From aragon at phat.za.net Wed Jul 1 09:56:18 2009 From: aragon at phat.za.net (Aragon Gouveia) Date: Wed Jul 1 09:57:50 2009 Subject: Some issues with video-intel-2.7.1 In-Reply-To: <4A4B301F.4050700@phat.za.net> References: <4A4B301F.4050700@phat.za.net> Message-ID: <4A4B3089.5090706@phat.za.net> My apologies - I forgot to attach the log files. They're attached here. Aragon Gouveia wrote: > Hi, > > I recently installed a new system from the 200906 8.0 snapshot ISO. I'm > having a couple of issues when running latest Xorg/Xserver/video-intel > from ports: > > * The only way to restart X without killing the vtys is by using > ctrl+alt+backspace. If my window manager exits normally, when Xorg > restarts it leaves the vtys with horizontal stripey garbage on the > screen. Switching to/from Xorg/vtys using ctrl+alt shortcuts works fine > though. > > * Xorg only runs reliably if used straight after a fresh boot of the > system. After Xorg is restarted everything just starts > pausing/stuttering at random, even the xdm login screen. > > For the second point, I've attached two Xorg.log files. The first is > the log file straight after a fresh boot, and the second a log file > after a Xorg restart. The interesting bit is if they're diffed. > > My Xorg gets spawned by xdm which gets spawned by init. My package > versions: > > xorg-server-1.6.1,1 > xf86-video-intel-2.7.1 > mesa 7.4.4 (libGL, libGLU, dri) > > Something else of interest is that my kernel logs this on Xorg restarts: > > kernel: error: [drm:pid1619:i915_get_vblank_counter] *ERROR* > trying to get vblank count for disabled pipe 0 > > > Thanks, > Aragon > > -------------- next part -------------- X.Org X Server 1.6.1 Release Date: 2009-4-14 X Protocol Version 11, Revision 0 Build Operating System: FreeBSD 8.0-CURRENT-200906 amd64 Current Operating System: FreeBSD fuzz.geek.sh 8.0-CURRENT-200906 FreeBSD 8.0-CURRENT-200906 #0: Sun Jun 7 10:31:30 UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 Build Date: 27 June 2009 05:27:44AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 1 11:24:52 2009 (==) Using config file: "/etc/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) Option "DontZap" "off" (**) Option "AIGLX" "on" (**) Option "AllowEmptyInput" "off" (**) Option "AutoAddDevices" "off" (**) Option "AutoEnableDevices" "off" (**) Not automatically adding devices (**) Not automatically enabling devices (**) FontPath set to: /usr/local/lib/X11/fonts/Type1, /usr/local/lib/X11/fonts/urwfonts-ttf, /usr/local/lib/X11/fonts/freefont, /usr/local/lib/X11/fonts/freefont-ttf, /usr/local/lib/X11/fonts/webfonts, /usr/local/lib/X11/fonts/artwiz-aleczapka-en, /usr/local/lib/X11/fonts/misc, /usr/local/lib/X11/fonts/cyrillic, /usr/local/lib/X11/fonts/100dpi, /usr/local/lib/X11/fonts/75dpi, /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/, built-ins (**) ModulePath set to "/usr/local/lib/xorg/modules" (**) Extension "Composite" is enabled (II) Loader magic: 0x1b20 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on freebsd (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf6e00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff0/8, BIOS @ 0x????????/65536 (--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf6f00000/1048576 (II) System resource ranges: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded by default. (II) "dri2" will be loaded by default. (II) LoadModule: "extmod" (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (**) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "int10" (II) Loading /usr/local/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "dbe" (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.1, module version = 2.7.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "kbd" (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) LoadModule: "mouse" (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.4.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel?? GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) resource ranges after probing: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/local/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (**) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (**) intel(0): Option "XvMC" "on" (**) intel(0): Option "XvPreferOverlay" "on" (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM (--) intel(0): Chipset: "965GM" (--) intel(0): Linear framebuffer at 0xE0000000 (--) intel(0): IO registers at addr 0xF6E00000 (==) intel(0): Using EXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Monitor0 (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): EDID vendor "LCD", prod id 8966 (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. (II) intel(0): Output TMDS-1 has no monitor section (II) intel(0): SDVOB: device VID/DID: 04:AE.00, clock range 25.0MHz - 165.0MHz (II) intel(0): SDVOB: 1 input channel (II) intel(0): SDVOB: TMDS0 output reported (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): Current clock rate multiplier: 1 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): Resizable framebuffer: not available (1 3) (II) intel(0): EDID vendor "LCD", prod id 8966 (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Output TMDS-1 disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS using initial mode 1280x800 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 7676 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (**) intel(0): Display dimensions: (286, 179) mm (**) intel(0): DPI set to (113, 181) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/local/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/local/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.6.1, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009 (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 491520 total, 0 used (II) intel(0): I830CheckAvailableMemory: 1966080 kB available (WW) intel(0): DRI2 requires UXA drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] DRM interface version 1.2 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): [drm] Registers = 0xf6e00000 (II) intel(0): [drm] ring buffer = 0xe0000000 (II) intel(0): [drm] mapped front buffer at 0xe082b000, handle = 0xe082b000 (II) intel(0): [drm] mapped back buffer at 0xe212c000, handle = 0xe212c000 (II) intel(0): [drm] mapped depth buffer at 0xe276c000, handle = 0xe276c000 (II) intel(0): [drm] mapped classic textures at 0xe2dac000, handle = 0xe2dac000 (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432 (II) intel(0): [dri] visual configs initialized (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) EXA(0): Offscreen pixmap area of 19660800 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (WW) intel(0): drmDropMaster failed: Unknown error: -1 (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0077f000 (pgoffset 1919) (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x0082a000 (pgoffset 2090) (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x0082b000 (pgoffset 2091) (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x00e6b000 (pgoffset 3691) (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x0212b000 (pgoffset 8491) (II) intel(0): xf86BindGARTMemory: bind key 6 at 0x0212c000 (pgoffset 8492) (II) intel(0): xf86BindGARTMemory: bind key 7 at 0x0276c000 (pgoffset 10092) (II) intel(0): xf86BindGARTMemory: bind key 8 at 0x02dac000 (pgoffset 11692) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB) (II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB) (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x0082a000-0x0082afff: overlay registers (4 kB) (II) intel(0): 0x0082b000-0x00e6afff: front buffer (6400 kB) X tiled (II) intel(0): 0x00e6b000-0x0212afff: exa offscreen (19200 kB) (II) intel(0): 0x0212b000-0x0212bfff: power context (4 kB) (II) intel(0): 0x0212c000-0x0276bfff: back buffer (6400 kB) X tiled (II) intel(0): 0x0276c000-0x02dabfff: depth buffer (6400 kB) Y tiled (II) intel(0): 0x02dac000-0x04dabfff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): using SSC reference clock of 96 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TMDS-1 is connected to pipe none (II) intel(0): [drm] dma control initialized, using IRQ 256 (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (**) Option "dpms" "on" (**) intel(0): DPMS enabled (**) intel(0): Intel XvMC decoder enabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): xf86BindGARTMemory: bind key 9 at 0x04dac000 (pgoffset 19884) (II) intel(0): [XvMC] i965_xvmc driver initialized. (II) intel(0): direct rendering: XF86DRI Enabled (WW) intel(0): Option "XvMCSurfaces" is not used (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: enabled GLX_texture_from_pixmap with driver support (II) AIGLX: Loaded and initialized /usr/local/lib/dri/i965_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) intel(0): Setting screen physical size to 287 x 180 (**) Option "CoreKeyboard" (**) Keyboard0: always reports core events (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "250 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc104" (**) Keyboard0: XkbModel: "pc104" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "XkbOptions" "compose:ralt,terminate:ctrl_alt_bksp" (**) Keyboard0: XkbOptions: "compose:ralt,terminate:ctrl_alt_bksp" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (**) Option "Protocol" "auto" (**) Mouse0: Device: "/dev/sysmouse" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: always reports core events (**) Option "Device" "/dev/sysmouse" (**) Option "Emulate3Buttons" "false" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 9 (**) Mouse0: Sensitivity: 1 (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (**) Mouse0: (accel) keeping acceleration scheme 1 (**) Mouse0: (accel) filter chain progression: 2.00 (**) Mouse0: (accel) filter stage 0: 20.00 ms (**) Mouse0: (accel) set acceleration profile 0 (II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0 (II) Mouse0: SetupAuto: protocol is SysMouse (II) intel(0): EDID vendor "LCD", prod id 8966 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 72.10 1280 1296 1344 1448 800 802 804 830 -hsync -vsync (49.8 kHz) (II) intel(0): EDID vendor "LCD", prod id 8966 -------------- next part -------------- X.Org X Server 1.6.1 Release Date: 2009-4-14 X Protocol Version 11, Revision 0 Build Operating System: FreeBSD 8.0-CURRENT-200906 amd64 Current Operating System: FreeBSD fuzz.geek.sh 8.0-CURRENT-200906 FreeBSD 8.0-CURRENT-200906 #0: Sun Jun 7 10:31:30 UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 Build Date: 27 June 2009 05:27:44AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 1 11:25:21 2009 (==) Using config file: "/etc/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) Option "DontZap" "off" (**) Option "AIGLX" "on" (**) Option "AllowEmptyInput" "off" (**) Option "AutoAddDevices" "off" (**) Option "AutoEnableDevices" "off" (**) Not automatically adding devices (**) Not automatically enabling devices (**) FontPath set to: /usr/local/lib/X11/fonts/Type1, /usr/local/lib/X11/fonts/urwfonts-ttf, /usr/local/lib/X11/fonts/freefont, /usr/local/lib/X11/fonts/freefont-ttf, /usr/local/lib/X11/fonts/webfonts, /usr/local/lib/X11/fonts/artwiz-aleczapka-en, /usr/local/lib/X11/fonts/misc, /usr/local/lib/X11/fonts/cyrillic, /usr/local/lib/X11/fonts/100dpi, /usr/local/lib/X11/fonts/75dpi, /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/, built-ins (**) ModulePath set to "/usr/local/lib/xorg/modules" (**) Extension "Composite" is enabled (II) Loader magic: 0x1b20 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on freebsd (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf6e00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff0/8, BIOS @ 0x????????/65536 (--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf6f00000/1048576 (II) System resource ranges: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded by default. (II) "dri2" will be loaded by default. (II) LoadModule: "extmod" (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (**) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "int10" (II) Loading /usr/local/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "dbe" (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "record" (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.1, module version = 2.7.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) LoadModule: "kbd" (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) LoadModule: "mouse" (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.4.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel?? GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) resource ranges after probing: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/local/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (**) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (**) intel(0): Option "XvMC" "on" (**) intel(0): Option "XvPreferOverlay" "on" (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM (--) intel(0): Chipset: "965GM" (--) intel(0): Linear framebuffer at 0xE0000000 (--) intel(0): IO registers at addr 0xF6E00000 (==) intel(0): Using EXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Monitor0 (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): EDID vendor "LCD", prod id 8966 (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. (II) intel(0): Output TMDS-1 has no monitor section (II) intel(0): SDVOB: device VID/DID: 04:AE.00, clock range 25.0MHz - 165.0MHz (II) intel(0): SDVOB: 1 input channel (II) intel(0): SDVOB: TMDS0 output reported (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): Current clock rate multiplier: 1 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): Resizable framebuffer: not available (1 3) (II) intel(0): EDID vendor "LCD", prod id 8966 (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Output TMDS-1 disconnected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS using initial mode 1280x800 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): detected 512 kB GTT. (II) intel(0): detected 7676 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (**) intel(0): Display dimensions: (286, 179) mm (**) intel(0): DPI set to (113, 181) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/local/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/local/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.6.1, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): Comparing regs from server start up to After PreInit (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 491520 total, 0 used (II) intel(0): I830CheckAvailableMemory: 1966080 kB available (WW) intel(0): DRI2 requires UXA drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] DRM interface version 1.2 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): [drm] Registers = 0xf6e00000 (II) intel(0): [drm] ring buffer = 0xe0000000 (II) intel(0): [drm] mapped front buffer at 0xe082b000, handle = 0xe082b000 (II) intel(0): [drm] mapped back buffer at 0xe212c000, handle = 0xe212c000 (II) intel(0): [drm] mapped depth buffer at 0xe276c000, handle = 0xe276c000 (II) intel(0): [drm] mapped classic textures at 0xe2dac000, handle = 0xe2dac000 (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432 (II) intel(0): [dri] visual configs initialized (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) EXA(0): Offscreen pixmap area of 19660800 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (WW) intel(0): drmDropMaster failed: Unknown error: -1 (II) intel(0): Current clock rate multiplier: 1 (II) intel(0): xf86BindGARTMemory: bind key 10 at 0x0077f000 (pgoffset 1919) (II) intel(0): xf86BindGARTMemory: bind key 11 at 0x0082a000 (pgoffset 2090) (II) intel(0): xf86BindGARTMemory: bind key 12 at 0x0082b000 (pgoffset 2091) (II) intel(0): xf86BindGARTMemory: bind key 13 at 0x00e6b000 (pgoffset 3691) (II) intel(0): xf86BindGARTMemory: bind key 14 at 0x0212b000 (pgoffset 8491) (II) intel(0): xf86BindGARTMemory: bind key 15 at 0x0212c000 (pgoffset 8492) (II) intel(0): xf86BindGARTMemory: bind key 16 at 0x0276c000 (pgoffset 10092) (II) intel(0): xf86BindGARTMemory: bind key 17 at 0x02dac000 (pgoffset 11692) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB) (II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB) (II) intel(0): 0x0077f000: end of stolen memory (II) intel(0): 0x0082a000-0x0082afff: overlay registers (4 kB) (II) intel(0): 0x0082b000-0x00e6afff: front buffer (6400 kB) X tiled (II) intel(0): 0x00e6b000-0x0212afff: exa offscreen (19200 kB) (II) intel(0): 0x0212b000-0x0212bfff: power context (4 kB) (II) intel(0): 0x0212c000-0x0276bfff: back buffer (6400 kB) X tiled (II) intel(0): 0x0276c000-0x02dabfff: depth buffer (6400 kB) Y tiled (II) intel(0): 0x02dac000-0x04dabfff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (WW) intel(0): ESR is 0x00000001 (WW) intel(0): Existing errors found in hardware state. (II) intel(0): using SSC reference clock of 96 MHz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane A is now disabled and connected to pipe A. (II) intel(0): Pipe B is on (II) intel(0): Display plane B is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): Output TMDS-1 is connected to pipe none (II) intel(0): [drm] dma control initialized, using IRQ 256 (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (**) Option "dpms" "on" (**) intel(0): DPMS enabled (**) intel(0): Intel XvMC decoder enabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): xf86BindGARTMemory: bind key 18 at 0x04dac000 (pgoffset 19884) (II) intel(0): [XvMC] i965_xvmc driver initialized. (II) intel(0): direct rendering: XF86DRI Enabled (WW) intel(0): Option "XvMCSurfaces" is not used (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Screen 0 is not DRI2 capable drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 10, (OK) drmOpenByBusid: drmOpenMinor returns 10 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) AIGLX: enabled GLX_SGI_make_current_read (II) AIGLX: enabled GLX_MESA_copy_sub_buffer (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control (II) AIGLX: enabled GLX_texture_from_pixmap with driver support (II) AIGLX: Loaded and initialized /usr/local/lib/dri/i965_dri.so (II) GLX: Initialized DRI GL provider for screen 0 (II) intel(0): Setting screen physical size to 287 x 180 (**) Option "CoreKeyboard" (**) Keyboard0: always reports core events (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "250 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc104" (**) Keyboard0: XkbModel: "pc104" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "XkbOptions" "compose:ralt,terminate:ctrl_alt_bksp" (**) Keyboard0: XkbOptions: "compose:ralt,terminate:ctrl_alt_bksp" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (**) Option "Protocol" "auto" (**) Mouse0: Device: "/dev/sysmouse" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: always reports core events (**) Option "Device" "/dev/sysmouse" (**) Option "Emulate3Buttons" "false" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 9 (**) Mouse0: Sensitivity: 1 (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (**) Mouse0: (accel) keeping acceleration scheme 1 (**) Mouse0: (accel) filter chain progression: 2.00 (**) Mouse0: (accel) filter stage 0: 20.00 ms (**) Mouse0: (accel) set acceleration profile 0 (II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0 (II) Mouse0: SetupAuto: protocol is SysMouse (II) intel(0): EDID vendor "LCD", prod id 8966 (II) intel(0): Using EDID range info for horizontal sync (II) intel(0): Using EDID range info for vertical refresh (II) intel(0): Printing DDC gathered Modelines: (II) intel(0): Modeline "1280x800"x0.0 72.10 1280 1296 1344 1448 800 802 804 830 -hsync -vsync (49.8 kHz) (II) intel(0): EDID vendor "LCD", prod id 8966 From aragon at phat.za.net Wed Jul 1 10:01:17 2009 From: aragon at phat.za.net (Aragon Gouveia) Date: Wed Jul 1 10:01:24 2009 Subject: Some issues with video-intel-2.7.1 Message-ID: <4A4B301F.4050700@phat.za.net> Hi, I recently installed a new system from the 200906 8.0 snapshot ISO. I'm having a couple of issues when running latest Xorg/Xserver/video-intel from ports: * The only way to restart X without killing the vtys is by using ctrl+alt+backspace. If my window manager exits normally, when Xorg restarts it leaves the vtys with horizontal stripey garbage on the screen. Switching to/from Xorg/vtys using ctrl+alt shortcuts works fine though. * Xorg only runs reliably if used straight after a fresh boot of the system. After Xorg is restarted everything just starts pausing/stuttering at random, even the xdm login screen. For the second point, I've attached two Xorg.log files. The first is the log file straight after a fresh boot, and the second a log file after a Xorg restart. The interesting bit is if they're diffed. My Xorg gets spawned by xdm which gets spawned by init. My package versions: xorg-server-1.6.1,1 xf86-video-intel-2.7.1 mesa 7.4.4 (libGL, libGLU, dri) Something else of interest is that my kernel logs this on Xorg restarts: kernel: error: [drm:pid1619:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0 Thanks, Aragon From onemda at gmail.com Wed Jul 1 12:17:50 2009 From: onemda at gmail.com (Paul B. Mahol) Date: Wed Jul 1 12:17:58 2009 Subject: Some issues with video-intel-2.7.1 In-Reply-To: <4A4B301F.4050700@phat.za.net> References: <4A4B301F.4050700@phat.za.net> Message-ID: <3a142e750907010517w56981548h3916fd453a9eb278@mail.gmail.com> On 7/1/09, Aragon Gouveia wrote: > Hi, > > I recently installed a new system from the 200906 8.0 snapshot ISO. I'm > having a couple of issues when running latest Xorg/Xserver/video-intel > from ports: > > * The only way to restart X without killing the vtys is by using > ctrl+alt+backspace. If my window manager exits normally, when Xorg > restarts it leaves the vtys with horizontal stripey garbage on the > screen. Switching to/from Xorg/vtys using ctrl+alt shortcuts works fine > though. > > * Xorg only runs reliably if used straight after a fresh boot of the > system. After Xorg is restarted everything just starts > pausing/stuttering at random, even the xdm login screen. > > For the second point, I've attached two Xorg.log files. The first is > the log file straight after a fresh boot, and the second a log file > after a Xorg restart. The interesting bit is if they're diffed. > > My Xorg gets spawned by xdm which gets spawned by init. My package > versions: > > xorg-server-1.6.1,1 > xf86-video-intel-2.7.1 > mesa 7.4.4 (libGL, libGLU, dri) > > Something else of interest is that my kernel logs this on Xorg restarts: > > kernel: error: [drm:pid1619:i915_get_vblank_counter] *ERROR* > trying to get vblank count for disabled pipe 0 Recently, CURRENT get some more drm changes that address vsync problems. One of them fixed problem with vblank you mentioned above. -- Paul From rnoland at FreeBSD.org Wed Jul 1 13:28:53 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Wed Jul 1 13:29:08 2009 Subject: Some issues with video-intel-2.7.1 In-Reply-To: <4A4B3089.5090706@phat.za.net> References: <4A4B301F.4050700@phat.za.net> <4A4B3089.5090706@phat.za.net> Message-ID: <1246454921.1855.27.camel@balrog.2hip.net> On Wed, 2009-07-01 at 11:46 +0200, Aragon Gouveia wrote: > My apologies - I forgot to attach the log files. They're attached here. -CURRENT should resolve most of your issues. The problem is with our handling of msi interrupts in the pci code. A few people are reporting panics with HEAD that haven't yet been resolved. I let X autoload the kernel modules and I haven't seen any issues with the G45 board that I use for my Intel work. robert. > > > Aragon Gouveia wrote: > > Hi, > > > > I recently installed a new system from the 200906 8.0 snapshot ISO. I'm > > having a couple of issues when running latest Xorg/Xserver/video-intel > > from ports: > > > > * The only way to restart X without killing the vtys is by using > > ctrl+alt+backspace. If my window manager exits normally, when Xorg > > restarts it leaves the vtys with horizontal stripey garbage on the > > screen. Switching to/from Xorg/vtys using ctrl+alt shortcuts works fine > > though. > > > > * Xorg only runs reliably if used straight after a fresh boot of the > > system. After Xorg is restarted everything just starts > > pausing/stuttering at random, even the xdm login screen. > > > > For the second point, I've attached two Xorg.log files. The first is > > the log file straight after a fresh boot, and the second a log file > > after a Xorg restart. The interesting bit is if they're diffed. > > > > My Xorg gets spawned by xdm which gets spawned by init. My package > > versions: > > > > xorg-server-1.6.1,1 > > xf86-video-intel-2.7.1 > > mesa 7.4.4 (libGL, libGLU, dri) > > > > Something else of interest is that my kernel logs this on Xorg restarts: > > > > kernel: error: [drm:pid1619:i915_get_vblank_counter] *ERROR* > > trying to get vblank count for disabled pipe 0 > > > > > > Thanks, > > Aragon > > > > > plain text document attachment (Xorg-1.log) > X.Org X Server 1.6.1 > Release Date: 2009-4-14 > X Protocol Version 11, Revision 0 > Build Operating System: FreeBSD 8.0-CURRENT-200906 amd64 > Current Operating System: FreeBSD fuzz.geek.sh 8.0-CURRENT-200906 FreeBSD 8.0-CURRENT-200906 #0: Sun Jun 7 10:31:30 UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 > Build Date: 27 June 2009 05:27:44AM > > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 1 11:24:52 2009 > (==) Using config file: "/etc/xorg.conf" > (==) ServerLayout "Layout0" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "Videocard0" > (**) |-->Input Device "Keyboard0" > (**) |-->Input Device "Mouse0" > (**) Option "DontZap" "off" > (**) Option "AIGLX" "on" > (**) Option "AllowEmptyInput" "off" > (**) Option "AutoAddDevices" "off" > (**) Option "AutoEnableDevices" "off" > (**) Not automatically adding devices > (**) Not automatically enabling devices > (**) FontPath set to: > /usr/local/lib/X11/fonts/Type1, > /usr/local/lib/X11/fonts/urwfonts-ttf, > /usr/local/lib/X11/fonts/freefont, > /usr/local/lib/X11/fonts/freefont-ttf, > /usr/local/lib/X11/fonts/webfonts, > /usr/local/lib/X11/fonts/artwiz-aleczapka-en, > /usr/local/lib/X11/fonts/misc, > /usr/local/lib/X11/fonts/cyrillic, > /usr/local/lib/X11/fonts/100dpi, > /usr/local/lib/X11/fonts/75dpi, > /usr/local/lib/X11/fonts/misc/, > /usr/local/lib/X11/fonts/TTF/, > /usr/local/lib/X11/fonts/OTF, > /usr/local/lib/X11/fonts/Type1/, > /usr/local/lib/X11/fonts/100dpi/, > /usr/local/lib/X11/fonts/75dpi/, > built-ins > (**) ModulePath set to "/usr/local/lib/xorg/modules" > (**) Extension "Composite" is enabled > (II) Loader magic: 0x1b20 > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.4 > X.Org Video Driver: 5.0 > X.Org XInput driver : 4.0 > X.Org Server Extension : 2.0 > (II) Loader running on freebsd > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 9 > > (--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf6e00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff0/8, BIOS @ 0x????????/65536 > (--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf6f00000/1048576 > (II) System resource ranges: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. > (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. > (II) "glx" will be loaded. This was enabled by default and also specified in the config file. > (II) "record" will be loaded. This was enabled by default and also specified in the config file. > (II) "dri" will be loaded by default. > (II) "dri2" will be loaded by default. > (II) LoadModule: "extmod" > (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so > (II) Module extmod: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "glx" > (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so > (II) Module glx: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (**) AIGLX enabled > (II) Loading extension GLX > (II) LoadModule: "int10" > (II) Loading /usr/local/lib/xorg/modules//libint10.so > (II) Module int10: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.0.0 > ABI class: X.Org Video Driver, version 5.0 > (II) LoadModule: "dbe" > (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so > (II) Module dbe: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "record" > (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so > (II) Module record: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.13.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension RECORD > (II) LoadModule: "dri" > (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so > (II) Module dri: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension XFree86-DRI > (II) LoadModule: "dri2" > (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so > (II) Module dri2: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DRI2 > (II) LoadModule: "intel" > (II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so > (II) Module intel: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 2.7.1 > Module class: X.Org Video Driver > ABI class: X.Org Video Driver, version 5.0 > (II) LoadModule: "kbd" > (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so > (II) Module kbd: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.3.2 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 4.0 > (II) LoadModule: "mouse" > (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so > (II) Module mouse: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.4.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 4.0 > (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, > i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, > E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, > 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, > Mobile Intel GM45 Express Chipset, > Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 > (II) Primary Device is: PCI 00@00:02:0 > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) resource ranges after probing: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/local/lib/xorg/modules//libvgahw.so > (II) Module vgahw: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 0.1.0 > ABI class: X.Org Video Driver, version 5.0 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Module "ramdac" already built-in > (**) intel(0): Depth 24, (--) framebuffer bpp 32 > (==) intel(0): RGB weight 888 > (==) intel(0): Default visual is TrueColor > (**) intel(0): Option "XvMC" "on" > (**) intel(0): Option "XvPreferOverlay" "on" > (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM > (--) intel(0): Chipset: "965GM" > (--) intel(0): Linear framebuffer at 0xE0000000 > (--) intel(0): IO registers at addr 0xF6E00000 > (==) intel(0): Using EXA for acceleration > (II) intel(0): 2 display pipes available. > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Module "ddc" already built-in > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Module "i2c" already built-in > (II) intel(0): Output VGA using monitor section Monitor0 > (II) intel(0): Output LVDS has no monitor section > (II) intel(0): I2C bus "LVDSDDC_C" initialized. > (II) intel(0): Attempting to determine panel fixed mode. > (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60. > (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. > (II) intel(0): EDID vendor "LCD", prod id 8966 > (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. > (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. > (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. > (II) intel(0): Output TMDS-1 has no monitor section > (II) intel(0): SDVOB: device VID/DID: 04:AE.00, clock range 25.0MHz - 165.0MHz > (II) intel(0): SDVOB: 1 input channel > (II) intel(0): SDVOB: TMDS0 output reported > (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. > (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. > (II) intel(0): No SDVO device found on SDVOC > (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. > (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. > (II) intel(0): Current clock rate multiplier: 1 > (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear > (II) intel(0): Resizable framebuffer: not available (1 3) > (II) intel(0): EDID vendor "LCD", prod id 8966 > (II) intel(0): Output VGA disconnected > (II) intel(0): Output LVDS connected > (II) intel(0): Output TMDS-1 disconnected > (II) intel(0): Using exact sizes for initial modes > (II) intel(0): Output LVDS using initial mode 1280x800 > (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear > (II) intel(0): detected 512 kB GTT. > (II) intel(0): detected 7676 kB stolen memory. > (==) intel(0): video overlay key set to 0x101fe > (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) > (**) intel(0): Display dimensions: (286, 179) mm > (**) intel(0): DPI set to (113, 181) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/local/lib/xorg/modules//libfb.so > (II) Module fb: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.0.0 > ABI class: X.Org ANSI C Emulation, version 0.4 > (II) Loading sub module "exa" > (II) LoadModule: "exa" > (II) Loading /usr/local/lib/xorg/modules//libexa.so > (II) Module exa: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 2.4.0 > ABI class: X.Org Video Driver, version 5.0 > (II) intel(0): Comparing regs from server start up to After PreInit > (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009 > (WW) intel(0): PP_STATUS before: on, ready, sequencing idle > (WW) intel(0): PP_STATUS after: on, ready, sequencing on > (==) Depth 24 pixmap format is 32 bpp > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) > [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) > [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) > [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) > [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) > (II) intel(0): Kernel reported 491520 total, 0 used > (II) intel(0): I830CheckAvailableMemory: 1966080 kB available > (WW) intel(0): DRI2 requires UXA > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 9, (OK) > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 9, (OK) > drmOpenByBusid: Searching for BusID pci:0000:00:02.0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 9, (OK) > drmOpenByBusid: drmOpenMinor returns 9 > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 > (II) [drm] DRM interface version 1.2 > (II) [drm] DRM open master succeeded. > (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. > (II) intel(0): [drm] framebuffer mapped by ddx driver > (II) intel(0): [drm] added 1 reserved context for kernel > (II) intel(0): X context handle = 0x1 > (II) intel(0): [drm] installed DRM signal handler > (**) intel(0): Framebuffer compression disabled > (**) intel(0): Tiling enabled > (==) intel(0): VideoRam: 262144 KB > (II) intel(0): Attempting memory allocation with tiled buffers. > (II) intel(0): Tiled allocation successful. > (II) intel(0): [drm] Registers = 0xf6e00000 > (II) intel(0): [drm] ring buffer = 0xe0000000 > (II) intel(0): [drm] mapped front buffer at 0xe082b000, handle = 0xe082b000 > (II) intel(0): [drm] mapped back buffer at 0xe212c000, handle = 0xe212c000 > (II) intel(0): [drm] mapped depth buffer at 0xe276c000, handle = 0xe276c000 > (II) intel(0): [drm] mapped classic textures at 0xe2dac000, handle = 0xe2dac000 > (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432 > (II) intel(0): [dri] visual configs initialized > (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear > (II) EXA(0): Offscreen pixmap area of 19660800 bytes > (II) EXA(0): Driver registered support for the following operations: > (II) Solid > (II) Copy > (II) Composite (RENDER acceleration) > (==) intel(0): Backing store disabled > (==) intel(0): Silken mouse enabled > (II) intel(0): Initializing HW Cursor > (II) intel(0): [DRI] installation complete > (WW) intel(0): drmDropMaster failed: Unknown error: -1 > (II) intel(0): Current clock rate multiplier: 1 > (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0077f000 (pgoffset 1919) > (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x0082a000 (pgoffset 2090) > (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x0082b000 (pgoffset 2091) > (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x00e6b000 (pgoffset 3691) > (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x0212b000 (pgoffset 8491) > (II) intel(0): xf86BindGARTMemory: bind key 6 at 0x0212c000 (pgoffset 8492) > (II) intel(0): xf86BindGARTMemory: bind key 7 at 0x0276c000 (pgoffset 10092) > (II) intel(0): xf86BindGARTMemory: bind key 8 at 0x02dac000 (pgoffset 11692) > (II) intel(0): Fixed memory allocation layout: > (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) > (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB) > (II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB) > (II) intel(0): 0x0077f000: end of stolen memory > (II) intel(0): 0x0082a000-0x0082afff: overlay registers (4 kB) > (II) intel(0): 0x0082b000-0x00e6afff: front buffer (6400 kB) X tiled > (II) intel(0): 0x00e6b000-0x0212afff: exa offscreen (19200 kB) > (II) intel(0): 0x0212b000-0x0212bfff: power context (4 kB) > (II) intel(0): 0x0212c000-0x0276bfff: back buffer (6400 kB) X tiled > (II) intel(0): 0x0276c000-0x02dabfff: depth buffer (6400 kB) Y tiled > (II) intel(0): 0x02dac000-0x04dabfff: classic textures (32768 kB) > (II) intel(0): 0x10000000: end of aperture > (II) intel(0): using SSC reference clock of 96 MHz > (II) intel(0): Selecting standard 18 bit TMDS pixel format. > (II) intel(0): Output configuration: > (II) intel(0): Pipe A is off > (II) intel(0): Display plane A is now disabled and connected to pipe A. > (II) intel(0): Pipe B is on > (II) intel(0): Display plane B is now enabled and connected to pipe B. > (II) intel(0): Output VGA is connected to pipe none > (II) intel(0): Output LVDS is connected to pipe B > (II) intel(0): Output TMDS-1 is connected to pipe none > (II) intel(0): [drm] dma control initialized, using IRQ 256 > (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. > (**) Option "dpms" "on" > (**) intel(0): DPMS enabled > (**) intel(0): Intel XvMC decoder enabled > (II) intel(0): Set up textured video > (II) intel(0): Set up overlay video > (II) intel(0): xf86BindGARTMemory: bind key 9 at 0x04dac000 (pgoffset 19884) > (II) intel(0): [XvMC] i965_xvmc driver initialized. > (II) intel(0): direct rendering: XF86DRI Enabled > (WW) intel(0): Option "XvMCSurfaces" is not used > (--) RandR disabled > (II) Initializing built-in extension Generic Event Extension > (II) Initializing built-in extension SHAPE > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension BIG-REQUESTS > (II) Initializing built-in extension SYNC > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension XC-MISC > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFIXES > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (II) Initializing built-in extension COMPOSITE > (II) Initializing built-in extension DAMAGE > (II) AIGLX: Screen 0 is not DRI2 capable > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 10, (OK) > drmOpenByBusid: Searching for BusID pci:0000:00:02.0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 10, (OK) > drmOpenByBusid: drmOpenMinor returns 10 > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 > (II) AIGLX: enabled GLX_SGI_make_current_read > (II) AIGLX: enabled GLX_MESA_copy_sub_buffer > (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control > (II) AIGLX: enabled GLX_texture_from_pixmap with driver support > (II) AIGLX: Loaded and initialized /usr/local/lib/dri/i965_dri.so > (II) GLX: Initialized DRI GL provider for screen 0 > (II) intel(0): Setting screen physical size to 287 x 180 > (**) Option "CoreKeyboard" > (**) Keyboard0: always reports core events > (**) Option "Protocol" "standard" > (**) Keyboard0: Protocol: standard > (**) Option "AutoRepeat" "250 30" > (**) Option "XkbRules" "xorg" > (**) Keyboard0: XkbRules: "xorg" > (**) Option "XkbModel" "pc104" > (**) Keyboard0: XkbModel: "pc104" > (**) Option "XkbLayout" "us" > (**) Keyboard0: XkbLayout: "us" > (**) Option "XkbOptions" "compose:ralt,terminate:ctrl_alt_bksp" > (**) Keyboard0: XkbOptions: "compose:ralt,terminate:ctrl_alt_bksp" > (**) Option "CustomKeycodes" "off" > (**) Keyboard0: CustomKeycodes disabled > (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) > (**) Option "Protocol" "auto" > (**) Mouse0: Device: "/dev/sysmouse" > (**) Mouse0: Protocol: "auto" > (**) Option "CorePointer" > (**) Mouse0: always reports core events > (**) Option "Device" "/dev/sysmouse" > (**) Option "Emulate3Buttons" "false" > (**) Mouse0: ZAxisMapping: buttons 4 and 5 > (**) Mouse0: Buttons: 9 > (**) Mouse0: Sensitivity: 1 > (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) > (**) Mouse0: (accel) keeping acceleration scheme 1 > (**) Mouse0: (accel) filter chain progression: 2.00 > (**) Mouse0: (accel) filter stage 0: 20.00 ms > (**) Mouse0: (accel) set acceleration profile 0 > (II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0 > (II) Mouse0: SetupAuto: protocol is SysMouse > (II) intel(0): EDID vendor "LCD", prod id 8966 > (II) intel(0): Using EDID range info for horizontal sync > (II) intel(0): Using EDID range info for vertical refresh > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "1280x800"x0.0 72.10 1280 1296 1344 1448 800 802 804 830 -hsync -vsync (49.8 kHz) > (II) intel(0): EDID vendor "LCD", prod id 8966 > plain text document attachment (Xorg-2.log) > X.Org X Server 1.6.1 > Release Date: 2009-4-14 > X Protocol Version 11, Revision 0 > Build Operating System: FreeBSD 8.0-CURRENT-200906 amd64 > Current Operating System: FreeBSD fuzz.geek.sh 8.0-CURRENT-200906 FreeBSD 8.0-CURRENT-200906 #0: Sun Jun 7 10:31:30 UTC 2009 root@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64 > Build Date: 27 June 2009 05:27:44AM > > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 1 11:25:21 2009 > (==) Using config file: "/etc/xorg.conf" > (==) ServerLayout "Layout0" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "Videocard0" > (**) |-->Input Device "Keyboard0" > (**) |-->Input Device "Mouse0" > (**) Option "DontZap" "off" > (**) Option "AIGLX" "on" > (**) Option "AllowEmptyInput" "off" > (**) Option "AutoAddDevices" "off" > (**) Option "AutoEnableDevices" "off" > (**) Not automatically adding devices > (**) Not automatically enabling devices > (**) FontPath set to: > /usr/local/lib/X11/fonts/Type1, > /usr/local/lib/X11/fonts/urwfonts-ttf, > /usr/local/lib/X11/fonts/freefont, > /usr/local/lib/X11/fonts/freefont-ttf, > /usr/local/lib/X11/fonts/webfonts, > /usr/local/lib/X11/fonts/artwiz-aleczapka-en, > /usr/local/lib/X11/fonts/misc, > /usr/local/lib/X11/fonts/cyrillic, > /usr/local/lib/X11/fonts/100dpi, > /usr/local/lib/X11/fonts/75dpi, > /usr/local/lib/X11/fonts/misc/, > /usr/local/lib/X11/fonts/TTF/, > /usr/local/lib/X11/fonts/OTF, > /usr/local/lib/X11/fonts/Type1/, > /usr/local/lib/X11/fonts/100dpi/, > /usr/local/lib/X11/fonts/75dpi/, > built-ins > (**) ModulePath set to "/usr/local/lib/xorg/modules" > (**) Extension "Composite" is enabled > (II) Loader magic: 0x1b20 > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.4 > X.Org Video Driver: 5.0 > X.Org XInput driver : 4.0 > X.Org Server Extension : 2.0 > (II) Loader running on freebsd > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 9 > > (--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf6e00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff0/8, BIOS @ 0x????????/65536 > (--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xf6f00000/1048576 > (II) System resource ranges: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. > (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. > (II) "glx" will be loaded. This was enabled by default and also specified in the config file. > (II) "record" will be loaded. This was enabled by default and also specified in the config file. > (II) "dri" will be loaded by default. > (II) "dri2" will be loaded by default. > (II) LoadModule: "extmod" > (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so > (II) Module extmod: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "glx" > (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so > (II) Module glx: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (**) AIGLX enabled > (II) Loading extension GLX > (II) LoadModule: "int10" > (II) Loading /usr/local/lib/xorg/modules//libint10.so > (II) Module int10: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.0.0 > ABI class: X.Org Video Driver, version 5.0 > (II) LoadModule: "dbe" > (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so > (II) Module dbe: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "record" > (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so > (II) Module record: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.13.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension RECORD > (II) LoadModule: "dri" > (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so > (II) Module dri: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension XFree86-DRI > (II) LoadModule: "dri2" > (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so > (II) Module dri2: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DRI2 > (II) LoadModule: "intel" > (II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so > (II) Module intel: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 2.7.1 > Module class: X.Org Video Driver > ABI class: X.Org Video Driver, version 5.0 > (II) LoadModule: "kbd" > (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so > (II) Module kbd: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.3.2 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 4.0 > (II) LoadModule: "mouse" > (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so > (II) Module mouse: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.4.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 4.0 > (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, > i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, > E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, > 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, > Mobile Intel GM45 Express Chipset, > Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 > (II) Primary Device is: PCI 00@00:02:0 > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) resource ranges after probing: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/local/lib/xorg/modules//libvgahw.so > (II) Module vgahw: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 0.1.0 > ABI class: X.Org Video Driver, version 5.0 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Module "ramdac" already built-in > (**) intel(0): Depth 24, (--) framebuffer bpp 32 > (==) intel(0): RGB weight 888 > (==) intel(0): Default visual is TrueColor > (**) intel(0): Option "XvMC" "on" > (**) intel(0): Option "XvPreferOverlay" "on" > (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM > (--) intel(0): Chipset: "965GM" > (--) intel(0): Linear framebuffer at 0xE0000000 > (--) intel(0): IO registers at addr 0xF6E00000 > (==) intel(0): Using EXA for acceleration > (II) intel(0): 2 display pipes available. > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Module "ddc" already built-in > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Module "i2c" already built-in > (II) intel(0): Output VGA using monitor section Monitor0 > (II) intel(0): Output LVDS has no monitor section > (II) intel(0): I2C bus "LVDSDDC_C" initialized. > (II) intel(0): Attempting to determine panel fixed mode. > (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60. > (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. > (II) intel(0): EDID vendor "LCD", prod id 8966 > (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. > (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. > (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. > (II) intel(0): Output TMDS-1 has no monitor section > (II) intel(0): SDVOB: device VID/DID: 04:AE.00, clock range 25.0MHz - 165.0MHz > (II) intel(0): SDVOB: 1 input channel > (II) intel(0): SDVOB: TMDS0 output reported > (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. > (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. > (II) intel(0): No SDVO device found on SDVOC > (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. > (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. > (II) intel(0): Current clock rate multiplier: 1 > (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear > (II) intel(0): Resizable framebuffer: not available (1 3) > (II) intel(0): EDID vendor "LCD", prod id 8966 > (II) intel(0): Output VGA disconnected > (II) intel(0): Output LVDS connected > (II) intel(0): Output TMDS-1 disconnected > (II) intel(0): Using exact sizes for initial modes > (II) intel(0): Output LVDS using initial mode 1280x800 > (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear > (II) intel(0): detected 512 kB GTT. > (II) intel(0): detected 7676 kB stolen memory. > (==) intel(0): video overlay key set to 0x101fe > (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) > (**) intel(0): Display dimensions: (286, 179) mm > (**) intel(0): DPI set to (113, 181) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/local/lib/xorg/modules//libfb.so > (II) Module fb: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 1.0.0 > ABI class: X.Org ANSI C Emulation, version 0.4 > (II) Loading sub module "exa" > (II) LoadModule: "exa" > (II) Loading /usr/local/lib/xorg/modules//libexa.so > (II) Module exa: vendor="X.Org Foundation" > compiled for 1.6.1, module version = 2.4.0 > ABI class: X.Org Video Driver, version 5.0 > (II) intel(0): Comparing regs from server start up to After PreInit > (==) Depth 24 pixmap format is 32 bpp > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) > [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) > [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) > [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) > [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) > (II) intel(0): Kernel reported 491520 total, 0 used > (II) intel(0): I830CheckAvailableMemory: 1966080 kB available > (WW) intel(0): DRI2 requires UXA > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 9, (OK) > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 9, (OK) > drmOpenByBusid: Searching for BusID pci:0000:00:02.0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 9, (OK) > drmOpenByBusid: drmOpenMinor returns 9 > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 > (II) [drm] DRM interface version 1.2 > (II) [drm] DRM open master succeeded. > (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. > (II) intel(0): [drm] framebuffer mapped by ddx driver > (II) intel(0): [drm] added 1 reserved context for kernel > (II) intel(0): X context handle = 0x1 > (II) intel(0): [drm] installed DRM signal handler > (**) intel(0): Framebuffer compression disabled > (**) intel(0): Tiling enabled > (==) intel(0): VideoRam: 262144 KB > (II) intel(0): Attempting memory allocation with tiled buffers. > (II) intel(0): Tiled allocation successful. > (II) intel(0): [drm] Registers = 0xf6e00000 > (II) intel(0): [drm] ring buffer = 0xe0000000 > (II) intel(0): [drm] mapped front buffer at 0xe082b000, handle = 0xe082b000 > (II) intel(0): [drm] mapped back buffer at 0xe212c000, handle = 0xe212c000 > (II) intel(0): [drm] mapped depth buffer at 0xe276c000, handle = 0xe276c000 > (II) intel(0): [drm] mapped classic textures at 0xe2dac000, handle = 0xe2dac000 > (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432 > (II) intel(0): [dri] visual configs initialized > (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear > (II) EXA(0): Offscreen pixmap area of 19660800 bytes > (II) EXA(0): Driver registered support for the following operations: > (II) Solid > (II) Copy > (II) Composite (RENDER acceleration) > (==) intel(0): Backing store disabled > (==) intel(0): Silken mouse enabled > (II) intel(0): Initializing HW Cursor > (II) intel(0): [DRI] installation complete > (WW) intel(0): drmDropMaster failed: Unknown error: -1 > (II) intel(0): Current clock rate multiplier: 1 > (II) intel(0): xf86BindGARTMemory: bind key 10 at 0x0077f000 (pgoffset 1919) > (II) intel(0): xf86BindGARTMemory: bind key 11 at 0x0082a000 (pgoffset 2090) > (II) intel(0): xf86BindGARTMemory: bind key 12 at 0x0082b000 (pgoffset 2091) > (II) intel(0): xf86BindGARTMemory: bind key 13 at 0x00e6b000 (pgoffset 3691) > (II) intel(0): xf86BindGARTMemory: bind key 14 at 0x0212b000 (pgoffset 8491) > (II) intel(0): xf86BindGARTMemory: bind key 15 at 0x0212c000 (pgoffset 8492) > (II) intel(0): xf86BindGARTMemory: bind key 16 at 0x0276c000 (pgoffset 10092) > (II) intel(0): xf86BindGARTMemory: bind key 17 at 0x02dac000 (pgoffset 11692) > (II) intel(0): Fixed memory allocation layout: > (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) > (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB) > (II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB) > (II) intel(0): 0x0077f000: end of stolen memory > (II) intel(0): 0x0082a000-0x0082afff: overlay registers (4 kB) > (II) intel(0): 0x0082b000-0x00e6afff: front buffer (6400 kB) X tiled > (II) intel(0): 0x00e6b000-0x0212afff: exa offscreen (19200 kB) > (II) intel(0): 0x0212b000-0x0212bfff: power context (4 kB) > (II) intel(0): 0x0212c000-0x0276bfff: back buffer (6400 kB) X tiled > (II) intel(0): 0x0276c000-0x02dabfff: depth buffer (6400 kB) Y tiled > (II) intel(0): 0x02dac000-0x04dabfff: classic textures (32768 kB) > (II) intel(0): 0x10000000: end of aperture > (WW) intel(0): ESR is 0x00000001 > (WW) intel(0): Existing errors found in hardware state. > (II) intel(0): using SSC reference clock of 96 MHz > (II) intel(0): Selecting standard 18 bit TMDS pixel format. > (II) intel(0): Output configuration: > (II) intel(0): Pipe A is off > (II) intel(0): Display plane A is now disabled and connected to pipe A. > (II) intel(0): Pipe B is on > (II) intel(0): Display plane B is now enabled and connected to pipe B. > (II) intel(0): Output VGA is connected to pipe none > (II) intel(0): Output LVDS is connected to pipe B > (II) intel(0): Output TMDS-1 is connected to pipe none > (II) intel(0): [drm] dma control initialized, using IRQ 256 > (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. > (**) Option "dpms" "on" > (**) intel(0): DPMS enabled > (**) intel(0): Intel XvMC decoder enabled > (II) intel(0): Set up textured video > (II) intel(0): Set up overlay video > (II) intel(0): xf86BindGARTMemory: bind key 18 at 0x04dac000 (pgoffset 19884) > (II) intel(0): [XvMC] i965_xvmc driver initialized. > (II) intel(0): direct rendering: XF86DRI Enabled > (WW) intel(0): Option "XvMCSurfaces" is not used > (--) RandR disabled > (II) Initializing built-in extension Generic Event Extension > (II) Initializing built-in extension SHAPE > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension BIG-REQUESTS > (II) Initializing built-in extension SYNC > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension XC-MISC > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFIXES > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (II) Initializing built-in extension COMPOSITE > (II) Initializing built-in extension DAMAGE > (II) AIGLX: Screen 0 is not DRI2 capable > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 10, (OK) > drmOpenByBusid: Searching for BusID pci:0000:00:02.0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 10, (OK) > drmOpenByBusid: drmOpenMinor returns 10 > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 > (II) AIGLX: enabled GLX_SGI_make_current_read > (II) AIGLX: enabled GLX_MESA_copy_sub_buffer > (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control > (II) AIGLX: enabled GLX_texture_from_pixmap with driver support > (II) AIGLX: Loaded and initialized /usr/local/lib/dri/i965_dri.so > (II) GLX: Initialized DRI GL provider for screen 0 > (II) intel(0): Setting screen physical size to 287 x 180 > (**) Option "CoreKeyboard" > (**) Keyboard0: always reports core events > (**) Option "Protocol" "standard" > (**) Keyboard0: Protocol: standard > (**) Option "AutoRepeat" "250 30" > (**) Option "XkbRules" "xorg" > (**) Keyboard0: XkbRules: "xorg" > (**) Option "XkbModel" "pc104" > (**) Keyboard0: XkbModel: "pc104" > (**) Option "XkbLayout" "us" > (**) Keyboard0: XkbLayout: "us" > (**) Option "XkbOptions" "compose:ralt,terminate:ctrl_alt_bksp" > (**) Keyboard0: XkbOptions: "compose:ralt,terminate:ctrl_alt_bksp" > (**) Option "CustomKeycodes" "off" > (**) Keyboard0: CustomKeycodes disabled > (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) > (**) Option "Protocol" "auto" > (**) Mouse0: Device: "/dev/sysmouse" > (**) Mouse0: Protocol: "auto" > (**) Option "CorePointer" > (**) Mouse0: always reports core events > (**) Option "Device" "/dev/sysmouse" > (**) Option "Emulate3Buttons" "false" > (**) Mouse0: ZAxisMapping: buttons 4 and 5 > (**) Mouse0: Buttons: 9 > (**) Mouse0: Sensitivity: 1 > (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) > (**) Mouse0: (accel) keeping acceleration scheme 1 > (**) Mouse0: (accel) filter chain progression: 2.00 > (**) Mouse0: (accel) filter stage 0: 20.00 ms > (**) Mouse0: (accel) set acceleration profile 0 > (II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0 > (II) Mouse0: SetupAuto: protocol is SysMouse > (II) intel(0): EDID vendor "LCD", prod id 8966 > (II) intel(0): Using EDID range info for horizontal sync > (II) intel(0): Using EDID range info for vertical refresh > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "1280x800"x0.0 72.10 1280 1296 1344 1448 800 802 804 830 -hsync -vsync (49.8 kHz) > (II) intel(0): EDID vendor "LCD", prod id 8966 > _______________________________________________ > freebsd-x11@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-x11 > To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090701/8502746c/attachment.pgp From ruesing at kdo.de Wed Jul 1 13:49:11 2009 From: ruesing at kdo.de (=?ISO-8859-15?Q?Gerrit_R=FCsing?=) Date: Wed Jul 1 13:49:19 2009 Subject: Stop in /usr/ports/x11/libX11 Message-ID: <4A4B647C.8070300@kdo.de> Hello, I'm having a problem compiling the libX11 libs for xf86-video-intel or xorg-video. Compiler stops with a syntax error. appending configuration tag "F77" to libtool checking for gcc... (cached) cc checking whether we are using the GNU C compiler... (cached) yes checking whether cc accepts -g... (cached) yes checking for cc option to accept ISO C89... (cached) none needed checking dependency style of cc... (cached) gcc3 CWARNFLAGS+= -Wold-style-definition -Wdeclaration-after-statement: not found checking for cpp... /usr/bin/cpp checking if /usr/bin/cpp requires -undef... yes checking if /usr/bin/cpp requires -traditional... yes checking whether to use XCB... (cached) yes ./configure: 21141: Syntax error: word unexpected (expecting ")") ===> Script "configure" failed unexpectedly. Please report the problem to x11@FreeBSD.org [maintainer] and attach the "/usr/ports/x11/libX11/work/libX11-1.2/config.log" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. an `ls /var/db/pkg`). *** Error code 1 Stop in /usr/ports/x11/libX11. *** Error code 1 Stop in /usr/ports/x11/libXvMC. *** Error code 1 Stop in /usr/ports/x11-drivers/xf86-video-intel Best regards Gerrit Ruesing -------------- next part -------------- This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by libX11 configure 1.2, which was generated by GNU Autoconf 2.62. Invocation command line was $ ./configure --datadir=/usr/local/lib --with-xcb=yes --enable-malloc0returnsnull --x-libraries=/usr/local/lib --x-includes=/usr/local/include --prefix=/usr/local --mandir=/usr/local/man --infodir=/usr/local/info/ --build=i386-portbld-freebsd7.2 ## --------- ## ## Platform. ## ## --------- ## hostname = pcbsd uname -m = i386 uname -r = 7.2-PRERELEASE uname -s = FreeBSD uname -v = FreeBSD 7.2-PRERELEASE #12: Fri Apr 17 15:37:58 EDT 2009 root@pcbsdx32-7:/usr/obj/pcbsd-build71/cvs/7.1-src/sys/PCBSD /usr/bin/uname -p = i386 /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /sbin PATH: /bin PATH: /usr/sbin PATH: /usr/bin PATH: /usr/games PATH: /Programs/bin PATH: /PCBSD/local/bin PATH: /PCBSD/local/sbin PATH: /PCBSD/local/kde4/bin PATH: /usr/local/sbin PATH: /usr/local/bin PATH: /usr/local/kde4/bin PATH: /root/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:2208: checking for a BSD-compatible install configure:2276: result: /usr/bin/install -c -o root -g wheel configure:2287: checking whether build environment is sane configure:2330: result: yes configure:2355: checking for a thread-safe mkdir -p configure:2394: result: ./install-sh -c -d configure:2407: checking for gawk configure:2423: found /PCBSD/local/bin/gawk configure:2434: result: gawk configure:2445: checking whether make sets $(MAKE) configure:2467: result: yes configure:2656: checking whether to enable maintainer-specific portions of Makefiles configure:2665: result: no configure:2690: checking if xorg-macros used to generate configure is at least 1.2 configure:2705: result: yes, 1.2.1 configure:2788: checking build system type configure:2806: result: i386-portbld-freebsd7.2 configure:2828: checking host system type configure:2843: result: i386-portbld-freebsd7.2 configure:2877: checking for style of include used by make configure:2905: result: GNU configure:2975: checking for gcc configure:3002: result: cc configure:3240: checking for C compiler version configure:3248: cc --version >&5 cc (GCC) 4.2.1 20070719 [FreeBSD] Copyright (C) 2007 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:3252: $? = 0 configure:3259: cc -v >&5 Using built-in specs. Target: i386-undermydesk-freebsd Configured with: FreeBSD/i386 system compiler Thread model: posix gcc version 4.2.1 20070719 [FreeBSD] configure:3263: $? = 0 configure:3270: cc -V >&5 cc: '-V' option must have argument configure:3274: $? = 1 configure:3297: checking for C compiler default output file name configure:3319: cc -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:3323: $? = 0 configure:3361: result: a.out configure:3378: checking whether the C compiler works configure:3388: ./a.out configure:3392: $? = 0 configure:3409: result: yes configure:3416: checking whether we are cross compiling configure:3418: result: no configure:3421: checking for suffix of executables configure:3428: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:3432: $? = 0 configure:3456: result: configure:3462: checking for suffix of object files configure:3488: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:3492: $? = 0 configure:3515: result: o configure:3519: checking whether we are using the GNU C compiler configure:3548: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:3555: $? = 0 configure:3572: result: yes configure:3581: checking whether cc accepts -g configure:3611: cc -c -g conftest.c >&5 configure:3618: $? = 0 configure:3719: result: yes configure:3736: checking for cc option to accept ISO C89 configure:3810: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:3817: $? = 0 configure:3840: result: none needed configure:3860: checking dependency style of cc configure:3951: result: gcc3 configure:3966: checking for a sed that does not truncate output configure:4022: result: /usr/bin/sed configure:4025: checking for grep that handles long lines and -e configure:4085: result: /usr/bin/grep configure:4090: checking for egrep configure:4154: result: /usr/bin/grep -E configure:4170: checking for ld used by cc configure:4237: result: /usr/bin/ld configure:4246: checking if the linker (/usr/bin/ld) is GNU ld configure:4261: result: yes configure:4266: checking for /usr/bin/ld option to reload object files configure:4273: result: -r configure:4291: checking for BSD-compatible nm configure:4340: result: /usr/bin/nm -B configure:4344: checking whether ln -s works configure:4348: result: yes configure:4355: checking how to recognize dependent libraries configure:4541: result: pass_all configure:4790: checking how to run the C preprocessor configure:4830: cc -E conftest.c configure:4837: $? = 0 configure:4868: cc -E conftest.c conftest.c:10:28: error: ac_nonexistent.h: No such file or directory configure:4875: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "libX11" | #define PACKAGE_TARNAME "libX11" | #define PACKAGE_VERSION "1.2" | #define PACKAGE_STRING "libX11 1.2" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "libX11" | #define VERSION "1.2" | /* end confdefs.h. */ | #include configure:4908: result: cc -E configure:4937: cc -E conftest.c configure:4944: $? = 0 configure:4975: cc -E conftest.c conftest.c:10:28: error: ac_nonexistent.h: No such file or directory configure:4982: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "libX11" | #define PACKAGE_TARNAME "libX11" | #define PACKAGE_VERSION "1.2" | #define PACKAGE_STRING "libX11 1.2" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "libX11" | #define VERSION "1.2" | /* end confdefs.h. */ | #include configure:5020: checking for ANSI C header files configure:5050: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:5057: $? = 0 configure:5156: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:5160: $? = 0 configure:5166: ./conftest configure:5170: $? = 0 configure:5188: result: yes configure:5212: checking for sys/types.h configure:5233: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:5240: $? = 0 configure:5257: result: yes configure:5212: checking for sys/stat.h configure:5233: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:5240: $? = 0 configure:5257: result: yes configure:5212: checking for stdlib.h configure:5233: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:5240: $? = 0 configure:5257: result: yes configure:5212: checking for string.h configure:5233: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:5240: $? = 0 configure:5257: result: yes configure:5212: checking for memory.h configure:5233: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:5240: $? = 0 configure:5257: result: yes configure:5212: checking for strings.h configure:5233: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:5240: $? = 0 configure:5257: result: yes configure:5212: checking for inttypes.h configure:5233: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:5240: $? = 0 configure:5257: result: yes configure:5212: checking for stdint.h configure:5233: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:5240: $? = 0 configure:5257: result: yes configure:5212: checking for unistd.h configure:5233: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:5240: $? = 0 configure:5257: result: yes configure:5286: checking dlfcn.h usability configure:5303: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:5310: $? = 0 configure:5324: result: yes configure:5328: checking dlfcn.h presence configure:5343: cc -E conftest.c configure:5350: $? = 0 configure:5364: result: yes configure:5397: checking for dlfcn.h configure:5406: result: yes configure:5536: checking for C++ compiler version configure:5544: c++ --version >&5 c++ (GCC) 4.2.1 20070719 [FreeBSD] Copyright (C) 2007 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:5548: $? = 0 configure:5555: c++ -v >&5 Using built-in specs. Target: i386-undermydesk-freebsd Configured with: FreeBSD/i386 system compiler Thread model: posix gcc version 4.2.1 20070719 [FreeBSD] configure:5559: $? = 0 configure:5566: c++ -V >&5 c++: '-V' option must have argument configure:5570: $? = 1 configure:5573: checking whether we are using the GNU C++ compiler configure:5602: c++ -c -O2 -fno-strict-aliasing -pipe conftest.cpp >&5 configure:5609: $? = 0 configure:5626: result: yes configure:5635: checking whether c++ accepts -g configure:5665: c++ -c -g conftest.cpp >&5 configure:5672: $? = 0 configure:5773: result: yes configure:5798: checking dependency style of c++ configure:5889: result: gcc3 configure:5914: checking how to run the C++ preprocessor configure:5950: c++ -E conftest.cpp configure:5957: $? = 0 configure:5988: c++ -E conftest.cpp conftest.cpp:21:28: error: ac_nonexistent.h: No such file or directory configure:5995: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "libX11" | #define PACKAGE_TARNAME "libX11" | #define PACKAGE_VERSION "1.2" | #define PACKAGE_STRING "libX11 1.2" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "libX11" | #define VERSION "1.2" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | /* end confdefs.h. */ | #include configure:6028: result: c++ -E configure:6057: c++ -E conftest.cpp configure:6064: $? = 0 configure:6095: c++ -E conftest.cpp conftest.cpp:21:28: error: ac_nonexistent.h: No such file or directory configure:6102: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "libX11" | #define PACKAGE_TARNAME "libX11" | #define PACKAGE_VERSION "1.2" | #define PACKAGE_STRING "libX11 1.2" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "libX11" | #define VERSION "1.2" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | /* end confdefs.h. */ | #include configure:6195: checking for g77 configure:6225: result: no configure:6195: checking for xlf configure:6225: result: no configure:6195: checking for f77 configure:6225: result: no configure:6195: checking for frt configure:6225: result: no configure:6195: checking for pgf77 configure:6225: result: no configure:6195: checking for cf77 configure:6225: result: no configure:6195: checking for fort77 configure:6225: result: no configure:6195: checking for fl32 configure:6225: result: no configure:6195: checking for af77 configure:6225: result: no configure:6195: checking for xlf90 configure:6225: result: no configure:6195: checking for f90 configure:6225: result: no configure:6195: checking for pgf90 configure:6225: result: no configure:6195: checking for pghpf configure:6225: result: no configure:6195: checking for epcf90 configure:6225: result: no configure:6195: checking for gfortran configure:6225: result: no configure:6195: checking for g95 configure:6225: result: no configure:6195: checking for xlf95 configure:6225: result: no configure:6195: checking for f95 configure:6225: result: no configure:6195: checking for fort configure:6225: result: no configure:6195: checking for ifort configure:6225: result: no configure:6195: checking for ifc configure:6225: result: no configure:6195: checking for efc configure:6225: result: no configure:6195: checking for pgf95 configure:6225: result: no configure:6195: checking for lf95 configure:6225: result: no configure:6195: checking for ftn configure:6225: result: no configure:6252: checking for Fortran 77 compiler version configure:6260: --version >&5 --version: not found configure:6264: $? = 127 configure:6271: -v >&5 -v: not found configure:6275: $? = 127 configure:6282: -V >&5 -V: not found configure:6286: $? = 127 configure:6294: checking whether we are using the GNU Fortran 77 compiler configure:6313: -c conftest.F >&5 -c: not found configure:6320: $? = 127 configure: failed program was: | program main | #ifndef __GNUC__ | choke me | #endif | | end configure:6337: result: no configure:6343: checking whether accepts -g configure:6360: -c -g conftest.f >&5 -c: not found configure:6367: $? = 127 configure: failed program was: | program main | | end configure:6383: result: no configure:6416: checking the maximum length of command line arguments configure:6528: result: 262144 configure:6540: checking command to parse /usr/bin/nm -B output from cc object configure:6645: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:6648: $? = 0 configure:6652: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' \> conftest.nm configure:6655: $? = 0 configure:6707: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c conftstm.o >&5 configure:6710: $? = 0 configure:6748: result: ok configure:6752: checking for objdir configure:6767: result: .libs configure:6859: checking for ar configure:6875: found /usr/bin/ar configure:6886: result: ar configure:6955: checking for ranlib configure:6971: found /usr/bin/ranlib configure:6982: result: ranlib configure:7051: checking for strip configure:7067: found /usr/bin/strip configure:7078: result: strip configure:7680: checking if cc supports -fno-rtti -fno-exceptions configure:7698: cc -c -O2 -fno-strict-aliasing -pipe -fno-rtti -fno-exceptions conftest.c >&5 cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C configure:7702: $? = 0 configure:7715: result: no configure:7730: checking for cc option to produce PIC configure:7962: result: -fPIC configure:7970: checking if cc PIC flag -fPIC works configure:7988: cc -c -O2 -fno-strict-aliasing -pipe -fPIC -DPIC conftest.c >&5 configure:7992: $? = 0 configure:8005: result: yes configure:8033: checking if cc static flag -static works configure:8061: result: yes configure:8071: checking if cc supports -c -o file.o configure:8092: cc -c -O2 -fno-strict-aliasing -pipe -o out/conftest2.o conftest.c >&5 configure:8096: $? = 0 configure:8118: result: yes configure:8144: checking whether the cc linker (/usr/bin/ld) supports shared libraries configure:9132: result: yes configure:9153: checking whether -lc should be explicitly linked in configure:9158: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:9161: $? = 0 configure:9176: cc -shared conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| grep -lc \>/dev/null 2\>\&1 configure:9179: $? = 0 configure:9191: result: no configure:9199: checking dynamic linker characteristics configure:9801: result: freebsd7.2 ld.so configure:9825: checking how to hardcode library paths into programs configure:9850: result: immediate configure:9864: checking whether stripping libraries is possible configure:9869: result: yes configure:10699: checking if libtool supports shared libraries configure:10701: result: yes configure:10704: checking whether to build shared libraries configure:10725: result: yes configure:10728: checking whether to build static libraries configure:10732: result: yes configure:10826: creating libtool configure:11419: checking for ld used by c++ configure:11486: result: /usr/bin/ld configure:11495: checking if the linker (/usr/bin/ld) is GNU ld configure:11510: result: yes configure:11561: checking whether the c++ linker (/usr/bin/ld) supports shared libraries configure:12515: result: yes configure:12532: c++ -c -O2 -fno-strict-aliasing -pipe conftest.cpp >&5 configure:12535: $? = 0 configure:12691: checking for c++ option to produce PIC configure:12975: result: -fPIC configure:12983: checking if c++ PIC flag -fPIC works configure:13001: c++ -c -O2 -fno-strict-aliasing -pipe -fPIC -DPIC conftest.cpp >&5 configure:13005: $? = 0 configure:13018: result: yes configure:13046: checking if c++ static flag -static works configure:13074: result: yes configure:13084: checking if c++ supports -c -o file.o configure:13105: c++ -c -O2 -fno-strict-aliasing -pipe -o out/conftest2.o conftest.cpp >&5 configure:13109: $? = 0 configure:13131: result: yes configure:13157: checking whether the c++ linker (/usr/bin/ld) supports shared libraries configure:13183: result: yes configure:13250: checking dynamic linker characteristics configure:13800: result: freebsd7.2 ld.so configure:13824: checking how to hardcode library paths into programs configure:13849: result: immediate configure:20134: checking for gcc configure:20161: result: cc configure:20399: checking for C compiler version configure:20407: cc --version >&5 cc (GCC) 4.2.1 20070719 [FreeBSD] Copyright (C) 2007 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:20411: $? = 0 configure:20418: cc -v >&5 Using built-in specs. Target: i386-undermydesk-freebsd Configured with: FreeBSD/i386 system compiler Thread model: posix gcc version 4.2.1 20070719 [FreeBSD] configure:20422: $? = 0 configure:20429: cc -V >&5 cc: '-V' option must have argument configure:20433: $? = 1 configure:20436: checking whether we are using the GNU C compiler configure:20489: result: yes configure:20498: checking whether cc accepts -g configure:20636: result: yes configure:20653: checking for cc option to accept ISO C89 configure:20757: result: none needed configure:20777: checking dependency style of cc configure:20868: result: gcc3 configure:21017: checking for cpp configure:21036: found /usr/bin/cpp configure:21048: result: /usr/bin/cpp configure:21064: checking if /usr/bin/cpp requires -undef configure:21075: result: yes configure:21090: checking if /usr/bin/cpp requires -traditional configure:21101: result: yes configure:21122: checking whether to use XCB configure:21129: result: yes ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=i386-portbld-freebsd7.2 ac_cv_c_compiler_gnu=yes ac_cv_cxx_compiler_gnu=yes ac_cv_env_CCC_set='' ac_cv_env_CCC_value='' ac_cv_env_CC_set=set ac_cv_env_CC_value=cc ac_cv_env_CFLAGS_set=set ac_cv_env_CFLAGS_value='-O2 -fno-strict-aliasing -pipe' ac_cv_env_CPPFLAGS_set='' ac_cv_env_CPPFLAGS_value='' ac_cv_env_CPP_set='' ac_cv_env_CPP_value='' ac_cv_env_CXXCPP_set='' ac_cv_env_CXXCPP_value='' ac_cv_env_CXXFLAGS_set=set ac_cv_env_CXXFLAGS_value='-O2 -fno-strict-aliasing -pipe' ac_cv_env_CXX_set=set ac_cv_env_CXX_value=c++ ac_cv_env_F77_set='' ac_cv_env_F77_value='' ac_cv_env_FFLAGS_set='' ac_cv_env_FFLAGS_value='' ac_cv_env_LDFLAGS_set='' ac_cv_env_LDFLAGS_value='' ac_cv_env_LIBS_set='' ac_cv_env_LIBS_value='' ac_cv_env_build_alias_set=set ac_cv_env_build_alias_value=i386-portbld-freebsd7.2 ac_cv_env_host_alias_set='' ac_cv_env_host_alias_value='' ac_cv_env_target_alias_set='' ac_cv_env_target_alias_value='' ac_cv_f77_compiler_gnu=no ac_cv_header_dlfcn_h=yes ac_cv_header_inttypes_h=yes ac_cv_header_memory_h=yes ac_cv_header_stdc=yes ac_cv_header_stdint_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_strings_h=yes ac_cv_header_sys_stat_h=yes ac_cv_header_sys_types_h=yes ac_cv_header_unistd_h=yes ac_cv_host=i386-portbld-freebsd7.2 ac_cv_objext=o ac_cv_path_EGREP='/usr/bin/grep -E' ac_cv_path_GREP=/usr/bin/grep ac_cv_path_RAWCPP=/usr/bin/cpp ac_cv_prog_AWK=gawk ac_cv_prog_CPP='cc -E' ac_cv_prog_CXXCPP='c++ -E' ac_cv_prog_ac_ct_AR=ar ac_cv_prog_ac_ct_CC=cc ac_cv_prog_ac_ct_RANLIB=ranlib ac_cv_prog_ac_ct_STRIP=strip ac_cv_prog_cc_c89='' ac_cv_prog_cc_g=yes ac_cv_prog_cxx_g=yes ac_cv_prog_f77_g=no ac_cv_prog_make_make_set=yes ac_cv_use_xcb=yes am_cv_CC_dependencies_compiler_type=gcc3 am_cv_CXX_dependencies_compiler_type=gcc3 lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file='' lt_cv_ld_reload_flag=-r lt_cv_objdir=.libs lt_cv_path_LD=/usr/bin/ld lt_cv_path_LDCXX=/usr/bin/ld lt_cv_path_NM='/usr/bin/nm -B' lt_cv_path_SED=/usr/bin/sed lt_cv_prog_compiler_c_o=yes lt_cv_prog_compiler_c_o_CXX=yes lt_cv_prog_compiler_pic_works=yes lt_cv_prog_compiler_pic_works_CXX=yes lt_cv_prog_compiler_rtti_exceptions=no lt_cv_prog_compiler_static_works=yes lt_cv_prog_compiler_static_works_CXX=yes lt_cv_prog_gnu_ld=yes lt_cv_prog_gnu_ldcxx=yes lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\''' lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr) \&\2},/p'\''' lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^. .* \(.*\)$/extern int \1;/p'\''' lt_cv_sys_lib_dlsearch_path_spec='/lib /usr/lib' lt_cv_sys_lib_search_path_spec=/usr/lib lt_cv_sys_max_cmd_len=262144 lt_lt_cv_prog_compiler_c_o='"yes"' lt_lt_cv_prog_compiler_c_o_CXX='"yes"' lt_lt_cv_sys_global_symbol_pipe='"sed -n -e '\''s/^.*[ ]\\([ABCDGIRSTW][ABCDGIRSTW]*\\)[ ][ ]*\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2 \\2/p'\''"' lt_lt_cv_sys_global_symbol_to_c_name_address='"sed -n -e '\''s/^: \\([^ ]*\\) \$/ {\\\"\\1\\\", (lt_ptr) 0},/p'\'' -e '\''s/^[BCDEGRST] \\([^ ]*\\) \\([^ ]*\\)\$/ {\"\\2\", (lt_ptr) \\&\\2},/p'\''"' lt_lt_cv_sys_global_symbol_to_cdecl='"sed -n -e '\''s/^. .* \\(.*\\)\$/extern int \\1;/p'\''"' ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='/usr/local/bin/aclocal-1.10' ADMIN_MAN_DIR='' ADMIN_MAN_SUFFIX='' AMDEPBACKSLASH='\' AMDEP_FALSE='#' AMDEP_TRUE='' AMTAR='${SHELL} /usr/ports/x11/libX11/work/libX11-1.2/missing --run tar' APP_MAN_DIR='' APP_MAN_SUFFIX='' AR='ar' AUTOCONF='/usr/local/bin/autoconf-2.62' AUTOHEADER='/usr/local/bin/autoheader-2.62' AUTOMAKE='/usr/local/bin/automake-1.10' AWK='gawk' BIGFONT_CFLAGS='' BIGFONT_LIBS='' CC='cc' CCDEPMODE='depmode=gcc3' CC_FOR_BUILD='cc' CFLAGS='-O2 -fno-strict-aliasing -pipe' CHANGELOG_CMD='' CPP='cc -E' CPPFLAGS='' CWARNFLAGS='-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -Wbad-function-cast' CXX='c++' CXXCPP='c++ -E' CXXDEPMODE='depmode=gcc3' CXXFLAGS='-O2 -fno-strict-aliasing -pipe' CYGPATH_W='echo' DEFS='' DEPDIR='.deps' DRIVER_MAN_DIR='' DRIVER_MAN_SUFFIX='' DSYMUTIL='' ECHO='echo' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='/usr/bin/grep -E' EXEEXT='' F77='' FFLAGS='' FILE_MAN_DIR='' FILE_MAN_SUFFIX='' GREP='/usr/bin/grep' I18N_MODULE_LIBS='' INSTALL_DATA='install -o root -g wheel -m 444' INSTALL_PROGRAM='install -s -o root -g wheel -m 555' INSTALL_SCRIPT='install -o root -g wheel -m 555' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' KEYSYMDEF='' LAUNCHD='' LDFLAGS='' LIBOBJS='' LIBS='' LIBTOOL='$(SHELL) /usr/local/bin/libtool' LIB_MAN_DIR='' LIB_MAN_SUFFIX='' LINT='' LINTLIB='' LINT_FALSE='' LINT_FLAGS='' LINT_TRUE='' LN_S='ln -s' LTLIBOBJS='' MAINT='#' MAINTAINER_MODE_FALSE='' MAINTAINER_MODE_TRUE='#' MAKEINFO='${SHELL} /usr/ports/x11/libX11/work/libX11-1.2/missing --run makeinfo' MAKE_LINT_LIB_FALSE='' MAKE_LINT_LIB_TRUE='' MALLOC_ZERO_CFLAGS='' MANPAGES_FALSE='' MANPAGES_TRUE='' MISC_MAN_DIR='' MISC_MAN_SUFFIX='' MKDIR_P='./install-sh -c -d' NMEDIT='' OBJEXT='o' OS2_FALSE='' OS2_TRUE='' PACKAGE='libX11' PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg' PACKAGE_NAME='libX11' PACKAGE_STRING='libX11 1.2' PACKAGE_TARNAME='libX11' PACKAGE_VERSION='1.2' PATH_SEPARATOR=':' RANLIB='ranlib' RAWCPP='/usr/bin/cpp' RAWCPPFLAGS='-undef -traditional' SED='/usr/bin/sed' SET_MAKE='' SHELL='/bin/sh' STRIP='strip' THRSTUBS_FALSE='' THRSTUBS_TRUE='' UDC_FALSE='' UDC_TRUE='' VERSION='1.2' WCHAR32='' X11_CFLAGS='' X11_DATADIR='' X11_EXTRA_DEPS='' X11_LIBDIR='' X11_LIBS='' X11_LOCALEDATADIR='' X11_LOCALEDIR='' X11_LOCALELIBDIR='' XCB_FALSE='#' XCB_TRUE='' XCMS_FALSE='' XCMS_TRUE='' XDMCP_CFLAGS='' XDMCP_LIBS='' XERRORDB='' XKBPROTO_REQUIRES='' XKB_FALSE='' XKB_TRUE='' XKEYSYMDB='' XLIB_LOADABLE_I18N_FALSE='' XLIB_LOADABLE_I18N_TRUE='' XLOCALEDATADIR='' XLOCALEDIR='' XLOCALELIBDIR='' XLOCALE_FALSE='' XLOCALE_TRUE='' XMALLOC_ZERO_CFLAGS='' XPROTO_CFLAGS='' XTHREADLIB='' XTHREAD_CFLAGS='' XTMALLOC_ZERO_CFLAGS='' ac_ct_CC='cc' ac_ct_CXX='' ac_ct_F77='' am__fastdepCC_FALSE='#' am__fastdepCC_TRUE='' am__fastdepCXX_FALSE='#' am__fastdepCXX_TRUE='' am__include='include' am__isrc='' am__leading_dot='.' am__quote='' am__tar='${AMTAR} chof - "$$tardir"' am__untar='${AMTAR} xf -' bindir='${exec_prefix}/bin' build='i386-portbld-freebsd7.2' build_alias='i386-portbld-freebsd7.2' build_cpu='i386' build_os='freebsd7.2' build_vendor='portbld' datadir='/usr/local/lib' datarootdir='${prefix}/share' distcleancheck_listfiles='' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='NONE' host='i386-portbld-freebsd7.2' host_alias='' host_cpu='i386' host_os='freebsd7.2' host_vendor='portbld' htmldir='${docdir}' includedir='${prefix}/include' infodir='/usr/local/info' install_sh='$(SHELL) /usr/ports/x11/libX11/work/libX11-1.2/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' mandir='/usr/local/man' mkdir_p='$(top_builddir)/./install-sh -c -d' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='/usr/local' program_transform_name='s,x,x,' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='${prefix}/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## #define PACKAGE_NAME "libX11" #define PACKAGE_TARNAME "libX11" #define PACKAGE_VERSION "1.2" #define PACKAGE_STRING "libX11 1.2" #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" #define PACKAGE "libX11" #define VERSION "1.2" #define STDC_HEADERS 1 #define HAVE_SYS_TYPES_H 1 #define HAVE_SYS_STAT_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_MEMORY_H 1 #define HAVE_STRINGS_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_STDINT_H 1 #define HAVE_UNISTD_H 1 #define HAVE_DLFCN_H 1 configure: exit 2 -------------- next part -------------- autoconf-2.62 autoconf-wrapper-20071109 automake-1.10.1 automake-wrapper-20071109 bigreqsproto-1.0.2 compositeproto-0.4 damageproto-1.1.0_2 dri2proto-1.99.3 fixesproto-4.0 fontsproto-2.0.2 glproto-1.4.9 inputproto-1.5.0 kbproto-1.0.3 libXau-1.0.4 libXdmcp-1.0.2_1 libcheck-0.9.6 libpthread-stubs-0.1 libtool-1.5.26 libxcb-1.2 m4-1.4.12,1 perl-5.8.9_2 python25-2.5.4_1 randrproto-1.2.1 renderproto-0.9.3 resourceproto-1.0.2 scrnsaverproto-1.1.0 videoproto-2.2.2 xcb-proto-1.4 xcmiscproto-1.1.2 xextproto-7.0.5 xf86bigfontproto-1.1.2 xf86dgaproto-2.0.3 xf86driproto-2.0.4 xf86miscproto-0.9.2 xf86vidmodeproto-2.2.2 xineramaproto-1.1.2 xorg-macros-1.2.1 xproto-7.0.15 xtrans-1.2.3 From kris at pcbsd.org Wed Jul 1 14:13:21 2009 From: kris at pcbsd.org (Kris Moore) Date: Wed Jul 1 14:13:28 2009 Subject: Stop in /usr/ports/x11/libX11 In-Reply-To: <4A4B647C.8070300@kdo.de> References: <4A4B647C.8070300@kdo.de> Message-ID: Gerrit, I see that you are on PC-BSD 7.1. Please refer to the doc below before building ports in the /PCBSD/local LOCALBASE, which is what you are attempting to do by updating the intel driver I assume :) http://wiki.pcbsd.org/index.php/PC-BSD_Users_Handbook#Modifying_the_PC-BSD_ports_base -- Kris Moore PC-BSD Software On Wed, 1 Jul 2009, Gerrit R?sing wrote: > Hello, > > I'm having a problem compiling the libX11 libs for xf86-video-intel or > xorg-video. > Compiler stops with a syntax error. > > appending configuration tag "F77" to libtool > checking for gcc... (cached) cc > checking whether we are using the GNU C compiler... (cached) yes > checking whether cc accepts -g... (cached) yes > checking for cc option to accept ISO C89... (cached) none needed > checking dependency style of cc... (cached) gcc3 > CWARNFLAGS+= -Wold-style-definition -Wdeclaration-after-statement: not found > checking for cpp... /usr/bin/cpp > checking if /usr/bin/cpp requires -undef... yes > checking if /usr/bin/cpp requires -traditional... yes > checking whether to use XCB... (cached) yes > ./configure: 21141: Syntax error: word unexpected (expecting ")") > ===> Script "configure" failed unexpectedly. > Please report the problem to x11@FreeBSD.org [maintainer] and attach the > "/usr/ports/x11/libX11/work/libX11-1.2/config.log" including the output of > the failure of your make command. Also, it might be a good idea to provide > an overview of all packages installed on your system (e.g. an `ls > /var/db/pkg`). > *** Error code 1 > > Stop in /usr/ports/x11/libX11. > *** Error code 1 > > Stop in /usr/ports/x11/libXvMC. > *** Error code 1 > > Stop in /usr/ports/x11-drivers/xf86-video-intel > > Best regards > Gerrit Ruesing > > > !DSPAM:1,4a4b69ad825699845612803! > From ch.brunner at web.de Thu Jul 2 14:00:13 2009 From: ch.brunner at web.de (Christoph Brunner) Date: Thu Jul 2 14:00:19 2009 Subject: Glidepoint + Scrolling Message-ID: <4A4CB59A.5000801@web.de> Hi, i posted this some time ago already on freebsd-mobile, but got no answer. Maybe it was the wrong list, so i will try it here. On a Dell Precision M2300 laptop i am trying FreeBSD 8.0-CURRENT i386. It runs so long but i cannot get the touchpad to provide scrolling (in X). The touchpad identifies as GlidePoint. # dmesg | grep psm psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: [ITHREAD] psm0: model GlidePoint, device ID 0 Setting VertEdgeScroll, VertScrollDelta, *Edge options in xorg.conf i didn't have success. Does anybody have a working setup with Glidepoint and scrolling? How do i get this to work? Thank you in advance. Best regards, Chris From rnoland at FreeBSD.org Thu Jul 2 14:08:21 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Thu Jul 2 14:08:27 2009 Subject: Glidepoint + Scrolling In-Reply-To: <4A4CB59A.5000801@web.de> References: <4A4CB59A.5000801@web.de> Message-ID: <1246543693.1855.38.camel@balrog.2hip.net> On Thu, 2009-07-02 at 15:26 +0200, Christoph Brunner wrote: > Hi, > > i posted this some time ago already on freebsd-mobile, but got no > answer. Maybe it was the wrong list, so i will try it here. > > On a Dell Precision M2300 laptop i am trying FreeBSD 8.0-CURRENT i386. > It runs so long but i cannot get the touchpad to provide scrolling > (in X). > > The touchpad identifies as GlidePoint. > > # dmesg | grep psm > psm0: irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: [ITHREAD] > psm0: model GlidePoint, device ID 0 > > Setting VertEdgeScroll, VertScrollDelta, *Edge options in xorg.conf > i didn't have success. > > Does anybody have a working setup with Glidepoint and scrolling? How do > i get this to work? There has been some discussion of this on the Xorg lists with regard to Glidepoint. I'm not sure what the outcome was though. I'm reasonably confident that this is not a FreeBSD specific issue though. I'll try and check the latest status of the synaptics driver. robert. > Thank you in advance. > > Best regards, > Chris > _______________________________________________ > freebsd-x11@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-x11 > To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090702/7ccffd28/attachment.pgp From rnoland at FreeBSD.org Thu Jul 2 14:15:38 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Thu Jul 2 14:15:45 2009 Subject: Glidepoint + Scrolling In-Reply-To: <1246543693.1855.38.camel@balrog.2hip.net> References: <4A4CB59A.5000801@web.de> <1246543693.1855.38.camel@balrog.2hip.net> Message-ID: <1246544129.1855.40.camel@balrog.2hip.net> On Thu, 2009-07-02 at 09:08 -0500, Robert Noland wrote: > On Thu, 2009-07-02 at 15:26 +0200, Christoph Brunner wrote: > > Hi, > > > > i posted this some time ago already on freebsd-mobile, but got no > > answer. Maybe it was the wrong list, so i will try it here. > > > > On a Dell Precision M2300 laptop i am trying FreeBSD 8.0-CURRENT i386. > > It runs so long but i cannot get the touchpad to provide scrolling > > (in X). > > > > The touchpad identifies as GlidePoint. > > > > # dmesg | grep psm > > psm0: irq 12 on atkbdc0 > > psm0: [GIANT-LOCKED] > > psm0: [ITHREAD] > > psm0: model GlidePoint, device ID 0 > > > > Setting VertEdgeScroll, VertScrollDelta, *Edge options in xorg.conf > > i didn't have success. > > > > Does anybody have a working setup with Glidepoint and scrolling? How do > > i get this to work? > > There has been some discussion of this on the Xorg lists with regard to > Glidepoint. I'm not sure what the outcome was though. I'm reasonably > confident that this is not a FreeBSD specific issue though. I'll try > and check the latest status of the synaptics driver. It looks like this may be handled in git. Please see: X.Org Bug 21214 http://bugs.freedesktop.org/show_bug.cgi?id=21214 robert. > robert. > > > Thank you in advance. > > > > Best regards, > > Chris > > _______________________________________________ > > freebsd-x11@freebsd.org mailing list > > http://lists.freebsd.org/mailman/listinfo/freebsd-x11 > > To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090702/a83db31f/attachment.pgp From ch.brunner at web.de Fri Jul 3 17:31:47 2009 From: ch.brunner at web.de (Christoph Brunner) Date: Fri Jul 3 17:31:54 2009 Subject: Glidepoint + Scrolling In-Reply-To: <1246544129.1855.40.camel@balrog.2hip.net> References: <4A4CB59A.5000801@web.de> <1246543693.1855.38.camel@balrog.2hip.net> <1246544129.1855.40.camel@balrog.2hip.net> Message-ID: <4A4E407B.4020401@web.de> > On Thu, 2009-07-02 at 09:08 -0500, Robert Noland wrote: >> On Thu, 2009-07-02 at 15:26 +0200, Christoph Brunner wrote: >>> Hi, >>> >>> i posted this some time ago already on freebsd-mobile, but got no >>> answer. Maybe it was the wrong list, so i will try it here. >>> >>> On a Dell Precision M2300 laptop i am trying FreeBSD 8.0-CURRENT i386. >>> It runs so long but i cannot get the touchpad to provide scrolling >>> (in X). >>> >>> The touchpad identifies as GlidePoint. >>> >>> # dmesg | grep psm >>> psm0: irq 12 on atkbdc0 >>> psm0: [GIANT-LOCKED] >>> psm0: [ITHREAD] >>> psm0: model GlidePoint, device ID 0 >>> >>> Setting VertEdgeScroll, VertScrollDelta, *Edge options in xorg.conf >>> i didn't have success. >>> >>> Does anybody have a working setup with Glidepoint and scrolling? How do >>> i get this to work? >> There has been some discussion of this on the Xorg lists with regard to >> Glidepoint. I'm not sure what the outcome was though. I'm reasonably >> confident that this is not a FreeBSD specific issue though. I'll try >> and check the latest status of the synaptics driver. > > It looks like this may be handled in git. Please see: > > X.Org Bug 21214 > http://bugs.freedesktop.org/show_bug.cgi?id=21214 It looks like this patch is already included in the current xf86-input-synaptics-1.1.2 (installed from port), isn't it? In /var/log/Xorg.0.log i found: (II) Synaptics touchpad driver version 1.1.2 (**) Option "Device" "/dev/psm0" Query no Synaptics: 000000 (--) Mouse0: no supported touchpad found (EE) Mouse0 Unable to query/initialize Synaptics hardware. (EE) PreInit failed for input device "Mouse0" (II) UnloadModule: "synaptics" I just have tried Xubuntu 9.04 livesystem, which includes xf86-input-synaptics-0.99.3. The touchpad is found by the driver and works _with_ scrolling by default. Here is the info (from Xubuntu): From /var/log/Xorg.0.log: (II) Synaptics touchpad driver version 0.99.3 (**) Option "Device" "/dev/input/event8" (II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127 (II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0 (II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle (II) ALPS touchpad detected: AlpsPS/2 ALPS GlidePoint. Applying customised settings... (--) AlpsPS/2 ALPS GlidePoint touchpad found (**) AlpsPS/2 ALPS GlidePoint: always reports core events (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD) (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1 (**) AlpsPS/2 ALPS GlidePoint: (accel) filter chain progression: 2.00 (**) AlpsPS/2 ALPS GlidePoint: (accel) filter stage 0: 20.00 ms (**) AlpsPS/2 ALPS GlidePoint: (accel) set acceleration profile 0 (--) AlpsPS/2 ALPS GlidePoint touchpad found From /proc/bus/input/devices: I: Bus=0011 Vendor=0002 Product=0008 Version=6337 N: Name="AlpsPS/2 ALPS GlidePoint" P: Phys=isa0060/serio1/input0 S: Sysfs=/devices/platform/i8042/serio1/input/input8 U: Uniq= H: Handlers=mouse2 event8 B: EV=f B: KEY=420 0 70000 0 0 0 0 0 0 0 0 B: REL=3 B: ABS=1000003 Hmm. Any chance to get this working on FreeBSD, too? Chris > robert. > >> robert. >> >>> Thank you in advance. >>> >>> Best regards, >>> Chris >>> _______________________________________________ >>> freebsd-x11@freebsd.org mailing list >>> http://lists.freebsd.org/mailman/listinfo/freebsd-x11 >>> To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" From onemda at gmail.com Fri Jul 3 19:02:21 2009 From: onemda at gmail.com (Paul B. Mahol) Date: Fri Jul 3 19:02:27 2009 Subject: Glidepoint + Scrolling In-Reply-To: <4A4E407B.4020401@web.de> References: <4A4CB59A.5000801@web.de> <1246543693.1855.38.camel@balrog.2hip.net> <1246544129.1855.40.camel@balrog.2hip.net> <4A4E407B.4020401@web.de> Message-ID: <3a142e750907031202m3d689df5r64c9cea508159211@mail.gmail.com> On 7/3/09, Christoph Brunner wrote: >> On Thu, 2009-07-02 at 09:08 -0500, Robert Noland wrote: >>> On Thu, 2009-07-02 at 15:26 +0200, Christoph Brunner wrote: >>>> Hi, >>>> >>>> i posted this some time ago already on freebsd-mobile, but got no >>>> answer. Maybe it was the wrong list, so i will try it here. >>>> >>>> On a Dell Precision M2300 laptop i am trying FreeBSD 8.0-CURRENT i386. >>>> It runs so long but i cannot get the touchpad to provide scrolling >>>> (in X). >>>> >>>> The touchpad identifies as GlidePoint. >>>> >>>> # dmesg | grep psm >>>> psm0: irq 12 on atkbdc0 >>>> psm0: [GIANT-LOCKED] >>>> psm0: [ITHREAD] >>>> psm0: model GlidePoint, device ID 0 >>>> >>>> Setting VertEdgeScroll, VertScrollDelta, *Edge options in xorg.conf >>>> i didn't have success. >>>> >>>> Does anybody have a working setup with Glidepoint and scrolling? How do >>>> i get this to work? >>> There has been some discussion of this on the Xorg lists with regard to >>> Glidepoint. I'm not sure what the outcome was though. I'm reasonably >>> confident that this is not a FreeBSD specific issue though. I'll try >>> and check the latest status of the synaptics driver. >> >> It looks like this may be handled in git. Please see: >> >> X.Org Bug 21214 >> http://bugs.freedesktop.org/show_bug.cgi?id=21214 > > It looks like this patch is already included in the current > xf86-input-synaptics-1.1.2 (installed from port), isn't it? > > > In /var/log/Xorg.0.log i found: > > (II) Synaptics touchpad driver version 1.1.2 > (**) Option "Device" "/dev/psm0" > Query no Synaptics: 000000 > (--) Mouse0: no supported touchpad found > (EE) Mouse0 Unable to query/initialize Synaptics hardware. > (EE) PreInit failed for input device "Mouse0" > (II) UnloadModule: "synaptics" Your xorg.conf please. Do you have hint.psm.synaptics_support=1 ? -- Paul From ch.brunner at web.de Fri Jul 3 19:49:54 2009 From: ch.brunner at web.de (Christoph Brunner) Date: Fri Jul 3 19:50:02 2009 Subject: Glidepoint + Scrolling In-Reply-To: <3a142e750907031202m3d689df5r64c9cea508159211@mail.gmail.com> References: <4A4CB59A.5000801@web.de> <1246543693.1855.38.camel@balrog.2hip.net> <1246544129.1855.40.camel@balrog.2hip.net> <4A4E407B.4020401@web.de> <3a142e750907031202m3d689df5r64c9cea508159211@mail.gmail.com> Message-ID: <4A4E60DA.6040206@web.de> Paul B. Mahol schrieb: > On 7/3/09, Christoph Brunner wrote: >>> On Thu, 2009-07-02 at 09:08 -0500, Robert Noland wrote: >>>> On Thu, 2009-07-02 at 15:26 +0200, Christoph Brunner wrote: >>>>> Hi, >>>>> >>>>> i posted this some time ago already on freebsd-mobile, but got no >>>>> answer. Maybe it was the wrong list, so i will try it here. >>>>> >>>>> On a Dell Precision M2300 laptop i am trying FreeBSD 8.0-CURRENT i386. >>>>> It runs so long but i cannot get the touchpad to provide scrolling >>>>> (in X). >>>>> >>>>> The touchpad identifies as GlidePoint. >>>>> >>>>> # dmesg | grep psm >>>>> psm0: irq 12 on atkbdc0 >>>>> psm0: [GIANT-LOCKED] >>>>> psm0: [ITHREAD] >>>>> psm0: model GlidePoint, device ID 0 >>>>> >>>>> Setting VertEdgeScroll, VertScrollDelta, *Edge options in xorg.conf >>>>> i didn't have success. >>>>> >>>>> Does anybody have a working setup with Glidepoint and scrolling? How do >>>>> i get this to work? >>>> There has been some discussion of this on the Xorg lists with regard to >>>> Glidepoint. I'm not sure what the outcome was though. I'm reasonably >>>> confident that this is not a FreeBSD specific issue though. I'll try >>>> and check the latest status of the synaptics driver. >>> It looks like this may be handled in git. Please see: >>> >>> X.Org Bug 21214 >>> http://bugs.freedesktop.org/show_bug.cgi?id=21214 >> It looks like this patch is already included in the current >> xf86-input-synaptics-1.1.2 (installed from port), isn't it? >> >> >> In /var/log/Xorg.0.log i found: >> >> (II) Synaptics touchpad driver version 1.1.2 >> (**) Option "Device" "/dev/psm0" >> Query no Synaptics: 000000 >> (--) Mouse0: no supported touchpad found >> (EE) Mouse0 Unable to query/initialize Synaptics hardware. >> (EE) PreInit failed for input device "Mouse0" >> (II) UnloadModule: "synaptics" > > Your xorg.conf please. > Do you have hint.psm.synaptics_support=1 ? > I tried hint.psm.synaptics_support=1 but did not have success (with xorg driver "mouse", as stated on http://wiki.freebsd.org/SynapticsTouchpad). I didn't get any sysctl's containing "synaptics". My current xorg.conf: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "ServerFlags" Option "AutoAddDevices" "off" Option "AllowEmptyInput" "false" EndSection Section "Files" ModulePath "/usr/local/lib/xorg/modules" FontPath "/usr/local/lib/X11/fonts/misc/" FontPath "/usr/local/lib/X11/fonts/TTF/" FontPath "/usr/local/lib/X11/fonts/OTF" FontPath "/usr/local/lib/X11/fonts/Type1/" FontPath "/usr/local/lib/X11/fonts/100dpi/" FontPath "/usr/local/lib/X11/fonts/75dpi/" EndSection Section "Module" Load "extmod" Load "record" Load "dbe" Load "glx" Load "synaptics" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "synaptics" Option "Protocol" "auto" Option "Device" "/dev/psm0" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "nvidia" VendorName "nVidia Corporation" BoardName "Quadro FX 360M" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1440x900" EndSubSection EndSection From onemda at gmail.com Fri Jul 3 20:24:29 2009 From: onemda at gmail.com (Paul B. Mahol) Date: Fri Jul 3 20:24:35 2009 Subject: Glidepoint + Scrolling In-Reply-To: <4A4E60DA.6040206@web.de> References: <4A4CB59A.5000801@web.de> <1246543693.1855.38.camel@balrog.2hip.net> <1246544129.1855.40.camel@balrog.2hip.net> <4A4E407B.4020401@web.de> <3a142e750907031202m3d689df5r64c9cea508159211@mail.gmail.com> <4A4E60DA.6040206@web.de> Message-ID: <3a142e750907031324h354dc87vea71dae1cbaa58c1@mail.gmail.com> On 7/3/09, Christoph Brunner wrote: > Paul B. Mahol schrieb: >> On 7/3/09, Christoph Brunner wrote: >>>> On Thu, 2009-07-02 at 09:08 -0500, Robert Noland wrote: >>>>> On Thu, 2009-07-02 at 15:26 +0200, Christoph Brunner wrote: >>>>>> Hi, >>>>>> >>>>>> i posted this some time ago already on freebsd-mobile, but got no >>>>>> answer. Maybe it was the wrong list, so i will try it here. >>>>>> >>>>>> On a Dell Precision M2300 laptop i am trying FreeBSD 8.0-CURRENT i386. >>>>>> It runs so long but i cannot get the touchpad to provide scrolling >>>>>> (in X). >>>>>> >>>>>> The touchpad identifies as GlidePoint. >>>>>> >>>>>> # dmesg | grep psm >>>>>> psm0: irq 12 on atkbdc0 >>>>>> psm0: [GIANT-LOCKED] >>>>>> psm0: [ITHREAD] >>>>>> psm0: model GlidePoint, device ID 0 >>>>>> >>>>>> Setting VertEdgeScroll, VertScrollDelta, *Edge options in xorg.conf >>>>>> i didn't have success. >>>>>> >>>>>> Does anybody have a working setup with Glidepoint and scrolling? How >>>>>> do >>>>>> i get this to work? >>>>> There has been some discussion of this on the Xorg lists with regard to >>>>> Glidepoint. I'm not sure what the outcome was though. I'm reasonably >>>>> confident that this is not a FreeBSD specific issue though. I'll try >>>>> and check the latest status of the synaptics driver. >>>> It looks like this may be handled in git. Please see: >>>> >>>> X.Org Bug 21214 >>>> http://bugs.freedesktop.org/show_bug.cgi?id=21214 >>> It looks like this patch is already included in the current >>> xf86-input-synaptics-1.1.2 (installed from port), isn't it? >>> >>> >>> In /var/log/Xorg.0.log i found: >>> >>> (II) Synaptics touchpad driver version 1.1.2 >>> (**) Option "Device" "/dev/psm0" >>> Query no Synaptics: 000000 >>> (--) Mouse0: no supported touchpad found >>> (EE) Mouse0 Unable to query/initialize Synaptics hardware. >>> (EE) PreInit failed for input device "Mouse0" >>> (II) UnloadModule: "synaptics" >> >> Your xorg.conf please. >> Do you have hint.psm.synaptics_support=1 ? >> > > I tried hint.psm.synaptics_support=1 but did not have success (with xorg Just to make sure: you rebooted after changing /boot/loader.conf? > driver "mouse", as stated on http://wiki.freebsd.org/SynapticsTouchpad). > I didn't get any sysctl's containing "synaptics". Is moused disabled? Try with synaptics driver too? -- Paul From rnoland at FreeBSD.org Fri Jul 3 20:32:01 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Fri Jul 3 20:32:08 2009 Subject: Glidepoint + Scrolling In-Reply-To: <4A4E60DA.6040206@web.de> References: <4A4CB59A.5000801@web.de> <1246543693.1855.38.camel@balrog.2hip.net> <1246544129.1855.40.camel@balrog.2hip.net> <4A4E407B.4020401@web.de> <3a142e750907031202m3d689df5r64c9cea508159211@mail.gmail.com> <4A4E60DA.6040206@web.de> Message-ID: <1246653113.1855.70.camel@balrog.2hip.net> On Fri, 2009-07-03 at 21:49 +0200, Christoph Brunner wrote: > Option "Protocol" "auto" Protocol needs to be set to alps for Glidepoint. Option "Protocol" "alps" robert. -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090703/bb0c6507/attachment.pgp From joe at snikeris.com Fri Jul 3 20:54:44 2009 From: joe at snikeris.com (Joe Snikeris) Date: Fri Jul 3 20:54:51 2009 Subject: xorg catching signal 11 after switching from virtual console or resume from suspend Message-ID: <20b8a1c50907031325g327269a4r4f8117a0c3792348@mail.gmail.com> Hi all, I'm using 7.2-RELEASE, intel(4), and xorg-7.4_1. After switching back to x from a virtual console, it catches signal 11 and closes. This also occurs after resuming from suspend-to-RAM. I've appended Xorg.0.log, the output from pciconf -lv, and my xorg.conf. How do I proceed from here in order to resolve this issue? Thanks in advance, Joe --- X.Org X Server 1.6.0 Release Date: 2009-2-25 X Protocol Version 11, Revision 0 Build Operating System: FreeBSD 7.2-PRERELEASE i386 Current Operating System: FreeBSD sussman.home 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009 root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 Build Date: 22 April 2009 02:40:51PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 3 15:19:04 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "X.org Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (==) Automatically adding devices (==) Automatically enabling devices (**) FontPath set to: /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/, /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/, built-ins (**) ModulePath set to "/usr/local/lib/xorg/modules" (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Mouse0 (WW) Disabling Keyboard0 (II) Loader magic: 0x6a0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on freebsd (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe0000000/134217728, 0xd0000000/524288, I/O @ 0x00001800/8, BIOS @ 0x????????/65536 (--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/134217728, 0xd0080000/524288 (II) System resource ranges: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) "dri2" will be loaded. This was enabled by default and also specified in the config file. (II) LoadModule: "dbe" (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "dri" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "dri2" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "extmod" (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX disabled (II) Loading extension GLX (II) LoadModule: "record" (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "intel" (II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.6.3 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel?? GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) resource ranges after probing: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/local/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.0, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (II) intel(0): Integrated Graphics Chipset: Intel(R) 855GME (--) intel(0): Chipset: "852GM/855GM" (--) intel(0): Linear framebuffer at 0xE0000000 (--) intel(0): IO registers at addr 0xD0000000 (==) intel(0): Using EXA for acceleration (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section Monitor0 (II) intel(0): Output LVDS has no monitor section (II) intel(0): I2C bus "LVDSDDC_C" initialized. (II) intel(0): Attempting to determine panel fixed mode. (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. (II) intel(0): I2C bus "DVODDC_D" initialized. (II) Loading sub module "sil164" (II) LoadModule: "sil164" (II) Loading /usr/local/lib/xorg/modules/drivers//sil164.so (II) Module sil164: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): I2C bus "DVOI2C_E" initialized. (II) Loading sub module "ch7xxx" (II) LoadModule: "ch7xxx" (II) Loading /usr/local/lib/xorg/modules/drivers//ch7xxx.so (II) Module ch7xxx: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): I2C bus "DVOI2C_E" removed. (II) intel(0): I2C bus "DVOI2C_E" initialized. (II) Loading sub module "ivch" (II) LoadModule: "ivch" (II) Loading /usr/local/lib/xorg/modules/drivers//ivch.so (II) Module ivch: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): I2C bus "DVOI2C_E" removed. (II) intel(0): I2C bus "DVOI2C_B" initialized. (II) Loading sub module "tfp410" (II) LoadModule: "tfp410" (II) Loading /usr/local/lib/xorg/modules/drivers//tfp410.so (II) Module tfp410: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): I2C bus "DVOI2C_B" removed. (II) intel(0): I2C bus "DVOI2C_E" initialized. (II) Loading sub module "ch7017" (II) LoadModule: "ch7017" (II) Loading /usr/local/lib/xorg/modules/drivers//ch7017.so (II) Module ch7017: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): I2C bus "DVOI2C_E" removed. (II) intel(0): I2C bus "DVOI2C_E" initialized. (II) intel(0): I2C bus "DVOI2C_E" removed. (II) intel(0): I2C bus "DVODDC_D" removed. (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): Resizable framebuffer: not available (1 3) (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): Output VGA disconnected (II) intel(0): Output LVDS connected (II) intel(0): Using exact sizes for initial modes (II) intel(0): Output LVDS using initial mode 1024x768 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): detected 128 kB GTT. (II) intel(0): detected 8060 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (==) intel(0): Will not try to enable page flipping (==) intel(0): Triple buffering disabled (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/local/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/local/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.6.0, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Comparing regs from server start up to After PreInit (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009 (WW) intel(0): PP_STATUS before: on, ready, sequencing idle (WW) intel(0): PP_STATUS after: on, ready, sequencing on (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 491520 total, 0 used (II) intel(0): I830CheckAvailableMemory: 1966080 kB available (WW) intel(0): DRI2 requires UXA drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] DRM interface version 1.2 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x10 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression enabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 131072 KB (II) intel(0): Attempting memory allocation with tiled buffers. (WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed (Cannot allocate memory) (WW) intel(0): xf86AllocateGARTMemory: allocation of 4 pages failed (Cannot allocate memory) (WW) intel(0): Disabling HW cursor because the cursor memory allocation failed. (II) intel(0): Tiled allocation successful. (--) intel(0): DRI is disabled because it needs HW cursor, 2D accel and AGPGART. (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression (II) intel(0): Page Flipping disabled (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) EXA(0): Offscreen pixmap area of 12582912 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing SW Cursor! (II) intel(0): xf86BindGARTMemory: bind key 141 at 0x007df000 (pgoffset 2015) (II) intel(0): xf86BindGARTMemory: bind key 142 at 0x00ddf000 (pgoffset 3551) (II) intel(0): xf86BindGARTMemory: bind key 143 at 0x00de0000 (pgoffset 3552) (II) intel(0): xf86BindGARTMemory: bind key 144 at 0x00de1000 (pgoffset 3553) (II) intel(0): xf86BindGARTMemory: bind key 145 at 0x01000000 (pgoffset 4096) (II) intel(0): xf86BindGARTMemory: bind key 146 at 0x01400000 (pgoffset 5120) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x0011ffff: fake bufmgr (1024 kB) (II) intel(0): 0x007df000: end of stolen memory (II) intel(0): 0x007df000-0x00ddefff: compressed frame buffer (6144 kB, 0x000000003b400000 physical ) (II) intel(0): 0x00ddf000-0x00ddffff: compressed ll buffer (4 kB, 0x00000000179d7000 physical ) (II) intel(0): 0x00de0000-0x00de0fff: Core cursor (4 kB, 0x00000000458da000 physical ) (II) intel(0): 0x00de1000-0x00de1fff: overlay registers (4 kB, 0x00000000486fc000 physical ) (II) intel(0): 0x01000000-0x013fffff: front buffer (4096 kB) (II) intel(0): 0x01400000-0x01ffffff: exa offscreen (12288 kB) (II) intel(0): 0x08000000: end of aperture (II) intel(0): using SSC reference clock of 66 MHz (WW) intel(0): Chosen PLL clock of 49.9 Mhz more than 2% away from desired 54.2 Mhz (II) intel(0): Selecting standard 18 bit TMDS pixel format. (II) intel(0): Output configuration: (II) intel(0): Pipe A is off (II) intel(0): Display plane B is now disabled and connected to pipe A. (WW) intel(0): Hardware claims pipe A is on while software believes it is off (II) intel(0): Pipe B is on (II) intel(0): Display plane A is now enabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output LVDS is connected to pipe B (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (II) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up overlay video (II) intel(0): direct rendering: Failed (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) intel(0): Setting screen physical size to 270 x 203 (II) config/hal: Adding input device AT Keyboard (II) LoadModule: "kbd" (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) AT Keyboard: always reports core events (**) Option "Protocol" "standard" (**) AT Keyboard: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) AT Keyboard: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) AT Keyboard: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) AT Keyboard: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) AT Keyboard: CustomKeycodes disabled (II) XINPUT: Adding extended input device "AT Keyboard" (type: KEYBOARD) (II) config/hal: Adding input device PS/2 Mouse (II) LoadModule: "mouse" (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.6.0, module version = 1.4.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) PS/2 Mouse: Device: "/dev/sysmouse" (==) PS/2 Mouse: Protocol: "Auto" (**) PS/2 Mouse: always reports core events (**) Option "Device" "/dev/sysmouse" (==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5 (**) PS/2 Mouse: Buttons: 9 (**) PS/2 Mouse: Sensitivity: 1 (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE) (**) PS/2 Mouse: (accel) keeping acceleration scheme 1 (**) PS/2 Mouse: (accel) filter chain progression: 2.00 (**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms (**) PS/2 Mouse: (accel) set acceleration profile 0 (II) PS/2 Mouse: SetupAuto: hw.iftype is 4, hw.model is 0 (II) PS/2 Mouse: SetupAuto: protocol is SysMouse (II) intel(0): xf86UnbindGARTMemory: unbind key 141 (II) intel(0): xf86UnbindGARTMemory: unbind key 142 (II) intel(0): xf86UnbindGARTMemory: unbind key 143 (II) intel(0): xf86UnbindGARTMemory: unbind key 144 (II) intel(0): xf86UnbindGARTMemory: unbind key 145 (II) intel(0): xf86UnbindGARTMemory: unbind key 146 (II) intel(0): xf86BindGARTMemory: bind key 141 at 0x007df000 (pgoffset 2015) (II) intel(0): xf86BindGARTMemory: bind key 142 at 0x00ddf000 (pgoffset 3551) (II) intel(0): xf86BindGARTMemory: bind key 143 at 0x00de0000 (pgoffset 3552) (II) intel(0): xf86BindGARTMemory: bind key 144 at 0x00de1000 (pgoffset 3553) (II) intel(0): xf86BindGARTMemory: bind key 145 at 0x01000000 (pgoffset 4096) (II) intel(0): xf86BindGARTMemory: bind key 146 at 0x01400000 (pgoffset 5120) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x0011ffff: fake bufmgr (1024 kB) (II) intel(0): 0x007df000: end of stolen memory (II) intel(0): 0x007df000-0x00ddefff: compressed frame buffer (6144 kB, 0x000000003b400000 physical ) (II) intel(0): 0x00ddf000-0x00ddffff: compressed ll buffer (4 kB, 0x00000000179d7000 physical ) (II) intel(0): 0x00de0000-0x00de0fff: Core cursor (4 kB, 0x00000000458da000 physical ) (II) intel(0): 0x00de1000-0x00de1fff: overlay registers (4 kB, 0x00000000486fc000 physical ) (II) intel(0): 0x01000000-0x013fffff: front buffer (4096 kB) (II) intel(0): 0x01400000-0x01ffffff: exa offscreen (12288 kB) (II) intel(0): 0x08000000: end of aperture (II) intel(0): using SSC reference clock of 66 MHz (WW) intel(0): Chosen PLL clock of 49.9 Mhz more than 2% away from desired 54.2 Mhz (II) intel(0): Selecting standard 18 bit TMDS pixel format. Fatal server error: Caught signal 11. Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. (II) UnloadModule: "mouse" (II) UnloadModule: "kbd" (II) intel(0): xf86UnbindGARTMemory: unbind key 141 (II) intel(0): xf86UnbindGARTMemory: unbind key 142 (II) intel(0): xf86UnbindGARTMemory: unbind key 143 (II) intel(0): xf86UnbindGARTMemory: unbind key 144 (II) intel(0): xf86UnbindGARTMemory: unbind key 145 (II) intel(0): xf86UnbindGARTMemory: unbind key 146 --- hostb0@pci0:0:0:0: class=0x060000 card=0x055c1014 chip=0x35808086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara Host-Hub Interface Bridge' class = bridge subclass = HOST-PCI none0@pci0:0:0:1: class=0x088000 card=0x055d1014 chip=0x35848086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara System Memory Controller' class = base peripheral none1@pci0:0:0:3: class=0x088000 card=0x055e1014 chip=0x35858086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara Configuration Process' class = base peripheral vgapci0@pci0:0:2:0: class=0x030000 card=0x05571014 chip=0x35828086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated Graphics Device' class = display subclass = VGA vgapci1@pci0:0:2:1: class=0x038000 card=0x05571014 chip=0x35828086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated Graphics Device' class = display uhci0@pci0:0:29:0: class=0x0c0300 card=0x052d1014 chip=0x24c28086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller' class = serial bus subclass = USB uhci1@pci0:0:29:1: class=0x0c0300 card=0x052d1014 chip=0x24c48086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller' class = serial bus subclass = USB uhci2@pci0:0:29:2: class=0x0c0300 card=0x052d1014 chip=0x24c78086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller' class = serial bus subclass = USB ehci0@pci0:0:29:7: class=0x0c0320 card=0x052e1014 chip=0x24cd8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI Controller' class = serial bus subclass = USB pcib1@pci0:0:30:0: class=0x060400 card=0x00000000 chip=0x24488086 rev=0x81 hdr=0x01 vendor = 'Intel Corporation' device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x24cc8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DBM (ICH4-M) LPC Interface Bridge' class = bridge subclass = PCI-ISA atapci0@pci0:0:31:1: class=0x01018a card=0x052d1014 chip=0x24ca8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller' class = mass storage subclass = ATA none2@pci0:0:31:3: class=0x0c0500 card=0x052d1014 chip=0x24c38086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller' class = serial bus subclass = SMBus pcm0@pci0:0:31:5: class=0x040100 card=0x05581014 chip=0x24c58086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller' class = multimedia subclass = audio none3@pci0:0:31:6: class=0x070300 card=0x05591014 chip=0x24c68086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller' class = simple comms subclass = generic modem cbb0@pci0:2:0:0: class=0x060700 card=0x05551014 chip=0x04761180 rev=0x8d hdr=0x02 vendor = 'Ricoh Company, Ltd.' device = 'unknown Ricoh R/RL/5C476(II)' class = bridge subclass = PCI-CardBus none4@pci0:2:0:1: class=0x080500 card=0x05561014 chip=0x08221180 rev=0x13 hdr=0x00 vendor = 'Ricoh Company, Ltd.' device = 'R5C832, R5C843 SDA Standard Compliant SD Host Controller' class = base peripheral subclass = SD host controller em0@pci0:2:1:0: class=0x020000 card=0x055b1014 chip=0x10778086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82547EI Gigabit Ethernet Controller (Mobile)' class = network subclass = ethernet iwi0@pci0:2:2:0: class=0x028000 card=0x27118086 chip=0x42208086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = 'MPCI3B driverIntel PRO/Wireless 2200BG' class = network --- Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/local/lib/xorg/modules" FontPath "/usr/local/lib/X11/fonts/misc/" FontPath "/usr/local/lib/X11/fonts/TTF/" FontPath "/usr/local/lib/X11/fonts/OTF" FontPath "/usr/local/lib/X11/fonts/Type1/" FontPath "/usr/local/lib/X11/fonts/100dpi/" FontPath "/usr/local/lib/X11/fonts/75dpi/" EndSection Section "Module" Load "dbe" Load "dri" Load "dri2" Load "extmod" Load "glx" Load "record" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/sysmouse" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "intel" VendorName "Intel Corporation" BoardName "82852/855GM Integrated Graphics Device" BusID "PCI:0:2:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection From aragon at phat.za.net Fri Jul 3 21:18:02 2009 From: aragon at phat.za.net (Aragon Gouveia) Date: Fri Jul 3 21:18:08 2009 Subject: Some issues with video-intel-2.7.1 In-Reply-To: <1246454921.1855.27.camel@balrog.2hip.net> References: <4A4B301F.4050700@phat.za.net> <4A4B3089.5090706@phat.za.net> <1246454921.1855.27.camel@balrog.2hip.net> Message-ID: <4A4E7583.1070809@phat.za.net> Robert Noland wrote: > -CURRENT should resolve most of your issues. The problem is with our > handling of msi interrupts in the pci code. A few people are reporting > panics with HEAD that haven't yet been resolved. I let X autoload the > kernel modules and I haven't seen any issues with the G45 board that I > use for my Intel work. I updated to HEAD the other night and it fixed the biggest problem (along with some other unrelated problems), thanks! The problem with exiting my window manager still persists, though. When it exits, I've noticed Xorg persistently core dumps (bus error), and when that happens the vty is filled with horizontal stripes as if the LCD panel has a bad connection. Only fix is a reboot. Only work around is ctrl+alt+backspace. Not sure if this is a Xorg problem, but if I can help with information, please ask. :) Thanks, Aragon From ch.brunner at web.de Fri Jul 3 22:16:52 2009 From: ch.brunner at web.de (Christoph Brunner) Date: Fri Jul 3 22:17:00 2009 Subject: Glidepoint + Scrolling In-Reply-To: <1246653113.1855.70.camel@balrog.2hip.net> References: <4A4CB59A.5000801@web.de> <1246543693.1855.38.camel@balrog.2hip.net> <1246544129.1855.40.camel@balrog.2hip.net> <4A4E407B.4020401@web.de> <3a142e750907031202m3d689df5r64c9cea508159211@mail.gmail.com> <4A4E60DA.6040206@web.de> <1246653113.1855.70.camel@balrog.2hip.net> Message-ID: <4A4E8349.20602@web.de> > On Fri, 2009-07-03 at 21:49 +0200, Christoph Brunner wrote: >> Option "Protocol" "auto" > > Protocol needs to be set to alps for Glidepoint. > Option "Protocol" "alps" > > robert. > > Ahh, ok - the touchpad is now handled by the synaptics driver, thanks. Scrolling doesn't work anyway, nor after playing with the *Edge values. # synclient -l Parameter settings: LeftEdge = 80 RightEdge = 880 TopEdge = 150 BottomEdge = 630 FingerLow = 3 FingerHigh = 20 FingerPress = 256 MaxTapTime = 180 MaxTapMove = 220 MaxDoubleTapTime = 180 SingleTapTimeout = 180 ClickTime = 100 FastTaps = 0 EmulateMidButtonTime = 75 EmulateTwoFingerMinZ = 257 EmulateTwoFingerMinW = 7 VertScrollDelta = 20 HorizScrollDelta = 100 VertEdgeScroll = 1 HorizEdgeScroll = 0 CornerCoasting = 0 VertTwoFingerScroll = 1 HorizTwoFingerScroll = 1 MinSpeed = 0.4 MaxSpeed = 0.7 AccelFactor = 0.01 TrackstickSpeed = 40 EdgeMotionMinZ = 30 EdgeMotionMaxZ = 160 EdgeMotionMinSpeed = 1 EdgeMotionMaxSpeed = 400 EdgeMotionUseAlways = 0 UpDownScrolling = 1 LeftRightScrolling = 1 UpDownScrollRepeat = 1 LeftRightScrollRepeat = 1 ScrollButtonRepeat = 100 TouchpadOff = 0 GuestMouseOff = 0 LockedDrags = 0 LockedDragTimeout = 5000 RTCornerButton = 0 RBCornerButton = 0 LTCornerButton = 0 LBCornerButton = 0 TapButton1 = 1 TapButton2 = 3 TapButton3 = 2 ClickFinger1 = 1 ClickFinger2 = 3 ClickFinger3 = 2 CircularScrolling = 0 CircScrollDelta = 0.1 CircScrollTrigger = 0 CircularPad = 0 PalmDetect = 0 PalmMinWidth = 10 PalmMinZ = 200 CoastingSpeed = 0 PressureMotionMinZ = 30 PressureMotionMaxZ = 160 PressureMotionMinFactor = 1 PressureMotionMaxFactor = 1 GrabEventDevice = 1 Chris From rnoland at FreeBSD.org Sat Jul 4 06:18:45 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Sat Jul 4 06:18:51 2009 Subject: Some issues with video-intel-2.7.1 In-Reply-To: <4A4E7583.1070809@phat.za.net> References: <4A4B301F.4050700@phat.za.net> <4A4B3089.5090706@phat.za.net> <1246454921.1855.27.camel@balrog.2hip.net> <4A4E7583.1070809@phat.za.net> Message-ID: <1246688316.1855.72.camel@balrog.2hip.net> On Fri, 2009-07-03 at 23:17 +0200, Aragon Gouveia wrote: > Robert Noland wrote: > > -CURRENT should resolve most of your issues. The problem is with our > > handling of msi interrupts in the pci code. A few people are reporting > > panics with HEAD that haven't yet been resolved. I let X autoload the > > kernel modules and I haven't seen any issues with the G45 board that I > > use for my Intel work. > > I updated to HEAD the other night and it fixed the biggest problem > (along with some other unrelated problems), thanks! > > The problem with exiting my window manager still persists, though. When > it exits, I've noticed Xorg persistently core dumps (bus error), and > when that happens the vty is filled with horizontal stripes as if the > LCD panel has a bad connection. Only fix is a reboot. Only work around > is ctrl+alt+backspace. What chip is this on? Can you get a backtrace? robert. > Not sure if this is a Xorg problem, but if I can help with information, > please ask. :) > > > Thanks, > Aragon > -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090704/55ab8b3b/attachment.pgp From rnoland at FreeBSD.org Sat Jul 4 06:30:24 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Sat Jul 4 06:30:31 2009 Subject: Glidepoint + Scrolling In-Reply-To: <4A4E8349.20602@web.de> References: <4A4CB59A.5000801@web.de> <1246543693.1855.38.camel@balrog.2hip.net> <1246544129.1855.40.camel@balrog.2hip.net> <4A4E407B.4020401@web.de> <3a142e750907031202m3d689df5r64c9cea508159211@mail.gmail.com> <4A4E60DA.6040206@web.de> <1246653113.1855.70.camel@balrog.2hip.net> <4A4E8349.20602@web.de> Message-ID: <1246689009.1855.75.camel@balrog.2hip.net> On Sat, 2009-07-04 at 00:16 +0200, Christoph Brunner wrote: > > On Fri, 2009-07-03 at 21:49 +0200, Christoph Brunner wrote: > >> Option "Protocol" "auto" > > > > Protocol needs to be set to alps for Glidepoint. > > Option "Protocol" "alps" > > > > robert. > > > > > > Ahh, ok - the touchpad is now handled by the synaptics driver, thanks. > Scrolling doesn't work anyway, nor after playing with the *Edge values. My input driver foo is weak... I never got edge scrolling working with the GlidePoint when I had one. I didn't think that commit had been rolled into a release yet, but possibly it was. robert. > # synclient -l > Parameter settings: > LeftEdge = 80 > RightEdge = 880 > TopEdge = 150 > BottomEdge = 630 > FingerLow = 3 > FingerHigh = 20 > FingerPress = 256 > MaxTapTime = 180 > MaxTapMove = 220 > MaxDoubleTapTime = 180 > SingleTapTimeout = 180 > ClickTime = 100 > FastTaps = 0 > EmulateMidButtonTime = 75 > EmulateTwoFingerMinZ = 257 > EmulateTwoFingerMinW = 7 > VertScrollDelta = 20 > HorizScrollDelta = 100 > VertEdgeScroll = 1 > HorizEdgeScroll = 0 > CornerCoasting = 0 > VertTwoFingerScroll = 1 > HorizTwoFingerScroll = 1 > MinSpeed = 0.4 > MaxSpeed = 0.7 > AccelFactor = 0.01 > TrackstickSpeed = 40 > EdgeMotionMinZ = 30 > EdgeMotionMaxZ = 160 > EdgeMotionMinSpeed = 1 > EdgeMotionMaxSpeed = 400 > EdgeMotionUseAlways = 0 > UpDownScrolling = 1 > LeftRightScrolling = 1 > UpDownScrollRepeat = 1 > LeftRightScrollRepeat = 1 > ScrollButtonRepeat = 100 > TouchpadOff = 0 > GuestMouseOff = 0 > LockedDrags = 0 > LockedDragTimeout = 5000 > RTCornerButton = 0 > RBCornerButton = 0 > LTCornerButton = 0 > LBCornerButton = 0 > TapButton1 = 1 > TapButton2 = 3 > TapButton3 = 2 > ClickFinger1 = 1 > ClickFinger2 = 3 > ClickFinger3 = 2 > CircularScrolling = 0 > CircScrollDelta = 0.1 > CircScrollTrigger = 0 > CircularPad = 0 > PalmDetect = 0 > PalmMinWidth = 10 > PalmMinZ = 200 > CoastingSpeed = 0 > PressureMotionMinZ = 30 > PressureMotionMaxZ = 160 > PressureMotionMinFactor = 1 > PressureMotionMaxFactor = 1 > GrabEventDevice = 1 > > Chris > _______________________________________________ > freebsd-x11@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-x11 > To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090704/784e6152/attachment.pgp From aragon at phat.za.net Sat Jul 4 12:35:58 2009 From: aragon at phat.za.net (Aragon Gouveia) Date: Sat Jul 4 12:36:04 2009 Subject: Some issues with video-intel-2.7.1 In-Reply-To: <1246688316.1855.72.camel@balrog.2hip.net> References: <4A4B301F.4050700@phat.za.net> <4A4B3089.5090706@phat.za.net> <1246454921.1855.27.camel@balrog.2hip.net> <4A4E7583.1070809@phat.za.net> <1246688316.1855.72.camel@balrog.2hip.net> Message-ID: <4A4F4CA2.5070500@phat.za.net> Robert Noland wrote: >> The problem with exiting my window manager still persists, though. When >> it exits, I've noticed Xorg persistently core dumps (bus error), and >> when that happens the vty is filled with horizontal stripes as if the >> LCD panel has a bad connection. Only fix is a reboot. Only work around >> is ctrl+alt+backspace. > > What chip is this on? Can you get a backtrace? Intel 965GM Is the attached backtrace ok? Thanks, Aragon -------------- next part -------------- #0 0x000000000044efcd in DeliverEventsToWindow (pDev=0x801827000, pWin=0x812dec000, pEvents=0x7fffffffde60, count=1, filter=1048576, grab=0x0, mskidx=2) at events.c:1966 1966 if (filter != CantBeFiltered && [New Thread 8018f0700 (LWP 100104)] (gdb) bt #0 0x000000000044efcd in DeliverEventsToWindow (pDev=0x801827000, pWin=0x812dec000, pEvents=0x7fffffffde60, count=1, filter=1048576, grab=0x0, mskidx=2) at events.c:1966 #1 0x00000000005148a6 in SendEventToAllWindows (dev=0x801827000, mask=1048576, ev=0x7fffffffde60, count=1) at exevents.c:2087 #2 0x000000000051d892 in XIChangeDeviceProperty (dev=0x801827000, property=Variable "property" is not available.) at xiproperty.c:524 #3 0x000000000043de45 in DisableDevice (dev=0x801827000) at devices.c:412 #4 0x000000000043df3e in RemoveDevice (dev=0x801827000) at devices.c:976 #5 0x00000000004809fa in DeleteInputDeviceRequest (pDev=0x801827000) at xf86Xinput.c:669 #6 0x000000000043dc80 in CloseDownDevices () at devices.c:913 #7 0x00000000004da672 in AbortServer () at log.c:406 #8 0x00000000004dac41 in FatalError (f=Variable "f" is not available.) at log.c:532 #9 0x0000000000472e48 in xf86SigHandler (signo=25325568) at xf86Events.c:387 #10 #11 DeliverPropertyEvent (pWin=0x5a5a5a5a5a5a5a5a, value=0x7fffffffebb0) at rrproperty.c:34 #12 0x000000000042efa4 in TraverseTree (pWin=0x812dec000, func=0x4fc668 , data=0x7fffffffebb0) at window.c:234 #13 0x00000000004fc62d in RRDeleteAllOutputProperties (output=0x812cf0340) at rrproperty.c:81 #14 0x00000000004fb762 in RROutputDestroyResource (value=Variable "value" is not available.) at rroutput.c:414 #15 0x000000000042e68a in FreeClientResources (client=0x801814140) at resource.c:807 #16 0x000000000042e74f in FreeAllResources () at resource.c:824 #17 0x000000000042c656 in main (argc=6, argv=0x7fffffffed78, envp=Variable "envp" is not available.) at main.c:411 From fabio.montefuscolo at gmail.com Sat Jul 4 12:38:26 2009 From: fabio.montefuscolo at gmail.com (Fabio Montefuscolo) Date: Sat Jul 4 12:38:41 2009 Subject: Ports: Script "configure" failed unexpectedly. Message-ID: <18f808680907040515g78897219w137568f903923ef6@mail.gmail.com> Hi, I tried to install Lyx on PCBSD from ports tree, but the configure failed. The config.log is attached and the result for 'ls /var/db/pkg' is: aiksaurus-1.2.1_2 automake-wrapper-20071109 libsigsegv-2.5 python26-2.6.2 autoconf-2.62 boo./configure: 20764: Syntax error: word unexpected (expecting ")") The failure output is: ----------------------------------------------------------------------------------------------------------------------------------------------------------------- ===> Script "configure" failed unexpectedly. Please report the problem to x11@FreeBSD.org [maintainer] and attach the "/usr/ports/x11/libSM/work/libSM-1.1.0/config.log" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. an `ls /var/db/pkg`). *** Error code 1 Stop in /usr/ports/x11/libSM. *** Error code 1 Stop in /usr/ports/x11-toolkits/qt33. *** Error code 1 Stop in /usr/ports/x11-toolkits/qt33. *** Error code 1 Stop in /usr/ports/print/lyx. *** Error code 1 Stop in /usr/ports/print/lyx. st-1.37.0_1 libtool-1.5.26 xorg-macros-1.2.1 autoconf-wrapper-20071109 icu-3.8.1_2 m4-1.4.13,1 xproto-7.0.15 automake-1.10.1 libICE-1.0.4_1,1 perl-5.8.9_3 xtrans-1.2.3 ----------------------------------------------------------------------------------------------------------------------------------------------------------------- I'll keep trying ... :) Thanks, Fabio -------------- next part -------------- A non-text attachment was scrubbed... Name: config.log Type: application/octet-stream Size: 25533 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090704/edf42a3a/config.obj From kris at pcbsd.org Sat Jul 4 13:43:59 2009 From: kris at pcbsd.org (Kris Moore) Date: Sat Jul 4 13:44:05 2009 Subject: Ports: Script "configure" failed unexpectedly. In-Reply-To: <18f808680907040515g78897219w137568f903923ef6@mail.gmail.com> References: <18f808680907040515g78897219w137568f903923ef6@mail.gmail.com> Message-ID: On Sat, 4 Jul 2009, Fabio Montefuscolo wrote: > Hi, > > I tried to install Lyx on PCBSD from ports tree, but the configure > failed. > Please refer to the PC-BSD wiki page on this: http://wiki.pcbsd.org/index.php/PC-BSD_Users_Handbook#Switching_to_the_FreeBSD_LOCALBASE You must use the "runports" command to switch to the /usr/local LOCALBASE in PC-BSD 7.1. After you do so, your make's will run normally. -- Kris Moore PC-BSD Software From window at trtk.ru Sun Jul 5 10:27:48 2009 From: window at trtk.ru (Oleg Sidorkin) Date: Sun Jul 5 10:28:02 2009 Subject: xf86-video-intel on G33 display resolution issue Message-ID: <200907051408.14770.window@trtk.ru> Hello, I'm running RELENG_7 (amd64) on my desktop with Intel G33 videoadapter. I'm using xorg-7.4 and xf86-video-intel-2.7.1 built from ports. XOrg server is configured to use 1280x1024@75Hz video mode. When VESA driver is used everything is ok, but mode is limited by 1024x768@60Hz when I change driver to "intel". When intel driver is used the following string appears in the log: (EE) intel(0): Unknown EDID version 3 I tried to google the problem but I found nothing helpful. Is there anything I'm doing wrong? Logs and xrandr outputs for both cases are attached. Thanks in advance -------------- next part -------------- X.Org X Server 1.6.1 Release Date: 2009-4-14 X Protocol Version 11, Revision 0 Build Operating System: FreeBSD 7.2-PRERELEASE amd64 Current Operating System: FreeBSD window.trtk.ru 7.2-STABLE FreeBSD 7.2-STABLE #39: Thu Jun 18 16:07:09 MSD 2009 olsi@window.trtk.ru:/usr/obj/usr/src/sys/QUADKERNEL amd64 Build Date: 14 May 2009 01:43:54AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 5 11:54:22 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "My Monitor" (**) | |-->Device "intel" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "DontZap" "off" (==) Automatically adding devices (==) Automatically enabling devices (WW) `fonts.dir' not found (or not valid) in "/usr/local/share/fonts". Entry deleted from font path. (Run 'mkfontdir' on "/usr/local/share/fonts"). (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local"). (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts"). (**) FontPath set to: /usr/X11R6/lib/X11/fonts/cyrillic, /usr/X11R6/lib/X11/fonts/bitstream-vera, /usr/X11R6/lib/X11/fonts/winfonts, /usr/X11R6/lib/X11/fonts/misc, /usr/X11R6/lib/X11/fonts/75dpi:unscaled, /usr/X11R6/lib/X11/fonts/100dpi:unscaled, /usr/X11R6/lib/X11/fonts/Type1, /usr/local/share/fonts/override, /usr/X11R6/lib/X11/fonts/TTF, /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/, built-ins (==) ModulePath set to "/usr/local/lib/xorg/modules" (**) Extension "RENDER" is enabled (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Mouse1 (WW) Disabling Keyboard1 (II) Loader magic: 0x3d60 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on freebsd (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (--) PCI:*(0@0:2:0) Intel Corporation 82G33/G31 Express Integrated Graphics Controller rev 2, Mem @ 0xfe900000/524288, 0xd0000000/268435456, 0xfe800000/1048576, I/O @ 0x0000bc00/8, BIOS @ 0x????????/65536 (--) PCI: (0@0:2:1) Intel Corporation 82G33/G31 Express Integrated Graphics Controller rev 2, Mem @ 0xfe980000/524288 (II) System resource ranges: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) "dri2" will be loaded by default. (II) LoadModule: "dbe" (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX disabled (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "record" (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri2" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "intel" (II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so (II) Module intel: vendor="X.Org Foundation" compiled for 1.6.1, module version = 2.7.1 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, Mobile Intel?? GM45 Express Chipset, Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) resource ranges after probing: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/local/lib/xorg/modules//libvgahw.so (II) Module vgahw: vendor="X.Org Foundation" compiled for 1.6.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Module "ramdac" already built-in (II) intel(0): Creating default Display subsection in Screen section "Screen 1" for depth/fbbpp 24/32 (==) intel(0): Depth 24, (--) framebuffer bpp 32 (==) intel(0): RGB weight 888 (==) intel(0): Default visual is TrueColor (**) intel(0): Option "ModeDebug" "yes" (II) intel(0): Integrated Graphics Chipset: Intel(R) G33 (--) intel(0): Chipset: "G33" (--) intel(0): Linear framebuffer at 0xD0000000 (--) intel(0): IO registers at addr 0xFE900000 (==) intel(0): Using EXA for acceleration (II) intel(0): Hardware state on X startup: (II) intel(0): DumpRegsBegin (II) intel(0): CHDECMISC: 0x000000ac (XOR bank/rank, ch2 enh disabled, ch1 enh enabled, ch0 enh enabled, flex disabled, ep not present) (II) intel(0): C0DRB0: 0x00200010 (0x0010) (II) intel(0): C0DRB1: 0x00300020 (0x0020) (II) intel(0): C0DRB2: 0x00400030 (0x0030) (II) intel(0): C0DRB3: 0x86860040 (0x0040) (II) intel(0): C1DRB0: 0x00200010 (0x0010) (II) intel(0): C1DRB1: 0x00300020 (0x0020) (II) intel(0): C1DRB2: 0x00400030 (0x0030) (II) intel(0): C1DRB3: 0x86860040 (0x0040) (II) intel(0): C0DRA01: 0x86868686 (0x8686) (II) intel(0): C0DRA23: 0x00008686 (0x8686) (II) intel(0): C1DRA01: 0x86868686 (0x8686) (II) intel(0): C1DRA23: 0x00008686 (0x8686) (II) intel(0): VCLK_DIVISOR_VGA0: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6) (II) intel(0): VCLK_POST_DIV: 0x00020002 (vga0 p1 = 4, p2 = 2, vga1 p1 = 2, p2 = 2) (II) intel(0): DPLL_TEST: 0x00010001 () (II) intel(0): CACHE_MODE_0: 0x00006820 (II) intel(0): D_STATE: 0x00000000 (II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:) (II) intel(0): RENCLK_GATE_D1: 0x00000000 (II) intel(0): RENCLK_GATE_D2: 0x00000000 (II) intel(0): SDVOB: 0x80300084 (enabled, pipe A, stall disabled, detected) (II) intel(0): SDVOC: 0x00300000 (disabled, pipe A, stall disabled, not detected) (II) intel(0): SDVOUDI: 0x00000000 (II) intel(0): DSPARB: 0x00001d9c (II) intel(0): DSPFW1: 0x00000000 (II) intel(0): DSPFW2: 0x00000000 (II) intel(0): DSPFW3: 0x00000000 (II) intel(0): ADPA: 0x00008c18 (disabled, pipe A, +hsync, +vsync) (II) intel(0): LVDS: 0x00000000 (disabled, pipe A, 18 bit, 1 channel) (II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync) (II) intel(0): DVOB: 0x80300084 (enabled, pipe A, no stall, -hsync, -vsync) (II) intel(0): DVOC: 0x00300000 (disabled, pipe A, no stall, -hsync, -vsync) (II) intel(0): DVOA_SRCDIM: 0x00000000 (II) intel(0): DVOB_SRCDIM: 0x00000000 (II) intel(0): DVOC_SRCDIM: 0x00000000 (II) intel(0): PP_CONTROL: 0x00000000 (power target: off) (II) intel(0): PP_STATUS: 0x00000000 (off, not ready, sequencing idle) (II) intel(0): PP_ON_DELAYS: 0x00000000 (II) intel(0): PP_OFF_DELAYS: 0x00000000 (II) intel(0): PP_DIVISOR: 0x00000000 (II) intel(0): PFIT_CONTROL: 0x00000000 (II) intel(0): PFIT_PGM_RATIOS: 0x00000000 (II) intel(0): PORT_HOTPLUG_EN: 0x00000020 (II) intel(0): PORT_HOTPLUG_STAT: 0x00000000 (II) intel(0): DSPACNTR: 0x48000000 (disabled, pipe A) (II) intel(0): DSPASTRIDE: 0x00000280 (640 bytes) (II) intel(0): DSPAPOS: 0x00000000 (0, 0) (II) intel(0): DSPASIZE: 0x018f02cf (720, 400) (II) intel(0): DSPABASE: 0x00000000 (II) intel(0): DSPASURF: 0x00000000 (II) intel(0): DSPATILEOFF: 0x00000000 (II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide) (II) intel(0): PIPEASRC: 0x02cf018f (720, 400) (II) intel(0): PIPEASTAT: 0x80000203 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS) (II) intel(0): FPA0: 0x00031406 (n = 3, m1 = 20, m2 = 6) (II) intel(0): FPA1: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): DPLL_A: 0xc4020033 (enabled, dvo, VGA, default clock, DAC/serial mode, p1 = 2, p2 = 10, SDVO mult 4) (II) intel(0): DPLL_A_MD: 0x00000000 (II) intel(0): HTOTAL_A: 0x038302cf (720 active, 900 total) (II) intel(0): HBLANK_A: 0x038302cf (720 start, 900 end) (II) intel(0): HSYNC_A: 0x036802fc (765 start, 873 end) (II) intel(0): VTOTAL_A: 0x01c0018f (400 active, 449 total) (II) intel(0): VBLANK_A: 0x01c0018f (400 start, 449 end) (II) intel(0): VSYNC_A: 0x019d019b (412 start, 414 end) (II) intel(0): BCLRPAT_A: 0x00000000 (II) intel(0): VSYNCSHIFT_A: 0x00000000 (II) intel(0): DSPBCNTR: 0x01000000 (disabled, pipe B) (II) intel(0): DSPBSTRIDE: 0x00000000 (0 bytes) (II) intel(0): DSPBPOS: 0x00000000 (0, 0) (II) intel(0): DSPBSIZE: 0x00000000 (1, 1) (II) intel(0): DSPBBASE: 0x00000000 (II) intel(0): DSPBSURF: 0x00000000 (II) intel(0): DSPBTILEOFF: 0x00000000 (II) intel(0): PIPEBCONF: 0x00000000 (disabled, single-wide) (II) intel(0): PIPEBSRC: 0x027f01df (640, 480) (II) intel(0): PIPEBSTAT: 0x00000000 (status:) (II) intel(0): FPB0: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): FPB1: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): DPLL_B: 0x04800003 (disabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 8, p2 = 10, SDVO mult 1) (II) intel(0): DPLL_B_MD: 0x00000000 (II) intel(0): HTOTAL_B: 0x031f027f (640 active, 800 total) (II) intel(0): HBLANK_B: 0x03170287 (648 start, 792 end) (II) intel(0): HSYNC_B: 0x02ef028f (656 start, 752 end) (II) intel(0): VTOTAL_B: 0x020c01df (480 active, 525 total) (II) intel(0): VBLANK_B: 0x020401e7 (488 start, 517 end) (II) intel(0): VSYNC_B: 0x01eb01e9 (490 start, 492 end) (II) intel(0): BCLRPAT_B: 0x00000000 (II) intel(0): VSYNCSHIFT_B: 0x00000000 (II) intel(0): VCLK_DIVISOR_VGA0: 0x00031108 (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (II) intel(0): VCLK_POST_DIV: 0x00020002 (II) intel(0): VGACNTRL: 0x0020008e (enabled) (II) intel(0): TV_CTL: 0x00000000 (II) intel(0): TV_DAC: 0x00000000 (II) intel(0): TV_CSC_Y: 0x00000000 (II) intel(0): TV_CSC_Y2: 0x00000000 (II) intel(0): TV_CSC_U: 0x00000000 (II) intel(0): TV_CSC_U2: 0x00000000 (II) intel(0): TV_CSC_V: 0x00000000 (II) intel(0): TV_CSC_V2: 0x00000000 (II) intel(0): TV_CLR_KNOBS: 0x00000000 (II) intel(0): TV_CLR_LEVEL: 0x00000000 (II) intel(0): TV_H_CTL_1: 0x00000000 (II) intel(0): TV_H_CTL_2: 0x00000000 (II) intel(0): TV_H_CTL_3: 0x00000000 (II) intel(0): TV_V_CTL_1: 0x00000000 (II) intel(0): TV_V_CTL_2: 0x00000000 (II) intel(0): TV_V_CTL_3: 0x00000000 (II) intel(0): TV_V_CTL_4: 0x00000000 (II) intel(0): TV_V_CTL_5: 0x00000000 (II) intel(0): TV_V_CTL_6: 0x00000000 (II) intel(0): TV_V_CTL_7: 0x00000000 (II) intel(0): TV_SC_CTL_1: 0x00000000 (II) intel(0): TV_SC_CTL_2: 0x00000000 (II) intel(0): TV_SC_CTL_3: 0x00000000 (II) intel(0): TV_WIN_POS: 0x00000000 (II) intel(0): TV_WIN_SIZE: 0x00000000 (II) intel(0): TV_FILTER_CTL_1: 0x00000000 (II) intel(0): TV_FILTER_CTL_2: 0x00000000 (II) intel(0): TV_FILTER_CTL_3: 0x00000000 (II) intel(0): TV_CC_CONTROL: 0x00000000 (II) intel(0): TV_CC_DATA: 0x00000000 (II) intel(0): TV_H_LUMA_0: 0x00000000 (II) intel(0): TV_H_LUMA_59: 0x00000000 (II) intel(0): TV_H_CHROMA_0: 0x00000000 (II) intel(0): TV_H_CHROMA_59: 0x00000000 (II) intel(0): FBC_CFB_BASE: 0xffffffff (II) intel(0): FBC_LL_BASE: 0xffffffff (II) intel(0): FBC_CONTROL: 0xffffffff (II) intel(0): FBC_COMMAND: 0xffffffff (II) intel(0): FBC_STATUS: 0xffffffff (II) intel(0): FBC_CONTROL2: 0xffffffff (II) intel(0): FBC_FENCE_OFF: 0xffffffff (II) intel(0): FBC_MOD_NUM: 0xffffffff (II) intel(0): MI_MODE: 0x00000200 (II) intel(0): MI_ARB_STATE: 0x00000040 (II) intel(0): MI_RDRET_STATE: 0x00000000 (II) intel(0): ECOSKPD: 0x00000307 (II) intel(0): DP_B: 0x00000000 (II) intel(0): DPB_AUX_CH_CTL: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA5: 0x00000000 (II) intel(0): DP_C: 0x00000000 (II) intel(0): DPC_AUX_CH_CTL: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA5: 0x00000000 (II) intel(0): DP_D: 0x00000000 (II) intel(0): DPD_AUX_CH_CTL: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA5: 0x00000000 (II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end) (II) intel(0): pipe A dot 113280 n 3 m1 20 m2 6 p1 2 p2 10 (II) intel(0): pipe B dot 25200 n 3 m1 17 m2 8 p1 8 p2 10 (II) intel(0): DumpRegsEnd (II) intel(0): 2 display pipes available. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Module "i2c" already built-in (II) intel(0): Output VGA using monitor section My Monitor (**) intel(0): Option "PreferredMode" "1280x1024@75" (II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70. (II) intel(0): I2C bus "SDVOB DDC Bus" initialized. (II) intel(0): SDVOB: W: 02 (SDVO_CMD_GET_DEVICE_CAPS) (II) intel(0): SDVOB: R: 05 41 31 02 01 01 02 00 (Success) (II) intel(0): Output VGA-1 has no monitor section (II) intel(0): SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 1D (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE) (II) intel(0): SDVOB: R: C4 09 74 40 (Success) (II) intel(0): SDVOB: device VID/DID: 05:41.31, clock range 25.0MHz - 165.0MHz (II) intel(0): SDVOB: 1 input channel (II) intel(0): SDVOB: RGB0 output reported (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized. (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72. (II) intel(0): No SDVO device found on SDVOC (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed. (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed. (II) intel(0): SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT) (II) intel(0): SDVOB: R: 08 (Success) (II) intel(0): Current clock rate multiplier: 8 (II) intel(0): SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: 02 00 (Success) (II) intel(0): SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: 10 0B D0 B4 20 90 31 10 (Success) (II) intel(0): SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: 2D 6C C2 00 1C 00 00 00 (Success) (II) intel(0): SDVOB: W: 11 02 00 (SDVO_CMD_SET_TARGET_OUTPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 18 (SDVO_CMD_GET_OUTPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: 10 0B D0 B4 20 90 31 10 (Success) (II) intel(0): SDVOB: W: 19 (SDVO_CMD_GET_OUTPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: 2D 6C C2 00 1C 00 00 00 (Success) (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): Resizable framebuffer: not available (1 3) (II) intel(0): EDID for output VGA (II) intel(0): SDVOB: W: 0B (SDVO_CMD_GET_ATTACHED_DISPLAYS) (II) intel(0): SDVOB: R: 02 00 (Success) (II) intel(0): I2C device "SDVOB DDC Bus:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "SDVOB DDC Bus:ddc2" registered at address 0xA0. (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (II) intel(0): SDVOB: W: 7A 02 (SDVO_CMD_SET_CONTROL_BUS_SWITCH) (EE) intel(0): Unknown EDID version 3 (II) intel(0): EDID for output VGA-1 (II) intel(0): I2C bus "CRTDDC_A" initialized. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60. (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0. (II) intel(0): I2C device "CRTDDC_A:ddc2" removed. (II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed. (II) intel(0): I2C bus "CRTDDC_A" removed. (II) intel(0): Not using default mode "640x350" (vrefresh out of range) (II) intel(0): Not using default mode "640x400" (vrefresh out of range) (II) intel(0): Not using default mode "720x400" (vrefresh out of range) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "640x480" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "800x600" (vrefresh out of range) (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) (II) intel(0): Not using default mode "1024x768" (vrefresh out of range) (II) intel(0): Not using default mode "1152x864" (vrefresh out of range) (II) intel(0): Not using default mode "1280x960" (hsync out of range) (II) intel(0): Not using default mode "1280x960" (vrefresh out of range) (II) intel(0): Not using default mode "1280x1024" (hsync out of range) (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range) (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range) (II) intel(0): Not using default mode "1600x1200" (hsync out of range) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range) (II) intel(0): Not using default mode "1792x1344" (hsync out of range) (II) intel(0): Not using default mode "1792x1344" (vrefresh out of range) (II) intel(0): Not using default mode "1856x1392" (hsync out of range) (II) intel(0): Not using default mode "1856x1392" (vrefresh out of range) (II) intel(0): Not using default mode "1920x1440" (hsync out of range) (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range) (II) intel(0): Not using default mode "832x624" (vrefresh out of range) (II) intel(0): Not using default mode "1400x1050" (hsync out of range) (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range) (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range) (II) intel(0): Not using default mode "2048x1536" (hsync out of range) (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range) (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range) (II) intel(0): Printing probed modes for output VGA-1 (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) intel(0): Output VGA disconnected (II) intel(0): Output VGA-1 connected (II) intel(0): Using fuzzy aspect match for initial modes (II) intel(0): Output VGA-1 using initial mode 1024x768 (II) intel(0): SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 11 02 00 (SDVO_CMD_SET_TARGET_OUTPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 16 10 0B D0 B4 20 90 31 10 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: (Not supported) (II) intel(0): SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 14 10 0B D0 B4 20 90 31 10 (SDVO_CMD_SET_INPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 15 2D 6C C2 00 1C 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 21 08 (SDVO_CMD_SET_CLOCK_RATE_MULT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS) (II) intel(0): SDVOB: R: 01 (Success) (II) intel(0): SDVOB: W: 05 02 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) intel(0): detected 1024 kB GTT. (II) intel(0): detected 7164 kB stolen memory. (==) intel(0): video overlay key set to 0x101fe (**) intel(0): Using gamma correction (1.0, 1.0, 1.0) (==) intel(0): DPI set to (96, 96) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/local/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "exa" (II) LoadModule: "exa" (II) Loading /usr/local/lib/xorg/modules//libexa.so (II) Module exa: vendor="X.Org Foundation" compiled for 1.6.1, module version = 2.4.0 ABI class: X.Org Video Driver, version 5.0 (II) intel(0): Comparing regs from server start up to After PreInit (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [4] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [5] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [6] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [7] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [8] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [9] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (II) intel(0): Kernel reported 1006592 total, 0 used (II) intel(0): I830CheckAvailableMemory: 4026368 kB available (WW) intel(0): DRI2 requires UXA drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 11, (OK) drmOpenByBusid: drmOpenMinor returns 11 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (II) [drm] DRM interface version 1.2 (II) [drm] DRM open master succeeded. (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. (II) intel(0): [drm] framebuffer mapped by ddx driver (II) intel(0): [drm] added 1 reserved context for kernel (II) intel(0): X context handle = 0x1 (II) intel(0): [drm] installed DRM signal handler (**) intel(0): Framebuffer compression disabled (**) intel(0): Tiling enabled (==) intel(0): VideoRam: 262144 KB (II) intel(0): Attempting memory allocation with tiled buffers. (II) intel(0): Tiled allocation successful. (II) intel(0): [drm] Registers = 0xfe900000 (II) intel(0): [drm] ring buffer = 0xd0000000 (II) intel(0): [drm] mapped front buffer at 0xd0c00000, handle = 0xd0c00000 (II) intel(0): [drm] mapped back buffer at 0xd1c00000, handle = 0xd1c00000 (II) intel(0): [drm] mapped depth buffer at 0xd2000000, handle = 0xd2000000 (II) intel(0): [drm] mapped classic textures at 0xd2400000, handle = 0xd2400000 (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432 (II) intel(0): [dri] visual configs initialized (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear (II) EXA(0): Offscreen pixmap area of 12582912 bytes (II) EXA(0): Driver registered support for the following operations: (II) Solid (II) Copy (II) Composite (RENDER acceleration) (==) intel(0): Backing store disabled (==) intel(0): Silken mouse enabled (II) intel(0): Initializing HW Cursor (II) intel(0): [DRI] installation complete (WW) intel(0): drmDropMaster failed: Unknown error: -1 (II) intel(0): SDVOB: W: 20 (SDVO_CMD_GET_CLOCK_RATE_MULT) (II) intel(0): SDVOB: R: 08 (Success) (II) intel(0): Current clock rate multiplier: 8 (II) intel(0): SDVOB: W: 04 (SDVO_CMD_GET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: 02 00 (Success) (II) intel(0): SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 12 (SDVO_CMD_GET_INPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: 10 0B D0 B4 20 90 31 10 (Success) (II) intel(0): SDVOB: W: 13 (SDVO_CMD_GET_INPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: 2D 6C C2 00 1C 00 00 00 (Success) (II) intel(0): SDVOB: W: 11 02 00 (SDVO_CMD_SET_TARGET_OUTPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 18 (SDVO_CMD_GET_OUTPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: 10 0B D0 B4 20 90 31 10 (Success) (II) intel(0): SDVOB: W: 19 (SDVO_CMD_GET_OUTPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: 2D 6C C2 00 1C 00 00 00 (Success) (II) intel(0): SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): xf86BindGARTMemory: bind key 9 at 0x006ff000 (pgoffset 1791) (II) intel(0): xf86BindGARTMemory: bind key 10 at 0x0082a000 (pgoffset 2090) (II) intel(0): xf86BindGARTMemory: bind key 13 at 0x0082b000 (pgoffset 2091) (II) intel(0): xf86BindGARTMemory: bind key 11 at 0x00c00000 (pgoffset 3072) (II) intel(0): xf86BindGARTMemory: bind key 12 at 0x01000000 (pgoffset 4096) (II) intel(0): xf86BindGARTMemory: bind key 14 at 0x01c00000 (pgoffset 7168) (II) intel(0): xf86BindGARTMemory: bind key 15 at 0x02000000 (pgoffset 8192) (II) intel(0): xf86BindGARTMemory: bind key 16 at 0x02400000 (pgoffset 9216) (II) intel(0): Fixed memory allocation layout: (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB) (II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB) (II) intel(0): 0x006ff000: end of stolen memory (II) intel(0): 0x0082a000-0x0082afff: overlay registers (4 kB) (II) intel(0): 0x0082b000-0x0082bfff: HW status (4 kB) (II) intel(0): 0x00c00000-0x00ffffff: front buffer (4096 kB) X tiled (II) intel(0): 0x01000000-0x01bfffff: exa offscreen (12288 kB) (II) intel(0): 0x01c00000-0x01ffffff: back buffer (4096 kB) X tiled (II) intel(0): 0x02000000-0x023fffff: depth buffer (4096 kB) X tiled (II) intel(0): 0x02400000-0x043fffff: classic textures (32768 kB) (II) intel(0): 0x10000000: end of aperture (II) intel(0): SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): Mode for pipe A: (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) intel(0): Adjusted mode for pipe A: (II) intel(0): Modeline "1024x768"x60.0 130.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (96.7 kHz) (II) intel(0): chosen: dotclock 129600 vco 2592000 ((m 81, m1 12, m2 9), n 1, (p 20, p1 2, p2 10)) (II) intel(0): SDVOB: W: 07 02 00 00 00 (SDVO_CMD_SET_IN_OUT_MAP) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 11 02 00 (SDVO_CMD_SET_TARGET_OUTPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 16 64 19 00 40 41 00 26 30 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: (Not supported) (II) intel(0): SDVOB: W: 14 64 19 00 40 41 00 26 30 (SDVO_CMD_SET_INPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 15 18 88 36 00 18 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 21 02 (SDVO_CMD_SET_CLOCK_RATE_MULT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS) (II) intel(0): SDVOB: R: 01 (Success) (II) intel(0): SDVOB: W: 05 02 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): Hardware state at EnterVT: (II) intel(0): DumpRegsBegin (II) intel(0): CHDECMISC: 0x000000ac (XOR bank/rank, ch2 enh disabled, ch1 enh enabled, ch0 enh enabled, flex disabled, ep not present) (II) intel(0): C0DRB0: 0x00200010 (0x0010) (II) intel(0): C0DRB1: 0x00300020 (0x0020) (II) intel(0): C0DRB2: 0x00400030 (0x0030) (II) intel(0): C0DRB3: 0x86860040 (0x0040) (II) intel(0): C1DRB0: 0x00200010 (0x0010) (II) intel(0): C1DRB1: 0x00300020 (0x0020) (II) intel(0): C1DRB2: 0x00400030 (0x0030) (II) intel(0): C1DRB3: 0x86860040 (0x0040) (II) intel(0): C0DRA01: 0x86868686 (0x8686) (II) intel(0): C0DRA23: 0x00008686 (0x8686) (II) intel(0): C1DRA01: 0x86868686 (0x8686) (II) intel(0): C1DRA23: 0x00008686 (0x8686) (II) intel(0): VCLK_DIVISOR_VGA0: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6) (II) intel(0): VCLK_POST_DIV: 0x00020002 (vga0 p1 = 4, p2 = 2, vga1 p1 = 2, p2 = 2) (II) intel(0): DPLL_TEST: 0x00010001 () (II) intel(0): CACHE_MODE_0: 0x00006820 (II) intel(0): D_STATE: 0x00000000 (II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:) (II) intel(0): RENCLK_GATE_D1: 0x00000000 (II) intel(0): RENCLK_GATE_D2: 0x00000000 (II) intel(0): SDVOB: 0x80480084 (enabled, pipe A, stall disabled, detected) (II) intel(0): SDVOC: 0x00300000 (disabled, pipe A, stall disabled, not detected) (II) intel(0): SDVOUDI: 0x00000000 (II) intel(0): DSPARB: 0x00002fdf (II) intel(0): DSPFW1: 0x00000000 (II) intel(0): DSPFW2: 0x00000000 (II) intel(0): DSPFW3: 0x00000000 (II) intel(0): ADPA: 0x00008c18 (disabled, pipe A, +hsync, +vsync) (II) intel(0): LVDS: 0x00000000 (disabled, pipe A, 18 bit, 1 channel) (II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync) (II) intel(0): DVOB: 0x80480084 (enabled, pipe A, no stall, -hsync, -vsync) (II) intel(0): DVOC: 0x00300000 (disabled, pipe A, no stall, -hsync, -vsync) (II) intel(0): DVOA_SRCDIM: 0x00000000 (II) intel(0): DVOB_SRCDIM: 0x00000000 (II) intel(0): DVOC_SRCDIM: 0x00000000 (II) intel(0): PP_CONTROL: 0x00000000 (power target: off) (II) intel(0): PP_STATUS: 0x00000000 (off, not ready, sequencing idle) (II) intel(0): PP_ON_DELAYS: 0x00000000 (II) intel(0): PP_OFF_DELAYS: 0x00000000 (II) intel(0): PP_DIVISOR: 0x00000000 (II) intel(0): PFIT_CONTROL: 0x00000000 (II) intel(0): PFIT_PGM_RATIOS: 0x00000000 (II) intel(0): PORT_HOTPLUG_EN: 0x00000020 (II) intel(0): PORT_HOTPLUG_STAT: 0x00000000 (II) intel(0): DSPACNTR: 0xd8000000 (enabled, pipe A) (II) intel(0): DSPASTRIDE: 0x00001000 (4096 bytes) (II) intel(0): DSPAPOS: 0x00000000 (0, 0) (II) intel(0): DSPASIZE: 0x02ff03ff (1024, 768) (II) intel(0): DSPABASE: 0x00c00000 (II) intel(0): DSPASURF: 0x00000000 (II) intel(0): DSPATILEOFF: 0x00000000 (II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide) (II) intel(0): PIPEASRC: 0x03ff02ff (1024, 768) (II) intel(0): PIPEASTAT: 0x80000203 (status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS) (II) intel(0): FPA0: 0x00010c09 (n = 1, m1 = 12, m2 = 9) (II) intel(0): FPA1: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): DPLL_A: 0xd4020010 (enabled, dvo, default clock, DAC/serial mode, p1 = 2, p2 = 10, SDVO mult 2) (II) intel(0): DPLL_A_MD: 0x00000000 (II) intel(0): HTOTAL_A: 0x053f03ff (1024 active, 1344 total) (II) intel(0): HBLANK_A: 0x053f03ff (1024 start, 1344 end) (II) intel(0): HSYNC_A: 0x049f0417 (1048 start, 1184 end) (II) intel(0): VTOTAL_A: 0x032502ff (768 active, 806 total) (II) intel(0): VBLANK_A: 0x032502ff (768 start, 806 end) (II) intel(0): VSYNC_A: 0x03080302 (771 start, 777 end) (II) intel(0): BCLRPAT_A: 0x00000000 (II) intel(0): VSYNCSHIFT_A: 0x00000000 (II) intel(0): DSPBCNTR: 0x01000000 (disabled, pipe B) (II) intel(0): DSPBSTRIDE: 0x00000000 (0 bytes) (II) intel(0): DSPBPOS: 0x00000000 (0, 0) (II) intel(0): DSPBSIZE: 0x00000000 (1, 1) (II) intel(0): DSPBBASE: 0x00000000 (II) intel(0): DSPBSURF: 0x00000000 (II) intel(0): DSPBTILEOFF: 0x00000000 (II) intel(0): PIPEBCONF: 0x00000000 (disabled, single-wide) (II) intel(0): PIPEBSRC: 0x027f01df (640, 480) (II) intel(0): PIPEBSTAT: 0x00000000 (status:) (II) intel(0): FPB0: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): FPB1: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): DPLL_B: 0x04800003 (disabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 8, p2 = 10, SDVO mult 1) (II) intel(0): DPLL_B_MD: 0x00000000 (II) intel(0): HTOTAL_B: 0x031f027f (640 active, 800 total) (II) intel(0): HBLANK_B: 0x03170287 (648 start, 792 end) (II) intel(0): HSYNC_B: 0x02ef028f (656 start, 752 end) (II) intel(0): VTOTAL_B: 0x020c01df (480 active, 525 total) (II) intel(0): VBLANK_B: 0x020401e7 (488 start, 517 end) (II) intel(0): VSYNC_B: 0x01eb01e9 (490 start, 492 end) (II) intel(0): BCLRPAT_B: 0x00000000 (II) intel(0): VSYNCSHIFT_B: 0x00000000 (II) intel(0): VCLK_DIVISOR_VGA0: 0x00031108 (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (II) intel(0): VCLK_POST_DIV: 0x00020002 (II) intel(0): VGACNTRL: 0x8020008e (disabled) (II) intel(0): TV_CTL: 0x00000000 (II) intel(0): TV_DAC: 0x00000000 (II) intel(0): TV_CSC_Y: 0x00000000 (II) intel(0): TV_CSC_Y2: 0x00000000 (II) intel(0): TV_CSC_U: 0x00000000 (II) intel(0): TV_CSC_U2: 0x00000000 (II) intel(0): TV_CSC_V: 0x00000000 (II) intel(0): TV_CSC_V2: 0x00000000 (II) intel(0): TV_CLR_KNOBS: 0x00000000 (II) intel(0): TV_CLR_LEVEL: 0x00000000 (II) intel(0): TV_H_CTL_1: 0x00000000 (II) intel(0): TV_H_CTL_2: 0x00000000 (II) intel(0): TV_H_CTL_3: 0x00000000 (II) intel(0): TV_V_CTL_1: 0x00000000 (II) intel(0): TV_V_CTL_2: 0x00000000 (II) intel(0): TV_V_CTL_3: 0x00000000 (II) intel(0): TV_V_CTL_4: 0x00000000 (II) intel(0): TV_V_CTL_5: 0x00000000 (II) intel(0): TV_V_CTL_6: 0x00000000 (II) intel(0): TV_V_CTL_7: 0x00000000 (II) intel(0): TV_SC_CTL_1: 0x00000000 (II) intel(0): TV_SC_CTL_2: 0x00000000 (II) intel(0): TV_SC_CTL_3: 0x00000000 (II) intel(0): TV_WIN_POS: 0x00000000 (II) intel(0): TV_WIN_SIZE: 0x00000000 (II) intel(0): TV_FILTER_CTL_1: 0x00000000 (II) intel(0): TV_FILTER_CTL_2: 0x00000000 (II) intel(0): TV_FILTER_CTL_3: 0x00000000 (II) intel(0): TV_CC_CONTROL: 0x00000000 (II) intel(0): TV_CC_DATA: 0x00000000 (II) intel(0): TV_H_LUMA_0: 0x00000000 (II) intel(0): TV_H_LUMA_59: 0x00000000 (II) intel(0): TV_H_CHROMA_0: 0x00000000 (II) intel(0): TV_H_CHROMA_59: 0x00000000 (II) intel(0): FBC_CFB_BASE: 0xffffffff (II) intel(0): FBC_LL_BASE: 0xffffffff (II) intel(0): FBC_CONTROL: 0xffffffff (II) intel(0): FBC_COMMAND: 0xffffffff (II) intel(0): FBC_STATUS: 0xffffffff (II) intel(0): FBC_CONTROL2: 0xffffffff (II) intel(0): FBC_FENCE_OFF: 0xffffffff (II) intel(0): FBC_MOD_NUM: 0xffffffff (II) intel(0): MI_MODE: 0x00000200 (II) intel(0): MI_ARB_STATE: 0x00000040 (II) intel(0): MI_RDRET_STATE: 0x00000000 (II) intel(0): ECOSKPD: 0x00000307 (II) intel(0): DP_B: 0x00000000 (II) intel(0): DPB_AUX_CH_CTL: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA5: 0x00000000 (II) intel(0): DP_C: 0x00000000 (II) intel(0): DPC_AUX_CH_CTL: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA5: 0x00000000 (II) intel(0): DP_D: 0x00000000 (II) intel(0): DPD_AUX_CH_CTL: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA5: 0x00000000 (II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end) (II) intel(0): pipe A dot 129600 n 1 m1 12 m2 9 p1 2 p2 10 (II) intel(0): pipe B dot 25200 n 3 m1 17 m2 8 p1 8 p2 10 (II) intel(0): DumpRegsEnd (II) intel(0): Output configuration: (II) intel(0): Pipe A is on (II) intel(0): Display plane A is now enabled and connected to pipe A. (II) intel(0): Pipe B is off (II) intel(0): Display plane B is now disabled and connected to pipe B. (II) intel(0): Output VGA is connected to pipe none (II) intel(0): Output VGA-1 is connected to pipe A (II) intel(0): [drm] dma control initialized, using IRQ 257 (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. (**) Option "dpms" (**) intel(0): DPMS enabled (==) intel(0): Intel XvMC decoder disabled (II) intel(0): Set up textured video (II) intel(0): Set up overlay video (II) intel(0): direct rendering: XF86DRI Enabled (WW) intel(0): Option "PreferredMode" is not used (--) RandR disabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) intel(0): Setting screen physical size to 270 x 203 (II) intel(0): SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS) (II) intel(0): SDVOB: R: 01 (Success) (II) intel(0): SDVOB: W: 05 02 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) config/hal: Adding input device Microsoft IntelliMouse? Explorer (II) LoadModule: "mouse" (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.4.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) Microsoft IntelliMouse? Explorer: Device: "/dev/sysmouse" (==) Microsoft IntelliMouse? Explorer: Protocol: "Auto" (**) Microsoft IntelliMouse? Explorer: always reports core events (**) Option "Device" "/dev/sysmouse" (==) Microsoft IntelliMouse? Explorer: Emulate3Buttons, Emulate3Timeout: 50 (**) Microsoft IntelliMouse? Explorer: ZAxisMapping: buttons 4 and 5 (**) Microsoft IntelliMouse? Explorer: Buttons: 9 (**) Microsoft IntelliMouse? Explorer: Sensitivity: 1 (II) XINPUT: Adding extended input device "Microsoft IntelliMouse? Explorer" (type: MOUSE) (**) Microsoft IntelliMouse? Explorer: (accel) keeping acceleration scheme 1 (**) Microsoft IntelliMouse? Explorer: (accel) filter chain progression: 2.00 (**) Microsoft IntelliMouse? Explorer: (accel) filter stage 0: 20.00 ms (**) Microsoft IntelliMouse? Explorer: (accel) set acceleration profile 0 (II) Microsoft IntelliMouse? Explorer: SetupAuto: hw.iftype is 4, hw.model is 0 (II) Microsoft IntelliMouse? Explorer: SetupAuto: protocol is SysMouse (II) config/hal: Adding input device AT Keyboard (II) LoadModule: "kbd" (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) AT Keyboard: always reports core events (**) Option "Protocol" "standard" (**) AT Keyboard: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) AT Keyboard: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) AT Keyboard: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) AT Keyboard: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) AT Keyboard: CustomKeycodes disabled (II) XINPUT: Adding extended input device "AT Keyboard" (type: KEYBOARD) (II) UnloadModule: "mouse" (II) UnloadModule: "kbd" (II) intel(0): SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS) (II) intel(0): SDVOB: R: 01 (Success) (II) intel(0): SDVOB: W: 05 02 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 05 00 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 11 02 00 (SDVO_CMD_SET_TARGET_OUTPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 16 10 0B D0 B4 20 90 31 10 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: (Not supported) (II) intel(0): SDVOB: W: 10 00 (SDVO_CMD_SET_TARGET_INPUT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 14 10 0B D0 B4 20 90 31 10 (SDVO_CMD_SET_INPUT_TIMINGS_PART1) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 15 2D 6C C2 00 1C 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 21 08 (SDVO_CMD_SET_CLOCK_RATE_MULT) (II) intel(0): SDVOB: R: (Success) (II) intel(0): SDVOB: W: 03 (SDVO_CMD_GET_TRAINED_INPUTS) (II) intel(0): SDVOB: R: 01 (Success) (II) intel(0): SDVOB: W: 05 02 00 (SDVO_CMD_SET_ACTIVE_OUTPUTS) (II) intel(0): SDVOB: R: (Success) (II) intel(0): Comparing regs from server start up to After LeaveVT (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x80000203 to 0x00020203 (WW) intel(0): PIPEASTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS (WW) intel(0): PIPEASTAT after: status: VBLANK_INT_ENABLE VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS (II) intel(0): DumpRegsBegin (II) intel(0): CHDECMISC: 0x000000ac (XOR bank/rank, ch2 enh disabled, ch1 enh enabled, ch0 enh enabled, flex disabled, ep not present) (II) intel(0): C0DRB0: 0x00200010 (0x0010) (II) intel(0): C0DRB1: 0x00300020 (0x0020) (II) intel(0): C0DRB2: 0x00400030 (0x0030) (II) intel(0): C0DRB3: 0x86860040 (0x0040) (II) intel(0): C1DRB0: 0x00200010 (0x0010) (II) intel(0): C1DRB1: 0x00300020 (0x0020) (II) intel(0): C1DRB2: 0x00400030 (0x0030) (II) intel(0): C1DRB3: 0x86860040 (0x0040) (II) intel(0): C0DRA01: 0x86868686 (0x8686) (II) intel(0): C0DRA23: 0x00008686 (0x8686) (II) intel(0): C1DRA01: 0x86868686 (0x8686) (II) intel(0): C1DRA23: 0x00008686 (0x8686) (II) intel(0): VCLK_DIVISOR_VGA0: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6) (II) intel(0): VCLK_POST_DIV: 0x00020002 (vga0 p1 = 4, p2 = 2, vga1 p1 = 2, p2 = 2) (II) intel(0): DPLL_TEST: 0x00010001 () (II) intel(0): CACHE_MODE_0: 0x00006820 (II) intel(0): D_STATE: 0x00000000 (II) intel(0): DSPCLK_GATE_D: 0x00000000 (clock gates disabled:) (II) intel(0): RENCLK_GATE_D1: 0x00000000 (II) intel(0): RENCLK_GATE_D2: 0x00000000 (II) intel(0): SDVOB: 0x80300084 (enabled, pipe A, stall disabled, detected) (II) intel(0): SDVOC: 0x00300000 (disabled, pipe A, stall disabled, not detected) (II) intel(0): SDVOUDI: 0x00000000 (II) intel(0): DSPARB: 0x00001d9c (II) intel(0): DSPFW1: 0x00000000 (II) intel(0): DSPFW2: 0x00000000 (II) intel(0): DSPFW3: 0x00000000 (II) intel(0): ADPA: 0x00008c18 (disabled, pipe A, +hsync, +vsync) (II) intel(0): LVDS: 0x00000000 (disabled, pipe A, 18 bit, 1 channel) (II) intel(0): DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync) (II) intel(0): DVOB: 0x80300084 (enabled, pipe A, no stall, -hsync, -vsync) (II) intel(0): DVOC: 0x00300000 (disabled, pipe A, no stall, -hsync, -vsync) (II) intel(0): DVOA_SRCDIM: 0x00000000 (II) intel(0): DVOB_SRCDIM: 0x00000000 (II) intel(0): DVOC_SRCDIM: 0x00000000 (II) intel(0): PP_CONTROL: 0x00000000 (power target: off) (II) intel(0): PP_STATUS: 0x00000000 (off, not ready, sequencing idle) (II) intel(0): PP_ON_DELAYS: 0x00000000 (II) intel(0): PP_OFF_DELAYS: 0x00000000 (II) intel(0): PP_DIVISOR: 0x00000000 (II) intel(0): PFIT_CONTROL: 0x00000000 (II) intel(0): PFIT_PGM_RATIOS: 0x00000000 (II) intel(0): PORT_HOTPLUG_EN: 0x00000020 (II) intel(0): PORT_HOTPLUG_STAT: 0x00000000 (II) intel(0): DSPACNTR: 0x48000000 (disabled, pipe A) (II) intel(0): DSPASTRIDE: 0x00000280 (640 bytes) (II) intel(0): DSPAPOS: 0x00000000 (0, 0) (II) intel(0): DSPASIZE: 0x018f02cf (720, 400) (II) intel(0): DSPABASE: 0x00000000 (II) intel(0): DSPASURF: 0x00000000 (II) intel(0): DSPATILEOFF: 0x00000000 (II) intel(0): PIPEACONF: 0x80000000 (enabled, single-wide) (II) intel(0): PIPEASRC: 0x02cf018f (720, 400) (II) intel(0): PIPEASTAT: 0x00020203 (status: VBLANK_INT_ENABLE VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS) (II) intel(0): FPA0: 0x00031406 (n = 3, m1 = 20, m2 = 6) (II) intel(0): FPA1: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): DPLL_A: 0xc4020033 (enabled, dvo, VGA, default clock, DAC/serial mode, p1 = 2, p2 = 10, SDVO mult 4) (II) intel(0): DPLL_A_MD: 0x00000000 (II) intel(0): HTOTAL_A: 0x038302cf (720 active, 900 total) (II) intel(0): HBLANK_A: 0x038302cf (720 start, 900 end) (II) intel(0): HSYNC_A: 0x036802fc (765 start, 873 end) (II) intel(0): VTOTAL_A: 0x01c0018f (400 active, 449 total) (II) intel(0): VBLANK_A: 0x01c0018f (400 start, 449 end) (II) intel(0): VSYNC_A: 0x019d019b (412 start, 414 end) (II) intel(0): BCLRPAT_A: 0x00000000 (II) intel(0): VSYNCSHIFT_A: 0x00000000 (II) intel(0): DSPBCNTR: 0x01000000 (disabled, pipe B) (II) intel(0): DSPBSTRIDE: 0x00000000 (0 bytes) (II) intel(0): DSPBPOS: 0x00000000 (0, 0) (II) intel(0): DSPBSIZE: 0x00000000 (1, 1) (II) intel(0): DSPBBASE: 0x00000000 (II) intel(0): DSPBSURF: 0x00000000 (II) intel(0): DSPBTILEOFF: 0x00000000 (II) intel(0): PIPEBCONF: 0x00000000 (disabled, single-wide) (II) intel(0): PIPEBSRC: 0x027f01df (640, 480) (II) intel(0): PIPEBSTAT: 0x00000000 (status:) (II) intel(0): FPB0: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): FPB1: 0x00031108 (n = 3, m1 = 17, m2 = 8) (II) intel(0): DPLL_B: 0x04800003 (disabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 8, p2 = 10, SDVO mult 1) (II) intel(0): DPLL_B_MD: 0x00000000 (II) intel(0): HTOTAL_B: 0x031f027f (640 active, 800 total) (II) intel(0): HBLANK_B: 0x03170287 (648 start, 792 end) (II) intel(0): HSYNC_B: 0x02ef028f (656 start, 752 end) (II) intel(0): VTOTAL_B: 0x020c01df (480 active, 525 total) (II) intel(0): VBLANK_B: 0x020401e7 (488 start, 517 end) (II) intel(0): VSYNC_B: 0x01eb01e9 (490 start, 492 end) (II) intel(0): BCLRPAT_B: 0x00000000 (II) intel(0): VSYNCSHIFT_B: 0x00000000 (II) intel(0): VCLK_DIVISOR_VGA0: 0x00031108 (II) intel(0): VCLK_DIVISOR_VGA1: 0x00031406 (II) intel(0): VCLK_POST_DIV: 0x00020002 (II) intel(0): VGACNTRL: 0x0020008e (enabled) (II) intel(0): TV_CTL: 0x00000000 (II) intel(0): TV_DAC: 0x00000000 (II) intel(0): TV_CSC_Y: 0x00000000 (II) intel(0): TV_CSC_Y2: 0x00000000 (II) intel(0): TV_CSC_U: 0x00000000 (II) intel(0): TV_CSC_U2: 0x00000000 (II) intel(0): TV_CSC_V: 0x00000000 (II) intel(0): TV_CSC_V2: 0x00000000 (II) intel(0): TV_CLR_KNOBS: 0x00000000 (II) intel(0): TV_CLR_LEVEL: 0x00000000 (II) intel(0): TV_H_CTL_1: 0x00000000 (II) intel(0): TV_H_CTL_2: 0x00000000 (II) intel(0): TV_H_CTL_3: 0x00000000 (II) intel(0): TV_V_CTL_1: 0x00000000 (II) intel(0): TV_V_CTL_2: 0x00000000 (II) intel(0): TV_V_CTL_3: 0x00000000 (II) intel(0): TV_V_CTL_4: 0x00000000 (II) intel(0): TV_V_CTL_5: 0x00000000 (II) intel(0): TV_V_CTL_6: 0x00000000 (II) intel(0): TV_V_CTL_7: 0x00000000 (II) intel(0): TV_SC_CTL_1: 0x00000000 (II) intel(0): TV_SC_CTL_2: 0x00000000 (II) intel(0): TV_SC_CTL_3: 0x00000000 (II) intel(0): TV_WIN_POS: 0x00000000 (II) intel(0): TV_WIN_SIZE: 0x00000000 (II) intel(0): TV_FILTER_CTL_1: 0x00000000 (II) intel(0): TV_FILTER_CTL_2: 0x00000000 (II) intel(0): TV_FILTER_CTL_3: 0x00000000 (II) intel(0): TV_CC_CONTROL: 0x00000000 (II) intel(0): TV_CC_DATA: 0x00000000 (II) intel(0): TV_H_LUMA_0: 0x00000000 (II) intel(0): TV_H_LUMA_59: 0x00000000 (II) intel(0): TV_H_CHROMA_0: 0x00000000 (II) intel(0): TV_H_CHROMA_59: 0x00000000 (II) intel(0): FBC_CFB_BASE: 0xffffffff (II) intel(0): FBC_LL_BASE: 0xffffffff (II) intel(0): FBC_CONTROL: 0xffffffff (II) intel(0): FBC_COMMAND: 0xffffffff (II) intel(0): FBC_STATUS: 0xffffffff (II) intel(0): FBC_CONTROL2: 0xffffffff (II) intel(0): FBC_FENCE_OFF: 0xffffffff (II) intel(0): FBC_MOD_NUM: 0xffffffff (II) intel(0): MI_MODE: 0x00000200 (II) intel(0): MI_ARB_STATE: 0x00000040 (II) intel(0): MI_RDRET_STATE: 0x00000000 (II) intel(0): ECOSKPD: 0x00000307 (II) intel(0): DP_B: 0x00000000 (II) intel(0): DPB_AUX_CH_CTL: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPB_AUX_CH_DATA5: 0x00000000 (II) intel(0): DP_C: 0x00000000 (II) intel(0): DPC_AUX_CH_CTL: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPC_AUX_CH_DATA5: 0x00000000 (II) intel(0): DP_D: 0x00000000 (II) intel(0): DPD_AUX_CH_CTL: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA1: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA2: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA3: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA4: 0x00000000 (II) intel(0): DPD_AUX_CH_DATA5: 0x00000000 (II) intel(0): FENCE START 0: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 0: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 1: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 1: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 2: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 2: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 3: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 3: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 4: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 4: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 5: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 5: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 6: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 6: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 7: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 7: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 8: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 8: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 9: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 9: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 10: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 10: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 11: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 11: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 12: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 12: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 13: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 13: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 14: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 14: 0x00000000 ( 0x00000000 end) (II) intel(0): FENCE START 15: 0x00000000 (disabled, X tile walk, 0 pitch, 0x00000000 start) (II) intel(0): FENCE END 15: 0x00000000 ( 0x00000000 end) (II) intel(0): pipe A dot 113280 n 3 m1 20 m2 6 p1 2 p2 10 (II) intel(0): pipe B dot 25200 n 3 m1 17 m2 8 p1 8 p2 10 (II) intel(0): DumpRegsEnd (II) intel(0): xf86UnbindGARTMemory: unbind key 9 (II) intel(0): xf86UnbindGARTMemory: unbind key 10 (II) intel(0): xf86UnbindGARTMemory: unbind key 13 (II) intel(0): xf86UnbindGARTMemory: unbind key 11 (II) intel(0): xf86UnbindGARTMemory: unbind key 12 (II) intel(0): xf86UnbindGARTMemory: unbind key 14 (II) intel(0): xf86UnbindGARTMemory: unbind key 15 (II) intel(0): xf86UnbindGARTMemory: unbind key 16 (WW) intel(0): drmDropMaster failed: Unknown error: -1 (II) intel(0): [drm] removed 1 reserved context for kernel (II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xffffff8000749000 at 0x8006a2000 (II) intel(0): [drm] Closed DRM master. -------------- next part -------------- window% xrandr --verbose Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1024 x 1024 VGA disconnected (normal left inverted right x axis y axis) Identifier: 0x3b Timestamp: 221862119 Subpixel: unknown Clones: CRTCs: 0 1 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: VGA-1 connected 1024x768+0+0 (0x3d) normal (normal left inverted right x axis y axis) 0mm x 0mm Identifier: 0x3c Timestamp: 221862119 Subpixel: horizontal rgb Clones: CRTC: 0 CRTCs: 0 1 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 1024x768 (0x3d) 65.0MHz -HSync -VSync *current h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz v: height 768 start 771 end 777 total 806 clock 60.0Hz 800x600 (0x3e) 40.0MHz +HSync +VSync h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz v: height 600 start 601 end 605 total 628 clock 60.3Hz 640x480 (0x3f) 25.2MHz -HSync -VSync h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz v: height 480 start 490 end 492 total 525 clock 59.9Hz -------------- next part -------------- window% xrandr --verbose Screen 0: minimum 640 x 480, current 1280 x 1024, maximum 1280 x 1024 default connected 1280x1024+0+0 (0x102) normal (normal) 0mm x 0mm Identifier: 0x101 Timestamp: 216604766 Subpixel: no subpixels Clones: CRTC: 0 CRTCs: 0 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 1280x1024 (0x102) 0.0MHz *current h: width 1280 start 0 end 0 total 1280 skew 0 clock 0.0KHz v: height 1024 start 0 end 0 total 1024 clock 0.0Hz 1024x768 (0x103) 0.0MHz h: width 1024 start 0 end 0 total 1024 skew 0 clock 0.0KHz v: height 768 start 0 end 0 total 768 clock 0.0Hz 800x600 (0x104) 0.0MHz h: width 800 start 0 end 0 total 800 skew 0 clock 0.0KHz v: height 600 start 0 end 0 total 600 clock 0.0Hz 640x480 (0x105) 0.0MHz h: width 640 start 0 end 0 total 640 skew 0 clock 0.0KHz v: height 480 start 0 end 0 total 480 clock 0.0Hz -------------- next part -------------- X.Org X Server 1.6.1 Release Date: 2009-4-14 X Protocol Version 11, Revision 0 Build Operating System: FreeBSD 7.2-PRERELEASE amd64 Current Operating System: FreeBSD window.trtk.ru 7.2-STABLE FreeBSD 7.2-STABLE #39: Thu Jun 18 16:07:09 MSD 2009 olsi@window.trtk.ru:/usr/obj/usr/src/sys/QUADKERNEL amd64 Build Date: 14 May 2009 01:43:54AM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 5 12:04:02 2009 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "My Monitor" (**) | |-->Device "intel" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "DontZap" "off" (==) Automatically adding devices (==) Automatically enabling devices (WW) `fonts.dir' not found (or not valid) in "/usr/local/share/fonts". Entry deleted from font path. (Run 'mkfontdir' on "/usr/local/share/fonts"). (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local"). (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts"). (**) FontPath set to: /usr/X11R6/lib/X11/fonts/cyrillic, /usr/X11R6/lib/X11/fonts/bitstream-vera, /usr/X11R6/lib/X11/fonts/winfonts, /usr/X11R6/lib/X11/fonts/misc, /usr/X11R6/lib/X11/fonts/75dpi:unscaled, /usr/X11R6/lib/X11/fonts/100dpi:unscaled, /usr/X11R6/lib/X11/fonts/Type1, /usr/local/share/fonts/override, /usr/X11R6/lib/X11/fonts/TTF, /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/, built-ins (==) ModulePath set to "/usr/local/lib/xorg/modules" (**) Extension "RENDER" is enabled (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Mouse1 (WW) Disabling Keyboard1 (II) Loader magic: 0x3d60 (II) Module ABI versions: X.Org ANSI C Emulation: 0.4 X.Org Video Driver: 5.0 X.Org XInput driver : 4.0 X.Org Server Extension : 2.0 (II) Loader running on freebsd (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (--) PCI:*(0@0:2:0) Intel Corporation 82G33/G31 Express Integrated Graphics Controller rev 2, Mem @ 0xfe900000/524288, 0xd0000000/268435456, 0xfe800000/1048576, I/O @ 0x0000bc00/8, BIOS @ 0x????????/65536 (--) PCI: (0@0:2:1) Intel Corporation 82G33/G31 Express Integrated Graphics Controller rev 2, Mem @ 0xfe980000/524288 (II) System resource ranges: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded. This was enabled by default and also specified in the config file. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) "dri2" will be loaded by default. (II) LoadModule: "dbe" (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "glx" (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (==) AIGLX disabled (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension XFree86-DRI (II) LoadModule: "record" (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 2.0 (II) Loading extension RECORD (II) LoadModule: "dri2" (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so (II) Module dri2: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 2.0 (II) Loading extension DRI2 (II) LoadModule: "vesa" (II) Loading /usr/local/lib/xorg/modules/drivers//vesa_drv.so (II) Module vesa: vendor="X.Org Foundation" compiled for 1.6.1, module version = 2.1.0 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 5.0 (II) VESA: driver for VESA chipsets: vesa (II) Primary Device is: PCI 00@00:02:0 (II) resource ranges after probing: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/local/lib/xorg/modules//libvbe.so (II) Module vbe: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.1.0 ABI class: X.Org Video Driver, version 5.0 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/local/lib/xorg/modules//libint10.so (II) Module int10: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 5.0 (II) VESA(0): initializing int10 (==) VESA(0): Write-combining range (0xa0000,0x20000) was already clear (==) VESA(0): Write-combining range (0xc0000,0x40000) was already clear (II) VESA(0): Bad V_BIOS checksum (II) VESA(0): Primary V_BIOS segment is: 0xc000 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (II) VESA(0): VESA BIOS detected (II) VESA(0): VESA VBE Version 3.0 (II) VESA(0): VESA VBE Total Mem: 8128 kB (II) VESA(0): VESA VBE OEM: Intel(r)Q33/Q35/G33 Graphics Chip Accelerated VGA BIOS (II) VESA(0): VESA VBE OEM Software Rev: 1.0 (II) VESA(0): VESA VBE OEM Vendor: Intel Corporation (II) VESA(0): VESA VBE OEM Product: Intel(r)Q33/Q35/G33 Graphics Controller (II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (II) VESA(0): Creating default Display subsection in Screen section "Screen 1" for depth/fbbpp 24/32 (==) VESA(0): Depth 24, (--) framebuffer bpp 32 (==) VESA(0): RGB weight 888 (==) VESA(0): Default visual is TrueColor (**) VESA(0): Using gamma correction (1.0, 1.0, 1.0) (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Module "ddc" already built-in (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (II) VESA(0): VESA VBE DDC supported (II) VESA(0): VESA VBE DDC Level 2 (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec. (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (II) VESA(0): VESA VBE DDC read successfully (II) VESA(0): Manufacturer: SAM Model: 11e Serial#: 1296707895 (II) VESA(0): Year: 2004 Week: 18 (II) VESA(0): EDID Version: 1.3 (II) VESA(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) VESA(0): Sync: Separate Composite (II) VESA(0): Max Image Size [cm]: horiz.: 34 vert.: 27 (II) VESA(0): Gamma: 2.20 (II) VESA(0): DPMS capabilities: Off; RGB/Color Display (II) VESA(0): First detailed timing is preferred mode (II) VESA(0): redX: 0.650 redY: 0.330 greenX: 0.330 greenY: 0.600 (II) VESA(0): blueX: 0.150 blueY: 0.080 whiteX: 0.313 whiteY: 0.329 (II) VESA(0): Supported VESA Video Modes: (II) VESA(0): 720x400@70Hz (II) VESA(0): 640x480@60Hz (II) VESA(0): 640x480@67Hz (II) VESA(0): 640x480@72Hz (II) VESA(0): 640x480@75Hz (II) VESA(0): 800x600@56Hz (II) VESA(0): 800x600@60Hz (II) VESA(0): 800x600@72Hz (II) VESA(0): 800x600@75Hz (II) VESA(0): 832x624@75Hz (II) VESA(0): 1024x768@60Hz (II) VESA(0): 1024x768@70Hz (II) VESA(0): 1024x768@75Hz (II) VESA(0): 1280x1024@75Hz (II) VESA(0): 1152x870@75Hz (II) VESA(0): Manufacturer's mask: 0 (II) VESA(0): Supported Future Video Modes: (II) VESA(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) VESA(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) VESA(0): Supported additional Video Mode: (II) VESA(0): clock: 108.0 MHz Image Size: 338 x 270 mm (II) VESA(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) VESA(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) VESA(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz (II) VESA(0): Monitor name: SyncMaster (II) VESA(0): Serial No: HDDX403784 (II) VESA(0): EDID (in hex): (II) VESA(0): 00ffffffffffff004c2d1e0137314a4d (II) VESA(0): 120e01036c221b782aaaa5a654549926 (II) VESA(0): 145054bfef808180714f010101010101 (II) VESA(0): 010101010101302a009851002a403070 (II) VESA(0): 1300520e1100001e000000fd00384b1e (II) VESA(0): 510e000a202020202020000000fc0053 (II) VESA(0): 796e634d61737465720a2020000000ff (II) VESA(0): 00484444583430333738340a20200041 (II) VESA(0): EDID vendor "SAM", prod id 286 (II) VESA(0): Using hsync ranges from config file (II) VESA(0): Using vrefresh ranges from config file (II) VESA(0): Printing DDC gathered Modelines: (II) VESA(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) VESA(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) (II) VESA(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) (II) VESA(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) (II) VESA(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz) (II) VESA(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz) (II) VESA(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) (II) VESA(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz) (II) VESA(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz) (II) VESA(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) (II) VESA(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz) (II) VESA(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) (II) VESA(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz) (II) VESA(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) (II) VESA(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz) (II) VESA(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) VESA(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz) (II) VESA(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz) (II) VESA(0): Searching for matching VESA mode(s): (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 160 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 161 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 162 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 163 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 164 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 165 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 166 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 167 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 168 (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 13c (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 14d (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 15c (0x0) ModeAttributes: 0x0 WinAAttributes: 0x0 WinBAttributes: 0x0 WinGranularity: 0 WinSize: 0 WinASegment: 0x0 WinBSegment: 0x0 WinFuncPtr: 0x0 BytesPerScanline: 0 XResolution: 0 YResolution: 0 XCharSize: 0 YCharSize: 0 NumberOfPlanes: 0 BitsPerPixel: 0 NumberOfBanks: 0 MemoryModel: 0 BankSize: 0 NumberOfImages: 0 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0x0 LinBytesPerScanLine: 0 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 0 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 13a (1600x1200) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0006018 BytesPerScanline: 1600 XResolution: 1600 YResolution: 1200 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 3 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1600 BnkNumberOfImagePages: 3 LinNumberOfImagePages: 3 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 14b (1600x1200) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0006018 BytesPerScanline: 3200 XResolution: 1600 YResolution: 1200 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 1 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 3200 BnkNumberOfImagePages: 1 LinNumberOfImagePages: 1 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear *Mode: 15a (1600x1200) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0006018 BytesPerScanline: 6400 XResolution: 1600 YResolution: 1200 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 0 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 6400 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 107 (1280x1024) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0006018 BytesPerScanline: 1280 XResolution: 1280 YResolution: 1024 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 5 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 5 LinNumberOfImagePages: 5 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 11a (1280x1024) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0006018 BytesPerScanline: 2560 XResolution: 1280 YResolution: 1024 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 2 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 2 LinNumberOfImagePages: 2 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear *Mode: 11b (1280x1024) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0006018 BytesPerScanline: 5120 XResolution: 1280 YResolution: 1024 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 0 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 5120 BnkNumberOfImagePages: 0 LinNumberOfImagePages: 0 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 105 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0006018 BytesPerScanline: 1024 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 9 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1024 BnkNumberOfImagePages: 9 LinNumberOfImagePages: 9 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 117 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0006018 BytesPerScanline: 2048 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 4 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 2048 BnkNumberOfImagePages: 4 LinNumberOfImagePages: 4 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear *Mode: 118 (1024x768) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0006018 BytesPerScanline: 4096 XResolution: 1024 YResolution: 768 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 1 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 4096 BnkNumberOfImagePages: 1 LinNumberOfImagePages: 1 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear *Mode: 112 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0006018 BytesPerScanline: 2560 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 5 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 2560 BnkNumberOfImagePages: 5 LinNumberOfImagePages: 5 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 114 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0006018 BytesPerScanline: 1600 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 7 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1600 BnkNumberOfImagePages: 7 LinNumberOfImagePages: 7 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear *Mode: 115 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0006018 BytesPerScanline: 3200 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 32 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 3 RedMaskSize: 8 RedFieldPosition: 16 GreenMaskSize: 8 GreenFieldPosition: 8 BlueMaskSize: 8 BlueFieldPosition: 0 RsvdMaskSize: 8 RsvdFieldPosition: 24 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 3200 BnkNumberOfImagePages: 3 LinNumberOfImagePages: 3 LinRedMaskSize: 8 LinRedFieldPosition: 16 LinGreenMaskSize: 8 LinGreenFieldPosition: 8 LinBlueMaskSize: 8 LinBlueFieldPosition: 0 LinRsvdMaskSize: 8 LinRsvdFieldPosition: 24 MaxPixelClock: 230000000 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 101 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0006018 BytesPerScanline: 640 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 24 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 640 BnkNumberOfImagePages: 24 LinNumberOfImagePages: 24 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 103 (800x600) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0006018 BytesPerScanline: 832 XResolution: 800 YResolution: 600 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 8 NumberOfBanks: 1 MemoryModel: 4 BankSize: 0 NumberOfImages: 14 RedMaskSize: 0 RedFieldPosition: 0 GreenMaskSize: 0 GreenFieldPosition: 0 BlueMaskSize: 0 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 832 BnkNumberOfImagePages: 14 LinNumberOfImagePages: 14 LinRedMaskSize: 0 LinRedFieldPosition: 0 LinGreenMaskSize: 0 LinGreenFieldPosition: 0 LinBlueMaskSize: 0 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear Mode: 111 (640x480) ModeAttributes: 0x9b WinAAttributes: 0x7 WinBAttributes: 0x0 WinGranularity: 64 WinSize: 64 WinASegment: 0xa000 WinBSegment: 0x0 WinFuncPtr: 0xc0006018 BytesPerScanline: 1280 XResolution: 640 YResolution: 480 XCharSize: 8 YCharSize: 16 NumberOfPlanes: 1 BitsPerPixel: 16 NumberOfBanks: 1 MemoryModel: 6 BankSize: 0 NumberOfImages: 11 RedMaskSize: 5 RedFieldPosition: 11 GreenMaskSize: 6 GreenFieldPosition: 5 BlueMaskSize: 5 BlueFieldPosition: 0 RsvdMaskSize: 0 RsvdFieldPosition: 0 DirectColorModeInfo: 0 PhysBasePtr: 0xd0000000 LinBytesPerScanLine: 1280 BnkNumberOfImagePages: 11 LinNumberOfImagePages: 11 LinRedMaskSize: 5 LinRedFieldPosition: 11 LinGreenMaskSize: 6 LinGreenFieldPosition: 5 LinBlueMaskSize: 5 LinBlueFieldPosition: 0 LinRsvdMaskSize: 0 LinRsvdFieldPosition: 0 MaxPixelClock: 230000000 (II) VESA(0): Total Memory: 127 64KB banks (8128kB) (II) VESA(0): My Monitor: Using hsync range of 30.00-81.00 kHz (II) VESA(0): My Monitor: Using vrefresh value of 75.00 Hz (II) VESA(0): My Monitor: Using maximum pixel clock of 140.00 MHz (WW) VESA(0): Unable to estimate virtual size (II) VESA(0): Not using built-in mode "1600x1200" (no mode of this name) (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (--) VESA(0): Virtual size is 1280x1024 (pitch 1280) (**) VESA(0): *Built-in mode "1280x1024" (**) VESA(0): *Built-in mode "1024x768" (**) VESA(0): *Built-in mode "800x600" (**) VESA(0): *Built-in mode "640x480" (**) VESA(0): Display dimensions: (340, 270) mm (**) VESA(0): DPI set to (95, 96) (**) VESA(0): Using "Shadow Framebuffer" (II) Loading sub module "shadow" (II) LoadModule: "shadow" (II) Loading /usr/local/lib/xorg/modules//libshadow.so (II) Module shadow: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.1.0 ABI class: X.Org ANSI C Emulation, version 0.4 (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/local/lib/xorg/modules//libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.4 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [1] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [2] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [3] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [4] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/local/lib/xorg/modules//libint10.so (II) VESA(0): initializing int10 (==) VESA(0): Write-combining range (0xa0000,0x20000) was already clear (II) VESA(0): Bad V_BIOS checksum (II) VESA(0): Primary V_BIOS segment is: 0xc000 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (II) VESA(0): VESA BIOS detected (II) VESA(0): VESA VBE Version 3.0 (II) VESA(0): VESA VBE Total Mem: 8128 kB (II) VESA(0): VESA VBE OEM: Intel(r)Q33/Q35/G33 Graphics Chip Accelerated VGA BIOS (II) VESA(0): VESA VBE OEM Software Rev: 1.0 (II) VESA(0): VESA VBE OEM Vendor: Intel Corporation (II) VESA(0): VESA VBE OEM Product: Intel(r)Q33/Q35/G33 Graphics Controller (II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) VESA(0): virtual address = 0x802c00000, physical address = 0xd0000000, size = 8323072 (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (II) VESA(0): Setting up VESA Mode 0x11B (1280x1024) (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Default visual is TrueColor (==) VESA(0): Backing store disabled (**) Option "dpms" (**) VESA(0): DPMS enabled (WW) VESA(0): Option "ModeDebug" is not used (WW) VESA(0): Option "PreferredMode" is not used (==) RandR enabled (II) Initializing built-in extension Generic Event Extension (II) Initializing built-in extension SHAPE (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension BIG-REQUESTS (II) Initializing built-in extension SYNC (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-MISC (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so (II) GLX: Initialized DRISWRAST GL provider for screen 0 (II) config/hal: Adding input device Microsoft IntelliMouse? Explorer (II) LoadModule: "mouse" (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.4.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) Microsoft IntelliMouse? Explorer: Device: "/dev/sysmouse" (==) Microsoft IntelliMouse? Explorer: Protocol: "Auto" (**) Microsoft IntelliMouse? Explorer: always reports core events (**) Option "Device" "/dev/sysmouse" (==) Microsoft IntelliMouse? Explorer: Emulate3Buttons, Emulate3Timeout: 50 (**) Microsoft IntelliMouse? Explorer: ZAxisMapping: buttons 4 and 5 (**) Microsoft IntelliMouse? Explorer: Buttons: 9 (**) Microsoft IntelliMouse? Explorer: Sensitivity: 1 (II) XINPUT: Adding extended input device "Microsoft IntelliMouse? Explorer" (type: MOUSE) (**) Microsoft IntelliMouse? Explorer: (accel) keeping acceleration scheme 1 (**) Microsoft IntelliMouse? Explorer: (accel) filter chain progression: 2.00 (**) Microsoft IntelliMouse? Explorer: (accel) filter stage 0: 20.00 ms (**) Microsoft IntelliMouse? Explorer: (accel) set acceleration profile 0 (II) Microsoft IntelliMouse? Explorer: SetupAuto: hw.iftype is 4, hw.model is 0 (II) Microsoft IntelliMouse? Explorer: SetupAuto: protocol is SysMouse (II) config/hal: Adding input device AT Keyboard (II) LoadModule: "kbd" (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.6.1, module version = 1.3.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 4.0 (**) AT Keyboard: always reports core events (**) Option "Protocol" "standard" (**) AT Keyboard: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) AT Keyboard: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) AT Keyboard: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) AT Keyboard: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) AT Keyboard: CustomKeycodes disabled (II) XINPUT: Adding extended input device "AT Keyboard" (type: KEYBOARD) (II) UnloadModule: "mouse" (II) UnloadModule: "kbd" (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear From bugmaster at FreeBSD.org Mon Jul 6 11:07:10 2009 From: bugmaster at FreeBSD.org (FreeBSD bugmaster) Date: Mon Jul 6 11:10:05 2009 Subject: Current problem reports assigned to freebsd-x11@FreeBSD.org Message-ID: <200907061107.n66B79OU010990@freefall.freebsd.org> Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o ports/135276 x11 x11/xorg: GUI running first time only while using Free o ports/134643 x11 [patch] x11-servers/xorg-server - Unbreak Xorg 7.4 ser o ports/134244 x11 x11/xorg: "intel" driver for Xorg is very broken o ports/134194 x11 graphics/dri fail on 7.2-RELEASE amd64 o ports/134132 x11 x11-servers/xorg-server: Intel i845 - xorg.conf with U o ports/134082 x11 x11/xdriinfo: xdriinfo-1.0.2 build fail o ports/133946 x11 x11-servers/xorg-server [patch] X crashes in xinerama o ports/133609 x11 x11/xorg crashes with vlc, intel video driver o ports/133482 x11 x11/libXext "Generic Event Extension not available" er o ports/133465 x11 x11/xorg: X crashes with mplayer -vo xv with xf86-vide o ports/133419 x11 Unable to build x11-drivers/xf86-video-nsc o ports/133175 x11 [patch] x11/pixman: enable SSE2 support autodetection o ports/132621 x11 x11/xorg tries to install event when deselected o ports/132403 x11 x11/xorg with Radeon X600 (R370): cannot re-initialize o ports/132100 x11 x11/xorg: Xorg server forgets pointer map after xlock o ports/132041 x11 x11/xorg: Broken Intel video driver o ports/131930 x11 [PATCH] x11-servers/xorg-server coredumps on exit o ports/131726 x11 x11-servers/xorg-server: xorg server messes with my eh o ports/131696 x11 x11-servers/xorg-server: hald core dumps make X11 unus o ports/131016 x11 x11/xorg - xorg-7.4 renders system unusable! s kern/130478 x11 [request] Port Linux kernel stub of nouveau to FreeBSD f ports/126812 x11 x11-drivers/xf86-video-ati - System freeze when exitin o ports/125883 x11 x11-fonts/xorg-fonts-cyrillic is installed, but fonts f ports/123137 x11 x11/libX11: missing ru_RU.UTF-8 locale o ports/122830 x11 x11/xorg: Error in I830WaitLpRing() s ports/117907 x11 x11-servers/mga_hal broken on 7.0-BETA (GLIBC error) o ports/116443 x11 x11-drivers/xf86-input-keyboard patch for USB jp106 ke 27 problems total. From joe at snikeris.com Tue Jul 7 00:51:16 2009 From: joe at snikeris.com (Joe Snikeris) Date: Tue Jul 7 00:51:33 2009 Subject: xorg catching signal 11 after switching from virtual console or resume from suspend In-Reply-To: <20b8a1c50907031325g327269a4r4f8117a0c3792348@mail.gmail.com> References: <20b8a1c50907031325g327269a4r4f8117a0c3792348@mail.gmail.com> Message-ID: <20b8a1c50907061751s65547af1w61fabdd72f3858bc@mail.gmail.com> On Fri, Jul 3, 2009 at 3:25 PM, Joe Snikeris wrote: > Hi all, > > I'm using 7.2-RELEASE, intel(4), and xorg-7.4_1. ?After switching back > to x from a virtual console, it catches signal 11 and closes. ?This > also occurs after resuming from suspend-to-RAM. ?I've appended > Xorg.0.log, the output from pciconf -lv, and my xorg.conf. > > How do I proceed from here in order to resolve this issue? Updating to the latest xorg port solved the issue. Sorry for the noise... > > Thanks in advance, > Joe > > --- > > X.Org X Server 1.6.0 > Release Date: 2009-2-25 > X Protocol Version 11, Revision 0 > Build Operating System: FreeBSD 7.2-PRERELEASE i386 > Current Operating System: FreeBSD sussman.home 7.2-RELEASE FreeBSD > 7.2-RELEASE #0: Fri May ?1 08:49:13 UTC 2009 > root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386 > Build Date: 22 April 2009 ?02:40:51PM > > ? ? ? ?Before reporting problems, check http://wiki.x.org > ? ? ? ?to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (==) default setting, > ? ? ? ?(++) from command line, (!!) notice, (II) informational, > ? ? ? ?(WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul ?3 15:19:04 2009 > (==) Using config file: "/etc/X11/xorg.conf" > (==) ServerLayout "X.org Configured" > (**) |-->Screen "Screen0" (0) > (**) | ? |-->Monitor "Monitor0" > (**) | ? |-->Device "Card0" > (**) |-->Input Device "Mouse0" > (**) |-->Input Device "Keyboard0" > (==) Automatically adding devices > (==) Automatically enabling devices > (**) FontPath set to: > ? ? ? ?/usr/local/lib/X11/fonts/misc/, > ? ? ? ?/usr/local/lib/X11/fonts/TTF/, > ? ? ? ?/usr/local/lib/X11/fonts/OTF, > ? ? ? ?/usr/local/lib/X11/fonts/Type1/, > ? ? ? ?/usr/local/lib/X11/fonts/100dpi/, > ? ? ? ?/usr/local/lib/X11/fonts/75dpi/, > ? ? ? ?/usr/local/lib/X11/fonts/misc/, > ? ? ? ?/usr/local/lib/X11/fonts/TTF/, > ? ? ? ?/usr/local/lib/X11/fonts/OTF, > ? ? ? ?/usr/local/lib/X11/fonts/Type1/, > ? ? ? ?/usr/local/lib/X11/fonts/100dpi/, > ? ? ? ?/usr/local/lib/X11/fonts/75dpi/, > ? ? ? ?built-ins > (**) ModulePath set to "/usr/local/lib/xorg/modules" > (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or > 'vmmouse' will be disabled. > (WW) Disabling Mouse0 > (WW) Disabling Keyboard0 > (II) Loader magic: 0x6a0 > (II) Module ABI versions: > ? ? ? ?X.Org ANSI C Emulation: 0.4 > ? ? ? ?X.Org Video Driver: 5.0 > ? ? ? ?X.Org XInput driver : 4.0 > ? ? ? ?X.Org Server Extension : 2.0 > (II) Loader running on freebsd > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 9 > > (--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics > Device rev 2, Mem @ 0xe0000000/134217728, 0xd0000000/524288, I/O @ > 0x00001800/8, BIOS @ 0x????????/65536 > (--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics > Device rev 2, Mem @ 0xe8000000/134217728, 0xd0080000/524288 > (II) System resource ranges: > ? ? ? ?[0] -1 ?0 ? ? ? 0x000f0000 - 0x000fffff (0x10000) MX[B] > ? ? ? ?[1] -1 ?0 ? ? ? 0x000c0000 - 0x000effff (0x30000) MX[B] > ? ? ? ?[2] -1 ?0 ? ? ? 0x00000000 - 0x0009ffff (0xa0000) MX[B] > ? ? ? ?[3] -1 ?0 ? ? ? 0x0000ffff - 0x0000ffff (0x1) IX[B] > ? ? ? ?[4] -1 ?0 ? ? ? 0x00000000 - 0x000000ff (0x100) IX[B] > (II) "extmod" will be loaded. This was enabled by default and also > specified in the config file. > (II) "dbe" will be loaded. This was enabled by default and also > specified in the config file. > (II) "glx" will be loaded. This was enabled by default and also > specified in the config file. > (II) "record" will be loaded. This was enabled by default and also > specified in the config file. > (II) "dri" will be loaded. This was enabled by default and also > specified in the config file. > (II) "dri2" will be loaded. This was enabled by default and also > specified in the config file. > (II) LoadModule: "dbe" > (II) Loading /usr/local/lib/xorg/modules/extensions//libdbe.so > (II) Module dbe: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 1.0.0 > ? ? ? ?Module class: X.Org Server Extension > ? ? ? ?ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "dri" > (II) Loading /usr/local/lib/xorg/modules/extensions//libdri.so > (II) Module dri: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 1.0.0 > ? ? ? ?ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension XFree86-DRI > (II) LoadModule: "dri2" > (II) Loading /usr/local/lib/xorg/modules/extensions//libdri2.so > (II) Module dri2: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 1.0.0 > ? ? ? ?ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DRI2 > (II) LoadModule: "extmod" > (II) Loading /usr/local/lib/xorg/modules/extensions//libextmod.so > (II) Module extmod: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 1.0.0 > ? ? ? ?Module class: X.Org Server Extension > ? ? ? ?ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "glx" > (II) Loading /usr/local/lib/xorg/modules/extensions//libglx.so > (II) Module glx: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 1.0.0 > ? ? ? ?ABI class: X.Org Server Extension, version 2.0 > (==) AIGLX disabled > (II) Loading extension GLX > (II) LoadModule: "record" > (II) Loading /usr/local/lib/xorg/modules/extensions//librecord.so > (II) Module record: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 1.13.0 > ? ? ? ?Module class: X.Org Server Extension > ? ? ? ?ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension RECORD > (II) LoadModule: "intel" > (II) Loading /usr/local/lib/xorg/modules/drivers//intel_drv.so > (II) Module intel: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 2.6.3 > ? ? ? ?Module class: X.Org Video Driver > ? ? ? ?ABI class: X.Org Video Driver, version 5.0 > (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, > ? ? ? ?i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, > ? ? ? ?E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ, > ? ? ? ?965GM, 965GME/GLE, G33, Q35, Q33, > ? ? ? ?Mobile Intel?? GM45 Express Chipset, > ? ? ? ?Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41 > (II) Primary Device is: PCI 00@00:02:0 > (II) resource ranges after xf86ClaimFixedResources() call: > ? ? ? ?[0] -1 ?0 ? ? ? 0x000f0000 - 0x000fffff (0x10000) MX[B] > ? ? ? ?[1] -1 ?0 ? ? ? 0x000c0000 - 0x000effff (0x30000) MX[B] > ? ? ? ?[2] -1 ?0 ? ? ? 0x00000000 - 0x0009ffff (0xa0000) MX[B] > ? ? ? ?[3] -1 ?0 ? ? ? 0x0000ffff - 0x0000ffff (0x1) IX[B] > ? ? ? ?[4] -1 ?0 ? ? ? 0x00000000 - 0x000000ff (0x100) IX[B] > (II) resource ranges after probing: > ? ? ? ?[0] -1 ?0 ? ? ? 0x000f0000 - 0x000fffff (0x10000) MX[B] > ? ? ? ?[1] -1 ?0 ? ? ? 0x000c0000 - 0x000effff (0x30000) MX[B] > ? ? ? ?[2] -1 ?0 ? ? ? 0x00000000 - 0x0009ffff (0xa0000) MX[B] > ? ? ? ?[3] 0 ? 0 ? ? ? 0x000a0000 - 0x000affff (0x10000) MS[B] > ? ? ? ?[4] 0 ? 0 ? ? ? 0x000b0000 - 0x000b7fff (0x8000) MS[B] > ? ? ? ?[5] 0 ? 0 ? ? ? 0x000b8000 - 0x000bffff (0x8000) MS[B] > ? ? ? ?[6] -1 ?0 ? ? ? 0x0000ffff - 0x0000ffff (0x1) IX[B] > ? ? ? ?[7] -1 ?0 ? ? ? 0x00000000 - 0x000000ff (0x100) IX[B] > ? ? ? ?[8] 0 ? 0 ? ? ? 0x000003b0 - 0x000003bb (0xc) IS[B] > ? ? ? ?[9] 0 ? 0 ? ? ? 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/local/lib/xorg/modules//libvgahw.so > (II) Module vgahw: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 0.1.0 > ? ? ? ?ABI class: X.Org Video Driver, version 5.0 > (==) intel(0): Depth 24, (--) framebuffer bpp 32 > (==) intel(0): RGB weight 888 > (==) intel(0): Default visual is TrueColor > (II) intel(0): Integrated Graphics Chipset: Intel(R) 855GME > (--) intel(0): Chipset: "852GM/855GM" > (--) intel(0): Linear framebuffer at 0xE0000000 > (--) intel(0): IO registers at addr 0xD0000000 > (==) intel(0): Using EXA for acceleration > (II) intel(0): 2 display pipes available. > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Module "ddc" already built-in > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Module "i2c" already built-in > (II) intel(0): Output VGA using monitor section Monitor0 > (II) intel(0): Output LVDS has no monitor section > (II) intel(0): I2C bus "LVDSDDC_C" initialized. > (II) intel(0): Attempting to determine panel fixed mode. > (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" > registered at address 0x60. > (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0. > (II) intel(0): I2C bus "DVODDC_D" initialized. > (II) Loading sub module "sil164" > (II) LoadModule: "sil164" > (II) Loading /usr/local/lib/xorg/modules/drivers//sil164.so > (II) Module sil164: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 1.0.0 > ? ? ? ?ABI class: X.Org Video Driver, version 5.0 > (II) intel(0): I2C bus "DVOI2C_E" initialized. > (II) Loading sub module "ch7xxx" > (II) LoadModule: "ch7xxx" > (II) Loading /usr/local/lib/xorg/modules/drivers//ch7xxx.so > (II) Module ch7xxx: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 1.0.0 > ? ? ? ?ABI class: X.Org Video Driver, version 5.0 > (II) intel(0): I2C bus "DVOI2C_E" removed. > (II) intel(0): I2C bus "DVOI2C_E" initialized. > (II) Loading sub module "ivch" > (II) LoadModule: "ivch" > (II) Loading /usr/local/lib/xorg/modules/drivers//ivch.so > (II) Module ivch: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 1.0.0 > ? ? ? ?ABI class: X.Org Video Driver, version 5.0 > (II) intel(0): I2C bus "DVOI2C_E" removed. > (II) intel(0): I2C bus "DVOI2C_B" initialized. > (II) Loading sub module "tfp410" > (II) LoadModule: "tfp410" > (II) Loading /usr/local/lib/xorg/modules/drivers//tfp410.so > (II) Module tfp410: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 1.0.0 > ? ? ? ?ABI class: X.Org Video Driver, version 5.0 > (II) intel(0): I2C bus "DVOI2C_B" removed. > (II) intel(0): I2C bus "DVOI2C_E" initialized. > (II) Loading sub module "ch7017" > (II) LoadModule: "ch7017" > (II) Loading /usr/local/lib/xorg/modules/drivers//ch7017.so > (II) Module ch7017: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 1.0.0 > ? ? ? ?ABI class: X.Org Video Driver, version 5.0 > (II) intel(0): I2C bus "DVOI2C_E" removed. > (II) intel(0): I2C bus "DVOI2C_E" initialized. > (II) intel(0): I2C bus "DVOI2C_E" removed. > (II) intel(0): I2C bus "DVODDC_D" removed. > (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear > (II) intel(0): Resizable framebuffer: not available (1 3) > (II) intel(0): I2C bus "CRTDDC_A" initialized. > (II) intel(0): I2C bus "CRTDDC_A" removed. > (II) intel(0): Output VGA disconnected > (II) intel(0): Output LVDS connected > (II) intel(0): Using exact sizes for initial modes > (II) intel(0): Output LVDS using initial mode 1024x768 > (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear > (II) intel(0): detected 128 kB GTT. > (II) intel(0): detected 8060 kB stolen memory. > (==) intel(0): video overlay key set to 0x101fe > (==) intel(0): Will not try to enable page flipping > (==) intel(0): Triple buffering disabled > (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) > (==) intel(0): DPI set to (96, 96) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/local/lib/xorg/modules//libfb.so > (II) Module fb: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 1.0.0 > ? ? ? ?ABI class: X.Org ANSI C Emulation, version 0.4 > (II) Loading sub module "exa" > (II) LoadModule: "exa" > (II) Loading /usr/local/lib/xorg/modules//libexa.so > (II) Module exa: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 2.4.0 > ? ? ? ?ABI class: X.Org Video Driver, version 5.0 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Module "ramdac" already built-in > (II) intel(0): Comparing regs from server start up to After PreInit > (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to > 0xd0000009 > (WW) intel(0): PP_STATUS before: on, ready, sequencing idle > (WW) intel(0): PP_STATUS after: on, ready, sequencing on > (==) Depth 24 pixmap format is 32 bpp > (II) do I need RAC? ?No, I don't. > (II) resource ranges after preInit: > ? ? ? ?[0] -1 ?0 ? ? ? 0x000f0000 - 0x000fffff (0x10000) MX[B] > ? ? ? ?[1] -1 ?0 ? ? ? 0x000c0000 - 0x000effff (0x30000) MX[B] > ? ? ? ?[2] -1 ?0 ? ? ? 0x00000000 - 0x0009ffff (0xa0000) MX[B] > ? ? ? ?[3] 0 ? 0 ? ? ? 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) > ? ? ? ?[4] 0 ? 0 ? ? ? 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) > ? ? ? ?[5] 0 ? 0 ? ? ? 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) > ? ? ? ?[6] -1 ?0 ? ? ? 0x0000ffff - 0x0000ffff (0x1) IX[B] > ? ? ? ?[7] -1 ?0 ? ? ? 0x00000000 - 0x000000ff (0x100) IX[B] > ? ? ? ?[8] 0 ? 0 ? ? ? 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) > ? ? ? ?[9] 0 ? 0 ? ? ? 0x000003c0 - 0x000003df (0x20) IS[B](OprU) > (II) intel(0): Kernel reported 491520 total, 0 used > (II) intel(0): I830CheckAvailableMemory: 1966080 kB available > (WW) intel(0): DRI2 requires UXA > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 11, (OK) > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 11, (OK) > drmOpenByBusid: Searching for BusID pci:0000:00:02.0 > drmOpenDevice: node name is /dev/dri/card0 > drmOpenDevice: open result is 11, (OK) > drmOpenByBusid: drmOpenMinor returns 11 > drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 > (II) [drm] DRM interface version 1.2 > (II) [drm] DRM open master succeeded. > (II) intel(0): [drm] Using the DRM lock SAREA also for drawables. > (II) intel(0): [drm] framebuffer mapped by ddx driver > (II) intel(0): [drm] added 1 reserved context for kernel > (II) intel(0): X context handle = 0x10 > (II) intel(0): [drm] installed DRM signal handler > (**) intel(0): Framebuffer compression enabled > (**) intel(0): Tiling enabled > (==) intel(0): VideoRam: 131072 KB > (II) intel(0): Attempting memory allocation with tiled buffers. > (WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed > ? ? ? ?(Cannot allocate memory) > (WW) intel(0): xf86AllocateGARTMemory: allocation of 4 pages failed > ? ? ? ?(Cannot allocate memory) > (WW) intel(0): Disabling HW cursor because the cursor memory allocation failed. > (II) intel(0): Tiled allocation successful. > (--) intel(0): DRI is disabled because it needs HW cursor, 2D accel and AGPGART. > (II) intel(0): adjusting plane->pipe mappings to allow for framebuffer > compression > (II) intel(0): Page Flipping disabled > (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 > (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear > (II) EXA(0): Offscreen pixmap area of 12582912 bytes > (II) EXA(0): Driver registered support for the following operations: > (II) ? ? ? ? Solid > (II) ? ? ? ? Copy > (II) ? ? ? ? Composite (RENDER acceleration) > (==) intel(0): Backing store disabled > (==) intel(0): Silken mouse enabled > (II) intel(0): Initializing SW Cursor! > (II) intel(0): xf86BindGARTMemory: bind key 141 at 0x007df000 (pgoffset 2015) > (II) intel(0): xf86BindGARTMemory: bind key 142 at 0x00ddf000 (pgoffset 3551) > (II) intel(0): xf86BindGARTMemory: bind key 143 at 0x00de0000 (pgoffset 3552) > (II) intel(0): xf86BindGARTMemory: bind key 144 at 0x00de1000 (pgoffset 3553) > (II) intel(0): xf86BindGARTMemory: bind key 145 at 0x01000000 (pgoffset 4096) > (II) intel(0): xf86BindGARTMemory: bind key 146 at 0x01400000 (pgoffset 5120) > (II) intel(0): Fixed memory allocation layout: > (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) > (II) intel(0): 0x00020000-0x0011ffff: fake bufmgr (1024 kB) > (II) intel(0): 0x007df000: ? ? ? ? ? ?end of stolen memory > (II) intel(0): 0x007df000-0x00ddefff: compressed frame buffer (6144 > kB, 0x000000003b400000 physical > ) > (II) intel(0): 0x00ddf000-0x00ddffff: compressed ll buffer (4 kB, > 0x00000000179d7000 physical > ) > (II) intel(0): 0x00de0000-0x00de0fff: Core cursor (4 kB, > 0x00000000458da000 physical > ) > (II) intel(0): 0x00de1000-0x00de1fff: overlay registers (4 kB, > 0x00000000486fc000 physical > ) > (II) intel(0): 0x01000000-0x013fffff: front buffer (4096 kB) > (II) intel(0): 0x01400000-0x01ffffff: exa offscreen (12288 kB) > (II) intel(0): 0x08000000: ? ? ? ? ? ?end of aperture > (II) intel(0): using SSC reference clock of 66 MHz > (WW) intel(0): Chosen PLL clock of 49.9 Mhz more than 2% away from > desired 54.2 Mhz > (II) intel(0): Selecting standard 18 bit TMDS pixel format. > (II) intel(0): Output configuration: > (II) intel(0): ? Pipe A is off > (II) intel(0): ? Display plane B is now disabled and connected to pipe A. > (WW) intel(0): ? Hardware claims pipe A is on while software believes it is off > (II) intel(0): ? Pipe B is on > (II) intel(0): ? Display plane A is now enabled and connected to pipe B. > (II) intel(0): ? Output VGA is connected to pipe none > (II) intel(0): ? Output LVDS is connected to pipe B > (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. > (II) intel(0): DPMS enabled > (==) intel(0): Intel XvMC decoder disabled > (II) intel(0): Set up overlay video > (II) intel(0): direct rendering: Failed > (--) RandR disabled > (II) Initializing built-in extension Generic Event Extension > (II) Initializing built-in extension SHAPE > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension BIG-REQUESTS > (II) Initializing built-in extension SYNC > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension XC-MISC > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFIXES > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (II) Initializing built-in extension COMPOSITE > (II) Initializing built-in extension DAMAGE > (II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so > (II) GLX: Initialized DRISWRAST GL provider for screen 0 > (II) intel(0): Setting screen physical size to 270 x 203 > (II) config/hal: Adding input device AT Keyboard > (II) LoadModule: "kbd" > (II) Loading /usr/local/lib/xorg/modules/input//kbd_drv.so > (II) Module kbd: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 1.3.2 > ? ? ? ?Module class: X.Org XInput Driver > ? ? ? ?ABI class: X.Org XInput driver, version 4.0 > (**) AT Keyboard: always reports core events > (**) Option "Protocol" "standard" > (**) AT Keyboard: Protocol: standard > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "xorg" > (**) AT Keyboard: XkbRules: "xorg" > (**) Option "XkbModel" "pc105" > (**) AT Keyboard: XkbModel: "pc105" > (**) Option "XkbLayout" "us" > (**) AT Keyboard: XkbLayout: "us" > (**) Option "CustomKeycodes" "off" > (**) AT Keyboard: CustomKeycodes disabled > (II) XINPUT: Adding extended input device "AT Keyboard" (type: KEYBOARD) > (II) config/hal: Adding input device PS/2 Mouse > (II) LoadModule: "mouse" > (II) Loading /usr/local/lib/xorg/modules/input//mouse_drv.so > (II) Module mouse: vendor="X.Org Foundation" > ? ? ? ?compiled for 1.6.0, module version = 1.4.0 > ? ? ? ?Module class: X.Org XInput Driver > ? ? ? ?ABI class: X.Org XInput driver, version 4.0 > (**) PS/2 Mouse: Device: "/dev/sysmouse" > (==) PS/2 Mouse: Protocol: "Auto" > (**) PS/2 Mouse: always reports core events > (**) Option "Device" "/dev/sysmouse" > (==) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 50 > (**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5 > (**) PS/2 Mouse: Buttons: 9 > (**) PS/2 Mouse: Sensitivity: 1 > (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE) > (**) PS/2 Mouse: (accel) keeping acceleration scheme 1 > (**) PS/2 Mouse: (accel) filter chain progression: 2.00 > (**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms > (**) PS/2 Mouse: (accel) set acceleration profile 0 > (II) PS/2 Mouse: SetupAuto: hw.iftype is 4, hw.model is 0 > (II) PS/2 Mouse: SetupAuto: protocol is SysMouse > (II) intel(0): xf86UnbindGARTMemory: unbind key 141 > (II) intel(0): xf86UnbindGARTMemory: unbind key 142 > (II) intel(0): xf86UnbindGARTMemory: unbind key 143 > (II) intel(0): xf86UnbindGARTMemory: unbind key 144 > (II) intel(0): xf86UnbindGARTMemory: unbind key 145 > (II) intel(0): xf86UnbindGARTMemory: unbind key 146 > (II) intel(0): xf86BindGARTMemory: bind key 141 at 0x007df000 (pgoffset 2015) > (II) intel(0): xf86BindGARTMemory: bind key 142 at 0x00ddf000 (pgoffset 3551) > (II) intel(0): xf86BindGARTMemory: bind key 143 at 0x00de0000 (pgoffset 3552) > (II) intel(0): xf86BindGARTMemory: bind key 144 at 0x00de1000 (pgoffset 3553) > (II) intel(0): xf86BindGARTMemory: bind key 145 at 0x01000000 (pgoffset 4096) > (II) intel(0): xf86BindGARTMemory: bind key 146 at 0x01400000 (pgoffset 5120) > (II) intel(0): Fixed memory allocation layout: > (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB) > (II) intel(0): 0x00020000-0x0011ffff: fake bufmgr (1024 kB) > (II) intel(0): 0x007df000: ? ? ? ? ? ?end of stolen memory > (II) intel(0): 0x007df000-0x00ddefff: compressed frame buffer (6144 > kB, 0x000000003b400000 physical > ) > (II) intel(0): 0x00ddf000-0x00ddffff: compressed ll buffer (4 kB, > 0x00000000179d7000 physical > ) > (II) intel(0): 0x00de0000-0x00de0fff: Core cursor (4 kB, > 0x00000000458da000 physical > ) > (II) intel(0): 0x00de1000-0x00de1fff: overlay registers (4 kB, > 0x00000000486fc000 physical > ) > (II) intel(0): 0x01000000-0x013fffff: front buffer (4096 kB) > (II) intel(0): 0x01400000-0x01ffffff: exa offscreen (12288 kB) > (II) intel(0): 0x08000000: ? ? ? ? ? ?end of aperture > (II) intel(0): using SSC reference clock of 66 MHz > (WW) intel(0): Chosen PLL clock of 49.9 Mhz more than 2% away from > desired 54.2 Mhz > (II) intel(0): Selecting standard 18 bit TMDS pixel format. > > Fatal server error: > Caught signal 11. ?Server aborting > > > Please consult the The X.Org Foundation support > ? ? ? ? at http://wiki.x.org > ?for help. > Please also check the log file at "/var/log/Xorg.0.log" for additional > information. > > (II) UnloadModule: "mouse" > (II) UnloadModule: "kbd" > (II) intel(0): xf86UnbindGARTMemory: unbind key 141 > (II) intel(0): xf86UnbindGARTMemory: unbind key 142 > (II) intel(0): xf86UnbindGARTMemory: unbind key 143 > (II) intel(0): xf86UnbindGARTMemory: unbind key 144 > (II) intel(0): xf86UnbindGARTMemory: unbind key 145 > (II) intel(0): xf86UnbindGARTMemory: unbind key 146 > > --- > > hostb0@pci0:0:0:0: ? ? ?class=0x060000 card=0x055c1014 chip=0x35808086 > rev=0x02 hdr=0x00 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = '82852GM/GME/GMV/PM, 855GM/GME Montara Host-Hub > Interface Bridge' > ? ?class ? ? ?= bridge > ? ?subclass ? = HOST-PCI > none0@pci0:0:0:1: ? ? ? class=0x088000 card=0x055d1014 chip=0x35848086 > rev=0x02 hdr=0x00 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = '82852GM/GME/GMV/PM, 855GM/GME Montara System Memory > Controller' > ? ?class ? ? ?= base peripheral > none1@pci0:0:0:3: ? ? ? class=0x088000 card=0x055e1014 chip=0x35858086 > rev=0x02 hdr=0x00 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = '82852GM/GME/GMV/PM, 855GM/GME Montara Configuration Process' > ? ?class ? ? ?= base peripheral > vgapci0@pci0:0:2:0: ? ? class=0x030000 card=0x05571014 chip=0x35828086 > rev=0x02 hdr=0x00 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated > Graphics Device' > ? ?class ? ? ?= display > ? ?subclass ? = VGA > vgapci1@pci0:0:2:1: ? ? class=0x038000 card=0x05571014 chip=0x35828086 > rev=0x02 hdr=0x00 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated > Graphics Device' > ? ?class ? ? ?= display > uhci0@pci0:0:29:0: ? ? ?class=0x0c0300 card=0x052d1014 chip=0x24c28086 > rev=0x01 hdr=0x00 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller' > ? ?class ? ? ?= serial bus > ? ?subclass ? = USB > uhci1@pci0:0:29:1: ? ? ?class=0x0c0300 card=0x052d1014 chip=0x24c48086 > rev=0x01 hdr=0x00 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller' > ? ?class ? ? ?= serial bus > ? ?subclass ? = USB > uhci2@pci0:0:29:2: ? ? ?class=0x0c0300 card=0x052d1014 chip=0x24c78086 > rev=0x01 hdr=0x00 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller' > ? ?class ? ? ?= serial bus > ? ?subclass ? = USB > ehci0@pci0:0:29:7: ? ? ?class=0x0c0320 card=0x052e1014 chip=0x24cd8086 > rev=0x01 hdr=0x00 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI Controller' > ? ?class ? ? ?= serial bus > ? ?subclass ? = USB > pcib1@pci0:0:30:0: ? ? ?class=0x060400 card=0x00000000 chip=0x24488086 > rev=0x81 hdr=0x01 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge' > ? ?class ? ? ?= bridge > ? ?subclass ? = PCI-PCI > isab0@pci0:0:31:0: ? ? ?class=0x060100 card=0x00000000 chip=0x24cc8086 > rev=0x01 hdr=0x00 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = '82801DBM (ICH4-M) LPC Interface Bridge' > ? ?class ? ? ?= bridge > ? ?subclass ? = PCI-ISA > atapci0@pci0:0:31:1: ? ?class=0x01018a card=0x052d1014 chip=0x24ca8086 > rev=0x01 hdr=0x00 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller' > ? ?class ? ? ?= mass storage > ? ?subclass ? = ATA > none2@pci0:0:31:3: ? ? ?class=0x0c0500 card=0x052d1014 chip=0x24c38086 > rev=0x01 hdr=0x00 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller' > ? ?class ? ? ?= serial bus > ? ?subclass ? = SMBus > pcm0@pci0:0:31:5: ? ? ? class=0x040100 card=0x05581014 chip=0x24c58086 > rev=0x01 hdr=0x00 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller' > ? ?class ? ? ?= multimedia > ? ?subclass ? = audio > none3@pci0:0:31:6: ? ? ?class=0x070300 card=0x05591014 chip=0x24c68086 > rev=0x01 hdr=0x00 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller' > ? ?class ? ? ?= simple comms > ? ?subclass ? = generic modem > cbb0@pci0:2:0:0: ? ? ? ?class=0x060700 card=0x05551014 chip=0x04761180 > rev=0x8d hdr=0x02 > ? ?vendor ? ? = 'Ricoh Company, Ltd.' > ? ?device ? ? = 'unknown Ricoh R/RL/5C476(II)' > ? ?class ? ? ?= bridge > ? ?subclass ? = PCI-CardBus > none4@pci0:2:0:1: ? ? ? class=0x080500 card=0x05561014 chip=0x08221180 > rev=0x13 hdr=0x00 > ? ?vendor ? ? = 'Ricoh Company, Ltd.' > ? ?device ? ? = 'R5C832, R5C843 SDA Standard Compliant SD Host Controller' > ? ?class ? ? ?= base peripheral > ? ?subclass ? = SD host controller > em0@pci0:2:1:0: class=0x020000 card=0x055b1014 chip=0x10778086 rev=0x00 hdr=0x00 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = '82547EI Gigabit Ethernet Controller (Mobile)' > ? ?class ? ? ?= network > ? ?subclass ? = ethernet > iwi0@pci0:2:2:0: ? ? ? ?class=0x028000 card=0x27118086 chip=0x42208086 > rev=0x05 hdr=0x00 > ? ?vendor ? ? = 'Intel Corporation' > ? ?device ? ? = 'MPCI3B ?driverIntel PRO/Wireless 2200BG' > ? ?class ? ? ?= network > > --- > > Section "ServerLayout" > ? ? ? ?Identifier ? ? "X.org Configured" > ? ? ? ?Screen ? ? ?0 ?"Screen0" 0 0 > ? ? ? ?InputDevice ? ?"Mouse0" "CorePointer" > ? ? ? ?InputDevice ? ?"Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > ? ? ? ?ModulePath ? "/usr/local/lib/xorg/modules" > ? ? ? ?FontPath ? ? "/usr/local/lib/X11/fonts/misc/" > ? ? ? ?FontPath ? ? "/usr/local/lib/X11/fonts/TTF/" > ? ? ? ?FontPath ? ? "/usr/local/lib/X11/fonts/OTF" > ? ? ? ?FontPath ? ? "/usr/local/lib/X11/fonts/Type1/" > ? ? ? ?FontPath ? ? "/usr/local/lib/X11/fonts/100dpi/" > ? ? ? ?FontPath ? ? "/usr/local/lib/X11/fonts/75dpi/" > EndSection > > Section "Module" > ? ? ? ?Load ?"dbe" > ? ? ? ?Load ?"dri" > ? ? ? ?Load ?"dri2" > ? ? ? ?Load ?"extmod" > ? ? ? ?Load ?"glx" > ? ? ? ?Load ?"record" > EndSection > > Section "InputDevice" > ? ? ? ?Identifier ?"Keyboard0" > ? ? ? ?Driver ? ? ?"kbd" > EndSection > > Section "InputDevice" > ? ? ? ?Identifier ?"Mouse0" > ? ? ? ?Driver ? ? ?"mouse" > ? ? ? ?Option ? ? ?"Protocol" "auto" > ? ? ? ?Option ? ? ?"Device" "/dev/sysmouse" > ? ? ? ?Option ? ? ?"ZAxisMapping" "4 5 6 7" > EndSection > > Section "Monitor" > ? ? ? ?Identifier ? "Monitor0" > ? ? ? ?VendorName ? "Monitor Vendor" > ? ? ? ?ModelName ? ?"Monitor Model" > EndSection > > Section "Device" > ? ? ? ?Identifier ?"Card0" > ? ? ? ?Driver ? ? ?"intel" > ? ? ? ?VendorName ?"Intel Corporation" > ? ? ? ?BoardName ? "82852/855GM Integrated Graphics Device" > ? ? ? ?BusID ? ? ? "PCI:0:2:0" > EndSection > > Section "Screen" > ? ? ? ?Identifier "Screen0" > ? ? ? ?Device ? ? "Card0" > ? ? ? ?Monitor ? ?"Monitor0" > ? ? ? ?SubSection "Display" > ? ? ? ? ? ? ? ?Viewport ? 0 0 > ? ? ? ? ? ? ? ?Depth ? ? 1 > ? ? ? ?EndSubSection > ? ? ? ?SubSection "Display" > ? ? ? ? ? ? ? ?Viewport ? 0 0 > ? ? ? ? ? ? ? ?Depth ? ? 4 > ? ? ? ?EndSubSection > ? ? ? ?SubSection "Display" > ? ? ? ? ? ? ? ?Viewport ? 0 0 > ? ? ? ? ? ? ? ?Depth ? ? 8 > ? ? ? ?EndSubSection > ? ? ? ?SubSection "Display" > ? ? ? ? ? ? ? ?Viewport ? 0 0 > ? ? ? ? ? ? ? ?Depth ? ? 15 > ? ? ? ?EndSubSection > ? ? ? ?SubSection "Display" > ? ? ? ? ? ? ? ?Viewport ? 0 0 > ? ? ? ? ? ? ? ?Depth ? ? 16 > ? ? ? ?EndSubSection > ? ? ? ?SubSection "Display" > ? ? ? ? ? ? ? ?Viewport ? 0 0 > ? ? ? ? ? ? ? ?Depth ? ? 24 > ? ? ? ?EndSubSection > EndSection > From linimon at FreeBSD.org Tue Jul 7 06:28:34 2009 From: linimon at FreeBSD.org (linimon@FreeBSD.org) Date: Tue Jul 7 06:28:48 2009 Subject: FreeBSD ports that you maintain which are currently marked broken Message-ID: <20090707062833.A55491CD58@mail.droso.net> Dear FreeBSD port maintainer: As part of an ongoing effort to reduce the number of problems in the FreeBSD ports system, we periodically notify users of ports that are marked as "broken" in their Makefiles. In many cases these ports are failing to compile on some subset of the FreeBSD build environments. The most common problem is that recent versions of -CURRENT include gcc4.2, which is much stricter than older versions. The next most common problem is that compiles succeed on the i386 architecture (e.g. the common Intel PC), but fail on one or more of the other architectures due to assumptions about things such as size of various types, byte-alignment issues, and so forth. In occasional cases we see that the same port may have different errors in different build environments. The script that runs on the build cluster uses heuristics to try to 'guess' the error type to help you isolate problems, but it is only a rough guide. One more note: on occasion, there are transient build errors seen on the build farm. Unfortunately, there is not yet any way for this algorithm to tell the difference (humans are much, much better at this kind of thing.) The errors are listed below. In the case where the same problem exists on more than one build environment, the URL points to the latest errorlog for that type. (By 'build environment' here we mean 'combination of 6.x/7.x/-current with target architecture'.) (Note: the dates are included to help you to gauge whether or not the error still applies to the latest version. The program that generates this report is not yet able to determine this automatically.) portname: x11-drivers/xf86-video-nsc broken because: does not build build errors: http://pointyhat.freebsd.org/errorlogs/i386-errorlogs/e.8.20090621131742/xf86-video-nsc-2.8.3_4.log (_Jun_29_18:16:13_UTC_2009) overview: http://portsmon.FreeBSD.org/portoverview.py?category=x11-drivers&portname=xf86-video-nsc If these errors are ones that you are already aware of, please accept our apologies and ignore this message. On the other hand, if you no longer wish to maintain this port (or ports), please reply with a message stating that, and accept our thanks for your efforts in the past. Every effort has been made to make sure that these error reports really do correspond to a port that you maintain. However, due to the fact that this is an automated process, it may indeed generate false matches. If one of these errors fits that description, please forward this email to the author of this software, Mark Linimon , so that he can attempt to fix the problem in the future. Thanks for your efforts to help improve FreeBSD. From nork at FreeBSD.org Tue Jul 7 13:13:03 2009 From: nork at FreeBSD.org (Norikatsu Shigemura) Date: Tue Jul 7 13:13:10 2009 Subject: drm(4) support Radeon HD 4770 (RV740)? Message-ID: <20090707221250.68de5793.nork@FreeBSD.org> Hi rnoland. Do you have any schadule of drm(4) supporting Radeon HD 4770(RV740)? I got a Radeon HD 4770(XFX HD-477A-YDFK), but I noticed that drm(4) doesn't probe it. I read drm(4) driver, but I didn't understand RV740 microcode. -- Norikatsu Shigemura From securityAlerts at a248.boa.aka_mai.com Tue Jul 7 19:54:14 2009 From: securityAlerts at a248.boa.aka_mai.com (Bank of America) Date: Tue Jul 7 19:54:21 2009 Subject: Bank Of America Online Alert : Verify Your Information ID# d885f20cbd1f2d7442e324bc1bcdb689 Message-ID: <200907071920.n67JKPlp083579@web04.triwdata.ch> [mhd_reg_logo.gif] [em_title_red.gif] Dear customer, Protecting the security of our customers and the Bank of America ! network , as a preventative measure, we have temporarily limited access to sensitive account features. To restore your account access, please take the following steps to ensure that your account has not been compromised: After updates : 1.Login to your Bank of America Online Banking account. In case you are not enrolled for Online Banking, you will have to fill in all the required information, including your name and you account number. 2. Review your recent account history for any unauthorized withdrawals or deposits, and check you account profile to make sure not changes have been made. If any unauthorized activity has taken place on your account, report this to Bank of America staff immediately. To get started, please click the link below: ! [1]https://sitekey.bankofamerica.com/sas/signon.do?&detect=3&p=d41d8cd 98f00b204e9800998ecf8427e3265464 _________________________________________________________________ This alert has been sent to you based on your preferences. If you would like to make any changes to your Online Banking Alerts service, please sign in to Online Banking and visit the Manage Alerts section. Because your reply will not be transmitted via secure e-mail, the e-mail address that generated this alert will not accept replies. If you would like to contact Bank of America with questions or comments, please sign in to Online Banking and visit the customer service section. _________________________________________________________________ Bank of America, N.A. Member FDIC. Equal Housing Lender © 2009 Bank of America Corporation. All rights reserved d885f20cbd1f2d7442e324bc1bcdb689 _________________________________________________________________ References 1. http://indietones.net/preview/Onlineid.bankofameri!ca.com/cgi-bini/668d93445065081fa9f2b085cbde792e0d2e0da50a9b4260a03c403a83c60055efdf4a1c/c7206040b068b58cba7fadd6a5b4e341/bofa/ibdIAS/bankofamerica/signon.php?section=signinpage&update=&cookiecheck=yes&destination=nba/signin From securityAlerts at a248.boa.aka_mai.com Tue Jul 7 21:59:23 2009 From: securityAlerts at a248.boa.aka_mai.com (Bank of America) Date: Tue Jul 7 21:59:32 2009 Subject: Bank Of America Online Alert : Verify Your Information ID# d885f20cbd1f2d7442e324bc1bcdb689 Message-ID: <200907071919.n67JJpYR083241@web04.triwdata.ch> [mhd_reg_logo.gif] [em_title_red.gif] Dear customer, Protecting the security of our customers and the Bank of America ! network , as a preventative measure, we have temporarily limited access to sensitive account features. To restore your account access, please take the following steps to ensure that your account has not been compromised: After updates : 1.Login to your Bank of America Online Banking account. In case you are not enrolled for Online Banking, you will have to fill in all the required information, including your name and you account number. 2. Review your recent account history for any unauthorized withdrawals or deposits, and check you account profile to make sure not changes have been made. If any unauthorized activity has taken place on your account, report this to Bank of America staff immediately. To get started, please click the link below: ! [1]https://sitekey.bankofamerica.com/sas/signon.do?&detect=3&p=d41d8cd 98f00b204e9800998ecf8427e3265464 _________________________________________________________________ This alert has been sent to you based on your preferences. If you would like to make any changes to your Online Banking Alerts service, please sign in to Online Banking and visit the Manage Alerts section. Because your reply will not be transmitted via secure e-mail, the e-mail address that generated this alert will not accept replies. If you would like to contact Bank of America with questions or comments, please sign in to Online Banking and visit the customer service section. _________________________________________________________________ Bank of America, N.A. Member FDIC. Equal Housing Lender © 2009 Bank of America Corporation. All rights reserved d885f20cbd1f2d7442e324bc1bcdb689 _________________________________________________________________ References 1. http://indietones.net/preview/Onlineid.bankofameri!ca.com/cgi-bini/668d93445065081fa9f2b085cbde792e0d2e0da50a9b4260a03c403a83c60055efdf4a1c/c7206040b068b58cba7fadd6a5b4e341/bofa/ibdIAS/bankofamerica/signon.php?section=signinpage&update=&cookiecheck=yes&destination=nba/signin From rnoland at FreeBSD.org Wed Jul 8 17:26:02 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Wed Jul 8 17:26:08 2009 Subject: drm(4) support Radeon HD 4770 (RV740)? In-Reply-To: <20090707221250.68de5793.nork@FreeBSD.org> References: <20090707221250.68de5793.nork@FreeBSD.org> Message-ID: <1247006668.87002.2.camel@balrog.2hip.net> On Tue, 2009-07-07 at 22:12 +0900, Norikatsu Shigemura wrote: > Hi rnoland. > > Do you have any schadule of drm(4) supporting Radeon HD 4770(RV740)? > I got a Radeon HD 4770(XFX HD-477A-YDFK), but I noticed that drm(4) > doesn't probe it. I read drm(4) driver, but I didn't understand > RV740 microcode. It looks like I have the chip added in my tree. I think mostly all it is going to need is a pci id added. I'll try and check on it tomorrow. robert. -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090708/3cc64dd6/attachment.pgp From nork at FreeBSD.org Thu Jul 9 13:57:14 2009 From: nork at FreeBSD.org (Norikatsu Shigemura) Date: Thu Jul 9 13:57:20 2009 Subject: drm(4) support Radeon HD 4770 (RV740)? In-Reply-To: <1247006668.87002.2.camel@balrog.2hip.net> References: <20090707221250.68de5793.nork@FreeBSD.org> <1247006668.87002.2.camel@balrog.2hip.net> Message-ID: <20090709225707.946c9cc5.nork@FreeBSD.org> Hi rnoland. On Tue, 07 Jul 2009 17:44:28 -0500 Robert Noland wrote: > > Do you have any schadule of drm(4) supporting Radeon HD 4770(RV740)? > > I got a Radeon HD 4770(XFX HD-477A-YDFK), but I noticed that drm(4) > > doesn't probe it. I read drm(4) driver, but I didn't understand > > RV740 microcode. > It looks like I have the chip added in my tree. I think mostly all it > is going to need is a pci id added. I'll try and check on it tomorrow. Thank you. please! My 4770's pci id is following: vgapci0@pci0:5:0:0: class=0x030000 card=0x29001682 chip=0x94b31002 rev=0x00 hdr=0x00 vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' class = display subclass = VGA From rnoland at FreeBSD.org Thu Jul 9 14:05:05 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Thu Jul 9 14:05:11 2009 Subject: drm(4) support Radeon HD 4770 (RV740)? In-Reply-To: <20090709225707.946c9cc5.nork@FreeBSD.org> References: <20090707221250.68de5793.nork@FreeBSD.org> <1247006668.87002.2.camel@balrog.2hip.net> <20090709225707.946c9cc5.nork@FreeBSD.org> Message-ID: <1247148296.87002.17.camel@balrog.2hip.net> On Thu, 2009-07-09 at 22:57 +0900, Norikatsu Shigemura wrote: > Hi rnoland. > > On Tue, 07 Jul 2009 17:44:28 -0500 > Robert Noland wrote: > > > Do you have any schadule of drm(4) supporting Radeon HD 4770(RV740)? > > > I got a Radeon HD 4770(XFX HD-477A-YDFK), but I noticed that drm(4) > > > doesn't probe it. I read drm(4) driver, but I didn't understand > > > RV740 microcode. > > It looks like I have the chip added in my tree. I think mostly all it > > is going to need is a pci id added. I'll try and check on it tomorrow. > > Thank you. please! My 4770's pci id is following: > > vgapci0@pci0:5:0:0: class=0x030000 card=0x29001682 chip=0x94b31002 rev=0x00 hdr=0x00 > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > class = display > subclass = VGA Please try this patch: http://people.freebsd.org/~rnoland/drm-rv740.patch robert. -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090709/8257d6ae/attachment.pgp From rnoland at FreeBSD.org Thu Jul 9 15:05:30 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Thu Jul 9 15:05:36 2009 Subject: drm(4) support Radeon HD 4770 (RV740)? In-Reply-To: <20090709234735.2d0d8cd4.nork@FreeBSD.org> References: <20090707221250.68de5793.nork@FreeBSD.org> <1247006668.87002.2.camel@balrog.2hip.net> <20090709225707.946c9cc5.nork@FreeBSD.org> <1247148296.87002.17.camel@balrog.2hip.net> <20090709234735.2d0d8cd4.nork@FreeBSD.org> Message-ID: <1247151921.87002.22.camel@balrog.2hip.net> On Thu, 2009-07-09 at 23:47 +0900, Norikatsu Shigemura wrote: > Hi rnoland. > > On Thu, 09 Jul 2009 09:04:56 -0500 > Robert Noland wrote: > > > Thank you. please! My 4770's pci id is following: > > > vgapci0@pci0:5:0:0: class=0x030000 card=0x29001682 chip=0x94b31002 rev=0x00 hdr=0x00 > > > vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.' > > > class = display > > > subclass = VGA > > Please try this patch: > > http://people.freebsd.org/~rnoland/drm-rv740.patch > > Thank you too fast!! > I tested, I think almost works, but... > > 1. freezed, so I read Xorg.0.log, and X require r600_dri.so. > SEE ALSO: Xorg.0.log-required-r600_dri.so.bz2 (attached file) > > 2. I retried by 'ln -s r300_dri.so r600_dri.so', I saw broken screen, > But too fast! > SEE ALSO: Xorg.0.log-fake-r600_dri.so.bz2 > SEE ALSO: Screenshot.jpg > > Next mission is to support r600_dri.so on graphics/dri! This is being worked on. Right now, disable AIGLX in your xorg.conf. The newest drivers try to load r600_dri.so and AIGLX doesn't fallback correctly. Please let me know, as I have approval to commit this as soon as you verify it is working. robert. -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090709/86551a39/attachment.pgp From nork at FreeBSD.org Thu Jul 9 15:18:51 2009 From: nork at FreeBSD.org (Norikatsu Shigemura) Date: Thu Jul 9 15:18:58 2009 Subject: drm(4) support Radeon HD 4770 (RV740)? In-Reply-To: <1247151921.87002.22.camel@balrog.2hip.net> References: <20090707221250.68de5793.nork@FreeBSD.org> <1247006668.87002.2.camel@balrog.2hip.net> <20090709225707.946c9cc5.nork@FreeBSD.org> <1247148296.87002.17.camel@balrog.2hip.net> <20090709234735.2d0d8cd4.nork@FreeBSD.org> <1247151921.87002.22.camel@balrog.2hip.net> Message-ID: <20090710001844.cc0ecaae.nork@FreeBSD.org> Hi rnoland. On Thu, 09 Jul 2009 10:05:21 -0500 Robert Noland wrote: > > Next mission is to support r600_dri.so on graphics/dri! > This is being worked on. Right now, disable AIGLX in your xorg.conf. > The newest drivers try to load r600_dri.so and AIGLX doesn't fallback > correctly. Please let me know, as I have approval to commit this as > soon as you verify it is working. Yes, I disable AIGLX so X doesn't require r600_dri.so, but still broken screen. So I disable DRI, and clear screen but not use drm:-(. Thank you! From rnoland at FreeBSD.org Thu Jul 9 15:24:08 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Thu Jul 9 15:24:14 2009 Subject: drm(4) support Radeon HD 4770 (RV740)? In-Reply-To: <20090710001844.cc0ecaae.nork@FreeBSD.org> References: <20090707221250.68de5793.nork@FreeBSD.org> <1247006668.87002.2.camel@balrog.2hip.net> <20090709225707.946c9cc5.nork@FreeBSD.org> <1247148296.87002.17.camel@balrog.2hip.net> <20090709234735.2d0d8cd4.nork@FreeBSD.org> <1247151921.87002.22.camel@balrog.2hip.net> <20090710001844.cc0ecaae.nork@FreeBSD.org> Message-ID: <1247153036.87002.23.camel@balrog.2hip.net> On Fri, 2009-07-10 at 00:18 +0900, Norikatsu Shigemura wrote: > Hi rnoland. > > On Thu, 09 Jul 2009 10:05:21 -0500 > Robert Noland wrote: > > > Next mission is to support r600_dri.so on graphics/dri! > > This is being worked on. Right now, disable AIGLX in your xorg.conf. > > The newest drivers try to load r600_dri.so and AIGLX doesn't fallback > > correctly. Please let me know, as I have approval to commit this as > > soon as you verify it is working. > > Yes, I disable AIGLX so X doesn't require r600_dri.so, but still > broken screen. So I disable DRI, and clear screen but not use drm:-(. > > Thank you! Can you send me an xorg.log with dri enabled? robert. -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090709/591e0918/attachment.pgp From rnoland at FreeBSD.org Thu Jul 9 15:24:45 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Thu Jul 9 15:24:52 2009 Subject: drm(4) support Radeon HD 4770 (RV740)? In-Reply-To: <20090710001844.cc0ecaae.nork@FreeBSD.org> References: <20090707221250.68de5793.nork@FreeBSD.org> <1247006668.87002.2.camel@balrog.2hip.net> <20090709225707.946c9cc5.nork@FreeBSD.org> <1247148296.87002.17.camel@balrog.2hip.net> <20090709234735.2d0d8cd4.nork@FreeBSD.org> <1247151921.87002.22.camel@balrog.2hip.net> <20090710001844.cc0ecaae.nork@FreeBSD.org> Message-ID: <1247153076.87002.24.camel@balrog.2hip.net> On Fri, 2009-07-10 at 00:18 +0900, Norikatsu Shigemura wrote: > Hi rnoland. > > On Thu, 09 Jul 2009 10:05:21 -0500 > Robert Noland wrote: > > > Next mission is to support r600_dri.so on graphics/dri! > > This is being worked on. Right now, disable AIGLX in your xorg.conf. > > The newest drivers try to load r600_dri.so and AIGLX doesn't fallback > > correctly. Please let me know, as I have approval to commit this as > > soon as you verify it is working. > > Yes, I disable AIGLX so X doesn't require r600_dri.so, but still > broken screen. So I disable DRI, and clear screen but not use drm:-(. xorg.conf and xorg.log please. robert. > Thank you! -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090709/e56a0a62/attachment.pgp From nork at FreeBSD.org Thu Jul 9 15:39:34 2009 From: nork at FreeBSD.org (Norikatsu Shigemura) Date: Thu Jul 9 15:39:40 2009 Subject: drm(4) support Radeon HD 4770 (RV740)? In-Reply-To: <1247153036.87002.23.camel@balrog.2hip.net> References: <20090707221250.68de5793.nork@FreeBSD.org> <1247006668.87002.2.camel@balrog.2hip.net> <20090709225707.946c9cc5.nork@FreeBSD.org> <1247148296.87002.17.camel@balrog.2hip.net> <20090709234735.2d0d8cd4.nork@FreeBSD.org> <1247151921.87002.22.camel@balrog.2hip.net> <20090710001844.cc0ecaae.nork@FreeBSD.org> <1247153036.87002.23.camel@balrog.2hip.net> Message-ID: <20090710003927.a43798bc.nork@FreeBSD.org> Hi rnoland. On Thu, 09 Jul 2009 10:23:56 -0500 Robert Noland wrote: > > Yes, I disable AIGLX so X doesn't require r600_dri.so, but still > > broken screen. So I disable DRI, and clear screen but not use drm:-(. > > Thank you! > Can you send me an xorg.log with dri enabled? Yes, please see attached files. -------------- next part -------------- A non-text attachment was scrubbed... Name: xorg.conf.bz2 Type: application/octet-stream Size: 1066 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090709/5efee708/xorg.conf.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: Xorg.0.log.bz2 Type: application/octet-stream Size: 9478 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090709/5efee708/Xorg.0.log.obj From nork at FreeBSD.org Thu Jul 9 15:50:42 2009 From: nork at FreeBSD.org (Norikatsu Shigemura) Date: Thu Jul 9 15:50:48 2009 Subject: drm(4) support Radeon HD 4770 (RV740)? In-Reply-To: <20090710003927.a43798bc.nork@FreeBSD.org> References: <20090707221250.68de5793.nork@FreeBSD.org> <1247006668.87002.2.camel@balrog.2hip.net> <20090709225707.946c9cc5.nork@FreeBSD.org> <1247148296.87002.17.camel@balrog.2hip.net> <20090709234735.2d0d8cd4.nork@FreeBSD.org> <1247151921.87002.22.camel@balrog.2hip.net> <20090710001844.cc0ecaae.nork@FreeBSD.org> <1247153036.87002.23.camel@balrog.2hip.net> <20090710003927.a43798bc.nork@FreeBSD.org> Message-ID: <20090710005034.51b6d56f.nork@FreeBSD.org> Hi rnoland. On Fri, 10 Jul 2009 00:39:27 +0900 Norikatsu Shigemura wrote: > On Thu, 09 Jul 2009 10:23:56 -0500 > Robert Noland wrote: > > > Yes, I disable AIGLX so X doesn't require r600_dri.so, but still > > > broken screen. So I disable DRI, and clear screen but not use drm:-(. > > > Thank you! > > Can you send me an xorg.log with dri enabled? > Yes, please see attached files. Oops, sorry! I reconfigured xorg.conf, so I got quite clear screen. I'll try to clean-up legacy (Radeon X1650's) configurations, and restructure xorg.conf. Thank you very much! -------------- next part -------------- A non-text attachment was scrubbed... Name: xorg.conf.bz2 Type: application/octet-stream Size: 1015 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090709/1d047d4a/xorg.conf.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: Xorg.0.log.bz2 Type: application/octet-stream Size: 9157 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090709/1d047d4a/Xorg.0.log.obj From mailing at gaturkey.com Thu Jul 9 18:44:01 2009 From: mailing at gaturkey.com (Global Access Travel) Date: Thu Jul 9 18:44:10 2009 Subject: Fam Trip to TURKEY for $999 (Refundable) Message-ID: <3c035ec85b004317a7ce6b85ff4badc6@localhost.localdomain> [http://www.turkeycallingus.com/] Exclusive Boutique Enterprise Turkey FAM ISTANBUL - CAPPADOCIA - KONYA - ANTALYA - PAMUKKALE - KUSADASI 9 Nights / 11 Days $999 ? 5 Continents ? 150 Countries Worldwide ? 100.000 Hotels ? Instant Confirmation [http://www.turkeycallingus.com] [http://www.turkeycallingus.com/turkey-fam/TurkeyFam.htm] [http://www.turkeycallingus.com/turkey-fam/TurkeyFamItinerary.htm] [http://www.turkeycallingus.com/turkey-fam/TurkeyFamRates.htm] [http://www.turkeycallingus.com/turkey-fam/TurkeyFamServices.htm] [http://www.turkeycallingus.com/turkey-fam/TurkeyFamHotels.htm] Global Access proudly presents the biggest FAM Trip of the year, teaming with Turkish Airlines and Turkish Ministry of Tourism and Culture. As the host of ASTA IDE 2010 and European Capital of Culture 2010, Turkey is likely to be the one of the most popular destinations in 2010. Those who act early and get to know this beautiful country better will be able to give a better insight to their clients and secure more bookings. Our specially selected travel agents will stay in best hotels in each town, be escorted by professional, top tour guides, taste exceptionally good examples of Turkish Cuisine, and get to know Turkey in elegant way. Join us for a luxury FAM adventure and be our special guest in our beautiful country! COMBINE WITH World Travel Market! One of the biggest travel shows of Europe and the world, WTM, will be held in London between 9-12 November 2009. Combine your London trip with Turkey and benefit from great agent rates to see one of the most popular tourist destinations from USA and Canada. WE WILL REFUND YOUR MONEY BACK ! Upon booking your 20th passenger on a Global Access Travel Service, we will refund you the whole tour price that you?ve paid for the FAM Trip. If you book 20 or more people on a Global Access Travel Service before the FAM Trip starts, then you will travel for free! About Us Global Access Travel (GA) was founded in Turkey by a group of tourism professionals and marketing experts who recognized the needs to offer online services for accommodations, car rentals, and other travel related services to travel agencies. Through its sophisticated online reservation services, GA offers more than 100,000 hotels, motels, resorts, clubs and apartments all around the world. Other services of GA include car rentals, transfers, special tours, luxury services, city breaks, flight tickets and other services such as tailor made tour packages, exhibition organizations, incentives and other travel related services around the globe at competitive rates. [http://www.TurkeyCallingus.com] www.TurkeyCalling.us [http://www.turkeycallingus.com/turkey-calling-contact-us.htm] Global Access Travel Tel: +90 212 258 58 29 Fax: +90 212 258 34 47 E-mail : [mailto:incoming@gaturkey.com] incoming@gaturkey.com Website: [http://www.turkeycallingus.com/] www.TurkeyCalling.Us This message was sent by: FamTrit turkey, N?zhetiye Cad., istanbul, besiktas 34357, Turkey To be removed click here: http://app.icontact.com/icp/mmail-mprofile.pl?r=47131865&l=82243&s=P07J&m=578549&c=305227 Forward to a friend: http://app.icontact.com/icp/sub/forward?m=578549&s=47131865&c=P07J&cid=305227 From aglait at gmail.com Fri Jul 10 21:04:13 2009 From: aglait at gmail.com (Alan Glait) Date: Fri Jul 10 21:04:21 2009 Subject: [maintainer] Message-ID: bash-2.05b# cat "/usr/ports/devel/xorg-macros/work/util-macros-1.2.1/config.log" This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by util-macros configure 1.2.1, which was generated by GNU Autoconf 2.61. Invocation command line was $ ./configure --prefix=/usr/local --mandir=/usr/local/man --infodir=/usr/local/info/ --build=i386-portbld-freebsd6.0 ## --------- ## ## Platform. ## ## --------- ## hostname = alcorbsd uname -m = i386 uname -r = 6.0-RELEASE uname -s = FreeBSD uname -v = FreeBSD 6.0-RELEASE #6: Mon Sep 4 02:42:19 ART 2006 root@alcorbsd:/usr/src/sys/i386/compile/ALCOR /usr/bin/uname -p = i386 /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /sbin PATH: /bin PATH: /usr/sbin PATH: /usr/bin PATH: /usr/games PATH: /usr/local/sbin PATH: /usr/local/bin PATH: /usr/X11R6/bin PATH: /root/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:1700: checking for a BSD-compatible install configure:1756: result: /usr/bin/install -c -o root -g wheel configure:1767: checking whether build environment is sane configure:1804: error: newly created file is older than distributed files! Check your system clock ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_env_build_alias_set=set ac_cv_env_build_alias_value=i386-portbld-freebsd6.0 ac_cv_env_host_alias_set= ac_cv_env_host_alias_value= ac_cv_env_target_alias_set= ac_cv_env_target_alias_value= lt_cv_sys_max_cmd_len=262144 ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='' AMTAR='' AUTOCONF='' AUTOHEADER='' AUTOMAKE='' AWK='' CHANGELOG_CMD='' CYGPATH_W='' DEFS='' ECHO_C='' ECHO_N='-n' ECHO_T='' INSTALL_DATA='install -o root -g wheel -m 444' INSTALL_PROGRAM='install -s -o root -g wheel -m 555' INSTALL_SCRIPT='install -o root -g wheel -m 555' INSTALL_STRIP_PROGRAM='' LIBOBJS='' LIBS='' LTLIBOBJS='' MAKEINFO='' PACKAGE='' PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg' PACKAGE_NAME='util-macros' PACKAGE_STRING='util-macros 1.2.1' PACKAGE_TARNAME='util-macros' PACKAGE_VERSION='1.2.1' PATH_SEPARATOR=':' SET_MAKE='' SHELL='/bin/sh' STRIP='' VERSION='' am__isrc='' am__leading_dot='' am__tar='' am__untar='' bindir='${exec_prefix}/bin' build_alias='i386-portbld-freebsd6.0' datadir='${datarootdir}' datarootdir='${prefix}/share' distcleancheck_listfiles='' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' dvidir='${docdir}' exec_prefix='NONE' host_alias='' htmldir='${docdir}' includedir='${prefix}/include' infodir='/usr/local/info/' install_sh='' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' mandir='/usr/local/man' mkdir_p='' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='/usr/local' program_transform_name='s,x,x,' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' sysconfdir='${prefix}/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## #define PACKAGE_NAME "util-macros" #define PACKAGE_TARNAME "util-macros" #define PACKAGE_VERSION "1.2.1" #define PACKAGE_STRING "util-macros 1.2.1" #define PACKAGE_BUGREPORT " https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" configure: exit 1 alcorbsd# ls /var/db/pkg 9base-b20060209 imake-6.8.2 nmap-3.93 pear-XML_Util-1.1.1 png-1.2.8_2 ORBit-0.5.17_4 imlib2-1.2.1.009 openldap-client-2.2.30 pecl-PDO-1.0.2 popt-1.7 aalib-1.4.r5_1 inputproto-1.5.0 openntpd-3.9p1_2,2 pecl-fileinfo-1.0.2 portaudit-0.5.10 apache-2.0.58_1 javavmwrapper-2.3.2 p5-Authen-SASL-2.09 pecl-memcache-2.0.1 portmanager-0.4.1_9 autoconf-2.53_3 jpeg-6b_3 p5-Compress-Zlib-1.41 pecl-zip-1.2.1 portupgrade-2.0.1,1 autoconf-2.59_2 kbproto-1.0.3 p5-Digest-1.13 perl-5.8.8 postfix-2.2.6,1 autoconf-2.62 lcms-1.14,1 p5-Digest-MD5-2.33 php5-5.2.8 postfixadmin-2.1.0_1 autoconf-wrapper-20071109 libXau-1.0.4 p5-HTML-Parser-3.47 php5-bz2-5.0.5_2 printproto-1.0.4 automake-1.5_2,1 libXdmcp-1.0.2_1 p5-HTML-Tagset-3.10 php5-calendar-5.1.2_1 proftpd-1.3.0.r3 automake-1.9.6 liba52-0.7.4_1 p5-MIME-Base64-3.07 php5-ctype-5.1.2_1 python25-2.5.2_3 b2evolution-2.4.6 libart_lgpl2-2.3.17 p5-Net-1.19,1 php5-dom-5.1.2_1 qmail-ldap2-with_tls-1.03.20050401a_2 bash-2.05b.007_4 libcheck-0.9.6 p5-Storable-2.15 php5-extensions-1.0 qmake-3.3.5 bash-3.0.16_1 libgcrypt-1.4.4 p5-String-CRC32-1.3 php5-ftp-5.1.2_1 qt-3.3.5 beep-1.0 libgpg-error-1.7 p5-Time-HiRes-1.87,1 php5-gd-5.1.2_1 rrdtool-1.2.11 bigreqsproto-1.0.2 libiconv-1.11_1 p5-URI-1.35 php5-gettext-5.1.2_1 rsync-3.0.0 bison-1.75_2,1 libltdl-1.5.22 p5-gettext-1.03 php5-iconv-5.1.2_1 ruby-1.8.2_5,1 ca_root_nss-3.11.7 libmcrypt-2.5.7_2 p5-libwww-5.803 php5-imap-5.1.2_1 ruby18-bdb1-0.2.2 cacti-0.8.6h libmng-1.0.9 pcre-6.4 php5-ldap-5.1.2_1 samba-3.0.22,1 cclient-2004g,1 libpthread-stubs-0.1 pear-Archive_Tar-1.3.1 php5-mbstring-5.1.2_1 screen-4.0.2_3 cgilib-0.5 libtool-1.5.26 pear-Auth-1.2.3_1 php5-mcrypt-5.1.2_1 sdl-1.2.9_1,2 courier-authlib-base-0.57 libungif-4.1.4 pear-Auth_SASL-1.0.1_1 php5-mysql-5.1.2_1 squid-2.6.18 courier-authlib-mysql-0.57 libxcb-1.1.93 pear-Cache-1.5.4_1 php5-mysql-5.2.8 strace-4.5.1_1 courier-authlib-vchkpw-0.58_2 libxml2-2.7.3 pear-Console_Getopt-1.2 php5-openssl-5.1.2_1 subversion-1.4.3_2 courier-imap-4.0.6_1,1 libxslt-1.1.24_2 pear-DB-1.7.6,1 php5-pcre-5.1.2_1 svgalib-1.4.3_5 cups-base-1.1.23.0_7 linux_base-8-8.0_6 pear-Date-1.4.3 php5-pear-5.0.5_1 sysconftool-0.15 cvsup-without-gui-16.1h_2 lynx-2.8.5_2 pear-File-1.2.0,1 php5-posix-5.1.2_1 tiff-3.7.4 cyrus-sasl-2.1.21_1 m4-1.4.11,1 pear-File_Passwd-1.1.5 php5-session-5.2.8 ucspi-tcp-0.88_2 daemontools-0.76_11 maildrop-2.0.1 pear-HTTP_Request-1.3.0 php5-simplexml-5.1.2_1 unzip-5.52_2 db43-4.3.29 ming-0.2a_1 pear-Log-1.9.2 php5-snmp-5.1.2_1 vpopmail-5.4.13 ddclient-3.7.1_1 mmencode-2.7 pear-Mail-1.1.6 php5-sqlite-5.1.2_1 wgetpro-0.1.3 djbfft-0.76_2 mod_xmlns-0.97 pear-Mail_Mime-1.3.1 php5-tokenizer-5.1.2_1 xcb-proto-1.3 electricfence-2.2.2_2 mpd-3.18_4 pear-Net_POP3-1.3.6 php5-wddx-5.1.2_1 xcmiscproto-1.1.2 expat-2.0.0_1 mysql-client-5.0.16 pear-Net_SMTP-1.2.6_1 php5-xml-5.1.2_1 xextproto-7.0.5 fetchmail-6.3.8_4 mysql-server-5.0.22 pear-Net_Socket-1.0.6 php5-xml-5.2.8 xf86bigfontproto-1.1.2 fontconfig-2.3.2,1 nas-1.7b pear-Net_URL-1.0.14 php5-xmlreader-5.1.2_1 xorg-libraries-6.8.2 freetype2-2.1.10_1 nasm-0.98.39,1 pear-PEAR-1.4.4 php5-xmlrpc-5.1.2_1 xproto-7.0.14 gettext-0.14.5 neon-0.26.3 pear-SOAP-0.9.1 php5-xmlwriter-5.1.2_1 xtrans-1.2.3 glib-1.2.10_12 nessus-2.2.6 pear-Services_Weather-1.3.2_1 php5-zlib-5.1.2_1 zip-3.0 gmake-3.80_2 nessus-libnasl-2.2.6 pear-XML_Parser-1.2.7 pkg_install-20060113 zziplib-0.10.82 gnutls-1.0.24_1 nessus-libraries-2.2.6 pear-XML_RPC-1.4.3 pkgconfig-0.20 help2man-1.36.3 nessus-plugins-2.2.6 pear-XML_Serializer-0.16.0 pkgdb.db From fbNOREPLY at myfanbox.com Fri Jul 10 21:36:10 2009 From: fbNOREPLY at myfanbox.com (bunchhoanvann) Date: Fri Jul 10 21:36:18 2009 Subject: I sent animated rose to you Message-ID: <4A57B1F0.00000F3D@smtp151.sms.ac> I sent animated rose to you Check it out! http://optin.fanbox.com/DeveloperApp/Introduction.aspx?mlid=6385168&encemail=7%2bIOEI2Gs5%2fLD38Q1LuFwipjZclFdOsf&vlmid=LVg8D6pCXZKgsCOLyblGleZBqUxmEA9E2%2Fe5sceCrc8%3D&vet=106&dt=071009&ptid=1&aec=1&tec=1 This email was sent by the Application: Animated Roses. You can stop recieving emails here http://profile.fanbox.com/ApplicationManager/APIEmailSettings.aspx?cid=31991&em=7%2bIOEI2Gs5%2fLD38Q1LuFwipjZclFdOsf&vet=106&mlid=6385168&dt=071009&ptid=1&aec=1&tec=1. From fbNOREPLY at myfanbox.com Fri Jul 10 21:43:20 2009 From: fbNOREPLY at myfanbox.com (bunchhoanvann) Date: Fri Jul 10 21:43:26 2009 Subject: I sent animated rose to you Message-ID: <4A57B13C.00000206@smtp148.sms.ac> I sent animated rose to you Check it out! http://optin.fanbox.com/DeveloperApp/Introduction.aspx?mlid=6378649&encemail=7%2bIOEI2Gs5%2fLD38Q1LuFwipjZclFdOsf&vlmid=pab88J3ku%2Byi7ntWxMKwF9v%2FViLSM%2BNfkkI6zZ4vb3E%3D&vet=106&dt=071009&ptid=1&aec=1&tec=1 This email was sent by the Application: Animated Roses. You can stop recieving emails here http://profile.fanbox.com/ApplicationManager/APIEmailSettings.aspx?cid=31991&em=7%2bIOEI2Gs5%2fLD38Q1LuFwipjZclFdOsf&vet=106&mlid=6378649&dt=071009&ptid=1&aec=1&tec=1. From welcome at myfanbox.com Sat Jul 11 06:00:44 2009 From: welcome at myfanbox.com (FanBox Team) Date: Sat Jul 11 06:00:50 2009 Subject: Welcome to FanBox Message-ID: <4A5825D4.0000002B@smtp145.sms.ac> Welcome to the FanBox platform In this email, we'll tell you about your new FanBox account and: Why you want it How you can control or cancel it Why you want it FanBox enables millions of people to use thousands of applications provided by the best application developers from around the world. Applications that improve your life - such as: Your own @FanBox.com totally spam-free email address Automatically backs up your PC files — you can access them from any Web connection Games to entertain you for hours How you can control or cancel it Visit your Web-desktop http://www.fanbox.com/socnet/EmailStat.aspx?lit=3&me=.szLzPB9dFDYChfvIBcdOKqUWMV-Otvz9-nyyI0cM63aPfWo6tctNmqwMYB-qA043TVfCtPGq87RV055oxsS-Vak3PN6Gb4Ii3qIaGzD3Vu4Od8UlSz2oRka-.9-X1d1.LdINR5hKaVoRv6BNuWhxXXAv4ONTqDLdS06cOP9QQgOGYn3p0WcbCGPnIaMJQ6X&fan=tKg7ROr2mUc=&opg=http://profile.fanbox.com/profile/NewCustomProfile.aspx?u=&vet=45&dt=071009&mlid=1604523346 to enjoy games and applications Visit email settings http://www.fanbox.com/socnet/EmailStat.aspx?lit=5&me=.szLzPB9dFDYChfvIBcdOKqUWMV-Otvz9-nyyI0cM63aPfWo6tctNmqwMYB-qA043TVfCtPGq87RV055oxsS-fB3M0uqNQY8NNhAXmnkLYAY.8r.BStLzGv4PE5.skeHJUhmIZFQx9I2JGyh3SLQLQTcXhfRuAbh6uu7P3gesfc.onn2RBPQEm-DUhdHPB-l&fan=tKg7ROr2mUc=&opg=http://profile.fanbox.com/Preferences/Main.aspx?open=emailPref&vet=45&dt=071009&mlid=1604523346 to control the frequency of emails You can instantly cancel your account http://profile.fanbox.com/ApplicationManager/CancelAccount.aspx?em=7%2BIOEI2Gs5%2FLD38Q1LuFwipjZclFdOsf&vet=FANBOXWELCOME&mlid=1604523346 in one easy step We hope you enjoy FanBox as much as millions of others. Look for the "Suggest!" links all over the site to let us know what you think. We're here to serve you. Terms of Service http://www.fanbox.com/socnet/EmailStat.aspx?lit=-1&me=.szLzPB9dFDYChfvIBcdOKqUWMV-Otvz9-nyyI0cM63aPfWo6tctNmqwMYB-qA043TVfCtPGq87RV055oxsS-U0Uv0lSKJN8H-voXGANjV0SgIy5bqfbx9VlWcr86R9VGKoT2TgBtxs3214xq.VUq78FNwBNvDnWwInmAzW5L4b17svhUkpRhO5IJxCF64NC&fan=F1Qw1zM6IEk=&opg=http://profile.fanbox.com/Homepage/TermsAndCons.aspx&vet=45&dt=071009&mlid=1604523346 | Privacy Policy http://www.fanbox.com/socnet/EmailStat.aspx?lit=-1&me=.szLzPB9dFDYChfvIBcdOKqUWMV-Otvz9-nyyI0cM63aPfWo6tctNmqwMYB-qA043TVfCtPGq87RV055oxsS-Q0N0dDGZjal5a8AR9FuHyNMVjIhlwSO1X4kP2Ph9vL-HZC-iiYWBRe5bo1MqNe.Nvkav.vU9LzmckXGetJd-FJXsNitI4AqxwZfwXDMS3UF&fan=F1Qw1zM6IEk=&opg=http://profile.fanbox.com/Homepage/Privacy.aspx&vet=45&dt=071009&mlid=1604523346 | FanBox — 255 G Street #723, San Diego, CA 92101, USA From rnoland at FreeBSD.org Sat Jul 11 11:19:19 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Sat Jul 11 11:19:53 2009 Subject: [maintainer] In-Reply-To: References: Message-ID: <1247311151.1745.6.camel@balrog.2hip.net> On Fri, 2009-07-10 at 17:37 -0300, Alan Glait wrote: > configure:1767: checking whether build environment is sane > configure:1804: error: newly created file is older than distributed > files! > Check your system clock It can be really helpful to read the output of error messages... robert. -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090711/a812fc93/attachment.pgp From dan at langille.org Sat Jul 11 12:42:07 2009 From: dan at langille.org (Dan Langille) Date: Sat Jul 11 12:42:19 2009 Subject: x11-servers/xorg-server upgrade problem Message-ID: <4A588442.6090102@langille.org> The upgrade problem seems to be: port wants 'randrproto >= 1.2.99.1' but version of RandrProto is 1.2.1 # pkg_info | grep randrproto randrproto-1.2.1 Randr extension headers I have the latest portsnap. But FreshPorts and cvsweb both indicate that randrproto is at 1.3.0 in the tree... yet portsnap does not get it. checking for XSERVERCFLAGS... configure: error: Package requirements (randrproto >= 1.2.99.1 renderproto >= 0.9.3 fixesproto >= 4.0 damageproto >= 1.1 xcmiscproto xextproto >= 7.0.3 xproto >= 7.0.13 xtrans >= 1.2.2 bigreqsproto resourceproto fontsproto inputproto >= 1.5 kbproto >= 1.0.3 videoproto compositeproto >= 0.4 recordproto scrnsaverproto >= 1.1 resourceproto xineramaproto xinerama xkbfile xfont xau fontenc pixman-1 >= 0.13.2 hal dbus-1 xdmcp) were not met: Requested 'randrproto >= 1.2.99.1' but version of RandrProto is 1.2.1 Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables XSERVERCFLAGS_CFLAGS and XSERVERCFLAGS_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. ===> Script "configure" failed unexpectedly. Please report the problem to x11@FreeBSD.org [maintainer] and attach the "/usr/ports/x11-servers/xorg-server/work/xorg-server-1.6.1/config.log" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. an `ls /var/db/pkg`). *** Error code 1 Stop in /usr/ports/x11-servers/xorg-server. *** Error code 1 Stop in /usr/ports/x11-servers/xorg-server. ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade20090711-44668-1qp3tw5-0 env UPGRADE_TOOL=portupgrade UPGRADE_PORT=xorg-server-1.4.2,1 UPGRADE_PORT_VER=1.4.2,1 make ** Fix the problem and try again. ** Listing the failed packages (-:ignored / *:skipped / !:failed) ! x11-servers/xorg-server (xorg-server-1.4.2,1) (configure error) -------------- next part -------------- This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by xorg-server configure 1.6.1, which was generated by GNU Autoconf 2.63. Invocation command line was $ ./configure --disable-dmx --disable-xvfb --disable-xnest --localstatedir=/var --without-dtrace --disable-xephyr --enable-record=yes --with-xkb-path=/usr/local/share/X11/xkb --enable-config-hal=yes --enable-aiglx=yes --enable-install-setuid=yes --x-libraries=/usr/local/lib --x-includes=/usr/local/include --prefix=/usr/local --mandir=/usr/local/man --infodir=/usr/local/info/ --build=amd64-portbld-freebsd7.2 ## --------- ## ## Platform. ## ## --------- ## hostname = polo.unixathome.org uname -m = amd64 uname -r = 7.2-STABLE uname -s = FreeBSD uname -v = FreeBSD 7.2-STABLE #10: Mon Jun 1 19:19:13 EDT 2009 dan@polo.unixathome.org:/usr/obj/usr/src/sys/PHENOM /usr/bin/uname -p = amd64 /bin/uname -X = unknown /bin/arch = unknown /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /sbin PATH: /bin PATH: /usr/sbin PATH: /usr/bin PATH: /usr/games PATH: /usr/local/sbin PATH: /usr/local/bin PATH: /root/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:2766: checking for a BSD-compatible install configure:2834: result: /usr/bin/install -c -o root -g wheel configure:2845: checking whether build environment is sane configure:2888: result: yes configure:2913: checking for a thread-safe mkdir -p configure:2952: result: /usr/local/bin/gmkdir -p configure:2965: checking for gawk configure:2981: found /usr/local/bin/gawk configure:2992: result: gawk configure:3003: checking whether make sets $(MAKE) configure:3025: result: yes configure:3209: checking whether to enable maintainer-specific portions of Makefiles configure:3218: result: no configure:3297: checking for gcc configure:3324: result: cc configure:3556: checking for C compiler version configure:3564: cc --version >&5 cc (GCC) 4.2.1 20070719 [FreeBSD] Copyright (C) 2007 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:3568: $? = 0 configure:3575: cc -v >&5 Using built-in specs. Target: amd64-undermydesk-freebsd Configured with: FreeBSD/amd64 system compiler Thread model: posix gcc version 4.2.1 20070719 [FreeBSD] configure:3579: $? = 0 configure:3586: cc -V >&5 cc: '-V' option must have argument configure:3590: $? = 1 configure:3613: checking for C compiler default output file name configure:3635: cc -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:3639: $? = 0 configure:3677: result: a.out configure:3696: checking whether the C compiler works configure:3706: ./a.out configure:3710: $? = 0 configure:3729: result: yes configure:3736: checking whether we are cross compiling configure:3738: result: no configure:3741: checking for suffix of executables configure:3748: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:3752: $? = 0 configure:3778: result: configure:3784: checking for suffix of object files configure:3810: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:3814: $? = 0 configure:3839: result: o configure:3843: checking whether we are using the GNU C compiler configure:3872: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:3879: $? = 0 configure:3896: result: yes configure:3905: checking whether cc accepts -g configure:3935: cc -c -g conftest.c >&5 configure:3942: $? = 0 configure:4043: result: yes configure:4060: checking for cc option to accept ISO C89 configure:4134: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:4141: $? = 0 configure:4164: result: none needed configure:4193: checking for style of include used by make configure:4221: result: GNU configure:4246: checking dependency style of cc configure:4337: result: gcc3 configure:4361: checking dependency style of cc configure:4452: result: gcc3 configure:4481: checking for a BSD-compatible install configure:4549: result: /usr/bin/install -c -o root -g wheel configure:4560: checking whether ln -s works configure:4564: result: yes configure:4577: checking build system type configure:4595: result: amd64-portbld-freebsd7.2 configure:4617: checking host system type configure:4632: result: amd64-portbld-freebsd7.2 configure:5013: checking for a sed that does not truncate output configure:5079: result: /usr/bin/sed configure:5097: checking for grep that handles long lines and -e configure:5157: result: /usr/bin/grep configure:5162: checking for egrep configure:5226: result: /usr/bin/grep -E configure:5231: checking for fgrep configure:5295: result: /usr/bin/grep -F configure:5330: checking for ld used by cc configure:5397: result: /usr/bin/ld configure:5406: checking if the linker (/usr/bin/ld) is GNU ld configure:5421: result: yes configure:5433: checking for BSD- or MS-compatible name lister (nm) configure:5482: result: /usr/bin/nm -B configure:5600: checking the name lister (/usr/bin/nm -B) interface configure:5607: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:5610: /usr/bin/nm -B "conftest.o" configure:5613: output 0000000000000000 B some_variable configure:5620: result: BSD nm configure:5624: checking the maximum length of command line arguments configure:5744: result: 262144 configure:5761: checking whether the shell understands some XSI constructs configure:5771: result: yes configure:5775: checking whether the shell understands "+=" configure:5781: result: no configure:5816: checking for /usr/bin/ld option to reload object files configure:5823: result: -r configure:5892: checking for objdump configure:5919: result: objdump configure:5948: checking how to recognize dependent libraries configure:6144: result: pass_all configure:6204: checking for ar configure:6220: found /usr/bin/ar configure:6231: result: ar configure:6309: checking for strip configure:6325: found /usr/bin/strip configure:6336: result: strip configure:6408: checking for ranlib configure:6424: found /usr/bin/ranlib configure:6435: result: ranlib configure:6525: checking command to parse /usr/bin/nm -B output from cc object configure:6643: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:6646: $? = 0 configure:6650: /usr/bin/nm -B conftest.o \| sed -n -e 's/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p' \> conftest.nm configure:6653: $? = 0 configure:6707: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c conftstm.o >&5 configure:6710: $? = 0 configure:6748: result: ok configure:7615: checking how to run the C preprocessor configure:7655: cc -E conftest.c configure:7662: $? = 0 configure:7693: cc -E conftest.c conftest.c:10:28: error: ac_nonexistent.h: No such file or directory configure:7700: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | /* end confdefs.h. */ | #include configure:7733: result: cc -E configure:7762: cc -E conftest.c configure:7769: $? = 0 configure:7800: cc -E conftest.c conftest.c:10:28: error: ac_nonexistent.h: No such file or directory configure:7807: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | /* end confdefs.h. */ | #include configure:7847: checking for ANSI C header files configure:7877: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:7884: $? = 0 configure:7983: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:7987: $? = 0 configure:7993: ./conftest configure:7997: $? = 0 configure:8015: result: yes configure:8039: checking for sys/types.h configure:8060: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:8067: $? = 0 configure:8084: result: yes configure:8039: checking for sys/stat.h configure:8060: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:8067: $? = 0 configure:8084: result: yes configure:8039: checking for stdlib.h configure:8060: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:8067: $? = 0 configure:8084: result: yes configure:8039: checking for string.h configure:8060: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:8067: $? = 0 configure:8084: result: yes configure:8039: checking for memory.h configure:8060: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:8067: $? = 0 configure:8084: result: yes configure:8039: checking for strings.h configure:8060: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:8067: $? = 0 configure:8084: result: yes configure:8039: checking for inttypes.h configure:8060: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:8067: $? = 0 configure:8084: result: yes configure:8039: checking for stdint.h configure:8060: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:8067: $? = 0 configure:8084: result: yes configure:8039: checking for unistd.h configure:8060: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:8067: $? = 0 configure:8084: result: yes configure:8102: checking for dlfcn.h configure:8123: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:8130: $? = 0 configure:8147: result: yes configure:8301: checking for objdir configure:8316: result: .libs configure:8608: checking if cc supports -fno-rtti -fno-exceptions configure:8626: cc -c -O2 -fno-strict-aliasing -pipe -fno-rtti -fno-exceptions conftest.c >&5 cc1: warning: command line option "-fno-rtti" is valid for C++/ObjC++ but not for C configure:8630: $? = 0 configure:8643: result: no configure:8663: checking for cc option to produce PIC configure:8935: result: -fPIC -DPIC configure:8947: checking if cc PIC flag -fPIC -DPIC works configure:8965: cc -c -O2 -fno-strict-aliasing -pipe -fPIC -DPIC -DPIC conftest.c >&5 configure:8969: $? = 0 configure:8982: result: yes configure:9006: checking if cc static flag -static works configure:9034: result: yes configure:9049: checking if cc supports -c -o file.o configure:9070: cc -c -O2 -fno-strict-aliasing -pipe -o out/conftest2.o conftest.c >&5 configure:9074: $? = 0 configure:9096: result: yes configure:9104: checking if cc supports -c -o file.o configure:9151: result: yes configure:9184: checking whether the cc linker (/usr/bin/ld) supports shared libraries configure:10258: result: yes configure:10295: checking whether -lc should be explicitly linked in configure:10300: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:10303: $? = 0 configure:10318: cc -shared conftest.o -v -Wl,-soname -Wl,conftest -o conftest 2\>\&1 \| /usr/bin/grep -lc \>/dev/null 2\>\&1 configure:10321: $? = 0 configure:10333: result: no configure:10497: checking dynamic linker characteristics configure:11183: result: freebsd7.2 ld.so configure:11285: checking how to hardcode library paths into programs configure:11310: result: immediate configure:12143: checking whether stripping libraries is possible configure:12148: result: yes configure:12183: checking if libtool supports shared libraries configure:12185: result: yes configure:12188: checking whether to build shared libraries configure:12209: result: yes configure:12212: checking whether to build static libraries configure:12216: result: no configure:12257: checking for bash configure:12275: found /usr/local/bin/bash configure:12287: result: /usr/local/bin/bash configure:12295: checking if dolt supports this host configure:12322: result: yes, replacing libtool configure:12448: checking whether make sets $(MAKE) configure:12470: result: yes configure:12528: checking for pkg-config configure:12546: found /usr/local/bin/pkg-config configure:12558: result: /usr/local/bin/pkg-config configure:12583: checking pkg-config is at least version 0.9.0 configure:12586: result: yes configure:12599: checking for flex configure:12615: found /usr/bin/flex configure:12626: result: flex configure:12663: flex conftest.l configure:12667: $? = 0 configure:12669: checking lex output file root configure:12685: result: lex.yy configure:12690: checking lex library configure:12709: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.l: In function 'yylex': conftest.l:6: warning: comparison between pointer and integer conftest.l:6: warning: assignment makes pointer from integer without a cast /var/tmp//ccRorCRd.o(.text+0x8bd): In function `input': : undefined reference to `yywrap' /var/tmp//ccRorCRd.o(.text+0xdb3): In function `yylex': : undefined reference to `yywrap' /var/tmp//ccRorCRd.o(.text+0xf59): In function `main': : undefined reference to `yywrap' configure:12716: $? = 1 configure: failed program was: | /* A lexical scanner generated by flex */ | | /* Scanner skeleton version: | * $Header: /home/daffy/u0/vern/flex/RCS/flex.skl,v 2.91 96/09/10 16:58:48 vern Exp $ | * $FreeBSD: src/usr.bin/lex/flex.skl,v 1.8 2004/01/06 19:03:44 nectar Exp $ | */ | | #if defined(__FreeBSD__) | #include | #else | #define __unused | #endif | | #define FLEX_SCANNER | #define YY_FLEX_MAJOR_VERSION 2 | #define YY_FLEX_MINOR_VERSION 5 | | #include | | | /* cfront 1.2 defines "c_plusplus" instead of "__cplusplus" */ | #ifdef c_plusplus | #ifndef __cplusplus | #define __cplusplus | #endif | #endif | | | #ifdef __cplusplus | | #include | #include | | /* Use prototypes in function declarations. */ | #define YY_USE_PROTOS | | /* The "const" storage-class-modifier is valid. */ | #define YY_USE_CONST | | #else /* ! __cplusplus */ | | #if __STDC__ | | #define YY_USE_PROTOS | #define YY_USE_CONST | | #endif /* __STDC__ */ | #endif /* ! __cplusplus */ | | #ifdef __TURBOC__ | #pragma warn -rch | #pragma warn -use | #include | #include | #define YY_USE_CONST | #define YY_USE_PROTOS | #endif | | #ifdef YY_USE_CONST | #define yyconst const | #else | #define yyconst | #endif | | | #ifdef YY_USE_PROTOS | #define YY_PROTO(proto) proto | #else | #define YY_PROTO(proto) () | #endif | | /* Returned upon end-of-file. */ | #define YY_NULL 0 | | /* Promotes a possibly negative, possibly signed char to an unsigned | * integer for use as an array index. If the signed char is negative, | * we want to instead treat it as an 8-bit unsigned char, hence the | * double cast. | */ | #define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) | | /* Enter a start condition. This macro really ought to take a parameter, | * but we do it the disgusting crufty way forced on us by the ()-less | * definition of BEGIN. | */ | #define BEGIN yy_start = 1 + 2 * | | /* Translate the current start state into a value that can be later handed | * to BEGIN to return to the state. The YYSTATE alias is for lex | * compatibility. | */ | #define YY_START ((yy_start - 1) / 2) | #define YYSTATE YY_START | | /* Action number for EOF rule of a given start state. */ | #define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) | | /* Special action meaning "start processing a new file". */ | #define YY_NEW_FILE yyrestart( yyin ) | | #define YY_END_OF_BUFFER_CHAR 0 | | /* Size of default input buffer. */ | #define YY_BUF_SIZE 16384 | | typedef struct yy_buffer_state *YY_BUFFER_STATE; | | extern int yyleng; | extern FILE *yyin, *yyout; | | #define EOB_ACT_CONTINUE_SCAN 0 | #define EOB_ACT_END_OF_FILE 1 | #define EOB_ACT_LAST_MATCH 2 | | /* The funky do-while in the following #define is used to turn the definition | * int a single C statement (which needs a semi-colon terminator). This | * avoids problems with code like: | * | * if ( condition_holds ) | * yyless( 5 ); | * else | * do_something_else(); | * | * Prior to using the do-while the compiler would get upset at the | * "else" because it interpreted the "if" statement as being all | * done when it reached the ';' after the yyless() call. | */ | | /* Return all but the first 'n' matched characters back to the input stream. */ | | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | *yy_cp = yy_hold_char; \ | YY_RESTORE_YY_MORE_OFFSET \ | yy_c_buf_p = yy_cp = yy_bp + n - YY_MORE_ADJ; \ | YY_DO_BEFORE_ACTION; /* set up yytext again */ \ | } \ | while ( 0 ) | | #define unput(c) yyunput( c, yytext_ptr ) | | /* The following is because we cannot portably get our hands on size_t | * (without autoconf's help, which isn't available because we want | * flex-generated scanners to compile on their own). | */ | typedef unsigned int yy_size_t; | | | struct yy_buffer_state | { | FILE *yy_input_file; | | char *yy_ch_buf; /* input buffer */ | char *yy_buf_pos; /* current position in input buffer */ | | /* Size of input buffer in bytes, not including room for EOB | * characters. | */ | yy_size_t yy_buf_size; | | /* Number of characters read into yy_ch_buf, not including EOB | * characters. | */ | int yy_n_chars; | | /* Whether we "own" the buffer - i.e., we know we created it, | * and can realloc() it to grow it, and should free() it to | * delete it. | */ | int yy_is_our_buffer; | | /* Whether this is an "interactive" input source; if so, and | * if we're using stdio for input, then we want to use getc() | * instead of fread(), to make sure we stop fetching input after | * each newline. | */ | int yy_is_interactive; | | /* Whether we're considered to be at the beginning of a line. | * If so, '^' rules will be active on the next match, otherwise | * not. | */ | int yy_at_bol; | | /* Whether to try to fill the input buffer when we reach the | * end of it. | */ | int yy_fill_buffer; | | int yy_buffer_status; | #define YY_BUFFER_NEW 0 | #define YY_BUFFER_NORMAL 1 | /* When an EOF's been seen but there's still some text to process | * then we mark the buffer as YY_EOF_PENDING, to indicate that we | * shouldn't try reading from the input source any more. We might | * still have a bunch of tokens to match, though, because of | * possible backing-up. | * | * When we actually see the EOF, we change the status to "new" | * (via yyrestart()), so that the user can continue scanning by | * just pointing yyin at a new input file. | */ | #define YY_BUFFER_EOF_PENDING 2 | }; | | static YY_BUFFER_STATE yy_current_buffer = 0; | | /* We provide macros for accessing buffer states in case in the | * future we want to put the buffer states in a more general | * "scanner state". | */ | #define YY_CURRENT_BUFFER yy_current_buffer | | | /* yy_hold_char holds the character lost when yytext is formed. */ | static char yy_hold_char; | | static int yy_n_chars; /* number of characters read into yy_ch_buf */ | | | int yyleng; | | /* Points to current character in buffer. */ | static char *yy_c_buf_p = (char *) 0; | static int yy_init = 1; /* whether we need to initialize */ | static int yy_start = 0; /* start state number */ | | /* Flag which is used to allow yywrap()'s to do buffer switches | * instead of setting up a fresh yyin. A bit of a hack ... | */ | static int yy_did_buffer_switch_on_eof; | | void yyrestart YY_PROTO(( FILE *input_file )); | | void yy_switch_to_buffer YY_PROTO(( YY_BUFFER_STATE new_buffer )); | void yy_load_buffer_state YY_PROTO(( void )); | YY_BUFFER_STATE yy_create_buffer YY_PROTO(( FILE *file, int size )); | void yy_delete_buffer YY_PROTO(( YY_BUFFER_STATE b )); | void yy_init_buffer YY_PROTO(( YY_BUFFER_STATE b, FILE *file )); | void yy_flush_buffer YY_PROTO(( YY_BUFFER_STATE b )); | #define YY_FLUSH_BUFFER yy_flush_buffer( yy_current_buffer ) | | YY_BUFFER_STATE yy_scan_buffer YY_PROTO(( char *base, yy_size_t size )); | YY_BUFFER_STATE yy_scan_string YY_PROTO(( yyconst char *yy_str )); | YY_BUFFER_STATE yy_scan_bytes YY_PROTO(( yyconst char *bytes, int len )); | | static void *yy_flex_alloc YY_PROTO(( yy_size_t )); | static void *yy_flex_realloc YY_PROTO(( void *, yy_size_t )) __unused; | static void yy_flex_free YY_PROTO(( void * )); | | #define yy_new_buffer yy_create_buffer | | #define yy_set_interactive(is_interactive) \ | { \ | if ( ! yy_current_buffer ) \ | yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \ | yy_current_buffer->yy_is_interactive = is_interactive; \ | } | | #define yy_set_bol(at_bol) \ | { \ | if ( ! yy_current_buffer ) \ | yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); \ | yy_current_buffer->yy_at_bol = at_bol; \ | } | | #define YY_AT_BOL() (yy_current_buffer->yy_at_bol) | | | #define YY_USES_REJECT | typedef unsigned char YY_CHAR; | FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; | typedef int yy_state_type; | extern char *yytext; | #define yytext_ptr yytext | | static yy_state_type yy_get_previous_state YY_PROTO(( void )); | static yy_state_type yy_try_NUL_trans YY_PROTO(( yy_state_type current_state )); | static int yy_get_next_buffer YY_PROTO(( void )); | static void yy_fatal_error YY_PROTO(( yyconst char msg[] )); | | /* Done after the current pattern has been matched and before the | * corresponding action - sets up yytext. | */ | #define YY_DO_BEFORE_ACTION \ | yytext_ptr = yy_bp; \ | yytext_ptr -= yy_more_len; \ | yyleng = (int) (yy_cp - yytext_ptr); \ | yy_hold_char = *yy_cp; \ | *yy_cp = '\0'; \ | yy_c_buf_p = yy_cp; | | #define YY_NUM_RULES 8 | #define YY_END_OF_BUFFER 9 | static yyconst short int yy_acclist[23] = | { 0, | 9, 7, 8, 8, 1, 7, 8, 2, 7, 8, | 3, 7, 8, 4, 7, 8, 5, 7, 8, 6, | 7, 8 | } ; | | static yyconst short int yy_accept[14] = | { 0, | 1, 1, 1, 2, 4, 5, 8, 11, 14, 17, | 20, 23, 23 | } ; | | static yyconst int yy_ec[256] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 3, 4, 5, 6, | | 7, 8, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, | 1, 1, 1, 1, 1 | } ; | | static yyconst int yy_meta[9] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1 | } ; | | static yyconst short int yy_base[13] = | { 0, | 0, 0, 9, 10, 10, 10, 10, 10, 10, 10, | 10, 10 | } ; | | static yyconst short int yy_def[13] = | { 0, | 12, 1, 12, 12, 12, 12, 12, 12, 12, 12, | 12, 0 | } ; | | static yyconst short int yy_nxt[19] = | { 0, | 4, 5, 6, 7, 8, 9, 10, 11, 12, 3, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static yyconst short int yy_chk[19] = | { 0, | 1, 1, 1, 1, 1, 1, 1, 1, 3, 12, | 12, 12, 12, 12, 12, 12, 12, 12 | } ; | | static yy_state_type yy_state_buf[YY_BUF_SIZE + 2], *yy_state_ptr; | static char *yy_full_match; | static int yy_lp; | #define REJECT \ | { \ | *yy_cp = yy_hold_char; /* undo effects of setting up yytext */ \ | yy_cp = yy_full_match; /* restore poss. backed-over text */ \ | ++yy_lp; \ | goto find_rule; \ | } | static int yy_more_flag = 0; | static int yy_more_len = 0; | #define yymore() (yy_more_flag = 1) | #define YY_MORE_ADJ yy_more_len | #define YY_RESTORE_YY_MORE_OFFSET | char *yytext; | #line 1 "conftest.l" | #define INITIAL 0 | #line 390 "lex.yy.c" | | /* Macros after this point can all be overridden by user definitions in | * section 1. | */ | | #ifndef YY_SKIP_YYWRAP | #ifdef __cplusplus | extern "C" int yywrap YY_PROTO(( void )); | #else | extern int yywrap YY_PROTO(( void )); | #endif | #endif | | #ifndef YY_NO_UNPUT | static void yyunput YY_PROTO(( int c, char *buf_ptr )); | #endif | | #ifndef yytext_ptr | static void yy_flex_strncpy YY_PROTO(( char *, yyconst char *, int )); | #endif | | #ifdef YY_NEED_STRLEN | static int yy_flex_strlen YY_PROTO(( yyconst char * )); | #endif | | #ifndef YY_NO_INPUT | #ifdef __cplusplus | static int yyinput YY_PROTO(( void )); | #else | static int input YY_PROTO(( void )); | #endif | #endif | | #if YY_STACK_USED | static int yy_start_stack_ptr = 0; | static int yy_start_stack_depth = 0; | static int *yy_start_stack = 0; | #ifndef YY_NO_PUSH_STATE | static void yy_push_state YY_PROTO(( int new_state )); | #endif | #ifndef YY_NO_POP_STATE | static void yy_pop_state YY_PROTO(( void )); | #endif | #ifndef YY_NO_TOP_STATE | static int yy_top_state YY_PROTO(( void )); | #endif | | #else | #define YY_NO_PUSH_STATE 1 | #define YY_NO_POP_STATE 1 | #define YY_NO_TOP_STATE 1 | #endif | | #ifdef YY_MALLOC_DECL | YY_MALLOC_DECL | #else | #if __STDC__ | #ifndef __cplusplus | #include | #endif | #else | /* Just try to get by without declaring the routines. This will fail | * miserably on non-ANSI systems for which sizeof(size_t) != sizeof(int) | * or sizeof(void*) != sizeof(int). | */ | #endif | #endif | | /* Amount of stuff to slurp up with each read. */ | #ifndef YY_READ_BUF_SIZE | #define YY_READ_BUF_SIZE 8192 | #endif | | /* Copy whatever the last rule matched to the standard output. */ | | #ifndef ECHO | /* This used to be an fputs(), but since the string might contain NUL's, | * we now use fwrite(). | */ | #define ECHO (void) fwrite( yytext, yyleng, 1, yyout ) | #endif | | /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, | * is returned in "result". | */ | #ifndef YY_INPUT | #define YY_INPUT(buf,result,max_size) \ | if ( yy_current_buffer->yy_is_interactive ) \ | { \ | int c = '*', n; \ | for ( n = 0; n < max_size && \ | (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ | buf[n] = (char) c; \ | if ( c == '\n' ) \ | buf[n++] = (char) c; \ | if ( c == EOF && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); \ | result = n; \ | } \ | else if ( ((result = fread( buf, 1, max_size, yyin )) == 0) \ | && ferror( yyin ) ) \ | YY_FATAL_ERROR( "input in flex scanner failed" ); | #endif | | /* No semi-colon after return; correct usage is to write "yyterminate();" - | * we don't want an extra ';' after the "return" because that will cause | * some compilers to complain about unreachable statements. | */ | #ifndef yyterminate | #define yyterminate() return YY_NULL | #endif | | /* Number of entries by which start-condition stack grows. */ | #ifndef YY_START_STACK_INCR | #define YY_START_STACK_INCR 25 | #endif | | /* Report a fatal error. */ | #ifndef YY_FATAL_ERROR | #define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) | #endif | | /* Default declaration of generated scanner - a define so the user can | * easily add parameters. | */ | #ifndef YY_DECL | #define YY_DECL int yylex YY_PROTO(( void )) | #endif | | /* Code executed at the beginning of each rule, after yytext and yyleng | * have been set up. | */ | #ifndef YY_USER_ACTION | #define YY_USER_ACTION | #endif | | /* Code executed at the end of each rule. */ | #ifndef YY_BREAK | #define YY_BREAK break; | #endif | | #define YY_RULE_SETUP \ | YY_USER_ACTION | | YY_DECL | { | register yy_state_type yy_current_state; | register char *yy_cp, *yy_bp; | register int yy_act; | | #line 1 "conftest.l" | | #line 543 "lex.yy.c" | | if ( yy_init ) | { | yy_init = 0; | | #ifdef YY_USER_INIT | YY_USER_INIT; | #endif | | if ( ! yy_start ) | yy_start = 1; /* first start state */ | | if ( ! yyin ) | yyin = stdin; | | if ( ! yyout ) | yyout = stdout; | | if ( ! yy_current_buffer ) | yy_current_buffer = | yy_create_buffer( yyin, YY_BUF_SIZE ); | | yy_load_buffer_state(); | } | | while ( 1 ) /* loops until end-of-file is reached */ | { | yy_more_len = 0; | if ( yy_more_flag ) | { | yy_more_len = yy_c_buf_p - yytext_ptr; | yy_more_flag = 0; | } | yy_cp = yy_c_buf_p; | | /* Support of yytext. */ | *yy_cp = yy_hold_char; | | /* yy_bp points to the position in yy_ch_buf of the start of | * the current run. | */ | yy_bp = yy_cp; | | yy_current_state = yy_start; | yy_state_ptr = yy_state_buf; | *yy_state_ptr++ = yy_current_state; | yy_match: | do | { | register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)]; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *yy_state_ptr++ = yy_current_state; | ++yy_cp; | } | while ( yy_base[yy_current_state] != 10 ); | | yy_find_action: | yy_current_state = *--yy_state_ptr; | yy_lp = yy_accept[yy_current_state]; | goto find_rule; /* avoid `defined but not used' warning */ | find_rule: /* we branch to this label when backing up */ | for ( ; ; ) /* until we find what rule we matched */ | { | if ( yy_lp && yy_lp < yy_accept[yy_current_state + 1] ) | { | yy_act = yy_acclist[yy_lp]; | { | yy_full_match = yy_cp; | break; | } | } | --yy_cp; | yy_current_state = *--yy_state_ptr; | yy_lp = yy_accept[yy_current_state]; | } | | YY_DO_BEFORE_ACTION; | | | do_action: /* This label is used only to access EOF actions. */ | | | switch ( yy_act ) | { /* beginning of action switch */ | case 1: | YY_RULE_SETUP | #line 2 "conftest.l" | { ECHO; } | YY_BREAK | case 2: | YY_RULE_SETUP | #line 3 "conftest.l" | { REJECT; } | YY_BREAK | case 3: | YY_RULE_SETUP | #line 4 "conftest.l" | { yymore (); } | YY_BREAK | case 4: | YY_RULE_SETUP | #line 5 "conftest.l" | { yyless (1); } | YY_BREAK | case 5: | YY_RULE_SETUP | #line 6 "conftest.l" | { yyless (input () != 0); } | YY_BREAK | case 6: | YY_RULE_SETUP | #line 7 "conftest.l" | { unput (yytext[0]); } | YY_BREAK | case 7: | YY_RULE_SETUP | #line 8 "conftest.l" | { BEGIN INITIAL; } | YY_BREAK | case 8: | YY_RULE_SETUP | #line 9 "conftest.l" | ECHO; | YY_BREAK | #line 674 "lex.yy.c" | case YY_STATE_EOF(INITIAL): | yyterminate(); | | case YY_END_OF_BUFFER: | { | /* Amount of text matched not including the EOB char. */ | int yy_amount_of_matched_text = (int) (yy_cp - yytext_ptr) - 1; | | /* Undo the effects of YY_DO_BEFORE_ACTION. */ | *yy_cp = yy_hold_char; | YY_RESTORE_YY_MORE_OFFSET | | if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_NEW ) | { | /* We're scanning a new file or input source. It's | * possible that this happened because the user | * just pointed yyin at a new source and called | * yylex(). If so, then we have to assure | * consistency between yy_current_buffer and our | * globals. Here is the right place to do so, because | * this is the first action (other than possibly a | * back-up) that will match for the new input source. | */ | yy_n_chars = yy_current_buffer->yy_n_chars; | yy_current_buffer->yy_input_file = yyin; | yy_current_buffer->yy_buffer_status = YY_BUFFER_NORMAL; | } | | /* Note that here we test for yy_c_buf_p "<=" to the position | * of the first EOB in the buffer, since yy_c_buf_p will | * already have been incremented past the NUL character | * (since all states make transitions on EOB to the | * end-of-buffer state). Contrast this with the test | * in input(). | */ | if ( yy_c_buf_p <= &yy_current_buffer->yy_ch_buf[yy_n_chars] ) | { /* This was really a NUL. */ | yy_state_type yy_next_state; | | yy_c_buf_p = yytext_ptr + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state(); | | /* Okay, we're now positioned to make the NUL | * transition. We couldn't have | * yy_get_previous_state() go ahead and do it | * for us because it doesn't know how to deal | * with the possibility of jamming (and we don't | * want to build jamming into it because then it | * will run more slowly). | */ | | yy_next_state = yy_try_NUL_trans( yy_current_state ); | | yy_bp = yytext_ptr + YY_MORE_ADJ; | | if ( yy_next_state ) | { | /* Consume the NUL. */ | yy_cp = ++yy_c_buf_p; | yy_current_state = yy_next_state; | goto yy_match; | } | | else | { | yy_cp = yy_c_buf_p; | goto yy_find_action; | } | } | | else switch ( yy_get_next_buffer() ) | { | case EOB_ACT_END_OF_FILE: | { | yy_did_buffer_switch_on_eof = 0; | | if ( yywrap() ) | { | /* Note: because we've taken care in | * yy_get_next_buffer() to have set up | * yytext, we can now set up | * yy_c_buf_p so that if some total | * hoser (like flex itself) wants to | * call the scanner after we return the | * YY_NULL, it'll still work - another | * YY_NULL will get returned. | */ | yy_c_buf_p = yytext_ptr + YY_MORE_ADJ; | | yy_act = YY_STATE_EOF(YY_START); | goto do_action; | } | | else | { | if ( ! yy_did_buffer_switch_on_eof ) | YY_NEW_FILE; | } | break; | } | | case EOB_ACT_CONTINUE_SCAN: | yy_c_buf_p = | yytext_ptr + yy_amount_of_matched_text; | | yy_current_state = yy_get_previous_state(); | | yy_cp = yy_c_buf_p; | yy_bp = yytext_ptr + YY_MORE_ADJ; | goto yy_match; | | case EOB_ACT_LAST_MATCH: | yy_c_buf_p = | &yy_current_buffer->yy_ch_buf[yy_n_chars]; | | yy_current_state = yy_get_previous_state(); | | yy_cp = yy_c_buf_p; | yy_bp = yytext_ptr + YY_MORE_ADJ; | goto yy_find_action; | } | break; | } | | default: | YY_FATAL_ERROR( | "fatal flex scanner internal error--no action found" ); | } /* end of action switch */ | } /* end of scanning one token */ | } /* end of yylex */ | | | /* yy_get_next_buffer - try to read in a new buffer | * | * Returns a code representing an action: | * EOB_ACT_LAST_MATCH - | * EOB_ACT_CONTINUE_SCAN - continue scanning from current position | * EOB_ACT_END_OF_FILE - end of file | */ | | static int yy_get_next_buffer() | { | register char *dest = yy_current_buffer->yy_ch_buf; | register char *source = yytext_ptr; | register int number_to_move, i; | int ret_val; | | if ( yy_c_buf_p > &yy_current_buffer->yy_ch_buf[yy_n_chars + 1] ) | YY_FATAL_ERROR( | "fatal flex scanner internal error--end of buffer missed" ); | | if ( yy_current_buffer->yy_fill_buffer == 0 ) | { /* Don't try to fill the buffer, so this is an EOF. */ | if ( yy_c_buf_p - yytext_ptr - YY_MORE_ADJ == 1 ) | { | /* We matched a single character, the EOB, so | * treat this as a final EOF. | */ | return EOB_ACT_END_OF_FILE; | } | | else | { | /* We matched some text prior to the EOB, first | * process it. | */ | return EOB_ACT_LAST_MATCH; | } | } | | /* Try to read more data. */ | | /* First move last chars to start of buffer. */ | number_to_move = (int) (yy_c_buf_p - yytext_ptr) - 1; | | for ( i = 0; i < number_to_move; ++i ) | *(dest++) = *(source++); | | if ( yy_current_buffer->yy_buffer_status == YY_BUFFER_EOF_PENDING ) | /* don't do the read, it's not guaranteed to return an EOF, | * just force an EOF | */ | yy_current_buffer->yy_n_chars = yy_n_chars = 0; | | else | { | int num_to_read = | yy_current_buffer->yy_buf_size - number_to_move - 1; | | while ( num_to_read <= 0 ) | { /* Not enough room in the buffer - grow it. */ | #ifdef YY_USES_REJECT | YY_FATAL_ERROR( | "input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); | #else | | /* just a shorter name for the current buffer */ | YY_BUFFER_STATE b = yy_current_buffer; | | int yy_c_buf_p_offset = | (int) (yy_c_buf_p - b->yy_ch_buf); | | if ( b->yy_is_our_buffer ) | { | int new_size = b->yy_buf_size * 2; | | if ( new_size <= 0 ) | b->yy_buf_size += b->yy_buf_size / 8; | else | b->yy_buf_size *= 2; | | b->yy_ch_buf = (char *) | /* Include room in for 2 EOB chars. */ | yy_flex_realloc( (void *) b->yy_ch_buf, | b->yy_buf_size + 2 ); | } | else | /* Can't grow it, we don't own it. */ | b->yy_ch_buf = 0; | | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( | "fatal error - scanner input buffer overflow" ); | | yy_c_buf_p = &b->yy_ch_buf[yy_c_buf_p_offset]; | | num_to_read = yy_current_buffer->yy_buf_size - | number_to_move - 1; | #endif | } | | if ( num_to_read > YY_READ_BUF_SIZE ) | num_to_read = YY_READ_BUF_SIZE; | | /* Read in more data. */ | YY_INPUT( (&yy_current_buffer->yy_ch_buf[number_to_move]), | yy_n_chars, num_to_read ); | | yy_current_buffer->yy_n_chars = yy_n_chars; | } | | if ( yy_n_chars == 0 ) | { | if ( number_to_move == YY_MORE_ADJ ) | { | ret_val = EOB_ACT_END_OF_FILE; | yyrestart( yyin ); | } | | else | { | ret_val = EOB_ACT_LAST_MATCH; | yy_current_buffer->yy_buffer_status = | YY_BUFFER_EOF_PENDING; | } | } | | else | ret_val = EOB_ACT_CONTINUE_SCAN; | | yy_n_chars += number_to_move; | yy_current_buffer->yy_ch_buf[yy_n_chars] = YY_END_OF_BUFFER_CHAR; | yy_current_buffer->yy_ch_buf[yy_n_chars + 1] = YY_END_OF_BUFFER_CHAR; | | yytext_ptr = &yy_current_buffer->yy_ch_buf[0]; | | return ret_val; | } | | | /* yy_get_previous_state - get the state just before the EOB char was reached */ | | static yy_state_type yy_get_previous_state() | { | register yy_state_type yy_current_state; | register char *yy_cp; | | yy_current_state = yy_start; | yy_state_ptr = yy_state_buf; | *yy_state_ptr++ = yy_current_state; | | for ( yy_cp = yytext_ptr + YY_MORE_ADJ; yy_cp < yy_c_buf_p; ++yy_cp ) | { | register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | *yy_state_ptr++ = yy_current_state; | } | | return yy_current_state; | } | | | /* yy_try_NUL_trans - try to make a transition on the NUL character | * | * synopsis | * next_state = yy_try_NUL_trans( current_state ); | */ | | #ifdef YY_USE_PROTOS | static yy_state_type yy_try_NUL_trans( yy_state_type yy_current_state ) | #else | static yy_state_type yy_try_NUL_trans( yy_current_state ) | yy_state_type yy_current_state; | #endif | { | register int yy_is_jam; | | register YY_CHAR yy_c = 1; | while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) | { | yy_current_state = (int) yy_def[yy_current_state]; | if ( yy_current_state >= 13 ) | yy_c = yy_meta[(unsigned int) yy_c]; | } | yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; | yy_is_jam = (yy_current_state == 12); | if ( ! yy_is_jam ) | *yy_state_ptr++ = yy_current_state; | | return yy_is_jam ? 0 : yy_current_state; | } | | | #ifndef YY_NO_UNPUT | #ifdef YY_USE_PROTOS | static void yyunput( int c, register char *yy_bp ) | #else | static void yyunput( c, yy_bp ) | int c; | register char *yy_bp; | #endif | { | register char *yy_cp = yy_c_buf_p; | | /* undo effects of setting up yytext */ | *yy_cp = yy_hold_char; | | if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 ) | { /* need to shift things up to make room */ | /* +2 for EOB chars. */ | register int number_to_move = yy_n_chars + 2; | register char *dest = &yy_current_buffer->yy_ch_buf[ | yy_current_buffer->yy_buf_size + 2]; | register char *source = | &yy_current_buffer->yy_ch_buf[number_to_move]; | | while ( source > yy_current_buffer->yy_ch_buf ) | *--dest = *--source; | | yy_cp += (int) (dest - source); | yy_bp += (int) (dest - source); | yy_current_buffer->yy_n_chars = | yy_n_chars = yy_current_buffer->yy_buf_size; | | if ( yy_cp < yy_current_buffer->yy_ch_buf + 2 ) | YY_FATAL_ERROR( "flex scanner push-back overflow" ); | } | | *--yy_cp = (char) c; | | | yytext_ptr = yy_bp; | yy_hold_char = *yy_cp; | yy_c_buf_p = yy_cp; | } | #endif /* ifndef YY_NO_UNPUT */ | | | #ifdef __cplusplus | static int yyinput() | #else | static int input() | #endif | { | int c; | | *yy_c_buf_p = yy_hold_char; | | if ( *yy_c_buf_p == YY_END_OF_BUFFER_CHAR ) | { | /* yy_c_buf_p now points to the character we want to return. | * If this occurs *before* the EOB characters, then it's a | * valid NUL; if not, then we've hit the end of the buffer. | */ | if ( yy_c_buf_p < &yy_current_buffer->yy_ch_buf[yy_n_chars] ) | /* This was really a NUL. */ | *yy_c_buf_p = '\0'; | | else | { /* need more input */ | int offset = yy_c_buf_p - yytext_ptr; | ++yy_c_buf_p; | | switch ( yy_get_next_buffer() ) | { | case EOB_ACT_LAST_MATCH: | /* This happens because yy_g_n_b() | * sees that we've accumulated a | * token and flags that we need to | * try matching the token before | * proceeding. But for input(), | * there's no matching to consider. | * So convert the EOB_ACT_LAST_MATCH | * to EOB_ACT_END_OF_FILE. | */ | | /* Reset buffer status. */ | yyrestart( yyin ); | | /* fall through */ | | case EOB_ACT_END_OF_FILE: | { | if ( yywrap() ) | return EOF; | | if ( ! yy_did_buffer_switch_on_eof ) | YY_NEW_FILE; | #ifdef __cplusplus | return yyinput(); | #else | return input(); | #endif | } | | case EOB_ACT_CONTINUE_SCAN: | yy_c_buf_p = yytext_ptr + offset; | break; | } | } | } | | c = *(unsigned char *) yy_c_buf_p; /* cast for 8-bit char's */ | *yy_c_buf_p = '\0'; /* preserve yytext */ | yy_hold_char = *++yy_c_buf_p; | | | return c; | } | | | #ifdef YY_USE_PROTOS | void yyrestart( FILE *input_file ) | #else | void yyrestart( input_file ) | FILE *input_file; | #endif | { | if ( ! yy_current_buffer ) | yy_current_buffer = yy_create_buffer( yyin, YY_BUF_SIZE ); | | yy_init_buffer( yy_current_buffer, input_file ); | yy_load_buffer_state(); | } | | | #ifdef YY_USE_PROTOS | void yy_switch_to_buffer( YY_BUFFER_STATE new_buffer ) | #else | void yy_switch_to_buffer( new_buffer ) | YY_BUFFER_STATE new_buffer; | #endif | { | if ( yy_current_buffer == new_buffer ) | return; | | if ( yy_current_buffer ) | { | /* Flush out information for old buffer. */ | *yy_c_buf_p = yy_hold_char; | yy_current_buffer->yy_buf_pos = yy_c_buf_p; | yy_current_buffer->yy_n_chars = yy_n_chars; | } | | yy_current_buffer = new_buffer; | yy_load_buffer_state(); | | /* We don't actually know whether we did this switch during | * EOF (yywrap()) processing, but the only time this flag | * is looked at is after yywrap() is called, so it's safe | * to go ahead and always set it. | */ | yy_did_buffer_switch_on_eof = 1; | } | | | #ifdef YY_USE_PROTOS | void yy_load_buffer_state( void ) | #else | void yy_load_buffer_state() | #endif | { | yy_n_chars = yy_current_buffer->yy_n_chars; | yytext_ptr = yy_c_buf_p = yy_current_buffer->yy_buf_pos; | yyin = yy_current_buffer->yy_input_file; | yy_hold_char = *yy_c_buf_p; | } | | | #ifdef YY_USE_PROTOS | YY_BUFFER_STATE yy_create_buffer( FILE *file, int size ) | #else | YY_BUFFER_STATE yy_create_buffer( file, size ) | FILE *file; | int size; | #endif | { | YY_BUFFER_STATE b; | | b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_buf_size = size; | | /* yy_ch_buf has to be 2 characters longer than the size given because | * we need to put in 2 end-of-buffer characters. | */ | b->yy_ch_buf = (char *) yy_flex_alloc( b->yy_buf_size + 2 ); | if ( ! b->yy_ch_buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); | | b->yy_is_our_buffer = 1; | | yy_init_buffer( b, file ); | | return b; | } | | | #ifdef YY_USE_PROTOS | void yy_delete_buffer( YY_BUFFER_STATE b ) | #else | void yy_delete_buffer( b ) | YY_BUFFER_STATE b; | #endif | { | if ( ! b ) | return; | | if ( b == yy_current_buffer ) | yy_current_buffer = (YY_BUFFER_STATE) 0; | | if ( b->yy_is_our_buffer ) | yy_flex_free( (void *) b->yy_ch_buf ); | | yy_flex_free( (void *) b ); | } | | | #ifndef YY_ALWAYS_INTERACTIVE | #ifndef YY_NEVER_INTERACTIVE | extern int isatty YY_PROTO(( int )); | #endif | #endif | | #ifdef YY_USE_PROTOS | void yy_init_buffer( YY_BUFFER_STATE b, FILE *file ) | #else | void yy_init_buffer( b, file ) | YY_BUFFER_STATE b; | FILE *file; | #endif | | | { | yy_flush_buffer( b ); | | b->yy_input_file = file; | b->yy_fill_buffer = 1; | | #if YY_ALWAYS_INTERACTIVE | b->yy_is_interactive = 1; | #else | #if YY_NEVER_INTERACTIVE | b->yy_is_interactive = 0; | #else | b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0; | #endif | #endif | } | | | #ifdef YY_USE_PROTOS | void yy_flush_buffer( YY_BUFFER_STATE b ) | #else | void yy_flush_buffer( b ) | YY_BUFFER_STATE b; | #endif | | { | if ( ! b ) | return; | | b->yy_n_chars = 0; | | /* We always need two end-of-buffer characters. The first causes | * a transition to the end-of-buffer state. The second causes | * a jam in that state. | */ | b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; | b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; | | b->yy_buf_pos = &b->yy_ch_buf[0]; | | b->yy_at_bol = 1; | b->yy_buffer_status = YY_BUFFER_NEW; | | if ( b == yy_current_buffer ) | yy_load_buffer_state(); | } | | | #ifndef YY_NO_SCAN_BUFFER | #ifdef YY_USE_PROTOS | YY_BUFFER_STATE yy_scan_buffer( char *base, yy_size_t size ) | #else | YY_BUFFER_STATE yy_scan_buffer( base, size ) | char *base; | yy_size_t size; | #endif | { | YY_BUFFER_STATE b; | | if ( size < 2 || | base[size-2] != YY_END_OF_BUFFER_CHAR || | base[size-1] != YY_END_OF_BUFFER_CHAR ) | /* They forgot to leave room for the EOB's. */ | return 0; | | b = (YY_BUFFER_STATE) yy_flex_alloc( sizeof( struct yy_buffer_state ) ); | if ( ! b ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); | | b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ | b->yy_buf_pos = b->yy_ch_buf = base; | b->yy_is_our_buffer = 0; | b->yy_input_file = 0; | b->yy_n_chars = b->yy_buf_size; | b->yy_is_interactive = 0; | b->yy_at_bol = 1; | b->yy_fill_buffer = 0; | b->yy_buffer_status = YY_BUFFER_NEW; | | yy_switch_to_buffer( b ); | | return b; | } | #endif | | | #ifndef YY_NO_SCAN_STRING | #ifdef YY_USE_PROTOS | YY_BUFFER_STATE yy_scan_string( yyconst char *yy_str ) | #else | YY_BUFFER_STATE yy_scan_string( yy_str ) | yyconst char *yy_str; | #endif | { | int len; | for ( len = 0; yy_str[len]; ++len ) | ; | | return yy_scan_bytes( yy_str, len ); | } | #endif | | | #ifndef YY_NO_SCAN_BYTES | #ifdef YY_USE_PROTOS | YY_BUFFER_STATE yy_scan_bytes( yyconst char *bytes, int len ) | #else | YY_BUFFER_STATE yy_scan_bytes( bytes, len ) | yyconst char *bytes; | int len; | #endif | { | YY_BUFFER_STATE b; | char *buf; | yy_size_t n; | int i; | | /* Get memory for full buffer, including space for trailing EOB's. */ | n = len + 2; | buf = (char *) yy_flex_alloc( n ); | if ( ! buf ) | YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); | | for ( i = 0; i < len; ++i ) | buf[i] = bytes[i]; | | buf[len] = buf[len+1] = YY_END_OF_BUFFER_CHAR; | | b = yy_scan_buffer( buf, n ); | if ( ! b ) | YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); | | /* It's okay to grow etc. this buffer, and we should throw it | * away when we're done. | */ | b->yy_is_our_buffer = 1; | | return b; | } | #endif | | | #ifndef YY_NO_PUSH_STATE | #ifdef YY_USE_PROTOS | static void yy_push_state( int new_state ) | #else | static void yy_push_state( new_state ) | int new_state; | #endif | { | if ( yy_start_stack_ptr >= yy_start_stack_depth ) | { | yy_size_t new_size; | | yy_start_stack_depth += YY_START_STACK_INCR; | new_size = yy_start_stack_depth * sizeof( int ); | | if ( ! yy_start_stack ) | yy_start_stack = (int *) yy_flex_alloc( new_size ); | | else | yy_start_stack = (int *) yy_flex_realloc( | (void *) yy_start_stack, new_size ); | | if ( ! yy_start_stack ) | YY_FATAL_ERROR( | "out of memory expanding start-condition stack" ); | } | | yy_start_stack[yy_start_stack_ptr++] = YY_START; | | BEGIN(new_state); | } | #endif | | | #ifndef YY_NO_POP_STATE | static void yy_pop_state() | { | if ( --yy_start_stack_ptr < 0 ) | YY_FATAL_ERROR( "start-condition stack underflow" ); | | BEGIN(yy_start_stack[yy_start_stack_ptr]); | } | #endif | | | #ifndef YY_NO_TOP_STATE | static int yy_top_state() | { | return yy_start_stack[yy_start_stack_ptr - 1]; | } | #endif | | #ifndef YY_EXIT_FAILURE | #define YY_EXIT_FAILURE 2 | #endif | | #ifdef YY_USE_PROTOS | static void yy_fatal_error( yyconst char msg[] ) | #else | static void yy_fatal_error( msg ) | char msg[]; | #endif | { | (void) fprintf( stderr, "%s\n", msg ); | exit( YY_EXIT_FAILURE ); | } | | | | /* Redefine yyless() so it works in section 3 code. */ | | #undef yyless | #define yyless(n) \ | do \ | { \ | /* Undo effects of setting up yytext. */ \ | yytext[yyleng] = yy_hold_char; \ | yy_c_buf_p = yytext + n; \ | yy_hold_char = *yy_c_buf_p; \ | *yy_c_buf_p = '\0'; \ | yyleng = n; \ | } \ | while ( 0 ) | | | /* Internal utility routines. */ | | #ifndef yytext_ptr | #ifdef YY_USE_PROTOS | static void yy_flex_strncpy( char *s1, yyconst char *s2, int n ) | #else | static void yy_flex_strncpy( s1, s2, n ) | char *s1; | yyconst char *s2; | int n; | #endif | { | register int i; | for ( i = 0; i < n; ++i ) | s1[i] = s2[i]; | } | #endif | | #ifdef YY_NEED_STRLEN | #ifdef YY_USE_PROTOS | static int yy_flex_strlen( yyconst char *s ) | #else | static int yy_flex_strlen( s ) | yyconst char *s; | #endif | { | register int n; | for ( n = 0; s[n]; ++n ) | ; | | return n; | } | #endif | | | #ifdef YY_USE_PROTOS | static void *yy_flex_alloc( yy_size_t size ) | #else | static void *yy_flex_alloc( size ) | yy_size_t size; | #endif | { | return (void *) malloc( size ); | } | | #ifdef YY_USE_PROTOS | static void *yy_flex_realloc( void *ptr, yy_size_t size ) | #else | static void *yy_flex_realloc( ptr, size ) | void *ptr; | yy_size_t size; | #endif | { | /* The cast to (char *) in the following accommodates both | * implementations that use char* generic pointers, and those | * that use void* generic pointers. It works with the latter | * because both ANSI C and C++ allow castless assignment from | * any pointer type to void*, and deal with argument conversions | * as though doing an assignment. | */ | return (void *) realloc( (char *) ptr, size ); | } | | #ifdef YY_USE_PROTOS | static void yy_flex_free( void *ptr ) | #else | static void yy_flex_free( ptr ) | void *ptr; | #endif | { | free( ptr ); | } | | #if YY_MAIN | int main() | { | yylex(); | return 0; | } | #endif | #line 9 "conftest.l" | | #ifdef YYTEXT_POINTER | extern char *yytext; | #endif | int | main (void) | { | return ! yylex () + ! yywrap (); | } configure:12709: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c -lfl >&5 conftest.l: In function 'yylex': conftest.l:6: warning: comparison between pointer and integer conftest.l:6: warning: assignment makes pointer from integer without a cast configure:12716: $? = 0 configure:12740: result: -lfl configure:12746: checking whether yytext is a pointer configure:12767: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c -lfl >&5 conftest.l: In function 'yylex': conftest.l:6: warning: comparison between pointer and integer conftest.l:6: warning: assignment makes pointer from integer without a cast configure:12774: $? = 0 configure:12796: result: yes configure:12812: checking for bison configure:12828: found /usr/local/bin/bison configure:12839: result: bison -y configure:12858: checking for special C compiler options needed for large files configure:12953: result: no configure:12959: checking for _FILE_OFFSET_BITS value needed for large files configure:12994: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:13001: $? = 0 configure:13070: result: no configure:13213: checking for cpp configure:13232: found /usr/bin/cpp configure:13244: result: /usr/bin/cpp configure:13260: checking if /usr/bin/cpp requires -undef configure:13271: result: yes configure:13286: checking if /usr/bin/cpp requires -traditional configure:13297: result: yes configure:13310: checking for sed configure:13340: result: /usr/bin/sed configure:13585: checking for dirent.h that defines DIR configure:13614: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:13621: $? = 0 configure:13638: result: yes configure:13653: checking for library containing opendir configure:13694: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:13701: $? = 0 configure:13732: result: none required configure:13830: checking for ANSI C header files configure:13998: result: yes configure:14027: checking fcntl.h usability configure:14044: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:14051: $? = 0 configure:14065: result: yes configure:14069: checking fcntl.h presence configure:14084: cc -E conftest.c configure:14091: $? = 0 configure:14105: result: yes configure:14138: checking for fcntl.h configure:14147: result: yes configure:14016: checking for stdlib.h configure:14023: result: yes configure:14016: checking for string.h configure:14023: result: yes configure:14016: checking for unistd.h configure:14023: result: yes configure:14163: checking for an ANSI C-conforming const configure:14238: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:14245: $? = 0 configure:14260: result: yes configure:14271: checking whether byte ordering is bigendian configure:14296: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:30: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'a' configure:14303: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | /* end confdefs.h. */ | #ifndef __APPLE_CC__ | not a universal capable compiler | #endif | typedef int dummy; | configure:14353: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:14360: $? = 0 configure:14392: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c: In function 'main': conftest.c:36: error: 'not' undeclared (first use in this function) conftest.c:36: error: (Each undeclared identifier is reported only once conftest.c:36: error: for each function it appears in.) conftest.c:36: error: expected ';' before 'big' configure:14399: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | /* end confdefs.h. */ | #include | #include | | int | main () | { | #if BYTE_ORDER != BIG_ENDIAN | not big endian | #endif | | ; | return 0; | } configure:14651: result: no configure:14678: checking size of unsigned long configure:14983: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:14987: $? = 0 configure:14993: ./conftest configure:14997: $? = 0 configure:15023: result: 8 configure:15041: checking for pid_t configure:15069: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:15076: $? = 0 configure:15103: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c: In function 'main': conftest.c:67: error: expected expression before ')' token configure:15110: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | int | main () | { | if (sizeof ((pid_t))) | return 0; | ; | return 0; | } configure:15133: result: yes configure:15170: checking byteswap.h usability configure:15187: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:64:22: error: byteswap.h: No such file or directory configure:15194: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:15208: result: no configure:15212: checking byteswap.h presence configure:15227: cc -E conftest.c conftest.c:31:22: error: byteswap.h: No such file or directory configure:15234: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | /* end confdefs.h. */ | #include configure:15248: result: no configure:15281: checking for byteswap.h configure:15290: result: no configure:15317: checking sys/endian.h usability configure:15334: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:15341: $? = 0 configure:15355: result: yes configure:15359: checking sys/endian.h presence configure:15374: cc -E conftest.c configure:15381: $? = 0 configure:15395: result: yes configure:15428: checking for sys/endian.h configure:15435: result: yes configure:15448: checking for __swap16 variant of byteswapping macros configure:15478: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 /var/tmp//cc5SLnoV.o(.text+0xc): In function `main': : undefined reference to `__swap16' configure:15485: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | /* end confdefs.h. */ | | #include | #include | | int | main () | { | | int a = 1, b; | b = __swap16(a); | | ; | return 0; | } | configure:15504: result: no configure:15507: checking for bswap16 variant of byteswapping macros configure:15537: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:15544: $? = 0 configure:15563: result: yes configure:15602: checking for dlopen configure:15658: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:15665: $? = 0 configure:15685: result: yes configure:15766: checking for vprintf configure:15822: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:58: warning: conflicting types for built-in function 'vprintf' configure:15829: $? = 0 configure:15851: result: yes configure:15860: checking for _doprnt configure:15916: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 /var/tmp//ccWZbeRw.o(.text+0x7): In function `main': : undefined reference to `_doprnt' configure:15923: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | /* end confdefs.h. */ | /* Define _doprnt to an innocuous variant, in case declares _doprnt. | For example, HP-UX 11i declares gettimeofday. */ | #define _doprnt innocuous__doprnt | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char _doprnt (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef _doprnt | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char _doprnt (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub__doprnt || defined __stub____doprnt | choke me | #endif | | int | main () | { | return _doprnt (); | ; | return 0; | } configure:15943: result: no configure:15981: checking for geteuid configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:16044: $? = 0 configure:16066: result: yes configure:15981: checking for getuid configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:16044: $? = 0 configure:16066: result: yes configure:15981: checking for link configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:16044: $? = 0 configure:16066: result: yes configure:15981: checking for memmove configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:62: warning: conflicting types for built-in function 'memmove' configure:16044: $? = 0 configure:16066: result: yes configure:15981: checking for memset configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:63: warning: conflicting types for built-in function 'memset' configure:16044: $? = 0 configure:16066: result: yes configure:15981: checking for mkstemp configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:16044: $? = 0 configure:16066: result: yes configure:15981: checking for strchr configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:65: warning: conflicting types for built-in function 'strchr' configure:16044: $? = 0 configure:16066: result: yes configure:15981: checking for strrchr configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:66: warning: conflicting types for built-in function 'strrchr' configure:16044: $? = 0 configure:16066: result: yes configure:15981: checking for strtol configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:16044: $? = 0 configure:16066: result: yes configure:15981: checking for getopt configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:16044: $? = 0 configure:16066: result: yes configure:15981: checking for getopt_long configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:16044: $? = 0 configure:16066: result: yes configure:15981: checking for vsnprintf configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:70: warning: conflicting types for built-in function 'vsnprintf' configure:16044: $? = 0 configure:16066: result: yes configure:15981: checking for walkcontext configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 /var/tmp//ccIMGbuk.o(.text+0x7): In function `main': : undefined reference to `walkcontext' configure:16044: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | /* end confdefs.h. */ | /* Define walkcontext to an innocuous variant, in case declares walkcontext. | For example, HP-UX 11i declares gettimeofday. */ | #define walkcontext innocuous_walkcontext | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char walkcontext (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef walkcontext | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char walkcontext (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub_walkcontext || defined __stub___walkcontext | choke me | #endif | | int | main () | { | return walkcontext (); | ; | return 0; | } configure:16066: result: no configure:15981: checking for backtrace configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 /var/tmp//ccEcgF8c.o(.text+0x7): In function `main': : undefined reference to `backtrace' configure:16044: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | /* end confdefs.h. */ | /* Define backtrace to an innocuous variant, in case declares backtrace. | For example, HP-UX 11i declares gettimeofday. */ | #define backtrace innocuous_backtrace | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char backtrace (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef backtrace | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char backtrace (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub_backtrace || defined __stub___backtrace | choke me | #endif | | int | main () | { | return backtrace (); | ; | return 0; | } configure:16066: result: no configure:15981: checking for getisax configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 /var/tmp//ccxYPh73.o(.text+0x7): In function `main': : undefined reference to `getisax' configure:16044: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | /* end confdefs.h. */ | /* Define getisax to an innocuous variant, in case declares getisax. | For example, HP-UX 11i declares gettimeofday. */ | #define getisax innocuous_getisax | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char getisax (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef getisax | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char getisax (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub_getisax || defined __stub___getisax | choke me | #endif | | int | main () | { | return getisax (); | ; | return 0; | } configure:16066: result: no configure:15981: checking for getzoneid configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 /var/tmp//ccAMiPJ9.o(.text+0x7): In function `main': : undefined reference to `getzoneid' configure:16044: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | /* end confdefs.h. */ | /* Define getzoneid to an innocuous variant, in case declares getzoneid. | For example, HP-UX 11i declares gettimeofday. */ | #define getzoneid innocuous_getzoneid | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char getzoneid (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef getzoneid | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char getzoneid (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub_getzoneid || defined __stub___getzoneid | choke me | #endif | | int | main () | { | return getzoneid (); | ; | return 0; | } configure:16066: result: no configure:15981: checking for shmctl64 configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 /var/tmp//ccfIMBU8.o(.text+0x7): In function `main': : undefined reference to `shmctl64' configure:16044: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | /* end confdefs.h. */ | /* Define shmctl64 to an innocuous variant, in case declares shmctl64. | For example, HP-UX 11i declares gettimeofday. */ | #define shmctl64 innocuous_shmctl64 | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char shmctl64 (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef shmctl64 | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char shmctl64 (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub_shmctl64 || defined __stub___shmctl64 | choke me | #endif | | int | main () | { | return shmctl64 (); | ; | return 0; | } configure:16066: result: no configure:15981: checking for strcasestr configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:16044: $? = 0 configure:16066: result: yes configure:15981: checking for ffs configure:16037: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:72: warning: conflicting types for built-in function 'ffs' configure:16044: $? = 0 configure:16066: result: yes configure:16080: checking for working alloca.h configure:16107: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:50:20: error: alloca.h: No such file or directory conftest.c: In function 'main': conftest.c:54: warning: incompatible implicit declaration of built-in function 'alloca' configure:16114: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | /* end confdefs.h. */ | #include | int | main () | { | char *p = (char *) alloca (2 * sizeof (int)); | if (p) return 0; | ; | return 0; | } configure:16134: result: no configure:16144: checking for alloca configure:16191: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:16198: $? = 0 configure:16218: result: yes configure:16455: checking for getdtablesize configure:16511: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:16518: $? = 0 configure:16538: result: yes configure:16548: checking for getifaddrs configure:16604: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:16611: $? = 0 configure:16631: result: yes configure:16641: checking for getpeereid configure:16697: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:16704: $? = 0 configure:16724: result: yes configure:16734: checking for getpeerucred configure:16790: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 /var/tmp//ccURqAso.o(.text+0x7): In function `main': : undefined reference to `getpeerucred' configure:16797: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | /* end confdefs.h. */ | /* Define getpeerucred to an innocuous variant, in case declares getpeerucred. | For example, HP-UX 11i declares gettimeofday. */ | #define getpeerucred innocuous_getpeerucred | | /* System header to define __stub macros and hopefully few prototypes, | which can conflict with char getpeerucred (); below. | Prefer to if __STDC__ is defined, since | exists even on freestanding compilers. */ | | #ifdef __STDC__ | # include | #else | # include | #endif | | #undef getpeerucred | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char getpeerucred (); | /* The GNU C library defines this for functions which it implements | to always fail with ENOSYS. Some functions are actually named | something starting with __ and the normal name is an alias. */ | #if defined __stub_getpeerucred || defined __stub___getpeerucred | choke me | #endif | | int | main () | { | return getpeerucred (); | ; | return 0; | } configure:16817: result: no configure:16827: checking for strlcat configure:16883: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:16890: $? = 0 configure:16910: result: yes configure:16926: checking for strlcpy configure:16982: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:16989: $? = 0 configure:17009: result: yes configure:17029: checking for mmap configure:17085: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:17092: $? = 0 configure:17112: result: yes configure:17124: checking for sqrt in -lm configure:17159: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c -lm >&5 conftest.c:63: warning: conflicting types for built-in function 'sqrt' configure:17166: $? = 0 configure:17187: result: yes configure:17198: checking for cbrt in -lm configure:17233: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c -lm -lm >&5 conftest.c:64: warning: conflicting types for built-in function 'cbrt' configure:17240: $? = 0 configure:17261: result: yes configure:17290: checking ndbm.h usability configure:17307: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:17314: $? = 0 configure:17328: result: yes configure:17332: checking ndbm.h presence configure:17347: cc -E conftest.c configure:17354: $? = 0 configure:17368: result: yes configure:17401: checking for ndbm.h configure:17410: result: yes configure:17290: checking dbm.h usability configure:17307: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:92:17: error: dbm.h: No such file or directory configure:17314: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:17328: result: no configure:17332: checking dbm.h presence configure:17347: cc -E conftest.c conftest.c:59:17: error: dbm.h: No such file or directory configure:17354: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | /* end confdefs.h. */ | #include configure:17368: result: no configure:17401: checking for dbm.h configure:17410: result: no configure:17290: checking rpcsvc/dbm.h usability configure:17307: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:92:24: error: rpcsvc/dbm.h: No such file or directory configure:17314: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:17328: result: no configure:17332: checking rpcsvc/dbm.h presence configure:17347: cc -E conftest.c conftest.c:59:24: error: rpcsvc/dbm.h: No such file or directory configure:17354: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | /* end confdefs.h. */ | #include configure:17368: result: no configure:17401: checking for rpcsvc/dbm.h configure:17410: result: no configure:17443: checking linux/agpgart.h usability configure:17460: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:92:27: error: linux/agpgart.h: No such file or directory configure:17467: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:17481: result: no configure:17485: checking linux/agpgart.h presence configure:17500: cc -E conftest.c conftest.c:59:27: error: linux/agpgart.h: No such file or directory configure:17507: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | /* end confdefs.h. */ | #include configure:17521: result: no configure:17554: checking for linux/agpgart.h configure:17563: result: no configure:17443: checking sys/agpio.h usability configure:17460: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:17467: $? = 0 configure:17481: result: yes configure:17485: checking sys/agpio.h presence configure:17500: cc -E conftest.c configure:17507: $? = 0 configure:17521: result: yes configure:17554: checking for sys/agpio.h configure:17563: result: yes configure:17603: checking linux/apm_bios.h usability configure:17620: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:93:28: error: linux/apm_bios.h: No such file or directory configure:17627: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | #define HAVE_SYS_AGPIO_H 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:17641: result: no configure:17645: checking linux/apm_bios.h presence configure:17660: cc -E conftest.c conftest.c:60:28: error: linux/apm_bios.h: No such file or directory configure:17667: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | #define HAVE_SYS_AGPIO_H 1 | /* end confdefs.h. */ | #include configure:17681: result: no configure:17714: checking for linux/apm_bios.h configure:17723: result: no configure:17763: checking linux/fb.h usability configure:17780: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:93:22: error: linux/fb.h: No such file or directory configure:17787: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | #define HAVE_SYS_AGPIO_H 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:17801: result: no configure:17805: checking linux/fb.h presence configure:17820: cc -E conftest.c conftest.c:60:22: error: linux/fb.h: No such file or directory configure:17827: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | #define HAVE_SYS_AGPIO_H 1 | /* end confdefs.h. */ | #include configure:17841: result: no configure:17874: checking for linux/fb.h configure:17883: result: no configure:17923: checking asm/mtrr.h usability configure:17940: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:93:22: error: asm/mtrr.h: No such file or directory configure:17947: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | #define HAVE_SYS_AGPIO_H 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:17961: result: no configure:17965: checking asm/mtrr.h presence configure:17980: cc -E conftest.c conftest.c:60:22: error: asm/mtrr.h: No such file or directory configure:17987: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | #define HAVE_SYS_AGPIO_H 1 | /* end confdefs.h. */ | #include configure:18001: result: no configure:18034: checking for asm/mtrr.h configure:18043: result: no configure:18078: checking sys/memrange.h usability configure:18095: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:18102: $? = 0 configure:18116: result: yes configure:18120: checking sys/memrange.h presence configure:18135: cc -E conftest.c configure:18142: $? = 0 configure:18156: result: yes configure:18189: checking for sys/memrange.h configure:18198: result: yes configure:18241: checking machine/mtrr.h usability configure:18258: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:95:26: error: machine/mtrr.h: No such file or directory configure:18265: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | #define HAVE_SYS_AGPIO_H 1 | #define HAVE_SYS_MEMRANGE_H 1 | #define HAS_MTRR_SUPPORT 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:18279: result: no configure:18283: checking machine/mtrr.h presence configure:18298: cc -E conftest.c conftest.c:62:26: error: machine/mtrr.h: No such file or directory configure:18305: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | #define HAVE_SYS_AGPIO_H 1 | #define HAVE_SYS_MEMRANGE_H 1 | #define HAS_MTRR_SUPPORT 1 | /* end confdefs.h. */ | #include configure:18319: result: no configure:18352: checking for machine/mtrr.h configure:18361: result: no configure:18388: checking for sys/linker.h configure:18409: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:18416: $? = 0 configure:18433: result: yes configure:18457: checking for SYSV IPC configure:18493: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c -lm >&5 configure:18500: $? = 0 configure:18520: result: yes configure:18548: checking machine/apmvar.h usability configure:18565: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:97:28: error: machine/apmvar.h: No such file or directory configure:18572: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | #define HAVE_SYS_AGPIO_H 1 | #define HAVE_SYS_MEMRANGE_H 1 | #define HAS_MTRR_SUPPORT 1 | #define HAVE_SYS_LINKER_H 1 | #define HAVE_SYSV_IPC 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:18586: result: no configure:18590: checking machine/apmvar.h presence configure:18605: cc -E conftest.c conftest.c:64:28: error: machine/apmvar.h: No such file or directory configure:18612: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | #define HAVE_SYS_AGPIO_H 1 | #define HAVE_SYS_MEMRANGE_H 1 | #define HAS_MTRR_SUPPORT 1 | #define HAVE_SYS_LINKER_H 1 | #define HAVE_SYSV_IPC 1 | /* end confdefs.h. */ | #include configure:18626: result: no configure:18659: checking for machine/apmvar.h configure:18666: result: no configure:18842: checking execinfo.h usability configure:18859: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c:97:22: error: execinfo.h: No such file or directory configure:18866: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | #define HAVE_SYS_AGPIO_H 1 | #define HAVE_SYS_MEMRANGE_H 1 | #define HAS_MTRR_SUPPORT 1 | #define HAVE_SYS_LINKER_H 1 | #define HAVE_SYSV_IPC 1 | /* end confdefs.h. */ | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include configure:18880: result: no configure:18884: checking execinfo.h presence configure:18899: cc -E conftest.c conftest.c:64:22: error: execinfo.h: No such file or directory configure:18906: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | #define HAVE_SYS_AGPIO_H 1 | #define HAVE_SYS_MEMRANGE_H 1 | #define HAS_MTRR_SUPPORT 1 | #define HAVE_SYS_LINKER_H 1 | #define HAVE_SYSV_IPC 1 | /* end confdefs.h. */ | #include configure:18920: result: no configure:18953: checking for execinfo.h configure:18960: result: no configure:19841: checking to see if we can install the Xorg server as root configure:19858: result: yes configure:19886: checking if Xtrans should support UNIX socket connections configure:19895: result: yes configure:19904: checking if Xtrans should support TCP socket connections configure:19906: result: yes configure:19916: checking for library containing socket configure:19957: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c -lm >&5 configure:19964: $? = 0 configure:19995: result: none required configure:20003: checking for library containing gethostbyname configure:20044: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c -lm >&5 configure:20051: $? = 0 configure:20082: result: none required configure:20096: checking for getaddrinfo configure:20152: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c -lm >&5 configure:20159: $? = 0 configure:20179: result: yes configure:20189: checking if IPv6 support should be built configure:20198: result: yes configure:20202: checking for struct sockaddr_in.sin_len configure:20235: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:20242: $? = 0 configure:20305: result: yes configure:20317: checking for socklen_t configure:20348: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:20355: $? = 0 configure:20385: cc -c -O2 -fno-strict-aliasing -pipe conftest.c >&5 conftest.c: In function 'main': conftest.c:115: error: expected expression before ')' token configure:20392: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | #define HAVE_SYS_AGPIO_H 1 | #define HAVE_SYS_MEMRANGE_H 1 | #define HAS_MTRR_SUPPORT 1 | #define HAVE_SYS_LINKER_H 1 | #define HAVE_SYSV_IPC 1 | #define USE_DEV_IO 1 | #define CSRG_BASED 1 | #define PCCONS_SUPPORT 1 | #define PCVT_SUPPORT 1 | #define SYSCONS_SUPPORT 1 | #define PACKAGE_VERSION_MAJOR 1 | #define PACKAGE_VERSION_MINOR 6 | #define PACKAGE_VERSION_PATCHLEVEL 1 | #define UNIXCONN 1 | #define TCPCONN 1 | #define IPv6 1 | #define BSD44SOCKETS 1 | /* end confdefs.h. */ | | #include | #ifdef HAVE_SYS_TYPES_H | # include | #endif | #ifdef HAVE_SYS_STAT_H | # include | #endif | #ifdef STDC_HEADERS | # include | # include | #else | # ifdef HAVE_STDLIB_H | # include | # endif | #endif | #ifdef HAVE_STRING_H | # if !defined STDC_HEADERS && defined HAVE_MEMORY_H | # include | # endif | # include | #endif | #ifdef HAVE_STRINGS_H | # include | #endif | #ifdef HAVE_INTTYPES_H | # include | #endif | #ifdef HAVE_STDINT_H | # include | #endif | #ifdef HAVE_UNISTD_H | # include | #endif | #include | | int | main () | { | if (sizeof ((socklen_t))) | return 0; | ; | return 0; | } configure:20415: result: yes configure:20440: checking if Xtrans should support os-specific local connections configure:20442: result: no configure:20471: checking for authdes_seccreate configure:20527: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c -lm >&5 configure:20534: $? = 0 configure:20556: result: yes configure:20471: checking for authdes_create configure:20527: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c -lm >&5 configure:20534: $? = 0 configure:20556: result: yes configure:20576: checking for library containing getsecretkey configure:20617: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c -lm >&5 /var/tmp//ccWMOYxs.o(.text+0x7): In function `main': : undefined reference to `getsecretkey' configure:20624: $? = 1 configure: failed program was: | /* confdefs.h. */ | #define PACKAGE_NAME "xorg-server" | #define PACKAGE_TARNAME "xorg-server" | #define PACKAGE_VERSION "1.6.1" | #define PACKAGE_STRING "xorg-server 1.6.1" | #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" | #define PACKAGE "xorg-server" | #define VERSION "1.6.1" | #define STDC_HEADERS 1 | #define HAVE_SYS_TYPES_H 1 | #define HAVE_SYS_STAT_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_MEMORY_H 1 | #define HAVE_STRINGS_H 1 | #define HAVE_INTTYPES_H 1 | #define HAVE_STDINT_H 1 | #define HAVE_UNISTD_H 1 | #define HAVE_DLFCN_H 1 | #define LT_OBJDIR ".libs/" | #define YYTEXT_POINTER 1 | #define HAVE_DIRENT_H 1 | #define STDC_HEADERS 1 | #define HAVE_FCNTL_H 1 | #define HAVE_STDLIB_H 1 | #define HAVE_STRING_H 1 | #define HAVE_UNISTD_H 1 | #define SIZEOF_UNSIGNED_LONG 8 | #define _XSERVER64 1 | #define USE_SYS_ENDIAN_H 1 | #define bswap_16 bswap16 | #define bswap_32 bswap32 | #define bswap_64 bswap64 | #define HAVE_VPRINTF 1 | #define HAVE_GETEUID 1 | #define HAVE_GETUID 1 | #define HAVE_LINK 1 | #define HAVE_MEMMOVE 1 | #define HAVE_MEMSET 1 | #define HAVE_MKSTEMP 1 | #define HAVE_STRCHR 1 | #define HAVE_STRRCHR 1 | #define HAVE_STRTOL 1 | #define HAVE_GETOPT 1 | #define HAVE_GETOPT_LONG 1 | #define HAVE_VSNPRINTF 1 | #define HAVE_STRCASESTR 1 | #define HAVE_FFS 1 | #define HAVE_ALLOCA 1 | #define HAS_GETDTABLESIZE 1 | #define HAS_GETIFADDRS 1 | #define HAS_GETPEEREID 1 | #define HAS_STRLCPY 1 | #define HAS_MMAP 1 | #define HAVE_LIBM 1 | #define HAVE_CBRT 1 | #define HAVE_NDBM_H 1 | #define HAVE_SYS_AGPIO_H 1 | #define HAVE_SYS_MEMRANGE_H 1 | #define HAS_MTRR_SUPPORT 1 | #define HAVE_SYS_LINKER_H 1 | #define HAVE_SYSV_IPC 1 | #define USE_DEV_IO 1 | #define CSRG_BASED 1 | #define PCCONS_SUPPORT 1 | #define PCVT_SUPPORT 1 | #define SYSCONS_SUPPORT 1 | #define PACKAGE_VERSION_MAJOR 1 | #define PACKAGE_VERSION_MINOR 6 | #define PACKAGE_VERSION_PATCHLEVEL 1 | #define UNIXCONN 1 | #define TCPCONN 1 | #define IPv6 1 | #define BSD44SOCKETS 1 | #define HAVE_SOCKLEN_T 1 | #define HAVE_AUTHDES_SECCREATE 1 | #define HAVE_AUTHDES_CREATE 1 | /* end confdefs.h. */ | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char getsecretkey (); | int | main () | { | return getsecretkey (); | ; | return 0; | } configure:20617: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c -lrpcsvc -lm >&5 configure:20624: $? = 0 configure:20655: result: -lrpcsvc configure:20666: checking if Secure RPC authentication ("SUN-DES-1") should be supported configure:20675: result: yes configure:20885: checking for /usr/local/share/sgml/X11/defs.ent configure:20902: result: no configure:20914: checking for linuxdoc configure:20947: result: no configure:20954: checking for ps2pdf configure:20972: found /usr/local/bin/ps2pdf configure:20984: result: /usr/local/bin/ps2pdf configure:20993: checking Whether to build documentation configure:21011: result: no configure:21014: checking Whether to build pdf documentation configure:21032: result: yes configure:21137: checking for DBUS configure:21144: $PKG_CONFIG --exists --print-errors "dbus-1" configure:21147: $? = 0 configure:21160: $PKG_CONFIG --exists --print-errors "dbus-1" configure:21163: $? = 0 configure:21198: result: yes configure:21246: checking for HAL configure:21253: $PKG_CONFIG --exists --print-errors "hal" configure:21256: $? = 0 configure:21269: $PKG_CONFIG --exists --print-errors "hal" configure:21272: $? = 0 configure:21307: result: yes configure:21356: checking for glibc... configure:21371: cc -E conftest.c conftest.c:2:22: error: features.h: No such file or directory conftest.c:4:2: error: #error configure:21378: $? = 1 configure: failed program was: | | #include | #ifndef __GLIBC__ | #error | #endif | configure:21392: result: no configure:21399: checking for clock_gettime configure:21455: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c -lrpcsvc -lm >&5 configure:21462: $? = 0 configure:21484: result: yes configure:21569: checking for a useful monotonic clock ... configure:21610: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c >&5 configure:21614: $? = 0 configure:21620: ./conftest configure:21624: $? = 0 configure:21647: result: yes configure:21810: checking for XLIB configure:21817: $PKG_CONFIG --exists --print-errors "x11" configure:21820: $? = 0 configure:21833: $PKG_CONFIG --exists --print-errors "x11" configure:21836: $? = 0 configure:21913: result: yes configure:21919: checking for GL configure:21926: $PKG_CONFIG --exists --print-errors "glproto >= 1.4.9 gl >= 7.1.0" configure:21929: $? = 0 configure:21942: $PKG_CONFIG --exists --print-errors "glproto >= 1.4.9 gl >= 7.1.0" configure:21945: $? = 0 configure:22022: result: yes configure:22087: checking for DRIPROTO configure:22094: $PKG_CONFIG --exists --print-errors "xf86driproto" configure:22097: $? = 0 configure:22110: $PKG_CONFIG --exists --print-errors "xf86driproto" configure:22113: $? = 0 configure:22190: result: yes configure:22196: checking for GL configure:22299: result: yes configure:22309: checking for DRI2PROTO configure:22316: $PKG_CONFIG --exists --print-errors "dri2proto >= 1.99.3" configure:22319: $? = 0 configure:22332: $PKG_CONFIG --exists --print-errors "dri2proto >= 1.99.3" configure:22335: $? = 0 configure:22370: result: yes configure:22401: checking for LIBDRM configure:22408: $PKG_CONFIG --exists --print-errors "libdrm >= 2.3.0" configure:22411: $? = 0 configure:22424: $PKG_CONFIG --exists --print-errors "libdrm >= 2.3.0" configure:22427: $? = 0 configure:22504: result: yes configure:22533: cc -c -D_THREAD_SAFE -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include -I/usr/local/include/drm -Wall conftest.c >&5 configure:22540: $? = 0 configure:23347: checking for strcasecmp configure:23403: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c -lrpcsvc -lm >&5 conftest.c:136: warning: conflicting types for built-in function 'strcasecmp' configure:23410: $? = 0 configure:23430: result: yes configure:23442: checking for strncasecmp configure:23498: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c -lrpcsvc -lm >&5 conftest.c:136: warning: conflicting types for built-in function 'strncasecmp' configure:23505: $? = 0 configure:23525: result: yes configure:23537: checking for strcasestr configure:23620: result: yes configure:23643: checking for XDMCP configure:23650: $PKG_CONFIG --exists --print-errors "xdmcp" configure:23653: $? = 0 configure:23666: $PKG_CONFIG --exists --print-errors "xdmcp" configure:23669: $? = 0 configure:23704: result: yes configure:23709: checking for XdmcpWrap in -lXdmcp configure:23744: cc -o conftest -O2 -fno-strict-aliasing -pipe conftest.c -lXdmcp -L/usr/local/lib -lXdmcp -lrpcsvc -lm >&5 configure:23751: $? = 0 configure:23772: result: yes configure:24202: checking for XSERVERCFLAGS configure:24209: $PKG_CONFIG --exists --print-errors "$REQUIRED_MODULES $REQUIRED_LIBS" Requested 'randrproto >= 1.2.99.1' but version of RandrProto is 1.2.1 configure:24212: $? = 1 configure:24225: $PKG_CONFIG --exists --print-errors "$REQUIRED_MODULES $REQUIRED_LIBS" Requested 'randrproto >= 1.2.99.1' but version of RandrProto is 1.2.1 configure:24228: $? = 1 Requested 'randrproto >= 1.2.99.1' but version of RandrProto is 1.2.1 configure:24255: error: Package requirements (randrproto >= 1.2.99.1 renderproto >= 0.9.3 fixesproto >= 4.0 damageproto >= 1.1 xcmiscproto xextproto >= 7.0.3 xproto >= 7.0.13 xtrans >= 1.2.2 bigreqsproto resourceproto fontsproto inputproto >= 1.5 kbproto >= 1.0.3 videoproto compositeproto >= 0.4 recordproto scrnsaverproto >= 1.1 resourceproto xineramaproto xinerama xkbfile xfont xau fontenc pixman-1 >= 0.13.2 hal dbus-1 xdmcp) were not met: Requested 'randrproto >= 1.2.99.1' but version of RandrProto is 1.2.1 Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables XSERVERCFLAGS_CFLAGS and XSERVERCFLAGS_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. ## ---------------- ## ## Cache variables. ## ## ---------------- ## ac_cv_build=amd64-portbld-freebsd7.2 ac_cv_c_bigendian=no ac_cv_c_compiler_gnu=yes ac_cv_c_const=yes ac_cv_env_CCASFLAGS_set='' ac_cv_env_CCASFLAGS_value='' ac_cv_env_CCAS_set='' ac_cv_env_CCAS_value='' ac_cv_env_CC_set=set ac_cv_env_CC_value=cc ac_cv_env_CFLAGS_set=set ac_cv_env_CFLAGS_value='-O2 -fno-strict-aliasing -pipe' ac_cv_env_CPPFLAGS_set='' ac_cv_env_CPPFLAGS_value='' ac_cv_env_CPP_set='' ac_cv_env_CPP_value='' ac_cv_env_DBUS_CFLAGS_set='' ac_cv_env_DBUS_CFLAGS_value='' ac_cv_env_DBUS_LIBS_set='' ac_cv_env_DBUS_LIBS_value='' ac_cv_env_DGA_CFLAGS_set='' ac_cv_env_DGA_CFLAGS_value='' ac_cv_env_DGA_LIBS_set='' ac_cv_env_DGA_LIBS_value='' ac_cv_env_DMXEXAMPLES_DEP_CFLAGS_set='' ac_cv_env_DMXEXAMPLES_DEP_CFLAGS_value='' ac_cv_env_DMXEXAMPLES_DEP_LIBS_set='' ac_cv_env_DMXEXAMPLES_DEP_LIBS_value='' ac_cv_env_DMXMODULES_CFLAGS_set='' ac_cv_env_DMXMODULES_CFLAGS_value='' ac_cv_env_DMXMODULES_LIBS_set='' ac_cv_env_DMXMODULES_LIBS_value='' ac_cv_env_DMXXIEXAMPLES_DEP_CFLAGS_set='' ac_cv_env_DMXXIEXAMPLES_DEP_CFLAGS_value='' ac_cv_env_DMXXIEXAMPLES_DEP_LIBS_set='' ac_cv_env_DMXXIEXAMPLES_DEP_LIBS_value='' ac_cv_env_DMXXMUEXAMPLES_DEP_CFLAGS_set='' ac_cv_env_DMXXMUEXAMPLES_DEP_CFLAGS_value='' ac_cv_env_DMXXMUEXAMPLES_DEP_LIBS_set='' ac_cv_env_DMXXMUEXAMPLES_DEP_LIBS_value='' ac_cv_env_DRI2PROTO_CFLAGS_set='' ac_cv_env_DRI2PROTO_CFLAGS_value='' ac_cv_env_DRI2PROTO_LIBS_set='' ac_cv_env_DRI2PROTO_LIBS_value='' ac_cv_env_DRIPROTO_CFLAGS_set='' ac_cv_env_DRIPROTO_CFLAGS_value='' ac_cv_env_DRIPROTO_LIBS_set='' ac_cv_env_DRIPROTO_LIBS_value='' ac_cv_env_GL_CFLAGS_set='' ac_cv_env_GL_CFLAGS_value='' ac_cv_env_GL_LIBS_set='' ac_cv_env_GL_LIBS_value='' ac_cv_env_HAL_CFLAGS_set='' ac_cv_env_HAL_CFLAGS_value='' ac_cv_env_HAL_LIBS_set='' ac_cv_env_HAL_LIBS_value='' ac_cv_env_LDFLAGS_set='' ac_cv_env_LDFLAGS_value='' ac_cv_env_LIBDRM_CFLAGS_set='' ac_cv_env_LIBDRM_CFLAGS_value='' ac_cv_env_LIBDRM_LIBS_set='' ac_cv_env_LIBDRM_LIBS_value='' ac_cv_env_LIBS_set='' ac_cv_env_LIBS_value='' ac_cv_env_PCIACCESS_CFLAGS_set='' ac_cv_env_PCIACCESS_CFLAGS_value='' ac_cv_env_PCIACCESS_LIBS_set='' ac_cv_env_PCIACCESS_LIBS_value='' ac_cv_env_PKG_CONFIG_set='' ac_cv_env_PKG_CONFIG_value='' ac_cv_env_TSLIB_CFLAGS_set='' ac_cv_env_TSLIB_CFLAGS_value='' ac_cv_env_TSLIB_LIBS_set='' ac_cv_env_TSLIB_LIBS_value='' ac_cv_env_X11EXAMPLES_DEP_CFLAGS_set='' ac_cv_env_X11EXAMPLES_DEP_CFLAGS_value='' ac_cv_env_X11EXAMPLES_DEP_LIBS_set='' ac_cv_env_X11EXAMPLES_DEP_LIBS_value='' ac_cv_env_XDMCP_CFLAGS_set='' ac_cv_env_XDMCP_CFLAGS_value='' ac_cv_env_XDMCP_LIBS_set='' ac_cv_env_XDMCP_LIBS_value='' ac_cv_env_XDMXCONFIG_DEP_CFLAGS_set='' ac_cv_env_XDMXCONFIG_DEP_CFLAGS_value='' ac_cv_env_XDMXCONFIG_DEP_LIBS_set='' ac_cv_env_XDMXCONFIG_DEP_LIBS_value='' ac_cv_env_XEPHYR_CFLAGS_set='' ac_cv_env_XEPHYR_CFLAGS_value='' ac_cv_env_XEPHYR_LIBS_set='' ac_cv_env_XEPHYR_LIBS_value='' ac_cv_env_XF86VIDMODE_CFLAGS_set='' ac_cv_env_XF86VIDMODE_CFLAGS_value='' ac_cv_env_XF86VIDMODE_LIBS_set='' ac_cv_env_XF86VIDMODE_LIBS_value='' ac_cv_env_XLIB_CFLAGS_set='' ac_cv_env_XLIB_CFLAGS_value='' ac_cv_env_XLIB_LIBS_set='' ac_cv_env_XLIB_LIBS_value='' ac_cv_env_XNESTMODULES_CFLAGS_set='' ac_cv_env_XNESTMODULES_CFLAGS_value='' ac_cv_env_XNESTMODULES_LIBS_set='' ac_cv_env_XNESTMODULES_LIBS_value='' ac_cv_env_XORG_MODULES_CFLAGS_set='' ac_cv_env_XORG_MODULES_CFLAGS_value='' ac_cv_env_XORG_MODULES_LIBS_set='' ac_cv_env_XORG_MODULES_LIBS_value='' ac_cv_env_XPBPROXY_CFLAGS_set='' ac_cv_env_XPBPROXY_CFLAGS_value='' ac_cv_env_XPBPROXY_LIBS_set='' ac_cv_env_XPBPROXY_LIBS_value='' ac_cv_env_XRESEXAMPLES_DEP_CFLAGS_set='' ac_cv_env_XRESEXAMPLES_DEP_CFLAGS_value='' ac_cv_env_XRESEXAMPLES_DEP_LIBS_set='' ac_cv_env_XRESEXAMPLES_DEP_LIBS_value='' ac_cv_env_XSERVERCFLAGS_CFLAGS_set='' ac_cv_env_XSERVERCFLAGS_CFLAGS_value='' ac_cv_env_XSERVERCFLAGS_LIBS_set='' ac_cv_env_XSERVERCFLAGS_LIBS_value='' ac_cv_env_XSERVERLIBS_CFLAGS_set='' ac_cv_env_XSERVERLIBS_CFLAGS_value='' ac_cv_env_XSERVERLIBS_LIBS_set='' ac_cv_env_XSERVERLIBS_LIBS_value='' ac_cv_env_XTSTEXAMPLES_DEP_CFLAGS_set='' ac_cv_env_XTSTEXAMPLES_DEP_CFLAGS_value='' ac_cv_env_XTSTEXAMPLES_DEP_LIBS_set='' ac_cv_env_XTSTEXAMPLES_DEP_LIBS_value='' ac_cv_env_XWINMODULES_CFLAGS_set='' ac_cv_env_XWINMODULES_CFLAGS_value='' ac_cv_env_XWINMODULES_LIBS_set='' ac_cv_env_XWINMODULES_LIBS_value='' ac_cv_env_YACC_set='' ac_cv_env_YACC_value='' ac_cv_env_YFLAGS_set='' ac_cv_env_YFLAGS_value='' ac_cv_env_build_alias_set=set ac_cv_env_build_alias_value=amd64-portbld-freebsd7.2 ac_cv_env_host_alias_set='' ac_cv_env_host_alias_value='' ac_cv_env_target_alias_set='' ac_cv_env_target_alias_value='' ac_cv_file__usr_local_share_sgml_X11_defs_ent=no ac_cv_func__doprnt=no ac_cv_func_alloca_works=yes ac_cv_func_authdes_create=yes ac_cv_func_authdes_seccreate=yes ac_cv_func_backtrace=no ac_cv_func_clock_gettime=yes ac_cv_func_dlopen=yes ac_cv_func_ffs=yes ac_cv_func_getaddrinfo=yes ac_cv_func_getdtablesize=yes ac_cv_func_geteuid=yes ac_cv_func_getifaddrs=yes ac_cv_func_getisax=no ac_cv_func_getopt=yes ac_cv_func_getopt_long=yes ac_cv_func_getpeereid=yes ac_cv_func_getpeerucred=no ac_cv_func_getuid=yes ac_cv_func_getzoneid=no ac_cv_func_link=yes ac_cv_func_memmove=yes ac_cv_func_memset=yes ac_cv_func_mkstemp=yes ac_cv_func_mmap=yes ac_cv_func_shmctl64=no ac_cv_func_strcasecmp=yes ac_cv_func_strcasestr=yes ac_cv_func_strchr=yes ac_cv_func_strlcat=yes ac_cv_func_strlcpy=yes ac_cv_func_strncasecmp=yes ac_cv_func_strrchr=yes ac_cv_func_strtol=yes ac_cv_func_vprintf=yes ac_cv_func_vsnprintf=yes ac_cv_func_walkcontext=no ac_cv_header_asm_mtrr_h=no ac_cv_header_byteswap_h=no ac_cv_header_dbm_h=no ac_cv_header_dirent_dirent_h=yes ac_cv_header_dlfcn_h=yes ac_cv_header_execinfo_h=no ac_cv_header_fcntl_h=yes ac_cv_header_inttypes_h=yes ac_cv_header_linux_agpgart_h=no ac_cv_header_linux_apm_bios_h=no ac_cv_header_linux_fb_h=no ac_cv_header_machine_apmvar_h=no ac_cv_header_machine_mtrr_h=no ac_cv_header_memory_h=yes ac_cv_header_ndbm_h=yes ac_cv_header_rpcsvc_dbm_h=no ac_cv_header_stdc=yes ac_cv_header_stdint_h=yes ac_cv_header_stdlib_h=yes ac_cv_header_string_h=yes ac_cv_header_strings_h=yes ac_cv_header_sys_agpio_h=yes ac_cv_header_sys_endian_h=yes ac_cv_header_sys_linker_h=yes ac_cv_header_sys_memrange_h=yes ac_cv_header_sys_stat_h=yes ac_cv_header_sys_types_h=yes ac_cv_header_unistd_h=yes ac_cv_host=amd64-portbld-freebsd7.2 ac_cv_lib_Xdmcp_XdmcpWrap=yes ac_cv_lib_lex=-lfl ac_cv_lib_m_cbrt=yes ac_cv_lib_m_sqrt=yes ac_cv_member_struct_sockaddr_in_sin_len=yes ac_cv_memrange_h=yes ac_cv_objext=o ac_cv_path_DOLT_BASH=/usr/local/bin/bash ac_cv_path_EGREP='/usr/bin/grep -E' ac_cv_path_FGREP='/usr/bin/grep -F' ac_cv_path_GREP=/usr/bin/grep ac_cv_path_PS2PDF=/usr/local/bin/ps2pdf ac_cv_path_RAWCPP=/usr/bin/cpp ac_cv_path_SED=/usr/bin/sed ac_cv_path_ac_pt_PKG_CONFIG=/usr/local/bin/pkg-config ac_cv_path_mkdir=/usr/local/bin/gmkdir ac_cv_prog_AWK=gawk ac_cv_prog_CPP='cc -E' ac_cv_prog_LEX=flex ac_cv_prog_YACC='bison -y' ac_cv_prog_ac_ct_AR=ar ac_cv_prog_ac_ct_CC=cc ac_cv_prog_ac_ct_OBJDUMP=objdump ac_cv_prog_ac_ct_RANLIB=ranlib ac_cv_prog_ac_ct_STRIP=strip ac_cv_prog_cc_c89='' ac_cv_prog_cc_g=yes ac_cv_prog_lex_root=lex.yy ac_cv_prog_lex_yytext_pointer=yes ac_cv_prog_make_make_set=yes ac_cv_search_gethostbyname='none required' ac_cv_search_getsecretkey=-lrpcsvc ac_cv_search_opendir='none required' ac_cv_search_socket='none required' ac_cv_sizeof_unsigned_long=8 ac_cv_sys_file_offset_bits=no ac_cv_sys_largefile_CC=no ac_cv_sys_linker_h=yes ac_cv_sysv_ipc=yes ac_cv_type_pid_t=yes ac_cv_type_socklen_t=yes ac_cv_working_alloca_h=no am_cv_CCAS_dependencies_compiler_type=gcc3 am_cv_CC_dependencies_compiler_type=gcc3 lt_cv_deplibs_check_method=pass_all lt_cv_file_magic_cmd='$MAGIC_CMD' lt_cv_file_magic_test_file='' lt_cv_ld_reload_flag=-r lt_cv_nm_interface='BSD nm' lt_cv_objdir=.libs lt_cv_path_LD=/usr/bin/ld lt_cv_path_NM='/usr/bin/nm -B' lt_cv_prog_compiler_c_o=yes lt_cv_prog_compiler_pic_works=yes lt_cv_prog_compiler_rtti_exceptions=no lt_cv_prog_compiler_static_works=yes lt_cv_prog_gnu_ld=yes lt_cv_sys_global_symbol_pipe='sed -n -e '\''s/^.*[ ]\([ABCDGIRSTW][ABCDGIRSTW]*\)[ ][ ]*\([_A-Za-z][_A-Za-z0-9]*\)$/\1 \2 \2/p'\''' lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"\2", (void *) \&\2},/p'\''' lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \(lib[^ ]*\)$/ {"\2", (void *) \&\2},/p'\'' -e '\''s/^[ABCDGIRSTW]* \([^ ]*\) \([^ ]*\)$/ {"lib\2", (void *) \&\2},/p'\''' lt_cv_sys_global_symbol_to_cdecl='sed -n -e '\''s/^T .* \(.*\)$/extern int \1();/p'\'' -e '\''s/^[ABCDGIRSTW]* .* \(.*\)$/extern char \1;/p'\''' lt_cv_sys_max_cmd_len=262144 pkg_cv_DBUS_CFLAGS='-I/usr/local/include/dbus-1.0 -I/usr/local/include/dbus-1.0/include ' pkg_cv_DBUS_LIBS='-L/usr/local/lib -ldbus-1 ' pkg_cv_DRI2PROTO_CFLAGS='-I/usr/local/include ' pkg_cv_DRI2PROTO_LIBS=' ' pkg_cv_DRIPROTO_CFLAGS='-I/usr/local/include/X11/dri ' pkg_cv_DRIPROTO_LIBS=' ' pkg_cv_GL_CFLAGS='-D_THREAD_SAFE -I/usr/local/include -I/usr/local/include/drm ' pkg_cv_GL_LIBS='-L/usr/local/lib -lGL ' pkg_cv_HAL_CFLAGS='-DDBUS_API_SUBJECT_TO_CHANGE -I/usr/local/include/hal -I/usr/local/include/dbus-1.0 -I/usr/local/include/dbus-1.0/include ' pkg_cv_HAL_LIBS='-L/usr/local/lib -lhal -ldbus-1 ' pkg_cv_LIBDRM_CFLAGS='-I/usr/local/include -I/usr/local/include/drm ' pkg_cv_LIBDRM_LIBS='-L/usr/local/lib -ldrm ' pkg_cv_XDMCP_CFLAGS='-I/usr/local/include ' pkg_cv_XDMCP_LIBS='-L/usr/local/lib -lXdmcp ' pkg_cv_XLIB_CFLAGS='-D_THREAD_SAFE -I/usr/local/include ' pkg_cv_XLIB_LIBS='-L/usr/local/lib -lX11 ' ## ----------------- ## ## Output variables. ## ## ----------------- ## ACLOCAL='${SHELL} /usr/ports/x11-servers/xorg-server/work/xorg-server-1.6.1/missing --run aclocal-1.10' ADMIN_MAN_DIR='' ADMIN_MAN_SUFFIX='' AGP_FALSE='#' AGP_TRUE='' AIGLX_FALSE='#' AIGLX_TRUE='' ALLOCA='' ALPHA_VIDEO_FALSE='' ALPHA_VIDEO_TRUE='#' AMDEPBACKSLASH='\' AMDEP_FALSE='#' AMDEP_TRUE='' AMTAR='${SHELL} /usr/ports/x11-servers/xorg-server/work/xorg-server-1.6.1/missing --run tar' APPLE_APPLICATIONS_DIR='/Applications/Utilities' APPLE_APPLICATION_ID='org.x.X11' APPLE_APPLICATION_NAME='X11' APP_MAN_DIR='' APP_MAN_SUFFIX='' AR='ar' ARM_VIDEO_FALSE='' ARM_VIDEO_TRUE='#' AS='as' AUTOCONF='${SHELL} /usr/ports/x11-servers/xorg-server/work/xorg-server-1.6.1/missing --run autoconf' AUTOHEADER='${SHELL} /usr/ports/x11-servers/xorg-server/work/xorg-server-1.6.1/missing --run autoheader' AUTOMAKE='${SHELL} /usr/ports/x11-servers/xorg-server/work/xorg-server-1.6.1/missing --run automake-1.10' AWK='gawk' BASE_FONT_PATH='/usr/local/lib/X11/fonts' BSD_APM_FALSE='' BSD_APM_TRUE='#' BSD_KQUEUE_APM_FALSE='' BSD_KQUEUE_APM_TRUE='#' BUILDDOCS_FALSE='' BUILDDOCS_TRUE='#' BUILD_DATE='' BUILD_KDRIVEFBDEVLIB_FALSE='' BUILD_KDRIVEFBDEVLIB_TRUE='' BUILD_LINUXDOC_FALSE='' BUILD_LINUXDOC_TRUE='#' BUILD_PDFDOC_FALSE='#' BUILD_PDFDOC_TRUE='' BUILD_TIME='' CC='cc' CCAS='cc' CCASDEPMODE='depmode=gcc3' CCASFLAGS='-O2 -fno-strict-aliasing -pipe' CCDEPMODE='depmode=gcc3' CFLAGS='-O2 -fno-strict-aliasing -pipe' COMPILEDDEFAULTFONTPATH='/usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/' COMPOSITE_FALSE='#' COMPOSITE_TRUE='' CONFIG_DBUS_API_FALSE='' CONFIG_DBUS_API_TRUE='#' CONFIG_HAL_FALSE='#' CONFIG_HAL_TRUE='' CONFIG_NEED_DBUS_FALSE='#' CONFIG_NEED_DBUS_TRUE='' CPP='cc -E' CPPFLAGS='' CYGPATH_W='echo' DARWIN_LIBS='' DBE_FALSE='#' DBE_TRUE='' DBUS_CFLAGS='-I/usr/local/include/dbus-1.0 -I/usr/local/include/dbus-1.0/include ' DBUS_LIBS='-L/usr/local/lib -ldbus-1 ' DEBUG_FALSE='' DEBUG_TRUE='#' DEFAULT_LIBRARY_PATH='' DEFAULT_LOGPREFIX='' DEFAULT_MODULE_PATH='' DEFS='' DEPDIR='.deps' DGA_CFLAGS='' DGA_FALSE='' DGA_LIBS='' DGA_TRUE='' DIX_CFLAGS='' DLLTOOL='dlltool' DMXEXAMPLES_DEP_CFLAGS='' DMXEXAMPLES_DEP_LIBS='' DMXMODULES_CFLAGS='' DMXMODULES_LIBS='' DMXXIEXAMPLES_DEP_CFLAGS='' DMXXIEXAMPLES_DEP_LIBS='' DMXXMUEXAMPLES_DEP_CFLAGS='' DMXXMUEXAMPLES_DEP_LIBS='' DMX_BUILD_LNX_FALSE='' DMX_BUILD_LNX_TRUE='' DMX_BUILD_USB_FALSE='' DMX_BUILD_USB_TRUE='' DMX_FALSE='' DMX_TRUE='' DOLT_BASH='/usr/local/bin/bash' DPMSExtension_FALSE='#' DPMSExtension_TRUE='' DRI2PROTO_CFLAGS='-I/usr/local/include ' DRI2PROTO_LIBS=' ' DRI2_AIGLX_FALSE='#' DRI2_AIGLX_TRUE='' DRI2_FALSE='#' DRI2_TRUE='' DRIPROTO_CFLAGS='-I/usr/local/include/X11/dri ' DRIPROTO_LIBS=' ' DRIVER_MAN_DIR='' DRIVER_MAN_SUFFIX='' DRI_DRIVER_PATH='/usr/local/lib/dri' DRI_FALSE='#' DRI_TRUE='' DSYMUTIL='' DTRACE='' DUMPBIN='' ECHO_C='' ECHO_N='-n' ECHO_T='' EGREP='/usr/bin/grep -E' EXEEXT='' FBDEVHW_FALSE='' FBDEVHW_TRUE='#' FGREP='/usr/bin/grep -F' FILE_MAN_DIR='' FILE_MAN_SUFFIX='' FREEBSD_KLDLOAD_FALSE='#' FREEBSD_KLDLOAD_TRUE='' GLX_ARCH_DEFINES='-D__GLX_ALIGN64' GLX_DEFINES='' GLX_FALSE='#' GLX_TRUE='' GL_CFLAGS='-D_THREAD_SAFE -I/usr/local/include -I/usr/local/include/drm ' GL_LIBS='-L/usr/local/lib -lGL ' GREP='/usr/bin/grep' HAL_CFLAGS='-DDBUS_API_SUBJECT_TO_CHANGE -I/usr/local/include/hal -I/usr/local/include/dbus-1.0 -I/usr/local/include/dbus-1.0/include ' HAL_LIBS='-L/usr/local/lib -lhal -ldbus-1 ' HAVE_AGL_FRAMEWORK_FALSE='' HAVE_AGL_FRAMEWORK_TRUE='' HAVE_DBUS_FALSE='#' HAVE_DBUS_TRUE='' HAVE_XPLUGIN_FALSE='' HAVE_XPLUGIN_TRUE='' I386_VIDEO_FALSE='#' I386_VIDEO_TRUE='' INSTALL_DATA='install -o root -g wheel -m 444' INSTALL_LIBXF86CONFIG_FALSE='' INSTALL_LIBXF86CONFIG_TRUE='#' INSTALL_PROGRAM='install -s -o root -g wheel -m 555' INSTALL_SCRIPT='install -o root -g wheel -m 555' INSTALL_SETUID_FALSE='#' INSTALL_SETUID_TRUE='' INSTALL_STRIP_PROGRAM='$(install_sh) -c -s' INT10_STUB_FALSE='' INT10_STUB_TRUE='#' INT10_VM86_FALSE='' INT10_VM86_TRUE='#' INT10_X86EMU_FALSE='#' INT10_X86EMU_TRUE='' KDRIVEFBDEV_FALSE='' KDRIVEFBDEV_TRUE='' KDRIVELINUX_FALSE='' KDRIVELINUX_TRUE='' KDRIVEVESA_FALSE='' KDRIVEVESA_TRUE='' KDRIVE_CFLAGS='' KDRIVE_FALSE='' KDRIVE_HW_FALSE='' KDRIVE_HW_TRUE='#' KDRIVE_INCS='' KDRIVE_LIBS='' KDRIVE_LOCAL_LIBS='' KDRIVE_PURE_INCS='' KDRIVE_PURE_LIBS='' KDRIVE_TRUE='' LD='/usr/bin/ld' LDFLAGS='' LD_EXPORT_SYMBOLS_FLAG='' LEX='flex' LEXLIB='-lfl' LEX_OUTPUT_ROOT='lex.yy' LIBDRM_CFLAGS='-I/usr/local/include -I/usr/local/include/drm ' LIBDRM_LIBS='-L/usr/local/lib -ldrm ' LIBOBJS='' LIBS='-lrpcsvc -lm ' LIBTOOL='$(top_builddir)/doltlibtool' LIB_MAN_DIR='' LIB_MAN_SUFFIX='' LINUXDOC='' LINUX_ALPHA_FALSE='' LINUX_ALPHA_TRUE='' LINUX_IA64_FALSE='' LINUX_IA64_TRUE='' LIPO='' LNXACPI_FALSE='' LNXACPI_TRUE='' LNXAPM_FALSE='' LNXAPM_TRUE='#' LN_S='ln -s' LTCOMPILE='$(top_builddir)/doltcompile $(COMPILE)' LTCXXCOMPILE='$(top_builddir)/doltcompile $(CXXCOMPILE)' LTLIBOBJS='' MAINT='#' MAINTAINER_MODE_FALSE='' MAINTAINER_MODE_TRUE='#' MAKEINFO='${SHELL} /usr/ports/x11-servers/xorg-server/work/xorg-server-1.6.1/missing --run makeinfo' MAKE_HTML='SGML_SEARCH_PATH=/usr/local/share/sgml -B html --split=0' MAKE_PDF='/usr/local/bin/ps2pdf' MAKE_PS='SGML_SEARCH_PATH=/usr/local/share/sgml -B latex --papersize=letter --output=ps' MAKE_TEXT='SGML_SEARCH_PATH=/usr/local/share/sgml GROFF_NO_SGR=y -B txt' MESA_SOURCE='' MISC_MAN_DIR='' MISC_MAN_SUFFIX='' MITSHM_FALSE='#' MITSHM_TRUE='' MKDIR_P='/usr/local/bin/gmkdir -p' MULTIBUFFER_FALSE='' MULTIBUFFER_TRUE='#' NEED_STRLCAT_FALSE='' NEED_STRLCAT_TRUE='#' NEED_VSNPRINTF_FALSE='' NEED_VSNPRINTF_TRUE='#' NM='/usr/bin/nm -B' NMEDIT='' OBJC='' OBJCCLD='' OBJCDEPMODE='' OBJCFLAGS='' OBJCLINK='' OBJDUMP='objdump' OBJEXT='o' OTOOL64='' OTOOL='' PACKAGE='xorg-server' PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=xorg' PACKAGE_NAME='xorg-server' PACKAGE_STRING='xorg-server 1.6.1' PACKAGE_TARNAME='xorg-server' PACKAGE_VERSION='1.6.1' PATH_SEPARATOR=':' PCIACCESS_CFLAGS='' PCIACCESS_LIBS='' PCI_TXT_IDS_PATH='' PERL='' PKG_CONFIG='/usr/local/bin/pkg-config' PPC_VIDEO_FALSE='' PPC_VIDEO_TRUE='#' PROJECTROOT='' PS2PDF='/usr/local/bin/ps2pdf' RANLIB='ranlib' RAWCPP='/usr/bin/cpp' RAWCPPFLAGS='-undef -traditional' RECORD_FALSE='#' RECORD_TRUE='' RES_FALSE='#' RES_TRUE='' SCREENSAVER_FALSE='#' SCREENSAVER_TRUE='' SECURE_RPC_FALSE='#' SECURE_RPC_TRUE='' SED='/usr/bin/sed' SERVER_MISC_CONFIG_PATH='/usr/local/lib/xorg' SET_MAKE='' SHELL='/bin/sh' SOLARIS_ASM_CFLAGS='' SOLARIS_ASM_INLINE_FALSE='' SOLARIS_ASM_INLINE_TRUE='' SOLARIS_INOUT_ARCH='' SOLARIS_USL_CONSOLE_FALSE='' SOLARIS_USL_CONSOLE_TRUE='' SPARC64_VIDEO_FALSE='' SPARC64_VIDEO_TRUE='#' STANDALONE_XPBPROXY_FALSE='' STANDALONE_XPBPROXY_TRUE='' STRIP='strip' TSLIB_CFLAGS='' TSLIB_FALSE='' TSLIB_LIBS='' TSLIB_TRUE='' UTILS_SYS_LIBS='' VENDOR_MAN_VERSION='Version 1.6.1' VENDOR_NAME='The X.Org Foundation' VENDOR_NAME_SHORT='X.Org' VENDOR_RELEASE='(((1) * 10000000) + ((6) * 100000) + ((1) * 1000) + 0)' VERSION='1.6.1' X11EXAMPLES_DEP_CFLAGS='' X11EXAMPLES_DEP_LIBS='' XACE_FALSE='#' XACE_TRUE='' XCALIBRATE_FALSE='' XCALIBRATE_TRUE='#' XCSECURITY_FALSE='' XCSECURITY_TRUE='#' XDMAUTH_FALSE='#' XDMAUTH_TRUE='' XDMCP_CFLAGS='-I/usr/local/include ' XDMCP_FALSE='#' XDMCP_LIBS='-L/usr/local/lib -lXdmcp ' XDMCP_TRUE='' XDMXCONFIG_DEP_CFLAGS='' XDMXCONFIG_DEP_LIBS='' XDMX_CFLAGS='' XDMX_LIBS='' XDMX_SYS_LIBS='' XEPHYR_CFLAGS='' XEPHYR_FALSE='' XEPHYR_INCS='' XEPHYR_LIBS='' XEPHYR_TRUE='' XF86BIGFONT_FALSE='' XF86BIGFONT_TRUE='#' XF86CONFIGFILE='' XF86UTILS_FALSE='#' XF86UTILS_TRUE='' XF86VIDMODE_CFLAGS='' XF86VIDMODE_FALSE='' XF86VIDMODE_LIBS='' XF86VIDMODE_TRUE='' XFAKESERVER_FALSE='' XFAKESERVER_TRUE='' XINERAMA_FALSE='#' XINERAMA_TRUE='' XKB_BASE_DIRECTORY='' XKB_BIN_DIRECTORY='' XKB_COMPILED_DIR='' XKM_OUTPUT_DIR='' XLIB_CFLAGS='-D_THREAD_SAFE -I/usr/local/include ' XLIB_LIBS='-L/usr/local/lib -lX11 ' XNESTMODULES_CFLAGS='' XNESTMODULES_LIBS='' XNEST_FALSE='' XNEST_LIBS='' XNEST_SYS_LIBS='' XNEST_TRUE='' XORG_BUS_BSDPCI_FALSE='' XORG_BUS_BSDPCI_TRUE='' XORG_BUS_LINUXPCI_FALSE='' XORG_BUS_LINUXPCI_TRUE='' XORG_BUS_SPARC_FALSE='' XORG_BUS_SPARC_TRUE='' XORG_CFLAGS='' XORG_FALSE='' XORG_INCS='' XORG_LIBS='' XORG_MODULES_CFLAGS='' XORG_MODULES_LIBS='' XORG_OS='' XORG_OS_SUBDIR='' XORG_SYS_LIBS='' XORG_TRUE='' XPBPROXY_CFLAGS='' XPBPROXY_LIBS='' XQUARTZ_FALSE='' XQUARTZ_TRUE='' XREGISTRY_FALSE='#' XREGISTRY_TRUE='' XRESEXAMPLES_DEP_CFLAGS='' XRESEXAMPLES_DEP_LIBS='' XSDLSERVER_FALSE='' XSDLSERVER_TRUE='' XSDL_INCS='' XSDL_LIBS='' XSELINUX_FALSE='' XSELINUX_TRUE='#' XSERVERCFLAGS_CFLAGS='' XSERVERCFLAGS_LIBS='' XSERVERLIBS_CFLAGS='' XSERVERLIBS_LIBS='' XSERVER_DTRACE_FALSE='' XSERVER_DTRACE_TRUE='#' XSERVER_LIBS='' XSERVER_SYS_LIBS='' XTSTEXAMPLES_DEP_CFLAGS='' XTSTEXAMPLES_DEP_LIBS='' XVFB_FALSE='' XVFB_LIBS='' XVFB_SYS_LIBS='' XVFB_TRUE='' XVMC_FALSE='#' XVMC_TRUE='' XV_FALSE='#' XV_TRUE='' XWINMODULES_CFLAGS='' XWINMODULES_LIBS='' XWIN_CLIPBOARD_FALSE='' XWIN_CLIPBOARD_TRUE='' XWIN_FALSE='' XWIN_GLX_WINDOWS_FALSE='' XWIN_GLX_WINDOWS_TRUE='' XWIN_LIBS='' XWIN_MULTIWINDOWEXTWM_FALSE='' XWIN_MULTIWINDOWEXTWM_TRUE='' XWIN_MULTIWINDOW_FALSE='' XWIN_MULTIWINDOW_TRUE='' XWIN_NATIVEGDI_FALSE='' XWIN_NATIVEGDI_TRUE='' XWIN_PRIMARYFB_FALSE='' XWIN_PRIMARYFB_TRUE='' XWIN_RANDR_FALSE='' XWIN_RANDR_TRUE='' XWIN_SERVER_NAME='' XWIN_SYS_LIBS='' XWIN_TRUE='' XWIN_XV_FALSE='' XWIN_XV_TRUE='' YACC='bison -y' YFLAGS='' __XCONFIGFILE__='' abi_ansic='' abi_extension='' abi_font='' abi_videodrv='' abi_xinput='' ac_ct_CC='cc' ac_ct_DUMPBIN='' am__fastdepCCAS_FALSE='#' am__fastdepCCAS_TRUE='' am__fastdepCC_FALSE='#' am__fastdepCC_TRUE='' am__fastdepOBJC_FALSE='' am__fastdepOBJC_TRUE='' am__include='include' am__isrc='' am__leading_dot='.' am__quote='' am__tar='${AMTAR} chof - "$$tardir"' am__untar='${AMTAR} xf -' bindir='${exec_prefix}/bin' build='amd64-portbld-freebsd7.2' build_alias='amd64-portbld-freebsd7.2' build_cpu='amd64' build_os='freebsd7.2' build_vendor='portbld' datadir='${datarootdir}' datarootdir='${prefix}/share' docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' driverdir='' dvidir='${docdir}' exec_prefix='NONE' extdir='' host='amd64-portbld-freebsd7.2' host_alias='' host_cpu='amd64' host_os='freebsd7.2' host_vendor='portbld' htmldir='${docdir}' includedir='${prefix}/include' infodir='/usr/local/info' install_sh='$(SHELL) /usr/ports/x11-servers/xorg-server/work/xorg-server-1.6.1/install-sh' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='/var' logdir='/var/log' lt_ECHO='echo' mandir='/usr/local/man' mkdir_p='/usr/local/bin/gmkdir -p' moduledir='${exec_prefix}/lib/xorg/modules' oldincludedir='/usr/include' pdfdir='${docdir}' prefix='/usr/local' program_transform_name='s,x,x,' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sdkdir='' sharedstatedir='${prefix}/com' sysconfdir='${prefix}/etc' target_alias='' ## ----------- ## ## confdefs.h. ## ## ----------- ## #define PACKAGE_NAME "xorg-server" #define PACKAGE_TARNAME "xorg-server" #define PACKAGE_VERSION "1.6.1" #define PACKAGE_STRING "xorg-server 1.6.1" #define PACKAGE_BUGREPORT "https://bugs.freedesktop.org/enter_bug.cgi?product=xorg" #define PACKAGE "xorg-server" #define VERSION "1.6.1" #define STDC_HEADERS 1 #define HAVE_SYS_TYPES_H 1 #define HAVE_SYS_STAT_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_MEMORY_H 1 #define HAVE_STRINGS_H 1 #define HAVE_INTTYPES_H 1 #define HAVE_STDINT_H 1 #define HAVE_UNISTD_H 1 #define HAVE_DLFCN_H 1 #define LT_OBJDIR ".libs/" #define YYTEXT_POINTER 1 #define HAVE_DIRENT_H 1 #define STDC_HEADERS 1 #define HAVE_FCNTL_H 1 #define HAVE_STDLIB_H 1 #define HAVE_STRING_H 1 #define HAVE_UNISTD_H 1 #define SIZEOF_UNSIGNED_LONG 8 #define _XSERVER64 1 #define USE_SYS_ENDIAN_H 1 #define bswap_16 bswap16 #define bswap_32 bswap32 #define bswap_64 bswap64 #define HAVE_VPRINTF 1 #define HAVE_GETEUID 1 #define HAVE_GETUID 1 #define HAVE_LINK 1 #define HAVE_MEMMOVE 1 #define HAVE_MEMSET 1 #define HAVE_MKSTEMP 1 #define HAVE_STRCHR 1 #define HAVE_STRRCHR 1 #define HAVE_STRTOL 1 #define HAVE_GETOPT 1 #define HAVE_GETOPT_LONG 1 #define HAVE_VSNPRINTF 1 #define HAVE_STRCASESTR 1 #define HAVE_FFS 1 #define HAVE_ALLOCA 1 #define HAS_GETDTABLESIZE 1 #define HAS_GETIFADDRS 1 #define HAS_GETPEEREID 1 #define HAS_STRLCPY 1 #define HAS_MMAP 1 #define HAVE_LIBM 1 #define HAVE_CBRT 1 #define HAVE_NDBM_H 1 #define HAVE_SYS_AGPIO_H 1 #define HAVE_SYS_MEMRANGE_H 1 #define HAS_MTRR_SUPPORT 1 #define HAVE_SYS_LINKER_H 1 #define HAVE_SYSV_IPC 1 #define USE_DEV_IO 1 #define CSRG_BASED 1 #define PCCONS_SUPPORT 1 #define PCVT_SUPPORT 1 #define SYSCONS_SUPPORT 1 #define PACKAGE_VERSION_MAJOR 1 #define PACKAGE_VERSION_MINOR 6 #define PACKAGE_VERSION_PATCHLEVEL 1 #define UNIXCONN 1 #define TCPCONN 1 #define IPv6 1 #define BSD44SOCKETS 1 #define HAVE_SOCKLEN_T 1 #define HAVE_AUTHDES_SECCREATE 1 #define HAVE_AUTHDES_CREATE 1 #define SECURE_RPC 1 #define HAVE_DBUS 1 #define CONFIG_HAL 1 #define CONFIG_NEED_DBUS 1 #define HAVE_CLOCK_GETTIME 1 #define MONOTONIC_CLOCK 1 #define XV 1 #define XvExtension 1 #define XvMCExtension 1 #define XREGISTRY 1 #define COMPOSITE 1 #define MITSHM 1 #define HAS_SHM 1 #define XRECORD 1 #define SCREENSAVER 1 #define RES 1 #define GLXEXT 1 #define AIGLX 1 #define XF86DRI 1 #define DRI2 1 #define DRI2_AIGLX 1 #define XINERAMA 1 #define PANORAMIX 1 #define XACE 1 #define DBE 1 #define DPMSExtension 1 #define RENDER 1 #define RANDR 1 #define XFIXES 1 #define DAMAGE 1 #define SHAPE 1 #define XKB 1 #define XKB_IN_SERVER 1 #define XKB_DFLT_DISABLED 0 #define XDMCP 1 #define HASXDMAUTH 1 #define COMPILEDDEFAULTFONTPATH "/usr/local/lib/X11/fonts/misc/,/usr/local/lib/X11/fonts/TTF/,/usr/local/lib/X11/fonts/OTF,/usr/local/lib/X11/fonts/Type1/,/usr/local/lib/X11/fonts/100dpi/,/usr/local/lib/X11/fonts/75dpi/" #define PCI_TXT_IDS_PATH "" #define SERVER_MISC_CONFIG_PATH "/usr/local/lib/xorg" #define BASE_FONT_PATH "/usr/local/lib/X11/fonts" #define DRI_DRIVER_PATH "/usr/local/lib/dri" #define XVENDORNAME "The X.Org Foundation" #define XVENDORNAMESHORT "X.Org" #define XORG_DATE "2009-4-14" #define XORG_MAN_VERSION "Version 1.6.1" #define BUILDERADDR "xorg@lists.freedesktop.org" #define OSNAME "FreeBSD 7.2-STABLE amd64" #define OSVENDOR "" #define BUILDERSTRING "" #define NO_LIBCWRAPPER 1 #define XTEST 1 #define XSYNC 1 #define XCMISC 1 #define BIGREQS 1 configure: exit 1 From award at googleinc.com Sun Jul 12 10:15:52 2009 From: award at googleinc.com (Google Incorporations Promotion Team) Date: Sun Jul 12 10:15:58 2009 Subject: GUK/877/798/2009 Message-ID: <200907120954.n6C9s4vL083669@king6.kingsnake.com> Google Incorporations. Stamford New Road, Altrincham Cheshire, WA14 1EP London, United Kingdom. Winning No: GUK/877/798/2009 Ticket No: GUK/699/33/2009 Notification Date: 10/07/2009 GOOGLE ANNIVERSARY WINNING NOTIFICATION. We wish to congratulate you once again on this note, for being part of our winners selected this year. This promotion was set-up to encourage the active users of the Google search engine and the Google ancillary services. Hence we do believe with your winning prize, you will continue to be active and patronage to the Google search engine. Google is now the biggest search engine worldwide and in an effort to make sure that it remains the most widely used search engine, we ran an online e-mail beta test which your email address won ?450,000. {Four Hundred And Fifty Thousand Great British Pounds Sterling} We wish to formally announce to you that you have successfully passed the requirements, statutory obligations, verifications, validations and satisfactory report Test conducted for all online winners. A winning cheque will be issued in your name by Google Promotion Award Team, You have therefore won the entire sum of ?450,000.00 {Four Hundred And Fifty Thousand Great British Pounds Sterling} and also a certificate of prize claims will be sent along side your winning cheque. Sir.Anderson Clarks Google Promotion Award Team Email: sir.anderson_clarks@live.co.uk You are advised to contact your Foreign Transfer Manager with the following details to avoid unnecessary delay and complications: VERIFICATION AND FUNDS RELEASE FORM. (1) Your contact address. (2) Your Tel/Fax numbers. (3) Your Nationality/Country. (4) Your Full Name/Sex. (5) Occupation/Age. (6) Ever won an online lottery? (7) Your Preferred Method of Receiving Your Prize (From Below) Mode Of Prize Remittance. (1)Cash Pick-Up (You coming Down to United Kingdom Personally to Pick Your Prize). (2)Courier Delivery Of your Certified Winning Cheque Name and other Winning Documents safely to you. The Google Promotion Award Team has discovered a huge number of double claims due to winners informing close friends relatives and third parties about their winning and also sharing their pin numbers. As a result of this, these friends try to claim the lottery on behalf of the real winners. The Google Promotion Award Team has reached a decision from headquarters that any double claim discovered by the Lottery Board will result to the canceling of that particular winning, making a loss for both the double claimer and the real winner, as it is taken that the real winner was the informer to the double claimer about the lottery. So you are hereby strongly advised once more to keep your winnings strictly confidential until you claim your prize. Congratulations from the Staffs & Members of the Google interactive Lotteries Board Commission. Sincerely, Dr. Leslie Spears. Google Promotion Award Team From jwdevel at gmail.com Mon Jul 13 01:19:12 2009 From: jwdevel at gmail.com (jw) Date: Mon Jul 13 01:19:19 2009 Subject: Problem with VESA and 1680x1050 Message-ID: I have a new box with an onboard GeForce 8200, which is not supported by the 'nv' driver yet. Therefore I'm trying to get X working with VESA. It works up to 1280x1024, but the (LCD) screen's native res. is 1680x1050, and displays other resolutions fairly blurry. I followed instructions in the handbook (http://www.freebsd.org/doc/en/books/handbook/x-config.html) but it did not help. Some details below, if anyone has any insights... I attached my log, but I think the relevant sections are: First VESA detects the mode (looks good to me) (II) VESA(0): Manufacturer's mask: 0 (II) VESA(0): Supported Future Video Modes: (II) VESA(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) VESA(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) VESA(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) VESA(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149 (II) VESA(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989 (II) VESA(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179 (II) VESA(0): #6: hsize: 1280 vsize 720 refresh: 60 vid: 49281 (II) VESA(0): #7: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) VESA(0): Supported additional Video Mode: (II) VESA(0): clock: 146.2 MHz Image Size: 408 x 255 mm (II) VESA(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0 (II) VESA(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0 (II) VESA(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 82 kHz, PixClock max 160 MHz (II) VESA(0): Monitor name: Acer X193W+ (II) VESA(0): Serial No: LBE090266310 (II) VESA(0): EDID (in hex): (II) VESA(0): 00ffffffffffff00047214005b017074 (II) VESA(0): 2f11010368291a782ec585a459499a24 (II) VESA(0): 125054bfef0081808140714f9500950f (II) VESA(0): b30081c0a94021399030621a274068b0 (II) VESA(0): 360098ff1000001c000000fd00384c1e (II) VESA(0): 5210000a202020202020000000fc0041 (II) VESA(0): 6365722058313933572b0a20000000ff (II) VESA(0): 004c42453039303236363331300a00a5 (II) VESA(0): EDID vendor "ACR", prod id 20 (II) VESA(0): Using EDID range info for horizontal sync (II) VESA(0): Using EDID range info for vertical refresh (II) VESA(0): Printing DDC gathered Modelines: (II) VESA(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz) But then later on says it can't find the mode: (II) VESA(0): Total Memory: 224 64KB banks (14336kB) (II) VESA(0): Monitor0: Using hsync range of 30.00-82.00 kHz (II) VESA(0): Monitor0: Using vrefresh range of 56.00-76.00 Hz (II) VESA(0): Monitor0: Using maximum pixel clock of 160.00 MHz (II) VESA(0): Not using mode "1680x1050" (no mode of this name) (II) VESA(0): Not using built-in mode "1600x1200" (no mode of this name) (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (==) VESA(0): Write-combining range (0x0,0x1000) was already clear (II) VESA(0): Not using built-in mode "640x400" (no mode of this name) (II) VESA(0): Not using built-in mode "320x400" (no mode of this name) (II) VESA(0): Not using built-in mode "320x240" (no mode of this name) (II) VESA(0): Not using built-in mode "320x200" (no mode of this name) (--) VESA(0): Virtual size is 1280x1024 (pitch 1280) (**) VESA(0): Built-in mode "1280x1024" (**) VESA(0): Built-in mode "1024x768" (**) VESA(0): Built-in mode "800x600" (**) VESA(0): Built-in mode "640x480" (**) VESA(0): Display dimensions: (410, 260) mm (**) VESA(0): DPI set to (79, 100) In particular the line: (II) VESA(0): Not using mode "1680x1050" (no mode of this name) So what gives? It seems like VESA is aware that the mode is supported, yet it drops it later on anyway. I do note that the Virtual size is shown as 1280x1024. However, I tried manually adding the line: Virtual 1680 1050 to my xorg.config. But it still gives the "Not using mode..." message, and the display is all screwy (wrong pitch for data being sent to the monitor, so everything is interleaved, i think). Also, I have read that a mode will be dropped if there is not enough memory to support it - but I have 14336kB - should be more than enough, afaik. (1680 x 1050 x 4 =~ 6891kB). Any other reason it would inexplicably drop the mode? As the handbook suggested, I tried adding: Modeline "1680x1050" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync to my "Monitor" section, but that doesn't change anything. Any ideas? -John -------------- next part -------------- A non-text attachment was scrubbed... Name: xorg.conf Type: application/octet-stream Size: 3295 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090713/a8acb50e/xorg.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: Xorg.0.log Type: application/octet-stream Size: 56281 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090713/a8acb50e/Xorg.0.obj From A.J.Caines at halplant.com Mon Jul 13 03:48:27 2009 From: A.J.Caines at halplant.com (Andrew J. Caines) Date: Mon Jul 13 03:48:35 2009 Subject: Problem with VESA and 1680x1050 In-Reply-To: References: Message-ID: <4A5AA977.8080200@halplant.com> John, > I have a new box with an onboard GeForce 8200, which is not supported > by the 'nv' driver yet. If you don't mind the closed code and aren't running 64 bit, you can use x11/nvidia-driver. Another option is x11-drivers/xf86-video-nouveau, but according to the status page[1], "Some gpu's integrated onto the motherboard do not function with nouveau for unknown reason, they include the geforce 8200/8300" You might be able to get more help if you provide the chip ID. > (II) VESA(0): Not using mode "1680x1050" (no mode of this name) So > what gives? It seems like VESA is aware that the mode is supported, > yet it drops it later on anyway. That's not a VESA mode[1]. [1] http://nouveau.freedesktop.org/wiki/FrontPage#Status [1] See e.g. http://en.wikipedia.org/wiki/VESA_BIOS_Extensions#Modes_defined_by_VESA since vesa.org is useless for getting any information -- -Andrew J. Caines- Unix Systems Engineer A.J.Caines@halplant.com FreeBSD/Linux/Solaris, Web/Mail/Proxy/... http://halplant.com:2001/ "Machines take me by surprise with great frequency" - Alan Turing From bugmaster at FreeBSD.org Mon Jul 13 11:07:13 2009 From: bugmaster at FreeBSD.org (FreeBSD bugmaster) Date: Mon Jul 13 11:10:12 2009 Subject: Current problem reports assigned to freebsd-x11@FreeBSD.org Message-ID: <200907131107.n6DB7B6Q040840@freefall.freebsd.org> Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o ports/135276 x11 x11/xorg: GUI running first time only while using Free o ports/134643 x11 [patch] x11-servers/xorg-server - Unbreak Xorg 7.4 ser o ports/134244 x11 x11/xorg: "intel" driver for Xorg is very broken o ports/134194 x11 graphics/dri fail on 7.2-RELEASE amd64 o ports/134132 x11 x11-servers/xorg-server: Intel i845 - xorg.conf with U o ports/134082 x11 x11/xdriinfo: xdriinfo-1.0.2 build fail o ports/133946 x11 x11-servers/xorg-server [patch] X crashes in xinerama o ports/133609 x11 x11/xorg crashes with vlc, intel video driver o ports/133482 x11 x11/libXext "Generic Event Extension not available" er o ports/133465 x11 x11/xorg: X crashes with mplayer -vo xv with xf86-vide o ports/133419 x11 Unable to build x11-drivers/xf86-video-nsc o ports/133175 x11 [patch] x11/pixman: enable SSE2 support autodetection o ports/132621 x11 x11/xorg tries to install event when deselected o ports/132403 x11 x11/xorg with Radeon X600 (R370): cannot re-initialize o ports/132100 x11 x11/xorg: Xorg server forgets pointer map after xlock o ports/132041 x11 x11/xorg: Broken Intel video driver o ports/131930 x11 [PATCH] x11-servers/xorg-server coredumps on exit o ports/131726 x11 x11-servers/xorg-server: xorg server messes with my eh o ports/131696 x11 x11-servers/xorg-server: hald core dumps make X11 unus o ports/131016 x11 x11/xorg - xorg-7.4 renders system unusable! s kern/130478 x11 [request] Port Linux kernel stub of nouveau to FreeBSD f ports/126812 x11 x11-drivers/xf86-video-ati - System freeze when exitin o ports/125883 x11 x11-fonts/xorg-fonts-cyrillic is installed, but fonts f ports/123137 x11 x11/libX11: missing ru_RU.UTF-8 locale o ports/122830 x11 x11/xorg: Error in I830WaitLpRing() s ports/117907 x11 x11-servers/mga_hal broken on 7.0-BETA (GLIBC error) o ports/116443 x11 x11-drivers/xf86-input-keyboard patch for USB jp106 ke 27 problems total. From rnoland at FreeBSD.org Mon Jul 13 15:09:36 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Mon Jul 13 15:09:43 2009 Subject: Problem with VESA and 1680x1050 In-Reply-To: <4A5AA977.8080200@halplant.com> References: <4A5AA977.8080200@halplant.com> Message-ID: <1247497763.1745.11.camel@balrog.2hip.net> On Sun, 2009-07-12 at 23:26 -0400, Andrew J. Caines wrote: > John, > > > I have a new box with an onboard GeForce 8200, which is not supported > > by the 'nv' driver yet. > > If you don't mind the closed code and aren't running 64 bit, you can use > x11/nvidia-driver. > > Another option is x11-drivers/xf86-video-nouveau, but according to the > status page[1], "Some gpu's integrated onto the motherboard do not > function with nouveau for unknown reason, they include the geforce > 8200/8300" You can try nouveau with and/or without my kernel patch for drm support. http://people.freebsd.org/~rnoland/drm-nouveau-043009.patch which should work with the current ports of libdrm and xf86-video-nouveau. http://people.freebsd.org/~rnoland/drm-nouveau-062309.patch should work with libdrm and nouveau from git. IGP chips should be supported. I would be interested to hear reports of success or failure either way. robert. > You might be able to get more help if you provide the chip ID. > > > (II) VESA(0): Not using mode "1680x1050" (no mode of this name) So > > what gives? It seems like VESA is aware that the mode is supported, > > yet it drops it later on anyway. > > That's not a VESA mode[1]. > > > [1] http://nouveau.freedesktop.org/wiki/FrontPage#Status > [1] See e.g. > http://en.wikipedia.org/wiki/VESA_BIOS_Extensions#Modes_defined_by_VESA > since vesa.org is useless for getting any information > -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090713/c4176e0a/attachment.pgp From jwdevel at gmail.com Tue Jul 14 05:56:52 2009 From: jwdevel at gmail.com (jw) Date: Tue Jul 14 05:56:59 2009 Subject: Problem with VESA and 1680x1050 In-Reply-To: <4A5AA977.8080200@halplant.com> References: <4A5AA977.8080200@halplant.com> Message-ID: On Sun, Jul 12, 2009 at 8:26 PM, Andrew J. Caines wrote: > John, > >> I have a new box with an onboard GeForce 8200, which is not supported >> ?by the 'nv' driver yet. > > If you don't mind the closed code and aren't running 64 bit, you can use > x11/nvidia-driver. Unfortunately (in this respect :) I am running amd64 - sorry, forgot to post that > > You might be able to get more help if you provide the chip ID. > Where do I get the chip ID? Or do you mean this line from the log? nVidia Corporation MCP78S [GeForce 8200] Co-Processor rev 162 >> (II) VESA(0): Not using mode "1680x1050" (no mode of this name) So >> what gives? It seems like VESA is aware that the mode is supported, >> yet it drops it later on anyway. > > That's not a VESA mode[1]. > Ah, so the VESA driver just can not ever provide this mode I take it... oh well ): From jwdevel at gmail.com Tue Jul 14 05:59:00 2009 From: jwdevel at gmail.com (jw) Date: Tue Jul 14 05:59:06 2009 Subject: Problem with VESA and 1680x1050 In-Reply-To: <1247497763.1745.11.camel@balrog.2hip.net> References: <4A5AA977.8080200@halplant.com> <1247497763.1745.11.camel@balrog.2hip.net> Message-ID: On Mon, Jul 13, 2009 at 8:09 AM, Robert Noland wrote: > > You can try nouveau with and/or without my kernel patch for drm support. > > http://people.freebsd.org/~rnoland/drm-nouveau-043009.patch > > which should work with the current ports of libdrm and > xf86-video-nouveau. > > http://people.freebsd.org/~rnoland/drm-nouveau-062309.patch > > should work with libdrm and nouveau from git. ?IGP chips should be > supported. ?I would be interested to hear reports of success or failure > either way. > Thanks - I'll give it a shot when I have a chance - does that support 64bit? (forgot to mention that in my original mail) -John From rnoland at FreeBSD.org Tue Jul 14 10:25:07 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Tue Jul 14 10:25:13 2009 Subject: Problem with VESA and 1680x1050 In-Reply-To: References: <4A5AA977.8080200@halplant.com> <1247497763.1745.11.camel@balrog.2hip.net> Message-ID: <1247567099.1745.15.camel@balrog.2hip.net> On Mon, 2009-07-13 at 22:58 -0700, jw wrote: > On Mon, Jul 13, 2009 at 8:09 AM, Robert Noland wrote: > > > > You can try nouveau with and/or without my kernel patch for drm support. > > > > http://people.freebsd.org/~rnoland/drm-nouveau-043009.patch > > > > which should work with the current ports of libdrm and > > xf86-video-nouveau. > > > > http://people.freebsd.org/~rnoland/drm-nouveau-062309.patch > > > > should work with libdrm and nouveau from git. IGP chips should be > > supported. I would be interested to hear reports of success or failure > > either way. > > > > Thanks - I'll give it a shot when I have a chance - does that support > 64bit? (forgot to mention that in my original mail) Yes, my test boxes are amd64. robert. > -John -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090714/c4fc081b/attachment.pgp From edwin at FreeBSD.org Wed Jul 15 22:30:16 2009 From: edwin at FreeBSD.org (edwin@FreeBSD.org) Date: Wed Jul 15 22:30:27 2009 Subject: ports/136806: [patch] graphics/libdrm: update to 2.4.12; Message-ID: <200907152230.n6FMUDHC083191@freefall.freebsd.org> Synopsis: [patch] graphics/libdrm: update to 2.4.12; Responsible-Changed-From-To: freebsd-ports-bugs->freebsd-x11 Responsible-Changed-By: edwin Responsible-Changed-When: Wed Jul 15 22:30:13 UTC 2009 Responsible-Changed-Why: Over to maintainer (via the GNATS Auto Assign Tool) http://www.freebsd.org/cgi/query-pr.cgi?pr=136806 From rnoland at FreeBSD.org Thu Jul 16 11:00:19 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Thu Jul 16 11:00:26 2009 Subject: ports/136806: [patch] graphics/libdrm: update to 2.4.12; Message-ID: <200907161100.n6GB0JTr000935@freefall.freebsd.org> The following reply was made to PR ports/136806; it has been noted by GNATS. From: Robert Noland To: bug-followup@FreeBSD.org, swell.k@gmail.com Cc: Subject: Re: ports/136806: [patch] graphics/libdrm: update to 2.4.12; Date: Thu, 16 Jul 2009 05:43:28 -0500 --=-jfJGtl4SKtrXLXwT40jm Content-Type: text/plain Content-Transfer-Encoding: quoted-printable I don't see any value enabling libdrm_radeon right now... AFAIK, it only provides the TTM/GEM api which we don't have support for. Otherwise, this all looks fine. robert. --=20 Robert Noland FreeBSD --=-jfJGtl4SKtrXLXwT40jm Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.11 (FreeBSD) iEYEABECAAYFAkpfBFAACgkQM4TrQ4qfROOkvwCeJh/AxXoS5HgJT8OBYpgODX+o QbwAniBwQ36gZ3uqtcE1L1pdM7V8ajpD =tLd7 -----END PGP SIGNATURE----- --=-jfJGtl4SKtrXLXwT40jm-- From rakadambi at gmail.com Thu Jul 16 12:20:05 2009 From: rakadambi at gmail.com (R. Aditya Kadambi) Date: Thu Jul 16 12:20:22 2009 Subject: ports/136806: [patch] graphics/libdrm: update to 2.4.12 Message-ID: <39f90aa30907160520i3fd9a301y2ebcf805ebbfb135@mail.gmail.com> > Date: Thu, 16 Jul 2009 11:00:19 GMT > From: Robert Noland > Subject: Re: ports/136806: [patch] graphics/libdrm: update to 2.4.12; > To: freebsd-x11@FreeBSD.org > Message-ID: <200907161100.n6GB0JTr000935@freefall.freebsd.org> > > The following reply was made to PR ports/136806; it has been noted by > GNATS. > > From: Robert Noland > To: bug-followup@FreeBSD.org, swell.k@gmail.com > Cc: > Subject: Re: ports/136806: [patch] graphics/libdrm: update to 2.4.12; > Date: Thu, 16 Jul 2009 05:43:28 -0500 > > --=-jfJGtl4SKtrXLXwT40jm > Content-Type: text/plain > Content-Transfer-Encoding: quoted-printable > > I don't see any value enabling libdrm_radeon right now... AFAIK, it only > provides the TTM/GEM api which we don't have support for. > > Otherwise, this all looks fine. > > robert. > > --=20 > Robert Noland > FreeBSD Is there any work on getting KMS/memory manager (for ATI cards) into the FreeBSD kernel? . I see some activity in the mesa/drm tree -Aditya From rnoland at FreeBSD.org Thu Jul 16 12:30:31 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Thu Jul 16 12:30:37 2009 Subject: ports/136806: [patch] graphics/libdrm: update to 2.4.12 In-Reply-To: <39f90aa30907160520i3fd9a301y2ebcf805ebbfb135@mail.gmail.com> References: <39f90aa30907160520i3fd9a301y2ebcf805ebbfb135@mail.gmail.com> Message-ID: <1247747419.1710.28.camel@balrog.2hip.net> On Thu, 2009-07-16 at 08:20 -0400, R. Aditya Kadambi wrote: > > Date: Thu, 16 Jul 2009 11:00:19 GMT > > From: Robert Noland > > Subject: Re: ports/136806: [patch] graphics/libdrm: update to 2.4.12; > > To: freebsd-x11@FreeBSD.org > > Message-ID: <200907161100.n6GB0JTr000935@freefall.freebsd.org> > > > > The following reply was made to PR ports/136806; it has been noted by > > GNATS. > > > > From: Robert Noland > > To: bug-followup@FreeBSD.org, swell.k@gmail.com > > Cc: > > Subject: Re: ports/136806: [patch] graphics/libdrm: update to 2.4.12; > > Date: Thu, 16 Jul 2009 05:43:28 -0500 > > > > --=-jfJGtl4SKtrXLXwT40jm > > Content-Type: text/plain > > Content-Transfer-Encoding: quoted-printable > > > > I don't see any value enabling libdrm_radeon right now... AFAIK, it only > > provides the TTM/GEM api which we don't have support for. > > > > Otherwise, this all looks fine. > > > > robert. > > > > --=20 > > Robert Noland > > FreeBSD > > > Is there any work on getting KMS/memory manager (for ATI cards) into the > FreeBSD kernel? . I see some activity in the mesa/drm tree I'm not actively working on it right now... Radeon is using TTM as the backend, while presenting a GEM api to userland. Nouveau will do the same thing. Via will also use the TTM backend, though I'm not certain how it will present to userland. I still haven't managed to get my hands on any VIA hardware, so I'm a bit out of the loop there. As far as KMS goes, I anticipate much of the code for Intel/Radeon/Nouveau to be fairly portable. The tricky part is figuring out how to hook it into our console rendering code, which I still don't fully understand. We will also need to figure out how to handle hardware that we don't have KMS support for. robert. > -Aditya > _______________________________________________ > freebsd-x11@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-x11 > To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090716/2860509f/attachment.pgp From swell.k at gmail.com Thu Jul 16 14:20:06 2009 From: swell.k at gmail.com (Anonymous) Date: Thu Jul 16 14:20:18 2009 Subject: ports/136806: [patch] graphics/libdrm: update to 2.4.12; Message-ID: <200907161420.n6GEK6Ju054723@freefall.freebsd.org> The following reply was made to PR ports/136806; it has been noted by GNATS. From: Anonymous To: Robert Noland Cc: bug-followup@FreeBSD.org Subject: Re: ports/136806: [patch] graphics/libdrm: update to 2.4.12; Date: Thu, 16 Jul 2009 18:13:38 +0400 Robert Noland writes: > I don't see any value enabling libdrm_radeon right now... AFAIK, it only > provides the TTM/GEM api which we don't have support for. I thought the support for that api in libdrm may be useful sometime in future. It'll reduce one step to use it once we have support for it. Anyway, I don't mind if you remove that option and skip pkg-plist diff for it. > Otherwise, this all looks fine. > > robert. From rnoland at FreeBSD.org Thu Jul 16 14:27:13 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Thu Jul 16 14:27:19 2009 Subject: ports/136806: [patch] graphics/libdrm: update to 2.4.12; In-Reply-To: <200907161420.n6GEK6Ju054723@freefall.freebsd.org> References: <200907161420.n6GEK6Ju054723@freefall.freebsd.org> Message-ID: <1247754422.1481.1.camel@balrog.2hip.net> On Thu, 2009-07-16 at 14:20 +0000, Anonymous wrote: > The following reply was made to PR ports/136806; it has been noted by GNATS. > > From: Anonymous > To: Robert Noland > Cc: bug-followup@FreeBSD.org > Subject: Re: ports/136806: [patch] graphics/libdrm: update to 2.4.12; > Date: Thu, 16 Jul 2009 18:13:38 +0400 > > Robert Noland writes: > > > I don't see any value enabling libdrm_radeon right now... AFAIK, it only > > provides the TTM/GEM api which we don't have support for. > > I thought the support for that api in libdrm may be useful sometime in > future. It'll reduce one step to use it once we have support for it. > Anyway, I don't mind if you remove that option and skip pkg-plist diff > for it. We will turn it on when it does something useful... For now, let's just leave it alone. robert. > > Otherwise, this all looks fine. > > > > robert. > _______________________________________________ > freebsd-x11@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-x11 > To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090716/5fb2fa39/attachment.pgp From rnoland at FreeBSD.org Thu Jul 16 22:22:54 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Thu Jul 16 22:22:59 2009 Subject: r6/7xx 3d patch (not ready for prime time) Message-ID: <1247782965.1760.10.camel@balrog.2hip.net> I just posted a patch for drm that adds the current bits needed to play around with the r6/7xx 3d code. http://people.freebsd.org/~rnoland/drm-r6-7xx-3d-071609.patch This is still early code and will likely change somewhat before it is all over. Right now, glxgears will at least run, though it is quite slow due to a memcpy() in the mesa code that needs to be handled in hardware. If you want to mess with it, you will need libdrm, xf86-video-(ati|radeonhd) and mesa (r6xx-rewrite branch) from git. OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: Mesa DRI R600 (unknown 9498) 20090101 TCL OpenGL version string: 1.4 Mesa 7.6-devel robert. -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090716/34c0fde4/attachment.pgp From rnoland at FreeBSD.org Fri Jul 17 20:24:31 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Fri Jul 17 20:24:37 2009 Subject: r6/7xx 3d patch (not ready for prime time) In-Reply-To: <1247782965.1760.10.camel@balrog.2hip.net> References: <1247782965.1760.10.camel@balrog.2hip.net> Message-ID: <1247862234.10530.11.camel@balrog.2hip.net> On Thu, 2009-07-16 at 17:22 -0500, Robert Noland wrote: > I just posted a patch for drm that adds the current bits needed to play > around with the r6/7xx 3d code. > > http://people.freebsd.org/~rnoland/drm-r6-7xx-3d-071609.patch > > This is still early code and will likely change somewhat before it is > all over. Right now, glxgears will at least run, though it is quite > slow due to a memcpy() in the mesa code that needs to be handled in > hardware. If you want to mess with it, you will need libdrm, > xf86-video-(ati|radeonhd) and mesa (r6xx-rewrite branch) from git. The R600 dri driver has been merged to mesa master, so you will no longer need the r6xx-rewrite branch. robert. > OpenGL vendor string: Advanced Micro Devices, Inc. > OpenGL renderer string: Mesa DRI R600 (unknown 9498) 20090101 TCL > OpenGL version string: 1.4 Mesa 7.6-devel > > robert. -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090717/b060c365/attachment.pgp From vehemens at verizon.net Sat Jul 18 10:28:13 2009 From: vehemens at verizon.net (vehemens) Date: Sat Jul 18 10:28:20 2009 Subject: r6/7xx 3d patch (not ready for prime time) In-Reply-To: <1247862234.10530.11.camel@balrog.2hip.net> References: <1247782965.1760.10.camel@balrog.2hip.net> <1247862234.10530.11.camel@balrog.2hip.net> Message-ID: <200907180230.36957.vehemens@verizon.net> On Friday 17 July 2009 01:23:54 pm Robert Noland wrote: > On Thu, 2009-07-16 at 17:22 -0500, Robert Noland wrote: > > I just posted a patch for drm that adds the current bits needed to play > > around with the r6/7xx 3d code. > > > > http://people.freebsd.org/~rnoland/drm-r6-7xx-3d-071609.patch The only thing that's jumped out at me so far is that a number of radeon_drv.h macros are missing R600_WAIT_UNTIL. > > This is still early code and will likely change somewhat before it is > > all over. Right now, glxgears will at least run, though it is quite > > slow due to a memcpy() in the mesa code that needs to be handled in > > hardware. If you want to mess with it, you will need libdrm, > > xf86-video-(ati|radeonhd) and mesa (r6xx-rewrite branch) from git. > > The R600 dri driver has been merged to mesa master, so you will no > longer need the r6xx-rewrite branch. > > robert. > > > OpenGL vendor string: Advanced Micro Devices, Inc. > > OpenGL renderer string: Mesa DRI R600 (unknown 9498) 20090101 TCL > > OpenGL version string: 1.4 Mesa 7.6-devel > > > > robert. From rnoland at FreeBSD.org Sat Jul 18 12:53:56 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Sat Jul 18 12:54:30 2009 Subject: r6/7xx 3d patch (not ready for prime time) In-Reply-To: <200907180230.36957.vehemens@verizon.net> References: <1247782965.1760.10.camel@balrog.2hip.net> <1247862234.10530.11.camel@balrog.2hip.net> <200907180230.36957.vehemens@verizon.net> Message-ID: <1247921622.1738.1.camel@balrog.2hip.net> On Sat, 2009-07-18 at 02:30 -0700, vehemens wrote: > On Friday 17 July 2009 01:23:54 pm Robert Noland wrote: > > On Thu, 2009-07-16 at 17:22 -0500, Robert Noland wrote: > > > I just posted a patch for drm that adds the current bits needed to play > > > around with the r6/7xx 3d code. > > > > > > http://people.freebsd.org/~rnoland/drm-r6-7xx-3d-071609.patch > > The only thing that's jumped out at me so far is that a number of radeon_drv.h > macros are missing R600_WAIT_UNTIL. Hrm, yes... It looks like I missed that. robert. > > > This is still early code and will likely change somewhat before it is > > > all over. Right now, glxgears will at least run, though it is quite > > > slow due to a memcpy() in the mesa code that needs to be handled in > > > hardware. If you want to mess with it, you will need libdrm, > > > xf86-video-(ati|radeonhd) and mesa (r6xx-rewrite branch) from git. > > > > The R600 dri driver has been merged to mesa master, so you will no > > longer need the r6xx-rewrite branch. > > > > robert. > > > > > OpenGL vendor string: Advanced Micro Devices, Inc. > > > OpenGL renderer string: Mesa DRI R600 (unknown 9498) 20090101 TCL > > > OpenGL version string: 1.4 Mesa 7.6-devel > > > > > > robert. > > -- Robert Noland FreeBSD -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 196 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090718/a8ee8d6b/attachment.pgp From olgeni at FreeBSD.org Sun Jul 19 16:09:30 2009 From: olgeni at FreeBSD.org (Jimmy Olgeni) Date: Sun Jul 19 16:09:36 2009 Subject: [PATCH] x11/xdm and xdm-config Message-ID: Hi, I noticed that xdm-config should probably be remove from pkg-plist, since it is already handled by @exec and @unexec. Also, it causes a customized xdm-config to be removed by pkg_delete. Regards, Jimmy Index: Makefile =================================================================== RCS file: /home/pcvs/ports/x11/xdm/Makefile,v retrieving revision 1.8 diff -u -r1.8 Makefile --- Makefile 23 Jan 2009 16:28:18 -0000 1.8 +++ Makefile 19 Jul 2009 15:55:29 -0000 @@ -7,7 +7,7 @@ PORTNAME= xdm PORTVERSION= 1.1.8 -PORTREVISION= 1 +PORTREVISION= 2 CATEGORIES= x11 MAINTAINER= x11@FreeBSD.org Index: pkg-plist =================================================================== RCS file: /home/pcvs/ports/x11/xdm/pkg-plist,v retrieving revision 1.3 diff -u -r1.3 pkg-plist --- pkg-plist 2 Jul 2007 17:35:12 -0000 1.3 +++ pkg-plist 19 Jul 2009 15:55:29 -0000 @@ -6,7 +6,6 @@ lib/X11/xdm/libXdmGreet.so lib/X11/xdm/pixmaps/xorg-bw.xpm lib/X11/xdm/pixmaps/xorg.xpm -lib/X11/xdm/xdm-config share/X11/app-defaults/Chooser @unexec if cmp -s %D/%%EXAMPLESDIR%%/GiveConsole %D/lib/X11/xdm/GiveConsole; then rm -f %D/lib/X11/xdm/GiveConsole; fi @unexec if cmp -s %D/%%EXAMPLESDIR%%/TakeConsole %D/lib/X11/xdm/TakeConsole; then rm -f %D/lib/X11/xdm/TakeConsole; fi From swell.k at gmail.com Sun Jul 19 22:50:04 2009 From: swell.k at gmail.com (Anonymous) Date: Sun Jul 19 22:50:10 2009 Subject: ports/136806: [patch] graphics/libdrm: update to 2.4.12; Message-ID: <200907192250.n6JMo3ph088213@freefall.freebsd.org> The following reply was made to PR ports/136806; it has been noted by GNATS. From: Anonymous To: bug-followup@FreeBSD.org Cc: Subject: Re: ports/136806: [patch] graphics/libdrm: update to 2.4.12; Date: Mon, 20 Jul 2009 02:40:34 +0400 Here are updated patches: - new nouveau snapshot 20090716.b1b2330 (tested on Xserver 1.6.1) - remove installation of experimental radeon api from libdrm --- libdrm.diff begins here --- Index: graphics/libdrm/Makefile =================================================================== RCS file: /home/csup/ports/graphics/libdrm/Makefile,v retrieving revision 1.16 diff -u -p -r1.16 Makefile --- graphics/libdrm/Makefile 16 May 2009 00:35:42 -0000 1.16 +++ graphics/libdrm/Makefile 19 Jul 2009 22:19:06 -0000 @@ -6,7 +6,7 @@ # PORTNAME= libdrm -PORTVERSION= 2.4.11 +PORTVERSION= 2.4.12 CATEGORIES= graphics x11 MASTER_SITES= http://dri.freedesktop.org/libdrm/ Index: graphics/libdrm/distinfo =================================================================== RCS file: /home/csup/ports/graphics/libdrm/distinfo,v retrieving revision 1.12 diff -u -p -r1.12 distinfo --- graphics/libdrm/distinfo 16 May 2009 00:35:42 -0000 1.12 +++ graphics/libdrm/distinfo 19 Jul 2009 22:18:58 -0000 @@ -1,3 +1,3 @@ -MD5 (libdrm-2.4.11.tar.bz2) = e0e66fae165d0b665b61e9516bf33ade -SHA256 (libdrm-2.4.11.tar.bz2) = 5e07ec4b644f50160900d4281a74dd1cbf1535cfe4ab24e0c28ae5b038836a8c -SIZE (libdrm-2.4.11.tar.bz2) = 407127 +MD5 (libdrm-2.4.12.tar.bz2) = 15d26219c046377d5fcb1cb37e7b03a2 +SHA256 (libdrm-2.4.12.tar.bz2) = 89e3b16aff13c5219d13b08f9143793f74777b752d87c760ec6e52fb8676bd31 +SIZE (libdrm-2.4.12.tar.bz2) = 414175 --- libdrm.diff ends here --- --- xf86-video-nouveau.diff begins here --- Index: x11-drivers/xf86-video-nouveau/Makefile =================================================================== RCS file: /home/csup/ports/x11-drivers/xf86-video-nouveau/Makefile,v retrieving revision 1.6 diff -u -p -r1.6 Makefile --- x11-drivers/xf86-video-nouveau/Makefile 16 May 2009 14:01:34 -0000 1.6 +++ x11-drivers/xf86-video-nouveau/Makefile 17 Jul 2009 18:12:57 -0000 @@ -20,12 +20,17 @@ MAN4= nouveau.4x MAKE_JOBS_SAFE= yes -SNAPDATE= 20090514 -SNAPREV= 9656762 +SNAPDATE= 20090716 +SNAPREV= b1b2330 post-configure: ${REINPLACE_CMD} '/NV_DRIVER_DATE/s/".*"/"${SNAPDATE}.${SNAPREV}"/' ${WRKSRC}/config.h +post-install: .SILENT + ${ECHO_MSG} + ${CAT} ${PKGMESSAGE} + ${ECHO_MSG} + GIT_WORK= ${WRKDIR}/${PORTNAME}.git-clone GIT_REV= $$(date -ur$$(git log --pretty=format:%ct -1 \ ) +%Y%m%d).$$(git log --pretty=format:%h -1) Index: x11-drivers/xf86-video-nouveau/distinfo =================================================================== RCS file: /home/csup/ports/x11-drivers/xf86-video-nouveau/distinfo,v retrieving revision 1.3 diff -u -p -r1.3 distinfo --- x11-drivers/xf86-video-nouveau/distinfo 16 May 2009 14:01:34 -0000 1.3 +++ x11-drivers/xf86-video-nouveau/distinfo 17 Jul 2009 18:13:03 -0000 @@ -1,3 +1,3 @@ -MD5 (xorg/driver/xf86-video-nouveau-0.0.10.20090514.9656762.tar.bz2) = 86aff4923c1b2143aae0f7f2ac65b5a3 -SHA256 (xorg/driver/xf86-video-nouveau-0.0.10.20090514.9656762.tar.bz2) = eaa2f230770338c08839d0c6f7211ef9624a19eb305689f3f012df3ab92cb5c7 -SIZE (xorg/driver/xf86-video-nouveau-0.0.10.20090514.9656762.tar.bz2) = 556039 +MD5 (xorg/driver/xf86-video-nouveau-0.0.10.20090716.b1b2330.tar.bz2) = f3d1e4781920d503c62c5f86a6d7a12b +SHA256 (xorg/driver/xf86-video-nouveau-0.0.10.20090716.b1b2330.tar.bz2) = d4b64ed8517fc9f64fc614064ca17737a4da9dcc857a2b968155622af70c3050 +SIZE (xorg/driver/xf86-video-nouveau-0.0.10.20090716.b1b2330.tar.bz2) = 547530 Index: x11-drivers/xf86-video-nouveau/pkg-message =================================================================== RCS file: x11-drivers/xf86-video-nouveau/pkg-message diff -N x11-drivers/xf86-video-nouveau/pkg-message --- /dev/null 1 Jan 1970 00:00:00 -0000 +++ x11-drivers/xf86-video-nouveau/pkg-message 15 Jul 2009 22:19:29 -0000 @@ -0,0 +1,15 @@ +The DRM part is still not in the kernel tree and will not be there +until it stabilized. It won't happen anytime soon. So, consider using +the following patch in the meantime unless you don't want any hardware +accelerated 2D like EXA and Xvideo. + +http://people.freebsd.org/~rnoland/drm-nouveau-062309.patch + +Installing it should be as simple as below procedure provided you have +base sources in /usr/src. + + # cd /usr/src/sys + # fetch http://people.freebsd.org/~rnoland/drm-nouveau-062309.patch + # patch -sp0 -i drm-nouveau-062309.patch + # cd modules/drm + # make depend all install --- xf86-video-nouveau.diff ends here --- From yuri.pankov at gmail.com Sun Jul 19 23:10:06 2009 From: yuri.pankov at gmail.com (Yuri Pankov) Date: Sun Jul 19 23:10:17 2009 Subject: ports/136806: [patch] graphics/libdrm: update to 2.4.12; Message-ID: <200907192310.n6JNA6Fv002267@freefall.freebsd.org> The following reply was made to PR ports/136806; it has been noted by GNATS. From: Yuri Pankov To: bug-followup@freebsd.org Cc: Subject: Re: ports/136806: [patch] graphics/libdrm: update to 2.4.12; Date: Mon, 20 Jul 2009 03:05:21 +0400 On Sun, Jul 19, 2009 at 10:50:03PM +0000, Anonymous wrote: > +Installing it should be as simple as below procedure provided you have > +base sources in /usr/src. > + > + # cd /usr/src/sys You also need to create modules/drm/nouveau, otherwise modules/drm/nouveau/Makefile isn't created: # mkdir modules/drm/nouveau > + # fetch http://people.freebsd.org/~rnoland/drm-nouveau-062309.patch > + # patch -sp0 -i drm-nouveau-062309.patch > + # cd modules/drm > + # make depend all install > --- xf86-video-nouveau.diff ends here --- Thanks for updating the driver. Yuri From swell.k at gmail.com Mon Jul 20 00:10:08 2009 From: swell.k at gmail.com (Anonymous) Date: Mon Jul 20 00:10:15 2009 Subject: ports/136806: [patch] graphics/libdrm: update to 2.4.12; Message-ID: <200907200010.n6K0A8vQ047345@freefall.freebsd.org> The following reply was made to PR ports/136806; it has been noted by GNATS. From: Anonymous To: Yuri Pankov Cc: bug-followup@freebsd.org Subject: Re: ports/136806: [patch] graphics/libdrm: update to 2.4.12; Date: Mon, 20 Jul 2009 04:02:15 +0400 Yuri Pankov writes: > On Sun, Jul 19, 2009 at 10:50:03PM +0000, Anonymous wrote: > > > +Installing it should be as simple as below procedure provided you have > > +base sources in /usr/src. > > + > > + # cd /usr/src/sys > > You also need to create modules/drm/nouveau, otherwise modules/drm/nouveau/Makefile isn't created: > # mkdir modules/drm/nouveau No, you don't need to create the directory explicitly. It should be created by patch(1) for you because `-p0' option was specified. > > > + # fetch http://people.freebsd.org/~rnoland/drm-nouveau-062309.patch > > + # patch -sp0 -i drm-nouveau-062309.patch > > + # cd modules/drm > > + # make depend all install > > --- xf86-video-nouveau.diff ends here --- > > Thanks for updating the driver. > > Yuri From bugmaster at FreeBSD.org Mon Jul 20 11:07:07 2009 From: bugmaster at FreeBSD.org (FreeBSD bugmaster) Date: Mon Jul 20 11:10:08 2009 Subject: Current problem reports assigned to freebsd-x11@FreeBSD.org Message-ID: <200907201107.n6KB765X002496@freefall.freebsd.org> Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o ports/136806 x11 [patch] graphics/libdrm: update to 2.4.12; o ports/135276 x11 x11/xorg: GUI running first time only while using Free o ports/134643 x11 [patch] x11-servers/xorg-server - Unbreak Xorg 7.4 ser o ports/134244 x11 x11/xorg: "intel" driver for Xorg is very broken o ports/134194 x11 graphics/dri fail on 7.2-RELEASE amd64 o ports/134132 x11 x11-servers/xorg-server: Intel i845 - xorg.conf with U o ports/134082 x11 x11/xdriinfo: xdriinfo-1.0.2 build fail o ports/133946 x11 x11-servers/xorg-server [patch] X crashes in xinerama o ports/133609 x11 x11/xorg crashes with vlc, intel video driver o ports/133482 x11 x11/libXext "Generic Event Extension not available" er o ports/133465 x11 x11/xorg: X crashes with mplayer -vo xv with xf86-vide o ports/133419 x11 Unable to build x11-drivers/xf86-video-nsc o ports/133175 x11 [patch] x11/pixman: enable SSE2 support autodetection o ports/132621 x11 x11/xorg tries to install event when deselected o ports/132403 x11 x11/xorg with Radeon X600 (R370): cannot re-initialize o ports/132100 x11 x11/xorg: Xorg server forgets pointer map after xlock o ports/132041 x11 x11/xorg: Broken Intel video driver o ports/131930 x11 [PATCH] x11-servers/xorg-server coredumps on exit o ports/131726 x11 x11-servers/xorg-server: xorg server messes with my eh o ports/131696 x11 x11-servers/xorg-server: hald core dumps make X11 unus o ports/131016 x11 x11/xorg - xorg-7.4 renders system unusable! s kern/130478 x11 [request] Port Linux kernel stub of nouveau to FreeBSD f ports/126812 x11 x11-drivers/xf86-video-ati - System freeze when exitin o ports/125883 x11 x11-fonts/xorg-fonts-cyrillic is installed, but fonts f ports/123137 x11 x11/libX11: missing ru_RU.UTF-8 locale o ports/122830 x11 x11/xorg: Error in I830WaitLpRing() s ports/117907 x11 x11-servers/mga_hal broken on 7.0-BETA (GLIBC error) o ports/116443 x11 x11-drivers/xf86-input-keyboard patch for USB jp106 ke 28 problems total. From romeoparas at gmail.com Tue Jul 21 03:36:51 2009 From: romeoparas at gmail.com (Romeo Paras) Date: Tue Jul 21 03:36:57 2009 Subject: Cacti installation error Message-ID: <47f6550a0907202016j106f2621p17128b2a6fc42e46@mail.gmail.com> Hi all, Please find the attached file, I installed CACTI on my freebsd 7.1 machine and on the process i received these errors. please send me your comments thanks.. I'm a newbie in freebsd.. -------------- next part -------------- ===> Script "configure" failed unexpectedly. Please report the problem to x11@FreeBSD.org [maintainer] and attach the "/usr/ports/graphics/libGL/work/Mesa-7.4.4/config.log" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. an `ls /var/db/pkg`). *** Error code 1 Stop in /usr/ports/graphics/libGL. *** Error code 1 Stop in /usr/ports/graphics/libGLU. *** Error code 1 Stop in /usr/ports/graphics/glitz. *** Error code 1 Stop in /usr/ports/graphics/cairo. *** Error code 1 Stop in /usr/ports/graphics/cairo. *** Error code 1 Stop in /usr/ports/databases/rrdtool. *** Error code 1 Stop in /usr/ports/databases/rrdtool. *** Error code 1 Stop in /usr/ports/net-mgmt/cacti. ******************************************************************** Packages installed in the system: STk-4.0.1_2 kbproto-1.0.3 makedepend-1.0.1,1 TenDRA-4.20051112 libICE-1.0.4_1,1 mysql-client-5.0.83 autoconf-2.62 libSM-1.0.3_1,1 nagios-3.0.3 autoconf-wrapper-20071109 libX11-1.1.3_1,1 nagios-plugins-1.4.12_1,1 automake-1.9.6_3 libXau-1.0.3_2 net-snmp-5.4.2.1_5 automake-wrapper-20071109 libXaw-1.0.4_1,1 p5-XML-Parser-2.36 bigreqsproto-1.0.2 libXdamage-1.1.1 p5-gettext-1.05_2 cvsup-16.1h_4 libXdmcp-1.0.2_1 perl-5.8.8_1 damageproto-1.1.0_2 libXext-1.0.3,1 pixman-0.10.0_2 dlmalloc-2.8.3 libXfixes-4.0.3_1 pkg-config-0.23_1 dmxproto-2.2.2 libXmu-1.0.3,1 png-1.2.32 dri2proto-2.0 libXp-1.0.0,1 portmanager-0.4.1_9 expat-2.0.1 libXpm-3.5.7 printproto-1.0.3 ezm3-1.2_1 libXrender-0.9.4_1 python26-2.6.2_1 fixesproto-4.0 libXt-1.0.5_1 quagga-0.99.10_3 fontconfig-2.6.0,1 libXxf86vm-1.0.2 renderproto-0.9.3 freetype2-2.3.7 libcheck-0.9.6 sather-1.2.2_1 gd-2.0.35,1 libdmx-1.0.2_1 tcl-8.4.19,1 gettext-0.17_1 libdrm-2.4.11 tk-8.4.19,2 glproto-1.4.10 libiconv-1.11_1 xcb-proto-1.5 gmake-3.81_3 libltdl-1.5.26 xcb-util-0.3.5 gofer-2.30b liboldX-1.0.1 xcmiscproto-1.1.2 gperf-3.0.3 libpthread-stubs-0.1 xextproto-7.0.2 help2man-1.36.4_2 libtool-1.5.26 xf86bigfontproto-1.1.2 inputproto-1.4.2.1 libxcb-1.3 xf86vidmodeproto-2.2.2 intltool-0.40.6 libxml2-2.7.3 xproto-7.0.10_1 iperf-2.0.4 libxslt-1.1.24_2 xtrans-1.0.4 jpeg-6b_7 m4-1.4.11,1 From swell.k at gmail.com Tue Jul 21 04:44:53 2009 From: swell.k at gmail.com (Anonymous) Date: Tue Jul 21 04:44:59 2009 Subject: Cacti installation error In-Reply-To: <47f6550a0907202016j106f2621p17128b2a6fc42e46@mail.gmail.com> (Romeo Paras's message of "Tue, 21 Jul 2009 11:16:46 +0800") References: <47f6550a0907202016j106f2621p17128b2a6fc42e46@mail.gmail.com> Message-ID: <86y6qihdme.fsf@gmail.com> Romeo Paras writes: > Hi all, > > > Please find the attached file, I installed CACTI on my freebsd 7.1 machine > and on the process i received these errors. please send me your comments > thanks.. I'm a newbie in freebsd.. > > > ===> Script "configure" failed unexpectedly. > Please report the problem to x11@FreeBSD.org [maintainer] and attach the > "/usr/ports/graphics/libGL/work/Mesa-7.4.4/config.log" including the output > of the failure of your make command. Also, it might be a good idea to provide > an overview of all packages installed on your system (e.g. an `ls > /var/db/pkg`). > *** Error code 1 > > Stop in /usr/ports/graphics/libGL. > *** Error code 1 This is not Cacti error. The reason behind configure failure is in config.log[1] which you have yet to provide. [1] /usr/ports/graphics/libGL/work/Mesa-7.4.4/config.log From linimon at FreeBSD.org Tue Jul 21 06:28:20 2009 From: linimon at FreeBSD.org (linimon@FreeBSD.org) Date: Tue Jul 21 06:28:41 2009 Subject: FreeBSD ports that you maintain which are currently marked broken Message-ID: <20090721062819.E0D161CD5E@mail.droso.net> Dear FreeBSD port maintainer: As part of an ongoing effort to reduce the number of problems in the FreeBSD ports system, we periodically notify users of ports that are marked as "broken" in their Makefiles. In many cases these ports are failing to compile on some subset of the FreeBSD build environments. The most common problem is that recent versions of -CURRENT include gcc4.2, which is much stricter than older versions. The next most common problem is that compiles succeed on the i386 architecture (e.g. the common Intel PC), but fail on one or more of the other architectures due to assumptions about things such as size of various types, byte-alignment issues, and so forth. In occasional cases we see that the same port may have different errors in different build environments. The script that runs on the build cluster uses heuristics to try to 'guess' the error type to help you isolate problems, but it is only a rough guide. One more note: on occasion, there are transient build errors seen on the build farm. Unfortunately, there is not yet any way for this algorithm to tell the difference (humans are much, much better at this kind of thing.) The errors are listed below. In the case where the same problem exists on more than one build environment, the URL points to the latest errorlog for that type. (By 'build environment' here we mean 'combination of 6.x/7.x/-current with target architecture'.) (Note: the dates are included to help you to gauge whether or not the error still applies to the latest version. The program that generates this report is not yet able to determine this automatically.) portname: x11-drivers/xf86-video-nsc broken because: does not build build errors: none. overview: http://portsmon.FreeBSD.org/portoverview.py?category=x11-drivers&portname=xf86-video-nsc If these errors are ones that you are already aware of, please accept our apologies and ignore this message. On the other hand, if you no longer wish to maintain this port (or ports), please reply with a message stating that, and accept our thanks for your efforts in the past. Every effort has been made to make sure that these error reports really do correspond to a port that you maintain. However, due to the fact that this is an automated process, it may indeed generate false matches. If one of these errors fits that description, please forward this email to the author of this software, Mark Linimon , so that he can attempt to fix the problem in the future. Thanks for your efforts to help improve FreeBSD. From romeoparas at gmail.com Tue Jul 21 09:32:37 2009 From: romeoparas at gmail.com (Romeo Paras) Date: Tue Jul 21 09:32:43 2009 Subject: Cacti installation error In-Reply-To: <86ws62bota.fsf@gmail.com> References: <47f6550a0907202016j106f2621p17128b2a6fc42e46@mail.gmail.com> <86y6qihdme.fsf@gmail.com> <47f6550a0907202132q73577ac8wad3ce2884ed39728@mail.gmail.com> <86ws62bota.fsf@gmail.com> Message-ID: <47f6550a0907210232l764ee35ej5c2a9a61ecf5c989@mail.gmail.com> here's the error.. after reinstall CACTI, ===> Returning to build of cacti-0.8.7e ===> cacti-0.8.7e depends on shared library: mysqlclient.15 - found Added group "cacti". /: create/symlink failed, no inodes free pwd_mkdb: /etc/spwd.db.tmp: No space left on device pw: passwd file update: No such file or directory Adding user "cacti" failed... *** Error code 1 any comments or solution? thanks On Tue, Jul 21, 2009 at 1:14 PM, Anonymous wrote: > (Just because I may know smth about libGL configure failure doesn't mean > I ever used Cacti. So, don't drop x11@freebsd.org from CC.) > > Romeo Paras writes: > > > here's what I did... > > > > I went to these directories: > > > > /usr/ports/graphics/libGL. > > > > /usr/ports/graphics/libGLU. > > > > /usr/ports/graphics/glitz. > > > > /usr/ports/graphics/cairo. > > > > /usr/ports/graphics/cairo. > > > > /usr/ports/databases/rrdtool. > > > > /usr/ports/databases/rrdtool. > > > > and issue this commands; > > > > # make clean > > #make install clean > > > > if there's an error i used this command pkg_add -r > > What errors? Can you post them? > > > > > after this procedure I checked /var/db/pkg > > > > I saw on the list the libGL, libGLU, cairo, and rrdtool, > > > > does this mean evrything is ok? > > Unless Cacti doesn't work correctly then "yes". > > > so do I need to repeat the installation for cacti? > > If you encounter problems try installing all dependencies and Cacti > itself via `pkg_add -r' or via ports without intermixing both. > From gary.jennejohn at freenet.de Tue Jul 21 10:14:43 2009 From: gary.jennejohn at freenet.de (Gary Jennejohn) Date: Tue Jul 21 10:14:49 2009 Subject: Cacti installation error In-Reply-To: <47f6550a0907210232l764ee35ej5c2a9a61ecf5c989@mail.gmail.com> References: <47f6550a0907202016j106f2621p17128b2a6fc42e46@mail.gmail.com> <86y6qihdme.fsf@gmail.com> <47f6550a0907202132q73577ac8wad3ce2884ed39728@mail.gmail.com> <86ws62bota.fsf@gmail.com> <47f6550a0907210232l764ee35ej5c2a9a61ecf5c989@mail.gmail.com> Message-ID: <20090721121440.275e1aa0@ernst.jennejohn.org> On Tue, 21 Jul 2009 17:32:36 +0800 Romeo Paras wrote: > here's the error.. after reinstall CACTI, > > ===> Returning to build of cacti-0.8.7e > ===> cacti-0.8.7e depends on shared library: mysqlclient.15 - found > Added group "cacti". > > /: create/symlink failed, no inodes free > pwd_mkdb: /etc/spwd.db.tmp: No space left on device > pw: passwd file update: No such file or directory > Adding user "cacti" failed... > *** Error code 1 > > any comments or solution? thanks > Delete some junk from your root (/) file system. --- Gary Jennejohn From romeoparas at gmail.com Tue Jul 21 10:17:58 2009 From: romeoparas at gmail.com (Romeo Paras) Date: Tue Jul 21 10:18:05 2009 Subject: Cacti installation error In-Reply-To: <20090721121440.275e1aa0@ernst.jennejohn.org> References: <47f6550a0907202016j106f2621p17128b2a6fc42e46@mail.gmail.com> <86y6qihdme.fsf@gmail.com> <47f6550a0907202132q73577ac8wad3ce2884ed39728@mail.gmail.com> <86ws62bota.fsf@gmail.com> <47f6550a0907210232l764ee35ej5c2a9a61ecf5c989@mail.gmail.com> <20090721121440.275e1aa0@ernst.jennejohn.org> Message-ID: <47f6550a0907210317jcb098f2q27df31b575098df0@mail.gmail.com> after i deleted some junks in my root i tried it again and I received this errror message; Adding user "cacti" failed.. Do I need to install first apache22 and PH5 before installing cacti? thanks On Tue, Jul 21, 2009 at 6:14 PM, Gary Jennejohn wrote: > On Tue, 21 Jul 2009 17:32:36 +0800 > Romeo Paras wrote: > > > here's the error.. after reinstall CACTI, > > > > ===> Returning to build of cacti-0.8.7e > > ===> cacti-0.8.7e depends on shared library: mysqlclient.15 - found > > Added group "cacti". > > > > /: create/symlink failed, no inodes free > > pwd_mkdb: /etc/spwd.db.tmp: No space left on device > > pw: passwd file update: No such file or directory > > Adding user "cacti" failed... > > *** Error code 1 > > > > any comments or solution? thanks > > > > Delete some junk from your root (/) file system. > > --- > Gary Jennejohn > From romeoparas at gmail.com Tue Jul 21 10:44:10 2009 From: romeoparas at gmail.com (Romeo Paras) Date: Tue Jul 21 10:44:16 2009 Subject: Cacti installation error In-Reply-To: <47f6550a0907210317jcb098f2q27df31b575098df0@mail.gmail.com> References: <47f6550a0907202016j106f2621p17128b2a6fc42e46@mail.gmail.com> <86y6qihdme.fsf@gmail.com> <47f6550a0907202132q73577ac8wad3ce2884ed39728@mail.gmail.com> <86ws62bota.fsf@gmail.com> <47f6550a0907210232l764ee35ej5c2a9a61ecf5c989@mail.gmail.com> <20090721121440.275e1aa0@ernst.jennejohn.org> <47f6550a0907210317jcb098f2q27df31b575098df0@mail.gmail.com> Message-ID: <47f6550a0907210344v53714403w349e09972a15ca9c@mail.gmail.com> here's the error when I tried to install cacti again; romeo# make install clean ===> Installing for cacti-0.8.7e ===> cacti-0.8.7e depends on executable: rrdtool - found ===> cacti-0.8.7e depends on file: /usr/local/include/php/main/php.h - found ===> cacti-0.8.7e depends on file: /usr/local/lib/php/20060613/mysql.so - found ===> cacti-0.8.7e depends on file: /usr/local/lib/php/20060613/pcre.so - found ===> cacti-0.8.7e depends on file: /usr/local/lib/php/20060613/session.so - found ===> cacti-0.8.7e depends on file: /usr/local/lib/php/20060613/sockets.so - found ===> cacti-0.8.7e depends on file: /usr/local/lib/php/20060613/snmp.so - found ===> cacti-0.8.7e depends on file: /usr/local/lib/php/20060613/xml.so - found ===> cacti-0.8.7e depends on shared library: mysqlclient.15 - found cacti:*:107: You already have a group "cacti", so I will use it. pw: user 'cacti' already exists Adding user "cacti" failed... *** Error code 1 Stop in /usr/ports/net-mgmt/cacti. so, what do you think is the problem? thanks On Tue, Jul 21, 2009 at 6:17 PM, Romeo Paras wrote: > after i deleted some junks in my root i tried it again and I received this > errror message; > > Adding user "cacti" failed.. > > Do I need to install first apache22 and PH5 before installing cacti? thanks > > > On Tue, Jul 21, 2009 at 6:14 PM, Gary Jennejohn > wrote: > >> On Tue, 21 Jul 2009 17:32:36 +0800 >> Romeo Paras wrote: >> >> > here's the error.. after reinstall CACTI, >> > >> > ===> Returning to build of cacti-0.8.7e >> > ===> cacti-0.8.7e depends on shared library: mysqlclient.15 - found >> > Added group "cacti". >> > >> > /: create/symlink failed, no inodes free >> > pwd_mkdb: /etc/spwd.db.tmp: No space left on device >> > pw: passwd file update: No such file or directory >> > Adding user "cacti" failed... >> > *** Error code 1 >> > >> > any comments or solution? thanks >> > >> >> Delete some junk from your root (/) file system. >> >> --- >> Gary Jennejohn >> > > From romeoparas at gmail.com Tue Jul 21 12:14:13 2009 From: romeoparas at gmail.com (Romeo Paras) Date: Tue Jul 21 12:14:19 2009 Subject: Cacti installation error In-Reply-To: <6201873e0907210505n2fa1b91fu511ec9dfbd0d242b@mail.gmail.com> References: <47f6550a0907202016j106f2621p17128b2a6fc42e46@mail.gmail.com> <86y6qihdme.fsf@gmail.com> <47f6550a0907202132q73577ac8wad3ce2884ed39728@mail.gmail.com> <86ws62bota.fsf@gmail.com> <47f6550a0907210232l764ee35ej5c2a9a61ecf5c989@mail.gmail.com> <6201873e0907210505n2fa1b91fu511ec9dfbd0d242b@mail.gmail.com> Message-ID: <47f6550a0907210514y5d24b133pc44742c5c1ec8d05@mail.gmail.com> I already free some spaces and when I tried it again by running ' make install clean' i received these errors; cacti-0.8.7e depends on file: /usr/local/lib/php/20060613/session.so - found ===> cacti-0.8.7e depends on file: /usr/local/lib/php/20060613/sockets.so - found ===> cacti-0.8.7e depends on file: /usr/local/lib/php/20060613/snmp.so - found ===> cacti-0.8.7e depends on file: /usr/local/lib/php/20060613/xml.so - found ===> cacti-0.8.7e depends on shared library: mysqlclient.15 - found cacti:*:107: You already have a group "cacti", so I will use it. pw: user 'cacti' already exists Adding user "cacti" failed... *** Error code 1 stop at /usr/ports/net-mgmt/cacti what will I do next? thanks On Tue, Jul 21, 2009 at 8:05 PM, Adam Vande More wrote: > On Tue, Jul 21, 2009 at 4:32 AM, Romeo Paras wrote: > >> here's the error.. after reinstall CACTI, >> >> ===> Returning to build of cacti-0.8.7e >> ===> cacti-0.8.7e depends on shared library: mysqlclient.15 - found >> Added group "cacti". >> >> /: create/symlink failed, no inodes free >> pwd_mkdb: /etc/spwd.db.tmp: No space left on device >> pw: passwd file update: No such file or directory >> Adding user "cacti" failed... >> *** Error code 1 >> >> any comments or solution? thanks >> >> On Tue, Jul 21, 2009 at 1:14 PM, Anonymous wrote: >> >> > (Just because I may know smth about libGL configure failure doesn't mean >> > I ever used Cacti. So, don't drop x11@freebsd.org from CC.) >> > >> > Romeo Paras writes: >> > >> > > here's what I did... >> > > >> > > I went to these directories: >> > > >> > > /usr/ports/graphics/libGL. >> > > >> > > /usr/ports/graphics/libGLU. >> > > >> > > /usr/ports/graphics/glitz. >> > > >> > > /usr/ports/graphics/cairo. >> > > >> > > /usr/ports/graphics/cairo. >> > > >> > > /usr/ports/databases/rrdtool. >> > > >> > > /usr/ports/databases/rrdtool. >> > > >> > > and issue this commands; >> > > >> > > # make clean >> > > #make install clean >> > > >> > > if there's an error i used this command pkg_add -r >> > >> > What errors? Can you post them? >> > >> > > >> > > after this procedure I checked /var/db/pkg >> > > >> > > I saw on the list the libGL, libGLU, cairo, and rrdtool, >> > > >> > > does this mean evrything is ok? >> > >> > Unless Cacti doesn't work correctly then "yes". >> > >> > > so do I need to repeat the installation for cacti? >> > >> > If you encounter problems try installing all dependencies and Cacti >> > itself via `pkg_add -r' or via ports without intermixing both. >> > >> > > Clean out your root partition. > > > -- > Adam Vande More > From swell.k at gmail.com Wed Jul 22 05:30:10 2009 From: swell.k at gmail.com (Anonymous) Date: Wed Jul 22 05:30:16 2009 Subject: ports/136806: [patch] graphics/libdrm: update to 2.4.12; Message-ID: <200907220530.n6M5U9br013192@freefall.freebsd.org> The following reply was made to PR ports/136806; it has been noted by GNATS. From: Anonymous To: bug-followup@FreeBSD.org Cc: Subject: Re: ports/136806: [patch] graphics/libdrm: update to 2.4.12; Date: Wed, 22 Jul 2009 09:21:07 +0400 I'll abuse this PR one more time. Here is an updated nouveau patch: - new snapshot 20090721.f70287c tested on Xserver 1.6.1 with drm-nouveau-062309.patch - move SNAPDATE and SNAPREV to ${MASTERDIR}/Makefile.rev Now, to get fresh snapshot one needs to run $ make maint-gen-distfile && make makesum without touching Makefile. And to get diff for it like I do $ ( cd ../..; cvs diff -upN x11-drivers/xf86-video-nouveau ) Note: with advent of AM_SILENT_RULES in f70287c revision you need automake-1.11 to be able to generate distfile. You can use my diff for now[1]. [1] ftp://ftp.lissyara.su/users/Guest/automake111.diff --- xf86-video-nouveau.diff begins here --- Index: x11-drivers/xf86-video-nouveau/Makefile =================================================================== RCS file: /home/csup/ports/x11-drivers/xf86-video-nouveau/Makefile,v retrieving revision 1.6 diff -u -p -r1.6 Makefile --- x11-drivers/xf86-video-nouveau/Makefile 16 May 2009 14:01:34 -0000 1.6 +++ x11-drivers/xf86-video-nouveau/Makefile 22 Jul 2009 04:02:01 -0000 @@ -20,15 +20,18 @@ MAN4= nouveau.4x MAKE_JOBS_SAFE= yes -SNAPDATE= 20090514 -SNAPREV= 9656762 - post-configure: ${REINPLACE_CMD} '/NV_DRIVER_DATE/s/".*"/"${SNAPDATE}.${SNAPREV}"/' ${WRKSRC}/config.h +post-install: .SILENT + ${ECHO_MSG} + ${CAT} ${PKGMESSAGE} + ${ECHO_MSG} + GIT_WORK= ${WRKDIR}/${PORTNAME}.git-clone -GIT_REV= $$(date -ur$$(git log --pretty=format:%ct -1 \ - ) +%Y%m%d).$$(git log --pretty=format:%h -1) +GIT_DATE= $$(date -ur$$(git log --pretty=format:%ct -1 ) +%Y%m%d) +GIT_REV= $$(git log --pretty=format:%h -1) +NEWDISTNAME= ${DISTNAME:S/${SNAPDATE}.${SNAPREV}$$//}${GIT_DATE}.${GIT_REV} maint-gen-distfile: git clone git://anongit.freedesktop.org/nouveau/xf86-video-nouveau \ @@ -37,11 +40,17 @@ maint-gen-distfile: ( cd ${GIT_WORK}; \ git log --stat >ChangeLog; \ autoreconf -if; \ - ${TAR} cjf ${DISTDIR}/${DIST_SUBDIR}/${DISTNAME:S/${SNAPDATE}.${SNAPREV}$$//}${GIT_REV}.tar.bz2 \ - --exclude '.git*' --exclude autogen.sh --exclude autom4te.cache \ - -s "|${GIT_WORK}|${DISTNAME:S/${SNAPDATE}.${SNAPREV}$$//}${GIT_REV}|" \ - ${GIT_WORK} ) + ${TAR} cjf ${DISTDIR}/${DIST_SUBDIR}/${NEWDISTNAME}${EXTRACT_SUFX} \ + --exclude '.git*' --exclude autogen.sh \ + --exclude autom4te.cache \ + -s "|${GIT_WORK}|${NEWDISTNAME}|" \ + ${GIT_WORK}; \ + ${ECHO_CMD} "SNAPDATE= ${GIT_DATE}" \ + >${MASTERDIR}/Makefile.rev; \ + ${ECHO_CMD} "SNAPREV= ${GIT_REV}" \ + >>${MASTERDIR}/Makefile.rev ) ${RM} -rf ${GIT_WORK} +.include "Makefile.rev" .include Index: x11-drivers/xf86-video-nouveau/Makefile.rev =================================================================== RCS file: x11-drivers/xf86-video-nouveau/Makefile.rev diff -N x11-drivers/xf86-video-nouveau/Makefile.rev --- /dev/null 1 Jan 1970 00:00:00 -0000 +++ x11-drivers/xf86-video-nouveau/Makefile.rev 22 Jul 2009 04:03:29 -0000 @@ -0,0 +1,2 @@ +SNAPDATE= 20090721 +SNAPREV= f70287c Index: x11-drivers/xf86-video-nouveau/distinfo =================================================================== RCS file: /home/csup/ports/x11-drivers/xf86-video-nouveau/distinfo,v retrieving revision 1.3 diff -u -p -r1.3 distinfo --- x11-drivers/xf86-video-nouveau/distinfo 16 May 2009 14:01:34 -0000 1.3 +++ x11-drivers/xf86-video-nouveau/distinfo 22 Jul 2009 04:04:26 -0000 @@ -1,3 +1,3 @@ -MD5 (xorg/driver/xf86-video-nouveau-0.0.10.20090514.9656762.tar.bz2) = 86aff4923c1b2143aae0f7f2ac65b5a3 -SHA256 (xorg/driver/xf86-video-nouveau-0.0.10.20090514.9656762.tar.bz2) = eaa2f230770338c08839d0c6f7211ef9624a19eb305689f3f012df3ab92cb5c7 -SIZE (xorg/driver/xf86-video-nouveau-0.0.10.20090514.9656762.tar.bz2) = 556039 +MD5 (xorg/driver/xf86-video-nouveau-0.0.10.20090721.f70287c.tar.bz2) = b0782867e4e8783dde1a069a53161eed +SHA256 (xorg/driver/xf86-video-nouveau-0.0.10.20090721.f70287c.tar.bz2) = a783f1d4699d338245cfbf0194073ec1e68ec642a802a3b6396cafd5ebd8cbff +SIZE (xorg/driver/xf86-video-nouveau-0.0.10.20090721.f70287c.tar.bz2) = 552613 Index: x11-drivers/xf86-video-nouveau/pkg-message =================================================================== RCS file: x11-drivers/xf86-video-nouveau/pkg-message diff -N x11-drivers/xf86-video-nouveau/pkg-message --- /dev/null 1 Jan 1970 00:00:00 -0000 +++ x11-drivers/xf86-video-nouveau/pkg-message 15 Jul 2009 22:19:29 -0000 @@ -0,0 +1,15 @@ +The DRM part is still not in the kernel tree and will not be there +until it stabilized. It won't happen anytime soon. So, consider using +the following patch in the meantime unless you don't want any hardware +accelerated 2D like EXA and Xvideo. + +http://people.freebsd.org/~rnoland/drm-nouveau-062309.patch + +Installing it should be as simple as below procedure provided you have +base sources in /usr/src. + + # cd /usr/src/sys + # fetch http://people.freebsd.org/~rnoland/drm-nouveau-062309.patch + # patch -sp0 -i drm-nouveau-062309.patch + # cd modules/drm + # make depend all install --- xf86-video-nouveau.diff ends here --- From alvest at brakiri.com Thu Jul 23 22:38:18 2009 From: alvest at brakiri.com (Albert Vest) Date: Thu Jul 23 22:38:25 2009 Subject: Cacti installation error In-Reply-To: <47f6550a0907210514y5d24b133pc44742c5c1ec8d05@mail.gmail.com> References: <47f6550a0907202016j106f2621p17128b2a6fc42e46@mail.gmail.com> <86y6qihdme.fsf@gmail.com> <47f6550a0907202132q73577ac8wad3ce2884ed39728@mail.gmail.com> <86ws62bota.fsf@gmail.com> <47f6550a0907210232l764ee35ej5c2a9a61ecf5c989@mail.gmail.com> <6201873e0907210505n2fa1b91fu511ec9dfbd0d242b@mail.gmail.com> <47f6550a0907210514y5d24b133pc44742c5c1ec8d05@mail.gmail.com> Message-ID: <4A68E018.7030607@brakiri.com> Romeo Paras wrote: > I already free some spaces and when I tried it again by running ' make > install clean' i received these errors; > pw: user 'cacti' already exists > Adding user "cacti" failed... > *** Error code 1 > > stop at /usr/ports/net-mgmt/cacti > > what will I do next? If it were my machine, I'd conclude that adding user "cacti" failed because it's already there, and stupid script can't add what's already there so it throws an error... So I would try "make -i install" next, and see what happens. The -i means "ignore errors" - you might try "man make" too while you're at it. Good luck, -- Albert Vest, Al Vest at Brakiri dot com From peterjeremy at optushome.com.au Sun Jul 26 12:50:04 2009 From: peterjeremy at optushome.com.au (Peter Jeremy) Date: Sun Jul 26 12:50:11 2009 Subject: ports/131930: [PATCH] x11-servers/xorg-server coredumps on exit Message-ID: <200907261250.n6QCo3jR052934@freefall.freebsd.org> The following reply was made to PR ports/131930; it has been noted by GNATS. From: Peter Jeremy To: FreeBSD-gnats-submit@freebsd.org, freebsd-ports-bugs@freebsd.org Cc: Subject: Re: ports/131930: [PATCH] x11-servers/xorg-server coredumps on exit Date: Sun, 26 Jul 2009 20:42:21 +1000 --GvXjxJ+pjyke8COw Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On 2009-May-18 21:26:43 +1000, Peter Jeremy = wrote: >I am no longer able to reproduce the core-dump on a stock >xorg-server-1.6.1,1 so I believe the problem has been resolved >upstream (though in a different fashion to my patch). Looks like I spoke too soon. After my latest upgrade on an 8-current netbook (i386 with i915), the core-dump-on-exit problem re-appeared until I re-applied an updated version of the patch (see end). (This is a regression as it was working OK until my latest port upgrade). X-related ports list: damageproto-1.1.0_2 dri-7.4.4,2 dri2proto-2.0 expat-2.0.1 fixesproto-4.0 fontsproto-2.0.2 freetype2-2.3.9_1 gettext-0.17_1 inputproto-1.5.0 kbproto-1.0.3 libGL-7.4.4 libICE-1.0.4_1,1 libSM-1.1.0_1,1 libX11-1.2.1_1,1 libXau-1.0.4 libXaw-1.0.5_1,1 libXdamage-1.1.1 libXdmcp-1.0.2_1 libXext-1.0.5,1 libXfixes-4.0.3_1 libXfont-1.3.4,1 libXi-1.2.1,1 libXinerama-1.0.3,1 libXmu-1.0.4,1 libXp-1.0.0,1 libXpm-3.5.7 libXt-1.0.5_1 libXv-1.0.4,1 libXvMC-1.0.4_1 libXxf86misc-1.0.1 libXxf86vm-1.0.2 libdrm-2.4.11 libfontenc-1.0.4 libiconv-1.13.1 libpciaccess-0.10.6 libpthread-stubs-0.1 libxcb-1.3 libxkbfile-1.0.5 libxkbui-1.0.2_1 pciids-20090224 pixman-0.15.4 pkg-config-0.23_1 printproto-1.0.4 python25-2.5.4_2 videoproto-2.2.2 xcb-proto-1.5 xextproto-7.0.5 xf86miscproto-0.9.2 xf86vidmodeproto-2.2.2 xineramaproto-1.1.2 xkeyboard-config-1.6_1 xorg-server-1.6.1_1,1 xproto-7.0.15 Unfortunately, the original patch no longer applies. A revised patch is: --- dix/window.c~ 2009-04-15 03:14:56.000000000 +1000 +++ dix/window.c 2009-07-26 20:13:11.257430828 +1000 @@ -963,7 +963,11 @@ } xfree(dixLookupPrivate(&pWin->devPrivates, FocusPrivatesKey)); dixFreePrivates(pWin->devPrivates); - xfree(pWin); + if (!pParent) { + pWin->devPrivates =3D NULL; + } else { + xfree(pWin); + } return Success; } =20 --=20 Peter Jeremy --GvXjxJ+pjyke8COw Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.12 (FreeBSD) iEYEARECAAYFAkpsMw0ACgkQ/opHv/APuIf49gCdF9UYuybIZuyx/Pi4waP9sKpE TKsAoJR540E9HPWylTNCn+mfOrJjYX/6 =wkAW -----END PGP SIGNATURE----- --GvXjxJ+pjyke8COw-- From bugmaster at FreeBSD.org Mon Jul 27 11:07:06 2009 From: bugmaster at FreeBSD.org (FreeBSD bugmaster) Date: Mon Jul 27 11:10:14 2009 Subject: Current problem reports assigned to freebsd-x11@FreeBSD.org Message-ID: <200907271107.n6RB750j019156@freefall.freebsd.org> Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description -------------------------------------------------------------------------------- o ports/136806 x11 [patch] graphics/libdrm: update to 2.4.12; o ports/135276 x11 x11/xorg: GUI running first time only while using Free o ports/134643 x11 [patch] x11-servers/xorg-server - Unbreak Xorg 7.4 ser o ports/134244 x11 x11/xorg: "intel" driver for Xorg is very broken o ports/134194 x11 graphics/dri fail on 7.2-RELEASE amd64 o ports/134132 x11 x11-servers/xorg-server: Intel i845 - xorg.conf with U o ports/134082 x11 x11/xdriinfo: xdriinfo-1.0.2 build fail o ports/133946 x11 x11-servers/xorg-server [patch] X crashes in xinerama o ports/133609 x11 x11/xorg crashes with vlc, intel video driver o ports/133482 x11 x11/libXext "Generic Event Extension not available" er o ports/133465 x11 x11/xorg: X crashes with mplayer -vo xv with xf86-vide o ports/133419 x11 Unable to build x11-drivers/xf86-video-nsc o ports/133175 x11 [patch] x11/pixman: enable SSE2 support autodetection o ports/132621 x11 x11/xorg tries to install event when deselected o ports/132403 x11 x11/xorg with Radeon X600 (R370): cannot re-initialize o ports/132100 x11 x11/xorg: Xorg server forgets pointer map after xlock o ports/132041 x11 x11/xorg: Broken Intel video driver o ports/131930 x11 [PATCH] x11-servers/xorg-server coredumps on exit o ports/131726 x11 x11-servers/xorg-server: xorg server messes with my eh o ports/131696 x11 x11-servers/xorg-server: hald core dumps make X11 unus o ports/131016 x11 x11/xorg - xorg-7.4 renders system unusable! s kern/130478 x11 [request] Port Linux kernel stub of nouveau to FreeBSD f ports/126812 x11 x11-drivers/xf86-video-ati - System freeze when exitin o ports/125883 x11 x11-fonts/xorg-fonts-cyrillic is installed, but fonts f ports/123137 x11 x11/libX11: missing ru_RU.UTF-8 locale o ports/122830 x11 x11/xorg: Error in I830WaitLpRing() s ports/117907 x11 x11-servers/mga_hal broken on 7.0-BETA (GLIBC error) o ports/116443 x11 x11-drivers/xf86-input-keyboard patch for USB jp106 ke 28 problems total. From creedis at gmail.com Wed Jul 29 03:00:19 2009 From: creedis at gmail.com (Chris Reed) Date: Wed Jul 29 03:00:24 2009 Subject: (no subject) Message-ID: <23b578100907281935l41c92a4cva36f63f038a25207@mail.gmail.com> checking for XI... configure: error: Package requirements (xproto x11 xextproto xext inputproto >= 1.5) were not met: Requested 'inputproto >= 1.5' but version of InputProto is 1.4.2.1 Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables XI_CFLAGS and XI_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. ===> Script "configure" failed unexpectedly. Please report the problem to x11@FreeBSD.org [maintainer] and attach the "/usr/ports/x11/libXi/work/libXi-1.2.1/config.log" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. an `ls /var/db/pkg`). *** Error code 1 Stop in /usr/ports/x11/libXi. *** Error code 1 Stop in /usr/ports/java/diablo-jdk15. *** Error code 1 Stop in /usr/ports/java/diablo-jdk15. 140 11:25pm /usr/ports/java/diablo-jdk15 -> cp /usr/ports/x11/libXi/work/libXi-1.2.1/config.log /usr/local/www/apache22/data/ -------------- next part -------------- A non-text attachment was scrubbed... Name: config.log Type: application/octet-stream Size: 26444 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090729/e93f3138/config.obj From swell.k at gmail.com Wed Jul 29 06:29:06 2009 From: swell.k at gmail.com (Anonymous) Date: Wed Jul 29 06:29:13 2009 Subject: (no subject) In-Reply-To: <23b578100907281935l41c92a4cva36f63f038a25207@mail.gmail.com> (Chris Reed's message of "Tue, 28 Jul 2009 23:35:50 -0300") References: <23b578100907281935l41c92a4cva36f63f038a25207@mail.gmail.com> Message-ID: <86d47k9f4g.fsf@gmail.com> Chris Reed writes: > checking for XI... configure: error: Package requirements (xproto x11 > xextproto xext inputproto >= 1.5) were not met: > > Requested 'inputproto >= 1.5' but version of InputProto is 1.4.2.1 [...] What's stopping you from updating x11/inputproto ? From swell.k at gmail.com Wed Jul 29 12:41:57 2009 From: swell.k at gmail.com (Anonymous) Date: Wed Jul 29 12:42:03 2009 Subject: (no subject) In-Reply-To: <23b578100907290417g7f70143fwdc35e5601e492721@mail.gmail.com> (Chris Reed's message of "Wed, 29 Jul 2009 08:17:09 -0300") References: <23b578100907281935l41c92a4cva36f63f038a25207@mail.gmail.com> <86d47k9f4g.fsf@gmail.com> <23b578100907290417g7f70143fwdc35e5601e492721@mail.gmail.com> Message-ID: <86zlan7k9g.fsf@gmail.com> Chris Reed writes: > 2009/7/29 Anonymous > > > > Chris Reed writes: > > > > > checking for XI... configure: error: Package requirements (xproto x11 > > > xextproto xext inputproto >= 1.5) were not met: > > > > > > Requested 'inputproto >= 1.5' but version of InputProto is 1.4.2.1 > > [...] > > > > What's stopping you from updating x11/inputproto ? > > not a thing. has been updated to 1.5. Is configure error solved now? > > This box doesnt' use any windows?environment, which I am assuming is what > the libXi is tied in to? x11/libXi is being pulled by java/diablo-jdk15. It says so *explicitly* in the port Makefile USE_XORG+= xi From jason.williams14 at gmail.com Thu Jul 30 15:37:45 2009 From: jason.williams14 at gmail.com (Jason Williams) Date: Thu Jul 30 15:37:52 2009 Subject: xorg failed port installed In-Reply-To: <99affef70907300818m5d88f322ocdcd3d6ecfd277e4@mail.gmail.com> References: <99affef70907300818m5d88f322ocdcd3d6ecfd277e4@mail.gmail.com> Message-ID: <99affef70907300837n3e40f841teca52972c7b923bc@mail.gmail.com> sorry...meant to add more info: ===> Script "configure" failed unexpectedly. Please report the problem to x11@FreeBSD.org [maintainer] and attach the "/usr/ports/x11-fonts/mkfontscale/work/mkfontscale-1.0.6/config.log" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. an `ls /var/db/pkg`). *** Error code 1 Stop in /usr/ports/x11-fonts/mkfontscale. *** Error code 1 Stop in /usr/ports/x11-fonts/mkfontscale. *** Error code 1 Stop in /usr/ports/x11-fonts/mkfontdir. *** Error code 1 Stop in /usr/ports/x11-fonts/mkfontdir. *** Error code 1 Stop in /usr/ports/x11/xorg-apps. *** Error code 1 Stop in /usr/ports/x11/xorg-apps. *** Error code 1 Stop in /usr/ports/x11/xorg-apps. *** Error code 1 Stop in /usr/ports/x11/xorg. *** Error code 1 Stop in /usr/ports/x11/xorg. williams_free# ls -la /var/db/pkg total 144 drwxr-xr-x 72 root wheel 2048 Jul 30 08:08 . drwxr-xr-x 9 root wheel 512 Jul 29 14:29 .. drwxr-xr-x 2 root wheel 512 Jul 30 07:59 appres-1.0.1 drwxr-xr-x 2 root wheel 512 Jul 30 07:22 autoconf-2.62 drwxr-xr-x 2 root wheel 512 Jul 30 07:21 autoconf-wrapper-20071109 drwxr-xr-x 2 root wheel 512 Jul 30 07:22 automake-1.10.1 drwxr-xr-x 2 root wheel 512 Jul 30 07:22 automake-wrapper-20071109 drwxr-xr-x 2 root wheel 512 Jul 29 15:20 bigreqsproto-1.0.2 drwxr-xr-x 2 root wheel 512 Jul 30 08:06 bitmap-1.0.3_1 drwxr-xr-x 2 root wheel 512 Jul 29 14:26 cvsup-without-gui-16.1h_4 drwxr-xr-x 2 root wheel 512 Jul 30 07:32 damageproto-1.1.0_2 drwxr-xr-x 2 root wheel 512 Jul 30 07:39 dri-7.4.4,2 drwxr-xr-x 2 root wheel 512 Jul 29 15:04 dri2proto-2.0 drwxr-xr-x 2 root wheel 512 Jul 30 07:39 expat-2.0.1 drwxr-xr-x 2 root wheel 512 Jul 30 07:32 fixesproto-4.0 drwxr-xr-x 2 root wheel 512 Jul 29 15:02 gettext-0.17_1 drwxr-xr-x 2 root wheel 512 Jul 29 15:04 glproto-1.4.10 drwxr-xr-x 2 root wheel 512 Jul 29 15:02 gmake-3.81_3 drwxr-xr-x 2 root wheel 512 Jul 30 07:21 help2man-1.36.4_3 drwxr-xr-x 2 root wheel 512 Jul 30 08:07 iceauth-1.0.2 drwxr-xr-x 2 root wheel 512 Jul 29 15:21 inputproto-1.5.0 drwxr-xr-x 2 root wheel 512 Jul 30 07:29 kbproto-1.0.3 drwxr-xr-x 2 root wheel 512 Jul 30 07:58 libICE-1.0.4_1,1 drwxr-xr-x 2 root wheel 512 Jul 30 07:59 libSM-1.1.0_1,1 drwxr-xr-x 2 root wheel 512 Jul 30 07:29 libX11-1.2.1_1,1 drwxr-xr-x 2 root wheel 512 Jul 29 15:19 libXau-1.0.4 drwxr-xr-x 2 root wheel 512 Jul 30 08:06 libXaw-1.0.5_1,1 drwxr-xr-x 2 root wheel 512 Jul 30 07:45 libXcursor-1.1.9_1 drwxr-xr-x 2 root wheel 512 Jul 30 07:39 libXdamage-1.1.1 drwxr-xr-x 2 root wheel 512 Jul 29 15:19 libXdmcp-1.0.2_1 drwxr-xr-x 2 root wheel 512 Jul 30 07:30 libXext-1.0.5,1 drwxr-xr-x 2 root wheel 512 Jul 30 07:32 libXfixes-4.0.3_1 drwxr-xr-x 2 root wheel 512 Jul 30 08:06 libXmu-1.0.4,1 drwxr-xr-x 2 root wheel 512 Jul 30 08:06 libXp-1.0.0,1 drwxr-xr-x 2 root wheel 512 Jul 30 08:06 libXpm-3.5.7 drwxr-xr-x 2 root wheel 512 Jul 30 07:44 libXrender-0.9.4_1 drwxr-xr-x 2 root wheel 512 Jul 30 07:59 libXt-1.0.5_1 drwxr-xr-x 2 root wheel 512 Jul 30 08:07 libXxf86dga-1.0.2 drwxr-xr-x 2 root wheel 512 Jul 30 07:39 libXxf86vm-1.0.2 drwxr-xr-x 2 root wheel 512 Jul 29 15:07 libcheck-0.9.6 drwxr-xr-x 2 root wheel 512 Jul 30 07:39 libdrm-2.4.11 drwxr-xr-x 2 root wheel 512 Jul 30 08:08 libfontenc-1.0.4 drwxr-xr-x 2 root wheel 512 Jul 29 15:02 libiconv-1.13.1 drwxr-xr-x 2 root wheel 512 Jul 29 15:19 libpthread-stubs-0.1 drwxr-xr-x 2 root wheel 512 Jul 29 14:52 libtool-1.5.26 drwxr-xr-x 2 root wheel 512 Jul 30 07:29 libxcb-1.3 drwxr-xr-x 2 root wheel 512 Jul 29 15:12 libxml2-2.7.3 drwxr-xr-x 2 root wheel 512 Jul 29 15:12 libxslt-1.1.24_2 drwxr-xr-x 2 root wheel 512 Jul 30 08:08 luit-1.0.3_1 drwxr-xr-x 2 root wheel 512 Jul 30 07:21 m4-1.4.13,1 drwxr-xr-x 2 root wheel 512 Jul 29 15:03 makedepend-1.0.1,1 drwxr-xr-x 2 root wheel 512 Jul 30 07:21 p5-gettext-1.05_2 drwxr-xr-x 2 root wheel 512 Jul 30 07:21 perl-5.10.0_4 drwxr-xr-x 2 root wheel 512 Jul 29 15:03 pkg-config-0.23_1 drwxr-xr-x 2 root wheel 512 Jul 30 07:45 png-1.2.37 drwxr-xr-x 2 root wheel 512 Jul 30 08:03 printproto-1.0.4 drwxr-xr-x 2 root wheel 512 Jul 29 15:17 python26-2.6.2_1 drwxr-xr-x 2 root wheel 512 Jul 30 07:44 renderproto-0.9.3 drwxr-xr-x 2 root wheel 512 Jul 30 08:06 xbitmaps-1.0.1 drwxr-xr-x 2 root wheel 512 Jul 29 15:19 xcb-proto-1.5 drwxr-xr-x 2 root wheel 512 Jul 29 15:20 xcmiscproto-1.1.2 drwxr-xr-x 2 root wheel 512 Jul 30 07:45 xcursor-themes-1.0.1_1 drwxr-xr-x 2 root wheel 512 Jul 30 07:45 xcursorgen-1.0.2 drwxr-xr-x 2 root wheel 512 Jul 30 07:29 xextproto-7.0.5 drwxr-xr-x 2 root wheel 512 Jul 29 15:21 xf86bigfontproto-1.1.2 drwxr-xr-x 2 root wheel 512 Jul 30 08:07 xf86dga-1.0.2_1 drwxr-xr-x 2 root wheel 512 Jul 30 08:07 xf86dgaproto-2.0.3 drwxr-xr-x 2 root wheel 512 Jul 30 07:30 xf86vidmodeproto-2.2.2 drwxr-xr-x 2 root wheel 512 Jul 30 07:55 xorg-docs-1.4,1 drwxr-xr-x 2 root wheel 512 Jul 29 15:20 xorg-macros-1.2.1 drwxr-xr-x 2 root wheel 512 Jul 29 15:03 xproto-7.0.15 drwxr-xr-x 2 root wheel 512 Jul 29 15:21 xtrans-1.2.3 On Thu, Jul 30, 2009 at 8:18 AM, Jason Williams wrote: > Attached is the requested log. > > Thanks, > > Jason > From jason.williams14 at gmail.com Thu Jul 30 15:51:12 2009 From: jason.williams14 at gmail.com (Jason Williams) Date: Thu Jul 30 15:51:18 2009 Subject: xorg failed port installed Message-ID: <99affef70907300818m5d88f322ocdcd3d6ecfd277e4@mail.gmail.com> Attached is the requested log. Thanks, Jason -------------- next part -------------- A non-text attachment was scrubbed... Name: config.log Type: application/octet-stream Size: 14503 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-x11/attachments/20090730/13ab8e7b/config.obj From swell.k at gmail.com Thu Jul 30 16:24:11 2009 From: swell.k at gmail.com (Anonymous) Date: Thu Jul 30 16:24:18 2009 Subject: xorg failed port installed In-Reply-To: <99affef70907300818m5d88f322ocdcd3d6ecfd277e4@mail.gmail.com> (Jason Williams's message of "Thu, 30 Jul 2009 08:18:46 -0700") References: <99affef70907300818m5d88f322ocdcd3d6ecfd277e4@mail.gmail.com> Message-ID: <864osum95k.fsf@gmail.com> Jason Williams writes: > configure:4500: $PKG_CONFIG --exists --print-errors "fontenc freetype2" > gnome-config: not found > Package freetype2 was not found in the pkg-config search path. > Perhaps you should add the directory containing `freetype2.pc' > to the PKG_CONFIG_PATH environment variable > No package 'freetype2' found print/freetype2 is a dependency of x11-fonts/mkfontscale. How did you end up without it? Install it and try again. From dsh at wizard.volgograd.ru Fri Jul 31 16:05:42 2009 From: dsh at wizard.volgograd.ru (Denis Shaposhnikov) Date: Fri Jul 31 16:05:49 2009 Subject: xorg freeze on STABLE Message-ID: <20090731194005.0b2a94b1@wizard.volgograd.ru> Hello, I'm using Intel G45 and Compiz Fusion. Before today's FreeBSD update I had xorg freeze sometimes. With fresh STABLE xorg on my notebook freezes every time I'm trying to resize any window. Could somebody tell me how to debug this situation? Thanks! From rnoland at FreeBSD.org Fri Jul 31 16:23:03 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Fri Jul 31 16:23:09 2009 Subject: xorg freeze on STABLE In-Reply-To: <20090731194005.0b2a94b1@wizard.volgograd.ru> References: <20090731194005.0b2a94b1@wizard.volgograd.ru> Message-ID: <1249057373.1740.16.camel@balrog.2hip.net> On Fri, 2009-07-31 at 19:40 +0400, Denis Shaposhnikov wrote: > Hello, > > I'm using Intel G45 and Compiz Fusion. Before today's FreeBSD update I > had xorg freeze sometimes. With fresh STABLE xorg on my notebook > freezes every time I'm trying to resize any window. Could somebody tell > me how to debug this situation? Hrm, the drm code that is in -STABLE now is identical to what is in -CURRENT. My usual environment is gnome + compiz and my Intel test box is a G45. It looks like my installed Mesa is current from ports right now (7.4.4). Intel driver also seems to be current port (2.7.1). And finally libdrm seems to be 2.4.11, which is also current port, so I'm not running any git bits on this box right now. I don't see any issues with resizing windows though... Possibly something in your xorg.conf or compiz plugin configuration is causing issues... Is this i386 or amd64? Is it only X that locks up, or does the whole machine lockup(can you ssh to the box)? robert. > Thanks! > > > _______________________________________________ > freebsd-x11@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-x11 > To unsubscribe, send any mail to "freebsd-x11-unsubscribe@freebsd.org" -- Robert Noland FreeBSD From dsh at wizard.volgograd.ru Fri Jul 31 17:01:03 2009 From: dsh at wizard.volgograd.ru (Denis Shaposhnikov) Date: Fri Jul 31 17:01:09 2009 Subject: xorg freeze on STABLE In-Reply-To: <1249057373.1740.16.camel@balrog.2hip.net> References: <20090731194005.0b2a94b1@wizard.volgograd.ru> <1249057373.1740.16.camel@balrog.2hip.net> Message-ID: <20090731204134.3387dfb7@wizard.volgograd.ru> Hello, On Fri, 31 Jul 2009 11:22:53 -0500 Robert Noland wrote: > Hrm, the drm code that is in -STABLE now is identical to what is in > -CURRENT. My usual environment is gnome + compiz and my Intel test I use compiz only. > box is a G45. It looks like my installed Mesa is current from ports > right now (7.4.4). Intel driver also seems to be current port > (2.7.1). And finally libdrm seems to be 2.4.11, which is also Same versions for me. > I don't see any issues with resizing windows though... Possibly > something in your xorg.conf or compiz plugin configuration is causing > issues... I don't know. Often this happens when I try to resize xterm window with rtorrent inside. > Is this i386 or amd64? i386 > Is it only X that locks up, or does the whole machine lockup(can you > ssh to the box)? I can't ssh into it. But my power button works and the system shutdowns fine. From rnoland at FreeBSD.org Fri Jul 31 17:52:32 2009 From: rnoland at FreeBSD.org (Robert Noland) Date: Fri Jul 31 17:52:37 2009 Subject: xorg freeze on STABLE In-Reply-To: <20090731204134.3387dfb7@wizard.volgograd.ru> References: <20090731194005.0b2a94b1@wizard.volgograd.ru> <1249057373.1740.16.camel@balrog.2hip.net> <20090731204134.3387dfb7@wizard.volgograd.ru> Message-ID: <1249062743.1740.23.camel@balrog.2hip.net> On Fri, 2009-07-31 at 20:41 +0400, Denis Shaposhnikov wrote: > Hello, > > On Fri, 31 Jul 2009 11:22:53 -0500 > Robert Noland wrote: > > > Hrm, the drm code that is in -STABLE now is identical to what is in > > -CURRENT. My usual environment is gnome + compiz and my Intel test > > I use compiz only. > > > box is a G45. It looks like my installed Mesa is current from ports > > right now (7.4.4). Intel driver also seems to be current port > > (2.7.1). And finally libdrm seems to be 2.4.11, which is also > > Same versions for me. > > > I don't see any issues with resizing windows though... Possibly > > something in your xorg.conf or compiz plugin configuration is causing > > issues... > > I don't know. Often this happens when I try to resize xterm window with > rtorrent inside. > > > Is this i386 or amd64? > > i386 > > > Is it only X that locks up, or does the whole machine lockup(can you > > ssh to the box)? > > I can't ssh into it. But my power button works and the system shutdowns > fine. Ok, my fear is that this is an interaction issue between the tty layer and X. I remember seeing an issue like this several months ago (6+), but I haven't seen it in a long time on -CURRENT. robert. -- Robert Noland FreeBSD From dsh at wizard.volgograd.ru Fri Jul 31 18:07:28 2009 From: dsh at wizard.volgograd.ru (Denis Shaposhnikov) Date: Fri Jul 31 18:07:34 2009 Subject: xorg freeze on STABLE In-Reply-To: <1249062743.1740.23.camel@balrog.2hip.net> References: <20090731194005.0b2a94b1@wizard.volgograd.ru> <1249057373.1740.16.camel@balrog.2hip.net> <20090731204134.3387dfb7@wizard.volgograd.ru> <1249062743.1740.23.camel@balrog.2hip.net> Message-ID: <20090731220720.04dc7eae@wizard.volgograd.ru> Hello, On Fri, 31 Jul 2009 12:52:23 -0500 Robert Noland wrote: > Ok, my fear is that this is an interaction issue between the tty layer > and X. I remember seeing an issue like this several months ago (6+), > but I haven't seen it in a long time on -CURRENT. I've changed compiz window resize mode to "Rectange" instead of "Normal". May be it'll help me. Last time Xorg frozen when I tried to resize Gajim window. From galbrig at googlemail.com Fri Jul 31 20:59:15 2009 From: galbrig at googlemail.com (albri) Date: Fri Jul 31 20:59:22 2009 Subject: 8.0 beta2 (patched) - drm_bufs.c: system freeze Message-ID: <4a73541c.0c0db80a.214d.ffff9b89@mx.google.com> hello list, here is an information what does not function on one system: a patched drm with rnoland's patch drm-nouveau-043009.patch and a daily fresh xf86-video-nouveau causes system to freeze. there was written no coredump and no Xorg.o.log, just a freeze. the only info gotten is written to log/messages. kernel is GENERIC with amd64. graphic card is IGP. just for your information in wish it is helpful. best regards kern.ostype: FreeBSD kern.osrelease: 8.0-BETA2 kern.osrevision: 199506 kern.osreldate: 800106 # cat messages | grep -ie "nouve\|drm" Jul 30 02:27:07 xxx kernel: drm0: on vgapci0 Jul 30 02:27:07 xxx kernel: info: [drm] MSI enabled 1 message(s) Jul 30 02:27:07 xxx kernel: info: [drm] Detected an NV44 generation card (0x04e000a2) Jul 30 02:27:07 xxx kernel: vgapci0: child drm0 requested pci_enable_busmaster Jul 30 02:27:07 xxx kernel: info: [drm] Initialized nouveau 0.0.12 20060213 Jul 30 02:27:48 xxx kernel: error: [drm:pid1979:drm_alloc_resource] *ERROR* Couldn't find resource 0x2 Jul 30 02:29:19 xxx kernel: exclusive sleep mutex drmdev (drmdev) r = 0 (0xffffff00112a20a0) locked @ /usr/src/sys/modules/drm/drm/../../../dev/drm/drm_bufs.c:55 Jul 30 02:29:19 xxx kernel: drm_sg_alloc() at drm_sg_alloc+0x4b Jul 30 02:29:19 xxx kernel: nouveau_mem_init() at nouveau_mem_init+0x4f3 Jul 30 02:29:19 xxx kernel: nouveau_card_init() at nouveau_card_init+0x7c5 Jul 30 02:29:19 xxx kernel: nouveau_ioctl_card_init() at nouveau_ioctl_card_init+0x9 Jul 30 02:29:19 xxx kernel: drm_ioctl() at drm_ioctl+0x314 Jul 30 02:29:19 xxx kernel: panic: _mtx_lock_sleep: recursed on non-recursive mutex drmdev @ /usr/src/sys/modules/drm/drm/../../../dev/drm/drm_scatter.c:123 Jul 30 22:14:54 xxx kernel: drm0: on vgapci0 Jul 30 22:14:54 xxx kernel: info: [drm] MSI enabled 1 message(s) Jul 30 22:14:54 xxx kernel: info: [drm] Detected an NV44 generation card (0x04e000a2) Jul 30 22:14:54 xxx kernel: vgapci0: child drm0 requested pci_enable_busmaster Jul 30 22:14:54 xxx kernel: info: [drm] Initialized nouveau 0.0.12 20060213 Jul 31 09:16:27 xxx kernel: drm0: on vgapci0 Jul 31 09:16:27 xxx kernel: info: [drm] MSI enabled 1 message(s) Jul 31 09:16:27 xxx kernel: info: [drm] Detected an NV44 generation card (0x04e000a2) Jul 31 09:16:27 xxx kernel: vgapci0: child drm0 requested pci_enable_busmaster Jul 31 09:16:27 xxx kernel: info: [drm] Initialized nouveau 0.0.12 20060213 Jul 31 09:19:34 xxx kernel: error: [drm:pid17956:drm_alloc_resource] *ERROR* Couldn't find resource 0x2 Jul 31 09:19:34 xxx kernel: exclusive sleep mutex drmdev (drmdev) r = 0 (0xffffff00269ae0a0) locked @ /usr/src/sys/modules/drm/drm/../../../dev/drm/drm_bufs.c:55 Jul 31 09:19:34 xxx kernel: drm_sg_alloc() at drm_sg_alloc+0x4b Jul 31 09:19:34 xxx kernel: nouveau_mem_init() at nouveau_mem_init+0x4f3 Jul 31 09:19:34 xxx kernel: nouveau_card_init() at nouveau_card_init+0x7c5 Jul 31 09:19:34 xxx kernel: nouveau_ioctl_card_init() at nouveau_ioctl_card_init+0x9 Jul 31 09:19:34 xxx kernel: drm_ioctl() at drm_ioctl+0x314 Jul 31 09:19:34 xxx kernel: panic: _mtx_lock_sleep: recursed on non-recursive mutex drmdev @ /usr/src/sys/modules/drm/drm/../../../dev/drm/drm_scatter.c:123 Jul 31 09:23:29 xxx kernel: drm0: on vgapci0 Jul 31 09:23:29 xxx kernel: info: [drm] MSI enabled 1 message(s) Jul 31 09:23:29 xxx kernel: info: [drm] Detected an NV44 generation card (0x04e000a2) Jul 31 09:23:29 xxx kernel: vgapci0: child drm0 requested pci_enable_busmaster Jul 31 09:23:29 xxx kernel: info: [drm] Initialized nouveau 0.0.12 20060213 From swell.k at gmail.com Fri Jul 31 22:01:53 2009 From: swell.k at gmail.com (Anonymous) Date: Fri Jul 31 22:01:59 2009 Subject: 8.0 beta2 (patched) - drm_bufs.c: system freeze In-Reply-To: <4a73541c.0c0db80a.214d.ffff9b89@mx.google.com> (albri's message of "Fri, 31 Jul 2009 22:29:12 +0200") References: <4a73541c.0c0db80a.214d.ffff9b89@mx.google.com> Message-ID: <86eirwjyus.fsf@gmail.com> albri writes: > hello list, > here is an information what does not function on one system: > a patched drm with rnoland's patch drm-nouveau-043009.patch and a > daily fresh xf86-video-nouveau causes system to freeze. [...] Are you using xf86-video-nouveau from git-master and libdrm from ports? Can you try xf86-video-nouveau from ports tree, then?