usr/local/lib/X11/fonts/100dpi/,
>> >> 	/usr/local/lib/X11/fonts/75dpi/,
>> >> 	/usr/local/lib/X11/fonts/URW/,
>> >> 	/usr/local/lib/X11/fonts/freefont/,
>> >> 	/usr/local/lib/X11/fonts/TrueType/,
>> >> 	/usr/local/lib/X11/fonts/bitstream-vera/,
>> >> 	/usr/local/lib/X11/fonts/cyrillic/,
>> >> 	/usr/local/lib/X11/fonts/misc/,
>> >> 	/usr/local/lib/X11/fonts/TTF/,
>> >> 	/usr/local/lib/X11/fonts/OTF,
>> >> 	/usr/local/lib/X11/fonts/Type1/,
>> >> 	/usr/local/lib/X11/fonts/100dpi/,
>> >> 	/usr/local/lib/X11/fonts/75dpi/,
>> >> 	built-ins
>> >> (**) ModulePath set to "/usr/local/lib/xorg/modules"
>> >> (**) Extension "Composite" is enabled
>> >> (**) Extension "XVideo" is enabled
>> >> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or
>> >> 'vmmouse' will be disabled.
>> >> (WW) Disabling Keyboard0
>> >> (II) Loader magic: 0xb20
>> >> (II) Module ABI versions:
>> >> 	X.Org ANSI C Emulation: 0.4
>> >> 	X.Org Video Driver: 5.0
>> >> 	X.Org XInput driver : 4.0
>> >> 	X.Org Server Extension : 2.0
>> >> (II) Loader running on freebsd
>> >> (--) Using syscons driver with X support (version 2.0)
>> >> (--) using VT number 9
>> >>
>> >> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @
>> >> 0x????????/65536
>> >> (II) System resource ranges:
>> >> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>> >> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>> >> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> >> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>> >> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>> >> (II) "extmod" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "dbe" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "glx" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "record" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "dri" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "dri2" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) LoadModule: "extmod"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
>> >> (II) Module extmod: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	Module class: X.Org Server Extension
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension MIT-SCREEN-SAVER
>> >> (II) Loading extension XFree86-VidModeExtension
>> >> (II) Loading extension XFree86-DGA
>> >> (II) Loading extension DPMS
>> >> (II) Loading extension XVideo
>> >> (II) Loading extension XVideo-MotionCompensation
>> >> (II) Loading extension X-Resource
>> >> (II) LoadModule: "record"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
>> >> (II) Module record: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.13.0
>> >> 	Module class: X.Org Server Extension
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension RECORD
>> >> (II) LoadModule: "dbe"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
>> >> (II) Module dbe: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	Module class: X.Org Server Extension
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension DOUBLE-BUFFER
>> >> (II) LoadModule: "glx"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
>> >> (II) Module glx: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (**) AIGLX enabled
>> >> (II) Loading extension GLX
>> >> (II) LoadModule: "dri"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
>> >> (II) Module dri: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension XFree86-DRI
>> >> (II) LoadModule: "dri2"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
>> >> (II) Module dri2: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension DRI2
>> >> (II) LoadModule: "synaptics"
>> >> (II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
>> >> (II) Module synaptics: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 0.99.3
>> >> 	Module class: X.Org XInput Driver
>> >> 	ABI class: X.Org XInput driver, version 4.0
>> >> (II) LoadModule: "nouveau"
>> >> (II) Loading /usr/local/lib/xorg/modules/drivers//nouveau_drv.so
>> >> (II) Module nouveau: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 0.0.10
>> >> 	Module class: X.Org Video Driver
>> >> 	ABI class: X.Org Video Driver, version 5.0
>> >> (II) LoadModule: "synaptics"
>> >> (II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
>> >> (II) NOUVEAU driver 20090514.9656762
>> >> (II) NOUVEAU driver for NVIDIA chipset families :
>> >> 	RIVA TNT    (NV04)
>> >> 	RIVA TNT2   (NV05)
>> >> 	GeForce 256 (NV10)
>> >> 	GeForce 2   (NV11, NV15)
>> >> 	GeForce 4MX (NV17, NV18)
>> >> 	GeForce 3   (NV20)
>> >> 	GeForce 4Ti (NV25, NV28)
>> >> 	GeForce FX  (NV3x)
>> >> 	GeForce 6   (NV4x)
>> >> 	GeForce 7   (G7x)
>> >> 	GeForce 8   (G8x)
>> >> (II) Primary Device is: PCI 01@00:00:0
>> >>
>> >> Fatal server error:
>> >> Caught signal 11.  Server aborting
>> >>
>> >>
>> >> Please consult the The X.Org Foundation support
>> >> 	 at http://wiki.x.org
>> >>  for help.
>> >> Please also check the log file at "/var/log/Xorg.0.log" for additional
>> >> information.
>> >>
>> >> plain text document attachment (xorg.nv.conf)
>> >> Section "ServerLayout"
>> >> 	Identifier     "X.org Configured"
>> >> 	Screen      0  "Screen0" 0 0
>> >> #	InputDevice    "Mouse0" "CorePointer"
>> >> 	InputDevice    "Synaptics_Touchpad" "CorePointer"
>> >> 	InputDevice    "Keyboard0" "CoreKeyboard"
>> >> 	Option         "DontZap" "Off"
>> >> 	Option         "AIGLX" "true"
>> >> EndSection
>> >>
>> >> Section "Extensions"
>> >> 	Option       "Composite" "Enable"
>> >> 	Option       "XVideo" "Enable"
>> >> EndSection
>> >>
>> >> Section "Files"
>> >> 	ModulePath   "/usr/local/lib/xorg/modules"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/misc/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/TTF/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/OTF"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/Type1/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/URW/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/freefont/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
>> >> EndSection
>> >>
>> >> Section "Module"
>> >> 	Load  "extmod"
>> >> 	Load  "record"
>> >> 	Load  "dbe"
>> >> 	Load  "glx"
>> >> 	Load  "dri"
>> >> 	Load  "dri2"
>> >> 	Load  "synaptics"
>> >> EndSection
>> >>
>> >> #Section "ServerFlags"
>> >> #	Option      "AllowEmptyInput"
>> >> #EndSection
>> >>
>> >> Section "InputDevice"
>> >> 	Identifier  "Keyboard0"
>> >> 	Driver      "kbd"
>> >> EndSection
>> >>
>> >> #Section "InputDevice"
>> >> #	Identifier  "Mouse0"
>> >> #	Driver      "mouse"
>> >> #	Option	    "Protocol" "auto"
>> >> #	Option	    "Device" "/dev/sysmouse"
>> >> #	Option	    "ZAxisMapping" "4 5 6 7"
>> >> #EndSection
>> >>
>> >> Section "InputDevice"
>> >> 	Identifier  "Synaptics_Touchpad"
>> >> 	Driver      "synaptics"
>> >>
>> >> 	Option      "Device"                "/dev/psm0"
>> >> 	Option      "Protocol"              "psm"
>> >>
>> >> 	Option      "LeftEdge"              "1400"
>> >> 	Option      "RightEdge"             "5600"
>> >> 	Option      "TopEdge"               "1400"
>> >> 	Option      "BottomEdge"            "4700"
>> >>
>> >> 	Option      "FingerLow"             "25"
>> >> 	Option      "FingerHigh"            "30"
>> >>
>> >> 	Option      "MaxTapTime"            "180"
>> >> 	Option      "MaxTapMove"            "220"
>> >>
>> >> 	Option      "VertScrollDelta"       "100"
>> >> 	Option      "HorizScrollDelta"      "100"
>> >>
>> >> 	Option      "MinSpeed"              "0.1"
>> >> 	Option      "MaxSpeed"              "0.25"
>> >> 	Option      "AccelFactor"           "0.0010"
>> >> 	Option      "FastTaps"              "off"
>> >>
>> >> 	Option      "ScrollButtonRepeat"    "100"
>> >> 	Option      "UpDownScrolling"       "on"
>> >> 	Option      "UpDownRepeat"          "on"
>> >> 	Option      "LeftRightScrolling"    "on"
>> >> 	Option      "LeftRightRepeat"       "on"
>> >>
>> >> 	Option      "TapButton1"            "0"
>> >> 	Option      "TapButton2"            "0"
>> >> 	Option      "TapButton3"            "0"
>> >>
>> >> 	# "SHMConfig on" seems good works with synclient(1).  But this
>> >> 	# options is insecure.  I recommended "off" as default.
>> >> 	Option      "SHMConfig"             "on"
>> >>
>> >> 	# If you use circular touchpad, uncomment them.
>> >> 	#Option          "CircularPad"           "on"
>> >> 	#Option          "CircularScrolling"     "on"
>> >> 	#Option          "CircScrollDelta"       "0.5"
>> >> EndSection
>> >>
>> >> Section "Monitor"
>> >> 	Identifier   "Monitor0"
>> >> 	VendorName   "Monitor Vendor"
>> >> 	ModelName    "Monitor Model"
>> >> 	Option       "DPMS"
>> >> EndSection
>> >>
>> >> Section "Device"
>> >>         ### Available Driver options are:-
>> >>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>> >>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>> >>         ### [arg]: arg optional
>> >>         #Option     "SWcursor"           	# [<bool>]
>> >>         #Option     "HWcursor"           	# [<bool>]
>> >>         #Option     "NoAccel"            	# [<bool>]
>> >>         #Option     "ShadowFB"           	# [<bool>]
>> >>         #Option     "UseFBDev"           	# [<bool>]
>> >>         #Option     "Rotate"             	# [<str>]
>> >>         #Option     "VideoKey"           	# <i>
>> >>         #Option     "FlatPanel"          	# [<bool>]
>> >>         #Option     "FPDither"           	# [<bool>]
>> >>         #Option     "CrtcNumber"         	# <i>
>> >>         #Option     "FPScale"            	# [<bool>]
>> >>         #Option     "FPTweak"            	# <i>
>> >>         #Option     "DualHead"           	# [<bool>]
>> >> 	Option      "UseEdidDpi" "false"
>> >> 	Option      "DPI" "96 x 96"
>> >> 	Identifier  "Card0"
>> >> 	Driver      "nv"
>> >> 	VendorName  "nVidia Corporation"
>> >> 	BoardName   "Quadro NVS 140M"
>> >> 	BusID       "PCI:1:0:0"
>> >> EndSection
>> >>
>> >> Section "DRI"
>> >> 	Mode 0666
>> >> EndSection
>> >>
>> >> Section "Screen"
>> >> 	Identifier "Screen0"
>> >> 	Device     "Card0"
>> >> 	Monitor    "Monitor0"
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     1
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     4
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     8
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     15
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     16
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     24
>> >> 		Modes     "1440x900"
>> >> 	EndSubSection
>> >> EndSection
>> >>
>> >> plain text document attachment (xorg.nouveau.conf)
>> >> Section "ServerLayout"
>> >> 	Identifier     "X.org Configured"
>> >> 	Screen      0  "Screen0" 0 0
>> >> #	InputDevice    "Mouse0" "CorePointer"
>> >> 	InputDevice    "Synaptics_Touchpad" "CorePointer"
>> >> 	InputDevice    "Keyboard0" "CoreKeyboard"
>> >> 	Option         "DontZap" "Off"
>> >> 	Option         "AIGLX" "true"
>> >> EndSection
>> >>
>> >> Section "Extensions"
>> >> 	Option       "Composite" "Enable"
>> >> 	Option       "XVideo" "Enable"
>> >> EndSection
>> >>
>> >> Section "Files"
>> >> 	ModulePath   "/usr/local/lib/xorg/modules"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/misc/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/TTF/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/OTF"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/Type1/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/URW/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/freefont/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
>> >> EndSection
>> >>
>> >> Section "Module"
>> >> 	Load  "extmod"
>> >> 	Load  "record"
>> >> 	Load  "dbe"
>> >> 	Load  "glx"
>> >> 	Load  "dri"
>> >> 	Load  "dri2"
>> >> 	Load  "synaptics"
>> >> EndSection
>> >>
>> >> #Section "ServerFlags"
>> >> #	Option      "AllowEmptyInput"
>> >> #EndSection
>> >>
>> >> Section "InputDevice"
>> >> 	Identifier  "Keyboard0"
>> >> 	Driver      "kbd"
>> >> EndSection
>> >>
>> >> #Section "InputDevice"
>> >> #	Identifier  "Mouse0"
>> >> #	Driver      "mouse"
>> >> #	Option	    "Protocol" "auto"
>> >> #	Option	    "Device" "/dev/sysmouse"
>> >> #	Option	    "ZAxisMapping" "4 5 6 7"
>> >> #EndSection
>> >>
>> >> Section "InputDevice"
>> >> 	Identifier  "Synaptics_Touchpad"
>> >> 	Driver      "synaptics"
>> >>
>> >> 	Option      "Device"                "/dev/psm0"
>> >> 	Option      "Protocol"              "psm"
>> >>
>> >> 	Option      "LeftEdge"              "1400"
>> >> 	Option      "RightEdge"             "5600"
>> >> 	Option      "TopEdge"               "1400"
>> >> 	Option      "BottomEdge"            "4700"
>> >>
>> >> 	Option      "FingerLow"             "25"
>> >> 	Option      "FingerHigh"            "30"
>> >>
>> >> 	Option      "MaxTapTime"            "180"
>> >> 	Option      "MaxTapMove"            "220"
>> >>
>> >> 	Option      "VertScrollDelta"       "100"
>> >> 	Option      "HorizScrollDelta"      "100"
>> >>
>> >> 	Option      "MinSpeed"              "0.25"
>> >> 	Option      "MaxSpeed"              "0.5"
>> >> 	Option      "AccelFactor"           "0.0010"
>> >> 	Option      "FastTaps"              "off"
>> >>
>> >> 	Option      "ScrollButtonRepeat"    "100"
>> >> 	Option      "UpDownScrolling"       "on"
>> >> 	Option      "UpDownRepeat"          "on"
>> >> 	Option      "LeftRightScrolling"    "on"
>> >> 	Option      "LeftRightRepeat"       "on"
>> >>
>> >> 	Option      "TapButton1"            "0"
>> >> 	Option      "TapButton2"            "0"
>> >> 	Option      "TapButton3"            "0"
>> >>
>> >> 	# "SHMConfig on" seems good works with synclient(1).  But this
>> >> 	# options is insecure.  I recommended "off" as default.
>> >> 	Option      "SHMConfig"             "on"
>> >>
>> >> 	# If you use circular touchpad, uncomment them.
>> >> 	#Option          "CircularPad"           "on"
>> >> 	#Option          "CircularScrolling"     "on"
>> >> 	#Option          "CircScrollDelta"       "0.5"
>> >> EndSection
>> >>
>> >> Section "Monitor"
>> >> 	Identifier   "Monitor0"
>> >> 	VendorName   "Monitor Vendor"
>> >> 	ModelName    "Monitor Model"
>> >> 	Option       "DPMS"
>> >> EndSection
>> >>
>> >> Section "Device"
>> >>         ### Available Driver options are:-
>> >>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>> >>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>> >>         ### [arg]: arg optional
>> >>         #Option     "SWcursor"           	# [<bool>]
>> >>         #Option     "HWcursor"           	# [<bool>]
>> >>         #Option     "NoAccel"            	# [<bool>]
>> >>         #Option     "ShadowFB"           	# [<bool>]
>> >>         #Option     "UseFBDev"           	# [<bool>]
>> >>         #Option     "Rotate"             	# [<str>]
>> >>         #Option     "VideoKey"           	# <i>
>> >>         #Option     "FlatPanel"          	# [<bool>]
>> >>         #Option     "FPDither"           	# [<bool>]
>> >>         #Option     "CrtcNumber"         	# <i>
>> >>         #Option     "FPScale"            	# [<bool>]
>> >>         #Option     "FPTweak"            	# <i>
>> >>         #Option     "DualHead"           	# [<bool>]
>> >> 	Option      "UseEdidDpi" "false"
>> >> 	Option      "DPI" "96 x 96"
>> >> 	Identifier  "Card0"
>> >> 	Driver      "nouveau"
>> >> 	VendorName  "nVidia Corporation"
>> >> 	BoardName   "Quadro NVS 140M"
>> >> 	BusID       "PCI:1:0:0"
>> >> 	Option      "AccelMethod" "EXA"
>> >> 	Option      "EXANoComposite" "false"
>> >> 	Option      "FBTexPercent" "50"
>> >> 	Option      "MigrationHeuristic" "greedy"
>> >> 	Option      "DRI" "true
>> >> EndSection
>> >>
>> >> Section "DRI"
>> >> 	Mode 0666
>> >> EndSection
>> >>
>> >> Section "Screen"
>> >> 	Identifier "Screen0"
>> >> 	Device     "Card0"
>> >> 	Monitor    "Monitor0"
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     1
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     4
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     8
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     15
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     16
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     24
>> >> 		Modes     "1440x900"
>> >> 	EndSubSection
>> >> EndSection
>> >>
>> >> plain text document attachment (Xorg.0.nv.log)
>> >> X.Org X Server 1.6.0
>> >> Release Date: 2009-2-25
>> >> X Protocol Version 11, Revision 0
>> >> Build Operating System: FreeBSD 7.1-RELEASE-p4 amd64
>> >> Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4
>> >> FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009
>> >> root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>> >> Build Date: 17 May 2009  09:21:33PM
>> >>
>> >> 	Before reporting problems, check http://wiki.x.org
>> >> 	to make sure that you have the latest version.
>> >> Markers: (--) probed, (**) from config file, (==) default setting,
>> >> 	(++) from command line, (!!) notice, (II) informational,
>> >> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> >> (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 17 21:37:41 2009
>> >> (++) Using config file: "/etc/X11/xorg.conf"
>> >> (==) ServerLayout "X.org Configured"
>> >> (**) |-->Screen "Screen0" (0)
>> >> (**) |   |-->Monitor "Monitor0"
>> >> (**) |   |-->Device "Card0"
>> >> (**) |-->Input Device "Synaptics_Touchpad"
>> >> (**) |-->Input Device "Keyboard0"
>> >> (**) Option "AllowEmptyInput"
>> >> (==) Automatically adding devices
>> >> (==) Automatically enabling devices
>> >> (**) FontPath set to:
>> >> 	/usr/local/lib/X11/fonts/misc/,
>> >> 	/usr/local/lib/X11/fonts/TTF/,
>> >> 	/usr/local/lib/X11/fonts/OTF,
>> >> 	/usr/local/lib/X11/fonts/Type1/,
>> >> 	/usr/local/lib/X11/fonts/100dpi/,
>> >> 	/usr/local/lib/X11/fonts/75dpi/,
>> >> 	/usr/local/lib/X11/fonts/URW/,
>> >> 	/usr/local/lib/X11/fonts/freefont/,
>> >> 	/usr/local/lib/X11/fonts/TrueType/,
>> >> 	/usr/local/lib/X11/fonts/bitstream-vera/,
>> >> 	/usr/local/lib/X11/fonts/cyrillic/,
>> >> 	/usr/local/lib/X11/fonts/encodings/,
>> >> 	/usr/local/lib/X11/fonts/local/,
>> >> 	/usr/local/lib/X11/fonts/util/,
>> >> 	/usr/local/lib/X11/fonts/misc/,
>> >> 	/usr/local/lib/X11/fonts/TTF/,
>> >> 	/usr/local/lib/X11/fonts/OTF,
>> >> 	/usr/local/lib/X11/fonts/Type1/,
>> >> 	/usr/local/lib/X11/fonts/100dpi/,
>> >> 	/usr/local/lib/X11/fonts/75dpi/,
>> >> 	built-ins
>> >> (**) ModulePath set to "/usr/local/lib/xorg/modules"
>> >> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or
>> >> 'vmmouse' will be disabled.
>> >> (WW) Disabling Keyboard0
>> >> (II) Loader magic: 0x3b20
>> >> (II) Module ABI versions:
>> >> 	X.Org ANSI C Emulation: 0.4
>> >> 	X.Org Video Driver: 5.0
>> >> 	X.Org XInput driver : 4.0
>> >> 	X.Org Server Extension : 2.0
>> >> (II) Loader running on freebsd
>> >> (--) Using syscons driver with X support (version 2.0)
>> >> (--) using VT number 9
>> >>
>> >> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @
>> >> 0x????????/65536
>> >> (II) System resource ranges:
>> >> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>> >> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>> >> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> >> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>> >> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>> >> (II) "extmod" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "dbe" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "glx" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "record" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "dri" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "dri2" will be loaded by default.
>> >> (II) LoadModule: "extmod"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
>> >> (II) Module extmod: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	Module class: X.Org Server Extension
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension MIT-SCREEN-SAVER
>> >> (II) Loading extension XFree86-VidModeExtension
>> >> (II) Loading extension XFree86-DGA
>> >> (II) Loading extension DPMS
>> >> (II) Loading extension XVideo
>> >> (II) Loading extension XVideo-MotionCompensation
>> >> (II) Loading extension X-Resource
>> >> (II) LoadModule: "record"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
>> >> (II) Module record: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.13.0
>> >> 	Module class: X.Org Server Extension
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension RECORD
>> >> (II) LoadModule: "dbe"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
>> >> (II) Module dbe: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	Module class: X.Org Server Extension
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension DOUBLE-BUFFER
>> >> (II) LoadModule: "glx"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
>> >> (II) Module glx: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (==) AIGLX disabled
>> >> (II) Loading extension GLX
>> >> (II) LoadModule: "xtrap"
>> >> (WW) Warning, couldn't open module xtrap
>> >> (II) UnloadModule: "xtrap"
>> >> (EE) Failed to load module "xtrap" (module does not exist, 0)
>> >> (II) LoadModule: "dri"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
>> >> (II) Module dri: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension XFree86-DRI
>> >> (II) LoadModule: "freetype"
>> >> (WW) Warning, couldn't open module freetype
>> >> (II) UnloadModule: "freetype"
>> >> (EE) Failed to load module "freetype" (module does not exist, 0)
>> >> (II) LoadModule: "type1"
>> >> (WW) Warning, couldn't open module type1
>> >> (II) UnloadModule: "type1"
>> >> (EE) Failed to load module "type1" (module does not exist, 0)
>> >> (II) LoadModule: "synaptics"
>> >> (II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
>> >> (II) Module synaptics: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.1, module version = 1.1.0
>> >> 	Module class: X.Org XInput Driver
>> >> 	ABI class: X.Org XInput driver, version 4.0
>> >> (II) LoadModule: "dri2"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
>> >> (II) Module dri2: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension DRI2
>> >> (II) LoadModule: "nv"
>> >> (II) Loading /usr/local/lib/xorg/modules/drivers//nv_drv.so
>> >> (II) Module nv: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 2.1.13
>> >> 	Module class: X.Org Video Driver
>> >> 	ABI class: X.Org Video Driver, version 5.0
>> >> (II) LoadModule: "synaptics"
>> >> (II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
>> >> (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
>> >> 	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
>> >> 	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
>> >> 	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
>> >> 	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
>> >> 	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
>> >> 	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
>> >> 	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
>> >> 	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
>> >> 	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
>> >> 	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
>> >> 	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
>> >> 	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
>> >> 	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
>> >> 	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
>> >> 	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
>> >> 	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
>> >> 	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
>> >> 	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
>> >> 	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
>> >> 	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
>> >> 	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
>> >> 	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
>> >> 	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
>> >> 	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
>> >> 	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
>> >> 	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
>> >> 	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
>> >> 	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
>> >> 	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
>> >> 	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
>> >> 	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
>> >> 	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
>> >> 	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
>> >> 	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
>> >> 	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
>> >> 	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
>> >> 	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
>> >> 	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
>> >> 	GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
>> >> 	Quadro FX 540, GeForce 6200, GeForce 6500,
>> >> 	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
>> >> 	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
>> >> 	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
>> >> 	GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
>> >> 	GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
>> >> 	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
>> >> 	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
>> >> 	GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
>> >> 	GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
>> >> 	GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
>> >> 	GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
>> >> 	GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
>> >> 	Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
>> >> 	GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
>> >> 	GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
>> >> 	Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
>> >> 	Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
>> >> 	GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
>> >> 	GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
>> >> 	GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
>> >> 	GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
>> >> 	GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
>> >> 	Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
>> >> 	GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
>> >> 	GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
>> >> 	GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
>> >> 	GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
>> >> 	GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
>> >> 	GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
>> >> 	GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
>> >> 	GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
>> >> 	GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro FX 3600M,
>> >> 	GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
>> >> 	GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
>> >> 	GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
>> >> 	GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS,
>> >> 	GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M
>> >> (II) Primary Device is: PCI 01@00:00:0
>> >> (--) NV: Found NVIDIA Quadro NVS 140M at 01@00:00:0
>> >> (II) resource ranges after probing:
>> >> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>> >> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>> >> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> >> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>> >> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>> >> (II) Loading sub module "int10"
>> >> (II) LoadModule: "int10"
>> >> (II) Loading /usr/local/lib/xorg/modules//libint10.so
>> >> (II) Module int10: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	ABI class: X.Org Video Driver, version 5.0
>> >> (II) NV(0): Initializing int10
>> >> (==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
>> >> (==) NV(0): Write-combining range (0xc0000,0x40000) was already clear
>> >> (II) NV(0): Primary V_BIOS segment is: 0xc000
>> >> (==) NV(0): Write-combining range (0x0,0x1000) was already clear
>> >> (--) NV(0): Console is VGA mode 0x3
>> >> (==) NV(0): Depth 24, (--) framebuffer bpp 32
>> >> (==) NV(0): RGB weight 888
>> >> (==) NV(0): Default visual is TrueColor
>> >> (==) NV(0): Using hardware cursor
>> >> (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
>> >> (EE) NV(0): Failed to map MMIO registers: No such file or directory
>> >> (==) NV(0): Write-combining range (0x0,0x1000) was already clear
>> >> (II) UnloadModule: "nv"
>> >> (II) UnloadModule: "int10"
>> >> (II) Unloading /usr/local/lib/xorg/modules//libint10.so
>> >> (EE) Screen(s) found, but none have a usable configuration.
>> >>
>> >> Fatal server error:
>> >> no screens found
>> >>
>> >> Please consult the The X.Org Foundation support
>> >> 	 at http://wiki.x.org
>> >>  for help.
>> >> Please also check the log file at "/var/log/Xorg.0.log" for additional
>> >> information.
>> >>
>> >> _______________________________________________
>> >> freebsd-x11@freebsd.org mailing list
>> >> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
>> >> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
>> _______________________________________________
>> freebsd-x11@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
>> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
> --
> Robert Noland <rnoland@FreeBSD.org>
> FreeBSD
>


-- 
Paul
From onemda at gmail.com  Wed May 27 22:35:03 2009
From: onemda at gmail.com (Paul B. Mahol)
Date: Wed May 27 22:35:10 2009
Subject: Problems with libpciaccess-0.10.6
In-Reply-To: <1243440584.2926.2403.camel@balrog.2hip.net>
References: <4A1D5FDD.9050306@irbisnet.com>
	<1243439705.2926.2387.camel@balrog.2hip.net>
	<4A1D6445.1080707@irbisnet.com>
	<1243440584.2926.2403.camel@balrog.2hip.net>
Message-ID: <3a142e750905271510s787d3572r9b0b25fea6510c66@mail.gmail.com>

On 5/27/09, Robert Noland <rnoland@freebsd.org> wrote:
> On Wed, 2009-05-27 at 12:03 -0400, Andriy Bakay wrote:
>> Unfortunately, X server did not store core dump. If you give me options
>> which will force X server to make core dump then I can try to reproduce
>> it again.
>
>        Option "NoTrapSignals"  "boolean"
>               This prevents the Xorg server from trapping  a  range  of
> unex-
>               pected  fatal  signals  and  exiting cleanly.  Instead,
> the Xorg
>               server will die and drop core where  the  fault  occurred.
> The
>               default  behaviour  is  for the Xorg server to exit
> cleanly, but
>               still drop a core file.  In general you never want to  use
> this
>               option  unless you are debugging an Xorg server problem
> and know
>               how to deal with the consequences.
>
> robert.

And kern.sugid_coredump=1 sysctl, if Xorg is installed with setuid bit.
>
>> Robert Noland wrote:
>> > On Wed, 2009-05-27 at 11:44 -0400, Andriy Bakay wrote:
>> >> Hi X11 Team,
>> >>
>> >> Recently I tried to upgrade to 'libpciaccess-0.10.6' port on my laptop:
>> >>
>> >> ThinkPad T61, FreeBSD 7.1 amd64, nVidia Quadro NVS 140M. And my X
>> >> (xorg-server-1.6.0,1) server crashed during startup (see attached
>> >> logs).
>> >> I tried 'xorg-server-1.6.1' and two different nVidia drivers 'nv' and
>> >> 'nouveau' same crash, but with different log entries. After I downgrade
>> >>
>> >> to 'libpciaccess-0.10.5_6' port both drivers working fine. I attached
>> >> the X server logs and configs for both nVidia drivers:
>> >
>> > Hrm, I really didn't think that much changed with 0.10.6.  Any chance
>> > you can get a backtrace from the X server?
>> >
>> > robert.
>> >
>> >> nv:      Xorg.0.nv.log, xorg.nv.conf
>> >> nouveau: Xorg.0.nouveau.log, xorg.nouveau.conf
>> >>
>> >> Please, advise.
>> >>
>> >> Thanks,
>> >> Andriy
>> >> plain text document attachment (Xorg.0.nouveau.log)
>> >> X.Org X Server 1.6.0
>> >> Release Date: 2009-2-25
>> >> X Protocol Version 11, Revision 0
>> >> Build Operating System: FreeBSD 7.0-RELEASE amd64
>> >> Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4
>> >> FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009
>> >> root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>> >> Build Date: 12 April 2009  03:12:50PM
>> >>
>> >> 	Before reporting problems, check http://wiki.x.org
>> >> 	to make sure that you have the latest version.
>> >> Markers: (--) probed, (**) from config file, (==) default setting,
>> >> 	(++) from command line, (!!) notice, (II) informational,
>> >> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> >> (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 23 21:47:12 2009
>> >> (==) Using config file: "/etc/X11/xorg.conf"
>> >> (==) ServerLayout "X.org Configured"
>> >> (**) |-->Screen "Screen0" (0)
>> >> (**) |   |-->Monitor "Monitor0"
>> >> (**) |   |-->Device "Card0"
>> >> (**) |-->Input Device "Synaptics_Touchpad"
>> >> (**) |-->Input Device "Keyboard0"
>> >> (**) Option "DontZap" "Off"
>> >> (**) Option "AIGLX" "true"
>> >> (==) Automatically adding devices
>> >> (==) Automatically enabling devices
>> >> (**) FontPath set to:
>> >> 	/usr/local/lib/X11/fonts/misc/,
>> >> 	/usr/local/lib/X11/fonts/TTF/,
>> >> 	/usr/local/lib/X11/fonts/OTF,
>> >> 	/usr/local/lib/X11/fonts/Type1/,
>> >> 	/usr/local/lib/X11/fonts/100dpi/,
>> >> 	/usr/local/lib/X11/fonts/75dpi/,
>> >> 	/usr/local/lib/X11/fonts/URW/,
>> >> 	/usr/local/lib/X11/fonts/freefont/,
>> >> 	/usr/local/lib/X11/fonts/TrueType/,
>> >> 	/usr/local/lib/X11/fonts/bitstream-vera/,
>> >> 	/usr/local/lib/X11/fonts/cyrillic/,
>> >> 	/usr/local/lib/X11/fonts/misc/,
>> >> 	/usr/local/lib/X11/fonts/TTF/,
>> >> 	/usr/local/lib/X11/fonts/OTF,
>> >> 	/usr/local/lib/X11/fonts/Type1/,
>> >> 	/usr/local/lib/X11/fonts/100dpi/,
>> >> 	/usr/local/lib/X11/fonts/75dpi/,
>> >> 	built-ins
>> >> (**) ModulePath set to "/usr/local/lib/xorg/modules"
>> >> (**) Extension "Composite" is enabled
>> >> (**) Extension "XVideo" is enabled
>> >> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or
>> >> 'vmmouse' will be disabled.
>> >> (WW) Disabling Keyboard0
>> >> (II) Loader magic: 0xb20
>> >> (II) Module ABI versions:
>> >> 	X.Org ANSI C Emulation: 0.4
>> >> 	X.Org Video Driver: 5.0
>> >> 	X.Org XInput driver : 4.0
>> >> 	X.Org Server Extension : 2.0
>> >> (II) Loader running on freebsd
>> >> (--) Using syscons driver with X support (version 2.0)
>> >> (--) using VT number 9
>> >>
>> >> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @
>> >> 0x????????/65536
>> >> (II) System resource ranges:
>> >> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>> >> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>> >> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> >> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>> >> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>> >> (II) "extmod" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "dbe" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "glx" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "record" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "dri" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "dri2" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) LoadModule: "extmod"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
>> >> (II) Module extmod: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	Module class: X.Org Server Extension
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension MIT-SCREEN-SAVER
>> >> (II) Loading extension XFree86-VidModeExtension
>> >> (II) Loading extension XFree86-DGA
>> >> (II) Loading extension DPMS
>> >> (II) Loading extension XVideo
>> >> (II) Loading extension XVideo-MotionCompensation
>> >> (II) Loading extension X-Resource
>> >> (II) LoadModule: "record"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
>> >> (II) Module record: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.13.0
>> >> 	Module class: X.Org Server Extension
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension RECORD
>> >> (II) LoadModule: "dbe"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
>> >> (II) Module dbe: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	Module class: X.Org Server Extension
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension DOUBLE-BUFFER
>> >> (II) LoadModule: "glx"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
>> >> (II) Module glx: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (**) AIGLX enabled
>> >> (II) Loading extension GLX
>> >> (II) LoadModule: "dri"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
>> >> (II) Module dri: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension XFree86-DRI
>> >> (II) LoadModule: "dri2"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
>> >> (II) Module dri2: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension DRI2
>> >> (II) LoadModule: "synaptics"
>> >> (II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
>> >> (II) Module synaptics: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 0.99.3
>> >> 	Module class: X.Org XInput Driver
>> >> 	ABI class: X.Org XInput driver, version 4.0
>> >> (II) LoadModule: "nouveau"
>> >> (II) Loading /usr/local/lib/xorg/modules/drivers//nouveau_drv.so
>> >> (II) Module nouveau: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 0.0.10
>> >> 	Module class: X.Org Video Driver
>> >> 	ABI class: X.Org Video Driver, version 5.0
>> >> (II) LoadModule: "synaptics"
>> >> (II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
>> >> (II) NOUVEAU driver 20090514.9656762
>> >> (II) NOUVEAU driver for NVIDIA chipset families :
>> >> 	RIVA TNT    (NV04)
>> >> 	RIVA TNT2   (NV05)
>> >> 	GeForce 256 (NV10)
>> >> 	GeForce 2   (NV11, NV15)
>> >> 	GeForce 4MX (NV17, NV18)
>> >> 	GeForce 3   (NV20)
>> >> 	GeForce 4Ti (NV25, NV28)
>> >> 	GeForce FX  (NV3x)
>> >> 	GeForce 6   (NV4x)
>> >> 	GeForce 7   (G7x)
>> >> 	GeForce 8   (G8x)
>> >> (II) Primary Device is: PCI 01@00:00:0
>> >>
>> >> Fatal server error:
>> >> Caught signal 11.  Server aborting
>> >>
>> >>
>> >> Please consult the The X.Org Foundation support
>> >> 	 at http://wiki.x.org
>> >>  for help.
>> >> Please also check the log file at "/var/log/Xorg.0.log" for additional
>> >> information.
>> >>
>> >> plain text document attachment (xorg.nv.conf)
>> >> Section "ServerLayout"
>> >> 	Identifier     "X.org Configured"
>> >> 	Screen      0  "Screen0" 0 0
>> >> #	InputDevice    "Mouse0" "CorePointer"
>> >> 	InputDevice    "Synaptics_Touchpad" "CorePointer"
>> >> 	InputDevice    "Keyboard0" "CoreKeyboard"
>> >> 	Option         "DontZap" "Off"
>> >> 	Option         "AIGLX" "true"
>> >> EndSection
>> >>
>> >> Section "Extensions"
>> >> 	Option       "Composite" "Enable"
>> >> 	Option       "XVideo" "Enable"
>> >> EndSection
>> >>
>> >> Section "Files"
>> >> 	ModulePath   "/usr/local/lib/xorg/modules"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/misc/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/TTF/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/OTF"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/Type1/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/URW/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/freefont/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
>> >> EndSection
>> >>
>> >> Section "Module"
>> >> 	Load  "extmod"
>> >> 	Load  "record"
>> >> 	Load  "dbe"
>> >> 	Load  "glx"
>> >> 	Load  "dri"
>> >> 	Load  "dri2"
>> >> 	Load  "synaptics"
>> >> EndSection
>> >>
>> >> #Section "ServerFlags"
>> >> #	Option      "AllowEmptyInput"
>> >> #EndSection
>> >>
>> >> Section "InputDevice"
>> >> 	Identifier  "Keyboard0"
>> >> 	Driver      "kbd"
>> >> EndSection
>> >>
>> >> #Section "InputDevice"
>> >> #	Identifier  "Mouse0"
>> >> #	Driver      "mouse"
>> >> #	Option	    "Protocol" "auto"
>> >> #	Option	    "Device" "/dev/sysmouse"
>> >> #	Option	    "ZAxisMapping" "4 5 6 7"
>> >> #EndSection
>> >>
>> >> Section "InputDevice"
>> >> 	Identifier  "Synaptics_Touchpad"
>> >> 	Driver      "synaptics"
>> >>
>> >> 	Option      "Device"                "/dev/psm0"
>> >> 	Option      "Protocol"              "psm"
>> >>
>> >> 	Option      "LeftEdge"              "1400"
>> >> 	Option      "RightEdge"             "5600"
>> >> 	Option      "TopEdge"               "1400"
>> >> 	Option      "BottomEdge"            "4700"
>> >>
>> >> 	Option      "FingerLow"             "25"
>> >> 	Option      "FingerHigh"            "30"
>> >>
>> >> 	Option      "MaxTapTime"            "180"
>> >> 	Option      "MaxTapMove"            "220"
>> >>
>> >> 	Option      "VertScrollDelta"       "100"
>> >> 	Option      "HorizScrollDelta"      "100"
>> >>
>> >> 	Option      "MinSpeed"              "0.1"
>> >> 	Option      "MaxSpeed"              "0.25"
>> >> 	Option      "AccelFactor"           "0.0010"
>> >> 	Option      "FastTaps"              "off"
>> >>
>> >> 	Option      "ScrollButtonRepeat"    "100"
>> >> 	Option      "UpDownScrolling"       "on"
>> >> 	Option      "UpDownRepeat"          "on"
>> >> 	Option      "LeftRightScrolling"    "on"
>> >> 	Option      "LeftRightRepeat"       "on"
>> >>
>> >> 	Option      "TapButton1"            "0"
>> >> 	Option      "TapButton2"            "0"
>> >> 	Option      "TapButton3"            "0"
>> >>
>> >> 	# "SHMConfig on" seems good works with synclient(1).  But this
>> >> 	# options is insecure.  I recommended "off" as default.
>> >> 	Option      "SHMConfig"             "on"
>> >>
>> >> 	# If you use circular touchpad, uncomment them.
>> >> 	#Option          "CircularPad"           "on"
>> >> 	#Option          "CircularScrolling"     "on"
>> >> 	#Option          "CircScrollDelta"       "0.5"
>> >> EndSection
>> >>
>> >> Section "Monitor"
>> >> 	Identifier   "Monitor0"
>> >> 	VendorName   "Monitor Vendor"
>> >> 	ModelName    "Monitor Model"
>> >> 	Option       "DPMS"
>> >> EndSection
>> >>
>> >> Section "Device"
>> >>         ### Available Driver options are:-
>> >>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>> >>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>> >>         ### [arg]: arg optional
>> >>         #Option     "SWcursor"           	# [<bool>]
>> >>         #Option     "HWcursor"           	# [<bool>]
>> >>         #Option     "NoAccel"            	# [<bool>]
>> >>         #Option     "ShadowFB"           	# [<bool>]
>> >>         #Option     "UseFBDev"           	# [<bool>]
>> >>         #Option     "Rotate"             	# [<str>]
>> >>         #Option     "VideoKey"           	# <i>
>> >>         #Option     "FlatPanel"          	# [<bool>]
>> >>         #Option     "FPDither"           	# [<bool>]
>> >>         #Option     "CrtcNumber"         	# <i>
>> >>         #Option     "FPScale"            	# [<bool>]
>> >>         #Option     "FPTweak"            	# <i>
>> >>         #Option     "DualHead"           	# [<bool>]
>> >> 	Option      "UseEdidDpi" "false"
>> >> 	Option      "DPI" "96 x 96"
>> >> 	Identifier  "Card0"
>> >> 	Driver      "nv"
>> >> 	VendorName  "nVidia Corporation"
>> >> 	BoardName   "Quadro NVS 140M"
>> >> 	BusID       "PCI:1:0:0"
>> >> EndSection
>> >>
>> >> Section "DRI"
>> >> 	Mode 0666
>> >> EndSection
>> >>
>> >> Section "Screen"
>> >> 	Identifier "Screen0"
>> >> 	Device     "Card0"
>> >> 	Monitor    "Monitor0"
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     1
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     4
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     8
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     15
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     16
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     24
>> >> 		Modes     "1440x900"
>> >> 	EndSubSection
>> >> EndSection
>> >>
>> >> plain text document attachment (xorg.nouveau.conf)
>> >> Section "ServerLayout"
>> >> 	Identifier     "X.org Configured"
>> >> 	Screen      0  "Screen0" 0 0
>> >> #	InputDevice    "Mouse0" "CorePointer"
>> >> 	InputDevice    "Synaptics_Touchpad" "CorePointer"
>> >> 	InputDevice    "Keyboard0" "CoreKeyboard"
>> >> 	Option         "DontZap" "Off"
>> >> 	Option         "AIGLX" "true"
>> >> EndSection
>> >>
>> >> Section "Extensions"
>> >> 	Option       "Composite" "Enable"
>> >> 	Option       "XVideo" "Enable"
>> >> EndSection
>> >>
>> >> Section "Files"
>> >> 	ModulePath   "/usr/local/lib/xorg/modules"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/misc/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/TTF/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/OTF"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/Type1/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/100dpi/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/75dpi/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/URW/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/freefont/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/TrueType/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
>> >> 	FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
>> >> EndSection
>> >>
>> >> Section "Module"
>> >> 	Load  "extmod"
>> >> 	Load  "record"
>> >> 	Load  "dbe"
>> >> 	Load  "glx"
>> >> 	Load  "dri"
>> >> 	Load  "dri2"
>> >> 	Load  "synaptics"
>> >> EndSection
>> >>
>> >> #Section "ServerFlags"
>> >> #	Option      "AllowEmptyInput"
>> >> #EndSection
>> >>
>> >> Section "InputDevice"
>> >> 	Identifier  "Keyboard0"
>> >> 	Driver      "kbd"
>> >> EndSection
>> >>
>> >> #Section "InputDevice"
>> >> #	Identifier  "Mouse0"
>> >> #	Driver      "mouse"
>> >> #	Option	    "Protocol" "auto"
>> >> #	Option	    "Device" "/dev/sysmouse"
>> >> #	Option	    "ZAxisMapping" "4 5 6 7"
>> >> #EndSection
>> >>
>> >> Section "InputDevice"
>> >> 	Identifier  "Synaptics_Touchpad"
>> >> 	Driver      "synaptics"
>> >>
>> >> 	Option      "Device"                "/dev/psm0"
>> >> 	Option      "Protocol"              "psm"
>> >>
>> >> 	Option      "LeftEdge"              "1400"
>> >> 	Option      "RightEdge"             "5600"
>> >> 	Option      "TopEdge"               "1400"
>> >> 	Option      "BottomEdge"            "4700"
>> >>
>> >> 	Option      "FingerLow"             "25"
>> >> 	Option      "FingerHigh"            "30"
>> >>
>> >> 	Option      "MaxTapTime"            "180"
>> >> 	Option      "MaxTapMove"            "220"
>> >>
>> >> 	Option      "VertScrollDelta"       "100"
>> >> 	Option      "HorizScrollDelta"      "100"
>> >>
>> >> 	Option      "MinSpeed"              "0.25"
>> >> 	Option      "MaxSpeed"              "0.5"
>> >> 	Option      "AccelFactor"           "0.0010"
>> >> 	Option      "FastTaps"              "off"
>> >>
>> >> 	Option      "ScrollButtonRepeat"    "100"
>> >> 	Option      "UpDownScrolling"       "on"
>> >> 	Option      "UpDownRepeat"          "on"
>> >> 	Option      "LeftRightScrolling"    "on"
>> >> 	Option      "LeftRightRepeat"       "on"
>> >>
>> >> 	Option      "TapButton1"            "0"
>> >> 	Option      "TapButton2"            "0"
>> >> 	Option      "TapButton3"            "0"
>> >>
>> >> 	# "SHMConfig on" seems good works with synclient(1).  But this
>> >> 	# options is insecure.  I recommended "off" as default.
>> >> 	Option      "SHMConfig"             "on"
>> >>
>> >> 	# If you use circular touchpad, uncomment them.
>> >> 	#Option          "CircularPad"           "on"
>> >> 	#Option          "CircularScrolling"     "on"
>> >> 	#Option          "CircScrollDelta"       "0.5"
>> >> EndSection
>> >>
>> >> Section "Monitor"
>> >> 	Identifier   "Monitor0"
>> >> 	VendorName   "Monitor Vendor"
>> >> 	ModelName    "Monitor Model"
>> >> 	Option       "DPMS"
>> >> EndSection
>> >>
>> >> Section "Device"
>> >>         ### Available Driver options are:-
>> >>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>> >>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>> >>         ### [arg]: arg optional
>> >>         #Option     "SWcursor"           	# [<bool>]
>> >>         #Option     "HWcursor"           	# [<bool>]
>> >>         #Option     "NoAccel"            	# [<bool>]
>> >>         #Option     "ShadowFB"           	# [<bool>]
>> >>         #Option     "UseFBDev"           	# [<bool>]
>> >>         #Option     "Rotate"             	# [<str>]
>> >>         #Option     "VideoKey"           	# <i>
>> >>         #Option     "FlatPanel"          	# [<bool>]
>> >>         #Option     "FPDither"           	# [<bool>]
>> >>         #Option     "CrtcNumber"         	# <i>
>> >>         #Option     "FPScale"            	# [<bool>]
>> >>         #Option     "FPTweak"            	# <i>
>> >>         #Option     "DualHead"           	# [<bool>]
>> >> 	Option      "UseEdidDpi" "false"
>> >> 	Option      "DPI" "96 x 96"
>> >> 	Identifier  "Card0"
>> >> 	Driver      "nouveau"
>> >> 	VendorName  "nVidia Corporation"
>> >> 	BoardName   "Quadro NVS 140M"
>> >> 	BusID       "PCI:1:0:0"
>> >> 	Option      "AccelMethod" "EXA"
>> >> 	Option      "EXANoComposite" "false"
>> >> 	Option      "FBTexPercent" "50"
>> >> 	Option      "MigrationHeuristic" "greedy"
>> >> 	Option      "DRI" "true
>> >> EndSection
>> >>
>> >> Section "DRI"
>> >> 	Mode 0666
>> >> EndSection
>> >>
>> >> Section "Screen"
>> >> 	Identifier "Screen0"
>> >> 	Device     "Card0"
>> >> 	Monitor    "Monitor0"
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     1
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     4
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     8
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     15
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     16
>> >> 	EndSubSection
>> >> 	SubSection "Display"
>> >> 		Viewport   0 0
>> >> 		Depth     24
>> >> 		Modes     "1440x900"
>> >> 	EndSubSection
>> >> EndSection
>> >>
>> >> plain text document attachment (Xorg.0.nv.log)
>> >> X.Org X Server 1.6.0
>> >> Release Date: 2009-2-25
>> >> X Protocol Version 11, Revision 0
>> >> Build Operating System: FreeBSD 7.1-RELEASE-p4 amd64
>> >> Current Operating System: FreeBSD prime.irbisnet.com 7.1-RELEASE-p4
>> >> FreeBSD 7.1-RELEASE-p4 #0: Sun Mar 22 09:43:46 UTC 2009
>> >> root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>> >> Build Date: 17 May 2009  09:21:33PM
>> >>
>> >> 	Before reporting problems, check http://wiki.x.org
>> >> 	to make sure that you have the latest version.
>> >> Markers: (--) probed, (**) from config file, (==) default setting,
>> >> 	(++) from command line, (!!) notice, (II) informational,
>> >> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> >> (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 17 21:37:41 2009
>> >> (++) Using config file: "/etc/X11/xorg.conf"
>> >> (==) ServerLayout "X.org Configured"
>> >> (**) |-->Screen "Screen0" (0)
>> >> (**) |   |-->Monitor "Monitor0"
>> >> (**) |   |-->Device "Card0"
>> >> (**) |-->Input Device "Synaptics_Touchpad"
>> >> (**) |-->Input Device "Keyboard0"
>> >> (**) Option "AllowEmptyInput"
>> >> (==) Automatically adding devices
>> >> (==) Automatically enabling devices
>> >> (**) FontPath set to:
>> >> 	/usr/local/lib/X11/fonts/misc/,
>> >> 	/usr/local/lib/X11/fonts/TTF/,
>> >> 	/usr/local/lib/X11/fonts/OTF,
>> >> 	/usr/local/lib/X11/fonts/Type1/,
>> >> 	/usr/local/lib/X11/fonts/100dpi/,
>> >> 	/usr/local/lib/X11/fonts/75dpi/,
>> >> 	/usr/local/lib/X11/fonts/URW/,
>> >> 	/usr/local/lib/X11/fonts/freefont/,
>> >> 	/usr/local/lib/X11/fonts/TrueType/,
>> >> 	/usr/local/lib/X11/fonts/bitstream-vera/,
>> >> 	/usr/local/lib/X11/fonts/cyrillic/,
>> >> 	/usr/local/lib/X11/fonts/encodings/,
>> >> 	/usr/local/lib/X11/fonts/local/,
>> >> 	/usr/local/lib/X11/fonts/util/,
>> >> 	/usr/local/lib/X11/fonts/misc/,
>> >> 	/usr/local/lib/X11/fonts/TTF/,
>> >> 	/usr/local/lib/X11/fonts/OTF,
>> >> 	/usr/local/lib/X11/fonts/Type1/,
>> >> 	/usr/local/lib/X11/fonts/100dpi/,
>> >> 	/usr/local/lib/X11/fonts/75dpi/,
>> >> 	built-ins
>> >> (**) ModulePath set to "/usr/local/lib/xorg/modules"
>> >> (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or
>> >> 'vmmouse' will be disabled.
>> >> (WW) Disabling Keyboard0
>> >> (II) Loader magic: 0x3b20
>> >> (II) Module ABI versions:
>> >> 	X.Org ANSI C Emulation: 0.4
>> >> 	X.Org Video Driver: 5.0
>> >> 	X.Org XInput driver : 4.0
>> >> 	X.Org Server Extension : 2.0
>> >> (II) Loader running on freebsd
>> >> (--) Using syscons driver with X support (version 2.0)
>> >> (--) using VT number 9
>> >>
>> >> (--) PCI:*(0@1:0:0) nVidia Corporation Quadro NVS 140M rev 161, BIOS @
>> >> 0x????????/65536
>> >> (II) System resource ranges:
>> >> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>> >> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>> >> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> >> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>> >> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>> >> (II) "extmod" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "dbe" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "glx" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "record" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "dri" will be loaded. This was enabled by default and also
>> >> specified in the config file.
>> >> (II) "dri2" will be loaded by default.
>> >> (II) LoadModule: "extmod"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so
>> >> (II) Module extmod: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	Module class: X.Org Server Extension
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension MIT-SCREEN-SAVER
>> >> (II) Loading extension XFree86-VidModeExtension
>> >> (II) Loading extension XFree86-DGA
>> >> (II) Loading extension DPMS
>> >> (II) Loading extension XVideo
>> >> (II) Loading extension XVideo-MotionCompensation
>> >> (II) Loading extension X-Resource
>> >> (II) LoadModule: "record"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so
>> >> (II) Module record: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.13.0
>> >> 	Module class: X.Org Server Extension
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension RECORD
>> >> (II) LoadModule: "dbe"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so
>> >> (II) Module dbe: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	Module class: X.Org Server Extension
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension DOUBLE-BUFFER
>> >> (II) LoadModule: "glx"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so
>> >> (II) Module glx: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (==) AIGLX disabled
>> >> (II) Loading extension GLX
>> >> (II) LoadModule: "xtrap"
>> >> (WW) Warning, couldn't open module xtrap
>> >> (II) UnloadModule: "xtrap"
>> >> (EE) Failed to load module "xtrap" (module does not exist, 0)
>> >> (II) LoadModule: "dri"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so
>> >> (II) Module dri: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension XFree86-DRI
>> >> (II) LoadModule: "freetype"
>> >> (WW) Warning, couldn't open module freetype
>> >> (II) UnloadModule: "freetype"
>> >> (EE) Failed to load module "freetype" (module does not exist, 0)
>> >> (II) LoadModule: "type1"
>> >> (WW) Warning, couldn't open module type1
>> >> (II) UnloadModule: "type1"
>> >> (EE) Failed to load module "type1" (module does not exist, 0)
>> >> (II) LoadModule: "synaptics"
>> >> (II) Loading /usr/local/lib/xorg/modules/input//synaptics_drv.so
>> >> (II) Module synaptics: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.1, module version = 1.1.0
>> >> 	Module class: X.Org XInput Driver
>> >> 	ABI class: X.Org XInput driver, version 4.0
>> >> (II) LoadModule: "dri2"
>> >> (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so
>> >> (II) Module dri2: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	ABI class: X.Org Server Extension, version 2.0
>> >> (II) Loading extension DRI2
>> >> (II) LoadModule: "nv"
>> >> (II) Loading /usr/local/lib/xorg/modules/drivers//nv_drv.so
>> >> (II) Module nv: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 2.1.13
>> >> 	Module class: X.Org Video Driver
>> >> 	ABI class: X.Org Video Driver, version 5.0
>> >> (II) LoadModule: "synaptics"
>> >> (II) Reloading /usr/local/lib/xorg/modules/input//synaptics_drv.so
>> >> (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
>> >> 	Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
>> >> 	Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
>> >> 	GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
>> >> 	GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
>> >> 	Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
>> >> 	GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
>> >> 	GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
>> >> 	GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
>> >> 	GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
>> >> 	GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
>> >> 	GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
>> >> 	Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
>> >> 	GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
>> >> 	GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
>> >> 	GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
>> >> 	Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
>> >> 	GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
>> >> 	Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
>> >> 	GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
>> >> 	GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
>> >> 	GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
>> >> 	GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
>> >> 	GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
>> >> 	GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
>> >> 	Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
>> >> 	GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
>> >> 	GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
>> >> 	GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
>> >> 	GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
>> >> 	GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
>> >> 	Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
>> >> 	GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
>> >> 	GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
>> >> 	GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
>> >> 	GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
>> >> 	Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
>> >> 	GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
>> >> 	GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
>> >> 	GeForce Go 6600, GeForce Go 6600 GT, Quadro FX 550, Quadro FX 550,
>> >> 	Quadro FX 540, GeForce 6200, GeForce 6500,
>> >> 	GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
>> >> 	GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
>> >> 	GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
>> >> 	GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
>> >> 	GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
>> >> 	GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
>> >> 	GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7300 LE,
>> >> 	GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300, GeForce Go 7400,
>> >> 	GeForce Go 7400 GS, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
>> >> 	GeForce 7500 LE, Quadro FX 350, GeForce 7300 GS, GeForce 7600 GT,
>> >> 	GeForce 7600 GS, GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT,
>> >> 	GeForce Go 7700, GeForce Go 7600, GeForce Go 7600 GT,
>> >> 	Quadro NVS 300M, GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560,
>> >> 	GeForce 7900 GTX, GeForce 7900 GT, GeForce 7900 GS,
>> >> 	GeForce Go 7900 GS, GeForce Go 7900 GTX, Quadro FX 2500M,
>> >> 	Quadro FX 1500M, Quadro FX 5500, Quadro FX 3500, Quadro FX 1500,
>> >> 	Quadro FX 4500 X2, GeForce 6150, GeForce 6150 LE, GeForce 6100,
>> >> 	GeForce Go 6150, GeForce Go 6100, GeForce 8800 GTX, GeForce 8800 GTS,
>> >> 	GeForce 8800 Ultra, Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS,
>> >> 	GeForce 8600 GT, GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS,
>> >> 	GeForce 9500M GS, GeForce 8600M GT, GeForce 9650M GS,
>> >> 	GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
>> >> 	Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce 8400 SE,
>> >> 	GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS, GeForce 8400 GS,
>> >> 	GeForce 8600M GS, GeForce 8400M GT, GeForce 8400M GS,
>> >> 	GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M, Quadro NVS 135M,
>> >> 	GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G, Quadro NVS 290,
>> >> 	GeForce GTX 280, GeForce GTX 260, GeForce 8800 GTS 512,
>> >> 	GeForce 8800 GT, GeForce 9800 GX2, GeForce 8800 GS,
>> >> 	GeForce 8800M GTS, GeForce 8800M GTX, GeForce 8800 GS,
>> >> 	GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX,
>> >> 	GeForce 9800 GTK+, GeForce 9800 GT, Quadro FX 3700, Quadro FX 3600M,
>> >> 	GeForce 9600 GT, GeForce 9600 GS, GeForce 9800M GTS,
>> >> 	GeForce 9700M GTS, GeForce 9800M GTS, GeForce 9500 GT,
>> >> 	GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
>> >> 	GeForce 9500M G, GeForce 9300 GS, GeForce 8400 GS, GeForce 9300M GS,
>> >> 	GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M, Quadro NVS 160M
>> >> (II) Primary Device is: PCI 01@00:00:0
>> >> (--) NV: Found NVIDIA Quadro NVS 140M at 01@00:00:0
>> >> (II) resource ranges after probing:
>> >> 	[0] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>> >> 	[1] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>> >> 	[2] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>> >> 	[3] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>> >> 	[4] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>> >> (II) Loading sub module "int10"
>> >> (II) LoadModule: "int10"
>> >> (II) Loading /usr/local/lib/xorg/modules//libint10.so
>> >> (II) Module int10: vendor="X.Org Foundation"
>> >> 	compiled for 1.6.0, module version = 1.0.0
>> >> 	ABI class: X.Org Video Driver, version 5.0
>> >> (II) NV(0): Initializing int10
>> >> (==) NV(0): Write-combining range (0xa0000,0x20000) was already clear
>> >> (==) NV(0): Write-combining range (0xc0000,0x40000) was already clear
>> >> (II) NV(0): Primary V_BIOS segment is: 0xc000
>> >> (==) NV(0): Write-combining range (0x0,0x1000) was already clear
>> >> (--) NV(0): Console is VGA mode 0x3
>> >> (==) NV(0): Depth 24, (--) framebuffer bpp 32
>> >> (==) NV(0): RGB weight 888
>> >> (==) NV(0): Default visual is TrueColor
>> >> (==) NV(0): Using hardware cursor
>> >> (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
>> >> (EE) NV(0): Failed to map MMIO registers: No such file or directory
>> >> (==) NV(0): Write-combining range (0x0,0x1000) was already clear
>> >> (II) UnloadModule: "nv"
>> >> (II) UnloadModule: "int10"
>> >> (II) Unloading /usr/local/lib/xorg/modules//libint10.so
>> >> (EE) Screen(s) found, but none have a usable configuration.
>> >>
>> >> Fatal server error:
>> >> no screens found
>> >>
>> >> Please consult the The X.Org Foundation support
>> >> 	 at http://wiki.x.org
>> >>  for help.
>> >> Please also check the log file at "/var/log/Xorg.0.log" for additional
>> >> information.
>> >>
>> >> _______________________________________________
>> >> freebsd-x11@freebsd.org mailing list
>> >> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
>> >> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
>> _______________________________________________
>> freebsd-x11@freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
>> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
> --
> Robert Noland <rnoland@FreeBSD.org>
> FreeBSD
>


-- 
Paul
From perryh at pluto.rain.com  Thu May 28 09:20:50 2009
From: perryh at pluto.rain.com (perryh@pluto.rain.com)
Date: Thu May 28 09:20:56 2009
Subject: re-probing DDC/EDID
In-Reply-To: <1243432390.2926.2253.camel@balrog.2hip.net>
References: <4a164879.9A1SKOjgHUb7X9q6%perryh@pluto.rain.com>
	<1243015185.63754.104.camel@balrog.2hip.net>
	<4a1724c4.OuQCIyZ462E1cHYx%perryh@pluto.rain.com>
	<1243089327.63754.1345.camel@balrog.2hip.net>
	<4a1a288f.Z0ZX9ngtqKNukKbL%perryh@pluto.rain.com>
	<1243259500.1787.986.camel@balrog.2hip.net>
	<4a1b09b3.ewnqp2rizVfsYpk5%perryh@pluto.rain.com>
	<1243293431.1704.387.camel@balrog.2hip.net>
	<4a1baf8e.Lz5OEp/BR3fkQ+QO%perryh@pluto.rain.com>
	<20090526051955.2c73ba62@sorrow.ashke.com>
	<4a1d0812.wF4v52gYoURjHyHb%perryh@pluto.rain.com>
	<1243432390.2926.2253.camel@balrog.2hip.net>
Message-ID: <4a1e55ef.XCmDqiqV9EoVzpCw%perryh@pluto.rain.com>

Robert Noland <rnoland@FreeBSD.org> wrote:

> So Adam just pointed out that you are still running 6.9...

Thanks for checking into it.  I'm certainly not surprised that newer
versions provide new capabilities :) but a bit disappointed to find
that this version can't re-probe the monitor -- at least not easily.
(I did some grepping around in the code, and decided fairly quickly
that there's good reason for non-gurus to stay out of it.  I think
I'll stick with command-line utilities and the kernel, which I have
some hope of understanding.)

> You really should update your installed ports to something more
> recent.  I was assuming that you were running relatively current
> ports.

This box is pretty well frozen, esp. WRT X, unless something comes
along that breaks it very badly and makes an update unavoidable.
As long as it ain't broke ...

Instead, at some point I will get around to installing something
much newer -- it would probably be 7.2 if I had time to pursue it
in the near term -- on a different box, and once it is working well
it may end up taking over this one's function.
From sv_00 at mail.ru  Thu May 28 13:18:51 2009
From: sv_00 at mail.ru (Alexander Klepikov)
Date: Thu May 28 13:18:58 2009
Subject: libX11 config failure
In-Reply-To: <9d5506db0903221931y760ba890o524894a0bf6187d3@mail.gmail.com>
References: <9d5506db0903221931y760ba890o524894a0bf6187d3@mail.gmail.com>
Message-ID: <23761588.post@talk.nabble.com>



Larry Gadallah wrote:
> 
> Dear x11@FreeBSD.org:
> 
> For some reason, configuration for libX11 fails on the current ports
> tree (fetched via portsnap). For your reference, I have attached the
> config.log file per the error messages below:
> 
> appending configuration tag "F77" to libtool
> checking for gcc... (cached) cc
> checking whether we are using the GNU C compiler... (cached) yes
> checking whether cc accepts -g... (cached) yes
> checking for cc option to accept ISO C89... (cached) none needed
> checking dependency style of cc... (cached) gcc3
> CWARNFLAGS+= -Wold-style-definition -Wdeclaration-after-statement: not
> found
> checking for cpp... /usr/bin/cpp
> checking if /usr/bin/cpp requires -undef... yes
> checking if /usr/bin/cpp requires -traditional... yes
> checking whether to use XCB... (cached) yes
> ./configure: 21141: Syntax error: word unexpected (expecting ")")
> ===>  Script "configure" failed unexpectedly.
> Please report the problem to x11@FreeBSD.org [maintainer] and attach the
> "/usr/ports/x11/libX11/work/libX11-1.2/config.log" including the output of
> the failure of your make command. Also, it might be a good idea to provide
> an overview of all packages installed on your system (e.g. an `ls
> /var/db/pkg`).
> *** Error code 1
> 

May be I am too late, but I hope my post will help someone. I had the same
issue. I fugured out that configure script does not find macros
PKG_CHECK_MODULES. That macros is in /PCBSD/local/share/aclocal/pkg.m4 . In
/usr/ports/libX11/Makefile you can see

ACLOCAL_AGRS = -I . -I ${LOCALBASE}/share/aclocal

But LOCALBASE equals to /usr/local/ and there is no
/usr/local/share/aclocal/pkg.m4 !!! 
So I just did

ln -s /PCBSD/local/share/aclocal/pkg.m4 /usr/local/share/aclocal/pkg.m4

and voila!
Also I found that some ports cannot find, for example, unzip. But 'which
unzip' shows... yes, /PCBSD/local/bin/unzip ! It looks like it was not a
very good idea to put files to /PCBSD.

With best wishes,
 Alexander Klepikov
-- 
View this message in context: http://www.nabble.com/libX11-config-failure-tp22653605p23761588.html
Sent from the freebsd-x11 mailing list archive at Nabble.com.

From linimon at FreeBSD.org  Thu May 28 19:34:46 2009
From: linimon at FreeBSD.org (linimon@FreeBSD.org)
Date: Thu May 28 19:35:02 2009
Subject: FreeBSD ports that you maintain which are currently marked broken
Message-ID: <20090528193445.372D91CD2E@mail.droso.net>

Dear FreeBSD port maintainer:

As part of an ongoing effort to reduce the number of problems in
the FreeBSD ports system, we periodically notify users of ports
that are marked as "broken" in their Makefiles.  In many cases
these ports are failing to compile on some subset of the FreeBSD
build environments.  The most common problem is that recent versions
of -CURRENT include gcc4.2, which is much stricter than older versions.
The next most common problem is that compiles succeed on the i386
architecture (e.g. the common Intel PC), but fail on one or more
of the other architectures due to assumptions about things such as
size of various types, byte-alignment issues, and so forth.

In occasional cases we see that the same port may have different
errors in different build environments.  The script that runs on the
build cluster uses heuristics to try to 'guess' the error type to
help you isolate problems, but it is only a rough guide.

One more note: on occasion, there are transient build errors seen
on the build farm.  Unfortunately, there is not yet any way for this
algorithm to tell the difference (humans are much, much better at
this kind of thing.)

The errors are listed below.  In the case where the same problem
exists on more than one build environment, the URL points to the
latest errorlog for that type.  (By 'build environment' here we
mean 'combination of 5.x/6.x/-current with target architecture'.)

(Note: the dates are included to help you to gauge whether or not
the error still applies to the latest version.  The program
that generates this report is not yet able to determine this
automatically.)

portname:           x11-drivers/xf86-video-vga
broken because:     Needs to be removed
build errors:       none.
overview:           http://portsmon.FreeBSD.org/portoverview.py?category=x11-drivers&portname=xf86-video-vga


If these errors are ones that you are already aware of, please
accept our apologies and ignore this message.  On the other hand, if
you no longer wish to maintain this port (or ports), please reply
with a message stating that, and accept our thanks for your efforts
in the past.

Every effort has been made to make sure that these error reports
really do correspond to a port that you maintain.  However, due to
the fact that this is an automated process, it may indeed generate
false matches.  If one of these errors fits that description,
please forward this email to the author of this software, Mark
Linimon <linimon@FreeBSD.org>, so that he can attempt to fix the
problem in the future.

Thanks for your efforts to help improve FreeBSD.
From QAT at FreeBSD.org  Thu May 28 23:17:58 2009
From: QAT at FreeBSD.org (QAT@FreeBSD.org)
Date: Thu May 28 23:18:15 2009
Subject: cvs commit: ports/x11/xkeyboard-config Makefile distinfo
	pkg-plist
In-Reply-To: <200905282220.n4SMKMFH014864@repoman.freebsd.org>
References: <200905282220.n4SMKMFH014864@repoman.freebsd.org>
Message-ID: <20090528231745.BEE6F39845@qat.tcbug.org>

The Restless Daemon identified a patch error while trying to build:
 xkeyboard-config-1.6 maintained by x11@FreeBSD.org
 Makefile ident: $FreeBSD: ports/x11/xkeyboard-config/Makefile,v 1.15 2009/05/28 22:20:22 rnoland Exp $

Excerpt from http://QAT.TecNik93.com/logs/7-STABLE-FPT-NPD/xkeyboard-config-1.6.log :

Spamming /etc/manpath.config... Done.
===>  Extracting for xkeyboard-config-1.6
=> MD5 Checksum OK for xkeyboard-config-1.6.tar.bz2.
=> SHA256 Checksum OK for xkeyboard-config-1.6.tar.bz2.
===>   xkeyboard-config-1.6 depends on file: /usr/local/bin/perl5.8.9 - found
Deleting perl-5.8.9_2
Removing stale symlinks from /usr/bin...
    Removing /usr/bin/perl
    Removing /usr/bin/perl5
Done.
Cleaning up /etc/make.conf... Done.
Cleaning up /etc/manpath.config... Done.
================================================================
====================<phase 3: make patch>====================
add_pkg perl-5.8.9_2.tbz
adding dependencies
pkg_add perl-5.8.9_2.tbz
Removing stale symlinks from /usr/bin...
    Skipping /usr/bin/perl
    Skipping /usr/bin/perl5
Done.
Creating various symlinks in /usr/bin...
    Symlinking /usr/local/bin/perl5.8.9 to /usr/bin/perl
    Symlinking /usr/local/bin/perl5.8.9 to /usr/bin/perl5
Done.
Cleaning up /etc/make.conf... Done.
Spamming /etc/make.conf... Done.
Cleaning up /etc/manpath.config... Done.
Spamming /etc/manpath.config... Done.
===>  Patching for xkeyboard-config-1.6
===>   xkeyboard-config-1.6 depends on file: /usr/local/bin/perl5.8.9 - found
===>  Applying FreeBSD patches for xkeyboard-config-1.6
Ignoring previously applied (or reversed) patch.
1 out of 1 hunks ignored--saving rejects to configure.rej
=> Patch patch-configure failed to apply cleanly.
*** Error code 1

Stop in /a/ports/x11/xkeyboard-config.
================================================================
build of /usr/ports/x11/xkeyboard-config ended at Thu May 28 23:17:43 UTC 2009

The tarballed WRKDIR can be found here:
http://QAT.TecNik93.com/wrkdirs/7-STABLE-FPT-NPD/xkeyboard-config-1.6.tbz

PortsMon page for the port:
http://portsmon.freebsd.org/portoverview.py?category=x11&portname=xkeyboard-config

The build which triggered this BotMail was done under
tinderbox-devel-3.2_4; dsversion: 3.2 on RELENG_7 on amd64, kern.smp.cpus: 4
with tinderd_flags="-nullfs -plistcheck -onceonly" and ccache support, with the
"official" up-to-date Ports Tree, with the following vars set:
NOPORTDOCS=yes,  NOPORTEXAMPLES=yes, NOPORTDATA=yes, FORCE_PACKAGE=yes.

A description of the testing process can be found here:
http://T32.TecNik93.com/FreeBSD/QA-Tindy/


Thanks for your work on making FreeBSD better,

--
QAT - your friendly neighborhood Daemon,
preparing  a heck of an error trapping system:
 - "HMC and EOI?"
 - "Halt, Melt and Catch fire or Execute Operator Immediately."

From QAT at FreeBSD.org  Fri May 29 00:43:03 2009
From: QAT at FreeBSD.org (QAT@FreeBSD.org)
Date: Fri May 29 00:43:20 2009
Subject: cvs commit: ports/x11/xkeyboard-config Makefile distinfo
	pkg-plist
In-Reply-To: <200905282220.n4SMKMFH014864@repoman.freebsd.org>
References: <200905282220.n4SMKMFH014864@repoman.freebsd.org>
Message-ID: <20090529004251.7632D39845@qat.tcbug.org>

The Restless Daemon identified a patch error while trying to build:
 xkeyboard-config-1.6 maintained by x11@FreeBSD.org
 Makefile ident: $FreeBSD: ports/x11/xkeyboard-config/Makefile,v 1.15 2009/05/28 22:20:22 rnoland Exp $

Excerpt from http://QAT.TecNik93.com/logs/7-STABLE-FPT-NPD/xkeyboard-config-1.6.log :

Spamming /etc/manpath.config... Done.
===>  Extracting for xkeyboard-config-1.6
=> MD5 Checksum OK for xkeyboard-config-1.6.tar.bz2.
=> SHA256 Checksum OK for xkeyboard-config-1.6.tar.bz2.
===>   xkeyboard-config-1.6 depends on file: /usr/local/bin/perl5.8.9 - found
Deleting perl-5.8.9_2
Removing stale symlinks from /usr/bin...
    Removing /usr/bin/perl
    Removing /usr/bin/perl5
Done.
Cleaning up /etc/make.conf... Done.
Cleaning up /etc/manpath.config... Done.
================================================================
====================<phase 3: make patch>====================
add_pkg perl-5.8.9_2.tbz
adding dependencies
pkg_add perl-5.8.9_2.tbz
Removing stale symlinks from /usr/bin...
    Skipping /usr/bin/perl
    Skipping /usr/bin/perl5
Done.
Creating various symlinks in /usr/bin...
    Symlinking /usr/local/bin/perl5.8.9 to /usr/bin/perl
    Symlinking /usr/local/bin/perl5.8.9 to /usr/bin/perl5
Done.
Cleaning up /etc/make.conf... Done.
Spamming /etc/make.conf... Done.
Cleaning up /etc/manpath.config... Done.
Spamming /etc/manpath.config... Done.
===>  Patching for xkeyboard-config-1.6
===>   xkeyboard-config-1.6 depends on file: /usr/local/bin/perl5.8.9 - found
===>  Applying FreeBSD patches for xkeyboard-config-1.6
Ignoring previously applied (or reversed) patch.
1 out of 1 hunks ignored--saving rejects to configure.rej
=> Patch patch-configure failed to apply cleanly.
*** Error code 1

Stop in /a/ports/x11/xkeyboard-config.
================================================================
build of /usr/ports/x11/xkeyboard-config ended at Fri May 29 00:42:49 UTC 2009

The tarballed WRKDIR can be found here:
http://QAT.TecNik93.com/wrkdirs/7-STABLE-FPT-NPD/xkeyboard-config-1.6.tbz

PortsMon page for the port:
http://portsmon.freebsd.org/portoverview.py?category=x11&portname=xkeyboard-config

The build which triggered this BotMail was done under
tinderbox-devel-3.2_4; dsversion: 3.2 on RELENG_7 on amd64, kern.smp.cpus: 4
with tinderd_flags="-nullfs -plistcheck -onceonly" and ccache support, with the
"official" up-to-date Ports Tree, with the following vars set:
NOPORTDOCS=yes,  NOPORTEXAMPLES=yes, NOPORTDATA=yes, FORCE_PACKAGE=yes.

A description of the testing process can be found here:
http://T32.TecNik93.com/FreeBSD/QA-Tindy/


Thanks for your work on making FreeBSD better,

--
QAT - your friendly neighborhood Daemon,
preparing  a heck of an error trapping system:
 - "HMC and EOI?"
 - "Halt, Melt and Catch fire or Execute Operator Immediately."

From nehe at telus.net  Fri May 29 01:30:38 2009
From: nehe at telus.net (Jeff Molofee)
Date: Fri May 29 01:30:45 2009
Subject: FreeBSD Port: x11/xkeyboard-config
Message-ID: <4A1F3852.9050404@telus.net>

make deinstall && make install clean
===>  Deinstalling for x11/xkeyboard-config
===>   Deinstalling xkeyboard-config-1.5_1
pkg_delete: package 'xkeyboard-config-1.5_1' is required by these other 
packages
and may not be deinstalled (but I'll delete it anyway):
xf86-input-keyboard-1.3.2_2
xf86-input-mouse-1.4.0_6
xf86-video-nv-2.1.13_1
xf86-video-openchrome-0.2.903_2
xf86-video-vesa-2.1.0_2
xorg-7.4_2
xorg-drivers-7.4_2
xorg-server-1.6.1,1

*===>  Patching for xkeyboard-config-1.6
===>   xkeyboard-config-1.6 depends on file: /usr/local/bin/perl5.10.0 - 
found
===>  Applying FreeBSD patches for xkeyboard-config-1.6
Ignoring previously applied (or reversed) patch.
1 out of 1 hunks ignored--saving rejects to configure.rej
=> Patch patch-configure failed to apply cleanly.
*** Error code 1
*

From QAT at FreeBSD.org  Fri May 29 01:35:50 2009
From: QAT at FreeBSD.org (QAT@FreeBSD.org)
Date: Fri May 29 01:36:19 2009
Subject: cvs commit: ports/x11/xkeyboard-config Makefile distinfo
	pkg-plist
In-Reply-To: <200905282220.n4SMKMFH014864@repoman.freebsd.org>
References: <200905282220.n4SMKMFH014864@repoman.freebsd.org>
Message-ID: <20090529013538.248D43984D@qat.tcbug.org>

The Restless Daemon identified a mtree error while trying to build:
 xkeyboard-config-1.6 maintained by x11@FreeBSD.org
 Makefile ident: $FreeBSD: ports/x11/xkeyboard-config/Makefile,v 1.15 2009/05/28 22:20:22 rnoland Exp $

Excerpt from http://QAT.TecNik93.com/logs/7-STABLE-FPT-NPD/xkeyboard-config-1.6.log :

 install  -o root -g wheel -m 444 'pc' '/usr/local/share/X11/xkb/types/pc'
 install  -o root -g wheel -m 444 'README' '/usr/local/share/X11/xkb/types/README'
gmake[2]: Leaving directory `/work/a/ports/x11/xkeyboard-config/work/xkeyboard-config-1.6/types'
gmake[1]: Leaving directory `/work/a/ports/x11/xkeyboard-config/work/xkeyboard-config-1.6/types'
Making install in docs
gmake[1]: Entering directory `/work/a/ports/x11/xkeyboard-config/work/xkeyboard-config-1.6/docs'
gmake[2]: Entering directory `/work/a/ports/x11/xkeyboard-config/work/xkeyboard-config-1.6/docs'
gmake[2]: Nothing to be done for `install-exec-am'.
gmake[2]: Nothing to be done for `install-data-am'.
gmake[2]: Leaving directory `/work/a/ports/x11/xkeyboard-config/work/xkeyboard-config-1.6/docs'
gmake[1]: Leaving directory `/work/a/ports/x11/xkeyboard-config/work/xkeyboard-config-1.6/docs'
gmake[1]: Entering directory `/work/a/ports/x11/xkeyboard-config/work/xkeyboard-config-1.6'
gmake[2]: Entering directory `/work/a/ports/x11/xkeyboard-config/work/xkeyboard-config-1.6'
gmake[2]: Nothing to be done for `install-exec-am'.
gmake  install-data-hook
gmake[3]: Entering directory `/work/a/ports/x11/xkeyboard-config/work/xkeyboard-config-1.6'
ln -sf /usr/local/bin/xkbcomp /usr/local/share/X11/xkb/xkbcomp
gmake[3]: Leaving directory `/work/a/ports/x11/xkeyboard-config/work/xkeyboard-config-1.6'
gmake[2]: Leaving directory `/work/a/ports/x11/xkeyboard-config/work/xkeyboard-config-1.6'
gmake[1]: Leaving directory `/work/a/ports/x11/xkeyboard-config/work/xkeyboard-config-1.6'
/bin/mkdir -p /var/lib/xkb
/bin/ln -sf /var/lib/xkb /usr/local/share/X11/xkb/compiled
===>   Registering installation for xkeyboard-config-1.6
================================================================
====================<phase 7: make package>====================
===>  Building package for xkeyboard-config-1.6
Creating package /tmp/packages/All/xkeyboard-config-1.6.tbz
Registering depends: gettext-0.17_1 libiconv-1.11_1.
Creating bzip'd tar ball in '/tmp/packages/All/xkeyboard-config-1.6.tbz'
Deleting xkeyboard-config-1.6
================================================================

=== Checking filesystem state
list of extra files and directories in / (not present before this port was installed but present after it was deinstalled)
779278        4 drwxr-xr-x    3 root             wheel                 512 May 29 01:35 usr/local/share/locale/crh
779279        4 drwxr-xr-x    2 root             wheel                 512 May 29 01:35 usr/local/share/locale/crh/LC_MESSAGES
779284        4 drwxr-xr-x    3 root             wheel                 512 May 29 01:35 usr/local/share/locale/ky
779285        4 drwxr-xr-x    2 root             wheel                 512 May 29 01:35 usr/local/share/locale/ky/LC_MESSAGES
================================================================
build of /usr/ports/x11/xkeyboard-config ended at Fri May 29 01:35:36 UTC 2009

The tarballed WRKDIR can be found here:
http://QAT.TecNik93.com/wrkdirs/7-STABLE-FPT-NPD/xkeyboard-config-1.6.tbz

PortsMon page for the port:
http://portsmon.freebsd.org/portoverview.py?category=x11&portname=xkeyboard-config

The build which triggered this BotMail was done under
tinderbox-devel-3.2_4; dsversion: 3.2 on RELENG_7 on amd64, kern.smp.cpus: 4
with tinderd_flags="-nullfs -plistcheck -onceonly" and ccache support, with the
"official" up-to-date Ports Tree, with the following vars set:
NOPORTDOCS=yes,  NOPORTEXAMPLES=yes, NOPORTDATA=yes, FORCE_PACKAGE=yes.

A description of the testing process can be found here:
http://T32.TecNik93.com/FreeBSD/QA-Tindy/


Thanks for your work on making FreeBSD better,

--
QAT - your friendly neighborhood Daemon,
preparing  a heck of an error trapping system:
 - "HMC and EOI?"
 - "Halt, Melt and Catch fire or Execute Operator Immediately."

From onemda at gmail.com  Fri May 29 11:21:01 2009
From: onemda at gmail.com (Paul B. Mahol)
Date: Fri May 29 11:21:08 2009
Subject: FreeBSD Port: x11/xkeyboard-config
In-Reply-To: <4A1F3852.9050404@telus.net>
References: <4A1F3852.9050404@telus.net>
Message-ID: <3a142e750905290420n1ee4b8d5ved9717df1c824e71@mail.gmail.com>

On 5/29/09, Jeff Molofee <nehe@telus.net> wrote:
> make deinstall && make install clean
> ===>  Deinstalling for x11/xkeyboard-config
> ===>   Deinstalling xkeyboard-config-1.5_1
> pkg_delete: package 'xkeyboard-config-1.5_1' is required by these other
> packages
> and may not be deinstalled (but I'll delete it anyway):
> xf86-input-keyboard-1.3.2_2
> xf86-input-mouse-1.4.0_6
> xf86-video-nv-2.1.13_1
> xf86-video-openchrome-0.2.903_2
> xf86-video-vesa-2.1.0_2
> xorg-7.4_2
> xorg-drivers-7.4_2
> xorg-server-1.6.1,1
>
> *===>  Patching for xkeyboard-config-1.6
> ===>   xkeyboard-config-1.6 depends on file: /usr/local/bin/perl5.10.0 -
> found
> ===>  Applying FreeBSD patches for xkeyboard-config-1.6
> Ignoring previously applied (or reversed) patch.
> 1 out of 1 hunks ignored--saving rejects to configure.rej
> => Patch patch-configure failed to apply cleanly.
> *** Error code 1
> *
>
> _______________________________________________
> freebsd-x11@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-x11
> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org"
>

Is this just me or new port just broke X11 zaping?

-- 
Paul
From tevans.uk at googlemail.com  Fri May 29 11:30:56 2009
From: tevans.uk at goog